TILE-Gx big endian support.

/:
	* configure.ac (tilepro-*-*) Change to tilepro*-*-*.
	(tilegx-*-*): Change to tilegx*-*-*.
	* configure: Regenerate.

contrib/:
	* config-list.mk (LIST): Add tilegxbe-linux-gnu.

libcpp/:
	* configure.ac: Change "tilepro" triplet to "tilepro*".
	* configure: Regenerate.

libgcc/:
	* config.host: Support "tilegx*" and "tilepro*" triplets.
	* config/tilegx/sfp-machine32.h (__BYTE_ORDER): Handle big endian.
	* config/tilegx/sfp-machine64.h (__BYTE_ORDER): Handle big endian.

gcc/:
	* config.gcc (tilepro-*-*): Change to tilepro*-*-*.
	(tilegx-*-linux*): Change to tilegx*-*-linux*; Support tilegxbe
	triplet.
	* common/config/tilegx/tilegx-common.c
	(TARGET_DEFAULT_TARGET_FLAGS): Define.
	* config/tilegx/linux.h (ASM_SPEC): Add endian_spec.
	(LINK_SPEC): Ditto.
	* config/tilegx/sync.md (atomic_test_and_set): Handle big endian.
	* config/tilegx/tilegx.c (tilegx_return_in_msb): New.
	(tilegx_gimplify_va_arg_expr): Handle big endian.
	(tilegx_expand_unaligned_load): Ditto.
	(tilegx_expand_unaligned_store): Ditto.
	(TARGET_RETURN_IN_MSB): New.
	* config/tilegx/tilegx.h (TARGET_DEFAULT): New.
	(TARGET_ENDIAN_DEFAULT): New.
	(TARGET_BIG_ENDIAN): Handle big endian.
	(BYTES_BIG_ENDIAN): Ditto.
	(WORDS_BIG_ENDIAN): Ditto.
	(FLOAT_WORDS_BIG_ENDIAN): Ditto.
	(ENDIAN_SPEC): New.
	(EXTRA_SPECS): New.
	* config/tilegx/tilegx.md (extv): Handle big endian.
	(extzv): Ditto.
	(insn_st<n>): Ditto.
	(insn_st<n>_add<bitsuffix>): Ditto.
	(insn_stnt<n>): Ditto.
	(insn_stnt<n>_add<bitsuffix>):Ditto.
	(vec_interleave_highv8qi): Handle big endian.
	(vec_interleave_highv8qi_be): New.
	(vec_interleave_highv8qi_le): New.
	(insn_v1int_h): Handle big endian.
	(vec_interleave_lowv8qi): Handle big endian.
	(vec_interleave_lowv8qi_be): New.
	(vec_interleave_lowv8qi_le): New.
	(insn_v1int_l): Handle big endian.
	(vec_interleave_highv4hi): Handle big endian.
	(vec_interleave_highv4hi_be): New.
	(vec_interleave_highv4hi_le): New.
	(insn_v2int_h): Handle big endian.
	(vec_interleave_lowv4hi): Handle big endian.
	(vec_interleave_lowv4hi_be): New.
	(vec_interleave_lowv4hi_le): New.
	(insn_v2int_l): Handle big endian.
	(vec_interleave_highv2si): Handle big endian.
	(vec_interleave_highv2si_be): New.
	(vec_interleave_highv2si_le): New.
	(insn_v4int_h): Handle big endian.
	(vec_interleave_lowv2si): Handle big endian.
	(vec_interleave_lowv2si_be): New.
	(vec_interleave_lowv2si_le): New.
	(insn_v4int_l): Handle big endian.
	* config/tilegx/tilegx.opt (mbig-endian): New option.
	(mlittle-endian): New option.
	* doc/install.texi: Document tilegxbe-linux.
	* doc/invoke.texi: Document -mbig-endian and -mlittle-endian.



git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@208069 138bc75d-0d04-0410-961f-82ee72b054a4

23 files changed, 502 insertions, 81 deletions

diff --git a/ChangeLog b/ChangeLog
index ecb6e6bd680..9510ce316b4 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,9 @@
+2014-02-24  Walter Lee  <walt@tilera.com>
+
+	* configure.ac (tilepro-*-*) Change to tilepro*-*-*.
+	(tilegx-*-*): Change to tilegx*-*-*.
+	* configure: Regenerate.
+
 2014-02-17  Loren J. Rittle  <ljrittle@acm.org>
 
 	* MAINTAINERS (Various Maintainers: c++ runtime libs): Remove myself.
diff --git a/configure b/configure
index 749a35ea0a7..57be42435a9 100755
--- a/configure
+++ b/configure
@@ -3815,7 +3815,7 @@ case "${target}" in
   tic6x-*-*)
     noconfigdirs="$noconfigdirs sim"
     ;;
-  tilepro-*-* | tilegx-*-*)
+  tilepro*-*-* | tilegx*-*-*)
     noconfigdirs="$noconfigdirs sim"
     ;;
   v810-*-*)
diff --git a/configure.ac b/configure.ac
index b24b33de781..aaeb96667cd 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1145,7 +1145,7 @@ case "${target}" in
   tic6x-*-*)
     noconfigdirs="$noconfigdirs sim"
     ;;
-  tilepro-*-* | tilegx-*-*)
+  tilepro*-*-* | tilegx*-*-*)
     noconfigdirs="$noconfigdirs sim"
     ;;
   v810-*-*)
diff --git a/contrib/ChangeLog b/contrib/ChangeLog
index 43a67baf942..93906ca0ca8 100644
--- a/contrib/ChangeLog
+++ b/contrib/ChangeLog
@@ -1,3 +1,7 @@
+2014-02-24  Walter Lee  <walt@tilera.com>
+
+	* config-list.mk (LIST): Add tilegxbe-linux-gnu.
+
 2014-02-13  Richard Biener  <rguenther@suse.de>
 
 	* download_prerequisites: Update ISL and CLOOG versions.
diff --git a/contrib/config-list.mk b/contrib/config-list.mk
index f2d441b5ad8..43454871da2 100644
--- a/contrib/config-list.mk
+++ b/contrib/config-list.mk
@@ -66,7 +66,8 @@ LIST = aarch64-elf aarch64-linux-gnu \
   sparc-leon3-linux-gnuOPT-enable-target=all sparc-netbsdelf \
   sparc64-sun-solaris2.10OPT-with-gnu-ldOPT-with-gnu-asOPT-enable-threads=posix \
   sparc-wrs-vxworks sparc64-elf sparc64-rtems sparc64-linux sparc64-freebsd6 \
-  sparc64-netbsd sparc64-openbsd spu-elf tilegx-linux-gnu tilepro-linux-gnu \
+  sparc64-netbsd sparc64-openbsd spu-elf \
+  tilegx-linux-gnu tilegxbe-linux-gnu tilepro-linux-gnu \
   v850e-elf v850-elf vax-linux-gnu \
   vax-netbsdelf vax-openbsd x86_64-apple-darwin \
   x86_64-pc-linux-gnuOPT-with-fpmath=avx \
diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index 6ca0b176467..6371f2b9c30 100644
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -1,3 +1,61 @@
+2014-02-24  Walter Lee  <walt@tilera.com>
+
+	* config.gcc (tilepro-*-*): Change to tilepro*-*-*.
+	(tilegx-*-linux*): Change to tilegx*-*-linux*; Support tilegxbe
+	triplet.
+	* common/config/tilegx/tilegx-common.c
+	(TARGET_DEFAULT_TARGET_FLAGS): Define.
+	* config/tilegx/linux.h (ASM_SPEC): Add endian_spec.
+	(LINK_SPEC): Ditto.
+	* config/tilegx/sync.md (atomic_test_and_set): Handle big endian.
+	* config/tilegx/tilegx.c (tilegx_return_in_msb): New.
+	(tilegx_gimplify_va_arg_expr): Handle big endian.
+	(tilegx_expand_unaligned_load): Ditto.
+	(tilegx_expand_unaligned_store): Ditto.
+	(TARGET_RETURN_IN_MSB): New.
+	* config/tilegx/tilegx.h (TARGET_DEFAULT): New.
+	(TARGET_ENDIAN_DEFAULT): New.
+	(TARGET_BIG_ENDIAN): Handle big endian.
+	(BYTES_BIG_ENDIAN): Ditto.
+	(WORDS_BIG_ENDIAN): Ditto.
+	(FLOAT_WORDS_BIG_ENDIAN): Ditto.
+	(ENDIAN_SPEC): New.
+	(EXTRA_SPECS): New.
+	* config/tilegx/tilegx.md (extv): Handle big endian.
+	(extzv): Ditto.
+	(insn_st<n>): Ditto.
+	(insn_st<n>_add<bitsuffix>): Ditto.
+	(insn_stnt<n>): Ditto.
+	(insn_stnt<n>_add<bitsuffix>):Ditto.
+	(vec_interleave_highv8qi): Handle big endian.
+	(vec_interleave_highv8qi_be): New.
+	(vec_interleave_highv8qi_le): New.
+	(insn_v1int_h): Handle big endian.
+	(vec_interleave_lowv8qi): Handle big endian.
+	(vec_interleave_lowv8qi_be): New.
+	(vec_interleave_lowv8qi_le): New.
+	(insn_v1int_l): Handle big endian.
+	(vec_interleave_highv4hi): Handle big endian.
+	(vec_interleave_highv4hi_be): New.
+	(vec_interleave_highv4hi_le): New.
+	(insn_v2int_h): Handle big endian.
+	(vec_interleave_lowv4hi): Handle big endian.
+	(vec_interleave_lowv4hi_be): New.
+	(vec_interleave_lowv4hi_le): New.
+	(insn_v2int_l): Handle big endian.
+	(vec_interleave_highv2si): Handle big endian.
+	(vec_interleave_highv2si_be): New.
+	(vec_interleave_highv2si_le): New.
+	(insn_v4int_h): Handle big endian.
+	(vec_interleave_lowv2si): Handle big endian.
+	(vec_interleave_lowv2si_be): New.
+	(vec_interleave_lowv2si_le): New.
+	(insn_v4int_l): Handle big endian.
+	* config/tilegx/tilegx.opt (mbig-endian): New option.
+	(mlittle-endian): New option.
+	* doc/install.texi: Document tilegxbe-linux.
+	* doc/invoke.texi: Document -mbig-endian and -mlittle-endian.
+
 2014-02-24  Martin Jambor  <mjambor@suse.cz>
 
 	PR ipa/60266
diff --git a/gcc/common/config/tilegx/tilegx-common.c b/gcc/common/config/tilegx/tilegx-common.c
index 6294f7ddcda..ad6fdba2cbf 100644
--- a/gcc/common/config/tilegx/tilegx-common.c
+++ b/gcc/common/config/tilegx/tilegx-common.c
@@ -45,6 +45,11 @@ tilegx_option_init_struct (struct gcc_options *opts)
 }
 
 
+#undef  TARGET_DEFAULT_TARGET_FLAGS
+#define TARGET_DEFAULT_TARGET_FLAGS \
+  (TARGET_DEFAULT		    \
+   | TARGET_ENDIAN_DEFAULT)
+
 #undef  TARGET_OPTION_OPTIMIZATION_TABLE
 #define TARGET_OPTION_OPTIMIZATION_TABLE tilegx_option_optimization_table
 
diff --git a/gcc/config.gcc b/gcc/config.gcc
index 21566407107..2a3deaec926 100644
--- a/gcc/config.gcc
+++ b/gcc/config.gcc
@@ -494,7 +494,7 @@ tilegx*-*-*)
 	cpu_type=tilegx
 	need_64bit_hwint=yes
 	;;
-tilepro-*-*)
+tilepro*-*-*)
 	cpu_type=tilepro
 	need_64bit_hwint=yes
 	;;
@@ -2764,15 +2764,20 @@ tic6x-*-uclinux)
 	tmake_file="${tmake_file} c6x/t-c6x c6x/t-c6x-elf c6x/t-c6x-uclinux"
 	use_collect2=no
 	;;
-tilegx-*-linux*)
+tilegx*-*-linux*)
 	tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h tilegx/linux.h ${tm_file}"
         tmake_file="${tmake_file} tilegx/t-tilegx"
 	extra_objs="${extra_objs} mul-tables.o"
 	c_target_objs="${c_target_objs} tilegx-c.o"
 	cxx_target_objs="${cxx_target_objs} tilegx-c.o"
 	extra_headers="feedback.h"
+	case $target in
+	tilegxbe-*)
+		tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
+ 		;;
+	esac
 	;;
-tilepro-*-linux*)
+tilepro*-*-linux*)
 	tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h tilepro/linux.h ${tm_file}"
         tmake_file="${tmake_file} tilepro/t-tilepro"
 	extra_objs="${extra_objs} mul-tables.o"
diff --git a/gcc/config/tilegx/linux.h b/gcc/config/tilegx/linux.h
index 02bc0501dfd..8cdedcbbe59 100644
--- a/gcc/config/tilegx/linux.h
+++ b/gcc/config/tilegx/linux.h
@@ -22,10 +22,11 @@
 #define CPP_SPEC "%{pthread:-D_REENTRANT}"
 
 #undef ASM_SPEC
-#define ASM_SPEC "%{m32:--32} %{m64:--64}"
+#define ASM_SPEC "%(endian_spec) %{m32:--32} %{m64:--64}"
 
 #undef	LINK_SPEC
-#define LINK_SPEC "%{m64:-m elf64tilegx} %{m32:-m elf32tilegx} \
+#define LINK_SPEC "%(endian_spec) \
+  %{m64:-m elf64tilegx} %{m32:-m elf32tilegx} \
   %{shared:-shared} \
   %{!shared: \
     %{!static: \
diff --git a/gcc/config/tilegx/sync.md b/gcc/config/tilegx/sync.md
index 3d9349301ca..b32b662e676 100644
--- a/gcc/config/tilegx/sync.md
+++ b/gcc/config/tilegx/sync.md
@@ -177,8 +177,7 @@
    (match_operand:SI 2 "const_int_operand" "")]         ;; model
   ""
 {
-  rtx addr, aligned_addr, aligned_mem, offset, word, shmt;
-  rtx tmp0, tmp1;
+  rtx addr, aligned_addr, aligned_mem, offset, word, shmt, tmp;
   rtx result = operands[0];
   rtx mem = operands[1];
   enum memmodel model = (enum memmodel) INTVAL (operands[2]);
@@ -191,27 +190,38 @@
   aligned_mem = change_address (mem, DImode, aligned_addr);
   set_mem_alias_set (aligned_mem, 0);
 
+  tmp = gen_reg_rtx (Pmode);
+  if (BYTES_BIG_ENDIAN)
+    {
+      emit_move_insn (gen_lowpart (DImode, tmp),
+                      gen_rtx_NOT (DImode, gen_lowpart (DImode, addr)));
+    }
+  else
+    {
+      tmp = addr;
+    }
+
   offset = gen_reg_rtx (DImode);
-  emit_move_insn (offset, gen_rtx_AND (DImode, gen_lowpart (DImode, addr),
+  emit_move_insn (offset, gen_rtx_AND (DImode, gen_lowpart (DImode, tmp),
                                        GEN_INT (7)));
 
-  tmp0 = gen_reg_rtx (DImode);
-  emit_move_insn (tmp0, GEN_INT (1));
+  tmp = gen_reg_rtx (DImode);
+  emit_move_insn (tmp, GEN_INT (1));
 
   shmt = gen_reg_rtx (DImode);
   emit_move_insn (shmt, gen_rtx_ASHIFT (DImode, offset, GEN_INT (3)));
 
   word = gen_reg_rtx (DImode);
-  emit_move_insn (word, gen_rtx_ASHIFT (DImode, tmp0,
+  emit_move_insn (word, gen_rtx_ASHIFT (DImode, tmp,
                                         gen_lowpart (SImode, shmt)));
 
-  tmp1 = gen_reg_rtx (DImode);
+  tmp = gen_reg_rtx (DImode);
   tilegx_pre_atomic_barrier (model);
-  emit_insn (gen_atomic_fetch_or_baredi (tmp1, aligned_mem, word));
+  emit_insn (gen_atomic_fetch_or_baredi (tmp, aligned_mem, word));
   tilegx_post_atomic_barrier (model);
 
   emit_move_insn (gen_lowpart (DImode, result),
-                  gen_rtx_LSHIFTRT (DImode, tmp1,
+                  gen_rtx_LSHIFTRT (DImode, tmp,
                                     gen_lowpart (SImode, shmt)));
   DONE;
 })
diff --git a/gcc/config/tilegx/tilegx.c b/gcc/config/tilegx/tilegx.c
index f3c68e3c50f..c3b71261501 100644
--- a/gcc/config/tilegx/tilegx.c
+++ b/gcc/config/tilegx/tilegx.c
@@ -175,6 +175,17 @@ tilegx_pass_by_reference (cumulative_args_t cum ATTRIBUTE_UNUSED,
 }
 
 
+/* Implement TARGET_RETURN_IN_MSB.  We return a value in the most
+   significant part of a register if:
+   - the target is big-endian; and
+   - the value has an aggregate type (e.g., structure or union).  */
+static bool
+tilegx_return_in_msb (const_tree valtype)
+{
+  return (TARGET_BIG_ENDIAN && AGGREGATE_TYPE_P (valtype));
+}
+
+
 /* Implement TARGET_RETURN_IN_MEMORY.  */
 static bool
 tilegx_return_in_memory (const_tree type, const_tree fndecl ATTRIBUTE_UNUSED)
@@ -440,7 +451,10 @@ tilegx_setup_incoming_varargs (cumulative_args_t cum,
     else
       addr = VALIST.__args;
     VALIST.__args = addr + paddedsize;
-    ret = *(TYPE *)addr;
+    if (BYTES_BIG_ENDIAN)
+      ret = *(TYPE *)(addr + paddedsize - sizeof(TYPE));
+    else
+      ret = *(TYPE *)addr;
  */
 static tree
 tilegx_gimplify_va_arg_expr (tree valist, tree type, gimple_seq *pre_p,
@@ -503,10 +517,17 @@ tilegx_gimplify_va_arg_expr (tree valist, tree type, gimple_seq *pre_p,
 			size_int (STACK_POINTER_OFFSET)),
 		unshare_expr (args));
 
+  /* Adjust the address of va_arg if it is in big endian mode.  */
+  if (BYTES_BIG_ENDIAN && rsize > size)
+    tmp = fold_build_pointer_plus_hwi (tmp, rsize - size);
   gimplify_assign (addr, tmp, pre_p);
 
   /* Update VALIST.__args.  */
-  tmp = fold_build_pointer_plus_hwi (addr, rsize);
+  
+  if (BYTES_BIG_ENDIAN && rsize > size)
+    tmp = fold_build_pointer_plus_hwi (addr, size);
+  else
+    tmp = fold_build_pointer_plus_hwi (addr, rsize);
   gimplify_assign (unshare_expr (args), tmp, pre_p);
 
   addr = fold_convert (build_pointer_type (type), addr);
@@ -1847,39 +1868,51 @@ tilegx_expand_unaligned_load (rtx dest_reg, rtx mem, HOST_WIDE_INT bitsize,
 
   mode = GET_MODE (dest_reg);
 
-  hi = gen_reg_rtx (mode);
-
   if (bitsize == 2 * BITS_PER_UNIT && (bit_offset % BITS_PER_UNIT) == 0)
     {
+      rtx mem_left, mem_right;
+      rtx left = gen_reg_rtx (mode);
+
       /* When just loading a two byte value, we can load the two bytes
 	 individually and combine them efficiently.  */
 
       mem_lo = adjust_address (mem, QImode, byte_offset);
       mem_hi = adjust_address (mem, QImode, byte_offset + 1);
 
+      if (BYTES_BIG_ENDIAN)
+	{
+	  mem_left = mem_lo;
+	  mem_right = mem_hi;
+	}
+      else
+	{
+	  mem_left = mem_hi;
+	  mem_right = mem_lo;
+	}
+
       if (sign)
 	{
 	  /* Do a signed load of the second byte and use bfins to set
 	     the high bits of the result.  */
 	  emit_insn (gen_zero_extendqidi2 (gen_lowpart (DImode, dest_reg),
-					   mem_lo));
-	  emit_insn (gen_extendqidi2 (gen_lowpart (DImode, hi), mem_hi));
+					   mem_right));
+	  emit_insn (gen_extendqidi2 (gen_lowpart (DImode, left), mem_left));
 	  emit_insn (gen_insv (gen_lowpart (DImode, dest_reg),
 			       GEN_INT (64 - 8), GEN_INT (8),
-			       gen_lowpart (DImode, hi)));
+			       gen_lowpart (DImode, left)));
 	}
       else
 	{
 	  /* Do two unsigned loads and use v1int_l to interleave
 	     them.  */
-	  rtx lo = gen_reg_rtx (mode);
-	  emit_insn (gen_zero_extendqidi2 (gen_lowpart (DImode, lo),
-					   mem_lo));
-	  emit_insn (gen_zero_extendqidi2 (gen_lowpart (DImode, hi),
-					   mem_hi));
+	  rtx right = gen_reg_rtx (mode);
+	  emit_insn (gen_zero_extendqidi2 (gen_lowpart (DImode, right),
+					   mem_right));
+	  emit_insn (gen_zero_extendqidi2 (gen_lowpart (DImode, left),
+					   mem_left));
 	  emit_insn (gen_insn_v1int_l (gen_lowpart (DImode, dest_reg),
-				       gen_lowpart (DImode, hi),
-				       gen_lowpart (DImode, lo)));
+				       gen_lowpart (DImode, left),
+				       gen_lowpart (DImode, right)));
 	}
 
       return;
@@ -1917,6 +1950,7 @@ tilegx_expand_unaligned_load (rtx dest_reg, rtx mem, HOST_WIDE_INT bitsize,
     }
 
   /* Load hi first in case dest_reg is used in mema.  */
+  hi = gen_reg_rtx (mode);
   emit_move_insn (hi, mem_hi);
   emit_move_insn (wide_result, mem_lo);
 
@@ -1945,12 +1979,17 @@ tilegx_expand_unaligned_store (rtx mem, rtx src, HOST_WIDE_INT bitsize,
 {
   HOST_WIDE_INT byte_offset = bit_offset / BITS_PER_UNIT;
   HOST_WIDE_INT bytesize = bitsize / BITS_PER_UNIT;
-  HOST_WIDE_INT shift_amt;
+  HOST_WIDE_INT shift_init, shift_increment, shift_amt;
   HOST_WIDE_INT i;
   rtx mem_addr;
   rtx store_val;
 
-  for (i = 0, shift_amt = 0; i < bytesize; i++, shift_amt += BITS_PER_UNIT)
+  shift_init = BYTES_BIG_ENDIAN ? (bitsize - BITS_PER_UNIT) : 0;
+  shift_increment = BYTES_BIG_ENDIAN ? -BITS_PER_UNIT : BITS_PER_UNIT;
+
+  for (i = 0, shift_amt = shift_init;
+       i < bytesize;
+       i++, shift_amt += shift_increment)
     {
       mem_addr = adjust_address (mem, QImode, byte_offset + i);
 
@@ -5530,6 +5569,9 @@ tilegx_file_end (void)
 #undef  TARGET_PASS_BY_REFERENCE
 #define TARGET_PASS_BY_REFERENCE tilegx_pass_by_reference
 
+#undef  TARGET_RETURN_IN_MSB
+#define TARGET_RETURN_IN_MSB tilegx_return_in_msb
+
 #undef  TARGET_RETURN_IN_MEMORY
 #define TARGET_RETURN_IN_MEMORY tilegx_return_in_memory
 
diff --git a/gcc/config/tilegx/tilegx.h b/gcc/config/tilegx/tilegx.h
index 9eab51e68e2..f241fe4f244 100644
--- a/gcc/config/tilegx/tilegx.h
+++ b/gcc/config/tilegx/tilegx.h
@@ -18,6 +18,23 @@
    along with GCC; see the file COPYING3.  If not see
    <http://www.gnu.org/licenses/>.  */
 
+/* Default target_flags if no switches are specified  */
+#ifndef TARGET_DEFAULT
+#define TARGET_DEFAULT 0
+#endif
+
+#ifndef TARGET_BIG_ENDIAN_DEFAULT
+#define TARGET_BIG_ENDIAN_DEFAULT 0
+#endif
+
+#ifndef TARGET_ENDIAN_DEFAULT
+#if TARGET_BIG_ENDIAN_DEFAULT
+#define TARGET_ENDIAN_DEFAULT MASK_BIG_ENDIAN
+#else
+#define TARGET_ENDIAN_DEFAULT 0
+#endif
+#endif
+
 /* This is used by tilegx_cpu_cpp_builtins to indicate the byte order
    we're compiling for.  */
 #define TILEGX_CPU_CPP_ENDIAN_BUILTINS()	\
@@ -52,10 +69,10 @@
 
 /* Target machine storage layout */
 
-#define TARGET_BIG_ENDIAN 0
 #define BITS_BIG_ENDIAN 0
-#define BYTES_BIG_ENDIAN TARGET_BIG_ENDIAN
-#define WORDS_BIG_ENDIAN TARGET_BIG_ENDIAN
+#define BYTES_BIG_ENDIAN (TARGET_BIG_ENDIAN != 0)
+#define WORDS_BIG_ENDIAN (TARGET_BIG_ENDIAN != 0)
+#define FLOAT_WORDS_BIG_ENDIAN (TARGET_BIG_ENDIAN != 0)
 
 #define UNITS_PER_WORD 8
 #define PARM_BOUNDARY BITS_PER_WORD
@@ -520,3 +537,20 @@ typedef struct GTY(()) machine_function
 #ifndef HAVE_AS_TLS
 #define HAVE_AS_TLS 0
 #endif
+
+#ifndef ENDIAN_SPEC
+#if TARGET_BIG_ENDIAN_DEFAULT
+#define ENDIAN_SPEC \
+  "%{!mlittle-endian:-EB} \
+   %{mlittle-endian:%{mbig-endian: \
+     %e-mbig-endian and -mlittle-endian may not be used together}-EL}"
+#else
+#define ENDIAN_SPEC \
+  "%{!mbig-endian:-EL} \
+   %{mbig-endian:%{mlittle-endian: \
+    %e-mbig-endian and -mlittle-endian may not be used together}-EB}"
+#endif
+#endif
+
+#define EXTRA_SPECS		\
+  { "endian_spec", ENDIAN_SPEC }
diff --git a/gcc/config/tilegx/tilegx.md b/gcc/config/tilegx/tilegx.md
index c8c7af682a8..94946bb9b56 100644
--- a/gcc/config/tilegx/tilegx.md
+++ b/gcc/config/tilegx/tilegx.md
@@ -824,6 +824,12 @@
       bit_width = INTVAL (operands[2]);
       bit_offset = INTVAL (operands[3]);
 
+      /* NOTE: bit_offset is relative to the mode of operand
+         1 (QImode).  It will be negative in big-endian mode
+         here.  Convert that back to the real offset.  */
+      if (BYTES_BIG_ENDIAN)
+        bit_offset = GET_MODE_BITSIZE (QImode) - bit_width - bit_offset;
+
       /* Reject bitfields that can be done with a normal load.  */
       if (MEM_ALIGN (operands[1]) >= bit_offset + bit_width)
         FAIL;
@@ -860,6 +866,12 @@
       if (GET_MODE (operands[1]) != QImode)
         FAIL;
 
+      /* NOTE: bit_offset is relative to the mode of operand
+         1 (QImode).  It will be negative in big-endian mode
+         here. */
+      if (BYTES_BIG_ENDIAN)
+        bit_offset = GET_MODE_BITSIZE (QImode) - bit_width - bit_offset;
+ 
       /* Reject bitfields that can be done with a normal load.  */
       if (MEM_ALIGN (operands[1]) >= bit_offset + bit_width)
         FAIL;
@@ -3983,7 +3995,9 @@
         (match_operand:DI 1 "reg_or_0_operand" ""))]
   ""
 {
-  operands[1] = simplify_gen_subreg (<MODE>mode, operands[1], DImode, 0);
+  operands[1] = simplify_gen_subreg (<MODE>mode, operands[1], DImode,
+                                     BYTES_BIG_ENDIAN
+				     ? UNITS_PER_WORD - <n>  : 0);
 })
 
 (define_expand "insn_st<I124MODE:n>_add<I48MODE:bitsuffix>"
@@ -3996,7 +4010,9 @@
   ""
 {
   operands[1] = simplify_gen_subreg (<I124MODE:MODE>mode, operands[1],
-				     DImode, 0);
+				     DImode,
+				     BYTES_BIG_ENDIAN
+				     ? UNITS_PER_WORD - <I124MODE:n> : 0);
 })
 
 (define_insn "*insn_st<I124MODE:n>_add<I48MODE:bitsuffix>"
@@ -4035,7 +4051,9 @@
         (match_operand:DI 1 "reg_or_0_operand" ""))]
   ""
 {
-  operands[1] = simplify_gen_subreg (<MODE>mode, operands[1], DImode, 0);
+  operands[1] = simplify_gen_subreg (<MODE>mode, operands[1], DImode,
+                                     BYTES_BIG_ENDIAN
+				     ? UNITS_PER_WORD - <n> : 0);
 })
 
 (define_insn "*insn_stnt<n>"
@@ -4056,7 +4074,9 @@
   ""
 {
   operands[1] = simplify_gen_subreg (<I124MODE:MODE>mode, operands[1],
-				     DImode, 0);
+				     DImode,
+				     BYTES_BIG_ENDIAN
+				     ? UNITS_PER_WORD - <n> : 0);
 })
 
 (define_insn "*insn_stnt<I124MODE:n>_add<I48MODE:bitsuffix>"
@@ -4412,11 +4432,46 @@
   DONE;
 })
 
+;; Byte ordering of these vectors is endian dependent.  gcc concats
+;; right-to-left for little endian, and left-to-right for big endian.
+;; So we need different patterns that depend on endianness.  Our
+;; instructions concat and interleave the way a big-endian target would
+;; work in gcc, so for little endian, we need to reverse the source
+;; operands.
+
 ;; insn_v1int_h
 ;;    {B7,B6,B5,B4,B3,B2,B1,B0} {A7,A6,A5,A4,A3,A2,A1,A0}
 ;; => {A7,A6,A5,A4,A3,A2,A1,A0,B7,B6,B5,B4,B3,B2,B1,B0}
 ;; => {A7,B7,A6,B6,A5,B5,A4,B4}
-(define_insn "vec_interleave_highv8qi"
+(define_expand "vec_interleave_highv8qi"
+  [(match_operand:V8QI 0 "register_operand" "")
+   (match_operand:V8QI 1 "reg_or_0_operand" "")
+   (match_operand:V8QI 2 "reg_or_0_operand" "")]
+  ""
+{
+  if (BYTES_BIG_ENDIAN)
+    emit_insn (gen_vec_interleave_highv8qi_be (operands[0], operands[1],
+					       operands[2]));
+  else
+    emit_insn (gen_vec_interleave_highv8qi_le (operands[0], operands[1],
+					       operands[2]));
+  DONE;
+})
+
+(define_insn "vec_interleave_highv8qi_be"
+  [(set (match_operand:V8QI 0 "register_operand" "=r")
+	(vec_select:V8QI
+	 (vec_concat:V16QI (match_operand:V8QI 1 "reg_or_0_operand" "rO")
+			   (match_operand:V8QI 2 "reg_or_0_operand" "rO"))
+	 (parallel [(const_int 0) (const_int 8)
+		    (const_int 1) (const_int 9)
+		    (const_int 2) (const_int 10)
+		    (const_int 3) (const_int 11)])))]
+  "BYTES_BIG_ENDIAN"
+  "v1int_h\t%0, %r1, %r2"
+  [(set_attr "type" "X01")])
+
+(define_insn "vec_interleave_highv8qi_le"
   [(set (match_operand:V8QI 0 "register_operand" "=r")
 	(vec_select:V8QI
 	 (vec_concat:V16QI (match_operand:V8QI 1 "reg_or_0_operand" "rO")
@@ -4425,7 +4480,7 @@
 		    (const_int 5) (const_int 13) 
 		    (const_int 6) (const_int 14) 
 		    (const_int 7) (const_int 15)])))]
-  ""
+  "!BYTES_BIG_ENDIAN"
   "v1int_h\t%0, %r2, %r1"
   [(set_attr "type" "X01")])
 
@@ -4435,11 +4490,14 @@
    (match_operand:DI 2 "reg_or_0_operand" "")]
   ""
 {
-  /* Our instruction interleaves opposite of the way vec_interleave
-     works, so we need to reverse the source operands.  */
+  /* For little endian, our instruction interleaves opposite of the
+     way vec_interleave works, so we need to reverse the source
+     operands.  */
+  rtx opnd1 = BYTES_BIG_ENDIAN ? operands[1] : operands[2];
+  rtx opnd2 = BYTES_BIG_ENDIAN ? operands[2] : operands[1];
   tilegx_expand_builtin_vector_binop (gen_vec_interleave_highv8qi, V8QImode,
-				      operands[0], V8QImode, operands[2],
-				      operands[1], true);
+				      operands[0], V8QImode, opnd1, opnd2,
+				      true);
   DONE;
 })
 
@@ -4447,7 +4505,35 @@
 ;;    {B7,B6,B5,B4,B3,B2,B1,B0} {A7,A6,A5,A4,A3,A2,A1,A0}
 ;; => {A7,A6,A5,A4,A3,A2,A1,A0,B7,B6,B5,B4,B3,B2,B1,B0}
 ;; => {A3,B3,A2,B2,A1,B1,A0,B0}
-(define_insn "vec_interleave_lowv8qi"
+(define_expand "vec_interleave_lowv8qi"
+  [(match_operand:V8QI 0 "register_operand" "")
+   (match_operand:V8QI 1 "reg_or_0_operand" "")
+   (match_operand:V8QI 2 "reg_or_0_operand" "")]
+  ""
+{
+  if (BYTES_BIG_ENDIAN)
+    emit_insn (gen_vec_interleave_lowv8qi_be (operands[0], operands[1],
+					      operands[2]));
+  else
+    emit_insn (gen_vec_interleave_lowv8qi_le (operands[0], operands[1],
+					      operands[2]));
+  DONE;
+})
+
+(define_insn "vec_interleave_lowv8qi_be"
+  [(set (match_operand:V8QI 0 "register_operand" "=r")
+	(vec_select:V8QI
+	 (vec_concat:V16QI (match_operand:V8QI 1 "reg_or_0_operand" "rO")
+			   (match_operand:V8QI 2 "reg_or_0_operand" "rO"))
+	 (parallel [(const_int 4) (const_int 12)
+		    (const_int 5) (const_int 13)
+		    (const_int 6) (const_int 14)
+		    (const_int 7) (const_int 15)])))]
+  "BYTES_BIG_ENDIAN"
+  "v1int_l\t%0, %r1, %r2"
+  [(set_attr "type" "X01")])
+
+(define_insn "vec_interleave_lowv8qi_le"
   [(set (match_operand:V8QI 0 "register_operand" "=r")
 	(vec_select:V8QI
 	 (vec_concat:V16QI (match_operand:V8QI 1 "reg_or_0_operand" "rO")
@@ -4456,7 +4542,7 @@
 		    (const_int 1) (const_int 9)
 		    (const_int 2) (const_int 10)
 		    (const_int 3) (const_int 11)])))]
-  ""
+  "!BYTES_BIG_ENDIAN"
   "v1int_l\t%0, %r2, %r1"
   [(set_attr "type" "X01")])
 
@@ -4466,11 +4552,14 @@
    (match_operand:DI 2 "reg_or_0_operand" "")]
   ""
 {
-  /* Our instruction interleaves opposite of the way vec_interleave
-     works, so we need to reverse the source operands.  */
+  /* For little endian, our instruction interleaves opposite of the
+     way vec_interleave works, so we need to reverse the source
+     operands.  */
+  rtx opnd1 = BYTES_BIG_ENDIAN ? operands[1] : operands[2];
+  rtx opnd2 = BYTES_BIG_ENDIAN ? operands[2] : operands[1];
   tilegx_expand_builtin_vector_binop (gen_vec_interleave_lowv8qi, V8QImode,
-				      operands[0], V8QImode, operands[2],
-				      operands[1], true);
+				      operands[0], V8QImode, opnd1, opnd2,
+				      true);
   DONE;
 })
 
@@ -4478,14 +4567,40 @@
 ;;    {B3,B2,B1,B0} {A3,A2,A1,A0}
 ;; => {A3,A2,A1,A0,B3,B2,B1,B0}
 ;; => {A3,B3,A2,B2}
-(define_insn "vec_interleave_highv4hi"
+(define_expand "vec_interleave_highv4hi"
+  [(match_operand:V4HI 0 "register_operand" "")
+   (match_operand:V4HI 1 "reg_or_0_operand" "")
+   (match_operand:V4HI 2 "reg_or_0_operand" "")]
+  ""
+{
+  if (BYTES_BIG_ENDIAN)
+    emit_insn (gen_vec_interleave_highv4hi_be (operands[0], operands[1],
+					       operands[2]));
+  else
+    emit_insn (gen_vec_interleave_highv4hi_le (operands[0], operands[1],
+					       operands[2]));
+  DONE;
+})
+
+(define_insn "vec_interleave_highv4hi_be"
+  [(set (match_operand:V4HI 0 "register_operand" "=r")
+	(vec_select:V4HI
+	 (vec_concat:V8HI (match_operand:V4HI 1 "reg_or_0_operand" "rO")
+			  (match_operand:V4HI 2 "reg_or_0_operand" "rO"))
+	 (parallel [(const_int 0) (const_int 4)
+		    (const_int 1) (const_int 5)])))]
+  "BYTES_BIG_ENDIAN"
+  "v2int_h\t%0, %r1, %r2"
+  [(set_attr "type" "X01")])
+
+(define_insn "vec_interleave_highv4hi_le"
   [(set (match_operand:V4HI 0 "register_operand" "=r")
 	(vec_select:V4HI
 	 (vec_concat:V8HI (match_operand:V4HI 1 "reg_or_0_operand" "rO")
 			  (match_operand:V4HI 2 "reg_or_0_operand" "rO"))
 	 (parallel [(const_int 2) (const_int 6)
 		    (const_int 3) (const_int 7)])))]
-  ""
+  "!BYTES_BIG_ENDIAN"
   "v2int_h\t%0, %r2, %r1"
   [(set_attr "type" "X01")])
 
@@ -4495,11 +4610,14 @@
    (match_operand:DI 2 "reg_or_0_operand" "")]
   ""
 {
-  /* Our instruction interleaves opposite of the way vec_interleave
-     works, so we need to reverse the source operands.  */
+  /* For little endian, our instruction interleaves opposite of the
+     way vec_interleave works, so we need to reverse the source
+     operands.  */
+  rtx opnd1 = BYTES_BIG_ENDIAN ? operands[1] : operands[2];
+  rtx opnd2 = BYTES_BIG_ENDIAN ? operands[2] : operands[1];
   tilegx_expand_builtin_vector_binop (gen_vec_interleave_highv4hi, V4HImode,
-                                      operands[0], V4HImode, operands[2],
-				      operands[1], true);
+                                      operands[0], V4HImode, opnd1, opnd2,
+				      true);
   DONE;
 })
 
@@ -4507,14 +4625,40 @@
 ;;    {B3,B2,B1,B0} {A3,A2,A1,A0}
 ;; => {A3,A2,A1,A0,B3,B2,B1,B0}
 ;; => {A1,B1,A0,B0}
-(define_insn "vec_interleave_lowv4hi"
+(define_expand "vec_interleave_lowv4hi"
+  [(match_operand:V4HI 0 "register_operand" "")
+   (match_operand:V4HI 1 "reg_or_0_operand" "")
+   (match_operand:V4HI 2 "reg_or_0_operand" "")]
+  ""
+{
+  if (BYTES_BIG_ENDIAN)
+    emit_insn (gen_vec_interleave_lowv4hi_be (operands[0], operands[1],
+					      operands[2]));
+  else
+    emit_insn (gen_vec_interleave_lowv4hi_le (operands[0], operands[1],
+					      operands[2]));
+  DONE;
+})
+
+(define_insn "vec_interleave_lowv4hi_be"
+  [(set (match_operand:V4HI 0 "register_operand" "=r")
+	(vec_select:V4HI
+	 (vec_concat:V8HI (match_operand:V4HI 1 "reg_or_0_operand" "rO")
+			  (match_operand:V4HI 2 "reg_or_0_operand" "rO"))
+	 (parallel [(const_int 2) (const_int 6)
+		    (const_int 3) (const_int 7)])))]
+  "BYTES_BIG_ENDIAN"
+  "v2int_l\t%0, %r1, %r2"
+  [(set_attr "type" "X01")])
+
+(define_insn "vec_interleave_lowv4hi_le"
   [(set (match_operand:V4HI 0 "register_operand" "=r")
 	(vec_select:V4HI
 	 (vec_concat:V8HI (match_operand:V4HI 1 "reg_or_0_operand" "rO")
 			  (match_operand:V4HI 2 "reg_or_0_operand" "rO"))
 	 (parallel [(const_int 0) (const_int 4)
 		    (const_int 1) (const_int 5)])))]
-  ""
+  "!BYTES_BIG_ENDIAN"
   "v2int_l\t%0, %r2, %r1"
   [(set_attr "type" "X01")])
 
@@ -4524,9 +4668,14 @@
    (match_operand:DI 2 "reg_or_0_operand" "")]
   ""
 {
+  /* For little endian, our instruction interleaves opposite of the
+     way vec_interleave works, so we need to reverse the source
+     operands.  */
+  rtx opnd1 = BYTES_BIG_ENDIAN ? operands[1] : operands[2];
+  rtx opnd2 = BYTES_BIG_ENDIAN ? operands[2] : operands[1];
   tilegx_expand_builtin_vector_binop (gen_vec_interleave_lowv4hi, V4HImode,
-                                      operands[0], V4HImode, operands[2],
-				      operands[1], true);
+                                      operands[0], V4HImode, opnd1, opnd2,
+				      true);
   DONE;
 })
 
@@ -4534,13 +4683,38 @@
 ;;    {B1,B0} {A1,A0}
 ;; => {A1,A0,B1,B0}
 ;; => {A1,B1}
-(define_insn "vec_interleave_highv2si"
+(define_expand "vec_interleave_highv2si"
+  [(match_operand:V2SI 0 "register_operand" "")
+   (match_operand:V2SI 1 "reg_or_0_operand" "")
+   (match_operand:V2SI 2 "reg_or_0_operand" "")]
+  ""
+{
+  if (BYTES_BIG_ENDIAN)
+    emit_insn (gen_vec_interleave_highv2si_be (operands[0], operands[1],
+					       operands[2]));
+  else
+    emit_insn (gen_vec_interleave_highv2si_le (operands[0], operands[1],
+					       operands[2]));
+  DONE;
+})
+
+(define_insn "vec_interleave_highv2si_be"
+  [(set (match_operand:V2SI 0 "register_operand" "=r")
+	(vec_select:V2SI
+	 (vec_concat:V4SI (match_operand:V2SI 1 "reg_or_0_operand" "rO")
+			  (match_operand:V2SI 2 "reg_or_0_operand" "rO"))
+	 (parallel [(const_int 0) (const_int 2)])))]
+  "BYTES_BIG_ENDIAN"
+  "v4int_h\t%0, %r1, %r2"
+  [(set_attr "type" "X01")])
+
+(define_insn "vec_interleave_highv2si_le"
   [(set (match_operand:V2SI 0 "register_operand" "=r")
 	(vec_select:V2SI
 	 (vec_concat:V4SI (match_operand:V2SI 1 "reg_or_0_operand" "rO")
 			  (match_operand:V2SI 2 "reg_or_0_operand" "rO"))
 	 (parallel [(const_int 1) (const_int 3)])))]
-  ""
+  "!BYTES_BIG_ENDIAN"
   "v4int_h\t%0, %r2, %r1"
   [(set_attr "type" "X01")])
 
@@ -4550,11 +4724,14 @@
    (match_operand:DI 2 "reg_or_0_operand" "")]
   ""
 {
-  /* Our instruction interleaves opposite of the way vec_interleave
-     works, so we need to reverse the source operands.  */
+  /* For little endian, our instruction interleaves opposite of the
+     way vec_interleave works, so we need to reverse the source
+     operands.  */
+  rtx opnd1 = BYTES_BIG_ENDIAN ? operands[1] : operands[2];
+  rtx opnd2 = BYTES_BIG_ENDIAN ? operands[2] : operands[1];
   tilegx_expand_builtin_vector_binop (gen_vec_interleave_highv2si, V2SImode,
-                                      operands[0], V2SImode, operands[2],
-				      operands[1], true);
+                                      operands[0], V2SImode, opnd1, opnd2,
+				      true);
   DONE;
 })
 
@@ -4562,13 +4739,38 @@
 ;;    {B1,B0} {A1,A0}
 ;; => {A1,A0,B1,B0}
 ;; => {A0,B0}
-(define_insn "vec_interleave_lowv2si"
+(define_expand "vec_interleave_lowv2si"
+  [(match_operand:V2SI 0 "register_operand" "")
+   (match_operand:V2SI 1 "reg_or_0_operand" "")
+   (match_operand:V2SI 2 "reg_or_0_operand" "")]
+  ""
+{
+  if (BYTES_BIG_ENDIAN)
+    emit_insn (gen_vec_interleave_lowv2si_be (operands[0], operands[1],
+					      operands[2]));
+  else
+    emit_insn (gen_vec_interleave_lowv2si_le (operands[0], operands[1],
+					      operands[2]));
+  DONE;
+})
+
+(define_insn "vec_interleave_lowv2si_be"
+  [(set (match_operand:V2SI 0 "register_operand" "=r")
+	(vec_select:V2SI
+	 (vec_concat:V4SI (match_operand:V2SI 1 "reg_or_0_operand" "rO")
+			  (match_operand:V2SI 2 "reg_or_0_operand" "rO"))
+	 (parallel [(const_int 1) (const_int 3)])))]
+  "BYTES_BIG_ENDIAN"
+  "v4int_l\t%0, %r1, %r2"
+  [(set_attr "type" "X01")])
+
+(define_insn "vec_interleave_lowv2si_le"
   [(set (match_operand:V2SI 0 "register_operand" "=r")
 	(vec_select:V2SI
 	 (vec_concat:V4SI (match_operand:V2SI 1 "reg_or_0_operand" "rO")
 			  (match_operand:V2SI 2 "reg_or_0_operand" "rO"))
 	 (parallel [(const_int 0) (const_int 2)])))]
-  ""
+  "!BYTES_BIG_ENDIAN"
   "v4int_l\t%0, %r2, %r1"
   [(set_attr "type" "X01")])
 
@@ -4578,11 +4780,14 @@
    (match_operand:DI 2 "reg_or_0_operand" "")]
   ""
 {
-  /* Our instruction interleaves opposite of the way vec_interleave
-     works, so we need to reverse the source operands.  */
+  /* For little endian, our instruction interleaves opposite of the
+     way vec_interleave works, so we need to reverse the source
+     operands.  */
+  rtx opnd1 = BYTES_BIG_ENDIAN ? operands[1] : operands[2];
+  rtx opnd2 = BYTES_BIG_ENDIAN ? operands[2] : operands[1];
   tilegx_expand_builtin_vector_binop (gen_vec_interleave_lowv2si, V2SImode,
-                                      operands[0], V2SImode, operands[2],
-				      operands[1], true);
+                                      operands[0], V2SImode, opnd1, opnd2,
+				      true);
   DONE;
 })
 
diff --git a/gcc/config/tilegx/tilegx.opt b/gcc/config/tilegx/tilegx.opt
index a71f54645e5..37c12fe1f4f 100644
--- a/gcc/config/tilegx/tilegx.opt
+++ b/gcc/config/tilegx/tilegx.opt
@@ -40,6 +40,14 @@ m64
 Target Report RejectNegative Negative(m32) InverseMask(32BIT, 64BIT)
 Compile with 64 bit longs and pointers.
 
+mbig-endian
+Target Report RejectNegative Mask(BIG_ENDIAN)
+Use big-endian byte order.
+
+mlittle-endian
+Target Report RejectNegative InverseMask(BIG_ENDIAN)
+Use little-endian byte order.
+
 mcmodel=
 Target RejectNegative Joined Enum(cmodel) Var(tilegx_cmodel) Init(CM_SMALL)
 Use given TILE-Gx code model
diff --git a/gcc/doc/install.texi b/gcc/doc/install.texi
index 7a619420495..dc040cbc387 100644
--- a/gcc/doc/install.texi
+++ b/gcc/doc/install.texi
@@ -3188,6 +3188,8 @@ information have to.
 @item
 @uref{#tilegx-x-linux,,tilegx-*-linux*}
 @item
+@uref{#tilegxbe-x-linux,,tilegxbe-*-linux*}
+@item
 @uref{#tilepro-x-linux,,tilepro-*-linux*}
 @item
 @uref{#x-x-vxworks,,*-*-vxworks*}
@@ -4480,8 +4482,16 @@ The C6X family of processors. This port requires binutils-2.22 or newer.
 @end html
 @anchor{tilegx-*-linux}
 @heading tilegx-*-linux*
-The TILE-Gx processor running GNU/Linux.  This port requires
-binutils-2.22 or newer.
+The TILE-Gx processor in little endian mode, running GNU/Linux.  This
+port requires binutils-2.22 or newer.
+
+@html
+<hr />
+@end html
+@anchor{tilegxbe-*-linux}
+@heading tilegxbe-*-linux*
+The TILE-Gx processor in big endian mode, running GNU/Linux.  This
+port requires binutils-2.23 or newer.
 
 @html
 <hr />
diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index 959664c16cc..3d4812f98c1 100644
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -1012,7 +1012,8 @@ See RS/6000 and PowerPC Options.
 @gccoptlist{-Qy  -Qn  -YP,@var{paths}  -Ym,@var{dir}}
 
 @emph{TILE-Gx Options}
-@gccoptlist{-mcpu=@var{cpu} -m32 -m64 -mcmodel=@var{code-model}}
+@gccoptlist{-mcpu=CPU -m32 -m64 -mbig-endian -mlittle-endian @gol
+-mcmodel=@var{code-model}}
 
 @emph{TILEPro Options}
 @gccoptlist{-mcpu=@var{cpu} -m32}
@@ -21344,6 +21345,12 @@ type is @samp{tilegx}.
 Generate code for a 32-bit or 64-bit environment.  The 32-bit
 environment sets int, long, and pointer to 32 bits.  The 64-bit
 environment sets int to 32 bits and long and pointer to 64 bits.
+
+@item -mbig-endian
+@itemx -mlittle-endian
+@opindex mbig-endian
+@opindex mlittle-endian
+Generate code in big/little endian mode, respectively.
 @end table
 
 @node TILEPro Options
diff --git a/libcpp/ChangeLog b/libcpp/ChangeLog
index 44736e0b9f1..3a63434157b 100644
--- a/libcpp/ChangeLog
+++ b/libcpp/ChangeLog
@@ -1,3 +1,8 @@
+2014-02-24  Walter Lee  <walt@tilera.com>
+
+	* configure.ac: Change "tilepro" triplet to "tilepro*".
+	* configure: Regenerate.
+
 2014-02-19  Jakub Jelinek  <jakub@redhat.com>
 
 	PR preprocessor/58844
diff --git a/libcpp/configure b/libcpp/configure
index 782a7105ac3..b421e48fd90 100755
--- a/libcpp/configure
+++ b/libcpp/configure
@@ -7168,7 +7168,7 @@ case $target in
 	sparc*-*-* | \
 	spu-*-* | \
 	sh[123456789lbe]*-*-* | sh-*-* | \
-	tilegx-*-* | tilepro-*-* )
+	tilegx*-*-* | tilepro*-*-* )
 		need_64bit_hwint=yes ;;
 	*)
 		need_64bit_hwint=no ;;
diff --git a/libcpp/configure.ac b/libcpp/configure.ac
index a70603c95a6..8515abff2da 100644
--- a/libcpp/configure.ac
+++ b/libcpp/configure.ac
@@ -197,7 +197,7 @@ case $target in
 	sparc*-*-* | \
 	spu-*-* | \
 	sh[123456789lbe]*-*-* | sh-*-* | \
-	tilegx-*-* | tilepro-*-* )
+	tilegx*-*-* | tilepro*-*-* )
 		need_64bit_hwint=yes ;;
 	*)
 		need_64bit_hwint=no ;;
diff --git a/libgcc/ChangeLog b/libgcc/ChangeLog
index 1dae0204892..167e7a90b3c 100644
--- a/libgcc/ChangeLog
+++ b/libgcc/ChangeLog
@@ -1,3 +1,9 @@
+2014-02-24  Walter Lee  <walt@tilera.com>
+
+	* config.host: Support "tilegx*" and "tilepro*" triplets.
+	* config/tilegx/sfp-machine32.h (__BYTE_ORDER): Handle big endian.
+	* config/tilegx/sfp-machine64.h (__BYTE_ORDER): Handle big endian.
+
 2014-02-20  Sandra Loosemore  <sandra@codesourcery.com>
 	    Chung-Lin Tang  <cltang@codesourcery.com>
 
diff --git a/libgcc/config.host b/libgcc/config.host
index 0b83fc05464..185d40bf676 100644
--- a/libgcc/config.host
+++ b/libgcc/config.host
@@ -186,6 +186,12 @@ s390*-*-*)
 sh[123456789lbe]*-*-*)
 	cpu_type=sh
 	;;
+tilegx*-*-*)
+	cpu_type=tilegx
+	;;
+tilepro*-*-*)
+	cpu_type=tilepro
+	;;
 v850*-*-*)
 	cpu_type=v850
 	;;
@@ -1177,11 +1183,11 @@ tic6x-*-elf)
 	extra_parts="$extra_parts crtbeginS.o crtendS.o crti.o crtn.o"
 	unwind_header=config/c6x/unwind-c6x.h
 	;;
-tilegx-*-linux*)
+tilegx*-*-linux*)
 	tmake_file="${tmake_file} tilegx/t-crtstuff t-softfp-sfdf tilegx/t-softfp t-softfp tilegx/t-tilegx"
 	md_unwind_header=tilepro/linux-unwind.h
         ;;
-tilepro-*-linux*)
+tilepro*-*-linux*)
 	tmake_file="${tmake_file} tilepro/t-crtstuff t-softfp-sfdf t-softfp tilepro/t-tilepro"
 	md_unwind_header=tilepro/linux-unwind.h
         ;;
diff --git a/libgcc/config/tilegx/sfp-machine32.h b/libgcc/config/tilegx/sfp-machine32.h
index 1fefb5a41ce..9fc281cc8ed 100644
--- a/libgcc/config/tilegx/sfp-machine32.h
+++ b/libgcc/config/tilegx/sfp-machine32.h
@@ -55,7 +55,11 @@ typedef int __gcc_CMPtype __attribute__ ((mode (__libgcc_cmp_return__)));
 #define	__LITTLE_ENDIAN	1234
 #define	__BIG_ENDIAN	4321
 
+#if defined __BIG_ENDIAN__
+#define __BYTE_ORDER __BIG_ENDIAN
+#else
 #define __BYTE_ORDER __LITTLE_ENDIAN
+#endif
 
 /* Define ALIASNAME as a strong alias for NAME.  */
 # define strong_alias(name, aliasname) _strong_alias(name, aliasname)
diff --git a/libgcc/config/tilegx/sfp-machine64.h b/libgcc/config/tilegx/sfp-machine64.h
index 3e2bd41e6a9..5dbbe60c46b 100644
--- a/libgcc/config/tilegx/sfp-machine64.h
+++ b/libgcc/config/tilegx/sfp-machine64.h
@@ -55,7 +55,11 @@ typedef int __gcc_CMPtype __attribute__ ((mode (__libgcc_cmp_return__)));
 #define	__LITTLE_ENDIAN	1234
 #define	__BIG_ENDIAN	4321
 
+#if defined __BIG_ENDIAN__
+#define __BYTE_ORDER __BIG_ENDIAN
+#else
 #define __BYTE_ORDER __LITTLE_ENDIAN
+#endif
 
 /* Define ALIASNAME as a strong alias for NAME.  */
 # define strong_alias(name, aliasname) _strong_alias(name, aliasname)