Merge remote-tracking branch 'mvebu/for-next'

20 files changed, 807 insertions, 465 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 85aafc25a56b..8f1b4bd6b586 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1489,13 +1489,15 @@ M:	Gregory Clement <gregory.clement@free-electrons.com>
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/mach-mvebu/
-F:	drivers/rtc/rtc-armada38x.c
 F:	arch/arm/boot/dts/armada*
 F:	arch/arm/boot/dts/kirkwood*
+F:	arch/arm/configs/mvebu_*_defconfig
+F:	arch/arm/mach-mvebu/
 F:	arch/arm64/boot/dts/marvell/armada*
 F:	drivers/cpufreq/mvebu-cpufreq.c
-F:	arch/arm/configs/mvebu_*_defconfig
+F:	drivers/irqchip/irq-armada-370-xp.c
+F:	drivers/irqchip/irq-mvebu-*
+F:	drivers/rtc/rtc-armada38x.c
 
 ARM/Marvell Berlin SoC support
 M:	Jisheng Zhang <jszhang@marvell.com>
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 02684b698994..ddc7e5d14584 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1004,6 +1004,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
 	armada-385-db-ap.dtb \
 	armada-385-linksys-caiman.dtb \
 	armada-385-linksys-cobra.dtb \
+	armada-385-linksys-rango.dtb \
 	armada-385-linksys-shelby.dtb \
 	armada-385-synology-ds116.dtb \
 	armada-385-turris-omnia.dtb \
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index cc011c8bc36b..5e815ccf72e1 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -137,29 +137,38 @@
 			};
 
 			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
+				compatible = "marvell,armada-370-xp-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
+				compatible = "marvell,armada-370-xp-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
+				compatible = "marvell,armada-370-xp-gpio",
+					     "marvell,orion-gpio";
 				reg = <0x18180 0x40>;
 				ngpios = <2>;
 				gpio-controller;
diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
index f3cee918d285..ee669ae61011 100644
--- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
@@ -44,71 +44,128 @@
 	model = "Linksys WRT1200AC";
 	compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385",
 		     "marvell,armada380";
+};
+
+&expander0 {
+	wan_amber@0 {
+		label = "caiman:amber:wan";
+		reg = <0x0>;
+	};
+
+	wan_white@1 {
+		label = "caiman:white:wan";
+		reg = <0x1>;
+	};
+
+	wlan_2g@2 {
+		label = "caiman:white:wlan_2g";
+		reg = <0x2>;
+	};
+
+	wlan_5g@3 {
+		label = "caiman:white:wlan_5g";
+		reg = <0x3>;
+	};
+
+	usb2@5 {
+		label = "caiman:white:usb2";
+		reg = <0x5>;
+	};
+
+	usb3_1@6 {
+		label = "caiman:white:usb3_1";
+		reg = <0x6>;
+	};
+
+	usb3_2@7 {
+		label = "caiman:white:usb3_2";
+		reg = <0x7>;
+	};
+
+	wps_white@8 {
+		label = "caiman:white:wps";
+		reg = <0x8>;
+	};
+
+	wps_amber@9 {
+		label = "caiman:amber:wps";
+		reg = <0x9>;
+	};
+};
+
+&gpio_leds {
+	power {
+		label = "caiman:white:power";
+	};
+
+	sata {
+		label = "caiman:white:sata";
+	};
+};
+
+&nand {
+	/* 128MiB */
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x200000>;  /* 2MiB */
+		read-only;
+	};
+
+	partition@100000 {
+		label = "u_env";
+		reg = <0x200000 0x40000>;    /* 256KiB */
+	};
+
+	partition@140000 {
+		label = "s_env";
+		reg = <0x240000 0x40000>;    /* 256KiB */
+	};
+
+	partition@900000 {
+		label = "devinfo";
+		reg = <0x900000 0x100000>;   /* 1MiB */
+		read-only;
+	};
+
+	/* kernel1 overlaps with rootfs1 by design */
+	partition@a00000 {
+		label = "kernel1";
+		reg = <0xa00000 0x2800000>;  /* 40MiB */
+	};
+
+	partition@1000000 {
+		label = "rootfs1";
+		reg = <0x1000000 0x2200000>;  /* 34MiB */
+	};
+
+	/* kernel2 overlaps with rootfs2 by design */
+	partition@3200000 {
+		label = "kernel2";
+		reg = <0x3200000 0x2800000>; /* 40MiB */
+	};
+
+	partition@3800000 {
+		label = "rootfs2";
+		reg = <0x3800000 0x2200000>; /* 34MiB */
+	};
+
+	/*
+	 * 38MiB, last MiB is for the BBT, not writable
+	 */
+	partition@5a00000 {
+		label = "syscfg";
+		reg = <0x5a00000 0x2600000>;
+	};
 
-	soc {
-		internal-regs{
-			i2c@11000 {
-
-				pca9635@68 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-					wan_amber@0 {
-						label = "caiman:amber:wan";
-						reg = <0x0>;
-					};
-
-					wan_white@1 {
-						label = "caiman:white:wan";
-						reg = <0x1>;
-					};
-
-					wlan_2g@2 {
-						label = "caiman:white:wlan_2g";
-						reg = <0x2>;
-					};
-
-					wlan_5g@3 {
-						label = "caiman:white:wlan_5g";
-						reg = <0x3>;
-					};
-
-					usb2@5 {
-						label = "caiman:white:usb2";
-						reg = <0x5>;
-					};
-
-					usb3_1@6 {
-						label = "caiman:white:usb3_1";
-						reg = <0x6>;
-					};
-
-					usb3_2@7 {
-						label = "caiman:white:usb3_2";
-						reg = <0x7>;
-					};
-
-					wps_white@8 {
-						label = "caiman:white:wps";
-						reg = <0x8>;
-					};
-
-					wps_amber@9 {
-						label = "caiman:amber:wps";
-						reg = <0x9>;
-					};
-				};
-			};
-		};
-	};
-
-	gpio-leds {
-		power {
-			label = "caiman:white:power";
-		};
-
-		sata {
-			label = "caiman:white:sata";
-		};
+	/*
+	 * Unused area between "s_env" and "devinfo".
+	 * Moved here because otherwise the renumbered
+	 * partitions would break the bootloader
+	 * supplied bootargs
+	 */
+	partition@180000 {
+		label = "unused_area";
+		reg = <0x280000 0x680000>;   /* 6.5MiB */
 	};
 };
diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
index 111071860559..5169ca89c55a 100644
--- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
@@ -44,71 +44,128 @@
 	model = "Linksys WRT1900ACv2";
 	compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385",
 		     "marvell,armada380";
+};
+
+&expander0 {
+	wan_amber@0 {
+		label = "cobra:amber:wan";
+		reg = <0x0>;
+	};
+
+	wan_white@1 {
+		label = "cobra:white:wan";
+		reg = <0x1>;
+	};
+
+	wlan_2g@2 {
+		label = "cobra:white:wlan_2g";
+		reg = <0x2>;
+	};
+
+	wlan_5g@3 {
+		label = "cobra:white:wlan_5g";
+		reg = <0x3>;
+	};
+
+	usb2@5 {
+		label = "cobra:white:usb2";
+		reg = <0x5>;
+	};
+
+	usb3_1@6 {
+		label = "cobra:white:usb3_1";
+		reg = <0x6>;
+	};
+
+	usb3_2@7 {
+		label = "cobra:white:usb3_2";
+		reg = <0x7>;
+	};
+
+	wps_white@8 {
+		label = "cobra:white:wps";
+		reg = <0x8>;
+	};
+
+	wps_amber@9 {
+		label = "cobra:amber:wps";
+		reg = <0x9>;
+	};
+};
+
+&gpio_leds {
+	power {
+		label = "cobra:white:power";
+	};
+
+	sata {
+		label = "cobra:white:sata";
+	};
+};
+
+&nand {
+	/* 128MiB */
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x200000>;  /* 2MiB */
+		read-only;
+	};
+
+	partition@100000 {
+		label = "u_env";
+		reg = <0x200000 0x40000>;    /* 256KiB */
+	};
+
+	partition@140000 {
+		label = "s_env";
+		reg = <0x240000 0x40000>;    /* 256KiB */
+	};
+
+	partition@900000 {
+		label = "devinfo";
+		reg = <0x900000 0x100000>;   /* 1MiB */
+		read-only;
+	};
+
+	/* kernel1 overlaps with rootfs1 by design */
+	partition@a00000 {
+		label = "kernel1";
+		reg = <0xa00000 0x2800000>;  /* 40MiB */
+	};
+
+	partition@1000000 {
+		label = "rootfs1";
+		reg = <0x1000000 0x2200000>;  /* 34MiB */
+	};
+
+	/* kernel2 overlaps with rootfs2 by design */
+	partition@3200000 {
+		label = "kernel2";
+		reg = <0x3200000 0x2800000>; /* 40MiB */
+	};
+
+	partition@3800000 {
+		label = "rootfs2";
+		reg = <0x3800000 0x2200000>; /* 34MiB */
+	};
+
+	/*
+	 * 38MiB, last MiB is for the BBT, not writable
+	 */
+	partition@5a00000 {
+		label = "syscfg";
+		reg = <0x5a00000 0x2600000>;
+	};
 
-	soc {
-		internal-regs{
-			i2c@11000 {
-
-				pca9635@68 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-					wan_amber@0 {
-						label = "cobra:amber:wan";
-						reg = <0x0>;
-					};
-
-					wan_white@1 {
-						label = "cobra:white:wan";
-						reg = <0x1>;
-					};
-
-					wlan_2g@2 {
-						label = "cobra:white:wlan_2g";
-						reg = <0x2>;
-					};
-
-					wlan_5g@3 {
-						label = "cobra:white:wlan_5g";
-						reg = <0x3>;
-					};
-
-					usb2@5 {
-						label = "cobra:white:usb2";
-						reg = <0x5>;
-					};
-
-					usb3_1@6 {
-						label = "cobra:white:usb3_1";
-						reg = <0x6>;
-					};
-
-					usb3_2@7 {
-						label = "cobra:white:usb3_2";
-						reg = <0x7>;
-					};
-
-					wps_white@8 {
-						label = "cobra:white:wps";
-						reg = <0x8>;
-					};
-
-					wps_amber@9 {
-						label = "cobra:amber:wps";
-						reg = <0x9>;
-					};
-				};
-			};
-		};
-	};
-
-	gpio-leds {
-		power {
-			label = "cobra:white:power";
-		};
-
-		sata {
-			label = "cobra:white:sata";
-		};
+	/*
+	 * Unused area between "s_env" and "devinfo".
+	 * Moved here because otherwise the renumbered
+	 * partitions would break the bootloader
+	 * supplied bootargs
+	 */
+	partition@180000 {
+		label = "unused_area";
+		reg = <0x280000 0x680000>;   /* 6.5MiB */
 	};
 };
diff --git a/arch/arm/boot/dts/armada-385-linksys-rango.dts b/arch/arm/boot/dts/armada-385-linksys-rango.dts
new file mode 100644
index 000000000000..da8a0f3d432b
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
@@ -0,0 +1,203 @@
+/*
+ * Device Tree file for the Linksys WRT3200ACM (Rango)
+ *
+ * Copyright (C) 2016 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-385-linksys.dtsi"
+
+/ {
+	model = "Linksys WRT3200ACM";
+	compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
+		     "marvell,armada380";
+};
+
+&expander0 {
+	wan_amber@0 {
+		label = "rango:amber:wan";
+		reg = <0x0>;
+	};
+
+	wan_white@1 {
+		label = "rango:white:wan";
+		reg = <0x1>;
+	};
+
+	usb2@5 {
+		label = "rango:white:usb2";
+		reg = <0x5>;
+	};
+
+	usb3_1@6 {
+		label = "rango:white:usb3_1";
+		reg = <0x6>;
+	};
+
+	usb3_2@7 {
+		label = "rango:white:usb3_2";
+		reg = <0x7>;
+	};
+
+	wps_white@8 {
+		label = "rango:white:wps";
+		reg = <0x8>;
+	};
+
+	wps_amber@9 {
+		label = "rango:amber:wps";
+		reg = <0x9>;
+	};
+};
+
+&gpio_leds {
+	power {
+		gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+		label = "rango:white:power";
+	};
+
+	sata {
+		gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		label = "rango:white:sata";
+	};
+
+	wlan_2g {
+		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		label = "rango:white:wlan_2g";
+	};
+
+	wlan_5g {
+		gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		label = "rango:white:wlan_5g";
+	};
+};
+
+&gpio_leds_pins {
+	marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56";
+};
+
+&nand {
+	/* AMD/Spansion S34ML02G2 256MiB, OEM Layout */
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x200000>;  /* 2MiB */
+		read-only;
+	};
+
+	partition@200000 {
+		label = "u_env";
+		reg = <0x200000 0x20000>;    /* 128KiB */
+	};
+
+	partition@220000 {
+		label = "s_env";
+		reg = <0x220000 0x40000>;    /* 256KiB */
+	};
+
+	partition@7e0000 {
+		label = "devinfo";
+		reg = <0x7e0000 0x40000>;   /* 256KiB */
+		read-only;
+	};
+
+	partition@820000 {
+		label = "sysdiag";
+		reg = <0x820000 0x1e0000>;   /* 1920KiB */
+		read-only;
+	};
+
+	/* kernel1 overlaps with rootfs1 by design */
+	partition@a00000 {
+		label = "kernel1";
+		reg = <0xa00000 0x5000000>;  /* 80MiB */
+	};
+
+	partition@1000000 {
+		label = "rootfs1";
+		reg = <0x1000000 0x4a00000>;  /* 74MiB */
+	};
+
+	/* kernel2 overlaps with rootfs2 by design */
+	partition@5a00000 {
+		label = "kernel2";
+		reg = <0x5a00000 0x5000000>; /* 80MiB */
+	};
+
+	partition@6000000 {
+		label = "rootfs2";
+		reg = <0x6000000 0x4a00000>; /* 74MiB */
+	};
+
+	/*
+	 * 86MiB, last MiB is for the BBT, not writable
+	 */
+	partition@aa00000 {
+		label = "syscfg";
+		reg = <0xaa00000 0x5600000>;
+	};
+
+	/*
+	 * Unused area between "s_env" and "devinfo".
+	 * Moved here because otherwise the renumbered
+	 * partitions would break the bootloader
+	 * supplied bootargs
+	 */
+	partition@180000 {
+		label = "unused_area";
+		reg = <0x260000 0x5c0000>;   /* 5.75MiB */
+	};
+};
+
+&sdhci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhci_pins>;
+	no-1-8-v;
+	non-removable;
+	wp-inverted;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&usb3_1_vbus {
+	gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_1_vbus_pins {
+	marvell,pins = "mpp44";
+};
diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
index c7a8ddd7f9a5..94aa35bc0bff 100644
--- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
@@ -44,71 +44,128 @@
 	model = "Linksys WRT1900ACS";
 	compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
 		     "marvell,armada380";
+};
+
+&expander0 {
+	wan_amber@0 {
+		label = "shelby:amber:wan";
+		reg = <0x0>;
+	};
+
+	wan_white@1 {
+		label = "shelby:white:wan";
+		reg = <0x1>;
+	};
+
+	wlan_2g@2 {
+		label = "shelby:white:wlan_2g";
+		reg = <0x2>;
+	};
+
+	wlan_5g@3 {
+		label = "shelby:white:wlan_5g";
+		reg = <0x3>;
+	};
+
+	usb2@5 {
+		label = "shelby:white:usb2";
+		reg = <0x5>;
+	};
+
+	usb3_1@6 {
+		label = "shelby:white:usb3_1";
+		reg = <0x6>;
+	};
+
+	usb3_2@7 {
+		label = "shelby:white:usb3_2";
+		reg = <0x7>;
+	};
+
+	wps_white@8 {
+		label = "shelby:white:wps";
+		reg = <0x8>;
+	};
+
+	wps_amber@9 {
+		label = "shelby:amber:wps";
+		reg = <0x9>;
+	};
+};
+
+&gpio_leds {
+	power {
+		label = "shelby:white:power";
+	};
+
+	sata {
+		label = "shelby:white:sata";
+	};
+};
+
+&nand {
+	/* 128MiB */
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x200000>;  /* 2MiB */
+		read-only;
+	};
+
+	partition@100000 {
+		label = "u_env";
+		reg = <0x200000 0x40000>;    /* 256KiB */
+	};
+
+	partition@140000 {
+		label = "s_env";
+		reg = <0x240000 0x40000>;    /* 256KiB */
+	};
+
+	partition@900000 {
+		label = "devinfo";
+		reg = <0x900000 0x100000>;   /* 1MiB */
+		read-only;
+	};
+
+	/* kernel1 overlaps with rootfs1 by design */
+	partition@a00000 {
+		label = "kernel1";
+		reg = <0xa00000 0x2800000>;  /* 40MiB */
+	};
+
+	partition@1000000 {
+		label = "rootfs1";
+		reg = <0x1000000 0x2200000>;  /* 34MiB */
+	};
+
+	/* kernel2 overlaps with rootfs2 by design */
+	partition@3200000 {
+		label = "kernel2";
+		reg = <0x3200000 0x2800000>; /* 40MiB */
+	};
+
+	partition@3800000 {
+		label = "rootfs2";
+		reg = <0x3800000 0x2200000>; /* 34MiB */
+	};
+
+	/*
+	 * 38MiB, last MiB is for the BBT, not writable
+	 */
+	partition@5a00000 {
+		label = "syscfg";
+		reg = <0x5a00000 0x2600000>;
+	};
 
-	soc {
-		internal-regs{
-			i2c@11000 {
-
-				pca9635@68 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-					wan_amber@0 {
-						label = "shelby:amber:wan";
-						reg = <0x0>;
-					};
-
-					wan_white@1 {
-						label = "shelby:white:wan";
-						reg = <0x1>;
-					};
-
-					wlan_2g@2 {
-						label = "shelby:white:wlan_2g";
-						reg = <0x2>;
-					};
-
-					wlan_5g@3 {
-						label = "shelby:white:wlan_5g";
-						reg = <0x3>;
-					};
-
-					usb2@5 {
-						label = "shelby:white:usb2";
-						reg = <0x5>;
-					};
-
-					usb3_1@6 {
-						label = "shelby:white:usb3_1";
-						reg = <0x6>;
-					};
-
-					usb3_2@7 {
-						label = "shelby:white:usb3_2";
-						reg = <0x7>;
-					};
-
-					wps_white@8 {
-						label = "shelby:white:wps";
-						reg = <0x8>;
-					};
-
-					wps_amber@9 {
-						label = "shelby:amber:wps";
-						reg = <0x9>;
-					};
-				};
-			};
-		};
-	};
-
-	gpio-leds {
-		power {
-			label = "shelby:white:power";
-		};
-
-		sata {
-			label = "shelby:white:sata";
-		};
+	/*
+	 * Unused area between "s_env" and "devinfo".
+	 * Moved here because otherwise the renumbered
+	 * partitions would break the bootloader
+	 * supplied bootargs
+	 */
+	partition@180000 {
+		label = "unused_area";
+		reg = <0x280000 0x680000>;   /* 6.5MiB */
 	};
 };
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index 2306c45685b1..e1f355ffc8f7 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -52,7 +52,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
+		reg = <0x00000000 0x20000000>; /* 512 MiB */
 	};
 
 	soc {
@@ -61,255 +61,45 @@
 			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
 			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
 			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-
-		internal-regs {
-			i2c@11000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins>;
-				status = "okay";
-
-				tmp421@4c {
-					compatible = "ti,tmp421";
-					reg = <0x4c>;
-				};
-
-				pca9635@68 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "nxp,pca9635";
-					reg = <0x68>;
-				};
-			};
-
-			/* J10: VCC, NC, RX, NC, TX, GND  */
-			serial@12000 {
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <2>;
-				bm,pool-short = <3>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			ethernet@34000 {
-				status = "okay";
-				phy-mode = "sgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <0>;
-				bm,pool-short = <1>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			mdio@72004 {
-				status = "okay";
-
-				switch@0 {
-					compatible = "marvell,mv88e6085";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-							label = "lan4";
-						};
-
-						port@1 {
-							reg = <1>;
-							label = "lan3";
-						};
-
-						port@2 {
-							reg = <2>;
-							label = "lan2";
-						};
-
-						port@3 {
-							reg = <3>;
-							label = "lan1";
-						};
-
-						port@4 {
-							reg = <4>;
-							label = "wan";
-						};
-
-						port@5 {
-							reg = <5>;
-							label = "cpu";
-							ethernet = <&eth2>;
-
-							fixed-link {
-								speed = <1000>;
-								full-duplex;
-							};
-						};
-					};
-				};
-			};
-
-			sata@a8000 {
-				status = "okay";
-			};
-
-			bm@c8000 {
-				status = "okay";
-			};
-
-			/* USB part of the eSATA/USB 2.0 port */
-			usb@58000 {
-				status = "okay";
-			};
-
-			usb3@f8000 {
-				status = "okay";
-				usb-phy = <&usb3_phy>;
-			};
-
-			flash@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0x200000>;  /* 2MB */
-					read-only;
-				};
-
-				partition@100000 {
-					label = "u_env";
-					reg = <0x200000 0x40000>;    /* 256KB */
-				};
-
-				partition@140000 {
-					label = "s_env";
-					reg = <0x240000 0x40000>;    /* 256KB */
-				};
-
-				partition@900000 {
-					label = "devinfo";
-					reg = <0x900000 0x100000>;   /* 1MB */
-					read-only;
-				};
-
-				/* kernel1 overlaps with rootfs1 by design */
-				partition@a00000 {
-					label = "kernel1";
-					reg = <0xa00000 0x2800000>;  /* 40MB */
-				};
-
-				partition@1000000 {
-					label = "rootfs1";
-					reg = <0x1000000 0x2200000>;  /* 34MB */
-				};
-
-				/* kernel2 overlaps with rootfs2 by design */
-				partition@3200000 {
-					label = "kernel2";
-					reg = <0x3200000 0x2800000>; /* 40MB */
-				};
-
-				partition@3800000 {
-					label = "rootfs2";
-					reg = <0x3800000 0x2200000>; /* 34MB */
-				};
-
-				/*
-				 * 38MB, last MB is for the BBT, not writable
-				 */
-				partition@5a00000 {
-					label = "syscfg";
-					reg = <0x5a00000 0x2600000>;
-				};
-
-				/*
-				 * Unused area between "s_env" and "devinfo".
-				 * Moved here because otherwise the renumbered
-				 * partitions would break the bootloader
-				 * supplied bootargs
-				 */
-				partition@180000 {
-					label = "unused_area";
-					reg = <0x280000 0x680000>;   /* 6.5MB */
-				};
-			};
-		};
-
-		bm-bppi {
-			status = "okay";
-		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				/* Marvell 88W8864, 5GHz-only */
-				status = "okay";
-			};
-
-			pcie@2,0 {
-				/* Marvell 88W8864, 2GHz-only */
-				status = "okay";
-			};
-		};
 	};
 
-	usb3_phy: usb3_phy {
+	usb3_1_phy: usb3_1-phy {
 		compatible = "usb-nop-xceiv";
-		vcc-supply = <&reg_xhci0_vbus>;
+		vcc-supply = <&usb3_1_vbus>;
 	};
 
-	reg_xhci0_vbus: xhci0-vbus {
+	usb3_1_vbus: usb3_1-vbus {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
-		pinctrl-0 = <&xhci0_vbus_pins>;
-		regulator-name = "xhci0-vbus";
+		pinctrl-0 = <&usb3_1_vbus_pins>;
+		regulator-name = "usb3_1-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		enable-active-high;
 		gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
 	};
 
-	gpio_keys {
+	gpio_keys: gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&keys_pin>;
+		pinctrl-0 = <&gpio_keys_pins>;
 		pinctrl-names = "default";
 
-		button@1 {
+		wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
 		};
 
-		button@2 {
+		reset {
 			label = "Factory Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 		};
 	};
 
-	gpio-leds {
+	gpio_leds: gpio-leds {
 		compatible = "gpio-leds";
-		pinctrl-0 = <&power_led_pin &sata_led_pin>;
+		pinctrl-0 = <&gpio_leds_pins>;
 		pinctrl-names = "default";
 
 		power {
@@ -323,21 +113,83 @@
 			linux,default-trigger = "disk-activity";
 		};
 	};
+};
 
-	dsa@0 {
-		status = "disabled";
+&ahci0 {
+	status = "okay";
+};
+
+&bm {
+	status = "okay";
+};
 
-		compatible = "marvell,dsa";
-		#address-cells = <2>;
+&bm_bppi {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&eth2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	buffer-manager = <&bm>;
+	bm,pool-long = <2>;
+	bm,pool-short = <3>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+
+	expander0: pca9635@68 {
+		#address-cells = <1>;
 		#size-cells = <0>;
+		compatible = "nxp,pca9635";
+		reg = <0x68>;
+	};
+};
+
+&nand {
+	/* 128MiB or 256MiB */
+	status = "okay";
+	num-cs = <1>;
+	marvell,nand-keep-config;
+	marvell,nand-enable-arbiter;
+	nand-on-flash-bbt;
+};
 
-		dsa,ethernet = <&eth2>;
-		dsa,mii-bus = <&mdio>;
+&mdio {
+	status = "okay";
 
-		switch@0 {
+	switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0x0 0>;	/* MDIO address 0, switch 0 in tree */
 
 			port@0 {
 				reg = <0>;
@@ -367,28 +219,45 @@
 			port@5 {
 				reg = <5>;
 				label = "cpu";
+				ethernet = <&eth2>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
 			};
 		};
 	};
 };
 
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	/* Marvell 88W8864, 5GHz-only */
+	status = "okay";
+};
+
+&pcie2 {
+	/* Marvell 88W8864, 2GHz-only */
+	status = "okay";
+};
+
 &pinctrl {
-	keys_pin: keys-pin {
+	gpio_keys_pins: gpio-keys-pins {
+		/* mpp24: wps, mpp29: reset */
 		marvell,pins = "mpp24", "mpp29";
 		marvell,function = "gpio";
 	};
 
-	power_led_pin: power-led-pin {
-		marvell,pins = "mpp55";
-		marvell,function = "gpio";
-	};
-
-	sata_led_pin: sata-led-pin {
-		marvell,pins = "mpp54";
+	gpio_leds_pins: gpio-leds-pins {
+		/* mpp54: sata, mpp55: power */
+		marvell,pins = "mpp54", "mpp55";
 		marvell,function = "gpio";
 	};
 
-	xhci0_vbus_pins: xhci0-vbus-pins {
+	usb3_1_vbus_pins: usb3_1-vbus-pins {
 		marvell,pins = "mpp50";
 		marvell,function = "gpio";
 	};
@@ -397,3 +266,18 @@
 &spi0 {
 	status = "disabled";
 };
+
+&uart0 {
+	/* J10: VCC, NC, RX, NC, TX, GND  */
+	status = "okay";
+};
+
+&usb0 {
+	/* USB part of the eSATA/USB 2.0 port */
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+	usb-phy = <&usb3_1_phy>;
+};
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
index 84cc232a29e9..be22ec5236ac 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -311,6 +311,10 @@
 	reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 };
 
+&rtc {
+	status = "disabled";
+};
+
 &timer {
 	compatible = "marvell,armada-xp-timer";
 	clocks = <&coreclk 2>, <&refclk>;
diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
index 51de91b31a9d..bc9f824020eb 100644
--- a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
@@ -87,4 +87,5 @@
 
 &pp0 {
 	compatible = "marvell,prestera-98dx4251";
+	interrupts = <33>, <34>, <35>, <36>;
 };
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 9efcf59c9b44..6d705f518254 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -308,13 +308,11 @@
 		};
 	};
 
-	gpio_fan {
+	pwm_fan {
 		/* SUNON HA4010V4-0000-C99 */
-		compatible = "gpio-fan";
-		gpios = <&gpio0 24 0>;
 
-		gpio-fan,speed-map = <0    0
-				      4500 1>;
+		compatible = "pwm-fan";
+		pwms = <&gpio0 24 4000>;
 	};
 
 	dsa {
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 07c5090ecd29..f77168c9add4 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -202,25 +202,33 @@
 
 		internal-regs {
 			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
+				compatible = "marvell,armada-370-xp-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
+				compatible = "marvell,armada-370-xp-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <17>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <87>, <88>, <89>;
+				clocks = <&coreclk 0>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 64e936ae7b22..0ecfaf49d239 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -285,29 +285,38 @@
 
 		internal-regs {
 			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
+				compatible = "marvell,armada-370-xp-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
+				compatible = "marvell,armada-370-xp-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
+				compatible = "marvell,armada-370-xp-gpio",
+					     "marvell,orion-gpio";
 				reg = <0x18180 0x40>;
 				ngpios = <3>;
 				gpio-controller;
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index d1383dde43eb..670ece4c6fa7 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -323,29 +323,38 @@
 
 		internal-regs {
 			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
+				compatible = "marvell,armada-370-xp-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
+				compatible = "marvell,armada-370-xp-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
+				compatible = "marvell,armada-370-xp-gpio",
+					     "marvell,orion-gpio";
 				reg = <0x18180 0x40>;
 				ngpios = <3>;
 				gpio-controller;
diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig
index f1a0e2503cbe..69553704f2dc 100644
--- a/arch/arm/configs/mvebu_v7_defconfig
+++ b/arch/arm/configs/mvebu_v7_defconfig
@@ -135,6 +135,8 @@ CONFIG_DMADEVICES=y
 CONFIG_MV_XOR=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_MEMORY=y
+CONFIG_PWM=y
+CONFIG_SENSORS_PWM_FAN=y
 CONFIG_EXT4_FS=y
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index dc0d084005b2..3cde649f96e4 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -169,6 +169,22 @@
 	status = "okay";
 };
 
+&cps_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cps_ethernet {
+	status = "okay";
+};
+
+&cps_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
 &ap_sdhci0 {
 	status = "okay";
 	bus-width = <4>;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index f7bb0cc03147..100861aa7afd 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -95,6 +95,21 @@
 	status = "okay";
 };
 
+&ap_sdhci0 {
+	bus-width = <8>;
+	/*
+	 * Not stable in HS modes - phy needs "more calibration", so add
+	 * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
+	 */
+	marvell,xenon-phy-slow-mode;
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+	vqmmc-supply = <&v_vddo_h>;
+};
+
 &cpm_i2c0 {
 	clock-frequency = <100000>;
 	status = "okay";
@@ -105,6 +120,14 @@
 	status = "okay";
 };
 
+&cpm_sdhci0 {
+	/* U6 */
+	broken-cd;
+	bus-width = <4>;
+	status = "okay";
+	vqmmc-supply = <&v_3_3>;
+};
+
 &cpm_usb3_0 {
 	/* J38? - USB2.0 only */
 	status = "okay";
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index fe41bf9c301e..9b9e36a627d8 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -159,6 +159,7 @@
 				reg = <0x400000 0x1000>,
 				      <0x410000 0x1000>;
 				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_syscon 3>;
 				dma-coherent;
 			};
 
@@ -167,6 +168,7 @@
 				reg = <0x420000 0x1000>,
 				      <0x430000 0x1000>;
 				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_syscon 3>;
 				dma-coherent;
 			};
 
@@ -175,6 +177,7 @@
 				reg = <0x440000 0x1000>,
 				      <0x450000 0x1000>;
 				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_syscon 3>;
 				dma-coherent;
 			};
 
@@ -183,6 +186,7 @@
 				reg = <0x460000 0x1000>,
 				      <0x470000 0x1000>;
 				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_syscon 3>;
 				dma-coherent;
 			};
 
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index ac8df5201cd6..b4bc42ece754 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -231,8 +231,7 @@
 			cpm_crypto: crypto@800000 {
 				compatible = "inside-secure,safexcel-eip197";
 				reg = <0x800000 0x200000>;
-				interrupts = <GIC_SPI 34 (IRQ_TYPE_EDGE_RISING
-				| IRQ_TYPE_LEVEL_HIGH)>,
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index 7740a75a8230..6e2058847ddc 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -221,8 +221,7 @@
 			cps_crypto: crypto@800000 {
 				compatible = "inside-secure,safexcel-eip197";
 				reg = <0x800000 0x200000>;
-				interrupts = <GIC_SPI 34 (IRQ_TYPE_EDGE_RISING
-				| IRQ_TYPE_LEVEL_HIGH)>,
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,