blob: 7b1f29b7e67ee4067e13370949187d3263b25181 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
|
metadata:
name: serial-console
format: "Manual Test Definition 1.0"
description: "Test if the serial connection to the board works"
maintainer:
- amit.khare@linaro.org
os:
- android
- ubuntu
- openembedded
scope:
- functional
devices:
- panda
- panda-es
- vexpress-a9
- vexpress-tc2
- juno
- arndale
- ifc6410
- hi6220-hikey
- apq8016-sbc
environment:
- manual-test
run:
steps:
# depending on the board, the serial cable might be UART or symmetric serial
- Connect the serial cable to the device under test
- Launch minicom in terminal of host PC.
# correct tty should be used. /dev/ttyUSB0 is just an example
- "$ minicom -D /dev/ttyUSB0 -w -C minicom_log.txt"
- Power the device under test
- After boot sequence is complete run the following command in the console
- "$ ls -l"
expected:
- Boot log is displayed in minicom after powering the device under test
- Command line prompt is displayed after successful boot.
- Input by keyboard in works and characters are echoed back and displayed in minicom
|