Convert tabs to spaces in the libjpeg code and the SIMD code (TurboJPEG retains the use of tabs for historical reasons. They were annoying in the libjpeg code primarily because they were not consistently used and because they were used to format as well as indent the code. In the case of TurboJPEG, tabs are used just to indent the code, so even if the editor assumes a different tab width, the code will still be readable.)

git-svn-id: svn://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1278 632fc199-4ca6-4c93-a231-07263d6284db

1 files changed, 189 insertions, 189 deletions

diff --git a/jdcoefct.c b/jdcoefct.c
index d38db6c..1d18a74 100644
--- a/jdcoefct.c
+++ b/jdcoefct.c
@@ -33,9 +33,9 @@ typedef struct {
 
   /* These variables keep track of the current location of the input side. */
   /* cinfo->input_iMCU_row is also used for this. */
-  JDIMENSION MCU_ctr;		/* counts MCUs processed in current row */
-  int MCU_vert_offset;		/* counts MCU rows within iMCU row */
-  int MCU_rows_per_iMCU_row;	/* number of such rows needed */
+  JDIMENSION MCU_ctr;           /* counts MCUs processed in current row */
+  int MCU_vert_offset;          /* counts MCU rows within iMCU row */
+  int MCU_rows_per_iMCU_row;    /* number of such rows needed */
 
   /* The output side's location is represented by cinfo->output_iMCU_row. */
 
@@ -61,7 +61,7 @@ typedef struct {
 #ifdef BLOCK_SMOOTHING_SUPPORTED
   /* When doing block smoothing, we latch coefficient Al values here */
   int * coef_bits_latch;
-#define SAVED_COEFS  6		/* we save coef_bits[0..5] */
+#define SAVED_COEFS  6          /* we save coef_bits[0..5] */
 #endif
 } my_coef_controller;
 
@@ -69,15 +69,15 @@ typedef my_coef_controller * my_coef_ptr;
 
 /* Forward declarations */
 METHODDEF(int) decompress_onepass
-	JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf));
+        JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf));
 #ifdef D_MULTISCAN_FILES_SUPPORTED
 METHODDEF(int) decompress_data
-	JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf));
+        JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf));
 #endif
 #ifdef BLOCK_SMOOTHING_SUPPORTED
 LOCAL(boolean) smoothing_ok JPP((j_decompress_ptr cinfo));
 METHODDEF(int) decompress_smooth_data
-	JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf));
+        JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf));
 #endif
 
 
@@ -153,7 +153,7 @@ METHODDEF(int)
 decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
 {
   my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
-  JDIMENSION MCU_col_num;	/* index of current MCU within row */
+  JDIMENSION MCU_col_num;       /* index of current MCU within row */
   JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1;
   JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
   int blkn, ci, xindex, yindex, yoffset, useful_width;
@@ -166,49 +166,49 @@ decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
   for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
        yoffset++) {
     for (MCU_col_num = coef->MCU_ctr; MCU_col_num <= last_MCU_col;
-	 MCU_col_num++) {
+         MCU_col_num++) {
       /* Try to fetch an MCU.  Entropy decoder expects buffer to be zeroed. */
       jzero_far((void FAR *) coef->MCU_buffer[0],
-		(size_t) (cinfo->blocks_in_MCU * SIZEOF(JBLOCK)));
+                (size_t) (cinfo->blocks_in_MCU * SIZEOF(JBLOCK)));
       if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) {
-	/* Suspension forced; update state counters and exit */
-	coef->MCU_vert_offset = yoffset;
-	coef->MCU_ctr = MCU_col_num;
-	return JPEG_SUSPENDED;
+        /* Suspension forced; update state counters and exit */
+        coef->MCU_vert_offset = yoffset;
+        coef->MCU_ctr = MCU_col_num;
+        return JPEG_SUSPENDED;
       }
       /* Determine where data should go in output_buf and do the IDCT thing.
        * We skip dummy blocks at the right and bottom edges (but blkn gets
        * incremented past them!).  Note the inner loop relies on having
        * allocated the MCU_buffer[] blocks sequentially.
        */
-      blkn = 0;			/* index of current DCT block within MCU */
+      blkn = 0;                 /* index of current DCT block within MCU */
       for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
-	compptr = cinfo->cur_comp_info[ci];
-	/* Don't bother to IDCT an uninteresting component. */
-	if (! compptr->component_needed) {
-	  blkn += compptr->MCU_blocks;
-	  continue;
-	}
-	inverse_DCT = cinfo->idct->inverse_DCT[compptr->component_index];
-	useful_width = (MCU_col_num < last_MCU_col) ? compptr->MCU_width
-						    : compptr->last_col_width;
-	output_ptr = output_buf[compptr->component_index] +
-	  yoffset * compptr->_DCT_scaled_size;
-	start_col = MCU_col_num * compptr->MCU_sample_width;
-	for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
-	  if (cinfo->input_iMCU_row < last_iMCU_row ||
-	      yoffset+yindex < compptr->last_row_height) {
-	    output_col = start_col;
-	    for (xindex = 0; xindex < useful_width; xindex++) {
-	      (*inverse_DCT) (cinfo, compptr,
-			      (JCOEFPTR) coef->MCU_buffer[blkn+xindex],
-			      output_ptr, output_col);
-	      output_col += compptr->_DCT_scaled_size;
-	    }
-	  }
-	  blkn += compptr->MCU_width;
-	  output_ptr += compptr->_DCT_scaled_size;
-	}
+        compptr = cinfo->cur_comp_info[ci];
+        /* Don't bother to IDCT an uninteresting component. */
+        if (! compptr->component_needed) {
+          blkn += compptr->MCU_blocks;
+          continue;
+        }
+        inverse_DCT = cinfo->idct->inverse_DCT[compptr->component_index];
+        useful_width = (MCU_col_num < last_MCU_col) ? compptr->MCU_width
+                                                    : compptr->last_col_width;
+        output_ptr = output_buf[compptr->component_index] +
+          yoffset * compptr->_DCT_scaled_size;
+        start_col = MCU_col_num * compptr->MCU_sample_width;
+        for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
+          if (cinfo->input_iMCU_row < last_iMCU_row ||
+              yoffset+yindex < compptr->last_row_height) {
+            output_col = start_col;
+            for (xindex = 0; xindex < useful_width; xindex++) {
+              (*inverse_DCT) (cinfo, compptr,
+                              (JCOEFPTR) coef->MCU_buffer[blkn+xindex],
+                              output_ptr, output_col);
+              output_col += compptr->_DCT_scaled_size;
+            }
+          }
+          blkn += compptr->MCU_width;
+          output_ptr += compptr->_DCT_scaled_size;
+        }
       }
     }
     /* Completed an MCU row, but perhaps not an iMCU row */
@@ -233,7 +233,7 @@ decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
 METHODDEF(int)
 dummy_consume_data (j_decompress_ptr cinfo)
 {
-  return JPEG_SUSPENDED;	/* Always indicate nothing was done */
+  return JPEG_SUSPENDED;        /* Always indicate nothing was done */
 }
 
 
@@ -250,7 +250,7 @@ METHODDEF(int)
 consume_data (j_decompress_ptr cinfo)
 {
   my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
-  JDIMENSION MCU_col_num;	/* index of current MCU within row */
+  JDIMENSION MCU_col_num;       /* index of current MCU within row */
   int blkn, ci, xindex, yindex, yoffset;
   JDIMENSION start_col;
   JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN];
@@ -274,25 +274,25 @@ consume_data (j_decompress_ptr cinfo)
   for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
        yoffset++) {
     for (MCU_col_num = coef->MCU_ctr; MCU_col_num < cinfo->MCUs_per_row;
-	 MCU_col_num++) {
+         MCU_col_num++) {
       /* Construct list of pointers to DCT blocks belonging to this MCU */
-      blkn = 0;			/* index of current DCT block within MCU */
+      blkn = 0;                 /* index of current DCT block within MCU */
       for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
-	compptr = cinfo->cur_comp_info[ci];
-	start_col = MCU_col_num * compptr->MCU_width;
-	for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
-	  buffer_ptr = buffer[ci][yindex+yoffset] + start_col;
-	  for (xindex = 0; xindex < compptr->MCU_width; xindex++) {
-	    coef->MCU_buffer[blkn++] = buffer_ptr++;
-	  }
-	}
+        compptr = cinfo->cur_comp_info[ci];
+        start_col = MCU_col_num * compptr->MCU_width;
+        for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
+          buffer_ptr = buffer[ci][yindex+yoffset] + start_col;
+          for (xindex = 0; xindex < compptr->MCU_width; xindex++) {
+            coef->MCU_buffer[blkn++] = buffer_ptr++;
+          }
+        }
       }
       /* Try to fetch the MCU. */
       if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) {
-	/* Suspension forced; update state counters and exit */
-	coef->MCU_vert_offset = yoffset;
-	coef->MCU_ctr = MCU_col_num;
-	return JPEG_SUSPENDED;
+        /* Suspension forced; update state counters and exit */
+        coef->MCU_vert_offset = yoffset;
+        coef->MCU_ctr = MCU_col_num;
+        return JPEG_SUSPENDED;
       }
     }
     /* Completed an MCU row, but perhaps not an iMCU row */
@@ -333,8 +333,8 @@ decompress_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
 
   /* Force some input to be done if we are getting ahead of the input. */
   while (cinfo->input_scan_number < cinfo->output_scan_number ||
-	 (cinfo->input_scan_number == cinfo->output_scan_number &&
-	  cinfo->input_iMCU_row <= cinfo->output_iMCU_row)) {
+         (cinfo->input_scan_number == cinfo->output_scan_number &&
+          cinfo->input_iMCU_row <= cinfo->output_iMCU_row)) {
     if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED)
       return JPEG_SUSPENDED;
   }
@@ -365,10 +365,10 @@ decompress_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
       buffer_ptr = buffer[block_row];
       output_col = 0;
       for (block_num = 0; block_num < compptr->width_in_blocks; block_num++) {
-	(*inverse_DCT) (cinfo, compptr, (JCOEFPTR) buffer_ptr,
-			output_ptr, output_col);
-	buffer_ptr++;
-	output_col += compptr->_DCT_scaled_size;
+        (*inverse_DCT) (cinfo, compptr, (JCOEFPTR) buffer_ptr,
+                        output_ptr, output_col);
+        buffer_ptr++;
+        output_col += compptr->_DCT_scaled_size;
       }
       output_ptr += compptr->_DCT_scaled_size;
     }
@@ -425,8 +425,8 @@ smoothing_ok (j_decompress_ptr cinfo)
   if (coef->coef_bits_latch == NULL)
     coef->coef_bits_latch = (int *)
       (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				  cinfo->num_components *
-				  (SAVED_COEFS * SIZEOF(int)));
+                                  cinfo->num_components *
+                                  (SAVED_COEFS * SIZEOF(int)));
   coef_bits_latch = coef->coef_bits_latch;
 
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
@@ -436,11 +436,11 @@ smoothing_ok (j_decompress_ptr cinfo)
       return FALSE;
     /* Verify DC & first 5 AC quantizers are nonzero to avoid zero-divide. */
     if (qtable->quantval[0] == 0 ||
-	qtable->quantval[Q01_POS] == 0 ||
-	qtable->quantval[Q10_POS] == 0 ||
-	qtable->quantval[Q20_POS] == 0 ||
-	qtable->quantval[Q11_POS] == 0 ||
-	qtable->quantval[Q02_POS] == 0)
+        qtable->quantval[Q01_POS] == 0 ||
+        qtable->quantval[Q10_POS] == 0 ||
+        qtable->quantval[Q20_POS] == 0 ||
+        qtable->quantval[Q11_POS] == 0 ||
+        qtable->quantval[Q02_POS] == 0)
       return FALSE;
     /* DC values must be at least partly known for all components. */
     coef_bits = cinfo->coef_bits[ci];
@@ -450,7 +450,7 @@ smoothing_ok (j_decompress_ptr cinfo)
     for (coefi = 1; coefi <= 5; coefi++) {
       coef_bits_latch[coefi] = coef_bits[coefi];
       if (coef_bits[coefi] != 0)
-	smoothing_useful = TRUE;
+        smoothing_useful = TRUE;
     }
     coef_bits_latch += SAVED_COEFS;
   }
@@ -489,7 +489,7 @@ decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
 
   /* Force some input to be done if we are getting ahead of the input. */
   while (cinfo->input_scan_number <= cinfo->output_scan_number &&
-	 ! cinfo->inputctl->eoi_reached) {
+         ! cinfo->inputctl->eoi_reached) {
     if (cinfo->input_scan_number == cinfo->output_scan_number) {
       /* If input is working on current scan, we ordinarily want it to
        * have completed the current row.  But if input scan is DC,
@@ -498,7 +498,7 @@ decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
        */
       JDIMENSION delta = (cinfo->Ss == 0) ? 1 : 0;
       if (cinfo->input_iMCU_row > cinfo->output_iMCU_row+delta)
-	break;
+        break;
     }
     if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED)
       return JPEG_SUSPENDED;
@@ -526,15 +526,15 @@ decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
     if (cinfo->output_iMCU_row > 0) {
       access_rows += compptr->v_samp_factor; /* prior iMCU row too */
       buffer = (*cinfo->mem->access_virt_barray)
-	((j_common_ptr) cinfo, coef->whole_image[ci],
-	 (cinfo->output_iMCU_row - 1) * compptr->v_samp_factor,
-	 (JDIMENSION) access_rows, FALSE);
-      buffer += compptr->v_samp_factor;	/* point to current iMCU row */
+        ((j_common_ptr) cinfo, coef->whole_image[ci],
+         (cinfo->output_iMCU_row - 1) * compptr->v_samp_factor,
+         (JDIMENSION) access_rows, FALSE);
+      buffer += compptr->v_samp_factor; /* point to current iMCU row */
       first_row = FALSE;
     } else {
       buffer = (*cinfo->mem->access_virt_barray)
-	((j_common_ptr) cinfo, coef->whole_image[ci],
-	 (JDIMENSION) 0, (JDIMENSION) access_rows, FALSE);
+        ((j_common_ptr) cinfo, coef->whole_image[ci],
+         (JDIMENSION) 0, (JDIMENSION) access_rows, FALSE);
       first_row = TRUE;
     }
     /* Fetch component-dependent info */
@@ -552,13 +552,13 @@ decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
     for (block_row = 0; block_row < block_rows; block_row++) {
       buffer_ptr = buffer[block_row];
       if (first_row && block_row == 0)
-	prev_block_row = buffer_ptr;
+        prev_block_row = buffer_ptr;
       else
-	prev_block_row = buffer[block_row-1];
+        prev_block_row = buffer[block_row-1];
       if (last_row && block_row == block_rows-1)
-	next_block_row = buffer_ptr;
+        next_block_row = buffer_ptr;
       else
-	next_block_row = buffer[block_row+1];
+        next_block_row = buffer[block_row+1];
       /* We fetch the surrounding DC values using a sliding-register approach.
        * Initialize all nine here so as to do the right thing on narrow pics.
        */
@@ -568,102 +568,102 @@ decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
       output_col = 0;
       last_block_column = compptr->width_in_blocks - 1;
       for (block_num = 0; block_num <= last_block_column; block_num++) {
-	/* Fetch current DCT block into workspace so we can modify it. */
-	jcopy_block_row(buffer_ptr, (JBLOCKROW) workspace, (JDIMENSION) 1);
-	/* Update DC values */
-	if (block_num < last_block_column) {
-	  DC3 = (int) prev_block_row[1][0];
-	  DC6 = (int) buffer_ptr[1][0];
-	  DC9 = (int) next_block_row[1][0];
-	}
-	/* Compute coefficient estimates per K.8.
-	 * An estimate is applied only if coefficient is still zero,
-	 * and is not known to be fully accurate.
-	 */
-	/* AC01 */
-	if ((Al=coef_bits[1]) != 0 && workspace[1] == 0) {
-	  num = 36 * Q00 * (DC4 - DC6);
-	  if (num >= 0) {
-	    pred = (int) (((Q01<<7) + num) / (Q01<<8));
-	    if (Al > 0 && pred >= (1<<Al))
-	      pred = (1<<Al)-1;
-	  } else {
-	    pred = (int) (((Q01<<7) - num) / (Q01<<8));
-	    if (Al > 0 && pred >= (1<<Al))
-	      pred = (1<<Al)-1;
-	    pred = -pred;
-	  }
-	  workspace[1] = (JCOEF) pred;
-	}
-	/* AC10 */
-	if ((Al=coef_bits[2]) != 0 && workspace[8] == 0) {
-	  num = 36 * Q00 * (DC2 - DC8);
-	  if (num >= 0) {
-	    pred = (int) (((Q10<<7) + num) / (Q10<<8));
-	    if (Al > 0 && pred >= (1<<Al))
-	      pred = (1<<Al)-1;
-	  } else {
-	    pred = (int) (((Q10<<7) - num) / (Q10<<8));
-	    if (Al > 0 && pred >= (1<<Al))
-	      pred = (1<<Al)-1;
-	    pred = -pred;
-	  }
-	  workspace[8] = (JCOEF) pred;
-	}
-	/* AC20 */
-	if ((Al=coef_bits[3]) != 0 && workspace[16] == 0) {
-	  num = 9 * Q00 * (DC2 + DC8 - 2*DC5);
-	  if (num >= 0) {
-	    pred = (int) (((Q20<<7) + num) / (Q20<<8));
-	    if (Al > 0 && pred >= (1<<Al))
-	      pred = (1<<Al)-1;
-	  } else {
-	    pred = (int) (((Q20<<7) - num) / (Q20<<8));
-	    if (Al > 0 && pred >= (1<<Al))
-	      pred = (1<<Al)-1;
-	    pred = -pred;
-	  }
-	  workspace[16] = (JCOEF) pred;
-	}
-	/* AC11 */
-	if ((Al=coef_bits[4]) != 0 && workspace[9] == 0) {
-	  num = 5 * Q00 * (DC1 - DC3 - DC7 + DC9);
-	  if (num >= 0) {
-	    pred = (int) (((Q11<<7) + num) / (Q11<<8));
-	    if (Al > 0 && pred >= (1<<Al))
-	      pred = (1<<Al)-1;
-	  } else {
-	    pred = (int) (((Q11<<7) - num) / (Q11<<8));
-	    if (Al > 0 && pred >= (1<<Al))
-	      pred = (1<<Al)-1;
-	    pred = -pred;
-	  }
-	  workspace[9] = (JCOEF) pred;
-	}
-	/* AC02 */
-	if ((Al=coef_bits[5]) != 0 && workspace[2] == 0) {
-	  num = 9 * Q00 * (DC4 + DC6 - 2*DC5);
-	  if (num >= 0) {
-	    pred = (int) (((Q02<<7) + num) / (Q02<<8));
-	    if (Al > 0 && pred >= (1<<Al))
-	      pred = (1<<Al)-1;
-	  } else {
-	    pred = (int) (((Q02<<7) - num) / (Q02<<8));
-	    if (Al > 0 && pred >= (1<<Al))
-	      pred = (1<<Al)-1;
-	    pred = -pred;
-	  }
-	  workspace[2] = (JCOEF) pred;
-	}
-	/* OK, do the IDCT */
-	(*inverse_DCT) (cinfo, compptr, (JCOEFPTR) workspace,
-			output_ptr, output_col);
-	/* Advance for next column */
-	DC1 = DC2; DC2 = DC3;
-	DC4 = DC5; DC5 = DC6;
-	DC7 = DC8; DC8 = DC9;
-	buffer_ptr++, prev_block_row++, next_block_row++;
-	output_col += compptr->_DCT_scaled_size;
+        /* Fetch current DCT block into workspace so we can modify it. */
+        jcopy_block_row(buffer_ptr, (JBLOCKROW) workspace, (JDIMENSION) 1);
+        /* Update DC values */
+        if (block_num < last_block_column) {
+          DC3 = (int) prev_block_row[1][0];
+          DC6 = (int) buffer_ptr[1][0];
+          DC9 = (int) next_block_row[1][0];
+        }
+        /* Compute coefficient estimates per K.8.
+         * An estimate is applied only if coefficient is still zero,
+         * and is not known to be fully accurate.
+         */
+        /* AC01 */
+        if ((Al=coef_bits[1]) != 0 && workspace[1] == 0) {
+          num = 36 * Q00 * (DC4 - DC6);
+          if (num >= 0) {
+            pred = (int) (((Q01<<7) + num) / (Q01<<8));
+            if (Al > 0 && pred >= (1<<Al))
+              pred = (1<<Al)-1;
+          } else {
+            pred = (int) (((Q01<<7) - num) / (Q01<<8));
+            if (Al > 0 && pred >= (1<<Al))
+              pred = (1<<Al)-1;
+            pred = -pred;
+          }
+          workspace[1] = (JCOEF) pred;
+        }
+        /* AC10 */
+        if ((Al=coef_bits[2]) != 0 && workspace[8] == 0) {
+          num = 36 * Q00 * (DC2 - DC8);
+          if (num >= 0) {
+            pred = (int) (((Q10<<7) + num) / (Q10<<8));
+            if (Al > 0 && pred >= (1<<Al))
+              pred = (1<<Al)-1;
+          } else {
+            pred = (int) (((Q10<<7) - num) / (Q10<<8));
+            if (Al > 0 && pred >= (1<<Al))
+              pred = (1<<Al)-1;
+            pred = -pred;
+          }
+          workspace[8] = (JCOEF) pred;
+        }
+        /* AC20 */
+        if ((Al=coef_bits[3]) != 0 && workspace[16] == 0) {
+          num = 9 * Q00 * (DC2 + DC8 - 2*DC5);
+          if (num >= 0) {
+            pred = (int) (((Q20<<7) + num) / (Q20<<8));
+            if (Al > 0 && pred >= (1<<Al))
+              pred = (1<<Al)-1;
+          } else {
+            pred = (int) (((Q20<<7) - num) / (Q20<<8));
+            if (Al > 0 && pred >= (1<<Al))
+              pred = (1<<Al)-1;
+            pred = -pred;
+          }
+          workspace[16] = (JCOEF) pred;
+        }
+        /* AC11 */
+        if ((Al=coef_bits[4]) != 0 && workspace[9] == 0) {
+          num = 5 * Q00 * (DC1 - DC3 - DC7 + DC9);
+          if (num >= 0) {
+            pred = (int) (((Q11<<7) + num) / (Q11<<8));
+            if (Al > 0 && pred >= (1<<Al))
+              pred = (1<<Al)-1;
+          } else {
+            pred = (int) (((Q11<<7) - num) / (Q11<<8));
+            if (Al > 0 && pred >= (1<<Al))
+              pred = (1<<Al)-1;
+            pred = -pred;
+          }
+          workspace[9] = (JCOEF) pred;
+        }
+        /* AC02 */
+        if ((Al=coef_bits[5]) != 0 && workspace[2] == 0) {
+          num = 9 * Q00 * (DC4 + DC6 - 2*DC5);
+          if (num >= 0) {
+            pred = (int) (((Q02<<7) + num) / (Q02<<8));
+            if (Al > 0 && pred >= (1<<Al))
+              pred = (1<<Al)-1;
+          } else {
+            pred = (int) (((Q02<<7) - num) / (Q02<<8));
+            if (Al > 0 && pred >= (1<<Al))
+              pred = (1<<Al)-1;
+            pred = -pred;
+          }
+          workspace[2] = (JCOEF) pred;
+        }
+        /* OK, do the IDCT */
+        (*inverse_DCT) (cinfo, compptr, (JCOEFPTR) workspace,
+                        output_ptr, output_col);
+        /* Advance for next column */
+        DC1 = DC2; DC2 = DC3;
+        DC4 = DC5; DC5 = DC6;
+        DC7 = DC8; DC8 = DC9;
+        buffer_ptr++, prev_block_row++, next_block_row++;
+        output_col += compptr->_DCT_scaled_size;
       }
       output_ptr += compptr->_DCT_scaled_size;
     }
@@ -688,7 +688,7 @@ jinit_d_coef_controller (j_decompress_ptr cinfo, boolean need_full_buffer)
 
   coef = (my_coef_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				SIZEOF(my_coef_controller));
+                                SIZEOF(my_coef_controller));
   cinfo->coef = (struct jpeg_d_coef_controller *) coef;
   coef->pub.start_input_pass = start_input_pass;
   coef->pub.start_output_pass = start_output_pass;
@@ -706,20 +706,20 @@ jinit_d_coef_controller (j_decompress_ptr cinfo, boolean need_full_buffer)
     jpeg_component_info *compptr;
 
     for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-	 ci++, compptr++) {
+         ci++, compptr++) {
       access_rows = compptr->v_samp_factor;
 #ifdef BLOCK_SMOOTHING_SUPPORTED
       /* If block smoothing could be used, need a bigger window */
       if (cinfo->progressive_mode)
-	access_rows *= 3;
+        access_rows *= 3;
 #endif
       coef->whole_image[ci] = (*cinfo->mem->request_virt_barray)
-	((j_common_ptr) cinfo, JPOOL_IMAGE, TRUE,
-	 (JDIMENSION) jround_up((long) compptr->width_in_blocks,
-				(long) compptr->h_samp_factor),
-	 (JDIMENSION) jround_up((long) compptr->height_in_blocks,
-				(long) compptr->v_samp_factor),
-	 (JDIMENSION) access_rows);
+        ((j_common_ptr) cinfo, JPOOL_IMAGE, TRUE,
+         (JDIMENSION) jround_up((long) compptr->width_in_blocks,
+                                (long) compptr->h_samp_factor),
+         (JDIMENSION) jround_up((long) compptr->height_in_blocks,
+                                (long) compptr->v_samp_factor),
+         (JDIMENSION) access_rows);
     }
     coef->pub.consume_data = consume_data;
     coef->pub.decompress_data = decompress_data;
@@ -734,7 +734,7 @@ jinit_d_coef_controller (j_decompress_ptr cinfo, boolean need_full_buffer)
 
     buffer = (JBLOCKROW)
       (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				  D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
+                                  D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
     for (i = 0; i < D_MAX_BLOCKS_IN_MCU; i++) {
       coef->MCU_buffer[i] = buffer + i;
     }