Merge tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management updates from Rafael Wysocki:
 "These are ARM cpufreq updates and operating performance points (OPP)
  updates plus one cpuidle update adding a new trace point.

  Specifics:

   - Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).

   - Minor cleanups and support for new boards for Qcom cpufreq drivers
     (Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).

   - Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar).

   - Make dev_pm_opp_set_regulators() accept NULL terminated list
     (Viresh Kumar).

   - Add dev_pm_opp_set_config() and friends and migrate other users and
     helpers to using them (Viresh Kumar).

   - Add support for multiple clocks for a device (Viresh Kumar and
     Krzysztof Kozlowski).

   - Configure resources before adding OPP table for Venus (Stanimir
     Varbanov).

   - Keep reference count up for opp->np and opp_table->np while they
     are still in use (Liang He).

   - Minor OPP cleanups (Viresh Kumar and Yang Li).

   - Add a trace event for cpuidle to track missed (too deep or too
     shallow) wakeups (Kajetan Puchalski)"

* tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits)
  cpuidle: Add cpu_idle_miss trace event
  venus: pm_helpers: Fix warning in OPP during probe
  OPP: Don't drop opp->np reference while it is still in use
  OPP: Don't drop opp_table->np reference while it is still in use
  cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances
  dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible
  dt-bindings: opp: Add msm8939 to the compatible list
  dt-bindings: opp: Add missing compat devices
  dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks
  cpufreq: Change order of online() CB and policy->cpus modification
  cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call
  cpufreq: qcom-hw: Disable LMH irq when disabling policy
  cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled
  cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h
  cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()
  OPP: Remove dev{m}_pm_opp_of_add_table_noclk()
  PM / devfreq: tegra30: Register config_clks helper
  OPP: Allow config_clks helper for single clk case
  OPP: Provide a simple implementation to configure multiple clocks
  OPP: Assert clk_count == 1 for single clk helpers
  ...

1 files changed, 15 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
index 30f7b596d609..59663e897dae 100644
--- a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
+++ b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
@@ -98,6 +98,8 @@ examples:
                 capacity-dmips-mhz = <1024>;
                 clocks = <&kryocc 0>;
                 operating-points-v2 = <&cluster0_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
                 #cooling-cells = <2>;
                 next-level-cache = <&L2_0>;
                 L2_0: l2-cache {
@@ -115,6 +117,8 @@ examples:
                 capacity-dmips-mhz = <1024>;
                 clocks = <&kryocc 0>;
                 operating-points-v2 = <&cluster0_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
                 #cooling-cells = <2>;
                 next-level-cache = <&L2_0>;
             };
@@ -128,6 +132,8 @@ examples:
                 capacity-dmips-mhz = <1024>;
                 clocks = <&kryocc 1>;
                 operating-points-v2 = <&cluster1_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
                 #cooling-cells = <2>;
                 next-level-cache = <&L2_1>;
                 L2_1: l2-cache {
@@ -145,6 +151,8 @@ examples:
                 capacity-dmips-mhz = <1024>;
                 clocks = <&kryocc 1>;
                 operating-points-v2 = <&cluster1_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
                 #cooling-cells = <2>;
                 next-level-cache = <&L2_1>;
             };
@@ -182,18 +190,21 @@ examples:
                 opp-microvolt = <905000 905000 1140000>;
                 opp-supported-hw = <0x7>;
                 clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp1>;
             };
             opp-1401600000 {
                 opp-hz = /bits/ 64 <1401600000>;
                 opp-microvolt = <1140000 905000 1140000>;
                 opp-supported-hw = <0x5>;
                 clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp2>;
             };
             opp-1593600000 {
                 opp-hz = /bits/ 64 <1593600000>;
                 opp-microvolt = <1140000 905000 1140000>;
                 opp-supported-hw = <0x1>;
                 clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp3>;
             };
         };
 
@@ -207,24 +218,28 @@ examples:
                 opp-microvolt = <905000 905000 1140000>;
                 opp-supported-hw = <0x7>;
                 clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp1>;
             };
             opp-1804800000 {
                 opp-hz = /bits/ 64 <1804800000>;
                 opp-microvolt = <1140000 905000 1140000>;
                 opp-supported-hw = <0x6>;
                 clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp4>;
             };
             opp-1900800000 {
                 opp-hz = /bits/ 64 <1900800000>;
                 opp-microvolt = <1140000 905000 1140000>;
                 opp-supported-hw = <0x4>;
                 clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp5>;
             };
             opp-2150400000 {
                 opp-hz = /bits/ 64 <2150400000>;
                 opp-microvolt = <1140000 905000 1140000>;
                 opp-supported-hw = <0x1>;
                 clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp6>;
             };
         };