New rr-cache entries from ci-merge

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

1 files changed, 7537 insertions, 0 deletions

diff --git a/rr-cache/8c2b8bf507854aaf7c7a64fde16df892d508760f/postimage b/rr-cache/8c2b8bf507854aaf7c7a64fde16df892d508760f/postimage
new file mode 100644
index 0000000..f0be065
--- /dev/null
+++ b/rr-cache/8c2b8bf507854aaf7c7a64fde16df892d508760f/postimage
@@ -0,0 +1,7537 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*******************************************************************************
+  This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers.
+  ST Ethernet IPs are built around a Synopsys IP Core.
+
+	Copyright(C) 2007-2011 STMicroelectronics Ltd
+
+
+  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+
+  Documentation available at:
+	http://www.stlinux.com
+  Support available at:
+	https://bugzilla.stlinux.com/
+*******************************************************************************/
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/if_ether.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/if.h>
+#include <linux/if_vlan.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/prefetch.h>
+#include <linux/pinctrl/consumer.h>
+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#endif /* CONFIG_DEBUG_FS */
+#include <linux/net_tstamp.h>
+#include <linux/phylink.h>
+#include <linux/udp.h>
+#include <linux/bpf_trace.h>
+#include <net/pkt_cls.h>
+#include <net/xdp_sock_drv.h>
+#include "stmmac_ptp.h"
+#include "stmmac.h"
+#include "stmmac_xdp.h"
+#include <linux/reset.h>
+#include <linux/of_mdio.h>
+#include "dwmac1000.h"
+#include "dwxgmac2.h"
+#include "hwif.h"
+
+/* As long as the interface is active, we keep the timestamping counter enabled
+ * with fine resolution and binary rollover. This avoid non-monotonic behavior
+ * (clock jumps) when changing timestamping settings at runtime.
+ */
+#define STMMAC_HWTS_ACTIVE	(PTP_TCR_TSENA | PTP_TCR_TSCFUPDT | \
+				 PTP_TCR_TSCTRLSSR)
+
+#define	STMMAC_ALIGN(x)		ALIGN(ALIGN(x, SMP_CACHE_BYTES), 16)
+#define	TSO_MAX_BUFF_SIZE	(SZ_16K - 1)
+
+/* Module parameters */
+#define TX_TIMEO	5000
+static int watchdog = TX_TIMEO;
+module_param(watchdog, int, 0644);
+MODULE_PARM_DESC(watchdog, "Transmit timeout in milliseconds (default 5s)");
+
+static int debug = -1;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Message Level (-1: default, 0: no output, 16: all)");
+
+static int phyaddr = -1;
+module_param(phyaddr, int, 0444);
+MODULE_PARM_DESC(phyaddr, "Physical device address");
+
+#define STMMAC_TX_THRESH(x)	((x)->dma_tx_size / 4)
+#define STMMAC_RX_THRESH(x)	((x)->dma_rx_size / 4)
+
+/* Limit to make sure XDP TX and slow path can coexist */
+#define STMMAC_XSK_TX_BUDGET_MAX	256
+#define STMMAC_TX_XSK_AVAIL		16
+#define STMMAC_RX_FILL_BATCH		16
+
+#define STMMAC_XDP_PASS		0
+#define STMMAC_XDP_CONSUMED	BIT(0)
+#define STMMAC_XDP_TX		BIT(1)
+#define STMMAC_XDP_REDIRECT	BIT(2)
+
+static int flow_ctrl = FLOW_AUTO;
+module_param(flow_ctrl, int, 0644);
+MODULE_PARM_DESC(flow_ctrl, "Flow control ability [on/off]");
+
+static int pause = PAUSE_TIME;
+module_param(pause, int, 0644);
+MODULE_PARM_DESC(pause, "Flow Control Pause Time");
+
+#define TC_DEFAULT 64
+static int tc = TC_DEFAULT;
+module_param(tc, int, 0644);
+MODULE_PARM_DESC(tc, "DMA threshold control value");
+
+#define	DEFAULT_BUFSIZE	1536
+static int buf_sz = DEFAULT_BUFSIZE;
+module_param(buf_sz, int, 0644);
+MODULE_PARM_DESC(buf_sz, "DMA buffer size");
+
+#define	STMMAC_RX_COPYBREAK	256
+
+static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
+				      NETIF_MSG_LINK | NETIF_MSG_IFUP |
+				      NETIF_MSG_IFDOWN | NETIF_MSG_TIMER);
+
+#define STMMAC_DEFAULT_LPI_TIMER	1000
+static int eee_timer = STMMAC_DEFAULT_LPI_TIMER;
+module_param(eee_timer, int, 0644);
+MODULE_PARM_DESC(eee_timer, "LPI tx expiration time in msec");
+#define STMMAC_LPI_T(x) (jiffies + usecs_to_jiffies(x))
+
+/* By default the driver will use the ring mode to manage tx and rx descriptors,
+ * but allow user to force to use the chain instead of the ring
+ */
+static unsigned int chain_mode;
+module_param(chain_mode, int, 0444);
+MODULE_PARM_DESC(chain_mode, "To use chain instead of ring mode");
+
+static irqreturn_t stmmac_interrupt(int irq, void *dev_id);
+/* For MSI interrupts handling */
+static irqreturn_t stmmac_mac_interrupt(int irq, void *dev_id);
+static irqreturn_t stmmac_safety_interrupt(int irq, void *dev_id);
+static irqreturn_t stmmac_msi_intr_tx(int irq, void *data);
+static irqreturn_t stmmac_msi_intr_rx(int irq, void *data);
+static void stmmac_tx_timer_arm(struct stmmac_priv *priv, u32 queue);
+static void stmmac_flush_tx_descriptors(struct stmmac_priv *priv, int queue);
+static void stmmac_set_dma_operation_mode(struct stmmac_priv *priv, u32 txmode,
+					  u32 rxmode, u32 chan);
+
+#ifdef CONFIG_DEBUG_FS
+static const struct net_device_ops stmmac_netdev_ops;
+static void stmmac_init_fs(struct net_device *dev);
+static void stmmac_exit_fs(struct net_device *dev);
+#endif
+
+#define STMMAC_COAL_TIMER(x) (ns_to_ktime((x) * NSEC_PER_USEC))
+
+int stmmac_bus_clks_config(struct stmmac_priv *priv, bool enabled)
+{
+	int ret = 0;
+
+	if (enabled) {
+		ret = clk_prepare_enable(priv->plat->stmmac_clk);
+		if (ret)
+			return ret;
+		ret = clk_prepare_enable(priv->plat->pclk);
+		if (ret) {
+			clk_disable_unprepare(priv->plat->stmmac_clk);
+			return ret;
+		}
+		if (priv->plat->clks_config) {
+			ret = priv->plat->clks_config(priv->plat->bsp_priv, enabled);
+			if (ret) {
+				clk_disable_unprepare(priv->plat->stmmac_clk);
+				clk_disable_unprepare(priv->plat->pclk);
+				return ret;
+			}
+		}
+	} else {
+		clk_disable_unprepare(priv->plat->stmmac_clk);
+		clk_disable_unprepare(priv->plat->pclk);
+		if (priv->plat->clks_config)
+			priv->plat->clks_config(priv->plat->bsp_priv, enabled);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(stmmac_bus_clks_config);
+
+/**
+ * stmmac_verify_args - verify the driver parameters.
+ * Description: it checks the driver parameters and set a default in case of
+ * errors.
+ */
+static void stmmac_verify_args(void)
+{
+	if (unlikely(watchdog < 0))
+		watchdog = TX_TIMEO;
+	if (unlikely((buf_sz < DEFAULT_BUFSIZE) || (buf_sz > BUF_SIZE_16KiB)))
+		buf_sz = DEFAULT_BUFSIZE;
+	if (unlikely(flow_ctrl > 1))
+		flow_ctrl = FLOW_AUTO;
+	else if (likely(flow_ctrl < 0))
+		flow_ctrl = FLOW_OFF;
+	if (unlikely((pause < 0) || (pause > 0xffff)))
+		pause = PAUSE_TIME;
+	if (eee_timer < 0)
+		eee_timer = STMMAC_DEFAULT_LPI_TIMER;
+}
+
+static void __stmmac_disable_all_queues(struct stmmac_priv *priv)
+{
+	u32 rx_queues_cnt = priv->plat->rx_queues_to_use;
+	u32 tx_queues_cnt = priv->plat->tx_queues_to_use;
+	u32 maxq = max(rx_queues_cnt, tx_queues_cnt);
+	u32 queue;
+
+	for (queue = 0; queue < maxq; queue++) {
+		struct stmmac_channel *ch = &priv->channel[queue];
+
+		if (stmmac_xdp_is_enabled(priv) &&
+		    test_bit(queue, priv->af_xdp_zc_qps)) {
+			napi_disable(&ch->rxtx_napi);
+			continue;
+		}
+
+		if (queue < rx_queues_cnt)
+			napi_disable(&ch->rx_napi);
+		if (queue < tx_queues_cnt)
+			napi_disable(&ch->tx_napi);
+	}
+}
+
+/**
+ * stmmac_disable_all_queues - Disable all queues
+ * @priv: driver private structure
+ */
+static void stmmac_disable_all_queues(struct stmmac_priv *priv)
+{
+	u32 rx_queues_cnt = priv->plat->rx_queues_to_use;
+	struct stmmac_rx_queue *rx_q;
+	u32 queue;
+
+	/* synchronize_rcu() needed for pending XDP buffers to drain */
+	for (queue = 0; queue < rx_queues_cnt; queue++) {
+		rx_q = &priv->rx_queue[queue];
+		if (rx_q->xsk_pool) {
+			synchronize_rcu();
+			break;
+		}
+	}
+
+	__stmmac_disable_all_queues(priv);
+}
+
+/**
+ * stmmac_enable_all_queues - Enable all queues
+ * @priv: driver private structure
+ */
+static void stmmac_enable_all_queues(struct stmmac_priv *priv)
+{
+	u32 rx_queues_cnt = priv->plat->rx_queues_to_use;
+	u32 tx_queues_cnt = priv->plat->tx_queues_to_use;
+	u32 maxq = max(rx_queues_cnt, tx_queues_cnt);
+	u32 queue;
+
+	for (queue = 0; queue < maxq; queue++) {
+		struct stmmac_channel *ch = &priv->channel[queue];
+
+		if (stmmac_xdp_is_enabled(priv) &&
+		    test_bit(queue, priv->af_xdp_zc_qps)) {
+			napi_enable(&ch->rxtx_napi);
+			continue;
+		}
+
+		if (queue < rx_queues_cnt)
+			napi_enable(&ch->rx_napi);
+		if (queue < tx_queues_cnt)
+			napi_enable(&ch->tx_napi);
+	}
+}
+
+static void stmmac_service_event_schedule(struct stmmac_priv *priv)
+{
+	if (!test_bit(STMMAC_DOWN, &priv->state) &&
+	    !test_and_set_bit(STMMAC_SERVICE_SCHED, &priv->state))
+		queue_work(priv->wq, &priv->service_task);
+}
+
+static void stmmac_global_err(struct stmmac_priv *priv)
+{
+	netif_carrier_off(priv->dev);
+	set_bit(STMMAC_RESET_REQUESTED, &priv->state);
+	stmmac_service_event_schedule(priv);
+}
+
+/**
+ * stmmac_clk_csr_set - dynamically set the MDC clock
+ * @priv: driver private structure
+ * Description: this is to dynamically set the MDC clock according to the csr
+ * clock input.
+ * Note:
+ *	If a specific clk_csr value is passed from the platform
+ *	this means that the CSR Clock Range selection cannot be
+ *	changed at run-time and it is fixed (as reported in the driver
+ *	documentation). Viceversa the driver will try to set the MDC
+ *	clock dynamically according to the actual clock input.
+ */
+static void stmmac_clk_csr_set(struct stmmac_priv *priv)
+{
+	u32 clk_rate;
+
+	clk_rate = clk_get_rate(priv->plat->stmmac_clk);
+
+	/* Platform provided default clk_csr would be assumed valid
+	 * for all other cases except for the below mentioned ones.
+	 * For values higher than the IEEE 802.3 specified frequency
+	 * we can not estimate the proper divider as it is not known
+	 * the frequency of clk_csr_i. So we do not change the default
+	 * divider.
+	 */
+	if (!(priv->clk_csr & MAC_CSR_H_FRQ_MASK)) {
+		if (clk_rate < CSR_F_35M)
+			priv->clk_csr = STMMAC_CSR_20_35M;
+		else if ((clk_rate >= CSR_F_35M) && (clk_rate < CSR_F_60M))
+			priv->clk_csr = STMMAC_CSR_35_60M;
+		else if ((clk_rate >= CSR_F_60M) && (clk_rate < CSR_F_100M))
+			priv->clk_csr = STMMAC_CSR_60_100M;
+		else if ((clk_rate >= CSR_F_100M) && (clk_rate < CSR_F_150M))
+			priv->clk_csr = STMMAC_CSR_100_150M;
+		else if ((clk_rate >= CSR_F_150M) && (clk_rate < CSR_F_250M))
+			priv->clk_csr = STMMAC_CSR_150_250M;
+		else if ((clk_rate >= CSR_F_250M) && (clk_rate <= CSR_F_300M))
+			priv->clk_csr = STMMAC_CSR_250_300M;
+	}
+
+	if (priv->plat->has_sun8i) {
+		if (clk_rate > 160000000)
+			priv->clk_csr = 0x03;
+		else if (clk_rate > 80000000)
+			priv->clk_csr = 0x02;
+		else if (clk_rate > 40000000)
+			priv->clk_csr = 0x01;
+		else
+			priv->clk_csr = 0;
+	}
+
+	if (priv->plat->has_xgmac) {
+		if (clk_rate > 400000000)
+			priv->clk_csr = 0x5;
+		else if (clk_rate > 350000000)
+			priv->clk_csr = 0x4;
+		else if (clk_rate > 300000000)
+			priv->clk_csr = 0x3;
+		else if (clk_rate > 250000000)
+			priv->clk_csr = 0x2;
+		else if (clk_rate > 150000000)
+			priv->clk_csr = 0x1;
+		else
+			priv->clk_csr = 0x0;
+	}
+}
+
+static void print_pkt(unsigned char *buf, int len)
+{
+	pr_debug("len = %d byte, buf addr: 0x%p\n", len, buf);
+	print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len);
+}
+
+static inline u32 stmmac_tx_avail(struct stmmac_priv *priv, u32 queue)
+{
+	struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
+	u32 avail;
+
+	if (tx_q->dirty_tx > tx_q->cur_tx)
+		avail = tx_q->dirty_tx - tx_q->cur_tx - 1;
+	else
+		avail = priv->dma_tx_size - tx_q->cur_tx + tx_q->dirty_tx - 1;
+
+	return avail;
+}
+
+/**
+ * stmmac_rx_dirty - Get RX queue dirty
+ * @priv: driver private structure
+ * @queue: RX queue index
+ */
+static inline u32 stmmac_rx_dirty(struct stmmac_priv *priv, u32 queue)
+{
+	struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+	u32 dirty;
+
+	if (rx_q->dirty_rx <= rx_q->cur_rx)
+		dirty = rx_q->cur_rx - rx_q->dirty_rx;
+	else
+		dirty = priv->dma_rx_size - rx_q->dirty_rx + rx_q->cur_rx;
+
+	return dirty;
+}
+
+static void stmmac_lpi_entry_timer_config(struct stmmac_priv *priv, bool en)
+{
+	int tx_lpi_timer;
+
+	/* Clear/set the SW EEE timer flag based on LPI ET enablement */
+	priv->eee_sw_timer_en = en ? 0 : 1;
+	tx_lpi_timer  = en ? priv->tx_lpi_timer : 0;
+	stmmac_set_eee_lpi_timer(priv, priv->hw, tx_lpi_timer);
+}
+
+/**
+ * stmmac_enable_eee_mode - check and enter in LPI mode
+ * @priv: driver private structure
+ * Description: this function is to verify and enter in LPI mode in case of
+ * EEE.
+ */
+static void stmmac_enable_eee_mode(struct stmmac_priv *priv)
+{
+	u32 tx_cnt = priv->plat->tx_queues_to_use;
+	u32 queue;
+
+	/* check if all TX queues have the work finished */
+	for (queue = 0; queue < tx_cnt; queue++) {
+		struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
+
+		if (tx_q->dirty_tx != tx_q->cur_tx)
+			return; /* still unfinished work */
+	}
+
+	/* Check and enter in LPI mode */
+	if (!priv->tx_path_in_lpi_mode)
+		stmmac_set_eee_mode(priv, priv->hw,
+				priv->plat->en_tx_lpi_clockgating);
+}
+
+/**
+ * stmmac_disable_eee_mode - disable and exit from LPI mode
+ * @priv: driver private structure
+ * Description: this function is to exit and disable EEE in case of
+ * LPI state is true. This is called by the xmit.
+ */
+void stmmac_disable_eee_mode(struct stmmac_priv *priv)
+{
+	if (!priv->eee_sw_timer_en) {
+		stmmac_lpi_entry_timer_config(priv, 0);
+		return;
+	}
+
+	stmmac_reset_eee_mode(priv, priv->hw);
+	del_timer_sync(&priv->eee_ctrl_timer);
+	priv->tx_path_in_lpi_mode = false;
+}
+
+/**
+ * stmmac_eee_ctrl_timer - EEE TX SW timer.
+ * @t:  timer_list struct containing private info
+ * Description:
+ *  if there is no data transfer and if we are not in LPI state,
+ *  then MAC Transmitter can be moved to LPI state.
+ */
+static void stmmac_eee_ctrl_timer(struct timer_list *t)
+{
+	struct stmmac_priv *priv = from_timer(priv, t, eee_ctrl_timer);
+
+	stmmac_enable_eee_mode(priv);
+	mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(priv->tx_lpi_timer));
+}
+
+/**
+ * stmmac_eee_init - init EEE
+ * @priv: driver private structure
+ * Description:
+ *  if the GMAC supports the EEE (from the HW cap reg) and the phy device
+ *  can also manage EEE, this function enable the LPI state and start related
+ *  timer.
+ */
+bool stmmac_eee_init(struct stmmac_priv *priv)
+{
+	int eee_tw_timer = priv->eee_tw_timer;
+
+	/* Using PCS we cannot dial with the phy registers at this stage
+	 * so we do not support extra feature like EEE.
+	 */
+	if (priv->hw->pcs == STMMAC_PCS_TBI ||
+	    priv->hw->pcs == STMMAC_PCS_RTBI)
+		return false;
+
+	/* Check if MAC core supports the EEE feature. */
+	if (!priv->dma_cap.eee)
+		return false;
+
+	mutex_lock(&priv->lock);
+
+	/* Check if it needs to be deactivated */
+	if (!priv->eee_active) {
+		if (priv->eee_enabled) {
+			netdev_dbg(priv->dev, "disable EEE\n");
+			stmmac_lpi_entry_timer_config(priv, 0);
+			del_timer_sync(&priv->eee_ctrl_timer);
+			stmmac_set_eee_timer(priv, priv->hw, 0, eee_tw_timer);
+			if (priv->hw->xpcs)
+				xpcs_config_eee(priv->hw->xpcs,
+						priv->plat->mult_fact_100ns,
+						false);
+		}
+		mutex_unlock(&priv->lock);
+		return false;
+	}
+
+	if (priv->eee_active && !priv->eee_enabled) {
+		timer_setup(&priv->eee_ctrl_timer, stmmac_eee_ctrl_timer, 0);
+		stmmac_set_eee_timer(priv, priv->hw, STMMAC_DEFAULT_LIT_LS,
+				     eee_tw_timer);
+		if (priv->hw->xpcs)
+			xpcs_config_eee(priv->hw->xpcs,
+					priv->plat->mult_fact_100ns,
+					true);
+	}
+
+	if (priv->plat->has_gmac4 && priv->tx_lpi_timer <= STMMAC_ET_MAX) {
+		del_timer_sync(&priv->eee_ctrl_timer);
+		priv->tx_path_in_lpi_mode = false;
+		stmmac_lpi_entry_timer_config(priv, 1);
+	} else {
+		stmmac_lpi_entry_timer_config(priv, 0);
+		mod_timer(&priv->eee_ctrl_timer,
+			  STMMAC_LPI_T(priv->tx_lpi_timer));
+	}
+
+	mutex_unlock(&priv->lock);
+	netdev_dbg(priv->dev, "Energy-Efficient Ethernet initialized\n");
+	return true;
+}
+
+/* stmmac_get_tx_hwtstamp - get HW TX timestamps
+ * @priv: driver private structure
+ * @p : descriptor pointer
+ * @skb : the socket buffer
+ * Description :
+ * This function will read timestamp from the descriptor & pass it to stack.
+ * and also perform some sanity checks.
+ */
+static void stmmac_get_tx_hwtstamp(struct stmmac_priv *priv,
+				   struct dma_desc *p, struct sk_buff *skb)
+{
+	struct skb_shared_hwtstamps shhwtstamp;
+	bool found = false;
+	u64 ns = 0;
+
+	if (!priv->hwts_tx_en)
+		return;
+
+	/* exit if skb doesn't support hw tstamp */
+	if (likely(!skb || !(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS)))
+		return;
+
+	/* check tx tstamp status */
+	if (stmmac_get_tx_timestamp_status(priv, p)) {
+		stmmac_get_timestamp(priv, p, priv->adv_ts, &ns);
+		found = true;
+	} else if (!stmmac_get_mac_tx_timestamp(priv, priv->hw, &ns)) {
+		found = true;
+	}
+
+	if (found) {
+		ns -= priv->plat->cdc_error_adj;
+
+		memset(&shhwtstamp, 0, sizeof(struct skb_shared_hwtstamps));
+		shhwtstamp.hwtstamp = ns_to_ktime(ns);
+
+		netdev_dbg(priv->dev, "get valid TX hw timestamp %llu\n", ns);
+		/* pass tstamp to stack */
+		skb_tstamp_tx(skb, &shhwtstamp);
+	}
+}
+
+/* stmmac_get_rx_hwtstamp - get HW RX timestamps
+ * @priv: driver private structure
+ * @p : descriptor pointer
+ * @np : next descriptor pointer
+ * @skb : the socket buffer
+ * Description :
+ * This function will read received packet's timestamp from the descriptor
+ * and pass it to stack. It also perform some sanity checks.
+ */
+static void stmmac_get_rx_hwtstamp(struct stmmac_priv *priv, struct dma_desc *p,
+				   struct dma_desc *np, struct sk_buff *skb)
+{
+	struct skb_shared_hwtstamps *shhwtstamp = NULL;
+	struct dma_desc *desc = p;
+	u64 ns = 0;
+
+	if (!priv->hwts_rx_en)
+		return;
+	/* For GMAC4, the valid timestamp is from CTX next desc. */
+	if (priv->plat->has_gmac4 || priv->plat->has_xgmac)
+		desc = np;
+
+	/* Check if timestamp is available */
+	if (stmmac_get_rx_timestamp_status(priv, p, np, priv->adv_ts)) {
+		stmmac_get_timestamp(priv, desc, priv->adv_ts, &ns);
+
+		ns -= priv->plat->cdc_error_adj;
+
+		netdev_dbg(priv->dev, "get valid RX hw timestamp %llu\n", ns);
+		shhwtstamp = skb_hwtstamps(skb);
+		memset(shhwtstamp, 0, sizeof(struct skb_shared_hwtstamps));
+		shhwtstamp->hwtstamp = ns_to_ktime(ns);
+	} else  {
+		netdev_dbg(priv->dev, "cannot get RX hw timestamp\n");
+	}
+}
+
+/**
+ *  stmmac_hwtstamp_set - control hardware timestamping.
+ *  @dev: device pointer.
+ *  @ifr: An IOCTL specific structure, that can contain a pointer to
+ *  a proprietary structure used to pass information to the driver.
+ *  Description:
+ *  This function configures the MAC to enable/disable both outgoing(TX)
+ *  and incoming(RX) packets time stamping based on user input.
+ *  Return Value:
+ *  0 on success and an appropriate -ve integer on failure.
+ */
+static int stmmac_hwtstamp_set(struct net_device *dev, struct ifreq *ifr)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	struct hwtstamp_config config;
+	u32 ptp_v2 = 0;
+	u32 tstamp_all = 0;
+	u32 ptp_over_ipv4_udp = 0;
+	u32 ptp_over_ipv6_udp = 0;
+	u32 ptp_over_ethernet = 0;
+	u32 snap_type_sel = 0;
+	u32 ts_master_en = 0;
+	u32 ts_event_en = 0;
+
+	if (!(priv->dma_cap.time_stamp || priv->adv_ts)) {
+		netdev_alert(priv->dev, "No support for HW time stamping\n");
+		priv->hwts_tx_en = 0;
+		priv->hwts_rx_en = 0;
+
+		return -EOPNOTSUPP;
+	}
+
+	if (copy_from_user(&config, ifr->ifr_data,
+			   sizeof(config)))
+		return -EFAULT;
+
+	netdev_dbg(priv->dev, "%s config flags:0x%x, tx_type:0x%x, rx_filter:0x%x\n",
+		   __func__, config.flags, config.tx_type, config.rx_filter);
+
+	if (config.tx_type != HWTSTAMP_TX_OFF &&
+	    config.tx_type != HWTSTAMP_TX_ON)
+		return -ERANGE;
+
+	if (priv->adv_ts) {
+		switch (config.rx_filter) {
+		case HWTSTAMP_FILTER_NONE:
+			/* time stamp no incoming packet at all */
+			config.rx_filter = HWTSTAMP_FILTER_NONE;
+			break;
+
+		case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
+			/* PTP v1, UDP, any kind of event packet */
+			config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
+			/* 'xmac' hardware can support Sync, Pdelay_Req and
+			 * Pdelay_resp by setting bit14 and bits17/16 to 01
+			 * This leaves Delay_Req timestamps out.
+			 * Enable all events *and* general purpose message
+			 * timestamping
+			 */
+			snap_type_sel = PTP_TCR_SNAPTYPSEL_1;
+			ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
+			ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
+			break;
+
+		case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
+			/* PTP v1, UDP, Sync packet */
+			config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_SYNC;
+			/* take time stamp for SYNC messages only */
+			ts_event_en = PTP_TCR_TSEVNTENA;
+
+			ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
+			ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
+			break;
+
+		case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
+			/* PTP v1, UDP, Delay_req packet */
+			config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ;
+			/* take time stamp for Delay_Req messages only */
+			ts_master_en = PTP_TCR_TSMSTRENA;
+			ts_event_en = PTP_TCR_TSEVNTENA;
+
+			ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
+			ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
+			break;
+
+		case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
+			/* PTP v2, UDP, any kind of event packet */
+			config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT;
+			ptp_v2 = PTP_TCR_TSVER2ENA;
+			/* take time stamp for all event messages */
+			snap_type_sel = PTP_TCR_SNAPTYPSEL_1;
+
+			ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
+			ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
+			break;
+
+		case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+			/* PTP v2, UDP, Sync packet */
+			config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_SYNC;
+			ptp_v2 = PTP_TCR_TSVER2ENA;
+			/* take time stamp for SYNC messages only */
+			ts_event_en = PTP_TCR_TSEVNTENA;
+
+			ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
+			ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
+			break;
+
+		case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
+			/* PTP v2, UDP, Delay_req packet */
+			config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ;
+			ptp_v2 = PTP_TCR_TSVER2ENA;
+			/* take time stamp for Delay_Req messages only */
+			ts_master_en = PTP_TCR_TSMSTRENA;
+			ts_event_en = PTP_TCR_TSEVNTENA;
+
+			ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
+			ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
+			break;
+
+		case HWTSTAMP_FILTER_PTP_V2_EVENT:
+			/* PTP v2/802.AS1 any layer, any kind of event packet */
+			config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
+			ptp_v2 = PTP_TCR_TSVER2ENA;
+			snap_type_sel = PTP_TCR_SNAPTYPSEL_1;
+			if (priv->synopsys_id < DWMAC_CORE_4_10)
+				ts_event_en = PTP_TCR_TSEVNTENA;
+			ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
+			ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
+			ptp_over_ethernet = PTP_TCR_TSIPENA;
+			break;
+
+		case HWTSTAMP_FILTER_PTP_V2_SYNC:
+			/* PTP v2/802.AS1, any layer, Sync packet */
+			config.rx_filter = HWTSTAMP_FILTER_PTP_V2_SYNC;
+			ptp_v2 = PTP_TCR_TSVER2ENA;
+			/* take time stamp for SYNC messages only */
+			ts_event_en = PTP_TCR_TSEVNTENA;
+
+			ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
+			ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
+			ptp_over_ethernet = PTP_TCR_TSIPENA;
+			break;
+
+		case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+			/* PTP v2/802.AS1, any layer, Delay_req packet */
+			config.rx_filter = HWTSTAMP_FILTER_PTP_V2_DELAY_REQ;
+			ptp_v2 = PTP_TCR_TSVER2ENA;
+			/* take time stamp for Delay_Req messages only */
+			ts_master_en = PTP_TCR_TSMSTRENA;
+			ts_event_en = PTP_TCR_TSEVNTENA;
+
+			ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
+			ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
+			ptp_over_ethernet = PTP_TCR_TSIPENA;
+			break;
+
+		case HWTSTAMP_FILTER_NTP_ALL:
+		case HWTSTAMP_FILTER_ALL:
+			/* time stamp any incoming packet */
+			config.rx_filter = HWTSTAMP_FILTER_ALL;
+			tstamp_all = PTP_TCR_TSENALL;
+			break;
+
+		default:
+			return -ERANGE;
+		}
+	} else {
+		switch (config.rx_filter) {
+		case HWTSTAMP_FILTER_NONE:
+			config.rx_filter = HWTSTAMP_FILTER_NONE;
+			break;
+		default:
+			/* PTP v1, UDP, any kind of event packet */
+			config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
+			break;
+		}
+	}
+	priv->hwts_rx_en = ((config.rx_filter == HWTSTAMP_FILTER_NONE) ? 0 : 1);
+	priv->hwts_tx_en = config.tx_type == HWTSTAMP_TX_ON;
+
+	priv->systime_flags = STMMAC_HWTS_ACTIVE;
+
+	if (priv->hwts_tx_en || priv->hwts_rx_en) {
+		priv->systime_flags |= tstamp_all | ptp_v2 |
+				       ptp_over_ethernet | ptp_over_ipv6_udp |
+				       ptp_over_ipv4_udp | ts_event_en |
+				       ts_master_en | snap_type_sel;
+	}
+
+	stmmac_config_hw_tstamping(priv, priv->ptpaddr, priv->systime_flags);
+
+	memcpy(&priv->tstamp_config, &config, sizeof(config));
+
+	return copy_to_user(ifr->ifr_data, &config,
+			    sizeof(config)) ? -EFAULT : 0;
+}
+
+/**
+ *  stmmac_hwtstamp_get - read hardware timestamping.
+ *  @dev: device pointer.
+ *  @ifr: An IOCTL specific structure, that can contain a pointer to
+ *  a proprietary structure used to pass information to the driver.
+ *  Description:
+ *  This function obtain the current hardware timestamping settings
+ *  as requested.
+ */
+static int stmmac_hwtstamp_get(struct net_device *dev, struct ifreq *ifr)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	struct hwtstamp_config *config = &priv->tstamp_config;
+
+	if (!(priv->dma_cap.time_stamp || priv->dma_cap.atime_stamp))
+		return -EOPNOTSUPP;
+
+	return copy_to_user(ifr->ifr_data, config,
+			    sizeof(*config)) ? -EFAULT : 0;
+}
+
+/**
+ * stmmac_init_tstamp_counter - init hardware timestamping counter
+ * @priv: driver private structure
+ * @systime_flags: timestamping flags
+ * Description:
+ * Initialize hardware counter for packet timestamping.
+ * This is valid as long as the interface is open and not suspended.
+ * Will be rerun after resuming from suspend, case in which the timestamping
+ * flags updated by stmmac_hwtstamp_set() also need to be restored.
+ */
+int stmmac_init_tstamp_counter(struct stmmac_priv *priv, u32 systime_flags)
+{
+	bool xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
+	struct timespec64 now;
+	u32 sec_inc = 0;
+	u64 temp = 0;
+	int ret;
+
+	if (!(priv->dma_cap.time_stamp || priv->dma_cap.atime_stamp))
+		return -EOPNOTSUPP;
+
+	ret = clk_prepare_enable(priv->plat->clk_ptp_ref);
+	if (ret < 0) {
+		netdev_warn(priv->dev,
+			    "failed to enable PTP reference clock: %pe\n",
+			    ERR_PTR(ret));
+		return ret;
+	}
+
+	stmmac_config_hw_tstamping(priv, priv->ptpaddr, systime_flags);
+	priv->systime_flags = systime_flags;
+
+	/* program Sub Second Increment reg */
+	stmmac_config_sub_second_increment(priv, priv->ptpaddr,
+					   priv->plat->clk_ptp_rate,
+					   xmac, &sec_inc);
+	temp = div_u64(1000000000ULL, sec_inc);
+
+	/* Store sub second increment for later use */
+	priv->sub_second_inc = sec_inc;
+
+	/* calculate default added value:
+	 * formula is :
+	 * addend = (2^32)/freq_div_ratio;
+	 * where, freq_div_ratio = 1e9ns/sec_inc
+	 */
+	temp = (u64)(temp << 32);
+	priv->default_addend = div_u64(temp, priv->plat->clk_ptp_rate);
+	stmmac_config_addend(priv, priv->ptpaddr, priv->default_addend);
+
+	/* initialize system time */
+	ktime_get_real_ts64(&now);
+
+	/* lower 32 bits of tv_sec are safe until y2106 */
+	stmmac_init_systime(priv, priv->ptpaddr, (u32)now.tv_sec, now.tv_nsec);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(stmmac_init_tstamp_counter);
+
+/**
+ * stmmac_init_ptp - init PTP
+ * @priv: driver private structure
+ * Description: this is to verify if the HW supports the PTPv1 or PTPv2.
+ * This is done by looking at the HW cap. register.
+ * This function also registers the ptp driver.
+ */
+static int stmmac_init_ptp(struct stmmac_priv *priv)
+{
+	bool xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
+	int ret;
+
+	ret = stmmac_init_tstamp_counter(priv, STMMAC_HWTS_ACTIVE);
+	if (ret)
+		return ret;
+
+	priv->adv_ts = 0;
+	/* Check if adv_ts can be enabled for dwmac 4.x / xgmac core */
+	if (xmac && priv->dma_cap.atime_stamp)
+		priv->adv_ts = 1;
+	/* Dwmac 3.x core with extend_desc can support adv_ts */
+	else if (priv->extend_desc && priv->dma_cap.atime_stamp)
+		priv->adv_ts = 1;
+
+	if (priv->dma_cap.time_stamp)
+		netdev_info(priv->dev, "IEEE 1588-2002 Timestamp supported\n");
+
+	if (priv->adv_ts)
+		netdev_info(priv->dev,
+			    "IEEE 1588-2008 Advanced Timestamp supported\n");
+
+	priv->hwts_tx_en = 0;
+	priv->hwts_rx_en = 0;
+
+	stmmac_ptp_register(priv);
+
+	return 0;
+}
+
+static void stmmac_release_ptp(struct stmmac_priv *priv)
+{
+	clk_disable_unprepare(priv->plat->clk_ptp_ref);
+	stmmac_ptp_unregister(priv);
+}
+
+/**
+ *  stmmac_mac_flow_ctrl - Configure flow control in all queues
+ *  @priv: driver private structure
+ *  @duplex: duplex passed to the next function
+ *  Description: It is used for configuring the flow control in all queues
+ */
+static void stmmac_mac_flow_ctrl(struct stmmac_priv *priv, u32 duplex)
+{
+	u32 tx_cnt = priv->plat->tx_queues_to_use;
+
+	stmmac_flow_ctrl(priv, priv->hw, duplex, priv->flow_ctrl,
+			priv->pause, tx_cnt);
+}
+
+static void stmmac_validate(struct phylink_config *config,
+			    unsigned long *supported,
+			    struct phylink_link_state *state)
+{
+	struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(mac_supported) = { 0, };
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+	int tx_cnt = priv->plat->tx_queues_to_use;
+	int max_speed = priv->plat->max_speed;
+
+	phylink_set(mac_supported, 10baseT_Half);
+	phylink_set(mac_supported, 10baseT_Full);
+	phylink_set(mac_supported, 100baseT_Half);
+	phylink_set(mac_supported, 100baseT_Full);
+	phylink_set(mac_supported, 1000baseT_Half);
+	phylink_set(mac_supported, 1000baseT_Full);
+	phylink_set(mac_supported, 1000baseKX_Full);
+
+	phylink_set(mac_supported, Autoneg);
+	phylink_set(mac_supported, Pause);
+	phylink_set(mac_supported, Asym_Pause);
+	phylink_set_port_modes(mac_supported);
+
+	/* Cut down 1G if asked to */
+	if ((max_speed > 0) && (max_speed < 1000)) {
+		phylink_set(mask, 1000baseT_Full);
+		phylink_set(mask, 1000baseX_Full);
+	} else if (priv->plat->has_gmac4) {
+		if (!max_speed || max_speed >= 2500) {
+			phylink_set(mac_supported, 2500baseT_Full);
+			phylink_set(mac_supported, 2500baseX_Full);
+		}
+	} else if (priv->plat->has_xgmac) {
+		if (!max_speed || (max_speed >= 2500)) {
+			phylink_set(mac_supported, 2500baseT_Full);
+			phylink_set(mac_supported, 2500baseX_Full);
+		}
+		if (!max_speed || (max_speed >= 5000)) {
+			phylink_set(mac_supported, 5000baseT_Full);
+		}
+		if (!max_speed || (max_speed >= 10000)) {
+			phylink_set(mac_supported, 10000baseSR_Full);
+			phylink_set(mac_supported, 10000baseLR_Full);
+			phylink_set(mac_supported, 10000baseER_Full);
+			phylink_set(mac_supported, 10000baseLRM_Full);
+			phylink_set(mac_supported, 10000baseT_Full);
+			phylink_set(mac_supported, 10000baseKX4_Full);
+			phylink_set(mac_supported, 10000baseKR_Full);
+		}
+		if (!max_speed || (max_speed >= 25000)) {
+			phylink_set(mac_supported, 25000baseCR_Full);
+			phylink_set(mac_supported, 25000baseKR_Full);
+			phylink_set(mac_supported, 25000baseSR_Full);
+		}
+		if (!max_speed || (max_speed >= 40000)) {
+			phylink_set(mac_supported, 40000baseKR4_Full);
+			phylink_set(mac_supported, 40000baseCR4_Full);
+			phylink_set(mac_supported, 40000baseSR4_Full);
+			phylink_set(mac_supported, 40000baseLR4_Full);
+		}
+		if (!max_speed || (max_speed >= 50000)) {
+			phylink_set(mac_supported, 50000baseCR2_Full);
+			phylink_set(mac_supported, 50000baseKR2_Full);
+			phylink_set(mac_supported, 50000baseSR2_Full);
+			phylink_set(mac_supported, 50000baseKR_Full);
+			phylink_set(mac_supported, 50000baseSR_Full);
+			phylink_set(mac_supported, 50000baseCR_Full);
+			phylink_set(mac_supported, 50000baseLR_ER_FR_Full);
+			phylink_set(mac_supported, 50000baseDR_Full);
+		}
+		if (!max_speed || (max_speed >= 100000)) {
+			phylink_set(mac_supported, 100000baseKR4_Full);
+			phylink_set(mac_supported, 100000baseSR4_Full);
+			phylink_set(mac_supported, 100000baseCR4_Full);
+			phylink_set(mac_supported, 100000baseLR4_ER4_Full);
+			phylink_set(mac_supported, 100000baseKR2_Full);
+			phylink_set(mac_supported, 100000baseSR2_Full);
+			phylink_set(mac_supported, 100000baseCR2_Full);
+			phylink_set(mac_supported, 100000baseLR2_ER2_FR2_Full);
+			phylink_set(mac_supported, 100000baseDR2_Full);
+		}
+	}
+
+	/* Half-Duplex can only work with single queue */
+	if (tx_cnt > 1) {
+		phylink_set(mask, 10baseT_Half);
+		phylink_set(mask, 100baseT_Half);
+		phylink_set(mask, 1000baseT_Half);
+	}
+
+	linkmode_and(supported, supported, mac_supported);
+	linkmode_andnot(supported, supported, mask);
+
+	linkmode_and(state->advertising, state->advertising, mac_supported);
+	linkmode_andnot(state->advertising, state->advertising, mask);
+
+	/* If PCS is supported, check which modes it supports. */
+	if (priv->hw->xpcs)
+		xpcs_validate(priv->hw->xpcs, supported, state);
+}
+
+static void stmmac_mac_config(struct phylink_config *config, unsigned int mode,
+			      const struct phylink_link_state *state)
+{
+	/* Nothing to do, xpcs_config() handles everything */
+}
+
+static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up)
+{
+	struct stmmac_fpe_cfg *fpe_cfg = priv->plat->fpe_cfg;
+	enum stmmac_fpe_state *lo_state = &fpe_cfg->lo_fpe_state;
+	enum stmmac_fpe_state *lp_state = &fpe_cfg->lp_fpe_state;
+	bool *hs_enable = &fpe_cfg->hs_enable;
+
+	if (is_up && *hs_enable) {
+		stmmac_fpe_send_mpacket(priv, priv->ioaddr, MPACKET_VERIFY);
+	} else {
+		*lo_state = FPE_STATE_OFF;
+		*lp_state = FPE_STATE_OFF;
+	}
+}
+
+static void stmmac_mac_link_down(struct phylink_config *config,
+				 unsigned int mode, phy_interface_t interface)
+{
+	struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
+
+	stmmac_mac_set(priv, priv->ioaddr, false);
+	priv->eee_active = false;
+	priv->tx_lpi_enabled = false;
+	priv->eee_enabled = stmmac_eee_init(priv);
+	stmmac_set_eee_pls(priv, priv->hw, false);
+
+	if (priv->dma_cap.fpesel)
+		stmmac_fpe_link_state_handle(priv, false);
+}
+
+static void stmmac_mac_link_up(struct phylink_config *config,
+			       struct phy_device *phy,
+			       unsigned int mode, phy_interface_t interface,
+			       int speed, int duplex,
+			       bool tx_pause, bool rx_pause)
+{
+	struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
+	u32 ctrl;
+
+	ctrl = readl(priv->ioaddr + MAC_CTRL_REG);
+	ctrl &= ~priv->hw->link.speed_mask;
+
+	if (interface == PHY_INTERFACE_MODE_USXGMII) {
+		switch (speed) {
+		case SPEED_10000:
+			ctrl |= priv->hw->link.xgmii.speed10000;
+			break;
+		case SPEED_5000:
+			ctrl |= priv->hw->link.xgmii.speed5000;
+			break;
+		case SPEED_2500:
+			ctrl |= priv->hw->link.xgmii.speed2500;
+			break;
+		default:
+			return;
+		}
+	} else if (interface == PHY_INTERFACE_MODE_XLGMII) {
+		switch (speed) {
+		case SPEED_100000:
+			ctrl |= priv->hw->link.xlgmii.speed100000;
+			break;
+		case SPEED_50000:
+			ctrl |= priv->hw->link.xlgmii.speed50000;
+			break;
+		case SPEED_40000:
+			ctrl |= priv->hw->link.xlgmii.speed40000;
+			break;
+		case SPEED_25000:
+			ctrl |= priv->hw->link.xlgmii.speed25000;
+			break;
+		case SPEED_10000:
+			ctrl |= priv->hw->link.xgmii.speed10000;
+			break;
+		case SPEED_2500:
+			ctrl |= priv->hw->link.speed2500;
+			break;
+		case SPEED_1000:
+			ctrl |= priv->hw->link.speed1000;
+			break;
+		default:
+			return;
+		}
+	} else {
+		switch (speed) {
+		case SPEED_2500:
+			ctrl |= priv->hw->link.speed2500;
+			break;
+		case SPEED_1000:
+			ctrl |= priv->hw->link.speed1000;
+			break;
+		case SPEED_100:
+			ctrl |= priv->hw->link.speed100;
+			break;
+		case SPEED_10:
+			ctrl |= priv->hw->link.speed10;
+			break;
+		default:
+			return;
+		}
+	}
+
+	priv->speed = speed;
+
+	if (priv->plat->fix_mac_speed)
+		priv->plat->fix_mac_speed(priv->plat->bsp_priv, speed);
+
+	if (!duplex)
+		ctrl &= ~priv->hw->link.duplex;
+	else
+		ctrl |= priv->hw->link.duplex;
+
+	/* Flow Control operation */
+	if (tx_pause && rx_pause)
+		stmmac_mac_flow_ctrl(priv, duplex);
+
+	writel(ctrl, priv->ioaddr + MAC_CTRL_REG);
+
+	stmmac_mac_set(priv, priv->ioaddr, true);
+	if (phy && priv->dma_cap.eee) {
+		priv->eee_active = phy_init_eee(phy, 1) >= 0;
+		priv->eee_enabled = stmmac_eee_init(priv);
+		priv->tx_lpi_enabled = priv->eee_enabled;
+		stmmac_set_eee_pls(priv, priv->hw, true);
+	}
+
+	if (priv->dma_cap.fpesel)
+		stmmac_fpe_link_state_handle(priv, true);
+}
+
+static const struct phylink_mac_ops stmmac_phylink_mac_ops = {
+	.validate = stmmac_validate,
+	.mac_config = stmmac_mac_config,
+	.mac_link_down = stmmac_mac_link_down,
+	.mac_link_up = stmmac_mac_link_up,
+};
+
+/**
+ * stmmac_check_pcs_mode - verify if RGMII/SGMII is supported
+ * @priv: driver private structure
+ * Description: this is to verify if the HW supports the PCS.
+ * Physical Coding Sublayer (PCS) interface that can be used when the MAC is
+ * configured for the TBI, RTBI, or SGMII PHY interface.
+ */
+static void stmmac_check_pcs_mode(struct stmmac_priv *priv)
+{
+	int interface = priv->plat->interface;
+
+	if (priv->dma_cap.pcs) {
+		if ((interface == PHY_INTERFACE_MODE_RGMII) ||
+		    (interface == PHY_INTERFACE_MODE_RGMII_ID) ||
+		    (interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
+		    (interface == PHY_INTERFACE_MODE_RGMII_TXID)) {
+			netdev_dbg(priv->dev, "PCS RGMII support enabled\n");
+			priv->hw->pcs = STMMAC_PCS_RGMII;
+		} else if (interface == PHY_INTERFACE_MODE_SGMII) {
+			netdev_dbg(priv->dev, "PCS SGMII support enabled\n");
+			priv->hw->pcs = STMMAC_PCS_SGMII;
+		}
+	}
+}
+
+/**
+ * stmmac_init_phy - PHY initialization
+ * @dev: net device structure
+ * Description: it initializes the driver's PHY state, and attaches the PHY
+ * to the mac driver.
+ *  Return value:
+ *  0 on success
+ */
+static int stmmac_init_phy(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	struct device_node *node;
+	int ret;
+
+	node = priv->plat->phylink_node;
+
+	if (node)
+		ret = phylink_of_phy_connect(priv->phylink, node, 0);
+
+	/* Some DT bindings do not set-up the PHY handle. Let's try to
+	 * manually parse it
+	 */
+	if (!node || ret) {
+		int addr = priv->plat->phy_addr;
+		struct phy_device *phydev;
+
+		phydev = mdiobus_get_phy(priv->mii, addr);
+		if (!phydev) {
+			netdev_err(priv->dev, "no phy at addr %d\n", addr);
+			return -ENODEV;
+		}
+
+		ret = phylink_connect_phy(priv->phylink, phydev);
+	}
+
+	if (!priv->plat->pmt) {
+		struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
+
+		phylink_ethtool_get_wol(priv->phylink, &wol);
+		device_set_wakeup_capable(priv->device, !!wol.supported);
+	}
+
+	return ret;
+}
+
+static int stmmac_phy_setup(struct stmmac_priv *priv)
+{
+	struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
+	struct fwnode_handle *fwnode = of_fwnode_handle(priv->plat->phylink_node);
+	int mode = priv->plat->phy_interface;
+	struct phylink *phylink;
+
+	priv->phylink_config.dev = &priv->dev->dev;
+	priv->phylink_config.type = PHYLINK_NETDEV;
+	priv->phylink_config.pcs_poll = true;
+	if (priv->plat->mdio_bus_data)
+		priv->phylink_config.ovr_an_inband =
+			mdio_bus_data->xpcs_an_inband;
+
+	if (!fwnode)
+		fwnode = dev_fwnode(priv->device);
+
+	phylink = phylink_create(&priv->phylink_config, fwnode,
+				 mode, &stmmac_phylink_mac_ops);
+	if (IS_ERR(phylink))
+		return PTR_ERR(phylink);
+
+	if (priv->hw->xpcs)
+		phylink_set_pcs(phylink, &priv->hw->xpcs->pcs);
+
+	priv->phylink = phylink;
+	return 0;
+}
+
+static void stmmac_display_rx_rings(struct stmmac_priv *priv)
+{
+	u32 rx_cnt = priv->plat->rx_queues_to_use;
+	unsigned int desc_size;
+	void *head_rx;
+	u32 queue;
+
+	/* Display RX rings */
+	for (queue = 0; queue < rx_cnt; queue++) {
+		struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+
+		pr_info("\tRX Queue %u rings\n", queue);
+
+		if (priv->extend_desc) {
+			head_rx = (void *)rx_q->dma_erx;
+			desc_size = sizeof(struct dma_extended_desc);
+		} else {
+			head_rx = (void *)rx_q->dma_rx;
+			desc_size = sizeof(struct dma_desc);
+		}
+
+		/* Display RX ring */
+		stmmac_display_ring(priv, head_rx, priv->dma_rx_size, true,
+				    rx_q->dma_rx_phy, desc_size);
+	}
+}
+
+static void stmmac_display_tx_rings(struct stmmac_priv *priv)
+{
+	u32 tx_cnt = priv->plat->tx_queues_to_use;
+	unsigned int desc_size;
+	void *head_tx;
+	u32 queue;
+
+	/* Display TX rings */
+	for (queue = 0; queue < tx_cnt; queue++) {
+		struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
+
+		pr_info("\tTX Queue %d rings\n", queue);
+
+		if (priv->extend_desc) {
+			head_tx = (void *)tx_q->dma_etx;
+			desc_size = sizeof(struct dma_extended_desc);
+		} else if (tx_q->tbs & STMMAC_TBS_AVAIL) {
+			head_tx = (void *)tx_q->dma_entx;
+			desc_size = sizeof(struct dma_edesc);
+		} else {
+			head_tx = (void *)tx_q->dma_tx;
+			desc_size = sizeof(struct dma_desc);
+		}
+
+		stmmac_display_ring(priv, head_tx, priv->dma_tx_size, false,
+				    tx_q->dma_tx_phy, desc_size);
+	}
+}
+
+static void stmmac_display_rings(struct stmmac_priv *priv)
+{
+	/* Display RX ring */
+	stmmac_display_rx_rings(priv);
+
+	/* Display TX ring */
+	stmmac_display_tx_rings(priv);
+}
+
+static int stmmac_set_bfsize(int mtu, int bufsize)
+{
+	int ret = bufsize;
+
+	if (mtu >= BUF_SIZE_8KiB)
+		ret = BUF_SIZE_16KiB;
+	else if (mtu >= BUF_SIZE_4KiB)
+		ret = BUF_SIZE_8KiB;
+	else if (mtu >= BUF_SIZE_2KiB)
+		ret = BUF_SIZE_4KiB;
+	else if (mtu > DEFAULT_BUFSIZE)
+		ret = BUF_SIZE_2KiB;
+	else
+		ret = DEFAULT_BUFSIZE;
+
+	return ret;
+}
+
+/**
+ * stmmac_clear_rx_descriptors - clear RX descriptors
+ * @priv: driver private structure
+ * @queue: RX queue index
+ * Description: this function is called to clear the RX descriptors
+ * in case of both basic and extended descriptors are used.
+ */
+static void stmmac_clear_rx_descriptors(struct stmmac_priv *priv, u32 queue)
+{
+	struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+	int i;
+
+	/* Clear the RX descriptors */
+	for (i = 0; i < priv->dma_rx_size; i++)
+		if (priv->extend_desc)
+			stmmac_init_rx_desc(priv, &rx_q->dma_erx[i].basic,
+					priv->use_riwt, priv->mode,
+					(i == priv->dma_rx_size - 1),
+					priv->dma_buf_sz);
+		else
+			stmmac_init_rx_desc(priv, &rx_q->dma_rx[i],
+					priv->use_riwt, priv->mode,
+					(i == priv->dma_rx_size - 1),
+					priv->dma_buf_sz);
+}
+
+/**
+ * stmmac_clear_tx_descriptors - clear tx descriptors
+ * @priv: driver private structure
+ * @queue: TX queue index.
+ * Description: this function is called to clear the TX descriptors
+ * in case of both basic and extended descriptors are used.
+ */
+static void stmmac_clear_tx_descriptors(struct stmmac_priv *priv, u32 queue)
+{
+	struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
+	int i;
+
+	/* Clear the TX descriptors */
+	for (i = 0; i < priv->dma_tx_size; i++) {
+		int last = (i == (priv->dma_tx_size - 1));
+		struct dma_desc *p;
+
+		if (priv->extend_desc)
+			p = &tx_q->dma_etx[i].basic;
+		else if (tx_q->tbs & STMMAC_TBS_AVAIL)
+			p = &tx_q->dma_entx[i].basic;
+		else
+			p = &tx_q->dma_tx[i];
+
+		stmmac_init_tx_desc(priv, p, priv->mode, last);
+	}
+}
+
+/**
+ * stmmac_clear_descriptors - clear descriptors
+ * @priv: driver private structure
+ * Description: this function is called to clear the TX and RX descriptors
+ * in case of both basic and extended descriptors are used.
+ */
+static void stmmac_clear_descriptors(struct stmmac_priv *priv)
+{
+	u32 rx_queue_cnt = priv->plat->rx_queues_to_use;
+	u32 tx_queue_cnt = priv->plat->tx_queues_to_use;
+	u32 queue;
+
+	/* Clear the RX descriptors */
+	for (queue = 0; queue < rx_queue_cnt; queue++)
+		stmmac_clear_rx_descriptors(priv, queue);
+
+	/* Clear the TX descriptors */
+	for (queue = 0; queue < tx_queue_cnt; queue++)
+		stmmac_clear_tx_descriptors(priv, queue);
+}
+
+/**
+ * stmmac_init_rx_buffers - init the RX descriptor buffer.
+ * @priv: driver private structure
+ * @p: descriptor pointer
+ * @i: descriptor index
+ * @flags: gfp flag
+ * @queue: RX queue index
+ * Description: this function is called to allocate a receive buffer, perform
+ * the DMA mapping and init the descriptor.
+ */
+static int stmmac_init_rx_buffers(struct stmmac_priv *priv, struct dma_desc *p,
+				  int i, gfp_t flags, u32 queue)
+{
+	struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+	struct stmmac_rx_buffer *buf = &rx_q->buf_pool[i];
+	gfp_t gfp = (GFP_ATOMIC | __GFP_NOWARN);
+
+	if (priv->dma_cap.addr64 <= 32)
+		gfp |= GFP_DMA32;
+
+	if (!buf->page) {
+		buf->page = page_pool_alloc_pages(rx_q->page_pool, gfp);
+		if (!buf->page)
+			return -ENOMEM;
+		buf->page_offset = stmmac_rx_offset(priv);
+	}
+
+	if (priv->sph && !buf->sec_page) {
+		buf->sec_page = page_pool_alloc_pages(rx_q->page_pool, gfp);
+		if (!buf->sec_page)
+			return -ENOMEM;
+
+		buf->sec_addr = page_pool_get_dma_addr(buf->sec_page);
+		stmmac_set_desc_sec_addr(priv, p, buf->sec_addr, true);
+	} else {
+		buf->sec_page = NULL;
+		stmmac_set_desc_sec_addr(priv, p, buf->sec_addr, false);
+	}
+
+	buf->addr = page_pool_get_dma_addr(buf->page) + buf->page_offset;
+
+	stmmac_set_desc_addr(priv, p, buf->addr);
+	if (priv->dma_buf_sz == BUF_SIZE_16KiB)
+		stmmac_init_desc3(priv, p);
+
+	return 0;
+}
+
+/**
+ * stmmac_free_rx_buffer - free RX dma buffers
+ * @priv: private structure
+ * @queue: RX queue index
+ * @i: buffer index.
+ */
+static void stmmac_free_rx_buffer(struct stmmac_priv *priv, u32 queue, int i)
+{
+	struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+	struct stmmac_rx_buffer *buf = &rx_q->buf_pool[i];
+
+	if (buf->page)
+		page_pool_put_full_page(rx_q->page_pool, buf->page, false);
+	buf->page = NULL;
+
+	if (buf->sec_page)
+		page_pool_put_full_page(rx_q->page_pool, buf->sec_page, false);
+	buf->sec_page = NULL;
+}
+
+/**
+ * stmmac_free_tx_buffer - free RX dma buffers
+ * @priv: private structure
+ * @queue: RX queue index
+ * @i: buffer index.
+ */
+static void stmmac_free_tx_buffer(struct stmmac_priv *priv, u32 queue, int i)
+{
+	struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
+
+	if (tx_q->tx_skbuff_dma[i].buf &&
+	    tx_q->tx_skbuff_dma[i].buf_type != STMMAC_TXBUF_T_XDP_TX) {
+		if (tx_q->tx_skbuff_dma[i].map_as_page)
+			dma_unmap_page(priv->device,
+				       tx_q->tx_skbuff_dma[i].buf,
+				       tx_q->tx_skbuff_dma[i].len,
+				       DMA_TO_DEVICE);
+		else
+			dma_unmap_single(priv->device,
+					 tx_q->tx_skbuff_dma[i].buf,
+					 tx_q->tx_skbuff_dma[i].len,
+					 DMA_TO_DEVICE);
+	}
+
+	if (tx_q->xdpf[i] &&
+	    (tx_q->tx_skbuff_dma[i].buf_type == STMMAC_TXBUF_T_XDP_TX ||
+	     tx_q->tx_skbuff_dma[i].buf_type == STMMAC_TXBUF_T_XDP_NDO)) {
+		xdp_return_frame(tx_q->xdpf[i]);
+		tx_q->xdpf[i] = NULL;
+	}
+
+	if (tx_q->tx_skbuff_dma[i].buf_type == STMMAC_TXBUF_T_XSK_TX)
+		tx_q->xsk_frames_done++;
+
+	if (tx_q->tx_skbuff[i] &&
+	    tx_q->tx_skbuff_dma[i].buf_type == STMMAC_TXBUF_T_SKB) {
+		dev_kfree_skb_any(tx_q->tx_skbuff[i]);
+		tx_q->tx_skbuff[i] = NULL;
+	}
+
+	tx_q->tx_skbuff_dma[i].buf = 0;
+	tx_q->tx_skbuff_dma[i].map_as_page = false;
+}
+
+/**
+ * dma_free_rx_skbufs - free RX dma buffers
+ * @priv: private structure
+ * @queue: RX queue index
+ */
+static void dma_free_rx_skbufs(struct stmmac_priv *priv, u32 queue)
+{
+	int i;
+
+	for (i = 0; i < priv->dma_rx_size; i++)
+		stmmac_free_rx_buffer(priv, queue, i);
+}
+
+static int stmmac_alloc_rx_buffers(struct stmmac_priv *priv, u32 queue,
+				   gfp_t flags)
+{
+	struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+	int i;
+
+	for (i = 0; i < priv->dma_rx_size; i++) {
+		struct dma_desc *p;
+		int ret;
+
+		if (priv->extend_desc)
+			p = &((rx_q->dma_erx + i)->basic);
+		else
+			p = rx_q->dma_rx + i;
+
+		ret = stmmac_init_rx_buffers(priv, p, i, flags,
+					     queue);
+		if (ret)
+			return ret;
+
+		rx_q->buf_alloc_num++;
+	}
+
+	return 0;
+}
+
+/**
+ * dma_free_rx_xskbufs - free RX dma buffers from XSK pool
+ * @priv: private structure
+ * @queue: RX queue index
+ */
+static void dma_free_rx_xskbufs(struct stmmac_priv *priv, u32 queue)
+{
+	struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+	int i;
+
+	for (i = 0; i < priv->dma_rx_size; i++) {
+		struct stmmac_rx_buffer *buf = &rx_q->buf_pool[i];
+
+		if (!buf->xdp)
+			continue;
+
+		xsk_buff_free(buf->xdp);
+		buf->xdp = NULL;
+	}
+}
+
+static int stmmac_alloc_rx_buffers_zc(struct stmmac_priv *priv, u32 queue)
+{
+	struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+	int i;
+
+	for (i = 0; i < priv->dma_rx_size; i++) {
+		struct stmmac_rx_buffer *buf;
+		dma_addr_t dma_addr;
+		struct dma_desc *p;
+
+		if (priv->extend_desc)
+			p = (struct dma_desc *)(rx_q->dma_erx + i);
+		else
+			p = rx_q->dma_rx + i;
+
+		buf = &rx_q->buf_pool[i];
+
+		buf->xdp = xsk_buff_alloc(rx_q->xsk_pool);
+		if (!buf->xdp)
+			return -ENOMEM;
+
+		dma_addr = xsk_buff_xdp_get_dma(buf->xdp);
+		stmmac_set_desc_addr(priv, p, dma_addr);
+		rx_q->buf_alloc_num++;
+	}
+
+	return 0;
+}
+
+static struct xsk_buff_pool *stmmac_get_xsk_pool(struct stmmac_priv *priv, u32 queue)
+{
+	if (!stmmac_xdp_is_enabled(priv) || !test_bit(queue, priv->af_xdp_zc_qps))
+		return NULL;
+
+	return xsk_get_pool_from_qid(priv->dev, queue);
+}
+
+/**
+ * __init_dma_rx_desc_rings - init the RX descriptor ring (per queue)
+ * @priv: driver private structure
+ * @queue: RX queue index
+ * @flags: gfp flag.
+ * Description: this function initializes the DMA RX descriptors
+ * and allocates the socket buffers. It supports the chained and ring
+ * modes.
+ */
+static int __init_dma_rx_desc_rings(struct stmmac_priv *priv, u32 queue, gfp_t flags)
+{
+	struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+	int ret;
+
+	netif_dbg(priv, probe, priv->dev,
+		  "(%s) dma_rx_phy=0x%08x\n", __func__,
+		  (u32)rx_q->dma_rx_phy);
+
+	stmmac_clear_rx_descriptors(priv, queue);
+
+	xdp_rxq_info_unreg_mem_model(&rx_q->xdp_rxq);
+
+	rx_q->xsk_pool = stmmac_get_xsk_pool(priv, queue);
+
+	if (rx_q->xsk_pool) {
+		WARN_ON(xdp_rxq_info_reg_mem_model(&rx_q->xdp_rxq,
+						   MEM_TYPE_XSK_BUFF_POOL,
+						   NULL));
+		netdev_info(priv->dev,
+			    "Register MEM_TYPE_XSK_BUFF_POOL RxQ-%d\n",
+			    rx_q->queue_index);
+		xsk_pool_set_rxq_info(rx_q->xsk_pool, &rx_q->xdp_rxq);
+	} else {
+		WARN_ON(xdp_rxq_info_reg_mem_model(&rx_q->xdp_rxq,
+						   MEM_TYPE_PAGE_POOL,
+						   rx_q->page_pool));
+		netdev_info(priv->dev,
+			    "Register MEM_TYPE_PAGE_POOL RxQ-%d\n",
+			    rx_q->queue_index);
+	}
+
+	if (rx_q->xsk_pool) {
+		/* RX XDP ZC buffer pool may not be populated, e.g.
+		 * xdpsock TX-only.
+		 */
+		stmmac_alloc_rx_buffers_zc(priv, queue);
+	} else {
+		ret = stmmac_alloc_rx_buffers(priv, queue, flags);
+		if (ret < 0)
+			return -ENOMEM;
+	}
+
+	rx_q->cur_rx = 0;
+	rx_q->dirty_rx = 0;
+
+	/* Setup the chained descriptor addresses */
+	if (priv->mode == STMMAC_CHAIN_MODE) {
+		if (priv->extend_desc)
+			stmmac_mode_init(priv, rx_q->dma_erx,
+					 rx_q->dma_rx_phy,
+					 priv->dma_rx_size, 1);
+		else
+			stmmac_mode_init(priv, rx_q->dma_rx,
+					 rx_q->dma_rx_phy,
+					 priv->dma_rx_size, 0);
+	}
+
+	return 0;
+}
+
+static int init_dma_rx_desc_rings(struct net_device *dev, gfp_t flags)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	u32 rx_count = priv->plat->rx_queues_to_use;
+	u32 queue;
+	int ret;
+
+	/* RX INITIALIZATION */
+	netif_dbg(priv, probe, priv->dev,
+		  "SKB addresses:\nskb\t\tskb data\tdma data\n");
+
+	for (queue = 0; queue < rx_count; queue++) {
+		ret = __init_dma_rx_desc_rings(priv, queue, flags);
+		if (ret)
+			goto err_init_rx_buffers;
+	}
+
+	return 0;
+
+err_init_rx_buffers:
+	while (queue >= 0) {
+		struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+
+		if (rx_q->xsk_pool)
+			dma_free_rx_xskbufs(priv, queue);
+		else
+			dma_free_rx_skbufs(priv, queue);
+
+		rx_q->buf_alloc_num = 0;
+		rx_q->xsk_pool = NULL;
+
+		if (queue == 0)
+			break;
+
+		queue--;
+	}
+
+	return ret;
+}
+
+/**
+ * __init_dma_tx_desc_rings - init the TX descriptor ring (per queue)
+ * @priv: driver private structure
+ * @queue : TX queue index
+ * Description: this function initializes the DMA TX descriptors
+ * and allocates the socket buffers. It supports the chained and ring
+ * modes.
+ */
+static int __init_dma_tx_desc_rings(struct stmmac_priv *priv, u32 queue)
+{
+	struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
+	int i;
+
+	netif_dbg(priv, probe, priv->dev,
+		  "(%s) dma_tx_phy=0x%08x\n", __func__,
+		  (u32)tx_q->dma_tx_phy);
+
+	/* Setup the chained descriptor addresses */
+	if (priv->mode == STMMAC_CHAIN_MODE) {
+		if (priv->extend_desc)
+			stmmac_mode_init(priv, tx_q->dma_etx,
+					 tx_q->dma_tx_phy,
+					 priv->dma_tx_size, 1);
+		else if (!(tx_q->tbs & STMMAC_TBS_AVAIL))
+			stmmac_mode_init(priv, tx_q->dma_tx,
+					 tx_q->dma_tx_phy,
+					 priv->dma_tx_size, 0);
+	}
+
+	tx_q->xsk_pool = stmmac_get_xsk_pool(priv, queue);
+
+	for (i = 0; i < priv->dma_tx_size; i++) {
+		struct dma_desc *p;
+
+		if (priv->extend_desc)
+			p = &((tx_q->dma_etx + i)->basic);
+		else if (tx_q->tbs & STMMAC_TBS_AVAIL)
+			p = &((tx_q->dma_entx + i)->basic);
+		else
+			p = tx_q->dma_tx + i;
+
+		stmmac_clear_desc(priv, p);
+
+		tx_q->tx_skbuff_dma[i].buf = 0;
+		tx_q->tx_skbuff_dma[i].map_as_page = false;
+		tx_q->tx_skbuff_dma[i].len = 0;
+		tx_q->tx_skbuff_dma[i].last_segment = false;
+		tx_q->tx_skbuff[i] = NULL;
+	}
+
+	tx_q->dirty_tx = 0;
+	tx_q->cur_tx = 0;
+	tx_q->mss = 0;
+
+	netdev_tx_reset_queue(netdev_get_tx_queue(priv->dev, queue));
+
+	return 0;
+}
+
+static int init_dma_tx_desc_rings(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	u32 tx_queue_cnt;
+	u32 queue;
+
+	tx_queue_cnt = priv->plat->tx_queues_to_use;
+
+	for (queue = 0; queue < tx_queue_cnt; queue++)
+		__init_dma_tx_desc_rings(priv, queue);
+
+	return 0;
+}
+
+/**
+ * init_dma_desc_rings - init the RX/TX descriptor rings
+ * @dev: net device structure
+ * @flags: gfp flag.
+ * Description: this function initializes the DMA RX/TX descriptors
+ * and allocates the socket buffers. It supports the chained and ring
+ * modes.
+ */
+static int init_dma_desc_rings(struct net_device *dev, gfp_t flags)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	int ret;
+
+	ret = init_dma_rx_desc_rings(dev, flags);
+	if (ret)
+		return ret;
+
+	ret = init_dma_tx_desc_rings(dev);
+
+	stmmac_clear_descriptors(priv);
+
+	if (netif_msg_hw(priv))
+		stmmac_display_rings(priv);
+
+	return ret;
+}
+
+/**
+ * dma_free_tx_skbufs - free TX dma buffers
+ * @priv: private structure
+ * @queue: TX queue index
+ */
+static void dma_free_tx_skbufs(struct stmmac_priv *priv, u32 queue)
+{
+	struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
+	int i;
+
+	tx_q->xsk_frames_done = 0;
+
+	for (i = 0; i < priv->dma_tx_size; i++)
+		stmmac_free_tx_buffer(priv, queue, i);
+
+	if (tx_q->xsk_pool && tx_q->xsk_frames_done) {
+		xsk_tx_completed(tx_q->xsk_pool, tx_q->xsk_frames_done);
+		tx_q->xsk_frames_done = 0;
+		tx_q->xsk_pool = NULL;
+	}
+}
+
+/**
+ * stmmac_free_tx_skbufs - free TX skb buffers
+ * @priv: private structure
+ */
+static void stmmac_free_tx_skbufs(struct stmmac_priv *priv)
+{
+	u32 tx_queue_cnt = priv->plat->tx_queues_to_use;
+	u32 queue;
+
+	for (queue = 0; queue < tx_queue_cnt; queue++)
+		dma_free_tx_skbufs(priv, queue);
+}
+
+/**
+ * __free_dma_rx_desc_resources - free RX dma desc resources (per queue)
+ * @priv: private structure
+ * @queue: RX queue index
+ */
+static void __free_dma_rx_desc_resources(struct stmmac_priv *priv, u32 queue)
+{
+	struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+
+	/* Release the DMA RX socket buffers */
+	if (rx_q->xsk_pool)
+		dma_free_rx_xskbufs(priv, queue);
+	else
+		dma_free_rx_skbufs(priv, queue);
+
+	rx_q->buf_alloc_num = 0;
+	rx_q->xsk_pool = NULL;
+
+	/* Free DMA regions of consistent memory previously allocated */
+	if (!priv->extend_desc)
+		dma_free_coherent(priv->device, priv->dma_rx_size *
+				  sizeof(struct dma_desc),
+				  rx_q->dma_rx, rx_q->dma_rx_phy);
+	else
+		dma_free_coherent(priv->device, priv->dma_rx_size *
+				  sizeof(struct dma_extended_desc),
+				  rx_q->dma_erx, rx_q->dma_rx_phy);
+
+	if (xdp_rxq_info_is_reg(&rx_q->xdp_rxq))
+		xdp_rxq_info_unreg(&rx_q->xdp_rxq);
+
+	kfree(rx_q->buf_pool);
+	if (rx_q->page_pool)
+		page_pool_destroy(rx_q->page_pool);
+}
+
+static void free_dma_rx_desc_resources(struct stmmac_priv *priv)
+{
+	u32 rx_count = priv->plat->rx_queues_to_use;
+	u32 queue;
+
+	/* Free RX queue resources */
+	for (queue = 0; queue < rx_count; queue++)
+		__free_dma_rx_desc_resources(priv, queue);
+}
+
+/**
+ * __free_dma_tx_desc_resources - free TX dma desc resources (per queue)
+ * @priv: private structure
+ * @queue: TX queue index
+ */
+static void __free_dma_tx_desc_resources(struct stmmac_priv *priv, u32 queue)
+{
+	struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
+	size_t size;
+	void *addr;
+
+	/* Release the DMA TX socket buffers */
+	dma_free_tx_skbufs(priv, queue);
+
+	if (priv->extend_desc) {
+		size = sizeof(struct dma_extended_desc);
+		addr = tx_q->dma_etx;
+	} else if (tx_q->tbs & STMMAC_TBS_AVAIL) {
+		size = sizeof(struct dma_edesc);
+		addr = tx_q->dma_entx;
+	} else {
+		size = sizeof(struct dma_desc);
+		addr = tx_q->dma_tx;
+	}
+
+	size *= priv->dma_tx_size;
+
+	dma_free_coherent(priv->device, size, addr, tx_q->dma_tx_phy);
+
+	kfree(tx_q->tx_skbuff_dma);
+	kfree(tx_q->tx_skbuff);
+}
+
+static void free_dma_tx_desc_resources(struct stmmac_priv *priv)
+{
+	u32 tx_count = priv->plat->tx_queues_to_use;
+	u32 queue;
+
+	/* Free TX queue resources */
+	for (queue = 0; queue < tx_count; queue++)
+		__free_dma_tx_desc_resources(priv, queue);
+}
+
+/**
+ * __alloc_dma_rx_desc_resources - alloc RX resources (per queue).
+ * @priv: private structure
+ * @queue: RX queue index
+ * Description: according to which descriptor can be used (extend or basic)
+ * this function allocates the resources for TX and RX paths. In case of
+ * reception, for example, it pre-allocated the RX socket buffer in order to
+ * allow zero-copy mechanism.
+ */
+static int __alloc_dma_rx_desc_resources(struct stmmac_priv *priv, u32 queue)
+{
+	struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+	struct stmmac_channel *ch = &priv->channel[queue];
+	bool xdp_prog = stmmac_xdp_is_enabled(priv);
+	struct page_pool_params pp_params = { 0 };
+	unsigned int num_pages;
+	unsigned int napi_id;
+	int ret;
+
+	rx_q->queue_index = queue;
+	rx_q->priv_data = priv;
+
+	pp_params.flags = PP_FLAG_DMA_MAP | PP_FLAG_DMA_SYNC_DEV;
+	pp_params.pool_size = priv->dma_rx_size;
+	num_pages = DIV_ROUND_UP(priv->dma_buf_sz, PAGE_SIZE);
+	pp_params.order = ilog2(num_pages);
+	pp_params.nid = dev_to_node(priv->device);
+	pp_params.dev = priv->device;
+	pp_params.dma_dir = xdp_prog ? DMA_BIDIRECTIONAL : DMA_FROM_DEVICE;
+	pp_params.offset = stmmac_rx_offset(priv);
+	pp_params.max_len = STMMAC_MAX_RX_BUF_SIZE(num_pages);
+
+	rx_q->page_pool = page_pool_create(&pp_params);
+	if (IS_ERR(rx_q->page_pool)) {
+		ret = PTR_ERR(rx_q->page_pool);
+		rx_q->page_pool = NULL;
+		return ret;
+	}
+
+	rx_q->buf_pool = kcalloc(priv->dma_rx_size,
+				 sizeof(*rx_q->buf_pool),
+				 GFP_KERNEL);
+	if (!rx_q->buf_pool)
+		return -ENOMEM;
+
+	if (priv->extend_desc) {
+		rx_q->dma_erx = dma_alloc_coherent(priv->device,
+						   priv->dma_rx_size *
+						   sizeof(struct dma_extended_desc),
+						   &rx_q->dma_rx_phy,
+						   GFP_KERNEL);
+		if (!rx_q->dma_erx)
+			return -ENOMEM;
+
+	} else {
+		rx_q->dma_rx = dma_alloc_coherent(priv->device,
+						  priv->dma_rx_size *
+						  sizeof(struct dma_desc),
+						  &rx_q->dma_rx_phy,
+						  GFP_KERNEL);
+		if (!rx_q->dma_rx)
+			return -ENOMEM;
+	}
+
+	if (stmmac_xdp_is_enabled(priv) &&
+	    test_bit(queue, priv->af_xdp_zc_qps))
+		napi_id = ch->rxtx_napi.napi_id;
+	else
+		napi_id = ch->rx_napi.napi_id;
+
+	ret = xdp_rxq_info_reg(&rx_q->xdp_rxq, priv->dev,
+			       rx_q->queue_index,
+			       napi_id);
+	if (ret) {
+		netdev_err(priv->dev, "Failed to register xdp rxq info\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int alloc_dma_rx_desc_resources(struct stmmac_priv *priv)
+{
+	u32 rx_count = priv->plat->rx_queues_to_use;
+	u32 queue;
+	int ret;
+
+	/* RX queues buffers and DMA */
+	for (queue = 0; queue < rx_count; queue++) {
+		ret = __alloc_dma_rx_desc_resources(priv, queue);
+		if (ret)
+			goto err_dma;
+	}
+
+	return 0;
+
+err_dma:
+	free_dma_rx_desc_resources(priv);
+
+	return ret;
+}
+
+/**
+ * __alloc_dma_tx_desc_resources - alloc TX resources (per queue).
+ * @priv: private structure
+ * @queue: TX queue index
+ * Description: according to which descriptor can be used (extend or basic)
+ * this function allocates the resources for TX and RX paths. In case of
+ * reception, for example, it pre-allocated the RX socket buffer in order to
+ * allow zero-copy mechanism.
+ */
+static int __alloc_dma_tx_desc_resources(struct stmmac_priv *priv, u32 queue)
+{
+	struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
+	size_t size;
+	void *addr;
+
+	tx_q->queue_index = queue;
+	tx_q->priv_data = priv;
+
+	tx_q->tx_skbuff_dma = kcalloc(priv->dma_tx_size,
+				      sizeof(*tx_q->tx_skbuff_dma),
+				      GFP_KERNEL);
+	if (!tx_q->tx_skbuff_dma)
+		return -ENOMEM;
+
+	tx_q->tx_skbuff = kcalloc(priv->dma_tx_size,
+				  sizeof(struct sk_buff *),
+				  GFP_KERNEL);
+	if (!tx_q->tx_skbuff)
+		return -ENOMEM;
+
+	if (priv->extend_desc)
+		size = sizeof(struct dma_extended_desc);
+	else if (tx_q->tbs & STMMAC_TBS_AVAIL)
+		size = sizeof(struct dma_edesc);
+	else
+		size = sizeof(struct dma_desc);
+
+	size *= priv->dma_tx_size;
+
+	addr = dma_alloc_coherent(priv->device, size,
+				  &tx_q->dma_tx_phy, GFP_KERNEL);
+	if (!addr)
+		return -ENOMEM;
+
+	if (priv->extend_desc)
+		tx_q->dma_etx = addr;
+	else if (tx_q->tbs & STMMAC_TBS_AVAIL)
+		tx_q->dma_entx = addr;
+	else
+		tx_q->dma_tx = addr;
+
+	return 0;
+}
+
+static int alloc_dma_tx_desc_resources(struct stmmac_priv *priv)
+{
+	u32 tx_count = priv->plat->tx_queues_to_use;
+	u32 queue;
+	int ret;
+
+	/* TX queues buffers and DMA */
+	for (queue = 0; queue < tx_count; queue++) {
+		ret = __alloc_dma_tx_desc_resources(priv, queue);
+		if (ret)
+			goto err_dma;
+	}
+
+	return 0;
+
+err_dma:
+	free_dma_tx_desc_resources(priv);
+	return ret;
+}
+
+/**
+ * alloc_dma_desc_resources - alloc TX/RX resources.
+ * @priv: private structure
+ * Description: according to which descriptor can be used (extend or basic)
+ * this function allocates the resources for TX and RX paths. In case of
+ * reception, for example, it pre-allocated the RX socket buffer in order to
+ * allow zero-copy mechanism.
+ */
+static int alloc_dma_desc_resources(struct stmmac_priv *priv)
+{
+	/* RX Allocation */
+	int ret = alloc_dma_rx_desc_resources(priv);
+
+	if (ret)
+		return ret;
+
+	ret = alloc_dma_tx_desc_resources(priv);
+
+	return ret;
+}
+
+/**
+ * free_dma_desc_resources - free dma desc resources
+ * @priv: private structure
+ */
+static void free_dma_desc_resources(struct stmmac_priv *priv)
+{
+	/* Release the DMA TX socket buffers */
+	free_dma_tx_desc_resources(priv);
+
+	/* Release the DMA RX socket buffers later
+	 * to ensure all pending XDP_TX buffers are returned.
+	 */
+	free_dma_rx_desc_resources(priv);
+}
+
+/**
+ *  stmmac_mac_enable_rx_queues - Enable MAC rx queues
+ *  @priv: driver private structure
+ *  Description: It is used for enabling the rx queues in the MAC
+ */
+static void stmmac_mac_enable_rx_queues(struct stmmac_priv *priv)
+{
+	u32 rx_queues_count = priv->plat->rx_queues_to_use;
+	int queue;
+	u8 mode;
+
+	for (queue = 0; queue < rx_queues_count; queue++) {
+		mode = priv->plat->rx_queues_cfg[queue].mode_to_use;
+		stmmac_rx_queue_enable(priv, priv->hw, mode, queue);
+	}
+}
+
+/**
+ * stmmac_start_rx_dma - start RX DMA channel
+ * @priv: driver private structure
+ * @chan: RX channel index
+ * Description:
+ * This starts a RX DMA channel
+ */
+static void stmmac_start_rx_dma(struct stmmac_priv *priv, u32 chan)
+{
+	netdev_dbg(priv->dev, "DMA RX processes started in channel %d\n", chan);
+	stmmac_start_rx(priv, priv->ioaddr, chan);
+}
+
+/**
+ * stmmac_start_tx_dma - start TX DMA channel
+ * @priv: driver private structure
+ * @chan: TX channel index
+ * Description:
+ * This starts a TX DMA channel
+ */
+static void stmmac_start_tx_dma(struct stmmac_priv *priv, u32 chan)
+{
+	netdev_dbg(priv->dev, "DMA TX processes started in channel %d\n", chan);
+	stmmac_start_tx(priv, priv->ioaddr, chan);
+}
+
+/**
+ * stmmac_stop_rx_dma - stop RX DMA channel
+ * @priv: driver private structure
+ * @chan: RX channel index
+ * Description:
+ * This stops a RX DMA channel
+ */
+static void stmmac_stop_rx_dma(struct stmmac_priv *priv, u32 chan)
+{
+	netdev_dbg(priv->dev, "DMA RX processes stopped in channel %d\n", chan);
+	stmmac_stop_rx(priv, priv->ioaddr, chan);
+}
+
+/**
+ * stmmac_stop_tx_dma - stop TX DMA channel
+ * @priv: driver private structure
+ * @chan: TX channel index
+ * Description:
+ * This stops a TX DMA channel
+ */
+static void stmmac_stop_tx_dma(struct stmmac_priv *priv, u32 chan)
+{
+	netdev_dbg(priv->dev, "DMA TX processes stopped in channel %d\n", chan);
+	stmmac_stop_tx(priv, priv->ioaddr, chan);
+}
+
+/**
+ * stmmac_start_all_dma - start all RX and TX DMA channels
+ * @priv: driver private structure
+ * Description:
+ * This starts all the RX and TX DMA channels
+ */
+static void stmmac_start_all_dma(struct stmmac_priv *priv)
+{
+	u32 rx_channels_count = priv->plat->rx_queues_to_use;
+	u32 tx_channels_count = priv->plat->tx_queues_to_use;
+	u32 chan = 0;
+
+	for (chan = 0; chan < rx_channels_count; chan++)
+		stmmac_start_rx_dma(priv, chan);
+
+	for (chan = 0; chan < tx_channels_count; chan++)
+		stmmac_start_tx_dma(priv, chan);
+}
+
+/**
+ * stmmac_stop_all_dma - stop all RX and TX DMA channels
+ * @priv: driver private structure
+ * Description:
+ * This stops the RX and TX DMA channels
+ */
+static void stmmac_stop_all_dma(struct stmmac_priv *priv)
+{
+	u32 rx_channels_count = priv->plat->rx_queues_to_use;
+	u32 tx_channels_count = priv->plat->tx_queues_to_use;
+	u32 chan = 0;
+
+	for (chan = 0; chan < rx_channels_count; chan++)
+		stmmac_stop_rx_dma(priv, chan);
+
+	for (chan = 0; chan < tx_channels_count; chan++)
+		stmmac_stop_tx_dma(priv, chan);
+}
+
+/**
+ *  stmmac_dma_operation_mode - HW DMA operation mode
+ *  @priv: driver private structure
+ *  Description: it is used for configuring the DMA operation mode register in
+ *  order to program the tx/rx DMA thresholds or Store-And-Forward mode.
+ */
+static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
+{
+	u32 rx_channels_count = priv->plat->rx_queues_to_use;
+	u32 tx_channels_count = priv->plat->tx_queues_to_use;
+	int rxfifosz = priv->plat->rx_fifo_size;
+	int txfifosz = priv->plat->tx_fifo_size;
+	u32 txmode = 0;
+	u32 rxmode = 0;
+	u32 chan = 0;
+	u8 qmode = 0;
+
+	if (rxfifosz == 0)
+		rxfifosz = priv->dma_cap.rx_fifo_size;
+	if (txfifosz == 0)
+		txfifosz = priv->dma_cap.tx_fifo_size;
+
+	/* Adjust for real per queue fifo size */
+	rxfifosz /= rx_channels_count;
+	txfifosz /= tx_channels_count;
+
+	if (priv->plat->force_thresh_dma_mode) {
+		txmode = tc;
+		rxmode = tc;
+	} else if (priv->plat->force_sf_dma_mode || priv->plat->tx_coe) {
+		/*
+		 * In case of GMAC, SF mode can be enabled
+		 * to perform the TX COE in HW. This depends on:
+		 * 1) TX COE if actually supported
+		 * 2) There is no bugged Jumbo frame support
+		 *    that needs to not insert csum in the TDES.
+		 */
+		txmode = SF_DMA_MODE;
+		rxmode = SF_DMA_MODE;
+		priv->xstats.threshold = SF_DMA_MODE;
+	} else {
+		txmode = tc;
+		rxmode = SF_DMA_MODE;
+	}
+
+	/* configure all channels */
+	for (chan = 0; chan < rx_channels_count; chan++) {
+		struct stmmac_rx_queue *rx_q = &priv->rx_queue[chan];
+		u32 buf_size;
+
+		qmode = priv->plat->rx_queues_cfg[chan].mode_to_use;
+
+		stmmac_dma_rx_mode(priv, priv->ioaddr, rxmode, chan,
+				rxfifosz, qmode);
+
+		if (rx_q->xsk_pool) {
+			buf_size = xsk_pool_get_rx_frame_size(rx_q->xsk_pool);
+			stmmac_set_dma_bfsize(priv, priv->ioaddr,
+					      buf_size,
+					      chan);
+		} else {
+			stmmac_set_dma_bfsize(priv, priv->ioaddr,
+					      priv->dma_buf_sz,
+					      chan);
+		}
+	}
+
+	for (chan = 0; chan < tx_channels_count; chan++) {
+		qmode = priv->plat->tx_queues_cfg[chan].mode_to_use;
+
+		stmmac_dma_tx_mode(priv, priv->ioaddr, txmode, chan,
+				txfifosz, qmode);
+	}
+}
+
+static bool stmmac_xdp_xmit_zc(struct stmmac_priv *priv, u32 queue, u32 budget)
+{
+	struct netdev_queue *nq = netdev_get_tx_queue(priv->dev, queue);
+	struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
+	struct xsk_buff_pool *pool = tx_q->xsk_pool;
+	unsigned int entry = tx_q->cur_tx;
+	struct dma_desc *tx_desc = NULL;
+	struct xdp_desc xdp_desc;
+	bool work_done = true;
+
+	/* Avoids TX time-out as we are sharing with slow path */
+	txq_trans_cond_update(nq);
+
+	budget = min(budget, stmmac_tx_avail(priv, queue));
+
+	while (budget-- > 0) {
+		dma_addr_t dma_addr;
+		bool set_ic;
+
+		/* We are sharing with slow path and stop XSK TX desc submission when
+		 * available TX ring is less than threshold.
+		 */
+		if (unlikely(stmmac_tx_avail(priv, queue) < STMMAC_TX_XSK_AVAIL) ||
+		    !netif_carrier_ok(priv->dev)) {
+			work_done = false;
+			break;
+		}
+
+		if (!xsk_tx_peek_desc(pool, &xdp_desc))
+			break;
+
+		if (likely(priv->extend_desc))
+			tx_desc = (struct dma_desc *)(tx_q->dma_etx + entry);
+		else if (tx_q->tbs & STMMAC_TBS_AVAIL)
+			tx_desc = &tx_q->dma_entx[entry].basic;
+		else
+			tx_desc = tx_q->dma_tx + entry;
+
+		dma_addr = xsk_buff_raw_get_dma(pool, xdp_desc.addr);
+		xsk_buff_raw_dma_sync_for_device(pool, dma_addr, xdp_desc.len);
+
+		tx_q->tx_skbuff_dma[entry].buf_type = STMMAC_TXBUF_T_XSK_TX;
+
+		/* To return XDP buffer to XSK pool, we simple call
+		 * xsk_tx_completed(), so we don't need to fill up
+		 * 'buf' and 'xdpf'.
+		 */
+		tx_q->tx_skbuff_dma[entry].buf = 0;
+		tx_q->xdpf[entry] = NULL;
+
+		tx_q->tx_skbuff_dma[entry].map_as_page = false;
+		tx_q->tx_skbuff_dma[entry].len = xdp_desc.len;
+		tx_q->tx_skbuff_dma[entry].last_segment = true;
+		tx_q->tx_skbuff_dma[entry].is_jumbo = false;
+
+		stmmac_set_desc_addr(priv, tx_desc, dma_addr);
+
+		tx_q->tx_count_frames++;
+
+		if (!priv->tx_coal_frames[queue])
+			set_ic = false;
+		else if (tx_q->tx_count_frames % priv->tx_coal_frames[queue] == 0)
+			set_ic = true;
+		else
+			set_ic = false;
+
+		if (set_ic) {
+			tx_q->tx_count_frames = 0;
+			stmmac_set_tx_ic(priv, tx_desc);
+			priv->xstats.tx_set_ic_bit++;
+		}
+
+		stmmac_prepare_tx_desc(priv, tx_desc, 1, xdp_desc.len,
+				       true, priv->mode, true, true,
+				       xdp_desc.len);
+
+		stmmac_enable_dma_transmission(priv, priv->ioaddr);
+
+		tx_q->cur_tx = STMMAC_GET_ENTRY(tx_q->cur_tx, priv->dma_tx_size);
+		entry = tx_q->cur_tx;
+	}
+
+	if (tx_desc) {
+		stmmac_flush_tx_descriptors(priv, queue);
+		xsk_tx_release(pool);
+	}
+
+	/* Return true if all of the 3 conditions are met
+	 *  a) TX Budget is still available
+	 *  b) work_done = true when XSK TX desc peek is empty (no more
+	 *     pending XSK TX for transmission)
+	 */
+	return !!budget && work_done;
+}
+
+static void stmmac_bump_dma_threshold(struct stmmac_priv *priv, u32 chan)
+{
+	if (unlikely(priv->xstats.threshold != SF_DMA_MODE) && tc <= 256) {
+		tc += 64;
+
+		if (priv->plat->force_thresh_dma_mode)
+			stmmac_set_dma_operation_mode(priv, tc, tc, chan);
+		else
+			stmmac_set_dma_operation_mode(priv, tc, SF_DMA_MODE,
+						      chan);
+
+		priv->xstats.threshold = tc;
+	}
+}
+
+/**
+ * stmmac_tx_clean - to manage the transmission completion
+ * @priv: driver private structure
+ * @budget: napi budget limiting this functions packet handling
+ * @queue: TX queue index
+ * Description: it reclaims the transmit resources after transmission completes.
+ */
+static int stmmac_tx_clean(struct stmmac_priv *priv, int budget, u32 queue)
+{
+	struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
+	unsigned int bytes_compl = 0, pkts_compl = 0;
+	unsigned int entry, xmits = 0, count = 0;
+
+	__netif_tx_lock_bh(netdev_get_tx_queue(priv->dev, queue));
+
+	priv->xstats.tx_clean++;
+
+	tx_q->xsk_frames_done = 0;
+
+	entry = tx_q->dirty_tx;
+
+	/* Try to clean all TX complete frame in 1 shot */
+	while ((entry != tx_q->cur_tx) && count < priv->dma_tx_size) {
+		struct xdp_frame *xdpf;
+		struct sk_buff *skb;
+		struct dma_desc *p;
+		int status;
+
+		if (tx_q->tx_skbuff_dma[entry].buf_type == STMMAC_TXBUF_T_XDP_TX ||
+		    tx_q->tx_skbuff_dma[entry].buf_type == STMMAC_TXBUF_T_XDP_NDO) {
+			xdpf = tx_q->xdpf[entry];
+			skb = NULL;
+		} else if (tx_q->tx_skbuff_dma[entry].buf_type == STMMAC_TXBUF_T_SKB) {
+			xdpf = NULL;
+			skb = tx_q->tx_skbuff[entry];
+		} else {
+			xdpf = NULL;
+			skb = NULL;
+		}
+
+		if (priv->extend_desc)
+			p = (struct dma_desc *)(tx_q->dma_etx + entry);
+		else if (tx_q->tbs & STMMAC_TBS_AVAIL)
+			p = &tx_q->dma_entx[entry].basic;
+		else
+			p = tx_q->dma_tx + entry;
+
+		status = stmmac_tx_status(priv, &priv->dev->stats,
+				&priv->xstats, p, priv->ioaddr);
+		/* Check if the descriptor is owned by the DMA */
+		if (unlikely(status & tx_dma_own))
+			break;
+
+		count++;
+
+		/* Make sure descriptor fields are read after reading
+		 * the own bit.
+		 */
+		dma_rmb();
+
+		/* Just consider the last segment and ...*/
+		if (likely(!(status & tx_not_ls))) {
+			/* ... verify the status error condition */
+			if (unlikely(status & tx_err)) {
+				priv->dev->stats.tx_errors++;
+				if (unlikely(status & tx_err_bump_tc))
+					stmmac_bump_dma_threshold(priv, queue);
+			} else {
+				priv->dev->stats.tx_packets++;
+				priv->xstats.tx_pkt_n++;
+				priv->xstats.txq_stats[queue].tx_pkt_n++;
+			}
+			if (skb)
+				stmmac_get_tx_hwtstamp(priv, p, skb);
+		}
+
+		if (likely(tx_q->tx_skbuff_dma[entry].buf &&
+			   tx_q->tx_skbuff_dma[entry].buf_type != STMMAC_TXBUF_T_XDP_TX)) {
+			if (tx_q->tx_skbuff_dma[entry].map_as_page)
+				dma_unmap_page(priv->device,
+					       tx_q->tx_skbuff_dma[entry].buf,
+					       tx_q->tx_skbuff_dma[entry].len,
+					       DMA_TO_DEVICE);
+			else
+				dma_unmap_single(priv->device,
+						 tx_q->tx_skbuff_dma[entry].buf,
+						 tx_q->tx_skbuff_dma[entry].len,
+						 DMA_TO_DEVICE);
+			tx_q->tx_skbuff_dma[entry].buf = 0;
+			tx_q->tx_skbuff_dma[entry].len = 0;
+			tx_q->tx_skbuff_dma[entry].map_as_page = false;
+		}
+
+		stmmac_clean_desc3(priv, tx_q, p);
+
+		tx_q->tx_skbuff_dma[entry].last_segment = false;
+		tx_q->tx_skbuff_dma[entry].is_jumbo = false;
+
+		if (xdpf &&
+		    tx_q->tx_skbuff_dma[entry].buf_type == STMMAC_TXBUF_T_XDP_TX) {
+			xdp_return_frame_rx_napi(xdpf);
+			tx_q->xdpf[entry] = NULL;
+		}
+
+		if (xdpf &&
+		    tx_q->tx_skbuff_dma[entry].buf_type == STMMAC_TXBUF_T_XDP_NDO) {
+			xdp_return_frame(xdpf);
+			tx_q->xdpf[entry] = NULL;
+		}
+
+		if (tx_q->tx_skbuff_dma[entry].buf_type == STMMAC_TXBUF_T_XSK_TX)
+			tx_q->xsk_frames_done++;
+
+		if (tx_q->tx_skbuff_dma[entry].buf_type == STMMAC_TXBUF_T_SKB) {
+			if (likely(skb)) {
+				pkts_compl++;
+				bytes_compl += skb->len;
+				dev_consume_skb_any(skb);
+				tx_q->tx_skbuff[entry] = NULL;
+			}
+		}
+
+		stmmac_release_tx_desc(priv, p, priv->mode);
+
+		entry = STMMAC_GET_ENTRY(entry, priv->dma_tx_size);
+	}
+	tx_q->dirty_tx = entry;
+
+	netdev_tx_completed_queue(netdev_get_tx_queue(priv->dev, queue),
+				  pkts_compl, bytes_compl);
+
+	if (unlikely(netif_tx_queue_stopped(netdev_get_tx_queue(priv->dev,
+								queue))) &&
+	    stmmac_tx_avail(priv, queue) > STMMAC_TX_THRESH(priv)) {
+
+		netif_dbg(priv, tx_done, priv->dev,
+			  "%s: restart transmit\n", __func__);
+		netif_tx_wake_queue(netdev_get_tx_queue(priv->dev, queue));
+	}
+
+	if (tx_q->xsk_pool) {
+		bool work_done;
+
+		if (tx_q->xsk_frames_done)
+			xsk_tx_completed(tx_q->xsk_pool, tx_q->xsk_frames_done);
+
+		if (xsk_uses_need_wakeup(tx_q->xsk_pool))
+			xsk_set_tx_need_wakeup(tx_q->xsk_pool);
+
+		/* For XSK TX, we try to send as many as possible.
+		 * If XSK work done (XSK TX desc empty and budget still
+		 * available), return "budget - 1" to reenable TX IRQ.
+		 * Else, return "budget" to make NAPI continue polling.
+		 */
+		work_done = stmmac_xdp_xmit_zc(priv, queue,
+					       STMMAC_XSK_TX_BUDGET_MAX);
+		if (work_done)
+			xmits = budget - 1;
+		else
+			xmits = budget;
+	}
+
+	if (priv->eee_enabled && !priv->tx_path_in_lpi_mode &&
+	    priv->eee_sw_timer_en) {
+		stmmac_enable_eee_mode(priv);
+		mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(priv->tx_lpi_timer));
+	}
+
+	/* We still have pending packets, let's call for a new scheduling */
+	if (tx_q->dirty_tx != tx_q->cur_tx)
+		hrtimer_start(&tx_q->txtimer,
+			      STMMAC_COAL_TIMER(priv->tx_coal_timer[queue]),
+			      HRTIMER_MODE_REL);
+
+	__netif_tx_unlock_bh(netdev_get_tx_queue(priv->dev, queue));
+
+	/* Combine decisions from TX clean and XSK TX */
+	return max(count, xmits);
+}
+
+/**
+ * stmmac_tx_err - to manage the tx error
+ * @priv: driver private structure
+ * @chan: channel index
+ * Description: it cleans the descriptors and restarts the transmission
+ * in case of transmission errors.
+ */
+static void stmmac_tx_err(struct stmmac_priv *priv, u32 chan)
+{
+	struct stmmac_tx_queue *tx_q = &priv->tx_queue[chan];
+
+	netif_tx_stop_queue(netdev_get_tx_queue(priv->dev, chan));
+
+	stmmac_stop_tx_dma(priv, chan);
+	dma_free_tx_skbufs(priv, chan);
+	stmmac_clear_tx_descriptors(priv, chan);
+	tx_q->dirty_tx = 0;
+	tx_q->cur_tx = 0;
+	tx_q->mss = 0;
+	netdev_tx_reset_queue(netdev_get_tx_queue(priv->dev, chan));
+	stmmac_init_tx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
+			    tx_q->dma_tx_phy, chan);
+	stmmac_start_tx_dma(priv, chan);
+
+	priv->dev->stats.tx_errors++;
+	netif_tx_wake_queue(netdev_get_tx_queue(priv->dev, chan));
+}
+
+/**
+ *  stmmac_set_dma_operation_mode - Set DMA operation mode by channel
+ *  @priv: driver private structure
+ *  @txmode: TX operating mode
+ *  @rxmode: RX operating mode
+ *  @chan: channel index
+ *  Description: it is used for configuring of the DMA operation mode in
+ *  runtime in order to program the tx/rx DMA thresholds or Store-And-Forward
+ *  mode.
+ */
+static void stmmac_set_dma_operation_mode(struct stmmac_priv *priv, u32 txmode,
+					  u32 rxmode, u32 chan)
+{
+	u8 rxqmode = priv->plat->rx_queues_cfg[chan].mode_to_use;
+	u8 txqmode = priv->plat->tx_queues_cfg[chan].mode_to_use;
+	u32 rx_channels_count = priv->plat->rx_queues_to_use;
+	u32 tx_channels_count = priv->plat->tx_queues_to_use;
+	int rxfifosz = priv->plat->rx_fifo_size;
+	int txfifosz = priv->plat->tx_fifo_size;
+
+	if (rxfifosz == 0)
+		rxfifosz = priv->dma_cap.rx_fifo_size;
+	if (txfifosz == 0)
+		txfifosz = priv->dma_cap.tx_fifo_size;
+
+	/* Adjust for real per queue fifo size */
+	rxfifosz /= rx_channels_count;
+	txfifosz /= tx_channels_count;
+
+	stmmac_dma_rx_mode(priv, priv->ioaddr, rxmode, chan, rxfifosz, rxqmode);
+	stmmac_dma_tx_mode(priv, priv->ioaddr, txmode, chan, txfifosz, txqmode);
+}
+
+static bool stmmac_safety_feat_interrupt(struct stmmac_priv *priv)
+{
+	int ret;
+
+	ret = stmmac_safety_feat_irq_status(priv, priv->dev,
+			priv->ioaddr, priv->dma_cap.asp, &priv->sstats);
+	if (ret && (ret != -EINVAL)) {
+		stmmac_global_err(priv);
+		return true;
+	}
+
+	return false;
+}
+
+static int stmmac_napi_check(struct stmmac_priv *priv, u32 chan, u32 dir)
+{
+	int status = stmmac_dma_interrupt_status(priv, priv->ioaddr,
+						 &priv->xstats, chan, dir);
+	struct stmmac_rx_queue *rx_q = &priv->rx_queue[chan];
+	struct stmmac_tx_queue *tx_q = &priv->tx_queue[chan];
+	struct stmmac_channel *ch = &priv->channel[chan];
+	struct napi_struct *rx_napi;
+	struct napi_struct *tx_napi;
+	unsigned long flags;
+
+	rx_napi = rx_q->xsk_pool ? &ch->rxtx_napi : &ch->rx_napi;
+	tx_napi = tx_q->xsk_pool ? &ch->rxtx_napi : &ch->tx_napi;
+
+	if ((status & handle_rx) && (chan < priv->plat->rx_queues_to_use)) {
+		if (napi_schedule_prep(rx_napi)) {
+			spin_lock_irqsave(&ch->lock, flags);
+			stmmac_disable_dma_irq(priv, priv->ioaddr, chan, 1, 0);
+			spin_unlock_irqrestore(&ch->lock, flags);
+			__napi_schedule(rx_napi);
+		}
+	}
+
+	if ((status & handle_tx) && (chan < priv->plat->tx_queues_to_use)) {
+		if (napi_schedule_prep(tx_napi)) {
+			spin_lock_irqsave(&ch->lock, flags);
+			stmmac_disable_dma_irq(priv, priv->ioaddr, chan, 0, 1);
+			spin_unlock_irqrestore(&ch->lock, flags);
+			__napi_schedule(tx_napi);
+		}
+	}
+
+	return status;
+}
+
+/**
+ * stmmac_dma_interrupt - DMA ISR
+ * @priv: driver private structure
+ * Description: this is the DMA ISR. It is called by the main ISR.
+ * It calls the dwmac dma routine and schedule poll method in case of some
+ * work can be done.
+ */
+static void stmmac_dma_interrupt(struct stmmac_priv *priv)
+{
+	u32 tx_channel_count = priv->plat->tx_queues_to_use;
+	u32 rx_channel_count = priv->plat->rx_queues_to_use;
+	u32 channels_to_check = tx_channel_count > rx_channel_count ?
+				tx_channel_count : rx_channel_count;
+	u32 chan;
+	int status[max_t(u32, MTL_MAX_TX_QUEUES, MTL_MAX_RX_QUEUES)];
+
+	/* Make sure we never check beyond our status buffer. */
+	if (WARN_ON_ONCE(channels_to_check > ARRAY_SIZE(status)))
+		channels_to_check = ARRAY_SIZE(status);
+
+	for (chan = 0; chan < channels_to_check; chan++)
+		status[chan] = stmmac_napi_check(priv, chan,
+						 DMA_DIR_RXTX);
+
+	for (chan = 0; chan < tx_channel_count; chan++) {
+		if (unlikely(status[chan] & tx_hard_error_bump_tc)) {
+			/* Try to bump up the dma threshold on this failure */
+			stmmac_bump_dma_threshold(priv, chan);
+		} else if (unlikely(status[chan] == tx_hard_error)) {
+			stmmac_tx_err(priv, chan);
+		}
+	}
+}
+
+/**
+ * stmmac_mmc_setup: setup the Mac Management Counters (MMC)
+ * @priv: driver private structure
+ * Description: this masks the MMC irq, in fact, the counters are managed in SW.
+ */
+static void stmmac_mmc_setup(struct stmmac_priv *priv)
+{
+	unsigned int mode = MMC_CNTRL_RESET_ON_READ | MMC_CNTRL_COUNTER_RESET |
+			    MMC_CNTRL_PRESET | MMC_CNTRL_FULL_HALF_PRESET;
+
+	stmmac_mmc_intr_all_mask(priv, priv->mmcaddr);
+
+	if (priv->dma_cap.rmon) {
+		stmmac_mmc_ctrl(priv, priv->mmcaddr, mode);
+		memset(&priv->mmc, 0, sizeof(struct stmmac_counters));
+	} else
+		netdev_info(priv->dev, "No MAC Management Counters available\n");
+}
+
+/**
+ * stmmac_get_hw_features - get MAC capabilities from the HW cap. register.
+ * @priv: driver private structure
+ * Description:
+ *  new GMAC chip generations have a new register to indicate the
+ *  presence of the optional feature/functions.
+ *  This can be also used to override the value passed through the
+ *  platform and necessary for old MAC10/100 and GMAC chips.
+ */
+static int stmmac_get_hw_features(struct stmmac_priv *priv)
+{
+	return stmmac_get_hw_feature(priv, priv->ioaddr, &priv->dma_cap) == 0;
+}
+
+/**
+ * stmmac_check_ether_addr - check if the MAC addr is valid
+ * @priv: driver private structure
+ * Description:
+ * it is to verify if the MAC address is valid, in case of failures it
+ * generates a random MAC address
+ */
+static void stmmac_check_ether_addr(struct stmmac_priv *priv)
+{
+	u8 addr[ETH_ALEN];
+
+	if (!is_valid_ether_addr(priv->dev->dev_addr)) {
+		stmmac_get_umac_addr(priv, priv->hw, addr, 0);
+		if (is_valid_ether_addr(addr))
+			eth_hw_addr_set(priv->dev, addr);
+		else
+			eth_hw_addr_random(priv->dev);
+		dev_info(priv->device, "device MAC address %pM\n",
+			 priv->dev->dev_addr);
+	}
+}
+
+/**
+ * stmmac_init_dma_engine - DMA init.
+ * @priv: driver private structure
+ * Description:
+ * It inits the DMA invoking the specific MAC/GMAC callback.
+ * Some DMA parameters can be passed from the platform;
+ * in case of these are not passed a default is kept for the MAC or GMAC.
+ */
+static int stmmac_init_dma_engine(struct stmmac_priv *priv)
+{
+	u32 rx_channels_count = priv->plat->rx_queues_to_use;
+	u32 tx_channels_count = priv->plat->tx_queues_to_use;
+	u32 dma_csr_ch = max(rx_channels_count, tx_channels_count);
+	struct stmmac_rx_queue *rx_q;
+	struct stmmac_tx_queue *tx_q;
+	u32 chan = 0;
+	int atds = 0;
+	int ret = 0;
+
+	if (!priv->plat->dma_cfg || !priv->plat->dma_cfg->pbl) {
+		dev_err(priv->device, "Invalid DMA configuration\n");
+		return -EINVAL;
+	}
+
+	if (priv->extend_desc && (priv->mode == STMMAC_RING_MODE))
+		atds = 1;
+
+	ret = stmmac_reset(priv, priv->ioaddr);
+	if (ret) {
+		dev_err(priv->device, "Failed to reset the dma\n");
+		return ret;
+	}
+
+	/* DMA Configuration */
+	stmmac_dma_init(priv, priv->ioaddr, priv->plat->dma_cfg, atds);
+
+	if (priv->plat->axi)
+		stmmac_axi(priv, priv->ioaddr, priv->plat->axi);
+
+	/* DMA CSR Channel configuration */
+	for (chan = 0; chan < dma_csr_ch; chan++)
+		stmmac_init_chan(priv, priv->ioaddr, priv->plat->dma_cfg, chan);
+
+	/* DMA RX Channel Configuration */
+	for (chan = 0; chan < rx_channels_count; chan++) {
+		rx_q = &priv->rx_queue[chan];
+
+		stmmac_init_rx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
+				    rx_q->dma_rx_phy, chan);
+
+		rx_q->rx_tail_addr = rx_q->dma_rx_phy +
+				     (rx_q->buf_alloc_num *
+				      sizeof(struct dma_desc));
+		stmmac_set_rx_tail_ptr(priv, priv->ioaddr,
+				       rx_q->rx_tail_addr, chan);
+	}
+
+	/* DMA TX Channel Configuration */
+	for (chan = 0; chan < tx_channels_count; chan++) {
+		tx_q = &priv->tx_queue[chan];
+
+		stmmac_init_tx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
+				    tx_q->dma_tx_phy, chan);
+
+		tx_q->tx_tail_addr = tx_q->dma_tx_phy;
+		stmmac_set_tx_tail_ptr(priv, priv->ioaddr,
+				       tx_q->tx_tail_addr, chan);
+	}
+
+	return ret;
+}
+
+static void stmmac_tx_timer_arm(struct stmmac_priv *priv, u32 queue)
+{
+	struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
+
+	hrtimer_start(&tx_q->txtimer,
+		      STMMAC_COAL_TIMER(priv->tx_coal_timer[queue]),
+		      HRTIMER_MODE_REL);
+}
+
+/**
+ * stmmac_tx_timer - mitigation sw timer for tx.
+ * @t: data pointer
+ * Description:
+ * This is the timer handler to directly invoke the stmmac_tx_clean.
+ */
+static enum hrtimer_restart stmmac_tx_timer(struct hrtimer *t)
+{
+	struct stmmac_tx_queue *tx_q = container_of(t, struct stmmac_tx_queue, txtimer);
+	struct stmmac_priv *priv = tx_q->priv_data;
+	struct stmmac_channel *ch;
+	struct napi_struct *napi;
+
+	ch = &priv->channel[tx_q->queue_index];
+	napi = tx_q->xsk_pool ? &ch->rxtx_napi : &ch->tx_napi;
+
+	if (likely(napi_schedule_prep(napi))) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&ch->lock, flags);
+		stmmac_disable_dma_irq(priv, priv->ioaddr, ch->index, 0, 1);
+		spin_unlock_irqrestore(&ch->lock, flags);
+		__napi_schedule(napi);
+	}
+
+	return HRTIMER_NORESTART;
+}
+
+/**
+ * stmmac_init_coalesce - init mitigation options.
+ * @priv: driver private structure
+ * Description:
+ * This inits the coalesce parameters: i.e. timer rate,
+ * timer handler and default threshold used for enabling the
+ * interrupt on completion bit.
+ */
+static void stmmac_init_coalesce(struct stmmac_priv *priv)
+{
+	u32 tx_channel_count = priv->plat->tx_queues_to_use;
+	u32 rx_channel_count = priv->plat->rx_queues_to_use;
+	u32 chan;
+
+	for (chan = 0; chan < tx_channel_count; chan++) {
+		struct stmmac_tx_queue *tx_q = &priv->tx_queue[chan];
+
+		priv->tx_coal_frames[chan] = STMMAC_TX_FRAMES;
+		priv->tx_coal_timer[chan] = STMMAC_COAL_TX_TIMER;
+
+		hrtimer_init(&tx_q->txtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+		tx_q->txtimer.function = stmmac_tx_timer;
+	}
+
+	for (chan = 0; chan < rx_channel_count; chan++)
+		priv->rx_coal_frames[chan] = STMMAC_RX_FRAMES;
+}
+
+static void stmmac_set_rings_length(struct stmmac_priv *priv)
+{
+	u32 rx_channels_count = priv->plat->rx_queues_to_use;
+	u32 tx_channels_count = priv->plat->tx_queues_to_use;
+	u32 chan;
+
+	/* set TX ring length */
+	for (chan = 0; chan < tx_channels_count; chan++)
+		stmmac_set_tx_ring_len(priv, priv->ioaddr,
+				       (priv->dma_tx_size - 1), chan);
+
+	/* set RX ring length */
+	for (chan = 0; chan < rx_channels_count; chan++)
+		stmmac_set_rx_ring_len(priv, priv->ioaddr,
+				       (priv->dma_rx_size - 1), chan);
+}
+
+/**
+ *  stmmac_set_tx_queue_weight - Set TX queue weight
+ *  @priv: driver private structure
+ *  Description: It is used for setting TX queues weight
+ */
+static void stmmac_set_tx_queue_weight(struct stmmac_priv *priv)
+{
+	u32 tx_queues_count = priv->plat->tx_queues_to_use;
+	u32 weight;
+	u32 queue;
+
+	for (queue = 0; queue < tx_queues_count; queue++) {
+		weight = priv->plat->tx_queues_cfg[queue].weight;
+		stmmac_set_mtl_tx_queue_weight(priv, priv->hw, weight, queue);
+	}
+}
+
+/**
+ *  stmmac_configure_cbs - Configure CBS in TX queue
+ *  @priv: driver private structure
+ *  Description: It is used for configuring CBS in AVB TX queues
+ */
+static void stmmac_configure_cbs(struct stmmac_priv *priv)
+{
+	u32 tx_queues_count = priv->plat->tx_queues_to_use;
+	u32 mode_to_use;
+	u32 queue;
+
+	/* queue 0 is reserved for legacy traffic */
+	for (queue = 1; queue < tx_queues_count; queue++) {
+		mode_to_use = priv->plat->tx_queues_cfg[queue].mode_to_use;
+		if (mode_to_use == MTL_QUEUE_DCB)
+			continue;
+
+		stmmac_config_cbs(priv, priv->hw,
+				priv->plat->tx_queues_cfg[queue].send_slope,
+				priv->plat->tx_queues_cfg[queue].idle_slope,
+				priv->plat->tx_queues_cfg[queue].high_credit,
+				priv->plat->tx_queues_cfg[queue].low_credit,
+				queue);
+	}
+}
+
+/**
+ *  stmmac_rx_queue_dma_chan_map - Map RX queue to RX dma channel
+ *  @priv: driver private structure
+ *  Description: It is used for mapping RX queues to RX dma channels
+ */
+static void stmmac_rx_queue_dma_chan_map(struct stmmac_priv *priv)
+{
+	u32 rx_queues_count = priv->plat->rx_queues_to_use;
+	u32 queue;
+	u32 chan;
+
+	for (queue = 0; queue < rx_queues_count; queue++) {
+		chan = priv->plat->rx_queues_cfg[queue].chan;
+		stmmac_map_mtl_to_dma(priv, priv->hw, queue, chan);
+	}
+}
+
+/**
+ *  stmmac_mac_config_rx_queues_prio - Configure RX Queue priority
+ *  @priv: driver private structure
+ *  Description: It is used for configuring the RX Queue Priority
+ */
+static void stmmac_mac_config_rx_queues_prio(struct stmmac_priv *priv)
+{
+	u32 rx_queues_count = priv->plat->rx_queues_to_use;
+	u32 queue;
+	u32 prio;
+
+	for (queue = 0; queue < rx_queues_count; queue++) {
+		if (!priv->plat->rx_queues_cfg[queue].use_prio)
+			continue;
+
+		prio = priv->plat->rx_queues_cfg[queue].prio;
+		stmmac_rx_queue_prio(priv, priv->hw, prio, queue);
+	}
+}
+
+/**
+ *  stmmac_mac_config_tx_queues_prio - Configure TX Queue priority
+ *  @priv: driver private structure
+ *  Description: It is used for configuring the TX Queue Priority
+ */
+static void stmmac_mac_config_tx_queues_prio(struct stmmac_priv *priv)
+{
+	u32 tx_queues_count = priv->plat->tx_queues_to_use;
+	u32 queue;
+	u32 prio;
+
+	for (queue = 0; queue < tx_queues_count; queue++) {
+		if (!priv->plat->tx_queues_cfg[queue].use_prio)
+			continue;
+
+		prio = priv->plat->tx_queues_cfg[queue].prio;
+		stmmac_tx_queue_prio(priv, priv->hw, prio, queue);
+	}
+}
+
+/**
+ *  stmmac_mac_config_rx_queues_routing - Configure RX Queue Routing
+ *  @priv: driver private structure
+ *  Description: It is used for configuring the RX queue routing
+ */
+static void stmmac_mac_config_rx_queues_routing(struct stmmac_priv *priv)
+{
+	u32 rx_queues_count = priv->plat->rx_queues_to_use;
+	u32 queue;
+	u8 packet;
+
+	for (queue = 0; queue < rx_queues_count; queue++) {
+		/* no specific packet type routing specified for the queue */
+		if (priv->plat->rx_queues_cfg[queue].pkt_route == 0x0)
+			continue;
+
+		packet = priv->plat->rx_queues_cfg[queue].pkt_route;
+		stmmac_rx_queue_routing(priv, priv->hw, packet, queue);
+	}
+}
+
+static void stmmac_mac_config_rss(struct stmmac_priv *priv)
+{
+	if (!priv->dma_cap.rssen || !priv->plat->rss_en) {
+		priv->rss.enable = false;
+		return;
+	}
+
+	if (priv->dev->features & NETIF_F_RXHASH)
+		priv->rss.enable = true;
+	else
+		priv->rss.enable = false;
+
+	stmmac_rss_configure(priv, priv->hw, &priv->rss,
+			     priv->plat->rx_queues_to_use);
+}
+
+/**
+ *  stmmac_mtl_configuration - Configure MTL
+ *  @priv: driver private structure
+ *  Description: It is used for configurring MTL
+ */
+static void stmmac_mtl_configuration(struct stmmac_priv *priv)
+{
+	u32 rx_queues_count = priv->plat->rx_queues_to_use;
+	u32 tx_queues_count = priv->plat->tx_queues_to_use;
+
+	if (tx_queues_count > 1)
+		stmmac_set_tx_queue_weight(priv);
+
+	/* Configure MTL RX algorithms */
+	if (rx_queues_count > 1)
+		stmmac_prog_mtl_rx_algorithms(priv, priv->hw,
+				priv->plat->rx_sched_algorithm);
+
+	/* Configure MTL TX algorithms */
+	if (tx_queues_count > 1)
+		stmmac_prog_mtl_tx_algorithms(priv, priv->hw,
+				priv->plat->tx_sched_algorithm);
+
+	/* Configure CBS in AVB TX queues */
+	if (tx_queues_count > 1)
+		stmmac_configure_cbs(priv);
+
+	/* Map RX MTL to DMA channels */
+	stmmac_rx_queue_dma_chan_map(priv);
+
+	/* Enable MAC RX Queues */
+	stmmac_mac_enable_rx_queues(priv);
+
+	/* Set RX priorities */
+	if (rx_queues_count > 1)
+		stmmac_mac_config_rx_queues_prio(priv);
+
+	/* Set TX priorities */
+	if (tx_queues_count > 1)
+		stmmac_mac_config_tx_queues_prio(priv);
+
+	/* Set RX routing */
+	if (rx_queues_count > 1)
+		stmmac_mac_config_rx_queues_routing(priv);
+
+	/* Receive Side Scaling */
+	if (rx_queues_count > 1)
+		stmmac_mac_config_rss(priv);
+}
+
+static void stmmac_safety_feat_configuration(struct stmmac_priv *priv)
+{
+	if (priv->dma_cap.asp) {
+		netdev_info(priv->dev, "Enabling Safety Features\n");
+		stmmac_safety_feat_config(priv, priv->ioaddr, priv->dma_cap.asp,
+					  priv->plat->safety_feat_cfg);
+	} else {
+		netdev_info(priv->dev, "No Safety Features support found\n");
+	}
+}
+
+static int stmmac_fpe_start_wq(struct stmmac_priv *priv)
+{
+	char *name;
+
+	clear_bit(__FPE_TASK_SCHED, &priv->fpe_task_state);
+	clear_bit(__FPE_REMOVING,  &priv->fpe_task_state);
+
+	name = priv->wq_name;
+	sprintf(name, "%s-fpe", priv->dev->name);
+
+	priv->fpe_wq = create_singlethread_workqueue(name);
+	if (!priv->fpe_wq) {
+		netdev_err(priv->dev, "%s: Failed to create workqueue\n", name);
+
+		return -ENOMEM;
+	}
+	netdev_info(priv->dev, "FPE workqueue start");
+
+	return 0;
+}
+
+/**
+ * stmmac_hw_setup - setup mac in a usable state.
+ *  @dev : pointer to the device structure.
+ *  @init_ptp: initialize PTP if set
+ *  Description:
+ *  this is the main function to setup the HW in a usable state because the
+ *  dma engine is reset, the core registers are configured (e.g. AXI,
+ *  Checksum features, timers). The DMA is ready to start receiving and
+ *  transmitting.
+ *  Return value:
+ *  0 on success and an appropriate (-)ve integer as defined in errno.h
+ *  file on failure.
+ */
+static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	u32 rx_cnt = priv->plat->rx_queues_to_use;
+	u32 tx_cnt = priv->plat->tx_queues_to_use;
+	bool sph_en;
+	u32 chan;
+	int ret;
+
+	/* DMA initialization and SW reset */
+	ret = stmmac_init_dma_engine(priv);
+	if (ret < 0) {
+		netdev_err(priv->dev, "%s: DMA engine initialization failed\n",
+			   __func__);
+		return ret;
+	}
+
+	/* Copy the MAC addr into the HW  */
+	stmmac_set_umac_addr(priv, priv->hw, dev->dev_addr, 0);
+
+	/* PS and related bits will be programmed according to the speed */
+	if (priv->hw->pcs) {
+		int speed = priv->plat->mac_port_sel_speed;
+
+		if ((speed == SPEED_10) || (speed == SPEED_100) ||
+		    (speed == SPEED_1000)) {
+			priv->hw->ps = speed;
+		} else {
+			dev_warn(priv->device, "invalid port speed\n");
+			priv->hw->ps = 0;
+		}
+	}
+
+	/* Initialize the MAC Core */
+	stmmac_core_init(priv, priv->hw, dev);
+
+	/* Initialize MTL*/
+	stmmac_mtl_configuration(priv);
+
+	/* Initialize Safety Features */
+	stmmac_safety_feat_configuration(priv);
+
+	ret = stmmac_rx_ipc(priv, priv->hw);
+	if (!ret) {
+		netdev_warn(priv->dev, "RX IPC Checksum Offload disabled\n");
+		priv->plat->rx_coe = STMMAC_RX_COE_NONE;
+		priv->hw->rx_csum = 0;
+	}
+
+	/* Enable the MAC Rx/Tx */
+	stmmac_mac_set(priv, priv->ioaddr, true);
+
+	/* Set the HW DMA mode and the COE */
+	stmmac_dma_operation_mode(priv);
+
+	stmmac_mmc_setup(priv);
+
+	if (init_ptp) {
+		ret = stmmac_init_ptp(priv);
+		if (ret == -EOPNOTSUPP)
+			netdev_warn(priv->dev, "PTP not supported by HW\n");
+		else if (ret)
+			netdev_warn(priv->dev, "PTP init failed\n");
+	}
+
+	priv->eee_tw_timer = STMMAC_DEFAULT_TWT_LS;
+
+	/* Convert the timer from msec to usec */
+	if (!priv->tx_lpi_timer)
+		priv->tx_lpi_timer = eee_timer * 1000;
+
+	if (priv->use_riwt) {
+		u32 queue;
+
+		for (queue = 0; queue < rx_cnt; queue++) {
+			if (!priv->rx_riwt[queue])
+				priv->rx_riwt[queue] = DEF_DMA_RIWT;
+
+			stmmac_rx_watchdog(priv, priv->ioaddr,
+					   priv->rx_riwt[queue], queue);
+		}
+	}
+
+	if (priv->hw->pcs)
+		stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 1, priv->hw->ps, 0);
+
+	/* set TX and RX rings length */
+	stmmac_set_rings_length(priv);
+
+	/* Enable TSO */
+	if (priv->tso) {
+		for (chan = 0; chan < tx_cnt; chan++) {
+			struct stmmac_tx_queue *tx_q = &priv->tx_queue[chan];
+
+			/* TSO and TBS cannot co-exist */
+			if (tx_q->tbs & STMMAC_TBS_AVAIL)
+				continue;
+
+			stmmac_enable_tso(priv, priv->ioaddr, 1, chan);
+		}
+	}
+
+	/* Enable Split Header */
+	sph_en = (priv->hw->rx_csum > 0) && priv->sph;
+	for (chan = 0; chan < rx_cnt; chan++)
+		stmmac_enable_sph(priv, priv->ioaddr, sph_en, chan);
+
+
+	/* VLAN Tag Insertion */
+	if (priv->dma_cap.vlins)
+		stmmac_enable_vlan(priv, priv->hw, STMMAC_VLAN_INSERT);
+
+	/* TBS */
+	for (chan = 0; chan < tx_cnt; chan++) {
+		struct stmmac_tx_queue *tx_q = &priv->tx_queue[chan];
+		int enable = tx_q->tbs & STMMAC_TBS_AVAIL;
+
+		stmmac_enable_tbs(priv, priv->ioaddr, enable, chan);
+	}
+
+	/* Configure real RX and TX queues */
+	netif_set_real_num_rx_queues(dev, priv->plat->rx_queues_to_use);
+	netif_set_real_num_tx_queues(dev, priv->plat->tx_queues_to_use);
+
+	/* Start the ball rolling... */
+	stmmac_start_all_dma(priv);
+
+	if (priv->dma_cap.fpesel) {
+		stmmac_fpe_start_wq(priv);
+
+		if (priv->plat->fpe_cfg->enable)
+			stmmac_fpe_handshake(priv, true);
+	}
+
+	return 0;
+}
+
+static void stmmac_hw_teardown(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	clk_disable_unprepare(priv->plat->clk_ptp_ref);
+}
+
+static void stmmac_free_irq(struct net_device *dev,
+			    enum request_irq_err irq_err, int irq_idx)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	int j;
+
+	switch (irq_err) {
+	case REQ_IRQ_ERR_ALL:
+		irq_idx = priv->plat->tx_queues_to_use;
+		fallthrough;
+	case REQ_IRQ_ERR_TX:
+		for (j = irq_idx - 1; j >= 0; j--) {
+			if (priv->tx_irq[j] > 0) {
+				irq_set_affinity_hint(priv->tx_irq[j], NULL);
+				free_irq(priv->tx_irq[j], &priv->tx_queue[j]);
+			}
+		}
+		irq_idx = priv->plat->rx_queues_to_use;
+		fallthrough;
+	case REQ_IRQ_ERR_RX:
+		for (j = irq_idx - 1; j >= 0; j--) {
+			if (priv->rx_irq[j] > 0) {
+				irq_set_affinity_hint(priv->rx_irq[j], NULL);
+				free_irq(priv->rx_irq[j], &priv->rx_queue[j]);
+			}
+		}
+
+		if (priv->sfty_ue_irq > 0 && priv->sfty_ue_irq != dev->irq)
+			free_irq(priv->sfty_ue_irq, dev);
+		fallthrough;
+	case REQ_IRQ_ERR_SFTY_UE:
+		if (priv->sfty_ce_irq > 0 && priv->sfty_ce_irq != dev->irq)
+			free_irq(priv->sfty_ce_irq, dev);
+		fallthrough;
+	case REQ_IRQ_ERR_SFTY_CE:
+		if (priv->lpi_irq > 0 && priv->lpi_irq != dev->irq)
+			free_irq(priv->lpi_irq, dev);
+		fallthrough;
+	case REQ_IRQ_ERR_LPI:
+		if (priv->wol_irq > 0 && priv->wol_irq != dev->irq)
+			free_irq(priv->wol_irq, dev);
+		fallthrough;
+	case REQ_IRQ_ERR_WOL:
+		free_irq(dev->irq, dev);
+		fallthrough;
+	case REQ_IRQ_ERR_MAC:
+	case REQ_IRQ_ERR_NO:
+		/* If MAC IRQ request error, no more IRQ to free */
+		break;
+	}
+}
+
+static int stmmac_request_irq_multi_msi(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	enum request_irq_err irq_err;
+	cpumask_t cpu_mask;
+	int irq_idx = 0;
+	char *int_name;
+	int ret;
+	int i;
+
+	/* For common interrupt */
+	int_name = priv->int_name_mac;
+	sprintf(int_name, "%s:%s", dev->name, "mac");
+	ret = request_irq(dev->irq, stmmac_mac_interrupt,
+			  0, int_name, dev);
+	if (unlikely(ret < 0)) {
+		netdev_err(priv->dev,
+			   "%s: alloc mac MSI %d (error: %d)\n",
+			   __func__, dev->irq, ret);
+		irq_err = REQ_IRQ_ERR_MAC;
+		goto irq_error;
+	}
+
+	/* Request the Wake IRQ in case of another line
+	 * is used for WoL
+	 */
+	if (priv->wol_irq > 0 && priv->wol_irq != dev->irq) {
+		int_name = priv->int_name_wol;
+		sprintf(int_name, "%s:%s", dev->name, "wol");
+		ret = request_irq(priv->wol_irq,
+				  stmmac_mac_interrupt,
+				  0, int_name, dev);
+		if (unlikely(ret < 0)) {
+			netdev_err(priv->dev,
+				   "%s: alloc wol MSI %d (error: %d)\n",
+				   __func__, priv->wol_irq, ret);
+			irq_err = REQ_IRQ_ERR_WOL;
+			goto irq_error;
+		}
+	}
+
+	/* Request the LPI IRQ in case of another line
+	 * is used for LPI
+	 */
+	if (priv->lpi_irq > 0 && priv->lpi_irq != dev->irq) {
+		int_name = priv->int_name_lpi;
+		sprintf(int_name, "%s:%s", dev->name, "lpi");
+		ret = request_irq(priv->lpi_irq,
+				  stmmac_mac_interrupt,
+				  0, int_name, dev);
+		if (unlikely(ret < 0)) {
+			netdev_err(priv->dev,
+				   "%s: alloc lpi MSI %d (error: %d)\n",
+				   __func__, priv->lpi_irq, ret);
+			irq_err = REQ_IRQ_ERR_LPI;
+			goto irq_error;
+		}
+	}
+
+	/* Request the Safety Feature Correctible Error line in
+	 * case of another line is used
+	 */
+	if (priv->sfty_ce_irq > 0 && priv->sfty_ce_irq != dev->irq) {
+		int_name = priv->int_name_sfty_ce;
+		sprintf(int_name, "%s:%s", dev->name, "safety-ce");
+		ret = request_irq(priv->sfty_ce_irq,
+				  stmmac_safety_interrupt,
+				  0, int_name, dev);
+		if (unlikely(ret < 0)) {
+			netdev_err(priv->dev,
+				   "%s: alloc sfty ce MSI %d (error: %d)\n",
+				   __func__, priv->sfty_ce_irq, ret);
+			irq_err = REQ_IRQ_ERR_SFTY_CE;
+			goto irq_error;
+		}
+	}
+
+	/* Request the Safety Feature Uncorrectible Error line in
+	 * case of another line is used
+	 */
+	if (priv->sfty_ue_irq > 0 && priv->sfty_ue_irq != dev->irq) {
+		int_name = priv->int_name_sfty_ue;
+		sprintf(int_name, "%s:%s", dev->name, "safety-ue");
+		ret = request_irq(priv->sfty_ue_irq,
+				  stmmac_safety_interrupt,
+				  0, int_name, dev);
+		if (unlikely(ret < 0)) {
+			netdev_err(priv->dev,
+				   "%s: alloc sfty ue MSI %d (error: %d)\n",
+				   __func__, priv->sfty_ue_irq, ret);
+			irq_err = REQ_IRQ_ERR_SFTY_UE;
+			goto irq_error;
+		}
+	}
+
+	/* Request Rx MSI irq */
+	for (i = 0; i < priv->plat->rx_queues_to_use; i++) {
+		if (i >= MTL_MAX_RX_QUEUES)
+			break;
+		if (priv->rx_irq[i] == 0)
+			continue;
+
+		int_name = priv->int_name_rx_irq[i];
+		sprintf(int_name, "%s:%s-%d", dev->name, "rx", i);
+		ret = request_irq(priv->rx_irq[i],
+				  stmmac_msi_intr_rx,
+				  0, int_name, &priv->rx_queue[i]);
+		if (unlikely(ret < 0)) {
+			netdev_err(priv->dev,
+				   "%s: alloc rx-%d  MSI %d (error: %d)\n",
+				   __func__, i, priv->rx_irq[i], ret);
+			irq_err = REQ_IRQ_ERR_RX;
+			irq_idx = i;
+			goto irq_error;
+		}
+		cpumask_clear(&cpu_mask);
+		cpumask_set_cpu(i % num_online_cpus(), &cpu_mask);
+		irq_set_affinity_hint(priv->rx_irq[i], &cpu_mask);
+	}
+
+	/* Request Tx MSI irq */
+	for (i = 0; i < priv->plat->tx_queues_to_use; i++) {
+		if (i >= MTL_MAX_TX_QUEUES)
+			break;
+		if (priv->tx_irq[i] == 0)
+			continue;
+
+		int_name = priv->int_name_tx_irq[i];
+		sprintf(int_name, "%s:%s-%d", dev->name, "tx", i);
+		ret = request_irq(priv->tx_irq[i],
+				  stmmac_msi_intr_tx,
+				  0, int_name, &priv->tx_queue[i]);
+		if (unlikely(ret < 0)) {
+			netdev_err(priv->dev,
+				   "%s: alloc tx-%d  MSI %d (error: %d)\n",
+				   __func__, i, priv->tx_irq[i], ret);
+			irq_err = REQ_IRQ_ERR_TX;
+			irq_idx = i;
+			goto irq_error;
+		}
+		cpumask_clear(&cpu_mask);
+		cpumask_set_cpu(i % num_online_cpus(), &cpu_mask);
+		irq_set_affinity_hint(priv->tx_irq[i], &cpu_mask);
+	}
+
+	return 0;
+
+irq_error:
+	stmmac_free_irq(dev, irq_err, irq_idx);
+	return ret;
+}
+
+static int stmmac_request_irq_single(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	enum request_irq_err irq_err;
+	int ret;
+
+	ret = request_irq(dev->irq, stmmac_interrupt,
+			  IRQF_SHARED, dev->name, dev);
+	if (unlikely(ret < 0)) {
+		netdev_err(priv->dev,
+			   "%s: ERROR: allocating the IRQ %d (error: %d)\n",
+			   __func__, dev->irq, ret);
+		irq_err = REQ_IRQ_ERR_MAC;
+		goto irq_error;
+	}
+
+	/* Request the Wake IRQ in case of another line
+	 * is used for WoL
+	 */
+	if (priv->wol_irq > 0 && priv->wol_irq != dev->irq) {
+		ret = request_irq(priv->wol_irq, stmmac_interrupt,
+				  IRQF_SHARED, dev->name, dev);
+		if (unlikely(ret < 0)) {
+			netdev_err(priv->dev,
+				   "%s: ERROR: allocating the WoL IRQ %d (%d)\n",
+				   __func__, priv->wol_irq, ret);
+			irq_err = REQ_IRQ_ERR_WOL;
+			goto irq_error;
+		}
+	}
+
+	/* Request the IRQ lines */
+	if (priv->lpi_irq > 0 && priv->lpi_irq != dev->irq) {
+		ret = request_irq(priv->lpi_irq, stmmac_interrupt,
+				  IRQF_SHARED, dev->name, dev);
+		if (unlikely(ret < 0)) {
+			netdev_err(priv->dev,
+				   "%s: ERROR: allocating the LPI IRQ %d (%d)\n",
+				   __func__, priv->lpi_irq, ret);
+			irq_err = REQ_IRQ_ERR_LPI;
+			goto irq_error;
+		}
+	}
+
+	return 0;
+
+irq_error:
+	stmmac_free_irq(dev, irq_err, 0);
+	return ret;
+}
+
+static int stmmac_request_irq(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	int ret;
+
+	/* Request the IRQ lines */
+	if (priv->plat->multi_msi_en)
+		ret = stmmac_request_irq_multi_msi(dev);
+	else
+		ret = stmmac_request_irq_single(dev);
+
+	return ret;
+}
+
+/**
+ *  stmmac_open - open entry point of the driver
+ *  @dev : pointer to the device structure.
+ *  Description:
+ *  This function is the open entry point of the driver.
+ *  Return value:
+ *  0 on success and an appropriate (-)ve integer as defined in errno.h
+ *  file on failure.
+ */
+static int stmmac_open(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	int mode = priv->plat->phy_interface;
+	int bfsize = 0;
+	u32 chan;
+	int ret;
+
+	ret = pm_runtime_get_sync(priv->device);
+	if (ret < 0) {
+		pm_runtime_put_noidle(priv->device);
+		return ret;
+	}
+
+	if (priv->hw->pcs != STMMAC_PCS_TBI &&
+	    priv->hw->pcs != STMMAC_PCS_RTBI &&
+	    (!priv->hw->xpcs ||
+	     xpcs_get_an_mode(priv->hw->xpcs, mode) != DW_AN_C73)) {
+		ret = stmmac_init_phy(dev);
+		if (ret) {
+			netdev_err(priv->dev,
+				   "%s: Cannot attach to PHY (error: %d)\n",
+				   __func__, ret);
+			goto init_phy_error;
+		}
+	}
+
+	/* Extra statistics */
+	memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats));
+	priv->xstats.threshold = tc;
+
+	bfsize = stmmac_set_16kib_bfsize(priv, dev->mtu);
+	if (bfsize < 0)
+		bfsize = 0;
+
+	if (bfsize < BUF_SIZE_16KiB)
+		bfsize = stmmac_set_bfsize(dev->mtu, priv->dma_buf_sz);
+
+	priv->dma_buf_sz = bfsize;
+	buf_sz = bfsize;
+
+	priv->rx_copybreak = STMMAC_RX_COPYBREAK;
+
+	if (!priv->dma_tx_size)
+		priv->dma_tx_size = DMA_DEFAULT_TX_SIZE;
+	if (!priv->dma_rx_size)
+		priv->dma_rx_size = DMA_DEFAULT_RX_SIZE;
+
+	/* Earlier check for TBS */
+	for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++) {
+		struct stmmac_tx_queue *tx_q = &priv->tx_queue[chan];
+		int tbs_en = priv->plat->tx_queues_cfg[chan].tbs_en;
+
+		/* Setup per-TXQ tbs flag before TX descriptor alloc */
+		tx_q->tbs |= tbs_en ? STMMAC_TBS_AVAIL : 0;
+	}
+
+	ret = alloc_dma_desc_resources(priv);
+	if (ret < 0) {
+		netdev_err(priv->dev, "%s: DMA descriptors allocation failed\n",
+			   __func__);
+		goto dma_desc_error;
+	}
+
+	ret = init_dma_desc_rings(dev, GFP_KERNEL);
+	if (ret < 0) {
+		netdev_err(priv->dev, "%s: DMA descriptors initialization failed\n",
+			   __func__);
+		goto init_error;
+	}
+
+	ret = stmmac_hw_setup(dev, true);
+	if (ret < 0) {
+		netdev_err(priv->dev, "%s: Hw setup failed\n", __func__);
+		goto init_error;
+	}
+
+	stmmac_init_coalesce(priv);
+
+	phylink_start(priv->phylink);
+	/* We may have called phylink_speed_down before */
+	phylink_speed_up(priv->phylink);
+
+	ret = stmmac_request_irq(dev);
+	if (ret)
+		goto irq_error;
+
+	stmmac_enable_all_queues(priv);
+	netif_tx_start_all_queues(priv->dev);
+
+	return 0;
+
+irq_error:
+	phylink_stop(priv->phylink);
+
+	for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++)
+		hrtimer_cancel(&priv->tx_queue[chan].txtimer);
+
+	stmmac_hw_teardown(dev);
+init_error:
+	free_dma_desc_resources(priv);
+dma_desc_error:
+	phylink_disconnect_phy(priv->phylink);
+init_phy_error:
+	pm_runtime_put(priv->device);
+	return ret;
+}
+
+static void stmmac_fpe_stop_wq(struct stmmac_priv *priv)
+{
+	set_bit(__FPE_REMOVING, &priv->fpe_task_state);
+
+	if (priv->fpe_wq)
+		destroy_workqueue(priv->fpe_wq);
+
+	netdev_info(priv->dev, "FPE workqueue stop");
+}
+
+/**
+ *  stmmac_release - close entry point of the driver
+ *  @dev : device pointer.
+ *  Description:
+ *  This is the stop entry point of the driver.
+ */
+static int stmmac_release(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	u32 chan;
+
+	netif_tx_disable(dev);
+
+	if (device_may_wakeup(priv->device))
+		phylink_speed_down(priv->phylink, false);
+	/* Stop and disconnect the PHY */
+	phylink_stop(priv->phylink);
+	phylink_disconnect_phy(priv->phylink);
+
+	stmmac_disable_all_queues(priv);
+
+	for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++)
+		hrtimer_cancel(&priv->tx_queue[chan].txtimer);
+
+	/* Free the IRQ lines */
+	stmmac_free_irq(dev, REQ_IRQ_ERR_ALL, 0);
+
+	if (priv->eee_enabled) {
+		priv->tx_path_in_lpi_mode = false;
+		del_timer_sync(&priv->eee_ctrl_timer);
+	}
+
+	/* Stop TX/RX DMA and clear the descriptors */
+	stmmac_stop_all_dma(priv);
+
+	/* Release and free the Rx/Tx resources */
+	free_dma_desc_resources(priv);
+
+	/* Disable the MAC Rx/Tx */
+	stmmac_mac_set(priv, priv->ioaddr, false);
+
+	netif_carrier_off(dev);
+
+	stmmac_release_ptp(priv);
+
+	pm_runtime_put(priv->device);
+
+	if (priv->dma_cap.fpesel)
+		stmmac_fpe_stop_wq(priv);
+
+	return 0;
+}
+
+static bool stmmac_vlan_insert(struct stmmac_priv *priv, struct sk_buff *skb,
+			       struct stmmac_tx_queue *tx_q)
+{
+	u16 tag = 0x0, inner_tag = 0x0;
+	u32 inner_type = 0x0;
+	struct dma_desc *p;
+
+	if (!priv->dma_cap.vlins)
+		return false;
+	if (!skb_vlan_tag_present(skb))
+		return false;
+	if (skb->vlan_proto == htons(ETH_P_8021AD)) {
+		inner_tag = skb_vlan_tag_get(skb);
+		inner_type = STMMAC_VLAN_INSERT;
+	}
+
+	tag = skb_vlan_tag_get(skb);
+
+	if (tx_q->tbs & STMMAC_TBS_AVAIL)
+		p = &tx_q->dma_entx[tx_q->cur_tx].basic;
+	else
+		p = &tx_q->dma_tx[tx_q->cur_tx];
+
+	if (stmmac_set_desc_vlan_tag(priv, p, tag, inner_tag, inner_type))
+		return false;
+
+	stmmac_set_tx_owner(priv, p);
+	tx_q->cur_tx = STMMAC_GET_ENTRY(tx_q->cur_tx, priv->dma_tx_size);
+	return true;
+}
+
+/**
+ *  stmmac_tso_allocator - close entry point of the driver
+ *  @priv: driver private structure
+ *  @des: buffer start address
+ *  @total_len: total length to fill in descriptors
+ *  @last_segment: condition for the last descriptor
+ *  @queue: TX queue index
+ *  Description:
+ *  This function fills descriptor and request new descriptors according to
+ *  buffer length to fill
+ */
+static void stmmac_tso_allocator(struct stmmac_priv *priv, dma_addr_t des,
+				 int total_len, bool last_segment, u32 queue)
+{
+	struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
+	struct dma_desc *desc;
+	u32 buff_size;
+	int tmp_len;
+
+	tmp_len = total_len;
+
+	while (tmp_len > 0) {
+		dma_addr_t curr_addr;
+
+		tx_q->cur_tx = STMMAC_GET_ENTRY(tx_q->cur_tx,
+						priv->dma_tx_size);
+		WARN_ON(tx_q->tx_skbuff[tx_q->cur_tx]);
+
+		if (tx_q->tbs & STMMAC_TBS_AVAIL)
+			desc = &tx_q->dma_entx[tx_q->cur_tx].basic;
+		else
+			desc = &tx_q->dma_tx[tx_q->cur_tx];
+
+		curr_addr = des + (total_len - tmp_len);
+		if (priv->dma_cap.addr64 <= 32)
+			desc->des0 = cpu_to_le32(curr_addr);
+		else
+			stmmac_set_desc_addr(priv, desc, curr_addr);
+
+		buff_size = tmp_len >= TSO_MAX_BUFF_SIZE ?
+			    TSO_MAX_BUFF_SIZE : tmp_len;
+
+		stmmac_prepare_tso_tx_desc(priv, desc, 0, buff_size,
+				0, 1,
+				(last_segment) && (tmp_len <= TSO_MAX_BUFF_SIZE),
+				0, 0);
+
+		tmp_len -= TSO_MAX_BUFF_SIZE;
+	}
+}
+
+static void stmmac_flush_tx_descriptors(struct stmmac_priv *priv, int queue)
+{
+	struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
+	int desc_size;
+
+	if (likely(priv->extend_desc))
+		desc_size = sizeof(struct dma_extended_desc);
+	else if (tx_q->tbs & STMMAC_TBS_AVAIL)
+		desc_size = sizeof(struct dma_edesc);
+	else
+		desc_size = sizeof(struct dma_desc);
+
+	/* The own bit must be the latest setting done when prepare the
+	 * descriptor and then barrier is needed to make sure that
+	 * all is coherent before granting the DMA engine.
+	 */
+	wmb();
+
+	tx_q->tx_tail_addr = tx_q->dma_tx_phy + (tx_q->cur_tx * desc_size);
+	stmmac_set_tx_tail_ptr(priv, priv->ioaddr, tx_q->tx_tail_addr, queue);
+}
+
+/**
+ *  stmmac_tso_xmit - Tx entry point of the driver for oversized frames (TSO)
+ *  @skb : the socket buffer
+ *  @dev : device pointer
+ *  Description: this is the transmit function that is called on TSO frames
+ *  (support available on GMAC4 and newer chips).
+ *  Diagram below show the ring programming in case of TSO frames:
+ *
+ *  First Descriptor
+ *   --------
+ *   | DES0 |---> buffer1 = L2/L3/L4 header
+ *   | DES1 |---> TCP Payload (can continue on next descr...)
+ *   | DES2 |---> buffer 1 and 2 len
+ *   | DES3 |---> must set TSE, TCP hdr len-> [22:19]. TCP payload len [17:0]
+ *   --------
+ *	|
+ *     ...
+ *	|
+ *   --------
+ *   | DES0 | --| Split TCP Payload on Buffers 1 and 2
+ *   | DES1 | --|
+ *   | DES2 | --> buffer 1 and 2 len
+ *   | DES3 |
+ *   --------
+ *
+ * mss is fixed when enable tso, so w/o programming the TDES3 ctx field.
+ */
+static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct dma_desc *desc, *first, *mss_desc = NULL;
+	struct stmmac_priv *priv = netdev_priv(dev);
+	int nfrags = skb_shinfo(skb)->nr_frags;
+	u32 queue = skb_get_queue_mapping(skb);
+	unsigned int first_entry, tx_packets;
+	int tmp_pay_len = 0, first_tx;
+	struct stmmac_tx_queue *tx_q;
+	bool has_vlan, set_ic;
+	u8 proto_hdr_len, hdr;
+	u32 pay_len, mss;
+	dma_addr_t des;
+	int i;
+
+	tx_q = &priv->tx_queue[queue];
+	first_tx = tx_q->cur_tx;
+
+	/* Compute header lengths */
+	if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_L4) {
+		proto_hdr_len = skb_transport_offset(skb) + sizeof(struct udphdr);
+		hdr = sizeof(struct udphdr);
+	} else {
+		proto_hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+		hdr = tcp_hdrlen(skb);
+	}
+
+	/* Desc availability based on threshold should be enough safe */
+	if (unlikely(stmmac_tx_avail(priv, queue) <
+		(((skb->len - proto_hdr_len) / TSO_MAX_BUFF_SIZE + 1)))) {
+		if (!netif_tx_queue_stopped(netdev_get_tx_queue(dev, queue))) {
+			netif_tx_stop_queue(netdev_get_tx_queue(priv->dev,
+								queue));
+			/* This is a hard error, log it. */
+			netdev_err(priv->dev,
+				   "%s: Tx Ring full when queue awake\n",
+				   __func__);
+		}
+		return NETDEV_TX_BUSY;
+	}
+
+	pay_len = skb_headlen(skb) - proto_hdr_len; /* no frags */
+
+	mss = skb_shinfo(skb)->gso_size;
+
+	/* set new MSS value if needed */
+	if (mss != tx_q->mss) {
+		if (tx_q->tbs & STMMAC_TBS_AVAIL)
+			mss_desc = &tx_q->dma_entx[tx_q->cur_tx].basic;
+		else
+			mss_desc = &tx_q->dma_tx[tx_q->cur_tx];
+
+		stmmac_set_mss(priv, mss_desc, mss);
+		tx_q->mss = mss;
+		tx_q->cur_tx = STMMAC_GET_ENTRY(tx_q->cur_tx,
+						priv->dma_tx_size);
+		WARN_ON(tx_q->tx_skbuff[tx_q->cur_tx]);
+	}
+
+	if (netif_msg_tx_queued(priv)) {
+		pr_info("%s: hdrlen %d, hdr_len %d, pay_len %d, mss %d\n",
+			__func__, hdr, proto_hdr_len, pay_len, mss);
+		pr_info("\tskb->len %d, skb->data_len %d\n", skb->len,
+			skb->data_len);
+	}
+
+	/* Check if VLAN can be inserted by HW */
+	has_vlan = stmmac_vlan_insert(priv, skb, tx_q);
+
+	first_entry = tx_q->cur_tx;
+	WARN_ON(tx_q->tx_skbuff[first_entry]);
+
+	if (tx_q->tbs & STMMAC_TBS_AVAIL)
+		desc = &tx_q->dma_entx[first_entry].basic;
+	else
+		desc = &tx_q->dma_tx[first_entry];
+	first = desc;
+
+	if (has_vlan)
+		stmmac_set_desc_vlan(priv, first, STMMAC_VLAN_INSERT);
+
+	/* first descriptor: fill Headers on Buf1 */
+	des = dma_map_single(priv->device, skb->data, skb_headlen(skb),
+			     DMA_TO_DEVICE);
+	if (dma_mapping_error(priv->device, des))
+		goto dma_map_err;
+
+	tx_q->tx_skbuff_dma[first_entry].buf = des;
+	tx_q->tx_skbuff_dma[first_entry].len = skb_headlen(skb);
+	tx_q->tx_skbuff_dma[first_entry].map_as_page = false;
+	tx_q->tx_skbuff_dma[first_entry].buf_type = STMMAC_TXBUF_T_SKB;
+
+	if (priv->dma_cap.addr64 <= 32) {
+		first->des0 = cpu_to_le32(des);
+
+		/* Fill start of payload in buff2 of first descriptor */
+		if (pay_len)
+			first->des1 = cpu_to_le32(des + proto_hdr_len);
+
+		/* If needed take extra descriptors to fill the remaining payload */
+		tmp_pay_len = pay_len - TSO_MAX_BUFF_SIZE;
+	} else {
+		stmmac_set_desc_addr(priv, first, des);
+		tmp_pay_len = pay_len;
+		des += proto_hdr_len;
+		pay_len = 0;
+	}
+
+	stmmac_tso_allocator(priv, des, tmp_pay_len, (nfrags == 0), queue);
+
+	/* Prepare fragments */
+	for (i = 0; i < nfrags; i++) {
+		const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+		des = skb_frag_dma_map(priv->device, frag, 0,
+				       skb_frag_size(frag),
+				       DMA_TO_DEVICE);
+		if (dma_mapping_error(priv->device, des))
+			goto dma_map_err;
+
+		stmmac_tso_allocator(priv, des, skb_frag_size(frag),
+				     (i == nfrags - 1), queue);
+
+		tx_q->tx_skbuff_dma[tx_q->cur_tx].buf = des;
+		tx_q->tx_skbuff_dma[tx_q->cur_tx].len = skb_frag_size(frag);
+		tx_q->tx_skbuff_dma[tx_q->cur_tx].map_as_page = true;
+		tx_q->tx_skbuff_dma[tx_q->cur_tx].buf_type = STMMAC_TXBUF_T_SKB;
+	}
+
+	tx_q->tx_skbuff_dma[tx_q->cur_tx].last_segment = true;
+
+	/* Only the last descriptor gets to point to the skb. */
+	tx_q->tx_skbuff[tx_q->cur_tx] = skb;
+	tx_q->tx_skbuff_dma[tx_q->cur_tx].buf_type = STMMAC_TXBUF_T_SKB;
+
+	/* Manage tx mitigation */
+	tx_packets = (tx_q->cur_tx + 1) - first_tx;
+	tx_q->tx_count_frames += tx_packets;
+
+	if ((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && priv->hwts_tx_en)
+		set_ic = true;
+	else if (!priv->tx_coal_frames[queue])
+		set_ic = false;
+	else if (tx_packets > priv->tx_coal_frames[queue])
+		set_ic = true;
+	else if ((tx_q->tx_count_frames %
+		  priv->tx_coal_frames[queue]) < tx_packets)
+		set_ic = true;
+	else
+		set_ic = false;
+
+	if (set_ic) {
+		if (tx_q->tbs & STMMAC_TBS_AVAIL)
+			desc = &tx_q->dma_entx[tx_q->cur_tx].basic;
+		else
+			desc = &tx_q->dma_tx[tx_q->cur_tx];
+
+		tx_q->tx_count_frames = 0;
+		stmmac_set_tx_ic(priv, desc);
+		priv->xstats.tx_set_ic_bit++;
+	}
+
+	/* We've used all descriptors we need for this skb, however,
+	 * advance cur_tx so that it references a fresh descriptor.
+	 * ndo_start_xmit will fill this descriptor the next time it's
+	 * called and stmmac_tx_clean may clean up to this descriptor.
+	 */
+	tx_q->cur_tx = STMMAC_GET_ENTRY(tx_q->cur_tx, priv->dma_tx_size);
+
+	if (unlikely(stmmac_tx_avail(priv, queue) <= (MAX_SKB_FRAGS + 1))) {
+		netif_dbg(priv, hw, priv->dev, "%s: stop transmitted packets\n",
+			  __func__);
+		netif_tx_stop_queue(netdev_get_tx_queue(priv->dev, queue));
+	}
+
+	dev->stats.tx_bytes += skb->len;
+	priv->xstats.tx_tso_frames++;
+	priv->xstats.tx_tso_nfrags += nfrags;
+
+	if (priv->sarc_type)
+		stmmac_set_desc_sarc(priv, first, priv->sarc_type);
+
+	skb_tx_timestamp(skb);
+
+	if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+		     priv->hwts_tx_en)) {
+		/* declare that device is doing timestamping */
+		skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+		stmmac_enable_tx_timestamp(priv, first);
+	}
+
+	/* Complete the first descriptor before granting the DMA */
+	stmmac_prepare_tso_tx_desc(priv, first, 1,
+			proto_hdr_len,
+			pay_len,
+			1, tx_q->tx_skbuff_dma[first_entry].last_segment,
+			hdr / 4, (skb->len - proto_hdr_len));
+
+	/* If context desc is used to change MSS */
+	if (mss_desc) {
+		/* Make sure that first descriptor has been completely
+		 * written, including its own bit. This is because MSS is
+		 * actually before first descriptor, so we need to make
+		 * sure that MSS's own bit is the last thing written.
+		 */
+		dma_wmb();
+		stmmac_set_tx_owner(priv, mss_desc);
+	}
+
+	if (netif_msg_pktdata(priv)) {
+		pr_info("%s: curr=%d dirty=%d f=%d, e=%d, f_p=%p, nfrags %d\n",
+			__func__, tx_q->cur_tx, tx_q->dirty_tx, first_entry,
+			tx_q->cur_tx, first, nfrags);
+		pr_info(">>> frame to be transmitted: ");
+		print_pkt(skb->data, skb_headlen(skb));
+	}
+
+	netdev_tx_sent_queue(netdev_get_tx_queue(dev, queue), skb->len);
+
+	stmmac_flush_tx_descriptors(priv, queue);
+	stmmac_tx_timer_arm(priv, queue);
+
+	return NETDEV_TX_OK;
+
+dma_map_err:
+	dev_err(priv->device, "Tx dma map failed\n");
+	dev_kfree_skb(skb);
+	priv->dev->stats.tx_dropped++;
+	return NETDEV_TX_OK;
+}
+
+/**
+ *  stmmac_xmit - Tx entry point of the driver
+ *  @skb : the socket buffer
+ *  @dev : device pointer
+ *  Description : this is the tx entry point of the driver.
+ *  It programs the chain or the ring and supports oversized frames
+ *  and SG feature.
+ */
+static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	unsigned int first_entry, tx_packets, enh_desc;
+	struct stmmac_priv *priv = netdev_priv(dev);
+	unsigned int nopaged_len = skb_headlen(skb);
+	int i, csum_insertion = 0, is_jumbo = 0;
+	u32 queue = skb_get_queue_mapping(skb);
+	int nfrags = skb_shinfo(skb)->nr_frags;
+	int gso = skb_shinfo(skb)->gso_type;
+	struct dma_edesc *tbs_desc = NULL;
+	struct dma_desc *desc, *first;
+	struct stmmac_tx_queue *tx_q;
+	bool has_vlan, set_ic;
+	int entry, first_tx;
+	dma_addr_t des;
+
+	tx_q = &priv->tx_queue[queue];
+	first_tx = tx_q->cur_tx;
+
+	if (priv->tx_path_in_lpi_mode && priv->eee_sw_timer_en)
+		stmmac_disable_eee_mode(priv);
+
+	/* Manage oversized TCP frames for GMAC4 device */
+	if (skb_is_gso(skb) && priv->tso) {
+		if (gso & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6))
+			return stmmac_tso_xmit(skb, dev);
+		if (priv->plat->has_gmac4 && (gso & SKB_GSO_UDP_L4))
+			return stmmac_tso_xmit(skb, dev);
+	}
+
+	if (unlikely(stmmac_tx_avail(priv, queue) < nfrags + 1)) {
+		if (!netif_tx_queue_stopped(netdev_get_tx_queue(dev, queue))) {
+			netif_tx_stop_queue(netdev_get_tx_queue(priv->dev,
+								queue));
+			/* This is a hard error, log it. */
+			netdev_err(priv->dev,
+				   "%s: Tx Ring full when queue awake\n",
+				   __func__);
+		}
+		return NETDEV_TX_BUSY;
+	}
+
+	/* Check if VLAN can be inserted by HW */
+	has_vlan = stmmac_vlan_insert(priv, skb, tx_q);
+
+	entry = tx_q->cur_tx;
+	first_entry = entry;
+	WARN_ON(tx_q->tx_skbuff[first_entry]);
+
+	csum_insertion = (skb->ip_summed == CHECKSUM_PARTIAL);
+
+	if (likely(priv->extend_desc))
+		desc = (struct dma_desc *)(tx_q->dma_etx + entry);
+	else if (tx_q->tbs & STMMAC_TBS_AVAIL)
+		desc = &tx_q->dma_entx[entry].basic;
+	else
+		desc = tx_q->dma_tx + entry;
+
+	first = desc;
+
+	if (has_vlan)
+		stmmac_set_desc_vlan(priv, first, STMMAC_VLAN_INSERT);
+
+	enh_desc = priv->plat->enh_desc;
+	/* To program the descriptors according to the size of the frame */
+	if (enh_desc)
+		is_jumbo = stmmac_is_jumbo_frm(priv, skb->len, enh_desc);
+
+	if (unlikely(is_jumbo)) {
+		entry = stmmac_jumbo_frm(priv, tx_q, skb, csum_insertion);
+		if (unlikely(entry < 0) && (entry != -EINVAL))
+			goto dma_map_err;
+	}
+
+	for (i = 0; i < nfrags; i++) {
+		const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+		int len = skb_frag_size(frag);
+		bool last_segment = (i == (nfrags - 1));
+
+		entry = STMMAC_GET_ENTRY(entry, priv->dma_tx_size);
+		WARN_ON(tx_q->tx_skbuff[entry]);
+
+		if (likely(priv->extend_desc))
+			desc = (struct dma_desc *)(tx_q->dma_etx + entry);
+		else if (tx_q->tbs & STMMAC_TBS_AVAIL)
+			desc = &tx_q->dma_entx[entry].basic;
+		else
+			desc = tx_q->dma_tx + entry;
+
+		des = skb_frag_dma_map(priv->device, frag, 0, len,
+				       DMA_TO_DEVICE);
+		if (dma_mapping_error(priv->device, des))
+			goto dma_map_err; /* should reuse desc w/o issues */
+
+		tx_q->tx_skbuff_dma[entry].buf = des;
+
+		stmmac_set_desc_addr(priv, desc, des);
+
+		tx_q->tx_skbuff_dma[entry].map_as_page = true;
+		tx_q->tx_skbuff_dma[entry].len = len;
+		tx_q->tx_skbuff_dma[entry].last_segment = last_segment;
+		tx_q->tx_skbuff_dma[entry].buf_type = STMMAC_TXBUF_T_SKB;
+
+		/* Prepare the descriptor and set the own bit too */
+		stmmac_prepare_tx_desc(priv, desc, 0, len, csum_insertion,
+				priv->mode, 1, last_segment, skb->len);
+	}
+
+	/* Only the last descriptor gets to point to the skb. */
+	tx_q->tx_skbuff[entry] = skb;
+	tx_q->tx_skbuff_dma[entry].buf_type = STMMAC_TXBUF_T_SKB;
+
+	/* According to the coalesce parameter the IC bit for the latest
+	 * segment is reset and the timer re-started to clean the tx status.
+	 * This approach takes care about the fragments: desc is the first
+	 * element in case of no SG.
+	 */
+	tx_packets = (entry + 1) - first_tx;
+	tx_q->tx_count_frames += tx_packets;
+
+	if ((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && priv->hwts_tx_en)
+		set_ic = true;
+	else if (!priv->tx_coal_frames[queue])
+		set_ic = false;
+	else if (tx_packets > priv->tx_coal_frames[queue])
+		set_ic = true;
+	else if ((tx_q->tx_count_frames %
+		  priv->tx_coal_frames[queue]) < tx_packets)
+		set_ic = true;
+	else
+		set_ic = false;
+
+	if (set_ic) {
+		if (likely(priv->extend_desc))
+			desc = &tx_q->dma_etx[entry].basic;
+		else if (tx_q->tbs & STMMAC_TBS_AVAIL)
+			desc = &tx_q->dma_entx[entry].basic;
+		else
+			desc = &tx_q->dma_tx[entry];
+
+		tx_q->tx_count_frames = 0;
+		stmmac_set_tx_ic(priv, desc);
+		priv->xstats.tx_set_ic_bit++;
+	}
+
+	/* We've used all descriptors we need for this skb, however,
+	 * advance cur_tx so that it references a fresh descriptor.
+	 * ndo_start_xmit will fill this descriptor the next time it's
+	 * called and stmmac_tx_clean may clean up to this descriptor.
+	 */
+	entry = STMMAC_GET_ENTRY(entry, priv->dma_tx_size);
+	tx_q->cur_tx = entry;
+
+	if (netif_msg_pktdata(priv)) {
+		netdev_dbg(priv->dev,
+			   "%s: curr=%d dirty=%d f=%d, e=%d, first=%p, nfrags=%d",
+			   __func__, tx_q->cur_tx, tx_q->dirty_tx, first_entry,
+			   entry, first, nfrags);
+
+		netdev_dbg(priv->dev, ">>> frame to be transmitted: ");
+		print_pkt(skb->data, skb->len);
+	}
+
+	if (unlikely(stmmac_tx_avail(priv, queue) <= (MAX_SKB_FRAGS + 1))) {
+		netif_dbg(priv, hw, priv->dev, "%s: stop transmitted packets\n",
+			  __func__);
+		netif_tx_stop_queue(netdev_get_tx_queue(priv->dev, queue));
+	}
+
+	dev->stats.tx_bytes += skb->len;
+
+	if (priv->sarc_type)
+		stmmac_set_desc_sarc(priv, first, priv->sarc_type);
+
+	skb_tx_timestamp(skb);
+
+	/* Ready to fill the first descriptor and set the OWN bit w/o any
+	 * problems because all the descriptors are actually ready to be
+	 * passed to the DMA engine.
+	 */
+	if (likely(!is_jumbo)) {
+		bool last_segment = (nfrags == 0);
+
+		des = dma_map_single(priv->device, skb->data,
+				     nopaged_len, DMA_TO_DEVICE);
+		if (dma_mapping_error(priv->device, des))
+			goto dma_map_err;
+
+		tx_q->tx_skbuff_dma[first_entry].buf = des;
+		tx_q->tx_skbuff_dma[first_entry].buf_type = STMMAC_TXBUF_T_SKB;
+		tx_q->tx_skbuff_dma[first_entry].map_as_page = false;
+
+		stmmac_set_desc_addr(priv, first, des);
+
+		tx_q->tx_skbuff_dma[first_entry].len = nopaged_len;
+		tx_q->tx_skbuff_dma[first_entry].last_segment = last_segment;
+
+		if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+			     priv->hwts_tx_en)) {
+			/* declare that device is doing timestamping */
+			skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+			stmmac_enable_tx_timestamp(priv, first);
+		}
+
+		/* Prepare the first descriptor setting the OWN bit too */
+		stmmac_prepare_tx_desc(priv, first, 1, nopaged_len,
+				csum_insertion, priv->mode, 0, last_segment,
+				skb->len);
+	}
+
+	if (tx_q->tbs & STMMAC_TBS_EN) {
+		struct timespec64 ts = ns_to_timespec64(skb->tstamp);
+
+		tbs_desc = &tx_q->dma_entx[first_entry];
+		stmmac_set_desc_tbs(priv, tbs_desc, ts.tv_sec, ts.tv_nsec);
+	}
+
+	stmmac_set_tx_owner(priv, first);
+
+	netdev_tx_sent_queue(netdev_get_tx_queue(dev, queue), skb->len);
+
+	stmmac_enable_dma_transmission(priv, priv->ioaddr);
+
+	stmmac_flush_tx_descriptors(priv, queue);
+	stmmac_tx_timer_arm(priv, queue);
+
+	return NETDEV_TX_OK;
+
+dma_map_err:
+	netdev_err(priv->dev, "Tx DMA map failed\n");
+	dev_kfree_skb(skb);
+	priv->dev->stats.tx_dropped++;
+	return NETDEV_TX_OK;
+}
+
+static void stmmac_rx_vlan(struct net_device *dev, struct sk_buff *skb)
+{
+	struct vlan_ethhdr *veth;
+	__be16 vlan_proto;
+	u16 vlanid;
+
+	veth = (struct vlan_ethhdr *)skb->data;
+	vlan_proto = veth->h_vlan_proto;
+
+	if ((vlan_proto == htons(ETH_P_8021Q) &&
+	     dev->features & NETIF_F_HW_VLAN_CTAG_RX) ||
+	    (vlan_proto == htons(ETH_P_8021AD) &&
+	     dev->features & NETIF_F_HW_VLAN_STAG_RX)) {
+		/* pop the vlan tag */
+		vlanid = ntohs(veth->h_vlan_TCI);
+		memmove(skb->data + VLAN_HLEN, veth, ETH_ALEN * 2);
+		skb_pull(skb, VLAN_HLEN);
+		__vlan_hwaccel_put_tag(skb, vlan_proto, vlanid);
+	}
+}
+
+/**
+ * stmmac_rx_refill - refill used skb preallocated buffers
+ * @priv: driver private structure
+ * @queue: RX queue index
+ * Description : this is to reallocate the skb for the reception process
+ * that is based on zero-copy.
+ */
+static inline void stmmac_rx_refill(struct stmmac_priv *priv, u32 queue)
+{
+	struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+	int dirty = stmmac_rx_dirty(priv, queue);
+	unsigned int entry = rx_q->dirty_rx;
+	gfp_t gfp = (GFP_ATOMIC | __GFP_NOWARN);
+
+	if (priv->dma_cap.addr64 <= 32)
+		gfp |= GFP_DMA32;
+
+	while (dirty-- > 0) {
+		struct stmmac_rx_buffer *buf = &rx_q->buf_pool[entry];
+		struct dma_desc *p;
+		bool use_rx_wd;
+
+		if (priv->extend_desc)
+			p = (struct dma_desc *)(rx_q->dma_erx + entry);
+		else
+			p = rx_q->dma_rx + entry;
+
+		if (!buf->page) {
+			buf->page = page_pool_alloc_pages(rx_q->page_pool, gfp);
+			if (!buf->page)
+				break;
+		}
+
+		if (priv->sph && !buf->sec_page) {
+			buf->sec_page = page_pool_alloc_pages(rx_q->page_pool, gfp);
+			if (!buf->sec_page)
+				break;
+
+			buf->sec_addr = page_pool_get_dma_addr(buf->sec_page);
+		}
+
+		buf->addr = page_pool_get_dma_addr(buf->page) + buf->page_offset;
+
+		stmmac_set_desc_addr(priv, p, buf->addr);
+		if (priv->sph)
+			stmmac_set_desc_sec_addr(priv, p, buf->sec_addr, true);
+		else
+			stmmac_set_desc_sec_addr(priv, p, buf->sec_addr, false);
+		stmmac_refill_desc3(priv, rx_q, p);
+
+		rx_q->rx_count_frames++;
+		rx_q->rx_count_frames += priv->rx_coal_frames[queue];
+		if (rx_q->rx_count_frames > priv->rx_coal_frames[queue])
+			rx_q->rx_count_frames = 0;
+
+		use_rx_wd = !priv->rx_coal_frames[queue];
+		use_rx_wd |= rx_q->rx_count_frames > 0;
+		if (!priv->use_riwt)
+			use_rx_wd = false;
+
+		dma_wmb();
+		stmmac_set_rx_owner(priv, p, use_rx_wd);
+
+		entry = STMMAC_GET_ENTRY(entry, priv->dma_rx_size);
+	}
+	rx_q->dirty_rx = entry;
+	rx_q->rx_tail_addr = rx_q->dma_rx_phy +
+			    (rx_q->dirty_rx * sizeof(struct dma_desc));
+	stmmac_set_rx_tail_ptr(priv, priv->ioaddr, rx_q->rx_tail_addr, queue);
+}
+
+static unsigned int stmmac_rx_buf1_len(struct stmmac_priv *priv,
+				       struct dma_desc *p,
+				       int status, unsigned int len)
+{
+	unsigned int plen = 0, hlen = 0;
+	int coe = priv->hw->rx_csum;
+
+	/* Not first descriptor, buffer is always zero */
+	if (priv->sph && len)
+		return 0;
+
+	/* First descriptor, get split header length */
+	stmmac_get_rx_header_len(priv, p, &hlen);
+	if (priv->sph && hlen) {
+		priv->xstats.rx_split_hdr_pkt_n++;
+		return hlen;
+	}
+
+	/* First descriptor, not last descriptor and not split header */
+	if (status & rx_not_ls)
+		return priv->dma_buf_sz;
+
+	plen = stmmac_get_rx_frame_len(priv, p, coe);
+
+	/* First descriptor and last descriptor and not split header */
+	return min_t(unsigned int, priv->dma_buf_sz, plen);
+}
+
+static unsigned int stmmac_rx_buf2_len(struct stmmac_priv *priv,
+				       struct dma_desc *p,
+				       int status, unsigned int len)
+{
+	int coe = priv->hw->rx_csum;
+	unsigned int plen = 0;
+
+	/* Not split header, buffer is not available */
+	if (!priv->sph)
+		return 0;
+
+	/* Not last descriptor */
+	if (status & rx_not_ls)
+		return priv->dma_buf_sz;
+
+	plen = stmmac_get_rx_frame_len(priv, p, coe);
+
+	/* Last descriptor */
+	return plen - len;
+}
+
+static int stmmac_xdp_xmit_xdpf(struct stmmac_priv *priv, int queue,
+				struct xdp_frame *xdpf, bool dma_map)
+{
+	struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
+	unsigned int entry = tx_q->cur_tx;
+	struct dma_desc *tx_desc;
+	dma_addr_t dma_addr;
+	bool set_ic;
+
+	if (stmmac_tx_avail(priv, queue) < STMMAC_TX_THRESH(priv))
+		return STMMAC_XDP_CONSUMED;
+
+	if (likely(priv->extend_desc))
+		tx_desc = (struct dma_desc *)(tx_q->dma_etx + entry);
+	else if (tx_q->tbs & STMMAC_TBS_AVAIL)
+		tx_desc = &tx_q->dma_entx[entry].basic;
+	else
+		tx_desc = tx_q->dma_tx + entry;
+
+	if (dma_map) {
+		dma_addr = dma_map_single(priv->device, xdpf->data,
+					  xdpf->len, DMA_TO_DEVICE);
+		if (dma_mapping_error(priv->device, dma_addr))
+			return STMMAC_XDP_CONSUMED;
+
+		tx_q->tx_skbuff_dma[entry].buf_type = STMMAC_TXBUF_T_XDP_NDO;
+	} else {
+		struct page *page = virt_to_page(xdpf->data);
+
+		dma_addr = page_pool_get_dma_addr(page) + sizeof(*xdpf) +
+			   xdpf->headroom;
+		dma_sync_single_for_device(priv->device, dma_addr,
+					   xdpf->len, DMA_BIDIRECTIONAL);
+
+		tx_q->tx_skbuff_dma[entry].buf_type = STMMAC_TXBUF_T_XDP_TX;
+	}
+
+	tx_q->tx_skbuff_dma[entry].buf = dma_addr;
+	tx_q->tx_skbuff_dma[entry].map_as_page = false;
+	tx_q->tx_skbuff_dma[entry].len = xdpf->len;
+	tx_q->tx_skbuff_dma[entry].last_segment = true;
+	tx_q->tx_skbuff_dma[entry].is_jumbo = false;
+
+	tx_q->xdpf[entry] = xdpf;
+
+	stmmac_set_desc_addr(priv, tx_desc, dma_addr);
+
+	stmmac_prepare_tx_desc(priv, tx_desc, 1, xdpf->len,
+			       true, priv->mode, true, true,
+			       xdpf->len);
+
+	tx_q->tx_count_frames++;
+
+	if (tx_q->tx_count_frames % priv->tx_coal_frames[queue] == 0)
+		set_ic = true;
+	else
+		set_ic = false;
+
+	if (set_ic) {
+		tx_q->tx_count_frames = 0;
+		stmmac_set_tx_ic(priv, tx_desc);
+		priv->xstats.tx_set_ic_bit++;
+	}
+
+	stmmac_enable_dma_transmission(priv, priv->ioaddr);
+
+	entry = STMMAC_GET_ENTRY(entry, priv->dma_tx_size);
+	tx_q->cur_tx = entry;
+
+	return STMMAC_XDP_TX;
+}
+
+static int stmmac_xdp_get_tx_queue(struct stmmac_priv *priv,
+				   int cpu)
+{
+	int index = cpu;
+
+	if (unlikely(index < 0))
+		index = 0;
+
+	while (index >= priv->plat->tx_queues_to_use)
+		index -= priv->plat->tx_queues_to_use;
+
+	return index;
+}
+
+static int stmmac_xdp_xmit_back(struct stmmac_priv *priv,
+				struct xdp_buff *xdp)
+{
+	struct xdp_frame *xdpf = xdp_convert_buff_to_frame(xdp);
+	int cpu = smp_processor_id();
+	struct netdev_queue *nq;
+	int queue;
+	int res;
+
+	if (unlikely(!xdpf))
+		return STMMAC_XDP_CONSUMED;
+
+	queue = stmmac_xdp_get_tx_queue(priv, cpu);
+	nq = netdev_get_tx_queue(priv->dev, queue);
+
+	__netif_tx_lock(nq, cpu);
+	/* Avoids TX time-out as we are sharing with slow path */
+	txq_trans_cond_update(nq);
+
+	res = stmmac_xdp_xmit_xdpf(priv, queue, xdpf, false);
+	if (res == STMMAC_XDP_TX)
+		stmmac_flush_tx_descriptors(priv, queue);
+
+	__netif_tx_unlock(nq);
+
+	return res;
+}
+
+static int __stmmac_xdp_run_prog(struct stmmac_priv *priv,
+				 struct bpf_prog *prog,
+				 struct xdp_buff *xdp)
+{
+	u32 act;
+	int res;
+
+	act = bpf_prog_run_xdp(prog, xdp);
+	switch (act) {
+	case XDP_PASS:
+		res = STMMAC_XDP_PASS;
+		break;
+	case XDP_TX:
+		res = stmmac_xdp_xmit_back(priv, xdp);
+		break;
+	case XDP_REDIRECT:
+		if (xdp_do_redirect(priv->dev, xdp, prog) < 0)
+			res = STMMAC_XDP_CONSUMED;
+		else
+			res = STMMAC_XDP_REDIRECT;
+		break;
+	default:
+		bpf_warn_invalid_xdp_action(priv->dev, prog, act);
+		fallthrough;
+	case XDP_ABORTED:
+		trace_xdp_exception(priv->dev, prog, act);
+		fallthrough;
+	case XDP_DROP:
+		res = STMMAC_XDP_CONSUMED;
+		break;
+	}
+
+	return res;
+}
+
+static struct sk_buff *stmmac_xdp_run_prog(struct stmmac_priv *priv,
+					   struct xdp_buff *xdp)
+{
+	struct bpf_prog *prog;
+	int res;
+
+	prog = READ_ONCE(priv->xdp_prog);
+	if (!prog) {
+		res = STMMAC_XDP_PASS;
+		goto out;
+	}
+
+	res = __stmmac_xdp_run_prog(priv, prog, xdp);
+out:
+	return ERR_PTR(-res);
+}
+
+static void stmmac_finalize_xdp_rx(struct stmmac_priv *priv,
+				   int xdp_status)
+{
+	int cpu = smp_processor_id();
+	int queue;
+
+	queue = stmmac_xdp_get_tx_queue(priv, cpu);
+
+	if (xdp_status & STMMAC_XDP_TX)
+		stmmac_tx_timer_arm(priv, queue);
+
+	if (xdp_status & STMMAC_XDP_REDIRECT)
+		xdp_do_flush();
+}
+
+static struct sk_buff *stmmac_construct_skb_zc(struct stmmac_channel *ch,
+					       struct xdp_buff *xdp)
+{
+	unsigned int metasize = xdp->data - xdp->data_meta;
+	unsigned int datasize = xdp->data_end - xdp->data;
+	struct sk_buff *skb;
+
+	skb = __napi_alloc_skb(&ch->rxtx_napi,
+			       xdp->data_end - xdp->data_hard_start,
+			       GFP_ATOMIC | __GFP_NOWARN);
+	if (unlikely(!skb))
+		return NULL;
+
+	skb_reserve(skb, xdp->data - xdp->data_hard_start);
+	memcpy(__skb_put(skb, datasize), xdp->data, datasize);
+	if (metasize)
+		skb_metadata_set(skb, metasize);
+
+	return skb;
+}
+
+static void stmmac_dispatch_skb_zc(struct stmmac_priv *priv, u32 queue,
+				   struct dma_desc *p, struct dma_desc *np,
+				   struct xdp_buff *xdp)
+{
+	struct stmmac_channel *ch = &priv->channel[queue];
+	unsigned int len = xdp->data_end - xdp->data;
+	enum pkt_hash_types hash_type;
+	int coe = priv->hw->rx_csum;
+	struct sk_buff *skb;
+	u32 hash;
+
+	skb = stmmac_construct_skb_zc(ch, xdp);
+	if (!skb) {
+		priv->dev->stats.rx_dropped++;
+		return;
+	}
+
+	stmmac_get_rx_hwtstamp(priv, p, np, skb);
+	stmmac_rx_vlan(priv->dev, skb);
+	skb->protocol = eth_type_trans(skb, priv->dev);
+
+	if (unlikely(!coe))
+		skb_checksum_none_assert(skb);
+	else
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+	if (!stmmac_get_rx_hash(priv, p, &hash, &hash_type))
+		skb_set_hash(skb, hash, hash_type);
+
+	skb_record_rx_queue(skb, queue);
+	napi_gro_receive(&ch->rxtx_napi, skb);
+
+	priv->dev->stats.rx_packets++;
+	priv->dev->stats.rx_bytes += len;
+}
+
+static bool stmmac_rx_refill_zc(struct stmmac_priv *priv, u32 queue, u32 budget)
+{
+	struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+	unsigned int entry = rx_q->dirty_rx;
+	struct dma_desc *rx_desc = NULL;
+	bool ret = true;
+
+	budget = min(budget, stmmac_rx_dirty(priv, queue));
+
+	while (budget-- > 0 && entry != rx_q->cur_rx) {
+		struct stmmac_rx_buffer *buf = &rx_q->buf_pool[entry];
+		dma_addr_t dma_addr;
+		bool use_rx_wd;
+
+		if (!buf->xdp) {
+			buf->xdp = xsk_buff_alloc(rx_q->xsk_pool);
+			if (!buf->xdp) {
+				ret = false;
+				break;
+			}
+		}
+
+		if (priv->extend_desc)
+			rx_desc = (struct dma_desc *)(rx_q->dma_erx + entry);
+		else
+			rx_desc = rx_q->dma_rx + entry;
+
+		dma_addr = xsk_buff_xdp_get_dma(buf->xdp);
+		stmmac_set_desc_addr(priv, rx_desc, dma_addr);
+		stmmac_set_desc_sec_addr(priv, rx_desc, 0, false);
+		stmmac_refill_desc3(priv, rx_q, rx_desc);
+
+		rx_q->rx_count_frames++;
+		rx_q->rx_count_frames += priv->rx_coal_frames[queue];
+		if (rx_q->rx_count_frames > priv->rx_coal_frames[queue])
+			rx_q->rx_count_frames = 0;
+
+		use_rx_wd = !priv->rx_coal_frames[queue];
+		use_rx_wd |= rx_q->rx_count_frames > 0;
+		if (!priv->use_riwt)
+			use_rx_wd = false;
+
+		dma_wmb();
+		stmmac_set_rx_owner(priv, rx_desc, use_rx_wd);
+
+		entry = STMMAC_GET_ENTRY(entry, priv->dma_rx_size);
+	}
+
+	if (rx_desc) {
+		rx_q->dirty_rx = entry;
+		rx_q->rx_tail_addr = rx_q->dma_rx_phy +
+				     (rx_q->dirty_rx * sizeof(struct dma_desc));
+		stmmac_set_rx_tail_ptr(priv, priv->ioaddr, rx_q->rx_tail_addr, queue);
+	}
+
+	return ret;
+}
+
+static int stmmac_rx_zc(struct stmmac_priv *priv, int limit, u32 queue)
+{
+	struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+	unsigned int count = 0, error = 0, len = 0;
+	int dirty = stmmac_rx_dirty(priv, queue);
+	unsigned int next_entry = rx_q->cur_rx;
+	unsigned int desc_size;
+	struct bpf_prog *prog;
+	bool failure = false;
+	int xdp_status = 0;
+	int status = 0;
+
+	if (netif_msg_rx_status(priv)) {
+		void *rx_head;
+
+		netdev_dbg(priv->dev, "%s: descriptor ring:\n", __func__);
+		if (priv->extend_desc) {
+			rx_head = (void *)rx_q->dma_erx;
+			desc_size = sizeof(struct dma_extended_desc);
+		} else {
+			rx_head = (void *)rx_q->dma_rx;
+			desc_size = sizeof(struct dma_desc);
+		}
+
+		stmmac_display_ring(priv, rx_head, priv->dma_rx_size, true,
+				    rx_q->dma_rx_phy, desc_size);
+	}
+	while (count < limit) {
+		struct stmmac_rx_buffer *buf;
+		unsigned int buf1_len = 0;
+		struct dma_desc *np, *p;
+		int entry;
+		int res;
+
+		if (!count && rx_q->state_saved) {
+			error = rx_q->state.error;
+			len = rx_q->state.len;
+		} else {
+			rx_q->state_saved = false;
+			error = 0;
+			len = 0;
+		}
+
+		if (count >= limit)
+			break;
+
+read_again:
+		buf1_len = 0;
+		entry = next_entry;
+		buf = &rx_q->buf_pool[entry];
+
+		if (dirty >= STMMAC_RX_FILL_BATCH) {
+			failure = failure ||
+				  !stmmac_rx_refill_zc(priv, queue, dirty);
+			dirty = 0;
+		}
+
+		if (priv->extend_desc)
+			p = (struct dma_desc *)(rx_q->dma_erx + entry);
+		else
+			p = rx_q->dma_rx + entry;
+
+		/* read the status of the incoming frame */
+		status = stmmac_rx_status(priv, &priv->dev->stats,
+					  &priv->xstats, p);
+		/* check if managed by the DMA otherwise go ahead */
+		if (unlikely(status & dma_own))
+			break;
+
+		/* Prefetch the next RX descriptor */
+		rx_q->cur_rx = STMMAC_GET_ENTRY(rx_q->cur_rx,
+						priv->dma_rx_size);
+		next_entry = rx_q->cur_rx;
+
+		if (priv->extend_desc)
+			np = (struct dma_desc *)(rx_q->dma_erx + next_entry);
+		else
+			np = rx_q->dma_rx + next_entry;
+
+		prefetch(np);
+
+		/* Ensure a valid XSK buffer before proceed */
+		if (!buf->xdp)
+			break;
+
+		if (priv->extend_desc)
+			stmmac_rx_extended_status(priv, &priv->dev->stats,
+						  &priv->xstats,
+						  rx_q->dma_erx + entry);
+		if (unlikely(status == discard_frame)) {
+			xsk_buff_free(buf->xdp);
+			buf->xdp = NULL;
+			dirty++;
+			error = 1;
+			if (!priv->hwts_rx_en)
+				priv->dev->stats.rx_errors++;
+		}
+
+		if (unlikely(error && (status & rx_not_ls)))
+			goto read_again;
+		if (unlikely(error)) {
+			count++;
+			continue;
+		}
+
+		/* XSK pool expects RX frame 1:1 mapped to XSK buffer */
+		if (likely(status & rx_not_ls)) {
+			xsk_buff_free(buf->xdp);
+			buf->xdp = NULL;
+			dirty++;
+			count++;
+			goto read_again;
+		}
+
+		/* XDP ZC Frame only support primary buffers for now */
+		buf1_len = stmmac_rx_buf1_len(priv, p, status, len);
+		len += buf1_len;
+
+		/* ACS is set; GMAC core strips PAD/FCS for IEEE 802.3
+		 * Type frames (LLC/LLC-SNAP)
+		 *
+		 * llc_snap is never checked in GMAC >= 4, so this ACS
+		 * feature is always disabled and packets need to be
+		 * stripped manually.
+		 */
+		if (likely(!(status & rx_not_ls)) &&
+		    (likely(priv->synopsys_id >= DWMAC_CORE_4_00) ||
+		     unlikely(status != llc_snap))) {
+			buf1_len -= ETH_FCS_LEN;
+			len -= ETH_FCS_LEN;
+		}
+
+		/* RX buffer is good and fit into a XSK pool buffer */
+		buf->xdp->data_end = buf->xdp->data + buf1_len;
+		xsk_buff_dma_sync_for_cpu(buf->xdp, rx_q->xsk_pool);
+
+		prog = READ_ONCE(priv->xdp_prog);
+		res = __stmmac_xdp_run_prog(priv, prog, buf->xdp);
+
+		switch (res) {
+		case STMMAC_XDP_PASS:
+			stmmac_dispatch_skb_zc(priv, queue, p, np, buf->xdp);
+			xsk_buff_free(buf->xdp);
+			break;
+		case STMMAC_XDP_CONSUMED:
+			xsk_buff_free(buf->xdp);
+			priv->dev->stats.rx_dropped++;
+			break;
+		case STMMAC_XDP_TX:
+		case STMMAC_XDP_REDIRECT:
+			xdp_status |= res;
+			break;
+		}
+
+		buf->xdp = NULL;
+		dirty++;
+		count++;
+	}
+
+	if (status & rx_not_ls) {
+		rx_q->state_saved = true;
+		rx_q->state.error = error;
+		rx_q->state.len = len;
+	}
+
+	stmmac_finalize_xdp_rx(priv, xdp_status);
+
+	priv->xstats.rx_pkt_n += count;
+	priv->xstats.rxq_stats[queue].rx_pkt_n += count;
+
+	if (xsk_uses_need_wakeup(rx_q->xsk_pool)) {
+		if (failure || stmmac_rx_dirty(priv, queue) > 0)
+			xsk_set_rx_need_wakeup(rx_q->xsk_pool);
+		else
+			xsk_clear_rx_need_wakeup(rx_q->xsk_pool);
+
+		return (int)count;
+	}
+
+	return failure ? limit : (int)count;
+}
+
+/**
+ * stmmac_rx - manage the receive process
+ * @priv: driver private structure
+ * @limit: napi bugget
+ * @queue: RX queue index.
+ * Description :  this the function called by the napi poll method.
+ * It gets all the frames inside the ring.
+ */
+static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
+{
+	struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+	struct stmmac_channel *ch = &priv->channel[queue];
+	unsigned int count = 0, error = 0, len = 0;
+	int status = 0, coe = priv->hw->rx_csum;
+	unsigned int next_entry = rx_q->cur_rx;
+	enum dma_data_direction dma_dir;
+	unsigned int desc_size;
+	struct sk_buff *skb = NULL;
+	struct xdp_buff xdp;
+	int xdp_status = 0;
+	int buf_sz;
+
+	dma_dir = page_pool_get_dma_dir(rx_q->page_pool);
+	buf_sz = DIV_ROUND_UP(priv->dma_buf_sz, PAGE_SIZE) * PAGE_SIZE;
+
+	if (netif_msg_rx_status(priv)) {
+		void *rx_head;
+
+		netdev_dbg(priv->dev, "%s: descriptor ring:\n", __func__);
+		if (priv->extend_desc) {
+			rx_head = (void *)rx_q->dma_erx;
+			desc_size = sizeof(struct dma_extended_desc);
+		} else {
+			rx_head = (void *)rx_q->dma_rx;
+			desc_size = sizeof(struct dma_desc);
+		}
+
+		stmmac_display_ring(priv, rx_head, priv->dma_rx_size, true,
+				    rx_q->dma_rx_phy, desc_size);
+	}
+	while (count < limit) {
+		unsigned int buf1_len = 0, buf2_len = 0;
+		enum pkt_hash_types hash_type;
+		struct stmmac_rx_buffer *buf;
+		struct dma_desc *np, *p;
+		int entry;
+		u32 hash;
+
+		if (!count && rx_q->state_saved) {
+			skb = rx_q->state.skb;
+			error = rx_q->state.error;
+			len = rx_q->state.len;
+		} else {
+			rx_q->state_saved = false;
+			skb = NULL;
+			error = 0;
+			len = 0;
+		}
+
+		if (count >= limit)
+			break;
+
+read_again:
+		buf1_len = 0;
+		buf2_len = 0;
+		entry = next_entry;
+		buf = &rx_q->buf_pool[entry];
+
+		if (priv->extend_desc)
+			p = (struct dma_desc *)(rx_q->dma_erx + entry);
+		else
+			p = rx_q->dma_rx + entry;
+
+		/* read the status of the incoming frame */
+		status = stmmac_rx_status(priv, &priv->dev->stats,
+				&priv->xstats, p);
+		/* check if managed by the DMA otherwise go ahead */
+		if (unlikely(status & dma_own))
+			break;
+
+		rx_q->cur_rx = STMMAC_GET_ENTRY(rx_q->cur_rx,
+						priv->dma_rx_size);
+		next_entry = rx_q->cur_rx;
+
+		if (priv->extend_desc)
+			np = (struct dma_desc *)(rx_q->dma_erx + next_entry);
+		else
+			np = rx_q->dma_rx + next_entry;
+
+		prefetch(np);
+
+		if (priv->extend_desc)
+			stmmac_rx_extended_status(priv, &priv->dev->stats,
+					&priv->xstats, rx_q->dma_erx + entry);
+		if (unlikely(status == discard_frame)) {
+			page_pool_recycle_direct(rx_q->page_pool, buf->page);
+			buf->page = NULL;
+			error = 1;
+			if (!priv->hwts_rx_en)
+				priv->dev->stats.rx_errors++;
+		}
+
+		if (unlikely(error && (status & rx_not_ls)))
+			goto read_again;
+		if (unlikely(error)) {
+			dev_kfree_skb(skb);
+			skb = NULL;
+			count++;
+			continue;
+		}
+
+		/* Buffer is good. Go on. */
+
+		prefetch(page_address(buf->page) + buf->page_offset);
+		if (buf->sec_page)
+			prefetch(page_address(buf->sec_page));
+
+		buf1_len = stmmac_rx_buf1_len(priv, p, status, len);
+		len += buf1_len;
+		buf2_len = stmmac_rx_buf2_len(priv, p, status, len);
+		len += buf2_len;
+
+		/* ACS is set; GMAC core strips PAD/FCS for IEEE 802.3
+		 * Type frames (LLC/LLC-SNAP)
+		 *
+		 * llc_snap is never checked in GMAC >= 4, so this ACS
+		 * feature is always disabled and packets need to be
+		 * stripped manually.
+		 */
+		if (likely(!(status & rx_not_ls)) &&
+		    (likely(priv->synopsys_id >= DWMAC_CORE_4_00) ||
+		     unlikely(status != llc_snap))) {
+			if (buf2_len) {
+				buf2_len -= ETH_FCS_LEN;
+				len -= ETH_FCS_LEN;
+			} else if (buf1_len) {
+				buf1_len -= ETH_FCS_LEN;
+				len -= ETH_FCS_LEN;
+			}
+		}
+
+		if (!skb) {
+			unsigned int pre_len, sync_len;
+
+			dma_sync_single_for_cpu(priv->device, buf->addr,
+						buf1_len, dma_dir);
+
+			xdp_init_buff(&xdp, buf_sz, &rx_q->xdp_rxq);
+			xdp_prepare_buff(&xdp, page_address(buf->page),
+					 buf->page_offset, buf1_len, false);
+
+			pre_len = xdp.data_end - xdp.data_hard_start -
+				  buf->page_offset;
+			skb = stmmac_xdp_run_prog(priv, &xdp);
+			/* Due xdp_adjust_tail: DMA sync for_device
+			 * cover max len CPU touch
+			 */
+			sync_len = xdp.data_end - xdp.data_hard_start -
+				   buf->page_offset;
+			sync_len = max(sync_len, pre_len);
+
+			/* For Not XDP_PASS verdict */
+			if (IS_ERR(skb)) {
+				unsigned int xdp_res = -PTR_ERR(skb);
+
+				if (xdp_res & STMMAC_XDP_CONSUMED) {
+					page_pool_put_page(rx_q->page_pool,
+							   virt_to_head_page(xdp.data),
+							   sync_len, true);
+					buf->page = NULL;
+					priv->dev->stats.rx_dropped++;
+
+					/* Clear skb as it was set as
+					 * status by XDP program.
+					 */
+					skb = NULL;
+
+					if (unlikely((status & rx_not_ls)))
+						goto read_again;
+
+					count++;
+					continue;
+				} else if (xdp_res & (STMMAC_XDP_TX |
+						      STMMAC_XDP_REDIRECT)) {
+					xdp_status |= xdp_res;
+					buf->page = NULL;
+					skb = NULL;
+					count++;
+					continue;
+				}
+			}
+		}
+
+		if (!skb) {
+			/* XDP program may expand or reduce tail */
+			buf1_len = xdp.data_end - xdp.data;
+
+			skb = napi_alloc_skb(&ch->rx_napi, buf1_len);
+			if (!skb) {
+				priv->dev->stats.rx_dropped++;
+				count++;
+				goto drain_data;
+			}
+
+			/* XDP program may adjust header */
+			skb_copy_to_linear_data(skb, xdp.data, buf1_len);
+			skb_put(skb, buf1_len);
+
+			/* Data payload copied into SKB, page ready for recycle */
+			page_pool_recycle_direct(rx_q->page_pool, buf->page);
+			buf->page = NULL;
+		} else if (buf1_len) {
+			dma_sync_single_for_cpu(priv->device, buf->addr,
+						buf1_len, dma_dir);
+			skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
+					buf->page, buf->page_offset, buf1_len,
+					priv->dma_buf_sz);
+
+			/* Data payload appended into SKB */
+			page_pool_release_page(rx_q->page_pool, buf->page);
+			buf->page = NULL;
+		}
+
+		if (buf2_len) {
+			dma_sync_single_for_cpu(priv->device, buf->sec_addr,
+						buf2_len, dma_dir);
+			skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
+					buf->sec_page, 0, buf2_len,
+					priv->dma_buf_sz);
+
+			/* Data payload appended into SKB */
+			page_pool_release_page(rx_q->page_pool, buf->sec_page);
+			buf->sec_page = NULL;
+		}
+
+drain_data:
+		if (likely(status & rx_not_ls))
+			goto read_again;
+		if (!skb)
+			continue;
+
+		/* Got entire packet into SKB. Finish it. */
+
+		stmmac_get_rx_hwtstamp(priv, p, np, skb);
+		stmmac_rx_vlan(priv->dev, skb);
+		skb->protocol = eth_type_trans(skb, priv->dev);
+
+		if (unlikely(!coe))
+			skb_checksum_none_assert(skb);
+		else
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+		if (!stmmac_get_rx_hash(priv, p, &hash, &hash_type))
+			skb_set_hash(skb, hash, hash_type);
+
+		skb_record_rx_queue(skb, queue);
+		napi_gro_receive(&ch->rx_napi, skb);
+		skb = NULL;
+
+		priv->dev->stats.rx_packets++;
+		priv->dev->stats.rx_bytes += len;
+		count++;
+	}
+
+	if (status & rx_not_ls || skb) {
+		rx_q->state_saved = true;
+		rx_q->state.skb = skb;
+		rx_q->state.error = error;
+		rx_q->state.len = len;
+	}
+
+	stmmac_finalize_xdp_rx(priv, xdp_status);
+
+	stmmac_rx_refill(priv, queue);
+
+	priv->xstats.rx_pkt_n += count;
+	priv->xstats.rxq_stats[queue].rx_pkt_n += count;
+
+	return count;
+}
+
+static int stmmac_napi_poll_rx(struct napi_struct *napi, int budget)
+{
+	struct stmmac_channel *ch =
+		container_of(napi, struct stmmac_channel, rx_napi);
+	struct stmmac_priv *priv = ch->priv_data;
+	u32 chan = ch->index;
+	int work_done;
+
+	priv->xstats.napi_poll++;
+
+	work_done = stmmac_rx(priv, budget, chan);
+	if (work_done < budget && napi_complete_done(napi, work_done)) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&ch->lock, flags);
+		stmmac_enable_dma_irq(priv, priv->ioaddr, chan, 1, 0);
+		spin_unlock_irqrestore(&ch->lock, flags);
+	}
+
+	return work_done;
+}
+
+static int stmmac_napi_poll_tx(struct napi_struct *napi, int budget)
+{
+	struct stmmac_channel *ch =
+		container_of(napi, struct stmmac_channel, tx_napi);
+	struct stmmac_priv *priv = ch->priv_data;
+	u32 chan = ch->index;
+	int work_done;
+
+	priv->xstats.napi_poll++;
+
+	work_done = stmmac_tx_clean(priv, budget, chan);
+	work_done = min(work_done, budget);
+
+	if (work_done < budget && napi_complete_done(napi, work_done)) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&ch->lock, flags);
+		stmmac_enable_dma_irq(priv, priv->ioaddr, chan, 0, 1);
+		spin_unlock_irqrestore(&ch->lock, flags);
+	}
+
+	return work_done;
+}
+
+static int stmmac_napi_poll_rxtx(struct napi_struct *napi, int budget)
+{
+	struct stmmac_channel *ch =
+		container_of(napi, struct stmmac_channel, rxtx_napi);
+	struct stmmac_priv *priv = ch->priv_data;
+	int rx_done, tx_done, rxtx_done;
+	u32 chan = ch->index;
+
+	priv->xstats.napi_poll++;
+
+	tx_done = stmmac_tx_clean(priv, budget, chan);
+	tx_done = min(tx_done, budget);
+
+	rx_done = stmmac_rx_zc(priv, budget, chan);
+
+	rxtx_done = max(tx_done, rx_done);
+
+	/* If either TX or RX work is not complete, return budget
+	 * and keep pooling
+	 */
+	if (rxtx_done >= budget)
+		return budget;
+
+	/* all work done, exit the polling mode */
+	if (napi_complete_done(napi, rxtx_done)) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&ch->lock, flags);
+		/* Both RX and TX work done are compelte,
+		 * so enable both RX & TX IRQs.
+		 */
+		stmmac_enable_dma_irq(priv, priv->ioaddr, chan, 1, 1);
+		spin_unlock_irqrestore(&ch->lock, flags);
+	}
+
+	return min(rxtx_done, budget - 1);
+}
+
+/**
+ *  stmmac_tx_timeout
+ *  @dev : Pointer to net device structure
+ *  @txqueue: the index of the hanging transmit queue
+ *  Description: this function is called when a packet transmission fails to
+ *   complete within a reasonable time. The driver will mark the error in the
+ *   netdev structure and arrange for the device to be reset to a sane state
+ *   in order to transmit a new packet.
+ */
+static void stmmac_tx_timeout(struct net_device *dev, unsigned int txqueue)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	stmmac_global_err(priv);
+}
+
+/**
+ *  stmmac_set_rx_mode - entry point for multicast addressing
+ *  @dev : pointer to the device structure
+ *  Description:
+ *  This function is a driver entry point which gets called by the kernel
+ *  whenever multicast addresses must be enabled/disabled.
+ *  Return value:
+ *  void.
+ */
+static void stmmac_set_rx_mode(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	stmmac_set_filter(priv, priv->hw, dev);
+}
+
+/**
+ *  stmmac_change_mtu - entry point to change MTU size for the device.
+ *  @dev : device pointer.
+ *  @new_mtu : the new MTU size for the device.
+ *  Description: the Maximum Transfer Unit (MTU) is used by the network layer
+ *  to drive packet transmission. Ethernet has an MTU of 1500 octets
+ *  (ETH_DATA_LEN). This value can be changed with ifconfig.
+ *  Return value:
+ *  0 on success and an appropriate (-)ve integer as defined in errno.h
+ *  file on failure.
+ */
+static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	int txfifosz = priv->plat->tx_fifo_size;
+	const int mtu = new_mtu;
+
+	if (txfifosz == 0)
+		txfifosz = priv->dma_cap.tx_fifo_size;
+
+	txfifosz /= priv->plat->tx_queues_to_use;
+
+	if (netif_running(dev)) {
+		netdev_err(priv->dev, "must be stopped to change its MTU\n");
+		return -EBUSY;
+	}
+
+	if (stmmac_xdp_is_enabled(priv) && new_mtu > ETH_DATA_LEN) {
+		netdev_dbg(priv->dev, "Jumbo frames not supported for XDP\n");
+		return -EINVAL;
+	}
+
+	new_mtu = STMMAC_ALIGN(new_mtu);
+
+	/* If condition true, FIFO is too small or MTU too large */
+	if ((txfifosz < new_mtu) || (new_mtu > BUF_SIZE_16KiB))
+		return -EINVAL;
+
+	dev->mtu = mtu;
+
+	netdev_update_features(dev);
+
+	return 0;
+}
+
+static netdev_features_t stmmac_fix_features(struct net_device *dev,
+					     netdev_features_t features)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	if (priv->plat->rx_coe == STMMAC_RX_COE_NONE)
+		features &= ~NETIF_F_RXCSUM;
+
+	if (!priv->plat->tx_coe)
+		features &= ~NETIF_F_CSUM_MASK;
+
+	/* Some GMAC devices have a bugged Jumbo frame support that
+	 * needs to have the Tx COE disabled for oversized frames
+	 * (due to limited buffer sizes). In this case we disable
+	 * the TX csum insertion in the TDES and not use SF.
+	 */
+	if (priv->plat->bugged_jumbo && (dev->mtu > ETH_DATA_LEN))
+		features &= ~NETIF_F_CSUM_MASK;
+
+	/* Disable tso if asked by ethtool */
+	if ((priv->plat->tso_en) && (priv->dma_cap.tsoen)) {
+		if (features & NETIF_F_TSO)
+			priv->tso = true;
+		else
+			priv->tso = false;
+	}
+
+	return features;
+}
+
+static int stmmac_set_features(struct net_device *netdev,
+			       netdev_features_t features)
+{
+	struct stmmac_priv *priv = netdev_priv(netdev);
+
+	/* Keep the COE Type in case of csum is supporting */
+	if (features & NETIF_F_RXCSUM)
+		priv->hw->rx_csum = priv->plat->rx_coe;
+	else
+		priv->hw->rx_csum = 0;
+	/* No check needed because rx_coe has been set before and it will be
+	 * fixed in case of issue.
+	 */
+	stmmac_rx_ipc(priv, priv->hw);
+
+	if (priv->sph_cap) {
+		bool sph_en = (priv->hw->rx_csum > 0) && priv->sph;
+		u32 chan;
+
+		for (chan = 0; chan < priv->plat->rx_queues_to_use; chan++)
+			stmmac_enable_sph(priv, priv->ioaddr, sph_en, chan);
+	}
+
+	return 0;
+}
+
+static void stmmac_fpe_event_status(struct stmmac_priv *priv, int status)
+{
+	struct stmmac_fpe_cfg *fpe_cfg = priv->plat->fpe_cfg;
+	enum stmmac_fpe_state *lo_state = &fpe_cfg->lo_fpe_state;
+	enum stmmac_fpe_state *lp_state = &fpe_cfg->lp_fpe_state;
+	bool *hs_enable = &fpe_cfg->hs_enable;
+
+	if (status == FPE_EVENT_UNKNOWN || !*hs_enable)
+		return;
+
+	/* If LP has sent verify mPacket, LP is FPE capable */
+	if ((status & FPE_EVENT_RVER) == FPE_EVENT_RVER) {
+		if (*lp_state < FPE_STATE_CAPABLE)
+			*lp_state = FPE_STATE_CAPABLE;
+
+		/* If user has requested FPE enable, quickly response */
+		if (*hs_enable)
+			stmmac_fpe_send_mpacket(priv, priv->ioaddr,
+						MPACKET_RESPONSE);
+	}
+
+	/* If Local has sent verify mPacket, Local is FPE capable */
+	if ((status & FPE_EVENT_TVER) == FPE_EVENT_TVER) {
+		if (*lo_state < FPE_STATE_CAPABLE)
+			*lo_state = FPE_STATE_CAPABLE;
+	}
+
+	/* If LP has sent response mPacket, LP is entering FPE ON */
+	if ((status & FPE_EVENT_RRSP) == FPE_EVENT_RRSP)
+		*lp_state = FPE_STATE_ENTERING_ON;
+
+	/* If Local has sent response mPacket, Local is entering FPE ON */
+	if ((status & FPE_EVENT_TRSP) == FPE_EVENT_TRSP)
+		*lo_state = FPE_STATE_ENTERING_ON;
+
+	if (!test_bit(__FPE_REMOVING, &priv->fpe_task_state) &&
+	    !test_and_set_bit(__FPE_TASK_SCHED, &priv->fpe_task_state) &&
+	    priv->fpe_wq) {
+		queue_work(priv->fpe_wq, &priv->fpe_task);
+	}
+}
+
+static void stmmac_common_interrupt(struct stmmac_priv *priv)
+{
+	u32 rx_cnt = priv->plat->rx_queues_to_use;
+	u32 tx_cnt = priv->plat->tx_queues_to_use;
+	u32 queues_count;
+	u32 queue;
+	bool xmac;
+
+	xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
+	queues_count = (rx_cnt > tx_cnt) ? rx_cnt : tx_cnt;
+
+	if (priv->irq_wake)
+		pm_wakeup_event(priv->device, 0);
+
+	if (priv->dma_cap.estsel)
+		stmmac_est_irq_status(priv, priv->ioaddr, priv->dev,
+				      &priv->xstats, tx_cnt);
+
+	if (priv->dma_cap.fpesel) {
+		int status = stmmac_fpe_irq_status(priv, priv->ioaddr,
+						   priv->dev);
+
+		stmmac_fpe_event_status(priv, status);
+	}
+
+	/* To handle GMAC own interrupts */
+	if ((priv->plat->has_gmac) || xmac) {
+		int status = stmmac_host_irq_status(priv, priv->hw, &priv->xstats);
+
+		if (unlikely(status)) {
+			/* For LPI we need to save the tx status */
+			if (status & CORE_IRQ_TX_PATH_IN_LPI_MODE)
+				priv->tx_path_in_lpi_mode = true;
+			if (status & CORE_IRQ_TX_PATH_EXIT_LPI_MODE)
+				priv->tx_path_in_lpi_mode = false;
+		}
+
+		for (queue = 0; queue < queues_count; queue++) {
+			status = stmmac_host_mtl_irq_status(priv, priv->hw,
+							    queue);
+		}
+
+		/* PCS link status */
+		if (priv->hw->pcs) {
+			if (priv->xstats.pcs_link)
+				netif_carrier_on(priv->dev);
+			else
+				netif_carrier_off(priv->dev);
+		}
+
+		stmmac_timestamp_interrupt(priv, priv);
+	}
+}
+
+/**
+ *  stmmac_interrupt - main ISR
+ *  @irq: interrupt number.
+ *  @dev_id: to pass the net device pointer.
+ *  Description: this is the main driver interrupt service routine.
+ *  It can call:
+ *  o DMA service routine (to manage incoming frame reception and transmission
+ *    status)
+ *  o Core interrupts to manage: remote wake-up, management counter, LPI
+ *    interrupts.
+ */
+static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = (struct net_device *)dev_id;
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	/* Check if adapter is up */
+	if (test_bit(STMMAC_DOWN, &priv->state))
+		return IRQ_HANDLED;
+
+	/* Check if a fatal error happened */
+	if (stmmac_safety_feat_interrupt(priv))
+		return IRQ_HANDLED;
+
+	/* To handle Common interrupts */
+	stmmac_common_interrupt(priv);
+
+	/* To handle DMA interrupts */
+	stmmac_dma_interrupt(priv);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t stmmac_mac_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = (struct net_device *)dev_id;
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	if (unlikely(!dev)) {
+		netdev_err(priv->dev, "%s: invalid dev pointer\n", __func__);
+		return IRQ_NONE;
+	}
+
+	/* Check if adapter is up */
+	if (test_bit(STMMAC_DOWN, &priv->state))
+		return IRQ_HANDLED;
+
+	/* To handle Common interrupts */
+	stmmac_common_interrupt(priv);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t stmmac_safety_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = (struct net_device *)dev_id;
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	if (unlikely(!dev)) {
+		netdev_err(priv->dev, "%s: invalid dev pointer\n", __func__);
+		return IRQ_NONE;
+	}
+
+	/* Check if adapter is up */
+	if (test_bit(STMMAC_DOWN, &priv->state))
+		return IRQ_HANDLED;
+
+	/* Check if a fatal error happened */
+	stmmac_safety_feat_interrupt(priv);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t stmmac_msi_intr_tx(int irq, void *data)
+{
+	struct stmmac_tx_queue *tx_q = (struct stmmac_tx_queue *)data;
+	int chan = tx_q->queue_index;
+	struct stmmac_priv *priv;
+	int status;
+
+	priv = container_of(tx_q, struct stmmac_priv, tx_queue[chan]);
+
+	if (unlikely(!data)) {
+		netdev_err(priv->dev, "%s: invalid dev pointer\n", __func__);
+		return IRQ_NONE;
+	}
+
+	/* Check if adapter is up */
+	if (test_bit(STMMAC_DOWN, &priv->state))
+		return IRQ_HANDLED;
+
+	status = stmmac_napi_check(priv, chan, DMA_DIR_TX);
+
+	if (unlikely(status & tx_hard_error_bump_tc)) {
+		/* Try to bump up the dma threshold on this failure */
+		stmmac_bump_dma_threshold(priv, chan);
+	} else if (unlikely(status == tx_hard_error)) {
+		stmmac_tx_err(priv, chan);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t stmmac_msi_intr_rx(int irq, void *data)
+{
+	struct stmmac_rx_queue *rx_q = (struct stmmac_rx_queue *)data;
+	int chan = rx_q->queue_index;
+	struct stmmac_priv *priv;
+
+	priv = container_of(rx_q, struct stmmac_priv, rx_queue[chan]);
+
+	if (unlikely(!data)) {
+		netdev_err(priv->dev, "%s: invalid dev pointer\n", __func__);
+		return IRQ_NONE;
+	}
+
+	/* Check if adapter is up */
+	if (test_bit(STMMAC_DOWN, &priv->state))
+		return IRQ_HANDLED;
+
+	stmmac_napi_check(priv, chan, DMA_DIR_RX);
+
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* Polling receive - used by NETCONSOLE and other diagnostic tools
+ * to allow network I/O with interrupts disabled.
+ */
+static void stmmac_poll_controller(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	int i;
+
+	/* If adapter is down, do nothing */
+	if (test_bit(STMMAC_DOWN, &priv->state))
+		return;
+
+	if (priv->plat->multi_msi_en) {
+		for (i = 0; i < priv->plat->rx_queues_to_use; i++)
+			stmmac_msi_intr_rx(0, &priv->rx_queue[i]);
+
+		for (i = 0; i < priv->plat->tx_queues_to_use; i++)
+			stmmac_msi_intr_tx(0, &priv->tx_queue[i]);
+	} else {
+		disable_irq(dev->irq);
+		stmmac_interrupt(dev->irq, dev);
+		enable_irq(dev->irq);
+	}
+}
+#endif
+
+/**
+ *  stmmac_ioctl - Entry point for the Ioctl
+ *  @dev: Device pointer.
+ *  @rq: An IOCTL specefic structure, that can contain a pointer to
+ *  a proprietary structure used to pass information to the driver.
+ *  @cmd: IOCTL command
+ *  Description:
+ *  Currently it supports the phy_mii_ioctl(...) and HW time stamping.
+ */
+static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct stmmac_priv *priv = netdev_priv (dev);
+	int ret = -EOPNOTSUPP;
+
+	if (!netif_running(dev))
+		return -EINVAL;
+
+	switch (cmd) {
+	case SIOCGMIIPHY:
+	case SIOCGMIIREG:
+	case SIOCSMIIREG:
+		ret = phylink_mii_ioctl(priv->phylink, rq, cmd);
+		break;
+	case SIOCSHWTSTAMP:
+		ret = stmmac_hwtstamp_set(dev, rq);
+		break;
+	case SIOCGHWTSTAMP:
+		ret = stmmac_hwtstamp_get(dev, rq);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static int stmmac_setup_tc_block_cb(enum tc_setup_type type, void *type_data,
+				    void *cb_priv)
+{
+	struct stmmac_priv *priv = cb_priv;
+	int ret = -EOPNOTSUPP;
+
+	if (!tc_cls_can_offload_and_chain0(priv->dev, type_data))
+		return ret;
+
+	__stmmac_disable_all_queues(priv);
+
+	switch (type) {
+	case TC_SETUP_CLSU32:
+		ret = stmmac_tc_setup_cls_u32(priv, priv, type_data);
+		break;
+	case TC_SETUP_CLSFLOWER:
+		ret = stmmac_tc_setup_cls(priv, priv, type_data);
+		break;
+	default:
+		break;
+	}
+
+	stmmac_enable_all_queues(priv);
+	return ret;
+}
+
+static LIST_HEAD(stmmac_block_cb_list);
+
+static int stmmac_setup_tc(struct net_device *ndev, enum tc_setup_type type,
+			   void *type_data)
+{
+	struct stmmac_priv *priv = netdev_priv(ndev);
+
+	switch (type) {
+	case TC_SETUP_BLOCK:
+		return flow_block_cb_setup_simple(type_data,
+						  &stmmac_block_cb_list,
+						  stmmac_setup_tc_block_cb,
+						  priv, priv, true);
+	case TC_SETUP_QDISC_CBS:
+		return stmmac_tc_setup_cbs(priv, priv, type_data);
+	case TC_SETUP_QDISC_TAPRIO:
+		return stmmac_tc_setup_taprio(priv, priv, type_data);
+	case TC_SETUP_QDISC_ETF:
+		return stmmac_tc_setup_etf(priv, priv, type_data);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static u16 stmmac_select_queue(struct net_device *dev, struct sk_buff *skb,
+			       struct net_device *sb_dev)
+{
+	int gso = skb_shinfo(skb)->gso_type;
+
+	if (gso & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6 | SKB_GSO_UDP_L4)) {
+		/*
+		 * There is no way to determine the number of TSO/USO
+		 * capable Queues. Let's use always the Queue 0
+		 * because if TSO/USO is supported then at least this
+		 * one will be capable.
+		 */
+		return 0;
+	}
+
+	return netdev_pick_tx(dev, skb, NULL) % dev->real_num_tx_queues;
+}
+
+static int stmmac_set_mac_address(struct net_device *ndev, void *addr)
+{
+	struct stmmac_priv *priv = netdev_priv(ndev);
+	int ret = 0;
+
+	ret = pm_runtime_get_sync(priv->device);
+	if (ret < 0) {
+		pm_runtime_put_noidle(priv->device);
+		return ret;
+	}
+
+	ret = eth_mac_addr(ndev, addr);
+	if (ret)
+		goto set_mac_error;
+
+	stmmac_set_umac_addr(priv, priv->hw, ndev->dev_addr, 0);
+
+set_mac_error:
+	pm_runtime_put(priv->device);
+
+	return ret;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static struct dentry *stmmac_fs_dir;
+
+static void sysfs_display_ring(void *head, int size, int extend_desc,
+			       struct seq_file *seq, dma_addr_t dma_phy_addr)
+{
+	int i;
+	struct dma_extended_desc *ep = (struct dma_extended_desc *)head;
+	struct dma_desc *p = (struct dma_desc *)head;
+	dma_addr_t dma_addr;
+
+	for (i = 0; i < size; i++) {
+		if (extend_desc) {
+			dma_addr = dma_phy_addr + i * sizeof(*ep);
+			seq_printf(seq, "%d [%pad]: 0x%x 0x%x 0x%x 0x%x\n",
+				   i, &dma_addr,
+				   le32_to_cpu(ep->basic.des0),
+				   le32_to_cpu(ep->basic.des1),
+				   le32_to_cpu(ep->basic.des2),
+				   le32_to_cpu(ep->basic.des3));
+			ep++;
+		} else {
+			dma_addr = dma_phy_addr + i * sizeof(*p);
+			seq_printf(seq, "%d [%pad]: 0x%x 0x%x 0x%x 0x%x\n",
+				   i, &dma_addr,
+				   le32_to_cpu(p->des0), le32_to_cpu(p->des1),
+				   le32_to_cpu(p->des2), le32_to_cpu(p->des3));
+			p++;
+		}
+		seq_printf(seq, "\n");
+	}
+}
+
+static int stmmac_rings_status_show(struct seq_file *seq, void *v)
+{
+	struct net_device *dev = seq->private;
+	struct stmmac_priv *priv = netdev_priv(dev);
+	u32 rx_count = priv->plat->rx_queues_to_use;
+	u32 tx_count = priv->plat->tx_queues_to_use;
+	u32 queue;
+
+	if ((dev->flags & IFF_UP) == 0)
+		return 0;
+
+	for (queue = 0; queue < rx_count; queue++) {
+		struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+
+		seq_printf(seq, "RX Queue %d:\n", queue);
+
+		if (priv->extend_desc) {
+			seq_printf(seq, "Extended descriptor ring:\n");
+			sysfs_display_ring((void *)rx_q->dma_erx,
+					   priv->dma_rx_size, 1, seq, rx_q->dma_rx_phy);
+		} else {
+			seq_printf(seq, "Descriptor ring:\n");
+			sysfs_display_ring((void *)rx_q->dma_rx,
+					   priv->dma_rx_size, 0, seq, rx_q->dma_rx_phy);
+		}
+	}
+
+	for (queue = 0; queue < tx_count; queue++) {
+		struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
+
+		seq_printf(seq, "TX Queue %d:\n", queue);
+
+		if (priv->extend_desc) {
+			seq_printf(seq, "Extended descriptor ring:\n");
+			sysfs_display_ring((void *)tx_q->dma_etx,
+					   priv->dma_tx_size, 1, seq, tx_q->dma_tx_phy);
+		} else if (!(tx_q->tbs & STMMAC_TBS_AVAIL)) {
+			seq_printf(seq, "Descriptor ring:\n");
+			sysfs_display_ring((void *)tx_q->dma_tx,
+					   priv->dma_tx_size, 0, seq, tx_q->dma_tx_phy);
+		}
+	}
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(stmmac_rings_status);
+
+static int stmmac_dma_cap_show(struct seq_file *seq, void *v)
+{
+	struct net_device *dev = seq->private;
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	if (!priv->hw_cap_support) {
+		seq_printf(seq, "DMA HW features not supported\n");
+		return 0;
+	}
+
+	seq_printf(seq, "==============================\n");
+	seq_printf(seq, "\tDMA HW features\n");
+	seq_printf(seq, "==============================\n");
+
+	seq_printf(seq, "\t10/100 Mbps: %s\n",
+		   (priv->dma_cap.mbps_10_100) ? "Y" : "N");
+	seq_printf(seq, "\t1000 Mbps: %s\n",
+		   (priv->dma_cap.mbps_1000) ? "Y" : "N");
+	seq_printf(seq, "\tHalf duplex: %s\n",
+		   (priv->dma_cap.half_duplex) ? "Y" : "N");
+	seq_printf(seq, "\tHash Filter: %s\n",
+		   (priv->dma_cap.hash_filter) ? "Y" : "N");
+	seq_printf(seq, "\tMultiple MAC address registers: %s\n",
+		   (priv->dma_cap.multi_addr) ? "Y" : "N");
+	seq_printf(seq, "\tPCS (TBI/SGMII/RTBI PHY interfaces): %s\n",
+		   (priv->dma_cap.pcs) ? "Y" : "N");
+	seq_printf(seq, "\tSMA (MDIO) Interface: %s\n",
+		   (priv->dma_cap.sma_mdio) ? "Y" : "N");
+	seq_printf(seq, "\tPMT Remote wake up: %s\n",
+		   (priv->dma_cap.pmt_remote_wake_up) ? "Y" : "N");
+	seq_printf(seq, "\tPMT Magic Frame: %s\n",
+		   (priv->dma_cap.pmt_magic_frame) ? "Y" : "N");
+	seq_printf(seq, "\tRMON module: %s\n",
+		   (priv->dma_cap.rmon) ? "Y" : "N");
+	seq_printf(seq, "\tIEEE 1588-2002 Time Stamp: %s\n",
+		   (priv->dma_cap.time_stamp) ? "Y" : "N");
+	seq_printf(seq, "\tIEEE 1588-2008 Advanced Time Stamp: %s\n",
+		   (priv->dma_cap.atime_stamp) ? "Y" : "N");
+	seq_printf(seq, "\t802.3az - Energy-Efficient Ethernet (EEE): %s\n",
+		   (priv->dma_cap.eee) ? "Y" : "N");
+	seq_printf(seq, "\tAV features: %s\n", (priv->dma_cap.av) ? "Y" : "N");
+	seq_printf(seq, "\tChecksum Offload in TX: %s\n",
+		   (priv->dma_cap.tx_coe) ? "Y" : "N");
+	if (priv->synopsys_id >= DWMAC_CORE_4_00) {
+		seq_printf(seq, "\tIP Checksum Offload in RX: %s\n",
+			   (priv->dma_cap.rx_coe) ? "Y" : "N");
+	} else {
+		seq_printf(seq, "\tIP Checksum Offload (type1) in RX: %s\n",
+			   (priv->dma_cap.rx_coe_type1) ? "Y" : "N");
+		seq_printf(seq, "\tIP Checksum Offload (type2) in RX: %s\n",
+			   (priv->dma_cap.rx_coe_type2) ? "Y" : "N");
+	}
+	seq_printf(seq, "\tRXFIFO > 2048bytes: %s\n",
+		   (priv->dma_cap.rxfifo_over_2048) ? "Y" : "N");
+	seq_printf(seq, "\tNumber of Additional RX channel: %d\n",
+		   priv->dma_cap.number_rx_channel);
+	seq_printf(seq, "\tNumber of Additional TX channel: %d\n",
+		   priv->dma_cap.number_tx_channel);
+	seq_printf(seq, "\tNumber of Additional RX queues: %d\n",
+		   priv->dma_cap.number_rx_queues);
+	seq_printf(seq, "\tNumber of Additional TX queues: %d\n",
+		   priv->dma_cap.number_tx_queues);
+	seq_printf(seq, "\tEnhanced descriptors: %s\n",
+		   (priv->dma_cap.enh_desc) ? "Y" : "N");
+	seq_printf(seq, "\tTX Fifo Size: %d\n", priv->dma_cap.tx_fifo_size);
+	seq_printf(seq, "\tRX Fifo Size: %d\n", priv->dma_cap.rx_fifo_size);
+	seq_printf(seq, "\tHash Table Size: %d\n", priv->dma_cap.hash_tb_sz);
+	seq_printf(seq, "\tTSO: %s\n", priv->dma_cap.tsoen ? "Y" : "N");
+	seq_printf(seq, "\tNumber of PPS Outputs: %d\n",
+		   priv->dma_cap.pps_out_num);
+	seq_printf(seq, "\tSafety Features: %s\n",
+		   priv->dma_cap.asp ? "Y" : "N");
+	seq_printf(seq, "\tFlexible RX Parser: %s\n",
+		   priv->dma_cap.frpsel ? "Y" : "N");
+	seq_printf(seq, "\tEnhanced Addressing: %d\n",
+		   priv->dma_cap.addr64);
+	seq_printf(seq, "\tReceive Side Scaling: %s\n",
+		   priv->dma_cap.rssen ? "Y" : "N");
+	seq_printf(seq, "\tVLAN Hash Filtering: %s\n",
+		   priv->dma_cap.vlhash ? "Y" : "N");
+	seq_printf(seq, "\tSplit Header: %s\n",
+		   priv->dma_cap.sphen ? "Y" : "N");
+	seq_printf(seq, "\tVLAN TX Insertion: %s\n",
+		   priv->dma_cap.vlins ? "Y" : "N");
+	seq_printf(seq, "\tDouble VLAN: %s\n",
+		   priv->dma_cap.dvlan ? "Y" : "N");
+	seq_printf(seq, "\tNumber of L3/L4 Filters: %d\n",
+		   priv->dma_cap.l3l4fnum);
+	seq_printf(seq, "\tARP Offloading: %s\n",
+		   priv->dma_cap.arpoffsel ? "Y" : "N");
+	seq_printf(seq, "\tEnhancements to Scheduled Traffic (EST): %s\n",
+		   priv->dma_cap.estsel ? "Y" : "N");
+	seq_printf(seq, "\tFrame Preemption (FPE): %s\n",
+		   priv->dma_cap.fpesel ? "Y" : "N");
+	seq_printf(seq, "\tTime-Based Scheduling (TBS): %s\n",
+		   priv->dma_cap.tbssel ? "Y" : "N");
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(stmmac_dma_cap);
+
+/* Use network device events to rename debugfs file entries.
+ */
+static int stmmac_device_event(struct notifier_block *unused,
+			       unsigned long event, void *ptr)
+{
+	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	if (dev->netdev_ops != &stmmac_netdev_ops)
+		goto done;
+
+	switch (event) {
+	case NETDEV_CHANGENAME:
+		if (priv->dbgfs_dir)
+			priv->dbgfs_dir = debugfs_rename(stmmac_fs_dir,
+							 priv->dbgfs_dir,
+							 stmmac_fs_dir,
+							 dev->name);
+		break;
+	}
+done:
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block stmmac_notifier = {
+	.notifier_call = stmmac_device_event,
+};
+
+static void stmmac_init_fs(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	rtnl_lock();
+
+	/* Create per netdev entries */
+	priv->dbgfs_dir = debugfs_create_dir(dev->name, stmmac_fs_dir);
+
+	/* Entry to report DMA RX/TX rings */
+	debugfs_create_file("descriptors_status", 0444, priv->dbgfs_dir, dev,
+			    &stmmac_rings_status_fops);
+
+	/* Entry to report the DMA HW features */
+	debugfs_create_file("dma_cap", 0444, priv->dbgfs_dir, dev,
+			    &stmmac_dma_cap_fops);
+
+	rtnl_unlock();
+}
+
+static void stmmac_exit_fs(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	debugfs_remove_recursive(priv->dbgfs_dir);
+}
+#endif /* CONFIG_DEBUG_FS */
+
+static u32 stmmac_vid_crc32_le(__le16 vid_le)
+{
+	unsigned char *data = (unsigned char *)&vid_le;
+	unsigned char data_byte = 0;
+	u32 crc = ~0x0;
+	u32 temp = 0;
+	int i, bits;
+
+	bits = get_bitmask_order(VLAN_VID_MASK);
+	for (i = 0; i < bits; i++) {
+		if ((i % 8) == 0)
+			data_byte = data[i / 8];
+
+		temp = ((crc & 1) ^ data_byte) & 1;
+		crc >>= 1;
+		data_byte >>= 1;
+
+		if (temp)
+			crc ^= 0xedb88320;
+	}
+
+	return crc;
+}
+
+static int stmmac_vlan_update(struct stmmac_priv *priv, bool is_double)
+{
+	u32 crc, hash = 0;
+	__le16 pmatch = 0;
+	int count = 0;
+	u16 vid = 0;
+
+	for_each_set_bit(vid, priv->active_vlans, VLAN_N_VID) {
+		__le16 vid_le = cpu_to_le16(vid);
+		crc = bitrev32(~stmmac_vid_crc32_le(vid_le)) >> 28;
+		hash |= (1 << crc);
+		count++;
+	}
+
+	if (!priv->dma_cap.vlhash) {
+		if (count > 2) /* VID = 0 always passes filter */
+			return -EOPNOTSUPP;
+
+		pmatch = cpu_to_le16(vid);
+		hash = 0;
+	}
+
+	return stmmac_update_vlan_hash(priv, priv->hw, hash, pmatch, is_double);
+}
+
+static int stmmac_vlan_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid)
+{
+	struct stmmac_priv *priv = netdev_priv(ndev);
+	bool is_double = false;
+	int ret;
+
+	if (be16_to_cpu(proto) == ETH_P_8021AD)
+		is_double = true;
+
+	set_bit(vid, priv->active_vlans);
+	ret = stmmac_vlan_update(priv, is_double);
+	if (ret) {
+		clear_bit(vid, priv->active_vlans);
+		return ret;
+	}
+
+	if (priv->hw->num_vlan) {
+		ret = stmmac_add_hw_vlan_rx_fltr(priv, ndev, priv->hw, proto, vid);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int stmmac_vlan_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vid)
+{
+	struct stmmac_priv *priv = netdev_priv(ndev);
+	bool is_double = false;
+	int ret;
+
+	ret = pm_runtime_get_sync(priv->device);
+	if (ret < 0) {
+		pm_runtime_put_noidle(priv->device);
+		return ret;
+	}
+
+	if (be16_to_cpu(proto) == ETH_P_8021AD)
+		is_double = true;
+
+	clear_bit(vid, priv->active_vlans);
+
+	if (priv->hw->num_vlan) {
+		ret = stmmac_del_hw_vlan_rx_fltr(priv, ndev, priv->hw, proto, vid);
+		if (ret)
+			goto del_vlan_error;
+	}
+
+	ret = stmmac_vlan_update(priv, is_double);
+
+del_vlan_error:
+	pm_runtime_put(priv->device);
+
+	return ret;
+}
+
+static int stmmac_bpf(struct net_device *dev, struct netdev_bpf *bpf)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	switch (bpf->command) {
+	case XDP_SETUP_PROG:
+		return stmmac_xdp_set_prog(priv, bpf->prog, bpf->extack);
+	case XDP_SETUP_XSK_POOL:
+		return stmmac_xdp_setup_pool(priv, bpf->xsk.pool,
+					     bpf->xsk.queue_id);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int stmmac_xdp_xmit(struct net_device *dev, int num_frames,
+			   struct xdp_frame **frames, u32 flags)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	int cpu = smp_processor_id();
+	struct netdev_queue *nq;
+	int i, nxmit = 0;
+	int queue;
+
+	if (unlikely(test_bit(STMMAC_DOWN, &priv->state)))
+		return -ENETDOWN;
+
+	if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK))
+		return -EINVAL;
+
+	queue = stmmac_xdp_get_tx_queue(priv, cpu);
+	nq = netdev_get_tx_queue(priv->dev, queue);
+
+	__netif_tx_lock(nq, cpu);
+	/* Avoids TX time-out as we are sharing with slow path */
+	txq_trans_cond_update(nq);
+
+	for (i = 0; i < num_frames; i++) {
+		int res;
+
+		res = stmmac_xdp_xmit_xdpf(priv, queue, frames[i], true);
+		if (res == STMMAC_XDP_CONSUMED)
+			break;
+
+		nxmit++;
+	}
+
+	if (flags & XDP_XMIT_FLUSH) {
+		stmmac_flush_tx_descriptors(priv, queue);
+		stmmac_tx_timer_arm(priv, queue);
+	}
+
+	__netif_tx_unlock(nq);
+
+	return nxmit;
+}
+
+void stmmac_disable_rx_queue(struct stmmac_priv *priv, u32 queue)
+{
+	struct stmmac_channel *ch = &priv->channel[queue];
+	unsigned long flags;
+
+	spin_lock_irqsave(&ch->lock, flags);
+	stmmac_disable_dma_irq(priv, priv->ioaddr, queue, 1, 0);
+	spin_unlock_irqrestore(&ch->lock, flags);
+
+	stmmac_stop_rx_dma(priv, queue);
+	__free_dma_rx_desc_resources(priv, queue);
+}
+
+void stmmac_enable_rx_queue(struct stmmac_priv *priv, u32 queue)
+{
+	struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+	struct stmmac_channel *ch = &priv->channel[queue];
+	unsigned long flags;
+	u32 buf_size;
+	int ret;
+
+	ret = __alloc_dma_rx_desc_resources(priv, queue);
+	if (ret) {
+		netdev_err(priv->dev, "Failed to alloc RX desc.\n");
+		return;
+	}
+
+	ret = __init_dma_rx_desc_rings(priv, queue, GFP_KERNEL);
+	if (ret) {
+		__free_dma_rx_desc_resources(priv, queue);
+		netdev_err(priv->dev, "Failed to init RX desc.\n");
+		return;
+	}
+
+	stmmac_clear_rx_descriptors(priv, queue);
+
+	stmmac_init_rx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
+			    rx_q->dma_rx_phy, rx_q->queue_index);
+
+	rx_q->rx_tail_addr = rx_q->dma_rx_phy + (rx_q->buf_alloc_num *
+			     sizeof(struct dma_desc));
+	stmmac_set_rx_tail_ptr(priv, priv->ioaddr,
+			       rx_q->rx_tail_addr, rx_q->queue_index);
+
+	if (rx_q->xsk_pool && rx_q->buf_alloc_num) {
+		buf_size = xsk_pool_get_rx_frame_size(rx_q->xsk_pool);
+		stmmac_set_dma_bfsize(priv, priv->ioaddr,
+				      buf_size,
+				      rx_q->queue_index);
+	} else {
+		stmmac_set_dma_bfsize(priv, priv->ioaddr,
+				      priv->dma_buf_sz,
+				      rx_q->queue_index);
+	}
+
+	stmmac_start_rx_dma(priv, queue);
+
+	spin_lock_irqsave(&ch->lock, flags);
+	stmmac_enable_dma_irq(priv, priv->ioaddr, queue, 1, 0);
+	spin_unlock_irqrestore(&ch->lock, flags);
+}
+
+void stmmac_disable_tx_queue(struct stmmac_priv *priv, u32 queue)
+{
+	struct stmmac_channel *ch = &priv->channel[queue];
+	unsigned long flags;
+
+	spin_lock_irqsave(&ch->lock, flags);
+	stmmac_disable_dma_irq(priv, priv->ioaddr, queue, 0, 1);
+	spin_unlock_irqrestore(&ch->lock, flags);
+
+	stmmac_stop_tx_dma(priv, queue);
+	__free_dma_tx_desc_resources(priv, queue);
+}
+
+void stmmac_enable_tx_queue(struct stmmac_priv *priv, u32 queue)
+{
+	struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
+	struct stmmac_channel *ch = &priv->channel[queue];
+	unsigned long flags;
+	int ret;
+
+	ret = __alloc_dma_tx_desc_resources(priv, queue);
+	if (ret) {
+		netdev_err(priv->dev, "Failed to alloc TX desc.\n");
+		return;
+	}
+
+	ret = __init_dma_tx_desc_rings(priv, queue);
+	if (ret) {
+		__free_dma_tx_desc_resources(priv, queue);
+		netdev_err(priv->dev, "Failed to init TX desc.\n");
+		return;
+	}
+
+	stmmac_clear_tx_descriptors(priv, queue);
+
+	stmmac_init_tx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
+			    tx_q->dma_tx_phy, tx_q->queue_index);
+
+	if (tx_q->tbs & STMMAC_TBS_AVAIL)
+		stmmac_enable_tbs(priv, priv->ioaddr, 1, tx_q->queue_index);
+
+	tx_q->tx_tail_addr = tx_q->dma_tx_phy;
+	stmmac_set_tx_tail_ptr(priv, priv->ioaddr,
+			       tx_q->tx_tail_addr, tx_q->queue_index);
+
+	stmmac_start_tx_dma(priv, queue);
+
+	spin_lock_irqsave(&ch->lock, flags);
+	stmmac_enable_dma_irq(priv, priv->ioaddr, queue, 0, 1);
+	spin_unlock_irqrestore(&ch->lock, flags);
+}
+
+void stmmac_xdp_release(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	u32 chan;
+
+	/* Disable NAPI process */
+	stmmac_disable_all_queues(priv);
+
+	for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++)
+		hrtimer_cancel(&priv->tx_queue[chan].txtimer);
+
+	/* Free the IRQ lines */
+	stmmac_free_irq(dev, REQ_IRQ_ERR_ALL, 0);
+
+	/* Stop TX/RX DMA channels */
+	stmmac_stop_all_dma(priv);
+
+	/* Release and free the Rx/Tx resources */
+	free_dma_desc_resources(priv);
+
+	/* Disable the MAC Rx/Tx */
+	stmmac_mac_set(priv, priv->ioaddr, false);
+
+	/* set trans_start so we don't get spurious
+	 * watchdogs during reset
+	 */
+	netif_trans_update(dev);
+	netif_carrier_off(dev);
+}
+
+int stmmac_xdp_open(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	u32 rx_cnt = priv->plat->rx_queues_to_use;
+	u32 tx_cnt = priv->plat->tx_queues_to_use;
+	u32 dma_csr_ch = max(rx_cnt, tx_cnt);
+	struct stmmac_rx_queue *rx_q;
+	struct stmmac_tx_queue *tx_q;
+	u32 buf_size;
+	bool sph_en;
+	u32 chan;
+	int ret;
+
+	ret = alloc_dma_desc_resources(priv);
+	if (ret < 0) {
+		netdev_err(dev, "%s: DMA descriptors allocation failed\n",
+			   __func__);
+		goto dma_desc_error;
+	}
+
+	ret = init_dma_desc_rings(dev, GFP_KERNEL);
+	if (ret < 0) {
+		netdev_err(dev, "%s: DMA descriptors initialization failed\n",
+			   __func__);
+		goto init_error;
+	}
+
+	/* DMA CSR Channel configuration */
+	for (chan = 0; chan < dma_csr_ch; chan++)
+		stmmac_init_chan(priv, priv->ioaddr, priv->plat->dma_cfg, chan);
+
+	/* Adjust Split header */
+	sph_en = (priv->hw->rx_csum > 0) && priv->sph;
+
+	/* DMA RX Channel Configuration */
+	for (chan = 0; chan < rx_cnt; chan++) {
+		rx_q = &priv->rx_queue[chan];
+
+		stmmac_init_rx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
+				    rx_q->dma_rx_phy, chan);
+
+		rx_q->rx_tail_addr = rx_q->dma_rx_phy +
+				     (rx_q->buf_alloc_num *
+				      sizeof(struct dma_desc));
+		stmmac_set_rx_tail_ptr(priv, priv->ioaddr,
+				       rx_q->rx_tail_addr, chan);
+
+		if (rx_q->xsk_pool && rx_q->buf_alloc_num) {
+			buf_size = xsk_pool_get_rx_frame_size(rx_q->xsk_pool);
+			stmmac_set_dma_bfsize(priv, priv->ioaddr,
+					      buf_size,
+					      rx_q->queue_index);
+		} else {
+			stmmac_set_dma_bfsize(priv, priv->ioaddr,
+					      priv->dma_buf_sz,
+					      rx_q->queue_index);
+		}
+
+		stmmac_enable_sph(priv, priv->ioaddr, sph_en, chan);
+	}
+
+	/* DMA TX Channel Configuration */
+	for (chan = 0; chan < tx_cnt; chan++) {
+		tx_q = &priv->tx_queue[chan];
+
+		stmmac_init_tx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
+				    tx_q->dma_tx_phy, chan);
+
+		tx_q->tx_tail_addr = tx_q->dma_tx_phy;
+		stmmac_set_tx_tail_ptr(priv, priv->ioaddr,
+				       tx_q->tx_tail_addr, chan);
+
+		hrtimer_init(&tx_q->txtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+		tx_q->txtimer.function = stmmac_tx_timer;
+	}
+
+	/* Enable the MAC Rx/Tx */
+	stmmac_mac_set(priv, priv->ioaddr, true);
+
+	/* Start Rx & Tx DMA Channels */
+	stmmac_start_all_dma(priv);
+
+	ret = stmmac_request_irq(dev);
+	if (ret)
+		goto irq_error;
+
+	/* Enable NAPI process*/
+	stmmac_enable_all_queues(priv);
+	netif_carrier_on(dev);
+	netif_tx_start_all_queues(dev);
+
+	return 0;
+
+irq_error:
+	for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++)
+		hrtimer_cancel(&priv->tx_queue[chan].txtimer);
+
+	stmmac_hw_teardown(dev);
+init_error:
+	free_dma_desc_resources(priv);
+dma_desc_error:
+	return ret;
+}
+
+int stmmac_xsk_wakeup(struct net_device *dev, u32 queue, u32 flags)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	struct stmmac_rx_queue *rx_q;
+	struct stmmac_tx_queue *tx_q;
+	struct stmmac_channel *ch;
+
+	if (test_bit(STMMAC_DOWN, &priv->state) ||
+	    !netif_carrier_ok(priv->dev))
+		return -ENETDOWN;
+
+	if (!stmmac_xdp_is_enabled(priv))
+		return -ENXIO;
+
+	if (queue >= priv->plat->rx_queues_to_use ||
+	    queue >= priv->plat->tx_queues_to_use)
+		return -EINVAL;
+
+	rx_q = &priv->rx_queue[queue];
+	tx_q = &priv->tx_queue[queue];
+	ch = &priv->channel[queue];
+
+	if (!rx_q->xsk_pool && !tx_q->xsk_pool)
+		return -ENXIO;
+
+	if (!napi_if_scheduled_mark_missed(&ch->rxtx_napi)) {
+		/* EQoS does not have per-DMA channel SW interrupt,
+		 * so we schedule RX Napi straight-away.
+		 */
+		if (likely(napi_schedule_prep(&ch->rxtx_napi)))
+			__napi_schedule(&ch->rxtx_napi);
+	}
+
+	return 0;
+}
+
+static const struct net_device_ops stmmac_netdev_ops = {
+	.ndo_open = stmmac_open,
+	.ndo_start_xmit = stmmac_xmit,
+	.ndo_stop = stmmac_release,
+	.ndo_change_mtu = stmmac_change_mtu,
+	.ndo_fix_features = stmmac_fix_features,
+	.ndo_set_features = stmmac_set_features,
+	.ndo_set_rx_mode = stmmac_set_rx_mode,
+	.ndo_tx_timeout = stmmac_tx_timeout,
+	.ndo_eth_ioctl = stmmac_ioctl,
+	.ndo_setup_tc = stmmac_setup_tc,
+	.ndo_select_queue = stmmac_select_queue,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller = stmmac_poll_controller,
+#endif
+	.ndo_set_mac_address = stmmac_set_mac_address,
+	.ndo_vlan_rx_add_vid = stmmac_vlan_rx_add_vid,
+	.ndo_vlan_rx_kill_vid = stmmac_vlan_rx_kill_vid,
+	.ndo_bpf = stmmac_bpf,
+	.ndo_xdp_xmit = stmmac_xdp_xmit,
+	.ndo_xsk_wakeup = stmmac_xsk_wakeup,
+};
+
+static void stmmac_reset_subtask(struct stmmac_priv *priv)
+{
+	if (!test_and_clear_bit(STMMAC_RESET_REQUESTED, &priv->state))
+		return;
+	if (test_bit(STMMAC_DOWN, &priv->state))
+		return;
+
+	netdev_err(priv->dev, "Reset adapter.\n");
+
+	rtnl_lock();
+	netif_trans_update(priv->dev);
+	while (test_and_set_bit(STMMAC_RESETING, &priv->state))
+		usleep_range(1000, 2000);
+
+	set_bit(STMMAC_DOWN, &priv->state);
+	dev_close(priv->dev);
+	dev_open(priv->dev, NULL);
+	clear_bit(STMMAC_DOWN, &priv->state);
+	clear_bit(STMMAC_RESETING, &priv->state);
+	rtnl_unlock();
+}
+
+static void stmmac_service_task(struct work_struct *work)
+{
+	struct stmmac_priv *priv = container_of(work, struct stmmac_priv,
+			service_task);
+
+	stmmac_reset_subtask(priv);
+	clear_bit(STMMAC_SERVICE_SCHED, &priv->state);
+}
+
+/**
+ *  stmmac_hw_init - Init the MAC device
+ *  @priv: driver private structure
+ *  Description: this function is to configure the MAC device according to
+ *  some platform parameters or the HW capability register. It prepares the
+ *  driver to use either ring or chain modes and to setup either enhanced or
+ *  normal descriptors.
+ */
+static int stmmac_hw_init(struct stmmac_priv *priv)
+{
+	int ret;
+
+	/* dwmac-sun8i only work in chain mode */
+	if (priv->plat->has_sun8i)
+		chain_mode = 1;
+	priv->chain_mode = chain_mode;
+
+	/* Initialize HW Interface */
+	ret = stmmac_hwif_init(priv);
+	if (ret)
+		return ret;
+
+	/* Get the HW capability (new GMAC newer than 3.50a) */
+	priv->hw_cap_support = stmmac_get_hw_features(priv);
+	if (priv->hw_cap_support) {
+		dev_info(priv->device, "DMA HW capability register supported\n");
+
+		/* We can override some gmac/dma configuration fields: e.g.
+		 * enh_desc, tx_coe (e.g. that are passed through the
+		 * platform) with the values from the HW capability
+		 * register (if supported).
+		 */
+		priv->plat->enh_desc = priv->dma_cap.enh_desc;
+		priv->plat->pmt = priv->dma_cap.pmt_remote_wake_up &&
+				!priv->plat->use_phy_wol;
+		priv->hw->pmt = priv->plat->pmt;
+		if (priv->dma_cap.hash_tb_sz) {
+			priv->hw->multicast_filter_bins =
+					(BIT(priv->dma_cap.hash_tb_sz) << 5);
+			priv->hw->mcast_bits_log2 =
+					ilog2(priv->hw->multicast_filter_bins);
+		}
+
+		/* TXCOE doesn't work in thresh DMA mode */
+		if (priv->plat->force_thresh_dma_mode)
+			priv->plat->tx_coe = 0;
+		else
+			priv->plat->tx_coe = priv->dma_cap.tx_coe;
+
+		/* In case of GMAC4 rx_coe is from HW cap register. */
+		priv->plat->rx_coe = priv->dma_cap.rx_coe;
+
+		if (priv->dma_cap.rx_coe_type2)
+			priv->plat->rx_coe = STMMAC_RX_COE_TYPE2;
+		else if (priv->dma_cap.rx_coe_type1)
+			priv->plat->rx_coe = STMMAC_RX_COE_TYPE1;
+
+	} else {
+		dev_info(priv->device, "No HW DMA feature register supported\n");
+	}
+
+	if (priv->plat->rx_coe) {
+		priv->hw->rx_csum = priv->plat->rx_coe;
+		dev_info(priv->device, "RX Checksum Offload Engine supported\n");
+		if (priv->synopsys_id < DWMAC_CORE_4_00)
+			dev_info(priv->device, "COE Type %d\n", priv->hw->rx_csum);
+	}
+	if (priv->plat->tx_coe)
+		dev_info(priv->device, "TX Checksum insertion supported\n");
+
+	if (priv->plat->pmt) {
+		dev_info(priv->device, "Wake-Up On Lan supported\n");
+		device_set_wakeup_capable(priv->device, 1);
+	}
+
+	if (priv->dma_cap.tsoen)
+		dev_info(priv->device, "TSO supported\n");
+
+	priv->hw->vlan_fail_q_en = priv->plat->vlan_fail_q_en;
+	priv->hw->vlan_fail_q = priv->plat->vlan_fail_q;
+
+	/* Run HW quirks, if any */
+	if (priv->hwif_quirks) {
+		ret = priv->hwif_quirks(priv);
+		if (ret)
+			return ret;
+	}
+
+	/* Rx Watchdog is available in the COREs newer than the 3.40.
+	 * In some case, for example on bugged HW this feature
+	 * has to be disable and this can be done by passing the
+	 * riwt_off field from the platform.
+	 */
+	if (((priv->synopsys_id >= DWMAC_CORE_3_50) ||
+	    (priv->plat->has_xgmac)) && (!priv->plat->riwt_off)) {
+		priv->use_riwt = 1;
+		dev_info(priv->device,
+			 "Enable RX Mitigation via HW Watchdog Timer\n");
+	}
+
+	return 0;
+}
+
+static void stmmac_napi_add(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	u32 queue, maxq;
+
+	maxq = max(priv->plat->rx_queues_to_use, priv->plat->tx_queues_to_use);
+
+	for (queue = 0; queue < maxq; queue++) {
+		struct stmmac_channel *ch = &priv->channel[queue];
+
+		ch->priv_data = priv;
+		ch->index = queue;
+		spin_lock_init(&ch->lock);
+
+		if (queue < priv->plat->rx_queues_to_use) {
+			netif_napi_add(dev, &ch->rx_napi, stmmac_napi_poll_rx,
+				       NAPI_POLL_WEIGHT);
+		}
+		if (queue < priv->plat->tx_queues_to_use) {
+			netif_tx_napi_add(dev, &ch->tx_napi,
+					  stmmac_napi_poll_tx,
+					  NAPI_POLL_WEIGHT);
+		}
+		if (queue < priv->plat->rx_queues_to_use &&
+		    queue < priv->plat->tx_queues_to_use) {
+			netif_napi_add(dev, &ch->rxtx_napi,
+				       stmmac_napi_poll_rxtx,
+				       NAPI_POLL_WEIGHT);
+		}
+	}
+}
+
+static void stmmac_napi_del(struct net_device *dev)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	u32 queue, maxq;
+
+	maxq = max(priv->plat->rx_queues_to_use, priv->plat->tx_queues_to_use);
+
+	for (queue = 0; queue < maxq; queue++) {
+		struct stmmac_channel *ch = &priv->channel[queue];
+
+		if (queue < priv->plat->rx_queues_to_use)
+			netif_napi_del(&ch->rx_napi);
+		if (queue < priv->plat->tx_queues_to_use)
+			netif_napi_del(&ch->tx_napi);
+		if (queue < priv->plat->rx_queues_to_use &&
+		    queue < priv->plat->tx_queues_to_use) {
+			netif_napi_del(&ch->rxtx_napi);
+		}
+	}
+}
+
+int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	int ret = 0;
+
+	if (netif_running(dev))
+		stmmac_release(dev);
+
+	stmmac_napi_del(dev);
+
+	priv->plat->rx_queues_to_use = rx_cnt;
+	priv->plat->tx_queues_to_use = tx_cnt;
+
+	stmmac_napi_add(dev);
+
+	if (netif_running(dev))
+		ret = stmmac_open(dev);
+
+	return ret;
+}
+
+int stmmac_reinit_ringparam(struct net_device *dev, u32 rx_size, u32 tx_size)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	int ret = 0;
+
+	if (netif_running(dev))
+		stmmac_release(dev);
+
+	priv->dma_rx_size = rx_size;
+	priv->dma_tx_size = tx_size;
+
+	if (netif_running(dev))
+		ret = stmmac_open(dev);
+
+	return ret;
+}
+
+#define SEND_VERIFY_MPAKCET_FMT "Send Verify mPacket lo_state=%d lp_state=%d\n"
+static void stmmac_fpe_lp_task(struct work_struct *work)
+{
+	struct stmmac_priv *priv = container_of(work, struct stmmac_priv,
+						fpe_task);
+	struct stmmac_fpe_cfg *fpe_cfg = priv->plat->fpe_cfg;
+	enum stmmac_fpe_state *lo_state = &fpe_cfg->lo_fpe_state;
+	enum stmmac_fpe_state *lp_state = &fpe_cfg->lp_fpe_state;
+	bool *hs_enable = &fpe_cfg->hs_enable;
+	bool *enable = &fpe_cfg->enable;
+	int retries = 20;
+
+	while (retries-- > 0) {
+		/* Bail out immediately if FPE handshake is OFF */
+		if (*lo_state == FPE_STATE_OFF || !*hs_enable)
+			break;
+
+		if (*lo_state == FPE_STATE_ENTERING_ON &&
+		    *lp_state == FPE_STATE_ENTERING_ON) {
+			stmmac_fpe_configure(priv, priv->ioaddr,
+					     priv->plat->tx_queues_to_use,
+					     priv->plat->rx_queues_to_use,
+					     *enable);
+
+			netdev_info(priv->dev, "configured FPE\n");
+
+			*lo_state = FPE_STATE_ON;
+			*lp_state = FPE_STATE_ON;
+			netdev_info(priv->dev, "!!! BOTH FPE stations ON\n");
+			break;
+		}
+
+		if ((*lo_state == FPE_STATE_CAPABLE ||
+		     *lo_state == FPE_STATE_ENTERING_ON) &&
+		     *lp_state != FPE_STATE_ON) {
+			netdev_info(priv->dev, SEND_VERIFY_MPAKCET_FMT,
+				    *lo_state, *lp_state);
+			stmmac_fpe_send_mpacket(priv, priv->ioaddr,
+						MPACKET_VERIFY);
+		}
+		/* Sleep then retry */
+		msleep(500);
+	}
+
+	clear_bit(__FPE_TASK_SCHED, &priv->fpe_task_state);
+}
+
+void stmmac_fpe_handshake(struct stmmac_priv *priv, bool enable)
+{
+	if (priv->plat->fpe_cfg->hs_enable != enable) {
+		if (enable) {
+			stmmac_fpe_send_mpacket(priv, priv->ioaddr,
+						MPACKET_VERIFY);
+		} else {
+			priv->plat->fpe_cfg->lo_fpe_state = FPE_STATE_OFF;
+			priv->plat->fpe_cfg->lp_fpe_state = FPE_STATE_OFF;
+		}
+
+		priv->plat->fpe_cfg->hs_enable = enable;
+	}
+}
+
+/**
+ * stmmac_dvr_probe
+ * @device: device pointer
+ * @plat_dat: platform data pointer
+ * @res: stmmac resource pointer
+ * Description: this is the main probe function used to
+ * call the alloc_etherdev, allocate the priv structure.
+ * Return:
+ * returns 0 on success, otherwise errno.
+ */
+int stmmac_dvr_probe(struct device *device,
+		     struct plat_stmmacenet_data *plat_dat,
+		     struct stmmac_resources *res)
+{
+	struct net_device *ndev = NULL;
+	struct stmmac_priv *priv;
+	u32 rxq;
+	int i, ret = 0;
+
+	ndev = devm_alloc_etherdev_mqs(device, sizeof(struct stmmac_priv),
+				       MTL_MAX_TX_QUEUES, MTL_MAX_RX_QUEUES);
+	if (!ndev)
+		return -ENOMEM;
+
+	SET_NETDEV_DEV(ndev, device);
+
+	priv = netdev_priv(ndev);
+	priv->device = device;
+	priv->dev = ndev;
+
+	stmmac_set_ethtool_ops(ndev);
+	priv->pause = pause;
+	priv->plat = plat_dat;
+	priv->ioaddr = res->addr;
+	priv->dev->base_addr = (unsigned long)res->addr;
+	priv->plat->dma_cfg->multi_msi_en = priv->plat->multi_msi_en;
+
+	priv->dev->irq = res->irq;
+	priv->wol_irq = res->wol_irq;
+	priv->lpi_irq = res->lpi_irq;
+	priv->sfty_ce_irq = res->sfty_ce_irq;
+	priv->sfty_ue_irq = res->sfty_ue_irq;
+	for (i = 0; i < MTL_MAX_RX_QUEUES; i++)
+		priv->rx_irq[i] = res->rx_irq[i];
+	for (i = 0; i < MTL_MAX_TX_QUEUES; i++)
+		priv->tx_irq[i] = res->tx_irq[i];
+
+	if (!is_zero_ether_addr(res->mac))
+		eth_hw_addr_set(priv->dev, res->mac);
+
+	dev_set_drvdata(device, priv->dev);
+
+	/* Verify driver arguments */
+	stmmac_verify_args();
+
+	priv->af_xdp_zc_qps = bitmap_zalloc(MTL_MAX_TX_QUEUES, GFP_KERNEL);
+	if (!priv->af_xdp_zc_qps)
+		return -ENOMEM;
+
+	/* Allocate workqueue */
+	priv->wq = create_singlethread_workqueue("stmmac_wq");
+	if (!priv->wq) {
+		dev_err(priv->device, "failed to create workqueue\n");
+		return -ENOMEM;
+	}
+
+	INIT_WORK(&priv->service_task, stmmac_service_task);
+
+	/* Initialize Link Partner FPE workqueue */
+	INIT_WORK(&priv->fpe_task, stmmac_fpe_lp_task);
+
+	/* Override with kernel parameters if supplied XXX CRS XXX
+	 * this needs to have multiple instances
+	 */
+	if ((phyaddr >= 0) && (phyaddr <= 31))
+		priv->plat->phy_addr = phyaddr;
+
+	if (priv->plat->stmmac_rst) {
+		ret = reset_control_assert(priv->plat->stmmac_rst);
+		reset_control_deassert(priv->plat->stmmac_rst);
+		/* Some reset controllers have only reset callback instead of
+		 * assert + deassert callbacks pair.
+		 */
+		if (ret == -ENOTSUPP)
+			reset_control_reset(priv->plat->stmmac_rst);
+	}
+
+	ret = reset_control_deassert(priv->plat->stmmac_ahb_rst);
+	if (ret == -ENOTSUPP)
+		dev_err(priv->device, "unable to bring out of ahb reset: %pe\n",
+			ERR_PTR(ret));
+
+	/* Init MAC and get the capabilities */
+	ret = stmmac_hw_init(priv);
+	if (ret)
+		goto error_hw_init;
+
+	/* Only DWMAC core version 5.20 onwards supports HW descriptor prefetch.
+	 */
+	if (priv->synopsys_id < DWMAC_CORE_5_20)
+		priv->plat->dma_cfg->dche = false;
+
+	stmmac_check_ether_addr(priv);
+
+	ndev->netdev_ops = &stmmac_netdev_ops;
+
+	ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+			    NETIF_F_RXCSUM;
+
+	ret = stmmac_tc_init(priv, priv);
+	if (!ret) {
+		ndev->hw_features |= NETIF_F_HW_TC;
+	}
+
+	if ((priv->plat->tso_en) && (priv->dma_cap.tsoen)) {
+		ndev->hw_features |= NETIF_F_TSO | NETIF_F_TSO6;
+		if (priv->plat->has_gmac4)
+			ndev->hw_features |= NETIF_F_GSO_UDP_L4;
+		priv->tso = true;
+		dev_info(priv->device, "TSO feature enabled\n");
+	}
+
+	if (priv->dma_cap.sphen) {
+		ndev->hw_features |= NETIF_F_GRO;
+		priv->sph_cap = true;
+		priv->sph = priv->sph_cap;
+		dev_info(priv->device, "SPH feature enabled\n");
+	}
+
+	/* The current IP register MAC_HW_Feature1[ADDR64] only define
+	 * 32/40/64 bit width, but some SOC support others like i.MX8MP
+	 * support 34 bits but it map to 40 bits width in MAC_HW_Feature1[ADDR64].
+	 * So overwrite dma_cap.addr64 according to HW real design.
+	 */
+	if (priv->plat->addr64)
+		priv->dma_cap.addr64 = priv->plat->addr64;
+
+	if (priv->dma_cap.addr64) {
+		ret = dma_set_mask_and_coherent(device,
+				DMA_BIT_MASK(priv->dma_cap.addr64));
+		if (!ret) {
+			dev_info(priv->device, "Using %d bits DMA width\n",
+				 priv->dma_cap.addr64);
+
+			/*
+			 * If more than 32 bits can be addressed, make sure to
+			 * enable enhanced addressing mode.
+			 */
+			if (IS_ENABLED(CONFIG_ARCH_DMA_ADDR_T_64BIT))
+				priv->plat->dma_cfg->eame = true;
+		} else {
+			ret = dma_set_mask_and_coherent(device, DMA_BIT_MASK(32));
+			if (ret) {
+				dev_err(priv->device, "Failed to set DMA Mask\n");
+				goto error_hw_init;
+			}
+
+			priv->dma_cap.addr64 = 32;
+		}
+	}
+
+	ndev->features |= ndev->hw_features | NETIF_F_HIGHDMA;
+	ndev->watchdog_timeo = msecs_to_jiffies(watchdog);
+#ifdef STMMAC_VLAN_TAG_USED
+	/* Both mac100 and gmac support receive VLAN tag detection */
+	ndev->features |= NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_STAG_RX;
+	if (priv->dma_cap.vlhash) {
+		ndev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
+		ndev->features |= NETIF_F_HW_VLAN_STAG_FILTER;
+	}
+	if (priv->dma_cap.vlins) {
+		ndev->features |= NETIF_F_HW_VLAN_CTAG_TX;
+		if (priv->dma_cap.dvlan)
+			ndev->features |= NETIF_F_HW_VLAN_STAG_TX;
+	}
+#endif
+	priv->msg_enable = netif_msg_init(debug, default_msg_level);
+
+	/* Initialize RSS */
+	rxq = priv->plat->rx_queues_to_use;
+	netdev_rss_key_fill(priv->rss.key, sizeof(priv->rss.key));
+	for (i = 0; i < ARRAY_SIZE(priv->rss.table); i++)
+		priv->rss.table[i] = ethtool_rxfh_indir_default(i, rxq);
+
+	if (priv->dma_cap.rssen && priv->plat->rss_en)
+		ndev->features |= NETIF_F_RXHASH;
+
+	/* MTU range: 46 - hw-specific max */
+	ndev->min_mtu = ETH_ZLEN - ETH_HLEN;
+	if (priv->plat->has_xgmac)
+		ndev->max_mtu = XGMAC_JUMBO_LEN;
+	else if ((priv->plat->enh_desc) || (priv->synopsys_id >= DWMAC_CORE_4_00))
+		ndev->max_mtu = JUMBO_LEN;
+	else
+		ndev->max_mtu = SKB_MAX_HEAD(NET_SKB_PAD + NET_IP_ALIGN);
+	/* Will not overwrite ndev->max_mtu if plat->maxmtu > ndev->max_mtu
+	 * as well as plat->maxmtu < ndev->min_mtu which is a invalid range.
+	 */
+	if ((priv->plat->maxmtu < ndev->max_mtu) &&
+	    (priv->plat->maxmtu >= ndev->min_mtu))
+		ndev->max_mtu = priv->plat->maxmtu;
+	else if (priv->plat->maxmtu < ndev->min_mtu)
+		dev_warn(priv->device,
+			 "%s: warning: maxmtu having invalid value (%d)\n",
+			 __func__, priv->plat->maxmtu);
+
+	if (flow_ctrl)
+		priv->flow_ctrl = FLOW_AUTO;	/* RX/TX pause on */
+
+	/* Setup channels NAPI */
+	stmmac_napi_add(ndev);
+
+	mutex_init(&priv->lock);
+
+	/* If a specific clk_csr value is passed from the platform
+	 * this means that the CSR Clock Range selection cannot be
+	 * changed at run-time and it is fixed. Viceversa the driver'll try to
+	 * set the MDC clock dynamically according to the csr actual
+	 * clock input.
+	 */
+	if (priv->plat->clk_csr >= 0)
+		priv->clk_csr = priv->plat->clk_csr;
+	else
+		stmmac_clk_csr_set(priv);
+
+	stmmac_check_pcs_mode(priv);
+
+	pm_runtime_get_noresume(device);
+	pm_runtime_set_active(device);
+	if (!pm_runtime_enabled(device))
+		pm_runtime_enable(device);
+	/*
+	 * Prevent runtime pm from being ON by default. Users can enable
+	 * it using power/control in sysfs.
+	 */
+	pm_runtime_forbid(device);
+
+	if (priv->hw->pcs != STMMAC_PCS_TBI &&
+	    priv->hw->pcs != STMMAC_PCS_RTBI) {
+		/* MDIO bus Registration */
+		ret = stmmac_mdio_register(ndev);
+		if (ret < 0) {
+			dev_err(priv->device,
+				"%s: MDIO bus (id: %d) registration failed",
+				__func__, priv->plat->bus_id);
+			goto error_mdio_register;
+		}
+	}
+
+	if (priv->plat->speed_mode_2500)
+		priv->plat->speed_mode_2500(ndev, priv->plat->bsp_priv);
+
+	if (priv->plat->mdio_bus_data && priv->plat->mdio_bus_data->has_xpcs) {
+		ret = stmmac_xpcs_setup(priv->mii);
+		if (ret)
+			goto error_xpcs_setup;
+	}
+
+	ret = stmmac_phy_setup(priv);
+	if (ret) {
+		netdev_err(ndev, "failed to setup phy (%d)\n", ret);
+		goto error_phy_setup;
+	}
+
+	ret = register_netdev(ndev);
+	if (ret) {
+		dev_err(priv->device, "%s: ERROR %i registering the device\n",
+			__func__, ret);
+		goto error_netdev_register;
+	}
+
+	if (priv->plat->serdes_powerup) {
+		ret = priv->plat->serdes_powerup(ndev,
+						 priv->plat->bsp_priv);
+
+		if (ret < 0)
+			goto error_serdes_powerup;
+	}
+
+#ifdef CONFIG_DEBUG_FS
+	stmmac_init_fs(ndev);
+#endif
+
+	if (priv->plat->dump_debug_regs)
+		priv->plat->dump_debug_regs(priv->plat->bsp_priv);
+
+	/* Let pm_runtime_put() disable the clocks.
+	 * If CONFIG_PM is not enabled, the clocks will stay powered.
+	 */
+	pm_runtime_put(device);
+
+	return ret;
+
+error_serdes_powerup:
+	unregister_netdev(ndev);
+error_netdev_register:
+	phylink_destroy(priv->phylink);
+error_xpcs_setup:
+error_phy_setup:
+	if (priv->hw->pcs != STMMAC_PCS_TBI &&
+	    priv->hw->pcs != STMMAC_PCS_RTBI)
+		stmmac_mdio_unregister(ndev);
+error_mdio_register:
+	stmmac_napi_del(ndev);
+error_hw_init:
+	destroy_workqueue(priv->wq);
+	bitmap_free(priv->af_xdp_zc_qps);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(stmmac_dvr_probe);
+
+/**
+ * stmmac_dvr_remove
+ * @dev: device pointer
+ * Description: this function resets the TX/RX processes, disables the MAC RX/TX
+ * changes the link status, releases the DMA descriptor rings.
+ */
+int stmmac_dvr_remove(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+	struct stmmac_priv *priv = netdev_priv(ndev);
+
+	netdev_info(priv->dev, "%s: removing driver", __func__);
+
+	stmmac_stop_all_dma(priv);
+	stmmac_mac_set(priv, priv->ioaddr, false);
+	netif_carrier_off(ndev);
+	unregister_netdev(ndev);
+
+	/* Serdes power down needs to happen after VLAN filter
+	 * is deleted that is triggered by unregister_netdev().
+	 */
+	if (priv->plat->serdes_powerdown)
+		priv->plat->serdes_powerdown(ndev, priv->plat->bsp_priv);
+
+#ifdef CONFIG_DEBUG_FS
+	stmmac_exit_fs(ndev);
+#endif
+	phylink_destroy(priv->phylink);
+	if (priv->plat->stmmac_rst)
+		reset_control_assert(priv->plat->stmmac_rst);
+	reset_control_assert(priv->plat->stmmac_ahb_rst);
+	pm_runtime_put(dev);
+	pm_runtime_disable(dev);
+	if (priv->hw->pcs != STMMAC_PCS_TBI &&
+	    priv->hw->pcs != STMMAC_PCS_RTBI)
+		stmmac_mdio_unregister(ndev);
+	destroy_workqueue(priv->wq);
+	mutex_destroy(&priv->lock);
+	bitmap_free(priv->af_xdp_zc_qps);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(stmmac_dvr_remove);
+
+/**
+ * stmmac_suspend - suspend callback
+ * @dev: device pointer
+ * Description: this is the function to suspend the device and it is called
+ * by the platform driver to stop the network queue, release the resources,
+ * program the PMT register (for WoL), clean and release driver resources.
+ */
+int stmmac_suspend(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+	struct stmmac_priv *priv = netdev_priv(ndev);
+	u32 chan;
+
+	if (!ndev || !netif_running(ndev))
+		return 0;
+
+	mutex_lock(&priv->lock);
+
+	netif_device_detach(ndev);
+
+	stmmac_disable_all_queues(priv);
+
+	for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++)
+		hrtimer_cancel(&priv->tx_queue[chan].txtimer);
+
+	if (priv->eee_enabled) {
+		priv->tx_path_in_lpi_mode = false;
+		del_timer_sync(&priv->eee_ctrl_timer);
+	}
+
+	/* Stop TX/RX DMA */
+	stmmac_stop_all_dma(priv);
+
+	if (priv->plat->serdes_powerdown)
+		priv->plat->serdes_powerdown(ndev, priv->plat->bsp_priv);
+
+	/* Enable Power down mode by programming the PMT regs */
+	if (device_may_wakeup(priv->device) && priv->plat->pmt) {
+		stmmac_pmt(priv, priv->hw, priv->wolopts);
+		priv->irq_wake = 1;
+	} else {
+		stmmac_mac_set(priv, priv->ioaddr, false);
+		pinctrl_pm_select_sleep_state(priv->device);
+	}
+
+	mutex_unlock(&priv->lock);
+
+	rtnl_lock();
+	if (device_may_wakeup(priv->device) && priv->plat->pmt) {
+		phylink_suspend(priv->phylink, true);
+	} else {
+		if (device_may_wakeup(priv->device))
+			phylink_speed_down(priv->phylink, false);
+		phylink_suspend(priv->phylink, false);
+	}
+	rtnl_unlock();
+
+	if (priv->dma_cap.fpesel) {
+		/* Disable FPE */
+		stmmac_fpe_configure(priv, priv->ioaddr,
+				     priv->plat->tx_queues_to_use,
+				     priv->plat->rx_queues_to_use, false);
+
+		stmmac_fpe_handshake(priv, false);
+		stmmac_fpe_stop_wq(priv);
+	}
+
+	priv->speed = SPEED_UNKNOWN;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(stmmac_suspend);
+
+/**
+ * stmmac_reset_queues_param - reset queue parameters
+ * @priv: device pointer
+ */
+static void stmmac_reset_queues_param(struct stmmac_priv *priv)
+{
+	u32 rx_cnt = priv->plat->rx_queues_to_use;
+	u32 tx_cnt = priv->plat->tx_queues_to_use;
+	u32 queue;
+
+	for (queue = 0; queue < rx_cnt; queue++) {
+		struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
+
+		rx_q->cur_rx = 0;
+		rx_q->dirty_rx = 0;
+	}
+
+	for (queue = 0; queue < tx_cnt; queue++) {
+		struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
+
+		tx_q->cur_tx = 0;
+		tx_q->dirty_tx = 0;
+		tx_q->mss = 0;
+
+		netdev_tx_reset_queue(netdev_get_tx_queue(priv->dev, queue));
+	}
+}
+
+/**
+ * stmmac_resume - resume callback
+ * @dev: device pointer
+ * Description: when resume this function is invoked to setup the DMA and CORE
+ * in a usable state.
+ */
+int stmmac_resume(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+	struct stmmac_priv *priv = netdev_priv(ndev);
+	int ret;
+
+	if (!netif_running(ndev))
+		return 0;
+
+	/* Power Down bit, into the PM register, is cleared
+	 * automatically as soon as a magic packet or a Wake-up frame
+	 * is received. Anyway, it's better to manually clear
+	 * this bit because it can generate problems while resuming
+	 * from another devices (e.g. serial console).
+	 */
+	if (device_may_wakeup(priv->device) && priv->plat->pmt) {
+		mutex_lock(&priv->lock);
+		stmmac_pmt(priv, priv->hw, 0);
+		mutex_unlock(&priv->lock);
+		priv->irq_wake = 0;
+	} else {
+		pinctrl_pm_select_default_state(priv->device);
+		/* reset the phy so that it's ready */
+		if (priv->mii)
+			stmmac_mdio_reset(priv->mii);
+	}
+
+	if (priv->plat->serdes_powerup) {
+		ret = priv->plat->serdes_powerup(ndev,
+						 priv->plat->bsp_priv);
+
+		if (ret < 0)
+			return ret;
+	}
+
+	rtnl_lock();
+	if (device_may_wakeup(priv->device) && priv->plat->pmt) {
+		phylink_resume(priv->phylink);
+	} else {
+		phylink_resume(priv->phylink);
+		if (device_may_wakeup(priv->device))
+			phylink_speed_up(priv->phylink);
+	}
+	rtnl_unlock();
+
+	rtnl_lock();
+	mutex_lock(&priv->lock);
+
+	stmmac_reset_queues_param(priv);
+
+	stmmac_free_tx_skbufs(priv);
+	stmmac_clear_descriptors(priv);
+
+	stmmac_hw_setup(ndev, false);
+	stmmac_init_coalesce(priv);
+	stmmac_set_rx_mode(ndev);
+
+	stmmac_restore_hw_vlan_rx_fltr(priv, ndev, priv->hw);
+
+	stmmac_enable_all_queues(priv);
+
+	mutex_unlock(&priv->lock);
+	rtnl_unlock();
+
+	netif_device_attach(ndev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(stmmac_resume);
+
+#ifndef MODULE
+static int __init stmmac_cmdline_opt(char *str)
+{
+	char *opt;
+
+	if (!str || !*str)
+		return -EINVAL;
+	while ((opt = strsep(&str, ",")) != NULL) {
+		if (!strncmp(opt, "debug:", 6)) {
+			if (kstrtoint(opt + 6, 0, &debug))
+				goto err;
+		} else if (!strncmp(opt, "phyaddr:", 8)) {
+			if (kstrtoint(opt + 8, 0, &phyaddr))
+				goto err;
+		} else if (!strncmp(opt, "buf_sz:", 7)) {
+			if (kstrtoint(opt + 7, 0, &buf_sz))
+				goto err;
+		} else if (!strncmp(opt, "tc:", 3)) {
+			if (kstrtoint(opt + 3, 0, &tc))
+				goto err;
+		} else if (!strncmp(opt, "watchdog:", 9)) {
+			if (kstrtoint(opt + 9, 0, &watchdog))
+				goto err;
+		} else if (!strncmp(opt, "flow_ctrl:", 10)) {
+			if (kstrtoint(opt + 10, 0, &flow_ctrl))
+				goto err;
+		} else if (!strncmp(opt, "pause:", 6)) {
+			if (kstrtoint(opt + 6, 0, &pause))
+				goto err;
+		} else if (!strncmp(opt, "eee_timer:", 10)) {
+			if (kstrtoint(opt + 10, 0, &eee_timer))
+				goto err;
+		} else if (!strncmp(opt, "chain_mode:", 11)) {
+			if (kstrtoint(opt + 11, 0, &chain_mode))
+				goto err;
+		}
+	}
+	return 0;
+
+err:
+	pr_err("%s: ERROR broken module parameter conversion", __func__);
+	return -EINVAL;
+}
+
+__setup("stmmaceth=", stmmac_cmdline_opt);
+#endif /* MODULE */
+
+static int __init stmmac_init(void)
+{
+#ifdef CONFIG_DEBUG_FS
+	/* Create debugfs main directory if it doesn't exist yet */
+	if (!stmmac_fs_dir)
+		stmmac_fs_dir = debugfs_create_dir(STMMAC_RESOURCE_NAME, NULL);
+	register_netdevice_notifier(&stmmac_notifier);
+#endif
+
+	return 0;
+}
+
+static void __exit stmmac_exit(void)
+{
+#ifdef CONFIG_DEBUG_FS
+	unregister_netdevice_notifier(&stmmac_notifier);
+	debugfs_remove_recursive(stmmac_fs_dir);
+#endif
+}
+
+module_init(stmmac_init)
+module_exit(stmmac_exit)
+
+MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet device driver");
+MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
+MODULE_LICENSE("GPL");