Merge remote-tracking branch 'sa8155p-adp-dts-drivers/tracking-qcomlt-sa8155p-dts-drivers' into integration-linux-qcomlt

8 files changed, 343 insertions, 21 deletions

diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
index 98d89e53013d..bd3539644d3f 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
@@ -21,6 +21,7 @@ Properties:
 		    - "qcom,sc7180-pdc": For SC7180
 		    - "qcom,sc7280-pdc": For SC7280
 		    - "qcom,sdm845-pdc": For SDM845
+		    - "qcom,sdm8150-pdc": For SM8150
 		    - "qcom,sdm8250-pdc": For SM8250
 		    - "qcom,sdm8350-pdc": For SM8350
 
diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.txt b/Documentation/devicetree/bindings/net/qcom,ethqos.txt
index fcf5035810b5..1f5746849a71 100644
--- a/Documentation/devicetree/bindings/net/qcom,ethqos.txt
+++ b/Documentation/devicetree/bindings/net/qcom,ethqos.txt
@@ -7,7 +7,9 @@ This device has following properties:
 
 Required properties:
 
-- compatible: Should be qcom,qcs404-ethqos"
+- compatible: Should be one of:
+		"qcom,qcs404-ethqos"
+		"qcom,sm8150-ethqos"
 
 - reg: Address and length of the register set for the device
 
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 8756c2b25c7e..474f688f14a2 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -47,6 +47,65 @@
 
 		vin-supply = <&vreg_3p3>;
 	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xC>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+		snps,tx-sched-wrr;
+
+		queue0 {
+			snps,weight = <0x10>;
+			snps,dcb-algorithm;
+			snps,priority = <0x0>;
+		};
+
+		queue1 {
+			snps,weight = <0x11>;
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue2 {
+			snps,weight = <0x12>;
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue3 {
+			snps,weight = <0x13>;
+			snps,dcb-algorithm;
+			snps,priority = <0x3>;
+		};
+	};
 };
 
 &apps_rsc {
@@ -317,6 +376,42 @@
 	firmware-name = "qcom/sa8155p/cdsp.mdt";
 };
 
+&ethernet {
+	status = "okay";
+
+	snps,reset-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 11000 70000>;
+
+	snps,ptp-ref-clk-rate = <250000000>;
+	snps,ptp-req-clk-rate = <96000000>;
+
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_defaults>;
+
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii";
+	mdio {
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+
+		compatible = "snps,dwmac-mdio";
+
+		/* Micrel KSZ9031RNZ PHY */
+		rgmii_phy: phy@7 {
+			reg = <0x7>;
+
+			interrupt-parent = <&tlmm>;
+			interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; /* phy intr */
+			device_type = "ethernet-phy";
+			compatible = "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
+
 &uart2 {
 	status = "okay";
 };
@@ -407,4 +502,53 @@
 			drive-strength = <2>;
 		};
 	};
+
+	ethernet_defaults: ethernet-defaults {
+		mdc {
+			pins = "gpio7";
+			function = "rgmii";
+			bias-pull-up;
+		};
+
+		mdio {
+			pins = "gpio59";
+			function = "rgmii";
+			bias-pull-up;
+		};
+
+		rgmii-rx {
+			pins = "gpio117", "gpio118", "gpio119", "gpio120", "gpio115", "gpio116";
+			function = "rgmii";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		rgmii-tx {
+			pins = "gpio122", "gpio4", "gpio5", "gpio6", "gpio114", "gpio121";
+			function = "rgmii";
+			bias-pull-up;
+			drive-strength = <16>;
+		};
+
+		phy-intr {
+			pins = "gpio124";
+			function = "emac_phy";
+			bias-disable;
+			drive-strength = <8>;
+		};
+
+		pps {
+			pins = "gpio81";
+			function = "emac_pps";
+			bias-disable;
+			drive-strength = <8>;
+		};
+
+		phy-reset {
+			pins = "gpio79";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <16>;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 6012322a5984..70cf4651598a 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -915,6 +915,33 @@
 			status = "disabled";
 		};
 
+		ethernet: ethernet@20000 {
+			compatible = "qcom,sm8150-ethqos";
+			reg = <0x0 0x00020000 0x0 0x10000>,
+			      <0x0 0x00036000 0x0 0x100>;
+			reg-names = "stmmaceth", "rgmii";
+			clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
+			clocks = <&gcc GCC_EMAC_AXI_CLK>,
+				<&gcc GCC_EMAC_SLV_AHB_CLK>,
+				<&gcc GCC_EMAC_PTP_CLK>,
+				<&gcc GCC_EMAC_RGMII_CLK>;
+			interrupts = <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_lpi";
+
+			power-domains = <&gcc EMAC_GDSC>;
+			resets = <&gcc GCC_EMAC_BCR>;
+
+			iommus = <&apps_smmu 0x3C0 0x0>;
+
+			snps,tso;
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <4096>;
+
+			status = "disabled";
+		};
+
+
 		qupv3_id_0: geniqup@8c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x008c0000 0x0 0x6000>;
@@ -1626,6 +1653,16 @@
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8150-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x400>, <0 0x17c000f0 0 0x60>;
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
+					  <125 63 1>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
 		ufs_mem_hc: ufshc@1d84000 {
 			compatible = "qcom,sm8150-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
@@ -1637,6 +1674,8 @@
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
 			resets = <&gcc GCC_UFS_PHY_BCR>;
 			reset-names = "rst";
 
@@ -1687,6 +1726,9 @@
 			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 
+			power-domains = <&gcc UFS_CARD_GDSC>,
+					<&gcc UFS_PHY_GDSC>;
+			power-domain-names = "ufs_card_gdsc", "ufs_phy_gdsc";
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 			status = "disabled";
@@ -1927,6 +1969,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			wakeup-parent = <&pdc>;
 
 			qup_i2c0_default: qup-i2c0-default {
 				mux {
diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c
index 245794485719..fd7e931d3c09 100644
--- a/drivers/clk/qcom/gcc-sm8150.c
+++ b/drivers/clk/qcom/gcc-sm8150.c
@@ -5,6 +5,7 @@
 #include <linux/bitops.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -3448,22 +3449,71 @@ static struct clk_branch gcc_video_xo_clk = {
 	},
 };
 
+/* To Do: EMAC GDSC currently has issues when its turn'ed ON, once
+ * its already in OFF state. So use PWRSTS_ON state (only) as a
+ * workaround for now.
+ */
+static struct gdsc emac_gdsc = {
+	.gdscr = 0x6004,
+	.pd = {
+		.name = "emac_gdsc",
+	},
+	.pwrsts = PWRSTS_ON,
+	.flags = POLL_CFG_GDSCR,
+};
+
+static struct gdsc pcie_0_gdsc = {
+	.gdscr = 0x6b004,
+	.pd = {
+		.name = "pcie_0_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = POLL_CFG_GDSCR,
+};
+
+static struct gdsc pcie_1_gdsc = {
+	.gdscr = 0x8d004,
+	.pd = {
+		.name = "pcie_1_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = POLL_CFG_GDSCR,
+};
+
+static struct gdsc ufs_card_gdsc = {
+	.gdscr = 0x75004,
+	.pd = {
+		.name = "ufs_card_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = POLL_CFG_GDSCR,
+};
+
+static struct gdsc ufs_phy_gdsc = {
+	.gdscr = 0x77004,
+	.pd = {
+		.name = "ufs_phy_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = POLL_CFG_GDSCR,
+};
+
 static struct gdsc usb30_prim_gdsc = {
-		.gdscr = 0xf004,
-		.pd = {
-			.name = "usb30_prim_gdsc",
-		},
-		.pwrsts = PWRSTS_OFF_ON,
-		.flags = POLL_CFG_GDSCR,
+	.gdscr = 0xf004,
+	.pd = {
+		.name = "usb30_prim_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = POLL_CFG_GDSCR,
 };
 
 static struct gdsc usb30_sec_gdsc = {
-		.gdscr = 0x10004,
-		.pd = {
-			.name = "usb30_sec_gdsc",
-		},
-		.pwrsts = PWRSTS_OFF_ON,
-		.flags = POLL_CFG_GDSCR,
+	.gdscr = 0x10004,
+	.pd = {
+		.name = "usb30_sec_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = POLL_CFG_GDSCR,
 };
 
 static struct clk_regmap *gcc_sm8150_clocks[] = {
@@ -3714,6 +3764,11 @@ static const struct qcom_reset_map gcc_sm8150_resets[] = {
 };
 
 static struct gdsc *gcc_sm8150_gdscs[] = {
+	[EMAC_GDSC] = &emac_gdsc,
+	[PCIE_0_GDSC] = &pcie_0_gdsc,
+	[PCIE_1_GDSC] = &pcie_1_gdsc,
+	[UFS_CARD_GDSC] = &ufs_card_gdsc,
+	[UFS_PHY_GDSC] = &ufs_phy_gdsc,
 	[USB30_PRIM_GDSC] = &usb30_prim_gdsc,
 	[USB30_SEC_GDSC] = &usb30_sec_gdsc,
 };
@@ -3742,19 +3797,41 @@ static const struct of_device_id gcc_sm8150_match_table[] = {
 };
 MODULE_DEVICE_TABLE(of, gcc_sm8150_match_table);
 
+static void gcc_sm8150_pm_runtime_disable(void *data)
+{
+	pm_runtime_disable(data);
+}
+
 static int gcc_sm8150_probe(struct platform_device *pdev)
 {
 	struct regmap *regmap;
+	int ret;
+
+	pm_runtime_enable(&pdev->dev);
+
+	ret = devm_add_action_or_reset(&pdev->dev, gcc_sm8150_pm_runtime_disable, &pdev->dev);
+	if (ret)
+		return ret;
+
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret)
+		return ret;
 
 	regmap = qcom_cc_map(pdev, &gcc_sm8150_desc);
-	if (IS_ERR(regmap))
+	if (IS_ERR(regmap)) {
+		pm_runtime_put(&pdev->dev);
 		return PTR_ERR(regmap);
+	}
 
 	/* Disable the GPLL0 active input to NPU and GPU via MISC registers */
 	regmap_update_bits(regmap, 0x4d110, 0x3, 0x3);
 	regmap_update_bits(regmap, 0x71028, 0x3, 0x3);
 
-	return qcom_cc_really_probe(pdev, &gcc_sm8150_desc, regmap);
+	ret = qcom_cc_really_probe(pdev, &gcc_sm8150_desc, regmap);
+
+	pm_runtime_put(&pdev->dev);
+
+	return ret;
 }
 
 static struct platform_driver gcc_sm8150_driver = {
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 2ffa0a11eea5..0cc28c79cc61 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -78,6 +78,7 @@ struct ethqos_emac_por {
 struct ethqos_emac_driver_data {
 	const struct ethqos_emac_por *por;
 	unsigned int num_por;
+	bool rgmii_config_looback_en;
 };
 
 struct qcom_ethqos {
@@ -90,6 +91,7 @@ struct qcom_ethqos {
 
 	const struct ethqos_emac_por *por;
 	unsigned int num_por;
+	bool rgmii_config_looback_en;
 };
 
 static int rgmii_readl(struct qcom_ethqos *ethqos, unsigned int offset)
@@ -181,6 +183,22 @@ static const struct ethqos_emac_por emac_v2_3_0_por[] = {
 static const struct ethqos_emac_driver_data emac_v2_3_0_data = {
 	.por = emac_v2_3_0_por,
 	.num_por = ARRAY_SIZE(emac_v2_3_0_por),
+	.rgmii_config_looback_en = true,
+};
+
+static const struct ethqos_emac_por emac_v2_1_0_por[] = {
+	{ .offset = RGMII_IO_MACRO_CONFIG,	.value = 0x40C01343 },
+	{ .offset = SDCC_HC_REG_DLL_CONFIG,	.value = 0x2004642C },
+	{ .offset = SDCC_HC_REG_DDR_CONFIG,	.value = 0x00000000 },
+	{ .offset = SDCC_HC_REG_DLL_CONFIG2,	.value = 0x00200000 },
+	{ .offset = SDCC_USR_CTL,		.value = 0x00010800 },
+	{ .offset = RGMII_IO_MACRO_CONFIG2,	.value = 0x00002060 },
+};
+
+static const struct ethqos_emac_driver_data emac_v2_1_0_data = {
+	.por = emac_v2_1_0_por,
+	.num_por = ARRAY_SIZE(emac_v2_1_0_por),
+	.rgmii_config_looback_en = false,
 };
 
 static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
@@ -297,8 +315,12 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos)
 		rgmii_updatel(ethqos, SDCC_DDR_CONFIG_PRG_DLY_EN,
 			      SDCC_DDR_CONFIG_PRG_DLY_EN,
 			      SDCC_HC_REG_DDR_CONFIG);
-		rgmii_updatel(ethqos, RGMII_CONFIG_LOOPBACK_EN,
-			      RGMII_CONFIG_LOOPBACK_EN, RGMII_IO_MACRO_CONFIG);
+		if (ethqos->rgmii_config_looback_en)
+			rgmii_updatel(ethqos, RGMII_CONFIG_LOOPBACK_EN,
+				      RGMII_CONFIG_LOOPBACK_EN, RGMII_IO_MACRO_CONFIG);
+		else
+			rgmii_updatel(ethqos, RGMII_CONFIG_LOOPBACK_EN,
+				      0, RGMII_IO_MACRO_CONFIG);
 		break;
 
 	case SPEED_100:
@@ -331,8 +353,13 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos)
 		rgmii_updatel(ethqos, SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_EN,
 			      SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_EN,
 			      SDCC_HC_REG_DDR_CONFIG);
-		rgmii_updatel(ethqos, RGMII_CONFIG_LOOPBACK_EN,
-			      RGMII_CONFIG_LOOPBACK_EN, RGMII_IO_MACRO_CONFIG);
+		if (ethqos->rgmii_config_looback_en)
+			rgmii_updatel(ethqos, RGMII_CONFIG_LOOPBACK_EN,
+				      RGMII_CONFIG_LOOPBACK_EN, RGMII_IO_MACRO_CONFIG);
+		else
+			rgmii_updatel(ethqos, RGMII_CONFIG_LOOPBACK_EN,
+				      0, RGMII_IO_MACRO_CONFIG);
+
 		break;
 
 	case SPEED_10:
@@ -504,6 +531,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	data = of_device_get_match_data(&pdev->dev);
 	ethqos->por = data->por;
 	ethqos->num_por = data->num_por;
+	ethqos->rgmii_config_looback_en = data->rgmii_config_looback_en;
 
 	ethqos->rgmii_clk = devm_clk_get(&pdev->dev, "rgmii");
 	if (IS_ERR(ethqos->rgmii_clk)) {
@@ -558,6 +586,7 @@ static int qcom_ethqos_remove(struct platform_device *pdev)
 
 static const struct of_device_id qcom_ethqos_match[] = {
 	{ .compatible = "qcom,qcs404-ethqos", .data = &emac_v2_3_0_data},
+	{ .compatible = "qcom,sm8150-ethqos", .data = &emac_v2_1_0_data},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, qcom_ethqos_match);
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8150.c b/drivers/pinctrl/qcom/pinctrl-sm8150.c
index 7359bae68c69..499dd05c3e3d 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm8150.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm8150.c
@@ -1500,6 +1500,25 @@ static const struct msm_pingroup sm8150_groups[] = {
 	[178] = SDC_QDSD_PINGROUP(sdc2_data, 0xB2000, 9, 0),
 };
 
+static const struct msm_gpio_wakeirq_map sm8150_pdc_map[] = {
+	{ 3, 31 }, { 5, 32 }, { 8, 33 }, { 9, 34 }, { 10, 100 },
+	{ 12, 104 }, { 24, 37 }, { 26, 38 }, { 27, 41 }, { 28, 42 },
+	{ 30, 39 }, { 36, 43 }, { 37, 44 }, { 38, 30 }, { 39, 118 },
+	{ 39, 125 }, { 41, 47 }, { 42, 48 }, { 46, 50 }, { 47, 49 },
+	{ 48, 51 }, { 49, 53 }, { 50, 52 }, { 51, 116 }, { 51, 123 },
+	{ 53, 54 }, { 54, 55 }, { 55, 56 }, { 56, 57 }, { 58, 58 },
+	{ 60, 60 }, { 61, 61 }, { 68, 62 }, { 70, 63 }, { 76, 71 },
+	{ 77, 66 }, { 81, 64 }, { 83, 65 }, { 86, 67 }, { 87, 84 },
+	{ 88, 117 }, { 88, 124 }, { 90, 69 }, { 91, 70 }, { 93, 75 },
+	{ 95, 72 }, { 96, 73 }, { 97, 74 }, { 101, 40 }, { 103, 77 },
+	{ 104, 78 }, { 108, 79 }, { 112, 80 }, { 113, 81 }, { 114, 82 },
+	{ 117, 85 }, { 118, 101 }, { 119, 87 }, { 120, 88 }, { 121, 89 },
+	{ 122, 90 }, { 123, 91 }, { 124, 92 }, { 125, 93 }, { 129, 94 },
+	{ 132, 105 }, { 133, 83 }, { 134, 36 }, { 136, 97 }, { 142, 103 },
+	{ 144, 115 }, { 144, 122 }, { 147, 102 }, { 150, 107 },
+	{ 152, 108 }, { 153, 109 }
+};
+
 static const struct msm_pinctrl_soc_data sm8150_pinctrl = {
 	.pins = sm8150_pins,
 	.npins = ARRAY_SIZE(sm8150_pins),
@@ -1510,6 +1529,8 @@ static const struct msm_pinctrl_soc_data sm8150_pinctrl = {
 	.ngpios = 176,
 	.tiles = sm8150_tiles,
 	.ntiles = ARRAY_SIZE(sm8150_tiles),
+	.wakeirq_map = sm8150_pdc_map,
+	.nwakeirq_map = ARRAY_SIZE(sm8150_pdc_map),
 };
 
 static int sm8150_pinctrl_probe(struct platform_device *pdev)
diff --git a/include/dt-bindings/clock/qcom,gcc-sm8150.h b/include/dt-bindings/clock/qcom,gcc-sm8150.h
index 3e1a91876610..35d80ae411a0 100644
--- a/include/dt-bindings/clock/qcom,gcc-sm8150.h
+++ b/include/dt-bindings/clock/qcom,gcc-sm8150.h
@@ -241,7 +241,12 @@
 #define GCC_USB_PHY_CFG_AHB2PHY_BCR				28
 
 /* GCC GDSCRs */
-#define USB30_PRIM_GDSC                     4
-#define USB30_SEC_GDSC						5
+#define EMAC_GDSC						0
+#define PCIE_0_GDSC						1
+#define	PCIE_1_GDSC						2
+#define UFS_CARD_GDSC						3
+#define UFS_PHY_GDSC						4
+#define USB30_PRIM_GDSC						5
+#define USB30_SEC_GDSC						6
 
 #endif