diff options
Diffstat (limited to 'rr-cache/51a518474b0e4eedfc647a2509ddcd50b84c4954/preimage')
-rw-r--r-- | rr-cache/51a518474b0e4eedfc647a2509ddcd50b84c4954/preimage | 190 |
1 files changed, 190 insertions, 0 deletions
diff --git a/rr-cache/51a518474b0e4eedfc647a2509ddcd50b84c4954/preimage b/rr-cache/51a518474b0e4eedfc647a2509ddcd50b84c4954/preimage new file mode 100644 index 0000000..9bcd536 --- /dev/null +++ b/rr-cache/51a518474b0e4eedfc647a2509ddcd50b84c4954/preimage @@ -0,0 +1,190 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Phy drivers for Qualcomm and Atheros platforms +# +config PHY_ATH79_USB + tristate "Atheros AR71XX/9XXX USB PHY driver" + depends on OF && (ATH79 || COMPILE_TEST) + default y if USB_EHCI_HCD_PLATFORM || USB_OHCI_HCD_PLATFORM + select RESET_CONTROLLER + select GENERIC_PHY + help + Enable this to support the USB PHY on Atheros AR71XX/9XXX SoCs. + +config PHY_QCOM_APQ8064_SATA + tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" + depends on ARCH_QCOM + depends on HAS_IOMEM + depends on OF + select GENERIC_PHY + +config PHY_QCOM_EDP + tristate "Qualcomm eDP PHY driver" + depends on ARCH_QCOM || COMPILE_TEST + depends on OF + depends on COMMON_CLK + select GENERIC_PHY + help + Enable this driver to support the Qualcomm eDP PHY found in various + Qualcomm chipsets. + +config PHY_QCOM_IPQ4019_USB + tristate "Qualcomm IPQ4019 USB PHY driver" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s. + +config PHY_QCOM_IPQ806X_SATA + tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" + depends on ARCH_QCOM + depends on HAS_IOMEM + depends on OF + select GENERIC_PHY + +config PHY_QCOM_PCIE2 + tristate "Qualcomm PCIe Gen2 PHY Driver" + depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + Enable this to support the Qualcomm PCIe PHY, used with the Synopsys + based PCIe controller. + +menuconfig PHY_QCOM_QMP + tristate "Qualcomm QMP PHY Drivers" + depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) + +if PHY_QCOM_QMP + +config PHY_QCOM_QMP_COMBO + tristate "Qualcomm QMP Combo PHY Driver" + default PHY_QCOM_QMP + select GENERIC_PHY + select MFD_SYSCON + help + Enable this to support the QMP Combo PHY transceiver that is used + with USB3 and DisplayPort controllers on Qualcomm chips. + +config PHY_QCOM_QMP_PCIE + tristate "Qualcomm QMP PCIe PHY Driver" + depends on PCI || COMPILE_TEST + select GENERIC_PHY + default PHY_QCOM_QMP + help + Enable this to support the QMP PCIe PHY transceiver that is used + with PCIe controllers on Qualcomm chips. + +config PHY_QCOM_QMP_PCIE_8996 + tristate "Qualcomm QMP PCIe 8996 PHY Driver" + depends on PCI || COMPILE_TEST + select GENERIC_PHY + default PHY_QCOM_QMP + help + Enable this to support the QMP PCIe PHY transceiver that is used + with PCIe controllers on Qualcomm msm8996 chips. + +config PHY_QCOM_QMP_UFS + tristate "Qualcomm QMP UFS PHY Driver" + select GENERIC_PHY + default PHY_QCOM_QMP + help + Enable this to support the QMP UFS PHY transceiver that is used + with UFS controllers on Qualcomm chips. + +config PHY_QCOM_QMP_USB + tristate "Qualcomm QMP USB PHY Driver" + select GENERIC_PHY + default PHY_QCOM_QMP + help + Enable this to support the QMP USB PHY transceiver that is used + with USB3 controllers on Qualcomm chips. + +endif # PHY_QCOM_QMP + +config PHY_QCOM_QUSB2 + tristate "Qualcomm QUSB2 PHY Driver" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + depends on NVMEM || !NVMEM + select GENERIC_PHY + help + Enable this to support the HighSpeed QUSB2 PHY transceiver for USB + controllers on Qualcomm chips. This driver supports the high-speed + PHY which is usually paired with either the ChipIdea or Synopsys DWC3 + USB IPs on MSM SOCs. + +config PHY_QCOM_SNPS_EUSB2 + tristate "Qualcomm SNPS eUSB2 PHY Driver" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + Enable support for the USB high-speed SNPS eUSB2 phy on Qualcomm + chipsets. The PHY is paired with a Synopsys DWC3 USB controller + on Qualcomm SOCs. + +<<<<<<< +======= +config PHY_QCOM_EUSB2_REPEATER + tristate "Qualcomm SNPS eUSB2 Repeater Driver" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + Enable support for the USB high-speed SNPS eUSB2 repeater on Qualcomm + PMICs. The repeater is paired with a Synopsys eUSB2 Phy + on Qualcomm SOCs. + +>>>>>>> +config PHY_QCOM_USB_HS + tristate "Qualcomm USB HS PHY module" + depends on USB_ULPI_BUS + depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in + select GENERIC_PHY + help + Support for the USB high-speed ULPI compliant phy on Qualcomm + chipsets. + +config PHY_QCOM_USB_SNPS_FEMTO_V2 + tristate "Qualcomm SNPS FEMTO USB HS PHY V2 module" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + Enable support for the USB high-speed SNPS Femto phy on Qualcomm + chipsets. This PHY has differences in the register map compared + to the V1 variants. The PHY is paired with a Synopsys DWC3 USB + controller on Qualcomm SOCs. + +config PHY_QCOM_USB_HSIC + tristate "Qualcomm USB HSIC ULPI PHY module" + depends on USB_ULPI_BUS + select GENERIC_PHY + help + Support for the USB HSIC ULPI compliant PHY on QCOM chipsets. + +config PHY_QCOM_USB_HS_28NM + tristate "Qualcomm 28nm High-Speed PHY" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in + select GENERIC_PHY + help + Enable this to support the Qualcomm Synopsys DesignWare Core 28nm + High-Speed PHY driver. This driver supports the Hi-Speed PHY which + is usually paired with either the ChipIdea or Synopsys DWC3 USB + IPs on MSM SOCs. + +config PHY_QCOM_USB_SS + tristate "Qualcomm USB Super-Speed PHY driver" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in + select GENERIC_PHY + help + Enable this to support the Super-Speed USB transceiver on various + Qualcomm chipsets. + +config PHY_QCOM_IPQ806X_USB + tristate "Qualcomm IPQ806x DWC3 USB PHY driver" + depends on HAS_IOMEM + depends on OF && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + This option enables support for the Synopsis PHYs present inside the + Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports + both HS and SS PHY controllers. |