aboutsummaryrefslogtreecommitdiff
path: root/virt
AgeCommit message (Collapse)Author
2022-06-09KVM: x86: disable preemption around the call to kvm_arch_vcpu_{un|}blockingMaxim Levitsky
On SVM, if preemption happens right after the call to finish_rcuwait but before call to kvm_arch_vcpu_unblocking on SVM/AVIC, it itself will re-enable AVIC, and then we will try to re-enable it again in kvm_arch_vcpu_unblocking which will lead to a warning in __avic_vcpu_load. The same problem can happen if the vCPU is preempted right after the call to kvm_arch_vcpu_blocking but before the call to prepare_to_rcuwait and in this case, we will end up with AVIC enabled during sleep - Ooops. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20220606180829.102503-7-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-09Merge tag 'kvm-riscv-fixes-5.19-1' of https://github.com/kvm-riscv/linux ↵Paolo Bonzini
into HEAD KVM/riscv fixes for 5.19, take #1 - Typo fix in arch/riscv/kvm/vmid.c - Remove broken reference pattern from MAINTAINERS entry
2022-06-07KVM: Don't null dereference ops->destroyAlexey Kardashevskiy
A KVM device cleanup happens in either of two callbacks: 1) destroy() which is called when the VM is being destroyed; 2) release() which is called when a device fd is closed. Most KVM devices use 1) but Book3s's interrupt controller KVM devices (XICS, XIVE, XIVE-native) use 2) as they need to close and reopen during the machine execution. The error handling in kvm_ioctl_create_device() assumes destroy() is always defined which leads to NULL dereference as discovered by Syzkaller. This adds a checks for destroy!=NULL and adds a missing release(). This is not changing kvm_destroy_devices() as devices with defined release() should have been removed from the KVM devices list by then. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-01Merge tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull vfio updates from Alex Williamson: - Improvements to mlx5 vfio-pci variant driver, including support for parallel migration per PF (Yishai Hadas) - Remove redundant iommu_present() check (Robin Murphy) - Ongoing refactoring to consolidate the VFIO driver facing API to use vfio_device (Jason Gunthorpe) - Use drvdata to store vfio_device among all vfio-pci and variant drivers (Jason Gunthorpe) - Remove redundant code now that IOMMU core manages group DMA ownership (Jason Gunthorpe) - Remove vfio_group from external API handling struct file ownership (Jason Gunthorpe) - Correct typo in uapi comments (Thomas Huth) - Fix coccicheck detected deadlock (Wan Jiabing) - Use rwsem to remove races and simplify code around container and kvm association to groups (Jason Gunthorpe) - Harden access to devices in low power states and use runtime PM to enable d3cold support for unused devices (Abhishek Sahu) - Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe) - Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe) - Pass KVM pointer directly rather than via notifier (Matthew Rosato) * tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio: (38 commits) vfio: remove VFIO_GROUP_NOTIFY_SET_KVM vfio/pci: Add driver_managed_dma to the new vfio_pci drivers vfio: Do not manipulate iommu dma_owner for fake iommu groups vfio/pci: Move the unused device into low power state with runtime PM vfio/pci: Virtualize PME related registers bits and initialize to zero vfio/pci: Change the PF power state to D0 before enabling VFs vfio/pci: Invalidate mmaps and block the access in D3hot power state vfio: Change struct vfio_group::container_users to a non-atomic int vfio: Simplify the life cycle of the group FD vfio: Fully lock struct vfio_group::container vfio: Split up vfio_group_get_device_fd() vfio: Change struct vfio_group::opened from an atomic to bool vfio: Add missing locking for struct vfio_group::kvm kvm/vfio: Fix potential deadlock problem in vfio include/uapi/linux/vfio.h: Fix trivial typo - _IORW should be _IOWR instead vfio/pci: Use the struct file as the handle not the vfio_group kvm/vfio: Remove vfio_group from kvm vfio: Change vfio_group_set_kvm() to vfio_file_set_kvm() vfio: Change vfio_external_check_extension() to vfio_file_enforced_coherent() vfio: Remove vfio_external_group_match_file() ...
2022-05-26Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm updates from Paolo Bonzini: "S390: - ultravisor communication device driver - fix TEID on terminating storage key ops RISC-V: - Added Sv57x4 support for G-stage page table - Added range based local HFENCE functions - Added remote HFENCE functions based on VCPU requests - Added ISA extension registers in ONE_REG interface - Updated KVM RISC-V maintainers entry to cover selftests support ARM: - Add support for the ARMv8.6 WFxT extension - Guard pages for the EL2 stacks - Trap and emulate AArch32 ID registers to hide unsupported features - Ability to select and save/restore the set of hypercalls exposed to the guest - Support for PSCI-initiated suspend in collaboration with userspace - GICv3 register-based LPI invalidation support - Move host PMU event merging into the vcpu data structure - GICv3 ITS save/restore fixes - The usual set of small-scale cleanups and fixes x86: - New ioctls to get/set TSC frequency for a whole VM - Allow userspace to opt out of hypercall patching - Only do MSR filtering for MSRs accessed by rdmsr/wrmsr AMD SEV improvements: - Add KVM_EXIT_SHUTDOWN metadata for SEV-ES - V_TSC_AUX support Nested virtualization improvements for AMD: - Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE, nested vGIF) - Allow AVIC to co-exist with a nested guest running - Fixes for LBR virtualizations when a nested guest is running, and nested LBR virtualization support - PAUSE filtering for nested hypervisors Guest support: - Decoupling of vcpu_is_preempted from PV spinlocks" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits) KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest KVM: selftests: x86: Sync the new name of the test case to .gitignore Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND x86, kvm: use correct GFP flags for preemption disabled KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer x86/kvm: Alloc dummy async #PF token outside of raw spinlock KVM: x86: avoid calling x86 emulator without a decoded instruction KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave) s390/uv_uapi: depend on CONFIG_S390 KVM: selftests: x86: Fix test failure on arch lbr capable platforms KVM: LAPIC: Trace LAPIC timer expiration on every vmentry KVM: s390: selftest: Test suppression indication on key prot exception KVM: s390: Don't indicate suppression on dirtying, failing memop selftests: drivers/s390x: Add uvdevice tests drivers/s390/char: Add Ultravisor io device MAINTAINERS: Update KVM RISC-V entry to cover selftests support RISC-V: KVM: Introduce ISA extension register RISC-V: KVM: Cleanup stale TLB entries when host CPU changes RISC-V: KVM: Add remote HFENCE functions based on VCPU requests ...
2022-05-25Merge tag 'kvmarm-5.19' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for 5.19 - Add support for the ARMv8.6 WFxT extension - Guard pages for the EL2 stacks - Trap and emulate AArch32 ID registers to hide unsupported features - Ability to select and save/restore the set of hypercalls exposed to the guest - Support for PSCI-initiated suspend in collaboration with userspace - GICv3 register-based LPI invalidation support - Move host PMU event merging into the vcpu data structure - GICv3 ITS save/restore fixes - The usual set of small-scale cleanups and fixes [Due to the conflict, KVM_SYSTEM_EVENT_SEV_TERM is relocated from 4 to 6. - Paolo]
2022-05-20KVM: Free new dirty bitmap if creating a new memslot failsSean Christopherson
Fix a goof in kvm_prepare_memory_region() where KVM fails to free the new memslot's dirty bitmap during a CREATE action if kvm_arch_prepare_memory_region() fails. The logic is supposed to detect if the bitmap was allocated and thus needs to be freed, versus if the bitmap was inherited from the old memslot and thus needs to be kept. If there is no old memslot, then obviously the bitmap can't have been inherited The bug was exposed by commit 86931ff7207b ("KVM: x86/mmu: Do not create SPTEs for GFNs that exceed host.MAXPHYADDR"), which made it trivally easy for syzkaller to trigger failure during kvm_arch_prepare_memory_region(), but the bug can be hit other ways too, e.g. due to -ENOMEM when allocating x86's memslot metadata. The backtrace from kmemleak: __vmalloc_node_range+0xb40/0xbd0 mm/vmalloc.c:3195 __vmalloc_node mm/vmalloc.c:3232 [inline] __vmalloc+0x49/0x50 mm/vmalloc.c:3246 __vmalloc_array mm/util.c:671 [inline] __vcalloc+0x49/0x70 mm/util.c:694 kvm_alloc_dirty_bitmap virt/kvm/kvm_main.c:1319 kvm_prepare_memory_region virt/kvm/kvm_main.c:1551 kvm_set_memslot+0x1bd/0x690 virt/kvm/kvm_main.c:1782 __kvm_set_memory_region+0x689/0x750 virt/kvm/kvm_main.c:1949 kvm_set_memory_region virt/kvm/kvm_main.c:1962 kvm_vm_ioctl_set_memory_region virt/kvm/kvm_main.c:1974 kvm_vm_ioctl+0x377/0x13a0 virt/kvm/kvm_main.c:4528 vfs_ioctl fs/ioctl.c:51 __do_sys_ioctl fs/ioctl.c:870 __se_sys_ioctl fs/ioctl.c:856 __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae And the relevant sequence of KVM events: ioctl(3, KVM_CREATE_VM, 0) = 4 ioctl(4, KVM_SET_USER_MEMORY_REGION, {slot=0, flags=KVM_MEM_LOG_DIRTY_PAGES, guest_phys_addr=0x10000000000000, memory_size=4096, userspace_addr=0x20fe8000} ) = -1 EINVAL (Invalid argument) Fixes: 244893fa2859 ("KVM: Dynamically allocate "new" memslots from the get-go") Cc: stable@vger.kernel.org Reported-by: syzbot+8606b8a9cc97a63f1c87@syzkaller.appspotmail.com Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220518003842.1341782-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-20KVM: eventfd: Fix false positive RCU usage warningWanpeng Li
The splat below can be seen when running kvm-unit-test: ============================= WARNING: suspicious RCU usage 5.18.0-rc7 #5 Tainted: G IOE ----------------------------- /home/kernel/linux/arch/x86/kvm/../../../virt/kvm/eventfd.c:80 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 4 locks held by qemu-system-x86/35124: #0: ffff9725391d80b8 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x77/0x710 [kvm] #1: ffffbd25cfb2a0b8 (&kvm->srcu){....}-{0:0}, at: vcpu_enter_guest+0xdeb/0x1900 [kvm] #2: ffffbd25cfb2b920 (&kvm->irq_srcu){....}-{0:0}, at: kvm_hv_notify_acked_sint+0x79/0x1e0 [kvm] #3: ffffbd25cfb2b920 (&kvm->irq_srcu){....}-{0:0}, at: irqfd_resampler_ack+0x5/0x110 [kvm] stack backtrace: CPU: 2 PID: 35124 Comm: qemu-system-x86 Tainted: G IOE 5.18.0-rc7 #5 Call Trace: <TASK> dump_stack_lvl+0x6c/0x9b irqfd_resampler_ack+0xfd/0x110 [kvm] kvm_notify_acked_gsi+0x32/0x90 [kvm] kvm_hv_notify_acked_sint+0xc5/0x1e0 [kvm] kvm_hv_set_msr_common+0xec1/0x1160 [kvm] kvm_set_msr_common+0x7c3/0xf60 [kvm] vmx_set_msr+0x394/0x1240 [kvm_intel] kvm_set_msr_ignored_check+0x86/0x200 [kvm] kvm_emulate_wrmsr+0x4f/0x1f0 [kvm] vmx_handle_exit+0x6fb/0x7e0 [kvm_intel] vcpu_enter_guest+0xe5a/0x1900 [kvm] kvm_arch_vcpu_ioctl_run+0x16e/0xac0 [kvm] kvm_vcpu_ioctl+0x279/0x710 [kvm] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae resampler-list is protected by irq_srcu (see kvm_irqfd_assign), so fix the false positive by using list_for_each_entry_srcu(). Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1652950153-12489-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-17kvm/vfio: Fix potential deadlock problem in vfioWan Jiabing
Fix following coccicheck warning: ./virt/kvm/vfio.c:258:1-7: preceding lock on line 236 If kvm_vfio_file_iommu_group() failed, code would goto err_fdput with mutex_lock acquired and then return ret. It might cause potential deadlock. Move mutex_unlock bellow err_fdput tag to fix it. Fixes: d55d9e7a45721 ("kvm/vfio: Store the struct file in the kvm_vfio_group") Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20220517023441.4258-1-wanjiabing@vivo.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-05-13kvm/vfio: Remove vfio_group from kvmJason Gunthorpe
None of the VFIO APIs take in the vfio_group anymore, so we can remove it completely. This has a subtle side effect on the enforced coherency tracking. The vfio_group_get_external_user() was holding on to the container_users which would prevent the iommu_domain and thus the enforced coherency value from changing while the group is registered with kvm. It changes the security proof slightly into 'user must hold a group FD that has a device that cannot enforce DMA coherence'. As opening the group FD, not attaching the container, is the privileged operation this doesn't change the security properties much. On the flip side it paves the way to changing the iommu_domain/container attached to a group at runtime which is something that will be required to support nested translation. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de>i Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/7-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-05-13vfio: Change vfio_group_set_kvm() to vfio_file_set_kvm()Jason Gunthorpe
Just change the argument from struct vfio_group to struct file *. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/6-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-05-13vfio: Change vfio_external_check_extension() to vfio_file_enforced_coherent()Jason Gunthorpe
Instead of a general extension check change the function into a limited test if the iommu_domain has enforced coherency, which is the only thing kvm needs to query. Make the new op self contained by properly refcounting the container before touching it. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/5-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-05-13vfio: Remove vfio_external_group_match_file()Jason Gunthorpe
vfio_group_fops_open() ensures there is only ever one struct file open for any struct vfio_group at any time: /* Do we need multiple instances of the group open? Seems not. */ opened = atomic_cmpxchg(&group->opened, 0, 1); if (opened) { vfio_group_put(group); return -EBUSY; Therefor the struct file * can be used directly to search the list of VFIO groups that KVM keeps instead of using the vfio_external_group_match_file() callback to try to figure out if the passed in FD matches the list or not. Delete vfio_external_group_match_file(). Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Yi Liu <yi.l.liu@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/4-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-05-13vfio: Change vfio_external_user_iommu_id() to vfio_file_iommu_group()Jason Gunthorpe
The only caller wants to get a pointer to the struct iommu_group associated with the VFIO group file. Instead of returning the group ID then searching sysfs for that string to get the struct iommu_group just directly return the iommu_group pointer already held by the vfio_group struct. It already has a safe lifetime due to the struct file kref, the vfio_group and thus the iommu_group cannot be destroyed while the group file is open. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Yi Liu <yi.l.liu@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/3-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-05-13kvm/vfio: Store the struct file in the kvm_vfio_groupJason Gunthorpe
Following patches will change the APIs to use the struct file as the handle instead of the vfio_group, so hang on to a reference to it with the same duration of as the vfio_group. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Yi Liu <yi.l.liu@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/2-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-05-13kvm/vfio: Move KVM_DEV_VFIO_GROUP_* ioctls into functionsJason Gunthorpe
To make it easier to read and change in following patches. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Yi Liu <yi.l.liu@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/1-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-05-02KVM: Add max_vcpus field in common 'struct kvm'Sean Christopherson
For TDX guests, the maximum number of vcpus needs to be specified when the TDX guest VM is initialized (creating the TDX data corresponding to TDX guest) before creating vcpu. It needs to record the maximum number of vcpus on VM creation (KVM_CREATE_VM) and return error if the number of vcpus exceeds it Because there is already max_vcpu member in arm64 struct kvm_arch, move it to common struct kvm and initialize it to KVM_MAX_VCPUS before kvm_arch_init_vm() instead of adding it to x86 struct kvm_arch. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Message-Id: <e53234cdee6a92357d06c80c03d77c19cdefb804.1646422845.git.isaku.yamahata@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-29Merge branch 'kvm-fixes-for-5.18-rc5' into HEADPaolo Bonzini
Fixes for (relatively) old bugs, to be merged in both the -rc and next development trees: * Fix potential races when walking host page table * Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT * Fix shadow page table leak when KVM runs nested
2022-04-29KVM: fix bad user ABI for KVM_EXIT_SYSTEM_EVENTPaolo Bonzini
When KVM_EXIT_SYSTEM_EVENT was introduced, it included a flags member that at the time was unused. Unfortunately this extensibility mechanism has several issues: - x86 is not writing the member, so it would not be possible to use it on x86 except for new events - the member is not aligned to 64 bits, so the definition of the uAPI struct is incorrect for 32- on 64-bit userspace. This is a problem for RISC-V, which supports CONFIG_KVM_COMPAT, but fortunately usage of flags was only introduced in 5.18. Since padding has to be introduced, place a new field in there that tells if the flags field is valid. To allow further extensibility, in fact, change flags to an array of 16 values, and store how many of the values are valid. The availability of the new ndata field is tied to a system capability; all architectures are changed to fill in the field. To avoid breaking compilation of userspace that was using the flags field, provide a userspace-only union to overlap flags with data[0]. The new field is placed at the same offset for both 32- and 64-bit userspace. Cc: Will Deacon <will@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Peter Gonda <pgonda@google.com> Cc: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Message-Id: <20220422103013.34832-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: SEV: add cache flush to solve SEV cache incoherency issuesMingwei Zhang
Flush the CPU caches when memory is reclaimed from an SEV guest (where reclaim also includes it being unmapped from KVM's memslots). Due to lack of coherency for SEV encrypted memory, failure to flush results in silent data corruption if userspace is malicious/broken and doesn't ensure SEV guest memory is properly pinned and unpinned. Cache coherency is not enforced across the VM boundary in SEV (AMD APM vol.2 Section 15.34.7). Confidential cachelines, generated by confidential VM guests have to be explicitly flushed on the host side. If a memory page containing dirty confidential cachelines was released by VM and reallocated to another user, the cachelines may corrupt the new user at a later time. KVM takes a shortcut by assuming all confidential memory remain pinned until the end of VM lifetime. Therefore, KVM does not flush cache at mmu_notifier invalidation events. Because of this incorrect assumption and the lack of cache flushing, malicous userspace can crash the host kernel: creating a malicious VM and continuously allocates/releases unpinned confidential memory pages when the VM is running. Add cache flush operations to mmu_notifier operations to ensure that any physical memory leaving the guest VM get flushed. In particular, hook mmu_notifier_invalidate_range_start and mmu_notifier_release events and flush cache accordingly. The hook after releasing the mmu lock to avoid contention with other vCPUs. Cc: stable@vger.kernel.org Suggested-by: Sean Christpherson <seanjc@google.com> Reported-by: Mingwei Zhang <mizhang@google.com> Signed-off-by: Mingwei Zhang <mizhang@google.com> Message-Id: <20220421031407.2516575-4-mizhang@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: SPDX style and spelling fixesTom Rix
SPDX comments use use /* */ style comments in headers anad // style comments in .c files. Also fix two spelling mistakes. Signed-off-by: Tom Rix <trix@redhat.com> Message-Id: <20220410153840.55506-1-trix@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21KVM: Initialize debugfs_dentry when a VM is created to avoid NULL derefSean Christopherson
Initialize debugfs_entry to its semi-magical -ENOENT value when the VM is created. KVM's teardown when VM creation fails is kludgy and calls kvm_uevent_notify_change() and kvm_destroy_vm_debugfs() even if KVM never attempted kvm_create_vm_debugfs(). Because debugfs_entry is zero initialized, the IS_ERR() checks pass and KVM derefs a NULL pointer. BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1068b1067 P4D 1068b1067 PUD 1068b0067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 871 Comm: repro Not tainted 5.18.0-rc1+ #825 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:__dentry_path+0x7b/0x130 Call Trace: <TASK> dentry_path_raw+0x42/0x70 kvm_uevent_notify_change.part.0+0x10c/0x200 [kvm] kvm_put_kvm+0x63/0x2b0 [kvm] kvm_dev_ioctl+0x43a/0x920 [kvm] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x31/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> Modules linked in: kvm_intel kvm irqbypass Fixes: a44a4cc1c969 ("KVM: Don't create VM debugfs files outside of the VM directory") Cc: stable@vger.kernel.org Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oupton@google.com> Reported-by: syzbot+df6fbbd2ee39f21289ef@syzkaller.appspotmail.com Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Oliver Upton <oupton@google.com> Message-Id: <20220415004622.2207751-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-08Merge tag 'kvmarm-fixes-5.18-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.18, take #1 - Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2 - Fix the MMU write-lock not being taken on THP split - Fix mixed-width VM handling - Fix potential UAF when debugfs registration fails - Various selftest updates for all of the above
2022-04-07KVM: Don't create VM debugfs files outside of the VM directoryOliver Upton
Unfortunately, there is no guarantee that KVM was able to instantiate a debugfs directory for a particular VM. To that end, KVM shouldn't even attempt to create new debugfs files in this case. If the specified parent dentry is NULL, debugfs_create_file() will instantiate files at the root of debugfs. For arm64, it is possible to create the vgic-state file outside of a VM directory, the file is not cleaned up when a VM is destroyed. Nonetheless, the corresponding struct kvm is freed when the VM is destroyed. Nip the problem in the bud for all possible errant debugfs file creations by initializing kvm->debugfs_dentry to -ENOENT. In so doing, debugfs_create_file() will fail instead of creating the file in the root directory. Cc: stable@kernel.org Fixes: 929f45e32499 ("kvm: no need to check return value of debugfs_create functions") Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220406235615.1447180-2-oupton@google.com
2022-04-06KVM: avoid NULL pointer dereference in kvm_dirty_ring_pushPaolo Bonzini
kvm_vcpu_release() will call kvm_dirty_ring_free(), freeing ring->dirty_gfns and setting it to NULL. Afterwards, it calls kvm_arch_vcpu_destroy(). However, if closing the file descriptor races with KVM_RUN in such away that vcpu->arch.st.preempted == 0, the following call stack leads to a NULL pointer dereference in kvm_dirty_run_push(): mark_page_dirty_in_slot+0x192/0x270 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3171 kvm_steal_time_set_preempted arch/x86/kvm/x86.c:4600 [inline] kvm_arch_vcpu_put+0x34e/0x5b0 arch/x86/kvm/x86.c:4618 vcpu_put+0x1b/0x70 arch/x86/kvm/../../../virt/kvm/kvm_main.c:211 vmx_free_vcpu+0xcb/0x130 arch/x86/kvm/vmx/vmx.c:6985 kvm_arch_vcpu_destroy+0x76/0x290 arch/x86/kvm/x86.c:11219 kvm_vcpu_destroy arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 [inline] The fix is to release the dirty page ring after kvm_arch_vcpu_destroy has run. Reported-by: Qiuhao Li <qiuhao@sysec.org> Reported-by: Gaoning Pan <pgn@zju.edu.cn> Reported-by: Yongkang Jia <kangel@zju.edu.cn> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-02KVM: Remove dirty handling from gfn_to_pfn_cache completelyDavid Woodhouse
It isn't OK to cache the dirty status of a page in internal structures for an indefinite period of time. Any time a vCPU exits the run loop to userspace might be its last; the VMM might do its final check of the dirty log, flush the last remaining dirty pages to the destination and complete a live migration. If we have internal 'dirty' state which doesn't get flushed until the vCPU is finally destroyed on the source after migration is complete, then we have lost data because that will escape the final copy. This problem already exists with the use of kvm_vcpu_unmap() to mark pages dirty in e.g. VMX nesting. Note that the actual Linux MM already considers the page to be dirty since we have a writeable mapping of it. This is just about the KVM dirty logging. For the nesting-style use cases (KVM_GUEST_USES_PFN) we will need to track which gfn_to_pfn_caches have been used and explicitly mark the corresponding pages dirty before returning to userspace. But we would have needed external tracking of that anyway, rather than walking the full list of GPCs to find those belonging to this vCPU which are dirty. So let's rely *solely* on that external tracking, and keep it simple rather than laying a tempting trap for callers to fall into. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220303154127.202856-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-02KVM: Use enum to track if cached PFN will be used in guest and/or hostSean Christopherson
Replace the guest_uses_pa and kernel_map booleans in the PFN cache code with a unified enum/bitmask. Using explicit names makes it easier to review and audit call sites. Opportunistically add a WARN to prevent passing garbage; instantating a cache without declaring its usage is either buggy or pointless. Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220303154127.202856-2-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-02KVM: Don't actually set a request when evicting vCPUs for GFN cache invdSean Christopherson
Don't actually set a request bit in vcpu->requests when making a request purely to force a vCPU to exit the guest. Logging a request but not actually consuming it would cause the vCPU to get stuck in an infinite loop during KVM_RUN because KVM would see the pending request and bail from VM-Enter to service the request. Note, it's currently impossible for KVM to set KVM_REQ_GPC_INVALIDATE as nothing in KVM is wired up to set guest_uses_pa=true. But, it'd be all too easy for arch code to introduce use of kvm_gfn_to_pfn_cache_init() without implementing handling of the request, especially since getting test coverage of MMU notifier interaction with specific KVM features usually requires a directed test. Opportunistically rename gfn_to_pfn_cache_invalidate_start()'s wake_vcpus to evict_vcpus. The purpose of the request is to get vCPUs out of guest mode, it's supposed to _avoid_ waking vCPUs that are blocking. Opportunistically rename KVM_REQ_GPC_INVALIDATE to be more specific as to what it wants to accomplish, and to genericize the name so that it can used for similar but unrelated scenarios, should they arise in the future. Add a comment and documentation to explain why the "no action" request exists. Add compile-time assertions to help detect improper usage. Use the inner assertless helper in the one s390 path that makes requests without a hardcoded request. Cc: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220223165302.3205276-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-02KVM: avoid double put_page with gfn-to-pfn cacheDavid Woodhouse
If the cache's user host virtual address becomes invalid, there is still a path from kvm_gfn_to_pfn_cache_refresh() where __release_gpc() could release the pfn but the gpc->pfn field has not been overwritten with an error value. If this happens, kvm_gfn_to_pfn_cache_unmap will call put_page again on the same page. Cc: stable@vger.kernel.org Fixes: 982ed0de4753 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support") Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-29Revert "KVM: set owner of cpu and vm file operations"David Matlack
This reverts commit 3d3aab1b973b01bd2a1aa46307e94a1380b1d802. Now that the KVM module's lifetime is tied to kvm.users_count, there is no need to also tie it's lifetime to the lifetime of the VM and vCPU file descriptors. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: David Matlack <dmatlack@google.com> Message-Id: <20220303183328.1499189-3-dmatlack@google.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-29KVM: Prevent module exit until all VMs are freedDavid Matlack
Tie the lifetime the KVM module to the lifetime of each VM via kvm.users_count. This way anything that grabs a reference to the VM via kvm_get_kvm() cannot accidentally outlive the KVM module. Prior to this commit, the lifetime of the KVM module was tied to the lifetime of /dev/kvm file descriptors, VM file descriptors, and vCPU file descriptors by their respective file_operations "owner" field. This approach is insufficient because references grabbed via kvm_get_kvm() do not prevent closing any of the aforementioned file descriptors. This fixes a long standing theoretical bug in KVM that at least affects async page faults. kvm_setup_async_pf() grabs a reference via kvm_get_kvm(), and drops it in an asynchronous work callback. Nothing prevents the VM file descriptor from being closed and the KVM module from being unloaded before this callback runs. Fixes: af585b921e5d ("KVM: Halt vcpu if page it tries to access is swapped out") Fixes: 3d3aab1b973b ("KVM: set owner of cpu and vm file operations") Cc: stable@vger.kernel.org Suggested-by: Ben Gardon <bgardon@google.com> [ Based on a patch from Ben implemented for Google's kernel. ] Signed-off-by: David Matlack <dmatlack@google.com> Message-Id: <20220303183328.1499189-2-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-11KVM: compat: riscv: Prevent KVM_COMPAT from being selectedGuo Ren
Current riscv doesn't support the 32bit KVM API. Let's make it clear by not selecting KVM_COMPAT. Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Signed-off-by: Guo Ren <guoren@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Anup Patel <anup@brainfault.org> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-03-08KVM: use __vcalloc for very large allocationsPaolo Bonzini
Allocations whose size is related to the memslot size can be arbitrarily large. Do not use kvzalloc/kvcalloc, as those are limited to "not crazy" sizes that fit in 32 bits. Cc: stable@vger.kernel.org Fixes: 7661809d493b ("mm: don't allow oversized kvmalloc() calls") Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-04Merge branch 'kvm-bugfixes' into HEADPaolo Bonzini
Merge bugfixes from 5.17 before merging more tricky work.
2022-03-01KVM: Drop kvm_reload_remote_mmus(), open code request in x86 usersSean Christopherson
Remove the generic kvm_reload_remote_mmus() and open code its functionality into the two x86 callers. x86 is (obviously) the only architecture that uses the hook, and is also the only architecture that uses KVM_REQ_MMU_RELOAD in a way that's consistent with the name. That will change in a future patch, as x86's usage when zapping a single shadow page x86 doesn't actually _need_ to reload all vCPUs' MMUs, only MMUs whose root is being zapped actually need to be reloaded. s390 also uses KVM_REQ_MMU_RELOAD, but for a slightly different purpose. Drop the generic code in anticipation of implementing s390 and x86 arch specific requests, which will allow dropping KVM_REQ_MMU_RELOAD entirely. Opportunistically reword the x86 TDP MMU comment to avoid making references to functions (and requests!) when possible, and to remove the rather ambiguous "this". No functional change intended. Cc: Ben Gardon <bgardon@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Ben Gardon <bgardon@google.com> Message-Id: <20220225182248.3812651-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-25KVM: Move VM's worker kthreads back to the original cgroup before exiting.Vipin Sharma
VM worker kthreads can linger in the VM process's cgroup for sometime after KVM terminates the VM process. KVM terminates the worker kthreads by calling kthread_stop() which waits on the 'exited' completion, triggered by exit_mm(), via mm_release(), in do_exit() during the kthread's exit. However, these kthreads are removed from the cgroup using the cgroup_exit() which happens after the exit_mm(). Therefore, A VM process can terminate in between the exit_mm() and cgroup_exit() calls, leaving only worker kthreads in the cgroup. Moving worker kthreads back to the original cgroup (kthreadd_task's cgroup) makes sure that the cgroup is empty as soon as the main VM process is terminated. Signed-off-by: Vipin Sharma <vipinsh@google.com> Suggested-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220222054848.563321-1-vipinsh@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-17KVM: Fix lockdep false negative during host resumeWanpeng Li
I saw the below splatting after the host suspended and resumed. WARNING: CPU: 0 PID: 2943 at kvm/arch/x86/kvm/../../../virt/kvm/kvm_main.c:5531 kvm_resume+0x2c/0x30 [kvm] CPU: 0 PID: 2943 Comm: step_after_susp Tainted: G W IOE 5.17.0-rc3+ #4 RIP: 0010:kvm_resume+0x2c/0x30 [kvm] Call Trace: <TASK> syscore_resume+0x90/0x340 suspend_devices_and_enter+0xaee/0xe90 pm_suspend.cold+0x36b/0x3c2 state_store+0x82/0xf0 kernfs_fop_write_iter+0x1b6/0x260 new_sync_write+0x258/0x370 vfs_write+0x33f/0x510 ksys_write+0xc9/0x160 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae lockdep_is_held() can return -1 when lockdep is disabled which triggers this warning. Let's use lockdep_assert_not_held() which can detect incorrect calls while holding a lock and it also avoids false negatives when lockdep is disabled. Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1644920142-81249-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-10KVM: Remove unused "kvm" of kvm_make_vcpu_request()Jinrong Liang
The "struct kvm *kvm" parameter of kvm_make_vcpu_request() is not used, so remove it. No functional change intended. Signed-off-by: Jinrong Liang <cloudliang@tencent.com> Message-Id: <20220125095909.38122-19-cloudliang@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-28Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "Two larger x86 series: - Redo incorrect fix for SEV/SMAP erratum - Windows 11 Hyper-V workaround Other x86 changes: - Various x86 cleanups - Re-enable access_tracking_perf_test - Fix for #GP handling on SVM - Fix for CPUID leaf 0Dh in KVM_GET_SUPPORTED_CPUID - Fix for ICEBP in interrupt shadow - Avoid false-positive RCU splat - Enable Enlightened MSR-Bitmap support for real ARM: - Correctly update the shadow register on exception injection when running in nVHE mode - Correctly use the mm_ops indirection when performing cache invalidation from the page-table walker - Restrict the vgic-v3 workaround for SEIS to the two known broken implementations Generic code changes: - Dead code cleanup" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits) KVM: eventfd: Fix false positive RCU usage warning KVM: nVMX: Allow VMREAD when Enlightened VMCS is in use KVM: nVMX: Implement evmcs_field_offset() suitable for handle_vmread() KVM: nVMX: Rename vmcs_to_field_offset{,_table} KVM: nVMX: eVMCS: Filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER KVM: nVMX: Also filter MSR_IA32_VMX_TRUE_PINBASED_CTLS when eVMCS selftests: kvm: check dynamic bits against KVM_X86_XCOMP_GUEST_SUPP KVM: x86: add system attribute to retrieve full set of supported xsave states KVM: x86: Add a helper to retrieve userspace address from kvm_device_attr selftests: kvm: move vm_xsave_req_perm call to amx_test KVM: x86: Sync the states size with the XCR0/IA32_XSS at, any time KVM: x86: Update vCPU's runtime CPUID on write to MSR_IA32_XSS KVM: x86: Keep MSR_IA32_XSS unchanged for INIT KVM: x86: Free kvm_cpuid_entry2 array on post-KVM_RUN KVM_SET_CPUID{,2} KVM: nVMX: WARN on any attempt to allocate shadow VMCS for vmcs02 KVM: selftests: Don't skip L2's VMCALL in SMM test for SVM guest KVM: x86: Check .flags in kvm_cpuid_check_equal() too KVM: x86: Forcibly leave nested virt when SMM state is toggled KVM: SVM: drop unnecessary code in svm_hv_vmcb_dirty_nested_enlightenments() KVM: SVM: hyper-v: Enable Enlightened MSR-Bitmap support for real ...
2022-01-28KVM: eventfd: Fix false positive RCU usage warningHou Wenlong
Fix the following false positive warning: ============================= WARNING: suspicious RCU usage 5.16.0-rc4+ #57 Not tainted ----------------------------- arch/x86/kvm/../../../virt/kvm/eventfd.c:484 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by fc_vcpu 0/330: #0: ffff8884835fc0b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x88/0x6f0 [kvm] #1: ffffc90004c0bb68 (&kvm->srcu){....}-{0:0}, at: vcpu_enter_guest+0x600/0x1860 [kvm] #2: ffffc90004c0c1d0 (&kvm->irq_srcu){....}-{0:0}, at: kvm_notify_acked_irq+0x36/0x180 [kvm] stack backtrace: CPU: 26 PID: 330 Comm: fc_vcpu 0 Not tainted 5.16.0-rc4+ Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x44/0x57 kvm_notify_acked_gsi+0x6b/0x70 [kvm] kvm_notify_acked_irq+0x8d/0x180 [kvm] kvm_ioapic_update_eoi+0x92/0x240 [kvm] kvm_apic_set_eoi_accelerated+0x2a/0xe0 [kvm] handle_apic_eoi_induced+0x3d/0x60 [kvm_intel] vmx_handle_exit+0x19c/0x6a0 [kvm_intel] vcpu_enter_guest+0x66e/0x1860 [kvm] kvm_arch_vcpu_ioctl_run+0x438/0x7f0 [kvm] kvm_vcpu_ioctl+0x38a/0x6f0 [kvm] __x64_sys_ioctl+0x89/0xc0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Since kvm_unregister_irq_ack_notifier() does synchronize_srcu(&kvm->irq_srcu), kvm->irq_ack_notifier_list is protected by kvm->irq_srcu. In fact, kvm->irq_srcu SRCU read lock is held in kvm_notify_acked_irq(), making it a false positive warning. So use hlist_for_each_entry_srcu() instead of hlist_for_each_entry_rcu(). Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Hou Wenlong <houwenlong93@linux.alibaba.com> Message-Id: <f98bac4f5052bad2c26df9ad50f7019e40434512.1643265976.git.houwenlong.hwl@antgroup.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-26Revert "KVM: SVM: avoid infinite loop on NPF from bad address"Sean Christopherson
Revert a completely broken check on an "invalid" RIP in SVM's workaround for the DecodeAssists SMAP errata. kvm_vcpu_gfn_to_memslot() obviously expects a gfn, i.e. operates in the guest physical address space, whereas RIP is a virtual (not even linear) address. The "fix" worked for the problematic KVM selftest because the test identity mapped RIP. Fully revert the hack instead of trying to translate RIP to a GPA, as the non-SEV case is now handled earlier, and KVM cannot access guest page tables to translate RIP. This reverts commit e72436bc3a5206f95bb384e741154166ddb3202e. Fixes: e72436bc3a52 ("KVM: SVM: avoid infinite loop on NPF from bad address") Reported-by: Liam Merwick <liam.merwick@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Message-Id: <20220120010719.711476-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-24KVM: remove async parameter of hva_to_pfn_remapped()Xianting Tian
The async parameter of hva_to_pfn_remapped() is not used, so remove it. Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com> Message-Id: <20220124020456.156386-1-xianting.tian@linux.alibaba.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-22Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull more kvm updates from Paolo Bonzini: "Generic: - selftest compilation fix for non-x86 - KVM: avoid warning on s390 in mark_page_dirty x86: - fix page write-protection bug and improve comments - use binary search to lookup the PMU event filter, add test - enable_pmu module parameter support for Intel CPUs - switch blocked_vcpu_on_cpu_lock to raw spinlock - cleanups of blocked vCPU logic - partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression) - various small fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits) docs: kvm: fix WARNINGs from api.rst selftests: kvm/x86: Fix the warning in lib/x86_64/processor.c selftests: kvm/x86: Fix the warning in pmu_event_filter_test.c kvm: selftests: Do not indent with spaces kvm: selftests: sync uapi/linux/kvm.h with Linux header selftests: kvm: add amx_test to .gitignore KVM: SVM: Nullify vcpu_(un)blocking() hooks if AVIC is disabled KVM: SVM: Move svm_hardware_setup() and its helpers below svm_x86_ops KVM: SVM: Drop AVIC's intermediate avic_set_running() helper KVM: VMX: Don't do full kick when handling posted interrupt wakeup KVM: VMX: Fold fallback path into triggering posted IRQ helper KVM: VMX: Pass desired vector instead of bool for triggering posted IRQ KVM: VMX: Don't do full kick when triggering posted interrupt "fails" KVM: SVM: Skip AVIC and IRTE updates when loading blocking vCPU KVM: SVM: Use kvm_vcpu_is_blocking() in AVIC load to handle preemption KVM: SVM: Remove unnecessary APICv/AVIC update in vCPU unblocking path KVM: SVM: Don't bother checking for "running" AVIC when kicking for IPIs KVM: SVM: Signal AVIC doorbell iff vCPU is in guest mode KVM: x86: Remove defunct pre_block/post_block kvm_x86_ops hooks KVM: x86: Unexport LAPIC's switch_to_{hv,sw}_timer() helpers ...
2022-01-19KVM: Move x86 VMX's posted interrupt list_head to vcpu_vmxSean Christopherson
Move the seemingly generic block_vcpu_list from kvm_vcpu to vcpu_vmx, and rename the list and all associated variables to clarify that it tracks the set of vCPU that need to be poked on a posted interrupt to the wakeup vector. The list is not used to track _all_ vCPUs that are blocking, and the term "blocked" can be misleading as it may refer to a blocking condition in the host or the guest, where as the PI wakeup case is specifically for the vCPUs that are actively blocking from within the guest. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20211208015236.1616697-7-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-19KVM: Drop unused kvm_vcpu.pre_pcpu fieldSean Christopherson
Remove kvm_vcpu.pre_pcpu as it no longer has any users. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20211208015236.1616697-6-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-19KVM: avoid warning on s390 in mark_page_dirtyChristian Borntraeger
Avoid warnings on s390 like [ 1801.980931] CPU: 12 PID: 117600 Comm: kworker/12:0 Tainted: G E 5.17.0-20220113.rc0.git0.32ce2abb03cf.300.fc35.s390x+next #1 [ 1801.980938] Workqueue: events irqfd_inject [kvm] [...] [ 1801.981057] Call Trace: [ 1801.981060] [<000003ff805f0f5c>] mark_page_dirty_in_slot+0xa4/0xb0 [kvm] [ 1801.981083] [<000003ff8060e9fe>] adapter_indicators_set+0xde/0x268 [kvm] [ 1801.981104] [<000003ff80613c24>] set_adapter_int+0x64/0xd8 [kvm] [ 1801.981124] [<000003ff805fb9aa>] kvm_set_irq+0xc2/0x130 [kvm] [ 1801.981144] [<000003ff805f8d86>] irqfd_inject+0x76/0xa0 [kvm] [ 1801.981164] [<0000000175e56906>] process_one_work+0x1fe/0x470 [ 1801.981173] [<0000000175e570a4>] worker_thread+0x64/0x498 [ 1801.981176] [<0000000175e5ef2c>] kthread+0x10c/0x110 [ 1801.981180] [<0000000175de73c8>] __ret_from_fork+0x40/0x58 [ 1801.981185] [<000000017698440a>] ret_from_fork+0xa/0x40 when writing to a guest from an irqfd worker as long as we do not have the dirty ring. Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reluctantly-acked-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20220113122924.740496-1-borntraeger@linux.ibm.com> Fixes: 2efd61a608b0 ("KVM: Warn if mark_page_dirty() is called without an active vCPU") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm updates from Paolo Bonzini: "RISCV: - Use common KVM implementation of MMU memory caches - SBI v0.2 support for Guest - Initial KVM selftests support - Fix to avoid spurious virtual interrupts after clearing hideleg CSR - Update email address for Anup and Atish ARM: - Simplification of the 'vcpu first run' by integrating it into KVM's 'pid change' flow - Refactoring of the FP and SVE state tracking, also leading to a simpler state and less shared data between EL1 and EL2 in the nVHE case - Tidy up the header file usage for the nvhe hyp object - New HYP unsharing mechanism, finally allowing pages to be unmapped from the Stage-1 EL2 page-tables - Various pKVM cleanups around refcounting and sharing - A couple of vgic fixes for bugs that would trigger once the vcpu xarray rework is merged, but not sooner - Add minimal support for ARMv8.7's PMU extension - Rework kvm_pgtable initialisation ahead of the NV work - New selftest for IRQ injection - Teach selftests about the lack of default IPA space and page sizes - Expand sysreg selftest to deal with Pointer Authentication - The usual bunch of cleanups and doc update s390: - fix sigp sense/start/stop/inconsistency - cleanups x86: - Clean up some function prototypes more - improved gfn_to_pfn_cache with proper invalidation, used by Xen emulation - add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery - completely remove potential TOC/TOU races in nested SVM consistency checks - update some PMCs on emulated instructions - Intel AMX support (joint work between Thomas and Intel) - large MMU cleanups - module parameter to disable PMU virtualization - cleanup register cache - first part of halt handling cleanups - Hyper-V enlightened MSR bitmap support for nested hypervisors Generic: - clean up Makefiles - introduce CONFIG_HAVE_KVM_DIRTY_RING - optimize memslot lookup using a tree - optimize vCPU array usage by converting to xarray" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (268 commits) x86/fpu: Fix inline prefix warnings selftest: kvm: Add amx selftest selftest: kvm: Move struct kvm_x86_state to header selftest: kvm: Reorder vcpu_load_state steps for AMX kvm: x86: Disable interception for IA32_XFD on demand x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state() kvm: selftests: Add support for KVM_CAP_XSAVE2 kvm: x86: Add support for getting/setting expanded xstate buffer x86/fpu: Add uabi_size to guest_fpu kvm: x86: Add CPUID support for Intel AMX kvm: x86: Add XCR0 support for Intel AMX kvm: x86: Disable RDMSR interception of IA32_XFD_ERR kvm: x86: Emulate IA32_XFD_ERR for guest kvm: x86: Intercept #NM for saving IA32_XFD_ERR x86/fpu: Prepare xfd_err in struct fpu_guest kvm: x86: Add emulation for IA32_XFD x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2 x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM x86/fpu: Add guest support to xfd_enable_feature() ...
2022-01-12Merge tag 'perf_core_for_v5.17_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Borislav Petkov: "Cleanup of the perf/kvm interaction." * tag 'perf_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Drop guest callback (un)register stubs KVM: arm64: Drop perf.c and fold its tiny bits of code into arm.c KVM: arm64: Hide kvm_arm_pmu_available behind CONFIG_HW_PERF_EVENTS=y KVM: arm64: Convert to the generic perf callbacks KVM: x86: Move Intel Processor Trace interrupt handler to vmx.c KVM: Move x86's perf guest info callbacks to generic KVM KVM: x86: More precisely identify NMI from guest when handling PMI KVM: x86: Drop current_vcpu for kvm_running_vcpu + kvm_arch_vcpu variable perf/core: Use static_call to optimize perf_guest_info_callbacks perf: Force architectures to opt-in to guest callbacks perf: Add wrappers for invoking guest callbacks perf/core: Rework guest callbacks to prepare for static_call support perf: Drop dead and useless guest "support" from arm, csky, nds32 and riscv perf: Stop pretending that perf can handle multiple guest callbacks KVM: x86: Register Processor Trace interrupt hook iff PT enabled in guest KVM: x86: Register perf callbacks after calling vendor's hardware_setup() perf: Protect perf_guest_cbs with RCU
2022-01-07KVM: Reinstate gfn_to_pfn_cache with invalidation supportDavid Woodhouse
This can be used in two modes. There is an atomic mode where the cached mapping is accessed while holding the rwlock, and a mode where the physical address is used by a vCPU in guest mode. For the latter case, an invalidation will wake the vCPU with the new KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any caches it still needs to access before entering guest mode again. Only one vCPU can be targeted by the wake requests; it's simple enough to make it wake all vCPUs or even a mask but I don't see a use case for that additional complexity right now. Invalidation happens from the invalidate_range_start MMU notifier, which needs to be able to sleep in order to wake the vCPU and wait for it. This means that revalidation potentially needs to "wait" for the MMU operation to complete and the invalidate_range_end notifier to be invoked. Like the vCPU when it takes a page fault in that period, we just spin — fixing that in a future patch by implementing an actual *wait* may be another part of shaving this particularly hirsute yak. As noted in the comments in the function itself, the only case where the invalidate_range_start notifier is expected to be called *without* being able to sleep is when the OOM reaper is killing the process. In that case, we expect the vCPU threads already to have exited, and thus there will be nothing to wake, and no reason to wait. So we clear the KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly if there actually *was* anything to wake up. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-07KVM: Warn if mark_page_dirty() is called without an active vCPUDavid Woodhouse
The various kvm_write_guest() and mark_page_dirty() functions must only ever be called in the context of an active vCPU, because if dirty ring tracking is enabled it may simply oops when kvm_get_running_vcpu() returns NULL for the vcpu and then kvm_dirty_ring_get() dereferences it. This oops was reported by "butt3rflyh4ck" <butterflyhuangxx@gmail.com> in https://lore.kernel.org/kvm/CAFcO6XOmoS7EacN_n6v4Txk7xL7iqRa2gABg3F7E3Naf5uG94g@mail.gmail.com/ That actual bug will be fixed under separate cover but this warning should help to prevent new ones from being added. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-2-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>