aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata
AgeCommit message (Collapse)Author
2016-05-27remove lots of IS_ERR_VALUE abusesArnd Bergmann
Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23Merge branch 'for-4.7-dw' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata sata_dwc_460ex updates from Tejun Heo: "Patches to bring sata_dwc_460ex up to snuff. It was a separate pull request because it depends on dmaengine dw platform changes which are now in mainline" * 'for-4.7-dw' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (24 commits) ata: dwc: add DMADEVICES dependency powerpc/4xx: Device tree update for the 460ex DWC SATA ata: sata_dwc_460ex: make debug messages neat ata: sata_dwc_460ex: supply physical address of FIFO to DMA ata: sata_dwc_460ex: use devm_ioremap ata: sata_dwc_460ex: tidy up sata_dwc_clear_dmacr() ata: sata_dwc_460ex: use readl/writel_relaxed() ata: sata_dwc_460ex: switch to new dmaengine_terminate_* API ata: sata_dwc_460ex: add __iomem to register base pointer ata: sata_dwc_460ex: get rid of incorrect cast ata: sata_dwc_460ex: get rid of some pointless casts ata: sata_dwc_460ex: remove empty libata callback ata: sata_dwc_460ex: correct HOSTDEV{P}_FROM_*() macros ata: sata_dwc_460ex: get rid of global data ata: sata_dwc_460ex: add phy support ata: sata_dwc_460ex: use "dmas" DT property to find dma channel ata: sata_dwc_460ex: don't call ata_sff_qc_issue() on DMA commands ata: sata_dwc_460ex: skip dma setup for non-dma commands ata: sata_dwc_460ex: select only core part of DMA driver ata: sata_dwc_460ex: DMA is always a flow controller ...
2016-05-23Merge branch 'for-4.7-zac' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata ZAC support from Tejun Heo: "This contains Zone ATA Command support for Shingled Magnetic Recording devices. In addition to sending the new commands down to the device, as ZAC commands depend on getting a lot of responses from the device, piping up responses is beefed up too. However, it doesn't involve changes to libata core mechanism or its interaction with upper layers, so I'm not expecting too many fallouts. Kudos to Hannes for driving SMR support" * 'for-4.7-zac' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (28 commits) libata: support host-aware and host-managed ZAC devices libata: support device-managed ZAC devices libata: NCQ encapsulation for ZAC MANAGEMENT OUT libata: Implement ZBC OUT translation libata: implement ZBC IN translation libata: fixup ZAC device disabling libata-scsi: Generate sense code for disabled devices libata-trace: decode subcommands libata: Check log page directory before accessing pages libata: Add command definitions for NCQ Encapsulation for READ LOG DMA EXT libata: Separate out ata_dev_config_ncq_send_recv() libata/libsas: Define ATA_CMD_NCQ_NON_DATA libsas: enable FPDMA SEND/RECEIVE libata: do not attempt to retrieve sense code twice libata-scsi: Set information sense field for invalid parameter libata-scsi: set bit pointer for sense code information libata-scsi: Set field pointer in sense code scsi: add scsi_set_sense_field_pointer() libata: Implement control mode page to select sense format libata-scsi: generate correct ATA pass-through sense ...
2016-05-19Merge tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "This time round the update brings in following changes: - new tegra driver for ADMA device - support for Xilinx AXI Direct Memory Access Engine and Xilinx AXI Central Direct Memory Access Engine and few updates to this driver - new cyclic capability to sun6i and few updates - slave-sg support in bcm2835 - updates to many drivers like designware, hsu, mv_xor, pxa, edma, qcom_hidma & bam" * tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (84 commits) dmaengine: ioatdma: disable relaxed ordering for ioatdma dmaengine: of_dma: approximate an average distribution dmaengine: core: Use IS_ENABLED() instead of checking for built-in or module dmaengine: edma: Re-evaluate errors when ccerr is triggered w/o error event dmaengine: qcom_hidma: add support for object hierarchy dmaengine: qcom_hidma: add debugfs hooks dmaengine: qcom_hidma: implement lower level hardware interface dmaengine: vdma: Add clock support Documentation: DT: vdma: Add clock support for dmas dmaengine: vdma: Add config structure to differentiate dmas MAINTAINERS: Update Tegra DMA maintainers dmaengine: tegra-adma: Add support for Tegra210 ADMA Documentation: DT: Add binding documentation for NVIDIA ADMA dmaengine: vdma: Add Support for Xilinx AXI Central Direct Memory Access Engine Documentation: DT: vdma: update binding doc for AXI CDMA dmaengine: vdma: Add Support for Xilinx AXI Direct Memory Access Engine Documentation: DT: vdma: update binding doc for AXI DMA dmaengine: vdma: Rename xilinx_vdma_ prefix to xilinx_dma dmaengine: slave means at least one of DMA_SLAVE, DMA_CYCLIC dmaengine: mv_xor: Allow selecting mv_xor for mvebu only compatible SoC ...
2016-05-18Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "First round of SCSI updates for the 4.6+ merge window. This batch includes the usual quota of driver updates (bnx2fc, mp3sas, hpsa, ncr5380, lpfc, hisi_sas, snic, aacraid, megaraid_sas). There's also a multiqueue update for scsi_debug, assorted bug fixes and a few other minor updates (refactor of scsi_sg_pools into generic code, alua and VPD updates, and struct timeval conversions)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (138 commits) mpt3sas: Used "synchronize_irq()"API to synchronize timed-out IO & TMs mpt3sas: Set maximum transfer length per IO to 4MB for VDs mpt3sas: Updating mpt3sas driver version to 13.100.00.00 mpt3sas: Fix initial Reference tag field for 4K PI drives. mpt3sas: Handle active cable exception event mpt3sas: Update MPI header to 2.00.42 Revert "lpfc: Delete unnecessary checks before the function call mempool_destroy" eata_pio: missing break statement hpsa: Fix type ZBC conditional checks scsi_lib: Decode T10 vendor IDs scsi_dh_alua: do not fail for unknown VPD identification scsi_debug: use locally assigned naa scsi_debug: uuid for lu name scsi_debug: vpd and mode page work scsi_debug: add multiple queue support bfa: fix bfa_fcb_itnim_alloc() error handling megaraid_sas: Downgrade two success messages to info cxlflash: Fix to resolve dead-lock during EEH recovery scsi_debug: rework resp_report_luns scsi_debug: use pdt constants ...
2016-05-13Merge branch 'for-4.6-fixes' into for-4.7Tejun Heo
2016-05-12ata: dwc: add DMADEVICES dependencyArnd Bergmann
The dwc_460ex SATA driver has become available on non-powerpc architectures and may cause randconfig build errors when CONFIG_DMADEVICES is not set and SATA_DWC_OLD_DMA is enabled: warning: (SATA_DWC_OLD_DMA) selects DW_DMAC_CORE which has unmet direct dependencies (DMADEVICES) ERROR: "dw_dma_probe" [drivers/ata/sata_dwc_460ex.ko] undefined! ERROR: "dw_dma_remove" [drivers/ata/sata_dwc_460ex.ko] undefined! This adds an explcit Kconfig dependency to CONFIG_SATA_DWC so we cannot run into broken configurations. While it would also be possible to build the driver with both CONFIG_DMADEVICES and SATA_DWC_OLD_DMA disabled, that case is not useful because there is no fallback to PIO mode when the DMA engine is not usable. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 50b433753df6 ("ata: sata_dwc_460ex: use "dmas" DT property to find dma channel") Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-12ata: sata_dwc_460ex: make debug messages neatAndy Shevchenko
There is a duplication in the debug messages when accessing SCR registers. Remove duplication to make the messages neat. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-12ata: sata_dwc_460ex: supply physical address of FIFO to DMAAndy Shevchenko
DMA operates with physical addresses which is not exactly the same as ioremap() returns. Introduce variable to keep physical address of the SATA FIFO register and supply it when prepare DMA channel. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-12ata: sata_dwc_460ex: use devm_ioremapAndy Shevchenko
This simplifies error handling and cleanup by using devm to manage IO mappings. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-12ata: sata_dwc_460ex: tidy up sata_dwc_clear_dmacr()Mans Rullgard
This consolidates the reads from each of the if/else branches to one place making the code a lot nicer to look at. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-12ata: sata_dwc_460ex: use readl/writel_relaxed()Mans Rullgard
Rename the register access macros and use standard _relaxed() ops instead of __raw variants with explicit byte swapping. The original driver used the ppc-specific in/out_le32(). When it was adapted to other systems, these were added to the driver under ifdefs. However, those names are not defined as macros on ppc, so it ended up replacing them there as well with altered semantics. This patch restores the original semantics on ppc and makes the accesses no less strict on other systems. Also fixes too many sparse warnings to count. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-12ata: sata_dwc_460ex: switch to new dmaengine_terminate_* APIAndy Shevchenko
Convert dmaengine_terminate_all() calls to synchronous and asynchronous versions where appropriate. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10ata: sata_dwc_460ex: add __iomem to register base pointerMans Rullgard
The pointer to the mmio register base is missing the __iomem annotation. Fix this. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10ata: sata_dwc_460ex: get rid of incorrect castMans Rullgard
The (void *__iomem) cast is wrong. Change the target type of the "base" pointer to void __iomem instead and drop the cast. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10ata: sata_dwc_460ex: get rid of some pointless castsMans Rullgard
Casting a pointer to unsigned long only to immediately cast it back to a pointer makes no sense. Fix this. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10ata: sata_dwc_460ex: remove empty libata callbackMans Rullgard
The sata_dwc_qc_prep() does nothing. Use the default ata_noop_qc_prep instead. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10ata: sata_dwc_460ex: correct HOSTDEV{P}_FROM_*() macrosAndy Shevchenko
Here we refactor HOSTDEV{P}_FROM_*() macros to fit one line and fix the definition of HSDEV_FROM_HSDEVP() where wrong name of the parameter waas used. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10ata: sata_dwc_460ex: get rid of global dataMans Rullgard
This moves all global data into the driver private struct, thus permitting multiple devices of this type to be used. The core_scr_read/write() functions are replaced with equivalent calls to the existing sata_dwc_scr_read/write(). Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10ata: sata_dwc_460ex: add phy supportMans Rullgard
This adds support for powering on an optional PHY when activating the device. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10ata: sata_dwc_460ex: use "dmas" DT property to find dma channelMans Rullgard
Currently this driver only works with a DesignWare DMA engine which it registers manually using the second "reg" address range and interrupt number from the DT node. This patch makes the driver instead use the "dmas" property if present, otherwise optionally falling back on the old way so existing device trees can continue to work. With this change, there is no longer any reason to depend on the 460EX machine type so drop that from Kconfig. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10ata: sata_dwc_460ex: don't call ata_sff_qc_issue() on DMA commandsAndy Shevchenko
ata_sff_qc_issue() can't handle DMA commands and thus we have to avoid it for them. Do call ata_bmdma_qc_issue() instead for this case. Note that the former one distinguishes PIO and DMA mode and behaves accordingly. Suggested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10ata: sata_dwc_460ex: skip dma setup for non-dma commandsMans Rullgard
Calling dmaengine_prep_slave_sg() for non-dma ATA commands is unnecessary at best and could be harmful if the dma driver reacts badly to this. It also causes this driver to print a bogus error message in these cases. This patch changes sata_dwc_qc_issue() to only do the dma setup for dma commands and also reports an error to libata if if fails. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10ata: sata_dwc_460ex: select only core part of DMA driverAndy Shevchenko
There is no need to have a platform driver compiled since the DMA driver is used as a library. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10ata: sata_dwc_460ex: DMA is always a flow controllerAndy Shevchenko
In the original code the DMA is always a flow controller. Set this accordingly in updated code. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10ata: sata_dwc_460ex: burst size must be in items not bytesAndy Shevchenko
The burst size as defined by DMAengine API is in items of address width. Derive burst size from AHB_DMA_BRST_DFLT (64 bytes) by dividing it to DMA_SLAVE_BUSWIDTH_4_BYTES (4 bytes) that gives us 16 items. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10ata: sata_dwc_460ex: set dma_boundary to 0x1fffAndy Shevchenko
The original code states: Make sure a LLI block is not created that will span 8K max FIS boundary. If the block spans such a FIS boundary, there is a chance that a DMA burst will cross that boundary -- this results in an error in the host controller. Since we have switched to generic DMAengine API we satisfy above by setting dma_boundary value to 0x1fff. Suggested-by: Mans Rullgard <mans@mansr.com> Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10ata: sata_dwc_460ex: fix crash on offline links without an attached driveChristian Lamparter
This patch fixes Machine Check "Data Write PLB Error" which happens when libata-sff's ata_sff_dev_select is trying to write into the device_addr in order to select a drive. However, SATA has no master or slave devices like the old ATA Bus, therefore selecting a different drive is kind of pointless. Data Write PLB Error Oops: Machine check, sig: 7 [#1] PowerPC 44x Platform Modules linked in: CPU: 0 PID: 508 Comm: scsi_eh_0 Not tainted 4.6.0-rc3-next-20160412+ #10 [...] NIP [c027e820] ata_sff_dev_select+0x3c/0x44 LR [c027e810] ata_sff_dev_select+0x2c/0x44 Call Trace: [cec31cd0] [c027da00] ata_sff_postreset+0x40/0xb4 (unreliable) [cec31ce0] [c027a03c] ata_eh_reset+0x5cc/0x928 [cec31d60] [c027a840] ata_eh_recover+0x330/0x10bc [cec31df0] [c027bae0] ata_do_eh+0x4c/0xa4 [...] Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-10ata: sata_dwc_460ex: remove incorrect lockingMans Rullgard
This lock is already taken in ata_scsi_queuecmd() a few levels up the call stack so attempting to take it here is an error. Moreover, it is pointless in the first place since it only protects a single, atomic assignment. Enabling lock debugging gives the following output: ============================================= [ INFO: possible recursive locking detected ] 4.4.0-rc5+ #189 Not tainted --------------------------------------------- kworker/u2:3/37 is trying to acquire lock: (&(&host->lock)->rlock){-.-...}, at: [<90283294>] sata_dwc_exec_command_by_tag.constprop.14+0x44/0x8c but task is already holding lock: (&(&host->lock)->rlock){-.-...}, at: [<902761ac>] ata_scsi_queuecmd+0x2c/0x330 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&host->lock)->rlock); lock(&(&host->lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u2:3/37: #0: ("events_unbound"){.+.+.+}, at: [<9003a0a4>] process_one_work+0x12c/0x430 #1: ((&entry->work)){+.+.+.}, at: [<9003a0a4>] process_one_work+0x12c/0x430 #2: (&bdev->bd_mutex){+.+.+.}, at: [<9011fd54>] __blkdev_get+0x50/0x380 #3: (&(&host->lock)->rlock){-.-...}, at: [<902761ac>] ata_scsi_queuecmd+0x2c/0x330 stack backtrace: CPU: 0 PID: 37 Comm: kworker/u2:3 Not tainted 4.4.0-rc5+ #189 Workqueue: events_unbound async_run_entry_fn Stack : 90b38e30 00000021 00000003 9b2a6040 00000000 9005f3f0 904fc8dc 00000025 906b96e4 00000000 90528648 9b3336c4 904fc8dc 9009bf18 00000002 00000004 00000000 00000000 9b3336c4 9b3336e4 904fc8dc 9003d074 00000000 90500000 9005e738 00000000 00000000 00000000 00000000 00000000 00000000 00000000 6e657665 755f7374 756f626e 0000646e 00000000 00000000 9b00ca00 9b025000 ... Call Trace: [<90009d6c>] show_stack+0x88/0xa4 [<90057744>] __lock_acquire+0x1ce8/0x2154 [<900583e4>] lock_acquire+0x64/0x8c [<9045ff10>] _raw_spin_lock_irqsave+0x54/0x78 [<90283294>] sata_dwc_exec_command_by_tag.constprop.14+0x44/0x8c [<90283484>] sata_dwc_qc_issue+0x1a8/0x24c [<9026b39c>] ata_qc_issue+0x1f0/0x410 [<90273c6c>] ata_scsi_translate+0xb4/0x200 [<90276234>] ata_scsi_queuecmd+0xb4/0x330 [<9025800c>] scsi_dispatch_cmd+0xd0/0x128 [<90259934>] scsi_request_fn+0x58c/0x638 [<901a3e50>] __blk_run_queue+0x40/0x5c [<901a83d4>] blk_queue_bio+0x27c/0x28c [<901a5914>] generic_make_request+0xf0/0x188 [<901a5a54>] submit_bio+0xa8/0x194 [<9011adcc>] submit_bh_wbc.isra.23+0x15c/0x17c [<9011c908>] block_read_full_page+0x3e4/0x428 [<9009e2e0>] do_read_cache_page+0xac/0x210 [<9009fd90>] read_cache_page+0x18/0x24 [<901bbd18>] read_dev_sector+0x38/0xb0 [<901bd174>] msdos_partition+0xb4/0x5c0 [<901bcb8c>] check_partition+0x140/0x274 [<901bba60>] rescan_partitions+0xa0/0x2b0 [<9011ff68>] __blkdev_get+0x264/0x380 [<901201ac>] blkdev_get+0x128/0x36c [<901b9378>] add_disk+0x3c0/0x4bc [<90268268>] sd_probe_async+0x100/0x224 [<90043a44>] async_run_entry_fn+0x50/0x124 [<9003a11c>] process_one_work+0x1a4/0x430 [<9003a4f4>] worker_thread+0x14c/0x4fc [<900408f4>] kthread+0xd0/0xe8 [<90004338>] ret_from_kernel_thread+0x14/0x1c Fixes: 62936009f35a ("[libata] Add 460EX on-chip SATA driver, sata_dwc_460ex") Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09libata: support host-aware and host-managed ZAC devicesHannes Reinecke
Byte 69 bits 0:1 in the IDENTIFY DEVICE data indicate a host-aware ZAC device. Host-managed ZAC devices have their own individual signature, and to not set the bits in the IDENTIFY DEVICE data. And whenever we detect a ZAC-compatible device we should be displaying the zoned block characteristics VPD page. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09libata: support device-managed ZAC devicesHannes Reinecke
Device-managed ZAC devices just set the zoned capabilities field in INQUIRY byte 69 (cf ACS-4). This corresponds to the 'zoned' field in the block device characteristics VPD page. As this is only defined in SPC-5/SBC-4 we also need to update the supported SCSI version descriptor. Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Tested-by: Shaun Tancheff <shaun.tancheff@seagate.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09libata: NCQ encapsulation for ZAC MANAGEMENT OUTHannes Reinecke
Add NCQ encapsulation for ZAC MANAGEMENT OUT and evaluate NCQ Non-Data log pages to figure out if NCQ encapsulation is supported. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09libata: Implement ZBC OUT translationHannes Reinecke
ZAC drives implement a 'ZAC Management Out' command template, which maps onto the ZBC OUT command. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09libata: implement ZBC IN translationHannes Reinecke
ZAC drives implement a 'ZAC Management In' command template, which maps onto the ZBC IN command. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09libata-scsi: Generate sense code for disabled devicesHannes Reinecke
If a device is disabled after error recovery it doesn't make any sense to generate an ATA sense, but we should rather return a generic sense code indicating the device is gone. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09libata-trace: decode subcommandsHannes Reinecke
Some commands like FPDMA RECEIVE or NCQ NON DATA can encapsulate other commands to NCQ transport. So decode the subcmds, too. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09libata: Check log page directory before accessing pagesHannes Reinecke
When reading the NCQ Send/Recv log it might actually not supported, thereby causing irritating messages 'READ LOG DMA EXT failed'. Instead we should be reading the log directory first to figure out if the log is actually supported before trying to access it. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09libata: Separate out ata_dev_config_ncq_send_recv()Hannes Reinecke
Move NCQ SEND/RECEIVE checks into a separate function. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09libata: do not attempt to retrieve sense code twiceHannes Reinecke
Do not call ata_request_sense() if the sense code is already present. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09Merge branch '4.7/scsi-queue' of ↵Tejun Heo
git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi into for-4.7-zac Pulling in the dependencies for further ZAC changes. Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09libata-scsi: use %*ph to dump small buffersAndy Shevchenko
Replace custom approach by %*ph specifier to dump small buffers in hex format. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-02dmaengine: dw: pass platform data via struct dw_dma_chipAndy Shevchenko
We pass struct dw_dma_chip to dw_dma_probe() anyway, thus we may use it to pass a platform data as well. While here, constify the source of the platform data. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-15scsi: rename SCSI_MAX_{SG, SG_CHAIN}_SEGMENTSMing Lin
Rename SCSI_MAX_SG_SEGMENTS to SG_CHUNK_SIZE, which means the amount we fit into a single scatterlist chunk. Rename SCSI_MAX_SG_CHAIN_SEGMENTS to SG_MAX_SEGMENTS. Will move these 2 generic definitions to scatterlist.h later. Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Bart Van Assche <bart.vanassche@sandisk.com> (for ib_srp changes) Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-13ata: add AMD Seattle platform driverBrijesh Singh
AMD Seattle SATA controller mostly conforms to AHCI interface with some special register to control SGPIO interface. In the case of an AHCI controller, the SGPIO feature is ideally implemented using the "Enclosure Management" register of the AHCI controller, but those registeres are not implemented in the Seattle SoC. Instead SoC (Rev B0 onwards) provides a 32-bit SGPIO control register which should be programmed to control the activity, locate and fault LEDs. The driver is based on ahci_platform driver. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Acked-by: Hans de Goede <hdegoede@redhat.com> CC: tj@kernel.org CC: linux-ide@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-13treewide: Fix typos in libata.xmlMasanari Iida
This patch fix spelling typos found in Documentation/Docbook/libata.xml. It is because the file was generated from comments in source, I had to fix comments in libata-core.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-13dmaengine: dw: rename masters to reflect actual topologyAndy Shevchenko
The source and destination masters are reflecting buses or their layers to where the different devices can be connected. The patch changes the master names to reflect which one is related to which independently on the transfer direction. The outcome of the change is that the memory data width is now always limited by a data width of the master which is dedicated to communicate to memory. The patch will not break anything since all current users have the same data width for all masters. Though it would be nice to revisit avr32 platforms to check what is the actual hardware topology in use there. It seems that it has one bus and two masters on it as stated by Table 8-2, that's why everything works independently on the master in use. The purpose of the sequential patch is to fix the driver for configuration of more than one bus. The change is done in the assumption that src_master and dst_master are reflecting a connection to the memory and peripheral correspondently on avr32 and otherwise on the rest. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-04libata-core: Allow longer timeout for drive spinup from PUISDamien Le Moal
When spinning up a drive from powered on standby mode (PUIS), SETFEATURES_SPINUP is executed with the default timeout used for any SETFEATURES subcommand, that is 5+10 seconds. The total 15s is too short for some drives to complete spinup (e.g. drives with a large indirection table stored on media), resulting in ata_dev_read_id to fail twice on the execution of SETFEATURES_SPINUP. For this feature, allow a larger default timeout of 30 seconds. However, in the same spirit as with the timeout of other feature subcommands, do not ignore ata_probe_timeout if it is set). Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-04libata-scsi: Set information sense field for invalid parameterHannes Reinecke
Whenever the sense key is set to 'invalid parameter' we should be filling out the sense-key specific information field in the sense buffer. tj: Added description of @fp for ata_mselect_*(). Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-04libata-scsi: set bit pointer for sense code informationHannes Reinecke
When generating a sense code of 'Invalid field in CDB' we should be setting the bit pointer where appropriate. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-04libata-scsi: Set field pointer in sense codeHannes Reinecke
If the sense code is 'Invalid field in CDB' we should be setting the field pointer to the offending byte. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>