Initial creation of sourceware repository

1 files changed, 0 insertions, 733 deletions

diff --git a/gdb/arc-tdep.c b/gdb/arc-tdep.c
deleted file mode 100644
index 92957700f9..0000000000
--- a/gdb/arc-tdep.c
+++ /dev/null
@@ -1,733 +0,0 @@
-/* ARC target-dependent stuff.
-   Copyright (C) 1995, 1997 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include "defs.h"
-#include "frame.h"
-#include "inferior.h"
-#include "gdbcore.h"
-#include "target.h"
-#include "floatformat.h"
-#include "symtab.h"
-#include "gdbcmd.h"
-
-/* Current CPU, set with the "set cpu" command.  */
-static int arc_bfd_mach_type;
-char *arc_cpu_type;
-char *tmp_arc_cpu_type;
-
-/* Table of cpu names.  */
-struct {
-  char *name;
-  int value;
-} arc_cpu_type_table[] = {
-  { "base", bfd_mach_arc_base },
-  { NULL, 0 }
-};
-
-/* Used by simulator.  */
-int display_pipeline_p;
-int cpu_timer;
-/* This one must have the same type as used in the emulator.
-   It's currently an enum so this should be ok for now.  */
-int debug_pipeline_p;
-
-#define ARC_CALL_SAVED_REG(r) ((r) >= 16 && (r) < 24)
-
-#define OPMASK	0xf8000000
-
-/* Instruction field accessor macros.
-   See the Programmer's Reference Manual.  */
-#define X_OP(i) (((i) >> 27) & 0x1f)
-#define X_A(i) (((i) >> 21) & 0x3f)
-#define X_B(i) (((i) >> 15) & 0x3f)
-#define X_C(i) (((i) >> 9) & 0x3f)
-#define X_D(i) ((((i) & 0x1ff) ^ 0x100) - 0x100)
-#define X_L(i) (((((i) >> 5) & 0x3ffffc) ^ 0x200000) - 0x200000)
-#define X_N(i) (((i) >> 5) & 3)
-#define X_Q(i) ((i) & 0x1f)
-
-/* Return non-zero if X is a short immediate data indicator.  */
-#define SHIMM_P(x) ((x) == 61 || (x) == 63)
-
-/* Return non-zero if X is a "long" (32 bit) immediate data indicator.  */
-#define LIMM_P(x) ((x) == 62)
-
-/* Build a simple instruction.  */
-#define BUILD_INSN(op, a, b, c, d) \
-  ((((op) & 31) << 27) \
-   | (((a) & 63) << 21) \
-   | (((b) & 63) << 15) \
-   | (((c) & 63) << 9) \
-   | ((d) & 511))
-
-/* Codestream stuff.  */
-static void codestream_read PARAMS ((unsigned int *, int));
-static void codestream_seek PARAMS ((CORE_ADDR));
-static unsigned int codestream_fill PARAMS ((int));
-
-#define CODESTREAM_BUFSIZ 16 
-static CORE_ADDR codestream_next_addr;
-static CORE_ADDR codestream_addr;
-static unsigned int codestream_buf[CODESTREAM_BUFSIZ];
-static int codestream_off;
-static int codestream_cnt;
-
-#define codestream_tell() \
-  (codestream_addr + codestream_off * sizeof (codestream_buf[0]))
-#define codestream_peek() \
-  (codestream_cnt == 0 \
-   ? codestream_fill (1) \
-   : codestream_buf[codestream_off])
-#define codestream_get() \
-  (codestream_cnt-- == 0 \
-   ? codestream_fill (0) \
-   : codestream_buf[codestream_off++])
-
-static unsigned int 
-codestream_fill (peek_flag)
-    int peek_flag;
-{
-  codestream_addr = codestream_next_addr;
-  codestream_next_addr += CODESTREAM_BUFSIZ * sizeof (codestream_buf[0]);
-  codestream_off = 0;
-  codestream_cnt = CODESTREAM_BUFSIZ;
-  read_memory (codestream_addr, (char *) codestream_buf,
-	       CODESTREAM_BUFSIZ * sizeof (codestream_buf[0]));
-  /* FIXME: check return code?  */
-
-  /* Handle byte order differences.  */
-  if (HOST_BYTE_ORDER != TARGET_BYTE_ORDER)
-    {
-      register unsigned int i, j, n = sizeof (codestream_buf[0]);
-      register char tmp, *p;
-      for (i = 0, p = (char *) codestream_buf; i < CODESTREAM_BUFSIZ;
-	   ++i, p += n)
-	for (j = 0; j < n / 2; ++j)
-	  tmp = p[j], p[j] = p[n - 1 - j], p[n - 1 - j] = tmp;
-    }
-  
-  if (peek_flag)
-    return codestream_peek ();
-  else
-    return codestream_get ();
-}
-
-static void
-codestream_seek (place)
-    CORE_ADDR place;
-{
-  codestream_next_addr = place / CODESTREAM_BUFSIZ;
-  codestream_next_addr *= CODESTREAM_BUFSIZ;
-  codestream_cnt = 0;
-  codestream_fill (1);
-  while (codestream_tell () != place)
-    codestream_get ();
-}
-
-/* This function is currently unused but leave in for now.  */
-
-static void
-codestream_read (buf, count)
-     unsigned int *buf;
-     int count;
-{
-  unsigned int *p;
-  int i;
-  p = buf;
-  for (i = 0; i < count; i++)
-    *p++ = codestream_get ();
-}
-
-/* Set up prologue scanning and return the first insn.  */
-
-static unsigned int
-setup_prologue_scan (pc)
-     CORE_ADDR pc;
-{
-  unsigned int insn;
-
-  codestream_seek (pc);
-  insn = codestream_get ();
-
-  return insn;
-}
-
-/*
- * Find & return amount a local space allocated, and advance codestream to
- * first register push (if any).
- * If entry sequence doesn't make sense, return -1, and leave 
- * codestream pointer random.
- */
-
-static long
-arc_get_frame_setup (pc)
-     CORE_ADDR pc;
-{
-  unsigned int insn;
-  /* Size of frame or -1 if unrecognizable prologue.  */
-  int frame_size = -1;
-  /* An initial "sub sp,sp,N" may or may not be for a stdarg fn.  */
-  int maybe_stdarg_decr = -1;
-
-  insn = setup_prologue_scan (pc);
-
-  /* The authority for what appears here is the home-grown ABI.
-     The most recent version is 1.2.  */
-
-  /* First insn may be "sub sp,sp,N" if stdarg fn.  */
-  if ((insn & BUILD_INSN (-1, -1, -1, -1, 0))
-      == BUILD_INSN (10, SP_REGNUM, SP_REGNUM, SHIMM_REGNUM, 0))
-    {
-      maybe_stdarg_decr = X_D (insn);
-      insn = codestream_get ();
-    }
-
-  if ((insn & BUILD_INSN (-1, 0, -1, -1, -1))	/* st blink,[sp,4] */
-      == BUILD_INSN (2, 0, SP_REGNUM, BLINK_REGNUM, 4))
-    {
-      insn = codestream_get ();
-      /* Frame may not be necessary, even though blink is saved.
-	 At least this is something we recognize.  */
-      frame_size = 0;
-    }
-
-  if ((insn & BUILD_INSN (-1, 0, -1, -1, -1))		/* st fp,[sp] */
-      == BUILD_INSN (2, 0, SP_REGNUM, FP_REGNUM, 0))
-    {	
-      insn = codestream_get ();
-      if ((insn & BUILD_INSN (-1, -1, -1, -1, 0))
-	       != BUILD_INSN (12, FP_REGNUM, SP_REGNUM, SP_REGNUM, 0))
-	return -1;
-
-      /* Check for stack adjustment sub sp,sp,N.  */
-      insn = codestream_peek ();
-      if ((insn & BUILD_INSN (-1, -1, -1, 0, 0))
-	  == BUILD_INSN (10, SP_REGNUM, SP_REGNUM, 0, 0))
-	{
-	  if (LIMM_P (X_C (insn)))
-	    frame_size = codestream_get ();
-	  else if (SHIMM_P (X_C (insn)))
-	    frame_size = X_D (insn);
-	  else
-	    return -1;
-	  if (frame_size < 0)
-	    return -1;
-
-          codestream_get ();
-
-	  /* This sequence is used to get the address of the return
-	     buffer for a function that returns a structure.  */
-	  insn = codestream_peek ();
-	  if (insn & OPMASK == 0x60000000)
-	    codestream_get ();
-	}
-      /* Frameless fn.  */
-      else
-	{
-	  frame_size = 0;
-	}
-    }
-
-  /* If we found a "sub sp,sp,N" and nothing else, it may or may not be a
-     stdarg fn.  The stdarg decrement is not treated as part of the frame size,
-     so we have a dilemma: what do we return?  For now, if we get a
-     "sub sp,sp,N" and nothing else assume this isn't a stdarg fn.  One way
-     to fix this completely would be to add a bit to the function descriptor
-     that says the function is a stdarg function.  */
-
-  if (frame_size < 0 && maybe_stdarg_decr > 0)
-    return maybe_stdarg_decr;
-  return frame_size;
-}
-
-/* Given a pc value, skip it forward past the function prologue by
-   disassembling instructions that appear to be a prologue.
-
-   If FRAMELESS_P is set, we are only testing to see if the function
-   is frameless.  If it is a frameless function, return PC unchanged.
-   This allows a quicker answer.  */
-
-CORE_ADDR
-skip_prologue (pc, frameless_p)
-     CORE_ADDR pc;
-     int frameless_p;
-{
-  unsigned int insn;
-  int i, frame_size;
-
-  if ((frame_size = arc_get_frame_setup (pc)) < 0)
-    return (pc);
-
-  if (frameless_p)
-    return frame_size == 0 ? pc : codestream_tell ();
-
-  /* Skip over register saves.  */
-  for (i = 0; i < 8; i++)
-    {
-      insn = codestream_peek ();
-      if ((insn & BUILD_INSN (-1, 0, -1, 0, 0))
-	  != BUILD_INSN (2, 0, SP_REGNUM, 0, 0))
-	break; /* not st insn */
-      if (! ARC_CALL_SAVED_REG (X_C (insn)))
-	break;
-      codestream_get ();
-    }
-
-  return codestream_tell ();
-}
-
-/* Return the return address for a frame.
-   This is used to implement FRAME_SAVED_PC.
-   This is taken from frameless_look_for_prologue.  */
-
-CORE_ADDR
-arc_frame_saved_pc (frame)
-     struct frame_info *frame;
-{
-  CORE_ADDR func_start;
-  unsigned int insn;
-
-  func_start = get_pc_function_start (frame->pc) + FUNCTION_START_OFFSET;
-  if (func_start == 0)
-    {
-      /* Best guess.  */
-      return ARC_PC_TO_REAL_ADDRESS (read_memory_integer (FRAME_FP (frame) + 4, 4));
-    }
-
-  /* The authority for what appears here is the home-grown ABI.
-     The most recent version is 1.2.  */
-
-  insn = setup_prologue_scan (func_start);
-
-  /* First insn may be "sub sp,sp,N" if stdarg fn.  */
-  if ((insn & BUILD_INSN (-1, -1, -1, -1, 0))
-      == BUILD_INSN (10, SP_REGNUM, SP_REGNUM, SHIMM_REGNUM, 0))
-    insn = codestream_get ();
-
-  /* If the next insn is "st blink,[sp,4]" we can get blink from there.
-     Otherwise this is a leaf function and we can use blink.  Note that
-     this still allows for the case where a leaf function saves/clobbers/
-     restores blink.  */
-
-  if ((insn & BUILD_INSN (-1, 0, -1, -1, -1))	/* st blink,[sp,4] */
-      != BUILD_INSN (2, 0, SP_REGNUM, BLINK_REGNUM, 4))
-    return ARC_PC_TO_REAL_ADDRESS (read_register (BLINK_REGNUM));
-  else
-    return ARC_PC_TO_REAL_ADDRESS (read_memory_integer (FRAME_FP (frame) + 4, 4));
-}
-
-/*
- * Parse the first few instructions of the function to see
- * what registers were stored.
- *
- * The startup sequence can be at the start of the function.
- * 'st blink,[sp+4], st fp,[sp], mov fp,sp' 
- *
- * Local space is allocated just below by sub sp,sp,nnn.
- * Next, the registers used by this function are stored (as offsets from sp).
- */
-
-void
-frame_find_saved_regs (fip, fsrp)
-     struct frame_info *fip;
-     struct frame_saved_regs *fsrp;
-{
-  long locals;
-  unsigned int insn;
-  CORE_ADDR dummy_bottom;
-  CORE_ADDR adr;
-  int i, regnum, offset;
-
-  memset (fsrp, 0, sizeof *fsrp);
-
-  /* If frame is the end of a dummy, compute where the beginning would be.  */
-  dummy_bottom = fip->frame - 4 - REGISTER_BYTES - CALL_DUMMY_LENGTH;
-
-  /* Check if the PC is in the stack, in a dummy frame.  */
-  if (dummy_bottom <= fip->pc && fip->pc <= fip->frame) 
-    {
-      /* all regs were saved by push_call_dummy () */
-      adr = fip->frame;
-      for (i = 0; i < NUM_REGS; i++) 
-	{
-	  adr -= REGISTER_RAW_SIZE (i);
-	  fsrp->regs[i] = adr;
-	}
-      return;
-    }
-
-  locals = arc_get_frame_setup (get_pc_function_start (fip->pc));
-
-  if (locals >= 0) 
-    {
-      /* Set `adr' to the value of `sp'.  */
-      adr = fip->frame - locals;
-      for (i = 0; i < 8; i++)
-	{
-	  insn = codestream_get ();
-	  if ((insn & BUILD_INSN (-1, 0, -1, 0, 0))
-	       != BUILD_INSN (2, 0, SP_REGNUM, 0, 0))
-	    break;
-          regnum = X_C (insn);
-	  offset = X_D (insn);
-	  fsrp->regs[regnum] = adr + offset;
-	}
-    }
-
-  fsrp->regs[PC_REGNUM] = fip->frame + 4;
-  fsrp->regs[FP_REGNUM] = fip->frame;
-}
-
-void
-push_dummy_frame ()
-{
-  CORE_ADDR sp = read_register (SP_REGNUM);
-  int regnum;
-  char regbuf[MAX_REGISTER_RAW_SIZE];
-
-  read_register_gen (PC_REGNUM, regbuf);
-  write_memory (sp+4, regbuf, REGISTER_SIZE);
-  read_register_gen (FP_REGNUM, regbuf);
-  write_memory (sp, regbuf, REGISTER_SIZE);
-  write_register (FP_REGNUM, sp);
-  for (regnum = 0; regnum < NUM_REGS; regnum++)
-    {
-      read_register_gen (regnum, regbuf);
-      sp = push_bytes (sp, regbuf, REGISTER_RAW_SIZE (regnum));
-    }
-  sp += (2*REGISTER_SIZE);
-  write_register (SP_REGNUM, sp);
-}
-
-void
-pop_frame ()
-{
-  struct frame_info *frame = get_current_frame ();
-  CORE_ADDR fp;
-  int regnum;
-  struct frame_saved_regs fsr;
-  char regbuf[MAX_REGISTER_RAW_SIZE];
-  
-  fp = FRAME_FP (frame);
-  get_frame_saved_regs (frame, &fsr);
-  for (regnum = 0; regnum < NUM_REGS; regnum++) 
-    {
-      CORE_ADDR adr;
-      adr = fsr.regs[regnum];
-      if (adr)
-	{
-	  read_memory (adr, regbuf, REGISTER_RAW_SIZE (regnum));
-	  write_register_bytes (REGISTER_BYTE (regnum), regbuf,
-				REGISTER_RAW_SIZE (regnum));
-	}
-    }
-  write_register (FP_REGNUM, read_memory_integer (fp, 4));
-  write_register (PC_REGNUM, read_memory_integer (fp + 4, 4));
-  write_register (SP_REGNUM, fp + 8);
-  flush_cached_frames ();
-}
-
-/* Simulate single-step.  */
-
-typedef enum
-{
-  NORMAL4, /* a normal 4 byte insn */
-  NORMAL8, /* a normal 8 byte insn */
-  BRANCH4, /* a 4 byte branch insn, including ones without delay slots */
-  BRANCH8, /* an 8 byte branch insn, including ones with delay slots */
-} insn_type;
-
-/* Return the type of INSN and store in TARGET the destination address of a
-   branch if this is one.  */
-/* ??? Need to verify all cases are properly handled.  */
-
-static insn_type
-get_insn_type (insn, pc, target)
-     unsigned long insn;
-     CORE_ADDR pc, *target;
-{
-  unsigned long limm;
-
-  switch (insn >> 27)
-    {
-    case 0 : case 1 : case 2 : /* load/store insns */
-      if (LIMM_P (X_A (insn))
-	  || LIMM_P (X_B (insn))
-	  || LIMM_P (X_C (insn)))
-	return NORMAL8;
-      return NORMAL4;
-    case 4 : case 5 : case 6 : /* branch insns */
-      *target = pc + 4 + X_L (insn);
-      /* ??? It isn't clear that this is always the right answer.
-	 The problem occurs when the next insn is an 8 byte insn.  If the
-	 branch is conditional there's no worry as there shouldn't be an 8
-	 byte insn following.  The programmer may be cheating if s/he knows
-	 the branch will never be taken, but we don't deal with that.
-	 Note that the programmer is also allowed to play games by putting
-	 an insn with long immediate data in the delay slot and then duplicate
-	 the long immediate data at the branch target.  Ugh!  */
-      if (X_N (insn) == 0)
-	return BRANCH4;
-      return BRANCH8;
-    case 7 : /* jump insns */
-      if (LIMM_P (X_B (insn)))
-	{
-	  limm = read_memory_integer (pc + 4, 4);
-	  *target = ARC_PC_TO_REAL_ADDRESS (limm);
-	  return BRANCH8;
-	}
-      if (SHIMM_P (X_B (insn)))
-	*target = ARC_PC_TO_REAL_ADDRESS (X_D (insn));
-      else
-	*target = ARC_PC_TO_REAL_ADDRESS (read_register (X_B (insn)));
-      if (X_Q (insn) == 0 && X_N (insn) == 0)
-	return BRANCH4;
-      return BRANCH8;
-    default : /* arithmetic insns, etc. */
-      if (LIMM_P (X_A (insn))
-	  || LIMM_P (X_B (insn))
-	  || LIMM_P (X_C (insn)))
-	return NORMAL8;
-      return NORMAL4;
-    }
-}
-
-/* single_step() is called just before we want to resume the inferior, if we
-   want to single-step it but there is no hardware or kernel single-step
-   support.  We find all the possible targets of the coming instruction and
-   breakpoint them.
-
-   single_step is also called just after the inferior stops.  If we had
-   set up a simulated single-step, we undo our damage.  */
-
-void
-arc_software_single_step (ignore, insert_breakpoints_p)
-     enum target_signal ignore; /* sig but we don't need it */
-     int insert_breakpoints_p;
-{
-  static CORE_ADDR next_pc, target;
-  static int brktrg_p;
-  typedef char binsn_quantum[BREAKPOINT_MAX];
-  static binsn_quantum break_mem[2];
-
-  if (insert_breakpoints_p)
-    {
-      insn_type type;
-      CORE_ADDR pc;
-      unsigned long insn;
-
-      pc = read_register (PC_REGNUM);
-      insn = read_memory_integer (pc, 4);
-      type = get_insn_type (insn, pc, &target);
-
-      /* Always set a breakpoint for the insn after the branch.  */
-      next_pc = pc + ((type == NORMAL8 || type == BRANCH8) ? 8 : 4);
-      target_insert_breakpoint (next_pc, break_mem[0]);
-
-      brktrg_p = 0;
-
-      if ((type == BRANCH4 || type == BRANCH8)
-	  /* Watch out for branches to the following location.
-	     We just stored a breakpoint there and another call to
-	     target_insert_breakpoint will think the real insn is the
-	     breakpoint we just stored there.  */
-	  && target != next_pc)
-	{
-	  brktrg_p = 1;
-	  target_insert_breakpoint (target, break_mem[1]);
-	}
-
-    }
-  else
-    {
-      /* Remove breakpoints.  */
-      target_remove_breakpoint (next_pc, break_mem[0]);
-
-      if (brktrg_p)
-	target_remove_breakpoint (target, break_mem[1]);
-
-      /* Fix the pc.  */
-      stop_pc -= DECR_PC_AFTER_BREAK;
-      write_pc (stop_pc);
-    }
-}
-
-#ifdef GET_LONGJMP_TARGET
-/* Figure out where the longjmp will land.  Slurp the args out of the stack.
-   We expect the first arg to be a pointer to the jmp_buf structure from which
-   we extract the pc (JB_PC) that we will land at.  The pc is copied into PC.
-   This routine returns true on success. */
-
-int
-get_longjmp_target(pc)
-     CORE_ADDR *pc;
-{
-  char buf[TARGET_PTR_BIT / TARGET_CHAR_BIT];
-  CORE_ADDR sp, jb_addr;
-
-  sp = read_register (SP_REGNUM);
-
-  if (target_read_memory (sp + SP_ARG0, /* Offset of first arg on stack */
-			  buf,
-			  TARGET_PTR_BIT / TARGET_CHAR_BIT))
-    return 0;
-
-  jb_addr = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT);
-
-  if (target_read_memory (jb_addr + JB_PC * JB_ELEMENT_SIZE, buf,
-			  TARGET_PTR_BIT / TARGET_CHAR_BIT))
-    return 0;
-
-  *pc = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT);
-
-  return 1;
-}
-#endif /* GET_LONGJMP_TARGET */
-
-/* Disassemble one instruction.  */
-
-static int
-arc_print_insn (vma, info)
-     bfd_vma vma;
-     disassemble_info *info;
-{
-  static int current_mach;
-  static int current_endian;
-  static disassembler_ftype current_disasm;
-
-  if (current_disasm == NULL
-      || arc_bfd_mach_type != current_mach
-      || TARGET_BYTE_ORDER != current_endian)
-    {
-      current_mach = arc_bfd_mach_type;
-      current_endian = TARGET_BYTE_ORDER;
-      current_disasm = arc_get_disassembler (current_mach,
-					     current_endian == BIG_ENDIAN);
-    }
-
-  return (*current_disasm) (vma, info);
-}
-
-/* Command to set cpu type.  */
-
-void
-arc_set_cpu_type_command (args, from_tty)
-     char *args;
-     int from_tty;
-{
-  int i;
-
-  if (tmp_arc_cpu_type == NULL || *tmp_arc_cpu_type == '\0')
-    {
-      printf_unfiltered ("The known ARC cpu types are as follows:\n");
-      for (i = 0; arc_cpu_type_table[i].name != NULL; ++i)
-	printf_unfiltered ("%s\n", arc_cpu_type_table[i].name);
-
-      /* Restore the value.  */
-      tmp_arc_cpu_type = strsave (arc_cpu_type);
-
-      return;
-    }
-  
-  if (!arc_set_cpu_type (tmp_arc_cpu_type))
-    {
-      error ("Unknown cpu type `%s'.", tmp_arc_cpu_type);
-      /* Restore its value.  */
-      tmp_arc_cpu_type = strsave (arc_cpu_type);
-    }
-}
-
-static void
-arc_show_cpu_type_command (args, from_tty)
-     char *args;
-     int from_tty;
-{
-}
-
-/* Modify the actual cpu type.
-   Result is a boolean indicating success.  */
-
-int
-arc_set_cpu_type (str)
-     char *str;
-{
-  int i, j;
-
-  if (str == NULL)
-    return 0;
-
-  for (i = 0; arc_cpu_type_table[i].name != NULL; ++i)
-    {
-      if (strcasecmp (str, arc_cpu_type_table[i].name) == 0)
-	{
-	  arc_cpu_type = str;
-	  arc_bfd_mach_type = arc_cpu_type_table[i].value;
-	  return 1;
-	}
-    }
-
-  return 0;
-}
-
-void
-_initialize_arc_tdep ()
-{
-  struct cmd_list_element *c;
-
-  c = add_set_cmd ("cpu", class_support, var_string_noescape,
-		   (char *) &tmp_arc_cpu_type,
-		   "Set the type of ARC cpu in use.\n\
-This command has two purposes.  In a multi-cpu system it lets one\n\
-change the cpu being debugged.  It also gives one access to\n\
-cpu-type-specific registers and recognize cpu-type-specific instructions.\
-",
-		   &setlist);
-  c->function.cfunc = arc_set_cpu_type_command;
-  c = add_show_from_set (c, &showlist);
-  c->function.cfunc = arc_show_cpu_type_command;
-
-  /* We have to use strsave here because the `set' command frees it before
-     setting a new value.  */
-  tmp_arc_cpu_type = strsave (DEFAULT_ARC_CPU_TYPE);
-  arc_set_cpu_type (tmp_arc_cpu_type);
-
-  c = add_set_cmd ("displaypipeline", class_support, var_zinteger,
-		   (char *) &display_pipeline_p,
-		   "Set pipeline display (simulator only).\n\
-When enabled, the state of the pipeline after each cycle is displayed.",
-		   &setlist);
-  c = add_show_from_set (c, &showlist);
-
-  c = add_set_cmd ("debugpipeline", class_support, var_zinteger,
-		   (char *) &debug_pipeline_p,
-		   "Set pipeline debug display (simulator only).\n\
-When enabled, debugging information about the pipeline is displayed.",
-		   &setlist);
-  c = add_show_from_set (c, &showlist);
-
-  c = add_set_cmd ("cputimer", class_support, var_zinteger,
-		   (char *) &cpu_timer,
-		   "Set maximum cycle count (simulator only).\n\
-Control will return to gdb if the timer expires.\n\
-A negative value disables the timer.",
-		   &setlist);
-  c = add_show_from_set (c, &showlist);
-
-  tm_print_insn = arc_print_insn;
-}