aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-at91
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-05-22 09:23:24 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-05-22 09:23:24 -0700
commit9bc747bea5fad819e0c0ad96e6a67ea0640dfe2b (patch)
treed500225e7a1c90a6bd17d3e63e2f6e781810db2b /arch/arm/mach-at91
parent32b908eea9e5ecd1049008e134eadbfcd0da5e38 (diff)
parent0e896b1ddc1905df904df98c204bacf028219729 (diff)
Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull first batch of arm-soc cleanups from Olof Johansson: "These cleanups are basically all over the place. The idea is to collect changes with minimal impact but large number of changes so we can avoid them from distracting in the diffstat in the other series. A significant number of lines get removed here, in particular because the ixp2000 and ixp23xx platforms get removed. These have never been extremely popular and have fallen into disuse over time with no active maintainer taking care of them. The u5500 soc never made it into a product, so we are removing it from the ux500 platform. Many good cleanups also went into the at91 and omap platforms, as has been the case for a number of releases." Trivial modify-delete conflicts in arch/arm/mach-{ixp2000,ixp23xx} * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (152 commits) ARM: clps711x: Cleanup IRQ handling ARM clps711x: Removed unused header mach/time.h ARM: clps711x: Added note about support EP731x CPU to Kconfig ARM: clps711x: Added missing register definitions ARM: clps711x: Used own subarch directory for store header file Dove: Fix Section mismatch warnings ARM: orion5x: ts78xx debugging changes ARM: orion5x: remove PM dependency from ts78xx ARM: orion5x: ts78xx fix NAND resource off by one ARM: orion5x: ts78xx whitespace cleanups Orion5x: Fix Section mismatch warnings Orion5x: Fix warning: struct pci_dev declared inside paramter list ARM: clps711x: Combine header files into one for clps711x-targets ARM: S3C24XX: Use common macro to define resources on mach-qt2410.c ARM: S3C24XX: Use common macro to define resources on mach-osiris.c ARM: EXYNOS: Adapt to cpuidle core time keeping and irq enable ARM: S5PV210: Use common macro to define resources on mach-smdkv210.c ARM: S5PV210: Use common macro to define resources on dev-audio.c ARM: S5PC100: Use common macro to define resources on dev-audio.c ARM: S5P64X0: Use common macro to define resources on dev-audio.c ...
Diffstat (limited to 'arch/arm/mach-at91')
-rw-r--r--arch/arm/mach-at91/Kconfig186
-rw-r--r--arch/arm/mach-at91/Makefile26
-rw-r--r--arch/arm/mach-at91/at91rm9200.c12
-rw-r--r--arch/arm/mach-at91/at91rm9200_devices.c12
-rw-r--r--arch/arm/mach-at91/at91sam9260.c12
-rw-r--r--arch/arm/mach-at91/at91sam9260_devices.c12
-rw-r--r--arch/arm/mach-at91/at91sam9261.c12
-rw-r--r--arch/arm/mach-at91/at91sam9261_devices.c12
-rw-r--r--arch/arm/mach-at91/at91sam9263.c12
-rw-r--r--arch/arm/mach-at91/at91sam9263_devices.c12
-rw-r--r--arch/arm/mach-at91/at91sam9g45.c12
-rw-r--r--arch/arm/mach-at91/at91sam9g45_devices.c12
-rw-r--r--arch/arm/mach-at91/at91sam9rl.c12
-rw-r--r--arch/arm/mach-at91/at91sam9rl_devices.c12
-rw-r--r--arch/arm/mach-at91/board-1arm.c24
-rw-r--r--arch/arm/mach-at91/board-afeb-9260v1.c28
-rw-r--r--arch/arm/mach-at91/board-cam60.c8
-rw-r--r--arch/arm/mach-at91/board-carmeva.c18
-rw-r--r--arch/arm/mach-at91/board-cpu9krea.c52
-rw-r--r--arch/arm/mach-at91/board-cpuat91.c40
-rw-r--r--arch/arm/mach-at91/board-csb337.c13
-rw-r--r--arch/arm/mach-at91/board-csb637.c8
-rw-r--r--arch/arm/mach-at91/board-dt.c8
-rw-r--r--arch/arm/mach-at91/board-eb9200.c24
-rw-r--r--arch/arm/mach-at91/board-ecbat91.c20
-rw-r--r--arch/arm/mach-at91/board-eco920.c13
-rw-r--r--arch/arm/mach-at91/board-flexibity.c8
-rw-r--r--arch/arm/mach-at91/board-foxg20.c71
-rw-r--r--arch/arm/mach-at91/board-gsia18s.c63
-rw-r--r--arch/arm/mach-at91/board-kafa.c20
-rw-r--r--arch/arm/mach-at91/board-kb9202.c32
-rw-r--r--arch/arm/mach-at91/board-neocore926.c14
-rw-r--r--arch/arm/mach-at91/board-pcontrol-g20.c21
-rw-r--r--arch/arm/mach-at91/board-picotux200.c18
-rw-r--r--arch/arm/mach-at91/board-qil-a9260.c31
-rw-r--r--arch/arm/mach-at91/board-rm9200dk.c24
-rw-r--r--arch/arm/mach-at91/board-rm9200ek.c24
-rw-r--r--arch/arm/mach-at91/board-rsi-ews.c36
-rw-r--r--arch/arm/mach-at91/board-sam9-l9260.c30
-rw-r--r--arch/arm/mach-at91/board-sam9260ek.c24
-rw-r--r--arch/arm/mach-at91/board-sam9261ek.c14
-rw-r--r--arch/arm/mach-at91/board-sam9263ek.c14
-rw-r--r--arch/arm/mach-at91/board-sam9g20ek.c24
-rw-r--r--arch/arm/mach-at91/board-sam9m10g45ek.c16
-rw-r--r--arch/arm/mach-at91/board-sam9rlek.c14
-rw-r--r--arch/arm/mach-at91/board-snapper9260.c18
-rw-r--r--arch/arm/mach-at91/board-stamp9g20.c64
-rw-r--r--arch/arm/mach-at91/board-usb-a926x.c8
-rw-r--r--arch/arm/mach-at91/board-yl-9200.c36
-rw-r--r--arch/arm/mach-at91/cpuidle.c8
-rw-r--r--arch/arm/mach-at91/generic.h11
-rw-r--r--arch/arm/mach-at91/include/mach/at91rm9200.h5
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9260.h7
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9261.h4
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9263.h4
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9g45.h5
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9rl.h5
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9x5.h8
-rw-r--r--arch/arm/mach-at91/include/mach/board.h1
-rw-r--r--arch/arm/mach-at91/include/mach/cpu.h28
-rw-r--r--arch/arm/mach-at91/include/mach/hardware.h16
-rw-r--r--arch/arm/mach-at91/include/mach/uncompress.h178
-rw-r--r--arch/arm/mach-at91/pm.c12
-rw-r--r--arch/arm/mach-at91/pm.h15
-rw-r--r--arch/arm/mach-at91/pm_slowclock.S2
-rw-r--r--arch/arm/mach-at91/soc.h14
66 files changed, 659 insertions, 900 deletions
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 45db05d8d94..98a42f3472d 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -9,15 +9,6 @@ config HAVE_AT91_DBGU0
config HAVE_AT91_DBGU1
bool
-config HAVE_AT91_USART3
- bool
-
-config HAVE_AT91_USART4
- bool
-
-config HAVE_AT91_USART5
- bool
-
config AT91_SAM9_ALT_RESET
bool
default !ARCH_AT91X40
@@ -26,87 +17,121 @@ config AT91_SAM9G45_RESET
bool
default !ARCH_AT91X40
+config SOC_AT91SAM9
+ bool
+ select GENERIC_CLOCKEVENTS
+ select CPU_ARM926T
+
menu "Atmel AT91 System-on-Chip"
-choice
- prompt "Atmel AT91 Processor"
+comment "Atmel AT91 Processor"
-config ARCH_AT91RM9200
+config SOC_AT91SAM9
+ bool
+ select CPU_ARM926T
+ select AT91_SAM9_TIME
+ select AT91_SAM9_SMC
+
+config SOC_AT91RM9200
bool "AT91RM9200"
select CPU_ARM920T
select GENERIC_CLOCKEVENTS
select HAVE_AT91_DBGU0
- select HAVE_AT91_USART3
-config ARCH_AT91SAM9260
- bool "AT91SAM9260 or AT91SAM9XE"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
+config SOC_AT91SAM9260
+ bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
+ select SOC_AT91SAM9
select HAVE_AT91_DBGU0
- select HAVE_AT91_USART3
- select HAVE_AT91_USART4
- select HAVE_AT91_USART5
select HAVE_NET_MACB
+ help
+ Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
+ or AT91SAM9G20 SoC.
-config ARCH_AT91SAM9261
- bool "AT91SAM9261"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
+config SOC_AT91SAM9261
+ bool "AT91SAM9261 or AT91SAM9G10"
+ select SOC_AT91SAM9
+ select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
+ help
+ Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
+
+config SOC_AT91SAM9263
+ bool "AT91SAM9263"
+ select SOC_AT91SAM9
+ select HAVE_AT91_DBGU1
+ select HAVE_FB_ATMEL
+ select HAVE_NET_MACB
+
+config SOC_AT91SAM9RL
+ bool "AT91SAM9RL"
+ select SOC_AT91SAM9
select HAVE_AT91_DBGU0
+ select HAVE_FB_ATMEL
-config ARCH_AT91SAM9G10
- bool "AT91SAM9G10"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
+config SOC_AT91SAM9G45
+ bool "AT91SAM9G45 or AT91SAM9M10 families"
+ select SOC_AT91SAM9
+ select HAVE_AT91_DBGU1
+ select HAVE_FB_ATMEL
+ select HAVE_NET_MACB
+ help
+ Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
+ This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
+
+config SOC_AT91SAM9X5
+ bool "AT91SAM9x5 family"
+ select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
+ select HAVE_NET_MACB
+ help
+ Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
+ This means that your SAM9 name finishes with a '5' (except if it is
+ AT91SAM9G45!).
+ This support covers AT91SAM9G15, AT91SAM9G25, AT91SAM9X25, AT91SAM9G35
+ and AT91SAM9X35.
+
+choice
+ prompt "Atmel AT91 Processor Devices for non DT boards"
+
+config ARCH_AT91_NONE
+ bool "None"
+
+config ARCH_AT91RM9200
+ bool "AT91RM9200"
+ select SOC_AT91RM9200
+
+config ARCH_AT91SAM9260
+ bool "AT91SAM9260 or AT91SAM9XE"
+ select SOC_AT91SAM9260
+
+config ARCH_AT91SAM9261
+ bool "AT91SAM9261"
+ select SOC_AT91SAM9261
+
+config ARCH_AT91SAM9G10
+ bool "AT91SAM9G10"
+ select SOC_AT91SAM9261
config ARCH_AT91SAM9263
bool "AT91SAM9263"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select HAVE_FB_ATMEL
- select HAVE_NET_MACB
- select HAVE_AT91_DBGU1
+ select SOC_AT91SAM9263
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select HAVE_AT91_USART3
- select HAVE_FB_ATMEL
- select HAVE_AT91_DBGU0
+ select SOC_AT91SAM9RL
config ARCH_AT91SAM9G20
bool "AT91SAM9G20"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select HAVE_AT91_DBGU0
- select HAVE_AT91_USART3
- select HAVE_AT91_USART4
- select HAVE_AT91_USART5
- select HAVE_NET_MACB
+ select SOC_AT91SAM9260
config ARCH_AT91SAM9G45
bool "AT91SAM9G45"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select HAVE_AT91_USART3
- select HAVE_FB_ATMEL
- select HAVE_NET_MACB
- select HAVE_AT91_DBGU1
-
-config ARCH_AT91SAM9X5
- bool "AT91SAM9x5 family"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select HAVE_FB_ATMEL
- select HAVE_NET_MACB
- select HAVE_AT91_DBGU0
+ select SOC_AT91SAM9G45
config ARCH_AT91X40
bool "AT91x40"
+ depends on !MMU
select ARCH_USES_GETTIMEOFFSET
endchoice
@@ -364,6 +389,7 @@ config MACH_AT91SAM9G20EK_2MMC
Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
onwards.
+ <http://www.atmel.com/tools/SAM9G20-EK.aspx>
config MACH_CPU9G20
bool "Eukrea CPU9G20 board"
@@ -433,9 +459,10 @@ comment "AT91SAM9G45 Board Type"
config MACH_AT91SAM9M10G45EK
bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
help
- Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
- "ES" at the end of the name means that this board is an
- Engineering Sample.
+ Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
+ Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
+ families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
+ <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
endif
@@ -515,41 +542,6 @@ config AT91_TIMER_HZ
system clock (of at least several MHz), rounding is less of a
problem so it can be safer to use a decimal values like 100.
-choice
- prompt "Select a UART for early kernel messages"
-
-config AT91_EARLY_DBGU0
- bool "DBGU on rm9200, 9260/9g20, 9261/9g10 and 9rl"
- depends on HAVE_AT91_DBGU0
-
-config AT91_EARLY_DBGU1
- bool "DBGU on 9263 and 9g45"
- depends on HAVE_AT91_DBGU1
-
-config AT91_EARLY_USART0
- bool "USART0"
-
-config AT91_EARLY_USART1
- bool "USART1"
-
-config AT91_EARLY_USART2
- bool "USART2"
- depends on ! ARCH_AT91X40
-
-config AT91_EARLY_USART3
- bool "USART3"
- depends on HAVE_AT91_USART3
-
-config AT91_EARLY_USART4
- bool "USART4"
- depends on HAVE_AT91_USART4
-
-config AT91_EARLY_USART5
- bool "USART5"
- depends on HAVE_AT91_USART5
-
-endchoice
-
endmenu
endif
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 8512e53bed9..79d0f60af0b 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -10,17 +10,25 @@ obj- :=
obj-$(CONFIG_AT91_PMC_UNIT) += clock.o
obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o
+obj-$(CONFIG_SOC_AT91SAM9) += at91sam926x_time.o sam9_smc.o
# CPU-specific support
-obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9X5) += at91sam9x5.o at91sam926x_time.o sam9_smc.o
+obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o at91rm9200_time.o
+obj-$(CONFIG_SOC_AT91SAM9260) += at91sam9260.o
+obj-$(CONFIG_SOC_AT91SAM9261) += at91sam9261.o
+obj-$(CONFIG_SOC_AT91SAM9263) += at91sam9263.o
+obj-$(CONFIG_SOC_AT91SAM9G45) += at91sam9g45.o
+obj-$(CONFIG_SOC_AT91SAM9X5) += at91sam9x5.o
+obj-$(CONFIG_SOC_AT91SAM9RL) += at91sam9rl.o
+
+obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45_devices.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
# AT91RM9200 board-specific support
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 89106792d06..26917687fc3 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -249,18 +249,6 @@ static void __init at91rm9200_register_clocks(void)
clk_register(&pck3);
}
-static struct clk_lookup console_clock_lookup;
-
-void __init at91rm9200_set_console_clock(int id)
-{
- if (id >= ARRAY_SIZE(usart_clocks_lookups))
- return;
-
- console_clock_lookup.con_id = "usart";
- console_clock_lookup.clk = usart_clocks_lookups[id].clk;
- clkdev_add(&console_clock_lookup);
-}
-
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 60c472861e5..e6b7d0533dd 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -1152,14 +1152,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
at91_uarts[portnr] = pdev;
}
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART) {
- atmel_default_console_device = at91_uarts[portnr];
- at91rm9200_set_console_clock(at91_uarts[portnr]->id);
- }
-}
-
void __init at91_add_device_serial(void)
{
int i;
@@ -1168,13 +1160,9 @@ void __init at91_add_device_serial(void)
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 46f77423329..a27bbec50ca 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -268,18 +268,6 @@ static void __init at91sam9260_register_clocks(void)
clk_register(&pck1);
}
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9260_set_console_clock(int id)
-{
- if (id >= ARRAY_SIZE(usart_clocks_lookups))
- return;
-
- console_clock_lookup.con_id = "usart";
- console_clock_lookup.clk = usart_clocks_lookups[id].clk;
- clkdev_add(&console_clock_lookup);
-}
-
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 5652dde4bbe..ad00fe91d37 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -1229,14 +1229,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
at91_uarts[portnr] = pdev;
}
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART) {
- atmel_default_console_device = at91_uarts[portnr];
- at91sam9260_set_console_clock(at91_uarts[portnr]->id);
- }
-}
-
void __init at91_add_device_serial(void)
{
int i;
@@ -1245,13 +1237,9 @@ void __init at91_add_device_serial(void)
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 7de81e6222f..c77d503d09d 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -239,18 +239,6 @@ static void __init at91sam9261_register_clocks(void)
clk_register(&hck1);
}
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9261_set_console_clock(int id)
-{
- if (id >= ARRAY_SIZE(usart_clocks_lookups))
- return;
-
- console_clock_lookup.con_id = "usart";
- console_clock_lookup.clk = usart_clocks_lookups[id].clk;
- clkdev_add(&console_clock_lookup);
-}
-
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 4db961a9308..9295e90b08f 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -1051,14 +1051,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
at91_uarts[portnr] = pdev;
}
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART) {
- atmel_default_console_device = at91_uarts[portnr];
- at91sam9261_set_console_clock(at91_uarts[portnr]->id);
- }
-}
-
void __init at91_add_device_serial(void)
{
int i;
@@ -1067,13 +1059,9 @@ void __init at91_add_device_serial(void)
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index ef301be6657..7fae36502fb 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -255,18 +255,6 @@ static void __init at91sam9263_register_clocks(void)
clk_register(&pck3);
}
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9263_set_console_clock(int id)
-{
- if (id >= ARRAY_SIZE(usart_clocks_lookups))
- return;
-
- console_clock_lookup.con_id = "usart";
- console_clock_lookup.clk = usart_clocks_lookups[id].clk;
- clkdev_add(&console_clock_lookup);
-}
-
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index fe99206de88..dfe5bc006d5 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -1461,14 +1461,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
at91_uarts[portnr] = pdev;
}
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART) {
- atmel_default_console_device = at91_uarts[portnr];
- at91sam9263_set_console_clock(at91_uarts[portnr]->id);
- }
-}
-
void __init at91_add_device_serial(void)
{
int i;
@@ -1477,13 +1469,9 @@ void __init at91_add_device_serial(void)
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index d222f8333da..f2054495a65 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -288,18 +288,6 @@ static void __init at91sam9g45_register_clocks(void)
clk_register(&pck1);
}
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9g45_set_console_clock(int id)
-{
- if (id >= ARRAY_SIZE(usart_clocks_lookups))
- return;
-
- console_clock_lookup.con_id = "usart";
- console_clock_lookup.clk = usart_clocks_lookups[id].clk;
- clkdev_add(&console_clock_lookup);
-}
-
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 6b008aee1df..db2f88c246f 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -1741,14 +1741,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
at91_uarts[portnr] = pdev;
}
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART) {
- atmel_default_console_device = at91_uarts[portnr];
- at91sam9g45_set_console_clock(at91_uarts[portnr]->id);
- }
-}
-
void __init at91_add_device_serial(void)
{
int i;
@@ -1757,13 +1749,9 @@ void __init at91_add_device_serial(void)
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index d9f2774f385..e420085a57e 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -232,18 +232,6 @@ static void __init at91sam9rl_register_clocks(void)
clk_register(&pck1);
}
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9rl_set_console_clock(int id)
-{
- if (id >= ARRAY_SIZE(usart_clocks_lookups))
- return;
-
- console_clock_lookup.con_id = "usart";
- console_clock_lookup.clk = usart_clocks_lookups[id].clk;
- clkdev_add(&console_clock_lookup);
-}
-
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index fe4ae22e856..9c0b1481a9a 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -1192,14 +1192,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
at91_uarts[portnr] = pdev;
}
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART) {
- atmel_default_console_device = at91_uarts[portnr];
- at91sam9rl_set_console_clock(at91_uarts[portnr]->id);
- }
-}
-
void __init at91_add_device_serial(void)
{
int i;
@@ -1208,13 +1200,9 @@ void __init at91_add_device_serial(void)
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 2628384aaae..271f994314a 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -47,20 +47,6 @@ static void __init onearm_init_early(void)
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata onearm_eth_data = {
@@ -82,6 +68,16 @@ static struct at91_udc_data __initdata onearm_udc_data = {
static void __init onearm_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&onearm_eth_data);
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 161efbaa102..b7d8aa7b81e 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -52,22 +52,6 @@ static void __init afeb9260_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1,
- ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR
- | ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -183,6 +167,18 @@ static struct at91_cf_data afeb9260_cf_data = {
static void __init afeb9260_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1,
+ ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR
+ | ATMEL_UART_DCD | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2,
+ ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&afeb9260_usbh_data);
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index c6d44ee0c77..29d3ef0a50f 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -49,12 +49,6 @@ static void __init cam60_init_early(void)
{
/* Initialize processor: 10 MHz crystal */
at91_initialize(10000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -175,6 +169,8 @@ static void __init cam60_add_device_nand(void)
static void __init cam60_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
/* SPI */
at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices));
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 59d9cf99753..44328a6d460 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -44,17 +44,6 @@ static void __init carmeva_init_early(void)
{
/* Initialize processor: 20.000 MHz crystal */
at91_initialize(20000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata carmeva_eth_data = {
@@ -139,6 +128,13 @@ static struct gpio_led carmeva_leds[] = {
static void __init carmeva_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&carmeva_eth_data);
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 5f3680e7c88..69951ec7dbf 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -52,34 +52,6 @@ static void __init cpu9krea_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DGBU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS |
- ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
- ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS |
- ATMEL_UART_RTS);
-
- /* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS |
- ATMEL_UART_RTS);
-
- /* USART3 on ttyS4. (Rx, Tx) */
- at91_register_uart(AT91SAM9260_ID_US3, 4, 0);
-
- /* USART4 on ttyS5. (Rx, Tx) */
- at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-
- /* USART5 on ttyS6. (Rx, Tx) */
- at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -352,6 +324,30 @@ static void __init cpu9krea_board_init(void)
/* NOR */
cpu9krea_add_device_nor();
/* Serial */
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS |
+ ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+ ATMEL_UART_DCD | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
+
+ /* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
+
+ /* USART3 on ttyS4. (Rx, Tx) */
+ at91_register_uart(AT91SAM9260_ID_US3, 4, 0);
+
+ /* USART4 on ttyS5. (Rx, Tx) */
+ at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+ /* USART5 on ttyS6. (Rx, Tx) */
+ at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&cpu9krea_usbh_data);
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index e094cc81fe2..895cf2dba61 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -59,28 +59,6 @@ static void __init cpuat91_init_early(void)
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS |
- ATMEL_UART_RTS);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS |
- ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
- ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* USART2 on ttyS3 (Rx, Tx) */
- at91_register_uart(AT91RM9200_ID_US2, 3, 0);
-
- /* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS |
- ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata cpuat91_eth_data = {
@@ -161,6 +139,24 @@ static struct platform_device *platform_devices[] __initdata = {
static void __init cpuat91_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS |
+ ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+ ATMEL_UART_DCD | ATMEL_UART_RI);
+
+ /* USART2 on ttyS3 (Rx, Tx) */
+ at91_register_uart(AT91RM9200_ID_US2, 3, 0);
+
+ /* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
at91_add_device_serial();
/* LEDs. */
at91_gpio_leds(cpuat91_leds, ARRAY_SIZE(cpuat91_leds));
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 1a1547b1ce4..cd813361cd2 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -47,15 +47,6 @@ static void __init csb337_init_early(void)
{
/* Initialize processor: 3.6864 MHz crystal */
at91_initialize(3686400);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-
- /* DBGU on ttyS0 */
- at91_register_uart(0, 0, 0);
-
- /* make console=ttyS0 the default */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata csb337_eth_data = {
@@ -228,7 +219,11 @@ static struct gpio_led csb_leds[] = {
static void __init csb337_board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
/* Serial */
+ /* DBGU on ttyS0 */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&csb337_eth_data);
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index f650bf39455..7c8b05a57d7 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -44,12 +44,6 @@ static void __init csb637_init_early(void)
{
/* Initialize processor: 3.6864 MHz crystal */
at91_initialize(3686400);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* make console=ttyS0 (ie, DBGU) the default */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata csb637_eth_data = {
@@ -118,6 +112,8 @@ static void __init csb637_board_init(void)
/* LED(s) */
at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&csb637_eth_data);
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index c18d4d30780..a1fce05aa7a 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -1,10 +1,6 @@
/*
* Setup code for AT91SAM Evaluation Kits with Device Tree support
*
- * Covers: * AT91SAM9G45-EKES board
- * * AT91SAM9M10-EKES board
- * * AT91SAM9M10G45-EK board
- *
* Copyright (C) 2011 Atmel,
* 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
*
@@ -49,9 +45,7 @@ static void __init at91_dt_device_init(void)
}
static const char *at91_dt_board_compat[] __initdata = {
- "atmel,at91sam9m10g45ek",
- "atmel,at91sam9x5ek",
- "calao,usb-a9g20",
+ "atmel,at91sam9",
NULL
};
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index d302ca3eeb6..bd101729798 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -44,20 +44,6 @@ static void __init eb9200_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART2 on ttyS2. (Rx, Tx) - IRDA */
- at91_register_uart(AT91RM9200_ID_US2, 2, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata eb9200_eth_data = {
@@ -101,6 +87,16 @@ static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
static void __init eb9200_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART2 on ttyS2. (Rx, Tx) - IRDA */
+ at91_register_uart(AT91RM9200_ID_US2, 2, 0);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&eb9200_eth_data);
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 69966ce4d77..89cc3726a9c 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -50,18 +50,6 @@ static void __init ecb_at91init_early(void)
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx & Tx only) */
- at91_register_uart(AT91RM9200_ID_US0, 1, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata ecb_at91eth_data = {
@@ -151,7 +139,15 @@ static struct spi_board_info __initdata ecb_at91spi_devices[] = {
static void __init ecb_at91board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx & Tx only) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, 0);
at91_add_device_serial();
/* Ethernet */
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index f23aabef855..558546cf63f 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -37,15 +37,6 @@ static void __init eco920_init_early(void)
at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
at91_initialize(18432000);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-
- /* DBGU on ttyS0. (Rx & Tx only */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata eco920_eth_data = {
@@ -103,6 +94,10 @@ static struct spi_board_info eco920_spi_devices[] = {
static void __init eco920_board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
+ /* DBGU on ttyS0. (Rx & Tx only */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
at91_add_device_eth(&eco920_eth_data);
at91_add_device_usbh(&eco920_usbh_data);
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 1815152001f..47658f78105 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -41,12 +41,6 @@ static void __init flexibity_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/* USB Host port */
@@ -143,6 +137,8 @@ static struct gpio_led flexibity_leds[] = {
static void __init flexibity_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&flexibity_usbh_data);
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index caf017f0f4e..33411e6ecb1 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -61,44 +61,6 @@ static void __init foxg20_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1,
- ATMEL_UART_CTS
- | ATMEL_UART_RTS
- | ATMEL_UART_DTR
- | ATMEL_UART_DSR
- | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2,
- ATMEL_UART_CTS
- | ATMEL_UART_RTS);
-
- /* USART2 on ttyS3. (Rx & Tx only) */
- at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
-
- /* USART3 on ttyS4. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US3, 4,
- ATMEL_UART_CTS
- | ATMEL_UART_RTS);
-
- /* USART4 on ttyS5. (Rx & Tx only) */
- at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-
- /* USART5 on ttyS6. (Rx & Tx only) */
- at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-
- /* Set the internal pull-up resistor on DRXD */
- at91_set_A_periph(AT91_PIN_PB14, 1);
-
}
/*
@@ -241,6 +203,39 @@ static struct i2c_board_info __initdata foxg20_i2c_devices[] = {
static void __init foxg20_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1,
+ ATMEL_UART_CTS
+ | ATMEL_UART_RTS
+ | ATMEL_UART_DTR
+ | ATMEL_UART_DSR
+ | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2,
+ ATMEL_UART_CTS
+ | ATMEL_UART_RTS);
+
+ /* USART2 on ttyS3. (Rx & Tx only) */
+ at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
+
+ /* USART3 on ttyS4. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US3, 4,
+ ATMEL_UART_CTS
+ | ATMEL_UART_RTS);
+
+ /* USART4 on ttyS5. (Rx & Tx only) */
+ at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+ /* USART5 on ttyS6. (Rx & Tx only) */
+ at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
+
+ /* Set the internal pull-up resistor on DRXD */
+ at91_set_A_periph(AT91_PIN_PB14, 1);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&foxg20_usbh_data);
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index 230e71969fb..3e0dfa643a8 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -41,38 +41,6 @@
static void __init gsia18s_init_early(void)
{
stamp9g20_init_early();
-
- /*
- * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI).
- * Used for Internal Analog Modem.
- */
- at91_register_uart(AT91SAM9260_ID_US0, 1,
- ATMEL_UART_CTS | ATMEL_UART_RTS |
- ATMEL_UART_DTR | ATMEL_UART_DSR |
- ATMEL_UART_DCD | ATMEL_UART_RI);
- /*
- * USART1 on ttyS2 (Rx, Tx, CTS, RTS).
- * Used for GPS or WiFi or Data stream.
- */
- at91_register_uart(AT91SAM9260_ID_US1, 2,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
- /*
- * USART2 on ttyS3 (Rx, Tx, CTS, RTS).
- * Used for External Modem.
- */
- at91_register_uart(AT91SAM9260_ID_US2, 3,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
- /*
- * USART3 on ttyS4 (Rx, Tx, RTS).
- * Used for RS-485.
- */
- at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_RTS);
-
- /*
- * USART4 on ttyS5 (Rx, Tx).
- * Used for TRX433 Radio Module.
- */
- at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
}
/*
@@ -558,6 +526,37 @@ static int __init gsia18s_power_off_init(void)
static void __init gsia18s_board_init(void)
{
+ /*
+ * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI).
+ * Used for Internal Analog Modem.
+ */
+ at91_register_uart(AT91SAM9260_ID_US0, 1,
+ ATMEL_UART_CTS | ATMEL_UART_RTS |
+ ATMEL_UART_DTR | ATMEL_UART_DSR |
+ ATMEL_UART_DCD | ATMEL_UART_RI);
+ /*
+ * USART1 on ttyS2 (Rx, Tx, CTS, RTS).
+ * Used for GPS or WiFi or Data stream.
+ */
+ at91_register_uart(AT91SAM9260_ID_US1, 2,
+ ATMEL_UART_CTS | ATMEL_UART_RTS);
+ /*
+ * USART2 on ttyS3 (Rx, Tx, CTS, RTS).
+ * Used for External Modem.
+ */
+ at91_register_uart(AT91SAM9260_ID_US2, 3,
+ ATMEL_UART_CTS | ATMEL_UART_RTS);
+ /*
+ * USART3 on ttyS4 (Rx, Tx, RTS).
+ * Used for RS-485.
+ */
+ at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_RTS);
+
+ /*
+ * USART4 on ttyS5 (Rx, Tx).
+ * Used for TRX433 Radio Module.
+ */
+ at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
stamp9g20_board_init();
at91_add_device_usbh(&usbh_data);
at91_add_device_udc(&udc_data);
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index efde1b2327c..f260657f32b 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -47,18 +47,6 @@ static void __init kafa_init_early(void)
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Set up the LEDs */
- at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata kafa_eth_data = {
@@ -79,7 +67,15 @@ static struct at91_udc_data __initdata kafa_udc_data = {
static void __init kafa_board_init(void)
{
+ /* Set up the LEDs */
+ at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&kafa_eth_data);
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 59b92aab9bc..ba39db5482b 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -50,24 +50,6 @@ static void __init kb9202_init_early(void)
/* Initialize processor: 10 MHz crystal */
at91_initialize(10000000);
-
- /* Set up the LEDs */
- at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1 (Rx & Tx only) */
- at91_register_uart(AT91RM9200_ID_US0, 1, 0);
-
- /* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
- at91_register_uart(AT91RM9200_ID_US1, 2, 0);
-
- /* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
- at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata kb9202_eth_data = {
@@ -115,7 +97,21 @@ static struct atmel_nand_data __initdata kb9202_nand_data = {
static void __init kb9202_board_init(void)
{
+ /* Set up the LEDs */
+ at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1 (Rx & Tx only) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, 0);
+
+ /* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
+ at91_register_uart(AT91RM9200_ID_US1, 2, 0);
+
+ /* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
+ at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&kb9202_eth_data);
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 57d5f6a4726..d2f4cc16176 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -55,15 +55,6 @@ static void __init neocore926_init_early(void)
{
/* Initialize processor: 20 MHz crystal */
at91_initialize(20000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -341,6 +332,11 @@ static struct ac97c_platform_data neocore926_ac97_data = {
static void __init neocore926_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB Host */
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index b4a12fc184c..7fe63834242 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -40,17 +40,6 @@
static void __init pcontrol_g20_init_early(void)
{
stamp9g20_init_early();
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
- | ATMEL_UART_RTS);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) isolated RS485 X5 */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS
- | ATMEL_UART_RTS);
-
- /* USART2 on ttyS3. (Rx, Tx) 9bit-Bus Multidrop-mode X4 */
- at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
}
static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
@@ -199,6 +188,16 @@ static struct spi_board_info pcontrol_g20_spi_devices[] = {
static void __init pcontrol_g20_board_init(void)
{
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
+ | ATMEL_UART_RTS);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) isolated RS485 X5 */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS
+ | ATMEL_UART_RTS);
+
+ /* USART2 on ttyS3. (Rx, Tx) 9bit-Bus Multidrop-mode X4 */
+ at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
stamp9g20_board_init();
at91_add_device_usbh(&usbh_data);
at91_add_device_eth(&macb_data);
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 59e35dd1486..b45c0a5d5ca 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -48,17 +48,6 @@ static void __init picotux200_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata picotux200_eth_data = {
@@ -106,6 +95,13 @@ static struct platform_device picotux200_flash = {
static void __init picotux200_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&picotux200_eth_data);
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index b6ed5ed7081..0c61bf0d272 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -52,24 +52,6 @@ static void __init ek_init_early(void)
{
/* Initialize processor: 12.000 MHz crystal */
at91_initialize(12000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS1 (ie, USART0) */
- at91_set_serial_console(1);
-
}
/*
@@ -235,6 +217,19 @@ static struct gpio_led ek_leds[] = {
static void __init ek_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 01332aa538b..afd7a471376 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -50,20 +50,6 @@ static void __init dk_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata dk_eth_data = {
@@ -190,7 +176,17 @@ static struct gpio_led dk_leds[] = {
static void __init dk_board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&dk_eth_data);
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index b2e4fe21f34..2b15b8adec4 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -50,20 +50,6 @@ static void __init ek_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata ek_eth_data = {
@@ -161,7 +147,17 @@ static struct gpio_led ek_leds[] = {
static void __init ek_board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&ek_eth_data);
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index af0750fafa2..24ab9be7510 100644
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -35,26 +35,6 @@ static void __init rsi_ews_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- /* This one is for debugging */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- /* Dialin/-out modem interface */
- at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART3 on ttyS4. (Rx, Tx, RTS) */
- /* RS485 communication */
- at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -204,7 +184,23 @@ static struct platform_device rsiews_nor_flash = {
*/
static void __init rsi_ews_board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ /* This one is for debugging */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ /* Dialin/-out modem interface */
+ at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART3 on ttyS4. (Rx, Tx, RTS) */
+ /* RS485 communication */
+ at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS);
at91_add_device_serial();
at91_set_gpio_output(AT91_PIN_PA21, 0);
/* Ethernet */
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index e8b116b6cba..cdd21f2595d 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -48,23 +48,6 @@ static void __init ek_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -184,7 +167,20 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
static void __init ek_board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index d5aec55b0eb..7b3c3913551 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -54,20 +54,6 @@ static void __init ek_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -320,6 +306,16 @@ static void __init ek_add_device_buttons(void) {}
static void __init ek_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 065fed34242..2736453821b 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -58,15 +58,6 @@ static void __init ek_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -577,7 +568,12 @@ static struct gpio_led ek_leds[] = {
static void __init ek_board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 2ffe50f3a9e..983cb98d246 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -57,15 +57,6 @@ static void __init ek_init_early(void)
{
/* Initialize processor: 16.367 MHz crystal */
at91_initialize(16367660);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -412,6 +403,11 @@ static struct at91_can_data ek_can_data = {
static void __init ek_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 8923ec9f583..3d615532ae5 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -65,20 +65,6 @@ static void __init ek_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -372,6 +358,16 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
static void __init ek_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index c88e908ddd8..9a87f0b072f 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -53,16 +53,6 @@ static void __init ek_init_early(void)
{
/* Initialize processor: 12.000 MHz crystal */
at91_initialize(12000000);
-
- /* DGBU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 not connected on the -EK board */
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -457,6 +447,12 @@ static struct platform_device *devices[] __initdata = {
static void __init ek_board_init(void)
{
/* Serial */
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 not connected on the -EK board */
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB HS Host */
at91_add_device_usbh_ohci(&ek_usbh_hs_data);
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index b109ce2ba86..be3239f13da 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -42,15 +42,6 @@ static void __init ek_init_early(void)
{
/* Initialize processor: 12.000 MHz crystal */
at91_initialize(12000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -296,6 +287,11 @@ static void __init ek_add_device_buttons(void) {}
static void __init ek_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB HS */
at91_add_device_usba(&ek_usba_udc_data);
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index ebc9d01ce74..9d446f1bb45 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -43,16 +43,6 @@
static void __init snapper9260_init_early(void)
{
at91_initialize(18432000);
-
- /* Debug on ttyS0 */
- at91_register_uart(0, 0, 0);
- at91_set_serial_console(0);
-
- at91_register_uart(AT91SAM9260_ID_US0, 1,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_register_uart(AT91SAM9260_ID_US1, 2,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
}
static struct at91_usbh_data __initdata snapper9260_usbh_data = {
@@ -168,6 +158,14 @@ static void __init snapper9260_board_init(void)
snapper9260_i2c_isl1208.irq = gpio_to_irq(AT91_PIN_PA31);
i2c_register_board_info(0, &snapper9260_i2c_isl1208, 1);
+ /* Debug on ttyS0 */
+ at91_register_uart(0, 0, 0);
+
+ at91_register_uart(AT91SAM9260_ID_US0, 1,
+ ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91SAM9260_ID_US1, 2,
+ ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
at91_add_device_serial();
at91_add_device_usbh(&snapper9260_usbh_data);
at91_add_device_udc(&snapper9260_udc_data);
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 7640049410a..ee86f9d7ee7 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -36,44 +36,6 @@ void __init stamp9g20_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DGBU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-static void __init stamp9g20evb_init_early(void)
-{
- stamp9g20_init_early();
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR
- | ATMEL_UART_DCD | ATMEL_UART_RI);
-}
-
-static void __init portuxg20_init_early(void)
-{
- stamp9g20_init_early();
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR
- | ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* USART4 on ttyS5. (Rx, Tx only) */
- at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-
- /* USART5 on ttyS6. (Rx, Tx only) */
- at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
}
/*
@@ -254,6 +216,8 @@ void add_w1(void)
void __init stamp9g20_board_init(void)
{
/* Serial */
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
/* NAND */
add_device_nand();
@@ -269,6 +233,22 @@ void __init stamp9g20_board_init(void)
static void __init portuxg20_board_init(void)
{
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR
+ | ATMEL_UART_DCD | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* USART4 on ttyS5. (Rx, Tx only) */
+ at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+ /* USART5 on ttyS6. (Rx, Tx only) */
+ at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
stamp9g20_board_init();
/* USB Host */
at91_add_device_usbh(&usbh_data);
@@ -286,6 +266,10 @@ static void __init portuxg20_board_init(void)
static void __init stamp9g20evb_board_init(void)
{
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR
+ | ATMEL_UART_DCD | ATMEL_UART_RI);
stamp9g20_board_init();
/* USB Host */
at91_add_device_usbh(&usbh_data);
@@ -303,7 +287,7 @@ MACHINE_START(PORTUXG20, "taskit PortuxG20")
/* Maintainer: taskit GmbH */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
- .init_early = portuxg20_init_early,
+ .init_early = stamp9g20_init_early,
.init_irq = at91_init_irq_default,
.init_machine = portuxg20_board_init,
MACHINE_END
@@ -312,7 +296,7 @@ MACHINE_START(STAMP9G20, "taskit Stamp9G20")
/* Maintainer: taskit GmbH */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
- .init_early = stamp9g20evb_init_early,
+ .init_early = stamp9g20_init_early,
.init_irq = at91_init_irq_default,
.init_machine = stamp9g20evb_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index b7483a3d098..332ecd40bd0 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -53,12 +53,6 @@ static void __init ek_init_early(void)
{
/* Initialize processor: 12.00 MHz crystal */
at91_initialize(12000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -325,6 +319,8 @@ static void __init ek_add_device_leds(void)
static void __init ek_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 38dd279d30b..d56665ea4b5 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -58,26 +58,6 @@ static void __init yl9200_init_early(void)
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
- at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART0 on ttyS2. (Rx & Tx only to JP3) */
- at91_register_uart(AT91RM9200_ID_US0, 2, 0);
-
- /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
- at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
@@ -560,7 +540,23 @@ void __init yl9200_add_device_video(void) {}
static void __init yl9200_board_init(void)
{
+ /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
+ at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART0 on ttyS2. (Rx & Tx only to JP3) */
+ at91_register_uart(AT91RM9200_ID_US0, 2, 0);
+
+ /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
+ at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&yl9200_eth_data);
diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
index ece1f9aefb4..0c6381516a5 100644
--- a/arch/arm/mach-at91/cpuidle.c
+++ b/arch/arm/mach-at91/cpuidle.c
@@ -21,6 +21,7 @@
#include <linux/export.h>
#include <asm/proc-fns.h>
#include <asm/cpuidle.h>
+#include <mach/cpu.h>
#include "pm.h"
@@ -33,7 +34,12 @@ static int at91_enter_idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
- at91_standby();
+ if (cpu_is_at91rm9200())
+ at91rm9200_standby();
+ else if (cpu_is_at91sam9g45())
+ at91sam9g45_standby();
+ else
+ at91sam9_standby();
return index;
}
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index dd9b346c451..0a60bf83703 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -40,17 +40,6 @@ extern struct sys_timer at91sam926x_timer;
extern struct sys_timer at91x40_timer;
/* Clocks */
-/*
- * function to specify the clock of the default console. As we do not
- * use the device/driver bus, the dev_name is not intialize. So we need
- * to link the clock to a specific con_id only "usart"
- */
-extern void __init at91rm9200_set_console_clock(int id);
-extern void __init at91sam9260_set_console_clock(int id);
-extern void __init at91sam9261_set_console_clock(int id);
-extern void __init at91sam9263_set_console_clock(int id);
-extern void __init at91sam9rl_set_console_clock(int id);
-extern void __init at91sam9g45_set_console_clock(int id);
#ifdef CONFIG_AT91_PMC_UNIT
extern int __init at91_clock_init(unsigned long main_clock);
extern int __init at91_dt_clock_init(void);
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
index 603e6aac2a4..e67317c6776 100644
--- a/arch/arm/mach-at91/include/mach/at91rm9200.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
@@ -88,11 +88,6 @@
#define AT91RM9200_BASE_RTC 0xfffffe00 /* Real-Time Clock */
#define AT91RM9200_BASE_MC 0xffffff00 /* Memory Controllers */
-#define AT91_USART0 AT91RM9200_BASE_US0
-#define AT91_USART1 AT91RM9200_BASE_US1
-#define AT91_USART2 AT91RM9200_BASE_US2
-#define AT91_USART3 AT91RM9200_BASE_US3
-
/*
* Internal Memory.
*/
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index 08ae9afd00f..416c7b6c56d 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -95,13 +95,6 @@
#define AT91SAM9260_BASE_WDT 0xfffffd40
#define AT91SAM9260_BASE_GPBR 0xfffffd50
-#define AT91_USART0 AT91SAM9260_BASE_US0
-#define AT91_USART1 AT91SAM9260_BASE_US1
-#define AT91_USART2 AT91SAM9260_BASE_US2
-#define AT91_USART3 AT91SAM9260_BASE_US3
-#define AT91_USART4 AT91SAM9260_BASE_US4
-#define AT91_USART5 AT91SAM9260_BASE_US5
-
/*
* Internal Memory.
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 44fbdc12ee6..a041406d06e 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -79,10 +79,6 @@
#define AT91SAM9261_BASE_WDT 0xfffffd40
#define AT91SAM9261_BASE_GPBR 0xfffffd50
-#define AT91_USART0 AT91SAM9261_BASE_US0
-#define AT91_USART1 AT91SAM9261_BASE_US1
-#define AT91_USART2 AT91SAM9261_BASE_US2
-
/*
* Internal Memory.
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
index d96cbb2e03c..d201029d60b 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9263.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -95,10 +95,6 @@
#define AT91SAM9263_BASE_RTT1 0xfffffd50
#define AT91SAM9263_BASE_GPBR 0xfffffd60
-#define AT91_USART0 AT91SAM9263_BASE_US0
-#define AT91_USART1 AT91SAM9263_BASE_US1
-#define AT91_USART2 AT91SAM9263_BASE_US2
-
#define AT91_SMC AT91_SMC0
/*
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index d052abcff85..3a4da24d591 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -106,11 +106,6 @@
#define AT91SAM9G45_BASE_RTC 0xfffffdb0
#define AT91SAM9G45_BASE_GPBR 0xfffffd60
-#define AT91_USART0 AT91SAM9G45_BASE_US0
-#define AT91_USART1 AT91SAM9G45_BASE_US1
-#define AT91_USART2 AT91SAM9G45_BASE_US2
-#define AT91_USART3 AT91SAM9G45_BASE_US3
-
/*
* Internal Memory.
*/
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index e0073eb1014..a15db56d33f 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -89,11 +89,6 @@
#define AT91SAM9RL_BASE_GPBR 0xfffffd60
#define AT91SAM9RL_BASE_RTC 0xfffffe00
-#define AT91_USART0 AT91SAM9RL_BASE_US0
-#define AT91_USART1 AT91SAM9RL_BASE_US1
-#define AT91_USART2 AT91SAM9RL_BASE_US2
-#define AT91_USART3 AT91SAM9RL_BASE_US3
-
/*
* Internal Memory.
diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h
index 88e43d534cd..c75ee19b58d 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9x5.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h
@@ -55,14 +55,6 @@
#define AT91SAM9X5_BASE_USART2 0xf8024000
/*
- * Base addresses for early serial code (uncompress.h)
- */
-#define AT91_DBGU AT91_BASE_DBGU0
-#define AT91_USART0 AT91SAM9X5_BASE_USART0
-#define AT91_USART1 AT91SAM9X5_BASE_USART1
-#define AT91_USART2 AT91SAM9X5_BASE_USART2
-
-/*
* Internal Memory.
*/
#define AT91SAM9X5_SRAM_BASE 0x00300000 /* Internal SRAM base address */
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 49a821192c6..369afc2ffc5 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -121,7 +121,6 @@ extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_de
#define ATMEL_UART_RI 0x20
extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
-extern void __init at91_set_serial_console(unsigned portnr);
extern struct platform_device *atmel_default_console_device;
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index 0118c333855..73d2fd209ce 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -54,6 +54,7 @@
#define ARCH_REVISON_9200_BGA (0 << 0)
#define ARCH_REVISON_9200_PQFP (1 << 0)
+#ifndef __ASSEMBLY__
enum at91_soc_type {
/* 920T */
AT91_SOC_RM9200,
@@ -106,7 +107,7 @@ static inline int at91_soc_is_detected(void)
return at91_soc_initdata.type != AT91_SOC_NONE;
}
-#ifdef CONFIG_ARCH_AT91RM9200
+#ifdef CONFIG_SOC_AT91RM9200
#define cpu_is_at91rm9200() (at91_soc_initdata.type == AT91_SOC_RM9200)
#define cpu_is_at91rm9200_bga() (at91_soc_initdata.subtype == AT91_SOC_RM9200_BGA)
#define cpu_is_at91rm9200_pqfp() (at91_soc_initdata.subtype == AT91_SOC_RM9200_PQFP)
@@ -116,45 +117,37 @@ static inline int at91_soc_is_detected(void)
#define cpu_is_at91rm9200_pqfp() (0)
#endif
-#ifdef CONFIG_ARCH_AT91SAM9260
+#ifdef CONFIG_SOC_AT91SAM9260
#define cpu_is_at91sam9xe() (at91_soc_initdata.subtype == AT91_SOC_SAM9XE)
#define cpu_is_at91sam9260() (at91_soc_initdata.type == AT91_SOC_SAM9260)
+#define cpu_is_at91sam9g20() (at91_soc_initdata.type == AT91_SOC_SAM9G20)
#else
#define cpu_is_at91sam9xe() (0)
#define cpu_is_at91sam9260() (0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9G20
-#define cpu_is_at91sam9g20() (at91_soc_initdata.type == AT91_SOC_SAM9G20)
-#else
#define cpu_is_at91sam9g20() (0)
#endif
-#ifdef CONFIG_ARCH_AT91SAM9261
+#ifdef CONFIG_SOC_AT91SAM9261
#define cpu_is_at91sam9261() (at91_soc_initdata.type == AT91_SOC_SAM9261)
-#else
-#define cpu_is_at91sam9261() (0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9G10
#define cpu_is_at91sam9g10() (at91_soc_initdata.type == AT91_SOC_SAM9G10)
#else
+#define cpu_is_at91sam9261() (0)
#define cpu_is_at91sam9g10() (0)
#endif
-#ifdef CONFIG_ARCH_AT91SAM9263
+#ifdef CONFIG_SOC_AT91SAM9263
#define cpu_is_at91sam9263() (at91_soc_initdata.type == AT91_SOC_SAM9263)
#else
#define cpu_is_at91sam9263() (0)
#endif
-#ifdef CONFIG_ARCH_AT91SAM9RL
+#ifdef CONFIG_SOC_AT91SAM9RL
#define cpu_is_at91sam9rl() (at91_soc_initdata.type == AT91_SOC_SAM9RL)
#else
#define cpu_is_at91sam9rl() (0)
#endif
-#ifdef CONFIG_ARCH_AT91SAM9G45
+#ifdef CONFIG_SOC_AT91SAM9G45
#define cpu_is_at91sam9g45() (at91_soc_initdata.type == AT91_SOC_SAM9G45)
#define cpu_is_at91sam9g45es() (at91_soc_initdata.subtype == AT91_SOC_SAM9G45ES)
#define cpu_is_at91sam9m10() (at91_soc_initdata.subtype == AT91_SOC_SAM9M10)
@@ -168,7 +161,7 @@ static inline int at91_soc_is_detected(void)
#define cpu_is_at91sam9m11() (0)
#endif
-#ifdef CONFIG_ARCH_AT91SAM9X5
+#ifdef CONFIG_SOC_AT91SAM9X5
#define cpu_is_at91sam9x5() (at91_soc_initdata.type == AT91_SOC_SAM9X5)
#define cpu_is_at91sam9g15() (at91_soc_initdata.subtype == AT91_SOC_SAM9G15)
#define cpu_is_at91sam9g35() (at91_soc_initdata.subtype == AT91_SOC_SAM9G35)
@@ -189,5 +182,6 @@ static inline int at91_soc_is_detected(void)
* definitions may reduce clutter in common drivers.
*/
#define cpu_is_at32ap7000() (0)
+#endif /* __ASSEMBLY__ */
#endif /* __MACH_CPU_H__ */
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index 01db372be8e..ef5786299c6 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -22,27 +22,17 @@
/* 9263, 9g45 */
#define AT91_BASE_DBGU1 0xffffee00
-#if defined(CONFIG_ARCH_AT91RM9200)
+#if defined(CONFIG_ARCH_AT91X40)
+#include <mach/at91x40.h>
+#else
#include <mach/at91rm9200.h>
-#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
#include <mach/at91sam9260.h>
-#elif defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10)
#include <mach/at91sam9261.h>
-#elif defined(CONFIG_ARCH_AT91SAM9263)
#include <mach/at91sam9263.h>
-#elif defined(CONFIG_ARCH_AT91SAM9RL)
#include <mach/at91sam9rl.h>
-#elif defined(CONFIG_ARCH_AT91SAM9G45)
#include <mach/at91sam9g45.h>
-#elif defined(CONFIG_ARCH_AT91SAM9X5)
#include <mach/at91sam9x5.h>
-#elif defined(CONFIG_ARCH_AT91X40)
-#include <mach/at91x40.h>
-#else
-#error "Unsupported AT91 processor"
-#endif
-#if !defined(CONFIG_ARCH_AT91X40)
/*
* On all at91 except rm9200 and x40 have the System Controller starts
* at address 0xffffc000 and has a size of 16KiB.
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
index 4218647c1fc..6f6118d1576 100644
--- a/arch/arm/mach-at91/include/mach/uncompress.h
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -1,7 +1,8 @@
/*
* arch/arm/mach-at91/include/mach/uncompress.h
*
- * Copyright (C) 2003 SAN People
+ * Copyright (C) 2003 SAN People
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -25,22 +26,147 @@
#include <linux/atmel_serial.h>
#include <mach/hardware.h>
-#if defined(CONFIG_AT91_EARLY_DBGU0)
-#define UART_OFFSET AT91_BASE_DBGU0
-#elif defined(CONFIG_AT91_EARLY_DBGU1)
-#define UART_OFFSET AT91_BASE_DBGU1
-#elif defined(CONFIG_AT91_EARLY_USART0)
-#define UART_OFFSET AT91_USART0
-#elif defined(CONFIG_AT91_EARLY_USART1)
-#define UART_OFFSET AT91_USART1
-#elif defined(CONFIG_AT91_EARLY_USART2)
-#define UART_OFFSET AT91_USART2
-#elif defined(CONFIG_AT91_EARLY_USART3)
-#define UART_OFFSET AT91_USART3
-#elif defined(CONFIG_AT91_EARLY_USART4)
-#define UART_OFFSET AT91_USART4
-#elif defined(CONFIG_AT91_EARLY_USART5)
-#define UART_OFFSET AT91_USART5
+#include <mach/at91_dbgu.h>
+#include <mach/cpu.h>
+
+void __iomem *at91_uart;
+
+#if !defined(CONFIG_ARCH_AT91X40)
+static const u32 uarts_rm9200[] = {
+ AT91_BASE_DBGU0,
+ AT91RM9200_BASE_US0,
+ AT91RM9200_BASE_US1,
+ AT91RM9200_BASE_US2,
+ AT91RM9200_BASE_US3,
+ 0,
+};
+
+static const u32 uarts_sam9260[] = {
+ AT91_BASE_DBGU0,
+ AT91SAM9260_BASE_US0,
+ AT91SAM9260_BASE_US1,
+ AT91SAM9260_BASE_US2,
+ AT91SAM9260_BASE_US3,
+ AT91SAM9260_BASE_US4,
+ AT91SAM9260_BASE_US5,
+ 0,
+};
+
+static const u32 uarts_sam9261[] = {
+ AT91_BASE_DBGU0,
+ AT91SAM9261_BASE_US0,
+ AT91SAM9261_BASE_US1,
+ AT91SAM9261_BASE_US2,
+ 0,
+};
+
+static const u32 uarts_sam9263[] = {
+ AT91_BASE_DBGU1,
+ AT91SAM9263_BASE_US0,
+ AT91SAM9263_BASE_US1,
+ AT91SAM9263_BASE_US2,
+ 0,
+};
+
+static const u32 uarts_sam9g45[] = {
+ AT91_BASE_DBGU1,
+ AT91SAM9G45_BASE_US0,
+ AT91SAM9G45_BASE_US1,
+ AT91SAM9G45_BASE_US2,
+ AT91SAM9G45_BASE_US3,
+ 0,
+};
+
+static const u32 uarts_sam9rl[] = {
+ AT91_BASE_DBGU0,
+ AT91SAM9RL_BASE_US0,
+ AT91SAM9RL_BASE_US1,
+ AT91SAM9RL_BASE_US2,
+ AT91SAM9RL_BASE_US3,
+ 0,
+};
+
+static const u32 uarts_sam9x5[] = {
+ AT91_BASE_DBGU0,
+ AT91SAM9X5_BASE_USART0,
+ AT91SAM9X5_BASE_USART1,
+ AT91SAM9X5_BASE_USART2,
+ 0,
+};
+
+static inline const u32* decomp_soc_detect(u32 dbgu_base)
+{
+ u32 cidr, socid;
+
+ cidr = __raw_readl(dbgu_base + AT91_DBGU_CIDR);
+ socid = cidr & ~AT91_CIDR_VERSION;
+
+ switch (socid) {
+ case ARCH_ID_AT91RM9200:
+ return uarts_rm9200;
+
+ case ARCH_ID_AT91SAM9G20:
+ case ARCH_ID_AT91SAM9260:
+ return uarts_sam9260;
+
+ case ARCH_ID_AT91SAM9261:
+ return uarts_sam9261;
+
+ case ARCH_ID_AT91SAM9263:
+ return uarts_sam9263;
+
+ case ARCH_ID_AT91SAM9G45:
+ return uarts_sam9g45;
+
+ case ARCH_ID_AT91SAM9RL64:
+ return uarts_sam9rl;
+
+ case ARCH_ID_AT91SAM9X5:
+ return uarts_sam9x5;
+ }
+
+ /* at91sam9g10 */
+ if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
+ return uarts_sam9261;
+ }
+ /* at91sam9xe */
+ else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) {
+ return uarts_sam9260;
+ }
+
+ return NULL;
+}
+
+static inline void arch_decomp_setup(void)
+{
+ int i = 0;
+ const u32* usarts;
+
+ usarts = decomp_soc_detect(AT91_BASE_DBGU0);
+
+ if (!usarts)
+ usarts = decomp_soc_detect(AT91_BASE_DBGU1);
+ if (!usarts) {
+ at91_uart = NULL;
+ return;
+ }
+
+ do {
+ /* physical address */
+ at91_uart = (void __iomem *)usarts[i];
+
+ if (__raw_readl(at91_uart + ATMEL_US_BRGR))
+ return;
+ i++;
+ } while (usarts[i]);
+
+ at91_uart = NULL;
+}
+#else
+static inline void arch_decomp_setup(void)
+{
+ at91_uart = NULL;
+}
#endif
/*
@@ -52,28 +178,24 @@
*/
static void putc(int c)
{
-#ifdef UART_OFFSET
- void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */
+ if (!at91_uart)
+ return;
- while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY))
+ while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXRDY))
barrier();
- __raw_writel(c, sys + ATMEL_US_THR);
-#endif
+ __raw_writel(c, at91_uart + ATMEL_US_THR);
}
static inline void flush(void)
{
-#ifdef UART_OFFSET
- void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */
+ if (!at91_uart)
+ return;
/* wait for transmission to complete */
- while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
+ while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
barrier();
-#endif
}
-#define arch_decomp_setup()
-
#define arch_decomp_wdog()
#endif
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index f630250c6b8..1bfaad62873 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -261,7 +261,12 @@ static int at91_pm_enter(suspend_state_t state)
* For ARM 926 based chips, this requirement is weaker
* as at91sam9 can access a RAM in self-refresh mode.
*/
- at91_standby();
+ if (cpu_is_at91rm9200())
+ at91rm9200_standby();
+ else if (cpu_is_at91sam9g45())
+ at91sam9g45_standby();
+ else
+ at91sam9_standby();
break;
case PM_SUSPEND_ON:
@@ -307,10 +312,9 @@ static int __init at91_pm_init(void)
pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));
-#ifdef CONFIG_ARCH_AT91RM9200
/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
- at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
-#endif
+ if (cpu_is_at91rm9200())
+ at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
suspend_set_ops(&at91_pm_ops);
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 89f56f3a802..38f467c6b71 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -12,7 +12,6 @@
#define __ARCH_ARM_MACH_AT91_PM
#include <mach/at91_ramc.h>
-#ifdef CONFIG_ARCH_AT91RM9200
#include <mach/at91rm9200_sdramc.h>
/*
@@ -43,10 +42,6 @@ static inline void at91rm9200_standby(void)
"r" (lpr));
}
-#define at91_standby at91rm9200_standby
-
-#elif defined(CONFIG_ARCH_AT91SAM9G45)
-
/* We manage both DDRAM/SDRAM controllers, we need more than one value to
* remember.
*/
@@ -75,11 +70,7 @@ static inline void at91sam9g45_standby(void)
at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
}
-#define at91_standby at91sam9g45_standby
-
-#else
-
-#ifdef CONFIG_ARCH_AT91SAM9263
+#ifdef CONFIG_SOC_AT91SAM9263
/*
* FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
* handle those cases both here and in the Suspend-To-RAM support.
@@ -102,8 +93,4 @@ static inline void at91sam9_standby(void)
at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr);
}
-#define at91_standby at91sam9_standby
-
-#endif
-
#endif
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index db5452123f1..098c28ddf02 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -18,7 +18,7 @@
#include <mach/at91_ramc.h>
-#ifdef CONFIG_ARCH_AT91SAM9263
+#ifdef CONFIG_SOC_AT91SAM9263
/*
* FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
* handle those cases both here and in the Suspend-To-RAM support.
diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
index 5db4aa45404..683dddfd8b1 100644
--- a/arch/arm/mach-at91/soc.h
+++ b/arch/arm/mach-at91/soc.h
@@ -26,30 +26,30 @@ static inline int at91_soc_is_enabled(void)
return at91_boot_soc.init != NULL;
}
-#if !defined(CONFIG_ARCH_AT91RM9200)
+#if !defined(CONFIG_SOC_AT91RM9200)
#define at91rm9200_soc at91_boot_soc
#endif
-#if !(defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20))
+#if !defined(CONFIG_SOC_AT91SAM9260)
#define at91sam9260_soc at91_boot_soc
#endif
-#if !(defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10))
+#if !defined(CONFIG_SOC_AT91SAM9261)
#define at91sam9261_soc at91_boot_soc
#endif
-#if !defined(CONFIG_ARCH_AT91SAM9263)
+#if !defined(CONFIG_SOC_AT91SAM9263)
#define at91sam9263_soc at91_boot_soc
#endif
-#if !defined(CONFIG_ARCH_AT91SAM9G45)
+#if !defined(CONFIG_SOC_AT91SAM9G45)
#define at91sam9g45_soc at91_boot_soc
#endif
-#if !defined(CONFIG_ARCH_AT91SAM9RL)
+#if !defined(CONFIG_SOC_AT91SAM9RL)
#define at91sam9rl_soc at91_boot_soc
#endif
-#if !defined(CONFIG_ARCH_AT91SAM9X5)
+#if !defined(CONFIG_SOC_AT91SAM9X5)
#define at91sam9x5_soc at91_boot_soc
#endif