aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/dma/qcom/qcom_adm.c56
-rw-r--r--drivers/mtd/nand/raw/qcom_nandc.c14
-rw-r--r--drivers/tty/serial/msm_serial.c15
-rw-r--r--include/linux/dma/qcom_adm.h12
4 files changed, 86 insertions, 11 deletions
diff --git a/drivers/dma/qcom/qcom_adm.c b/drivers/dma/qcom/qcom_adm.c
index ee78bed8d60d..facdacf8aede 100644
--- a/drivers/dma/qcom/qcom_adm.c
+++ b/drivers/dma/qcom/qcom_adm.c
@@ -8,6 +8,7 @@
#include <linux/device.h>
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
+#include <linux/dma/qcom_adm.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -140,6 +141,8 @@ struct adm_chan {
struct adm_async_desc *curr_txd;
struct dma_slave_config slave;
+ u32 crci;
+ u32 mux;
struct list_head node;
int error;
@@ -379,8 +382,8 @@ static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
return ERR_PTR(-EINVAL);
}
- crci = achan->slave.slave_id & 0xf;
- if (!crci || achan->slave.slave_id > 0x1f) {
+ crci = achan->crci & 0xf;
+ if (!crci || achan->crci > 0x1f) {
dev_err(adev->dev, "invalid crci value\n");
return ERR_PTR(-EINVAL);
}
@@ -403,9 +406,7 @@ static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
if (!async_desc)
return ERR_PTR(-ENOMEM);
- if (crci)
- async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ?
- ADM_CRCI_CTL_MUX_SEL : 0;
+ async_desc->mux = achan->mux ? ADM_CRCI_CTL_MUX_SEL : 0;
async_desc->crci = crci;
async_desc->blk_size = blk_size;
async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) +
@@ -488,10 +489,13 @@ static int adm_terminate_all(struct dma_chan *chan)
static int adm_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
{
struct adm_chan *achan = to_adm_chan(chan);
+ struct qcom_adm_peripheral_config *config = cfg->peripheral_config;
unsigned long flag;
spin_lock_irqsave(&achan->vc.lock, flag);
memcpy(&achan->slave, cfg, sizeof(struct dma_slave_config));
+ if (cfg->peripheral_size == sizeof(config))
+ achan->crci = config->crci;
spin_unlock_irqrestore(&achan->vc.lock, flag);
return 0;
@@ -694,6 +698,45 @@ static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan,
achan->vc.desc_free = adm_dma_free_desc;
}
+/**
+ * adm_dma_xlate
+ * @dma_spec: pointer to DMA specifier as found in the device tree
+ * @ofdma: pointer to DMA controller data
+ *
+ * This can use either 1-cell or 2-cell formats, the first cell
+ * identifies the slave device, while the optional second cell
+ * contains the crci value.
+ *
+ * Returns pointer to appropriate dma channel on success or NULL on error.
+ */
+static struct dma_chan *adm_dma_xlate(struct of_phandle_args *dma_spec,
+ struct of_dma *ofdma)
+{
+ struct dma_device *dev = ofdma->of_dma_data;
+ struct dma_chan *chan, *candidate = NULL;
+ struct adm_chan *achan;
+
+ if (!dev || dma_spec->args_count > 2)
+ return NULL;
+
+ list_for_each_entry(chan, &dev->channels, device_node)
+ if (chan->chan_id == dma_spec->args[0]) {
+ candidate = chan;
+ break;
+ }
+
+ if (!candidate)
+ return NULL;
+
+ achan = to_adm_chan(candidate);
+ if (dma_spec->args_count == 2)
+ achan->crci = dma_spec->args[1];
+ else
+ achan->crci = 0;
+
+ return dma_get_slave_channel(candidate);
+}
+
static int adm_dma_probe(struct platform_device *pdev)
{
struct adm_device *adev;
@@ -838,8 +881,7 @@ static int adm_dma_probe(struct platform_device *pdev)
goto err_disable_clks;
}
- ret = of_dma_controller_register(pdev->dev.of_node,
- of_dma_xlate_by_chan_id,
+ ret = of_dma_controller_register(pdev->dev.of_node, adm_dma_xlate,
&adev->common);
if (ret)
goto err_unregister_dma;
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 04e6f7b26706..7c6efa3b6255 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -6,6 +6,7 @@
#include <linux/clk.h>
#include <linux/slab.h>
#include <linux/bitops.h>
+#include <linux/dma/qcom_adm.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/module.h>
@@ -952,6 +953,7 @@ static int prep_adm_dma_desc(struct qcom_nand_controller *nandc, bool read,
struct dma_async_tx_descriptor *dma_desc;
struct scatterlist *sgl;
struct dma_slave_config slave_conf;
+ struct qcom_adm_peripheral_config periph_conf = {};
enum dma_transfer_direction dir_eng;
int ret;
@@ -983,11 +985,19 @@ static int prep_adm_dma_desc(struct qcom_nand_controller *nandc, bool read,
if (read) {
slave_conf.src_maxburst = 16;
slave_conf.src_addr = nandc->base_dma + reg_off;
- slave_conf.slave_id = nandc->data_crci;
+ if (nandc->data_crci) {
+ periph_conf.crci = nandc->data_crci;
+ slave_conf.peripheral_config = &periph_conf;
+ slave_conf.peripheral_size = sizeof(periph_conf);
+ }
} else {
slave_conf.dst_maxburst = 16;
slave_conf.dst_addr = nandc->base_dma + reg_off;
- slave_conf.slave_id = nandc->cmd_crci;
+ if (nandc->cmd_crci) {
+ periph_conf.crci = nandc->cmd_crci;
+ slave_conf.peripheral_config = &periph_conf;
+ slave_conf.peripheral_size = sizeof(periph_conf);
+ }
}
ret = dmaengine_slave_config(nandc->chan, &slave_conf);
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index fcef7a961430..c6be09f44dc1 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -9,6 +9,7 @@
#include <linux/kernel.h>
#include <linux/atomic.h>
+#include <linux/dma/qcom_adm.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/module.h>
@@ -290,6 +291,7 @@ static void msm_request_tx_dma(struct msm_port *msm_port, resource_size_t base)
{
struct device *dev = msm_port->uart.dev;
struct dma_slave_config conf;
+ struct qcom_adm_peripheral_config periph_conf = {};
struct msm_dma *dma;
u32 crci = 0;
int ret;
@@ -308,7 +310,11 @@ static void msm_request_tx_dma(struct msm_port *msm_port, resource_size_t base)
conf.device_fc = true;
conf.dst_addr = base + UARTDM_TF;
conf.dst_maxburst = UARTDM_BURST_SIZE;
- conf.slave_id = crci;
+ if (crci) {
+ conf.peripheral_config = &periph_conf;
+ conf.peripheral_size = sizeof(periph_conf);
+ periph_conf.crci = crci;
+ }
ret = dmaengine_slave_config(dma->chan, &conf);
if (ret)
@@ -333,6 +339,7 @@ static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base)
{
struct device *dev = msm_port->uart.dev;
struct dma_slave_config conf;
+ struct qcom_adm_peripheral_config periph_conf = {};
struct msm_dma *dma;
u32 crci = 0;
int ret;
@@ -355,7 +362,11 @@ static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base)
conf.device_fc = true;
conf.src_addr = base + UARTDM_RF;
conf.src_maxburst = UARTDM_BURST_SIZE;
- conf.slave_id = crci;
+ if (crci) {
+ conf.peripheral_config = &periph_conf;
+ conf.peripheral_size = sizeof(periph_conf);
+ periph_conf.crci = crci;
+ }
ret = dmaengine_slave_config(dma->chan, &conf);
if (ret)
diff --git a/include/linux/dma/qcom_adm.h b/include/linux/dma/qcom_adm.h
new file mode 100644
index 000000000000..af20df674f0c
--- /dev/null
+++ b/include/linux/dma/qcom_adm.h
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#ifndef __LINUX_DMA_QCOM_ADM_H
+#define __LINUX_DMA_QCOM_ADM_H
+
+#include <linux/types.h>
+
+struct qcom_adm_peripheral_config {
+ u32 crci;
+ u32 mux;
+};
+
+#endif /* __LINUX_DMA_QCOM_ADM_H */
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-16 14:48:00 +0000