Merge tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty / serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver changes for 6.0-rc1.

  It was delayed from last week as I wanted to make sure the last commit
  here got some good testing in linux-next and elsewhere as it seemed to
  show up only late in testing for some reason.

  Nothing major here, just lots of cleanups from Jiri and Ilpo to make
  the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo).

  Also included in here is the obligatory n_gsm updates from Daniel
  Starke and lots of tiny driver updates and minor fixes and tweaks for
  other smaller serial drivers.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits)
  tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements
  tty: amiserial: Fix comment typo
  tty: serial: document uart_get_console()
  tty: serial: serial_core, reformat kernel-doc for functions
  Documentation: serial: link uart_ops properly
  Documentation: serial: move GPIO kernel-doc to the functions
  Documentation: serial: dedup kernel-doc for uart functions
  Documentation: serial: move uart_ops documentation to the struct
  dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126
  serial: mvebu-uart: uart2 error bits clearing
  tty: serial: fsl_lpuart: correct the count of break characters
  serial: stm32: make info structs static to avoid sparse warnings
  serial: fsl_lpuart: zero out parity bit in CS7 mode
  tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  serial: 8250_bcm2835aux: Add missing clk_disable_unprepare()
  tty: vt: initialize unicode screen buffer
  serial: remove VR41XX serial driver
  serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags
  serial: 8250_dwlib: remove redundant sanity check for RS485 flags
  dt_bindings: rs485: Correct delay values
  ...

1 files changed, 18 insertions, 7 deletions

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 7292917ac878..314a05e009df 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -112,7 +112,9 @@
 struct exar8250;
 
 struct exar8250_platform {
-	int (*rs485_config)(struct uart_port *, struct serial_rs485 *);
+	int (*rs485_config)(struct uart_port *port, struct ktermios *termios,
+			    struct serial_rs485 *rs485);
+	const struct serial_rs485 *rs485_supported;
 	int (*register_gpio)(struct pci_dev *, struct uart_8250_port *);
 	void (*unregister_gpio)(struct uart_8250_port *);
 };
@@ -194,11 +196,11 @@ static int xr17v35x_startup(struct uart_port *port)
 
 static void exar_shutdown(struct uart_port *port)
 {
-	unsigned char lsr;
 	bool tx_complete = false;
 	struct uart_8250_port *up = up_to_u8250p(port);
 	struct circ_buf *xmit = &port->state->xmit;
 	int i = 0;
+	u16 lsr;
 
 	do {
 		lsr = serial_in(up, UART_LSR);
@@ -408,7 +410,7 @@ static void xr17v35x_unregister_gpio(struct uart_8250_port *port)
 	port->port.private_data = NULL;
 }
 
-static int generic_rs485_config(struct uart_port *port,
+static int generic_rs485_config(struct uart_port *port, struct ktermios *termios,
 				struct serial_rs485 *rs485)
 {
 	bool is_rs485 = !!(rs485->flags & SER_RS485_ENABLED);
@@ -426,18 +428,21 @@ static int generic_rs485_config(struct uart_port *port,
 	if (is_rs485)
 		writeb(UART_EXAR_RS485_DLY(4), p + UART_MSR);
 
-	port->rs485 = *rs485;
-
 	return 0;
 }
 
+static const struct serial_rs485 generic_rs485_supported = {
+	.flags = SER_RS485_ENABLED,
+};
+
 static const struct exar8250_platform exar8250_default_platform = {
 	.register_gpio = xr17v35x_register_gpio,
 	.unregister_gpio = xr17v35x_unregister_gpio,
 	.rs485_config = generic_rs485_config,
+	.rs485_supported = &generic_rs485_supported,
 };
 
-static int iot2040_rs485_config(struct uart_port *port,
+static int iot2040_rs485_config(struct uart_port *port, struct ktermios *termios,
 				struct serial_rs485 *rs485)
 {
 	bool is_rs485 = !!(rs485->flags & SER_RS485_ENABLED);
@@ -467,9 +472,13 @@ static int iot2040_rs485_config(struct uart_port *port,
 	value |= mode;
 	writeb(value, p + UART_EXAR_MPIOLVL_7_0);
 
-	return generic_rs485_config(port, rs485);
+	return generic_rs485_config(port, termios, rs485);
 }
 
+static const struct serial_rs485 iot2040_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RX_DURING_TX | SER_RS485_TERMINATE_BUS,
+};
+
 static const struct property_entry iot2040_gpio_properties[] = {
 	PROPERTY_ENTRY_U32("exar,first-pin", 10),
 	PROPERTY_ENTRY_U32("ngpios", 1),
@@ -498,6 +507,7 @@ static int iot2040_register_gpio(struct pci_dev *pcidev,
 
 static const struct exar8250_platform iot2040_platform = {
 	.rs485_config = iot2040_rs485_config,
+	.rs485_supported = &iot2040_rs485_supported,
 	.register_gpio = iot2040_register_gpio,
 	.unregister_gpio = xr17v35x_unregister_gpio,
 };
@@ -540,6 +550,7 @@ pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev,
 
 	port->port.uartclk = baud * 16;
 	port->port.rs485_config = platform->rs485_config;
+	port->port.rs485_supported = *(platform->rs485_supported);
 
 	/*
 	 * Setup the UART clock for the devices on expansion slot to