aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorSpencer Oliver <spen@spen-soft.co.uk>2013-02-01 15:34:51 +0000
committerFreddie Chopin <freddie.chopin@gmail.com>2013-04-28 08:55:31 +0000
commitb7d2cdc0d4fc319169c60362708a67e2ff626525 (patch)
tree1ad1b79b7ff26c47023d30fee6fc7e38266f1ecc
parent564a5eb5375aa8117ee4fe48899f07490da8ae8a (diff)
target: rename cortex_m3 to cortex_m
Rename cortex_m3 target to use a more correct cortex_m name. This also adds a deprecated_name var so that older scripts issue a warning to update the target name. cfg files have also been updated to the new target name. Change-Id: Ia8429f38e88da677249c5caa560c50f8ce56ea10 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1129 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Diffstat
-rw-r--r--doc/openocd.texi30
-rw-r--r--src/rtos/ChibiOS.c2
-rw-r--r--src/rtos/FreeRTOS.c2
-rw-r--r--src/rtos/ThreadX.c2
-rw-r--r--src/rtos/eCos.c2
-rw-r--r--src/target/cortex_m.c7
-rw-r--r--src/target/startup.tcl6
-rw-r--r--tcl/target/at91sam3XXX.cfg4
-rw-r--r--tcl/target/at91sam3nXX.cfg4
-rw-r--r--tcl/target/at91sam4XXX.cfg4
-rw-r--r--tcl/target/fm3.cfg4
-rw-r--r--tcl/target/k40.cfg4
-rw-r--r--tcl/target/k60.cfg4
-rw-r--r--tcl/target/lpc1788.cfg2
-rw-r--r--tcl/target/lpc17xx.cfg4
-rw-r--r--tcl/target/lpc1850.cfg4
-rw-r--r--tcl/target/lpc4350.cfg6
-rw-r--r--tcl/target/omap4430.cfg4
-rw-r--r--tcl/target/omap4460.cfg4
-rw-r--r--tcl/target/stellaris.cfg6
-rw-r--r--tcl/target/stm32f1x.cfg4
-rw-r--r--tcl/target/stm32f2x.cfg4
-rw-r--r--tcl/target/stm32f3x.cfg4
-rw-r--r--tcl/target/stm32f4x.cfg4
-rw-r--r--tcl/target/stm32l.cfg4
25 files changed, 66 insertions, 59 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi
index 15186171..2af9e60d 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -986,7 +986,7 @@ that the @code{reset-init} event handler does.
Likewise, the @command{arm9 vector_catch} command (or
@cindex vector_catch
its siblings @command{xscale vector_catch}
-and @command{cortex_m3 vector_catch}) can be a timesaver
+and @command{cortex_m vector_catch}) can be a timesaver
during some debug sessions, but don't make everyone use that either.
Keep those kinds of debugging aids in your user config file,
along with messaging and tracing setup.
@@ -1948,7 +1948,7 @@ don't want to reset all targets at once.
Such a handler might write to chip registers to force a reset,
use a JRC to do that (preferable -- the target may be wedged!),
or force a watchdog timer to trigger.
-(For Cortex-M3 targets, this is not necessary. The target
+(For Cortex-M targets, this is not necessary. The target
driver knows how to use trigger an NVIC reset when SRST is
not available.)
@@ -3953,7 +3953,7 @@ look like with more than one:
TargetName Type Endian TapName State
-- ------------------ ---------- ------ ------------------ ------------
0* at91rm9200.cpu arm920t little at91rm9200.cpu running
- 1 MyTarget cortex_m3 little mychip.foo tap-disabled
+ 1 MyTarget cortex_m little mychip.foo tap-disabled
@end verbatim
One member of that list is the @dfn{current target}, which
@@ -4065,7 +4065,7 @@ At this writing, the supported CPU types and variants are:
@item @code{avr} -- implements Atmel's 8-bit AVR instruction set.
(Support for this is preliminary and incomplete.)
@item @code{cortex_a8} -- this is an ARMv7 core with an MMU
-@item @code{cortex_m3} -- this is an ARMv7 core, supporting only the
+@item @code{cortex_m} -- this is an ARMv7 core, supporting only the
compact Thumb2 instruction set.
@item @code{dragonite} -- resembles arm966e
@item @code{dsp563xx} -- implements Freescale's 24-bit DSP.
@@ -4119,7 +4119,7 @@ to be much more board-specific.
The key steps you use might look something like this
@example
-target create MyTarget cortex_m3 -chain-position mychip.cpu
+target create MyTarget cortex_m -chain-position mychip.cpu
$MyTarget configure -work-area-phys 0x08000 -work-area-size 8096
$MyTarget configure -event reset-deassert-pre @{ jtag_rclk 5 @}
$MyTarget configure -event reset-init @{ myboard_reinit @}
@@ -7300,7 +7300,7 @@ cores @emph{except the ARM1176} use the same six bits.
@cindex Debug Access Port
@cindex DAP
These commands are specific to ARM architecture v7 Debug Access Port (DAP),
-included on Cortex-M3 and Cortex-A8 systems.
+included on Cortex-M and Cortex-A8 systems.
They are available in addition to other core-specific commands that may be available.
@deffn Command {dap apid} [num]
@@ -7333,10 +7333,10 @@ fix CSW_SPROT from register AP_REG_CSW on selected dap.
Defaulting to 0.
@end deffn
-@subsection Cortex-M3 specific commands
-@cindex Cortex-M3
+@subsection Cortex-M specific commands
+@cindex Cortex-M
-@deffn Command {cortex_m3 maskisr} (@option{auto}|@option{on}|@option{off})
+@deffn Command {cortex_m maskisr} (@option{auto}|@option{on}|@option{off})
Control masking (disabling) interrupts during target step/resume.
The @option{auto} option handles interrupts during stepping a way they get
@@ -7353,7 +7353,7 @@ with interrupts enabled, i.e. the same way the @option{off} option does.
Default is @option{auto}.
@end deffn
-@deffn Command {cortex_m3 vector_catch} [@option{all}|@option{none}|list]
+@deffn Command {cortex_m vector_catch} [@option{all}|@option{none}|list]
@cindex vector_catch
Vector Catch hardware provides dedicated breakpoints
for certain hardware events.
@@ -7380,7 +7380,7 @@ must also be explicitly enabled.
This finishes by listing the current vector catch configuration.
@end deffn
-@deffn Command {cortex_m3 reset_config} (@option{srst}|@option{sysresetreq}|@option{vectreset})
+@deffn Command {cortex_m reset_config} (@option{srst}|@option{sysresetreq}|@option{vectreset})
Control reset handling. The default @option{srst} is to use srst if fitted,
otherwise fallback to @option{vectreset}.
@itemize @minus
@@ -7388,7 +7388,7 @@ otherwise fallback to @option{vectreset}.
@item @option{sysresetreq} use NVIC SYSRESETREQ to reset system.
@item @option{vectreset} use NVIC VECTRESET to reset system.
@end itemize
-Using @option{vectreset} is a safe option for all current Cortex-M3 cores.
+Using @option{vectreset} is a safe option for all current Cortex-M cores.
This however has the disadvantage of only resetting the core, all peripherals
are uneffected. A solution would be to use a @code{reset-init} event handler to manually reset
the peripherals.
@@ -7407,7 +7407,7 @@ The most powerful mechanism is semihosting, but there is also
a lighter weight mechanism using only the DCC channel.
Currently @command{target_request debugmsgs}
-is supported only for @option{arm7_9} and @option{cortex_m3} cores.
+is supported only for @option{arm7_9} and @option{cortex_m} cores.
These messages are received as part of target polling, so
you need to have @command{poll on} active to receive them.
They are intrusive in that they will affect program execution
@@ -7913,10 +7913,10 @@ and an RTOS until he told GDB to disable the IRQs while stepping:
@example
define hook-step
-mon cortex_m3 maskisr on
+mon cortex_m maskisr on
end
define hookpost-step
-mon cortex_m3 maskisr off
+mon cortex_m maskisr off
end
@end example
diff --git a/src/rtos/ChibiOS.c b/src/rtos/ChibiOS.c
index cf590b7f..e0424c69 100644
--- a/src/rtos/ChibiOS.c
+++ b/src/rtos/ChibiOS.c
@@ -94,7 +94,7 @@ struct ChibiOS_params {
struct ChibiOS_params ChibiOS_params_list[] = {
{
- "cortex_m3", /* target_name */
+ "cortex_m", /* target_name */
0,
NULL, /* stacking_info */
},
diff --git a/src/rtos/FreeRTOS.c b/src/rtos/FreeRTOS.c
index acf3689f..51bd35e4 100644
--- a/src/rtos/FreeRTOS.c
+++ b/src/rtos/FreeRTOS.c
@@ -50,7 +50,7 @@ struct FreeRTOS_params {
const struct FreeRTOS_params FreeRTOS_params_list[] = {
{
- "cortex_m3", /* target_name */
+ "cortex_m", /* target_name */
4, /* thread_count_width; */
4, /* pointer_width; */
16, /* list_next_offset; */
diff --git a/src/rtos/ThreadX.c b/src/rtos/ThreadX.c
index 571814cb..86a24998 100644
--- a/src/rtos/ThreadX.c
+++ b/src/rtos/ThreadX.c
@@ -73,7 +73,7 @@ struct ThreadX_params {
const struct ThreadX_params ThreadX_params_list[] = {
{
- "cortex_m3", /* target_name */
+ "cortex_m", /* target_name */
4, /* pointer_width; */
8, /* thread_stack_offset; */
40, /* thread_name_offset; */
diff --git a/src/rtos/eCos.c b/src/rtos/eCos.c
index 6a0ed4ec..f2c7f712 100644
--- a/src/rtos/eCos.c
+++ b/src/rtos/eCos.c
@@ -64,7 +64,7 @@ struct eCos_params {
const struct eCos_params eCos_params_list[] = {
{
- "cortex_m3", /* target_name */
+ "cortex_m", /* target_name */
4, /* pointer_width; */
0x0c, /* thread_stack_offset; */
0x9c, /* thread_name_offset; */
diff --git a/src/target/cortex_m.c b/src/target/cortex_m.c
index 7094b070..6fba9259 100644
--- a/src/target/cortex_m.c
+++ b/src/target/cortex_m.c
@@ -2256,9 +2256,9 @@ static const struct command_registration cortex_m3_command_handlers[] = {
.chain = armv7m_command_handlers,
},
{
- .name = "cortex_m3",
+ .name = "cortex_m",
.mode = COMMAND_EXEC,
- .help = "Cortex-M3 command group",
+ .help = "Cortex-M command group",
.usage = "",
.chain = cortex_m3_exec_command_handlers,
},
@@ -2266,7 +2266,8 @@ static const struct command_registration cortex_m3_command_handlers[] = {
};
struct target_type cortexm3_target = {
- .name = "cortex_m3",
+ .name = "cortex_m",
+ .deprecated_name = "cortex_m3",
.poll = cortex_m3_poll,
.arch_state = armv7m_arch_state,
diff --git a/src/target/startup.tcl b/src/target/startup.tcl
index 90f947df..0c72cc71 100644
--- a/src/target/startup.tcl
+++ b/src/target/startup.tcl
@@ -167,3 +167,9 @@ proc init_targets {} {
# Additionally board config scripts can define a procedure init_board that will be executed after init and init_targets
proc init_board {} {
}
+
+# deprecated target name cmds
+proc cortex_m3 args {
+ echo "DEPRECATED! use 'cortex_m' not 'cortex_m3'"
+ eval cortex_m $args
+}
diff --git a/tcl/target/at91sam3XXX.cfg b/tcl/target/at91sam3XXX.cfg
index b90e3f01..075b462d 100644
--- a/tcl/target/at91sam3XXX.cfg
+++ b/tcl/target/at91sam3XXX.cfg
@@ -58,7 +58,7 @@ if { [info exists CPUTAPID] } {
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
# 16K is plenty, the smallest chip has this much
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0
@@ -69,4 +69,4 @@ $_TARGETNAME configure -event gdb-flash-erase-start {
# if srst is not fitted use SYSRESETREQ to
# perform a soft reset
-cortex_m3 reset_config sysresetreq
+cortex_m reset_config sysresetreq
diff --git a/tcl/target/at91sam3nXX.cfg b/tcl/target/at91sam3nXX.cfg
index b628103c..32f163e3 100644
--- a/tcl/target/at91sam3nXX.cfg
+++ b/tcl/target/at91sam3nXX.cfg
@@ -18,12 +18,12 @@ if { [info exists CPUTAPID] } {
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -endian little -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian little -chain-position $_TARGETNAME
set _FLASHNAME $_CHIPNAME.flash
flash bank flash0 at91sam3 0x00400000 0 0 0 $_TARGETNAME
# if srst is not fitted use SYSRESETREQ to
# perform a soft reset
-cortex_m3 reset_config sysresetreq
+cortex_m reset_config sysresetreq
diff --git a/tcl/target/at91sam4XXX.cfg b/tcl/target/at91sam4XXX.cfg
index c3412184..24b3deb8 100644
--- a/tcl/target/at91sam4XXX.cfg
+++ b/tcl/target/at91sam4XXX.cfg
@@ -35,7 +35,7 @@ if { [info exists CPUTAPID] } {
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
# 16K is plenty, the smallest chip has this much
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0
@@ -46,4 +46,4 @@ $_TARGETNAME configure -event gdb-flash-erase-start {
# if srst is not fitted use SYSRESETREQ to
# perform a soft reset
-cortex_m3 reset_config sysresetreq
+cortex_m reset_config sysresetreq
diff --git a/tcl/target/fm3.cfg b/tcl/target/fm3.cfg
index 60967e92..e81fcc89 100644
--- a/tcl/target/fm3.cfg
+++ b/tcl/target/fm3.cfg
@@ -29,7 +29,7 @@ reset_config trst_only
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
# MB9BF506 has 64kB of SRAM on its main system bus
$_TARGETNAME configure -work-area-phys 0x1FFF8000 -work-area-size 0x10000 -work-area-backup 0
@@ -44,4 +44,4 @@ adapter_khz 500
# if srst is not fitted use SYSRESETREQ to
# perform a soft reset
-cortex_m3 reset_config sysresetreq
+cortex_m reset_config sysresetreq
diff --git a/tcl/target/k40.cfg b/tcl/target/k40.cfg
index 57aa8492..ec550288 100644
--- a/tcl/target/k40.cfg
+++ b/tcl/target/k40.cfg
@@ -29,11 +29,11 @@ set _TARGETNAME $_CHIPNAME.cpu
swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-target create $_TARGETNAME cortex_m3 -chain-position $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.cpu
$_CHIPNAME.cpu configure -event examine-start { puts "START..." ; }
$_CHIPNAME.cpu configure -event examine-end { puts "END..." ; }
# if srst is not fitted use SYSRESETREQ to
# perform a soft reset
-cortex_m3 reset_config sysresetreq
+cortex_m reset_config sysresetreq
diff --git a/tcl/target/k60.cfg b/tcl/target/k60.cfg
index a85fa909..7ac8bb59 100644
--- a/tcl/target/k60.cfg
+++ b/tcl/target/k60.cfg
@@ -29,11 +29,11 @@ set _TARGETNAME $_CHIPNAME.cpu
swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-target create $_TARGETNAME cortex_m3 -chain-position $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.cpu
$_CHIPNAME.cpu configure -event examine-start { puts "START..." ; }
$_CHIPNAME.cpu configure -event examine-end { puts "END..." ; }
# if srst is not fitted use SYSRESETREQ to
# perform a soft reset
-cortex_m3 reset_config sysresetreq
+cortex_m reset_config sysresetreq
diff --git a/tcl/target/lpc1788.cfg b/tcl/target/lpc1788.cfg
index 16b62c8a..e986353e 100644
--- a/tcl/target/lpc1788.cfg
+++ b/tcl/target/lpc1788.cfg
@@ -17,4 +17,4 @@ set CCLK 12000
source [find target/lpc17xx.cfg];
# if srst is not fitted, use SYSRESETREQ to perform a soft reset
-cortex_m3 reset_config sysresetreq
+cortex_m reset_config sysresetreq
diff --git a/tcl/target/lpc17xx.cfg b/tcl/target/lpc17xx.cfg
index a64783da..01a8cd37 100644
--- a/tcl/target/lpc17xx.cfg
+++ b/tcl/target/lpc17xx.cfg
@@ -57,7 +57,7 @@ jtag_ntrst_delay 200
swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME
# The LPC17xx devices have 8/16/32kB of SRAM In the ARMv7-M "Code" area (at 0x10000000)
$_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size $_CPURAMSIZE
@@ -94,4 +94,4 @@ $_TARGETNAME configure -event reset-init {
# if srst is not fitted use VECTRESET to
# perform a soft reset - SYSRESETREQ is not supported
-cortex_m3 reset_config vectreset
+cortex_m reset_config vectreset
diff --git a/tcl/target/lpc1850.cfg b/tcl/target/lpc1850.cfg
index 1ea7a49e..94aec38f 100644
--- a/tcl/target/lpc1850.cfg
+++ b/tcl/target/lpc1850.cfg
@@ -24,8 +24,8 @@ if { [info exists M3_JTAG_TAPID] } {
jtag newtap $_CHIPNAME m3 -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_M3_JTAG_TAPID
set _TARGETNAME $_CHIPNAME.m3
-target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
# if srst is not fitted use SYSRESETREQ to
# perform a soft reset
-cortex_m3 reset_config sysresetreq
+cortex_m reset_config sysresetreq
diff --git a/tcl/target/lpc4350.cfg b/tcl/target/lpc4350.cfg
index fbbea97d..47f25296 100644
--- a/tcl/target/lpc4350.cfg
+++ b/tcl/target/lpc4350.cfg
@@ -40,12 +40,12 @@ jtag newtap $_CHIPNAME m4 -irlen 4 -ircapture 0x1 -irmask 0xf \
jtag newtap $_CHIPNAME m0 -irlen 4 -ircapture 0x1 -irmask 0xf \
-expected-id $_M0_JTAG_TAPID
-target create $_CHIPNAME.m4 cortex_m3 -chain-position $_CHIPNAME.m4
-target create $_CHIPNAME.m0 cortex_m3 -chain-position $_CHIPNAME.m0
+target create $_CHIPNAME.m4 cortex_m -chain-position $_CHIPNAME.m4
+target create $_CHIPNAME.m0 cortex_m -chain-position $_CHIPNAME.m0
# on this CPU we should use VECTRESET to perform a soft reset and
# manually reset the periphery
# SRST or SYSRESETREQ disable the debug interface for the time of
# the reset and will not fit our requirements for a consistent debug
# session
-cortex_m3 reset_config vectreset
+cortex_m reset_config vectreset
diff --git a/tcl/target/omap4430.cfg b/tcl/target/omap4430.cfg
index f16d7488..2e9f5543 100644
--- a/tcl/target/omap4430.cfg
+++ b/tcl/target/omap4430.cfg
@@ -104,8 +104,8 @@ $_TARGETNAME configure -work-area-phys 0x40300000 -work-area-size 0x1000
#
# M3 targets, separate TAP/DAP for each core
#
-target create $_CHIPNAME.m30 cortex_m3 -chain-position $_CHIPNAME.m30_dap
-target create $_CHIPNAME.m31 cortex_m3 -chain-position $_CHIPNAME.m31_dap
+target create $_CHIPNAME.m30 cortex_m -chain-position $_CHIPNAME.m30_dap
+target create $_CHIPNAME.m31 cortex_m -chain-position $_CHIPNAME.m31_dap
# Once the JRC is up, enable our TAPs
diff --git a/tcl/target/omap4460.cfg b/tcl/target/omap4460.cfg
index 6e8acda5..5fdd654d 100644
--- a/tcl/target/omap4460.cfg
+++ b/tcl/target/omap4460.cfg
@@ -104,8 +104,8 @@ $_TARGETNAME configure -work-area-phys 0x40300000 -work-area-size 0x1000
#
# M3 targets, separate TAP/DAP for each core
#
-target create $_CHIPNAME.m30 cortex_m3 -chain-position $_CHIPNAME.m30_dap
-target create $_CHIPNAME.m31 cortex_m3 -chain-position $_CHIPNAME.m31_dap
+target create $_CHIPNAME.m30 cortex_m -chain-position $_CHIPNAME.m30_dap
+target create $_CHIPNAME.m31 cortex_m -chain-position $_CHIPNAME.m31_dap
# Once the JRC is up, enable our TAPs
diff --git a/tcl/target/stellaris.cfg b/tcl/target/stellaris.cfg
index 06f27c56..9804bde7 100644
--- a/tcl/target/stellaris.cfg
+++ b/tcl/target/stellaris.cfg
@@ -52,7 +52,7 @@ if { [info exists WORKAREASIZE] } {
}
set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -chain-position $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.cpu
# 8K working area at base of ram, not backed up
#
@@ -157,11 +157,11 @@ $_TARGETNAME configure -event reset-start {
if {$device_class == 0 || $device_class == 1 ||
$device_class == 3 || $device_class == 5} {
# Sandstorm, Fury, DustDevil and Blizzard are able to use NVIC SYSRESETREQ
- cortex_m3 reset_config sysresetreq
+ cortex_m reset_config sysresetreq
} else {
# Tempest and Firestorm default to using NVIC VECTRESET
# peripherals will need reseting manually, see proc reset_peripherals
- cortex_m3 reset_config vectreset
+ cortex_m reset_config vectreset
# reset peripherals, based on code in
# http://www.ti.com/lit/er/spmz573a/spmz573a.pdf
diff --git a/tcl/target/stm32f1x.cfg b/tcl/target/stm32f1x.cfg
index a686e51a..7d3f42f3 100644
--- a/tcl/target/stm32f1x.cfg
+++ b/tcl/target/stm32f1x.cfg
@@ -68,7 +68,7 @@ jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID1 \
-expected-id $_BSTAPID8 -expected-id $_BSTAPID9
set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
@@ -78,4 +78,4 @@ flash bank $_FLASHNAME stm32f1x 0x08000000 0 0 0 $_TARGETNAME
# if srst is not fitted use SYSRESETREQ to
# perform a soft reset
-cortex_m3 reset_config sysresetreq
+cortex_m reset_config sysresetreq
diff --git a/tcl/target/stm32f2x.cfg b/tcl/target/stm32f2x.cfg
index cfd6274e..43a944c1 100644
--- a/tcl/target/stm32f2x.cfg
+++ b/tcl/target/stm32f2x.cfg
@@ -52,7 +52,7 @@ if { [info exists BSTAPID] } {
jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID
set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
@@ -61,4 +61,4 @@ flash bank $_FLASHNAME stm32f2x 0 0 0 0 $_TARGETNAME
# if srst is not fitted use SYSRESETREQ to
# perform a soft reset
-cortex_m3 reset_config sysresetreq
+cortex_m reset_config sysresetreq
diff --git a/tcl/target/stm32f3x.cfg b/tcl/target/stm32f3x.cfg
index 31993ff8..d092b6c8 100644
--- a/tcl/target/stm32f3x.cfg
+++ b/tcl/target/stm32f3x.cfg
@@ -52,7 +52,7 @@ if { [info exists BSTAPID] } {
jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID1 -expected-id $_BSTAPID2
set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
@@ -61,4 +61,4 @@ flash bank $_FLASHNAME stm32f1x 0 0 0 0 $_TARGETNAME
# if srst is not fitted use SYSRESETREQ to
# perform a soft reset
-cortex_m3 reset_config sysresetreq
+cortex_m reset_config sysresetreq
diff --git a/tcl/target/stm32f4x.cfg b/tcl/target/stm32f4x.cfg
index 16beaa46..374c3371 100644
--- a/tcl/target/stm32f4x.cfg
+++ b/tcl/target/stm32f4x.cfg
@@ -51,7 +51,7 @@ if { [info exists BSTAPID] } {
jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID
set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
@@ -60,4 +60,4 @@ flash bank $_FLASHNAME stm32f2x 0 0 0 0 $_TARGETNAME
# if srst is not fitted use SYSRESETREQ to
# perform a soft reset
-cortex_m3 reset_config sysresetreq
+cortex_m reset_config sysresetreq
diff --git a/tcl/target/stm32l.cfg b/tcl/target/stm32l.cfg
index eea082e6..8e6a10e1 100644
--- a/tcl/target/stm32l.cfg
+++ b/tcl/target/stm32l.cfg
@@ -48,7 +48,7 @@ if { [info exists BSTAPID] } {
jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID
set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
@@ -59,7 +59,7 @@ flash bank $_FLASHNAME stm32lx 0x08000000 0 0 0 $_TARGETNAME
# if srst is not fitted use SYSRESETREQ to
# perform a soft reset
-cortex_m3 reset_config sysresetreq
+cortex_m reset_config sysresetreq
proc stm32l_enable_HSI {} {
# Enable HSI as clock source
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-29 10:40:22 +0000