Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull more networking fixes from David Miller:

 1) Fix brcmfmac build with older gcc, from Arend van Spriel.

 2) IRQ values unintentionally truncated to u8 in mlx5 driver, from
    Doron Tsur.

 3) Fix build warnings wrt tcp cgroup changes, from Geert Uytterhoeven.

 4) Limit deep recursion in ovs stack, from Hannes Frederic Sowa.

 5) at803x phy driver bug fixes from, Martin Blumenstingl.

 6) Fix TSO handling in hns driver, from Daode Huang

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits)
  ovs: limit ovs recursions in ovs_execute_actions to not corrupt stack
  team: Replace rcu_read_lock with a mutex in team_vlan_rx_kill_vid
  net: hns: bug fix about hisilicon TSO BD mode
  brcmfmac: fix BRCMF_FW_NVRAM_DEF macro for older gcc compilers
  net: phy: at803x: Add the interrupt register bit definitions
  net: phy: at803x: Clean up duplicate register definitions
  net: phy: at803x: Allow specifying the RGMII RX clock delay via phy mode
  net: phy: at803x: Don't set gbit features for the AR8030 phy
  arm64: bpf: add extra pass to handle faulty codegen
  arm64: insn: remove BUG_ON from codegen
  sctp: the temp asoc's transports should not be hashed/unhashed
  net/mlx5_core: Fix trimming down IRQ number
  tcp_memcontrol: Forward declare cgroup_subsys and mem_cgroup stucts
  batman-adv: Drop immediate orig_node free function
  batman-adv: Drop immediate batadv_hard_iface free function
  batman-adv: Drop immediate neigh_ifinfo free function
  batman-adv: Drop immediate batadv_hardif_neigh_node free function
  batman-adv: Drop immediate batadv_neigh_node free function
  batman-adv: Drop immediate batadv_orig_ifinfo free function
  batman-adv: Avoid recursive call_rcu for batadv_nc_node
  ...

1 files changed, 86 insertions, 24 deletions

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 8a8f6fb2880d..2174ec937b4d 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -20,10 +20,21 @@
 #include <linux/gpio/consumer.h>
 
 #define AT803X_INTR_ENABLE			0x12
+#define AT803X_INTR_ENABLE_AUTONEG_ERR		BIT(15)
+#define AT803X_INTR_ENABLE_SPEED_CHANGED	BIT(14)
+#define AT803X_INTR_ENABLE_DUPLEX_CHANGED	BIT(13)
+#define AT803X_INTR_ENABLE_PAGE_RECEIVED	BIT(12)
+#define AT803X_INTR_ENABLE_LINK_FAIL		BIT(11)
+#define AT803X_INTR_ENABLE_LINK_SUCCESS		BIT(10)
+#define AT803X_INTR_ENABLE_WIRESPEED_DOWNGRADE	BIT(5)
+#define AT803X_INTR_ENABLE_POLARITY_CHANGED	BIT(1)
+#define AT803X_INTR_ENABLE_WOL			BIT(0)
+
 #define AT803X_INTR_STATUS			0x13
+
 #define AT803X_SMART_SPEED			0x14
 #define AT803X_LED_CONTROL			0x18
-#define AT803X_WOL_ENABLE			0x01
+
 #define AT803X_DEVICE_ADDR			0x03
 #define AT803X_LOC_MAC_ADDR_0_15_OFFSET		0x804C
 #define AT803X_LOC_MAC_ADDR_16_31_OFFSET	0x804B
@@ -31,13 +42,15 @@
 #define AT803X_MMD_ACCESS_CONTROL		0x0D
 #define AT803X_MMD_ACCESS_CONTROL_DATA		0x0E
 #define AT803X_FUNC_DATA			0x4003
-#define AT803X_INER				0x0012
-#define AT803X_INER_INIT			0xec00
-#define AT803X_INSR				0x0013
+
 #define AT803X_DEBUG_ADDR			0x1D
 #define AT803X_DEBUG_DATA			0x1E
-#define AT803X_DEBUG_SYSTEM_MODE_CTRL		0x05
-#define AT803X_DEBUG_RGMII_TX_CLK_DLY		BIT(8)
+
+#define AT803X_DEBUG_REG_0			0x00
+#define AT803X_DEBUG_RX_CLK_DLY_EN		BIT(15)
+
+#define AT803X_DEBUG_REG_5			0x05
+#define AT803X_DEBUG_TX_CLK_DLY_EN		BIT(8)
 
 #define ATH8030_PHY_ID 0x004dd076
 #define ATH8031_PHY_ID 0x004dd074
@@ -61,6 +74,46 @@ struct at803x_context {
 	u16 led_control;
 };
 
+static int at803x_debug_reg_read(struct phy_device *phydev, u16 reg)
+{
+	int ret;
+
+	ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg);
+	if (ret < 0)
+		return ret;
+
+	return phy_read(phydev, AT803X_DEBUG_DATA);
+}
+
+static int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg,
+				 u16 clear, u16 set)
+{
+	u16 val;
+	int ret;
+
+	ret = at803x_debug_reg_read(phydev, reg);
+	if (ret < 0)
+		return ret;
+
+	val = ret & 0xffff;
+	val &= ~clear;
+	val |= set;
+
+	return phy_write(phydev, AT803X_DEBUG_DATA, val);
+}
+
+static inline int at803x_enable_rx_delay(struct phy_device *phydev)
+{
+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0,
+					AT803X_DEBUG_RX_CLK_DLY_EN);
+}
+
+static inline int at803x_enable_tx_delay(struct phy_device *phydev)
+{
+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
+					AT803X_DEBUG_TX_CLK_DLY_EN);
+}
+
 /* save relevant PHY registers to private copy */
 static void at803x_context_save(struct phy_device *phydev,
 				struct at803x_context *context)
@@ -119,14 +172,14 @@ static int at803x_set_wol(struct phy_device *phydev,
 		}
 
 		value = phy_read(phydev, AT803X_INTR_ENABLE);
-		value |= AT803X_WOL_ENABLE;
+		value |= AT803X_INTR_ENABLE_WOL;
 		ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
 		if (ret)
 			return ret;
 		value = phy_read(phydev, AT803X_INTR_STATUS);
 	} else {
 		value = phy_read(phydev, AT803X_INTR_ENABLE);
-		value &= (~AT803X_WOL_ENABLE);
+		value &= (~AT803X_INTR_ENABLE_WOL);
 		ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
 		if (ret)
 			return ret;
@@ -145,7 +198,7 @@ static void at803x_get_wol(struct phy_device *phydev,
 	wol->wolopts = 0;
 
 	value = phy_read(phydev, AT803X_INTR_ENABLE);
-	if (value & AT803X_WOL_ENABLE)
+	if (value & AT803X_INTR_ENABLE_WOL)
 		wol->wolopts |= WAKE_MAGIC;
 }
 
@@ -157,7 +210,7 @@ static int at803x_suspend(struct phy_device *phydev)
 	mutex_lock(&phydev->lock);
 
 	value = phy_read(phydev, AT803X_INTR_ENABLE);
-	wol_enabled = value & AT803X_WOL_ENABLE;
+	wol_enabled = value & AT803X_INTR_ENABLE_WOL;
 
 	value = phy_read(phydev, MII_BMCR);
 
@@ -217,14 +270,17 @@ static int at803x_config_init(struct phy_device *phydev)
 	if (ret < 0)
 		return ret;
 
-	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
-		ret = phy_write(phydev, AT803X_DEBUG_ADDR,
-				AT803X_DEBUG_SYSTEM_MODE_CTRL);
-		if (ret)
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID ||
+			phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
+		ret = at803x_enable_rx_delay(phydev);
+		if (ret < 0)
 			return ret;
-		ret = phy_write(phydev, AT803X_DEBUG_DATA,
-				AT803X_DEBUG_RGMII_TX_CLK_DLY);
-		if (ret)
+	}
+
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID ||
+			phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
+		ret = at803x_enable_tx_delay(phydev);
+		if (ret < 0)
 			return ret;
 	}
 
@@ -235,7 +291,7 @@ static int at803x_ack_interrupt(struct phy_device *phydev)
 {
 	int err;
 
-	err = phy_read(phydev, AT803X_INSR);
+	err = phy_read(phydev, AT803X_INTR_STATUS);
 
 	return (err < 0) ? err : 0;
 }
@@ -245,13 +301,19 @@ static int at803x_config_intr(struct phy_device *phydev)
 	int err;
 	int value;
 
-	value = phy_read(phydev, AT803X_INER);
+	value = phy_read(phydev, AT803X_INTR_ENABLE);
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		value |= AT803X_INTR_ENABLE_AUTONEG_ERR;
+		value |= AT803X_INTR_ENABLE_SPEED_CHANGED;
+		value |= AT803X_INTR_ENABLE_DUPLEX_CHANGED;
+		value |= AT803X_INTR_ENABLE_LINK_FAIL;
+		value |= AT803X_INTR_ENABLE_LINK_SUCCESS;
 
-	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
-		err = phy_write(phydev, AT803X_INER,
-				value | AT803X_INER_INIT);
+		err = phy_write(phydev, AT803X_INTR_ENABLE, value);
+	}
 	else
-		err = phy_write(phydev, AT803X_INER, 0);
+		err = phy_write(phydev, AT803X_INTR_ENABLE, 0);
 
 	return err;
 }
@@ -322,7 +384,7 @@ static struct phy_driver at803x_driver[] = {
 	.get_wol		= at803x_get_wol,
 	.suspend		= at803x_suspend,
 	.resume			= at803x_resume,
-	.features		= PHY_GBIT_FEATURES,
+	.features		= PHY_BASIC_FEATURES,
 	.flags			= PHY_HAS_INTERRUPT,
 	.config_aneg		= genphy_config_aneg,
 	.read_status		= genphy_read_status,