diff options
| author | Dmitry Baryshkov <dmitry.baryshkov@linaro.org> | 2022-04-05 14:16:30 +0300 |
|---|---|---|
| committer | Dmitry Baryshkov <dmitry.baryshkov@linaro.org> | 2022-04-05 14:16:30 +0300 |
| commit | f8f6d89cb6cf0b94fc6b12450eac209a7d44098f (patch) | |
| tree | 1010403e9f70a32124470e4cdb4e835aa4b562e8 | |
| parent | 776e968792cf89df844b89957e673ef9abbfa593 (diff) | |
New rr-cache entries from ci-merge
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
38 files changed, 33698 insertions, 32 deletions
diff --git a/rr-cache/0fccdaa4fffb7ac52656a85a498e24b1cb928c83/postimage b/rr-cache/0fccdaa4fffb7ac52656a85a498e24b1cb928c83/postimage new file mode 100644 index 0000000..d8d1fab --- /dev/null +++ b/rr-cache/0fccdaa4fffb7ac52656a85a498e24b1cb928c83/postimage @@ -0,0 +1,4 @@ +obj-y += host/ + +# Endpoint MHI stack +obj-y += ep/ diff --git a/rr-cache/0fccdaa4fffb7ac52656a85a498e24b1cb928c83/preimage b/rr-cache/0fccdaa4fffb7ac52656a85a498e24b1cb928c83/preimage new file mode 100644 index 0000000..b44008e --- /dev/null +++ b/rr-cache/0fccdaa4fffb7ac52656a85a498e24b1cb928c83/preimage @@ -0,0 +1,8 @@ +# Host MHI stack +obj-y += host/ +<<<<<<< +======= + +# Endpoint MHI stack +obj-y += ep/ +>>>>>>> diff --git a/rr-cache/1117ed14a81d8bb6036ebbe32beec534a7b41f61/postimage b/rr-cache/1117ed14a81d8bb6036ebbe32beec534a7b41f61/postimage new file mode 100644 index 0000000..dfefd5e --- /dev/null +++ b/rr-cache/1117ed14a81d8bb6036ebbe32beec534a7b41f61/postimage @@ -0,0 +1,252 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_GCC_SM8150_H +#define _DT_BINDINGS_CLK_QCOM_GCC_SM8150_H + +/* GCC clocks */ +#define GCC_AGGRE_NOC_PCIE_TBU_CLK 0 +#define GCC_AGGRE_UFS_CARD_AXI_CLK 1 +#define GCC_AGGRE_UFS_CARD_AXI_HW_CTL_CLK 2 +#define GCC_AGGRE_UFS_PHY_AXI_CLK 3 +#define GCC_AGGRE_UFS_PHY_AXI_HW_CTL_CLK 4 +#define GCC_AGGRE_USB3_PRIM_AXI_CLK 5 +#define GCC_AGGRE_USB3_SEC_AXI_CLK 6 +#define GCC_BOOT_ROM_AHB_CLK 7 +#define GCC_CAMERA_AHB_CLK 8 +#define GCC_CAMERA_HF_AXI_CLK 9 +#define GCC_CAMERA_SF_AXI_CLK 10 +#define GCC_CAMERA_XO_CLK 11 +#define GCC_CFG_NOC_USB3_PRIM_AXI_CLK 12 +#define GCC_CFG_NOC_USB3_SEC_AXI_CLK 13 +#define GCC_CPUSS_AHB_CLK 14 +#define GCC_CPUSS_AHB_CLK_SRC 15 +#define GCC_CPUSS_DVM_BUS_CLK 16 +#define GCC_CPUSS_GNOC_CLK 17 +#define GCC_CPUSS_RBCPR_CLK 18 +#define GCC_DDRSS_GPU_AXI_CLK 19 +#define GCC_DISP_AHB_CLK 20 +#define GCC_DISP_HF_AXI_CLK 21 +#define GCC_DISP_SF_AXI_CLK 22 +#define GCC_DISP_XO_CLK 23 +#define GCC_EMAC_AXI_CLK 24 +#define GCC_EMAC_PTP_CLK 25 +#define GCC_EMAC_PTP_CLK_SRC 26 +#define GCC_EMAC_RGMII_CLK 27 +#define GCC_EMAC_RGMII_CLK_SRC 28 +#define GCC_EMAC_SLV_AHB_CLK 29 +#define GCC_GP1_CLK 30 +#define GCC_GP1_CLK_SRC 31 +#define GCC_GP2_CLK 32 +#define GCC_GP2_CLK_SRC 33 +#define GCC_GP3_CLK 34 +#define GCC_GP3_CLK_SRC 35 +#define GCC_GPU_CFG_AHB_CLK 36 +#define GCC_GPU_GPLL0_CLK_SRC 37 +#define GCC_GPU_GPLL0_DIV_CLK_SRC 38 +#define GCC_GPU_IREF_CLK 39 +#define GCC_GPU_MEMNOC_GFX_CLK 40 +#define GCC_GPU_SNOC_DVM_GFX_CLK 41 +#define GCC_NPU_AT_CLK 42 +#define GCC_NPU_AXI_CLK 43 +#define GCC_NPU_CFG_AHB_CLK 44 +#define GCC_NPU_GPLL0_CLK_SRC 45 +#define GCC_NPU_GPLL0_DIV_CLK_SRC 46 +#define GCC_NPU_TRIG_CLK 47 +#define GCC_PCIE0_PHY_REFGEN_CLK 48 +#define GCC_PCIE1_PHY_REFGEN_CLK 49 +#define GCC_PCIE_0_AUX_CLK 50 +#define GCC_PCIE_0_AUX_CLK_SRC 51 +#define GCC_PCIE_0_CFG_AHB_CLK 52 +#define GCC_PCIE_0_CLKREF_CLK 53 +#define GCC_PCIE_0_MSTR_AXI_CLK 54 +#define GCC_PCIE_0_PIPE_CLK 55 +#define GCC_PCIE_0_SLV_AXI_CLK 56 +#define GCC_PCIE_0_SLV_Q2A_AXI_CLK 57 +#define GCC_PCIE_1_AUX_CLK 58 +#define GCC_PCIE_1_AUX_CLK_SRC 59 +#define GCC_PCIE_1_CFG_AHB_CLK 60 +#define GCC_PCIE_1_CLKREF_CLK 61 +#define GCC_PCIE_1_MSTR_AXI_CLK 62 +#define GCC_PCIE_1_PIPE_CLK 63 +#define GCC_PCIE_1_SLV_AXI_CLK 64 +#define GCC_PCIE_1_SLV_Q2A_AXI_CLK 65 +#define GCC_PCIE_PHY_AUX_CLK 66 +#define GCC_PCIE_PHY_REFGEN_CLK_SRC 67 +#define GCC_PDM2_CLK 68 +#define GCC_PDM2_CLK_SRC 69 +#define GCC_PDM_AHB_CLK 70 +#define GCC_PDM_XO4_CLK 71 +#define GCC_PRNG_AHB_CLK 72 +#define GCC_QMIP_CAMERA_NRT_AHB_CLK 73 +#define GCC_QMIP_CAMERA_RT_AHB_CLK 74 +#define GCC_QMIP_DISP_AHB_CLK 75 +#define GCC_QMIP_VIDEO_CVP_AHB_CLK 76 +#define GCC_QMIP_VIDEO_VCODEC_AHB_CLK 77 +#define GCC_QSPI_CNOC_PERIPH_AHB_CLK 78 +#define GCC_QSPI_CORE_CLK 79 +#define GCC_QSPI_CORE_CLK_SRC 80 +#define GCC_QUPV3_WRAP0_S0_CLK 81 +#define GCC_QUPV3_WRAP0_S0_CLK_SRC 82 +#define GCC_QUPV3_WRAP0_S1_CLK 83 +#define GCC_QUPV3_WRAP0_S1_CLK_SRC 84 +#define GCC_QUPV3_WRAP0_S2_CLK 85 +#define GCC_QUPV3_WRAP0_S2_CLK_SRC 86 +#define GCC_QUPV3_WRAP0_S3_CLK 87 +#define GCC_QUPV3_WRAP0_S3_CLK_SRC 88 +#define GCC_QUPV3_WRAP0_S4_CLK 89 +#define GCC_QUPV3_WRAP0_S4_CLK_SRC 90 +#define GCC_QUPV3_WRAP0_S5_CLK 91 +#define GCC_QUPV3_WRAP0_S5_CLK_SRC 92 +#define GCC_QUPV3_WRAP0_S6_CLK 93 +#define GCC_QUPV3_WRAP0_S6_CLK_SRC 94 +#define GCC_QUPV3_WRAP0_S7_CLK 95 +#define GCC_QUPV3_WRAP0_S7_CLK_SRC 96 +#define GCC_QUPV3_WRAP1_S0_CLK 97 +#define GCC_QUPV3_WRAP1_S0_CLK_SRC 98 +#define GCC_QUPV3_WRAP1_S1_CLK 99 +#define GCC_QUPV3_WRAP1_S1_CLK_SRC 100 +#define GCC_QUPV3_WRAP1_S2_CLK 101 +#define GCC_QUPV3_WRAP1_S2_CLK_SRC 102 +#define GCC_QUPV3_WRAP1_S3_CLK 103 +#define GCC_QUPV3_WRAP1_S3_CLK_SRC 104 +#define GCC_QUPV3_WRAP1_S4_CLK 105 +#define GCC_QUPV3_WRAP1_S4_CLK_SRC 106 +#define GCC_QUPV3_WRAP1_S5_CLK 107 +#define GCC_QUPV3_WRAP1_S5_CLK_SRC 108 +#define GCC_QUPV3_WRAP2_S0_CLK 109 +#define GCC_QUPV3_WRAP2_S0_CLK_SRC 110 +#define GCC_QUPV3_WRAP2_S1_CLK 111 +#define GCC_QUPV3_WRAP2_S1_CLK_SRC 112 +#define GCC_QUPV3_WRAP2_S2_CLK 113 +#define GCC_QUPV3_WRAP2_S2_CLK_SRC 114 +#define GCC_QUPV3_WRAP2_S3_CLK 115 +#define GCC_QUPV3_WRAP2_S3_CLK_SRC 116 +#define GCC_QUPV3_WRAP2_S4_CLK 117 +#define GCC_QUPV3_WRAP2_S4_CLK_SRC 118 +#define GCC_QUPV3_WRAP2_S5_CLK 119 +#define GCC_QUPV3_WRAP2_S5_CLK_SRC 120 +#define GCC_QUPV3_WRAP_0_M_AHB_CLK 121 +#define GCC_QUPV3_WRAP_0_S_AHB_CLK 122 +#define GCC_QUPV3_WRAP_1_M_AHB_CLK 123 +#define GCC_QUPV3_WRAP_1_S_AHB_CLK 124 +#define GCC_QUPV3_WRAP_2_M_AHB_CLK 125 +#define GCC_QUPV3_WRAP_2_S_AHB_CLK 126 +#define GCC_SDCC2_AHB_CLK 127 +#define GCC_SDCC2_APPS_CLK 128 +#define GCC_SDCC2_APPS_CLK_SRC 129 +#define GCC_SDCC4_AHB_CLK 130 +#define GCC_SDCC4_APPS_CLK 131 +#define GCC_SDCC4_APPS_CLK_SRC 132 +#define GCC_SYS_NOC_CPUSS_AHB_CLK 133 +#define GCC_TSIF_AHB_CLK 134 +#define GCC_TSIF_INACTIVITY_TIMERS_CLK 135 +#define GCC_TSIF_REF_CLK 136 +#define GCC_TSIF_REF_CLK_SRC 137 +#define GCC_UFS_CARD_AHB_CLK 138 +#define GCC_UFS_CARD_AXI_CLK 139 +#define GCC_UFS_CARD_AXI_CLK_SRC 140 +#define GCC_UFS_CARD_AXI_HW_CTL_CLK 141 +#define GCC_UFS_CARD_CLKREF_CLK 142 +#define GCC_UFS_CARD_ICE_CORE_CLK 143 +#define GCC_UFS_CARD_ICE_CORE_CLK_SRC 144 +#define GCC_UFS_CARD_ICE_CORE_HW_CTL_CLK 145 +#define GCC_UFS_CARD_PHY_AUX_CLK 146 +#define GCC_UFS_CARD_PHY_AUX_CLK_SRC 147 +#define GCC_UFS_CARD_PHY_AUX_HW_CTL_CLK 148 +#define GCC_UFS_CARD_RX_SYMBOL_0_CLK 149 +#define GCC_UFS_CARD_RX_SYMBOL_1_CLK 150 +#define GCC_UFS_CARD_TX_SYMBOL_0_CLK 151 +#define GCC_UFS_CARD_UNIPRO_CORE_CLK 152 +#define GCC_UFS_CARD_UNIPRO_CORE_CLK_SRC 153 +#define GCC_UFS_CARD_UNIPRO_CORE_HW_CTL_CLK 154 +#define GCC_UFS_MEM_CLKREF_CLK 155 +#define GCC_UFS_PHY_AHB_CLK 156 +#define GCC_UFS_PHY_AXI_CLK 157 +#define GCC_UFS_PHY_AXI_CLK_SRC 158 +#define GCC_UFS_PHY_AXI_HW_CTL_CLK 159 +#define GCC_UFS_PHY_ICE_CORE_CLK 160 +#define GCC_UFS_PHY_ICE_CORE_CLK_SRC 161 +#define GCC_UFS_PHY_ICE_CORE_HW_CTL_CLK 162 +#define GCC_UFS_PHY_PHY_AUX_CLK 163 +#define GCC_UFS_PHY_PHY_AUX_CLK_SRC 164 +#define GCC_UFS_PHY_PHY_AUX_HW_CTL_CLK 165 +#define GCC_UFS_PHY_RX_SYMBOL_0_CLK 166 +#define GCC_UFS_PHY_RX_SYMBOL_1_CLK 167 +#define GCC_UFS_PHY_TX_SYMBOL_0_CLK 168 +#define GCC_UFS_PHY_UNIPRO_CORE_CLK 169 +#define GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC 170 +#define GCC_UFS_PHY_UNIPRO_CORE_HW_CTL_CLK 171 +#define GCC_USB30_PRIM_MASTER_CLK 172 +#define GCC_USB30_PRIM_MASTER_CLK_SRC 173 +#define GCC_USB30_PRIM_MOCK_UTMI_CLK 174 +#define GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC 175 +#define GCC_USB30_PRIM_SLEEP_CLK 176 +#define GCC_USB30_SEC_MASTER_CLK 177 +#define GCC_USB30_SEC_MASTER_CLK_SRC 178 +#define GCC_USB30_SEC_MOCK_UTMI_CLK 179 +#define GCC_USB30_SEC_MOCK_UTMI_CLK_SRC 180 +#define GCC_USB30_SEC_SLEEP_CLK 181 +#define GCC_USB3_PRIM_CLKREF_CLK 182 +#define GCC_USB3_PRIM_PHY_AUX_CLK 183 +#define GCC_USB3_PRIM_PHY_AUX_CLK_SRC 184 +#define GCC_USB3_PRIM_PHY_COM_AUX_CLK 185 +#define GCC_USB3_PRIM_PHY_PIPE_CLK 186 +#define GCC_USB3_SEC_CLKREF_CLK 187 +#define GCC_USB3_SEC_PHY_AUX_CLK 188 +#define GCC_USB3_SEC_PHY_AUX_CLK_SRC 189 +#define GCC_USB3_SEC_PHY_COM_AUX_CLK 190 +#define GCC_USB3_SEC_PHY_PIPE_CLK 191 +#define GCC_VIDEO_AHB_CLK 192 +#define GCC_VIDEO_AXI0_CLK 193 +#define GCC_VIDEO_AXI1_CLK 194 +#define GCC_VIDEO_AXIC_CLK 195 +#define GCC_VIDEO_XO_CLK 196 +#define GPLL0 197 +#define GPLL0_OUT_EVEN 198 +#define GPLL7 199 +#define GPLL9 200 + +/* Reset clocks */ +#define GCC_EMAC_BCR 0 +#define GCC_GPU_BCR 1 +#define GCC_MMSS_BCR 2 +#define GCC_NPU_BCR 3 +#define GCC_PCIE_0_BCR 4 +#define GCC_PCIE_0_PHY_BCR 5 +#define GCC_PCIE_1_BCR 6 +#define GCC_PCIE_1_PHY_BCR 7 +#define GCC_PCIE_PHY_BCR 8 +#define GCC_PDM_BCR 9 +#define GCC_PRNG_BCR 10 +#define GCC_QSPI_BCR 11 +#define GCC_QUPV3_WRAPPER_0_BCR 12 +#define GCC_QUPV3_WRAPPER_1_BCR 13 +#define GCC_QUPV3_WRAPPER_2_BCR 14 +#define GCC_QUSB2PHY_PRIM_BCR 15 +#define GCC_QUSB2PHY_SEC_BCR 16 +#define GCC_USB3_PHY_PRIM_BCR 17 +#define GCC_USB3_DP_PHY_PRIM_BCR 18 +#define GCC_USB3_PHY_SEC_BCR 19 +#define GCC_USB3PHY_PHY_SEC_BCR 20 +#define GCC_SDCC2_BCR 21 +#define GCC_SDCC4_BCR 22 +#define GCC_TSIF_BCR 23 +#define GCC_UFS_CARD_BCR 24 +#define GCC_UFS_PHY_BCR 25 +#define GCC_USB30_PRIM_BCR 26 +#define GCC_USB30_SEC_BCR 27 +#define GCC_USB_PHY_CFG_AHB2PHY_BCR 28 + +/* GCC GDSCRs */ +#define PCIE_0_GDSC 0 +#define PCIE_1_GDSC 1 +#define UFS_CARD_GDSC 2 +#define UFS_PHY_GDSC 3 +#define USB30_PRIM_GDSC 4 +#define USB30_SEC_GDSC 5 +#define EMAC_GDSC 6 + +#endif diff --git a/rr-cache/1117ed14a81d8bb6036ebbe32beec534a7b41f61/preimage b/rr-cache/1117ed14a81d8bb6036ebbe32beec534a7b41f61/preimage new file mode 100644 index 0000000..8b2fa28 --- /dev/null +++ b/rr-cache/1117ed14a81d8bb6036ebbe32beec534a7b41f61/preimage @@ -0,0 +1,257 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_GCC_SM8150_H +#define _DT_BINDINGS_CLK_QCOM_GCC_SM8150_H + +/* GCC clocks */ +#define GCC_AGGRE_NOC_PCIE_TBU_CLK 0 +#define GCC_AGGRE_UFS_CARD_AXI_CLK 1 +#define GCC_AGGRE_UFS_CARD_AXI_HW_CTL_CLK 2 +#define GCC_AGGRE_UFS_PHY_AXI_CLK 3 +#define GCC_AGGRE_UFS_PHY_AXI_HW_CTL_CLK 4 +#define GCC_AGGRE_USB3_PRIM_AXI_CLK 5 +#define GCC_AGGRE_USB3_SEC_AXI_CLK 6 +#define GCC_BOOT_ROM_AHB_CLK 7 +#define GCC_CAMERA_AHB_CLK 8 +#define GCC_CAMERA_HF_AXI_CLK 9 +#define GCC_CAMERA_SF_AXI_CLK 10 +#define GCC_CAMERA_XO_CLK 11 +#define GCC_CFG_NOC_USB3_PRIM_AXI_CLK 12 +#define GCC_CFG_NOC_USB3_SEC_AXI_CLK 13 +#define GCC_CPUSS_AHB_CLK 14 +#define GCC_CPUSS_AHB_CLK_SRC 15 +#define GCC_CPUSS_DVM_BUS_CLK 16 +#define GCC_CPUSS_GNOC_CLK 17 +#define GCC_CPUSS_RBCPR_CLK 18 +#define GCC_DDRSS_GPU_AXI_CLK 19 +#define GCC_DISP_AHB_CLK 20 +#define GCC_DISP_HF_AXI_CLK 21 +#define GCC_DISP_SF_AXI_CLK 22 +#define GCC_DISP_XO_CLK 23 +#define GCC_EMAC_AXI_CLK 24 +#define GCC_EMAC_PTP_CLK 25 +#define GCC_EMAC_PTP_CLK_SRC 26 +#define GCC_EMAC_RGMII_CLK 27 +#define GCC_EMAC_RGMII_CLK_SRC 28 +#define GCC_EMAC_SLV_AHB_CLK 29 +#define GCC_GP1_CLK 30 +#define GCC_GP1_CLK_SRC 31 +#define GCC_GP2_CLK 32 +#define GCC_GP2_CLK_SRC 33 +#define GCC_GP3_CLK 34 +#define GCC_GP3_CLK_SRC 35 +#define GCC_GPU_CFG_AHB_CLK 36 +#define GCC_GPU_GPLL0_CLK_SRC 37 +#define GCC_GPU_GPLL0_DIV_CLK_SRC 38 +#define GCC_GPU_IREF_CLK 39 +#define GCC_GPU_MEMNOC_GFX_CLK 40 +#define GCC_GPU_SNOC_DVM_GFX_CLK 41 +#define GCC_NPU_AT_CLK 42 +#define GCC_NPU_AXI_CLK 43 +#define GCC_NPU_CFG_AHB_CLK 44 +#define GCC_NPU_GPLL0_CLK_SRC 45 +#define GCC_NPU_GPLL0_DIV_CLK_SRC 46 +#define GCC_NPU_TRIG_CLK 47 +#define GCC_PCIE0_PHY_REFGEN_CLK 48 +#define GCC_PCIE1_PHY_REFGEN_CLK 49 +#define GCC_PCIE_0_AUX_CLK 50 +#define GCC_PCIE_0_AUX_CLK_SRC 51 +#define GCC_PCIE_0_CFG_AHB_CLK 52 +#define GCC_PCIE_0_CLKREF_CLK 53 +#define GCC_PCIE_0_MSTR_AXI_CLK 54 +#define GCC_PCIE_0_PIPE_CLK 55 +#define GCC_PCIE_0_SLV_AXI_CLK 56 +#define GCC_PCIE_0_SLV_Q2A_AXI_CLK 57 +#define GCC_PCIE_1_AUX_CLK 58 +#define GCC_PCIE_1_AUX_CLK_SRC 59 +#define GCC_PCIE_1_CFG_AHB_CLK 60 +#define GCC_PCIE_1_CLKREF_CLK 61 +#define GCC_PCIE_1_MSTR_AXI_CLK 62 +#define GCC_PCIE_1_PIPE_CLK 63 +#define GCC_PCIE_1_SLV_AXI_CLK 64 +#define GCC_PCIE_1_SLV_Q2A_AXI_CLK 65 +#define GCC_PCIE_PHY_AUX_CLK 66 +#define GCC_PCIE_PHY_REFGEN_CLK_SRC 67 +#define GCC_PDM2_CLK 68 +#define GCC_PDM2_CLK_SRC 69 +#define GCC_PDM_AHB_CLK 70 +#define GCC_PDM_XO4_CLK 71 +#define GCC_PRNG_AHB_CLK 72 +#define GCC_QMIP_CAMERA_NRT_AHB_CLK 73 +#define GCC_QMIP_CAMERA_RT_AHB_CLK 74 +#define GCC_QMIP_DISP_AHB_CLK 75 +#define GCC_QMIP_VIDEO_CVP_AHB_CLK 76 +#define GCC_QMIP_VIDEO_VCODEC_AHB_CLK 77 +#define GCC_QSPI_CNOC_PERIPH_AHB_CLK 78 +#define GCC_QSPI_CORE_CLK 79 +#define GCC_QSPI_CORE_CLK_SRC 80 +#define GCC_QUPV3_WRAP0_S0_CLK 81 +#define GCC_QUPV3_WRAP0_S0_CLK_SRC 82 +#define GCC_QUPV3_WRAP0_S1_CLK 83 +#define GCC_QUPV3_WRAP0_S1_CLK_SRC 84 +#define GCC_QUPV3_WRAP0_S2_CLK 85 +#define GCC_QUPV3_WRAP0_S2_CLK_SRC 86 +#define GCC_QUPV3_WRAP0_S3_CLK 87 +#define GCC_QUPV3_WRAP0_S3_CLK_SRC 88 +#define GCC_QUPV3_WRAP0_S4_CLK 89 +#define GCC_QUPV3_WRAP0_S4_CLK_SRC 90 +#define GCC_QUPV3_WRAP0_S5_CLK 91 +#define GCC_QUPV3_WRAP0_S5_CLK_SRC 92 +#define GCC_QUPV3_WRAP0_S6_CLK 93 +#define GCC_QUPV3_WRAP0_S6_CLK_SRC 94 +#define GCC_QUPV3_WRAP0_S7_CLK 95 +#define GCC_QUPV3_WRAP0_S7_CLK_SRC 96 +#define GCC_QUPV3_WRAP1_S0_CLK 97 +#define GCC_QUPV3_WRAP1_S0_CLK_SRC 98 +#define GCC_QUPV3_WRAP1_S1_CLK 99 +#define GCC_QUPV3_WRAP1_S1_CLK_SRC 100 +#define GCC_QUPV3_WRAP1_S2_CLK 101 +#define GCC_QUPV3_WRAP1_S2_CLK_SRC 102 +#define GCC_QUPV3_WRAP1_S3_CLK 103 +#define GCC_QUPV3_WRAP1_S3_CLK_SRC 104 +#define GCC_QUPV3_WRAP1_S4_CLK 105 +#define GCC_QUPV3_WRAP1_S4_CLK_SRC 106 +#define GCC_QUPV3_WRAP1_S5_CLK 107 +#define GCC_QUPV3_WRAP1_S5_CLK_SRC 108 +#define GCC_QUPV3_WRAP2_S0_CLK 109 +#define GCC_QUPV3_WRAP2_S0_CLK_SRC 110 +#define GCC_QUPV3_WRAP2_S1_CLK 111 +#define GCC_QUPV3_WRAP2_S1_CLK_SRC 112 +#define GCC_QUPV3_WRAP2_S2_CLK 113 +#define GCC_QUPV3_WRAP2_S2_CLK_SRC 114 +#define GCC_QUPV3_WRAP2_S3_CLK 115 +#define GCC_QUPV3_WRAP2_S3_CLK_SRC 116 +#define GCC_QUPV3_WRAP2_S4_CLK 117 +#define GCC_QUPV3_WRAP2_S4_CLK_SRC 118 +#define GCC_QUPV3_WRAP2_S5_CLK 119 +#define GCC_QUPV3_WRAP2_S5_CLK_SRC 120 +#define GCC_QUPV3_WRAP_0_M_AHB_CLK 121 +#define GCC_QUPV3_WRAP_0_S_AHB_CLK 122 +#define GCC_QUPV3_WRAP_1_M_AHB_CLK 123 +#define GCC_QUPV3_WRAP_1_S_AHB_CLK 124 +#define GCC_QUPV3_WRAP_2_M_AHB_CLK 125 +#define GCC_QUPV3_WRAP_2_S_AHB_CLK 126 +#define GCC_SDCC2_AHB_CLK 127 +#define GCC_SDCC2_APPS_CLK 128 +#define GCC_SDCC2_APPS_CLK_SRC 129 +#define GCC_SDCC4_AHB_CLK 130 +#define GCC_SDCC4_APPS_CLK 131 +#define GCC_SDCC4_APPS_CLK_SRC 132 +#define GCC_SYS_NOC_CPUSS_AHB_CLK 133 +#define GCC_TSIF_AHB_CLK 134 +#define GCC_TSIF_INACTIVITY_TIMERS_CLK 135 +#define GCC_TSIF_REF_CLK 136 +#define GCC_TSIF_REF_CLK_SRC 137 +#define GCC_UFS_CARD_AHB_CLK 138 +#define GCC_UFS_CARD_AXI_CLK 139 +#define GCC_UFS_CARD_AXI_CLK_SRC 140 +#define GCC_UFS_CARD_AXI_HW_CTL_CLK 141 +#define GCC_UFS_CARD_CLKREF_CLK 142 +#define GCC_UFS_CARD_ICE_CORE_CLK 143 +#define GCC_UFS_CARD_ICE_CORE_CLK_SRC 144 +#define GCC_UFS_CARD_ICE_CORE_HW_CTL_CLK 145 +#define GCC_UFS_CARD_PHY_AUX_CLK 146 +#define GCC_UFS_CARD_PHY_AUX_CLK_SRC 147 +#define GCC_UFS_CARD_PHY_AUX_HW_CTL_CLK 148 +#define GCC_UFS_CARD_RX_SYMBOL_0_CLK 149 +#define GCC_UFS_CARD_RX_SYMBOL_1_CLK 150 +#define GCC_UFS_CARD_TX_SYMBOL_0_CLK 151 +#define GCC_UFS_CARD_UNIPRO_CORE_CLK 152 +#define GCC_UFS_CARD_UNIPRO_CORE_CLK_SRC 153 +#define GCC_UFS_CARD_UNIPRO_CORE_HW_CTL_CLK 154 +#define GCC_UFS_MEM_CLKREF_CLK 155 +#define GCC_UFS_PHY_AHB_CLK 156 +#define GCC_UFS_PHY_AXI_CLK 157 +#define GCC_UFS_PHY_AXI_CLK_SRC 158 +#define GCC_UFS_PHY_AXI_HW_CTL_CLK 159 +#define GCC_UFS_PHY_ICE_CORE_CLK 160 +#define GCC_UFS_PHY_ICE_CORE_CLK_SRC 161 +#define GCC_UFS_PHY_ICE_CORE_HW_CTL_CLK 162 +#define GCC_UFS_PHY_PHY_AUX_CLK 163 +#define GCC_UFS_PHY_PHY_AUX_CLK_SRC 164 +#define GCC_UFS_PHY_PHY_AUX_HW_CTL_CLK 165 +#define GCC_UFS_PHY_RX_SYMBOL_0_CLK 166 +#define GCC_UFS_PHY_RX_SYMBOL_1_CLK 167 +#define GCC_UFS_PHY_TX_SYMBOL_0_CLK 168 +#define GCC_UFS_PHY_UNIPRO_CORE_CLK 169 +#define GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC 170 +#define GCC_UFS_PHY_UNIPRO_CORE_HW_CTL_CLK 171 +#define GCC_USB30_PRIM_MASTER_CLK 172 +#define GCC_USB30_PRIM_MASTER_CLK_SRC 173 +#define GCC_USB30_PRIM_MOCK_UTMI_CLK 174 +#define GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC 175 +#define GCC_USB30_PRIM_SLEEP_CLK 176 +#define GCC_USB30_SEC_MASTER_CLK 177 +#define GCC_USB30_SEC_MASTER_CLK_SRC 178 +#define GCC_USB30_SEC_MOCK_UTMI_CLK 179 +#define GCC_USB30_SEC_MOCK_UTMI_CLK_SRC 180 +#define GCC_USB30_SEC_SLEEP_CLK 181 +#define GCC_USB3_PRIM_CLKREF_CLK 182 +#define GCC_USB3_PRIM_PHY_AUX_CLK 183 +#define GCC_USB3_PRIM_PHY_AUX_CLK_SRC 184 +#define GCC_USB3_PRIM_PHY_COM_AUX_CLK 185 +#define GCC_USB3_PRIM_PHY_PIPE_CLK 186 +#define GCC_USB3_SEC_CLKREF_CLK 187 +#define GCC_USB3_SEC_PHY_AUX_CLK 188 +#define GCC_USB3_SEC_PHY_AUX_CLK_SRC 189 +#define GCC_USB3_SEC_PHY_COM_AUX_CLK 190 +#define GCC_USB3_SEC_PHY_PIPE_CLK 191 +#define GCC_VIDEO_AHB_CLK 192 +#define GCC_VIDEO_AXI0_CLK 193 +#define GCC_VIDEO_AXI1_CLK 194 +#define GCC_VIDEO_AXIC_CLK 195 +#define GCC_VIDEO_XO_CLK 196 +#define GPLL0 197 +#define GPLL0_OUT_EVEN 198 +#define GPLL7 199 +#define GPLL9 200 + +/* Reset clocks */ +#define GCC_EMAC_BCR 0 +#define GCC_GPU_BCR 1 +#define GCC_MMSS_BCR 2 +#define GCC_NPU_BCR 3 +#define GCC_PCIE_0_BCR 4 +#define GCC_PCIE_0_PHY_BCR 5 +#define GCC_PCIE_1_BCR 6 +#define GCC_PCIE_1_PHY_BCR 7 +#define GCC_PCIE_PHY_BCR 8 +#define GCC_PDM_BCR 9 +#define GCC_PRNG_BCR 10 +#define GCC_QSPI_BCR 11 +#define GCC_QUPV3_WRAPPER_0_BCR 12 +#define GCC_QUPV3_WRAPPER_1_BCR 13 +#define GCC_QUPV3_WRAPPER_2_BCR 14 +#define GCC_QUSB2PHY_PRIM_BCR 15 +#define GCC_QUSB2PHY_SEC_BCR 16 +#define GCC_USB3_PHY_PRIM_BCR 17 +#define GCC_USB3_DP_PHY_PRIM_BCR 18 +#define GCC_USB3_PHY_SEC_BCR 19 +#define GCC_USB3PHY_PHY_SEC_BCR 20 +#define GCC_SDCC2_BCR 21 +#define GCC_SDCC4_BCR 22 +#define GCC_TSIF_BCR 23 +#define GCC_UFS_CARD_BCR 24 +#define GCC_UFS_PHY_BCR 25 +#define GCC_USB30_PRIM_BCR 26 +#define GCC_USB30_SEC_BCR 27 +#define GCC_USB_PHY_CFG_AHB2PHY_BCR 28 + +/* GCC GDSCRs */ +<<<<<<< +#define PCIE_0_GDSC 0 +#define PCIE_1_GDSC 1 +#define UFS_CARD_GDSC 2 +#define UFS_PHY_GDSC 3 +======= +#define UFS_CARD_GDSC 2 +#define UFS_PHY_GDSC 3 +>>>>>>> +#define USB30_PRIM_GDSC 4 +#define USB30_SEC_GDSC 5 +#define EMAC_GDSC 6 + +#endif diff --git a/rr-cache/12ae752f72667d79c351e3fdb0c576190e6c06ea/thisimage b/rr-cache/12ae752f72667d79c351e3fdb0c576190e6c06ea/thisimage new file mode 100644 index 0000000..db84269 --- /dev/null +++ b/rr-cache/12ae752f72667d79c351e3fdb0c576190e6c06ea/thisimage @@ -0,0 +1,3190 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,camcc-sm8450.h> +#include <dt-bindings/clock/qcom,gcc-sm8450.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/interconnect/qcom,sm8450.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <76800000>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 2>; + #cooling-cells = <2>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <800>; + exit-latency-us = <750>; + min-residency-us = <4090>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <600>; + exit-latency-us = <1550>; + min-residency-us = <4791>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-l3-off"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <1050>; + exit-latency-us = <2500>; + min-residency-us = <5309>; + local-timer-stop; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-power-collapse"; + arm,psci-suspend-param = <0x4100c344>; + entry-latency-us = <2700>; + exit-latency-us = <3500>; + min-residency-us = <13959>; + local-timer-stop; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm8450", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + clk_virt: interconnect@0 { + compatible = "qcom,sm8450-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect@1 { + compatible = "qcom,sm8450-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + memory@a0000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0xa0000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>; + }; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_dt_log_mem: memory@80600000 { + reg = <0x0 0x80600000 0x0 0x40000>; + no-map; + }; + + xbl_ramdump_mem: memory@80640000 { + reg = <0x0 0x80640000 0x0 0x180000>; + no-map; + }; + + xbl_sc_mem: memory@807c0000 { + reg = <0x0 0x807c0000 0x0 0x40000>; + no-map; + }; + + aop_image_mem: memory@80800000 { + reg = <0x0 0x80800000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: memory@80860000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x80860000 0x0 0x20000>; + no-map; + }; + + aop_config_mem: memory@80880000 { + reg = <0x0 0x80880000 0x0 0x20000>; + no-map; + }; + + tme_crash_dump_mem: memory@808a0000 { + reg = <0x0 0x808a0000 0x0 0x40000>; + no-map; + }; + + tme_log_mem: memory@808e0000 { + reg = <0x0 0x808e0000 0x0 0x4000>; + no-map; + }; + + uefi_log_mem: memory@808e4000 { + reg = <0x0 0x808e4000 0x0 0x10000>; + no-map; + }; + + /* secdata region can be reused by apps */ + smem: memory@80900000 { + compatible = "qcom,smem"; + reg = <0x0 0x80900000 0x0 0x200000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + cpucp_fw_mem: memory@80b00000 { + reg = <0x0 0x80b00000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap: memory@80c00000 { + reg = <0x0 0x80c00000 0x0 0x4600000>; + no-map; + }; + + camera_mem: memory@85200000 { + reg = <0x0 0x85200000 0x0 0x500000>; + no-map; + }; + + video_mem: memory@85700000 { + reg = <0x0 0x85700000 0x0 0x700000>; + no-map; + }; + + adsp_mem: memory@85e00000 { + reg = <0x0 0x85e00000 0x0 0x2100000>; + no-map; + }; + + slpi_mem: memory@88000000 { + reg = <0x0 0x88000000 0x0 0x1900000>; + no-map; + }; + + cdsp_mem: memory@89900000 { + reg = <0x0 0x89900000 0x0 0x2000000>; + no-map; + }; + + ipa_fw_mem: memory@8b900000 { + reg = <0x0 0x8b900000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@8b910000 { + reg = <0x0 0x8b910000 0x0 0xa000>; + no-map; + }; + + gpu_micro_code_mem: memory@8b91a000 { + reg = <0x0 0x8b91a000 0x0 0x2000>; + no-map; + }; + + spss_region_mem: memory@8ba00000 { + reg = <0x0 0x8ba00000 0x0 0x180000>; + no-map; + }; + + /* First part of the "SPU secure shared memory" region */ + spu_tz_shared_mem: memory@8bb80000 { + reg = <0x0 0x8bb80000 0x0 0x60000>; + no-map; + }; + + /* Second part of the "SPU secure shared memory" region */ + spu_modem_shared_mem: memory@8bbe0000 { + reg = <0x0 0x8bbe0000 0x0 0x20000>; + no-map; + }; + + mpss_mem: memory@8bc00000 { + reg = <0x0 0x8bc00000 0x0 0x13200000>; + no-map; + }; + + cvp_mem: memory@9ee00000 { + reg = <0x0 0x9ee00000 0x0 0x700000>; + no-map; + }; + + rmtfs_mem: memory@9fd00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x9fd00000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + global_sync_mem: memory@a6f00000 { + reg = <0x0 0xa6f00000 0x0 0x100000>; + no-map; + }; + + /* uefi region can be reused by APPS */ + + /* Linux kernel image is loaded at 0xa0000000 */ + + oem_vm_mem: memory@bb000000 { + reg = <0x0 0xbb000000 0x0 0x5000000>; + no-map; + }; + + mte_mem: memory@c0000000 { + reg = <0x0 0xc0000000 0x0 0x20000000>; + no-map; + }; + + qheebsp_reserved_mem: memory@e0000000 { + reg = <0x0 0xe0000000 0x0 0x600000>; + no-map; + }; + + cpusys_vm_mem: memory@e0600000 { + reg = <0x0 0xe0600000 0x0 0x400000>; + no-map; + }; + + hyp_reserved_mem: memory@e0a00000 { + reg = <0x0 0xe0a00000 0x0 0x100000>; + no-map; + }; + + trust_ui_vm_mem: memory@e0b00000 { + reg = <0x0 0xe0b00000 0x0 0x4af3000>; + no-map; + }; + + trust_ui_vm_qrtr: memory@e55f3000 { + reg = <0x0 0xe55f3000 0x0 0x9000>; + no-map; + }; + + trust_ui_vm_vblk0_ring: memory@e55fc000 { + reg = <0x0 0xe55fc000 0x0 0x4000>; + no-map; + }; + + trust_ui_vm_swiotlb: memory@e5600000 { + reg = <0x0 0xe5600000 0x0 0x100000>; + no-map; + }; + + tz_stat_mem: memory@e8800000 { + reg = <0x0 0xe8800000 0x0 0x100000>; + no-map; + }; + + tags_mem: memory@e8900000 { + reg = <0x0 0xe8900000 0x0 0x1200000>; + no-map; + }; + + qtee_mem: memory@e9b00000 { + reg = <0x0 0xe9b00000 0x0 0x500000>; + no-map; + }; + + trusted_apps_mem: memory@ea000000 { + reg = <0x0 0xea000000 0x0 0x3900000>; + no-map; + }; + + trusted_apps_ext_mem: memory@ed900000 { + reg = <0x0 0xed900000 0x0 0x3b00000>; + no-map; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + smp2p_slpi_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_slpi_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sm8450"; + reg = <0x0 0x00100000 0x0 0x1f4200>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&pcie0_lane>, + <&pcie1_lane>, + <&sleep_clk>; + clock-names = "bi_tcxo", + "pcie_0_pipe_clk", + "pcie_1_pipe_clk", + "sleep_clk"; + }; + + qupv3_id_2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + uart20: serial@894000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart20_default>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + qupv3_id_0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x009c0000 0x0 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00998000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_data_clk>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart7: serial@99c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x0099c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_data_clk>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_data_clk>; + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + config_noc: interconnect@1500000 { + compatible = "qcom,sm8450-config-noc"; + reg = <0 0x01500000 0 0x1c000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,sm8450-system-noc"; + reg = <0 0x01680000 0 0x1e200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie_noc: interconnect@16c0000 { + compatible = "qcom,sm8450-pcie-anoc"; + reg = <0 0x016c0000 0 0xe280>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm8450-aggre1-noc"; + reg = <0 0x016e0000 0 0x1c080>; + #interconnect-cells = <2>; + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm8450-aggre2-noc"; + reg = <0 0x01700000 0 0x31080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&rpmhcc RPMH_IPA_CLK>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sm8450-mmss-noc"; + reg = <0 0x01740000 0 0x1f080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sm8450-pcie0"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK_SRC>, + <&pcie0_lane>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "aggre0", + "aggre1"; + + iommus = <&apps_smmu 0x1c00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + power-domain-names = "gdsc"; + + phys = <&pcie0_lane>; + phy-names = "pciephy"; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "pci"; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy"; + reg = <0 0x01c06000 0 0x200>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_EN>, + <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie0_lane: lanes@1c06200 { + reg = <0 0x1c06e00 0 0x200>, /* tx */ + <0 0x1c07000 0 0x200>, /* rx */ + <0 0x1c06200 0 0x200>, /* pcs */ + <0 0x1c06600 0 0x200>; /* pcs_pcie */ + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + #phy-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + }; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sm8450-pcie1"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, + <&pcie1_lane>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "aggre1"; + + iommus = <&apps_smmu 0x1c80 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + power-domain-names = "gdsc"; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + perst-gpio = <&tlmm 97 GPIO_ACTIVE_LOW>; + enable-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "pci"; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0f000 { + compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy"; + reg = <0 0x01c0f000 0 0x200>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_CLKREF_EN>, + <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: lanes@1c0e000 { + reg = <0 0x1c0e000 0 0x200>, /* tx */ + <0 0x1c0e200 0 0x300>, /* rx */ + <0 0x1c0f200 0 0x200>, /* pcs */ + <0 0x1c0e800 0 0x200>, /* tx */ + <0 0x1c0ea00 0 0x300>, /* rx */ + <0 0x1c0f400 0 0xc00>; /* pcs_pcie */ + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + #phy-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8450-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_1_qmpphy: phy-wrapper@88e9000 { + compatible = "qcom,sm8450-qmp-usb3-phy"; + reg = <0 0x088e9000 0 0x200>, + <0 0x088e8000 0 0x20>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: phy@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x400>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #phy-cells = <0>; + #clock-cells = <1>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + +<<<<<<< + cci0: cci@ac15000 { + compatible = "qcom,sm8450-cci"; + reg = <0 0xac15000 0 0x1000>; + interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_0_CLK>, + <&camcc CAM_CC_CCI_0_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + pinctrl-0 = <&cci0_default &cci1_default>; + pinctrl-1 = <&cci0_sleep &cci1_sleep>; + pinctrl-names = "default", "sleep"; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + cci0_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci0_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci1: cci@ac16000 { + compatible = "qcom,sm8450-cci"; + reg = <0 0xac16000 0 0x1000>; + interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_1_CLK>, + <&camcc CAM_CC_CCI_1_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + pinctrl-0 = <&cci2_default &cci2_default>; + pinctrl-1 = <&cci3_sleep &cci3_sleep>; + pinctrl-names = "default", "sleep"; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + cci1_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci1_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + camcc: clock-controller@ade0000 { + compatible = "qcom,sm8450-camcc"; + reg = <0 0x0ade0000 0 0x20000>; + status = "disabled"; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + clock-names = "iface", + "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk"; + power-domains = <&rpmhpd SM8450_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; +======= + remoteproc_slpi: remoteproc@2400000 { + compatible = "qcom,sm8450-slpi-pas"; + reg = <0 0x02400000 0 0x4000>; + + interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8450_LCX>, + <&rpmhpd SM8450_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&slpi_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_slpi_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "slpi"; + qcom,remote-pid = <3>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0541 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0542 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0543 0x0>; + /* note: shared-cb = <4> in downstream */ + }; + }; + }; + }; + + remoteproc_adsp: remoteproc@30000000 { + compatible = "qcom,sm8450-adsp-pas"; + reg = <0 0x030000000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8450_LCX>, + <&rpmhpd SM8450_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1803 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1804 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1805 0x0>; + }; + }; + }; + }; + + remoteproc_cdsp: remoteproc@32300000 { + compatible = "qcom,sm8450-cdsp-pas"; + reg = <0 0x032300000 0 0x1400000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8450_CX>, + <&rpmhpd SM8450_MXC>; + power-domain-names = "cx", "mxc"; + + memory-region = <&cdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x2161 0x0400>, + <&apps_smmu 0x1021 0x1420>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x2162 0x0400>, + <&apps_smmu 0x1022 0x1420>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x2163 0x0400>, + <&apps_smmu 0x1023 0x1420>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x2164 0x0400>, + <&apps_smmu 0x1024 0x1420>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x2165 0x0400>, + <&apps_smmu 0x1025 0x1420>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x2166 0x0400>, + <&apps_smmu 0x1026 0x1420>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x2167 0x0400>, + <&apps_smmu 0x1027 0x1420>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x2168 0x0400>, + <&apps_smmu 0x1028 0x1420>; + }; + + /* note: secure cb9 in downstream */ + }; + }; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sm8450-mpss-pas"; + reg = <0x0 0x04080000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd 0>, + <&rpmhpd 12>; + power-domain-names = "cx", "mss"; + + memory-region = <&mpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; + label = "modem"; + qcom,remote-pid = <1>; + }; +>>>>>>> + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm8450-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; + qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>, + <94 609 31>, <125 63 1>, <126 716 12>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sm8450-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1000>, /* TM */ + <0 0x0c222000 0 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sm8450-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1000>, /* TM */ + <0 0x0c223000 0 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + spmi_bus: spmi@c42d000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x0c400000 0x0 0x00003000>, + <0x0 0x0c500000 0x0 0x00400000>, + <0x0 0x0c440000 0x0 0x00080000>, + <0x0 0x0c4c0000 0x0 0x00010000>, + <0x0 0x0c42d000 0x0 0x00010000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + qcom,bus-id = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + ipcc: mailbox@ed18000 { + compatible = "qcom,sm8450-ipcc", "qcom,ipcc"; + reg = <0 0x0ed18000 0 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8450-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 211>; + wakeup-parent = <&pdc>; + +<<<<<<< + cam_sensor_mclk0_default: cam-sensor-mclk0-default-state { + pins = "gpio100"; + function = "cam_mclk"; + drive-strength = <6>; + bias-disable; + }; + + cam_sensor_mclk0_sleep: cam-sensor-mclk0-sleep-state { + pins = "gpio100"; + function = "cam_mclk"; + drive-strength = <6>; + bias-pull-down; + }; + + cam_sensor_mclk1_default: cam-sensor-mclk1-default-state { + pins = "gpio101"; + function = "cam_mclk"; + drive-strength = <6>; + bias-disable; + }; + + cam_sensor_mclk1_sleep: cam-sensor-mclk1-sleep-state { + pins = "gpio101"; + function = "cam_mclk"; + drive-strength = <6>; + bias-pull-down; + }; + + cam_sensor_mclk2_default: cam-sensor-mclk2-default-state { + pins = "gpio102"; + function = "cam_mclk"; + drive-strength = <6>; + bias-disable; + }; + + cam_sensor_mclk2_sleep: cam-sensor-mclk2-sleep-state { + pins = "gpio102"; + function = "cam_mclk"; + drive-strength = <6>; + bias-pull-down; + }; + + cam_sensor_mclk3_default: cam-sensor-mclk3-default-state { + pins = "gpio103"; + function = "cam_mclk"; + drive-strength = <6>; + bias-disable; + }; + + cam_sensor_mclk3_sleep: cam-sensor-mclk3-sleep-state { + pins = "gpio103"; + function = "cam_mclk"; + drive-strength = <6>; + bias-pull-down; + }; + + cam_sensor_mclk4_default: cam-sensor-mclk4-default-state { + pins = "gpio104"; + function = "cam_mclk"; + drive-strength = <6>; + bias-disable; + }; + + cam_sensor_mclk4_sleep: cam-sensor-mclk4-sleep-state { + pins = "gpio104"; + function = "cam_mclk"; + drive-strength = <6>; + bias-pull-down; + }; + + cam_sensor_mclk5_default: cam-sensor-mclk5-default-state { + pins = "gpio105"; + function = "cam_mclk"; + drive-strength = <6>; + bias-disable; + }; + + cam_sensor_mclk5_sleep: cam-sensor-mclk5-sleep-state { + pins = "gpio105"; + function = "cam_mclk"; + drive-strength = <6>; + bias-pull-down; + }; + + cam_sensor_mclk6_default: cam-sensor-mclk6-default-state { + pins = "gpio106"; + function = "cam_mclk"; + drive-strength = <6>; + bias-disable; + }; + + cam_sensor_mclk6_sleep: cam-sensor-mclk6-sleep-state { + pins = "gpio106"; + function = "cam_mclk"; + drive-strength = <6>; + bias-pull-down; + }; + + cci0_default: cci0-default-state { + /* SDA, SCL */ + pins = "gpio110", "gpio111"; + function = "cci_i2c"; +======= + pcie0_default_state: pcie0-default-state { + perst { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio95"; + function = "pcie0_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio98"; + function = "pcie1_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk { + pins = "gpio20", "gpio21"; + function = "qup6"; +>>>>>>> + drive-strength = <2>; + bias-pull-up; + }; + +<<<<<<< +======= + cci0_sleep: cci0-sleep-state { + /* SDA, SCL */ + pins = "gpio110", "gpio111"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci1_default: cci1-default-state { + /* SDA, SCL */ + pins = "gpio112", "gpio113"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci1_sleep: cci1-sleep-state { + /* SDA, SCL */ + pins = "gpio112", "gpio113"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci2_default: cci2-default-state { + /* SDA, SCL */ + pins = "gpio114", "gpio115"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci2_sleep: cci2-sleep-state { + /* SDA, SCL */ + pins = "gpio114", "gpio115"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci3_default: cci3-default-state { + /* SDA, SCL */ + pins = "gpio208", "gpio209"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci3_sleep: cci3-sleep-state { + /* SDA, SCL */ + pins = "gpio208", "gpio209"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + +>>>>>>> + qup_i2c13_data_clk: qup-i2c13-data-clk { + pins = "gpio48", "gpio49"; + function = "qup13"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk { + pins = "gpio52", "gpio53"; + function = "qup14"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart7_rx: qup-uart7-rx { + pins = "gpio26"; + function = "qup7"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart7_tx: qup-uart7-tx { + pins = "gpio27"; + function = "qup7"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart20_default: qup-uart20-default { + mux { + pins = "gpio76", "gpio77", + "gpio78", "gpio79"; + function = "qup20"; + }; + }; + + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8450-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17100000 { + compatible = "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x40000>; + reg = <0x0 0x17100000 0x0 0x10000>, /* GICD */ + <0x0 0x17180000 0x0 0x200000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + gic_its: msi-controller@17140000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x0 0x17140000 0x0 0x20000>; + }; + }; + + timer@17420000 { + compatible = "arm,armv7-timer-mem"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + reg = <0x0 0x17420000 0x0 0x1000>; + clock-frequency = <19200000>; + + frame@17421000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17421000 0x0 0x1000>, + <0x0 0x17422000 0x0 0x1000>; + }; + + frame@17423000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17423000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17425000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17425000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17427000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17427000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17429000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17429000 0x0 0x1000>; + status = "disabled"; + }; + + frame@1742b000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x1742b000 0x0 0x1000>; + status = "disabled"; + }; + + frame@1742d000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x1742d000 0x0 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@17a00000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x17a00000 0x0 0x10000>, + <0x0 0x17a10000 0x0 0x10000>, + <0x0 0x17a20000 0x0 0x10000>, + <0x0 0x17a30000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2", "drv-3"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>, + <WAKE_TCS 2>, <CONTROL_TCS 0>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sm8450-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sm8450-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@17d91000 { + compatible = "qcom,sm8450-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x17d91000 0 0x1000>, + <0 0x17d92000 0 0x1000>, + <0 0x17d93000 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1", "freq-domain2"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2"; + #freq-domain-cells = <1>; + }; + + gem_noc: interconnect@19100000 { + compatible = "qcom,sm8450-gem-noc"; + reg = <0 0x19100000 0 0xbb800>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system-cache-controller@19200000 { + compatible = "qcom,sm8450-llcc"; + reg = <0 0x19200000 0 0x580000>, <0 0x19a00000 0 0x80000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sm8450-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + iommus = <&apps_smmu 0xe0 0x0>; + + interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>; + interconnect-names = "ufs-ddr", "cpu-ufs"; + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + freq-table-hz = + <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sm8450-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0xe10>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", "ref_aux", "qref"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_0_CLKREF_EN>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: lanes@1d87400 { + reg = <0 0x01d87400 0 0x108>, + <0 0x01d87600 0 0x1e0>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x108>, + <0 0x01d87a00 0 0x1e0>; + #phy-cells = <0>; + #clock-cells = <0>; + }; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm8450-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB3_0_CLKREF_EN>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep", "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", + "dm_hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + nsp_noc: interconnect@320c0000 { + compatible = "qcom,sm8450-nsp-noc"; + reg = <0 0x320c0000 0 0x10000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_ag_noc: interconnect@3c40000 { + compatible = "qcom,sm8450-lpass-ag-noc"; + reg = <0 0x3c40000 0 0x17200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + }; + + thermal-zones { + aoss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 0>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 1>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 2>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 3>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss4-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 4>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 5>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu4_emerg0: cpu4-emerg0-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 6>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu4_emerg1: cpu4-emerg1-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 7>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu5_emerg0: cpu5-emerg0-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 8>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu5_emerg1: cpu5-emerg1-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 9>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu6_emerg0: cpu6-emerg0-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 10>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu6_emerg1: cpu6-emerg1-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 11>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu7_emerg0: cpu7-emerg0-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu7-middle-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 12>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu7_emerg1: cpu7-emerg1-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 13>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu7_emerg2: cpu7-emerg2-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + gpu-top-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens0 14>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu0_tj_cfg: tj_cfg { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpu-bottom-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens0 15>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu1_tj_cfg: tj_cfg { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 0>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 1>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu0_emerg: cpu0-emerg-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 2>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu1_emerg: cpu1-emerg-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 3>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu2_emerg: cpu2-emerg-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 4>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu3_emerg: cpu3-emerg-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cdsp0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 5>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp_0_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cdsp1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 6>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp_1_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cdsp2-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 7>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp_2_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 8>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 9>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + ddr_config0: ddr0-config { + temperature = <90000>; + hysteresis = <5000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 10>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss0_config0: mdmss0-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss0_config1: mdmss0-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 11>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss1_config0: mdmss1-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss1_config1: mdmss1-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 12>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss2_config0: mdmss2-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss2_config1: mdmss2-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 13>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss3_config0: mdmss3-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss3_config1: mdmss3-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + camera0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 14>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + camera1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 15>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <19200000>; + }; +}; diff --git a/rr-cache/1b705d149a2557135d4e49428b3be5913e003aee/postimage b/rr-cache/1b705d149a2557135d4e49428b3be5913e003aee/postimage new file mode 100644 index 0000000..a985f42 --- /dev/null +++ b/rr-cache/1b705d149a2557135d4e49428b3be5913e003aee/postimage @@ -0,0 +1,2927 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-sm8450.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/interconnect/qcom,sm8450.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <76800000>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 2>; + #cooling-cells = <2>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <800>; + exit-latency-us = <750>; + min-residency-us = <4090>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <600>; + exit-latency-us = <1550>; + min-residency-us = <4791>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-l3-off"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <1050>; + exit-latency-us = <2500>; + min-residency-us = <5309>; + local-timer-stop; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-power-collapse"; + arm,psci-suspend-param = <0x4100c344>; + entry-latency-us = <2700>; + exit-latency-us = <3500>; + min-residency-us = <13959>; + local-timer-stop; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm8450", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + clk_virt: interconnect@0 { + compatible = "qcom,sm8450-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect@1 { + compatible = "qcom,sm8450-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + memory@a0000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0xa0000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>; + }; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_dt_log_mem: memory@80600000 { + reg = <0x0 0x80600000 0x0 0x40000>; + no-map; + }; + + xbl_ramdump_mem: memory@80640000 { + reg = <0x0 0x80640000 0x0 0x180000>; + no-map; + }; + + xbl_sc_mem: memory@807c0000 { + reg = <0x0 0x807c0000 0x0 0x40000>; + no-map; + }; + + aop_image_mem: memory@80800000 { + reg = <0x0 0x80800000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: memory@80860000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x80860000 0x0 0x20000>; + no-map; + }; + + aop_config_mem: memory@80880000 { + reg = <0x0 0x80880000 0x0 0x20000>; + no-map; + }; + + tme_crash_dump_mem: memory@808a0000 { + reg = <0x0 0x808a0000 0x0 0x40000>; + no-map; + }; + + tme_log_mem: memory@808e0000 { + reg = <0x0 0x808e0000 0x0 0x4000>; + no-map; + }; + + uefi_log_mem: memory@808e4000 { + reg = <0x0 0x808e4000 0x0 0x10000>; + no-map; + }; + + /* secdata region can be reused by apps */ + smem: memory@80900000 { + compatible = "qcom,smem"; + reg = <0x0 0x80900000 0x0 0x200000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + cpucp_fw_mem: memory@80b00000 { + reg = <0x0 0x80b00000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap: memory@80c00000 { + reg = <0x0 0x80c00000 0x0 0x4600000>; + no-map; + }; + + camera_mem: memory@85200000 { + reg = <0x0 0x85200000 0x0 0x500000>; + no-map; + }; + + video_mem: memory@85700000 { + reg = <0x0 0x85700000 0x0 0x700000>; + no-map; + }; + + adsp_mem: memory@85e00000 { + reg = <0x0 0x85e00000 0x0 0x2100000>; + no-map; + }; + + slpi_mem: memory@88000000 { + reg = <0x0 0x88000000 0x0 0x1900000>; + no-map; + }; + + cdsp_mem: memory@89900000 { + reg = <0x0 0x89900000 0x0 0x2000000>; + no-map; + }; + + ipa_fw_mem: memory@8b900000 { + reg = <0x0 0x8b900000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@8b910000 { + reg = <0x0 0x8b910000 0x0 0xa000>; + no-map; + }; + + gpu_micro_code_mem: memory@8b91a000 { + reg = <0x0 0x8b91a000 0x0 0x2000>; + no-map; + }; + + spss_region_mem: memory@8ba00000 { + reg = <0x0 0x8ba00000 0x0 0x180000>; + no-map; + }; + + /* First part of the "SPU secure shared memory" region */ + spu_tz_shared_mem: memory@8bb80000 { + reg = <0x0 0x8bb80000 0x0 0x60000>; + no-map; + }; + + /* Second part of the "SPU secure shared memory" region */ + spu_modem_shared_mem: memory@8bbe0000 { + reg = <0x0 0x8bbe0000 0x0 0x20000>; + no-map; + }; + + mpss_mem: memory@8bc00000 { + reg = <0x0 0x8bc00000 0x0 0x13200000>; + no-map; + }; + + cvp_mem: memory@9ee00000 { + reg = <0x0 0x9ee00000 0x0 0x700000>; + no-map; + }; + + rmtfs_mem: memory@9fd00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x9fd00000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + global_sync_mem: memory@a6f00000 { + reg = <0x0 0xa6f00000 0x0 0x100000>; + no-map; + }; + + /* uefi region can be reused by APPS */ + + /* Linux kernel image is loaded at 0xa0000000 */ + + oem_vm_mem: memory@bb000000 { + reg = <0x0 0xbb000000 0x0 0x5000000>; + no-map; + }; + + mte_mem: memory@c0000000 { + reg = <0x0 0xc0000000 0x0 0x20000000>; + no-map; + }; + + qheebsp_reserved_mem: memory@e0000000 { + reg = <0x0 0xe0000000 0x0 0x600000>; + no-map; + }; + + cpusys_vm_mem: memory@e0600000 { + reg = <0x0 0xe0600000 0x0 0x400000>; + no-map; + }; + + hyp_reserved_mem: memory@e0a00000 { + reg = <0x0 0xe0a00000 0x0 0x100000>; + no-map; + }; + + trust_ui_vm_mem: memory@e0b00000 { + reg = <0x0 0xe0b00000 0x0 0x4af3000>; + no-map; + }; + + trust_ui_vm_qrtr: memory@e55f3000 { + reg = <0x0 0xe55f3000 0x0 0x9000>; + no-map; + }; + + trust_ui_vm_vblk0_ring: memory@e55fc000 { + reg = <0x0 0xe55fc000 0x0 0x4000>; + no-map; + }; + + trust_ui_vm_swiotlb: memory@e5600000 { + reg = <0x0 0xe5600000 0x0 0x100000>; + no-map; + }; + + tz_stat_mem: memory@e8800000 { + reg = <0x0 0xe8800000 0x0 0x100000>; + no-map; + }; + + tags_mem: memory@e8900000 { + reg = <0x0 0xe8900000 0x0 0x1200000>; + no-map; + }; + + qtee_mem: memory@e9b00000 { + reg = <0x0 0xe9b00000 0x0 0x500000>; + no-map; + }; + + trusted_apps_mem: memory@ea000000 { + reg = <0x0 0xea000000 0x0 0x3900000>; + no-map; + }; + + trusted_apps_ext_mem: memory@ed900000 { + reg = <0x0 0xed900000 0x0 0x3b00000>; + no-map; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + smp2p_slpi_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_slpi_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sm8450"; + reg = <0x0 0x00100000 0x0 0x1f4200>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&pcie0_lane>, + <&pcie1_lane>, + <&sleep_clk>; + clock-names = "bi_tcxo", + "pcie_0_pipe_clk", + "pcie_1_pipe_clk", + "sleep_clk"; + }; + + qupv3_id_2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + uart20: serial@894000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart20_default>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + qupv3_id_0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x009c0000 0x0 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00998000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_data_clk>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart7: serial@99c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x0099c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_data_clk>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_data_clk>; + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + config_noc: interconnect@1500000 { + compatible = "qcom,sm8450-config-noc"; + reg = <0 0x01500000 0 0x1c000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,sm8450-system-noc"; + reg = <0 0x01680000 0 0x1e200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie_noc: interconnect@16c0000 { + compatible = "qcom,sm8450-pcie-anoc"; + reg = <0 0x016c0000 0 0xe280>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm8450-aggre1-noc"; + reg = <0 0x016e0000 0 0x1c080>; + #interconnect-cells = <2>; + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm8450-aggre2-noc"; + reg = <0 0x01700000 0 0x31080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&rpmhcc RPMH_IPA_CLK>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sm8450-mmss-noc"; + reg = <0 0x01740000 0 0x1f080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sm8450-pcie0"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK_SRC>, + <&pcie0_lane>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "aggre0", + "aggre1"; + + iommus = <&apps_smmu 0x1c00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + power-domain-names = "gdsc"; + + phys = <&pcie0_lane>; + phy-names = "pciephy"; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "pci"; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy"; + reg = <0 0x01c06000 0 0x200>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_EN>, + <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie0_lane: lanes@1c06200 { + reg = <0 0x1c06e00 0 0x200>, /* tx */ + <0 0x1c07000 0 0x200>, /* rx */ + <0 0x1c06200 0 0x200>, /* pcs */ + <0 0x1c06600 0 0x200>; /* pcs_pcie */ + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + #phy-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + }; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sm8450-pcie1"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, + <&pcie1_lane>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "aggre1"; + + iommus = <&apps_smmu 0x1c80 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + power-domain-names = "gdsc"; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + perst-gpio = <&tlmm 97 GPIO_ACTIVE_LOW>; + enable-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "pci"; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0f000 { + compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy"; + reg = <0 0x01c0f000 0 0x200>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_CLKREF_EN>, + <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: lanes@1c0e000 { + reg = <0 0x1c0e000 0 0x200>, /* tx */ + <0 0x1c0e200 0 0x300>, /* rx */ + <0 0x1c0f200 0 0x200>, /* pcs */ + <0 0x1c0e800 0 0x200>, /* tx */ + <0 0x1c0ea00 0 0x300>, /* rx */ + <0 0x1c0f400 0 0xc00>; /* pcs_pcie */ + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + #phy-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8450-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_1_qmpphy: phy-wrapper@88e9000 { + compatible = "qcom,sm8450-qmp-usb3-phy"; + reg = <0 0x088e9000 0 0x200>, + <0 0x088e8000 0 0x20>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: phy@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x400>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #phy-cells = <0>; + #clock-cells = <1>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + remoteproc_slpi: remoteproc@2400000 { + compatible = "qcom,sm8450-slpi-pas"; + reg = <0 0x02400000 0 0x4000>; + + interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8450_LCX>, + <&rpmhpd SM8450_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&slpi_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_slpi_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "slpi"; + qcom,remote-pid = <3>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0541 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0542 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0543 0x0>; + /* note: shared-cb = <4> in downstream */ + }; + }; + }; + }; + + remoteproc_adsp: remoteproc@30000000 { + compatible = "qcom,sm8450-adsp-pas"; + reg = <0 0x030000000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8450_LCX>, + <&rpmhpd SM8450_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1803 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1804 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1805 0x0>; + }; + }; + }; + }; + + remoteproc_cdsp: remoteproc@32300000 { + compatible = "qcom,sm8450-cdsp-pas"; + reg = <0 0x032300000 0 0x1400000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8450_CX>, + <&rpmhpd SM8450_MXC>; + power-domain-names = "cx", "mxc"; + + memory-region = <&cdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x2161 0x0400>, + <&apps_smmu 0x1021 0x1420>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x2162 0x0400>, + <&apps_smmu 0x1022 0x1420>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x2163 0x0400>, + <&apps_smmu 0x1023 0x1420>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x2164 0x0400>, + <&apps_smmu 0x1024 0x1420>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x2165 0x0400>, + <&apps_smmu 0x1025 0x1420>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x2166 0x0400>, + <&apps_smmu 0x1026 0x1420>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x2167 0x0400>, + <&apps_smmu 0x1027 0x1420>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x2168 0x0400>, + <&apps_smmu 0x1028 0x1420>; + }; + + /* note: secure cb9 in downstream */ + }; + }; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sm8450-mpss-pas"; + reg = <0x0 0x04080000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd 0>, + <&rpmhpd 12>; + power-domain-names = "cx", "mss"; + + memory-region = <&mpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; + label = "modem"; + qcom,remote-pid = <1>; + }; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm8450-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; + qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>, + <94 609 31>, <125 63 1>, <126 716 12>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sm8450-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1000>, /* TM */ + <0 0x0c222000 0 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sm8450-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1000>, /* TM */ + <0 0x0c223000 0 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + spmi_bus: spmi@c42d000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x0c400000 0x0 0x00003000>, + <0x0 0x0c500000 0x0 0x00400000>, + <0x0 0x0c440000 0x0 0x00080000>, + <0x0 0x0c4c0000 0x0 0x00010000>, + <0x0 0x0c42d000 0x0 0x00010000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + qcom,bus-id = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + ipcc: mailbox@ed18000 { + compatible = "qcom,sm8450-ipcc", "qcom,ipcc"; + reg = <0 0x0ed18000 0 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8450-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 211>; + wakeup-parent = <&pdc>; + + pcie0_default_state: pcie0-default-state { + perst { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio95"; + function = "pcie0_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio98"; + function = "pcie1_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk { + pins = "gpio20", "gpio21"; + function = "qup6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk { + pins = "gpio48", "gpio49"; + function = "qup13"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk { + pins = "gpio52", "gpio53"; + function = "qup14"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart7_rx: qup-uart7-rx { + pins = "gpio26"; + function = "qup7"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart7_tx: qup-uart7-tx { + pins = "gpio27"; + function = "qup7"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart20_default: qup-uart20-default { + mux { + pins = "gpio76", "gpio77", + "gpio78", "gpio79"; + function = "qup20"; + }; + }; + + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8450-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17100000 { + compatible = "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x40000>; + reg = <0x0 0x17100000 0x0 0x10000>, /* GICD */ + <0x0 0x17180000 0x0 0x200000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + gic_its: msi-controller@17140000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x0 0x17140000 0x0 0x20000>; + }; + }; + + timer@17420000 { + compatible = "arm,armv7-timer-mem"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + reg = <0x0 0x17420000 0x0 0x1000>; + clock-frequency = <19200000>; + + frame@17421000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17421000 0x0 0x1000>, + <0x0 0x17422000 0x0 0x1000>; + }; + + frame@17423000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17423000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17425000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17425000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17427000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17427000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17429000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17429000 0x0 0x1000>; + status = "disabled"; + }; + + frame@1742b000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x1742b000 0x0 0x1000>; + status = "disabled"; + }; + + frame@1742d000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x1742d000 0x0 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@17a00000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x17a00000 0x0 0x10000>, + <0x0 0x17a10000 0x0 0x10000>, + <0x0 0x17a20000 0x0 0x10000>, + <0x0 0x17a30000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2", "drv-3"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>, + <WAKE_TCS 2>, <CONTROL_TCS 0>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sm8450-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sm8450-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@17d91000 { + compatible = "qcom,sm8450-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x17d91000 0 0x1000>, + <0 0x17d92000 0 0x1000>, + <0 0x17d93000 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1", "freq-domain2"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2"; + #freq-domain-cells = <1>; + }; + + gem_noc: interconnect@19100000 { + compatible = "qcom,sm8450-gem-noc"; + reg = <0 0x19100000 0 0xbb800>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system-cache-controller@19200000 { + compatible = "qcom,sm8450-llcc"; + reg = <0 0x19200000 0 0x580000>, <0 0x19a00000 0 0x80000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sm8450-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + iommus = <&apps_smmu 0xe0 0x0>; + + interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>; + interconnect-names = "ufs-ddr", "cpu-ufs"; + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + freq-table-hz = + <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sm8450-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0xe10>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", "ref_aux", "qref"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_0_CLKREF_EN>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: lanes@1d87400 { + reg = <0 0x01d87400 0 0x108>, + <0 0x01d87600 0 0x1e0>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x108>, + <0 0x01d87a00 0 0x1e0>; + #phy-cells = <0>; + #clock-cells = <0>; + }; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm8450-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB3_0_CLKREF_EN>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep", "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", + "dm_hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + nsp_noc: interconnect@320c0000 { + compatible = "qcom,sm8450-nsp-noc"; + reg = <0 0x320c0000 0 0x10000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_ag_noc: interconnect@3c40000 { + compatible = "qcom,sm8450-lpass-ag-noc"; + reg = <0 0x3c40000 0 0x17200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + }; + + thermal-zones { + aoss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 0>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 1>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 2>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 3>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss4-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 4>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 5>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu4_emerg0: cpu4-emerg0-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 6>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu4_emerg1: cpu4-emerg1-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 7>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu5_emerg0: cpu5-emerg0-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 8>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu5_emerg1: cpu5-emerg1-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 9>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu6_emerg0: cpu6-emerg0-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 10>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu6_emerg1: cpu6-emerg1-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 11>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu7_emerg0: cpu7-emerg0-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu7-middle-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 12>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu7_emerg1: cpu7-emerg1-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 13>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu7_emerg2: cpu7-emerg2-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + gpu-top-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens0 14>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu0_tj_cfg: tj_cfg { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpu-bottom-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens0 15>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu1_tj_cfg: tj_cfg { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 0>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 1>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu0_emerg: cpu0-emerg-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 2>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu1_emerg: cpu1-emerg-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 3>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu2_emerg: cpu2-emerg-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 4>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu3_emerg: cpu3-emerg-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cdsp0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 5>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp_0_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cdsp1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 6>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp_1_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cdsp2-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 7>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp_2_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 8>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 9>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + ddr_config0: ddr0-config { + temperature = <90000>; + hysteresis = <5000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 10>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss0_config0: mdmss0-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss0_config1: mdmss0-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 11>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss1_config0: mdmss1-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss1_config1: mdmss1-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 12>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss2_config0: mdmss2-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss2_config1: mdmss2-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 13>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss3_config0: mdmss3-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss3_config1: mdmss3-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + camera0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 14>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + camera1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 15>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <19200000>; + }; +}; diff --git a/rr-cache/1b705d149a2557135d4e49428b3be5913e003aee/preimage b/rr-cache/1b705d149a2557135d4e49428b3be5913e003aee/preimage new file mode 100644 index 0000000..cab4e42 --- /dev/null +++ b/rr-cache/1b705d149a2557135d4e49428b3be5913e003aee/preimage @@ -0,0 +1,2956 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-sm8450.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/interconnect/qcom,sm8450.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <76800000>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo780"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 2>; + #cooling-cells = <2>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <800>; + exit-latency-us = <750>; + min-residency-us = <4090>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <600>; + exit-latency-us = <1550>; + min-residency-us = <4791>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-l3-off"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <1050>; + exit-latency-us = <2500>; + min-residency-us = <5309>; + local-timer-stop; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-power-collapse"; + arm,psci-suspend-param = <0x4100c344>; + entry-latency-us = <2700>; + exit-latency-us = <3500>; + min-residency-us = <13959>; + local-timer-stop; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm8450", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + clk_virt: interconnect@0 { + compatible = "qcom,sm8450-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect@1 { + compatible = "qcom,sm8450-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + memory@a0000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0xa0000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>; + }; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_dt_log_mem: memory@80600000 { + reg = <0x0 0x80600000 0x0 0x40000>; + no-map; + }; + + xbl_ramdump_mem: memory@80640000 { + reg = <0x0 0x80640000 0x0 0x180000>; + no-map; + }; + + xbl_sc_mem: memory@807c0000 { + reg = <0x0 0x807c0000 0x0 0x40000>; + no-map; + }; + + aop_image_mem: memory@80800000 { + reg = <0x0 0x80800000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: memory@80860000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x80860000 0x0 0x20000>; + no-map; + }; + + aop_config_mem: memory@80880000 { + reg = <0x0 0x80880000 0x0 0x20000>; + no-map; + }; + + tme_crash_dump_mem: memory@808a0000 { + reg = <0x0 0x808a0000 0x0 0x40000>; + no-map; + }; + + tme_log_mem: memory@808e0000 { + reg = <0x0 0x808e0000 0x0 0x4000>; + no-map; + }; + + uefi_log_mem: memory@808e4000 { + reg = <0x0 0x808e4000 0x0 0x10000>; + no-map; + }; + + /* secdata region can be reused by apps */ + smem: memory@80900000 { + compatible = "qcom,smem"; + reg = <0x0 0x80900000 0x0 0x200000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + cpucp_fw_mem: memory@80b00000 { + reg = <0x0 0x80b00000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap: memory@80c00000 { + reg = <0x0 0x80c00000 0x0 0x4600000>; + no-map; + }; + + camera_mem: memory@85200000 { + reg = <0x0 0x85200000 0x0 0x500000>; + no-map; + }; + + video_mem: memory@85700000 { + reg = <0x0 0x85700000 0x0 0x700000>; + no-map; + }; + + adsp_mem: memory@85e00000 { + reg = <0x0 0x85e00000 0x0 0x2100000>; + no-map; + }; + + slpi_mem: memory@88000000 { + reg = <0x0 0x88000000 0x0 0x1900000>; + no-map; + }; + + cdsp_mem: memory@89900000 { + reg = <0x0 0x89900000 0x0 0x2000000>; + no-map; + }; + + ipa_fw_mem: memory@8b900000 { + reg = <0x0 0x8b900000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@8b910000 { + reg = <0x0 0x8b910000 0x0 0xa000>; + no-map; + }; + + gpu_micro_code_mem: memory@8b91a000 { + reg = <0x0 0x8b91a000 0x0 0x2000>; + no-map; + }; + + spss_region_mem: memory@8ba00000 { + reg = <0x0 0x8ba00000 0x0 0x180000>; + no-map; + }; + + /* First part of the "SPU secure shared memory" region */ + spu_tz_shared_mem: memory@8bb80000 { + reg = <0x0 0x8bb80000 0x0 0x60000>; + no-map; + }; + + /* Second part of the "SPU secure shared memory" region */ + spu_modem_shared_mem: memory@8bbe0000 { + reg = <0x0 0x8bbe0000 0x0 0x20000>; + no-map; + }; + + mpss_mem: memory@8bc00000 { + reg = <0x0 0x8bc00000 0x0 0x13200000>; + no-map; + }; + + cvp_mem: memory@9ee00000 { + reg = <0x0 0x9ee00000 0x0 0x700000>; + no-map; + }; + + rmtfs_mem: memory@9fd00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x9fd00000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + global_sync_mem: memory@a6f00000 { + reg = <0x0 0xa6f00000 0x0 0x100000>; + no-map; + }; + + /* uefi region can be reused by APPS */ + + /* Linux kernel image is loaded at 0xa0000000 */ + + oem_vm_mem: memory@bb000000 { + reg = <0x0 0xbb000000 0x0 0x5000000>; + no-map; + }; + + mte_mem: memory@c0000000 { + reg = <0x0 0xc0000000 0x0 0x20000000>; + no-map; + }; + + qheebsp_reserved_mem: memory@e0000000 { + reg = <0x0 0xe0000000 0x0 0x600000>; + no-map; + }; + + cpusys_vm_mem: memory@e0600000 { + reg = <0x0 0xe0600000 0x0 0x400000>; + no-map; + }; + + hyp_reserved_mem: memory@e0a00000 { + reg = <0x0 0xe0a00000 0x0 0x100000>; + no-map; + }; + + trust_ui_vm_mem: memory@e0b00000 { + reg = <0x0 0xe0b00000 0x0 0x4af3000>; + no-map; + }; + + trust_ui_vm_qrtr: memory@e55f3000 { + reg = <0x0 0xe55f3000 0x0 0x9000>; + no-map; + }; + + trust_ui_vm_vblk0_ring: memory@e55fc000 { + reg = <0x0 0xe55fc000 0x0 0x4000>; + no-map; + }; + + trust_ui_vm_swiotlb: memory@e5600000 { + reg = <0x0 0xe5600000 0x0 0x100000>; + no-map; + }; + + tz_stat_mem: memory@e8800000 { + reg = <0x0 0xe8800000 0x0 0x100000>; + no-map; + }; + + tags_mem: memory@e8900000 { + reg = <0x0 0xe8900000 0x0 0x1200000>; + no-map; + }; + + qtee_mem: memory@e9b00000 { + reg = <0x0 0xe9b00000 0x0 0x500000>; + no-map; + }; + + trusted_apps_mem: memory@ea000000 { + reg = <0x0 0xea000000 0x0 0x3900000>; + no-map; + }; + + trusted_apps_ext_mem: memory@ed900000 { + reg = <0x0 0xed900000 0x0 0x3b00000>; + no-map; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + smp2p_slpi_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_slpi_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sm8450"; + reg = <0x0 0x00100000 0x0 0x1f4200>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&pcie0_lane>, + <&pcie1_lane>, + <&sleep_clk>; + clock-names = "bi_tcxo", + "pcie_0_pipe_clk", + "pcie_1_pipe_clk", + "sleep_clk"; + }; + + qupv3_id_2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + uart20: serial@894000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart20_default>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + qupv3_id_0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x009c0000 0x0 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00998000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_data_clk>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart7: serial@99c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x0099c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_data_clk>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_data_clk>; + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + +<<<<<<< +======= + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sm8450-pcie0"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK_SRC>, + <&pcie0_lane>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "aggre0", + "aggre1"; + + iommus = <&apps_smmu 0x1c00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + power-domain-names = "gdsc"; + + phys = <&pcie0_lane>; + phy-names = "pciephy"; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "pci"; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy"; + reg = <0 0x01c06000 0 0x200>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_EN>, + <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie0_lane: lanes@1c06200 { + reg = <0 0x1c06e00 0 0x200>, /* tx */ + <0 0x1c07000 0 0x200>, /* rx */ + <0 0x1c06200 0 0x200>, /* pcs */ + <0 0x1c06600 0 0x200>; /* pcs_pcie */ + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + #phy-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + }; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sm8450-pcie1"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, + <&pcie1_lane>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "aggre1"; + + iommus = <&apps_smmu 0x1c80 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + power-domain-names = "gdsc"; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + perst-gpio = <&tlmm 97 GPIO_ACTIVE_LOW>; + enable-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "pci"; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0f000 { + compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy"; + reg = <0 0x01c0f000 0 0x200>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_CLKREF_EN>, + <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: lanes@1c0e000 { + reg = <0 0x1c0e000 0 0x200>, /* tx */ + <0 0x1c0e200 0 0x300>, /* rx */ + <0 0x1c0f200 0 0x200>, /* pcs */ + <0 0x1c0e800 0 0x200>, /* tx */ + <0 0x1c0ea00 0 0x300>, /* rx */ + <0 0x1c0f400 0 0xc00>; /* pcs_pcie */ + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + #phy-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + }; + }; + +>>>>>>> + config_noc: interconnect@1500000 { + compatible = "qcom,sm8450-config-noc"; + reg = <0 0x01500000 0 0x1c000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,sm8450-system-noc"; + reg = <0 0x01680000 0 0x1e200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie_noc: interconnect@16c0000 { + compatible = "qcom,sm8450-pcie-anoc"; + reg = <0 0x016c0000 0 0xe280>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm8450-aggre1-noc"; + reg = <0 0x016e0000 0 0x1c080>; + #interconnect-cells = <2>; + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm8450-aggre2-noc"; + reg = <0 0x01700000 0 0x31080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&rpmhcc RPMH_IPA_CLK>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sm8450-mmss-noc"; + reg = <0 0x01740000 0 0x1f080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8450-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_1_qmpphy: phy-wrapper@88e9000 { + compatible = "qcom,sm8450-qmp-usb3-phy"; + reg = <0 0x088e9000 0 0x200>, + <0 0x088e8000 0 0x20>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: phy@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x400>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #phy-cells = <0>; + #clock-cells = <1>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + remoteproc_slpi: remoteproc@2400000 { + compatible = "qcom,sm8450-slpi-pas"; + reg = <0 0x02400000 0 0x4000>; + + interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8450_LCX>, + <&rpmhpd SM8450_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&slpi_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_slpi_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "slpi"; + qcom,remote-pid = <3>; +<<<<<<< +======= + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0541 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0542 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0543 0x0>; + /* note: shared-cb = <4> in downstream */ + }; + }; +>>>>>>> + }; + }; + + remoteproc_adsp: remoteproc@30000000 { + compatible = "qcom,sm8450-adsp-pas"; + reg = <0 0x030000000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8450_LCX>, + <&rpmhpd SM8450_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; +<<<<<<< +======= + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1803 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1804 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1805 0x0>; + }; + }; +>>>>>>> + }; + }; + + remoteproc_cdsp: remoteproc@32300000 { + compatible = "qcom,sm8450-cdsp-pas"; + reg = <0 0x032300000 0 0x1400000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8450_CX>, + <&rpmhpd SM8450_MXC>; + power-domain-names = "cx", "mxc"; + + memory-region = <&cdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; +<<<<<<< +======= + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x2161 0x0400>, + <&apps_smmu 0x1021 0x1420>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x2162 0x0400>, + <&apps_smmu 0x1022 0x1420>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x2163 0x0400>, + <&apps_smmu 0x1023 0x1420>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x2164 0x0400>, + <&apps_smmu 0x1024 0x1420>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x2165 0x0400>, + <&apps_smmu 0x1025 0x1420>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x2166 0x0400>, + <&apps_smmu 0x1026 0x1420>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x2167 0x0400>, + <&apps_smmu 0x1027 0x1420>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x2168 0x0400>, + <&apps_smmu 0x1028 0x1420>; + }; + + /* note: secure cb9 in downstream */ + }; +>>>>>>> + }; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sm8450-mpss-pas"; + reg = <0x0 0x04080000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd 0>, + <&rpmhpd 12>; + power-domain-names = "cx", "mss"; + + memory-region = <&mpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; + label = "modem"; + qcom,remote-pid = <1>; + }; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm8450-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; + qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>, + <94 609 31>, <125 63 1>, <126 716 12>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + +<<<<<<< +======= + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sm8450-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1000>, /* TM */ + <0 0x0c222000 0 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sm8450-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1000>, /* TM */ + <0 0x0c223000 0 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + +>>>>>>> + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + +<<<<<<< +======= + spmi_bus: spmi@c42d000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x0c400000 0x0 0x00003000>, + <0x0 0x0c500000 0x0 0x00400000>, + <0x0 0x0c440000 0x0 0x00080000>, + <0x0 0x0c4c0000 0x0 0x00010000>, + <0x0 0x0c42d000 0x0 0x00010000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + qcom,bus-id = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + +>>>>>>> + ipcc: mailbox@ed18000 { + compatible = "qcom,sm8450-ipcc", "qcom,ipcc"; + reg = <0 0x0ed18000 0 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8450-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 211>; + wakeup-parent = <&pdc>; + + pcie0_default_state: pcie0-default-state { + perst { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio95"; + function = "pcie0_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio98"; + function = "pcie1_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk { + pins = "gpio20", "gpio21"; + function = "qup6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk { + pins = "gpio48", "gpio49"; + function = "qup13"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk { + pins = "gpio52", "gpio53"; + function = "qup14"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart7_rx: qup-uart7-rx { + pins = "gpio26"; + function = "qup7"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart7_tx: qup-uart7-tx { + pins = "gpio27"; + function = "qup7"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart20_default: qup-uart20-default { + mux { + pins = "gpio76", "gpio77", + "gpio78", "gpio79"; + function = "qup20"; + }; + }; + + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8450-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17100000 { + compatible = "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x40000>; + reg = <0x0 0x17100000 0x0 0x10000>, /* GICD */ + <0x0 0x17180000 0x0 0x200000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + gic_its: msi-controller@17140000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x0 0x17140000 0x0 0x20000>; + }; + }; + + timer@17420000 { + compatible = "arm,armv7-timer-mem"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + reg = <0x0 0x17420000 0x0 0x1000>; + clock-frequency = <19200000>; + + frame@17421000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17421000 0x0 0x1000>, + <0x0 0x17422000 0x0 0x1000>; + }; + + frame@17423000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17423000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17425000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17425000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17427000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17427000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17429000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17429000 0x0 0x1000>; + status = "disabled"; + }; + + frame@1742b000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x1742b000 0x0 0x1000>; + status = "disabled"; + }; + + frame@1742d000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x1742d000 0x0 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@17a00000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x17a00000 0x0 0x10000>, + <0x0 0x17a10000 0x0 0x10000>, + <0x0 0x17a20000 0x0 0x10000>, + <0x0 0x17a30000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2", "drv-3"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>, + <WAKE_TCS 2>, <CONTROL_TCS 0>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sm8450-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sm8450-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@17d91000 { + compatible = "qcom,sm8450-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x17d91000 0 0x1000>, + <0 0x17d92000 0 0x1000>, + <0 0x17d93000 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1", "freq-domain2"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2"; + #freq-domain-cells = <1>; + }; + + gem_noc: interconnect@19100000 { + compatible = "qcom,sm8450-gem-noc"; + reg = <0 0x19100000 0 0xbb800>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + +<<<<<<< +======= + system-cache-controller@19200000 { + compatible = "qcom,sm8450-llcc"; + reg = <0 0x19200000 0 0x580000>, <0 0x19a00000 0 0x80000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + }; + +>>>>>>> + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sm8450-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + iommus = <&apps_smmu 0xe0 0x0>; + +<<<<<<< + interconnects = <&aggre1_noc MASTER_UFS_MEM &mc_virt SLAVE_EBI1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_UFS_MEM_CFG>; +======= + interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>; +>>>>>>> + interconnect-names = "ufs-ddr", "cpu-ufs"; + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + freq-table-hz = + <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sm8450-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0xe10>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", "ref_aux", "qref"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_0_CLKREF_EN>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: lanes@1d87400 { + reg = <0 0x01d87400 0 0x108>, + <0 0x01d87600 0 0x1e0>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x108>, + <0 0x01d87a00 0 0x1e0>; + #phy-cells = <0>; + #clock-cells = <0>; + }; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm8450-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB3_0_CLKREF_EN>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep", "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", + "dm_hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + nsp_noc: interconnect@320c0000 { + compatible = "qcom,sm8450-nsp-noc"; + reg = <0 0x320c0000 0 0x10000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_ag_noc: interconnect@3c40000 { + compatible = "qcom,sm8450-lpass-ag-noc"; + reg = <0 0x3c40000 0 0x17200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; +<<<<<<< +======= + }; + + thermal-zones { + aoss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 0>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 1>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 2>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 3>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss4-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 4>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 5>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu4_emerg0: cpu4-emerg0-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 6>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu4_emerg1: cpu4-emerg1-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 7>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu5_emerg0: cpu5-emerg0-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 8>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu5_emerg1: cpu5-emerg1-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 9>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu6_emerg0: cpu6-emerg0-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 10>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu6_emerg1: cpu6-emerg1-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 11>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu7_emerg0: cpu7-emerg0-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu7-middle-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 12>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu7_emerg1: cpu7-emerg1-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 13>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu7_emerg2: cpu7-emerg2-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + gpu-top-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens0 14>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu0_tj_cfg: tj_cfg { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpu-bottom-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens0 15>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu1_tj_cfg: tj_cfg { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 0>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 1>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu0_emerg: cpu0-emerg-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 2>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu1_emerg: cpu1-emerg-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 3>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu2_emerg: cpu2-emerg-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 4>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cpu3_emerg: cpu3-emerg-cfg { + temperature = <110000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + }; + + cdsp0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 5>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp_0_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cdsp1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 6>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp_1_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cdsp2-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 7>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp_2_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 8>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 9>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + ddr_config0: ddr0-config { + temperature = <90000>; + hysteresis = <5000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 10>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss0_config0: mdmss0-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss0_config1: mdmss0-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 11>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss1_config0: mdmss1-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss1_config1: mdmss1-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 12>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss2_config0: mdmss2-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss2_config1: mdmss2-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 13>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss3_config0: mdmss3-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss3_config1: mdmss3-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + camera0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 14>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + camera1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 15>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; +>>>>>>> + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <19200000>; + }; +}; diff --git a/rr-cache/3839daa314c5c9988fdb61de0cff73e15fefc3a2/postimage b/rr-cache/3839daa314c5c9988fdb61de0cff73e15fefc3a2/postimage new file mode 100644 index 0000000..f993f34 --- /dev/null +++ b/rr-cache/3839daa314c5c9988fdb61de0cff73e15fefc3a2/postimage @@ -0,0 +1,890 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * camss-csid.c + * + * Qualcomm MSM Camera Subsystem - CSID (CSI Decoder) Module + * + * Copyright (c) 2011-2015, The Linux Foundation. All rights reserved. + * Copyright (C) 2015-2018 Linaro Ltd. + */ +#include <linux/clk.h> +#include <linux/completion.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/regulator/consumer.h> +#include <media/media-entity.h> +#include <media/v4l2-device.h> +#include <media/v4l2-event.h> +#include <media/v4l2-subdev.h> + +#include "camss-csid.h" +#include "camss-csid-gen1.h" +#include "camss.h" + +/* offset of CSID registers in VFE region for VFE 480 */ +#define VFE_480_CSID_OFFSET 0x1200 +#define VFE_480_LITE_CSID_OFFSET 0x200 + +#define MSM_CSID_NAME "msm_csid" + +const char * const csid_testgen_modes[] = { + "Disabled", + "Incrementing", + "Alternating 0x55/0xAA", + "All Zeros 0x00", + "All Ones 0xFF", + "Pseudo-random Data", + "User Specified", + "Complex pattern", + "Color box", + "Color bars", + NULL +}; + +u32 csid_find_code(u32 *codes, unsigned int ncodes, + unsigned int match_format_idx, u32 match_code) +{ + int i; + + if (!match_code && (match_format_idx >= ncodes)) + return 0; + + for (i = 0; i < ncodes; i++) + if (match_code) { + if (codes[i] == match_code) + return match_code; + } else { + if (i == match_format_idx) + return codes[i]; + } + + return codes[0]; +} + +const struct csid_format *csid_get_fmt_entry(const struct csid_format *formats, + unsigned int nformats, + u32 code) +{ + unsigned int i; + + for (i = 0; i < nformats; i++) + if (code == formats[i].code) + return &formats[i]; + + WARN(1, "Unknown format\n"); + + return &formats[0]; +} + +/* + * csid_set_clock_rates - Calculate and set clock rates on CSID module + * @csiphy: CSID device + */ +static int csid_set_clock_rates(struct csid_device *csid) +{ + struct device *dev = csid->camss->dev; + const struct csid_format *fmt; + s64 link_freq; + int i, j; + int ret; + + fmt = csid_get_fmt_entry(csid->formats, csid->nformats, + csid->fmt[MSM_CSIPHY_PAD_SINK].code); + link_freq = camss_get_link_freq(&csid->subdev.entity, fmt->bpp, + csid->phy.lane_cnt); + if (link_freq < 0) + link_freq = 0; + + for (i = 0; i < csid->nclocks; i++) { + struct camss_clock *clock = &csid->clock[i]; + + if (!strcmp(clock->name, "csi0") || + !strcmp(clock->name, "csi1") || + !strcmp(clock->name, "csi2") || + !strcmp(clock->name, "csi3")) { + u64 min_rate = link_freq / 4; + long rate; + + camss_add_clock_margin(&min_rate); + + for (j = 0; j < clock->nfreqs; j++) + if (min_rate < clock->freq[j]) + break; + + if (j == clock->nfreqs) { + dev_err(dev, + "Pixel clock is too high for CSID\n"); + return -EINVAL; + } + + /* if sensor pixel clock is not available */ + /* set highest possible CSID clock rate */ + if (min_rate == 0) + j = clock->nfreqs - 1; + + rate = clk_round_rate(clock->clk, clock->freq[j]); + if (rate < 0) { + dev_err(dev, "clk round rate failed: %ld\n", + rate); + return -EINVAL; + } + + ret = clk_set_rate(clock->clk, rate); + if (ret < 0) { + dev_err(dev, "clk set rate failed: %d\n", ret); + return ret; + } + } else if (clock->nfreqs) { + clk_set_rate(clock->clk, clock->freq[0]); + } + } + + return 0; +} + +/* + * csid_set_power - Power on/off CSID module + * @sd: CSID V4L2 subdevice + * @on: Requested power state + * + * Return 0 on success or a negative error code otherwise + */ +static int csid_set_power(struct v4l2_subdev *sd, int on) +{ + struct csid_device *csid = v4l2_get_subdevdata(sd); + struct camss *camss = csid->camss; + struct device *dev = camss->dev; + struct vfe_device *vfe = &camss->vfe[csid->id]; + u32 version = camss->version; + int ret = 0; + + if (on) { + if (version == CAMSS_8250 || version == CAMSS_845) { + ret = vfe_get(vfe); + if (ret < 0) + return ret; + } + + ret = pm_runtime_resume_and_get(dev); + if (ret < 0) + return ret; + + ret = regulator_bulk_enable(csid->num_supplies, + csid->supplies); + if (ret < 0) { + pm_runtime_put_sync(dev); + return ret; + } + + ret = csid_set_clock_rates(csid); + if (ret < 0) { + regulator_bulk_disable(csid->num_supplies, + csid->supplies); + pm_runtime_put_sync(dev); + return ret; + } + + ret = camss_enable_clocks(csid->nclocks, csid->clock, dev); + if (ret < 0) { + regulator_bulk_disable(csid->num_supplies, + csid->supplies); + pm_runtime_put_sync(dev); + return ret; + } + + enable_irq(csid->irq); + + ret = csid->ops->reset(csid); + if (ret < 0) { + disable_irq(csid->irq); + camss_disable_clocks(csid->nclocks, csid->clock); + regulator_bulk_disable(csid->num_supplies, + csid->supplies); + pm_runtime_put_sync(dev); + return ret; + } + + csid->ops->hw_version(csid); + } else { + disable_irq(csid->irq); + camss_disable_clocks(csid->nclocks, csid->clock); + regulator_bulk_disable(csid->num_supplies, + csid->supplies); + pm_runtime_put_sync(dev); + if (version == CAMSS_8250 || version == CAMSS_845) + vfe_put(vfe); + } + + return ret; +} + +/* + * csid_set_stream - Enable/disable streaming on CSID module + * @sd: CSID V4L2 subdevice + * @enable: Requested streaming state + * + * Main configuration of CSID module is also done here. + * + * Return 0 on success or a negative error code otherwise + */ +static int csid_set_stream(struct v4l2_subdev *sd, int enable) +{ + struct csid_device *csid = v4l2_get_subdevdata(sd); + int ret; + + if (enable) { + ret = v4l2_ctrl_handler_setup(&csid->ctrls); + if (ret < 0) { + dev_err(csid->camss->dev, + "could not sync v4l2 controls: %d\n", ret); + return ret; + } + + if (!csid->testgen.enabled && + !media_entity_remote_pad(&csid->pads[MSM_CSID_PAD_SINK])) + return -ENOLINK; + } + + csid->ops->configure_stream(csid, enable); + + return 0; +} + +/* + * __csid_get_format - Get pointer to format structure + * @csid: CSID device + * @cfg: V4L2 subdev pad configuration + * @pad: pad from which format is requested + * @which: TRY or ACTIVE format + * + * Return pointer to TRY or ACTIVE format structure + */ +static struct v4l2_mbus_framefmt * +__csid_get_format(struct csid_device *csid, + struct v4l2_subdev_state *sd_state, + unsigned int pad, + enum v4l2_subdev_format_whence which) +{ + if (which == V4L2_SUBDEV_FORMAT_TRY) + return v4l2_subdev_get_try_format(&csid->subdev, sd_state, + pad); + + return &csid->fmt[pad]; +} + +/* + * csid_try_format - Handle try format by pad subdev method + * @csid: CSID device + * @cfg: V4L2 subdev pad configuration + * @pad: pad on which format is requested + * @fmt: pointer to v4l2 format structure + * @which: wanted subdev format + */ +static void csid_try_format(struct csid_device *csid, + struct v4l2_subdev_state *sd_state, + unsigned int pad, + struct v4l2_mbus_framefmt *fmt, + enum v4l2_subdev_format_whence which) +{ + unsigned int i; + + switch (pad) { + case MSM_CSID_PAD_SINK: + /* Set format on sink pad */ + + for (i = 0; i < csid->nformats; i++) + if (fmt->code == csid->formats[i].code) + break; + + /* If not found, use UYVY as default */ + if (i >= csid->nformats) + fmt->code = MEDIA_BUS_FMT_UYVY8_2X8; + + fmt->width = clamp_t(u32, fmt->width, 1, 8191); + fmt->height = clamp_t(u32, fmt->height, 1, 8191); + + fmt->field = V4L2_FIELD_NONE; + fmt->colorspace = V4L2_COLORSPACE_SRGB; + + break; + + case MSM_CSID_PAD_SRC: + if (csid->testgen_mode->cur.val == 0) { + /* Test generator is disabled, */ + /* keep pad formats in sync */ + u32 code = fmt->code; + + *fmt = *__csid_get_format(csid, sd_state, + MSM_CSID_PAD_SINK, which); + fmt->code = csid->ops->src_pad_code(csid, fmt->code, 0, code); + } else { + /* Test generator is enabled, set format on source */ + /* pad to allow test generator usage */ + + for (i = 0; i < csid->nformats; i++) + if (csid->formats[i].code == fmt->code) + break; + + /* If not found, use UYVY as default */ + if (i >= csid->nformats) + fmt->code = MEDIA_BUS_FMT_UYVY8_2X8; + + fmt->width = clamp_t(u32, fmt->width, 1, 8191); + fmt->height = clamp_t(u32, fmt->height, 1, 8191); + + fmt->field = V4L2_FIELD_NONE; + } + break; + } + + fmt->colorspace = V4L2_COLORSPACE_SRGB; +} + +/* + * csid_enum_mbus_code - Handle pixel format enumeration + * @sd: CSID V4L2 subdevice + * @cfg: V4L2 subdev pad configuration + * @code: pointer to v4l2_subdev_mbus_code_enum structure + * return -EINVAL or zero on success + */ +static int csid_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct csid_device *csid = v4l2_get_subdevdata(sd); + + if (code->pad == MSM_CSID_PAD_SINK) { + if (code->index >= csid->nformats) + return -EINVAL; + + code->code = csid->formats[code->index].code; + } else { + if (csid->testgen_mode->cur.val == 0) { + struct v4l2_mbus_framefmt *sink_fmt; + + sink_fmt = __csid_get_format(csid, sd_state, + MSM_CSID_PAD_SINK, + code->which); + + code->code = csid->ops->src_pad_code(csid, sink_fmt->code, + code->index, 0); + if (!code->code) + return -EINVAL; + } else { + if (code->index >= csid->nformats) + return -EINVAL; + + code->code = csid->formats[code->index].code; + } + } + + return 0; +} + +/* + * csid_enum_frame_size - Handle frame size enumeration + * @sd: CSID V4L2 subdevice + * @cfg: V4L2 subdev pad configuration + * @fse: pointer to v4l2_subdev_frame_size_enum structure + * return -EINVAL or zero on success + */ +static int csid_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_frame_size_enum *fse) +{ + struct csid_device *csid = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt format; + + if (fse->index != 0) + return -EINVAL; + + format.code = fse->code; + format.width = 1; + format.height = 1; + csid_try_format(csid, sd_state, fse->pad, &format, fse->which); + fse->min_width = format.width; + fse->min_height = format.height; + + if (format.code != fse->code) + return -EINVAL; + + format.code = fse->code; + format.width = -1; + format.height = -1; + csid_try_format(csid, sd_state, fse->pad, &format, fse->which); + fse->max_width = format.width; + fse->max_height = format.height; + + return 0; +} + +/* + * csid_get_format - Handle get format by pads subdev method + * @sd: CSID V4L2 subdevice + * @cfg: V4L2 subdev pad configuration + * @fmt: pointer to v4l2 subdev format structure + * + * Return -EINVAL or zero on success + */ +static int csid_get_format(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + struct csid_device *csid = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + format = __csid_get_format(csid, sd_state, fmt->pad, fmt->which); + if (format == NULL) + return -EINVAL; + + fmt->format = *format; + + return 0; +} + +/* + * csid_set_format - Handle set format by pads subdev method + * @sd: CSID V4L2 subdevice + * @cfg: V4L2 subdev pad configuration + * @fmt: pointer to v4l2 subdev format structure + * + * Return -EINVAL or zero on success + */ +static int csid_set_format(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + struct csid_device *csid = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + format = __csid_get_format(csid, sd_state, fmt->pad, fmt->which); + if (format == NULL) + return -EINVAL; + + csid_try_format(csid, sd_state, fmt->pad, &fmt->format, fmt->which); + *format = fmt->format; + + /* Propagate the format from sink to source */ + if (fmt->pad == MSM_CSID_PAD_SINK) { + format = __csid_get_format(csid, sd_state, MSM_CSID_PAD_SRC, + fmt->which); + + *format = fmt->format; + csid_try_format(csid, sd_state, MSM_CSID_PAD_SRC, format, + fmt->which); + } + + return 0; +} + +/* + * csid_init_formats - Initialize formats on all pads + * @sd: CSID V4L2 subdevice + * @fh: V4L2 subdev file handle + * + * Initialize all pad formats with default values. + * + * Return 0 on success or a negative error code otherwise + */ +static int csid_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_subdev_format format = { + .pad = MSM_CSID_PAD_SINK, + .which = fh ? V4L2_SUBDEV_FORMAT_TRY : + V4L2_SUBDEV_FORMAT_ACTIVE, + .format = { + .code = MEDIA_BUS_FMT_UYVY8_2X8, + .width = 1920, + .height = 1080 + } + }; + + return csid_set_format(sd, fh ? fh->state : NULL, &format); +} + +/* + * csid_set_test_pattern - Set test generator's pattern mode + * @csid: CSID device + * @value: desired test pattern mode + * + * Return 0 on success or a negative error code otherwise + */ +static int csid_set_test_pattern(struct csid_device *csid, s32 value) +{ + struct csid_testgen_config *tg = &csid->testgen; + + /* If CSID is linked to CSIPHY, do not allow to enable test generator */ + if (value && media_entity_remote_pad(&csid->pads[MSM_CSID_PAD_SINK])) + return -EBUSY; + + tg->enabled = !!value; + + return csid->ops->configure_testgen_pattern(csid, value); +} + +/* + * csid_s_ctrl - Handle set control subdev method + * @ctrl: pointer to v4l2 control structure + * + * Return 0 on success or a negative error code otherwise + */ +static int csid_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct csid_device *csid = container_of(ctrl->handler, + struct csid_device, ctrls); + int ret = -EINVAL; + + switch (ctrl->id) { + case V4L2_CID_TEST_PATTERN: + ret = csid_set_test_pattern(csid, ctrl->val); + break; + } + + return ret; +} + +static const struct v4l2_ctrl_ops csid_ctrl_ops = { + .s_ctrl = csid_s_ctrl, +}; + +/* + * msm_csid_subdev_init - Initialize CSID device structure and resources + * @csid: CSID device + * @res: CSID module resources table + * @id: CSID module id + * + * Return 0 on success or a negative error code otherwise + */ +int msm_csid_subdev_init(struct camss *camss, struct csid_device *csid, + const struct resources *res, u8 id) +{ + struct device *dev = camss->dev; + struct platform_device *pdev = to_platform_device(dev); + int i, j; + int ret; + + csid->camss = camss; + csid->id = id; + + if (camss->version == CAMSS_8x16) { + csid->ops = &csid_ops_4_1; + } else if (camss->version == CAMSS_8x96 || + camss->version == CAMSS_660) { + csid->ops = &csid_ops_4_7; + } else if (camss->version == CAMSS_845 || + camss->version == CAMSS_8250) { + csid->ops = &csid_ops_gen2; + } else { + return -EINVAL; + } + csid->ops->subdev_init(csid); + + /* Memory */ + + if (camss->version == CAMSS_8250) { + /* for titan 480, CSID registers are inside the VFE region, + * between the VFE "top" and "bus" registers. this requires + * VFE to be initialized before CSID + */ + if (id >= 2) /* VFE/CSID lite */ + csid->base = camss->vfe[id].base + VFE_480_LITE_CSID_OFFSET; + else + csid->base = camss->vfe[id].base + VFE_480_CSID_OFFSET; + } else { + csid->base = devm_platform_ioremap_resource_byname(pdev, res->reg[0]); + if (IS_ERR(csid->base)) + return PTR_ERR(csid->base); + } + + /* Interrupt */ + + ret = platform_get_irq_byname(pdev, res->interrupt[0]); + if (ret < 0) + return ret; + + csid->irq = ret; + snprintf(csid->irq_name, sizeof(csid->irq_name), "%s_%s%d", + dev_name(dev), MSM_CSID_NAME, csid->id); + ret = devm_request_irq(dev, csid->irq, csid->ops->isr, + IRQF_TRIGGER_RISING | IRQF_NO_AUTOEN, + csid->irq_name, csid); + if (ret < 0) { + dev_err(dev, "request_irq failed: %d\n", ret); + return ret; + } + + /* Clocks */ + + csid->nclocks = 0; + while (res->clock[csid->nclocks]) + csid->nclocks++; + + csid->clock = devm_kcalloc(dev, csid->nclocks, sizeof(*csid->clock), + GFP_KERNEL); + if (!csid->clock) + return -ENOMEM; + + for (i = 0; i < csid->nclocks; i++) { + struct camss_clock *clock = &csid->clock[i]; + + clock->clk = devm_clk_get(dev, res->clock[i]); + if (IS_ERR(clock->clk)) + return PTR_ERR(clock->clk); + + clock->name = res->clock[i]; + + clock->nfreqs = 0; + while (res->clock_rate[i][clock->nfreqs]) + clock->nfreqs++; + + if (!clock->nfreqs) { + clock->freq = NULL; + continue; + } + + clock->freq = devm_kcalloc(dev, + clock->nfreqs, + sizeof(*clock->freq), + GFP_KERNEL); + if (!clock->freq) + return -ENOMEM; + + for (j = 0; j < clock->nfreqs; j++) + clock->freq[j] = res->clock_rate[i][j]; + } + + /* Regulator */ + for (i = 0; i < ARRAY_SIZE(res->regulators); i++) { + if (res->regulators[i]) + csid->num_supplies++; + } + + if (csid->num_supplies) { + csid->supplies = devm_kmalloc_array(camss->dev, + csid->num_supplies, + sizeof(csid->supplies), + GFP_KERNEL); + if (!csid->supplies) + return -ENOMEM; + } + + for (i = 0; i < csid->num_supplies; i++) + csid->supplies[i].supply = res->regulators[i]; + + ret = devm_regulator_bulk_get(camss->dev, csid->num_supplies, + csid->supplies); + if (ret) + return ret; + + init_completion(&csid->reset_complete); + + return 0; +} + +/* + * msm_csid_get_csid_id - Get CSID HW module id + * @entity: Pointer to CSID media entity structure + * @id: Return CSID HW module id here + */ +void msm_csid_get_csid_id(struct media_entity *entity, u8 *id) +{ + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity); + struct csid_device *csid = v4l2_get_subdevdata(sd); + + *id = csid->id; +} + +/* + * csid_get_lane_assign - Calculate CSI2 lane assign configuration parameter + * @lane_cfg - CSI2 lane configuration + * + * Return lane assign + */ +static u32 csid_get_lane_assign(struct csiphy_lanes_cfg *lane_cfg) +{ + u32 lane_assign = 0; + int i; + + for (i = 0; i < lane_cfg->num_data; i++) + lane_assign |= lane_cfg->data[i].pos << (i * 4); + + return lane_assign; +} + +/* + * csid_link_setup - Setup CSID connections + * @entity: Pointer to media entity structure + * @local: Pointer to local pad + * @remote: Pointer to remote pad + * @flags: Link flags + * + * Return 0 on success + */ +static int csid_link_setup(struct media_entity *entity, + const struct media_pad *local, + const struct media_pad *remote, u32 flags) +{ + if (flags & MEDIA_LNK_FL_ENABLED) + if (media_entity_remote_pad(local)) + return -EBUSY; + + if ((local->flags & MEDIA_PAD_FL_SINK) && + (flags & MEDIA_LNK_FL_ENABLED)) { + struct v4l2_subdev *sd; + struct csid_device *csid; + struct csiphy_device *csiphy; + struct csiphy_lanes_cfg *lane_cfg; + struct v4l2_subdev_format format = { 0 }; + + sd = media_entity_to_v4l2_subdev(entity); + csid = v4l2_get_subdevdata(sd); + + /* If test generator is enabled */ + /* do not allow a link from CSIPHY to CSID */ + if (csid->testgen_mode->cur.val != 0) + return -EBUSY; + + sd = media_entity_to_v4l2_subdev(remote->entity); + csiphy = v4l2_get_subdevdata(sd); + + /* If a sensor is not linked to CSIPHY */ + /* do no allow a link from CSIPHY to CSID */ + if (!csiphy->cfg.csi2) + return -EPERM; + + csid->phy.csiphy_id = csiphy->id; + + lane_cfg = &csiphy->cfg.csi2->lane_cfg; + csid->phy.lane_cnt = lane_cfg->num_data; + csid->phy.lane_assign = csid_get_lane_assign(lane_cfg); + + /* Reset format on source pad to sink pad format */ + format.pad = MSM_CSID_PAD_SRC; + format.which = V4L2_SUBDEV_FORMAT_ACTIVE; + csid_set_format(&csid->subdev, NULL, &format); + } + + return 0; +} + +static const struct v4l2_subdev_core_ops csid_core_ops = { + .s_power = csid_set_power, + .subscribe_event = v4l2_ctrl_subdev_subscribe_event, + .unsubscribe_event = v4l2_event_subdev_unsubscribe, +}; + +static const struct v4l2_subdev_video_ops csid_video_ops = { + .s_stream = csid_set_stream, +}; + +static const struct v4l2_subdev_pad_ops csid_pad_ops = { + .enum_mbus_code = csid_enum_mbus_code, + .enum_frame_size = csid_enum_frame_size, + .get_fmt = csid_get_format, + .set_fmt = csid_set_format, +}; + +static const struct v4l2_subdev_ops csid_v4l2_ops = { + .core = &csid_core_ops, + .video = &csid_video_ops, + .pad = &csid_pad_ops, +}; + +static const struct v4l2_subdev_internal_ops csid_v4l2_internal_ops = { + .open = csid_init_formats, +}; + +static const struct media_entity_operations csid_media_ops = { + .link_setup = csid_link_setup, + .link_validate = v4l2_subdev_link_validate, +}; + +/* + * msm_csid_register_entity - Register subdev node for CSID module + * @csid: CSID device + * @v4l2_dev: V4L2 device + * + * Return 0 on success or a negative error code otherwise + */ +int msm_csid_register_entity(struct csid_device *csid, + struct v4l2_device *v4l2_dev) +{ + struct v4l2_subdev *sd = &csid->subdev; + struct media_pad *pads = csid->pads; + struct device *dev = csid->camss->dev; + int ret; + + v4l2_subdev_init(sd, &csid_v4l2_ops); + sd->internal_ops = &csid_v4l2_internal_ops; + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | + V4L2_SUBDEV_FL_HAS_EVENTS; + snprintf(sd->name, ARRAY_SIZE(sd->name), "%s%d", + MSM_CSID_NAME, csid->id); + v4l2_set_subdevdata(sd, csid); + + ret = v4l2_ctrl_handler_init(&csid->ctrls, 1); + if (ret < 0) { + dev_err(dev, "Failed to init ctrl handler: %d\n", ret); + return ret; + } + + csid->testgen_mode = v4l2_ctrl_new_std_menu_items(&csid->ctrls, + &csid_ctrl_ops, V4L2_CID_TEST_PATTERN, + csid->testgen.nmodes, 0, 0, + csid->testgen.modes); + + if (csid->ctrls.error) { + dev_err(dev, "Failed to init ctrl: %d\n", csid->ctrls.error); + ret = csid->ctrls.error; + goto free_ctrl; + } + + csid->subdev.ctrl_handler = &csid->ctrls; + + ret = csid_init_formats(sd, NULL); + if (ret < 0) { + dev_err(dev, "Failed to init format: %d\n", ret); + goto free_ctrl; + } + + pads[MSM_CSID_PAD_SINK].flags = MEDIA_PAD_FL_SINK; + pads[MSM_CSID_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE; + + sd->entity.function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER; + sd->entity.ops = &csid_media_ops; + ret = media_entity_pads_init(&sd->entity, MSM_CSID_PADS_NUM, pads); + if (ret < 0) { + dev_err(dev, "Failed to init media entity: %d\n", ret); + goto free_ctrl; + } + + ret = v4l2_device_register_subdev(v4l2_dev, sd); + if (ret < 0) { + dev_err(dev, "Failed to register subdev: %d\n", ret); + goto media_cleanup; + } + + return 0; + +media_cleanup: + media_entity_cleanup(&sd->entity); +free_ctrl: + v4l2_ctrl_handler_free(&csid->ctrls); + + return ret; +} + +/* + * msm_csid_unregister_entity - Unregister CSID module subdev node + * @csid: CSID device + */ +void msm_csid_unregister_entity(struct csid_device *csid) +{ + v4l2_device_unregister_subdev(&csid->subdev); + media_entity_cleanup(&csid->subdev.entity); + v4l2_ctrl_handler_free(&csid->ctrls); +} diff --git a/rr-cache/3839daa314c5c9988fdb61de0cff73e15fefc3a2/preimage b/rr-cache/3839daa314c5c9988fdb61de0cff73e15fefc3a2/preimage new file mode 100644 index 0000000..2ff04e6 --- /dev/null +++ b/rr-cache/3839daa314c5c9988fdb61de0cff73e15fefc3a2/preimage @@ -0,0 +1,894 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * camss-csid.c + * + * Qualcomm MSM Camera Subsystem - CSID (CSI Decoder) Module + * + * Copyright (c) 2011-2015, The Linux Foundation. All rights reserved. + * Copyright (C) 2015-2018 Linaro Ltd. + */ +#include <linux/clk.h> +#include <linux/completion.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/regulator/consumer.h> +#include <media/media-entity.h> +#include <media/v4l2-device.h> +#include <media/v4l2-event.h> +#include <media/v4l2-subdev.h> + +#include "camss-csid.h" +#include "camss-csid-gen1.h" +#include "camss.h" + +/* offset of CSID registers in VFE region for VFE 480 */ +#define VFE_480_CSID_OFFSET 0x1200 +#define VFE_480_LITE_CSID_OFFSET 0x200 + +#define MSM_CSID_NAME "msm_csid" + +const char * const csid_testgen_modes[] = { + "Disabled", + "Incrementing", + "Alternating 0x55/0xAA", + "All Zeros 0x00", + "All Ones 0xFF", + "Pseudo-random Data", + "User Specified", + "Complex pattern", + "Color box", + "Color bars", + NULL +}; + +u32 csid_find_code(u32 *codes, unsigned int ncodes, + unsigned int match_format_idx, u32 match_code) +{ + int i; + + if (!match_code && (match_format_idx >= ncodes)) + return 0; + + for (i = 0; i < ncodes; i++) + if (match_code) { + if (codes[i] == match_code) + return match_code; + } else { + if (i == match_format_idx) + return codes[i]; + } + + return codes[0]; +} + +const struct csid_format *csid_get_fmt_entry(const struct csid_format *formats, + unsigned int nformats, + u32 code) +{ + unsigned int i; + + for (i = 0; i < nformats; i++) + if (code == formats[i].code) + return &formats[i]; + + WARN(1, "Unknown format\n"); + + return &formats[0]; +} + +/* + * csid_set_clock_rates - Calculate and set clock rates on CSID module + * @csiphy: CSID device + */ +static int csid_set_clock_rates(struct csid_device *csid) +{ + struct device *dev = csid->camss->dev; + const struct csid_format *fmt; + s64 link_freq; + int i, j; + int ret; + + fmt = csid_get_fmt_entry(csid->formats, csid->nformats, + csid->fmt[MSM_CSIPHY_PAD_SINK].code); + link_freq = camss_get_link_freq(&csid->subdev.entity, fmt->bpp, + csid->phy.lane_cnt); + if (link_freq < 0) + link_freq = 0; + + for (i = 0; i < csid->nclocks; i++) { + struct camss_clock *clock = &csid->clock[i]; + + if (!strcmp(clock->name, "csi0") || + !strcmp(clock->name, "csi1") || + !strcmp(clock->name, "csi2") || + !strcmp(clock->name, "csi3")) { + u64 min_rate = link_freq / 4; + long rate; + + camss_add_clock_margin(&min_rate); + + for (j = 0; j < clock->nfreqs; j++) + if (min_rate < clock->freq[j]) + break; + + if (j == clock->nfreqs) { + dev_err(dev, + "Pixel clock is too high for CSID\n"); + return -EINVAL; + } + + /* if sensor pixel clock is not available */ + /* set highest possible CSID clock rate */ + if (min_rate == 0) + j = clock->nfreqs - 1; + + rate = clk_round_rate(clock->clk, clock->freq[j]); + if (rate < 0) { + dev_err(dev, "clk round rate failed: %ld\n", + rate); + return -EINVAL; + } + + ret = clk_set_rate(clock->clk, rate); + if (ret < 0) { + dev_err(dev, "clk set rate failed: %d\n", ret); + return ret; + } + } else if (clock->nfreqs) { + clk_set_rate(clock->clk, clock->freq[0]); + } + } + + return 0; +} + +/* + * csid_set_power - Power on/off CSID module + * @sd: CSID V4L2 subdevice + * @on: Requested power state + * + * Return 0 on success or a negative error code otherwise + */ +static int csid_set_power(struct v4l2_subdev *sd, int on) +{ + struct csid_device *csid = v4l2_get_subdevdata(sd); + struct camss *camss = csid->camss; + struct device *dev = camss->dev; + struct vfe_device *vfe = &camss->vfe[csid->id]; + u32 version = camss->version; +<<<<<<< + int ret = 0; +======= + int ret; +>>>>>>> + + if (on) { + if (version == CAMSS_8250 || version == CAMSS_845) { + ret = vfe_get(vfe); + if (ret < 0) + return ret; + } + + ret = pm_runtime_resume_and_get(dev); + if (ret < 0) + return ret; + + ret = regulator_bulk_enable(csid->num_supplies, + csid->supplies); + if (ret < 0) { + pm_runtime_put_sync(dev); + return ret; + } + + ret = csid_set_clock_rates(csid); + if (ret < 0) { + regulator_bulk_disable(csid->num_supplies, + csid->supplies); + pm_runtime_put_sync(dev); + return ret; + } + + ret = camss_enable_clocks(csid->nclocks, csid->clock, dev); + if (ret < 0) { + regulator_bulk_disable(csid->num_supplies, + csid->supplies); + pm_runtime_put_sync(dev); + return ret; + } + + enable_irq(csid->irq); + + ret = csid->ops->reset(csid); + if (ret < 0) { + disable_irq(csid->irq); + camss_disable_clocks(csid->nclocks, csid->clock); + regulator_bulk_disable(csid->num_supplies, + csid->supplies); + pm_runtime_put_sync(dev); + return ret; + } + + csid->ops->hw_version(csid); + } else { + disable_irq(csid->irq); + camss_disable_clocks(csid->nclocks, csid->clock); + regulator_bulk_disable(csid->num_supplies, + csid->supplies); + pm_runtime_put_sync(dev); + if (version == CAMSS_8250 || version == CAMSS_845) + vfe_put(vfe); + } + + return ret; +} + +/* + * csid_set_stream - Enable/disable streaming on CSID module + * @sd: CSID V4L2 subdevice + * @enable: Requested streaming state + * + * Main configuration of CSID module is also done here. + * + * Return 0 on success or a negative error code otherwise + */ +static int csid_set_stream(struct v4l2_subdev *sd, int enable) +{ + struct csid_device *csid = v4l2_get_subdevdata(sd); + int ret; + + if (enable) { + ret = v4l2_ctrl_handler_setup(&csid->ctrls); + if (ret < 0) { + dev_err(csid->camss->dev, + "could not sync v4l2 controls: %d\n", ret); + return ret; + } + + if (!csid->testgen.enabled && + !media_entity_remote_pad(&csid->pads[MSM_CSID_PAD_SINK])) + return -ENOLINK; + } + + csid->ops->configure_stream(csid, enable); + + return 0; +} + +/* + * __csid_get_format - Get pointer to format structure + * @csid: CSID device + * @cfg: V4L2 subdev pad configuration + * @pad: pad from which format is requested + * @which: TRY or ACTIVE format + * + * Return pointer to TRY or ACTIVE format structure + */ +static struct v4l2_mbus_framefmt * +__csid_get_format(struct csid_device *csid, + struct v4l2_subdev_state *sd_state, + unsigned int pad, + enum v4l2_subdev_format_whence which) +{ + if (which == V4L2_SUBDEV_FORMAT_TRY) + return v4l2_subdev_get_try_format(&csid->subdev, sd_state, + pad); + + return &csid->fmt[pad]; +} + +/* + * csid_try_format - Handle try format by pad subdev method + * @csid: CSID device + * @cfg: V4L2 subdev pad configuration + * @pad: pad on which format is requested + * @fmt: pointer to v4l2 format structure + * @which: wanted subdev format + */ +static void csid_try_format(struct csid_device *csid, + struct v4l2_subdev_state *sd_state, + unsigned int pad, + struct v4l2_mbus_framefmt *fmt, + enum v4l2_subdev_format_whence which) +{ + unsigned int i; + + switch (pad) { + case MSM_CSID_PAD_SINK: + /* Set format on sink pad */ + + for (i = 0; i < csid->nformats; i++) + if (fmt->code == csid->formats[i].code) + break; + + /* If not found, use UYVY as default */ + if (i >= csid->nformats) + fmt->code = MEDIA_BUS_FMT_UYVY8_2X8; + + fmt->width = clamp_t(u32, fmt->width, 1, 8191); + fmt->height = clamp_t(u32, fmt->height, 1, 8191); + + fmt->field = V4L2_FIELD_NONE; + fmt->colorspace = V4L2_COLORSPACE_SRGB; + + break; + + case MSM_CSID_PAD_SRC: + if (csid->testgen_mode->cur.val == 0) { + /* Test generator is disabled, */ + /* keep pad formats in sync */ + u32 code = fmt->code; + + *fmt = *__csid_get_format(csid, sd_state, + MSM_CSID_PAD_SINK, which); + fmt->code = csid->ops->src_pad_code(csid, fmt->code, 0, code); + } else { + /* Test generator is enabled, set format on source */ + /* pad to allow test generator usage */ + + for (i = 0; i < csid->nformats; i++) + if (csid->formats[i].code == fmt->code) + break; + + /* If not found, use UYVY as default */ + if (i >= csid->nformats) + fmt->code = MEDIA_BUS_FMT_UYVY8_2X8; + + fmt->width = clamp_t(u32, fmt->width, 1, 8191); + fmt->height = clamp_t(u32, fmt->height, 1, 8191); + + fmt->field = V4L2_FIELD_NONE; + } + break; + } + + fmt->colorspace = V4L2_COLORSPACE_SRGB; +} + +/* + * csid_enum_mbus_code - Handle pixel format enumeration + * @sd: CSID V4L2 subdevice + * @cfg: V4L2 subdev pad configuration + * @code: pointer to v4l2_subdev_mbus_code_enum structure + * return -EINVAL or zero on success + */ +static int csid_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct csid_device *csid = v4l2_get_subdevdata(sd); + + if (code->pad == MSM_CSID_PAD_SINK) { + if (code->index >= csid->nformats) + return -EINVAL; + + code->code = csid->formats[code->index].code; + } else { + if (csid->testgen_mode->cur.val == 0) { + struct v4l2_mbus_framefmt *sink_fmt; + + sink_fmt = __csid_get_format(csid, sd_state, + MSM_CSID_PAD_SINK, + code->which); + + code->code = csid->ops->src_pad_code(csid, sink_fmt->code, + code->index, 0); + if (!code->code) + return -EINVAL; + } else { + if (code->index >= csid->nformats) + return -EINVAL; + + code->code = csid->formats[code->index].code; + } + } + + return 0; +} + +/* + * csid_enum_frame_size - Handle frame size enumeration + * @sd: CSID V4L2 subdevice + * @cfg: V4L2 subdev pad configuration + * @fse: pointer to v4l2_subdev_frame_size_enum structure + * return -EINVAL or zero on success + */ +static int csid_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_frame_size_enum *fse) +{ + struct csid_device *csid = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt format; + + if (fse->index != 0) + return -EINVAL; + + format.code = fse->code; + format.width = 1; + format.height = 1; + csid_try_format(csid, sd_state, fse->pad, &format, fse->which); + fse->min_width = format.width; + fse->min_height = format.height; + + if (format.code != fse->code) + return -EINVAL; + + format.code = fse->code; + format.width = -1; + format.height = -1; + csid_try_format(csid, sd_state, fse->pad, &format, fse->which); + fse->max_width = format.width; + fse->max_height = format.height; + + return 0; +} + +/* + * csid_get_format - Handle get format by pads subdev method + * @sd: CSID V4L2 subdevice + * @cfg: V4L2 subdev pad configuration + * @fmt: pointer to v4l2 subdev format structure + * + * Return -EINVAL or zero on success + */ +static int csid_get_format(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + struct csid_device *csid = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + format = __csid_get_format(csid, sd_state, fmt->pad, fmt->which); + if (format == NULL) + return -EINVAL; + + fmt->format = *format; + + return 0; +} + +/* + * csid_set_format - Handle set format by pads subdev method + * @sd: CSID V4L2 subdevice + * @cfg: V4L2 subdev pad configuration + * @fmt: pointer to v4l2 subdev format structure + * + * Return -EINVAL or zero on success + */ +static int csid_set_format(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + struct csid_device *csid = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + format = __csid_get_format(csid, sd_state, fmt->pad, fmt->which); + if (format == NULL) + return -EINVAL; + + csid_try_format(csid, sd_state, fmt->pad, &fmt->format, fmt->which); + *format = fmt->format; + + /* Propagate the format from sink to source */ + if (fmt->pad == MSM_CSID_PAD_SINK) { + format = __csid_get_format(csid, sd_state, MSM_CSID_PAD_SRC, + fmt->which); + + *format = fmt->format; + csid_try_format(csid, sd_state, MSM_CSID_PAD_SRC, format, + fmt->which); + } + + return 0; +} + +/* + * csid_init_formats - Initialize formats on all pads + * @sd: CSID V4L2 subdevice + * @fh: V4L2 subdev file handle + * + * Initialize all pad formats with default values. + * + * Return 0 on success or a negative error code otherwise + */ +static int csid_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_subdev_format format = { + .pad = MSM_CSID_PAD_SINK, + .which = fh ? V4L2_SUBDEV_FORMAT_TRY : + V4L2_SUBDEV_FORMAT_ACTIVE, + .format = { + .code = MEDIA_BUS_FMT_UYVY8_2X8, + .width = 1920, + .height = 1080 + } + }; + + return csid_set_format(sd, fh ? fh->state : NULL, &format); +} + +/* + * csid_set_test_pattern - Set test generator's pattern mode + * @csid: CSID device + * @value: desired test pattern mode + * + * Return 0 on success or a negative error code otherwise + */ +static int csid_set_test_pattern(struct csid_device *csid, s32 value) +{ + struct csid_testgen_config *tg = &csid->testgen; + + /* If CSID is linked to CSIPHY, do not allow to enable test generator */ + if (value && media_entity_remote_pad(&csid->pads[MSM_CSID_PAD_SINK])) + return -EBUSY; + + tg->enabled = !!value; + + return csid->ops->configure_testgen_pattern(csid, value); +} + +/* + * csid_s_ctrl - Handle set control subdev method + * @ctrl: pointer to v4l2 control structure + * + * Return 0 on success or a negative error code otherwise + */ +static int csid_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct csid_device *csid = container_of(ctrl->handler, + struct csid_device, ctrls); + int ret = -EINVAL; + + switch (ctrl->id) { + case V4L2_CID_TEST_PATTERN: + ret = csid_set_test_pattern(csid, ctrl->val); + break; + } + + return ret; +} + +static const struct v4l2_ctrl_ops csid_ctrl_ops = { + .s_ctrl = csid_s_ctrl, +}; + +/* + * msm_csid_subdev_init - Initialize CSID device structure and resources + * @csid: CSID device + * @res: CSID module resources table + * @id: CSID module id + * + * Return 0 on success or a negative error code otherwise + */ +int msm_csid_subdev_init(struct camss *camss, struct csid_device *csid, + const struct resources *res, u8 id) +{ + struct device *dev = camss->dev; + struct platform_device *pdev = to_platform_device(dev); + int i, j; + int ret; + + csid->camss = camss; + csid->id = id; + + if (camss->version == CAMSS_8x16) { + csid->ops = &csid_ops_4_1; + } else if (camss->version == CAMSS_8x96 || + camss->version == CAMSS_660) { + csid->ops = &csid_ops_4_7; + } else if (camss->version == CAMSS_845 || + camss->version == CAMSS_8250) { + csid->ops = &csid_ops_gen2; + } else { + return -EINVAL; + } + csid->ops->subdev_init(csid); + + /* Memory */ + + if (camss->version == CAMSS_8250) { + /* for titan 480, CSID registers are inside the VFE region, + * between the VFE "top" and "bus" registers. this requires + * VFE to be initialized before CSID + */ + if (id >= 2) /* VFE/CSID lite */ + csid->base = camss->vfe[id].base + VFE_480_LITE_CSID_OFFSET; + else + csid->base = camss->vfe[id].base + VFE_480_CSID_OFFSET; + } else { + csid->base = devm_platform_ioremap_resource_byname(pdev, res->reg[0]); + if (IS_ERR(csid->base)) + return PTR_ERR(csid->base); + } + + /* Interrupt */ + + ret = platform_get_irq_byname(pdev, res->interrupt[0]); + if (ret < 0) + return ret; + + csid->irq = ret; + snprintf(csid->irq_name, sizeof(csid->irq_name), "%s_%s%d", + dev_name(dev), MSM_CSID_NAME, csid->id); + ret = devm_request_irq(dev, csid->irq, csid->ops->isr, + IRQF_TRIGGER_RISING | IRQF_NO_AUTOEN, + csid->irq_name, csid); + if (ret < 0) { + dev_err(dev, "request_irq failed: %d\n", ret); + return ret; + } + + /* Clocks */ + + csid->nclocks = 0; + while (res->clock[csid->nclocks]) + csid->nclocks++; + + csid->clock = devm_kcalloc(dev, csid->nclocks, sizeof(*csid->clock), + GFP_KERNEL); + if (!csid->clock) + return -ENOMEM; + + for (i = 0; i < csid->nclocks; i++) { + struct camss_clock *clock = &csid->clock[i]; + + clock->clk = devm_clk_get(dev, res->clock[i]); + if (IS_ERR(clock->clk)) + return PTR_ERR(clock->clk); + + clock->name = res->clock[i]; + + clock->nfreqs = 0; + while (res->clock_rate[i][clock->nfreqs]) + clock->nfreqs++; + + if (!clock->nfreqs) { + clock->freq = NULL; + continue; + } + + clock->freq = devm_kcalloc(dev, + clock->nfreqs, + sizeof(*clock->freq), + GFP_KERNEL); + if (!clock->freq) + return -ENOMEM; + + for (j = 0; j < clock->nfreqs; j++) + clock->freq[j] = res->clock_rate[i][j]; + } + + /* Regulator */ + for (i = 0; i < ARRAY_SIZE(res->regulators); i++) { + if (res->regulators[i]) + csid->num_supplies++; + } + + if (csid->num_supplies) { + csid->supplies = devm_kmalloc_array(camss->dev, + csid->num_supplies, + sizeof(csid->supplies), + GFP_KERNEL); + if (!csid->supplies) + return -ENOMEM; + } + + for (i = 0; i < csid->num_supplies; i++) + csid->supplies[i].supply = res->regulators[i]; + + ret = devm_regulator_bulk_get(camss->dev, csid->num_supplies, + csid->supplies); + if (ret) + return ret; + + init_completion(&csid->reset_complete); + + return 0; +} + +/* + * msm_csid_get_csid_id - Get CSID HW module id + * @entity: Pointer to CSID media entity structure + * @id: Return CSID HW module id here + */ +void msm_csid_get_csid_id(struct media_entity *entity, u8 *id) +{ + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity); + struct csid_device *csid = v4l2_get_subdevdata(sd); + + *id = csid->id; +} + +/* + * csid_get_lane_assign - Calculate CSI2 lane assign configuration parameter + * @lane_cfg - CSI2 lane configuration + * + * Return lane assign + */ +static u32 csid_get_lane_assign(struct csiphy_lanes_cfg *lane_cfg) +{ + u32 lane_assign = 0; + int i; + + for (i = 0; i < lane_cfg->num_data; i++) + lane_assign |= lane_cfg->data[i].pos << (i * 4); + + return lane_assign; +} + +/* + * csid_link_setup - Setup CSID connections + * @entity: Pointer to media entity structure + * @local: Pointer to local pad + * @remote: Pointer to remote pad + * @flags: Link flags + * + * Return 0 on success + */ +static int csid_link_setup(struct media_entity *entity, + const struct media_pad *local, + const struct media_pad *remote, u32 flags) +{ + if (flags & MEDIA_LNK_FL_ENABLED) + if (media_entity_remote_pad(local)) + return -EBUSY; + + if ((local->flags & MEDIA_PAD_FL_SINK) && + (flags & MEDIA_LNK_FL_ENABLED)) { + struct v4l2_subdev *sd; + struct csid_device *csid; + struct csiphy_device *csiphy; + struct csiphy_lanes_cfg *lane_cfg; + struct v4l2_subdev_format format = { 0 }; + + sd = media_entity_to_v4l2_subdev(entity); + csid = v4l2_get_subdevdata(sd); + + /* If test generator is enabled */ + /* do not allow a link from CSIPHY to CSID */ + if (csid->testgen_mode->cur.val != 0) + return -EBUSY; + + sd = media_entity_to_v4l2_subdev(remote->entity); + csiphy = v4l2_get_subdevdata(sd); + + /* If a sensor is not linked to CSIPHY */ + /* do no allow a link from CSIPHY to CSID */ + if (!csiphy->cfg.csi2) + return -EPERM; + + csid->phy.csiphy_id = csiphy->id; + + lane_cfg = &csiphy->cfg.csi2->lane_cfg; + csid->phy.lane_cnt = lane_cfg->num_data; + csid->phy.lane_assign = csid_get_lane_assign(lane_cfg); + + /* Reset format on source pad to sink pad format */ + format.pad = MSM_CSID_PAD_SRC; + format.which = V4L2_SUBDEV_FORMAT_ACTIVE; + csid_set_format(&csid->subdev, NULL, &format); + } + + return 0; +} + +static const struct v4l2_subdev_core_ops csid_core_ops = { + .s_power = csid_set_power, + .subscribe_event = v4l2_ctrl_subdev_subscribe_event, + .unsubscribe_event = v4l2_event_subdev_unsubscribe, +}; + +static const struct v4l2_subdev_video_ops csid_video_ops = { + .s_stream = csid_set_stream, +}; + +static const struct v4l2_subdev_pad_ops csid_pad_ops = { + .enum_mbus_code = csid_enum_mbus_code, + .enum_frame_size = csid_enum_frame_size, + .get_fmt = csid_get_format, + .set_fmt = csid_set_format, +}; + +static const struct v4l2_subdev_ops csid_v4l2_ops = { + .core = &csid_core_ops, + .video = &csid_video_ops, + .pad = &csid_pad_ops, +}; + +static const struct v4l2_subdev_internal_ops csid_v4l2_internal_ops = { + .open = csid_init_formats, +}; + +static const struct media_entity_operations csid_media_ops = { + .link_setup = csid_link_setup, + .link_validate = v4l2_subdev_link_validate, +}; + +/* + * msm_csid_register_entity - Register subdev node for CSID module + * @csid: CSID device + * @v4l2_dev: V4L2 device + * + * Return 0 on success or a negative error code otherwise + */ +int msm_csid_register_entity(struct csid_device *csid, + struct v4l2_device *v4l2_dev) +{ + struct v4l2_subdev *sd = &csid->subdev; + struct media_pad *pads = csid->pads; + struct device *dev = csid->camss->dev; + int ret; + + v4l2_subdev_init(sd, &csid_v4l2_ops); + sd->internal_ops = &csid_v4l2_internal_ops; + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | + V4L2_SUBDEV_FL_HAS_EVENTS; + snprintf(sd->name, ARRAY_SIZE(sd->name), "%s%d", + MSM_CSID_NAME, csid->id); + v4l2_set_subdevdata(sd, csid); + + ret = v4l2_ctrl_handler_init(&csid->ctrls, 1); + if (ret < 0) { + dev_err(dev, "Failed to init ctrl handler: %d\n", ret); + return ret; + } + + csid->testgen_mode = v4l2_ctrl_new_std_menu_items(&csid->ctrls, + &csid_ctrl_ops, V4L2_CID_TEST_PATTERN, + csid->testgen.nmodes, 0, 0, + csid->testgen.modes); + + if (csid->ctrls.error) { + dev_err(dev, "Failed to init ctrl: %d\n", csid->ctrls.error); + ret = csid->ctrls.error; + goto free_ctrl; + } + + csid->subdev.ctrl_handler = &csid->ctrls; + + ret = csid_init_formats(sd, NULL); + if (ret < 0) { + dev_err(dev, "Failed to init format: %d\n", ret); + goto free_ctrl; + } + + pads[MSM_CSID_PAD_SINK].flags = MEDIA_PAD_FL_SINK; + pads[MSM_CSID_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE; + + sd->entity.function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER; + sd->entity.ops = &csid_media_ops; + ret = media_entity_pads_init(&sd->entity, MSM_CSID_PADS_NUM, pads); + if (ret < 0) { + dev_err(dev, "Failed to init media entity: %d\n", ret); + goto free_ctrl; + } + + ret = v4l2_device_register_subdev(v4l2_dev, sd); + if (ret < 0) { + dev_err(dev, "Failed to register subdev: %d\n", ret); + goto media_cleanup; + } + + return 0; + +media_cleanup: + media_entity_cleanup(&sd->entity); +free_ctrl: + v4l2_ctrl_handler_free(&csid->ctrls); + + return ret; +} + +/* + * msm_csid_unregister_entity - Unregister CSID module subdev node + * @csid: CSID device + */ +void msm_csid_unregister_entity(struct csid_device *csid) +{ + v4l2_device_unregister_subdev(&csid->subdev); + media_entity_cleanup(&csid->subdev.entity); + v4l2_ctrl_handler_free(&csid->ctrls); +} diff --git a/rr-cache/42e0c78a08961387c521d66df762a169f2c82014/postimage b/rr-cache/42e0c78a08961387c521d66df762a169f2c82014/postimage new file mode 100644 index 0000000..b39a11e --- /dev/null +++ b/rr-cache/42e0c78a08961387c521d66df762a169f2c82014/postimage @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# MHI bus +# +# Copyright (c) 2021, Linaro Ltd. +# + +source "drivers/bus/mhi/host/Kconfig" +source "drivers/bus/mhi/ep/Kconfig" diff --git a/rr-cache/42e0c78a08961387c521d66df762a169f2c82014/preimage b/rr-cache/42e0c78a08961387c521d66df762a169f2c82014/preimage new file mode 100644 index 0000000..0e995bc --- /dev/null +++ b/rr-cache/42e0c78a08961387c521d66df762a169f2c82014/preimage @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# MHI bus +# +# Copyright (c) 2021, Linaro Ltd. +# + +source "drivers/bus/mhi/host/Kconfig" +<<<<<<< +======= +source "drivers/bus/mhi/ep/Kconfig" +>>>>>>> diff --git a/rr-cache/5827ea96d82158fcd557fa14f13f88d4f5342a87/thisimage b/rr-cache/5827ea96d82158fcd557fa14f13f88d4f5342a87/thisimage index 0fe79f6..87e7cec 100644 --- a/rr-cache/5827ea96d82158fcd557fa14f13f88d4f5342a87/thisimage +++ b/rr-cache/5827ea96d82158fcd557fa14f13f88d4f5342a87/thisimage @@ -12,6 +12,7 @@ #include <dt-bindings/clock/qcom,lpass-sdm845.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,videocc-sdm845.h> +#include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sdm845.h> @@ -79,22 +80,22 @@ #size-cells = <2>; ranges; - hyp_mem: memory@85700000 { + hyp_mem: hyp-mem@85700000 { reg = <0 0x85700000 0 0x600000>; no-map; }; - xbl_mem: memory@85e00000 { + xbl_mem: xbl-mem@85e00000 { reg = <0 0x85e00000 0 0x100000>; no-map; }; - aop_mem: memory@85fc0000 { + aop_mem: aop-mem@85fc0000 { reg = <0 0x85fc0000 0 0x20000>; no-map; }; - aop_cmd_db_mem: memory@85fe0000 { + aop_cmd_db_mem: aop-cmd-db-mem@85fe0000 { compatible = "qcom,cmd-db"; reg = <0x0 0x85fe0000 0 0x20000>; no-map; @@ -107,12 +108,12 @@ hwlocks = <&tcsr_mutex 3>; }; - tz_mem: memory@86200000 { + tz_mem: tz@86200000 { reg = <0 0x86200000 0 0x2d00000>; no-map; }; - rmtfs_mem: memory@88f00000 { + rmtfs_mem: rmtfs@88f00000 { compatible = "qcom,rmtfs-mem"; reg = <0 0x88f00000 0 0x200000>; no-map; @@ -121,67 +122,67 @@ qcom,vmid = <15>; }; - qseecom_mem: memory@8ab00000 { + qseecom_mem: qseecom@8ab00000 { reg = <0 0x8ab00000 0 0x1400000>; no-map; }; - camera_mem: memory@8bf00000 { + camera_mem: camera-mem@8bf00000 { reg = <0 0x8bf00000 0 0x500000>; no-map; }; - ipa_fw_mem: memory@8c400000 { + ipa_fw_mem: ipa-fw@8c400000 { reg = <0 0x8c400000 0 0x10000>; no-map; }; - ipa_gsi_mem: memory@8c410000 { + ipa_gsi_mem: ipa-gsi@8c410000 { reg = <0 0x8c410000 0 0x5000>; no-map; }; - gpu_mem: memory@8c415000 { + gpu_mem: gpu@8c415000 { reg = <0 0x8c415000 0 0x2000>; no-map; }; - adsp_mem: memory@8c500000 { + adsp_mem: adsp@8c500000 { reg = <0 0x8c500000 0 0x1a00000>; no-map; }; - wlan_msa_mem: memory@8df00000 { + wlan_msa_mem: wlan-msa@8df00000 { reg = <0 0x8df00000 0 0x100000>; no-map; }; - mpss_region: memory@8e000000 { + mpss_region: mpss@8e000000 { reg = <0 0x8e000000 0 0x7800000>; no-map; }; - venus_mem: memory@95800000 { + venus_mem: venus@95800000 { reg = <0 0x95800000 0 0x500000>; no-map; }; - cdsp_mem: memory@95d00000 { + cdsp_mem: cdsp@95d00000 { reg = <0 0x95d00000 0 0x800000>; no-map; }; - mba_region: memory@96500000 { + mba_region: mba@96500000 { reg = <0 0x96500000 0 0x200000>; no-map; }; - slpi_mem: memory@96700000 { + slpi_mem: slpi@96700000 { reg = <0 0x96700000 0 0x1400000>; no-map; }; - spss_mem: memory@97b00000 { + spss_mem: spss@97b00000 { reg = <0 0x97b00000 0 0x100000>; no-map; }; @@ -787,7 +788,7 @@ apr { compatible = "qcom,apr-v2"; qcom,glink-channels = "apr_audio_svc"; - qcom,apr-domain = <APR_DOMAIN_ADSP>; + qcom,domain = <APR_DOMAIN_ADSP>; #address-cells = <1>; #size-cells = <0>; qcom,intents = <512 20>; @@ -838,6 +839,7 @@ compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; label = "adsp"; + qcom,non-secure-domain; #address-cells = <1>; #size-cells = <0>; @@ -888,6 +890,7 @@ compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; label = "cdsp"; + qcom,non-secure-domain; #address-cells = <1>; #size-cells = <0>; @@ -1125,6 +1128,29 @@ }; }; + gpi_dma0: dma-controller@800000 { + #dma-cells = <3>; + compatible = "qcom,sdm845-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x0016 0x0>; + status = "disabled"; + }; + qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x008c0000 0 0x6000>; @@ -1171,6 +1197,9 @@ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1544,6 +1573,29 @@ }; }; + gpi_dma1: dma-controller@0xa00000 { + #dma-cells = <3>; + compatible = "qcom,sdm845-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x06d6 0x0>; + status = "disabled"; + }; + qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x00ac0000 0 0x6000>; @@ -1967,7 +2019,7 @@ }; }; - system-cache-controller@1100000 { + llcc: system-cache-controller@1100000 { compatible = "qcom,sdm845-llcc"; reg = <0 0x01100000 0 0x200000>, <0 0x01300000 0 0x50000>; reg-names = "llcc_base", "llcc_broadcast_base"; @@ -2587,6 +2639,13 @@ "gpio2", "gpio3"; function = "qup0"; }; + + config { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + drive-strength = <6>; + bias-disable; + }; }; qup_spi1_default: qup-spi1-default { @@ -3613,10 +3672,10 @@ #clock-cells = <0>; clock-frequency = <9600000>; clock-output-names = "mclk"; - qcom,micbias1-millivolt = <1800>; - qcom,micbias2-millivolt = <1800>; - qcom,micbias3-millivolt = <1800>; - qcom,micbias4-millivolt = <1800>; + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; #address-cells = <1>; #size-cells = <1>; @@ -4158,6 +4217,8 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; }; dsi_opp_table: dsi-opp-table { @@ -4712,7 +4773,7 @@ }; aoss_qmp: power-controller@c300000 { - compatible = "qcom,sdm845-aoss-qmp"; + compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x100000>; interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; mboxes = <&apss_shared 0>; @@ -5351,7 +5412,7 @@ }; }; - gpu-thermal-top { + gpu-top-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -5366,7 +5427,7 @@ }; }; - gpu-thermal-bottom { + gpu-bottom-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/rr-cache/5a3e9ffbd56d837e84d2fe9ab02163ccccaa0945/postimage b/rr-cache/5a3e9ffbd56d837e84d2fe9ab02163ccccaa0945/postimage new file mode 100644 index 0000000..6db8907 --- /dev/null +++ b/rr-cache/5a3e9ffbd56d837e84d2fe9ab02163ccccaa0945/postimage @@ -0,0 +1,326 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2022, Linaro Ltd. + * + */ + +#ifndef _MHI_COMMON_H +#define _MHI_COMMON_H + +#include <linux/bitfield.h> +#include <linux/mhi.h> + +/* MHI registers */ +#define MHIREGLEN 0x00 +#define MHIVER 0x08 +#define MHICFG 0x10 +#define CHDBOFF 0x18 +#define ERDBOFF 0x20 +#define BHIOFF 0x28 +#define BHIEOFF 0x2c +#define DEBUGOFF 0x30 +#define MHICTRL 0x38 +#define MHISTATUS 0x48 +#define CCABAP_LOWER 0x58 +#define CCABAP_HIGHER 0x5c +#define ECABAP_LOWER 0x60 +#define ECABAP_HIGHER 0x64 +#define CRCBAP_LOWER 0x68 +#define CRCBAP_HIGHER 0x6c +#define CRDB_LOWER 0x70 +#define CRDB_HIGHER 0x74 +#define MHICTRLBASE_LOWER 0x80 +#define MHICTRLBASE_HIGHER 0x84 +#define MHICTRLLIMIT_LOWER 0x88 +#define MHICTRLLIMIT_HIGHER 0x8c +#define MHIDATABASE_LOWER 0x98 +#define MHIDATABASE_HIGHER 0x9c +#define MHIDATALIMIT_LOWER 0xa0 +#define MHIDATALIMIT_HIGHER 0xa4 + +/* MHI BHI registers */ +#define BHI_BHIVERSION_MINOR 0x00 +#define BHI_BHIVERSION_MAJOR 0x04 +#define BHI_IMGADDR_LOW 0x08 +#define BHI_IMGADDR_HIGH 0x0c +#define BHI_IMGSIZE 0x10 +#define BHI_RSVD1 0x14 +#define BHI_IMGTXDB 0x18 +#define BHI_RSVD2 0x1c +#define BHI_INTVEC 0x20 +#define BHI_RSVD3 0x24 +#define BHI_EXECENV 0x28 +#define BHI_STATUS 0x2c +#define BHI_ERRCODE 0x30 +#define BHI_ERRDBG1 0x34 +#define BHI_ERRDBG2 0x38 +#define BHI_ERRDBG3 0x3c +#define BHI_SERIALNU 0x40 +#define BHI_SBLANTIROLLVER 0x44 +#define BHI_NUMSEG 0x48 +#define BHI_MSMHWID(n) (0x4c + (0x4 * (n))) +#define BHI_OEMPKHASH(n) (0x64 + (0x4 * (n))) +#define BHI_RSVD5 0xc4 + +/* BHI register bits */ +#define BHI_TXDB_SEQNUM_BMSK GENMASK(29, 0) +#define BHI_TXDB_SEQNUM_SHFT 0 +#define BHI_STATUS_MASK GENMASK(31, 30) +#define BHI_STATUS_ERROR 0x03 +#define BHI_STATUS_SUCCESS 0x02 +#define BHI_STATUS_RESET 0x00 + +/* MHI BHIE registers */ +#define BHIE_MSMSOCID_OFFS 0x00 +#define BHIE_TXVECADDR_LOW_OFFS 0x2c +#define BHIE_TXVECADDR_HIGH_OFFS 0x30 +#define BHIE_TXVECSIZE_OFFS 0x34 +#define BHIE_TXVECDB_OFFS 0x3c +#define BHIE_TXVECSTATUS_OFFS 0x44 +#define BHIE_RXVECADDR_LOW_OFFS 0x60 +#define BHIE_RXVECADDR_HIGH_OFFS 0x64 +#define BHIE_RXVECSIZE_OFFS 0x68 +#define BHIE_RXVECDB_OFFS 0x70 +#define BHIE_RXVECSTATUS_OFFS 0x78 + +/* BHIE register bits */ +#define BHIE_TXVECDB_SEQNUM_BMSK GENMASK(29, 0) +#define BHIE_TXVECDB_SEQNUM_SHFT 0 +#define BHIE_TXVECSTATUS_SEQNUM_BMSK GENMASK(29, 0) +#define BHIE_TXVECSTATUS_SEQNUM_SHFT 0 +#define BHIE_TXVECSTATUS_STATUS_BMSK GENMASK(31, 30) +#define BHIE_TXVECSTATUS_STATUS_SHFT 30 +#define BHIE_TXVECSTATUS_STATUS_RESET 0x00 +#define BHIE_TXVECSTATUS_STATUS_XFER_COMPL 0x02 +#define BHIE_TXVECSTATUS_STATUS_ERROR 0x03 +#define BHIE_RXVECDB_SEQNUM_BMSK GENMASK(29, 0) +#define BHIE_RXVECDB_SEQNUM_SHFT 0 +#define BHIE_RXVECSTATUS_SEQNUM_BMSK GENMASK(29, 0) +#define BHIE_RXVECSTATUS_SEQNUM_SHFT 0 +#define BHIE_RXVECSTATUS_STATUS_BMSK GENMASK(31, 30) +#define BHIE_RXVECSTATUS_STATUS_SHFT 30 +#define BHIE_RXVECSTATUS_STATUS_RESET 0x00 +#define BHIE_RXVECSTATUS_STATUS_XFER_COMPL 0x02 +#define BHIE_RXVECSTATUS_STATUS_ERROR 0x03 + +/* MHI register bits */ +#define MHICFG_NHWER_MASK GENMASK(31, 24) +#define MHICFG_NER_MASK GENMASK(23, 16) +#define MHICFG_NHWCH_MASK GENMASK(15, 8) +#define MHICFG_NCH_MASK GENMASK(7, 0) +#define MHICTRL_MHISTATE_MASK GENMASK(15, 8) +#define MHICTRL_RESET_MASK BIT(1) +#define MHISTATUS_MHISTATE_MASK GENMASK(15, 8) +#define MHISTATUS_SYSERR_MASK BIT(2) +#define MHISTATUS_READY_MASK BIT(0) + +/* Command Ring Element macros */ +/* No operation command */ +#define MHI_TRE_CMD_NOOP_PTR 0 +#define MHI_TRE_CMD_NOOP_DWORD0 0 +#define MHI_TRE_CMD_NOOP_DWORD1 cpu_to_le32(FIELD_PREP(GENMASK(23, 16), MHI_CMD_NOP)) + +/* Channel reset command */ +#define MHI_TRE_CMD_RESET_PTR 0 +#define MHI_TRE_CMD_RESET_DWORD0 0 +#define MHI_TRE_CMD_RESET_DWORD1(chid) cpu_to_le32(FIELD_PREP(GENMASK(31, 24), chid) | \ + FIELD_PREP(GENMASK(23, 16), \ + MHI_CMD_RESET_CHAN)) + +/* Channel stop command */ +#define MHI_TRE_CMD_STOP_PTR 0 +#define MHI_TRE_CMD_STOP_DWORD0 0 +#define MHI_TRE_CMD_STOP_DWORD1(chid) cpu_to_le32(FIELD_PREP(GENMASK(31, 24), chid) | \ + FIELD_PREP(GENMASK(23, 16), \ + MHI_CMD_STOP_CHAN)) + +/* Channel start command */ +#define MHI_TRE_CMD_START_PTR 0 +#define MHI_TRE_CMD_START_DWORD0 0 +#define MHI_TRE_CMD_START_DWORD1(chid) cpu_to_le32(FIELD_PREP(GENMASK(31, 24), chid) | \ + FIELD_PREP(GENMASK(23, 16), \ + MHI_CMD_START_CHAN)) + +#define MHI_TRE_GET_DWORD(tre, word) le32_to_cpu((tre)->dword[(word)]) +#define MHI_TRE_GET_CMD_CHID(tre) FIELD_GET(GENMASK(31, 24), MHI_TRE_GET_DWORD(tre, 1)) +#define MHI_TRE_GET_CMD_TYPE(tre) FIELD_GET(GENMASK(23, 16), MHI_TRE_GET_DWORD(tre, 1)) + +/* Event descriptor macros */ +#define MHI_TRE_EV_PTR(ptr) cpu_to_le64(ptr) +#define MHI_TRE_EV_DWORD0(code, len) cpu_to_le32(FIELD_PREP(GENMASK(31, 24), code) | \ + FIELD_PREP(GENMASK(15, 0), len)) +#define MHI_TRE_EV_DWORD1(chid, type) cpu_to_le32(FIELD_PREP(GENMASK(31, 24), chid) | \ + FIELD_PREP(GENMASK(23, 16), type)) +#define MHI_TRE_GET_EV_PTR(tre) le64_to_cpu((tre)->ptr) +#define MHI_TRE_GET_EV_CODE(tre) FIELD_GET(GENMASK(31, 24), (MHI_TRE_GET_DWORD(tre, 0))) +#define MHI_TRE_GET_EV_LEN(tre) FIELD_GET(GENMASK(15, 0), (MHI_TRE_GET_DWORD(tre, 0))) +#define MHI_TRE_GET_EV_CHID(tre) FIELD_GET(GENMASK(31, 24), (MHI_TRE_GET_DWORD(tre, 1))) +#define MHI_TRE_GET_EV_TYPE(tre) FIELD_GET(GENMASK(23, 16), (MHI_TRE_GET_DWORD(tre, 1))) +#define MHI_TRE_GET_EV_STATE(tre) FIELD_GET(GENMASK(31, 24), (MHI_TRE_GET_DWORD(tre, 0))) +#define MHI_TRE_GET_EV_EXECENV(tre) FIELD_GET(GENMASK(31, 24), (MHI_TRE_GET_DWORD(tre, 0))) +#define MHI_TRE_GET_EV_SEQ(tre) MHI_TRE_GET_DWORD(tre, 0) +#define MHI_TRE_GET_EV_TIME(tre) MHI_TRE_GET_EV_PTR(tre) +#define MHI_TRE_GET_EV_COOKIE(tre) lower_32_bits(MHI_TRE_GET_EV_PTR(tre)) +#define MHI_TRE_GET_EV_VEID(tre) FIELD_GET(GENMASK(23, 16), (MHI_TRE_GET_DWORD(tre, 0))) +#define MHI_TRE_GET_EV_LINKSPEED(tre) FIELD_GET(GENMASK(31, 24), (MHI_TRE_GET_DWORD(tre, 1))) +#define MHI_TRE_GET_EV_LINKWIDTH(tre) FIELD_GET(GENMASK(7, 0), (MHI_TRE_GET_DWORD(tre, 0))) + +/* State change event */ +#define MHI_SC_EV_PTR 0 +#define MHI_SC_EV_DWORD0(state) cpu_to_le32(FIELD_PREP(GENMASK(31, 24), state)) +#define MHI_SC_EV_DWORD1(type) cpu_to_le32(FIELD_PREP(GENMASK(23, 16), type)) + +/* EE event */ +#define MHI_EE_EV_PTR 0 +#define MHI_EE_EV_DWORD0(ee) cpu_to_le32(FIELD_PREP(GENMASK(31, 24), ee)) +#define MHI_EE_EV_DWORD1(type) cpu_to_le32(FIELD_PREP(GENMASK(23, 16), type)) + + +/* Command Completion event */ +#define MHI_CC_EV_PTR(ptr) cpu_to_le64(ptr) +#define MHI_CC_EV_DWORD0(code) cpu_to_le32(FIELD_PREP(GENMASK(31, 24), code)) +#define MHI_CC_EV_DWORD1(type) cpu_to_le32(FIELD_PREP(GENMASK(23, 16), type)) + +/* Transfer descriptor macros */ +#define MHI_TRE_DATA_PTR(ptr) cpu_to_le64(ptr) +#define MHI_TRE_DATA_DWORD0(len) cpu_to_le32(FIELD_PREP(GENMASK(15, 0), len)) +#define MHI_TRE_TYPE_TRANSFER 2 +#define MHI_TRE_DATA_DWORD1(bei, ieot, ieob, chain) cpu_to_le32(FIELD_PREP(GENMASK(23, 16), \ + MHI_TRE_TYPE_TRANSFER) | \ + FIELD_PREP(BIT(10), bei) | \ + FIELD_PREP(BIT(9), ieot) | \ + FIELD_PREP(BIT(8), ieob) | \ + FIELD_PREP(BIT(0), chain)) +#define MHI_TRE_DATA_GET_PTR(tre) le64_to_cpu((tre)->ptr) +#define MHI_TRE_DATA_GET_LEN(tre) FIELD_GET(GENMASK(15, 0), MHI_TRE_GET_DWORD(tre, 0)) +#define MHI_TRE_DATA_GET_CHAIN(tre) (!!(FIELD_GET(BIT(0), MHI_TRE_GET_DWORD(tre, 1)))) +#define MHI_TRE_DATA_GET_IEOB(tre) (!!(FIELD_GET(BIT(8), MHI_TRE_GET_DWORD(tre, 1)))) +#define MHI_TRE_DATA_GET_IEOT(tre) (!!(FIELD_GET(BIT(9), MHI_TRE_GET_DWORD(tre, 1)))) +#define MHI_TRE_DATA_GET_BEI(tre) (!!(FIELD_GET(BIT(10), MHI_TRE_GET_DWORD(tre, 1)))) + +/* RSC transfer descriptor macros */ +#define MHI_RSCTRE_DATA_PTR(ptr, len) cpu_to_le64(FIELD_PREP(GENMASK(64, 48), len) | ptr) +#define MHI_RSCTRE_DATA_DWORD0(cookie) cpu_to_le32(cookie) +#define MHI_RSCTRE_DATA_DWORD1 cpu_to_le32(FIELD_PREP(GENMASK(23, 16), \ + MHI_PKT_TYPE_COALESCING)) + +enum mhi_pkt_type { + MHI_PKT_TYPE_INVALID = 0x0, + MHI_PKT_TYPE_NOOP_CMD = 0x1, + MHI_PKT_TYPE_TRANSFER = 0x2, + MHI_PKT_TYPE_COALESCING = 0x8, + MHI_PKT_TYPE_RESET_CHAN_CMD = 0x10, + MHI_PKT_TYPE_STOP_CHAN_CMD = 0x11, + MHI_PKT_TYPE_START_CHAN_CMD = 0x12, + MHI_PKT_TYPE_STATE_CHANGE_EVENT = 0x20, + MHI_PKT_TYPE_CMD_COMPLETION_EVENT = 0x21, + MHI_PKT_TYPE_TX_EVENT = 0x22, + MHI_PKT_TYPE_RSC_TX_EVENT = 0x28, + MHI_PKT_TYPE_EE_EVENT = 0x40, + MHI_PKT_TYPE_TSYNC_EVENT = 0x48, + MHI_PKT_TYPE_BW_REQ_EVENT = 0x50, + MHI_PKT_TYPE_STALE_EVENT, /* internal event */ +}; + +/* MHI transfer completion events */ +enum mhi_ev_ccs { + MHI_EV_CC_INVALID = 0x0, + MHI_EV_CC_SUCCESS = 0x1, + MHI_EV_CC_EOT = 0x2, /* End of transfer event */ + MHI_EV_CC_OVERFLOW = 0x3, + MHI_EV_CC_EOB = 0x4, /* End of block event */ + MHI_EV_CC_OOB = 0x5, /* Out of block event */ + MHI_EV_CC_DB_MODE = 0x6, + MHI_EV_CC_UNDEFINED_ERR = 0x10, + MHI_EV_CC_BAD_TRE = 0x11, +}; + +/* Channel state */ +enum mhi_ch_state { + MHI_CH_STATE_DISABLED, + MHI_CH_STATE_ENABLED, + MHI_CH_STATE_RUNNING, + MHI_CH_STATE_SUSPENDED, + MHI_CH_STATE_STOP, + MHI_CH_STATE_ERROR, +}; + +enum mhi_cmd_type { + MHI_CMD_NOP = 1, + MHI_CMD_RESET_CHAN = 16, + MHI_CMD_STOP_CHAN = 17, + MHI_CMD_START_CHAN = 18, +}; + +#define EV_CTX_RESERVED_MASK GENMASK(7, 0) +#define EV_CTX_INTMODC_MASK GENMASK(15, 8) +#define EV_CTX_INTMODT_MASK GENMASK(31, 16) +struct mhi_event_ctxt { + __le32 intmod; + __le32 ertype; + __le32 msivec; + + __le64 rbase __packed __aligned(4); + __le64 rlen __packed __aligned(4); + __le64 rp __packed __aligned(4); + __le64 wp __packed __aligned(4); +}; + +#define CHAN_CTX_CHSTATE_MASK GENMASK(7, 0) +#define CHAN_CTX_BRSTMODE_MASK GENMASK(9, 8) +#define CHAN_CTX_POLLCFG_MASK GENMASK(15, 10) +#define CHAN_CTX_RESERVED_MASK GENMASK(31, 16) +struct mhi_chan_ctxt { + __le32 chcfg; + __le32 chtype; + __le32 erindex; + + __le64 rbase __packed __aligned(4); + __le64 rlen __packed __aligned(4); + __le64 rp __packed __aligned(4); + __le64 wp __packed __aligned(4); +}; + +struct mhi_cmd_ctxt { + __le32 reserved0; + __le32 reserved1; + __le32 reserved2; + + __le64 rbase __packed __aligned(4); + __le64 rlen __packed __aligned(4); + __le64 rp __packed __aligned(4); + __le64 wp __packed __aligned(4); +}; + +struct mhi_ring_element { + __le64 ptr; + __le32 dword[2]; +}; + +static inline const char * const mhi_state_str(enum mhi_state state) +{ + switch (state) { + case MHI_STATE_RESET: + return "RESET"; + case MHI_STATE_READY: + return "READY"; + case MHI_STATE_M0: + return "M0"; + case MHI_STATE_M1: + return "M1"; + case MHI_STATE_M2: + return "M2"; + case MHI_STATE_M3: + return "M3"; + case MHI_STATE_M3_FAST: + return "M3 FAST"; + case MHI_STATE_BHI: + return "BHI"; + case MHI_STATE_SYS_ERR: + return "SYS ERROR"; + default: + return "Unknown state"; + } +}; + +#endif /* _MHI_COMMON_H */ diff --git a/rr-cache/5a3e9ffbd56d837e84d2fe9ab02163ccccaa0945/preimage b/rr-cache/5a3e9ffbd56d837e84d2fe9ab02163ccccaa0945/preimage new file mode 100644 index 0000000..8d5ae54 --- /dev/null +++ b/rr-cache/5a3e9ffbd56d837e84d2fe9ab02163ccccaa0945/preimage @@ -0,0 +1,336 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2022, Linaro Ltd. + * + */ + +#ifndef _MHI_COMMON_H +#define _MHI_COMMON_H + +#include <linux/bitfield.h> +#include <linux/mhi.h> + +/* MHI registers */ +#define MHIREGLEN 0x00 +#define MHIVER 0x08 +#define MHICFG 0x10 +#define CHDBOFF 0x18 +#define ERDBOFF 0x20 +#define BHIOFF 0x28 +#define BHIEOFF 0x2c +#define DEBUGOFF 0x30 +#define MHICTRL 0x38 +#define MHISTATUS 0x48 +#define CCABAP_LOWER 0x58 +#define CCABAP_HIGHER 0x5c +#define ECABAP_LOWER 0x60 +#define ECABAP_HIGHER 0x64 +#define CRCBAP_LOWER 0x68 +#define CRCBAP_HIGHER 0x6c +#define CRDB_LOWER 0x70 +#define CRDB_HIGHER 0x74 +#define MHICTRLBASE_LOWER 0x80 +#define MHICTRLBASE_HIGHER 0x84 +#define MHICTRLLIMIT_LOWER 0x88 +#define MHICTRLLIMIT_HIGHER 0x8c +#define MHIDATABASE_LOWER 0x98 +#define MHIDATABASE_HIGHER 0x9c +#define MHIDATALIMIT_LOWER 0xa0 +#define MHIDATALIMIT_HIGHER 0xa4 + +/* MHI BHI registers */ +#define BHI_BHIVERSION_MINOR 0x00 +#define BHI_BHIVERSION_MAJOR 0x04 +#define BHI_IMGADDR_LOW 0x08 +#define BHI_IMGADDR_HIGH 0x0c +#define BHI_IMGSIZE 0x10 +#define BHI_RSVD1 0x14 +#define BHI_IMGTXDB 0x18 +#define BHI_RSVD2 0x1c +#define BHI_INTVEC 0x20 +#define BHI_RSVD3 0x24 +#define BHI_EXECENV 0x28 +#define BHI_STATUS 0x2c +#define BHI_ERRCODE 0x30 +#define BHI_ERRDBG1 0x34 +#define BHI_ERRDBG2 0x38 +#define BHI_ERRDBG3 0x3c +#define BHI_SERIALNU 0x40 +#define BHI_SBLANTIROLLVER 0x44 +#define BHI_NUMSEG 0x48 +#define BHI_MSMHWID(n) (0x4c + (0x4 * (n))) +#define BHI_OEMPKHASH(n) (0x64 + (0x4 * (n))) +#define BHI_RSVD5 0xc4 + +/* BHI register bits */ +#define BHI_TXDB_SEQNUM_BMSK GENMASK(29, 0) +#define BHI_TXDB_SEQNUM_SHFT 0 +#define BHI_STATUS_MASK GENMASK(31, 30) +#define BHI_STATUS_ERROR 0x03 +#define BHI_STATUS_SUCCESS 0x02 +#define BHI_STATUS_RESET 0x00 + +/* MHI BHIE registers */ +#define BHIE_MSMSOCID_OFFS 0x00 +#define BHIE_TXVECADDR_LOW_OFFS 0x2c +#define BHIE_TXVECADDR_HIGH_OFFS 0x30 +#define BHIE_TXVECSIZE_OFFS 0x34 +#define BHIE_TXVECDB_OFFS 0x3c +#define BHIE_TXVECSTATUS_OFFS 0x44 +#define BHIE_RXVECADDR_LOW_OFFS 0x60 +#define BHIE_RXVECADDR_HIGH_OFFS 0x64 +#define BHIE_RXVECSIZE_OFFS 0x68 +#define BHIE_RXVECDB_OFFS 0x70 +#define BHIE_RXVECSTATUS_OFFS 0x78 + +/* BHIE register bits */ +#define BHIE_TXVECDB_SEQNUM_BMSK GENMASK(29, 0) +#define BHIE_TXVECDB_SEQNUM_SHFT 0 +#define BHIE_TXVECSTATUS_SEQNUM_BMSK GENMASK(29, 0) +#define BHIE_TXVECSTATUS_SEQNUM_SHFT 0 +#define BHIE_TXVECSTATUS_STATUS_BMSK GENMASK(31, 30) +#define BHIE_TXVECSTATUS_STATUS_SHFT 30 +#define BHIE_TXVECSTATUS_STATUS_RESET 0x00 +#define BHIE_TXVECSTATUS_STATUS_XFER_COMPL 0x02 +#define BHIE_TXVECSTATUS_STATUS_ERROR 0x03 +#define BHIE_RXVECDB_SEQNUM_BMSK GENMASK(29, 0) +#define BHIE_RXVECDB_SEQNUM_SHFT 0 +#define BHIE_RXVECSTATUS_SEQNUM_BMSK GENMASK(29, 0) +#define BHIE_RXVECSTATUS_SEQNUM_SHFT 0 +#define BHIE_RXVECSTATUS_STATUS_BMSK GENMASK(31, 30) +#define BHIE_RXVECSTATUS_STATUS_SHFT 30 +#define BHIE_RXVECSTATUS_STATUS_RESET 0x00 +#define BHIE_RXVECSTATUS_STATUS_XFER_COMPL 0x02 +#define BHIE_RXVECSTATUS_STATUS_ERROR 0x03 + +/* MHI register bits */ +#define MHICFG_NHWER_MASK GENMASK(31, 24) +#define MHICFG_NER_MASK GENMASK(23, 16) +#define MHICFG_NHWCH_MASK GENMASK(15, 8) +#define MHICFG_NCH_MASK GENMASK(7, 0) +#define MHICTRL_MHISTATE_MASK GENMASK(15, 8) +#define MHICTRL_RESET_MASK BIT(1) +#define MHISTATUS_MHISTATE_MASK GENMASK(15, 8) +#define MHISTATUS_SYSERR_MASK BIT(2) +#define MHISTATUS_READY_MASK BIT(0) + +/* Command Ring Element macros */ +/* No operation command */ +#define MHI_TRE_CMD_NOOP_PTR 0 +#define MHI_TRE_CMD_NOOP_DWORD0 0 +#define MHI_TRE_CMD_NOOP_DWORD1 cpu_to_le32(FIELD_PREP(GENMASK(23, 16), MHI_CMD_NOP)) + +/* Channel reset command */ +#define MHI_TRE_CMD_RESET_PTR 0 +#define MHI_TRE_CMD_RESET_DWORD0 0 +#define MHI_TRE_CMD_RESET_DWORD1(chid) cpu_to_le32(FIELD_PREP(GENMASK(31, 24), chid) | \ + FIELD_PREP(GENMASK(23, 16), \ + MHI_CMD_RESET_CHAN)) + +/* Channel stop command */ +#define MHI_TRE_CMD_STOP_PTR 0 +#define MHI_TRE_CMD_STOP_DWORD0 0 +#define MHI_TRE_CMD_STOP_DWORD1(chid) cpu_to_le32(FIELD_PREP(GENMASK(31, 24), chid) | \ + FIELD_PREP(GENMASK(23, 16), \ + MHI_CMD_STOP_CHAN)) + +/* Channel start command */ +#define MHI_TRE_CMD_START_PTR 0 +#define MHI_TRE_CMD_START_DWORD0 0 +#define MHI_TRE_CMD_START_DWORD1(chid) cpu_to_le32(FIELD_PREP(GENMASK(31, 24), chid) | \ + FIELD_PREP(GENMASK(23, 16), \ + MHI_CMD_START_CHAN)) + +#define MHI_TRE_GET_DWORD(tre, word) le32_to_cpu((tre)->dword[(word)]) +#define MHI_TRE_GET_CMD_CHID(tre) FIELD_GET(GENMASK(31, 24), MHI_TRE_GET_DWORD(tre, 1)) +#define MHI_TRE_GET_CMD_TYPE(tre) FIELD_GET(GENMASK(23, 16), MHI_TRE_GET_DWORD(tre, 1)) + +/* Event descriptor macros */ +#define MHI_TRE_EV_PTR(ptr) cpu_to_le64(ptr) +#define MHI_TRE_EV_DWORD0(code, len) cpu_to_le32(FIELD_PREP(GENMASK(31, 24), code) | \ + FIELD_PREP(GENMASK(15, 0), len)) +#define MHI_TRE_EV_DWORD1(chid, type) cpu_to_le32(FIELD_PREP(GENMASK(31, 24), chid) | \ + FIELD_PREP(GENMASK(23, 16), type)) +#define MHI_TRE_GET_EV_PTR(tre) le64_to_cpu((tre)->ptr) +#define MHI_TRE_GET_EV_CODE(tre) FIELD_GET(GENMASK(31, 24), (MHI_TRE_GET_DWORD(tre, 0))) +#define MHI_TRE_GET_EV_LEN(tre) FIELD_GET(GENMASK(15, 0), (MHI_TRE_GET_DWORD(tre, 0))) +#define MHI_TRE_GET_EV_CHID(tre) FIELD_GET(GENMASK(31, 24), (MHI_TRE_GET_DWORD(tre, 1))) +#define MHI_TRE_GET_EV_TYPE(tre) FIELD_GET(GENMASK(23, 16), (MHI_TRE_GET_DWORD(tre, 1))) +#define MHI_TRE_GET_EV_STATE(tre) FIELD_GET(GENMASK(31, 24), (MHI_TRE_GET_DWORD(tre, 0))) +#define MHI_TRE_GET_EV_EXECENV(tre) FIELD_GET(GENMASK(31, 24), (MHI_TRE_GET_DWORD(tre, 0))) +#define MHI_TRE_GET_EV_SEQ(tre) MHI_TRE_GET_DWORD(tre, 0) +#define MHI_TRE_GET_EV_TIME(tre) MHI_TRE_GET_EV_PTR(tre) +#define MHI_TRE_GET_EV_COOKIE(tre) lower_32_bits(MHI_TRE_GET_EV_PTR(tre)) +#define MHI_TRE_GET_EV_VEID(tre) FIELD_GET(GENMASK(23, 16), (MHI_TRE_GET_DWORD(tre, 0))) +#define MHI_TRE_GET_EV_LINKSPEED(tre) FIELD_GET(GENMASK(31, 24), (MHI_TRE_GET_DWORD(tre, 1))) +#define MHI_TRE_GET_EV_LINKWIDTH(tre) FIELD_GET(GENMASK(7, 0), (MHI_TRE_GET_DWORD(tre, 0))) + +<<<<<<< +======= +/* State change event */ +#define MHI_SC_EV_PTR 0 +#define MHI_SC_EV_DWORD0(state) cpu_to_le32(FIELD_PREP(GENMASK(31, 24), state)) +#define MHI_SC_EV_DWORD1(type) cpu_to_le32(FIELD_PREP(GENMASK(23, 16), type)) + +/* EE event */ +#define MHI_EE_EV_PTR 0 +#define MHI_EE_EV_DWORD0(ee) cpu_to_le32(FIELD_PREP(GENMASK(31, 24), ee)) +#define MHI_EE_EV_DWORD1(type) cpu_to_le32(FIELD_PREP(GENMASK(23, 16), type)) + + +/* Command Completion event */ +#define MHI_CC_EV_PTR(ptr) cpu_to_le64(ptr) +#define MHI_CC_EV_DWORD0(code) cpu_to_le32(FIELD_PREP(GENMASK(31, 24), code)) +#define MHI_CC_EV_DWORD1(type) cpu_to_le32(FIELD_PREP(GENMASK(23, 16), type)) + +>>>>>>> +/* Transfer descriptor macros */ +#define MHI_TRE_DATA_PTR(ptr) cpu_to_le64(ptr) +#define MHI_TRE_DATA_DWORD0(len) cpu_to_le32(FIELD_PREP(GENMASK(15, 0), len)) +#define MHI_TRE_TYPE_TRANSFER 2 +#define MHI_TRE_DATA_DWORD1(bei, ieot, ieob, chain) cpu_to_le32(FIELD_PREP(GENMASK(23, 16), \ + MHI_TRE_TYPE_TRANSFER) | \ + FIELD_PREP(BIT(10), bei) | \ + FIELD_PREP(BIT(9), ieot) | \ + FIELD_PREP(BIT(8), ieob) | \ + FIELD_PREP(BIT(0), chain)) +<<<<<<< +======= +#define MHI_TRE_DATA_GET_PTR(tre) le64_to_cpu((tre)->ptr) +#define MHI_TRE_DATA_GET_LEN(tre) FIELD_GET(GENMASK(15, 0), MHI_TRE_GET_DWORD(tre, 0)) +#define MHI_TRE_DATA_GET_CHAIN(tre) (!!(FIELD_GET(BIT(0), MHI_TRE_GET_DWORD(tre, 1)))) +#define MHI_TRE_DATA_GET_IEOB(tre) (!!(FIELD_GET(BIT(8), MHI_TRE_GET_DWORD(tre, 1)))) +#define MHI_TRE_DATA_GET_IEOT(tre) (!!(FIELD_GET(BIT(9), MHI_TRE_GET_DWORD(tre, 1)))) +#define MHI_TRE_DATA_GET_BEI(tre) (!!(FIELD_GET(BIT(10), MHI_TRE_GET_DWORD(tre, 1)))) +>>>>>>> + +/* RSC transfer descriptor macros */ +#define MHI_RSCTRE_DATA_PTR(ptr, len) cpu_to_le64(FIELD_PREP(GENMASK(64, 48), len) | ptr) +#define MHI_RSCTRE_DATA_DWORD0(cookie) cpu_to_le32(cookie) +#define MHI_RSCTRE_DATA_DWORD1 cpu_to_le32(FIELD_PREP(GENMASK(23, 16), \ + MHI_PKT_TYPE_COALESCING)) + +enum mhi_pkt_type { + MHI_PKT_TYPE_INVALID = 0x0, + MHI_PKT_TYPE_NOOP_CMD = 0x1, + MHI_PKT_TYPE_TRANSFER = 0x2, + MHI_PKT_TYPE_COALESCING = 0x8, + MHI_PKT_TYPE_RESET_CHAN_CMD = 0x10, + MHI_PKT_TYPE_STOP_CHAN_CMD = 0x11, + MHI_PKT_TYPE_START_CHAN_CMD = 0x12, + MHI_PKT_TYPE_STATE_CHANGE_EVENT = 0x20, + MHI_PKT_TYPE_CMD_COMPLETION_EVENT = 0x21, + MHI_PKT_TYPE_TX_EVENT = 0x22, + MHI_PKT_TYPE_RSC_TX_EVENT = 0x28, + MHI_PKT_TYPE_EE_EVENT = 0x40, + MHI_PKT_TYPE_TSYNC_EVENT = 0x48, + MHI_PKT_TYPE_BW_REQ_EVENT = 0x50, + MHI_PKT_TYPE_STALE_EVENT, /* internal event */ +}; + +/* MHI transfer completion events */ +enum mhi_ev_ccs { + MHI_EV_CC_INVALID = 0x0, + MHI_EV_CC_SUCCESS = 0x1, + MHI_EV_CC_EOT = 0x2, /* End of transfer event */ + MHI_EV_CC_OVERFLOW = 0x3, + MHI_EV_CC_EOB = 0x4, /* End of block event */ + MHI_EV_CC_OOB = 0x5, /* Out of block event */ + MHI_EV_CC_DB_MODE = 0x6, + MHI_EV_CC_UNDEFINED_ERR = 0x10, + MHI_EV_CC_BAD_TRE = 0x11, +}; + +/* Channel state */ +enum mhi_ch_state { + MHI_CH_STATE_DISABLED, + MHI_CH_STATE_ENABLED, + MHI_CH_STATE_RUNNING, + MHI_CH_STATE_SUSPENDED, + MHI_CH_STATE_STOP, + MHI_CH_STATE_ERROR, +}; + +enum mhi_cmd_type { + MHI_CMD_NOP = 1, + MHI_CMD_RESET_CHAN = 16, + MHI_CMD_STOP_CHAN = 17, + MHI_CMD_START_CHAN = 18, +}; + +#define EV_CTX_RESERVED_MASK GENMASK(7, 0) +#define EV_CTX_INTMODC_MASK GENMASK(15, 8) +#define EV_CTX_INTMODT_MASK GENMASK(31, 16) +struct mhi_event_ctxt { + __le32 intmod; + __le32 ertype; + __le32 msivec; + + __le64 rbase __packed __aligned(4); + __le64 rlen __packed __aligned(4); + __le64 rp __packed __aligned(4); + __le64 wp __packed __aligned(4); +}; + +#define CHAN_CTX_CHSTATE_MASK GENMASK(7, 0) +#define CHAN_CTX_BRSTMODE_MASK GENMASK(9, 8) +#define CHAN_CTX_POLLCFG_MASK GENMASK(15, 10) +#define CHAN_CTX_RESERVED_MASK GENMASK(31, 16) +struct mhi_chan_ctxt { + __le32 chcfg; + __le32 chtype; + __le32 erindex; + + __le64 rbase __packed __aligned(4); + __le64 rlen __packed __aligned(4); + __le64 rp __packed __aligned(4); + __le64 wp __packed __aligned(4); +}; + +struct mhi_cmd_ctxt { + __le32 reserved0; + __le32 reserved1; + __le32 reserved2; + + __le64 rbase __packed __aligned(4); + __le64 rlen __packed __aligned(4); + __le64 rp __packed __aligned(4); + __le64 wp __packed __aligned(4); +}; + +struct mhi_ring_element { + __le64 ptr; + __le32 dword[2]; +}; + +<<<<<<< +static inline const char * const mhi_state_str(enum mhi_state state) +======= +static inline const char *mhi_state_str(enum mhi_state state) +>>>>>>> +{ + switch (state) { + case MHI_STATE_RESET: + return "RESET"; + case MHI_STATE_READY: + return "READY"; + case MHI_STATE_M0: + return "M0"; + case MHI_STATE_M1: + return "M1"; + case MHI_STATE_M2: + return "M2"; + case MHI_STATE_M3: + return "M3"; + case MHI_STATE_M3_FAST: + return "M3 FAST"; + case MHI_STATE_BHI: + return "BHI"; + case MHI_STATE_SYS_ERR: + return "SYS ERROR"; + default: + return "Unknown state"; + } +}; + +#endif /* _MHI_COMMON_H */ diff --git a/rr-cache/6541c1ada5c763f61289c3532803a0074f78d3f5/postimage b/rr-cache/6541c1ada5c763f61289c3532803a0074f78d3f5/postimage new file mode 100644 index 0000000..d0c7dce --- /dev/null +++ b/rr-cache/6541c1ada5c763f61289c3532803a0074f78d3f5/postimage @@ -0,0 +1,1626 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Qualcomm PCIe root complex driver + * + * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. + * Copyright 2015 Linaro Limited. + * + * Author: Stanimir Varbanov <svarbanov@mm-sol.com> + */ + +#include <linux/clk.h> +#include <linux/crc8.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/interconnect.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/pci.h> +#include <linux/pm_runtime.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> +#include <linux/regulator/consumer.h> +#include <linux/reset.h> +#include <linux/slab.h> +#include <linux/types.h> + +#include "../../pci.h" +#include "pcie-designware.h" + +#define PCIE20_PARF_SYS_CTRL 0x00 +#define MST_WAKEUP_EN BIT(13) +#define SLV_WAKEUP_EN BIT(12) +#define MSTR_ACLK_CGC_DIS BIT(10) +#define SLV_ACLK_CGC_DIS BIT(9) +#define CORE_CLK_CGC_DIS BIT(6) +#define AUX_PWR_DET BIT(4) +#define L23_CLK_RMV_DIS BIT(2) +#define L1_CLK_RMV_DIS BIT(1) + +#define PCIE20_PARF_PHY_CTRL 0x40 +#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK GENMASK(20, 16) +#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) ((x) << 16) + +#define PCIE20_PARF_PHY_REFCLK 0x4C +#define PHY_REFCLK_SSP_EN BIT(16) +#define PHY_REFCLK_USE_PAD BIT(12) + +#define PCIE20_PARF_DBI_BASE_ADDR 0x168 +#define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16C +#define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174 +#define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178 +#define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1A8 +#define PCIE20_PARF_LTSSM 0x1B0 +#define PCIE20_PARF_SID_OFFSET 0x234 +#define PCIE20_PARF_BDF_TRANSLATE_CFG 0x24C +#define PCIE20_PARF_DEVICE_TYPE 0x1000 +#define PCIE20_PARF_BDF_TO_SID_TABLE_N 0x2000 + +#define PCIE20_ELBI_SYS_CTRL 0x04 +#define PCIE20_ELBI_SYS_CTRL_LT_ENABLE BIT(0) + +#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0 0x818 +#define CFG_REMOTE_RD_REQ_BRIDGE_SIZE_2K 0x4 +#define CFG_REMOTE_RD_REQ_BRIDGE_SIZE_4K 0x5 +#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c +#define CFG_BRIDGE_SB_INIT BIT(0) + +#define PCIE_CAP_LINK1_VAL 0x2FD7F + +#define PCIE20_PARF_Q2A_FLUSH 0x1AC + +#define PCIE20_MISC_CONTROL_1_REG 0x8BC +#define DBI_RO_WR_EN 1 + +#define PERST_DELAY_US 1000 +/* PARF registers */ +#define PCIE20_PARF_PCS_DEEMPH 0x34 +#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) ((x) << 16) +#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) ((x) << 8) +#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) ((x) << 0) + +#define PCIE20_PARF_PCS_SWING 0x38 +#define PCS_SWING_TX_SWING_FULL(x) ((x) << 8) +#define PCS_SWING_TX_SWING_LOW(x) ((x) << 0) + +#define PCIE20_PARF_CONFIG_BITS 0x50 +#define PHY_RX0_EQ(x) ((x) << 24) + +#define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358 +#define SLV_ADDR_SPACE_SZ 0x10000000 + +#define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xa0 + +#define DEVICE_TYPE_RC 0x4 + +#define QCOM_PCIE_2_1_0_MAX_SUPPLY 3 +#define QCOM_PCIE_2_1_0_MAX_CLOCKS 5 + +#define QCOM_PCIE_CRC8_POLYNOMIAL (BIT(2) | BIT(1) | BIT(0)) + +struct qcom_pcie_resources_2_1_0 { + struct clk_bulk_data clks[QCOM_PCIE_2_1_0_MAX_CLOCKS]; + struct reset_control *pci_reset; + struct reset_control *axi_reset; + struct reset_control *ahb_reset; + struct reset_control *por_reset; + struct reset_control *phy_reset; + struct reset_control *ext_reset; + struct regulator_bulk_data supplies[QCOM_PCIE_2_1_0_MAX_SUPPLY]; +}; + +struct qcom_pcie_resources_1_0_0 { + struct clk *iface; + struct clk *aux; + struct clk *master_bus; + struct clk *slave_bus; + struct reset_control *core; + struct regulator *vdda; +}; + +#define QCOM_PCIE_2_3_2_MAX_SUPPLY 2 +struct qcom_pcie_resources_2_3_2 { + struct clk *aux_clk; + struct clk *master_clk; + struct clk *slave_clk; + struct clk *cfg_clk; + struct regulator_bulk_data supplies[QCOM_PCIE_2_3_2_MAX_SUPPLY]; +}; + +#define QCOM_PCIE_2_4_0_MAX_CLOCKS 4 +struct qcom_pcie_resources_2_4_0 { + struct clk_bulk_data clks[QCOM_PCIE_2_4_0_MAX_CLOCKS]; + int num_clks; + struct reset_control *axi_m_reset; + struct reset_control *axi_s_reset; + struct reset_control *pipe_reset; + struct reset_control *axi_m_vmid_reset; + struct reset_control *axi_s_xpu_reset; + struct reset_control *parf_reset; + struct reset_control *phy_reset; + struct reset_control *axi_m_sticky_reset; + struct reset_control *pipe_sticky_reset; + struct reset_control *pwr_reset; + struct reset_control *ahb_reset; + struct reset_control *phy_ahb_reset; +}; + +struct qcom_pcie_resources_2_3_3 { + struct clk *iface; + struct clk *axi_m_clk; + struct clk *axi_s_clk; + struct clk *ahb_clk; + struct clk *aux_clk; + struct reset_control *rst[7]; +}; + +/* 6 clocks typically, 7 for sm8250 */ +struct qcom_pcie_resources_2_7_0 { + struct clk_bulk_data clks[9]; + int num_clks; + struct regulator_bulk_data supplies[2]; + struct reset_control *pci_reset; + struct clk *pipe_clk_src; + struct clk *phy_pipe_clk; + struct clk *ref_clk_src; + struct icc_path *path; +}; + +union qcom_pcie_resources { + struct qcom_pcie_resources_1_0_0 v1_0_0; + struct qcom_pcie_resources_2_1_0 v2_1_0; + struct qcom_pcie_resources_2_3_2 v2_3_2; + struct qcom_pcie_resources_2_3_3 v2_3_3; + struct qcom_pcie_resources_2_4_0 v2_4_0; + struct qcom_pcie_resources_2_7_0 v2_7_0; +}; + +struct qcom_pcie; + +struct qcom_pcie_ops { + int (*get_resources)(struct qcom_pcie *pcie); + int (*init)(struct qcom_pcie *pcie); + void (*deinit)(struct qcom_pcie *pcie); + void (*ltssm_enable)(struct qcom_pcie *pcie); + int (*config_sid)(struct qcom_pcie *pcie); +}; + +struct qcom_pcie_cfg { + const struct qcom_pcie_ops *ops; + unsigned int pipe_clk_need_muxing:1; + unsigned int has_tbu_clk:1; + unsigned int has_ddrss_sf_tbu_clk:1; + unsigned int has_aggre0_clk:1; + unsigned int has_aggre1_clk:1; +}; + +struct qcom_pcie { + struct dw_pcie *pci; + void __iomem *parf; /* DT parf */ + void __iomem *elbi; /* DT elbi */ + union qcom_pcie_resources res; + struct phy *phy; + struct gpio_desc *reset; + const struct qcom_pcie_cfg *cfg; +}; + +#define to_qcom_pcie(x) dev_get_drvdata((x)->dev) + +static void qcom_ep_reset_assert(struct qcom_pcie *pcie) +{ + gpiod_set_value_cansleep(pcie->reset, 1); + usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500); +} + +static void qcom_ep_reset_deassert(struct qcom_pcie *pcie) +{ + /* Ensure that PERST has been asserted for at least 100 ms */ + msleep(100); + gpiod_set_value_cansleep(pcie->reset, 0); + usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500); +} + +static int qcom_pcie_start_link(struct dw_pcie *pci) +{ + struct qcom_pcie *pcie = to_qcom_pcie(pci); + + /* Enable Link Training state machine */ + if (pcie->cfg->ops->ltssm_enable) + pcie->cfg->ops->ltssm_enable(pcie); + + return 0; +} + +static void qcom_pcie_2_1_0_ltssm_enable(struct qcom_pcie *pcie) +{ + u32 val; + + /* enable link training */ + val = readl(pcie->elbi + PCIE20_ELBI_SYS_CTRL); + val |= PCIE20_ELBI_SYS_CTRL_LT_ENABLE; + writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL); +} + +static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + int ret; + + res->supplies[0].supply = "vdda"; + res->supplies[1].supply = "vdda_phy"; + res->supplies[2].supply = "vdda_refclk"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(res->supplies), + res->supplies); + if (ret) + return ret; + + res->clks[0].id = "iface"; + res->clks[1].id = "core"; + res->clks[2].id = "phy"; + res->clks[3].id = "aux"; + res->clks[4].id = "ref"; + + /* iface, core, phy are required */ + ret = devm_clk_bulk_get(dev, 3, res->clks); + if (ret < 0) + return ret; + + /* aux, ref are optional */ + ret = devm_clk_bulk_get_optional(dev, 2, res->clks + 3); + if (ret < 0) + return ret; + + res->pci_reset = devm_reset_control_get_exclusive(dev, "pci"); + if (IS_ERR(res->pci_reset)) + return PTR_ERR(res->pci_reset); + + res->axi_reset = devm_reset_control_get_exclusive(dev, "axi"); + if (IS_ERR(res->axi_reset)) + return PTR_ERR(res->axi_reset); + + res->ahb_reset = devm_reset_control_get_exclusive(dev, "ahb"); + if (IS_ERR(res->ahb_reset)) + return PTR_ERR(res->ahb_reset); + + res->por_reset = devm_reset_control_get_exclusive(dev, "por"); + if (IS_ERR(res->por_reset)) + return PTR_ERR(res->por_reset); + + res->ext_reset = devm_reset_control_get_optional_exclusive(dev, "ext"); + if (IS_ERR(res->ext_reset)) + return PTR_ERR(res->ext_reset); + + res->phy_reset = devm_reset_control_get_exclusive(dev, "phy"); + return PTR_ERR_OR_ZERO(res->phy_reset); +} + +static void qcom_pcie_deinit_2_1_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0; + + clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); + reset_control_assert(res->pci_reset); + reset_control_assert(res->axi_reset); + reset_control_assert(res->ahb_reset); + reset_control_assert(res->por_reset); + reset_control_assert(res->ext_reset); + reset_control_assert(res->phy_reset); + + writel(1, pcie->parf + PCIE20_PARF_PHY_CTRL); + + regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); +} + +static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + struct device_node *node = dev->of_node; + u32 val; + int ret; + + /* reset the PCIe interface as uboot can leave it undefined state */ + reset_control_assert(res->pci_reset); + reset_control_assert(res->axi_reset); + reset_control_assert(res->ahb_reset); + reset_control_assert(res->por_reset); + reset_control_assert(res->ext_reset); + reset_control_assert(res->phy_reset); + + writel(1, pcie->parf + PCIE20_PARF_PHY_CTRL); + + ret = regulator_bulk_enable(ARRAY_SIZE(res->supplies), res->supplies); + if (ret < 0) { + dev_err(dev, "cannot enable regulators\n"); + return ret; + } + + ret = reset_control_deassert(res->ahb_reset); + if (ret) { + dev_err(dev, "cannot deassert ahb reset\n"); + goto err_deassert_ahb; + } + + ret = reset_control_deassert(res->ext_reset); + if (ret) { + dev_err(dev, "cannot deassert ext reset\n"); + goto err_deassert_ext; + } + + ret = reset_control_deassert(res->phy_reset); + if (ret) { + dev_err(dev, "cannot deassert phy reset\n"); + goto err_deassert_phy; + } + + ret = reset_control_deassert(res->pci_reset); + if (ret) { + dev_err(dev, "cannot deassert pci reset\n"); + goto err_deassert_pci; + } + + ret = reset_control_deassert(res->por_reset); + if (ret) { + dev_err(dev, "cannot deassert por reset\n"); + goto err_deassert_por; + } + + ret = reset_control_deassert(res->axi_reset); + if (ret) { + dev_err(dev, "cannot deassert axi reset\n"); + goto err_deassert_axi; + } + + ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); + if (ret) + goto err_clks; + + /* enable PCIe clocks and resets */ + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); + val &= ~BIT(0); + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); + + if (of_device_is_compatible(node, "qcom,pcie-ipq8064") || + of_device_is_compatible(node, "qcom,pcie-ipq8064-v2")) { + writel(PCS_DEEMPH_TX_DEEMPH_GEN1(24) | + PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(24) | + PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(34), + pcie->parf + PCIE20_PARF_PCS_DEEMPH); + writel(PCS_SWING_TX_SWING_FULL(120) | + PCS_SWING_TX_SWING_LOW(120), + pcie->parf + PCIE20_PARF_PCS_SWING); + writel(PHY_RX0_EQ(4), pcie->parf + PCIE20_PARF_CONFIG_BITS); + } + + if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) { + /* set TX termination offset */ + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); + val &= ~PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK; + val |= PHY_CTRL_PHY_TX0_TERM_OFFSET(7); + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); + } + + /* enable external reference clock */ + val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK); + /* USE_PAD is required only for ipq806x */ + if (!of_device_is_compatible(node, "qcom,pcie-apq8064")) + val &= ~PHY_REFCLK_USE_PAD; + val |= PHY_REFCLK_SSP_EN; + writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK); + + /* wait for clock acquisition */ + usleep_range(1000, 1500); + + /* Set the Max TLP size to 2K, instead of using default of 4K */ + writel(CFG_REMOTE_RD_REQ_BRIDGE_SIZE_2K, + pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL0); + writel(CFG_BRIDGE_SB_INIT, + pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1); + + return 0; + +err_clks: + reset_control_assert(res->axi_reset); +err_deassert_axi: + reset_control_assert(res->por_reset); +err_deassert_por: + reset_control_assert(res->pci_reset); +err_deassert_pci: + reset_control_assert(res->phy_reset); +err_deassert_phy: + reset_control_assert(res->ext_reset); +err_deassert_ext: + reset_control_assert(res->ahb_reset); +err_deassert_ahb: + regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); + + return ret; +} + +static int qcom_pcie_get_resources_1_0_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_1_0_0 *res = &pcie->res.v1_0_0; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + + res->vdda = devm_regulator_get(dev, "vdda"); + if (IS_ERR(res->vdda)) + return PTR_ERR(res->vdda); + + res->iface = devm_clk_get(dev, "iface"); + if (IS_ERR(res->iface)) + return PTR_ERR(res->iface); + + res->aux = devm_clk_get(dev, "aux"); + if (IS_ERR(res->aux)) + return PTR_ERR(res->aux); + + res->master_bus = devm_clk_get(dev, "master_bus"); + if (IS_ERR(res->master_bus)) + return PTR_ERR(res->master_bus); + + res->slave_bus = devm_clk_get(dev, "slave_bus"); + if (IS_ERR(res->slave_bus)) + return PTR_ERR(res->slave_bus); + + res->core = devm_reset_control_get_exclusive(dev, "core"); + return PTR_ERR_OR_ZERO(res->core); +} + +static void qcom_pcie_deinit_1_0_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_1_0_0 *res = &pcie->res.v1_0_0; + + reset_control_assert(res->core); + clk_disable_unprepare(res->slave_bus); + clk_disable_unprepare(res->master_bus); + clk_disable_unprepare(res->iface); + clk_disable_unprepare(res->aux); + regulator_disable(res->vdda); +} + +static int qcom_pcie_init_1_0_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_1_0_0 *res = &pcie->res.v1_0_0; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + int ret; + + ret = reset_control_deassert(res->core); + if (ret) { + dev_err(dev, "cannot deassert core reset\n"); + return ret; + } + + ret = clk_prepare_enable(res->aux); + if (ret) { + dev_err(dev, "cannot prepare/enable aux clock\n"); + goto err_res; + } + + ret = clk_prepare_enable(res->iface); + if (ret) { + dev_err(dev, "cannot prepare/enable iface clock\n"); + goto err_aux; + } + + ret = clk_prepare_enable(res->master_bus); + if (ret) { + dev_err(dev, "cannot prepare/enable master_bus clock\n"); + goto err_iface; + } + + ret = clk_prepare_enable(res->slave_bus); + if (ret) { + dev_err(dev, "cannot prepare/enable slave_bus clock\n"); + goto err_master; + } + + ret = regulator_enable(res->vdda); + if (ret) { + dev_err(dev, "cannot enable vdda regulator\n"); + goto err_slave; + } + + /* change DBI base address */ + writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR); + + if (IS_ENABLED(CONFIG_PCI_MSI)) { + u32 val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT); + + val |= BIT(31); + writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT); + } + + return 0; +err_slave: + clk_disable_unprepare(res->slave_bus); +err_master: + clk_disable_unprepare(res->master_bus); +err_iface: + clk_disable_unprepare(res->iface); +err_aux: + clk_disable_unprepare(res->aux); +err_res: + reset_control_assert(res->core); + + return ret; +} + +static void qcom_pcie_2_3_2_ltssm_enable(struct qcom_pcie *pcie) +{ + u32 val; + + /* enable link training */ + val = readl(pcie->parf + PCIE20_PARF_LTSSM); + val |= BIT(8); + writel(val, pcie->parf + PCIE20_PARF_LTSSM); +} + +static int qcom_pcie_get_resources_2_3_2(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + int ret; + + res->supplies[0].supply = "vdda"; + res->supplies[1].supply = "vddpe-3v3"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(res->supplies), + res->supplies); + if (ret) + return ret; + + res->aux_clk = devm_clk_get(dev, "aux"); + if (IS_ERR(res->aux_clk)) + return PTR_ERR(res->aux_clk); + + res->cfg_clk = devm_clk_get(dev, "cfg"); + if (IS_ERR(res->cfg_clk)) + return PTR_ERR(res->cfg_clk); + + res->master_clk = devm_clk_get(dev, "bus_master"); + if (IS_ERR(res->master_clk)) + return PTR_ERR(res->master_clk); + + res->slave_clk = devm_clk_get(dev, "bus_slave"); + return PTR_ERR_OR_ZERO(res->slave_clk); +} + +static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2; + + clk_disable_unprepare(res->slave_clk); + clk_disable_unprepare(res->master_clk); + clk_disable_unprepare(res->cfg_clk); + clk_disable_unprepare(res->aux_clk); + + regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); +} + +static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + u32 val; + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(res->supplies), res->supplies); + if (ret < 0) { + dev_err(dev, "cannot enable regulators\n"); + return ret; + } + + ret = clk_prepare_enable(res->aux_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable aux clock\n"); + goto err_aux_clk; + } + + ret = clk_prepare_enable(res->cfg_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable cfg clock\n"); + goto err_cfg_clk; + } + + ret = clk_prepare_enable(res->master_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable master clock\n"); + goto err_master_clk; + } + + ret = clk_prepare_enable(res->slave_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable slave clock\n"); + goto err_slave_clk; + } + + /* enable PCIe clocks and resets */ + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); + val &= ~BIT(0); + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); + + /* change DBI base address */ + writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR); + + /* MAC PHY_POWERDOWN MUX DISABLE */ + val = readl(pcie->parf + PCIE20_PARF_SYS_CTRL); + val &= ~BIT(29); + writel(val, pcie->parf + PCIE20_PARF_SYS_CTRL); + + val = readl(pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL); + val |= BIT(4); + writel(val, pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL); + + val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2); + val |= BIT(31); + writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2); + + return 0; + +err_slave_clk: + clk_disable_unprepare(res->master_clk); +err_master_clk: + clk_disable_unprepare(res->cfg_clk); +err_cfg_clk: + clk_disable_unprepare(res->aux_clk); + +err_aux_clk: + regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); + + return ret; +} + +static int qcom_pcie_get_resources_2_4_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + bool is_ipq = of_device_is_compatible(dev->of_node, "qcom,pcie-ipq4019"); + int ret; + + res->clks[0].id = "aux"; + res->clks[1].id = "master_bus"; + res->clks[2].id = "slave_bus"; + res->clks[3].id = "iface"; + + /* qcom,pcie-ipq4019 is defined without "iface" */ + res->num_clks = is_ipq ? 3 : 4; + + ret = devm_clk_bulk_get(dev, res->num_clks, res->clks); + if (ret < 0) + return ret; + + res->axi_m_reset = devm_reset_control_get_exclusive(dev, "axi_m"); + if (IS_ERR(res->axi_m_reset)) + return PTR_ERR(res->axi_m_reset); + + res->axi_s_reset = devm_reset_control_get_exclusive(dev, "axi_s"); + if (IS_ERR(res->axi_s_reset)) + return PTR_ERR(res->axi_s_reset); + + if (is_ipq) { + /* + * These resources relates to the PHY or are secure clocks, but + * are controlled here for IPQ4019 + */ + res->pipe_reset = devm_reset_control_get_exclusive(dev, "pipe"); + if (IS_ERR(res->pipe_reset)) + return PTR_ERR(res->pipe_reset); + + res->axi_m_vmid_reset = devm_reset_control_get_exclusive(dev, + "axi_m_vmid"); + if (IS_ERR(res->axi_m_vmid_reset)) + return PTR_ERR(res->axi_m_vmid_reset); + + res->axi_s_xpu_reset = devm_reset_control_get_exclusive(dev, + "axi_s_xpu"); + if (IS_ERR(res->axi_s_xpu_reset)) + return PTR_ERR(res->axi_s_xpu_reset); + + res->parf_reset = devm_reset_control_get_exclusive(dev, "parf"); + if (IS_ERR(res->parf_reset)) + return PTR_ERR(res->parf_reset); + + res->phy_reset = devm_reset_control_get_exclusive(dev, "phy"); + if (IS_ERR(res->phy_reset)) + return PTR_ERR(res->phy_reset); + } + + res->axi_m_sticky_reset = devm_reset_control_get_exclusive(dev, + "axi_m_sticky"); + if (IS_ERR(res->axi_m_sticky_reset)) + return PTR_ERR(res->axi_m_sticky_reset); + + res->pipe_sticky_reset = devm_reset_control_get_exclusive(dev, + "pipe_sticky"); + if (IS_ERR(res->pipe_sticky_reset)) + return PTR_ERR(res->pipe_sticky_reset); + + res->pwr_reset = devm_reset_control_get_exclusive(dev, "pwr"); + if (IS_ERR(res->pwr_reset)) + return PTR_ERR(res->pwr_reset); + + res->ahb_reset = devm_reset_control_get_exclusive(dev, "ahb"); + if (IS_ERR(res->ahb_reset)) + return PTR_ERR(res->ahb_reset); + + if (is_ipq) { + res->phy_ahb_reset = devm_reset_control_get_exclusive(dev, "phy_ahb"); + if (IS_ERR(res->phy_ahb_reset)) + return PTR_ERR(res->phy_ahb_reset); + } + + return 0; +} + +static void qcom_pcie_deinit_2_4_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0; + + reset_control_assert(res->axi_m_reset); + reset_control_assert(res->axi_s_reset); + reset_control_assert(res->pipe_reset); + reset_control_assert(res->pipe_sticky_reset); + reset_control_assert(res->phy_reset); + reset_control_assert(res->phy_ahb_reset); + reset_control_assert(res->axi_m_sticky_reset); + reset_control_assert(res->pwr_reset); + reset_control_assert(res->ahb_reset); + clk_bulk_disable_unprepare(res->num_clks, res->clks); +} + +static int qcom_pcie_init_2_4_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + u32 val; + int ret; + + ret = reset_control_assert(res->axi_m_reset); + if (ret) { + dev_err(dev, "cannot assert axi master reset\n"); + return ret; + } + + ret = reset_control_assert(res->axi_s_reset); + if (ret) { + dev_err(dev, "cannot assert axi slave reset\n"); + return ret; + } + + usleep_range(10000, 12000); + + ret = reset_control_assert(res->pipe_reset); + if (ret) { + dev_err(dev, "cannot assert pipe reset\n"); + return ret; + } + + ret = reset_control_assert(res->pipe_sticky_reset); + if (ret) { + dev_err(dev, "cannot assert pipe sticky reset\n"); + return ret; + } + + ret = reset_control_assert(res->phy_reset); + if (ret) { + dev_err(dev, "cannot assert phy reset\n"); + return ret; + } + + ret = reset_control_assert(res->phy_ahb_reset); + if (ret) { + dev_err(dev, "cannot assert phy ahb reset\n"); + return ret; + } + + usleep_range(10000, 12000); + + ret = reset_control_assert(res->axi_m_sticky_reset); + if (ret) { + dev_err(dev, "cannot assert axi master sticky reset\n"); + return ret; + } + + ret = reset_control_assert(res->pwr_reset); + if (ret) { + dev_err(dev, "cannot assert power reset\n"); + return ret; + } + + ret = reset_control_assert(res->ahb_reset); + if (ret) { + dev_err(dev, "cannot assert ahb reset\n"); + return ret; + } + + usleep_range(10000, 12000); + + ret = reset_control_deassert(res->phy_ahb_reset); + if (ret) { + dev_err(dev, "cannot deassert phy ahb reset\n"); + return ret; + } + + ret = reset_control_deassert(res->phy_reset); + if (ret) { + dev_err(dev, "cannot deassert phy reset\n"); + goto err_rst_phy; + } + + ret = reset_control_deassert(res->pipe_reset); + if (ret) { + dev_err(dev, "cannot deassert pipe reset\n"); + goto err_rst_pipe; + } + + ret = reset_control_deassert(res->pipe_sticky_reset); + if (ret) { + dev_err(dev, "cannot deassert pipe sticky reset\n"); + goto err_rst_pipe_sticky; + } + + usleep_range(10000, 12000); + + ret = reset_control_deassert(res->axi_m_reset); + if (ret) { + dev_err(dev, "cannot deassert axi master reset\n"); + goto err_rst_axi_m; + } + + ret = reset_control_deassert(res->axi_m_sticky_reset); + if (ret) { + dev_err(dev, "cannot deassert axi master sticky reset\n"); + goto err_rst_axi_m_sticky; + } + + ret = reset_control_deassert(res->axi_s_reset); + if (ret) { + dev_err(dev, "cannot deassert axi slave reset\n"); + goto err_rst_axi_s; + } + + ret = reset_control_deassert(res->pwr_reset); + if (ret) { + dev_err(dev, "cannot deassert power reset\n"); + goto err_rst_pwr; + } + + ret = reset_control_deassert(res->ahb_reset); + if (ret) { + dev_err(dev, "cannot deassert ahb reset\n"); + goto err_rst_ahb; + } + + usleep_range(10000, 12000); + + ret = clk_bulk_prepare_enable(res->num_clks, res->clks); + if (ret) + goto err_clks; + + /* enable PCIe clocks and resets */ + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); + val &= ~BIT(0); + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); + + /* change DBI base address */ + writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR); + + /* MAC PHY_POWERDOWN MUX DISABLE */ + val = readl(pcie->parf + PCIE20_PARF_SYS_CTRL); + val &= ~BIT(29); + writel(val, pcie->parf + PCIE20_PARF_SYS_CTRL); + + val = readl(pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL); + val |= BIT(4); + writel(val, pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL); + + val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2); + val |= BIT(31); + writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2); + + return 0; + +err_clks: + reset_control_assert(res->ahb_reset); +err_rst_ahb: + reset_control_assert(res->pwr_reset); +err_rst_pwr: + reset_control_assert(res->axi_s_reset); +err_rst_axi_s: + reset_control_assert(res->axi_m_sticky_reset); +err_rst_axi_m_sticky: + reset_control_assert(res->axi_m_reset); +err_rst_axi_m: + reset_control_assert(res->pipe_sticky_reset); +err_rst_pipe_sticky: + reset_control_assert(res->pipe_reset); +err_rst_pipe: + reset_control_assert(res->phy_reset); +err_rst_phy: + reset_control_assert(res->phy_ahb_reset); + return ret; +} + +static int qcom_pcie_get_resources_2_3_3(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + int i; + const char *rst_names[] = { "axi_m", "axi_s", "pipe", + "axi_m_sticky", "sticky", + "ahb", "sleep", }; + + res->iface = devm_clk_get(dev, "iface"); + if (IS_ERR(res->iface)) + return PTR_ERR(res->iface); + + res->axi_m_clk = devm_clk_get(dev, "axi_m"); + if (IS_ERR(res->axi_m_clk)) + return PTR_ERR(res->axi_m_clk); + + res->axi_s_clk = devm_clk_get(dev, "axi_s"); + if (IS_ERR(res->axi_s_clk)) + return PTR_ERR(res->axi_s_clk); + + res->ahb_clk = devm_clk_get(dev, "ahb"); + if (IS_ERR(res->ahb_clk)) + return PTR_ERR(res->ahb_clk); + + res->aux_clk = devm_clk_get(dev, "aux"); + if (IS_ERR(res->aux_clk)) + return PTR_ERR(res->aux_clk); + + for (i = 0; i < ARRAY_SIZE(rst_names); i++) { + res->rst[i] = devm_reset_control_get(dev, rst_names[i]); + if (IS_ERR(res->rst[i])) + return PTR_ERR(res->rst[i]); + } + + return 0; +} + +static void qcom_pcie_deinit_2_3_3(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3; + + clk_disable_unprepare(res->iface); + clk_disable_unprepare(res->axi_m_clk); + clk_disable_unprepare(res->axi_s_clk); + clk_disable_unprepare(res->ahb_clk); + clk_disable_unprepare(res->aux_clk); +} + +static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); + int i, ret; + u32 val; + + for (i = 0; i < ARRAY_SIZE(res->rst); i++) { + ret = reset_control_assert(res->rst[i]); + if (ret) { + dev_err(dev, "reset #%d assert failed (%d)\n", i, ret); + return ret; + } + } + + usleep_range(2000, 2500); + + for (i = 0; i < ARRAY_SIZE(res->rst); i++) { + ret = reset_control_deassert(res->rst[i]); + if (ret) { + dev_err(dev, "reset #%d deassert failed (%d)\n", i, + ret); + return ret; + } + } + + /* + * Don't have a way to see if the reset has completed. + * Wait for some time. + */ + usleep_range(2000, 2500); + + ret = clk_prepare_enable(res->iface); + if (ret) { + dev_err(dev, "cannot prepare/enable core clock\n"); + goto err_clk_iface; + } + + ret = clk_prepare_enable(res->axi_m_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable core clock\n"); + goto err_clk_axi_m; + } + + ret = clk_prepare_enable(res->axi_s_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable axi slave clock\n"); + goto err_clk_axi_s; + } + + ret = clk_prepare_enable(res->ahb_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable ahb clock\n"); + goto err_clk_ahb; + } + + ret = clk_prepare_enable(res->aux_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable aux clock\n"); + goto err_clk_aux; + } + + writel(SLV_ADDR_SPACE_SZ, + pcie->parf + PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE); + + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); + val &= ~BIT(0); + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); + + writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR); + + writel(MST_WAKEUP_EN | SLV_WAKEUP_EN | MSTR_ACLK_CGC_DIS + | SLV_ACLK_CGC_DIS | CORE_CLK_CGC_DIS | + AUX_PWR_DET | L23_CLK_RMV_DIS | L1_CLK_RMV_DIS, + pcie->parf + PCIE20_PARF_SYS_CTRL); + writel(0, pcie->parf + PCIE20_PARF_Q2A_FLUSH); + + writel(PCI_COMMAND_MASTER, pci->dbi_base + PCI_COMMAND); + writel(DBI_RO_WR_EN, pci->dbi_base + PCIE20_MISC_CONTROL_1_REG); + writel(PCIE_CAP_LINK1_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP); + + val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP); + val &= ~PCI_EXP_LNKCAP_ASPMS; + writel(val, pci->dbi_base + offset + PCI_EXP_LNKCAP); + + writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset + + PCI_EXP_DEVCTL2); + + return 0; + +err_clk_aux: + clk_disable_unprepare(res->ahb_clk); +err_clk_ahb: + clk_disable_unprepare(res->axi_s_clk); +err_clk_axi_s: + clk_disable_unprepare(res->axi_m_clk); +err_clk_axi_m: + clk_disable_unprepare(res->iface); +err_clk_iface: + /* + * Not checking for failure, will anyway return + * the original failure in 'ret'. + */ + for (i = 0; i < ARRAY_SIZE(res->rst); i++) + reset_control_assert(res->rst[i]); + + return ret; +} + +static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + unsigned int idx; + int ret; + + res->pci_reset = devm_reset_control_get_exclusive(dev, "pci"); + if (IS_ERR(res->pci_reset)) + return PTR_ERR(res->pci_reset); + + res->path = devm_of_icc_get(dev, "pci"); + if (IS_ERR(res->path)) + return PTR_ERR(res->path); + + res->supplies[0].supply = "vdda"; + res->supplies[1].supply = "vddpe-3v3"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(res->supplies), + res->supplies); + if (ret) + return ret; + + idx = 0; + res->clks[idx++].id = "aux"; + res->clks[idx++].id = "cfg"; + res->clks[idx++].id = "bus_master"; + res->clks[idx++].id = "bus_slave"; + res->clks[idx++].id = "slave_q2a"; + if (pcie->cfg->has_tbu_clk) + res->clks[idx++].id = "tbu"; + if (pcie->cfg->has_ddrss_sf_tbu_clk) + res->clks[idx++].id = "ddrss_sf_tbu"; + if (pcie->cfg->has_aggre0_clk) + res->clks[idx++].id = "aggre0"; + if (pcie->cfg->has_aggre1_clk) + res->clks[idx++].id = "aggre1"; + + res->num_clks = idx; + + ret = devm_clk_bulk_get(dev, res->num_clks, res->clks); + if (ret < 0) + return ret; + + if (pcie->cfg->pipe_clk_need_muxing) { + res->pipe_clk_src = devm_clk_get(dev, "pipe_mux"); + if (IS_ERR(res->pipe_clk_src)) + return PTR_ERR(res->pipe_clk_src); + + res->phy_pipe_clk = devm_clk_get(dev, "phy_pipe"); + if (IS_ERR(res->phy_pipe_clk)) + return PTR_ERR(res->phy_pipe_clk); + + res->ref_clk_src = devm_clk_get(dev, "ref"); + if (IS_ERR(res->ref_clk_src)) + return PTR_ERR(res->ref_clk_src); + + /* Ensure that the TCXO is a clock source for pcie_pipe_clk_src */ + clk_set_parent(res->pipe_clk_src, res->ref_clk_src); + } + + return 0; +} + +static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + u32 val; + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(res->supplies), res->supplies); + if (ret < 0) { + dev_err(dev, "cannot enable regulators\n"); + return ret; + } + + /* Set pipe clock as clock source for pcie_pipe_clk_src */ + if (pcie->cfg->pipe_clk_need_muxing) + clk_set_parent(res->pipe_clk_src, res->phy_pipe_clk); + + if (res->path) + icc_set_bw(res->path, 500, 800); + + ret = clk_bulk_prepare_enable(res->num_clks, res->clks); + if (ret < 0) + goto err_disable_regulators; + + ret = reset_control_assert(res->pci_reset); + if (ret < 0) { + dev_err(dev, "cannot deassert pci reset\n"); + goto err_disable_clocks; + } + + usleep_range(1000, 1500); + + ret = reset_control_deassert(res->pci_reset); + if (ret < 0) { + dev_err(dev, "cannot deassert pci reset\n"); + goto err_disable_clocks; + } + + /* Wait for reset to complete, required on SM8450 */ + usleep_range(1000, 1500); + + /* Wait for reset to complete, required on SM8450 */ + usleep_range(1000, 1500); + + /* configure PCIe to RC mode */ + writel(DEVICE_TYPE_RC, pcie->parf + PCIE20_PARF_DEVICE_TYPE); + + /* enable PCIe clocks and resets */ + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); + val &= ~BIT(0); + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); + + /* change DBI base address */ + writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR); + + /* MAC PHY_POWERDOWN MUX DISABLE */ + val = readl(pcie->parf + PCIE20_PARF_SYS_CTRL); + val &= ~BIT(29); + writel(val, pcie->parf + PCIE20_PARF_SYS_CTRL); + + val = readl(pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL); + val |= BIT(4); + writel(val, pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL); + + if (IS_ENABLED(CONFIG_PCI_MSI)) { + val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT); + val |= BIT(31); + writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT); + } + + return 0; +err_disable_clocks: + clk_bulk_disable_unprepare(res->num_clks, res->clks); +err_disable_regulators: + regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); + + return ret; +} + +static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; + + clk_bulk_disable_unprepare(res->num_clks, res->clks); + if (res->path) + icc_set_bw(res->path, 0, 0); + + /* Set TCXO as clock source for pcie_pipe_clk_src */ + if (pcie->cfg->pipe_clk_need_muxing) + clk_set_parent(res->pipe_clk_src, res->ref_clk_src); + + regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); +} + +static int qcom_pcie_link_up(struct dw_pcie *pci) +{ + u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); + u16 val = readw(pci->dbi_base + offset + PCI_EXP_LNKSTA); + + return !!(val & PCI_EXP_LNKSTA_DLLLA); +} + +static int qcom_pcie_config_sid_sm8250(struct qcom_pcie *pcie) +{ + /* iommu map structure */ + struct { + u32 bdf; + u32 phandle; + u32 smmu_sid; + u32 smmu_sid_len; + } *map; + void __iomem *bdf_to_sid_base = pcie->parf + PCIE20_PARF_BDF_TO_SID_TABLE_N; + struct device *dev = pcie->pci->dev; + u8 qcom_pcie_crc8_table[CRC8_TABLE_SIZE]; + int i, nr_map, size = 0; + u32 smmu_sid_base; + + of_get_property(dev->of_node, "iommu-map", &size); + if (!size) + return 0; + + map = kzalloc(size, GFP_KERNEL); + if (!map) + return -ENOMEM; + + of_property_read_u32_array(dev->of_node, + "iommu-map", (u32 *)map, size / sizeof(u32)); + + nr_map = size / (sizeof(*map)); + + crc8_populate_msb(qcom_pcie_crc8_table, QCOM_PCIE_CRC8_POLYNOMIAL); + + /* Registers need to be zero out first */ + memset_io(bdf_to_sid_base, 0, CRC8_TABLE_SIZE * sizeof(u32)); + + /* Extract the SMMU SID base from the first entry of iommu-map */ + smmu_sid_base = map[0].smmu_sid; + + /* Look for an available entry to hold the mapping */ + for (i = 0; i < nr_map; i++) { + __be16 bdf_be = cpu_to_be16(map[i].bdf); + u32 val; + u8 hash; + + hash = crc8(qcom_pcie_crc8_table, (u8 *)&bdf_be, sizeof(bdf_be), + 0); + + val = readl(bdf_to_sid_base + hash * sizeof(u32)); + + /* If the register is already populated, look for next available entry */ + while (val) { + u8 current_hash = hash++; + u8 next_mask = 0xff; + + /* If NEXT field is NULL then update it with next hash */ + if (!(val & next_mask)) { + val |= (u32)hash; + writel(val, bdf_to_sid_base + current_hash * sizeof(u32)); + } + + val = readl(bdf_to_sid_base + hash * sizeof(u32)); + } + + /* BDF [31:16] | SID [15:8] | NEXT [7:0] */ + val = map[i].bdf << 16 | (map[i].smmu_sid - smmu_sid_base) << 8 | 0; + writel(val, bdf_to_sid_base + hash * sizeof(u32)); + } + + kfree(map); + + return 0; +} + +static int qcom_pcie_host_init(struct pcie_port *pp) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct qcom_pcie *pcie = to_qcom_pcie(pci); + int ret; + + qcom_ep_reset_assert(pcie); + + ret = pcie->cfg->ops->init(pcie); + if (ret) + return ret; + + ret = phy_power_on(pcie->phy); + if (ret) + goto err_deinit; + + qcom_ep_reset_deassert(pcie); + + if (pcie->cfg->ops->config_sid) { + ret = pcie->cfg->ops->config_sid(pcie); + if (ret) + goto err; + } + + return 0; + +err: + qcom_ep_reset_assert(pcie); + phy_power_off(pcie->phy); +err_deinit: + pcie->cfg->ops->deinit(pcie); + + return ret; +} + +static const struct dw_pcie_host_ops qcom_pcie_dw_ops = { + .host_init = qcom_pcie_host_init, +}; + +/* Qcom IP rev.: 2.1.0 Synopsys IP rev.: 4.01a */ +static const struct qcom_pcie_ops ops_2_1_0 = { + .get_resources = qcom_pcie_get_resources_2_1_0, + .init = qcom_pcie_init_2_1_0, + .deinit = qcom_pcie_deinit_2_1_0, + .ltssm_enable = qcom_pcie_2_1_0_ltssm_enable, +}; + +/* Qcom IP rev.: 1.0.0 Synopsys IP rev.: 4.11a */ +static const struct qcom_pcie_ops ops_1_0_0 = { + .get_resources = qcom_pcie_get_resources_1_0_0, + .init = qcom_pcie_init_1_0_0, + .deinit = qcom_pcie_deinit_1_0_0, + .ltssm_enable = qcom_pcie_2_1_0_ltssm_enable, +}; + +/* Qcom IP rev.: 2.3.2 Synopsys IP rev.: 4.21a */ +static const struct qcom_pcie_ops ops_2_3_2 = { + .get_resources = qcom_pcie_get_resources_2_3_2, + .init = qcom_pcie_init_2_3_2, + .deinit = qcom_pcie_deinit_2_3_2, + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, +}; + +/* Qcom IP rev.: 2.4.0 Synopsys IP rev.: 4.20a */ +static const struct qcom_pcie_ops ops_2_4_0 = { + .get_resources = qcom_pcie_get_resources_2_4_0, + .init = qcom_pcie_init_2_4_0, + .deinit = qcom_pcie_deinit_2_4_0, + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, +}; + +/* Qcom IP rev.: 2.3.3 Synopsys IP rev.: 4.30a */ +static const struct qcom_pcie_ops ops_2_3_3 = { + .get_resources = qcom_pcie_get_resources_2_3_3, + .init = qcom_pcie_init_2_3_3, + .deinit = qcom_pcie_deinit_2_3_3, + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, +}; + +/* Qcom IP rev.: 2.7.0 Synopsys IP rev.: 4.30a */ +static const struct qcom_pcie_ops ops_2_7_0 = { + .get_resources = qcom_pcie_get_resources_2_7_0, + .init = qcom_pcie_init_2_7_0, + .deinit = qcom_pcie_deinit_2_7_0, + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, +}; + +/* Qcom IP rev.: 1.9.0 */ +static const struct qcom_pcie_ops ops_1_9_0 = { + .get_resources = qcom_pcie_get_resources_2_7_0, + .init = qcom_pcie_init_2_7_0, + .deinit = qcom_pcie_deinit_2_7_0, + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, + .config_sid = qcom_pcie_config_sid_sm8250, +}; + +static const struct qcom_pcie_cfg apq8084_cfg = { + .ops = &ops_1_0_0, +}; + +static const struct qcom_pcie_cfg ipq8064_cfg = { + .ops = &ops_2_1_0, +}; + +static const struct qcom_pcie_cfg msm8996_cfg = { + .ops = &ops_2_3_2, +}; + +static const struct qcom_pcie_cfg ipq8074_cfg = { + .ops = &ops_2_3_3, +}; + +static const struct qcom_pcie_cfg ipq4019_cfg = { + .ops = &ops_2_4_0, +}; + +static const struct qcom_pcie_cfg sdm845_cfg = { + .ops = &ops_2_7_0, + .has_tbu_clk = true, +}; + +static const struct qcom_pcie_cfg sm8250_cfg = { + .ops = &ops_1_9_0, + .has_tbu_clk = true, + .has_ddrss_sf_tbu_clk = true, +}; + +static const struct qcom_pcie_cfg sm8450_pcie0_cfg = { + .ops = &ops_1_9_0, + .has_ddrss_sf_tbu_clk = true, + .pipe_clk_need_muxing = true, + .has_aggre0_clk = true, + .has_aggre1_clk = true, +}; + +static const struct qcom_pcie_cfg sm8450_pcie1_cfg = { + .ops = &ops_1_9_0, + .has_ddrss_sf_tbu_clk = true, + .pipe_clk_need_muxing = true, + .has_aggre1_clk = true, +}; + +static const struct qcom_pcie_cfg sc7280_cfg = { + .ops = &ops_1_9_0, + .has_tbu_clk = true, + .pipe_clk_need_muxing = true, +}; + +static const struct dw_pcie_ops dw_pcie_ops = { + .link_up = qcom_pcie_link_up, + .start_link = qcom_pcie_start_link, +}; + +static int qcom_pcie_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct pcie_port *pp; + struct dw_pcie *pci; + struct qcom_pcie *pcie; + int ret; + + pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); + if (!pcie) + return -ENOMEM; + + pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL); + if (!pci) + return -ENOMEM; + + pci->dev = dev; + pci->ops = &dw_pcie_ops; + pp = &pci->pp; + pp->num_vectors = MAX_MSI_IRQS; + + pcie->pci = pci; + + pcie->cfg = of_device_get_match_data(dev); + if (!pcie->cfg || !pcie->cfg->ops) { + dev_err(dev, "Invalid platform data\n"); + return -EINVAL; + } + + pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH); + if (IS_ERR(pcie->reset)) + return PTR_ERR(pcie->reset); + + pcie->parf = devm_platform_ioremap_resource_byname(pdev, "parf"); + if (IS_ERR(pcie->parf)) + return PTR_ERR(pcie->parf); + + pcie->elbi = devm_platform_ioremap_resource_byname(pdev, "elbi"); + if (IS_ERR(pcie->elbi)) + return PTR_ERR(pcie->elbi); + + pcie->phy = devm_phy_optional_get(dev, "pciephy"); + if (IS_ERR(pcie->phy)) + return PTR_ERR(pcie->phy); + + ret = pcie->cfg->ops->get_resources(pcie); + if (ret) + return ret; + + pm_runtime_enable(dev); + ret = pm_runtime_resume_and_get(dev); + if (ret < 0) + goto err_pm_runtime_disable; + + pp->ops = &qcom_pcie_dw_ops; + + ret = phy_init(pcie->phy); + if (ret) { + goto err_pm_runtime_put; + } + + platform_set_drvdata(pdev, pcie); + + ret = dw_pcie_host_init(pp); + if (ret) { + dev_err(dev, "cannot initialize host\n"); + goto err_pm_runtime_put; + } + + return 0; + +err_pm_runtime_put: + pm_runtime_put(dev); +err_pm_runtime_disable: + pm_runtime_disable(dev); + + return ret; +} + +static const struct of_device_id qcom_pcie_match[] = { + { .compatible = "qcom,pcie-apq8084", .data = &apq8084_cfg }, + { .compatible = "qcom,pcie-ipq8064", .data = &ipq8064_cfg }, + { .compatible = "qcom,pcie-ipq8064-v2", .data = &ipq8064_cfg }, + { .compatible = "qcom,pcie-apq8064", .data = &ipq8064_cfg }, + { .compatible = "qcom,pcie-msm8996", .data = &msm8996_cfg }, + { .compatible = "qcom,pcie-ipq8074", .data = &ipq8074_cfg }, + { .compatible = "qcom,pcie-ipq4019", .data = &ipq4019_cfg }, + { .compatible = "qcom,pcie-qcs404", .data = &ipq4019_cfg }, + { .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg }, + { .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg }, + { .compatible = "qcom,pcie-sc8180x", .data = &sm8250_cfg }, + { .compatible = "qcom,pcie-sm8450-pcie0", .data = &sm8450_pcie0_cfg }, + { .compatible = "qcom,pcie-sm8450-pcie1", .data = &sm8450_pcie1_cfg }, + { .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg }, + { } +}; + +static void qcom_fixup_class(struct pci_dev *dev) +{ + dev->class = PCI_CLASS_BRIDGE_PCI_NORMAL; +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0101, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0104, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0106, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0107, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0302, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1000, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1001, qcom_fixup_class); + +static struct platform_driver qcom_pcie_driver = { + .probe = qcom_pcie_probe, + .driver = { + .name = "qcom-pcie", + .suppress_bind_attrs = true, + .of_match_table = qcom_pcie_match, + }, +}; +builtin_platform_driver(qcom_pcie_driver); diff --git a/rr-cache/6541c1ada5c763f61289c3532803a0074f78d3f5/preimage b/rr-cache/6541c1ada5c763f61289c3532803a0074f78d3f5/preimage new file mode 100644 index 0000000..d37755c --- /dev/null +++ b/rr-cache/6541c1ada5c763f61289c3532803a0074f78d3f5/preimage @@ -0,0 +1,1672 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Qualcomm PCIe root complex driver + * + * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. + * Copyright 2015 Linaro Limited. + * + * Author: Stanimir Varbanov <svarbanov@mm-sol.com> + */ + +#include <linux/clk.h> +#include <linux/crc8.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/interconnect.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/pci.h> +#include <linux/pm_runtime.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> +#include <linux/regulator/consumer.h> +#include <linux/reset.h> +#include <linux/slab.h> +#include <linux/types.h> + +#include "../../pci.h" +#include "pcie-designware.h" + +#define PCIE20_PARF_SYS_CTRL 0x00 +#define MST_WAKEUP_EN BIT(13) +#define SLV_WAKEUP_EN BIT(12) +#define MSTR_ACLK_CGC_DIS BIT(10) +#define SLV_ACLK_CGC_DIS BIT(9) +#define CORE_CLK_CGC_DIS BIT(6) +#define AUX_PWR_DET BIT(4) +#define L23_CLK_RMV_DIS BIT(2) +#define L1_CLK_RMV_DIS BIT(1) + +#define PCIE20_PARF_PHY_CTRL 0x40 +#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK GENMASK(20, 16) +#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) ((x) << 16) + +#define PCIE20_PARF_PHY_REFCLK 0x4C +#define PHY_REFCLK_SSP_EN BIT(16) +#define PHY_REFCLK_USE_PAD BIT(12) + +#define PCIE20_PARF_DBI_BASE_ADDR 0x168 +#define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16C +#define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174 +#define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178 +#define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1A8 +#define PCIE20_PARF_LTSSM 0x1B0 +#define PCIE20_PARF_SID_OFFSET 0x234 +#define PCIE20_PARF_BDF_TRANSLATE_CFG 0x24C +#define PCIE20_PARF_DEVICE_TYPE 0x1000 +#define PCIE20_PARF_BDF_TO_SID_TABLE_N 0x2000 + +#define PCIE20_ELBI_SYS_CTRL 0x04 +#define PCIE20_ELBI_SYS_CTRL_LT_ENABLE BIT(0) + +#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0 0x818 +#define CFG_REMOTE_RD_REQ_BRIDGE_SIZE_2K 0x4 +#define CFG_REMOTE_RD_REQ_BRIDGE_SIZE_4K 0x5 +#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c +#define CFG_BRIDGE_SB_INIT BIT(0) + +#define PCIE_CAP_LINK1_VAL 0x2FD7F + +#define PCIE20_PARF_Q2A_FLUSH 0x1AC + +#define PCIE20_MISC_CONTROL_1_REG 0x8BC +#define DBI_RO_WR_EN 1 + +#define PERST_DELAY_US 1000 +/* PARF registers */ +#define PCIE20_PARF_PCS_DEEMPH 0x34 +#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) ((x) << 16) +#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) ((x) << 8) +#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) ((x) << 0) + +#define PCIE20_PARF_PCS_SWING 0x38 +#define PCS_SWING_TX_SWING_FULL(x) ((x) << 8) +#define PCS_SWING_TX_SWING_LOW(x) ((x) << 0) + +#define PCIE20_PARF_CONFIG_BITS 0x50 +#define PHY_RX0_EQ(x) ((x) << 24) + +#define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358 +#define SLV_ADDR_SPACE_SZ 0x10000000 + +#define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xa0 + +#define DEVICE_TYPE_RC 0x4 + +#define QCOM_PCIE_2_1_0_MAX_SUPPLY 3 +#define QCOM_PCIE_2_1_0_MAX_CLOCKS 5 + +#define QCOM_PCIE_CRC8_POLYNOMIAL (BIT(2) | BIT(1) | BIT(0)) + +struct qcom_pcie_resources_2_1_0 { + struct clk_bulk_data clks[QCOM_PCIE_2_1_0_MAX_CLOCKS]; + struct reset_control *pci_reset; + struct reset_control *axi_reset; + struct reset_control *ahb_reset; + struct reset_control *por_reset; + struct reset_control *phy_reset; + struct reset_control *ext_reset; + struct regulator_bulk_data supplies[QCOM_PCIE_2_1_0_MAX_SUPPLY]; +}; + +struct qcom_pcie_resources_1_0_0 { + struct clk *iface; + struct clk *aux; + struct clk *master_bus; + struct clk *slave_bus; + struct reset_control *core; + struct regulator *vdda; +}; + +#define QCOM_PCIE_2_3_2_MAX_SUPPLY 2 +struct qcom_pcie_resources_2_3_2 { + struct clk *aux_clk; + struct clk *master_clk; + struct clk *slave_clk; + struct clk *cfg_clk; + struct regulator_bulk_data supplies[QCOM_PCIE_2_3_2_MAX_SUPPLY]; +}; + +#define QCOM_PCIE_2_4_0_MAX_CLOCKS 4 +struct qcom_pcie_resources_2_4_0 { + struct clk_bulk_data clks[QCOM_PCIE_2_4_0_MAX_CLOCKS]; + int num_clks; + struct reset_control *axi_m_reset; + struct reset_control *axi_s_reset; + struct reset_control *pipe_reset; + struct reset_control *axi_m_vmid_reset; + struct reset_control *axi_s_xpu_reset; + struct reset_control *parf_reset; + struct reset_control *phy_reset; + struct reset_control *axi_m_sticky_reset; + struct reset_control *pipe_sticky_reset; + struct reset_control *pwr_reset; + struct reset_control *ahb_reset; + struct reset_control *phy_ahb_reset; +}; + +struct qcom_pcie_resources_2_3_3 { + struct clk *iface; + struct clk *axi_m_clk; + struct clk *axi_s_clk; + struct clk *ahb_clk; + struct clk *aux_clk; + struct reset_control *rst[7]; +}; + +/* 6 clocks typically, 7 for sm8250 */ +struct qcom_pcie_resources_2_7_0 { + struct clk_bulk_data clks[9]; + int num_clks; + struct regulator_bulk_data supplies[2]; + struct reset_control *pci_reset; + struct clk *pipe_clk_src; + struct clk *phy_pipe_clk; + struct clk *ref_clk_src; + struct icc_path *path; +}; + +union qcom_pcie_resources { + struct qcom_pcie_resources_1_0_0 v1_0_0; + struct qcom_pcie_resources_2_1_0 v2_1_0; + struct qcom_pcie_resources_2_3_2 v2_3_2; + struct qcom_pcie_resources_2_3_3 v2_3_3; + struct qcom_pcie_resources_2_4_0 v2_4_0; + struct qcom_pcie_resources_2_7_0 v2_7_0; +}; + +struct qcom_pcie; + +struct qcom_pcie_ops { + int (*get_resources)(struct qcom_pcie *pcie); + int (*init)(struct qcom_pcie *pcie); + void (*deinit)(struct qcom_pcie *pcie); + void (*ltssm_enable)(struct qcom_pcie *pcie); + int (*config_sid)(struct qcom_pcie *pcie); +}; + +struct qcom_pcie_cfg { + const struct qcom_pcie_ops *ops; + unsigned int pipe_clk_need_muxing:1; + unsigned int has_tbu_clk:1; + unsigned int has_ddrss_sf_tbu_clk:1; + unsigned int has_aggre0_clk:1; + unsigned int has_aggre1_clk:1; +}; + +struct qcom_pcie { + struct dw_pcie *pci; + void __iomem *parf; /* DT parf */ + void __iomem *elbi; /* DT elbi */ + union qcom_pcie_resources res; + struct phy *phy; + struct gpio_desc *reset; + const struct qcom_pcie_cfg *cfg; +}; + +#define to_qcom_pcie(x) dev_get_drvdata((x)->dev) + +static void qcom_ep_reset_assert(struct qcom_pcie *pcie) +{ + gpiod_set_value_cansleep(pcie->reset, 1); + usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500); +} + +static void qcom_ep_reset_deassert(struct qcom_pcie *pcie) +{ + /* Ensure that PERST has been asserted for at least 100 ms */ + msleep(100); + gpiod_set_value_cansleep(pcie->reset, 0); + usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500); +} + +static int qcom_pcie_start_link(struct dw_pcie *pci) +{ + struct qcom_pcie *pcie = to_qcom_pcie(pci); + + /* Enable Link Training state machine */ + if (pcie->cfg->ops->ltssm_enable) + pcie->cfg->ops->ltssm_enable(pcie); + + return 0; +} + +static void qcom_pcie_2_1_0_ltssm_enable(struct qcom_pcie *pcie) +{ + u32 val; + + /* enable link training */ + val = readl(pcie->elbi + PCIE20_ELBI_SYS_CTRL); + val |= PCIE20_ELBI_SYS_CTRL_LT_ENABLE; + writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL); +} + +static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + int ret; + + res->supplies[0].supply = "vdda"; + res->supplies[1].supply = "vdda_phy"; + res->supplies[2].supply = "vdda_refclk"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(res->supplies), + res->supplies); + if (ret) + return ret; + + res->clks[0].id = "iface"; + res->clks[1].id = "core"; + res->clks[2].id = "phy"; + res->clks[3].id = "aux"; + res->clks[4].id = "ref"; + + /* iface, core, phy are required */ + ret = devm_clk_bulk_get(dev, 3, res->clks); + if (ret < 0) + return ret; + + /* aux, ref are optional */ + ret = devm_clk_bulk_get_optional(dev, 2, res->clks + 3); + if (ret < 0) + return ret; + + res->pci_reset = devm_reset_control_get_exclusive(dev, "pci"); + if (IS_ERR(res->pci_reset)) + return PTR_ERR(res->pci_reset); + + res->axi_reset = devm_reset_control_get_exclusive(dev, "axi"); + if (IS_ERR(res->axi_reset)) + return PTR_ERR(res->axi_reset); + + res->ahb_reset = devm_reset_control_get_exclusive(dev, "ahb"); + if (IS_ERR(res->ahb_reset)) + return PTR_ERR(res->ahb_reset); + + res->por_reset = devm_reset_control_get_exclusive(dev, "por"); + if (IS_ERR(res->por_reset)) + return PTR_ERR(res->por_reset); + + res->ext_reset = devm_reset_control_get_optional_exclusive(dev, "ext"); + if (IS_ERR(res->ext_reset)) + return PTR_ERR(res->ext_reset); + + res->phy_reset = devm_reset_control_get_exclusive(dev, "phy"); + return PTR_ERR_OR_ZERO(res->phy_reset); +} + +static void qcom_pcie_deinit_2_1_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0; + + clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); + reset_control_assert(res->pci_reset); + reset_control_assert(res->axi_reset); + reset_control_assert(res->ahb_reset); + reset_control_assert(res->por_reset); + reset_control_assert(res->ext_reset); + reset_control_assert(res->phy_reset); + + writel(1, pcie->parf + PCIE20_PARF_PHY_CTRL); + + regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); +} + +static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + struct device_node *node = dev->of_node; + u32 val; + int ret; + + /* reset the PCIe interface as uboot can leave it undefined state */ + reset_control_assert(res->pci_reset); + reset_control_assert(res->axi_reset); + reset_control_assert(res->ahb_reset); + reset_control_assert(res->por_reset); + reset_control_assert(res->ext_reset); + reset_control_assert(res->phy_reset); + + writel(1, pcie->parf + PCIE20_PARF_PHY_CTRL); + + ret = regulator_bulk_enable(ARRAY_SIZE(res->supplies), res->supplies); + if (ret < 0) { + dev_err(dev, "cannot enable regulators\n"); + return ret; + } + + ret = reset_control_deassert(res->ahb_reset); + if (ret) { + dev_err(dev, "cannot deassert ahb reset\n"); + goto err_deassert_ahb; + } + + ret = reset_control_deassert(res->ext_reset); + if (ret) { + dev_err(dev, "cannot deassert ext reset\n"); + goto err_deassert_ext; + } + + ret = reset_control_deassert(res->phy_reset); + if (ret) { + dev_err(dev, "cannot deassert phy reset\n"); + goto err_deassert_phy; + } + + ret = reset_control_deassert(res->pci_reset); + if (ret) { + dev_err(dev, "cannot deassert pci reset\n"); + goto err_deassert_pci; + } + + ret = reset_control_deassert(res->por_reset); + if (ret) { + dev_err(dev, "cannot deassert por reset\n"); + goto err_deassert_por; + } + + ret = reset_control_deassert(res->axi_reset); + if (ret) { + dev_err(dev, "cannot deassert axi reset\n"); + goto err_deassert_axi; + } + + ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); + if (ret) + goto err_clks; + + /* enable PCIe clocks and resets */ + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); + val &= ~BIT(0); + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); + + if (of_device_is_compatible(node, "qcom,pcie-ipq8064") || + of_device_is_compatible(node, "qcom,pcie-ipq8064-v2")) { + writel(PCS_DEEMPH_TX_DEEMPH_GEN1(24) | + PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(24) | + PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(34), + pcie->parf + PCIE20_PARF_PCS_DEEMPH); + writel(PCS_SWING_TX_SWING_FULL(120) | + PCS_SWING_TX_SWING_LOW(120), + pcie->parf + PCIE20_PARF_PCS_SWING); + writel(PHY_RX0_EQ(4), pcie->parf + PCIE20_PARF_CONFIG_BITS); + } + + if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) { + /* set TX termination offset */ + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); + val &= ~PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK; + val |= PHY_CTRL_PHY_TX0_TERM_OFFSET(7); + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); + } + + /* enable external reference clock */ + val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK); + /* USE_PAD is required only for ipq806x */ + if (!of_device_is_compatible(node, "qcom,pcie-apq8064")) + val &= ~PHY_REFCLK_USE_PAD; + val |= PHY_REFCLK_SSP_EN; + writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK); + + /* wait for clock acquisition */ + usleep_range(1000, 1500); + + /* Set the Max TLP size to 2K, instead of using default of 4K */ + writel(CFG_REMOTE_RD_REQ_BRIDGE_SIZE_2K, + pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL0); + writel(CFG_BRIDGE_SB_INIT, + pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1); + + return 0; + +err_clks: + reset_control_assert(res->axi_reset); +err_deassert_axi: + reset_control_assert(res->por_reset); +err_deassert_por: + reset_control_assert(res->pci_reset); +err_deassert_pci: + reset_control_assert(res->phy_reset); +err_deassert_phy: + reset_control_assert(res->ext_reset); +err_deassert_ext: + reset_control_assert(res->ahb_reset); +err_deassert_ahb: + regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); + + return ret; +} + +static int qcom_pcie_get_resources_1_0_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_1_0_0 *res = &pcie->res.v1_0_0; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + + res->vdda = devm_regulator_get(dev, "vdda"); + if (IS_ERR(res->vdda)) + return PTR_ERR(res->vdda); + + res->iface = devm_clk_get(dev, "iface"); + if (IS_ERR(res->iface)) + return PTR_ERR(res->iface); + + res->aux = devm_clk_get(dev, "aux"); + if (IS_ERR(res->aux)) + return PTR_ERR(res->aux); + + res->master_bus = devm_clk_get(dev, "master_bus"); + if (IS_ERR(res->master_bus)) + return PTR_ERR(res->master_bus); + + res->slave_bus = devm_clk_get(dev, "slave_bus"); + if (IS_ERR(res->slave_bus)) + return PTR_ERR(res->slave_bus); + + res->core = devm_reset_control_get_exclusive(dev, "core"); + return PTR_ERR_OR_ZERO(res->core); +} + +static void qcom_pcie_deinit_1_0_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_1_0_0 *res = &pcie->res.v1_0_0; + + reset_control_assert(res->core); + clk_disable_unprepare(res->slave_bus); + clk_disable_unprepare(res->master_bus); + clk_disable_unprepare(res->iface); + clk_disable_unprepare(res->aux); + regulator_disable(res->vdda); +} + +static int qcom_pcie_init_1_0_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_1_0_0 *res = &pcie->res.v1_0_0; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + int ret; + + ret = reset_control_deassert(res->core); + if (ret) { + dev_err(dev, "cannot deassert core reset\n"); + return ret; + } + + ret = clk_prepare_enable(res->aux); + if (ret) { + dev_err(dev, "cannot prepare/enable aux clock\n"); + goto err_res; + } + + ret = clk_prepare_enable(res->iface); + if (ret) { + dev_err(dev, "cannot prepare/enable iface clock\n"); + goto err_aux; + } + + ret = clk_prepare_enable(res->master_bus); + if (ret) { + dev_err(dev, "cannot prepare/enable master_bus clock\n"); + goto err_iface; + } + + ret = clk_prepare_enable(res->slave_bus); + if (ret) { + dev_err(dev, "cannot prepare/enable slave_bus clock\n"); + goto err_master; + } + + ret = regulator_enable(res->vdda); + if (ret) { + dev_err(dev, "cannot enable vdda regulator\n"); + goto err_slave; + } + + /* change DBI base address */ + writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR); + + if (IS_ENABLED(CONFIG_PCI_MSI)) { + u32 val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT); + + val |= BIT(31); + writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT); + } + + return 0; +err_slave: + clk_disable_unprepare(res->slave_bus); +err_master: + clk_disable_unprepare(res->master_bus); +err_iface: + clk_disable_unprepare(res->iface); +err_aux: + clk_disable_unprepare(res->aux); +err_res: + reset_control_assert(res->core); + + return ret; +} + +static void qcom_pcie_2_3_2_ltssm_enable(struct qcom_pcie *pcie) +{ + u32 val; + + /* enable link training */ + val = readl(pcie->parf + PCIE20_PARF_LTSSM); + val |= BIT(8); + writel(val, pcie->parf + PCIE20_PARF_LTSSM); +} + +static int qcom_pcie_get_resources_2_3_2(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + int ret; + + res->supplies[0].supply = "vdda"; + res->supplies[1].supply = "vddpe-3v3"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(res->supplies), + res->supplies); + if (ret) + return ret; + + res->aux_clk = devm_clk_get(dev, "aux"); + if (IS_ERR(res->aux_clk)) + return PTR_ERR(res->aux_clk); + + res->cfg_clk = devm_clk_get(dev, "cfg"); + if (IS_ERR(res->cfg_clk)) + return PTR_ERR(res->cfg_clk); + + res->master_clk = devm_clk_get(dev, "bus_master"); + if (IS_ERR(res->master_clk)) + return PTR_ERR(res->master_clk); + + res->slave_clk = devm_clk_get(dev, "bus_slave"); + return PTR_ERR_OR_ZERO(res->slave_clk); +} + +static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2; + + clk_disable_unprepare(res->slave_clk); + clk_disable_unprepare(res->master_clk); + clk_disable_unprepare(res->cfg_clk); + clk_disable_unprepare(res->aux_clk); + + regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); +} + +static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + u32 val; + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(res->supplies), res->supplies); + if (ret < 0) { + dev_err(dev, "cannot enable regulators\n"); + return ret; + } + + ret = clk_prepare_enable(res->aux_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable aux clock\n"); + goto err_aux_clk; + } + + ret = clk_prepare_enable(res->cfg_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable cfg clock\n"); + goto err_cfg_clk; + } + + ret = clk_prepare_enable(res->master_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable master clock\n"); + goto err_master_clk; + } + + ret = clk_prepare_enable(res->slave_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable slave clock\n"); + goto err_slave_clk; + } + + /* enable PCIe clocks and resets */ + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); + val &= ~BIT(0); + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); + + /* change DBI base address */ + writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR); + + /* MAC PHY_POWERDOWN MUX DISABLE */ + val = readl(pcie->parf + PCIE20_PARF_SYS_CTRL); + val &= ~BIT(29); + writel(val, pcie->parf + PCIE20_PARF_SYS_CTRL); + + val = readl(pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL); + val |= BIT(4); + writel(val, pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL); + + val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2); + val |= BIT(31); + writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2); + + return 0; + +err_slave_clk: + clk_disable_unprepare(res->master_clk); +err_master_clk: + clk_disable_unprepare(res->cfg_clk); +err_cfg_clk: + clk_disable_unprepare(res->aux_clk); + +err_aux_clk: + regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); + + return ret; +} + +static int qcom_pcie_get_resources_2_4_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + bool is_ipq = of_device_is_compatible(dev->of_node, "qcom,pcie-ipq4019"); + int ret; + + res->clks[0].id = "aux"; + res->clks[1].id = "master_bus"; + res->clks[2].id = "slave_bus"; + res->clks[3].id = "iface"; + + /* qcom,pcie-ipq4019 is defined without "iface" */ + res->num_clks = is_ipq ? 3 : 4; + + ret = devm_clk_bulk_get(dev, res->num_clks, res->clks); + if (ret < 0) + return ret; + + res->axi_m_reset = devm_reset_control_get_exclusive(dev, "axi_m"); + if (IS_ERR(res->axi_m_reset)) + return PTR_ERR(res->axi_m_reset); + + res->axi_s_reset = devm_reset_control_get_exclusive(dev, "axi_s"); + if (IS_ERR(res->axi_s_reset)) + return PTR_ERR(res->axi_s_reset); + + if (is_ipq) { + /* + * These resources relates to the PHY or are secure clocks, but + * are controlled here for IPQ4019 + */ + res->pipe_reset = devm_reset_control_get_exclusive(dev, "pipe"); + if (IS_ERR(res->pipe_reset)) + return PTR_ERR(res->pipe_reset); + + res->axi_m_vmid_reset = devm_reset_control_get_exclusive(dev, + "axi_m_vmid"); + if (IS_ERR(res->axi_m_vmid_reset)) + return PTR_ERR(res->axi_m_vmid_reset); + + res->axi_s_xpu_reset = devm_reset_control_get_exclusive(dev, + "axi_s_xpu"); + if (IS_ERR(res->axi_s_xpu_reset)) + return PTR_ERR(res->axi_s_xpu_reset); + + res->parf_reset = devm_reset_control_get_exclusive(dev, "parf"); + if (IS_ERR(res->parf_reset)) + return PTR_ERR(res->parf_reset); + + res->phy_reset = devm_reset_control_get_exclusive(dev, "phy"); + if (IS_ERR(res->phy_reset)) + return PTR_ERR(res->phy_reset); + } + + res->axi_m_sticky_reset = devm_reset_control_get_exclusive(dev, + "axi_m_sticky"); + if (IS_ERR(res->axi_m_sticky_reset)) + return PTR_ERR(res->axi_m_sticky_reset); + + res->pipe_sticky_reset = devm_reset_control_get_exclusive(dev, + "pipe_sticky"); + if (IS_ERR(res->pipe_sticky_reset)) + return PTR_ERR(res->pipe_sticky_reset); + + res->pwr_reset = devm_reset_control_get_exclusive(dev, "pwr"); + if (IS_ERR(res->pwr_reset)) + return PTR_ERR(res->pwr_reset); + + res->ahb_reset = devm_reset_control_get_exclusive(dev, "ahb"); + if (IS_ERR(res->ahb_reset)) + return PTR_ERR(res->ahb_reset); + + if (is_ipq) { + res->phy_ahb_reset = devm_reset_control_get_exclusive(dev, "phy_ahb"); + if (IS_ERR(res->phy_ahb_reset)) + return PTR_ERR(res->phy_ahb_reset); + } + + return 0; +} + +static void qcom_pcie_deinit_2_4_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0; + + reset_control_assert(res->axi_m_reset); + reset_control_assert(res->axi_s_reset); + reset_control_assert(res->pipe_reset); + reset_control_assert(res->pipe_sticky_reset); + reset_control_assert(res->phy_reset); + reset_control_assert(res->phy_ahb_reset); + reset_control_assert(res->axi_m_sticky_reset); + reset_control_assert(res->pwr_reset); + reset_control_assert(res->ahb_reset); + clk_bulk_disable_unprepare(res->num_clks, res->clks); +} + +static int qcom_pcie_init_2_4_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + u32 val; + int ret; + + ret = reset_control_assert(res->axi_m_reset); + if (ret) { + dev_err(dev, "cannot assert axi master reset\n"); + return ret; + } + + ret = reset_control_assert(res->axi_s_reset); + if (ret) { + dev_err(dev, "cannot assert axi slave reset\n"); + return ret; + } + + usleep_range(10000, 12000); + + ret = reset_control_assert(res->pipe_reset); + if (ret) { + dev_err(dev, "cannot assert pipe reset\n"); + return ret; + } + + ret = reset_control_assert(res->pipe_sticky_reset); + if (ret) { + dev_err(dev, "cannot assert pipe sticky reset\n"); + return ret; + } + + ret = reset_control_assert(res->phy_reset); + if (ret) { + dev_err(dev, "cannot assert phy reset\n"); + return ret; + } + + ret = reset_control_assert(res->phy_ahb_reset); + if (ret) { + dev_err(dev, "cannot assert phy ahb reset\n"); + return ret; + } + + usleep_range(10000, 12000); + + ret = reset_control_assert(res->axi_m_sticky_reset); + if (ret) { + dev_err(dev, "cannot assert axi master sticky reset\n"); + return ret; + } + + ret = reset_control_assert(res->pwr_reset); + if (ret) { + dev_err(dev, "cannot assert power reset\n"); + return ret; + } + + ret = reset_control_assert(res->ahb_reset); + if (ret) { + dev_err(dev, "cannot assert ahb reset\n"); + return ret; + } + + usleep_range(10000, 12000); + + ret = reset_control_deassert(res->phy_ahb_reset); + if (ret) { + dev_err(dev, "cannot deassert phy ahb reset\n"); + return ret; + } + + ret = reset_control_deassert(res->phy_reset); + if (ret) { + dev_err(dev, "cannot deassert phy reset\n"); + goto err_rst_phy; + } + + ret = reset_control_deassert(res->pipe_reset); + if (ret) { + dev_err(dev, "cannot deassert pipe reset\n"); + goto err_rst_pipe; + } + + ret = reset_control_deassert(res->pipe_sticky_reset); + if (ret) { + dev_err(dev, "cannot deassert pipe sticky reset\n"); + goto err_rst_pipe_sticky; + } + + usleep_range(10000, 12000); + + ret = reset_control_deassert(res->axi_m_reset); + if (ret) { + dev_err(dev, "cannot deassert axi master reset\n"); + goto err_rst_axi_m; + } + + ret = reset_control_deassert(res->axi_m_sticky_reset); + if (ret) { + dev_err(dev, "cannot deassert axi master sticky reset\n"); + goto err_rst_axi_m_sticky; + } + + ret = reset_control_deassert(res->axi_s_reset); + if (ret) { + dev_err(dev, "cannot deassert axi slave reset\n"); + goto err_rst_axi_s; + } + + ret = reset_control_deassert(res->pwr_reset); + if (ret) { + dev_err(dev, "cannot deassert power reset\n"); + goto err_rst_pwr; + } + + ret = reset_control_deassert(res->ahb_reset); + if (ret) { + dev_err(dev, "cannot deassert ahb reset\n"); + goto err_rst_ahb; + } + + usleep_range(10000, 12000); + + ret = clk_bulk_prepare_enable(res->num_clks, res->clks); + if (ret) + goto err_clks; + + /* enable PCIe clocks and resets */ + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); + val &= ~BIT(0); + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); + + /* change DBI base address */ + writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR); + + /* MAC PHY_POWERDOWN MUX DISABLE */ + val = readl(pcie->parf + PCIE20_PARF_SYS_CTRL); + val &= ~BIT(29); + writel(val, pcie->parf + PCIE20_PARF_SYS_CTRL); + + val = readl(pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL); + val |= BIT(4); + writel(val, pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL); + + val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2); + val |= BIT(31); + writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2); + + return 0; + +err_clks: + reset_control_assert(res->ahb_reset); +err_rst_ahb: + reset_control_assert(res->pwr_reset); +err_rst_pwr: + reset_control_assert(res->axi_s_reset); +err_rst_axi_s: + reset_control_assert(res->axi_m_sticky_reset); +err_rst_axi_m_sticky: + reset_control_assert(res->axi_m_reset); +err_rst_axi_m: + reset_control_assert(res->pipe_sticky_reset); +err_rst_pipe_sticky: + reset_control_assert(res->pipe_reset); +err_rst_pipe: + reset_control_assert(res->phy_reset); +err_rst_phy: + reset_control_assert(res->phy_ahb_reset); + return ret; +} + +static int qcom_pcie_get_resources_2_3_3(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + int i; + const char *rst_names[] = { "axi_m", "axi_s", "pipe", + "axi_m_sticky", "sticky", + "ahb", "sleep", }; + + res->iface = devm_clk_get(dev, "iface"); + if (IS_ERR(res->iface)) + return PTR_ERR(res->iface); + + res->axi_m_clk = devm_clk_get(dev, "axi_m"); + if (IS_ERR(res->axi_m_clk)) + return PTR_ERR(res->axi_m_clk); + + res->axi_s_clk = devm_clk_get(dev, "axi_s"); + if (IS_ERR(res->axi_s_clk)) + return PTR_ERR(res->axi_s_clk); + + res->ahb_clk = devm_clk_get(dev, "ahb"); + if (IS_ERR(res->ahb_clk)) + return PTR_ERR(res->ahb_clk); + + res->aux_clk = devm_clk_get(dev, "aux"); + if (IS_ERR(res->aux_clk)) + return PTR_ERR(res->aux_clk); + + for (i = 0; i < ARRAY_SIZE(rst_names); i++) { + res->rst[i] = devm_reset_control_get(dev, rst_names[i]); + if (IS_ERR(res->rst[i])) + return PTR_ERR(res->rst[i]); + } + + return 0; +} + +static void qcom_pcie_deinit_2_3_3(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3; + + clk_disable_unprepare(res->iface); + clk_disable_unprepare(res->axi_m_clk); + clk_disable_unprepare(res->axi_s_clk); + clk_disable_unprepare(res->ahb_clk); + clk_disable_unprepare(res->aux_clk); +} + +static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); + int i, ret; + u32 val; + + for (i = 0; i < ARRAY_SIZE(res->rst); i++) { + ret = reset_control_assert(res->rst[i]); + if (ret) { + dev_err(dev, "reset #%d assert failed (%d)\n", i, ret); + return ret; + } + } + + usleep_range(2000, 2500); + + for (i = 0; i < ARRAY_SIZE(res->rst); i++) { + ret = reset_control_deassert(res->rst[i]); + if (ret) { + dev_err(dev, "reset #%d deassert failed (%d)\n", i, + ret); + return ret; + } + } + + /* + * Don't have a way to see if the reset has completed. + * Wait for some time. + */ + usleep_range(2000, 2500); + + ret = clk_prepare_enable(res->iface); + if (ret) { + dev_err(dev, "cannot prepare/enable core clock\n"); + goto err_clk_iface; + } + + ret = clk_prepare_enable(res->axi_m_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable core clock\n"); + goto err_clk_axi_m; + } + + ret = clk_prepare_enable(res->axi_s_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable axi slave clock\n"); + goto err_clk_axi_s; + } + + ret = clk_prepare_enable(res->ahb_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable ahb clock\n"); + goto err_clk_ahb; + } + + ret = clk_prepare_enable(res->aux_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable aux clock\n"); + goto err_clk_aux; + } + + writel(SLV_ADDR_SPACE_SZ, + pcie->parf + PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE); + + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); + val &= ~BIT(0); + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); + + writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR); + + writel(MST_WAKEUP_EN | SLV_WAKEUP_EN | MSTR_ACLK_CGC_DIS + | SLV_ACLK_CGC_DIS | CORE_CLK_CGC_DIS | + AUX_PWR_DET | L23_CLK_RMV_DIS | L1_CLK_RMV_DIS, + pcie->parf + PCIE20_PARF_SYS_CTRL); + writel(0, pcie->parf + PCIE20_PARF_Q2A_FLUSH); + + writel(PCI_COMMAND_MASTER, pci->dbi_base + PCI_COMMAND); + writel(DBI_RO_WR_EN, pci->dbi_base + PCIE20_MISC_CONTROL_1_REG); + writel(PCIE_CAP_LINK1_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP); + + val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP); + val &= ~PCI_EXP_LNKCAP_ASPMS; + writel(val, pci->dbi_base + offset + PCI_EXP_LNKCAP); + + writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset + + PCI_EXP_DEVCTL2); + + return 0; + +err_clk_aux: + clk_disable_unprepare(res->ahb_clk); +err_clk_ahb: + clk_disable_unprepare(res->axi_s_clk); +err_clk_axi_s: + clk_disable_unprepare(res->axi_m_clk); +err_clk_axi_m: + clk_disable_unprepare(res->iface); +err_clk_iface: + /* + * Not checking for failure, will anyway return + * the original failure in 'ret'. + */ + for (i = 0; i < ARRAY_SIZE(res->rst); i++) + reset_control_assert(res->rst[i]); + + return ret; +} + +static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + unsigned int idx; + int ret; + + res->pci_reset = devm_reset_control_get_exclusive(dev, "pci"); + if (IS_ERR(res->pci_reset)) + return PTR_ERR(res->pci_reset); + + res->path = devm_of_icc_get(dev, "pci"); + if (IS_ERR(res->path)) + return PTR_ERR(res->path); + + res->supplies[0].supply = "vdda"; + res->supplies[1].supply = "vddpe-3v3"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(res->supplies), + res->supplies); + if (ret) + return ret; + + idx = 0; + res->clks[idx++].id = "aux"; + res->clks[idx++].id = "cfg"; + res->clks[idx++].id = "bus_master"; + res->clks[idx++].id = "bus_slave"; + res->clks[idx++].id = "slave_q2a"; + if (pcie->cfg->has_tbu_clk) + res->clks[idx++].id = "tbu"; + if (pcie->cfg->has_ddrss_sf_tbu_clk) + res->clks[idx++].id = "ddrss_sf_tbu"; + if (pcie->cfg->has_aggre0_clk) + res->clks[idx++].id = "aggre0"; + if (pcie->cfg->has_aggre1_clk) + res->clks[idx++].id = "aggre1"; + + res->num_clks = idx; + + ret = devm_clk_bulk_get(dev, res->num_clks, res->clks); + if (ret < 0) + return ret; + + if (pcie->cfg->pipe_clk_need_muxing) { + res->pipe_clk_src = devm_clk_get(dev, "pipe_mux"); + if (IS_ERR(res->pipe_clk_src)) + return PTR_ERR(res->pipe_clk_src); + + res->phy_pipe_clk = devm_clk_get(dev, "phy_pipe"); + if (IS_ERR(res->phy_pipe_clk)) + return PTR_ERR(res->phy_pipe_clk); + + res->ref_clk_src = devm_clk_get(dev, "ref"); + if (IS_ERR(res->ref_clk_src)) + return PTR_ERR(res->ref_clk_src); + + /* Ensure that the TCXO is a clock source for pcie_pipe_clk_src */ + clk_set_parent(res->pipe_clk_src, res->ref_clk_src); + } + + return 0; +} + +static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + u32 val; + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(res->supplies), res->supplies); + if (ret < 0) { + dev_err(dev, "cannot enable regulators\n"); + return ret; + } + +<<<<<<< + /* Set TCXO as clock source for pcie_pipe_clk_src */ + if (pcie->cfg->pipe_clk_need_muxing) + clk_set_parent(res->pipe_clk_src, res->ref_clk_src); +======= + /* Set pipe clock as clock source for pcie_pipe_clk_src */ + if (pcie->cfg->pipe_clk_need_muxing) + clk_set_parent(res->pipe_clk_src, res->phy_pipe_clk); + + if (res->path) + icc_set_bw(res->path, 500, 800); +>>>>>>> + + ret = clk_bulk_prepare_enable(res->num_clks, res->clks); + if (ret < 0) + goto err_disable_regulators; + + ret = reset_control_assert(res->pci_reset); + if (ret < 0) { + dev_err(dev, "cannot deassert pci reset\n"); + goto err_disable_clocks; + } + + usleep_range(1000, 1500); + + ret = reset_control_deassert(res->pci_reset); + if (ret < 0) { + dev_err(dev, "cannot deassert pci reset\n"); + goto err_disable_clocks; + } + + /* Wait for reset to complete, required on SM8450 */ + usleep_range(1000, 1500); + + /* Wait for reset to complete, required on SM8450 */ + usleep_range(1000, 1500); + + /* configure PCIe to RC mode */ + writel(DEVICE_TYPE_RC, pcie->parf + PCIE20_PARF_DEVICE_TYPE); + + /* enable PCIe clocks and resets */ + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); + val &= ~BIT(0); + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); + + /* change DBI base address */ + writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR); + + /* MAC PHY_POWERDOWN MUX DISABLE */ + val = readl(pcie->parf + PCIE20_PARF_SYS_CTRL); + val &= ~BIT(29); + writel(val, pcie->parf + PCIE20_PARF_SYS_CTRL); + + val = readl(pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL); + val |= BIT(4); + writel(val, pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL); + + if (IS_ENABLED(CONFIG_PCI_MSI)) { + val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT); + val |= BIT(31); + writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT); + } + + return 0; +err_disable_clocks: + clk_bulk_disable_unprepare(res->num_clks, res->clks); +err_disable_regulators: + regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); + + return ret; +} + +static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; + + clk_bulk_disable_unprepare(res->num_clks, res->clks); + if (res->path) + icc_set_bw(res->path, 0, 0); + + /* Set TCXO as clock source for pcie_pipe_clk_src */ + if (pcie->cfg->pipe_clk_need_muxing) + clk_set_parent(res->pipe_clk_src, res->ref_clk_src); + + regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); +} + +<<<<<<< +======= +static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; + + /* Set pipe clock as clock source for pcie_pipe_clk_src */ + if (pcie->cfg->pipe_clk_need_muxing) + clk_set_parent(res->pipe_clk_src, res->phy_pipe_clk); + + return clk_prepare_enable(res->pipe_clk); +} + +static void qcom_pcie_post_deinit_2_7_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; + + clk_disable_unprepare(res->pipe_clk); +} + +>>>>>>> +static int qcom_pcie_link_up(struct dw_pcie *pci) +{ + u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); + u16 val = readw(pci->dbi_base + offset + PCI_EXP_LNKSTA); + + return !!(val & PCI_EXP_LNKSTA_DLLLA); +} + +static int qcom_pcie_config_sid_sm8250(struct qcom_pcie *pcie) +{ + /* iommu map structure */ + struct { + u32 bdf; + u32 phandle; + u32 smmu_sid; + u32 smmu_sid_len; + } *map; + void __iomem *bdf_to_sid_base = pcie->parf + PCIE20_PARF_BDF_TO_SID_TABLE_N; + struct device *dev = pcie->pci->dev; + u8 qcom_pcie_crc8_table[CRC8_TABLE_SIZE]; + int i, nr_map, size = 0; + u32 smmu_sid_base; + + of_get_property(dev->of_node, "iommu-map", &size); + if (!size) + return 0; + + map = kzalloc(size, GFP_KERNEL); + if (!map) + return -ENOMEM; + + of_property_read_u32_array(dev->of_node, + "iommu-map", (u32 *)map, size / sizeof(u32)); + + nr_map = size / (sizeof(*map)); + + crc8_populate_msb(qcom_pcie_crc8_table, QCOM_PCIE_CRC8_POLYNOMIAL); + + /* Registers need to be zero out first */ + memset_io(bdf_to_sid_base, 0, CRC8_TABLE_SIZE * sizeof(u32)); + + /* Extract the SMMU SID base from the first entry of iommu-map */ + smmu_sid_base = map[0].smmu_sid; + + /* Look for an available entry to hold the mapping */ + for (i = 0; i < nr_map; i++) { + __be16 bdf_be = cpu_to_be16(map[i].bdf); + u32 val; + u8 hash; + + hash = crc8(qcom_pcie_crc8_table, (u8 *)&bdf_be, sizeof(bdf_be), + 0); + + val = readl(bdf_to_sid_base + hash * sizeof(u32)); + + /* If the register is already populated, look for next available entry */ + while (val) { + u8 current_hash = hash++; + u8 next_mask = 0xff; + + /* If NEXT field is NULL then update it with next hash */ + if (!(val & next_mask)) { + val |= (u32)hash; + writel(val, bdf_to_sid_base + current_hash * sizeof(u32)); + } + + val = readl(bdf_to_sid_base + hash * sizeof(u32)); + } + + /* BDF [31:16] | SID [15:8] | NEXT [7:0] */ + val = map[i].bdf << 16 | (map[i].smmu_sid - smmu_sid_base) << 8 | 0; + writel(val, bdf_to_sid_base + hash * sizeof(u32)); + } + + kfree(map); + + return 0; +} + +static int qcom_pcie_host_init(struct pcie_port *pp) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct qcom_pcie *pcie = to_qcom_pcie(pci); + int ret; + + qcom_ep_reset_assert(pcie); + + ret = pcie->cfg->ops->init(pcie); + if (ret) + return ret; + + ret = phy_power_on(pcie->phy); + if (ret) + goto err_deinit; + +<<<<<<< +======= + if (pcie->cfg->ops->post_init) { + ret = pcie->cfg->ops->post_init(pcie); + if (ret) + goto err_disable_phy; + } + +>>>>>>> + qcom_ep_reset_deassert(pcie); + + if (pcie->cfg->ops->config_sid) { + ret = pcie->cfg->ops->config_sid(pcie); + if (ret) + goto err; + } + + return 0; + +err: + qcom_ep_reset_assert(pcie); +<<<<<<< +======= + if (pcie->cfg->ops->post_deinit) + pcie->cfg->ops->post_deinit(pcie); +err_disable_phy: +>>>>>>> + phy_power_off(pcie->phy); +err_deinit: + pcie->cfg->ops->deinit(pcie); + + return ret; +} + +static const struct dw_pcie_host_ops qcom_pcie_dw_ops = { + .host_init = qcom_pcie_host_init, +}; + +/* Qcom IP rev.: 2.1.0 Synopsys IP rev.: 4.01a */ +static const struct qcom_pcie_ops ops_2_1_0 = { + .get_resources = qcom_pcie_get_resources_2_1_0, + .init = qcom_pcie_init_2_1_0, + .deinit = qcom_pcie_deinit_2_1_0, + .ltssm_enable = qcom_pcie_2_1_0_ltssm_enable, +}; + +/* Qcom IP rev.: 1.0.0 Synopsys IP rev.: 4.11a */ +static const struct qcom_pcie_ops ops_1_0_0 = { + .get_resources = qcom_pcie_get_resources_1_0_0, + .init = qcom_pcie_init_1_0_0, + .deinit = qcom_pcie_deinit_1_0_0, + .ltssm_enable = qcom_pcie_2_1_0_ltssm_enable, +}; + +/* Qcom IP rev.: 2.3.2 Synopsys IP rev.: 4.21a */ +static const struct qcom_pcie_ops ops_2_3_2 = { + .get_resources = qcom_pcie_get_resources_2_3_2, + .init = qcom_pcie_init_2_3_2, + .deinit = qcom_pcie_deinit_2_3_2, + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, +}; + +/* Qcom IP rev.: 2.4.0 Synopsys IP rev.: 4.20a */ +static const struct qcom_pcie_ops ops_2_4_0 = { + .get_resources = qcom_pcie_get_resources_2_4_0, + .init = qcom_pcie_init_2_4_0, + .deinit = qcom_pcie_deinit_2_4_0, + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, +}; + +/* Qcom IP rev.: 2.3.3 Synopsys IP rev.: 4.30a */ +static const struct qcom_pcie_ops ops_2_3_3 = { + .get_resources = qcom_pcie_get_resources_2_3_3, + .init = qcom_pcie_init_2_3_3, + .deinit = qcom_pcie_deinit_2_3_3, + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, +}; + +/* Qcom IP rev.: 2.7.0 Synopsys IP rev.: 4.30a */ +static const struct qcom_pcie_ops ops_2_7_0 = { + .get_resources = qcom_pcie_get_resources_2_7_0, + .init = qcom_pcie_init_2_7_0, + .deinit = qcom_pcie_deinit_2_7_0, + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, +}; + +/* Qcom IP rev.: 1.9.0 */ +static const struct qcom_pcie_ops ops_1_9_0 = { + .get_resources = qcom_pcie_get_resources_2_7_0, + .init = qcom_pcie_init_2_7_0, + .deinit = qcom_pcie_deinit_2_7_0, + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, + .config_sid = qcom_pcie_config_sid_sm8250, +}; + +static const struct qcom_pcie_cfg apq8084_cfg = { + .ops = &ops_1_0_0, +}; + +static const struct qcom_pcie_cfg ipq8064_cfg = { + .ops = &ops_2_1_0, +}; + +static const struct qcom_pcie_cfg msm8996_cfg = { + .ops = &ops_2_3_2, +}; + +static const struct qcom_pcie_cfg ipq8074_cfg = { + .ops = &ops_2_3_3, +}; + +static const struct qcom_pcie_cfg ipq4019_cfg = { + .ops = &ops_2_4_0, +}; + +static const struct qcom_pcie_cfg sdm845_cfg = { + .ops = &ops_2_7_0, + .has_tbu_clk = true, +}; + +static const struct qcom_pcie_cfg sm8250_cfg = { + .ops = &ops_1_9_0, + .has_tbu_clk = true, + .has_ddrss_sf_tbu_clk = true, +}; + +static const struct qcom_pcie_cfg sm8450_pcie0_cfg = { + .ops = &ops_1_9_0, + .has_ddrss_sf_tbu_clk = true, + .pipe_clk_need_muxing = true, + .has_aggre0_clk = true, + .has_aggre1_clk = true, +}; + +static const struct qcom_pcie_cfg sm8450_pcie1_cfg = { + .ops = &ops_1_9_0, + .has_ddrss_sf_tbu_clk = true, + .pipe_clk_need_muxing = true, + .has_aggre1_clk = true, +}; + +static const struct qcom_pcie_cfg sc7280_cfg = { + .ops = &ops_1_9_0, + .has_tbu_clk = true, + .pipe_clk_need_muxing = true, +}; + +static const struct dw_pcie_ops dw_pcie_ops = { + .link_up = qcom_pcie_link_up, + .start_link = qcom_pcie_start_link, +}; + +static int qcom_pcie_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct pcie_port *pp; + struct dw_pcie *pci; + struct qcom_pcie *pcie; + int ret; + + pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); + if (!pcie) + return -ENOMEM; + + pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL); + if (!pci) + return -ENOMEM; + + pci->dev = dev; + pci->ops = &dw_pcie_ops; + pp = &pci->pp; + pp->num_vectors = MAX_MSI_IRQS; + + pcie->pci = pci; + +<<<<<<< + pcie->cfg = of_device_get_match_data(dev); + if (!pcie->cfg || !pcie->cfg->ops) { + dev_err(dev, "Invalid platform data\n"); + return -EINVAL; + } +======= + pcie->cfg = pcie_cfg; +>>>>>>> + + pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH); + if (IS_ERR(pcie->reset)) + return PTR_ERR(pcie->reset); + + pcie->parf = devm_platform_ioremap_resource_byname(pdev, "parf"); + if (IS_ERR(pcie->parf)) + return PTR_ERR(pcie->parf); + + pcie->elbi = devm_platform_ioremap_resource_byname(pdev, "elbi"); + if (IS_ERR(pcie->elbi)) + return PTR_ERR(pcie->elbi); + + pcie->phy = devm_phy_optional_get(dev, "pciephy"); + if (IS_ERR(pcie->phy)) + return PTR_ERR(pcie->phy); + + ret = pcie->cfg->ops->get_resources(pcie); + if (ret) + return ret; + + pm_runtime_enable(dev); + ret = pm_runtime_resume_and_get(dev); + if (ret < 0) + goto err_pm_runtime_disable; + + pp->ops = &qcom_pcie_dw_ops; + + ret = phy_init(pcie->phy); + if (ret) { + goto err_pm_runtime_put; + } + + platform_set_drvdata(pdev, pcie); + + ret = dw_pcie_host_init(pp); + if (ret) { + dev_err(dev, "cannot initialize host\n"); + goto err_pm_runtime_put; + } + + return 0; + +err_pm_runtime_put: + pm_runtime_put(dev); +err_pm_runtime_disable: + pm_runtime_disable(dev); + + return ret; +} + +static const struct of_device_id qcom_pcie_match[] = { + { .compatible = "qcom,pcie-apq8084", .data = &apq8084_cfg }, + { .compatible = "qcom,pcie-ipq8064", .data = &ipq8064_cfg }, + { .compatible = "qcom,pcie-ipq8064-v2", .data = &ipq8064_cfg }, + { .compatible = "qcom,pcie-apq8064", .data = &ipq8064_cfg }, + { .compatible = "qcom,pcie-msm8996", .data = &msm8996_cfg }, + { .compatible = "qcom,pcie-ipq8074", .data = &ipq8074_cfg }, + { .compatible = "qcom,pcie-ipq4019", .data = &ipq4019_cfg }, + { .compatible = "qcom,pcie-qcs404", .data = &ipq4019_cfg }, + { .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg }, + { .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg }, + { .compatible = "qcom,pcie-sc8180x", .data = &sm8250_cfg }, + { .compatible = "qcom,pcie-sm8450-pcie0", .data = &sm8450_pcie0_cfg }, + { .compatible = "qcom,pcie-sm8450-pcie1", .data = &sm8450_pcie1_cfg }, + { .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg }, + { } +}; + +static void qcom_fixup_class(struct pci_dev *dev) +{ + dev->class = PCI_CLASS_BRIDGE_PCI_NORMAL; +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0101, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0104, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0106, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0107, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0302, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1000, qcom_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1001, qcom_fixup_class); + +static struct platform_driver qcom_pcie_driver = { + .probe = qcom_pcie_probe, + .driver = { + .name = "qcom-pcie", + .suppress_bind_attrs = true, + .of_match_table = qcom_pcie_match, + }, +}; +builtin_platform_driver(qcom_pcie_driver); diff --git a/rr-cache/7121a4cc53afdc4d2cd9103ae9a02e8b2fa18126/postimage b/rr-cache/7121a4cc53afdc4d2cd9103ae9a02e8b2fa18126/postimage new file mode 100644 index 0000000..09cf827 --- /dev/null +++ b/rr-cache/7121a4cc53afdc4d2cd9103ae9a02e8b2fa18126/postimage @@ -0,0 +1,3831 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + +#include <linux/kernel.h> +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/clk-provider.h> +#include <linux/regmap.h> +#include <linux/reset-controller.h> + +#include <dt-bindings/clock/qcom,gcc-sm8150.h> + +#include "common.h" +#include "clk-alpha-pll.h" +#include "clk-branch.h" +#include "clk-pll.h" +#include "clk-rcg.h" +#include "clk-regmap.h" +#include "reset.h" +#include "gdsc.h" + +enum { + P_BI_TCXO, + P_AUD_REF_CLK, + P_CORE_BI_PLL_TEST_SE, + P_GPLL0_OUT_EVEN, + P_GPLL0_OUT_MAIN, + P_GPLL7_OUT_MAIN, + P_GPLL9_OUT_MAIN, + P_SLEEP_CLK, +}; + +static struct clk_alpha_pll gpll0 = { + .offset = 0x0, + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION], + .clkr = { + .enable_reg = 0x52000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gpll0", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "bi_tcxo", + .name = "bi_tcxo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_fixed_trion_ops, + }, + }, +}; + +static const struct clk_div_table post_div_table_trion_even[] = { + { 0x0, 1 }, + { 0x1, 2 }, + { 0x3, 4 }, + { 0x7, 8 }, + { } +}; + +static struct clk_alpha_pll_postdiv gpll0_out_even = { + .offset = 0x0, + .post_div_shift = 8, + .post_div_table = post_div_table_trion_even, + .num_post_div = ARRAY_SIZE(post_div_table_trion_even), + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION], + .width = 4, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gpll0_out_even", + .parent_hws = (const struct clk_hw*[]){ + &gpll0.clkr.hw, + }, + .num_parents = 1, + .ops = &clk_alpha_pll_postdiv_trion_ops, + }, +}; + +static struct clk_alpha_pll gpll7 = { + .offset = 0x1a000, + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION], + .clkr = { + .enable_reg = 0x52000, + .enable_mask = BIT(7), + .hw.init = &(struct clk_init_data){ + .name = "gpll7", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "bi_tcxo", + .name = "bi_tcxo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_fixed_trion_ops, + }, + }, +}; + +static struct clk_alpha_pll gpll9 = { + .offset = 0x1c000, + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION], + .clkr = { + .enable_reg = 0x52000, + .enable_mask = BIT(9), + .hw.init = &(struct clk_init_data){ + .name = "gpll9", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "bi_tcxo", + .name = "bi_tcxo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_fixed_trion_ops, + }, + }, +}; + +static const struct parent_map gcc_parent_map_0[] = { + { P_BI_TCXO, 0 }, + { P_GPLL0_OUT_MAIN, 1 }, + { P_GPLL0_OUT_EVEN, 6 }, + { P_CORE_BI_PLL_TEST_SE, 7 }, +}; + +static const struct clk_parent_data gcc_parents_0[] = { + { .fw_name = "bi_tcxo", .name = "bi_tcxo" }, + { .hw = &gpll0.clkr.hw }, + { .hw = &gpll0_out_even.clkr.hw }, + { .fw_name = "core_bi_pll_test_se" }, +}; + +static const struct parent_map gcc_parent_map_1[] = { + { P_BI_TCXO, 0 }, + { P_GPLL0_OUT_MAIN, 1 }, + { P_SLEEP_CLK, 5 }, + { P_GPLL0_OUT_EVEN, 6 }, + { P_CORE_BI_PLL_TEST_SE, 7 }, +}; + +static const struct clk_parent_data gcc_parents_1[] = { + { .fw_name = "bi_tcxo", .name = "bi_tcxo" }, + { .hw = &gpll0.clkr.hw }, + { .fw_name = "sleep_clk", .name = "sleep_clk" }, + { .hw = &gpll0_out_even.clkr.hw }, + { .fw_name = "core_bi_pll_test_se" }, +}; + +static const struct parent_map gcc_parent_map_2[] = { + { P_BI_TCXO, 0 }, + { P_SLEEP_CLK, 5 }, + { P_CORE_BI_PLL_TEST_SE, 7 }, +}; + +static const struct clk_parent_data gcc_parents_2[] = { + { .fw_name = "bi_tcxo", .name = "bi_tcxo" }, + { .fw_name = "sleep_clk", .name = "sleep_clk" }, + { .fw_name = "core_bi_pll_test_se" }, +}; + +static const struct parent_map gcc_parent_map_3[] = { + { P_BI_TCXO, 0 }, + { P_GPLL0_OUT_MAIN, 1 }, + { P_CORE_BI_PLL_TEST_SE, 7 }, +}; + +static const struct clk_parent_data gcc_parents_3[] = { + { .fw_name = "bi_tcxo", .name = "bi_tcxo" }, + { .hw = &gpll0.clkr.hw }, + { .fw_name = "core_bi_pll_test_se"}, +}; + +static const struct parent_map gcc_parent_map_4[] = { + { P_BI_TCXO, 0 }, + { P_CORE_BI_PLL_TEST_SE, 7 }, +}; + +static const struct clk_parent_data gcc_parents_4[] = { + { .fw_name = "bi_tcxo", .name = "bi_tcxo" }, + { .fw_name = "core_bi_pll_test_se" }, +}; + +static const struct parent_map gcc_parent_map_5[] = { + { P_BI_TCXO, 0 }, + { P_GPLL0_OUT_MAIN, 1 }, + { P_GPLL7_OUT_MAIN, 3 }, + { P_GPLL0_OUT_EVEN, 6 }, + { P_CORE_BI_PLL_TEST_SE, 7 }, +}; + +static const struct clk_parent_data gcc_parents_5[] = { + { .fw_name = "bi_tcxo", .name = "bi_tcxo" }, + { .hw = &gpll0.clkr.hw }, + { .hw = &gpll7.clkr.hw }, + { .hw = &gpll0_out_even.clkr.hw }, + { .fw_name = "core_bi_pll_test_se" }, +}; + +static const struct parent_map gcc_parent_map_6[] = { + { P_BI_TCXO, 0 }, + { P_GPLL0_OUT_MAIN, 1 }, + { P_GPLL9_OUT_MAIN, 2 }, + { P_GPLL0_OUT_EVEN, 6 }, + { P_CORE_BI_PLL_TEST_SE, 7 }, +}; + +static const struct clk_parent_data gcc_parents_6[] = { + { .fw_name = "bi_tcxo", .name = "bi_tcxo" }, + { .hw = &gpll0.clkr.hw }, + { .hw = &gpll9.clkr.hw }, + { .hw = &gpll0_out_even.clkr.hw }, + { .fw_name = "core_bi_pll_test_se" }, +}; + +static const struct parent_map gcc_parent_map_7[] = { + { P_BI_TCXO, 0 }, + { P_GPLL0_OUT_MAIN, 1 }, + { P_AUD_REF_CLK, 2 }, + { P_GPLL0_OUT_EVEN, 6 }, + { P_CORE_BI_PLL_TEST_SE, 7 }, +}; + +static const struct clk_parent_data gcc_parents_7[] = { + { .fw_name = "bi_tcxo", .name = "bi_tcxo" }, + { .hw = &gpll0.clkr.hw }, + { .fw_name = "aud_ref_clk", .name = "aud_ref_clk" }, + { .hw = &gpll0_out_even.clkr.hw }, + { .fw_name = "core_bi_pll_test_se" }, +}; + +static const struct freq_tbl ftbl_gcc_cpuss_ahb_clk_src[] = { + F(19200000, P_BI_TCXO, 1, 0, 0), + F(50000000, P_GPLL0_OUT_MAIN, 12, 0, 0), + F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_cpuss_ahb_clk_src = { + .cmd_rcgr = 0x48014, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_cpuss_ahb_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_cpuss_ahb_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_emac_ptp_clk_src[] = { + F(19200000, P_BI_TCXO, 1, 0, 0), + F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0), + F(125000000, P_GPLL7_OUT_MAIN, 4, 0, 0), + F(250000000, P_GPLL7_OUT_MAIN, 2, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_emac_ptp_clk_src = { + .cmd_rcgr = 0x6038, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_5, + .freq_tbl = ftbl_gcc_emac_ptp_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_emac_ptp_clk_src", + .parent_data = gcc_parents_5, + .num_parents = ARRAY_SIZE(gcc_parents_5), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_emac_rgmii_clk_src[] = { + F(2500000, P_BI_TCXO, 1, 25, 192), + F(5000000, P_BI_TCXO, 1, 25, 96), + F(19200000, P_BI_TCXO, 1, 0, 0), + F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0), + F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0), + F(125000000, P_GPLL7_OUT_MAIN, 4, 0, 0), + F(250000000, P_GPLL7_OUT_MAIN, 2, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_emac_rgmii_clk_src = { + .cmd_rcgr = 0x601c, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_parent_map_5, + .freq_tbl = ftbl_gcc_emac_rgmii_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_emac_rgmii_clk_src", + .parent_data = gcc_parents_5, + .num_parents = ARRAY_SIZE(gcc_parents_5), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_gp1_clk_src[] = { + F(19200000, P_BI_TCXO, 1, 0, 0), + F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0), + F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0), + F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0), + F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_gp1_clk_src = { + .cmd_rcgr = 0x64004, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_parent_map_1, + .freq_tbl = ftbl_gcc_gp1_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_gp1_clk_src", + .parent_data = gcc_parents_1, + .num_parents = ARRAY_SIZE(gcc_parents_1), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_gp2_clk_src = { + .cmd_rcgr = 0x65004, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_parent_map_1, + .freq_tbl = ftbl_gcc_gp1_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_gp2_clk_src", + .parent_data = gcc_parents_1, + .num_parents = ARRAY_SIZE(gcc_parents_1), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_gp3_clk_src = { + .cmd_rcgr = 0x66004, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_parent_map_1, + .freq_tbl = ftbl_gcc_gp1_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_gp3_clk_src", + .parent_data = gcc_parents_1, + .num_parents = ARRAY_SIZE(gcc_parents_1), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_pcie_0_aux_clk_src[] = { + F(9600000, P_BI_TCXO, 2, 0, 0), + F(19200000, P_BI_TCXO, 1, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_pcie_0_aux_clk_src = { + .cmd_rcgr = 0x6b02c, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_2, + .freq_tbl = ftbl_gcc_pcie_0_aux_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_0_aux_clk_src", + .parent_data = gcc_parents_2, + .num_parents = ARRAY_SIZE(gcc_parents_2), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_pcie_1_aux_clk_src = { + .cmd_rcgr = 0x8d02c, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_2, + .freq_tbl = ftbl_gcc_pcie_0_aux_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_1_aux_clk_src", + .parent_data = gcc_parents_2, + .num_parents = ARRAY_SIZE(gcc_parents_2), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_pcie_phy_refgen_clk_src[] = { + F(19200000, P_BI_TCXO, 1, 0, 0), + F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_pcie_phy_refgen_clk_src = { + .cmd_rcgr = 0x6f014, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_pcie_phy_refgen_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_phy_refgen_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_pdm2_clk_src[] = { + F(9600000, P_BI_TCXO, 2, 0, 0), + F(19200000, P_BI_TCXO, 1, 0, 0), + F(60000000, P_GPLL0_OUT_MAIN, 10, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_pdm2_clk_src = { + .cmd_rcgr = 0x33010, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_pdm2_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_pdm2_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_qspi_core_clk_src[] = { + F(19200000, P_BI_TCXO, 1, 0, 0), + F(75000000, P_GPLL0_OUT_EVEN, 4, 0, 0), + F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0), + F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_qspi_core_clk_src = { + .cmd_rcgr = 0x4b008, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qspi_core_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qspi_core_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s0_clk_src[] = { + F(7372800, P_GPLL0_OUT_EVEN, 1, 384, 15625), + F(14745600, P_GPLL0_OUT_EVEN, 1, 768, 15625), + F(19200000, P_BI_TCXO, 1, 0, 0), + F(29491200, P_GPLL0_OUT_EVEN, 1, 1536, 15625), + F(32000000, P_GPLL0_OUT_EVEN, 1, 8, 75), + F(48000000, P_GPLL0_OUT_EVEN, 1, 4, 25), + F(64000000, P_GPLL0_OUT_EVEN, 1, 16, 75), + F(80000000, P_GPLL0_OUT_EVEN, 1, 4, 15), + F(96000000, P_GPLL0_OUT_EVEN, 1, 8, 25), + F(100000000, P_GPLL0_OUT_EVEN, 3, 0, 0), + F(102400000, P_GPLL0_OUT_EVEN, 1, 128, 375), + F(112000000, P_GPLL0_OUT_EVEN, 1, 28, 75), + F(117964800, P_GPLL0_OUT_EVEN, 1, 6144, 15625), + F(120000000, P_GPLL0_OUT_EVEN, 2.5, 0, 0), + F(128000000, P_GPLL0_OUT_MAIN, 1, 16, 75), + { } +}; + +static struct clk_rcg2 gcc_qupv3_wrap0_s0_clk_src = { + .cmd_rcgr = 0x17148, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s0_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap0_s1_clk_src = { + .cmd_rcgr = 0x17278, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s1_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap0_s2_clk_src = { + .cmd_rcgr = 0x173a8, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s2_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap0_s3_clk_src = { + .cmd_rcgr = 0x174d8, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s3_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap0_s4_clk_src = { + .cmd_rcgr = 0x17608, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s4_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap0_s5_clk_src = { + .cmd_rcgr = 0x17738, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s5_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap0_s6_clk_src = { + .cmd_rcgr = 0x17868, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s6_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap0_s7_clk_src = { + .cmd_rcgr = 0x17998, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s7_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap1_s0_clk_src = { + .cmd_rcgr = 0x18148, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s0_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap1_s1_clk_src = { + .cmd_rcgr = 0x18278, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s1_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap1_s2_clk_src = { + .cmd_rcgr = 0x183a8, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s2_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap1_s3_clk_src = { + .cmd_rcgr = 0x184d8, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s3_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap1_s4_clk_src = { + .cmd_rcgr = 0x18608, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s4_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap1_s5_clk_src = { + .cmd_rcgr = 0x18738, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s5_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap2_s0_clk_src = { + .cmd_rcgr = 0x1e148, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s0_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap2_s1_clk_src = { + .cmd_rcgr = 0x1e278, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s1_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap2_s2_clk_src = { + .cmd_rcgr = 0x1e3a8, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s2_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap2_s3_clk_src = { + .cmd_rcgr = 0x1e4d8, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s3_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap2_s4_clk_src = { + .cmd_rcgr = 0x1e608, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s4_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap2_s5_clk_src = { + .cmd_rcgr = 0x1e738, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s5_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_sdcc2_apps_clk_src[] = { + F(400000, P_BI_TCXO, 12, 1, 4), + F(9600000, P_BI_TCXO, 2, 0, 0), + F(19200000, P_BI_TCXO, 1, 0, 0), + F(25000000, P_GPLL0_OUT_MAIN, 12, 1, 2), + F(50000000, P_GPLL0_OUT_MAIN, 12, 0, 0), + F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0), + F(202000000, P_GPLL9_OUT_MAIN, 4, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_sdcc2_apps_clk_src = { + .cmd_rcgr = 0x1400c, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_parent_map_6, + .freq_tbl = ftbl_gcc_sdcc2_apps_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc2_apps_clk_src", + .parent_data = gcc_parents_6, + .num_parents = ARRAY_SIZE(gcc_parents_6), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_floor_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_sdcc4_apps_clk_src[] = { + F(400000, P_BI_TCXO, 12, 1, 4), + F(9600000, P_BI_TCXO, 2, 0, 0), + F(19200000, P_BI_TCXO, 1, 0, 0), + F(25000000, P_GPLL0_OUT_MAIN, 12, 1, 2), + F(50000000, P_GPLL0_OUT_MAIN, 12, 0, 0), + F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_sdcc4_apps_clk_src = { + .cmd_rcgr = 0x1600c, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_parent_map_3, + .freq_tbl = ftbl_gcc_sdcc4_apps_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc4_apps_clk_src", + .parent_data = gcc_parents_3, + .num_parents = ARRAY_SIZE(gcc_parents_3), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_floor_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_tsif_ref_clk_src[] = { + F(105495, P_BI_TCXO, 2, 1, 91), + { } +}; + +static struct clk_rcg2 gcc_tsif_ref_clk_src = { + .cmd_rcgr = 0x36010, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_parent_map_7, + .freq_tbl = ftbl_gcc_tsif_ref_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_tsif_ref_clk_src", + .parent_data = gcc_parents_7, + .num_parents = ARRAY_SIZE(gcc_parents_7), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_ufs_card_axi_clk_src[] = { + F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0), + F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0), + F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0), + F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0), + F(240000000, P_GPLL0_OUT_MAIN, 2.5, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_ufs_card_axi_clk_src = { + .cmd_rcgr = 0x75020, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_ufs_card_axi_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_axi_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_ufs_card_ice_core_clk_src[] = { + F(37500000, P_GPLL0_OUT_EVEN, 8, 0, 0), + F(75000000, P_GPLL0_OUT_EVEN, 4, 0, 0), + F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0), + F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_ufs_card_ice_core_clk_src = { + .cmd_rcgr = 0x75060, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_ufs_card_ice_core_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_ice_core_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_ufs_card_phy_aux_clk_src[] = { + F(19200000, P_BI_TCXO, 1, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_ufs_card_phy_aux_clk_src = { + .cmd_rcgr = 0x75094, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_4, + .freq_tbl = ftbl_gcc_ufs_card_phy_aux_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_phy_aux_clk_src", + .parent_data = gcc_parents_4, + .num_parents = ARRAY_SIZE(gcc_parents_4), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_ufs_card_unipro_core_clk_src[] = { + F(37500000, P_GPLL0_OUT_EVEN, 8, 0, 0), + F(75000000, P_GPLL0_OUT_MAIN, 8, 0, 0), + F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_ufs_card_unipro_core_clk_src = { + .cmd_rcgr = 0x75078, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_ufs_card_unipro_core_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_unipro_core_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_ufs_phy_axi_clk_src[] = { + F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0), + F(37500000, P_GPLL0_OUT_EVEN, 8, 0, 0), + F(75000000, P_GPLL0_OUT_EVEN, 4, 0, 0), + F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0), + F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_ufs_phy_axi_clk_src = { + .cmd_rcgr = 0x77020, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_ufs_phy_axi_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_axi_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_ufs_phy_ice_core_clk_src = { + .cmd_rcgr = 0x77060, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_ufs_card_ice_core_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_ice_core_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_ufs_phy_phy_aux_clk_src = { + .cmd_rcgr = 0x77094, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_4, + .freq_tbl = ftbl_gcc_pcie_0_aux_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_phy_aux_clk_src", + .parent_data = gcc_parents_4, + .num_parents = ARRAY_SIZE(gcc_parents_4), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_ufs_phy_unipro_core_clk_src = { + .cmd_rcgr = 0x77078, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_ufs_card_ice_core_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_unipro_core_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_usb30_prim_master_clk_src[] = { + F(33333333, P_GPLL0_OUT_EVEN, 9, 0, 0), + F(66666667, P_GPLL0_OUT_EVEN, 4.5, 0, 0), + F(133333333, P_GPLL0_OUT_MAIN, 4.5, 0, 0), + F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0), + F(240000000, P_GPLL0_OUT_MAIN, 2.5, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_usb30_prim_master_clk_src = { + .cmd_rcgr = 0xf01c, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_usb30_prim_master_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_usb30_prim_master_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_usb30_prim_mock_utmi_clk_src[] = { + F(19200000, P_BI_TCXO, 1, 0, 0), + F(20000000, P_GPLL0_OUT_EVEN, 15, 0, 0), + F(60000000, P_GPLL0_OUT_EVEN, 5, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_usb30_prim_mock_utmi_clk_src = { + .cmd_rcgr = 0xf034, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_usb30_prim_mock_utmi_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_usb30_prim_mock_utmi_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_usb30_sec_master_clk_src = { + .cmd_rcgr = 0x1001c, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_usb30_prim_master_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_usb30_sec_master_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_usb30_sec_mock_utmi_clk_src = { + .cmd_rcgr = 0x10034, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_usb30_prim_mock_utmi_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_usb30_sec_mock_utmi_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_usb3_prim_phy_aux_clk_src = { + .cmd_rcgr = 0xf060, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_2, + .freq_tbl = ftbl_gcc_ufs_card_phy_aux_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_prim_phy_aux_clk_src", + .parent_data = gcc_parents_2, + .num_parents = ARRAY_SIZE(gcc_parents_2), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_usb3_sec_phy_aux_clk_src = { + .cmd_rcgr = 0x10060, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_2, + .freq_tbl = ftbl_gcc_ufs_card_phy_aux_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_sec_phy_aux_clk_src", + .parent_data = gcc_parents_2, + .num_parents = ARRAY_SIZE(gcc_parents_2), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_aggre_noc_pcie_tbu_clk = { + .halt_reg = 0x90018, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x90018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_aggre_noc_pcie_tbu_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_aggre_ufs_card_axi_clk = { + .halt_reg = 0x750c0, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x750c0, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x750c0, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_aggre_ufs_card_axi_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_card_axi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_aggre_ufs_card_axi_hw_ctl_clk = { + .halt_reg = 0x750c0, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x750c0, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x750c0, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_aggre_ufs_card_axi_hw_ctl_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_aggre_ufs_card_axi_clk.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch_simple_ops, + }, + }, +}; + +static struct clk_branch gcc_aggre_ufs_phy_axi_clk = { + .halt_reg = 0x770c0, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x770c0, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x770c0, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_aggre_ufs_phy_axi_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_phy_axi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_aggre_ufs_phy_axi_hw_ctl_clk = { + .halt_reg = 0x770c0, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x770c0, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x770c0, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_aggre_ufs_phy_axi_hw_ctl_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_aggre_ufs_phy_axi_clk.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch_simple_ops, + }, + }, +}; + +static struct clk_branch gcc_aggre_usb3_prim_axi_clk = { + .halt_reg = 0xf07c, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xf07c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_aggre_usb3_prim_axi_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb30_prim_master_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_aggre_usb3_sec_axi_clk = { + .halt_reg = 0x1007c, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x1007c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_aggre_usb3_sec_axi_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb30_sec_master_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_boot_rom_ahb_clk = { + .halt_reg = 0x38004, + .halt_check = BRANCH_HALT_VOTED, + .hwcg_reg = 0x38004, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(10), + .hw.init = &(struct clk_init_data){ + .name = "gcc_boot_rom_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* + * Clock ON depends on external parent 'config noc', so cant poll + * delay and also mark as crtitical for camss boot + */ +static struct clk_branch gcc_camera_ahb_clk = { + .halt_reg = 0xb008, + .halt_check = BRANCH_HALT_DELAY, + .hwcg_reg = 0xb008, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0xb008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camera_ahb_clk", + .flags = CLK_IS_CRITICAL, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camera_hf_axi_clk = { + .halt_reg = 0xb030, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xb030, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camera_hf_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camera_sf_axi_clk = { + .halt_reg = 0xb034, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xb034, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camera_sf_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* XO critical input to camss, so no need to poll */ +static struct clk_branch gcc_camera_xo_clk = { + .halt_reg = 0xb044, + .halt_check = BRANCH_HALT_DELAY, + .clkr = { + .enable_reg = 0xb044, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camera_xo_clk", + .flags = CLK_IS_CRITICAL, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_cfg_noc_usb3_prim_axi_clk = { + .halt_reg = 0xf078, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xf078, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_cfg_noc_usb3_prim_axi_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb30_prim_master_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_cfg_noc_usb3_sec_axi_clk = { + .halt_reg = 0x10078, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x10078, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_cfg_noc_usb3_sec_axi_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb30_sec_master_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_cpuss_ahb_clk = { + .halt_reg = 0x48000, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(21), + .hw.init = &(struct clk_init_data){ + .name = "gcc_cpuss_ahb_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_cpuss_ahb_clk_src.clkr.hw }, + .num_parents = 1, + /* required for cpuss */ + .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_cpuss_dvm_bus_clk = { + .halt_reg = 0x48190, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x48190, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_cpuss_dvm_bus_clk", + /* required for cpuss */ + .flags = CLK_IS_CRITICAL, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_cpuss_gnoc_clk = { + .halt_reg = 0x48004, + .halt_check = BRANCH_HALT_VOTED, + .hwcg_reg = 0x48004, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(22), + .hw.init = &(struct clk_init_data){ + .name = "gcc_cpuss_gnoc_clk", + /* required for cpuss */ + .flags = CLK_IS_CRITICAL, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_cpuss_rbcpr_clk = { + .halt_reg = 0x48008, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x48008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_cpuss_rbcpr_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ddrss_gpu_axi_clk = { + .halt_reg = 0x71154, + .halt_check = BRANCH_VOTED, + .clkr = { + .enable_reg = 0x71154, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ddrss_gpu_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* + * Clock ON depends on external parent 'config noc', so cant poll + * delay and also mark as crtitical for disp boot + */ +static struct clk_branch gcc_disp_ahb_clk = { + .halt_reg = 0xb00c, + .halt_check = BRANCH_HALT_DELAY, + .hwcg_reg = 0xb00c, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0xb00c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_disp_ahb_clk", + .flags = CLK_IS_CRITICAL, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_disp_hf_axi_clk = { + .halt_reg = 0xb038, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xb038, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_disp_hf_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_disp_sf_axi_clk = { + .halt_reg = 0xb03c, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xb03c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_disp_sf_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* XO critical input to disp, so no need to poll */ +static struct clk_branch gcc_disp_xo_clk = { + .halt_reg = 0xb048, + .halt_check = BRANCH_HALT_DELAY, + .clkr = { + .enable_reg = 0xb048, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_disp_xo_clk", + .flags = CLK_IS_CRITICAL, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_emac_axi_clk = { + .halt_reg = 0x6010, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x6010, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_emac_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_emac_ptp_clk = { + .halt_reg = 0x6034, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x6034, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_emac_ptp_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_emac_ptp_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_emac_rgmii_clk = { + .halt_reg = 0x6018, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x6018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_emac_rgmii_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_emac_rgmii_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_emac_slv_ahb_clk = { + .halt_reg = 0x6014, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x6014, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x6014, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_emac_slv_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gp1_clk = { + .halt_reg = 0x64000, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x64000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gp1_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_gp1_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gp2_clk = { + .halt_reg = 0x65000, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x65000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gp2_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_gp2_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gp3_clk = { + .halt_reg = 0x66000, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x66000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gp3_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_gp3_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gpu_cfg_ahb_clk = { + .halt_reg = 0x71004, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x71004, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x71004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gpu_cfg_ahb_clk", + /* required for gpu */ + .flags = CLK_IS_CRITICAL, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gpu_gpll0_clk_src = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(15), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gpu_gpll0_clk_src", + .parent_hws = (const struct clk_hw *[]){ + &gpll0.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gpu_gpll0_div_clk_src = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(16), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gpu_gpll0_div_clk_src", + .parent_hws = (const struct clk_hw *[]){ + &gpll0_out_even.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gpu_iref_clk = { + .halt_reg = 0x8c010, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x8c010, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gpu_iref_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gpu_memnoc_gfx_clk = { + .halt_reg = 0x7100c, + .halt_check = BRANCH_VOTED, + .clkr = { + .enable_reg = 0x7100c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gpu_memnoc_gfx_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gpu_snoc_dvm_gfx_clk = { + .halt_reg = 0x71018, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x71018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gpu_snoc_dvm_gfx_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_npu_at_clk = { + .halt_reg = 0x4d010, + .halt_check = BRANCH_VOTED, + .clkr = { + .enable_reg = 0x4d010, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_npu_at_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_npu_axi_clk = { + .halt_reg = 0x4d008, + .halt_check = BRANCH_VOTED, + .clkr = { + .enable_reg = 0x4d008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_npu_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_npu_cfg_ahb_clk = { + .halt_reg = 0x4d004, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x4d004, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x4d004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_npu_cfg_ahb_clk", + /* required for npu */ + .flags = CLK_IS_CRITICAL, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_npu_gpll0_clk_src = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(18), + .hw.init = &(struct clk_init_data){ + .name = "gcc_npu_gpll0_clk_src", + .parent_hws = (const struct clk_hw *[]){ + &gpll0.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_npu_gpll0_div_clk_src = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(19), + .hw.init = &(struct clk_init_data){ + .name = "gcc_npu_gpll0_div_clk_src", + .parent_hws = (const struct clk_hw *[]){ + &gpll0_out_even.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_npu_trig_clk = { + .halt_reg = 0x4d00c, + .halt_check = BRANCH_VOTED, + .clkr = { + .enable_reg = 0x4d00c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_npu_trig_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie0_phy_refgen_clk = { + .halt_reg = 0x6f02c, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x6f02c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie0_phy_refgen_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_pcie_phy_refgen_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie1_phy_refgen_clk = { + .halt_reg = 0x6f030, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x6f030, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie1_phy_refgen_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_pcie_phy_refgen_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_0_aux_clk = { + .halt_reg = 0x6b020, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(3), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_0_aux_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_pcie_0_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_0_cfg_ahb_clk = { + .halt_reg = 0x6b01c, + .halt_check = BRANCH_HALT_VOTED, + .hwcg_reg = 0x6b01c, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(2), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_0_cfg_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_0_clkref_clk = { + .halt_reg = 0x8c00c, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x8c00c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_0_clkref_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_0_mstr_axi_clk = { + .halt_reg = 0x6b018, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_0_mstr_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* Clock ON depends on external parent 'PIPE' clock, so dont poll */ +static struct clk_branch gcc_pcie_0_pipe_clk = { + .halt_reg = 0x6b024, + .halt_check = BRANCH_HALT_DELAY, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(4), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_0_pipe_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_0_slv_axi_clk = { + .halt_reg = 0x6b014, + .halt_check = BRANCH_HALT_VOTED, + .hwcg_reg = 0x6b014, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_0_slv_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_0_slv_q2a_axi_clk = { + .halt_reg = 0x6b010, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(5), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_0_slv_q2a_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_1_aux_clk = { + .halt_reg = 0x8d020, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(29), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_1_aux_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_pcie_1_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_1_cfg_ahb_clk = { + .halt_reg = 0x8d01c, + .halt_check = BRANCH_HALT_VOTED, + .hwcg_reg = 0x8d01c, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(28), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_1_cfg_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_1_clkref_clk = { + .halt_reg = 0x8c02c, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x8c02c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_1_clkref_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_1_mstr_axi_clk = { + .halt_reg = 0x8d018, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(27), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_1_mstr_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* Clock ON depends on external parent 'PIPE' clock, so dont poll */ +static struct clk_branch gcc_pcie_1_pipe_clk = { + .halt_reg = 0x8d024, + .halt_check = BRANCH_HALT_DELAY, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(30), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_1_pipe_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_1_slv_axi_clk = { + .halt_reg = 0x8d014, + .halt_check = BRANCH_HALT_VOTED, + .hwcg_reg = 0x8d014, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(26), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_1_slv_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_1_slv_q2a_axi_clk = { + .halt_reg = 0x8d010, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(25), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_1_slv_q2a_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_phy_aux_clk = { + .halt_reg = 0x6f004, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x6f004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_phy_aux_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_pcie_0_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pdm2_clk = { + .halt_reg = 0x3300c, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x3300c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pdm2_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_pdm2_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pdm_ahb_clk = { + .halt_reg = 0x33004, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x33004, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x33004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pdm_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pdm_xo4_clk = { + .halt_reg = 0x33008, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x33008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pdm_xo4_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_prng_ahb_clk = { + .halt_reg = 0x34004, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(13), + .hw.init = &(struct clk_init_data){ + .name = "gcc_prng_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qmip_camera_nrt_ahb_clk = { + .halt_reg = 0xb018, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0xb018, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0xb018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qmip_camera_nrt_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qmip_camera_rt_ahb_clk = { + .halt_reg = 0xb01c, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0xb01c, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0xb01c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qmip_camera_rt_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qmip_disp_ahb_clk = { + .halt_reg = 0xb020, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0xb020, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0xb020, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qmip_disp_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qmip_video_cvp_ahb_clk = { + .halt_reg = 0xb010, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0xb010, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0xb010, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qmip_video_cvp_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qmip_video_vcodec_ahb_clk = { + .halt_reg = 0xb014, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0xb014, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0xb014, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qmip_video_vcodec_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qspi_cnoc_periph_ahb_clk = { + .halt_reg = 0x4b000, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x4b000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qspi_cnoc_periph_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qspi_core_clk = { + .halt_reg = 0x4b004, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x4b004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qspi_core_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qspi_core_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap0_s0_clk = { + .halt_reg = 0x17144, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(10), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s0_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap0_s0_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap0_s1_clk = { + .halt_reg = 0x17274, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(11), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s1_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap0_s1_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap0_s2_clk = { + .halt_reg = 0x173a4, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(12), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s2_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap0_s2_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap0_s3_clk = { + .halt_reg = 0x174d4, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(13), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s3_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap0_s3_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap0_s4_clk = { + .halt_reg = 0x17604, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(14), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s4_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap0_s4_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap0_s5_clk = { + .halt_reg = 0x17734, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(15), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s5_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap0_s5_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap0_s6_clk = { + .halt_reg = 0x17864, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(16), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s6_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap0_s6_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap0_s7_clk = { + .halt_reg = 0x17994, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(17), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s7_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap0_s7_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap1_s0_clk = { + .halt_reg = 0x18144, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(22), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s0_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap1_s0_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap1_s1_clk = { + .halt_reg = 0x18274, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(23), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s1_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap1_s1_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap1_s2_clk = { + .halt_reg = 0x183a4, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(24), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s2_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap1_s2_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap1_s3_clk = { + .halt_reg = 0x184d4, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(25), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s3_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap1_s3_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap1_s4_clk = { + .halt_reg = 0x18604, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(26), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s4_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap1_s4_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap1_s5_clk = { + .halt_reg = 0x18734, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(27), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s5_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap1_s5_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap2_s0_clk = { + .halt_reg = 0x1e144, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52014, + .enable_mask = BIT(4), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s0_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap2_s0_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap2_s1_clk = { + .halt_reg = 0x1e274, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52014, + .enable_mask = BIT(5), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s1_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap2_s1_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap2_s2_clk = { + .halt_reg = 0x1e3a4, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52014, + .enable_mask = BIT(6), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s2_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap2_s2_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap2_s3_clk = { + .halt_reg = 0x1e4d4, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52014, + .enable_mask = BIT(7), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s3_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap2_s3_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap2_s4_clk = { + .halt_reg = 0x1e604, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52014, + .enable_mask = BIT(8), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s4_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap2_s4_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap2_s5_clk = { + .halt_reg = 0x1e734, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52014, + .enable_mask = BIT(9), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s5_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap2_s5_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap_0_m_ahb_clk = { + .halt_reg = 0x17004, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(6), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap_0_m_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap_0_s_ahb_clk = { + .halt_reg = 0x17008, + .halt_check = BRANCH_HALT_VOTED, + .hwcg_reg = 0x17008, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(7), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap_0_s_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap_1_m_ahb_clk = { + .halt_reg = 0x18004, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(20), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap_1_m_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap_1_s_ahb_clk = { + .halt_reg = 0x18008, + .halt_check = BRANCH_HALT_VOTED, + .hwcg_reg = 0x18008, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(21), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap_1_s_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap_2_m_ahb_clk = { + .halt_reg = 0x1e004, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52014, + .enable_mask = BIT(2), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap_2_m_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap_2_s_ahb_clk = { + .halt_reg = 0x1e008, + .halt_check = BRANCH_HALT_VOTED, + .hwcg_reg = 0x1e008, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x52014, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap_2_s_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sdcc2_ahb_clk = { + .halt_reg = 0x14008, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x14008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc2_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sdcc2_apps_clk = { + .halt_reg = 0x14004, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x14004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc2_apps_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_sdcc2_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sdcc4_ahb_clk = { + .halt_reg = 0x16008, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x16008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc4_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sdcc4_apps_clk = { + .halt_reg = 0x16004, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x16004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc4_apps_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_sdcc4_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sys_noc_cpuss_ahb_clk = { + .halt_reg = 0x4819c, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sys_noc_cpuss_ahb_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_cpuss_ahb_clk_src.clkr.hw }, + .num_parents = 1, + /* required for cpuss */ + .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_tsif_ahb_clk = { + .halt_reg = 0x36004, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x36004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_tsif_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_tsif_inactivity_timers_clk = { + .halt_reg = 0x3600c, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x3600c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_tsif_inactivity_timers_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_tsif_ref_clk = { + .halt_reg = 0x36008, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x36008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_tsif_ref_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_tsif_ref_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_card_ahb_clk = { + .halt_reg = 0x75014, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x75014, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x75014, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_card_axi_clk = { + .halt_reg = 0x75010, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x75010, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x75010, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_axi_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_card_axi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_card_axi_hw_ctl_clk = { + .halt_reg = 0x75010, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x75010, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x75010, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_axi_hw_ctl_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_card_axi_clk.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch_simple_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_card_clkref_clk = { + .halt_reg = 0x8c004, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x8c004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_clkref_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_card_ice_core_clk = { + .halt_reg = 0x7505c, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x7505c, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x7505c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_ice_core_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_card_ice_core_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_card_ice_core_hw_ctl_clk = { + .halt_reg = 0x7505c, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x7505c, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x7505c, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_ice_core_hw_ctl_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_card_ice_core_clk.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch_simple_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_card_phy_aux_clk = { + .halt_reg = 0x75090, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x75090, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x75090, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_phy_aux_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_card_phy_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_card_phy_aux_hw_ctl_clk = { + .halt_reg = 0x75090, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x75090, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x75090, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_phy_aux_hw_ctl_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_card_phy_aux_clk.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch_simple_ops, + }, + }, +}; + +/* external clocks so add BRANCH_HALT_SKIP */ +static struct clk_branch gcc_ufs_card_rx_symbol_0_clk = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x7501c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_rx_symbol_0_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* external clocks so add BRANCH_HALT_SKIP */ +static struct clk_branch gcc_ufs_card_rx_symbol_1_clk = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x750ac, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_rx_symbol_1_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* external clocks so add BRANCH_HALT_SKIP */ +static struct clk_branch gcc_ufs_card_tx_symbol_0_clk = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x75018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_tx_symbol_0_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_card_unipro_core_clk = { + .halt_reg = 0x75058, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x75058, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x75058, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_unipro_core_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_card_unipro_core_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_card_unipro_core_hw_ctl_clk = { + .halt_reg = 0x75058, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x75058, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x75058, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_unipro_core_hw_ctl_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_card_unipro_core_clk.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch_simple_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_mem_clkref_clk = { + .halt_reg = 0x8c000, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x8c000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_mem_clkref_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_phy_ahb_clk = { + .halt_reg = 0x77014, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x77014, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x77014, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_phy_axi_clk = { + .halt_reg = 0x77010, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x77010, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x77010, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_axi_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_phy_axi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_phy_axi_hw_ctl_clk = { + .halt_reg = 0x77010, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x77010, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x77010, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_axi_hw_ctl_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_phy_axi_clk.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch_simple_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_phy_ice_core_clk = { + .halt_reg = 0x7705c, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x7705c, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x7705c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_ice_core_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_phy_ice_core_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_phy_ice_core_hw_ctl_clk = { + .halt_reg = 0x7705c, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x7705c, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x7705c, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_ice_core_hw_ctl_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_phy_ice_core_clk.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch_simple_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_phy_phy_aux_clk = { + .halt_reg = 0x77090, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x77090, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x77090, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_phy_aux_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_phy_phy_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_phy_phy_aux_hw_ctl_clk = { + .halt_reg = 0x77090, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x77090, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x77090, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_phy_aux_hw_ctl_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_phy_phy_aux_clk.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch_simple_ops, + }, + }, +}; + +/* external clocks so add BRANCH_HALT_SKIP */ +static struct clk_branch gcc_ufs_phy_rx_symbol_0_clk = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x7701c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_rx_symbol_0_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* external clocks so add BRANCH_HALT_SKIP */ +static struct clk_branch gcc_ufs_phy_rx_symbol_1_clk = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x770ac, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_rx_symbol_1_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* external clocks so add BRANCH_HALT_SKIP */ +static struct clk_branch gcc_ufs_phy_tx_symbol_0_clk = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x77018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_tx_symbol_0_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_phy_unipro_core_clk = { + .halt_reg = 0x77058, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x77058, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x77058, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_unipro_core_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_phy_unipro_core_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_phy_unipro_core_hw_ctl_clk = { + .halt_reg = 0x77058, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x77058, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x77058, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_unipro_core_hw_ctl_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_phy_unipro_core_clk.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch_simple_ops, + }, + }, +}; + +static struct clk_branch gcc_usb30_prim_master_clk = { + .halt_reg = 0xf010, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xf010, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb30_prim_master_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb30_prim_master_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb30_prim_mock_utmi_clk = { + .halt_reg = 0xf018, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xf018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb30_prim_mock_utmi_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb30_prim_mock_utmi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb30_prim_sleep_clk = { + .halt_reg = 0xf014, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xf014, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb30_prim_sleep_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb30_sec_master_clk = { + .halt_reg = 0x10010, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x10010, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb30_sec_master_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb30_sec_master_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb30_sec_mock_utmi_clk = { + .halt_reg = 0x10018, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x10018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb30_sec_mock_utmi_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb30_sec_mock_utmi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb30_sec_sleep_clk = { + .halt_reg = 0x10014, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x10014, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb30_sec_sleep_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb3_prim_clkref_clk = { + .halt_reg = 0x8c008, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x8c008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_prim_clkref_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb3_prim_phy_aux_clk = { + .halt_reg = 0xf050, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xf050, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_prim_phy_aux_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb3_prim_phy_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb3_prim_phy_com_aux_clk = { + .halt_reg = 0xf054, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xf054, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_prim_phy_com_aux_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb3_prim_phy_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb3_prim_phy_pipe_clk = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0xf058, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_prim_phy_pipe_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb3_sec_clkref_clk = { + .halt_reg = 0x8c028, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x8c028, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_sec_clkref_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb3_sec_phy_aux_clk = { + .halt_reg = 0x10050, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x10050, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_sec_phy_aux_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb3_sec_phy_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb3_sec_phy_com_aux_clk = { + .halt_reg = 0x10054, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x10054, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_sec_phy_com_aux_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb3_sec_phy_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb3_sec_phy_pipe_clk = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x10058, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_sec_phy_pipe_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* + * Clock ON depends on external parent 'config noc', so cant poll + * delay and also mark as crtitical for video boot + */ +static struct clk_branch gcc_video_ahb_clk = { + .halt_reg = 0xb004, + .halt_check = BRANCH_HALT_DELAY, + .hwcg_reg = 0xb004, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0xb004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_video_ahb_clk", + .flags = CLK_IS_CRITICAL, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_video_axi0_clk = { + .halt_reg = 0xb024, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xb024, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_video_axi0_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_video_axi1_clk = { + .halt_reg = 0xb028, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xb028, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_video_axi1_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_video_axic_clk = { + .halt_reg = 0xb02c, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xb02c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_video_axic_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* XO critical input to video, so no need to poll */ +static struct clk_branch gcc_video_xo_clk = { + .halt_reg = 0xb040, + .halt_check = BRANCH_HALT_DELAY, + .clkr = { + .enable_reg = 0xb040, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_video_xo_clk", + .flags = CLK_IS_CRITICAL, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct gdsc pcie_0_gdsc = { + .gdscr = 0x6b004, + .pd = { + .name = "pcie_0_gdsc", + }, + .pwrsts = PWRSTS_OFF_ON, + .flags = POLL_CFG_GDSCR, +}; + +static struct gdsc pcie_1_gdsc = { + .gdscr = 0x8d004, + .pd = { + .name = "pcie_1_gdsc", + }, + .pwrsts = PWRSTS_OFF_ON, + .flags = POLL_CFG_GDSCR, +}; + +static struct gdsc ufs_card_gdsc = { + .gdscr = 0x75004, + .pd = { + .name = "ufs_card_gdsc", + }, + .pwrsts = PWRSTS_OFF_ON, + .flags = POLL_CFG_GDSCR, +}; + +static struct gdsc ufs_phy_gdsc = { + .gdscr = 0x77004, + .pd = { + .name = "ufs_phy_gdsc", + }, + .pwrsts = PWRSTS_OFF_ON, + .flags = POLL_CFG_GDSCR, +}; + +static struct gdsc emac_gdsc = { + .gdscr = 0x6004, + .pd = { + .name = "emac_gdsc", + }, + .pwrsts = PWRSTS_OFF_ON, + .flags = POLL_CFG_GDSCR, +}; + +static struct gdsc usb30_prim_gdsc = { + .gdscr = 0xf004, + .pd = { + .name = "usb30_prim_gdsc", + }, + .pwrsts = PWRSTS_OFF_ON, + .flags = POLL_CFG_GDSCR, +}; + +static struct gdsc usb30_sec_gdsc = { + .gdscr = 0x10004, + .pd = { + .name = "usb30_sec_gdsc", + }, + .pwrsts = PWRSTS_OFF_ON, + .flags = POLL_CFG_GDSCR, +}; + +static struct clk_regmap *gcc_sm8150_clocks[] = { + [GCC_AGGRE_NOC_PCIE_TBU_CLK] = &gcc_aggre_noc_pcie_tbu_clk.clkr, + [GCC_AGGRE_UFS_CARD_AXI_CLK] = &gcc_aggre_ufs_card_axi_clk.clkr, + [GCC_AGGRE_UFS_CARD_AXI_HW_CTL_CLK] = + &gcc_aggre_ufs_card_axi_hw_ctl_clk.clkr, + [GCC_AGGRE_UFS_PHY_AXI_CLK] = &gcc_aggre_ufs_phy_axi_clk.clkr, + [GCC_AGGRE_UFS_PHY_AXI_HW_CTL_CLK] = + &gcc_aggre_ufs_phy_axi_hw_ctl_clk.clkr, + [GCC_AGGRE_USB3_PRIM_AXI_CLK] = &gcc_aggre_usb3_prim_axi_clk.clkr, + [GCC_AGGRE_USB3_SEC_AXI_CLK] = &gcc_aggre_usb3_sec_axi_clk.clkr, + [GCC_BOOT_ROM_AHB_CLK] = &gcc_boot_rom_ahb_clk.clkr, + [GCC_CAMERA_AHB_CLK] = &gcc_camera_ahb_clk.clkr, + [GCC_CAMERA_HF_AXI_CLK] = &gcc_camera_hf_axi_clk.clkr, + [GCC_CAMERA_SF_AXI_CLK] = &gcc_camera_sf_axi_clk.clkr, + [GCC_CAMERA_XO_CLK] = &gcc_camera_xo_clk.clkr, + [GCC_CFG_NOC_USB3_PRIM_AXI_CLK] = &gcc_cfg_noc_usb3_prim_axi_clk.clkr, + [GCC_CFG_NOC_USB3_SEC_AXI_CLK] = &gcc_cfg_noc_usb3_sec_axi_clk.clkr, + [GCC_CPUSS_AHB_CLK] = &gcc_cpuss_ahb_clk.clkr, + [GCC_CPUSS_AHB_CLK_SRC] = &gcc_cpuss_ahb_clk_src.clkr, + [GCC_CPUSS_DVM_BUS_CLK] = &gcc_cpuss_dvm_bus_clk.clkr, + [GCC_CPUSS_GNOC_CLK] = &gcc_cpuss_gnoc_clk.clkr, + [GCC_CPUSS_RBCPR_CLK] = &gcc_cpuss_rbcpr_clk.clkr, + [GCC_DDRSS_GPU_AXI_CLK] = &gcc_ddrss_gpu_axi_clk.clkr, + [GCC_DISP_AHB_CLK] = &gcc_disp_ahb_clk.clkr, + [GCC_DISP_HF_AXI_CLK] = &gcc_disp_hf_axi_clk.clkr, + [GCC_DISP_SF_AXI_CLK] = &gcc_disp_sf_axi_clk.clkr, + [GCC_DISP_XO_CLK] = &gcc_disp_xo_clk.clkr, + [GCC_EMAC_AXI_CLK] = &gcc_emac_axi_clk.clkr, + [GCC_EMAC_PTP_CLK] = &gcc_emac_ptp_clk.clkr, + [GCC_EMAC_PTP_CLK_SRC] = &gcc_emac_ptp_clk_src.clkr, + [GCC_EMAC_RGMII_CLK] = &gcc_emac_rgmii_clk.clkr, + [GCC_EMAC_RGMII_CLK_SRC] = &gcc_emac_rgmii_clk_src.clkr, + [GCC_EMAC_SLV_AHB_CLK] = &gcc_emac_slv_ahb_clk.clkr, + [GCC_GP1_CLK] = &gcc_gp1_clk.clkr, + [GCC_GP1_CLK_SRC] = &gcc_gp1_clk_src.clkr, + [GCC_GP2_CLK] = &gcc_gp2_clk.clkr, + [GCC_GP2_CLK_SRC] = &gcc_gp2_clk_src.clkr, + [GCC_GP3_CLK] = &gcc_gp3_clk.clkr, + [GCC_GP3_CLK_SRC] = &gcc_gp3_clk_src.clkr, + [GCC_GPU_CFG_AHB_CLK] = &gcc_gpu_cfg_ahb_clk.clkr, + [GCC_GPU_GPLL0_CLK_SRC] = &gcc_gpu_gpll0_clk_src.clkr, + [GCC_GPU_GPLL0_DIV_CLK_SRC] = &gcc_gpu_gpll0_div_clk_src.clkr, + [GCC_GPU_IREF_CLK] = &gcc_gpu_iref_clk.clkr, + [GCC_GPU_MEMNOC_GFX_CLK] = &gcc_gpu_memnoc_gfx_clk.clkr, + [GCC_GPU_SNOC_DVM_GFX_CLK] = &gcc_gpu_snoc_dvm_gfx_clk.clkr, + [GCC_NPU_AT_CLK] = &gcc_npu_at_clk.clkr, + [GCC_NPU_AXI_CLK] = &gcc_npu_axi_clk.clkr, + [GCC_NPU_CFG_AHB_CLK] = &gcc_npu_cfg_ahb_clk.clkr, + [GCC_NPU_GPLL0_CLK_SRC] = &gcc_npu_gpll0_clk_src.clkr, + [GCC_NPU_GPLL0_DIV_CLK_SRC] = &gcc_npu_gpll0_div_clk_src.clkr, + [GCC_NPU_TRIG_CLK] = &gcc_npu_trig_clk.clkr, + [GCC_PCIE0_PHY_REFGEN_CLK] = &gcc_pcie0_phy_refgen_clk.clkr, + [GCC_PCIE1_PHY_REFGEN_CLK] = &gcc_pcie1_phy_refgen_clk.clkr, + [GCC_PCIE_0_AUX_CLK] = &gcc_pcie_0_aux_clk.clkr, + [GCC_PCIE_0_AUX_CLK_SRC] = &gcc_pcie_0_aux_clk_src.clkr, + [GCC_PCIE_0_CFG_AHB_CLK] = &gcc_pcie_0_cfg_ahb_clk.clkr, + [GCC_PCIE_0_CLKREF_CLK] = &gcc_pcie_0_clkref_clk.clkr, + [GCC_PCIE_0_MSTR_AXI_CLK] = &gcc_pcie_0_mstr_axi_clk.clkr, + [GCC_PCIE_0_PIPE_CLK] = &gcc_pcie_0_pipe_clk.clkr, + [GCC_PCIE_0_SLV_AXI_CLK] = &gcc_pcie_0_slv_axi_clk.clkr, + [GCC_PCIE_0_SLV_Q2A_AXI_CLK] = &gcc_pcie_0_slv_q2a_axi_clk.clkr, + [GCC_PCIE_1_AUX_CLK] = &gcc_pcie_1_aux_clk.clkr, + [GCC_PCIE_1_AUX_CLK_SRC] = &gcc_pcie_1_aux_clk_src.clkr, + [GCC_PCIE_1_CFG_AHB_CLK] = &gcc_pcie_1_cfg_ahb_clk.clkr, + [GCC_PCIE_1_CLKREF_CLK] = &gcc_pcie_1_clkref_clk.clkr, + [GCC_PCIE_1_MSTR_AXI_CLK] = &gcc_pcie_1_mstr_axi_clk.clkr, + [GCC_PCIE_1_PIPE_CLK] = &gcc_pcie_1_pipe_clk.clkr, + [GCC_PCIE_1_SLV_AXI_CLK] = &gcc_pcie_1_slv_axi_clk.clkr, + [GCC_PCIE_1_SLV_Q2A_AXI_CLK] = &gcc_pcie_1_slv_q2a_axi_clk.clkr, + [GCC_PCIE_PHY_AUX_CLK] = &gcc_pcie_phy_aux_clk.clkr, + [GCC_PCIE_PHY_REFGEN_CLK_SRC] = &gcc_pcie_phy_refgen_clk_src.clkr, + [GCC_PDM2_CLK] = &gcc_pdm2_clk.clkr, + [GCC_PDM2_CLK_SRC] = &gcc_pdm2_clk_src.clkr, + [GCC_PDM_AHB_CLK] = &gcc_pdm_ahb_clk.clkr, + [GCC_PDM_XO4_CLK] = &gcc_pdm_xo4_clk.clkr, + [GCC_PRNG_AHB_CLK] = &gcc_prng_ahb_clk.clkr, + [GCC_QMIP_CAMERA_NRT_AHB_CLK] = &gcc_qmip_camera_nrt_ahb_clk.clkr, + [GCC_QMIP_CAMERA_RT_AHB_CLK] = &gcc_qmip_camera_rt_ahb_clk.clkr, + [GCC_QMIP_DISP_AHB_CLK] = &gcc_qmip_disp_ahb_clk.clkr, + [GCC_QMIP_VIDEO_CVP_AHB_CLK] = &gcc_qmip_video_cvp_ahb_clk.clkr, + [GCC_QMIP_VIDEO_VCODEC_AHB_CLK] = &gcc_qmip_video_vcodec_ahb_clk.clkr, + [GCC_QSPI_CNOC_PERIPH_AHB_CLK] = &gcc_qspi_cnoc_periph_ahb_clk.clkr, + [GCC_QSPI_CORE_CLK] = &gcc_qspi_core_clk.clkr, + [GCC_QSPI_CORE_CLK_SRC] = &gcc_qspi_core_clk_src.clkr, + [GCC_QUPV3_WRAP0_S0_CLK] = &gcc_qupv3_wrap0_s0_clk.clkr, + [GCC_QUPV3_WRAP0_S0_CLK_SRC] = &gcc_qupv3_wrap0_s0_clk_src.clkr, + [GCC_QUPV3_WRAP0_S1_CLK] = &gcc_qupv3_wrap0_s1_clk.clkr, + [GCC_QUPV3_WRAP0_S1_CLK_SRC] = &gcc_qupv3_wrap0_s1_clk_src.clkr, + [GCC_QUPV3_WRAP0_S2_CLK] = &gcc_qupv3_wrap0_s2_clk.clkr, + [GCC_QUPV3_WRAP0_S2_CLK_SRC] = &gcc_qupv3_wrap0_s2_clk_src.clkr, + [GCC_QUPV3_WRAP0_S3_CLK] = &gcc_qupv3_wrap0_s3_clk.clkr, + [GCC_QUPV3_WRAP0_S3_CLK_SRC] = &gcc_qupv3_wrap0_s3_clk_src.clkr, + [GCC_QUPV3_WRAP0_S4_CLK] = &gcc_qupv3_wrap0_s4_clk.clkr, + [GCC_QUPV3_WRAP0_S4_CLK_SRC] = &gcc_qupv3_wrap0_s4_clk_src.clkr, + [GCC_QUPV3_WRAP0_S5_CLK] = &gcc_qupv3_wrap0_s5_clk.clkr, + [GCC_QUPV3_WRAP0_S5_CLK_SRC] = &gcc_qupv3_wrap0_s5_clk_src.clkr, + [GCC_QUPV3_WRAP0_S6_CLK] = &gcc_qupv3_wrap0_s6_clk.clkr, + [GCC_QUPV3_WRAP0_S6_CLK_SRC] = &gcc_qupv3_wrap0_s6_clk_src.clkr, + [GCC_QUPV3_WRAP0_S7_CLK] = &gcc_qupv3_wrap0_s7_clk.clkr, + [GCC_QUPV3_WRAP0_S7_CLK_SRC] = &gcc_qupv3_wrap0_s7_clk_src.clkr, + [GCC_QUPV3_WRAP1_S0_CLK] = &gcc_qupv3_wrap1_s0_clk.clkr, + [GCC_QUPV3_WRAP1_S0_CLK_SRC] = &gcc_qupv3_wrap1_s0_clk_src.clkr, + [GCC_QUPV3_WRAP1_S1_CLK] = &gcc_qupv3_wrap1_s1_clk.clkr, + [GCC_QUPV3_WRAP1_S1_CLK_SRC] = &gcc_qupv3_wrap1_s1_clk_src.clkr, + [GCC_QUPV3_WRAP1_S2_CLK] = &gcc_qupv3_wrap1_s2_clk.clkr, + [GCC_QUPV3_WRAP1_S2_CLK_SRC] = &gcc_qupv3_wrap1_s2_clk_src.clkr, + [GCC_QUPV3_WRAP1_S3_CLK] = &gcc_qupv3_wrap1_s3_clk.clkr, + [GCC_QUPV3_WRAP1_S3_CLK_SRC] = &gcc_qupv3_wrap1_s3_clk_src.clkr, + [GCC_QUPV3_WRAP1_S4_CLK] = &gcc_qupv3_wrap1_s4_clk.clkr, + [GCC_QUPV3_WRAP1_S4_CLK_SRC] = &gcc_qupv3_wrap1_s4_clk_src.clkr, + [GCC_QUPV3_WRAP1_S5_CLK] = &gcc_qupv3_wrap1_s5_clk.clkr, + [GCC_QUPV3_WRAP1_S5_CLK_SRC] = &gcc_qupv3_wrap1_s5_clk_src.clkr, + [GCC_QUPV3_WRAP2_S0_CLK] = &gcc_qupv3_wrap2_s0_clk.clkr, + [GCC_QUPV3_WRAP2_S0_CLK_SRC] = &gcc_qupv3_wrap2_s0_clk_src.clkr, + [GCC_QUPV3_WRAP2_S1_CLK] = &gcc_qupv3_wrap2_s1_clk.clkr, + [GCC_QUPV3_WRAP2_S1_CLK_SRC] = &gcc_qupv3_wrap2_s1_clk_src.clkr, + [GCC_QUPV3_WRAP2_S2_CLK] = &gcc_qupv3_wrap2_s2_clk.clkr, + [GCC_QUPV3_WRAP2_S2_CLK_SRC] = &gcc_qupv3_wrap2_s2_clk_src.clkr, + [GCC_QUPV3_WRAP2_S3_CLK] = &gcc_qupv3_wrap2_s3_clk.clkr, + [GCC_QUPV3_WRAP2_S3_CLK_SRC] = &gcc_qupv3_wrap2_s3_clk_src.clkr, + [GCC_QUPV3_WRAP2_S4_CLK] = &gcc_qupv3_wrap2_s4_clk.clkr, + [GCC_QUPV3_WRAP2_S4_CLK_SRC] = &gcc_qupv3_wrap2_s4_clk_src.clkr, + [GCC_QUPV3_WRAP2_S5_CLK] = &gcc_qupv3_wrap2_s5_clk.clkr, + [GCC_QUPV3_WRAP2_S5_CLK_SRC] = &gcc_qupv3_wrap2_s5_clk_src.clkr, + [GCC_QUPV3_WRAP_0_M_AHB_CLK] = &gcc_qupv3_wrap_0_m_ahb_clk.clkr, + [GCC_QUPV3_WRAP_0_S_AHB_CLK] = &gcc_qupv3_wrap_0_s_ahb_clk.clkr, + [GCC_QUPV3_WRAP_1_M_AHB_CLK] = &gcc_qupv3_wrap_1_m_ahb_clk.clkr, + [GCC_QUPV3_WRAP_1_S_AHB_CLK] = &gcc_qupv3_wrap_1_s_ahb_clk.clkr, + [GCC_QUPV3_WRAP_2_M_AHB_CLK] = &gcc_qupv3_wrap_2_m_ahb_clk.clkr, + [GCC_QUPV3_WRAP_2_S_AHB_CLK] = &gcc_qupv3_wrap_2_s_ahb_clk.clkr, + [GCC_SDCC2_AHB_CLK] = &gcc_sdcc2_ahb_clk.clkr, + [GCC_SDCC2_APPS_CLK] = &gcc_sdcc2_apps_clk.clkr, + [GCC_SDCC2_APPS_CLK_SRC] = &gcc_sdcc2_apps_clk_src.clkr, + [GCC_SDCC4_AHB_CLK] = &gcc_sdcc4_ahb_clk.clkr, + [GCC_SDCC4_APPS_CLK] = &gcc_sdcc4_apps_clk.clkr, + [GCC_SDCC4_APPS_CLK_SRC] = &gcc_sdcc4_apps_clk_src.clkr, + [GCC_SYS_NOC_CPUSS_AHB_CLK] = &gcc_sys_noc_cpuss_ahb_clk.clkr, + [GCC_TSIF_AHB_CLK] = &gcc_tsif_ahb_clk.clkr, + [GCC_TSIF_INACTIVITY_TIMERS_CLK] = &gcc_tsif_inactivity_timers_clk.clkr, + [GCC_TSIF_REF_CLK] = &gcc_tsif_ref_clk.clkr, + [GCC_TSIF_REF_CLK_SRC] = &gcc_tsif_ref_clk_src.clkr, + [GCC_UFS_CARD_AHB_CLK] = &gcc_ufs_card_ahb_clk.clkr, + [GCC_UFS_CARD_AXI_CLK] = &gcc_ufs_card_axi_clk.clkr, + [GCC_UFS_CARD_AXI_CLK_SRC] = &gcc_ufs_card_axi_clk_src.clkr, + [GCC_UFS_CARD_AXI_HW_CTL_CLK] = &gcc_ufs_card_axi_hw_ctl_clk.clkr, + [GCC_UFS_CARD_CLKREF_CLK] = &gcc_ufs_card_clkref_clk.clkr, + [GCC_UFS_CARD_ICE_CORE_CLK] = &gcc_ufs_card_ice_core_clk.clkr, + [GCC_UFS_CARD_ICE_CORE_CLK_SRC] = &gcc_ufs_card_ice_core_clk_src.clkr, + [GCC_UFS_CARD_ICE_CORE_HW_CTL_CLK] = + &gcc_ufs_card_ice_core_hw_ctl_clk.clkr, + [GCC_UFS_CARD_PHY_AUX_CLK] = &gcc_ufs_card_phy_aux_clk.clkr, + [GCC_UFS_CARD_PHY_AUX_CLK_SRC] = &gcc_ufs_card_phy_aux_clk_src.clkr, + [GCC_UFS_CARD_PHY_AUX_HW_CTL_CLK] = + &gcc_ufs_card_phy_aux_hw_ctl_clk.clkr, + [GCC_UFS_CARD_RX_SYMBOL_0_CLK] = &gcc_ufs_card_rx_symbol_0_clk.clkr, + [GCC_UFS_CARD_RX_SYMBOL_1_CLK] = &gcc_ufs_card_rx_symbol_1_clk.clkr, + [GCC_UFS_CARD_TX_SYMBOL_0_CLK] = &gcc_ufs_card_tx_symbol_0_clk.clkr, + [GCC_UFS_CARD_UNIPRO_CORE_CLK] = &gcc_ufs_card_unipro_core_clk.clkr, + [GCC_UFS_CARD_UNIPRO_CORE_CLK_SRC] = + &gcc_ufs_card_unipro_core_clk_src.clkr, + [GCC_UFS_CARD_UNIPRO_CORE_HW_CTL_CLK] = + &gcc_ufs_card_unipro_core_hw_ctl_clk.clkr, + [GCC_UFS_MEM_CLKREF_CLK] = &gcc_ufs_mem_clkref_clk.clkr, + [GCC_UFS_PHY_AHB_CLK] = &gcc_ufs_phy_ahb_clk.clkr, + [GCC_UFS_PHY_AXI_CLK] = &gcc_ufs_phy_axi_clk.clkr, + [GCC_UFS_PHY_AXI_CLK_SRC] = &gcc_ufs_phy_axi_clk_src.clkr, + [GCC_UFS_PHY_AXI_HW_CTL_CLK] = &gcc_ufs_phy_axi_hw_ctl_clk.clkr, + [GCC_UFS_PHY_ICE_CORE_CLK] = &gcc_ufs_phy_ice_core_clk.clkr, + [GCC_UFS_PHY_ICE_CORE_CLK_SRC] = &gcc_ufs_phy_ice_core_clk_src.clkr, + [GCC_UFS_PHY_ICE_CORE_HW_CTL_CLK] = + &gcc_ufs_phy_ice_core_hw_ctl_clk.clkr, + [GCC_UFS_PHY_PHY_AUX_CLK] = &gcc_ufs_phy_phy_aux_clk.clkr, + [GCC_UFS_PHY_PHY_AUX_CLK_SRC] = &gcc_ufs_phy_phy_aux_clk_src.clkr, + [GCC_UFS_PHY_PHY_AUX_HW_CTL_CLK] = &gcc_ufs_phy_phy_aux_hw_ctl_clk.clkr, + [GCC_UFS_PHY_RX_SYMBOL_0_CLK] = &gcc_ufs_phy_rx_symbol_0_clk.clkr, + [GCC_UFS_PHY_RX_SYMBOL_1_CLK] = &gcc_ufs_phy_rx_symbol_1_clk.clkr, + [GCC_UFS_PHY_TX_SYMBOL_0_CLK] = &gcc_ufs_phy_tx_symbol_0_clk.clkr, + [GCC_UFS_PHY_UNIPRO_CORE_CLK] = &gcc_ufs_phy_unipro_core_clk.clkr, + [GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC] = + &gcc_ufs_phy_unipro_core_clk_src.clkr, + [GCC_UFS_PHY_UNIPRO_CORE_HW_CTL_CLK] = + &gcc_ufs_phy_unipro_core_hw_ctl_clk.clkr, + [GCC_USB30_PRIM_MASTER_CLK] = &gcc_usb30_prim_master_clk.clkr, + [GCC_USB30_PRIM_MASTER_CLK_SRC] = &gcc_usb30_prim_master_clk_src.clkr, + [GCC_USB30_PRIM_MOCK_UTMI_CLK] = &gcc_usb30_prim_mock_utmi_clk.clkr, + [GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC] = + &gcc_usb30_prim_mock_utmi_clk_src.clkr, + [GCC_USB30_PRIM_SLEEP_CLK] = &gcc_usb30_prim_sleep_clk.clkr, + [GCC_USB30_SEC_MASTER_CLK] = &gcc_usb30_sec_master_clk.clkr, + [GCC_USB30_SEC_MASTER_CLK_SRC] = &gcc_usb30_sec_master_clk_src.clkr, + [GCC_USB30_SEC_MOCK_UTMI_CLK] = &gcc_usb30_sec_mock_utmi_clk.clkr, + [GCC_USB30_SEC_MOCK_UTMI_CLK_SRC] = + &gcc_usb30_sec_mock_utmi_clk_src.clkr, + [GCC_USB30_SEC_SLEEP_CLK] = &gcc_usb30_sec_sleep_clk.clkr, + [GCC_USB3_PRIM_CLKREF_CLK] = &gcc_usb3_prim_clkref_clk.clkr, + [GCC_USB3_PRIM_PHY_AUX_CLK] = &gcc_usb3_prim_phy_aux_clk.clkr, + [GCC_USB3_PRIM_PHY_AUX_CLK_SRC] = &gcc_usb3_prim_phy_aux_clk_src.clkr, + [GCC_USB3_PRIM_PHY_COM_AUX_CLK] = &gcc_usb3_prim_phy_com_aux_clk.clkr, + [GCC_USB3_PRIM_PHY_PIPE_CLK] = &gcc_usb3_prim_phy_pipe_clk.clkr, + [GCC_USB3_SEC_CLKREF_CLK] = &gcc_usb3_sec_clkref_clk.clkr, + [GCC_USB3_SEC_PHY_AUX_CLK] = &gcc_usb3_sec_phy_aux_clk.clkr, + [GCC_USB3_SEC_PHY_AUX_CLK_SRC] = &gcc_usb3_sec_phy_aux_clk_src.clkr, + [GCC_USB3_SEC_PHY_COM_AUX_CLK] = &gcc_usb3_sec_phy_com_aux_clk.clkr, + [GCC_USB3_SEC_PHY_PIPE_CLK] = &gcc_usb3_sec_phy_pipe_clk.clkr, + [GCC_VIDEO_AHB_CLK] = &gcc_video_ahb_clk.clkr, + [GCC_VIDEO_AXI0_CLK] = &gcc_video_axi0_clk.clkr, + [GCC_VIDEO_AXI1_CLK] = &gcc_video_axi1_clk.clkr, + [GCC_VIDEO_AXIC_CLK] = &gcc_video_axic_clk.clkr, + [GCC_VIDEO_XO_CLK] = &gcc_video_xo_clk.clkr, + [GPLL0] = &gpll0.clkr, + [GPLL0_OUT_EVEN] = &gpll0_out_even.clkr, + [GPLL7] = &gpll7.clkr, + [GPLL9] = &gpll9.clkr, +}; + +static const struct qcom_reset_map gcc_sm8150_resets[] = { + [GCC_EMAC_BCR] = { 0x6000 }, + [GCC_GPU_BCR] = { 0x71000 }, + [GCC_MMSS_BCR] = { 0xb000 }, + [GCC_NPU_BCR] = { 0x4d000 }, + [GCC_PCIE_0_BCR] = { 0x6b000 }, + [GCC_PCIE_0_PHY_BCR] = { 0x6c01c }, + [GCC_PCIE_1_BCR] = { 0x8d000 }, + [GCC_PCIE_1_PHY_BCR] = { 0x8e01c }, + [GCC_PCIE_PHY_BCR] = { 0x6f000 }, + [GCC_PDM_BCR] = { 0x33000 }, + [GCC_PRNG_BCR] = { 0x34000 }, + [GCC_QSPI_BCR] = { 0x24008 }, + [GCC_QUPV3_WRAPPER_0_BCR] = { 0x17000 }, + [GCC_QUPV3_WRAPPER_1_BCR] = { 0x18000 }, + [GCC_QUPV3_WRAPPER_2_BCR] = { 0x1e000 }, + [GCC_QUSB2PHY_PRIM_BCR] = { 0x12000 }, + [GCC_QUSB2PHY_SEC_BCR] = { 0x12004 }, + [GCC_USB3_PHY_PRIM_BCR] = { 0x50000 }, + [GCC_USB3_DP_PHY_PRIM_BCR] = { 0x50008 }, + [GCC_USB3_PHY_SEC_BCR] = { 0x5000c }, + [GCC_USB3PHY_PHY_SEC_BCR] = { 0x50010 }, + [GCC_SDCC2_BCR] = { 0x14000 }, + [GCC_SDCC4_BCR] = { 0x16000 }, + [GCC_TSIF_BCR] = { 0x36000 }, + [GCC_UFS_CARD_BCR] = { 0x75000 }, + [GCC_UFS_PHY_BCR] = { 0x77000 }, + [GCC_USB30_PRIM_BCR] = { 0xf000 }, + [GCC_USB30_SEC_BCR] = { 0x10000 }, + [GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x6a000 }, +}; + +static struct gdsc *gcc_sm8150_gdscs[] = { + [EMAC_GDSC] = &emac_gdsc, + [PCIE_0_GDSC] = &pcie_0_gdsc, + [PCIE_1_GDSC] = &pcie_1_gdsc, + [UFS_CARD_GDSC] = &ufs_card_gdsc, + [UFS_PHY_GDSC] = &ufs_phy_gdsc, + [USB30_PRIM_GDSC] = &usb30_prim_gdsc, + [USB30_SEC_GDSC] = &usb30_sec_gdsc, +}; + +static const struct regmap_config gcc_sm8150_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0x9c040, + .fast_io = true, +}; + +static const struct qcom_cc_desc gcc_sm8150_desc = { + .config = &gcc_sm8150_regmap_config, + .clks = gcc_sm8150_clocks, + .num_clks = ARRAY_SIZE(gcc_sm8150_clocks), + .resets = gcc_sm8150_resets, + .num_resets = ARRAY_SIZE(gcc_sm8150_resets), + .gdscs = gcc_sm8150_gdscs, + .num_gdscs = ARRAY_SIZE(gcc_sm8150_gdscs), +}; + +static const struct of_device_id gcc_sm8150_match_table[] = { + { .compatible = "qcom,gcc-sm8150" }, + { } +}; +MODULE_DEVICE_TABLE(of, gcc_sm8150_match_table); + +static int gcc_sm8150_probe(struct platform_device *pdev) +{ + struct regmap *regmap; + + regmap = qcom_cc_map(pdev, &gcc_sm8150_desc); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + /* Disable the GPLL0 active input to NPU and GPU via MISC registers */ + regmap_update_bits(regmap, 0x4d110, 0x3, 0x3); + regmap_update_bits(regmap, 0x71028, 0x3, 0x3); + + return qcom_cc_really_probe(pdev, &gcc_sm8150_desc, regmap); +} + +static struct platform_driver gcc_sm8150_driver = { + .probe = gcc_sm8150_probe, + .driver = { + .name = "gcc-sm8150", + .of_match_table = gcc_sm8150_match_table, + }, +}; + +static int __init gcc_sm8150_init(void) +{ + return platform_driver_register(&gcc_sm8150_driver); +} +subsys_initcall(gcc_sm8150_init); + +static void __exit gcc_sm8150_exit(void) +{ + platform_driver_unregister(&gcc_sm8150_driver); +} +module_exit(gcc_sm8150_exit); + +MODULE_DESCRIPTION("QTI GCC SM8150 Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/rr-cache/7121a4cc53afdc4d2cd9103ae9a02e8b2fa18126/preimage b/rr-cache/7121a4cc53afdc4d2cd9103ae9a02e8b2fa18126/preimage new file mode 100644 index 0000000..41a577b --- /dev/null +++ b/rr-cache/7121a4cc53afdc4d2cd9103ae9a02e8b2fa18126/preimage @@ -0,0 +1,3854 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + +#include <linux/kernel.h> +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/clk-provider.h> +#include <linux/regmap.h> +#include <linux/reset-controller.h> + +#include <dt-bindings/clock/qcom,gcc-sm8150.h> + +#include "common.h" +#include "clk-alpha-pll.h" +#include "clk-branch.h" +#include "clk-pll.h" +#include "clk-rcg.h" +#include "clk-regmap.h" +#include "reset.h" +#include "gdsc.h" + +enum { + P_BI_TCXO, + P_AUD_REF_CLK, + P_CORE_BI_PLL_TEST_SE, + P_GPLL0_OUT_EVEN, + P_GPLL0_OUT_MAIN, + P_GPLL7_OUT_MAIN, + P_GPLL9_OUT_MAIN, + P_SLEEP_CLK, +}; + +static struct clk_alpha_pll gpll0 = { + .offset = 0x0, + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION], + .clkr = { + .enable_reg = 0x52000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gpll0", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "bi_tcxo", + .name = "bi_tcxo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_fixed_trion_ops, + }, + }, +}; + +static const struct clk_div_table post_div_table_trion_even[] = { + { 0x0, 1 }, + { 0x1, 2 }, + { 0x3, 4 }, + { 0x7, 8 }, + { } +}; + +static struct clk_alpha_pll_postdiv gpll0_out_even = { + .offset = 0x0, + .post_div_shift = 8, + .post_div_table = post_div_table_trion_even, + .num_post_div = ARRAY_SIZE(post_div_table_trion_even), + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION], + .width = 4, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gpll0_out_even", + .parent_hws = (const struct clk_hw*[]){ + &gpll0.clkr.hw, + }, + .num_parents = 1, + .ops = &clk_alpha_pll_postdiv_trion_ops, + }, +}; + +static struct clk_alpha_pll gpll7 = { + .offset = 0x1a000, + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION], + .clkr = { + .enable_reg = 0x52000, + .enable_mask = BIT(7), + .hw.init = &(struct clk_init_data){ + .name = "gpll7", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "bi_tcxo", + .name = "bi_tcxo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_fixed_trion_ops, + }, + }, +}; + +static struct clk_alpha_pll gpll9 = { + .offset = 0x1c000, + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION], + .clkr = { + .enable_reg = 0x52000, + .enable_mask = BIT(9), + .hw.init = &(struct clk_init_data){ + .name = "gpll9", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "bi_tcxo", + .name = "bi_tcxo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_fixed_trion_ops, + }, + }, +}; + +static const struct parent_map gcc_parent_map_0[] = { + { P_BI_TCXO, 0 }, + { P_GPLL0_OUT_MAIN, 1 }, + { P_GPLL0_OUT_EVEN, 6 }, + { P_CORE_BI_PLL_TEST_SE, 7 }, +}; + +static const struct clk_parent_data gcc_parents_0[] = { + { .fw_name = "bi_tcxo", .name = "bi_tcxo" }, + { .hw = &gpll0.clkr.hw }, + { .hw = &gpll0_out_even.clkr.hw }, + { .fw_name = "core_bi_pll_test_se" }, +}; + +static const struct parent_map gcc_parent_map_1[] = { + { P_BI_TCXO, 0 }, + { P_GPLL0_OUT_MAIN, 1 }, + { P_SLEEP_CLK, 5 }, + { P_GPLL0_OUT_EVEN, 6 }, + { P_CORE_BI_PLL_TEST_SE, 7 }, +}; + +static const struct clk_parent_data gcc_parents_1[] = { + { .fw_name = "bi_tcxo", .name = "bi_tcxo" }, + { .hw = &gpll0.clkr.hw }, + { .fw_name = "sleep_clk", .name = "sleep_clk" }, + { .hw = &gpll0_out_even.clkr.hw }, + { .fw_name = "core_bi_pll_test_se" }, +}; + +static const struct parent_map gcc_parent_map_2[] = { + { P_BI_TCXO, 0 }, + { P_SLEEP_CLK, 5 }, + { P_CORE_BI_PLL_TEST_SE, 7 }, +}; + +static const struct clk_parent_data gcc_parents_2[] = { + { .fw_name = "bi_tcxo", .name = "bi_tcxo" }, + { .fw_name = "sleep_clk", .name = "sleep_clk" }, + { .fw_name = "core_bi_pll_test_se" }, +}; + +static const struct parent_map gcc_parent_map_3[] = { + { P_BI_TCXO, 0 }, + { P_GPLL0_OUT_MAIN, 1 }, + { P_CORE_BI_PLL_TEST_SE, 7 }, +}; + +static const struct clk_parent_data gcc_parents_3[] = { + { .fw_name = "bi_tcxo", .name = "bi_tcxo" }, + { .hw = &gpll0.clkr.hw }, + { .fw_name = "core_bi_pll_test_se"}, +}; + +static const struct parent_map gcc_parent_map_4[] = { + { P_BI_TCXO, 0 }, + { P_CORE_BI_PLL_TEST_SE, 7 }, +}; + +static const struct clk_parent_data gcc_parents_4[] = { + { .fw_name = "bi_tcxo", .name = "bi_tcxo" }, + { .fw_name = "core_bi_pll_test_se" }, +}; + +static const struct parent_map gcc_parent_map_5[] = { + { P_BI_TCXO, 0 }, + { P_GPLL0_OUT_MAIN, 1 }, + { P_GPLL7_OUT_MAIN, 3 }, + { P_GPLL0_OUT_EVEN, 6 }, + { P_CORE_BI_PLL_TEST_SE, 7 }, +}; + +static const struct clk_parent_data gcc_parents_5[] = { + { .fw_name = "bi_tcxo", .name = "bi_tcxo" }, + { .hw = &gpll0.clkr.hw }, + { .hw = &gpll7.clkr.hw }, + { .hw = &gpll0_out_even.clkr.hw }, + { .fw_name = "core_bi_pll_test_se" }, +}; + +static const struct parent_map gcc_parent_map_6[] = { + { P_BI_TCXO, 0 }, + { P_GPLL0_OUT_MAIN, 1 }, + { P_GPLL9_OUT_MAIN, 2 }, + { P_GPLL0_OUT_EVEN, 6 }, + { P_CORE_BI_PLL_TEST_SE, 7 }, +}; + +static const struct clk_parent_data gcc_parents_6[] = { + { .fw_name = "bi_tcxo", .name = "bi_tcxo" }, + { .hw = &gpll0.clkr.hw }, + { .hw = &gpll9.clkr.hw }, + { .hw = &gpll0_out_even.clkr.hw }, + { .fw_name = "core_bi_pll_test_se" }, +}; + +static const struct parent_map gcc_parent_map_7[] = { + { P_BI_TCXO, 0 }, + { P_GPLL0_OUT_MAIN, 1 }, + { P_AUD_REF_CLK, 2 }, + { P_GPLL0_OUT_EVEN, 6 }, + { P_CORE_BI_PLL_TEST_SE, 7 }, +}; + +static const struct clk_parent_data gcc_parents_7[] = { + { .fw_name = "bi_tcxo", .name = "bi_tcxo" }, + { .hw = &gpll0.clkr.hw }, + { .fw_name = "aud_ref_clk", .name = "aud_ref_clk" }, + { .hw = &gpll0_out_even.clkr.hw }, + { .fw_name = "core_bi_pll_test_se" }, +}; + +static const struct freq_tbl ftbl_gcc_cpuss_ahb_clk_src[] = { + F(19200000, P_BI_TCXO, 1, 0, 0), + F(50000000, P_GPLL0_OUT_MAIN, 12, 0, 0), + F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_cpuss_ahb_clk_src = { + .cmd_rcgr = 0x48014, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_cpuss_ahb_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_cpuss_ahb_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_emac_ptp_clk_src[] = { + F(19200000, P_BI_TCXO, 1, 0, 0), + F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0), + F(125000000, P_GPLL7_OUT_MAIN, 4, 0, 0), + F(250000000, P_GPLL7_OUT_MAIN, 2, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_emac_ptp_clk_src = { + .cmd_rcgr = 0x6038, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_5, + .freq_tbl = ftbl_gcc_emac_ptp_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_emac_ptp_clk_src", + .parent_data = gcc_parents_5, + .num_parents = ARRAY_SIZE(gcc_parents_5), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_emac_rgmii_clk_src[] = { + F(2500000, P_BI_TCXO, 1, 25, 192), + F(5000000, P_BI_TCXO, 1, 25, 96), + F(19200000, P_BI_TCXO, 1, 0, 0), + F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0), + F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0), + F(125000000, P_GPLL7_OUT_MAIN, 4, 0, 0), + F(250000000, P_GPLL7_OUT_MAIN, 2, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_emac_rgmii_clk_src = { + .cmd_rcgr = 0x601c, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_parent_map_5, + .freq_tbl = ftbl_gcc_emac_rgmii_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_emac_rgmii_clk_src", + .parent_data = gcc_parents_5, + .num_parents = ARRAY_SIZE(gcc_parents_5), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_gp1_clk_src[] = { + F(19200000, P_BI_TCXO, 1, 0, 0), + F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0), + F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0), + F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0), + F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_gp1_clk_src = { + .cmd_rcgr = 0x64004, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_parent_map_1, + .freq_tbl = ftbl_gcc_gp1_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_gp1_clk_src", + .parent_data = gcc_parents_1, + .num_parents = ARRAY_SIZE(gcc_parents_1), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_gp2_clk_src = { + .cmd_rcgr = 0x65004, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_parent_map_1, + .freq_tbl = ftbl_gcc_gp1_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_gp2_clk_src", + .parent_data = gcc_parents_1, + .num_parents = ARRAY_SIZE(gcc_parents_1), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_gp3_clk_src = { + .cmd_rcgr = 0x66004, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_parent_map_1, + .freq_tbl = ftbl_gcc_gp1_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_gp3_clk_src", + .parent_data = gcc_parents_1, + .num_parents = ARRAY_SIZE(gcc_parents_1), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_pcie_0_aux_clk_src[] = { + F(9600000, P_BI_TCXO, 2, 0, 0), + F(19200000, P_BI_TCXO, 1, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_pcie_0_aux_clk_src = { + .cmd_rcgr = 0x6b02c, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_2, + .freq_tbl = ftbl_gcc_pcie_0_aux_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_0_aux_clk_src", + .parent_data = gcc_parents_2, + .num_parents = ARRAY_SIZE(gcc_parents_2), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_pcie_1_aux_clk_src = { + .cmd_rcgr = 0x8d02c, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_2, + .freq_tbl = ftbl_gcc_pcie_0_aux_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_1_aux_clk_src", + .parent_data = gcc_parents_2, + .num_parents = ARRAY_SIZE(gcc_parents_2), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_pcie_phy_refgen_clk_src[] = { + F(19200000, P_BI_TCXO, 1, 0, 0), + F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_pcie_phy_refgen_clk_src = { + .cmd_rcgr = 0x6f014, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_pcie_phy_refgen_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_phy_refgen_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_pdm2_clk_src[] = { + F(9600000, P_BI_TCXO, 2, 0, 0), + F(19200000, P_BI_TCXO, 1, 0, 0), + F(60000000, P_GPLL0_OUT_MAIN, 10, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_pdm2_clk_src = { + .cmd_rcgr = 0x33010, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_pdm2_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_pdm2_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_qspi_core_clk_src[] = { + F(19200000, P_BI_TCXO, 1, 0, 0), + F(75000000, P_GPLL0_OUT_EVEN, 4, 0, 0), + F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0), + F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_qspi_core_clk_src = { + .cmd_rcgr = 0x4b008, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qspi_core_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qspi_core_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s0_clk_src[] = { + F(7372800, P_GPLL0_OUT_EVEN, 1, 384, 15625), + F(14745600, P_GPLL0_OUT_EVEN, 1, 768, 15625), + F(19200000, P_BI_TCXO, 1, 0, 0), + F(29491200, P_GPLL0_OUT_EVEN, 1, 1536, 15625), + F(32000000, P_GPLL0_OUT_EVEN, 1, 8, 75), + F(48000000, P_GPLL0_OUT_EVEN, 1, 4, 25), + F(64000000, P_GPLL0_OUT_EVEN, 1, 16, 75), + F(80000000, P_GPLL0_OUT_EVEN, 1, 4, 15), + F(96000000, P_GPLL0_OUT_EVEN, 1, 8, 25), + F(100000000, P_GPLL0_OUT_EVEN, 3, 0, 0), + F(102400000, P_GPLL0_OUT_EVEN, 1, 128, 375), + F(112000000, P_GPLL0_OUT_EVEN, 1, 28, 75), + F(117964800, P_GPLL0_OUT_EVEN, 1, 6144, 15625), + F(120000000, P_GPLL0_OUT_EVEN, 2.5, 0, 0), + F(128000000, P_GPLL0_OUT_MAIN, 1, 16, 75), + { } +}; + +static struct clk_rcg2 gcc_qupv3_wrap0_s0_clk_src = { + .cmd_rcgr = 0x17148, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s0_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap0_s1_clk_src = { + .cmd_rcgr = 0x17278, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s1_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap0_s2_clk_src = { + .cmd_rcgr = 0x173a8, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s2_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap0_s3_clk_src = { + .cmd_rcgr = 0x174d8, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s3_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap0_s4_clk_src = { + .cmd_rcgr = 0x17608, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s4_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap0_s5_clk_src = { + .cmd_rcgr = 0x17738, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s5_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap0_s6_clk_src = { + .cmd_rcgr = 0x17868, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s6_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap0_s7_clk_src = { + .cmd_rcgr = 0x17998, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s7_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap1_s0_clk_src = { + .cmd_rcgr = 0x18148, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s0_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap1_s1_clk_src = { + .cmd_rcgr = 0x18278, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s1_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap1_s2_clk_src = { + .cmd_rcgr = 0x183a8, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s2_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap1_s3_clk_src = { + .cmd_rcgr = 0x184d8, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s3_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap1_s4_clk_src = { + .cmd_rcgr = 0x18608, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s4_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap1_s5_clk_src = { + .cmd_rcgr = 0x18738, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s5_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap2_s0_clk_src = { + .cmd_rcgr = 0x1e148, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s0_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap2_s1_clk_src = { + .cmd_rcgr = 0x1e278, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s1_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap2_s2_clk_src = { + .cmd_rcgr = 0x1e3a8, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s2_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap2_s3_clk_src = { + .cmd_rcgr = 0x1e4d8, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s3_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap2_s4_clk_src = { + .cmd_rcgr = 0x1e608, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s4_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_qupv3_wrap2_s5_clk_src = { + .cmd_rcgr = 0x1e738, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s5_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_sdcc2_apps_clk_src[] = { + F(400000, P_BI_TCXO, 12, 1, 4), + F(9600000, P_BI_TCXO, 2, 0, 0), + F(19200000, P_BI_TCXO, 1, 0, 0), + F(25000000, P_GPLL0_OUT_MAIN, 12, 1, 2), + F(50000000, P_GPLL0_OUT_MAIN, 12, 0, 0), + F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0), + F(202000000, P_GPLL9_OUT_MAIN, 4, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_sdcc2_apps_clk_src = { + .cmd_rcgr = 0x1400c, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_parent_map_6, + .freq_tbl = ftbl_gcc_sdcc2_apps_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc2_apps_clk_src", + .parent_data = gcc_parents_6, + .num_parents = ARRAY_SIZE(gcc_parents_6), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_floor_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_sdcc4_apps_clk_src[] = { + F(400000, P_BI_TCXO, 12, 1, 4), + F(9600000, P_BI_TCXO, 2, 0, 0), + F(19200000, P_BI_TCXO, 1, 0, 0), + F(25000000, P_GPLL0_OUT_MAIN, 12, 1, 2), + F(50000000, P_GPLL0_OUT_MAIN, 12, 0, 0), + F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_sdcc4_apps_clk_src = { + .cmd_rcgr = 0x1600c, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_parent_map_3, + .freq_tbl = ftbl_gcc_sdcc4_apps_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc4_apps_clk_src", + .parent_data = gcc_parents_3, + .num_parents = ARRAY_SIZE(gcc_parents_3), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_floor_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_tsif_ref_clk_src[] = { + F(105495, P_BI_TCXO, 2, 1, 91), + { } +}; + +static struct clk_rcg2 gcc_tsif_ref_clk_src = { + .cmd_rcgr = 0x36010, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_parent_map_7, + .freq_tbl = ftbl_gcc_tsif_ref_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_tsif_ref_clk_src", + .parent_data = gcc_parents_7, + .num_parents = ARRAY_SIZE(gcc_parents_7), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_ufs_card_axi_clk_src[] = { + F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0), + F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0), + F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0), + F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0), + F(240000000, P_GPLL0_OUT_MAIN, 2.5, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_ufs_card_axi_clk_src = { + .cmd_rcgr = 0x75020, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_ufs_card_axi_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_axi_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_ufs_card_ice_core_clk_src[] = { + F(37500000, P_GPLL0_OUT_EVEN, 8, 0, 0), + F(75000000, P_GPLL0_OUT_EVEN, 4, 0, 0), + F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0), + F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_ufs_card_ice_core_clk_src = { + .cmd_rcgr = 0x75060, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_ufs_card_ice_core_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_ice_core_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_ufs_card_phy_aux_clk_src[] = { + F(19200000, P_BI_TCXO, 1, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_ufs_card_phy_aux_clk_src = { + .cmd_rcgr = 0x75094, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_4, + .freq_tbl = ftbl_gcc_ufs_card_phy_aux_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_phy_aux_clk_src", + .parent_data = gcc_parents_4, + .num_parents = ARRAY_SIZE(gcc_parents_4), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_ufs_card_unipro_core_clk_src[] = { + F(37500000, P_GPLL0_OUT_EVEN, 8, 0, 0), + F(75000000, P_GPLL0_OUT_MAIN, 8, 0, 0), + F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_ufs_card_unipro_core_clk_src = { + .cmd_rcgr = 0x75078, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_ufs_card_unipro_core_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_unipro_core_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_ufs_phy_axi_clk_src[] = { + F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0), + F(37500000, P_GPLL0_OUT_EVEN, 8, 0, 0), + F(75000000, P_GPLL0_OUT_EVEN, 4, 0, 0), + F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0), + F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_ufs_phy_axi_clk_src = { + .cmd_rcgr = 0x77020, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_ufs_phy_axi_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_axi_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_ufs_phy_ice_core_clk_src = { + .cmd_rcgr = 0x77060, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_ufs_card_ice_core_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_ice_core_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_ufs_phy_phy_aux_clk_src = { + .cmd_rcgr = 0x77094, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_4, + .freq_tbl = ftbl_gcc_pcie_0_aux_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_phy_aux_clk_src", + .parent_data = gcc_parents_4, + .num_parents = ARRAY_SIZE(gcc_parents_4), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_ufs_phy_unipro_core_clk_src = { + .cmd_rcgr = 0x77078, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_ufs_card_ice_core_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_unipro_core_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_usb30_prim_master_clk_src[] = { + F(33333333, P_GPLL0_OUT_EVEN, 9, 0, 0), + F(66666667, P_GPLL0_OUT_EVEN, 4.5, 0, 0), + F(133333333, P_GPLL0_OUT_MAIN, 4.5, 0, 0), + F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0), + F(240000000, P_GPLL0_OUT_MAIN, 2.5, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_usb30_prim_master_clk_src = { + .cmd_rcgr = 0xf01c, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_usb30_prim_master_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_usb30_prim_master_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_usb30_prim_mock_utmi_clk_src[] = { + F(19200000, P_BI_TCXO, 1, 0, 0), + F(20000000, P_GPLL0_OUT_EVEN, 15, 0, 0), + F(60000000, P_GPLL0_OUT_EVEN, 5, 0, 0), + { } +}; + +static struct clk_rcg2 gcc_usb30_prim_mock_utmi_clk_src = { + .cmd_rcgr = 0xf034, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_usb30_prim_mock_utmi_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_usb30_prim_mock_utmi_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_usb30_sec_master_clk_src = { + .cmd_rcgr = 0x1001c, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_usb30_prim_master_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_usb30_sec_master_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_usb30_sec_mock_utmi_clk_src = { + .cmd_rcgr = 0x10034, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_0, + .freq_tbl = ftbl_gcc_usb30_prim_mock_utmi_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_usb30_sec_mock_utmi_clk_src", + .parent_data = gcc_parents_0, + .num_parents = ARRAY_SIZE(gcc_parents_0), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_usb3_prim_phy_aux_clk_src = { + .cmd_rcgr = 0xf060, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_2, + .freq_tbl = ftbl_gcc_ufs_card_phy_aux_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_prim_phy_aux_clk_src", + .parent_data = gcc_parents_2, + .num_parents = ARRAY_SIZE(gcc_parents_2), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gcc_usb3_sec_phy_aux_clk_src = { + .cmd_rcgr = 0x10060, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_2, + .freq_tbl = ftbl_gcc_ufs_card_phy_aux_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_sec_phy_aux_clk_src", + .parent_data = gcc_parents_2, + .num_parents = ARRAY_SIZE(gcc_parents_2), + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_aggre_noc_pcie_tbu_clk = { + .halt_reg = 0x90018, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x90018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_aggre_noc_pcie_tbu_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_aggre_ufs_card_axi_clk = { + .halt_reg = 0x750c0, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x750c0, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x750c0, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_aggre_ufs_card_axi_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_card_axi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_aggre_ufs_card_axi_hw_ctl_clk = { + .halt_reg = 0x750c0, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x750c0, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x750c0, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_aggre_ufs_card_axi_hw_ctl_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_aggre_ufs_card_axi_clk.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch_simple_ops, + }, + }, +}; + +static struct clk_branch gcc_aggre_ufs_phy_axi_clk = { + .halt_reg = 0x770c0, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x770c0, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x770c0, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_aggre_ufs_phy_axi_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_phy_axi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_aggre_ufs_phy_axi_hw_ctl_clk = { + .halt_reg = 0x770c0, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x770c0, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x770c0, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_aggre_ufs_phy_axi_hw_ctl_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_aggre_ufs_phy_axi_clk.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch_simple_ops, + }, + }, +}; + +static struct clk_branch gcc_aggre_usb3_prim_axi_clk = { + .halt_reg = 0xf07c, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xf07c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_aggre_usb3_prim_axi_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb30_prim_master_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_aggre_usb3_sec_axi_clk = { + .halt_reg = 0x1007c, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x1007c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_aggre_usb3_sec_axi_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb30_sec_master_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_boot_rom_ahb_clk = { + .halt_reg = 0x38004, + .halt_check = BRANCH_HALT_VOTED, + .hwcg_reg = 0x38004, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(10), + .hw.init = &(struct clk_init_data){ + .name = "gcc_boot_rom_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* + * Clock ON depends on external parent 'config noc', so cant poll + * delay and also mark as crtitical for camss boot + */ +static struct clk_branch gcc_camera_ahb_clk = { + .halt_reg = 0xb008, + .halt_check = BRANCH_HALT_DELAY, + .hwcg_reg = 0xb008, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0xb008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camera_ahb_clk", + .flags = CLK_IS_CRITICAL, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camera_hf_axi_clk = { + .halt_reg = 0xb030, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xb030, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camera_hf_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camera_sf_axi_clk = { + .halt_reg = 0xb034, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xb034, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camera_sf_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* XO critical input to camss, so no need to poll */ +static struct clk_branch gcc_camera_xo_clk = { + .halt_reg = 0xb044, + .halt_check = BRANCH_HALT_DELAY, + .clkr = { + .enable_reg = 0xb044, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camera_xo_clk", + .flags = CLK_IS_CRITICAL, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_cfg_noc_usb3_prim_axi_clk = { + .halt_reg = 0xf078, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xf078, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_cfg_noc_usb3_prim_axi_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb30_prim_master_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_cfg_noc_usb3_sec_axi_clk = { + .halt_reg = 0x10078, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x10078, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_cfg_noc_usb3_sec_axi_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb30_sec_master_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_cpuss_ahb_clk = { + .halt_reg = 0x48000, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(21), + .hw.init = &(struct clk_init_data){ + .name = "gcc_cpuss_ahb_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_cpuss_ahb_clk_src.clkr.hw }, + .num_parents = 1, + /* required for cpuss */ + .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_cpuss_dvm_bus_clk = { + .halt_reg = 0x48190, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x48190, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_cpuss_dvm_bus_clk", + /* required for cpuss */ + .flags = CLK_IS_CRITICAL, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_cpuss_gnoc_clk = { + .halt_reg = 0x48004, + .halt_check = BRANCH_HALT_VOTED, + .hwcg_reg = 0x48004, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(22), + .hw.init = &(struct clk_init_data){ + .name = "gcc_cpuss_gnoc_clk", + /* required for cpuss */ + .flags = CLK_IS_CRITICAL, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_cpuss_rbcpr_clk = { + .halt_reg = 0x48008, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x48008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_cpuss_rbcpr_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ddrss_gpu_axi_clk = { + .halt_reg = 0x71154, + .halt_check = BRANCH_VOTED, + .clkr = { + .enable_reg = 0x71154, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ddrss_gpu_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* + * Clock ON depends on external parent 'config noc', so cant poll + * delay and also mark as crtitical for disp boot + */ +static struct clk_branch gcc_disp_ahb_clk = { + .halt_reg = 0xb00c, + .halt_check = BRANCH_HALT_DELAY, + .hwcg_reg = 0xb00c, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0xb00c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_disp_ahb_clk", + .flags = CLK_IS_CRITICAL, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_disp_hf_axi_clk = { + .halt_reg = 0xb038, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xb038, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_disp_hf_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_disp_sf_axi_clk = { + .halt_reg = 0xb03c, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xb03c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_disp_sf_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* XO critical input to disp, so no need to poll */ +static struct clk_branch gcc_disp_xo_clk = { + .halt_reg = 0xb048, + .halt_check = BRANCH_HALT_DELAY, + .clkr = { + .enable_reg = 0xb048, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_disp_xo_clk", + .flags = CLK_IS_CRITICAL, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_emac_axi_clk = { + .halt_reg = 0x6010, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x6010, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_emac_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_emac_ptp_clk = { + .halt_reg = 0x6034, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x6034, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_emac_ptp_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_emac_ptp_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_emac_rgmii_clk = { + .halt_reg = 0x6018, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x6018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_emac_rgmii_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_emac_rgmii_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_emac_slv_ahb_clk = { + .halt_reg = 0x6014, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x6014, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x6014, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_emac_slv_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gp1_clk = { + .halt_reg = 0x64000, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x64000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gp1_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_gp1_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gp2_clk = { + .halt_reg = 0x65000, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x65000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gp2_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_gp2_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gp3_clk = { + .halt_reg = 0x66000, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x66000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gp3_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_gp3_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gpu_cfg_ahb_clk = { + .halt_reg = 0x71004, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x71004, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x71004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gpu_cfg_ahb_clk", + /* required for gpu */ + .flags = CLK_IS_CRITICAL, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gpu_gpll0_clk_src = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(15), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gpu_gpll0_clk_src", + .parent_hws = (const struct clk_hw *[]){ + &gpll0.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gpu_gpll0_div_clk_src = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(16), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gpu_gpll0_div_clk_src", + .parent_hws = (const struct clk_hw *[]){ + &gpll0_out_even.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gpu_iref_clk = { + .halt_reg = 0x8c010, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x8c010, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gpu_iref_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gpu_memnoc_gfx_clk = { + .halt_reg = 0x7100c, + .halt_check = BRANCH_VOTED, + .clkr = { + .enable_reg = 0x7100c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gpu_memnoc_gfx_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gpu_snoc_dvm_gfx_clk = { + .halt_reg = 0x71018, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x71018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gpu_snoc_dvm_gfx_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_npu_at_clk = { + .halt_reg = 0x4d010, + .halt_check = BRANCH_VOTED, + .clkr = { + .enable_reg = 0x4d010, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_npu_at_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_npu_axi_clk = { + .halt_reg = 0x4d008, + .halt_check = BRANCH_VOTED, + .clkr = { + .enable_reg = 0x4d008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_npu_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_npu_cfg_ahb_clk = { + .halt_reg = 0x4d004, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x4d004, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x4d004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_npu_cfg_ahb_clk", + /* required for npu */ + .flags = CLK_IS_CRITICAL, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_npu_gpll0_clk_src = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(18), + .hw.init = &(struct clk_init_data){ + .name = "gcc_npu_gpll0_clk_src", + .parent_hws = (const struct clk_hw *[]){ + &gpll0.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_npu_gpll0_div_clk_src = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(19), + .hw.init = &(struct clk_init_data){ + .name = "gcc_npu_gpll0_div_clk_src", + .parent_hws = (const struct clk_hw *[]){ + &gpll0_out_even.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_npu_trig_clk = { + .halt_reg = 0x4d00c, + .halt_check = BRANCH_VOTED, + .clkr = { + .enable_reg = 0x4d00c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_npu_trig_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie0_phy_refgen_clk = { + .halt_reg = 0x6f02c, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x6f02c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie0_phy_refgen_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_pcie_phy_refgen_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie1_phy_refgen_clk = { + .halt_reg = 0x6f030, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x6f030, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie1_phy_refgen_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_pcie_phy_refgen_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_0_aux_clk = { + .halt_reg = 0x6b020, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(3), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_0_aux_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_pcie_0_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_0_cfg_ahb_clk = { + .halt_reg = 0x6b01c, + .halt_check = BRANCH_HALT_VOTED, + .hwcg_reg = 0x6b01c, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(2), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_0_cfg_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_0_clkref_clk = { + .halt_reg = 0x8c00c, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x8c00c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_0_clkref_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_0_mstr_axi_clk = { + .halt_reg = 0x6b018, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_0_mstr_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* Clock ON depends on external parent 'PIPE' clock, so dont poll */ +static struct clk_branch gcc_pcie_0_pipe_clk = { + .halt_reg = 0x6b024, + .halt_check = BRANCH_HALT_DELAY, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(4), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_0_pipe_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_0_slv_axi_clk = { + .halt_reg = 0x6b014, + .halt_check = BRANCH_HALT_VOTED, + .hwcg_reg = 0x6b014, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_0_slv_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_0_slv_q2a_axi_clk = { + .halt_reg = 0x6b010, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(5), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_0_slv_q2a_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_1_aux_clk = { + .halt_reg = 0x8d020, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(29), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_1_aux_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_pcie_1_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_1_cfg_ahb_clk = { + .halt_reg = 0x8d01c, + .halt_check = BRANCH_HALT_VOTED, + .hwcg_reg = 0x8d01c, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(28), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_1_cfg_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_1_clkref_clk = { + .halt_reg = 0x8c02c, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x8c02c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_1_clkref_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_1_mstr_axi_clk = { + .halt_reg = 0x8d018, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(27), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_1_mstr_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* Clock ON depends on external parent 'PIPE' clock, so dont poll */ +static struct clk_branch gcc_pcie_1_pipe_clk = { + .halt_reg = 0x8d024, + .halt_check = BRANCH_HALT_DELAY, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(30), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_1_pipe_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_1_slv_axi_clk = { + .halt_reg = 0x8d014, + .halt_check = BRANCH_HALT_VOTED, + .hwcg_reg = 0x8d014, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(26), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_1_slv_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_1_slv_q2a_axi_clk = { + .halt_reg = 0x8d010, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(25), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_1_slv_q2a_axi_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_phy_aux_clk = { + .halt_reg = 0x6f004, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x6f004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_phy_aux_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_pcie_0_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pdm2_clk = { + .halt_reg = 0x3300c, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x3300c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pdm2_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_pdm2_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pdm_ahb_clk = { + .halt_reg = 0x33004, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x33004, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x33004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pdm_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pdm_xo4_clk = { + .halt_reg = 0x33008, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x33008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pdm_xo4_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_prng_ahb_clk = { + .halt_reg = 0x34004, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(13), + .hw.init = &(struct clk_init_data){ + .name = "gcc_prng_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qmip_camera_nrt_ahb_clk = { + .halt_reg = 0xb018, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0xb018, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0xb018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qmip_camera_nrt_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qmip_camera_rt_ahb_clk = { + .halt_reg = 0xb01c, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0xb01c, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0xb01c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qmip_camera_rt_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qmip_disp_ahb_clk = { + .halt_reg = 0xb020, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0xb020, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0xb020, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qmip_disp_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qmip_video_cvp_ahb_clk = { + .halt_reg = 0xb010, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0xb010, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0xb010, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qmip_video_cvp_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qmip_video_vcodec_ahb_clk = { + .halt_reg = 0xb014, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0xb014, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0xb014, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qmip_video_vcodec_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qspi_cnoc_periph_ahb_clk = { + .halt_reg = 0x4b000, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x4b000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qspi_cnoc_periph_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qspi_core_clk = { + .halt_reg = 0x4b004, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x4b004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qspi_core_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qspi_core_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap0_s0_clk = { + .halt_reg = 0x17144, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(10), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s0_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap0_s0_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap0_s1_clk = { + .halt_reg = 0x17274, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(11), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s1_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap0_s1_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap0_s2_clk = { + .halt_reg = 0x173a4, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(12), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s2_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap0_s2_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap0_s3_clk = { + .halt_reg = 0x174d4, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(13), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s3_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap0_s3_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap0_s4_clk = { + .halt_reg = 0x17604, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(14), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s4_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap0_s4_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap0_s5_clk = { + .halt_reg = 0x17734, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(15), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s5_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap0_s5_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap0_s6_clk = { + .halt_reg = 0x17864, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(16), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s6_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap0_s6_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap0_s7_clk = { + .halt_reg = 0x17994, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(17), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap0_s7_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap0_s7_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap1_s0_clk = { + .halt_reg = 0x18144, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(22), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s0_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap1_s0_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap1_s1_clk = { + .halt_reg = 0x18274, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(23), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s1_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap1_s1_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap1_s2_clk = { + .halt_reg = 0x183a4, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(24), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s2_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap1_s2_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap1_s3_clk = { + .halt_reg = 0x184d4, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(25), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s3_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap1_s3_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap1_s4_clk = { + .halt_reg = 0x18604, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(26), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s4_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap1_s4_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap1_s5_clk = { + .halt_reg = 0x18734, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(27), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap1_s5_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap1_s5_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap2_s0_clk = { + .halt_reg = 0x1e144, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52014, + .enable_mask = BIT(4), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s0_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap2_s0_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap2_s1_clk = { + .halt_reg = 0x1e274, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52014, + .enable_mask = BIT(5), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s1_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap2_s1_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap2_s2_clk = { + .halt_reg = 0x1e3a4, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52014, + .enable_mask = BIT(6), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s2_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap2_s2_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap2_s3_clk = { + .halt_reg = 0x1e4d4, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52014, + .enable_mask = BIT(7), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s3_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap2_s3_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap2_s4_clk = { + .halt_reg = 0x1e604, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52014, + .enable_mask = BIT(8), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s4_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap2_s4_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap2_s5_clk = { + .halt_reg = 0x1e734, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52014, + .enable_mask = BIT(9), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap2_s5_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_qupv3_wrap2_s5_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap_0_m_ahb_clk = { + .halt_reg = 0x17004, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(6), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap_0_m_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap_0_s_ahb_clk = { + .halt_reg = 0x17008, + .halt_check = BRANCH_HALT_VOTED, + .hwcg_reg = 0x17008, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(7), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap_0_s_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap_1_m_ahb_clk = { + .halt_reg = 0x18004, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(20), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap_1_m_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap_1_s_ahb_clk = { + .halt_reg = 0x18008, + .halt_check = BRANCH_HALT_VOTED, + .hwcg_reg = 0x18008, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x5200c, + .enable_mask = BIT(21), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap_1_s_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap_2_m_ahb_clk = { + .halt_reg = 0x1e004, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52014, + .enable_mask = BIT(2), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap_2_m_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qupv3_wrap_2_s_ahb_clk = { + .halt_reg = 0x1e008, + .halt_check = BRANCH_HALT_VOTED, + .hwcg_reg = 0x1e008, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x52014, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qupv3_wrap_2_s_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sdcc2_ahb_clk = { + .halt_reg = 0x14008, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x14008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc2_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sdcc2_apps_clk = { + .halt_reg = 0x14004, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x14004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc2_apps_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_sdcc2_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sdcc4_ahb_clk = { + .halt_reg = 0x16008, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x16008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc4_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sdcc4_apps_clk = { + .halt_reg = 0x16004, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x16004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc4_apps_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_sdcc4_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sys_noc_cpuss_ahb_clk = { + .halt_reg = 0x4819c, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x52004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sys_noc_cpuss_ahb_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_cpuss_ahb_clk_src.clkr.hw }, + .num_parents = 1, + /* required for cpuss */ + .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_tsif_ahb_clk = { + .halt_reg = 0x36004, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x36004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_tsif_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_tsif_inactivity_timers_clk = { + .halt_reg = 0x3600c, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x3600c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_tsif_inactivity_timers_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_tsif_ref_clk = { + .halt_reg = 0x36008, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x36008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_tsif_ref_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_tsif_ref_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_card_ahb_clk = { + .halt_reg = 0x75014, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x75014, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x75014, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_card_axi_clk = { + .halt_reg = 0x75010, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x75010, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x75010, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_axi_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_card_axi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_card_axi_hw_ctl_clk = { + .halt_reg = 0x75010, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x75010, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x75010, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_axi_hw_ctl_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_card_axi_clk.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch_simple_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_card_clkref_clk = { + .halt_reg = 0x8c004, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x8c004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_clkref_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_card_ice_core_clk = { + .halt_reg = 0x7505c, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x7505c, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x7505c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_ice_core_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_card_ice_core_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_card_ice_core_hw_ctl_clk = { + .halt_reg = 0x7505c, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x7505c, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x7505c, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_ice_core_hw_ctl_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_card_ice_core_clk.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch_simple_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_card_phy_aux_clk = { + .halt_reg = 0x75090, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x75090, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x75090, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_phy_aux_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_card_phy_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_card_phy_aux_hw_ctl_clk = { + .halt_reg = 0x75090, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x75090, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x75090, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_phy_aux_hw_ctl_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_card_phy_aux_clk.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch_simple_ops, + }, + }, +}; + +/* external clocks so add BRANCH_HALT_SKIP */ +static struct clk_branch gcc_ufs_card_rx_symbol_0_clk = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x7501c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_rx_symbol_0_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* external clocks so add BRANCH_HALT_SKIP */ +static struct clk_branch gcc_ufs_card_rx_symbol_1_clk = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x750ac, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_rx_symbol_1_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* external clocks so add BRANCH_HALT_SKIP */ +static struct clk_branch gcc_ufs_card_tx_symbol_0_clk = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x75018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_tx_symbol_0_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_card_unipro_core_clk = { + .halt_reg = 0x75058, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x75058, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x75058, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_unipro_core_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_card_unipro_core_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_card_unipro_core_hw_ctl_clk = { + .halt_reg = 0x75058, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x75058, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x75058, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_card_unipro_core_hw_ctl_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_card_unipro_core_clk.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch_simple_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_mem_clkref_clk = { + .halt_reg = 0x8c000, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x8c000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_mem_clkref_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_phy_ahb_clk = { + .halt_reg = 0x77014, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x77014, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x77014, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_ahb_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_phy_axi_clk = { + .halt_reg = 0x77010, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x77010, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x77010, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_axi_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_phy_axi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_phy_axi_hw_ctl_clk = { + .halt_reg = 0x77010, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x77010, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x77010, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_axi_hw_ctl_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_phy_axi_clk.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch_simple_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_phy_ice_core_clk = { + .halt_reg = 0x7705c, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x7705c, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x7705c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_ice_core_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_phy_ice_core_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_phy_ice_core_hw_ctl_clk = { + .halt_reg = 0x7705c, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x7705c, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x7705c, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_ice_core_hw_ctl_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_phy_ice_core_clk.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch_simple_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_phy_phy_aux_clk = { + .halt_reg = 0x77090, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x77090, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x77090, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_phy_aux_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_phy_phy_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_phy_phy_aux_hw_ctl_clk = { + .halt_reg = 0x77090, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x77090, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x77090, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_phy_aux_hw_ctl_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_phy_phy_aux_clk.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch_simple_ops, + }, + }, +}; + +/* external clocks so add BRANCH_HALT_SKIP */ +static struct clk_branch gcc_ufs_phy_rx_symbol_0_clk = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x7701c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_rx_symbol_0_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* external clocks so add BRANCH_HALT_SKIP */ +static struct clk_branch gcc_ufs_phy_rx_symbol_1_clk = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x770ac, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_rx_symbol_1_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* external clocks so add BRANCH_HALT_SKIP */ +static struct clk_branch gcc_ufs_phy_tx_symbol_0_clk = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x77018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_tx_symbol_0_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_phy_unipro_core_clk = { + .halt_reg = 0x77058, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x77058, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x77058, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_unipro_core_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_phy_unipro_core_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_phy_unipro_core_hw_ctl_clk = { + .halt_reg = 0x77058, + .halt_check = BRANCH_HALT, + .hwcg_reg = 0x77058, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0x77058, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_phy_unipro_core_hw_ctl_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_ufs_phy_unipro_core_clk.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch_simple_ops, + }, + }, +}; + +static struct clk_branch gcc_usb30_prim_master_clk = { + .halt_reg = 0xf010, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xf010, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb30_prim_master_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb30_prim_master_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb30_prim_mock_utmi_clk = { + .halt_reg = 0xf018, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xf018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb30_prim_mock_utmi_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb30_prim_mock_utmi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb30_prim_sleep_clk = { + .halt_reg = 0xf014, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xf014, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb30_prim_sleep_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb30_sec_master_clk = { + .halt_reg = 0x10010, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x10010, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb30_sec_master_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb30_sec_master_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb30_sec_mock_utmi_clk = { + .halt_reg = 0x10018, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x10018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb30_sec_mock_utmi_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb30_sec_mock_utmi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb30_sec_sleep_clk = { + .halt_reg = 0x10014, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x10014, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb30_sec_sleep_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb3_prim_clkref_clk = { + .halt_reg = 0x8c008, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x8c008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_prim_clkref_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb3_prim_phy_aux_clk = { + .halt_reg = 0xf050, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xf050, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_prim_phy_aux_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb3_prim_phy_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb3_prim_phy_com_aux_clk = { + .halt_reg = 0xf054, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xf054, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_prim_phy_com_aux_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb3_prim_phy_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb3_prim_phy_pipe_clk = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0xf058, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_prim_phy_pipe_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb3_sec_clkref_clk = { + .halt_reg = 0x8c028, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x8c028, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_sec_clkref_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb3_sec_phy_aux_clk = { + .halt_reg = 0x10050, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x10050, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_sec_phy_aux_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb3_sec_phy_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb3_sec_phy_com_aux_clk = { + .halt_reg = 0x10054, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0x10054, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_sec_phy_com_aux_clk", + .parent_hws = (const struct clk_hw *[]){ + &gcc_usb3_sec_phy_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb3_sec_phy_pipe_clk = { + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x10058, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_sec_phy_pipe_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* + * Clock ON depends on external parent 'config noc', so cant poll + * delay and also mark as crtitical for video boot + */ +static struct clk_branch gcc_video_ahb_clk = { + .halt_reg = 0xb004, + .halt_check = BRANCH_HALT_DELAY, + .hwcg_reg = 0xb004, + .hwcg_bit = 1, + .clkr = { + .enable_reg = 0xb004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_video_ahb_clk", + .flags = CLK_IS_CRITICAL, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_video_axi0_clk = { + .halt_reg = 0xb024, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xb024, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_video_axi0_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_video_axi1_clk = { + .halt_reg = 0xb028, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xb028, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_video_axi1_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_video_axic_clk = { + .halt_reg = 0xb02c, + .halt_check = BRANCH_HALT, + .clkr = { + .enable_reg = 0xb02c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_video_axic_clk", + .ops = &clk_branch2_ops, + }, + }, +}; + +/* XO critical input to video, so no need to poll */ +static struct clk_branch gcc_video_xo_clk = { + .halt_reg = 0xb040, + .halt_check = BRANCH_HALT_DELAY, + .clkr = { + .enable_reg = 0xb040, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_video_xo_clk", + .flags = CLK_IS_CRITICAL, + .ops = &clk_branch2_ops, + }, + }, +}; + +<<<<<<< +static struct gdsc emac_gdsc = { + .gdscr = 0x6004, + .pd = { + .name = "emac_gdsc", + }, + .pwrsts = PWRSTS_OFF_ON, + /* + * FIXME: emac GDSC cannot resume after GDSC power off: + * qcom-ethqos 20000.ethernet: Failed to reset the dma + * + * So use ALWAYS_ON flag as a workaround. + */ + .flags = ALWAYS_ON, +======= +static struct gdsc pcie_0_gdsc = { + .gdscr = 0x6b004, + .pd = { + .name = "pcie_0_gdsc", + }, + .pwrsts = PWRSTS_OFF_ON, + .flags = POLL_CFG_GDSCR, +}; + +static struct gdsc pcie_1_gdsc = { + .gdscr = 0x8d004, + .pd = { + .name = "pcie_1_gdsc", + }, + .pwrsts = PWRSTS_OFF_ON, + .flags = POLL_CFG_GDSCR, +>>>>>>> +}; + +static struct gdsc ufs_card_gdsc = { + .gdscr = 0x75004, + .pd = { + .name = "ufs_card_gdsc", + }, + .pwrsts = PWRSTS_OFF_ON, + .flags = POLL_CFG_GDSCR, +}; + +static struct gdsc ufs_phy_gdsc = { + .gdscr = 0x77004, + .pd = { + .name = "ufs_phy_gdsc", + }, + .pwrsts = PWRSTS_OFF_ON, + .flags = POLL_CFG_GDSCR, +}; + +<<<<<<< +======= +static struct gdsc emac_gdsc = { + .gdscr = 0x6004, + .pd = { + .name = "emac_gdsc", + }, + .pwrsts = PWRSTS_OFF_ON, + .flags = POLL_CFG_GDSCR, +}; + +>>>>>>> +static struct gdsc usb30_prim_gdsc = { + .gdscr = 0xf004, + .pd = { + .name = "usb30_prim_gdsc", + }, + .pwrsts = PWRSTS_OFF_ON, + .flags = POLL_CFG_GDSCR, +}; + +static struct gdsc usb30_sec_gdsc = { + .gdscr = 0x10004, + .pd = { + .name = "usb30_sec_gdsc", + }, + .pwrsts = PWRSTS_OFF_ON, + .flags = POLL_CFG_GDSCR, +}; + +static struct clk_regmap *gcc_sm8150_clocks[] = { + [GCC_AGGRE_NOC_PCIE_TBU_CLK] = &gcc_aggre_noc_pcie_tbu_clk.clkr, + [GCC_AGGRE_UFS_CARD_AXI_CLK] = &gcc_aggre_ufs_card_axi_clk.clkr, + [GCC_AGGRE_UFS_CARD_AXI_HW_CTL_CLK] = + &gcc_aggre_ufs_card_axi_hw_ctl_clk.clkr, + [GCC_AGGRE_UFS_PHY_AXI_CLK] = &gcc_aggre_ufs_phy_axi_clk.clkr, + [GCC_AGGRE_UFS_PHY_AXI_HW_CTL_CLK] = + &gcc_aggre_ufs_phy_axi_hw_ctl_clk.clkr, + [GCC_AGGRE_USB3_PRIM_AXI_CLK] = &gcc_aggre_usb3_prim_axi_clk.clkr, + [GCC_AGGRE_USB3_SEC_AXI_CLK] = &gcc_aggre_usb3_sec_axi_clk.clkr, + [GCC_BOOT_ROM_AHB_CLK] = &gcc_boot_rom_ahb_clk.clkr, + [GCC_CAMERA_AHB_CLK] = &gcc_camera_ahb_clk.clkr, + [GCC_CAMERA_HF_AXI_CLK] = &gcc_camera_hf_axi_clk.clkr, + [GCC_CAMERA_SF_AXI_CLK] = &gcc_camera_sf_axi_clk.clkr, + [GCC_CAMERA_XO_CLK] = &gcc_camera_xo_clk.clkr, + [GCC_CFG_NOC_USB3_PRIM_AXI_CLK] = &gcc_cfg_noc_usb3_prim_axi_clk.clkr, + [GCC_CFG_NOC_USB3_SEC_AXI_CLK] = &gcc_cfg_noc_usb3_sec_axi_clk.clkr, + [GCC_CPUSS_AHB_CLK] = &gcc_cpuss_ahb_clk.clkr, + [GCC_CPUSS_AHB_CLK_SRC] = &gcc_cpuss_ahb_clk_src.clkr, + [GCC_CPUSS_DVM_BUS_CLK] = &gcc_cpuss_dvm_bus_clk.clkr, + [GCC_CPUSS_GNOC_CLK] = &gcc_cpuss_gnoc_clk.clkr, + [GCC_CPUSS_RBCPR_CLK] = &gcc_cpuss_rbcpr_clk.clkr, + [GCC_DDRSS_GPU_AXI_CLK] = &gcc_ddrss_gpu_axi_clk.clkr, + [GCC_DISP_AHB_CLK] = &gcc_disp_ahb_clk.clkr, + [GCC_DISP_HF_AXI_CLK] = &gcc_disp_hf_axi_clk.clkr, + [GCC_DISP_SF_AXI_CLK] = &gcc_disp_sf_axi_clk.clkr, + [GCC_DISP_XO_CLK] = &gcc_disp_xo_clk.clkr, + [GCC_EMAC_AXI_CLK] = &gcc_emac_axi_clk.clkr, + [GCC_EMAC_PTP_CLK] = &gcc_emac_ptp_clk.clkr, + [GCC_EMAC_PTP_CLK_SRC] = &gcc_emac_ptp_clk_src.clkr, + [GCC_EMAC_RGMII_CLK] = &gcc_emac_rgmii_clk.clkr, + [GCC_EMAC_RGMII_CLK_SRC] = &gcc_emac_rgmii_clk_src.clkr, + [GCC_EMAC_SLV_AHB_CLK] = &gcc_emac_slv_ahb_clk.clkr, + [GCC_GP1_CLK] = &gcc_gp1_clk.clkr, + [GCC_GP1_CLK_SRC] = &gcc_gp1_clk_src.clkr, + [GCC_GP2_CLK] = &gcc_gp2_clk.clkr, + [GCC_GP2_CLK_SRC] = &gcc_gp2_clk_src.clkr, + [GCC_GP3_CLK] = &gcc_gp3_clk.clkr, + [GCC_GP3_CLK_SRC] = &gcc_gp3_clk_src.clkr, + [GCC_GPU_CFG_AHB_CLK] = &gcc_gpu_cfg_ahb_clk.clkr, + [GCC_GPU_GPLL0_CLK_SRC] = &gcc_gpu_gpll0_clk_src.clkr, + [GCC_GPU_GPLL0_DIV_CLK_SRC] = &gcc_gpu_gpll0_div_clk_src.clkr, + [GCC_GPU_IREF_CLK] = &gcc_gpu_iref_clk.clkr, + [GCC_GPU_MEMNOC_GFX_CLK] = &gcc_gpu_memnoc_gfx_clk.clkr, + [GCC_GPU_SNOC_DVM_GFX_CLK] = &gcc_gpu_snoc_dvm_gfx_clk.clkr, + [GCC_NPU_AT_CLK] = &gcc_npu_at_clk.clkr, + [GCC_NPU_AXI_CLK] = &gcc_npu_axi_clk.clkr, + [GCC_NPU_CFG_AHB_CLK] = &gcc_npu_cfg_ahb_clk.clkr, + [GCC_NPU_GPLL0_CLK_SRC] = &gcc_npu_gpll0_clk_src.clkr, + [GCC_NPU_GPLL0_DIV_CLK_SRC] = &gcc_npu_gpll0_div_clk_src.clkr, + [GCC_NPU_TRIG_CLK] = &gcc_npu_trig_clk.clkr, + [GCC_PCIE0_PHY_REFGEN_CLK] = &gcc_pcie0_phy_refgen_clk.clkr, + [GCC_PCIE1_PHY_REFGEN_CLK] = &gcc_pcie1_phy_refgen_clk.clkr, + [GCC_PCIE_0_AUX_CLK] = &gcc_pcie_0_aux_clk.clkr, + [GCC_PCIE_0_AUX_CLK_SRC] = &gcc_pcie_0_aux_clk_src.clkr, + [GCC_PCIE_0_CFG_AHB_CLK] = &gcc_pcie_0_cfg_ahb_clk.clkr, + [GCC_PCIE_0_CLKREF_CLK] = &gcc_pcie_0_clkref_clk.clkr, + [GCC_PCIE_0_MSTR_AXI_CLK] = &gcc_pcie_0_mstr_axi_clk.clkr, + [GCC_PCIE_0_PIPE_CLK] = &gcc_pcie_0_pipe_clk.clkr, + [GCC_PCIE_0_SLV_AXI_CLK] = &gcc_pcie_0_slv_axi_clk.clkr, + [GCC_PCIE_0_SLV_Q2A_AXI_CLK] = &gcc_pcie_0_slv_q2a_axi_clk.clkr, + [GCC_PCIE_1_AUX_CLK] = &gcc_pcie_1_aux_clk.clkr, + [GCC_PCIE_1_AUX_CLK_SRC] = &gcc_pcie_1_aux_clk_src.clkr, + [GCC_PCIE_1_CFG_AHB_CLK] = &gcc_pcie_1_cfg_ahb_clk.clkr, + [GCC_PCIE_1_CLKREF_CLK] = &gcc_pcie_1_clkref_clk.clkr, + [GCC_PCIE_1_MSTR_AXI_CLK] = &gcc_pcie_1_mstr_axi_clk.clkr, + [GCC_PCIE_1_PIPE_CLK] = &gcc_pcie_1_pipe_clk.clkr, + [GCC_PCIE_1_SLV_AXI_CLK] = &gcc_pcie_1_slv_axi_clk.clkr, + [GCC_PCIE_1_SLV_Q2A_AXI_CLK] = &gcc_pcie_1_slv_q2a_axi_clk.clkr, + [GCC_PCIE_PHY_AUX_CLK] = &gcc_pcie_phy_aux_clk.clkr, + [GCC_PCIE_PHY_REFGEN_CLK_SRC] = &gcc_pcie_phy_refgen_clk_src.clkr, + [GCC_PDM2_CLK] = &gcc_pdm2_clk.clkr, + [GCC_PDM2_CLK_SRC] = &gcc_pdm2_clk_src.clkr, + [GCC_PDM_AHB_CLK] = &gcc_pdm_ahb_clk.clkr, + [GCC_PDM_XO4_CLK] = &gcc_pdm_xo4_clk.clkr, + [GCC_PRNG_AHB_CLK] = &gcc_prng_ahb_clk.clkr, + [GCC_QMIP_CAMERA_NRT_AHB_CLK] = &gcc_qmip_camera_nrt_ahb_clk.clkr, + [GCC_QMIP_CAMERA_RT_AHB_CLK] = &gcc_qmip_camera_rt_ahb_clk.clkr, + [GCC_QMIP_DISP_AHB_CLK] = &gcc_qmip_disp_ahb_clk.clkr, + [GCC_QMIP_VIDEO_CVP_AHB_CLK] = &gcc_qmip_video_cvp_ahb_clk.clkr, + [GCC_QMIP_VIDEO_VCODEC_AHB_CLK] = &gcc_qmip_video_vcodec_ahb_clk.clkr, + [GCC_QSPI_CNOC_PERIPH_AHB_CLK] = &gcc_qspi_cnoc_periph_ahb_clk.clkr, + [GCC_QSPI_CORE_CLK] = &gcc_qspi_core_clk.clkr, + [GCC_QSPI_CORE_CLK_SRC] = &gcc_qspi_core_clk_src.clkr, + [GCC_QUPV3_WRAP0_S0_CLK] = &gcc_qupv3_wrap0_s0_clk.clkr, + [GCC_QUPV3_WRAP0_S0_CLK_SRC] = &gcc_qupv3_wrap0_s0_clk_src.clkr, + [GCC_QUPV3_WRAP0_S1_CLK] = &gcc_qupv3_wrap0_s1_clk.clkr, + [GCC_QUPV3_WRAP0_S1_CLK_SRC] = &gcc_qupv3_wrap0_s1_clk_src.clkr, + [GCC_QUPV3_WRAP0_S2_CLK] = &gcc_qupv3_wrap0_s2_clk.clkr, + [GCC_QUPV3_WRAP0_S2_CLK_SRC] = &gcc_qupv3_wrap0_s2_clk_src.clkr, + [GCC_QUPV3_WRAP0_S3_CLK] = &gcc_qupv3_wrap0_s3_clk.clkr, + [GCC_QUPV3_WRAP0_S3_CLK_SRC] = &gcc_qupv3_wrap0_s3_clk_src.clkr, + [GCC_QUPV3_WRAP0_S4_CLK] = &gcc_qupv3_wrap0_s4_clk.clkr, + [GCC_QUPV3_WRAP0_S4_CLK_SRC] = &gcc_qupv3_wrap0_s4_clk_src.clkr, + [GCC_QUPV3_WRAP0_S5_CLK] = &gcc_qupv3_wrap0_s5_clk.clkr, + [GCC_QUPV3_WRAP0_S5_CLK_SRC] = &gcc_qupv3_wrap0_s5_clk_src.clkr, + [GCC_QUPV3_WRAP0_S6_CLK] = &gcc_qupv3_wrap0_s6_clk.clkr, + [GCC_QUPV3_WRAP0_S6_CLK_SRC] = &gcc_qupv3_wrap0_s6_clk_src.clkr, + [GCC_QUPV3_WRAP0_S7_CLK] = &gcc_qupv3_wrap0_s7_clk.clkr, + [GCC_QUPV3_WRAP0_S7_CLK_SRC] = &gcc_qupv3_wrap0_s7_clk_src.clkr, + [GCC_QUPV3_WRAP1_S0_CLK] = &gcc_qupv3_wrap1_s0_clk.clkr, + [GCC_QUPV3_WRAP1_S0_CLK_SRC] = &gcc_qupv3_wrap1_s0_clk_src.clkr, + [GCC_QUPV3_WRAP1_S1_CLK] = &gcc_qupv3_wrap1_s1_clk.clkr, + [GCC_QUPV3_WRAP1_S1_CLK_SRC] = &gcc_qupv3_wrap1_s1_clk_src.clkr, + [GCC_QUPV3_WRAP1_S2_CLK] = &gcc_qupv3_wrap1_s2_clk.clkr, + [GCC_QUPV3_WRAP1_S2_CLK_SRC] = &gcc_qupv3_wrap1_s2_clk_src.clkr, + [GCC_QUPV3_WRAP1_S3_CLK] = &gcc_qupv3_wrap1_s3_clk.clkr, + [GCC_QUPV3_WRAP1_S3_CLK_SRC] = &gcc_qupv3_wrap1_s3_clk_src.clkr, + [GCC_QUPV3_WRAP1_S4_CLK] = &gcc_qupv3_wrap1_s4_clk.clkr, + [GCC_QUPV3_WRAP1_S4_CLK_SRC] = &gcc_qupv3_wrap1_s4_clk_src.clkr, + [GCC_QUPV3_WRAP1_S5_CLK] = &gcc_qupv3_wrap1_s5_clk.clkr, + [GCC_QUPV3_WRAP1_S5_CLK_SRC] = &gcc_qupv3_wrap1_s5_clk_src.clkr, + [GCC_QUPV3_WRAP2_S0_CLK] = &gcc_qupv3_wrap2_s0_clk.clkr, + [GCC_QUPV3_WRAP2_S0_CLK_SRC] = &gcc_qupv3_wrap2_s0_clk_src.clkr, + [GCC_QUPV3_WRAP2_S1_CLK] = &gcc_qupv3_wrap2_s1_clk.clkr, + [GCC_QUPV3_WRAP2_S1_CLK_SRC] = &gcc_qupv3_wrap2_s1_clk_src.clkr, + [GCC_QUPV3_WRAP2_S2_CLK] = &gcc_qupv3_wrap2_s2_clk.clkr, + [GCC_QUPV3_WRAP2_S2_CLK_SRC] = &gcc_qupv3_wrap2_s2_clk_src.clkr, + [GCC_QUPV3_WRAP2_S3_CLK] = &gcc_qupv3_wrap2_s3_clk.clkr, + [GCC_QUPV3_WRAP2_S3_CLK_SRC] = &gcc_qupv3_wrap2_s3_clk_src.clkr, + [GCC_QUPV3_WRAP2_S4_CLK] = &gcc_qupv3_wrap2_s4_clk.clkr, + [GCC_QUPV3_WRAP2_S4_CLK_SRC] = &gcc_qupv3_wrap2_s4_clk_src.clkr, + [GCC_QUPV3_WRAP2_S5_CLK] = &gcc_qupv3_wrap2_s5_clk.clkr, + [GCC_QUPV3_WRAP2_S5_CLK_SRC] = &gcc_qupv3_wrap2_s5_clk_src.clkr, + [GCC_QUPV3_WRAP_0_M_AHB_CLK] = &gcc_qupv3_wrap_0_m_ahb_clk.clkr, + [GCC_QUPV3_WRAP_0_S_AHB_CLK] = &gcc_qupv3_wrap_0_s_ahb_clk.clkr, + [GCC_QUPV3_WRAP_1_M_AHB_CLK] = &gcc_qupv3_wrap_1_m_ahb_clk.clkr, + [GCC_QUPV3_WRAP_1_S_AHB_CLK] = &gcc_qupv3_wrap_1_s_ahb_clk.clkr, + [GCC_QUPV3_WRAP_2_M_AHB_CLK] = &gcc_qupv3_wrap_2_m_ahb_clk.clkr, + [GCC_QUPV3_WRAP_2_S_AHB_CLK] = &gcc_qupv3_wrap_2_s_ahb_clk.clkr, + [GCC_SDCC2_AHB_CLK] = &gcc_sdcc2_ahb_clk.clkr, + [GCC_SDCC2_APPS_CLK] = &gcc_sdcc2_apps_clk.clkr, + [GCC_SDCC2_APPS_CLK_SRC] = &gcc_sdcc2_apps_clk_src.clkr, + [GCC_SDCC4_AHB_CLK] = &gcc_sdcc4_ahb_clk.clkr, + [GCC_SDCC4_APPS_CLK] = &gcc_sdcc4_apps_clk.clkr, + [GCC_SDCC4_APPS_CLK_SRC] = &gcc_sdcc4_apps_clk_src.clkr, + [GCC_SYS_NOC_CPUSS_AHB_CLK] = &gcc_sys_noc_cpuss_ahb_clk.clkr, + [GCC_TSIF_AHB_CLK] = &gcc_tsif_ahb_clk.clkr, + [GCC_TSIF_INACTIVITY_TIMERS_CLK] = &gcc_tsif_inactivity_timers_clk.clkr, + [GCC_TSIF_REF_CLK] = &gcc_tsif_ref_clk.clkr, + [GCC_TSIF_REF_CLK_SRC] = &gcc_tsif_ref_clk_src.clkr, + [GCC_UFS_CARD_AHB_CLK] = &gcc_ufs_card_ahb_clk.clkr, + [GCC_UFS_CARD_AXI_CLK] = &gcc_ufs_card_axi_clk.clkr, + [GCC_UFS_CARD_AXI_CLK_SRC] = &gcc_ufs_card_axi_clk_src.clkr, + [GCC_UFS_CARD_AXI_HW_CTL_CLK] = &gcc_ufs_card_axi_hw_ctl_clk.clkr, + [GCC_UFS_CARD_CLKREF_CLK] = &gcc_ufs_card_clkref_clk.clkr, + [GCC_UFS_CARD_ICE_CORE_CLK] = &gcc_ufs_card_ice_core_clk.clkr, + [GCC_UFS_CARD_ICE_CORE_CLK_SRC] = &gcc_ufs_card_ice_core_clk_src.clkr, + [GCC_UFS_CARD_ICE_CORE_HW_CTL_CLK] = + &gcc_ufs_card_ice_core_hw_ctl_clk.clkr, + [GCC_UFS_CARD_PHY_AUX_CLK] = &gcc_ufs_card_phy_aux_clk.clkr, + [GCC_UFS_CARD_PHY_AUX_CLK_SRC] = &gcc_ufs_card_phy_aux_clk_src.clkr, + [GCC_UFS_CARD_PHY_AUX_HW_CTL_CLK] = + &gcc_ufs_card_phy_aux_hw_ctl_clk.clkr, + [GCC_UFS_CARD_RX_SYMBOL_0_CLK] = &gcc_ufs_card_rx_symbol_0_clk.clkr, + [GCC_UFS_CARD_RX_SYMBOL_1_CLK] = &gcc_ufs_card_rx_symbol_1_clk.clkr, + [GCC_UFS_CARD_TX_SYMBOL_0_CLK] = &gcc_ufs_card_tx_symbol_0_clk.clkr, + [GCC_UFS_CARD_UNIPRO_CORE_CLK] = &gcc_ufs_card_unipro_core_clk.clkr, + [GCC_UFS_CARD_UNIPRO_CORE_CLK_SRC] = + &gcc_ufs_card_unipro_core_clk_src.clkr, + [GCC_UFS_CARD_UNIPRO_CORE_HW_CTL_CLK] = + &gcc_ufs_card_unipro_core_hw_ctl_clk.clkr, + [GCC_UFS_MEM_CLKREF_CLK] = &gcc_ufs_mem_clkref_clk.clkr, + [GCC_UFS_PHY_AHB_CLK] = &gcc_ufs_phy_ahb_clk.clkr, + [GCC_UFS_PHY_AXI_CLK] = &gcc_ufs_phy_axi_clk.clkr, + [GCC_UFS_PHY_AXI_CLK_SRC] = &gcc_ufs_phy_axi_clk_src.clkr, + [GCC_UFS_PHY_AXI_HW_CTL_CLK] = &gcc_ufs_phy_axi_hw_ctl_clk.clkr, + [GCC_UFS_PHY_ICE_CORE_CLK] = &gcc_ufs_phy_ice_core_clk.clkr, + [GCC_UFS_PHY_ICE_CORE_CLK_SRC] = &gcc_ufs_phy_ice_core_clk_src.clkr, + [GCC_UFS_PHY_ICE_CORE_HW_CTL_CLK] = + &gcc_ufs_phy_ice_core_hw_ctl_clk.clkr, + [GCC_UFS_PHY_PHY_AUX_CLK] = &gcc_ufs_phy_phy_aux_clk.clkr, + [GCC_UFS_PHY_PHY_AUX_CLK_SRC] = &gcc_ufs_phy_phy_aux_clk_src.clkr, + [GCC_UFS_PHY_PHY_AUX_HW_CTL_CLK] = &gcc_ufs_phy_phy_aux_hw_ctl_clk.clkr, + [GCC_UFS_PHY_RX_SYMBOL_0_CLK] = &gcc_ufs_phy_rx_symbol_0_clk.clkr, + [GCC_UFS_PHY_RX_SYMBOL_1_CLK] = &gcc_ufs_phy_rx_symbol_1_clk.clkr, + [GCC_UFS_PHY_TX_SYMBOL_0_CLK] = &gcc_ufs_phy_tx_symbol_0_clk.clkr, + [GCC_UFS_PHY_UNIPRO_CORE_CLK] = &gcc_ufs_phy_unipro_core_clk.clkr, + [GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC] = + &gcc_ufs_phy_unipro_core_clk_src.clkr, + [GCC_UFS_PHY_UNIPRO_CORE_HW_CTL_CLK] = + &gcc_ufs_phy_unipro_core_hw_ctl_clk.clkr, + [GCC_USB30_PRIM_MASTER_CLK] = &gcc_usb30_prim_master_clk.clkr, + [GCC_USB30_PRIM_MASTER_CLK_SRC] = &gcc_usb30_prim_master_clk_src.clkr, + [GCC_USB30_PRIM_MOCK_UTMI_CLK] = &gcc_usb30_prim_mock_utmi_clk.clkr, + [GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC] = + &gcc_usb30_prim_mock_utmi_clk_src.clkr, + [GCC_USB30_PRIM_SLEEP_CLK] = &gcc_usb30_prim_sleep_clk.clkr, + [GCC_USB30_SEC_MASTER_CLK] = &gcc_usb30_sec_master_clk.clkr, + [GCC_USB30_SEC_MASTER_CLK_SRC] = &gcc_usb30_sec_master_clk_src.clkr, + [GCC_USB30_SEC_MOCK_UTMI_CLK] = &gcc_usb30_sec_mock_utmi_clk.clkr, + [GCC_USB30_SEC_MOCK_UTMI_CLK_SRC] = + &gcc_usb30_sec_mock_utmi_clk_src.clkr, + [GCC_USB30_SEC_SLEEP_CLK] = &gcc_usb30_sec_sleep_clk.clkr, + [GCC_USB3_PRIM_CLKREF_CLK] = &gcc_usb3_prim_clkref_clk.clkr, + [GCC_USB3_PRIM_PHY_AUX_CLK] = &gcc_usb3_prim_phy_aux_clk.clkr, + [GCC_USB3_PRIM_PHY_AUX_CLK_SRC] = &gcc_usb3_prim_phy_aux_clk_src.clkr, + [GCC_USB3_PRIM_PHY_COM_AUX_CLK] = &gcc_usb3_prim_phy_com_aux_clk.clkr, + [GCC_USB3_PRIM_PHY_PIPE_CLK] = &gcc_usb3_prim_phy_pipe_clk.clkr, + [GCC_USB3_SEC_CLKREF_CLK] = &gcc_usb3_sec_clkref_clk.clkr, + [GCC_USB3_SEC_PHY_AUX_CLK] = &gcc_usb3_sec_phy_aux_clk.clkr, + [GCC_USB3_SEC_PHY_AUX_CLK_SRC] = &gcc_usb3_sec_phy_aux_clk_src.clkr, + [GCC_USB3_SEC_PHY_COM_AUX_CLK] = &gcc_usb3_sec_phy_com_aux_clk.clkr, + [GCC_USB3_SEC_PHY_PIPE_CLK] = &gcc_usb3_sec_phy_pipe_clk.clkr, + [GCC_VIDEO_AHB_CLK] = &gcc_video_ahb_clk.clkr, + [GCC_VIDEO_AXI0_CLK] = &gcc_video_axi0_clk.clkr, + [GCC_VIDEO_AXI1_CLK] = &gcc_video_axi1_clk.clkr, + [GCC_VIDEO_AXIC_CLK] = &gcc_video_axic_clk.clkr, + [GCC_VIDEO_XO_CLK] = &gcc_video_xo_clk.clkr, + [GPLL0] = &gpll0.clkr, + [GPLL0_OUT_EVEN] = &gpll0_out_even.clkr, + [GPLL7] = &gpll7.clkr, + [GPLL9] = &gpll9.clkr, +}; + +static const struct qcom_reset_map gcc_sm8150_resets[] = { + [GCC_EMAC_BCR] = { 0x6000 }, + [GCC_GPU_BCR] = { 0x71000 }, + [GCC_MMSS_BCR] = { 0xb000 }, + [GCC_NPU_BCR] = { 0x4d000 }, + [GCC_PCIE_0_BCR] = { 0x6b000 }, + [GCC_PCIE_0_PHY_BCR] = { 0x6c01c }, + [GCC_PCIE_1_BCR] = { 0x8d000 }, + [GCC_PCIE_1_PHY_BCR] = { 0x8e01c }, + [GCC_PCIE_PHY_BCR] = { 0x6f000 }, + [GCC_PDM_BCR] = { 0x33000 }, + [GCC_PRNG_BCR] = { 0x34000 }, + [GCC_QSPI_BCR] = { 0x24008 }, + [GCC_QUPV3_WRAPPER_0_BCR] = { 0x17000 }, + [GCC_QUPV3_WRAPPER_1_BCR] = { 0x18000 }, + [GCC_QUPV3_WRAPPER_2_BCR] = { 0x1e000 }, + [GCC_QUSB2PHY_PRIM_BCR] = { 0x12000 }, + [GCC_QUSB2PHY_SEC_BCR] = { 0x12004 }, + [GCC_USB3_PHY_PRIM_BCR] = { 0x50000 }, + [GCC_USB3_DP_PHY_PRIM_BCR] = { 0x50008 }, + [GCC_USB3_PHY_SEC_BCR] = { 0x5000c }, + [GCC_USB3PHY_PHY_SEC_BCR] = { 0x50010 }, + [GCC_SDCC2_BCR] = { 0x14000 }, + [GCC_SDCC4_BCR] = { 0x16000 }, + [GCC_TSIF_BCR] = { 0x36000 }, + [GCC_UFS_CARD_BCR] = { 0x75000 }, + [GCC_UFS_PHY_BCR] = { 0x77000 }, + [GCC_USB30_PRIM_BCR] = { 0xf000 }, + [GCC_USB30_SEC_BCR] = { 0x10000 }, + [GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x6a000 }, +}; + +static struct gdsc *gcc_sm8150_gdscs[] = { +<<<<<<< +======= + [EMAC_GDSC] = &emac_gdsc, + [PCIE_0_GDSC] = &pcie_0_gdsc, + [PCIE_1_GDSC] = &pcie_1_gdsc, +>>>>>>> + [UFS_CARD_GDSC] = &ufs_card_gdsc, + [UFS_PHY_GDSC] = &ufs_phy_gdsc, + [USB30_PRIM_GDSC] = &usb30_prim_gdsc, + [USB30_SEC_GDSC] = &usb30_sec_gdsc, + [EMAC_GDSC] = &emac_gdsc, +}; + +static const struct regmap_config gcc_sm8150_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0x9c040, + .fast_io = true, +}; + +static const struct qcom_cc_desc gcc_sm8150_desc = { + .config = &gcc_sm8150_regmap_config, + .clks = gcc_sm8150_clocks, + .num_clks = ARRAY_SIZE(gcc_sm8150_clocks), + .resets = gcc_sm8150_resets, + .num_resets = ARRAY_SIZE(gcc_sm8150_resets), + .gdscs = gcc_sm8150_gdscs, + .num_gdscs = ARRAY_SIZE(gcc_sm8150_gdscs), +}; + +static const struct of_device_id gcc_sm8150_match_table[] = { + { .compatible = "qcom,gcc-sm8150" }, + { } +}; +MODULE_DEVICE_TABLE(of, gcc_sm8150_match_table); + +static int gcc_sm8150_probe(struct platform_device *pdev) +{ + struct regmap *regmap; + + regmap = qcom_cc_map(pdev, &gcc_sm8150_desc); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + /* Disable the GPLL0 active input to NPU and GPU via MISC registers */ + regmap_update_bits(regmap, 0x4d110, 0x3, 0x3); + regmap_update_bits(regmap, 0x71028, 0x3, 0x3); + + return qcom_cc_really_probe(pdev, &gcc_sm8150_desc, regmap); +} + +static struct platform_driver gcc_sm8150_driver = { + .probe = gcc_sm8150_probe, + .driver = { + .name = "gcc-sm8150", + .of_match_table = gcc_sm8150_match_table, + }, +}; + +static int __init gcc_sm8150_init(void) +{ + return platform_driver_register(&gcc_sm8150_driver); +} +subsys_initcall(gcc_sm8150_init); + +static void __exit gcc_sm8150_exit(void) +{ + platform_driver_unregister(&gcc_sm8150_driver); +} +module_exit(gcc_sm8150_exit); + +MODULE_DESCRIPTION("QTI GCC SM8150 Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/rr-cache/7759a356c2b9733dc890f38f2dca3ce5138761d4/postimage b/rr-cache/7759a356c2b9733dc890f38f2dca3ce5138761d4/postimage new file mode 100644 index 0000000..458b972 --- /dev/null +++ b/rr-cache/7759a356c2b9733dc890f38f2dca3ce5138761d4/postimage @@ -0,0 +1,536 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8450.dtsi" +#include "pm8350.dtsi" +#include "pm8350b.dtsi" +#include "pm8350c.dtsi" +#include "pm8450.dtsi" +#include "pmk8350.dtsi" +#include "pmr735a.dtsi" +#include "pmr735b.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8450 QRD"; + compatible = "qcom,sm8450-qrd", "qcom,sm8450"; + + aliases { + serial0 = &uart7; + serial1 = &uart20; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + wcn6856: wcn6856 { + compatible = "qcom,wcn6855"; + #power-domain-cells = <0>; + + vddaon-supply = <&vreg_s11b_0p95>; + vddcx-supply = <&vreg_s11b_0p95>; + vddmx-supply = <&vreg_s2e_0p85>; + vddrfa1-supply = <&vreg_s1c_1p86>; + vddrfa2-supply = <&vreg_s12b_1p25>; + vddio-supply = <&vreg_s10b_1p8>; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_state &xo_clk_state>; + + xo-clk-gpios = <&tlmm 204 GPIO_ACTIVE_HIGH>; + wlan-en-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>; + }; +}; + +&apps_rsc { + pm8350-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&vreg_s11b_0p95>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&vreg_s12b_1p25>; + vdd-l8-supply = <&vreg_s2h_0p95>; + + vreg_s10b_1p8: smps10 { + regulator-name = "vreg_s10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s11b_0p95: smps11 { + regulator-name = "vreg_s11b_0p95"; + regulator-min-microvolt = <966000>; + regulator-max-microvolt = <1104000>; + }; + + vreg_s12b_1p25: smps12 { + regulator-name = "vreg_s12b_1p25"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1400000>; + }; + + vreg_l1b_0p91: ldo1 { + regulator-name = "vreg_l1b_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p07: ldo2 { + regulator-name = "vreg_l2b_3p07"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b_0p9: ldo3 { + regulator-name = "vreg_l3b_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_0p88: ldo5 { + regulator-name = "vreg_l5b_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <888000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p5: ldo7 { + regulator-name = "vreg_l7b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8350c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_bob>; + vdd-l2-l8-supply = <&vreg_bob>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_1p86: smps1 { + regulator-name = "vreg_s1c_1p86"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <2024000>; + }; + + vreg_s10c_1p05: smps10 { + regulator-name = "vreg_s10c_1p05"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_3p0: ldo3 { + regulator-name = "vreg_l3c_3p0"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-name = "vreg_l4c_1p8"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_1p8: ldo6 { + regulator-name = "vreg_l6c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-name = "vreg_l7c_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c_1p8: ldo12 { + regulator-name = "vreg_l12c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c_3p0: ldo13 { + regulator-name = "vreg_l13c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8450-rpmh-regulators { + compatible = "qcom,pm8450-rpmh-regulators"; + qcom,pmic-id = "h"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vdd-l2-supply = <&vreg_bob>; + vdd-l3-supply = <&vreg_bob>; + vdd-l4-supply = <&vreg_bob>; + + vreg_s2h_0p95: smps2 { + regulator-name = "vreg_s2h_0p95"; + regulator-min-microvolt = <848000>; + regulator-max-microvolt = <1104000>; + }; + + vreg_s3h_0p5: smps3 { + regulator-name = "vreg_s3h_0p5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + }; + + vreg_l2h_0p91: ldo2 { + regulator-name = "vreg_l2h_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3h_0p91: ldo3 { + regulator-name = "vreg_l3h_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + }; + + pmr735a-rpmh-regulators { + compatible = "qcom,pmr735a-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + + vdd-l1-l2-supply = <&vreg_s2e_0p85>; + vdd-l3-supply = <&vreg_s1e_1p25>; + vdd-l4-supply = <&vreg_s1c_1p86>; + vdd-l5-l6-supply = <&vreg_s1c_1p86>; + vdd-l7-bob-supply = <&vreg_bob>; + + vreg_s1e_1p25: smps1 { + regulator-name = "vreg_s1e_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1296000>; + }; + + vreg_s2e_0p85: smps2 { + regulator-name = "vreg_s2e_0p85"; + regulator-min-microvolt = <1012000>; + regulator-max-microvolt = <1012000>; + }; + + vreg_l1e_0p8: ldo1 { + regulator-name = "vreg_l1e_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l4e_1p7: ldo4 { + regulator-name = "vreg_l4e_1p7"; + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1776000>; + }; + + vreg_l5e_0p88: ldo5 { + regulator-name = "vreg_l5e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + vreg_l6e_1p2: ldo6 { + regulator-name = "vreg_l6e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l7e_2p8: ldo7 { + regulator-name = "vreg_l7e_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; +}; + +&pcie0 { + status = "okay"; + max-link-speed = <2>; +}; + +&pcie0_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + power-domains = <&wcn6856>; +}; + +&remoteproc_adsp { + status = "okay"; + firmware-name = "qcom/sm8450/adsp.mbn"; +}; + +&remoteproc_cdsp { + status = "okay"; + firmware-name = "qcom/sm8450/cdsp.mbn"; +}; + +&remoteproc_mpss { + status = "okay"; + firmware-name = "qcom/sm8450/modem.mbn"; +}; + +&remoteproc_slpi { + status = "okay"; + firmware-name = "qcom/sm8450/slpi.mbn"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&remoteproc_adsp { + status = "okay"; + firmware-name = "qcom/sm8450/adsp.mbn"; +}; + +&remoteproc_cdsp { + status = "okay"; + firmware-name = "qcom/sm8450/cdsp.mbn"; +}; + +&remoteproc_mpss { + status = "okay"; + firmware-name = "qcom/sm8450/modem.mbn"; +}; + +&remoteproc_slpi { + status = "okay"; + firmware-name = "qcom/sm8450/slpi.mbn"; +}; + +&tlmm { + gpio-reserved-ranges = <28 4>, <36 4>; + + bt_en_state: bt-default-state { + bt-en { + pins = "gpio81"; + function = "gpio"; + + drive-strength = <16>; + output-low; + bias-pull-up; + }; + }; + + xo_clk_state: xo_clk_state { + pinconf { + pins = "gpio204"; + function = "gpio"; + + drive-strength = <16>; + output-low; + bias-pull-down; + }; + }; + + wlan_en_state: wlan_en_state { + pinconf { + pins = "gpio80"; + function = "gpio"; + + drive-strength = <16>; + output-low; + bias-pull-down; + }; + }; +}; + +&uart7 { + status = "okay"; +}; + +&uart20 { + status = "okay"; + bluetooth { + /* a little lie */ + compatible = "qcom,wcn6855-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_state>; + power-domains = <&wcn6856>; + enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; + }; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7b_2p5>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <1200000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + vdda-max-microamp = <173000>; + vdda-pll-max-microamp = <24900>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5b_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p07>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p91>; +}; diff --git a/rr-cache/7759a356c2b9733dc890f38f2dca3ce5138761d4/preimage b/rr-cache/7759a356c2b9733dc890f38f2dca3ce5138761d4/preimage new file mode 100644 index 0000000..cb6c7d0 --- /dev/null +++ b/rr-cache/7759a356c2b9733dc890f38f2dca3ce5138761d4/preimage @@ -0,0 +1,537 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8450.dtsi" +#include "pm8350.dtsi" +#include "pm8350b.dtsi" +#include "pm8350c.dtsi" +#include "pm8450.dtsi" +#include "pmk8350.dtsi" +#include "pmr735a.dtsi" +#include "pmr735b.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8450 QRD"; + compatible = "qcom,sm8450-qrd", "qcom,sm8450"; + + aliases { + serial0 = &uart7; + serial1 = &uart20; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + wcn6856: wcn6856 { + compatible = "qcom,wcn6855"; + #power-domain-cells = <0>; + + vddaon-supply = <&vreg_s11b_0p95>; + vddcx-supply = <&vreg_s11b_0p95>; + vddmx-supply = <&vreg_s2e_0p85>; + vddrfa1-supply = <&vreg_s1c_1p86>; + vddrfa2-supply = <&vreg_s12b_1p25>; + vddio-supply = <&vreg_s10b_1p8>; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_state &xo_clk_state>; + + xo-clk-gpios = <&tlmm 204 GPIO_ACTIVE_HIGH>; + wlan-en-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>; + }; +}; + +&apps_rsc { + pm8350-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&vreg_s11b_0p95>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&vreg_s12b_1p25>; + vdd-l8-supply = <&vreg_s2h_0p95>; + + vreg_s10b_1p8: smps10 { + regulator-name = "vreg_s10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s11b_0p95: smps11 { + regulator-name = "vreg_s11b_0p95"; + regulator-min-microvolt = <966000>; + regulator-max-microvolt = <1104000>; + }; + + vreg_s12b_1p25: smps12 { + regulator-name = "vreg_s12b_1p25"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1400000>; + }; + + vreg_l1b_0p91: ldo1 { + regulator-name = "vreg_l1b_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p07: ldo2 { + regulator-name = "vreg_l2b_3p07"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b_0p9: ldo3 { + regulator-name = "vreg_l3b_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_0p88: ldo5 { + regulator-name = "vreg_l5b_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <888000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p5: ldo7 { + regulator-name = "vreg_l7b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8350c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_bob>; + vdd-l2-l8-supply = <&vreg_bob>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_1p86: smps1 { + regulator-name = "vreg_s1c_1p86"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <2024000>; + }; + + vreg_s10c_1p05: smps10 { + regulator-name = "vreg_s10c_1p05"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_3p0: ldo3 { + regulator-name = "vreg_l3c_3p0"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-name = "vreg_l4c_1p8"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_1p8: ldo6 { + regulator-name = "vreg_l6c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-name = "vreg_l7c_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c_1p8: ldo12 { + regulator-name = "vreg_l12c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c_3p0: ldo13 { + regulator-name = "vreg_l13c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8450-rpmh-regulators { + compatible = "qcom,pm8450-rpmh-regulators"; + qcom,pmic-id = "h"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vdd-l2-supply = <&vreg_bob>; + vdd-l3-supply = <&vreg_bob>; + vdd-l4-supply = <&vreg_bob>; + + vreg_s2h_0p95: smps2 { + regulator-name = "vreg_s2h_0p95"; + regulator-min-microvolt = <848000>; + regulator-max-microvolt = <1104000>; + }; + + vreg_s3h_0p5: smps3 { + regulator-name = "vreg_s3h_0p5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + }; + + vreg_l2h_0p91: ldo2 { + regulator-name = "vreg_l2h_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3h_0p91: ldo3 { + regulator-name = "vreg_l3h_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + }; + + pmr735a-rpmh-regulators { + compatible = "qcom,pmr735a-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + + vdd-l1-l2-supply = <&vreg_s2e_0p85>; + vdd-l3-supply = <&vreg_s1e_1p25>; + vdd-l4-supply = <&vreg_s1c_1p86>; + vdd-l5-l6-supply = <&vreg_s1c_1p86>; + vdd-l7-bob-supply = <&vreg_bob>; + + vreg_s1e_1p25: smps1 { + regulator-name = "vreg_s1e_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1296000>; + }; + + vreg_s2e_0p85: smps2 { + regulator-name = "vreg_s2e_0p85"; + regulator-min-microvolt = <1012000>; + regulator-max-microvolt = <1012000>; + }; + + vreg_l1e_0p8: ldo1 { + regulator-name = "vreg_l1e_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l4e_1p7: ldo4 { + regulator-name = "vreg_l4e_1p7"; + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1776000>; + }; + + vreg_l5e_0p88: ldo5 { + regulator-name = "vreg_l5e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + vreg_l6e_1p2: ldo6 { + regulator-name = "vreg_l6e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l7e_2p8: ldo7 { + regulator-name = "vreg_l7e_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; +}; + +&pcie0 { + status = "okay"; + max-link-speed = <2>; +}; + +&pcie0_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + power-domains = <&wcn6856>; +}; + +&remoteproc_adsp { + status = "okay"; + firmware-name = "qcom/sm8450/adsp.mbn"; +}; + +&remoteproc_cdsp { + status = "okay"; + firmware-name = "qcom/sm8450/cdsp.mbn"; +}; + +&remoteproc_mpss { + status = "okay"; + firmware-name = "qcom/sm8450/modem.mbn"; +}; + +&remoteproc_slpi { + status = "okay"; + firmware-name = "qcom/sm8450/slpi.mbn"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +<<<<<<< +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +======= +&remoteproc_adsp { + status = "okay"; + firmware-name = "qcom/sm8450/adsp.mbn"; +}; + +&remoteproc_cdsp { + status = "okay"; + firmware-name = "qcom/sm8450/cdsp.mbn"; +}; + +&remoteproc_mpss { + status = "okay"; + firmware-name = "qcom/sm8450/modem.mbn"; +}; + +&remoteproc_slpi { + status = "okay"; + firmware-name = "qcom/sm8450/slpi.mbn"; +>>>>>>> +}; + +&tlmm { + gpio-reserved-ranges = <28 4>, <36 4>; + + bt_en_state: bt-default-state { + bt-en { + pins = "gpio81"; + function = "gpio"; + + drive-strength = <16>; + output-low; + bias-pull-up; + }; + }; + + xo_clk_state: xo_clk_state { + pinconf { + pins = "gpio204"; + function = "gpio"; + + drive-strength = <16>; + output-low; + bias-pull-down; + }; + }; + + wlan_en_state: wlan_en_state { + pinconf { + pins = "gpio80"; + function = "gpio"; + + drive-strength = <16>; + output-low; + bias-pull-down; + }; + }; +}; + +&uart7 { + status = "okay"; +}; + +&uart20 { + status = "okay"; + bluetooth { + /* a little lie */ + compatible = "qcom,wcn6855-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_state>; + power-domains = <&wcn6856>; + enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; + }; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7b_2p5>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <1200000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + vdda-max-microamp = <173000>; + vdda-pll-max-microamp = <24900>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5b_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p07>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p91>; +}; diff --git a/rr-cache/8640534935a123af925be576d78ab931d8bde404/postimage b/rr-cache/8640534935a123af925be576d78ab931d8bde404/postimage new file mode 100644 index 0000000..83e779b --- /dev/null +++ b/rr-cache/8640534935a123af925be576d78ab931d8bde404/postimage @@ -0,0 +1,520 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * camss-csiphy-3ph-1-0.c + * + * Qualcomm MSM Camera Subsystem - CSIPHY Module 3phase v1.0 + * + * Copyright (c) 2011-2015, The Linux Foundation. All rights reserved. + * Copyright (C) 2016-2018 Linaro Ltd. + */ + +#include "camss.h" +#include "camss-csiphy.h" + +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/io.h> + +#define CSIPHY_3PH_LNn_CFG1(n) (0x000 + 0x100 * (n)) +#define CSIPHY_3PH_LNn_CFG1_SWI_REC_DLY_PRG (BIT(7) | BIT(6)) +#define CSIPHY_3PH_LNn_CFG2(n) (0x004 + 0x100 * (n)) +#define CSIPHY_3PH_LNn_CFG2_LP_REC_EN_INT BIT(3) +#define CSIPHY_3PH_LNn_CFG3(n) (0x008 + 0x100 * (n)) +#define CSIPHY_3PH_LNn_CFG4(n) (0x00c + 0x100 * (n)) +#define CSIPHY_3PH_LNn_CFG4_T_HS_CLK_MISS 0xa4 +#define CSIPHY_3PH_LNn_CFG4_T_HS_CLK_MISS_660 0xa5 +#define CSIPHY_3PH_LNn_CFG5(n) (0x010 + 0x100 * (n)) +#define CSIPHY_3PH_LNn_CFG5_T_HS_DTERM 0x02 +#define CSIPHY_3PH_LNn_CFG5_HS_REC_EQ_FQ_INT 0x50 +#define CSIPHY_3PH_LNn_TEST_IMP(n) (0x01c + 0x100 * (n)) +#define CSIPHY_3PH_LNn_TEST_IMP_HS_TERM_IMP 0xa +#define CSIPHY_3PH_LNn_MISC1(n) (0x028 + 0x100 * (n)) +#define CSIPHY_3PH_LNn_MISC1_IS_CLKLANE BIT(2) +#define CSIPHY_3PH_LNn_CFG6(n) (0x02c + 0x100 * (n)) +#define CSIPHY_3PH_LNn_CFG6_SWI_FORCE_INIT_EXIT BIT(0) +#define CSIPHY_3PH_LNn_CFG7(n) (0x030 + 0x100 * (n)) +#define CSIPHY_3PH_LNn_CFG7_SWI_T_INIT 0x2 +#define CSIPHY_3PH_LNn_CFG8(n) (0x034 + 0x100 * (n)) +#define CSIPHY_3PH_LNn_CFG8_SWI_SKIP_WAKEUP BIT(0) +#define CSIPHY_3PH_LNn_CFG8_SKEW_FILTER_ENABLE BIT(1) +#define CSIPHY_3PH_LNn_CFG9(n) (0x038 + 0x100 * (n)) +#define CSIPHY_3PH_LNn_CFG9_SWI_T_WAKEUP 0x1 +#define CSIPHY_3PH_LNn_CSI_LANE_CTRL15(n) (0x03c + 0x100 * (n)) +#define CSIPHY_3PH_LNn_CSI_LANE_CTRL15_SWI_SOT_SYMBOL 0xb8 + +#define CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(n) (0x800 + 0x4 * (n)) +#define CSIPHY_3PH_CMN_CSI_COMMON_CTRL5_CLK_ENABLE BIT(7) +#define CSIPHY_3PH_CMN_CSI_COMMON_CTRL6_COMMON_PWRDN_B BIT(0) +#define CSIPHY_3PH_CMN_CSI_COMMON_CTRL6_SHOW_REV_ID BIT(1) +#define CSIPHY_3PH_CMN_CSI_COMMON_STATUSn(n) (0x8b0 + 0x4 * (n)) + +#define CSIPHY_DEFAULT_PARAMS 0 +#define CSIPHY_LANE_ENABLE 1 +#define CSIPHY_SETTLE_CNT_LOWER_BYTE 2 +#define CSIPHY_SETTLE_CNT_HIGHER_BYTE 3 +#define CSIPHY_DNP_PARAMS 4 +#define CSIPHY_2PH_REGS 5 +#define CSIPHY_3PH_REGS 6 + +struct csiphy_reg_t { + s32 reg_addr; + s32 reg_data; + s32 delay; + u32 csiphy_param_type; +}; + +/* GEN2 1.0 2PH */ +static const struct +csiphy_reg_t lane_regs_sdm845[5][14] = { + { + {0x0004, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x002C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0034, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x001C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0014, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0028, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x003C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0000, 0x91, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0008, 0x00, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE}, + {0x000c, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0010, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0038, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0060, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0064, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS}, + }, + { + {0x0704, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x072C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0734, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x071C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0714, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0728, 0x04, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x073C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0700, 0x80, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0708, 0x14, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE}, + {0x070C, 0xA5, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0710, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0738, 0x1F, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0760, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0764, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS}, + }, + { + {0x0204, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x022C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0234, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x021C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0214, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0228, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x023C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0200, 0x91, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0208, 0x00, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE}, + {0x020C, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0210, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0238, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0260, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0264, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS}, + }, + { + {0x0404, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x042C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0434, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x041C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0414, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0428, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x043C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0400, 0x91, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0408, 0x00, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE}, + {0x040C, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0410, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0438, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0460, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0464, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS}, + }, + { + {0x0604, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x062C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0634, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x061C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0614, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0628, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x063C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0600, 0x91, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0608, 0x00, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE}, + {0x060C, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0610, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0638, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0660, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0664, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS}, + }, +}; + +/* GEN2 1.2.1 2PH */ +static const struct +csiphy_reg_t lane_regs_sm8250[5][20] = { + { + {0x0030, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0900, 0x05, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0908, 0x10, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0904, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0904, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0004, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x002C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0034, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0010, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x001C, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x003C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0008, 0x10, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE}, + {0x0000, 0x8D, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x000c, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0038, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0014, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0028, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0024, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0800, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0884, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + }, + { + {0x0730, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0C80, 0x05, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0C88, 0x10, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0C84, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0C84, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0704, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x072C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0734, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0710, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x071C, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x073C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0708, 0x10, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE}, + {0x0700, 0x80, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x070c, 0xA5, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0738, 0x1F, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0714, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0728, 0x04, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0724, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0800, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0884, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + }, + { + {0x0230, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0A00, 0x05, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0A08, 0x10, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0A04, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0A04, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0204, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x022C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0234, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0210, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x021C, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x023C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0208, 0x10, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE}, + {0x0200, 0x8D, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x020c, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0238, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0214, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0228, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0224, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0800, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0884, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + }, + { + {0x0430, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0B00, 0x05, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0B08, 0x10, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0B04, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0B04, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0404, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x042C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0434, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0410, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x041C, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x043C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0408, 0x10, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE}, + {0x0400, 0x8D, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x040c, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0438, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0414, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0428, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0424, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0800, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0884, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + }, + { + {0x0630, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0C00, 0x05, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0C08, 0x10, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0C04, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0C04, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0604, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x062C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0634, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0610, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x061C, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x063C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0608, 0x10, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE}, + {0x0600, 0x8D, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x060c, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0638, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0614, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0628, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0624, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0800, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0884, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + }, +}; + +static void csiphy_hw_version_read(struct csiphy_device *csiphy, + struct device *dev) +{ + u32 hw_version; + + writel(CSIPHY_3PH_CMN_CSI_COMMON_CTRL6_SHOW_REV_ID, + csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(6)); + + hw_version = readl_relaxed(csiphy->base + + CSIPHY_3PH_CMN_CSI_COMMON_STATUSn(12)); + hw_version |= readl_relaxed(csiphy->base + + CSIPHY_3PH_CMN_CSI_COMMON_STATUSn(13)) << 8; + hw_version |= readl_relaxed(csiphy->base + + CSIPHY_3PH_CMN_CSI_COMMON_STATUSn(14)) << 16; + hw_version |= readl_relaxed(csiphy->base + + CSIPHY_3PH_CMN_CSI_COMMON_STATUSn(15)) << 24; + + dev_dbg(dev, "CSIPHY 3PH HW Version = 0x%08x\n", hw_version); +} + +/* + * csiphy_reset - Perform software reset on CSIPHY module + * @csiphy: CSIPHY device + */ +static void csiphy_reset(struct csiphy_device *csiphy) +{ + writel_relaxed(0x1, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(0)); + usleep_range(5000, 8000); + writel_relaxed(0x0, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(0)); +} + +static irqreturn_t csiphy_isr(int irq, void *dev) +{ + struct csiphy_device *csiphy = dev; + int i; + + for (i = 0; i < 11; i++) { + int c = i + 22; + u8 val = readl_relaxed(csiphy->base + + CSIPHY_3PH_CMN_CSI_COMMON_STATUSn(i)); + + writel_relaxed(val, csiphy->base + + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(c)); + } + + writel_relaxed(0x1, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(10)); + writel_relaxed(0x0, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(10)); + + for (i = 22; i < 33; i++) + writel_relaxed(0x0, csiphy->base + + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(i)); + + return IRQ_HANDLED; +} + +/* + * csiphy_settle_cnt_calc - Calculate settle count value + * + * Helper function to calculate settle count value. This is + * based on the CSI2 T_hs_settle parameter which in turn + * is calculated based on the CSI2 transmitter link frequency. + * + * Return settle count value or 0 if the CSI2 link frequency + * is not available + */ +static u8 csiphy_settle_cnt_calc(s64 link_freq, u32 timer_clk_rate) +{ + u32 ui; /* ps */ + u32 timer_period; /* ps */ + u32 t_hs_prepare_max; /* ps */ + u32 t_hs_settle; /* ps */ + u8 settle_cnt; + + if (link_freq <= 0) + return 0; + + ui = div_u64(1000000000000LL, link_freq); + ui /= 2; + t_hs_prepare_max = 85000 + 6 * ui; + t_hs_settle = t_hs_prepare_max; + + timer_period = div_u64(1000000000000LL, timer_clk_rate); + settle_cnt = t_hs_settle / timer_period - 6; + + return settle_cnt; +} + +static void csiphy_gen1_config_lanes(struct csiphy_device *csiphy, + struct csiphy_config *cfg, + u8 settle_cnt) +{ + struct csiphy_lanes_cfg *c = &cfg->csi2->lane_cfg; + int i, l = 0; + u8 val; + + for (i = 0; i <= c->num_data; i++) { + if (i == c->num_data) + l = 7; + else + l = c->data[i].pos * 2; + + val = CSIPHY_3PH_LNn_CFG1_SWI_REC_DLY_PRG; + val |= 0x17; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_CFG1(l)); + + val = CSIPHY_3PH_LNn_CFG2_LP_REC_EN_INT; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_CFG2(l)); + + val = settle_cnt; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_CFG3(l)); + + val = CSIPHY_3PH_LNn_CFG5_T_HS_DTERM | + CSIPHY_3PH_LNn_CFG5_HS_REC_EQ_FQ_INT; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_CFG5(l)); + + val = CSIPHY_3PH_LNn_CFG6_SWI_FORCE_INIT_EXIT; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_CFG6(l)); + + val = CSIPHY_3PH_LNn_CFG7_SWI_T_INIT; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_CFG7(l)); + + val = CSIPHY_3PH_LNn_CFG8_SWI_SKIP_WAKEUP | + CSIPHY_3PH_LNn_CFG8_SKEW_FILTER_ENABLE; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_CFG8(l)); + + val = CSIPHY_3PH_LNn_CFG9_SWI_T_WAKEUP; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_CFG9(l)); + + val = CSIPHY_3PH_LNn_TEST_IMP_HS_TERM_IMP; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_TEST_IMP(l)); + + val = CSIPHY_3PH_LNn_CSI_LANE_CTRL15_SWI_SOT_SYMBOL; + writel_relaxed(val, csiphy->base + + CSIPHY_3PH_LNn_CSI_LANE_CTRL15(l)); + } + + val = CSIPHY_3PH_LNn_CFG1_SWI_REC_DLY_PRG; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_CFG1(l)); + + if (csiphy->camss->version == CAMSS_660) + val = CSIPHY_3PH_LNn_CFG4_T_HS_CLK_MISS_660; + else + val = CSIPHY_3PH_LNn_CFG4_T_HS_CLK_MISS; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_CFG4(l)); + + val = CSIPHY_3PH_LNn_MISC1_IS_CLKLANE; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_MISC1(l)); +} + +static void csiphy_gen2_config_lanes(struct csiphy_device *csiphy, + u8 settle_cnt) +{ + const struct csiphy_reg_t *r; + int i, l, array_size; + u32 val; + + switch (csiphy->camss->version) { + case CAMSS_845: + r = &lane_regs_sdm845[0][0]; + array_size = ARRAY_SIZE(lane_regs_sdm845[0]); + break; + case CAMSS_8250: + r = &lane_regs_sm8250[0][0]; + array_size = ARRAY_SIZE(lane_regs_sm8250[0]); + break; + default: + unreachable(); + } + + for (l = 0; l < 5; l++) { + for (i = 0; i < array_size; i++, r++) { + switch (r->csiphy_param_type) { + case CSIPHY_SETTLE_CNT_LOWER_BYTE: + val = settle_cnt & 0xff; + break; + case CSIPHY_DNP_PARAMS: + continue; + default: + val = r->reg_data; + break; + } + writel_relaxed(val, csiphy->base + r->reg_addr); + } + } +} + +static u8 csiphy_get_lane_mask(struct csiphy_lanes_cfg *lane_cfg) +{ + u8 lane_mask; + int i; + + lane_mask = CSIPHY_3PH_CMN_CSI_COMMON_CTRL5_CLK_ENABLE; + + for (i = 0; i < lane_cfg->num_data; i++) + lane_mask |= 1 << lane_cfg->data[i].pos; + + return lane_mask; +} + +static void csiphy_lanes_enable(struct csiphy_device *csiphy, + struct csiphy_config *cfg, + s64 link_freq, u8 lane_mask) +{ + struct csiphy_lanes_cfg *c = &cfg->csi2->lane_cfg; + bool is_gen2 = (csiphy->camss->version == CAMSS_845 || + csiphy->camss->version == CAMSS_8250); + u8 settle_cnt; + u8 val; + int i; + + settle_cnt = csiphy_settle_cnt_calc(link_freq, csiphy->timer_clk_rate); + + val = is_gen2 ? BIT(7) : BIT(c->clk.pos); + for (i = 0; i < c->num_data; i++) + val |= BIT(c->data[i].pos * 2); + + writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(5)); + + val = CSIPHY_3PH_CMN_CSI_COMMON_CTRL6_COMMON_PWRDN_B; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(6)); + + val = 0x02; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(7)); + + val = 0x00; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(0)); + + if (is_gen2) + csiphy_gen2_config_lanes(csiphy, settle_cnt); + else + csiphy_gen1_config_lanes(csiphy, cfg, settle_cnt); + + /* IRQ_MASK registers - disable all interrupts */ + for (i = 11; i < 22; i++) + writel_relaxed(0, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(i)); +} + +static void csiphy_lanes_disable(struct csiphy_device *csiphy, + struct csiphy_config *cfg) +{ + writel_relaxed(0, csiphy->base + + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(5)); + + writel_relaxed(0, csiphy->base + + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(6)); +} + +const struct csiphy_hw_ops csiphy_ops_3ph_1_0 = { + .get_lane_mask = csiphy_get_lane_mask, + .hw_version_read = csiphy_hw_version_read, + .reset = csiphy_reset, + .lanes_enable = csiphy_lanes_enable, + .lanes_disable = csiphy_lanes_disable, + .isr = csiphy_isr, +}; diff --git a/rr-cache/8640534935a123af925be576d78ab931d8bde404/preimage b/rr-cache/8640534935a123af925be576d78ab931d8bde404/preimage new file mode 100644 index 0000000..9f1e5aa --- /dev/null +++ b/rr-cache/8640534935a123af925be576d78ab931d8bde404/preimage @@ -0,0 +1,524 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * camss-csiphy-3ph-1-0.c + * + * Qualcomm MSM Camera Subsystem - CSIPHY Module 3phase v1.0 + * + * Copyright (c) 2011-2015, The Linux Foundation. All rights reserved. + * Copyright (C) 2016-2018 Linaro Ltd. + */ + +#include "camss.h" +#include "camss-csiphy.h" + +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/io.h> + +#define CSIPHY_3PH_LNn_CFG1(n) (0x000 + 0x100 * (n)) +#define CSIPHY_3PH_LNn_CFG1_SWI_REC_DLY_PRG (BIT(7) | BIT(6)) +#define CSIPHY_3PH_LNn_CFG2(n) (0x004 + 0x100 * (n)) +#define CSIPHY_3PH_LNn_CFG2_LP_REC_EN_INT BIT(3) +#define CSIPHY_3PH_LNn_CFG3(n) (0x008 + 0x100 * (n)) +#define CSIPHY_3PH_LNn_CFG4(n) (0x00c + 0x100 * (n)) +#define CSIPHY_3PH_LNn_CFG4_T_HS_CLK_MISS 0xa4 +#define CSIPHY_3PH_LNn_CFG4_T_HS_CLK_MISS_660 0xa5 +#define CSIPHY_3PH_LNn_CFG5(n) (0x010 + 0x100 * (n)) +#define CSIPHY_3PH_LNn_CFG5_T_HS_DTERM 0x02 +#define CSIPHY_3PH_LNn_CFG5_HS_REC_EQ_FQ_INT 0x50 +#define CSIPHY_3PH_LNn_TEST_IMP(n) (0x01c + 0x100 * (n)) +#define CSIPHY_3PH_LNn_TEST_IMP_HS_TERM_IMP 0xa +#define CSIPHY_3PH_LNn_MISC1(n) (0x028 + 0x100 * (n)) +#define CSIPHY_3PH_LNn_MISC1_IS_CLKLANE BIT(2) +#define CSIPHY_3PH_LNn_CFG6(n) (0x02c + 0x100 * (n)) +#define CSIPHY_3PH_LNn_CFG6_SWI_FORCE_INIT_EXIT BIT(0) +#define CSIPHY_3PH_LNn_CFG7(n) (0x030 + 0x100 * (n)) +#define CSIPHY_3PH_LNn_CFG7_SWI_T_INIT 0x2 +#define CSIPHY_3PH_LNn_CFG8(n) (0x034 + 0x100 * (n)) +#define CSIPHY_3PH_LNn_CFG8_SWI_SKIP_WAKEUP BIT(0) +#define CSIPHY_3PH_LNn_CFG8_SKEW_FILTER_ENABLE BIT(1) +#define CSIPHY_3PH_LNn_CFG9(n) (0x038 + 0x100 * (n)) +#define CSIPHY_3PH_LNn_CFG9_SWI_T_WAKEUP 0x1 +#define CSIPHY_3PH_LNn_CSI_LANE_CTRL15(n) (0x03c + 0x100 * (n)) +#define CSIPHY_3PH_LNn_CSI_LANE_CTRL15_SWI_SOT_SYMBOL 0xb8 + +#define CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(n) (0x800 + 0x4 * (n)) +#define CSIPHY_3PH_CMN_CSI_COMMON_CTRL5_CLK_ENABLE BIT(7) +#define CSIPHY_3PH_CMN_CSI_COMMON_CTRL6_COMMON_PWRDN_B BIT(0) +#define CSIPHY_3PH_CMN_CSI_COMMON_CTRL6_SHOW_REV_ID BIT(1) +#define CSIPHY_3PH_CMN_CSI_COMMON_STATUSn(n) (0x8b0 + 0x4 * (n)) + +#define CSIPHY_DEFAULT_PARAMS 0 +#define CSIPHY_LANE_ENABLE 1 +#define CSIPHY_SETTLE_CNT_LOWER_BYTE 2 +#define CSIPHY_SETTLE_CNT_HIGHER_BYTE 3 +#define CSIPHY_DNP_PARAMS 4 +#define CSIPHY_2PH_REGS 5 +#define CSIPHY_3PH_REGS 6 + +struct csiphy_reg_t { + s32 reg_addr; + s32 reg_data; + s32 delay; + u32 csiphy_param_type; +}; + +/* GEN2 1.0 2PH */ +static const struct +csiphy_reg_t lane_regs_sdm845[5][14] = { + { + {0x0004, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x002C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0034, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x001C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0014, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0028, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x003C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0000, 0x91, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0008, 0x00, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE}, + {0x000c, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0010, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0038, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0060, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0064, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS}, + }, + { + {0x0704, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x072C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0734, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x071C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0714, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0728, 0x04, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x073C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0700, 0x80, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0708, 0x14, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE}, + {0x070C, 0xA5, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0710, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0738, 0x1F, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0760, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0764, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS}, + }, + { + {0x0204, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x022C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0234, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x021C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0214, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0228, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x023C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0200, 0x91, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0208, 0x00, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE}, + {0x020C, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0210, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0238, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0260, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0264, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS}, + }, + { + {0x0404, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x042C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0434, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x041C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0414, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0428, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x043C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0400, 0x91, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0408, 0x00, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE}, + {0x040C, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0410, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0438, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0460, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0464, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS}, + }, + { + {0x0604, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x062C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0634, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x061C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0614, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0628, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x063C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0600, 0x91, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0608, 0x00, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE}, + {0x060C, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0610, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0638, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0660, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0664, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS}, + }, +}; + +/* GEN2 1.2.1 2PH */ +static const struct +csiphy_reg_t lane_regs_sm8250[5][20] = { + { + {0x0030, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0900, 0x05, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0908, 0x10, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0904, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0904, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0004, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x002C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0034, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0010, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x001C, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x003C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0008, 0x10, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE}, + {0x0000, 0x8D, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x000c, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0038, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0014, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0028, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0024, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0800, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0884, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + }, + { + {0x0730, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0C80, 0x05, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0C88, 0x10, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0C84, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0C84, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0704, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x072C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0734, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0710, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x071C, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x073C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0708, 0x10, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE}, + {0x0700, 0x80, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x070c, 0xA5, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0738, 0x1F, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0714, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0728, 0x04, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0724, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0800, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0884, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + }, + { + {0x0230, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0A00, 0x05, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0A08, 0x10, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0A04, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0A04, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0204, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x022C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0234, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0210, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x021C, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x023C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0208, 0x10, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE}, + {0x0200, 0x8D, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x020c, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0238, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0214, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0228, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0224, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0800, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0884, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + }, + { + {0x0430, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0B00, 0x05, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0B08, 0x10, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0B04, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0B04, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0404, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x042C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0434, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0410, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x041C, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x043C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0408, 0x10, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE}, + {0x0400, 0x8D, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x040c, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0438, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0414, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0428, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0424, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0800, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0884, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + }, + { + {0x0630, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0C00, 0x05, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0C08, 0x10, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0C04, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0C04, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0604, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x062C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0634, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0610, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x061C, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x063C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0608, 0x10, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE}, + {0x0600, 0x8D, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x060c, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0638, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0614, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0628, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0624, 0x00, 0x00, CSIPHY_DNP_PARAMS}, + {0x0800, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS}, + {0x0884, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS}, + }, +}; + +static void csiphy_hw_version_read(struct csiphy_device *csiphy, + struct device *dev) +{ + u32 hw_version; + + writel(CSIPHY_3PH_CMN_CSI_COMMON_CTRL6_SHOW_REV_ID, + csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(6)); + + hw_version = readl_relaxed(csiphy->base + + CSIPHY_3PH_CMN_CSI_COMMON_STATUSn(12)); + hw_version |= readl_relaxed(csiphy->base + + CSIPHY_3PH_CMN_CSI_COMMON_STATUSn(13)) << 8; + hw_version |= readl_relaxed(csiphy->base + + CSIPHY_3PH_CMN_CSI_COMMON_STATUSn(14)) << 16; + hw_version |= readl_relaxed(csiphy->base + + CSIPHY_3PH_CMN_CSI_COMMON_STATUSn(15)) << 24; + + dev_dbg(dev, "CSIPHY 3PH HW Version = 0x%08x\n", hw_version); +} + +/* + * csiphy_reset - Perform software reset on CSIPHY module + * @csiphy: CSIPHY device + */ +static void csiphy_reset(struct csiphy_device *csiphy) +{ + writel_relaxed(0x1, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(0)); + usleep_range(5000, 8000); + writel_relaxed(0x0, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(0)); +} + +static irqreturn_t csiphy_isr(int irq, void *dev) +{ + struct csiphy_device *csiphy = dev; + int i; + + for (i = 0; i < 11; i++) { + int c = i + 22; + u8 val = readl_relaxed(csiphy->base + + CSIPHY_3PH_CMN_CSI_COMMON_STATUSn(i)); + + writel_relaxed(val, csiphy->base + + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(c)); + } + + writel_relaxed(0x1, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(10)); + writel_relaxed(0x0, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(10)); + + for (i = 22; i < 33; i++) + writel_relaxed(0x0, csiphy->base + + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(i)); + + return IRQ_HANDLED; +} + +/* + * csiphy_settle_cnt_calc - Calculate settle count value + * + * Helper function to calculate settle count value. This is + * based on the CSI2 T_hs_settle parameter which in turn + * is calculated based on the CSI2 transmitter link frequency. + * + * Return settle count value or 0 if the CSI2 link frequency + * is not available + */ +static u8 csiphy_settle_cnt_calc(s64 link_freq, u32 timer_clk_rate) +{ + u32 ui; /* ps */ + u32 timer_period; /* ps */ + u32 t_hs_prepare_max; /* ps */ + u32 t_hs_settle; /* ps */ + u8 settle_cnt; + + if (link_freq <= 0) + return 0; + + ui = div_u64(1000000000000LL, link_freq); + ui /= 2; + t_hs_prepare_max = 85000 + 6 * ui; + t_hs_settle = t_hs_prepare_max; + + timer_period = div_u64(1000000000000LL, timer_clk_rate); + settle_cnt = t_hs_settle / timer_period - 6; + + return settle_cnt; +} + +static void csiphy_gen1_config_lanes(struct csiphy_device *csiphy, + struct csiphy_config *cfg, + u8 settle_cnt) +{ + struct csiphy_lanes_cfg *c = &cfg->csi2->lane_cfg; + int i, l = 0; + u8 val; + + for (i = 0; i <= c->num_data; i++) { + if (i == c->num_data) + l = 7; + else + l = c->data[i].pos * 2; + + val = CSIPHY_3PH_LNn_CFG1_SWI_REC_DLY_PRG; + val |= 0x17; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_CFG1(l)); + + val = CSIPHY_3PH_LNn_CFG2_LP_REC_EN_INT; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_CFG2(l)); + + val = settle_cnt; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_CFG3(l)); + + val = CSIPHY_3PH_LNn_CFG5_T_HS_DTERM | + CSIPHY_3PH_LNn_CFG5_HS_REC_EQ_FQ_INT; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_CFG5(l)); + + val = CSIPHY_3PH_LNn_CFG6_SWI_FORCE_INIT_EXIT; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_CFG6(l)); + + val = CSIPHY_3PH_LNn_CFG7_SWI_T_INIT; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_CFG7(l)); + + val = CSIPHY_3PH_LNn_CFG8_SWI_SKIP_WAKEUP | + CSIPHY_3PH_LNn_CFG8_SKEW_FILTER_ENABLE; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_CFG8(l)); + + val = CSIPHY_3PH_LNn_CFG9_SWI_T_WAKEUP; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_CFG9(l)); + + val = CSIPHY_3PH_LNn_TEST_IMP_HS_TERM_IMP; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_TEST_IMP(l)); + + val = CSIPHY_3PH_LNn_CSI_LANE_CTRL15_SWI_SOT_SYMBOL; + writel_relaxed(val, csiphy->base + + CSIPHY_3PH_LNn_CSI_LANE_CTRL15(l)); + } + + val = CSIPHY_3PH_LNn_CFG1_SWI_REC_DLY_PRG; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_CFG1(l)); + + if (csiphy->camss->version == CAMSS_660) + val = CSIPHY_3PH_LNn_CFG4_T_HS_CLK_MISS_660; + else + val = CSIPHY_3PH_LNn_CFG4_T_HS_CLK_MISS; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_CFG4(l)); + + val = CSIPHY_3PH_LNn_MISC1_IS_CLKLANE; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_MISC1(l)); +} + +static void csiphy_gen2_config_lanes(struct csiphy_device *csiphy, + u8 settle_cnt) +{ + const struct csiphy_reg_t *r; + int i, l, array_size; + u32 val; + + switch (csiphy->camss->version) { + case CAMSS_845: + r = &lane_regs_sdm845[0][0]; + array_size = ARRAY_SIZE(lane_regs_sdm845[0]); + break; + case CAMSS_8250: + r = &lane_regs_sm8250[0][0]; + array_size = ARRAY_SIZE(lane_regs_sm8250[0]); + break; + default: + unreachable(); + } + + for (l = 0; l < 5; l++) { + for (i = 0; i < array_size; i++, r++) { + switch (r->csiphy_param_type) { + case CSIPHY_SETTLE_CNT_LOWER_BYTE: + val = settle_cnt & 0xff; + break; + case CSIPHY_DNP_PARAMS: + continue; + default: + val = r->reg_data; + break; + } + writel_relaxed(val, csiphy->base + r->reg_addr); + } + } +} + +static u8 csiphy_get_lane_mask(struct csiphy_lanes_cfg *lane_cfg) +{ + u8 lane_mask; + int i; + + lane_mask = CSIPHY_3PH_CMN_CSI_COMMON_CTRL5_CLK_ENABLE; + + for (i = 0; i < lane_cfg->num_data; i++) + lane_mask |= 1 << lane_cfg->data[i].pos; + + return lane_mask; +} + +static void csiphy_lanes_enable(struct csiphy_device *csiphy, + struct csiphy_config *cfg, + s64 link_freq, u8 lane_mask) +{ + struct csiphy_lanes_cfg *c = &cfg->csi2->lane_cfg; + bool is_gen2 = (csiphy->camss->version == CAMSS_845 || + csiphy->camss->version == CAMSS_8250); + u8 settle_cnt; + u8 val; + int i; + + settle_cnt = csiphy_settle_cnt_calc(link_freq, csiphy->timer_clk_rate); + +<<<<<<< + val = is_gen2 ? BIT(7) : BIT(c->clk.pos); +======= + val = is_gen2 ? BIT(7) : CSIPHY_3PH_CMN_CSI_COMMON_CTRL5_CLK_ENABLE; +>>>>>>> + for (i = 0; i < c->num_data; i++) + val |= BIT(c->data[i].pos * 2); + + writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(5)); + + val = CSIPHY_3PH_CMN_CSI_COMMON_CTRL6_COMMON_PWRDN_B; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(6)); + + val = 0x02; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(7)); + + val = 0x00; + writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(0)); + + if (is_gen2) + csiphy_gen2_config_lanes(csiphy, settle_cnt); + else + csiphy_gen1_config_lanes(csiphy, cfg, settle_cnt); + + /* IRQ_MASK registers - disable all interrupts */ + for (i = 11; i < 22; i++) + writel_relaxed(0, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(i)); +} + +static void csiphy_lanes_disable(struct csiphy_device *csiphy, + struct csiphy_config *cfg) +{ + writel_relaxed(0, csiphy->base + + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(5)); + + writel_relaxed(0, csiphy->base + + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(6)); +} + +const struct csiphy_hw_ops csiphy_ops_3ph_1_0 = { + .get_lane_mask = csiphy_get_lane_mask, + .hw_version_read = csiphy_hw_version_read, + .reset = csiphy_reset, + .lanes_enable = csiphy_lanes_enable, + .lanes_disable = csiphy_lanes_disable, + .isr = csiphy_isr, +}; diff --git a/rr-cache/88308319201da00626228629820d4a9aecda8137/postimage b/rr-cache/88308319201da00626228629820d4a9aecda8137/postimage new file mode 100644 index 0000000..ca971c9 --- /dev/null +++ b/rr-cache/88308319201da00626228629820d4a9aecda8137/postimage @@ -0,0 +1,759 @@ +# SPDX-License-Identifier: GPL-2.0-only +config KRAIT_CLOCKS + bool + select KRAIT_L2_ACCESSORS + +config QCOM_GDSC + bool + select PM_GENERIC_DOMAINS if PM + +config QCOM_RPMCC + bool + +menuconfig COMMON_CLK_QCOM + tristate "Support for Qualcomm's clock controllers" + depends on OF + depends on ARCH_QCOM || COMPILE_TEST + select RATIONAL + select REGMAP_MMIO + select RESET_CONTROLLER + +if COMMON_CLK_QCOM + +config QCOM_A53PLL + tristate "MSM8916 A53 PLL" + help + Support for the A53 PLL on MSM8916 devices. It provides + the CPU with frequencies above 1GHz. + Say Y if you want to support higher CPU frequencies on MSM8916 + devices. + +config QCOM_A7PLL + tristate "A7 PLL driver for SDX55 and SDX65" + help + Support for the A7 PLL on SDX55 and SDX65 devices. It provides the CPU with + frequencies above 1GHz. + Say Y if you want to support higher CPU frequencies on SDX55 and SDX65 + devices. + +config QCOM_CLK_APCS_MSM8916 + tristate "MSM8916 APCS Clock Controller" + depends on QCOM_APCS_IPC || COMPILE_TEST + help + Support for the APCS Clock Controller on msm8916 devices. The + APCS is managing the mux and divider which feeds the CPUs. + Say Y if you want to support CPU frequency scaling on devices + such as msm8916. + +config QCOM_CLK_APCC_MSM8996 + tristate "MSM8996 CPU Clock Controller" + select QCOM_KRYO_L2_ACCESSORS + depends on ARM64 + depends on COMMON_CLK_QCOM + help + Support for the CPU clock controller on msm8996 devices. + Say Y if you want to support CPU clock scaling using CPUfreq + drivers for dynamic power management. + +config QCOM_CLK_APCS_SDX55 + tristate "SDX55 and SDX65 APCS Clock Controller" + depends on QCOM_APCS_IPC || COMPILE_TEST + help + Support for the APCS Clock Controller on SDX55, SDX65 platforms. The + APCS is managing the mux and divider which feeds the CPUs. + Say Y if you want to support CPU frequency scaling on devices + such as SDX55, SDX65. + +config QCOM_CLK_RPM + tristate "RPM based Clock Controller" + depends on MFD_QCOM_RPM + select QCOM_RPMCC + help + The RPM (Resource Power Manager) is a dedicated hardware engine for + managing the shared SoC resources in order to keep the lowest power + profile. It communicates with other hardware subsystems via shared + memory and accepts clock requests, aggregates the requests and turns + the clocks on/off or scales them on demand. + Say Y if you want to support the clocks exposed by the RPM on + platforms such as apq8064, msm8660, msm8960 etc. + +config QCOM_CLK_SMD_RPM + tristate "RPM over SMD based Clock Controller" + depends on QCOM_SMD_RPM + select QCOM_RPMCC + help + The RPM (Resource Power Manager) is a dedicated hardware engine for + managing the shared SoC resources in order to keep the lowest power + profile. It communicates with other hardware subsystems via shared + memory and accepts clock requests, aggregates the requests and turns + the clocks on/off or scales them on demand. + Say Y if you want to support the clocks exposed by the RPM on + platforms such as apq8016, apq8084, msm8974 etc. + +config QCOM_CLK_RPMH + tristate "RPMh Clock Driver" + depends on QCOM_RPMH + help + RPMh manages shared resources on some Qualcomm Technologies, Inc. + SoCs. It accepts requests from other hardware subsystems via RSC. + Say Y if you want to support the clocks exposed by RPMh on + platforms such as SDM845. + +config APQ_GCC_8084 + tristate "APQ8084 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on apq8084 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, SATA, PCIe, etc. + +config APQ_MMCC_8084 + tristate "APQ8084 Multimedia Clock Controller" + select APQ_GCC_8084 + select QCOM_GDSC + help + Support for the multimedia clock controller on apq8084 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config IPQ_APSS_PLL + tristate "IPQ APSS PLL" + help + Support for APSS PLL on ipq devices. The APSS PLL is the main + clock that feeds the CPUs on ipq based devices. + Say Y if you want to support CPU frequency scaling on ipq based + devices. + +config IPQ_APSS_6018 + tristate "IPQ APSS Clock Controller" + select IPQ_APSS_PLL + depends on QCOM_APCS_IPC || COMPILE_TEST + help + Support for APSS clock controller on IPQ platforms. The + APSS clock controller manages the Mux and enable block that feeds the + CPUs. + Say Y if you want to support CPU frequency scaling on + ipq based devices. + +config IPQ_GCC_4019 + tristate "IPQ4019 Global Clock Controller" + help + Support for the global clock controller on ipq4019 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. + +config IPQ_GCC_6018 + tristate "IPQ6018 Global Clock Controller" + help + Support for global clock controller on ipq6018 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. Select this for the root clock + of ipq6018. + +config IPQ_GCC_806X + tristate "IPQ806x Global Clock Controller" + help + Support for the global clock controller on ipq806x devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. + +config IPQ_LCC_806X + tristate "IPQ806x LPASS Clock Controller" + select IPQ_GCC_806X + help + Support for the LPASS clock controller on ipq806x devices. + Say Y if you want to use audio devices such as i2s, pcm, + S/PDIF, etc. + +config IPQ_GCC_8074 + tristate "IPQ8074 Global Clock Controller" + help + Support for global clock controller on ipq8074 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. Select this for the root clock + of ipq8074. + +config MSM_GCC_8660 + tristate "MSM8660 Global Clock Controller" + help + Support for the global clock controller on msm8660 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. + +config MSM_GCC_8916 + tristate "MSM8916 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8916 devices. + Say Y if you want to use devices such as UART, SPI i2c, USB, + SD/eMMC, display, graphics, camera etc. + +config MSM_GCC_8939 + tristate "MSM8939 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8939 devices. + Say Y if you want to use devices such as UART, SPI i2c, USB, + SD/eMMC, display, graphics, camera etc. + +config MSM_GCC_8960 + tristate "APQ8064/MSM8960 Global Clock Controller" + help + Support for the global clock controller on apq8064/msm8960 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, SATA, PCIe, etc. + +config MSM_LCC_8960 + tristate "APQ8064/MSM8960 LPASS Clock Controller" + select MSM_GCC_8960 + help + Support for the LPASS clock controller on apq8064/msm8960 devices. + Say Y if you want to use audio devices such as i2s, pcm, + SLIMBus, etc. + +config MDM_GCC_9607 + tristate "MDM9607 Global Clock Controller" + help + Support for the global clock controller on mdm9607 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + I2C, USB, SD/eMMC, etc. + +config MDM_GCC_9615 + tristate "MDM9615 Global Clock Controller" + help + Support for the global clock controller on mdm9615 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. + +config MDM_LCC_9615 + tristate "MDM9615 LPASS Clock Controller" + select MDM_GCC_9615 + help + Support for the LPASS clock controller on mdm9615 devices. + Say Y if you want to use audio devices such as i2s, pcm, + SLIMBus, etc. + +config MSM_MMCC_8960 + tristate "MSM8960 Multimedia Clock Controller" + select MSM_GCC_8960 + help + Support for the multimedia clock controller on msm8960 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config MSM_GCC_8953 + tristate "MSM8953 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8953 devices. + Say Y if you want to use devices such as UART, SPI i2c, USB, + SD/eMMC, display, graphics, camera etc. + +config MSM_GCC_8974 + tristate "MSM8974 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8974 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, SATA, PCIe, etc. + +config MSM_MMCC_8974 + tristate "MSM8974 Multimedia Clock Controller" + select MSM_GCC_8974 + select QCOM_GDSC + help + Support for the multimedia clock controller on msm8974 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config MSM_GCC_8976 + tristate "MSM8956/76 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8956/76 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, SATA, PCIe, etc. + +config MSM_MMCC_8994 + tristate "MSM8994 Multimedia Clock Controller" + select MSM_GCC_8994 + select QCOM_GDSC + help + Support for the multimedia clock controller on msm8994 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config MSM_GCC_8994 + tristate "MSM8994 Global Clock Controller" + help + Support for the global clock controller on msm8994 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, UFS, SD/eMMC, PCIe, etc. + +config MSM_GCC_8996 + tristate "MSM8996 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8996 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, UFS, SD/eMMC, PCIe, etc. + +config MSM_MMCC_8996 + tristate "MSM8996 Multimedia Clock Controller" + select MSM_GCC_8996 + select QCOM_GDSC + help + Support for the multimedia clock controller on msm8996 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config MSM_GCC_8998 + tristate "MSM8998 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8998 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, UFS, SD/eMMC, PCIe, etc. + +config MSM_GPUCC_8998 + tristate "MSM8998 Graphics Clock Controller" + select MSM_GCC_8998 + select QCOM_GDSC + help + Support for the graphics clock controller on MSM8998 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config MSM_MMCC_8998 + tristate "MSM8998 Multimedia Clock Controller" + select MSM_GCC_8998 + select QCOM_GDSC + help + Support for the multimedia clock controller on msm8998 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config QCM_GCC_2290 + tristate "QCM2290 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on QCM2290 devices. + Say Y if you want to use multimedia devices or peripheral + devices such as UART, SPI, I2C, USB, SD/eMMC etc. + +config QCM_DISPCC_2290 + tristate "QCM2290 Display Clock Controller" + select QCM_GCC_2290 + help + Support for the display clock controller on Qualcomm Technologies, Inc + QCM2290 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config QCS_GCC_404 + tristate "QCS404 Global Clock Controller" + help + Support for the global clock controller on QCS404 devices. + Say Y if you want to use multimedia devices or peripheral + devices such as UART, SPI, I2C, USB, SD/eMMC, PCIe etc. + +config SC_CAMCC_7180 + tristate "SC7180 Camera Clock Controller" + select SC_GCC_7180 + help + Support for the camera clock controller on Qualcomm Technologies, Inc + SC7180 devices. + Say Y if you want to support camera devices and functionality such as + capturing pictures. + +config SC_CAMCC_7280 + tristate "SC7280 Camera Clock Controller" + select SC_GCC_7280 + help + Support for the camera clock controller on Qualcomm Technologies, Inc + SC7280 devices. + Say Y if you want to support camera devices and functionality such as + capturing pictures. + +config SC_DISPCC_7180 + tristate "SC7180 Display Clock Controller" + select SC_GCC_7180 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SC7180 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config SC_DISPCC_7280 + tristate "SC7280 Display Clock Controller" + select SC_GCC_7280 + help + Support for the display clock controller on Qualcomm Technologies, Inc. + SC7280 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config SC_GCC_7180 + tristate "SC7180 Global Clock Controller" + select QCOM_GDSC + depends on COMMON_CLK_QCOM + help + Support for the global clock controller on SC7180 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + I2C, USB, UFS, SDCC, etc. + +config SC_GCC_7280 + tristate "SC7280 Global Clock Controller" + select QCOM_GDSC + depends on COMMON_CLK_QCOM + help + Support for the global clock controller on SC7280 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + I2C, USB, UFS, SDCC, PCIe etc. + +config SC_GCC_8180X + tristate "SC8180X Global Clock Controller" + select QCOM_GDSC + depends on COMMON_CLK_QCOM + help + Support for the global clock controller on SC8180X devices. + Say Y if you want to use peripheral devices such as UART, SPI, + I2C, USB, UFS, SDCC, etc. + +config SC_GPUCC_7180 + tristate "SC7180 Graphics Clock Controller" + select SC_GCC_7180 + help + Support for the graphics clock controller on SC7180 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SC_GPUCC_7280 + tristate "SC7280 Graphics Clock Controller" + select SC_GCC_7280 + help + Support for the graphics clock controller on SC7280 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SC_LPASSCC_7280 + tristate "SC7280 Low Power Audio Subsystem (LPASS) Clock Controller" + select SC_GCC_7280 + help + Support for the LPASS clock controller on SC7280 devices. + Say Y if you want to use the LPASS branch clocks of the LPASS clock + controller to reset the LPASS subsystem. + +config SC_LPASS_CORECC_7180 + tristate "SC7180 LPASS Core Clock Controller" + select SC_GCC_7180 + help + Support for the LPASS(Low Power Audio Subsystem) core clock controller + on SC7180 devices. + Say Y if you want to use LPASS clocks and power domains of the LPASS + core clock controller. + +config SC_MSS_7180 + tristate "SC7180 Modem Clock Controller" + select SC_GCC_7180 + help + Support for the Modem Subsystem clock controller on Qualcomm + Technologies, Inc on SC7180 devices. + Say Y if you want to use the Modem branch clocks of the Modem + subsystem clock controller to reset the MSS subsystem. + +config SC_VIDEOCC_7180 + tristate "SC7180 Video Clock Controller" + select SC_GCC_7180 + help + Support for the video clock controller on SC7180 devices. + Say Y if you want to support video devices and functionality such as + video encode and decode. + +config SC_VIDEOCC_7280 + tristate "SC7280 Video Clock Controller" + select SC_GCC_7280 + help + Support for the video clock controller on SC7280 devices. + Say Y if you want to support video devices and functionality such as + video encode and decode. + +config SDM_CAMCC_845 + tristate "SDM845 Camera Clock Controller" + select SDM_GCC_845 + help + Support for the camera clock controller on SDM845 devices. + Say Y if you want to support camera devices and camera functionality. + +config SDM_GCC_660 + tristate "SDM660 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SDM660 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2C, USB, UFS, SDDC, PCIe, etc. + +config SDM_MMCC_660 + tristate "SDM660 Multimedia Clock Controller" + select SDM_GCC_660 + select QCOM_GDSC + help + Support for the multimedia clock controller on SDM660 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config SDM_GPUCC_660 + tristate "SDM660 Graphics Clock Controller" + select SDM_GCC_660 + select QCOM_GDSC + help + Support for the graphics clock controller on SDM630/636/660 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics + +config QCS_TURING_404 + tristate "QCS404 Turing Clock Controller" + help + Support for the Turing Clock Controller on QCS404, provides clocks + and resets for the Turing subsystem. + +config QCS_Q6SSTOP_404 + tristate "QCS404 Q6SSTOP Clock Controller" + select QCS_GCC_404 + help + Support for the Q6SSTOP clock controller on QCS404 devices. + Say Y if you want to use the Q6SSTOP branch clocks of the WCSS clock + controller to reset the Q6SSTOP subsystem. + +config SDM_GCC_845 + tristate "SDM845 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SDM845 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2C, USB, UFS, SDDC, PCIe, etc. + +config SDM_GPUCC_845 + tristate "SDM845 Graphics Clock Controller" + select SDM_GCC_845 + help + Support for the graphics clock controller on SDM845 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SDM_VIDEOCC_845 + tristate "SDM845 Video Clock Controller" + select SDM_GCC_845 + select QCOM_GDSC + help + Support for the video clock controller on SDM845 devices. + Say Y if you want to support video devices and functionality such as + video encode and decode. + +config SDM_DISPCC_845 + tristate "SDM845 Display Clock Controller" + select SDM_GCC_845 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SDM845 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config SDM_LPASSCC_845 + tristate "SDM845 Low Power Audio Subsystem (LPAAS) Clock Controller" + select SDM_GCC_845 + help + Support for the LPASS clock controller on SDM845 devices. + Say Y if you want to use the LPASS branch clocks of the LPASS clock + controller to reset the LPASS subsystem. + +config SDX_GCC_55 + tristate "SDX55 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SDX55 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SDX_GCC_65 + tristate "SDX65 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SDX65 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_CAMCC_8250 + tristate "SM8250 Camera Clock Controller" + select SM_GCC_8250 + help + Support for the camera clock controller on SM8250 devices. + Say Y if you want to support camera devices and camera functionality. + +config SM_CAMCC_8450 + tristate "SM8450 Camera Clock Controller" + select SM_GCC_8450 + help + Support for the camera clock controller on SM8450 devices. + Say Y if you want to support camera devices and camera functionality. + +config SM_DISPCC_6125 + tristate "SM6125 Display Clock Controller" + depends on SM_GCC_6125 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SM6125 devices. + Say Y if you want to support display devices and functionality such as + splash screen + +config SM_DISPCC_8250 + tristate "SM8150 and SM8250 Display Clock Controller" + depends on SM_GCC_8150 || SM_GCC_8250 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SM8150 and SM8250 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config SM_DISPCC_6350 + tristate "SM6350 Display Clock Controller" + depends on SM_GCC_6350 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SM6350 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config SM_GCC_6115 + tristate "SM6115 and SM4250 Global Clock Controller" + help + Support for the global clock controller on SM6115 and SM4250 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2C, USB, UFS, SDDC, PCIe, etc. + +config SM_GCC_6125 + tristate "SM6125 Global Clock Controller" + help + Support for the global clock controller on SM6125 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GCC_6350 + tristate "SM6350 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SM6350 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GCC_8150 + tristate "SM8150 Global Clock Controller" + help + Support for the global clock controller on SM8150 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GCC_8250 + tristate "SM8250 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SM8250 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GCC_8350 + tristate "SM8350 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SM8350 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GCC_8450 + tristate "SM8450 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SM8450 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GPUCC_6350 + tristate "SM6350 Graphics Clock Controller" + select SM_GCC_6350 + help + Support for the graphics clock controller on SM6350 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SM_GPUCC_8150 + tristate "SM8150 Graphics Clock Controller" + select SM_GCC_8150 + help + Support for the graphics clock controller on SM8150 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SM_GPUCC_8250 + tristate "SM8250 Graphics Clock Controller" + select SM_GCC_8250 + help + Support for the graphics clock controller on SM8250 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SM_VIDEOCC_8150 + tristate "SM8150 Video Clock Controller" + select SM_GCC_8150 + select QCOM_GDSC + help + Support for the video clock controller on SM8150 devices. + Say Y if you want to support video devices and functionality such as + video encode and decode. + +config SM_VIDEOCC_8250 + tristate "SM8250 Video Clock Controller" + select SM_GCC_8250 + select QCOM_GDSC + help + Support for the video clock controller on SM8250 devices. + Say Y if you want to support video devices and functionality such as + video encode and decode. + +config SPMI_PMIC_CLKDIV + tristate "SPMI PMIC clkdiv Support" + depends on SPMI || COMPILE_TEST + help + This driver supports the clkdiv functionality on the Qualcomm + Technologies, Inc. SPMI PMIC. It configures the frequency of + clkdiv outputs of the PMIC. These clocks are typically wired + through alternate functions on GPIO pins. + +config QCOM_HFPLL + tristate "High-Frequency PLL (HFPLL) Clock Controller" + help + Support for the high-frequency PLLs present on Qualcomm devices. + Say Y if you want to support CPU frequency scaling on devices + such as MSM8974, APQ8084, etc. + +config KPSS_XCC + tristate "KPSS Clock Controller" + help + Support for the Krait ACC and GCC clock controllers. Say Y + if you want to support CPU frequency scaling on devices such + as MSM8960, APQ8064, etc. + +config KRAITCC + tristate "Krait Clock Controller" + depends on ARM + select KRAIT_CLOCKS + help + Support for the Krait CPU clocks on Qualcomm devices. + Say Y if you want to support CPU frequency scaling. + +config CLK_GFM_LPASS_SM8250 + tristate "SM8250 GFM LPASS Clocks" + help + Support for the Glitch Free Mux (GFM) Low power audio + subsystem (LPASS) clocks found on SM8250 SoCs. + +endif diff --git a/rr-cache/88308319201da00626228629820d4a9aecda8137/preimage b/rr-cache/88308319201da00626228629820d4a9aecda8137/preimage new file mode 100644 index 0000000..36f8d24 --- /dev/null +++ b/rr-cache/88308319201da00626228629820d4a9aecda8137/preimage @@ -0,0 +1,761 @@ +# SPDX-License-Identifier: GPL-2.0-only +config KRAIT_CLOCKS + bool + select KRAIT_L2_ACCESSORS + +config QCOM_GDSC + bool + select PM_GENERIC_DOMAINS if PM + +config QCOM_RPMCC + bool + +menuconfig COMMON_CLK_QCOM + tristate "Support for Qualcomm's clock controllers" + depends on OF + depends on ARCH_QCOM || COMPILE_TEST + select RATIONAL + select REGMAP_MMIO + select RESET_CONTROLLER + +if COMMON_CLK_QCOM + +config QCOM_A53PLL + tristate "MSM8916 A53 PLL" + help + Support for the A53 PLL on MSM8916 devices. It provides + the CPU with frequencies above 1GHz. + Say Y if you want to support higher CPU frequencies on MSM8916 + devices. + +config QCOM_A7PLL + tristate "A7 PLL driver for SDX55 and SDX65" + help + Support for the A7 PLL on SDX55 and SDX65 devices. It provides the CPU with + frequencies above 1GHz. + Say Y if you want to support higher CPU frequencies on SDX55 and SDX65 + devices. + +config QCOM_CLK_APCS_MSM8916 + tristate "MSM8916 APCS Clock Controller" + depends on QCOM_APCS_IPC || COMPILE_TEST + help + Support for the APCS Clock Controller on msm8916 devices. The + APCS is managing the mux and divider which feeds the CPUs. + Say Y if you want to support CPU frequency scaling on devices + such as msm8916. + +config QCOM_CLK_APCC_MSM8996 + tristate "MSM8996 CPU Clock Controller" + select QCOM_KRYO_L2_ACCESSORS + depends on ARM64 + depends on COMMON_CLK_QCOM + help + Support for the CPU clock controller on msm8996 devices. + Say Y if you want to support CPU clock scaling using CPUfreq + drivers for dynamic power management. + +config QCOM_CLK_APCS_SDX55 + tristate "SDX55 and SDX65 APCS Clock Controller" + depends on QCOM_APCS_IPC || COMPILE_TEST + help + Support for the APCS Clock Controller on SDX55, SDX65 platforms. The + APCS is managing the mux and divider which feeds the CPUs. + Say Y if you want to support CPU frequency scaling on devices + such as SDX55, SDX65. + +config QCOM_CLK_RPM + tristate "RPM based Clock Controller" + depends on MFD_QCOM_RPM + select QCOM_RPMCC + help + The RPM (Resource Power Manager) is a dedicated hardware engine for + managing the shared SoC resources in order to keep the lowest power + profile. It communicates with other hardware subsystems via shared + memory and accepts clock requests, aggregates the requests and turns + the clocks on/off or scales them on demand. + Say Y if you want to support the clocks exposed by the RPM on + platforms such as apq8064, msm8660, msm8960 etc. + +config QCOM_CLK_SMD_RPM + tristate "RPM over SMD based Clock Controller" + depends on QCOM_SMD_RPM + select QCOM_RPMCC + help + The RPM (Resource Power Manager) is a dedicated hardware engine for + managing the shared SoC resources in order to keep the lowest power + profile. It communicates with other hardware subsystems via shared + memory and accepts clock requests, aggregates the requests and turns + the clocks on/off or scales them on demand. + Say Y if you want to support the clocks exposed by the RPM on + platforms such as apq8016, apq8084, msm8974 etc. + +config QCOM_CLK_RPMH + tristate "RPMh Clock Driver" + depends on QCOM_RPMH + help + RPMh manages shared resources on some Qualcomm Technologies, Inc. + SoCs. It accepts requests from other hardware subsystems via RSC. + Say Y if you want to support the clocks exposed by RPMh on + platforms such as SDM845. + +config APQ_GCC_8084 + tristate "APQ8084 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on apq8084 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, SATA, PCIe, etc. + +config APQ_MMCC_8084 + tristate "APQ8084 Multimedia Clock Controller" + select APQ_GCC_8084 + select QCOM_GDSC + help + Support for the multimedia clock controller on apq8084 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config IPQ_APSS_PLL + tristate "IPQ APSS PLL" + help + Support for APSS PLL on ipq devices. The APSS PLL is the main + clock that feeds the CPUs on ipq based devices. + Say Y if you want to support CPU frequency scaling on ipq based + devices. + +config IPQ_APSS_6018 + tristate "IPQ APSS Clock Controller" + select IPQ_APSS_PLL + depends on QCOM_APCS_IPC || COMPILE_TEST + help + Support for APSS clock controller on IPQ platforms. The + APSS clock controller manages the Mux and enable block that feeds the + CPUs. + Say Y if you want to support CPU frequency scaling on + ipq based devices. + +config IPQ_GCC_4019 + tristate "IPQ4019 Global Clock Controller" + help + Support for the global clock controller on ipq4019 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. + +config IPQ_GCC_6018 + tristate "IPQ6018 Global Clock Controller" + help + Support for global clock controller on ipq6018 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. Select this for the root clock + of ipq6018. + +config IPQ_GCC_806X + tristate "IPQ806x Global Clock Controller" + help + Support for the global clock controller on ipq806x devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. + +config IPQ_LCC_806X + tristate "IPQ806x LPASS Clock Controller" + select IPQ_GCC_806X + help + Support for the LPASS clock controller on ipq806x devices. + Say Y if you want to use audio devices such as i2s, pcm, + S/PDIF, etc. + +config IPQ_GCC_8074 + tristate "IPQ8074 Global Clock Controller" + help + Support for global clock controller on ipq8074 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. Select this for the root clock + of ipq8074. + +config MSM_GCC_8660 + tristate "MSM8660 Global Clock Controller" + help + Support for the global clock controller on msm8660 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. + +config MSM_GCC_8916 + tristate "MSM8916 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8916 devices. + Say Y if you want to use devices such as UART, SPI i2c, USB, + SD/eMMC, display, graphics, camera etc. + +config MSM_GCC_8939 + tristate "MSM8939 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8939 devices. + Say Y if you want to use devices such as UART, SPI i2c, USB, + SD/eMMC, display, graphics, camera etc. + +config MSM_GCC_8960 + tristate "APQ8064/MSM8960 Global Clock Controller" + help + Support for the global clock controller on apq8064/msm8960 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, SATA, PCIe, etc. + +config MSM_LCC_8960 + tristate "APQ8064/MSM8960 LPASS Clock Controller" + select MSM_GCC_8960 + help + Support for the LPASS clock controller on apq8064/msm8960 devices. + Say Y if you want to use audio devices such as i2s, pcm, + SLIMBus, etc. + +config MDM_GCC_9607 + tristate "MDM9607 Global Clock Controller" + help + Support for the global clock controller on mdm9607 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + I2C, USB, SD/eMMC, etc. + +config MDM_GCC_9615 + tristate "MDM9615 Global Clock Controller" + help + Support for the global clock controller on mdm9615 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. + +config MDM_LCC_9615 + tristate "MDM9615 LPASS Clock Controller" + select MDM_GCC_9615 + help + Support for the LPASS clock controller on mdm9615 devices. + Say Y if you want to use audio devices such as i2s, pcm, + SLIMBus, etc. + +config MSM_MMCC_8960 + tristate "MSM8960 Multimedia Clock Controller" + select MSM_GCC_8960 + help + Support for the multimedia clock controller on msm8960 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config MSM_GCC_8953 + tristate "MSM8953 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8953 devices. + Say Y if you want to use devices such as UART, SPI i2c, USB, + SD/eMMC, display, graphics, camera etc. + +config MSM_GCC_8974 + tristate "MSM8974 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8974 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, SATA, PCIe, etc. + +config MSM_MMCC_8974 + tristate "MSM8974 Multimedia Clock Controller" + select MSM_GCC_8974 + select QCOM_GDSC + help + Support for the multimedia clock controller on msm8974 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config MSM_GCC_8976 + tristate "MSM8956/76 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8956/76 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, SATA, PCIe, etc. + +config MSM_MMCC_8994 + tristate "MSM8994 Multimedia Clock Controller" + select MSM_GCC_8994 + select QCOM_GDSC + help + Support for the multimedia clock controller on msm8994 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config MSM_GCC_8994 + tristate "MSM8994 Global Clock Controller" + help + Support for the global clock controller on msm8994 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, UFS, SD/eMMC, PCIe, etc. + +config MSM_GCC_8996 + tristate "MSM8996 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8996 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, UFS, SD/eMMC, PCIe, etc. + +config MSM_MMCC_8996 + tristate "MSM8996 Multimedia Clock Controller" + select MSM_GCC_8996 + select QCOM_GDSC + help + Support for the multimedia clock controller on msm8996 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config MSM_GCC_8998 + tristate "MSM8998 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8998 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, UFS, SD/eMMC, PCIe, etc. + +config MSM_GPUCC_8998 + tristate "MSM8998 Graphics Clock Controller" + select MSM_GCC_8998 + select QCOM_GDSC + help + Support for the graphics clock controller on MSM8998 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config MSM_MMCC_8998 + tristate "MSM8998 Multimedia Clock Controller" + select MSM_GCC_8998 + select QCOM_GDSC + help + Support for the multimedia clock controller on msm8998 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config QCM_GCC_2290 + tristate "QCM2290 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on QCM2290 devices. + Say Y if you want to use multimedia devices or peripheral + devices such as UART, SPI, I2C, USB, SD/eMMC etc. + +config QCM_DISPCC_2290 + tristate "QCM2290 Display Clock Controller" + select QCM_GCC_2290 + help + Support for the display clock controller on Qualcomm Technologies, Inc + QCM2290 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config QCS_GCC_404 + tristate "QCS404 Global Clock Controller" + help + Support for the global clock controller on QCS404 devices. + Say Y if you want to use multimedia devices or peripheral + devices such as UART, SPI, I2C, USB, SD/eMMC, PCIe etc. + +config SC_CAMCC_7180 + tristate "SC7180 Camera Clock Controller" + select SC_GCC_7180 + help + Support for the camera clock controller on Qualcomm Technologies, Inc + SC7180 devices. + Say Y if you want to support camera devices and functionality such as + capturing pictures. + +config SC_CAMCC_7280 + tristate "SC7280 Camera Clock Controller" + select SC_GCC_7280 + help + Support for the camera clock controller on Qualcomm Technologies, Inc + SC7280 devices. + Say Y if you want to support camera devices and functionality such as + capturing pictures. + +config SC_DISPCC_7180 + tristate "SC7180 Display Clock Controller" + select SC_GCC_7180 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SC7180 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config SC_DISPCC_7280 + tristate "SC7280 Display Clock Controller" + select SC_GCC_7280 + help + Support for the display clock controller on Qualcomm Technologies, Inc. + SC7280 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config SC_GCC_7180 + tristate "SC7180 Global Clock Controller" + select QCOM_GDSC + depends on COMMON_CLK_QCOM + help + Support for the global clock controller on SC7180 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + I2C, USB, UFS, SDCC, etc. + +config SC_GCC_7280 + tristate "SC7280 Global Clock Controller" + select QCOM_GDSC + depends on COMMON_CLK_QCOM + help + Support for the global clock controller on SC7280 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + I2C, USB, UFS, SDCC, PCIe etc. + +config SC_GCC_8180X + tristate "SC8180X Global Clock Controller" + select QCOM_GDSC + depends on COMMON_CLK_QCOM + help + Support for the global clock controller on SC8180X devices. + Say Y if you want to use peripheral devices such as UART, SPI, + I2C, USB, UFS, SDCC, etc. + +config SC_GPUCC_7180 + tristate "SC7180 Graphics Clock Controller" + select SC_GCC_7180 + help + Support for the graphics clock controller on SC7180 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SC_GPUCC_7280 + tristate "SC7280 Graphics Clock Controller" + select SC_GCC_7280 + help + Support for the graphics clock controller on SC7280 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SC_LPASSCC_7280 + tristate "SC7280 Low Power Audio Subsystem (LPASS) Clock Controller" + select SC_GCC_7280 + help + Support for the LPASS clock controller on SC7280 devices. + Say Y if you want to use the LPASS branch clocks of the LPASS clock + controller to reset the LPASS subsystem. + +config SC_LPASS_CORECC_7180 + tristate "SC7180 LPASS Core Clock Controller" + select SC_GCC_7180 + help + Support for the LPASS(Low Power Audio Subsystem) core clock controller + on SC7180 devices. + Say Y if you want to use LPASS clocks and power domains of the LPASS + core clock controller. + +config SC_MSS_7180 + tristate "SC7180 Modem Clock Controller" + select SC_GCC_7180 + help + Support for the Modem Subsystem clock controller on Qualcomm + Technologies, Inc on SC7180 devices. + Say Y if you want to use the Modem branch clocks of the Modem + subsystem clock controller to reset the MSS subsystem. + +config SC_VIDEOCC_7180 + tristate "SC7180 Video Clock Controller" + select SC_GCC_7180 + help + Support for the video clock controller on SC7180 devices. + Say Y if you want to support video devices and functionality such as + video encode and decode. + +config SC_VIDEOCC_7280 + tristate "SC7280 Video Clock Controller" + select SC_GCC_7280 + help + Support for the video clock controller on SC7280 devices. + Say Y if you want to support video devices and functionality such as + video encode and decode. + +config SDM_CAMCC_845 + tristate "SDM845 Camera Clock Controller" + select SDM_GCC_845 + help + Support for the camera clock controller on SDM845 devices. + Say Y if you want to support camera devices and camera functionality. + +config SDM_GCC_660 + tristate "SDM660 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SDM660 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2C, USB, UFS, SDDC, PCIe, etc. + +config SDM_MMCC_660 + tristate "SDM660 Multimedia Clock Controller" + select SDM_GCC_660 + select QCOM_GDSC + help + Support for the multimedia clock controller on SDM660 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config SDM_GPUCC_660 + tristate "SDM660 Graphics Clock Controller" + select SDM_GCC_660 + select QCOM_GDSC + help + Support for the graphics clock controller on SDM630/636/660 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics + +config QCS_TURING_404 + tristate "QCS404 Turing Clock Controller" + help + Support for the Turing Clock Controller on QCS404, provides clocks + and resets for the Turing subsystem. + +config QCS_Q6SSTOP_404 + tristate "QCS404 Q6SSTOP Clock Controller" + select QCS_GCC_404 + help + Support for the Q6SSTOP clock controller on QCS404 devices. + Say Y if you want to use the Q6SSTOP branch clocks of the WCSS clock + controller to reset the Q6SSTOP subsystem. + +config SDM_GCC_845 + tristate "SDM845 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SDM845 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2C, USB, UFS, SDDC, PCIe, etc. + +config SDM_GPUCC_845 + tristate "SDM845 Graphics Clock Controller" + select SDM_GCC_845 + help + Support for the graphics clock controller on SDM845 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SDM_VIDEOCC_845 + tristate "SDM845 Video Clock Controller" + select SDM_GCC_845 + select QCOM_GDSC + help + Support for the video clock controller on SDM845 devices. + Say Y if you want to support video devices and functionality such as + video encode and decode. + +config SDM_DISPCC_845 + tristate "SDM845 Display Clock Controller" + select SDM_GCC_845 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SDM845 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config SDM_LPASSCC_845 + tristate "SDM845 Low Power Audio Subsystem (LPAAS) Clock Controller" + select SDM_GCC_845 + help + Support for the LPASS clock controller on SDM845 devices. + Say Y if you want to use the LPASS branch clocks of the LPASS clock + controller to reset the LPASS subsystem. + +config SDX_GCC_55 + tristate "SDX55 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SDX55 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SDX_GCC_65 + tristate "SDX65 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SDX65 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_CAMCC_8250 + tristate "SM8250 Camera Clock Controller" + select SM_GCC_8250 + help + Support for the camera clock controller on SM8250 devices. + Say Y if you want to support camera devices and camera functionality. + +<<<<<<< +config SM_CAMCC_8450 + tristate "SM8450 Camera Clock Controller" + select SM_GCC_8450 + help + Support for the camera clock controller on SM8450 devices. + Say Y if you want to support camera devices and camera functionality. +======= +config SM_DISPCC_6125 + tristate "SM6125 Display Clock Controller" + depends on SM_GCC_6125 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SM6125 devices. + Say Y if you want to support display devices and functionality such as + splash screen +>>>>>>> + +config SM_DISPCC_8250 + tristate "SM8150 and SM8250 Display Clock Controller" + depends on SM_GCC_8150 || SM_GCC_8250 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SM8150 and SM8250 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config SM_DISPCC_6350 + tristate "SM6350 Display Clock Controller" + depends on SM_GCC_6350 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SM6350 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config SM_GCC_6115 + tristate "SM6115 and SM4250 Global Clock Controller" + help + Support for the global clock controller on SM6115 and SM4250 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2C, USB, UFS, SDDC, PCIe, etc. + +config SM_GCC_6125 + tristate "SM6125 Global Clock Controller" + help + Support for the global clock controller on SM6125 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GCC_6350 + tristate "SM6350 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SM6350 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GCC_8150 + tristate "SM8150 Global Clock Controller" + help + Support for the global clock controller on SM8150 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GCC_8250 + tristate "SM8250 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SM8250 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GCC_8350 + tristate "SM8350 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SM8350 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GCC_8450 + tristate "SM8450 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SM8450 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GPUCC_6350 + tristate "SM6350 Graphics Clock Controller" + select SM_GCC_6350 + help + Support for the graphics clock controller on SM6350 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SM_GPUCC_8150 + tristate "SM8150 Graphics Clock Controller" + select SM_GCC_8150 + help + Support for the graphics clock controller on SM8150 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SM_GPUCC_8250 + tristate "SM8250 Graphics Clock Controller" + select SM_GCC_8250 + help + Support for the graphics clock controller on SM8250 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SM_VIDEOCC_8150 + tristate "SM8150 Video Clock Controller" + select SM_GCC_8150 + select QCOM_GDSC + help + Support for the video clock controller on SM8150 devices. + Say Y if you want to support video devices and functionality such as + video encode and decode. + +config SM_VIDEOCC_8250 + tristate "SM8250 Video Clock Controller" + select SM_GCC_8250 + select QCOM_GDSC + help + Support for the video clock controller on SM8250 devices. + Say Y if you want to support video devices and functionality such as + video encode and decode. + +config SPMI_PMIC_CLKDIV + tristate "SPMI PMIC clkdiv Support" + depends on SPMI || COMPILE_TEST + help + This driver supports the clkdiv functionality on the Qualcomm + Technologies, Inc. SPMI PMIC. It configures the frequency of + clkdiv outputs of the PMIC. These clocks are typically wired + through alternate functions on GPIO pins. + +config QCOM_HFPLL + tristate "High-Frequency PLL (HFPLL) Clock Controller" + help + Support for the high-frequency PLLs present on Qualcomm devices. + Say Y if you want to support CPU frequency scaling on devices + such as MSM8974, APQ8084, etc. + +config KPSS_XCC + tristate "KPSS Clock Controller" + help + Support for the Krait ACC and GCC clock controllers. Say Y + if you want to support CPU frequency scaling on devices such + as MSM8960, APQ8064, etc. + +config KRAITCC + tristate "Krait Clock Controller" + depends on ARM + select KRAIT_CLOCKS + help + Support for the Krait CPU clocks on Qualcomm devices. + Say Y if you want to support CPU frequency scaling. + +config CLK_GFM_LPASS_SM8250 + tristate "SM8250 GFM LPASS Clocks" + help + Support for the Glitch Free Mux (GFM) Low power audio + subsystem (LPASS) clocks found on SM8250 SoCs. + +endif diff --git a/rr-cache/8ed02688968fb525a88d9a3c6be72cbdc03fe88a/thisimage b/rr-cache/8ed02688968fb525a88d9a3c6be72cbdc03fe88a/thisimage index 19d4b40..5442415 100644 --- a/rr-cache/8ed02688968fb525a88d9a3c6be72cbdc03fe88a/thisimage +++ b/rr-cache/8ed02688968fb525a88d9a3c6be72cbdc03fe88a/thisimage @@ -425,6 +425,10 @@ status = "okay"; }; +&gpi_dma0 { + status = "okay"; +}; + &gpu { status = "okay"; zap-shader { @@ -1139,7 +1143,6 @@ port@0 { reg = <0>; csiphy0_ep: endpoint { - clock-lanes = <7>; data-lanes = <0 1 2 3>; remote-endpoint = <&ov8856_ep>; }; @@ -1180,7 +1183,6 @@ port { ov8856_ep: endpoint { - clock-lanes = <1>; link-frequencies = /bits/ 64 <360000000 180000000>; data-lanes = <1 2 3 4>; @@ -1225,7 +1227,6 @@ port { ov7251_ep: endpoint { - clock-lanes = <1>; data-lanes = <0 1>; // remote-endpoint = <&csiphy3_ep>; }; diff --git a/rr-cache/974706bbaaf4e5896a4bcc2f3e72e8335ce0d1dd/thisimage b/rr-cache/974706bbaaf4e5896a4bcc2f3e72e8335ce0d1dd/thisimage index f1289f3..01fd0cc 100644 --- a/rr-cache/974706bbaaf4e5896a4bcc2f3e72e8335ce0d1dd/thisimage +++ b/rr-cache/974706bbaaf4e5896a4bcc2f3e72e8335ce0d1dd/thisimage @@ -61,6 +61,7 @@ Required properties: "qcom,pm8916", "qcom,pm8941", "qcom,pm8950", + "qcom,pm8953", "qcom,pm8994", "qcom,pm8998", "qcom,pma8084", diff --git a/rr-cache/9a11bb9d0aee8e2b21835affb17471cbe026fdba/thisimage b/rr-cache/9a11bb9d0aee8e2b21835affb17471cbe026fdba/thisimage index 336fda5..4859b46 100644 --- a/rr-cache/9a11bb9d0aee8e2b21835affb17471cbe026fdba/thisimage +++ b/rr-cache/9a11bb9d0aee8e2b21835affb17471cbe026fdba/thisimage @@ -59,6 +59,7 @@ obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o obj-$(CONFIG_QCOM_CLK_RPMH) += clk-rpmh.o obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o obj-$(CONFIG_QCM_GCC_2290) += gcc-qcm2290.o +obj-$(CONFIG_QCM_DISPCC_2290) += dispcc-qcm2290.o obj-$(CONFIG_QCS_GCC_404) += gcc-qcs404.o obj-$(CONFIG_QCS_Q6SSTOP_404) += q6sstop-qcs404.o obj-$(CONFIG_QCS_TURING_404) += turingcc-qcs404.o @@ -86,8 +87,10 @@ obj-$(CONFIG_SDM_GPUCC_845) += gpucc-sdm845.o obj-$(CONFIG_SDM_LPASSCC_845) += lpasscc-sdm845.o obj-$(CONFIG_SDM_VIDEOCC_845) += videocc-sdm845.o obj-$(CONFIG_SDX_GCC_55) += gcc-sdx55.o -obj-$(CONFIG_SM_CAMCC_8250) += camcc-sm8250.o obj-$(CONFIG_SDX_GCC_65) += gcc-sdx65.o +obj-$(CONFIG_SM_CAMCC_8250) += camcc-sm8250.o +obj-$(CONFIG_SM_DISPCC_6125) += dispcc-sm6125.o +obj-$(CONFIG_SM_DISPCC_6350) += dispcc-sm6350.o obj-$(CONFIG_SM_DISPCC_8250) += dispcc-sm8250.o obj-$(CONFIG_SM_GCC_6115) += gcc-sm6115.o obj-$(CONFIG_SM_GCC_6125) += gcc-sm6125.o @@ -96,6 +99,7 @@ obj-$(CONFIG_SM_GCC_8150) += gcc-sm8150.o obj-$(CONFIG_SM_GCC_8250) += gcc-sm8250.o obj-$(CONFIG_SM_GCC_8350) += gcc-sm8350.o obj-$(CONFIG_SM_GCC_8450) += gcc-sm8450.o +obj-$(CONFIG_SM_GPUCC_6350) += gpucc-sm6350.o obj-$(CONFIG_SM_GPUCC_8150) += gpucc-sm8150.o obj-$(CONFIG_SM_GPUCC_8250) += gpucc-sm8250.o obj-$(CONFIG_SM_VIDEOCC_8150) += videocc-sm8150.o diff --git a/rr-cache/b012cdb52162daf746bef83d824b648ac42cabc0/postimage b/rr-cache/b012cdb52162daf746bef83d824b648ac42cabc0/postimage new file mode 100644 index 0000000..58fb96d --- /dev/null +++ b/rr-cache/b012cdb52162daf746bef83d824b648ac42cabc0/postimage @@ -0,0 +1,1325 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_AUDIT=y +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BPF_SYSCALL=y +CONFIG_BPF_JIT=y +CONFIG_PREEMPT=y +CONFIG_IRQ_TIME_ACCOUNTING=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_NUMA_BALANCING=y +CONFIG_MEMCG=y +CONFIG_BLK_CGROUP=y +CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_HUGETLB=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_PERF=y +CONFIG_CGROUP_BPF=y +CONFIG_USER_NS=y +CONFIG_SCHED_AUTOGROUP=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_COMPAT_BRK is not set +CONFIG_PROFILING=y +CONFIG_ARCH_ACTIONS=y +CONFIG_ARCH_SUNXI=y +CONFIG_ARCH_ALPINE=y +CONFIG_ARCH_APPLE=y +CONFIG_ARCH_BCM2835=y +CONFIG_ARCH_BCM4908=y +CONFIG_ARCH_BCM_IPROC=y +CONFIG_ARCH_BERLIN=y +CONFIG_ARCH_BRCMSTB=y +CONFIG_ARCH_EXYNOS=y +CONFIG_ARCH_K3=y +CONFIG_ARCH_LAYERSCAPE=y +CONFIG_ARCH_LG1K=y +CONFIG_ARCH_HISI=y +CONFIG_ARCH_KEEMBAY=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_ARCH_MESON=y +CONFIG_ARCH_MVEBU=y +CONFIG_ARCH_MXC=y +CONFIG_ARCH_QCOM=y +CONFIG_ARCH_RENESAS=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_ARCH_S32=y +CONFIG_ARCH_SEATTLE=y +CONFIG_ARCH_INTEL_SOCFPGA=y +CONFIG_ARCH_SYNQUACER=y +CONFIG_ARCH_TEGRA=y +CONFIG_ARCH_TESLA_FSD=y +CONFIG_ARCH_SPRD=y +CONFIG_ARCH_THUNDER=y +CONFIG_ARCH_THUNDER2=y +CONFIG_ARCH_UNIPHIER=y +CONFIG_ARCH_VEXPRESS=y +CONFIG_ARCH_VISCONTI=y +CONFIG_ARCH_XGENE=y +CONFIG_ARCH_ZYNQMP=y +CONFIG_ARM64_VA_BITS_48=y +CONFIG_SCHED_MC=y +CONFIG_SCHED_SMT=y +CONFIG_NUMA=y +CONFIG_KEXEC=y +CONFIG_KEXEC_FILE=y +CONFIG_CRASH_DUMP=y +CONFIG_XEN=y +CONFIG_COMPAT=y +CONFIG_RANDOMIZE_BASE=y +CONFIG_HIBERNATION=y +CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y +CONFIG_ENERGY_MODEL=y +CONFIG_ARM_CPUIDLE=y +CONFIG_ARM_PSCI_CPUIDLE=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=m +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m +CONFIG_CPUFREQ_DT=y +CONFIG_ACPI_CPPC_CPUFREQ=m +CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=m +CONFIG_ARM_ARMADA_37XX_CPUFREQ=y +CONFIG_ARM_SCPI_CPUFREQ=y +CONFIG_ARM_IMX_CPUFREQ_DT=m +CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y +CONFIG_ARM_QCOM_CPUFREQ_HW=y +CONFIG_ARM_RASPBERRYPI_CPUFREQ=m +CONFIG_ARM_SCMI_CPUFREQ=y +CONFIG_ARM_TEGRA186_CPUFREQ=y +CONFIG_ARM_MEDIATEK_CPUFREQ=y +CONFIG_QORIQ_CPUFREQ=y +CONFIG_ACPI=y +CONFIG_ACPI_APEI=y +CONFIG_ACPI_APEI_GHES=y +CONFIG_ACPI_APEI_PCIEAER=y +CONFIG_ACPI_APEI_MEMORY_FAILURE=y +CONFIG_ACPI_APEI_EINJ=y +CONFIG_VIRTUALIZATION=y +CONFIG_KVM=y +CONFIG_ARM64_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM64_CE=y +CONFIG_CRYPTO_SHA2_ARM64_CE=y +CONFIG_CRYPTO_SHA512_ARM64_CE=m +CONFIG_CRYPTO_SHA3_ARM64=m +CONFIG_CRYPTO_SM3_ARM64_CE=m +CONFIG_CRYPTO_GHASH_ARM64_CE=y +CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m +CONFIG_CRYPTO_AES_ARM64_CE_CCM=y +CONFIG_CRYPTO_AES_ARM64_CE_BLK=y +CONFIG_CRYPTO_CHACHA20_NEON=m +CONFIG_CRYPTO_AES_ARM64_BS=m +CONFIG_JUMP_LABEL=y +CONFIG_SECCOMP=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_BLK_INLINE_ENCRYPTION=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_KSM=y +CONFIG_MEMORY_FAILURE=y +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IPV6=m +CONFIG_NETFILTER=y +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +CONFIG_NETFILTER_XT_TARGET_LOG=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_NAT=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_BRIDGE=m +CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_NET_DSA=m +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_VLAN_8021Q_MVRP=y +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CBS=m +CONFIG_NET_SCH_ETF=m +CONFIG_NET_SCH_TAPRIO=m +CONFIG_NET_SCH_MQPRIO=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_FLOWER=m +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_GACT=m +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_GATE=m +CONFIG_QRTR=m +CONFIG_QRTR_SMD=m +CONFIG_QRTR_TUN=m +CONFIG_CAN=m +CONFIG_CAN_FLEXCAN=m +CONFIG_CAN_RCAR=m +CONFIG_CAN_RCAR_CANFD=m +CONFIG_CAN_MCP251XFD=m +CONFIG_BT=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m +# CONFIG_BT_LE is not set +CONFIG_BT_LEDS=y +# CONFIG_BT_DEBUGFS is not set +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTSDIO=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIUART_3WIRE=y +CONFIG_BT_HCIUART_BCM=y +CONFIG_BT_HCIUART_QCA=y +CONFIG_BT_HCIUART_MRVL=y +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m +CONFIG_BT_QCOMSMD=m +CONFIG_CFG80211=m +CONFIG_CFG80211_WEXT=y +CONFIG_MAC80211=m +CONFIG_MAC80211_LEDS=y +CONFIG_RFKILL=y +CONFIG_NET_9P=y +CONFIG_NET_9P_VIRTIO=y +CONFIG_NFC=m +CONFIG_NFC_NCI=m +CONFIG_NFC_S3FWRN5_I2C=m +CONFIG_PCI=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIEAER=y +CONFIG_PCI_IOV=y +CONFIG_PCI_PASID=y +CONFIG_HOTPLUG_PCI=y +CONFIG_HOTPLUG_PCI_ACPI=y +CONFIG_PCI_AARDVARK=y +CONFIG_PCI_TEGRA=y +CONFIG_PCIE_RCAR_HOST=y +CONFIG_PCIE_RCAR_EP=y +CONFIG_PCI_HOST_GENERIC=y +CONFIG_PCI_XGENE=y +CONFIG_PCIE_ALTERA=y +CONFIG_PCIE_ALTERA_MSI=y +CONFIG_PCI_HOST_THUNDER_PEM=y +CONFIG_PCI_HOST_THUNDER_ECAM=y +CONFIG_PCIE_ROCKCHIP_HOST=m +CONFIG_PCIE_BRCMSTB=m +CONFIG_PCI_IMX6=y +CONFIG_PCI_LAYERSCAPE=y +CONFIG_PCI_HISI=y +CONFIG_PCIE_QCOM=y +CONFIG_PCIE_ARMADA_8K=y +CONFIG_PCIE_KIRIN=y +CONFIG_PCIE_HISI_STB=y +CONFIG_PCIE_TEGRA194_HOST=m +CONFIG_PCIE_VISCONTI_HOST=y +CONFIG_PCIE_LAYERSCAPE_GEN4=y +CONFIG_PCI_ENDPOINT=y +CONFIG_PCI_ENDPOINT_CONFIGFS=y +CONFIG_PCI_EPF_TEST=m +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_FW_LOADER_USER_HELPER=y +CONFIG_HISILICON_LPC=y +CONFIG_TEGRA_ACONNECT=m +CONFIG_ARM_SCMI_PROTOCOL=y +CONFIG_ARM_SCPI_PROTOCOL=y +CONFIG_RASPBERRYPI_FIRMWARE=y +CONFIG_INTEL_STRATIX10_SERVICE=y +CONFIG_INTEL_STRATIX10_RSU=m +CONFIG_EFI_CAPSULE_LOADER=y +CONFIG_IMX_SCU=y +CONFIG_IMX_SCU_PD=y +CONFIG_GNSS=m +CONFIG_GNSS_MTK_SERIAL=m +CONFIG_MTD=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_SST25L=y +CONFIG_MTD_RAW_NAND=y +CONFIG_MTD_NAND_BRCMNAND=m +CONFIG_MTD_NAND_DENALI_DT=y +CONFIG_MTD_NAND_MARVELL=y +CONFIG_MTD_NAND_FSL_IFC=y +CONFIG_MTD_NAND_QCOM=y +CONFIG_MTD_SPI_NOR=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_NBD=m +CONFIG_VIRTIO_BLK=y +CONFIG_BLK_DEV_NVME=m +CONFIG_QCOM_COINCELL=m +CONFIG_QCOM_FASTRPC=m +CONFIG_SRAM=y +CONFIG_PCI_ENDPOINT_TEST=m +CONFIG_EEPROM_AT24=m +CONFIG_EEPROM_AT25=m +CONFIG_UACCE=m +# CONFIG_SCSI_PROC_FS is not set +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_SAS_ATA=y +CONFIG_SCSI_HISI_SAS=y +CONFIG_SCSI_HISI_SAS_PCI=y +CONFIG_MEGARAID_SAS=y +CONFIG_SCSI_MPT3SAS=m +CONFIG_SCSI_UFSHCD=y +CONFIG_SCSI_UFSHCD_PLATFORM=y +CONFIG_SCSI_UFS_QCOM=y +CONFIG_SCSI_UFS_HISI=y +CONFIG_SCSI_UFS_EXYNOS=y +CONFIG_SCSI_UFS_CRYPTO=y +CONFIG_ATA=y +CONFIG_SATA_AHCI=y +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_AHCI_BRCM=m +CONFIG_AHCI_CEVA=y +CONFIG_AHCI_MVEBU=y +CONFIG_AHCI_XGENE=y +CONFIG_AHCI_QORIQ=y +CONFIG_SATA_SIL24=y +CONFIG_SATA_RCAR=y +CONFIG_PATA_PLATFORM=y +CONFIG_PATA_OF_PLATFORM=y +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_BLK_DEV_DM=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_NETDEVICES=y +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +CONFIG_TUN=y +CONFIG_VETH=m +CONFIG_VIRTIO_NET=y +CONFIG_NET_DSA_BCM_SF2=m +CONFIG_NET_DSA_MSCC_FELIX=m +CONFIG_AMD_XGBE=y +CONFIG_NET_XGENE=y +CONFIG_ATL1C=m +CONFIG_BCMGENET=m +CONFIG_SYSTEMPORT=m +CONFIG_BNX2X=m +CONFIG_MACB=y +CONFIG_THUNDER_NIC_PF=y +CONFIG_FEC=y +CONFIG_FSL_FMAN=y +CONFIG_FSL_DPAA_ETH=y +CONFIG_FSL_DPAA2_ETH=y +CONFIG_FSL_ENETC=y +CONFIG_FSL_ENETC_VF=y +CONFIG_FSL_ENETC_QOS=y +CONFIG_HIX5HD2_GMAC=y +CONFIG_HNS_DSAF=y +CONFIG_HNS_ENET=y +CONFIG_HNS3=y +CONFIG_HNS3_HCLGE=y +CONFIG_HNS3_ENET=y +CONFIG_E1000=y +CONFIG_E1000E=y +CONFIG_IGB=y +CONFIG_IGBVF=y +CONFIG_MVNETA=y +CONFIG_MVPP2=y +CONFIG_SKY2=y +CONFIG_MLX4_EN=m +CONFIG_MLX5_CORE=m +CONFIG_MLX5_CORE_EN=y +CONFIG_QCOM_EMAC=m +CONFIG_RMNET=m +CONFIG_R8169=m +CONFIG_SH_ETH=y +CONFIG_RAVB=y +CONFIG_SMC91X=y +CONFIG_SMSC911X=y +CONFIG_SNI_AVE=y +CONFIG_SNI_NETSEC=y +CONFIG_STMMAC_ETH=m +CONFIG_TI_K3_AM65_CPSW_NUSS=y +CONFIG_QCOM_IPA=m +CONFIG_MESON_GXL_PHY=m +CONFIG_AQUANTIA_PHY=y +CONFIG_BCM54140_PHY=m +CONFIG_MARVELL_PHY=m +CONFIG_MARVELL_10G_PHY=m +CONFIG_MICREL_PHY=y +CONFIG_MICROSEMI_PHY=y +CONFIG_AT803X_PHY=y +CONFIG_REALTEK_PHY=y +CONFIG_ROCKCHIP_PHY=y +CONFIG_DP83867_PHY=y +CONFIG_VITESSE_PHY=y +CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y +CONFIG_MDIO_BUS_MUX_MMIOREG=y +CONFIG_USB_BRCMSTB=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_RTL8152=m +CONFIG_USB_LAN78XX=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_SR9800=m +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_ATH10K=m +CONFIG_ATH10K_PCI=m +CONFIG_ATH10K_SNOC=m +CONFIG_WCN36XX=m +CONFIG_ATH11K=m +CONFIG_ATH11K_AHB=m +CONFIG_ATH11K_PCI=m +CONFIG_BRCMFMAC=m +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_MWIFIEX_PCIE=m +CONFIG_WL18XX=m +CONFIG_WLCORE_SDIO=m +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_ADC=m +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_SNVS_PWRKEY=m +CONFIG_KEYBOARD_IMX_SC_KEY=m +CONFIG_KEYBOARD_CROS_EC=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ATMEL_MXT=m +CONFIG_TOUCHSCREEN_GOODIX=m +CONFIG_TOUCHSCREEN_EDT_FT5X06=m +CONFIG_INPUT_MISC=y +CONFIG_INPUT_PM8941_PWRKEY=y +CONFIG_INPUT_PM8XXX_VIBRATOR=m +CONFIG_INPUT_PWM_BEEPER=m +CONFIG_INPUT_PWM_VIBRA=m +CONFIG_INPUT_HISI_POWERKEY=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y +CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_BCM2835AUX=y +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_8250_OMAP=y +CONFIG_SERIAL_8250_MT6577=y +CONFIG_SERIAL_8250_UNIPHIER=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_MESON=y +CONFIG_SERIAL_MESON_CONSOLE=y +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_TEGRA=y +CONFIG_SERIAL_TEGRA_TCU=y +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_MSM=y +CONFIG_SERIAL_MSM_CONSOLE=y +CONFIG_SERIAL_QCOM_GENI=y +CONFIG_SERIAL_QCOM_GENI_CONSOLE=y +CONFIG_SERIAL_XILINX_PS_UART=y +CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y +CONFIG_SERIAL_FSL_LPUART=y +CONFIG_SERIAL_FSL_LPUART_CONSOLE=y +CONFIG_SERIAL_FSL_LINFLEXUART=y +CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE=y +CONFIG_SERIAL_MVEBU_UART=y +CONFIG_SERIAL_OWL=y +CONFIG_SERIAL_DEV_BUS=y +CONFIG_VIRTIO_CONSOLE=y +CONFIG_IPMI_HANDLER=m +CONFIG_IPMI_DEVICE_INTERFACE=m +CONFIG_IPMI_SI=m +CONFIG_TCG_TPM=y +CONFIG_TCG_TIS_I2C_INFINEON=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_I2C_BCM2835=m +CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_I2C_GPIO=m +CONFIG_I2C_IMX=y +CONFIG_I2C_IMX_LPI2C=y +CONFIG_I2C_MESON=y +CONFIG_I2C_MT65XX=y +CONFIG_I2C_MV64XXX=y +CONFIG_I2C_OMAP=y +CONFIG_I2C_OWL=y +CONFIG_I2C_PXA=y +CONFIG_I2C_QCOM_CCI=m +CONFIG_I2C_QCOM_GENI=m +CONFIG_I2C_QUP=y +CONFIG_I2C_RIIC=y +CONFIG_I2C_RK3X=y +CONFIG_I2C_S3C2410=y +CONFIG_I2C_SH_MOBILE=y +CONFIG_I2C_TEGRA=y +CONFIG_I2C_UNIPHIER_F=y +CONFIG_I2C_RCAR=y +CONFIG_I2C_CROS_EC_TUNNEL=y +CONFIG_SPI=y +CONFIG_SPI_ARMADA_3700=y +CONFIG_SPI_BCM2835=m +CONFIG_SPI_BCM2835AUX=m +CONFIG_SPI_CADENCE_QUADSPI=y +CONFIG_SPI_DESIGNWARE=m +CONFIG_SPI_DW_DMA=y +CONFIG_SPI_DW_MMIO=m +CONFIG_SPI_FSL_LPSPI=y +CONFIG_SPI_FSL_QUADSPI=y +CONFIG_SPI_NXP_FLEXSPI=y +CONFIG_SPI_IMX=m +CONFIG_SPI_FSL_DSPI=y +CONFIG_SPI_MESON_SPICC=m +CONFIG_SPI_MESON_SPIFC=m +CONFIG_SPI_ORION=y +CONFIG_SPI_PL022=y +CONFIG_SPI_ROCKCHIP=y +CONFIG_SPI_RPCIF=m +CONFIG_SPI_RSPI=m +CONFIG_SPI_QCOM_QSPI=m +CONFIG_SPI_QUP=y +CONFIG_SPI_QCOM_GENI=m +CONFIG_SPI_S3C64XX=y +CONFIG_SPI_SH_MSIOF=m +CONFIG_SPI_SUN6I=y +CONFIG_SPI_SPIDEV=m +CONFIG_SPMI=y +CONFIG_PINCTRL_MAX77620=y +CONFIG_PINCTRL_SINGLE=y +CONFIG_PINCTRL_OWL=y +CONFIG_PINCTRL_S700=y +CONFIG_PINCTRL_S900=y +CONFIG_PINCTRL_IMX8MM=y +CONFIG_PINCTRL_IMX8MN=y +CONFIG_PINCTRL_IMX8MP=y +CONFIG_PINCTRL_IMX8MQ=y +CONFIG_PINCTRL_IMX8QM=y +CONFIG_PINCTRL_IMX8QXP=y +CONFIG_PINCTRL_IMX8DXL=y +CONFIG_PINCTRL_IMX8ULP=y +CONFIG_PINCTRL_MSM=y +CONFIG_PINCTRL_IPQ8074=y +CONFIG_PINCTRL_IPQ6018=y +CONFIG_PINCTRL_MSM8916=y +CONFIG_PINCTRL_MSM8994=y +CONFIG_PINCTRL_MSM8996=y +CONFIG_PINCTRL_MSM8998=y +CONFIG_PINCTRL_QCS404=y +CONFIG_PINCTRL_QDF2XXX=y +CONFIG_PINCTRL_QCOM_SPMI_PMIC=y +CONFIG_PINCTRL_SC7180=y +CONFIG_PINCTRL_SC7280=y +CONFIG_PINCTRL_SDM845=y +CONFIG_PINCTRL_SM8150=y +CONFIG_PINCTRL_SM8250=y +CONFIG_PINCTRL_SM8350=y +CONFIG_PINCTRL_SM8450=y +CONFIG_PINCTRL_LPASS_LPI=m +CONFIG_GPIO_ALTERA=m +CONFIG_GPIO_DAVINCI=y +CONFIG_GPIO_DWAPB=y +CONFIG_GPIO_MB86S7X=y +CONFIG_GPIO_MPC8XXX=y +CONFIG_GPIO_MXC=y +CONFIG_GPIO_PL061=y +CONFIG_GPIO_RCAR=y +CONFIG_GPIO_UNIPHIER=y +CONFIG_GPIO_VISCONTI=y +CONFIG_GPIO_WCD934X=m +CONFIG_GPIO_XGENE=y +CONFIG_GPIO_XGENE_SB=y +CONFIG_GPIO_MAX732X=y +CONFIG_GPIO_PCA953X=y +CONFIG_GPIO_PCA953X_IRQ=y +CONFIG_GPIO_BD9571MWV=m +CONFIG_GPIO_MAX77620=y +CONFIG_GPIO_SL28CPLD=m +CONFIG_POWER_RESET_MSM=y +CONFIG_POWER_RESET_QCOM_PON=m +CONFIG_POWER_RESET_XGENE=y +CONFIG_POWER_RESET_SYSCON=y +CONFIG_SYSCON_REBOOT_MODE=y +CONFIG_BATTERY_SBS=m +CONFIG_BATTERY_BQ27XXX=y +CONFIG_BATTERY_MAX17042=m +CONFIG_CHARGER_BQ25890=m +CONFIG_CHARGER_BQ25980=m +CONFIG_SENSORS_ARM_SCMI=y +CONFIG_SENSORS_ARM_SCPI=y +CONFIG_SENSORS_JC42=m +CONFIG_SENSORS_LM75=m +CONFIG_SENSORS_LM90=m +CONFIG_SENSORS_PWM_FAN=m +CONFIG_SENSORS_RASPBERRYPI_HWMON=m +CONFIG_SENSORS_SL28CPLD=m +CONFIG_SENSORS_INA2XX=m +CONFIG_SENSORS_INA3221=m +CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y +CONFIG_CPU_THERMAL=y +CONFIG_THERMAL_EMULATION=y +CONFIG_IMX_SC_THERMAL=m +CONFIG_IMX8MM_THERMAL=m +CONFIG_QORIQ_THERMAL=m +CONFIG_SUN8I_THERMAL=y +CONFIG_ROCKCHIP_THERMAL=m +CONFIG_RCAR_THERMAL=y +CONFIG_RCAR_GEN3_THERMAL=y +CONFIG_RZG2L_THERMAL=y +CONFIG_ARMADA_THERMAL=y +CONFIG_BCM2711_THERMAL=m +CONFIG_BCM2835_THERMAL=m +CONFIG_BRCMSTB_THERMAL=m +CONFIG_EXYNOS_THERMAL=y +CONFIG_TEGRA_SOCTHERM=m +CONFIG_TEGRA_BPMP_THERMAL=m +CONFIG_QCOM_TSENS=y +CONFIG_QCOM_SPMI_TEMP_ALARM=m +CONFIG_QCOM_LMH=m +CONFIG_QCOM_SPMI_ADC_TM5=m +CONFIG_UNIPHIER_THERMAL=y +CONFIG_WATCHDOG=y +CONFIG_SL28CPLD_WATCHDOG=m +CONFIG_PM8916_WATCHDOG=y +CONFIG_ARM_SP805_WATCHDOG=y +CONFIG_ARM_SBSA_WATCHDOG=y +CONFIG_S3C2410_WATCHDOG=y +CONFIG_BCM7038_WDT=m +CONFIG_DW_WATCHDOG=y +CONFIG_SUNXI_WATCHDOG=m +CONFIG_IMX2_WDT=y +CONFIG_IMX_SC_WDT=m +CONFIG_QCOM_WDT=m +CONFIG_MESON_GXBB_WATCHDOG=m +CONFIG_MESON_WATCHDOG=m +CONFIG_ARM_SMC_WATCHDOG=y +CONFIG_RENESAS_WDT=y +CONFIG_RENESAS_RZG2LWDT=y +CONFIG_UNIPHIER_WATCHDOG=y +CONFIG_BCM2835_WDT=y +CONFIG_MFD_ALTERA_SYSMGR=y +CONFIG_MFD_BD9571MWV=y +CONFIG_MFD_AXP20X_I2C=y +CONFIG_MFD_AXP20X_RSB=y +CONFIG_MFD_EXYNOS_LPASS=m +CONFIG_MFD_HI6421_PMIC=y +CONFIG_MFD_HI655X_PMIC=y +CONFIG_MFD_MAX77620=y +CONFIG_MFD_MT6397=y +CONFIG_MFD_QCOM_QCA639X=y +CONFIG_MFD_QCOM_RPM=y +CONFIG_MFD_SPMI_PMIC=y +CONFIG_MFD_RK808=y +CONFIG_MFD_SEC_CORE=y +CONFIG_MFD_SL28CPLD=y +CONFIG_MFD_ROHM_BD718XX=y +CONFIG_MFD_WCD934X=m +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_AXP20X=y +CONFIG_REGULATOR_BD718XX=y +CONFIG_REGULATOR_BD9571MWV=y +CONFIG_REGULATOR_FAN53555=y +CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_HI6421V530=y +CONFIG_REGULATOR_HI655X=y +CONFIG_REGULATOR_MAX77620=y +CONFIG_REGULATOR_MAX8973=y +CONFIG_REGULATOR_MP8859=y +CONFIG_REGULATOR_MT6358=y +CONFIG_REGULATOR_MT6397=y +CONFIG_REGULATOR_PCA9450=y +CONFIG_REGULATOR_PF8X00=y +CONFIG_REGULATOR_PFUZE100=y +CONFIG_REGULATOR_PWM=y +CONFIG_REGULATOR_QCOM_RPMH=y +CONFIG_REGULATOR_QCOM_SMD_RPM=y +CONFIG_REGULATOR_QCOM_SPMI=y +CONFIG_REGULATOR_QCOM_USB_VBUS=m +CONFIG_REGULATOR_RK808=y +CONFIG_REGULATOR_S2MPS11=y +CONFIG_REGULATOR_TPS65132=m +CONFIG_REGULATOR_VCTRL=m +CONFIG_RC_CORE=m +CONFIG_RC_DECODERS=y +CONFIG_RC_DEVICES=y +CONFIG_IR_MESON=m +CONFIG_IR_SUNXI=m +CONFIG_MEDIA_SUPPORT=m +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y +CONFIG_MEDIA_SDR_SUPPORT=y +CONFIG_MEDIA_PLATFORM_SUPPORT=y +# CONFIG_DVB_NET is not set +CONFIG_MEDIA_USB_SUPPORT=y +CONFIG_USB_VIDEO_CLASS=m +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_QCOM_CAMSS=m +CONFIG_VIDEO_RCAR_CSI2=m +CONFIG_VIDEO_RCAR_VIN=m +CONFIG_VIDEO_SUN6I_CSI=m +CONFIG_VIDEO_RCAR_ISP=m +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m +CONFIG_VIDEO_SAMSUNG_S5P_MFC=m +CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m +CONFIG_VIDEO_RENESAS_FDP1=m +CONFIG_VIDEO_RENESAS_FCP=m +CONFIG_VIDEO_RENESAS_VSP1=m +CONFIG_VIDEO_QCOM_VENUS=m +CONFIG_SDR_PLATFORM_DRIVERS=y +CONFIG_VIDEO_RCAR_DRIF=m +CONFIG_VIDEO_IMX219=m +CONFIG_VIDEO_OV5640=m +CONFIG_VIDEO_OV5645=m +CONFIG_DRM=m +CONFIG_DRM_I2C_NXP_TDA998X=m +CONFIG_DRM_MALI_DISPLAY=m +CONFIG_DRM_NOUVEAU=m +CONFIG_DRM_EXYNOS=m +CONFIG_DRM_EXYNOS5433_DECON=y +CONFIG_DRM_EXYNOS7_DECON=y +CONFIG_DRM_EXYNOS_DSI=y +# CONFIG_DRM_EXYNOS_DP is not set +CONFIG_DRM_EXYNOS_HDMI=y +CONFIG_DRM_EXYNOS_MIC=y +CONFIG_DRM_ROCKCHIP=m +CONFIG_ROCKCHIP_ANALOGIX_DP=y +CONFIG_ROCKCHIP_CDN_DP=y +CONFIG_ROCKCHIP_DW_HDMI=y +CONFIG_ROCKCHIP_DW_MIPI_DSI=y +CONFIG_ROCKCHIP_INNO_HDMI=y +CONFIG_ROCKCHIP_LVDS=y +CONFIG_DRM_RCAR_DU=m +CONFIG_DRM_RCAR_DW_HDMI=m +CONFIG_DRM_RCAR_MIPI_DSI=m +CONFIG_DRM_SUN4I=m +CONFIG_DRM_SUN6I_DSI=m +CONFIG_DRM_SUN8I_DW_HDMI=m +CONFIG_DRM_SUN8I_MIXER=m +CONFIG_DRM_MSM=m +CONFIG_DRM_TEGRA=m +CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=m +CONFIG_DRM_PANEL_LVDS=m +CONFIG_DRM_PANEL_SIMPLE=m +CONFIG_DRM_PANEL_EDP=m +CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=m +CONFIG_DRM_PANEL_RAYDIUM_RM67191=m +CONFIG_DRM_PANEL_SITRONIX_ST7703=m +CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m +CONFIG_DRM_LONTIUM_LT8912B=m +CONFIG_DRM_LONTIUM_LT9611=m +CONFIG_DRM_LONTIUM_LT9611UXC=m +CONFIG_DRM_NWL_MIPI_DSI=m +CONFIG_DRM_PARADE_PS8640=m +CONFIG_DRM_SII902X=m +CONFIG_DRM_SIMPLE_BRIDGE=m +CONFIG_DRM_THINE_THC63LVD1024=m +CONFIG_DRM_TI_SN65DSI86=m +CONFIG_DRM_I2C_ADV7511=m +CONFIG_DRM_I2C_ADV7511_AUDIO=y +CONFIG_DRM_DW_HDMI_AHB_AUDIO=m +CONFIG_DRM_DW_HDMI_CEC=m +CONFIG_DRM_IMX_DCSS=m +CONFIG_DRM_VC4=m +CONFIG_DRM_ETNAVIV=m +CONFIG_DRM_HISI_HIBMC=m +CONFIG_DRM_HISI_KIRIN=m +CONFIG_DRM_MEDIATEK=m +CONFIG_DRM_MEDIATEK_HDMI=m +CONFIG_DRM_MXSFB=m +CONFIG_DRM_MESON=m +CONFIG_DRM_PL111=m +CONFIG_DRM_LIMA=m +CONFIG_DRM_PANFROST=m +CONFIG_FB=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_EFI=y +CONFIG_BACKLIGHT_PWM=m +CONFIG_BACKLIGHT_LP855X=m +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_HDA_TEGRA=m +CONFIG_SND_HDA_CODEC_HDMI=m +CONFIG_SND_SOC=y +CONFIG_SND_BCM2835_SOC_I2S=m +CONFIG_SND_SOC_FSL_ASRC=m +CONFIG_SND_SOC_FSL_MICFIL=m +CONFIG_SND_SOC_FSL_EASRC=m +CONFIG_SND_IMX_SOC=m +CONFIG_SND_SOC_IMX_SGTL5000=m +CONFIG_SND_SOC_IMX_SPDIF=m +CONFIG_SND_SOC_FSL_ASOC_CARD=m +CONFIG_SND_SOC_IMX_AUDMIX=m +CONFIG_SND_MESON_AXG_SOUND_CARD=m +CONFIG_SND_MESON_GX_SOUND_CARD=m +CONFIG_SND_SOC_QCOM=m +CONFIG_SND_SOC_APQ8016_SBC=m +CONFIG_SND_SOC_MSM8996=m +CONFIG_SND_SOC_QDSP6=m +CONFIG_SND_SOC_SDM845=m +CONFIG_SND_SOC_SM8250=m +CONFIG_SND_SOC_ROCKCHIP=m +CONFIG_SND_SOC_ROCKCHIP_SPDIF=m +CONFIG_SND_SOC_ROCKCHIP_RT5645=m +CONFIG_SND_SOC_RK3399_GRU_SOUND=m +CONFIG_SND_SOC_SAMSUNG=y +CONFIG_SND_SOC_RCAR=m +CONFIG_SND_SOC_RZ=m +CONFIG_SND_SUN4I_I2S=m +CONFIG_SND_SUN4I_SPDIF=m +CONFIG_SND_SOC_TEGRA=m +CONFIG_SND_SOC_TEGRA210_AHUB=m +CONFIG_SND_SOC_TEGRA210_DMIC=m +CONFIG_SND_SOC_TEGRA210_I2S=m +CONFIG_SND_SOC_TEGRA186_DSPK=m +CONFIG_SND_SOC_TEGRA210_ADMAIF=m +CONFIG_SND_SOC_TEGRA210_MVC=m +CONFIG_SND_SOC_TEGRA210_SFC=m +CONFIG_SND_SOC_TEGRA210_AMX=m +CONFIG_SND_SOC_TEGRA210_ADX=m +CONFIG_SND_SOC_TEGRA210_MIXER=m +CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD=m +CONFIG_SND_SOC_AK4613=m +CONFIG_SND_SOC_ES7134=m +CONFIG_SND_SOC_ES7241=m +CONFIG_SND_SOC_GTM601=m +CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m +CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m +CONFIG_SND_SOC_PCM3168A_I2C=m +CONFIG_SND_SOC_RT5659=m +CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m +CONFIG_SND_SOC_SIMPLE_MUX=m +CONFIG_SND_SOC_TAS571X=m +CONFIG_SND_SOC_TLV320AIC32X4_I2C=m +CONFIG_SND_SOC_WCD9335=m +CONFIG_SND_SOC_WCD934X=m +CONFIG_SND_SOC_WM8904=m +CONFIG_SND_SOC_WM8960=m +CONFIG_SND_SOC_WM8962=m +CONFIG_SND_SOC_WM8978=m +CONFIG_SND_SOC_WSA881X=m +CONFIG_SND_SOC_NAU8822=m +CONFIG_SND_SOC_LPASS_WSA_MACRO=m +CONFIG_SND_SOC_LPASS_VA_MACRO=m +CONFIG_SND_SOC_LPASS_RX_MACRO=m +CONFIG_SND_SOC_LPASS_TX_MACRO=m +CONFIG_SND_SIMPLE_CARD=m +CONFIG_SND_AUDIO_GRAPH_CARD=m +CONFIG_SND_AUDIO_GRAPH_CARD2=m +CONFIG_HID_MULTITOUCH=m +CONFIG_I2C_HID_ACPI=m +CONFIG_I2C_HID_OF=m +CONFIG_I2C_HID=m +CONFIG_USB=y +CONFIG_USB_OTG=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PCI_RENESAS=m +CONFIG_USB_XHCI_TEGRA=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_EXYNOS=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_EXYNOS=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_RENESAS_USBHS_HCD=m +CONFIG_USB_RENESAS_USBHS=m +CONFIG_USB_ACM=m +CONFIG_USB_STORAGE=y +CONFIG_USB_CDNS_SUPPORT=m +CONFIG_USB_CDNS3=m +CONFIG_USB_CDNS3_GADGET=y +CONFIG_USB_CDNS3_HOST=y +CONFIG_USB_MTU3=y +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_ULPI=y +CONFIG_USB_DWC2=y +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_ISP1760=y +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_CP210X=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_HSIC_USB3503=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_USB_GADGET=y +CONFIG_USB_RENESAS_USBHS_UDC=m +CONFIG_USB_RENESAS_USB3=m +CONFIG_USB_TEGRA_XUDC=m +CONFIG_USB_CONFIGFS=m +CONFIG_USB_CONFIGFS_SERIAL=y +CONFIG_USB_CONFIGFS_ACM=y +CONFIG_USB_CONFIGFS_OBEX=y +CONFIG_USB_CONFIGFS_NCM=y +CONFIG_USB_CONFIGFS_ECM=y +CONFIG_USB_CONFIGFS_ECM_SUBSET=y +CONFIG_USB_CONFIGFS_RNDIS=y +CONFIG_USB_CONFIGFS_EEM=y +CONFIG_USB_CONFIGFS_MASS_STORAGE=y +CONFIG_USB_CONFIGFS_F_FS=y +CONFIG_TYPEC=y +CONFIG_TYPEC_TCPM=m +CONFIG_TYPEC_TCPCI=m +CONFIG_TYPEC_FUSB302=m +CONFIG_TYPEC_TPS6598X=m +CONFIG_TYPEC_HD3SS3220=m +CONFIG_TYPEC_QCOM_PMIC=m +CONFIG_MMC=y +CONFIG_MMC_BLOCK_MINORS=32 +CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ACPI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_OF_ARASAN=y +CONFIG_MMC_SDHCI_OF_ESDHC=y +CONFIG_MMC_SDHCI_CADENCE=y +CONFIG_MMC_SDHCI_ESDHC_IMX=y +CONFIG_MMC_SDHCI_TEGRA=y +CONFIG_MMC_SDHCI_F_SDH30=y +CONFIG_MMC_MESON_GX=y +CONFIG_MMC_SDHCI_MSM=y +CONFIG_MMC_SPI=y +CONFIG_MMC_SDHI=y +CONFIG_MMC_UNIPHIER=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_EXYNOS=y +CONFIG_MMC_DW_HI3798CV200=y +CONFIG_MMC_DW_K3=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SUNXI=y +CONFIG_MMC_BCM2835=y +CONFIG_MMC_MTK=y +CONFIG_MMC_SDHCI_XENON=y +CONFIG_MMC_SDHCI_AM654=y +CONFIG_MMC_OWL=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_LM3692X=m +CONFIG_LEDS_PCA9532=m +CONFIG_LEDS_CLASS_MULTICOLOR=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_PWM=y +CONFIG_LEDS_QCOM_LPG=y +CONFIG_LEDS_SYSCON=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_DISK=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_LEDS_TRIGGER_PANIC=y +CONFIG_EDAC=y +CONFIG_EDAC_GHES=y +CONFIG_EDAC_LAYERSCAPE=m +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1307=m +CONFIG_RTC_DRV_HYM8563=m +CONFIG_RTC_DRV_MAX77686=y +CONFIG_RTC_DRV_RK808=m +CONFIG_RTC_DRV_PCF85063=m +CONFIG_RTC_DRV_PCF85363=m +CONFIG_RTC_DRV_M41T80=m +CONFIG_RTC_DRV_RX8581=m +CONFIG_RTC_DRV_RV3028=m +CONFIG_RTC_DRV_RV8803=m +CONFIG_RTC_DRV_S5M=y +CONFIG_RTC_DRV_DS3232=y +CONFIG_RTC_DRV_PCF2127=m +CONFIG_RTC_DRV_EFI=y +CONFIG_RTC_DRV_CROS_EC=y +CONFIG_RTC_DRV_FSL_FTM_ALARM=m +CONFIG_RTC_DRV_S3C=y +CONFIG_RTC_DRV_PL031=y +CONFIG_RTC_DRV_SUN6I=y +CONFIG_RTC_DRV_ARMADA38X=y +CONFIG_RTC_DRV_PM8XXX=m +CONFIG_RTC_DRV_TEGRA=y +CONFIG_RTC_DRV_SNVS=m +CONFIG_RTC_DRV_IMX_SC=m +CONFIG_RTC_DRV_XGENE=y +CONFIG_RTC_DRV_MT6397=m +CONFIG_DMADEVICES=y +CONFIG_DMA_BCM2835=y +CONFIG_DMA_SUN6I=m +CONFIG_FSL_EDMA=y +CONFIG_IMX_SDMA=m +CONFIG_K3_DMA=y +CONFIG_MV_XOR=y +CONFIG_MV_XOR_V2=y +CONFIG_OWL_DMA=y +CONFIG_PL330_DMA=y +CONFIG_TEGRA186_GPC_DMA=m +CONFIG_TEGRA20_APB_DMA=y +CONFIG_TEGRA210_ADMA=m +CONFIG_QCOM_BAM_DMA=y +CONFIG_QCOM_HIDMA_MGMT=y +CONFIG_QCOM_HIDMA=y +CONFIG_RCAR_DMAC=y +CONFIG_RENESAS_USB_DMAC=m +CONFIG_RZ_DMAC=y +CONFIG_TI_K3_UDMA=y +CONFIG_TI_K3_UDMA_GLUE_LAYER=y +CONFIG_VFIO=y +CONFIG_VFIO_PCI=y +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_BALLOON=y +CONFIG_VIRTIO_MMIO=y +CONFIG_XEN_GNTDEV=y +CONFIG_XEN_GRANT_DEV_ALLOC=y +CONFIG_STAGING=y +CONFIG_STAGING_MEDIA=y +CONFIG_VIDEO_HANTRO=m +CONFIG_VIDEO_IMX_MEDIA=m +CONFIG_CHROME_PLATFORMS=y +CONFIG_CROS_EC=y +CONFIG_CROS_EC_I2C=y +CONFIG_CROS_EC_SPI=y +CONFIG_CROS_EC_CHARDEV=m +CONFIG_COMMON_CLK_RK808=y +CONFIG_COMMON_CLK_SCMI=y +CONFIG_COMMON_CLK_SCPI=y +CONFIG_COMMON_CLK_CS2000_CP=y +CONFIG_COMMON_CLK_FSL_SAI=y +CONFIG_COMMON_CLK_S2MPS11=y +CONFIG_COMMON_CLK_PWM=y +CONFIG_COMMON_CLK_VC5=y +CONFIG_COMMON_CLK_BD718XX=m +CONFIG_CLK_RASPBERRYPI=m +CONFIG_CLK_IMX8MM=y +CONFIG_CLK_IMX8MN=y +CONFIG_CLK_IMX8MP=y +CONFIG_CLK_IMX8MQ=y +CONFIG_CLK_IMX8QXP=y +CONFIG_CLK_IMX8ULP=y +CONFIG_TI_SCI_CLK=y +CONFIG_COMMON_CLK_QCOM=y +CONFIG_QCOM_A53PLL=y +CONFIG_QCOM_CLK_APCS_MSM8916=y +CONFIG_QCOM_CLK_APCC_MSM8996=y +CONFIG_QCOM_CLK_SMD_RPM=y +CONFIG_QCOM_CLK_RPMH=y +CONFIG_IPQ_GCC_6018=y +CONFIG_IPQ_GCC_8074=y +CONFIG_MSM_GCC_8916=y +CONFIG_MSM_GCC_8994=y +CONFIG_MSM_MMCC_8996=y +CONFIG_MSM_GCC_8998=y +CONFIG_QCS_GCC_404=y +CONFIG_SC_GCC_7180=y +CONFIG_SC_GCC_7280=y +CONFIG_SDM_CAMCC_845=m +CONFIG_SDM_GPUCC_845=y +CONFIG_SDM_VIDEOCC_845=y +CONFIG_SDM_DISPCC_845=y +CONFIG_SM_GCC_8350=y +CONFIG_SM_GCC_8450=y +CONFIG_SM_GPUCC_8150=y +CONFIG_SM_GPUCC_8250=y +CONFIG_SM_DISPCC_8250=y +CONFIG_SM_VIDEOCC_8250=y +CONFIG_QCOM_HFPLL=y +CONFIG_CLK_GFM_LPASS_SM8250=m +CONFIG_CLK_RCAR_USB2_CLOCK_SEL=y +CONFIG_HWSPINLOCK=y +CONFIG_HWSPINLOCK_QCOM=y +CONFIG_RENESAS_OSTM=y +CONFIG_ARM_MHU=y +CONFIG_IMX_MBOX=y +CONFIG_PLATFORM_MHU=y +CONFIG_BCM2835_MBOX=y +CONFIG_QCOM_APCS_IPC=y +CONFIG_QCOM_IPCC=y +CONFIG_ROCKCHIP_IOMMU=y +CONFIG_TEGRA_IOMMU_SMMU=y +CONFIG_ARM_SMMU=y +CONFIG_ARM_SMMU_V3=y +CONFIG_MTK_IOMMU=y +CONFIG_QCOM_IOMMU=y +CONFIG_REMOTEPROC=y +CONFIG_QCOM_Q6V5_MSS=m +CONFIG_QCOM_Q6V5_PAS=m +CONFIG_QCOM_SYSMON=m +CONFIG_QCOM_WCNSS_PIL=m +CONFIG_RPMSG_CHAR=m +CONFIG_RPMSG_QCOM_GLINK_RPM=y +CONFIG_RPMSG_QCOM_GLINK_SMEM=m +CONFIG_RPMSG_QCOM_SMD=y +CONFIG_SOUNDWIRE=m +CONFIG_SOUNDWIRE_QCOM=m +CONFIG_OWL_PM_DOMAINS=y +CONFIG_RASPBERRYPI_POWER=y +CONFIG_FSL_DPAA=y +CONFIG_FSL_MC_DPIO=y +CONFIG_FSL_RCPM=y +CONFIG_MTK_DEVAPC=m +CONFIG_MTK_PMIC_WRAP=y +CONFIG_MAILBOX=y +CONFIG_QCOM_AOSS_QMP=y +CONFIG_QCOM_COMMAND_DB=y +CONFIG_QCOM_CPR=y +CONFIG_QCOM_GENI_SE=y +CONFIG_QCOM_RMTFS_MEM=m +CONFIG_QCOM_RPMH=y +CONFIG_QCOM_RPMHPD=y +CONFIG_QCOM_RPMPD=y +CONFIG_QCOM_SMEM=y +CONFIG_QCOM_SMD_RPM=y +CONFIG_QCOM_SMP2P=y +CONFIG_QCOM_SMSM=y +CONFIG_QCOM_SOCINFO=m +CONFIG_QCOM_STATS=m +CONFIG_QCOM_WCNSS_CTRL=m +CONFIG_QCOM_APR=m +CONFIG_ARCH_R8A77995=y +CONFIG_ARCH_R8A77990=y +CONFIG_ARCH_R8A77950=y +CONFIG_ARCH_R8A77951=y +CONFIG_ARCH_R8A77965=y +CONFIG_ARCH_R8A77960=y +CONFIG_ARCH_R8A77961=y +CONFIG_ARCH_R8A779F0=y +CONFIG_ARCH_R8A77980=y +CONFIG_ARCH_R8A77970=y +CONFIG_ARCH_R8A779A0=y +CONFIG_ARCH_R8A774C0=y +CONFIG_ARCH_R8A774E1=y +CONFIG_ARCH_R8A774A1=y +CONFIG_ARCH_R8A774B1=y +CONFIG_ARCH_R9A07G044=y +CONFIG_ROCKCHIP_IODOMAIN=y +CONFIG_ROCKCHIP_PM_DOMAINS=y +CONFIG_ARCH_TEGRA_132_SOC=y +CONFIG_ARCH_TEGRA_210_SOC=y +CONFIG_ARCH_TEGRA_186_SOC=y +CONFIG_ARCH_TEGRA_194_SOC=y +CONFIG_ARCH_TEGRA_234_SOC=y +CONFIG_TI_SCI_PM_DOMAINS=y +CONFIG_ARM_IMX_BUS_DEVFREQ=m +CONFIG_ARM_IMX8M_DDRC_DEVFREQ=m +CONFIG_EXTCON_PTN5150=m +CONFIG_EXTCON_USB_GPIO=y +CONFIG_EXTCON_USBC_CROS_EC=y +CONFIG_RENESAS_RPCIF=m +CONFIG_IIO=y +CONFIG_EXYNOS_ADC=y +CONFIG_MAX9611=m +CONFIG_QCOM_SPMI_VADC=m +CONFIG_QCOM_SPMI_ADC5=m +CONFIG_ROCKCHIP_SARADC=m +CONFIG_RZG2L_ADC=m +CONFIG_TI_ADS1015=m +CONFIG_IIO_CROS_EC_SENSORS_CORE=m +CONFIG_IIO_CROS_EC_SENSORS=m +CONFIG_IIO_ST_LSM6DSX=m +CONFIG_IIO_CROS_EC_LIGHT_PROX=m +CONFIG_SENSORS_ISL29018=m +CONFIG_VCNL4000=m +CONFIG_IIO_ST_MAGN_3AXIS=m +CONFIG_IIO_CROS_EC_BARO=m +CONFIG_MPL3115=m +CONFIG_PWM=y +CONFIG_PWM_BCM2835=m +CONFIG_PWM_BRCMSTB=m +CONFIG_PWM_CROS_EC=m +CONFIG_PWM_IMX27=m +CONFIG_PWM_MESON=m +CONFIG_PWM_MTK_DISP=m +CONFIG_PWM_MEDIATEK=m +CONFIG_PWM_RCAR=m +CONFIG_PWM_RENESAS_TPU=m +CONFIG_PWM_ROCKCHIP=y +CONFIG_PWM_SAMSUNG=y +CONFIG_PWM_SL28CPLD=m +CONFIG_PWM_SUN4I=m +CONFIG_PWM_TEGRA=m +CONFIG_PWM_VISCONTI=m +CONFIG_SL28CPLD_INTC=y +CONFIG_QCOM_PDC=y +CONFIG_RESET_IMX7=y +CONFIG_RESET_QCOM_AOSS=y +CONFIG_RESET_QCOM_PDC=m +CONFIG_RESET_RZG2L_USBPHY_CTRL=y +CONFIG_RESET_TI_SCI=y +CONFIG_PHY_XGENE=y +CONFIG_PHY_SUN4I_USB=y +CONFIG_PHY_CADENCE_SIERRA=m +CONFIG_PHY_MIXEL_MIPI_DPHY=m +CONFIG_PHY_FSL_IMX8M_PCIE=y +CONFIG_PHY_HI6220_USB=y +CONFIG_PHY_HISTB_COMBPHY=y +CONFIG_PHY_HISI_INNO_USB2=y +CONFIG_PHY_MVEBU_CP110_COMPHY=y +CONFIG_PHY_MTK_TPHY=y +CONFIG_PHY_QCOM_QMP=y +CONFIG_PHY_QCOM_QMP_TYPEC=y +CONFIG_PHY_QCOM_QUSB2=m +CONFIG_PHY_QCOM_UFS=y +CONFIG_PHY_QCOM_USB_HS=y +CONFIG_PHY_QCOM_USB_HS_SNPS_28NM=y +CONFIG_PHY_QCOM_USB_SS=y +CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y +CONFIG_PHY_RCAR_GEN3_PCIE=y +CONFIG_PHY_RCAR_GEN3_USB2=y +CONFIG_PHY_RCAR_GEN3_USB3=m +CONFIG_PHY_ROCKCHIP_EMMC=y +CONFIG_PHY_ROCKCHIP_INNO_HDMI=m +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY=m +CONFIG_PHY_ROCKCHIP_PCIE=m +CONFIG_PHY_ROCKCHIP_TYPEC=y +CONFIG_PHY_SAMSUNG_UFS=y +CONFIG_PHY_UNIPHIER_USB2=y +CONFIG_PHY_UNIPHIER_USB3=y +CONFIG_PHY_TEGRA_XUSB=y +CONFIG_PHY_AM654_SERDES=m +CONFIG_PHY_J721E_WIZ=m +CONFIG_ARM_SMMU_V3_PMU=m +CONFIG_FSL_IMX8_DDR_PMU=m +CONFIG_QCOM_L2_PMU=y +CONFIG_QCOM_L3_PMU=y +CONFIG_HISI_PMU=y +CONFIG_NVMEM_IMX_OCOTP=y +CONFIG_NVMEM_IMX_OCOTP_SCU=y +CONFIG_MTK_EFUSE=y +CONFIG_QCOM_QFPROM=y +CONFIG_ROCKCHIP_EFUSE=y +CONFIG_NVMEM_SUNXI_SID=y +CONFIG_UNIPHIER_EFUSE=y +CONFIG_MESON_EFUSE=m +CONFIG_NVMEM_RMEM=m +CONFIG_NVMEM_LAYERSCAPE_SFP=m +CONFIG_FPGA=y +CONFIG_FPGA_MGR_ALTERA_CVP=m +CONFIG_FPGA_MGR_STRATIX10_SOC=m +CONFIG_FPGA_BRIDGE=m +CONFIG_ALTERA_FREEZE_BRIDGE=m +CONFIG_FPGA_REGION=m +CONFIG_OF_FPGA_REGION=m +CONFIG_TEE=y +CONFIG_OPTEE=y +CONFIG_MUX_MMIO=y +CONFIG_SLIMBUS=m +CONFIG_SLIM_QCOM_CTRL=m +CONFIG_SLIM_QCOM_NGD_CTRL=m +CONFIG_INTERCONNECT=y +CONFIG_INTERCONNECT_IMX=m +CONFIG_INTERCONNECT_IMX8MM=m +CONFIG_INTERCONNECT_IMX8MN=m +CONFIG_INTERCONNECT_IMX8MQ=m +CONFIG_INTERCONNECT_QCOM=y +CONFIG_INTERCONNECT_QCOM_MSM8916=m +CONFIG_INTERCONNECT_QCOM_MSM8974=m +CONFIG_INTERCONNECT_QCOM_MSM8996=m +CONFIG_INTERCONNECT_QCOM_OSM_L3=m +CONFIG_INTERCONNECT_QCOM_QCS404=m +CONFIG_INTERCONNECT_QCOM_SC7180=m +CONFIG_INTERCONNECT_QCOM_SC7280=y +CONFIG_INTERCONNECT_QCOM_SDM845=y +CONFIG_INTERCONNECT_QCOM_SM8150=m +CONFIG_INTERCONNECT_QCOM_SM8250=m +CONFIG_INTERCONNECT_QCOM_SM8350=m +CONFIG_INTERCONNECT_QCOM_SM8450=m +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_FS_ENCRYPTION=y +CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y +CONFIG_FANOTIFY=y +CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y +CONFIG_QUOTA=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=m +CONFIG_CUSE=m +CONFIG_OVERLAY_FS=m +CONFIG_VFAT_FS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_HUGETLBFS=y +CONFIG_CONFIGFS_FS=y +CONFIG_EFIVAR_FS=y +CONFIG_SQUASHFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V4=y +CONFIG_NFS_V4_1=y +CONFIG_NFS_V4_2=y +CONFIG_ROOT_NFS=y +CONFIG_9P_FS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_SECURITY=y +CONFIG_CRYPTO_ECHAINIV=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_ANSI_CPRNG=y +CONFIG_CRYPTO_USER_API_HASH=y +CONFIG_CRYPTO_USER_API_SKCIPHER=y +CONFIG_CRYPTO_USER_API_RNG=m +CONFIG_CRYPTO_USER_API_AEAD=y +CONFIG_CRYPTO_DEV_SUN8I_CE=m +CONFIG_CRYPTO_DEV_FSL_CAAM=m +CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM=m +CONFIG_CRYPTO_DEV_QCE=y +CONFIG_CRYPTO_DEV_QCOM_RNG=m +CONFIG_CRYPTO_DEV_CCREE=m +CONFIG_CRYPTO_DEV_HISI_SEC2=m +CONFIG_CRYPTO_DEV_HISI_ZIP=m +CONFIG_CRYPTO_DEV_HISI_HPRE=m +CONFIG_CRYPTO_DEV_HISI_TRNG=m +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=32 +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_REDUCED=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_FTRACE is not set +CONFIG_MEMTEST=y diff --git a/rr-cache/b012cdb52162daf746bef83d824b648ac42cabc0/preimage b/rr-cache/b012cdb52162daf746bef83d824b648ac42cabc0/preimage new file mode 100644 index 0000000..750d913 --- /dev/null +++ b/rr-cache/b012cdb52162daf746bef83d824b648ac42cabc0/preimage @@ -0,0 +1,1332 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_AUDIT=y +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BPF_SYSCALL=y +CONFIG_BPF_JIT=y +CONFIG_PREEMPT=y +CONFIG_IRQ_TIME_ACCOUNTING=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_NUMA_BALANCING=y +CONFIG_MEMCG=y +CONFIG_BLK_CGROUP=y +CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_HUGETLB=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_PERF=y +CONFIG_CGROUP_BPF=y +CONFIG_USER_NS=y +CONFIG_SCHED_AUTOGROUP=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_COMPAT_BRK is not set +CONFIG_PROFILING=y +CONFIG_ARCH_ACTIONS=y +CONFIG_ARCH_SUNXI=y +CONFIG_ARCH_ALPINE=y +CONFIG_ARCH_APPLE=y +CONFIG_ARCH_BCM2835=y +CONFIG_ARCH_BCM4908=y +CONFIG_ARCH_BCM_IPROC=y +CONFIG_ARCH_BERLIN=y +CONFIG_ARCH_BRCMSTB=y +CONFIG_ARCH_EXYNOS=y +CONFIG_ARCH_K3=y +CONFIG_ARCH_LAYERSCAPE=y +CONFIG_ARCH_LG1K=y +CONFIG_ARCH_HISI=y +CONFIG_ARCH_KEEMBAY=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_ARCH_MESON=y +CONFIG_ARCH_MVEBU=y +CONFIG_ARCH_MXC=y +CONFIG_ARCH_QCOM=y +CONFIG_ARCH_RENESAS=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_ARCH_S32=y +CONFIG_ARCH_SEATTLE=y +CONFIG_ARCH_INTEL_SOCFPGA=y +CONFIG_ARCH_SYNQUACER=y +CONFIG_ARCH_TEGRA=y +CONFIG_ARCH_TESLA_FSD=y +CONFIG_ARCH_SPRD=y +CONFIG_ARCH_THUNDER=y +CONFIG_ARCH_THUNDER2=y +CONFIG_ARCH_UNIPHIER=y +CONFIG_ARCH_VEXPRESS=y +CONFIG_ARCH_VISCONTI=y +CONFIG_ARCH_XGENE=y +CONFIG_ARCH_ZYNQMP=y +CONFIG_ARM64_VA_BITS_48=y +CONFIG_SCHED_MC=y +CONFIG_SCHED_SMT=y +CONFIG_NUMA=y +CONFIG_KEXEC=y +CONFIG_KEXEC_FILE=y +CONFIG_CRASH_DUMP=y +CONFIG_XEN=y +CONFIG_COMPAT=y +CONFIG_RANDOMIZE_BASE=y +CONFIG_HIBERNATION=y +CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y +CONFIG_ENERGY_MODEL=y +CONFIG_ARM_CPUIDLE=y +CONFIG_ARM_PSCI_CPUIDLE=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=m +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m +CONFIG_CPUFREQ_DT=y +CONFIG_ACPI_CPPC_CPUFREQ=m +CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=m +CONFIG_ARM_ARMADA_37XX_CPUFREQ=y +CONFIG_ARM_SCPI_CPUFREQ=y +CONFIG_ARM_IMX_CPUFREQ_DT=m +CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y +CONFIG_ARM_QCOM_CPUFREQ_HW=y +CONFIG_ARM_RASPBERRYPI_CPUFREQ=m +CONFIG_ARM_SCMI_CPUFREQ=y +CONFIG_ARM_TEGRA186_CPUFREQ=y +CONFIG_ARM_MEDIATEK_CPUFREQ=y +CONFIG_QORIQ_CPUFREQ=y +CONFIG_ACPI=y +CONFIG_ACPI_APEI=y +CONFIG_ACPI_APEI_GHES=y +CONFIG_ACPI_APEI_PCIEAER=y +CONFIG_ACPI_APEI_MEMORY_FAILURE=y +CONFIG_ACPI_APEI_EINJ=y +CONFIG_VIRTUALIZATION=y +CONFIG_KVM=y +CONFIG_ARM64_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM64_CE=y +CONFIG_CRYPTO_SHA2_ARM64_CE=y +CONFIG_CRYPTO_SHA512_ARM64_CE=m +CONFIG_CRYPTO_SHA3_ARM64=m +CONFIG_CRYPTO_SM3_ARM64_CE=m +CONFIG_CRYPTO_GHASH_ARM64_CE=y +CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m +CONFIG_CRYPTO_AES_ARM64_CE_CCM=y +CONFIG_CRYPTO_AES_ARM64_CE_BLK=y +CONFIG_CRYPTO_CHACHA20_NEON=m +CONFIG_CRYPTO_AES_ARM64_BS=m +CONFIG_JUMP_LABEL=y +CONFIG_SECCOMP=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_BLK_INLINE_ENCRYPTION=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_KSM=y +CONFIG_MEMORY_FAILURE=y +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IPV6=m +CONFIG_NETFILTER=y +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +CONFIG_NETFILTER_XT_TARGET_LOG=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_NAT=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_BRIDGE=m +CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_NET_DSA=m +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_VLAN_8021Q_MVRP=y +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CBS=m +CONFIG_NET_SCH_ETF=m +CONFIG_NET_SCH_TAPRIO=m +CONFIG_NET_SCH_MQPRIO=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_FLOWER=m +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_GACT=m +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_GATE=m +CONFIG_QRTR=m +CONFIG_QRTR_SMD=m +CONFIG_QRTR_TUN=m +CONFIG_CAN=m +CONFIG_CAN_FLEXCAN=m +CONFIG_CAN_RCAR=m +CONFIG_CAN_RCAR_CANFD=m +CONFIG_CAN_MCP251XFD=m +CONFIG_BT=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m +# CONFIG_BT_LE is not set +CONFIG_BT_LEDS=y +# CONFIG_BT_DEBUGFS is not set +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTSDIO=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIUART_3WIRE=y +CONFIG_BT_HCIUART_BCM=y +CONFIG_BT_HCIUART_QCA=y +CONFIG_BT_HCIUART_MRVL=y +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m +CONFIG_BT_QCOMSMD=m +CONFIG_CFG80211=m +CONFIG_CFG80211_WEXT=y +CONFIG_MAC80211=m +CONFIG_MAC80211_LEDS=y +CONFIG_RFKILL=y +CONFIG_NET_9P=y +CONFIG_NET_9P_VIRTIO=y +CONFIG_NFC=m +CONFIG_NFC_NCI=m +CONFIG_NFC_S3FWRN5_I2C=m +CONFIG_PCI=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIEAER=y +CONFIG_PCI_IOV=y +CONFIG_PCI_PASID=y +CONFIG_HOTPLUG_PCI=y +CONFIG_HOTPLUG_PCI_ACPI=y +CONFIG_PCI_AARDVARK=y +CONFIG_PCI_TEGRA=y +CONFIG_PCIE_RCAR_HOST=y +CONFIG_PCIE_RCAR_EP=y +CONFIG_PCI_HOST_GENERIC=y +CONFIG_PCI_XGENE=y +CONFIG_PCIE_ALTERA=y +CONFIG_PCIE_ALTERA_MSI=y +CONFIG_PCI_HOST_THUNDER_PEM=y +CONFIG_PCI_HOST_THUNDER_ECAM=y +CONFIG_PCIE_ROCKCHIP_HOST=m +CONFIG_PCIE_BRCMSTB=m +CONFIG_PCI_IMX6=y +CONFIG_PCI_LAYERSCAPE=y +CONFIG_PCI_HISI=y +CONFIG_PCIE_QCOM=y +CONFIG_PCIE_ARMADA_8K=y +CONFIG_PCIE_KIRIN=y +CONFIG_PCIE_HISI_STB=y +CONFIG_PCIE_TEGRA194_HOST=m +CONFIG_PCIE_VISCONTI_HOST=y +CONFIG_PCIE_LAYERSCAPE_GEN4=y +CONFIG_PCI_ENDPOINT=y +CONFIG_PCI_ENDPOINT_CONFIGFS=y +CONFIG_PCI_EPF_TEST=m +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_FW_LOADER_USER_HELPER=y +CONFIG_HISILICON_LPC=y +CONFIG_TEGRA_ACONNECT=m +CONFIG_ARM_SCMI_PROTOCOL=y +CONFIG_ARM_SCPI_PROTOCOL=y +CONFIG_RASPBERRYPI_FIRMWARE=y +CONFIG_INTEL_STRATIX10_SERVICE=y +CONFIG_INTEL_STRATIX10_RSU=m +CONFIG_EFI_CAPSULE_LOADER=y +CONFIG_IMX_SCU=y +CONFIG_IMX_SCU_PD=y +CONFIG_GNSS=m +CONFIG_GNSS_MTK_SERIAL=m +CONFIG_MTD=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_SST25L=y +CONFIG_MTD_RAW_NAND=y +CONFIG_MTD_NAND_BRCMNAND=m +CONFIG_MTD_NAND_DENALI_DT=y +CONFIG_MTD_NAND_MARVELL=y +CONFIG_MTD_NAND_FSL_IFC=y +CONFIG_MTD_NAND_QCOM=y +CONFIG_MTD_SPI_NOR=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_NBD=m +CONFIG_VIRTIO_BLK=y +CONFIG_BLK_DEV_NVME=m +CONFIG_QCOM_COINCELL=m +CONFIG_QCOM_FASTRPC=m +CONFIG_SRAM=y +CONFIG_PCI_ENDPOINT_TEST=m +CONFIG_EEPROM_AT24=m +CONFIG_EEPROM_AT25=m +CONFIG_UACCE=m +# CONFIG_SCSI_PROC_FS is not set +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_SAS_ATA=y +CONFIG_SCSI_HISI_SAS=y +CONFIG_SCSI_HISI_SAS_PCI=y +CONFIG_MEGARAID_SAS=y +CONFIG_SCSI_MPT3SAS=m +CONFIG_SCSI_UFSHCD=y +CONFIG_SCSI_UFSHCD_PLATFORM=y +CONFIG_SCSI_UFS_QCOM=y +CONFIG_SCSI_UFS_HISI=y +CONFIG_SCSI_UFS_EXYNOS=y +CONFIG_SCSI_UFS_CRYPTO=y +CONFIG_ATA=y +CONFIG_SATA_AHCI=y +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_AHCI_BRCM=m +CONFIG_AHCI_CEVA=y +CONFIG_AHCI_MVEBU=y +CONFIG_AHCI_XGENE=y +CONFIG_AHCI_QORIQ=y +CONFIG_SATA_SIL24=y +CONFIG_SATA_RCAR=y +CONFIG_PATA_PLATFORM=y +CONFIG_PATA_OF_PLATFORM=y +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_BLK_DEV_DM=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_NETDEVICES=y +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +CONFIG_TUN=y +CONFIG_VETH=m +CONFIG_VIRTIO_NET=y +CONFIG_NET_DSA_BCM_SF2=m +CONFIG_NET_DSA_MSCC_FELIX=m +CONFIG_AMD_XGBE=y +CONFIG_NET_XGENE=y +CONFIG_ATL1C=m +CONFIG_BCMGENET=m +CONFIG_SYSTEMPORT=m +CONFIG_BNX2X=m +CONFIG_MACB=y +CONFIG_THUNDER_NIC_PF=y +CONFIG_FEC=y +CONFIG_FSL_FMAN=y +CONFIG_FSL_DPAA_ETH=y +CONFIG_FSL_DPAA2_ETH=y +CONFIG_FSL_ENETC=y +CONFIG_FSL_ENETC_VF=y +CONFIG_FSL_ENETC_QOS=y +CONFIG_HIX5HD2_GMAC=y +CONFIG_HNS_DSAF=y +CONFIG_HNS_ENET=y +CONFIG_HNS3=y +CONFIG_HNS3_HCLGE=y +CONFIG_HNS3_ENET=y +CONFIG_E1000=y +CONFIG_E1000E=y +CONFIG_IGB=y +CONFIG_IGBVF=y +CONFIG_MVNETA=y +CONFIG_MVPP2=y +CONFIG_SKY2=y +CONFIG_MLX4_EN=m +CONFIG_MLX5_CORE=m +CONFIG_MLX5_CORE_EN=y +CONFIG_QCOM_EMAC=m +CONFIG_RMNET=m +CONFIG_R8169=m +CONFIG_SH_ETH=y +CONFIG_RAVB=y +CONFIG_SMC91X=y +CONFIG_SMSC911X=y +CONFIG_SNI_AVE=y +CONFIG_SNI_NETSEC=y +CONFIG_STMMAC_ETH=m +CONFIG_TI_K3_AM65_CPSW_NUSS=y +CONFIG_QCOM_IPA=m +CONFIG_MESON_GXL_PHY=m +CONFIG_AQUANTIA_PHY=y +CONFIG_BCM54140_PHY=m +CONFIG_MARVELL_PHY=m +CONFIG_MARVELL_10G_PHY=m +CONFIG_MICREL_PHY=y +CONFIG_MICROSEMI_PHY=y +CONFIG_AT803X_PHY=y +CONFIG_REALTEK_PHY=y +CONFIG_ROCKCHIP_PHY=y +CONFIG_DP83867_PHY=y +CONFIG_VITESSE_PHY=y +CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y +CONFIG_MDIO_BUS_MUX_MMIOREG=y +CONFIG_USB_BRCMSTB=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_RTL8152=m +CONFIG_USB_LAN78XX=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_SR9800=m +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_ATH10K=m +CONFIG_ATH10K_PCI=m +CONFIG_ATH10K_SNOC=m +CONFIG_WCN36XX=m +CONFIG_ATH11K=m +CONFIG_ATH11K_AHB=m +CONFIG_ATH11K_PCI=m +CONFIG_BRCMFMAC=m +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_MWIFIEX_PCIE=m +CONFIG_WL18XX=m +CONFIG_WLCORE_SDIO=m +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_ADC=m +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_SNVS_PWRKEY=m +CONFIG_KEYBOARD_IMX_SC_KEY=m +CONFIG_KEYBOARD_CROS_EC=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ATMEL_MXT=m +CONFIG_TOUCHSCREEN_GOODIX=m +CONFIG_TOUCHSCREEN_EDT_FT5X06=m +CONFIG_INPUT_MISC=y +CONFIG_INPUT_PM8941_PWRKEY=y +CONFIG_INPUT_PM8XXX_VIBRATOR=m +CONFIG_INPUT_PWM_BEEPER=m +CONFIG_INPUT_PWM_VIBRA=m +CONFIG_INPUT_HISI_POWERKEY=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y +CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_BCM2835AUX=y +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_8250_OMAP=y +CONFIG_SERIAL_8250_MT6577=y +CONFIG_SERIAL_8250_UNIPHIER=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_MESON=y +CONFIG_SERIAL_MESON_CONSOLE=y +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_TEGRA=y +CONFIG_SERIAL_TEGRA_TCU=y +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_MSM=y +CONFIG_SERIAL_MSM_CONSOLE=y +CONFIG_SERIAL_QCOM_GENI=y +CONFIG_SERIAL_QCOM_GENI_CONSOLE=y +CONFIG_SERIAL_XILINX_PS_UART=y +CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y +CONFIG_SERIAL_FSL_LPUART=y +CONFIG_SERIAL_FSL_LPUART_CONSOLE=y +CONFIG_SERIAL_FSL_LINFLEXUART=y +CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE=y +CONFIG_SERIAL_MVEBU_UART=y +CONFIG_SERIAL_OWL=y +CONFIG_SERIAL_DEV_BUS=y +CONFIG_VIRTIO_CONSOLE=y +CONFIG_IPMI_HANDLER=m +CONFIG_IPMI_DEVICE_INTERFACE=m +CONFIG_IPMI_SI=m +CONFIG_TCG_TPM=y +CONFIG_TCG_TIS_I2C_INFINEON=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_I2C_BCM2835=m +CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_I2C_GPIO=m +CONFIG_I2C_IMX=y +CONFIG_I2C_IMX_LPI2C=y +CONFIG_I2C_MESON=y +CONFIG_I2C_MT65XX=y +CONFIG_I2C_MV64XXX=y +CONFIG_I2C_OMAP=y +CONFIG_I2C_OWL=y +CONFIG_I2C_PXA=y +CONFIG_I2C_QCOM_CCI=m +CONFIG_I2C_QCOM_GENI=m +CONFIG_I2C_QUP=y +CONFIG_I2C_RIIC=y +CONFIG_I2C_RK3X=y +CONFIG_I2C_S3C2410=y +CONFIG_I2C_SH_MOBILE=y +CONFIG_I2C_TEGRA=y +CONFIG_I2C_UNIPHIER_F=y +CONFIG_I2C_RCAR=y +CONFIG_I2C_CROS_EC_TUNNEL=y +CONFIG_SPI=y +CONFIG_SPI_ARMADA_3700=y +CONFIG_SPI_BCM2835=m +CONFIG_SPI_BCM2835AUX=m +CONFIG_SPI_CADENCE_QUADSPI=y +CONFIG_SPI_DESIGNWARE=m +CONFIG_SPI_DW_DMA=y +CONFIG_SPI_DW_MMIO=m +CONFIG_SPI_FSL_LPSPI=y +CONFIG_SPI_FSL_QUADSPI=y +CONFIG_SPI_NXP_FLEXSPI=y +CONFIG_SPI_IMX=m +CONFIG_SPI_FSL_DSPI=y +CONFIG_SPI_MESON_SPICC=m +CONFIG_SPI_MESON_SPIFC=m +CONFIG_SPI_ORION=y +CONFIG_SPI_PL022=y +CONFIG_SPI_ROCKCHIP=y +CONFIG_SPI_RPCIF=m +CONFIG_SPI_RSPI=m +CONFIG_SPI_QCOM_QSPI=m +CONFIG_SPI_QUP=y +CONFIG_SPI_QCOM_GENI=m +CONFIG_SPI_S3C64XX=y +CONFIG_SPI_SH_MSIOF=m +CONFIG_SPI_SUN6I=y +CONFIG_SPI_SPIDEV=m +CONFIG_SPMI=y +CONFIG_PINCTRL_MAX77620=y +CONFIG_PINCTRL_SINGLE=y +CONFIG_PINCTRL_OWL=y +CONFIG_PINCTRL_S700=y +CONFIG_PINCTRL_S900=y +CONFIG_PINCTRL_IMX8MM=y +CONFIG_PINCTRL_IMX8MN=y +CONFIG_PINCTRL_IMX8MP=y +CONFIG_PINCTRL_IMX8MQ=y +CONFIG_PINCTRL_IMX8QM=y +CONFIG_PINCTRL_IMX8QXP=y +CONFIG_PINCTRL_IMX8DXL=y +CONFIG_PINCTRL_IMX8ULP=y +CONFIG_PINCTRL_MSM=y +CONFIG_PINCTRL_IPQ8074=y +CONFIG_PINCTRL_IPQ6018=y +CONFIG_PINCTRL_MSM8916=y +CONFIG_PINCTRL_MSM8994=y +CONFIG_PINCTRL_MSM8996=y +CONFIG_PINCTRL_MSM8998=y +CONFIG_PINCTRL_QCS404=y +CONFIG_PINCTRL_QDF2XXX=y +CONFIG_PINCTRL_QCOM_SPMI_PMIC=y +CONFIG_PINCTRL_SC7180=y +CONFIG_PINCTRL_SC7280=y +CONFIG_PINCTRL_SDM845=y +CONFIG_PINCTRL_SM8150=y +CONFIG_PINCTRL_SM8250=y +CONFIG_PINCTRL_SM8350=y +CONFIG_PINCTRL_SM8450=y +CONFIG_PINCTRL_LPASS_LPI=m +CONFIG_GPIO_ALTERA=m +CONFIG_GPIO_DAVINCI=y +CONFIG_GPIO_DWAPB=y +CONFIG_GPIO_MB86S7X=y +CONFIG_GPIO_MPC8XXX=y +CONFIG_GPIO_MXC=y +CONFIG_GPIO_PL061=y +CONFIG_GPIO_RCAR=y +CONFIG_GPIO_UNIPHIER=y +CONFIG_GPIO_VISCONTI=y +CONFIG_GPIO_WCD934X=m +CONFIG_GPIO_XGENE=y +CONFIG_GPIO_XGENE_SB=y +CONFIG_GPIO_MAX732X=y +CONFIG_GPIO_PCA953X=y +CONFIG_GPIO_PCA953X_IRQ=y +CONFIG_GPIO_BD9571MWV=m +CONFIG_GPIO_MAX77620=y +CONFIG_GPIO_SL28CPLD=m +CONFIG_POWER_RESET_MSM=y +CONFIG_POWER_RESET_QCOM_PON=m +CONFIG_POWER_RESET_XGENE=y +CONFIG_POWER_RESET_SYSCON=y +CONFIG_SYSCON_REBOOT_MODE=y +CONFIG_BATTERY_SBS=m +CONFIG_BATTERY_BQ27XXX=y +CONFIG_BATTERY_MAX17042=m +CONFIG_CHARGER_BQ25890=m +CONFIG_CHARGER_BQ25980=m +CONFIG_SENSORS_ARM_SCMI=y +CONFIG_SENSORS_ARM_SCPI=y +CONFIG_SENSORS_JC42=m +CONFIG_SENSORS_LM75=m +CONFIG_SENSORS_LM90=m +CONFIG_SENSORS_PWM_FAN=m +CONFIG_SENSORS_RASPBERRYPI_HWMON=m +CONFIG_SENSORS_SL28CPLD=m +CONFIG_SENSORS_INA2XX=m +CONFIG_SENSORS_INA3221=m +CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y +CONFIG_CPU_THERMAL=y +CONFIG_THERMAL_EMULATION=y +CONFIG_IMX_SC_THERMAL=m +CONFIG_IMX8MM_THERMAL=m +CONFIG_QORIQ_THERMAL=m +CONFIG_SUN8I_THERMAL=y +CONFIG_ROCKCHIP_THERMAL=m +CONFIG_RCAR_THERMAL=y +CONFIG_RCAR_GEN3_THERMAL=y +CONFIG_RZG2L_THERMAL=y +CONFIG_ARMADA_THERMAL=y +CONFIG_BCM2711_THERMAL=m +CONFIG_BCM2835_THERMAL=m +CONFIG_BRCMSTB_THERMAL=m +CONFIG_EXYNOS_THERMAL=y +CONFIG_TEGRA_SOCTHERM=m +CONFIG_TEGRA_BPMP_THERMAL=m +CONFIG_QCOM_TSENS=y +CONFIG_QCOM_SPMI_TEMP_ALARM=m +CONFIG_QCOM_LMH=m +CONFIG_QCOM_SPMI_ADC_TM5=m +CONFIG_UNIPHIER_THERMAL=y +CONFIG_WATCHDOG=y +CONFIG_SL28CPLD_WATCHDOG=m +CONFIG_PM8916_WATCHDOG=y +CONFIG_ARM_SP805_WATCHDOG=y +CONFIG_ARM_SBSA_WATCHDOG=y +CONFIG_S3C2410_WATCHDOG=y +CONFIG_BCM7038_WDT=m +CONFIG_DW_WATCHDOG=y +CONFIG_SUNXI_WATCHDOG=m +CONFIG_IMX2_WDT=y +CONFIG_IMX_SC_WDT=m +CONFIG_QCOM_WDT=m +CONFIG_MESON_GXBB_WATCHDOG=m +CONFIG_MESON_WATCHDOG=m +CONFIG_ARM_SMC_WATCHDOG=y +CONFIG_RENESAS_WDT=y +CONFIG_RENESAS_RZG2LWDT=y +CONFIG_UNIPHIER_WATCHDOG=y +CONFIG_BCM2835_WDT=y +CONFIG_MFD_ALTERA_SYSMGR=y +CONFIG_MFD_BD9571MWV=y +CONFIG_MFD_AXP20X_I2C=y +CONFIG_MFD_AXP20X_RSB=y +CONFIG_MFD_EXYNOS_LPASS=m +CONFIG_MFD_HI6421_PMIC=y +CONFIG_MFD_HI655X_PMIC=y +CONFIG_MFD_MAX77620=y +CONFIG_MFD_MT6397=y +CONFIG_MFD_QCOM_QCA639X=y +CONFIG_MFD_QCOM_RPM=y +CONFIG_MFD_SPMI_PMIC=y +CONFIG_MFD_RK808=y +CONFIG_MFD_SEC_CORE=y +CONFIG_MFD_SL28CPLD=y +CONFIG_MFD_ROHM_BD718XX=y +CONFIG_MFD_WCD934X=m +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_AXP20X=y +CONFIG_REGULATOR_BD718XX=y +CONFIG_REGULATOR_BD9571MWV=y +CONFIG_REGULATOR_FAN53555=y +CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_HI6421V530=y +CONFIG_REGULATOR_HI655X=y +CONFIG_REGULATOR_MAX77620=y +CONFIG_REGULATOR_MAX8973=y +CONFIG_REGULATOR_MP8859=y +CONFIG_REGULATOR_MT6358=y +CONFIG_REGULATOR_MT6397=y +CONFIG_REGULATOR_PCA9450=y +CONFIG_REGULATOR_PF8X00=y +CONFIG_REGULATOR_PFUZE100=y +CONFIG_REGULATOR_PWM=y +CONFIG_REGULATOR_QCOM_RPMH=y +CONFIG_REGULATOR_QCOM_SMD_RPM=y +CONFIG_REGULATOR_QCOM_SPMI=y +CONFIG_REGULATOR_QCOM_USB_VBUS=m +CONFIG_REGULATOR_RK808=y +CONFIG_REGULATOR_S2MPS11=y +CONFIG_REGULATOR_TPS65132=m +CONFIG_REGULATOR_VCTRL=m +CONFIG_RC_CORE=m +CONFIG_RC_DECODERS=y +CONFIG_RC_DEVICES=y +CONFIG_IR_MESON=m +CONFIG_IR_SUNXI=m +CONFIG_MEDIA_SUPPORT=m +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y +CONFIG_MEDIA_SDR_SUPPORT=y +CONFIG_MEDIA_PLATFORM_SUPPORT=y +# CONFIG_DVB_NET is not set +CONFIG_MEDIA_USB_SUPPORT=y +CONFIG_USB_VIDEO_CLASS=m +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_QCOM_CAMSS=m +CONFIG_VIDEO_RCAR_CSI2=m +CONFIG_VIDEO_RCAR_VIN=m +CONFIG_VIDEO_SUN6I_CSI=m +CONFIG_VIDEO_RCAR_ISP=m +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m +CONFIG_VIDEO_SAMSUNG_S5P_MFC=m +CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m +CONFIG_VIDEO_RENESAS_FDP1=m +CONFIG_VIDEO_RENESAS_FCP=m +CONFIG_VIDEO_RENESAS_VSP1=m +CONFIG_VIDEO_QCOM_VENUS=m +CONFIG_SDR_PLATFORM_DRIVERS=y +CONFIG_VIDEO_RCAR_DRIF=m +CONFIG_VIDEO_IMX219=m +CONFIG_VIDEO_OV5640=m +CONFIG_VIDEO_OV5645=m +CONFIG_DRM=m +CONFIG_DRM_I2C_NXP_TDA998X=m +CONFIG_DRM_MALI_DISPLAY=m +CONFIG_DRM_NOUVEAU=m +CONFIG_DRM_EXYNOS=m +CONFIG_DRM_EXYNOS5433_DECON=y +CONFIG_DRM_EXYNOS7_DECON=y +CONFIG_DRM_EXYNOS_DSI=y +# CONFIG_DRM_EXYNOS_DP is not set +CONFIG_DRM_EXYNOS_HDMI=y +CONFIG_DRM_EXYNOS_MIC=y +CONFIG_DRM_ROCKCHIP=m +CONFIG_ROCKCHIP_ANALOGIX_DP=y +CONFIG_ROCKCHIP_CDN_DP=y +CONFIG_ROCKCHIP_DW_HDMI=y +CONFIG_ROCKCHIP_DW_MIPI_DSI=y +CONFIG_ROCKCHIP_INNO_HDMI=y +CONFIG_ROCKCHIP_LVDS=y +CONFIG_DRM_RCAR_DU=m +CONFIG_DRM_RCAR_DW_HDMI=m +CONFIG_DRM_RCAR_MIPI_DSI=m +CONFIG_DRM_SUN4I=m +CONFIG_DRM_SUN6I_DSI=m +CONFIG_DRM_SUN8I_DW_HDMI=m +CONFIG_DRM_SUN8I_MIXER=m +CONFIG_DRM_MSM=m +CONFIG_DRM_TEGRA=m +CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=m +CONFIG_DRM_PANEL_LVDS=m +CONFIG_DRM_PANEL_SIMPLE=m +CONFIG_DRM_PANEL_EDP=m +CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=m +CONFIG_DRM_PANEL_RAYDIUM_RM67191=m +CONFIG_DRM_PANEL_SITRONIX_ST7703=m +CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m +CONFIG_DRM_LONTIUM_LT8912B=m +CONFIG_DRM_LONTIUM_LT9611=m +CONFIG_DRM_LONTIUM_LT9611UXC=m +CONFIG_DRM_NWL_MIPI_DSI=m +CONFIG_DRM_PARADE_PS8640=m +CONFIG_DRM_SII902X=m +CONFIG_DRM_SIMPLE_BRIDGE=m +CONFIG_DRM_THINE_THC63LVD1024=m +CONFIG_DRM_TI_SN65DSI86=m +CONFIG_DRM_I2C_ADV7511=m +CONFIG_DRM_I2C_ADV7511_AUDIO=y +CONFIG_DRM_DW_HDMI_AHB_AUDIO=m +CONFIG_DRM_DW_HDMI_CEC=m +CONFIG_DRM_IMX_DCSS=m +CONFIG_DRM_VC4=m +CONFIG_DRM_ETNAVIV=m +CONFIG_DRM_HISI_HIBMC=m +CONFIG_DRM_HISI_KIRIN=m +CONFIG_DRM_MEDIATEK=m +CONFIG_DRM_MEDIATEK_HDMI=m +CONFIG_DRM_MXSFB=m +CONFIG_DRM_MESON=m +CONFIG_DRM_PL111=m +CONFIG_DRM_LIMA=m +CONFIG_DRM_PANFROST=m +CONFIG_FB=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_EFI=y +CONFIG_BACKLIGHT_PWM=m +CONFIG_BACKLIGHT_LP855X=m +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_HDA_TEGRA=m +CONFIG_SND_HDA_CODEC_HDMI=m +CONFIG_SND_SOC=y +CONFIG_SND_BCM2835_SOC_I2S=m +CONFIG_SND_SOC_FSL_ASRC=m +CONFIG_SND_SOC_FSL_MICFIL=m +CONFIG_SND_SOC_FSL_EASRC=m +CONFIG_SND_IMX_SOC=m +CONFIG_SND_SOC_IMX_SGTL5000=m +CONFIG_SND_SOC_IMX_SPDIF=m +CONFIG_SND_SOC_FSL_ASOC_CARD=m +CONFIG_SND_SOC_IMX_AUDMIX=m +CONFIG_SND_MESON_AXG_SOUND_CARD=m +CONFIG_SND_MESON_GX_SOUND_CARD=m +CONFIG_SND_SOC_QCOM=m +CONFIG_SND_SOC_APQ8016_SBC=m +CONFIG_SND_SOC_MSM8996=m +CONFIG_SND_SOC_QDSP6=m +CONFIG_SND_SOC_SDM845=m +CONFIG_SND_SOC_SM8250=m +CONFIG_SND_SOC_ROCKCHIP=m +CONFIG_SND_SOC_ROCKCHIP_SPDIF=m +CONFIG_SND_SOC_ROCKCHIP_RT5645=m +CONFIG_SND_SOC_RK3399_GRU_SOUND=m +CONFIG_SND_SOC_SAMSUNG=y +CONFIG_SND_SOC_RCAR=m +CONFIG_SND_SOC_RZ=m +CONFIG_SND_SUN4I_I2S=m +CONFIG_SND_SUN4I_SPDIF=m +CONFIG_SND_SOC_TEGRA=m +CONFIG_SND_SOC_TEGRA210_AHUB=m +CONFIG_SND_SOC_TEGRA210_DMIC=m +CONFIG_SND_SOC_TEGRA210_I2S=m +CONFIG_SND_SOC_TEGRA186_DSPK=m +CONFIG_SND_SOC_TEGRA210_ADMAIF=m +CONFIG_SND_SOC_TEGRA210_MVC=m +CONFIG_SND_SOC_TEGRA210_SFC=m +CONFIG_SND_SOC_TEGRA210_AMX=m +CONFIG_SND_SOC_TEGRA210_ADX=m +CONFIG_SND_SOC_TEGRA210_MIXER=m +CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD=m +CONFIG_SND_SOC_AK4613=m +CONFIG_SND_SOC_ES7134=m +CONFIG_SND_SOC_ES7241=m +CONFIG_SND_SOC_GTM601=m +CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m +CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m +CONFIG_SND_SOC_PCM3168A_I2C=m +CONFIG_SND_SOC_RT5659=m +CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m +CONFIG_SND_SOC_SIMPLE_MUX=m +CONFIG_SND_SOC_TAS571X=m +CONFIG_SND_SOC_TLV320AIC32X4_I2C=m +CONFIG_SND_SOC_WCD9335=m +CONFIG_SND_SOC_WCD934X=m +CONFIG_SND_SOC_WM8904=m +CONFIG_SND_SOC_WM8960=m +CONFIG_SND_SOC_WM8962=m +CONFIG_SND_SOC_WM8978=m +CONFIG_SND_SOC_WSA881X=m +CONFIG_SND_SOC_NAU8822=m +CONFIG_SND_SOC_LPASS_WSA_MACRO=m +CONFIG_SND_SOC_LPASS_VA_MACRO=m +CONFIG_SND_SOC_LPASS_RX_MACRO=m +CONFIG_SND_SOC_LPASS_TX_MACRO=m +CONFIG_SND_SIMPLE_CARD=m +CONFIG_SND_AUDIO_GRAPH_CARD=m +CONFIG_SND_AUDIO_GRAPH_CARD2=m +CONFIG_HID_MULTITOUCH=m +CONFIG_I2C_HID_ACPI=m +CONFIG_I2C_HID_OF=m +CONFIG_I2C_HID=m +CONFIG_USB=y +CONFIG_USB_OTG=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PCI_RENESAS=m +CONFIG_USB_XHCI_TEGRA=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_EXYNOS=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_EXYNOS=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_RENESAS_USBHS_HCD=m +CONFIG_USB_RENESAS_USBHS=m +CONFIG_USB_ACM=m +CONFIG_USB_STORAGE=y +CONFIG_USB_CDNS_SUPPORT=m +CONFIG_USB_CDNS3=m +CONFIG_USB_CDNS3_GADGET=y +CONFIG_USB_CDNS3_HOST=y +CONFIG_USB_MTU3=y +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_ULPI=y +CONFIG_USB_DWC2=y +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_ISP1760=y +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_CP210X=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_HSIC_USB3503=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_USB_GADGET=y +CONFIG_USB_RENESAS_USBHS_UDC=m +CONFIG_USB_RENESAS_USB3=m +CONFIG_USB_TEGRA_XUDC=m +CONFIG_USB_CONFIGFS=m +CONFIG_USB_CONFIGFS_SERIAL=y +CONFIG_USB_CONFIGFS_ACM=y +CONFIG_USB_CONFIGFS_OBEX=y +CONFIG_USB_CONFIGFS_NCM=y +CONFIG_USB_CONFIGFS_ECM=y +CONFIG_USB_CONFIGFS_ECM_SUBSET=y +CONFIG_USB_CONFIGFS_RNDIS=y +CONFIG_USB_CONFIGFS_EEM=y +CONFIG_USB_CONFIGFS_MASS_STORAGE=y +CONFIG_USB_CONFIGFS_F_FS=y +CONFIG_TYPEC=y +CONFIG_TYPEC_TCPM=m +CONFIG_TYPEC_TCPCI=m +CONFIG_TYPEC_FUSB302=m +CONFIG_TYPEC_TPS6598X=m +<<<<<<< +CONFIG_TYPEC_HD3SS3220=m +======= +CONFIG_TYPEC_QCOM_PMIC=m +>>>>>>> +CONFIG_MMC=y +CONFIG_MMC_BLOCK_MINORS=32 +CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ACPI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_OF_ARASAN=y +CONFIG_MMC_SDHCI_OF_ESDHC=y +CONFIG_MMC_SDHCI_CADENCE=y +CONFIG_MMC_SDHCI_ESDHC_IMX=y +CONFIG_MMC_SDHCI_TEGRA=y +CONFIG_MMC_SDHCI_F_SDH30=y +CONFIG_MMC_MESON_GX=y +CONFIG_MMC_SDHCI_MSM=y +CONFIG_MMC_SPI=y +CONFIG_MMC_SDHI=y +CONFIG_MMC_UNIPHIER=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_EXYNOS=y +CONFIG_MMC_DW_HI3798CV200=y +CONFIG_MMC_DW_K3=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SUNXI=y +CONFIG_MMC_BCM2835=y +CONFIG_MMC_MTK=y +CONFIG_MMC_SDHCI_XENON=y +CONFIG_MMC_SDHCI_AM654=y +CONFIG_MMC_OWL=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_LM3692X=m +CONFIG_LEDS_PCA9532=m +CONFIG_LEDS_CLASS_MULTICOLOR=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_PWM=y +CONFIG_LEDS_QCOM_LPG=y +CONFIG_LEDS_SYSCON=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_DISK=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_LEDS_TRIGGER_PANIC=y +CONFIG_EDAC=y +CONFIG_EDAC_GHES=y +CONFIG_EDAC_LAYERSCAPE=m +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1307=m +CONFIG_RTC_DRV_HYM8563=m +CONFIG_RTC_DRV_MAX77686=y +CONFIG_RTC_DRV_RK808=m +CONFIG_RTC_DRV_PCF85063=m +CONFIG_RTC_DRV_PCF85363=m +CONFIG_RTC_DRV_M41T80=m +CONFIG_RTC_DRV_RX8581=m +CONFIG_RTC_DRV_RV3028=m +CONFIG_RTC_DRV_RV8803=m +CONFIG_RTC_DRV_S5M=y +CONFIG_RTC_DRV_DS3232=y +CONFIG_RTC_DRV_PCF2127=m +CONFIG_RTC_DRV_EFI=y +CONFIG_RTC_DRV_CROS_EC=y +CONFIG_RTC_DRV_FSL_FTM_ALARM=m +CONFIG_RTC_DRV_S3C=y +CONFIG_RTC_DRV_PL031=y +CONFIG_RTC_DRV_SUN6I=y +CONFIG_RTC_DRV_ARMADA38X=y +CONFIG_RTC_DRV_PM8XXX=m +CONFIG_RTC_DRV_TEGRA=y +CONFIG_RTC_DRV_SNVS=m +CONFIG_RTC_DRV_IMX_SC=m +CONFIG_RTC_DRV_XGENE=y +CONFIG_RTC_DRV_MT6397=m +CONFIG_DMADEVICES=y +CONFIG_DMA_BCM2835=y +CONFIG_DMA_SUN6I=m +CONFIG_FSL_EDMA=y +CONFIG_IMX_SDMA=m +CONFIG_K3_DMA=y +CONFIG_MV_XOR=y +CONFIG_MV_XOR_V2=y +CONFIG_OWL_DMA=y +CONFIG_PL330_DMA=y +CONFIG_TEGRA186_GPC_DMA=m +CONFIG_TEGRA20_APB_DMA=y +CONFIG_TEGRA210_ADMA=m +CONFIG_QCOM_BAM_DMA=y +CONFIG_QCOM_HIDMA_MGMT=y +CONFIG_QCOM_HIDMA=y +CONFIG_RCAR_DMAC=y +CONFIG_RENESAS_USB_DMAC=m +CONFIG_RZ_DMAC=y +CONFIG_TI_K3_UDMA=y +CONFIG_TI_K3_UDMA_GLUE_LAYER=y +CONFIG_VFIO=y +CONFIG_VFIO_PCI=y +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_BALLOON=y +CONFIG_VIRTIO_MMIO=y +CONFIG_XEN_GNTDEV=y +CONFIG_XEN_GRANT_DEV_ALLOC=y +CONFIG_STAGING=y +CONFIG_STAGING_MEDIA=y +CONFIG_VIDEO_HANTRO=m +CONFIG_VIDEO_IMX_MEDIA=m +CONFIG_CHROME_PLATFORMS=y +CONFIG_CROS_EC=y +CONFIG_CROS_EC_I2C=y +CONFIG_CROS_EC_SPI=y +CONFIG_CROS_EC_CHARDEV=m +CONFIG_COMMON_CLK_RK808=y +CONFIG_COMMON_CLK_SCMI=y +CONFIG_COMMON_CLK_SCPI=y +CONFIG_COMMON_CLK_CS2000_CP=y +CONFIG_COMMON_CLK_FSL_SAI=y +CONFIG_COMMON_CLK_S2MPS11=y +CONFIG_COMMON_CLK_PWM=y +CONFIG_COMMON_CLK_VC5=y +CONFIG_COMMON_CLK_BD718XX=m +CONFIG_CLK_RASPBERRYPI=m +CONFIG_CLK_IMX8MM=y +CONFIG_CLK_IMX8MN=y +CONFIG_CLK_IMX8MP=y +CONFIG_CLK_IMX8MQ=y +CONFIG_CLK_IMX8QXP=y +CONFIG_CLK_IMX8ULP=y +CONFIG_TI_SCI_CLK=y +CONFIG_COMMON_CLK_QCOM=y +CONFIG_QCOM_A53PLL=y +CONFIG_QCOM_CLK_APCS_MSM8916=y +CONFIG_QCOM_CLK_APCC_MSM8996=y +CONFIG_QCOM_CLK_SMD_RPM=y +CONFIG_QCOM_CLK_RPMH=y +CONFIG_IPQ_GCC_6018=y +CONFIG_IPQ_GCC_8074=y +CONFIG_MSM_GCC_8916=y +CONFIG_MSM_GCC_8994=y +CONFIG_MSM_MMCC_8996=y +CONFIG_MSM_GCC_8998=y +CONFIG_QCS_GCC_404=y +CONFIG_SC_GCC_7180=y +CONFIG_SC_GCC_7280=y +CONFIG_SDM_CAMCC_845=m +CONFIG_SDM_GPUCC_845=y +CONFIG_SDM_VIDEOCC_845=y +CONFIG_SDM_DISPCC_845=y +CONFIG_SM_GCC_8350=y +CONFIG_SM_GCC_8450=y +CONFIG_SM_GPUCC_8150=y +CONFIG_SM_GPUCC_8250=y +CONFIG_SM_DISPCC_8250=y +CONFIG_SM_VIDEOCC_8250=y +CONFIG_QCOM_HFPLL=y +CONFIG_CLK_GFM_LPASS_SM8250=m +CONFIG_CLK_RCAR_USB2_CLOCK_SEL=y +CONFIG_HWSPINLOCK=y +CONFIG_HWSPINLOCK_QCOM=y +CONFIG_RENESAS_OSTM=y +CONFIG_ARM_MHU=y +CONFIG_IMX_MBOX=y +CONFIG_PLATFORM_MHU=y +CONFIG_BCM2835_MBOX=y +CONFIG_QCOM_APCS_IPC=y +CONFIG_QCOM_IPCC=y +CONFIG_ROCKCHIP_IOMMU=y +CONFIG_TEGRA_IOMMU_SMMU=y +CONFIG_ARM_SMMU=y +CONFIG_ARM_SMMU_V3=y +CONFIG_MTK_IOMMU=y +CONFIG_QCOM_IOMMU=y +CONFIG_REMOTEPROC=y +CONFIG_QCOM_Q6V5_MSS=m +CONFIG_QCOM_Q6V5_PAS=m +CONFIG_QCOM_SYSMON=m +CONFIG_QCOM_WCNSS_PIL=m +CONFIG_RPMSG_CHAR=m +CONFIG_RPMSG_QCOM_GLINK_RPM=y +CONFIG_RPMSG_QCOM_GLINK_SMEM=m +CONFIG_RPMSG_QCOM_SMD=y +CONFIG_SOUNDWIRE=m +CONFIG_SOUNDWIRE_QCOM=m +CONFIG_OWL_PM_DOMAINS=y +CONFIG_RASPBERRYPI_POWER=y +CONFIG_FSL_DPAA=y +CONFIG_FSL_MC_DPIO=y +CONFIG_FSL_RCPM=y +CONFIG_MTK_DEVAPC=m +CONFIG_MTK_PMIC_WRAP=y +CONFIG_MAILBOX=y +CONFIG_QCOM_AOSS_QMP=y +CONFIG_QCOM_COMMAND_DB=y +CONFIG_QCOM_CPR=y +CONFIG_QCOM_GENI_SE=y +CONFIG_QCOM_RMTFS_MEM=m +CONFIG_QCOM_RPMH=y +CONFIG_QCOM_RPMHPD=y +CONFIG_QCOM_RPMPD=y +CONFIG_QCOM_SMEM=y +CONFIG_QCOM_SMD_RPM=y +CONFIG_QCOM_SMP2P=y +CONFIG_QCOM_SMSM=y +CONFIG_QCOM_SOCINFO=m +CONFIG_QCOM_STATS=m +CONFIG_QCOM_WCNSS_CTRL=m +CONFIG_QCOM_APR=m +CONFIG_ARCH_R8A77995=y +CONFIG_ARCH_R8A77990=y +CONFIG_ARCH_R8A77950=y +CONFIG_ARCH_R8A77951=y +CONFIG_ARCH_R8A77965=y +CONFIG_ARCH_R8A77960=y +CONFIG_ARCH_R8A77961=y +CONFIG_ARCH_R8A779F0=y +CONFIG_ARCH_R8A77980=y +CONFIG_ARCH_R8A77970=y +CONFIG_ARCH_R8A779A0=y +CONFIG_ARCH_R8A774C0=y +CONFIG_ARCH_R8A774E1=y +CONFIG_ARCH_R8A774A1=y +CONFIG_ARCH_R8A774B1=y +CONFIG_ARCH_R9A07G044=y +CONFIG_ROCKCHIP_IODOMAIN=y +CONFIG_ROCKCHIP_PM_DOMAINS=y +CONFIG_ARCH_TEGRA_132_SOC=y +CONFIG_ARCH_TEGRA_210_SOC=y +CONFIG_ARCH_TEGRA_186_SOC=y +CONFIG_ARCH_TEGRA_194_SOC=y +CONFIG_ARCH_TEGRA_234_SOC=y +CONFIG_TI_SCI_PM_DOMAINS=y +CONFIG_ARM_IMX_BUS_DEVFREQ=m +CONFIG_ARM_IMX8M_DDRC_DEVFREQ=m +CONFIG_EXTCON_PTN5150=m +CONFIG_EXTCON_USB_GPIO=y +CONFIG_EXTCON_USBC_CROS_EC=y +CONFIG_RENESAS_RPCIF=m +CONFIG_IIO=y +CONFIG_EXYNOS_ADC=y +CONFIG_MAX9611=m +CONFIG_QCOM_SPMI_VADC=m +CONFIG_QCOM_SPMI_ADC5=m +CONFIG_ROCKCHIP_SARADC=m +CONFIG_RZG2L_ADC=m +CONFIG_TI_ADS1015=m +CONFIG_IIO_CROS_EC_SENSORS_CORE=m +CONFIG_IIO_CROS_EC_SENSORS=m +CONFIG_IIO_ST_LSM6DSX=m +CONFIG_IIO_CROS_EC_LIGHT_PROX=m +CONFIG_SENSORS_ISL29018=m +CONFIG_VCNL4000=m +CONFIG_IIO_ST_MAGN_3AXIS=m +CONFIG_IIO_CROS_EC_BARO=m +CONFIG_MPL3115=m +CONFIG_PWM=y +CONFIG_PWM_BCM2835=m +CONFIG_PWM_BRCMSTB=m +CONFIG_PWM_CROS_EC=m +CONFIG_PWM_IMX27=m +CONFIG_PWM_MESON=m +CONFIG_PWM_MTK_DISP=m +CONFIG_PWM_MEDIATEK=m +CONFIG_PWM_RCAR=m +CONFIG_PWM_RENESAS_TPU=m +CONFIG_PWM_ROCKCHIP=y +CONFIG_PWM_SAMSUNG=y +CONFIG_PWM_SL28CPLD=m +CONFIG_PWM_SUN4I=m +CONFIG_PWM_TEGRA=m +CONFIG_PWM_VISCONTI=m +CONFIG_SL28CPLD_INTC=y +CONFIG_QCOM_PDC=y +CONFIG_RESET_IMX7=y +CONFIG_RESET_QCOM_AOSS=y +CONFIG_RESET_QCOM_PDC=m +CONFIG_RESET_RZG2L_USBPHY_CTRL=y +CONFIG_RESET_TI_SCI=y +CONFIG_PHY_XGENE=y +CONFIG_PHY_SUN4I_USB=y +CONFIG_PHY_CADENCE_SIERRA=m +CONFIG_PHY_MIXEL_MIPI_DPHY=m +CONFIG_PHY_FSL_IMX8M_PCIE=y +CONFIG_PHY_HI6220_USB=y +CONFIG_PHY_HISTB_COMBPHY=y +CONFIG_PHY_HISI_INNO_USB2=y +CONFIG_PHY_MVEBU_CP110_COMPHY=y +CONFIG_PHY_MTK_TPHY=y +<<<<<<< +CONFIG_PHY_QCOM_QMP=m +CONFIG_PHY_QCOM_QMP_TYPEC=y +======= +CONFIG_PHY_QCOM_QMP=y +>>>>>>> +CONFIG_PHY_QCOM_QUSB2=m +CONFIG_PHY_QCOM_UFS=y +CONFIG_PHY_QCOM_USB_HS=y +CONFIG_PHY_QCOM_USB_HS_SNPS_28NM=y +CONFIG_PHY_QCOM_USB_SS=y +CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y +CONFIG_PHY_RCAR_GEN3_PCIE=y +CONFIG_PHY_RCAR_GEN3_USB2=y +CONFIG_PHY_RCAR_GEN3_USB3=m +CONFIG_PHY_ROCKCHIP_EMMC=y +CONFIG_PHY_ROCKCHIP_INNO_HDMI=m +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY=m +CONFIG_PHY_ROCKCHIP_PCIE=m +CONFIG_PHY_ROCKCHIP_TYPEC=y +CONFIG_PHY_SAMSUNG_UFS=y +CONFIG_PHY_UNIPHIER_USB2=y +CONFIG_PHY_UNIPHIER_USB3=y +CONFIG_PHY_TEGRA_XUSB=y +CONFIG_PHY_AM654_SERDES=m +CONFIG_PHY_J721E_WIZ=m +CONFIG_ARM_SMMU_V3_PMU=m +CONFIG_FSL_IMX8_DDR_PMU=m +CONFIG_QCOM_L2_PMU=y +CONFIG_QCOM_L3_PMU=y +CONFIG_HISI_PMU=y +CONFIG_NVMEM_IMX_OCOTP=y +CONFIG_NVMEM_IMX_OCOTP_SCU=y +CONFIG_MTK_EFUSE=y +CONFIG_QCOM_QFPROM=y +CONFIG_ROCKCHIP_EFUSE=y +CONFIG_NVMEM_SUNXI_SID=y +CONFIG_UNIPHIER_EFUSE=y +CONFIG_MESON_EFUSE=m +CONFIG_NVMEM_RMEM=m +CONFIG_NVMEM_LAYERSCAPE_SFP=m +CONFIG_FPGA=y +CONFIG_FPGA_MGR_ALTERA_CVP=m +CONFIG_FPGA_MGR_STRATIX10_SOC=m +CONFIG_FPGA_BRIDGE=m +CONFIG_ALTERA_FREEZE_BRIDGE=m +CONFIG_FPGA_REGION=m +CONFIG_OF_FPGA_REGION=m +CONFIG_TEE=y +CONFIG_OPTEE=y +CONFIG_MUX_MMIO=y +CONFIG_SLIMBUS=m +CONFIG_SLIM_QCOM_CTRL=m +CONFIG_SLIM_QCOM_NGD_CTRL=m +CONFIG_INTERCONNECT=y +CONFIG_INTERCONNECT_IMX=m +CONFIG_INTERCONNECT_IMX8MM=m +CONFIG_INTERCONNECT_IMX8MN=m +CONFIG_INTERCONNECT_IMX8MQ=m +CONFIG_INTERCONNECT_QCOM=y +CONFIG_INTERCONNECT_QCOM_MSM8916=m +CONFIG_INTERCONNECT_QCOM_MSM8974=m +CONFIG_INTERCONNECT_QCOM_MSM8996=m +CONFIG_INTERCONNECT_QCOM_OSM_L3=m +CONFIG_INTERCONNECT_QCOM_QCS404=m +CONFIG_INTERCONNECT_QCOM_SC7180=m +CONFIG_INTERCONNECT_QCOM_SC7280=y +CONFIG_INTERCONNECT_QCOM_SDM845=y +CONFIG_INTERCONNECT_QCOM_SM8150=m +CONFIG_INTERCONNECT_QCOM_SM8250=m +CONFIG_INTERCONNECT_QCOM_SM8350=m +CONFIG_INTERCONNECT_QCOM_SM8450=m +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_FS_ENCRYPTION=y +CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y +CONFIG_FANOTIFY=y +CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y +CONFIG_QUOTA=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=m +CONFIG_CUSE=m +CONFIG_OVERLAY_FS=m +CONFIG_VFAT_FS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_HUGETLBFS=y +CONFIG_CONFIGFS_FS=y +CONFIG_EFIVAR_FS=y +CONFIG_SQUASHFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V4=y +CONFIG_NFS_V4_1=y +CONFIG_NFS_V4_2=y +CONFIG_ROOT_NFS=y +CONFIG_9P_FS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_SECURITY=y +CONFIG_CRYPTO_ECHAINIV=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_ANSI_CPRNG=y +CONFIG_CRYPTO_USER_API_HASH=y +CONFIG_CRYPTO_USER_API_SKCIPHER=y +CONFIG_CRYPTO_USER_API_RNG=m +CONFIG_CRYPTO_USER_API_AEAD=y +CONFIG_CRYPTO_DEV_SUN8I_CE=m +CONFIG_CRYPTO_DEV_FSL_CAAM=m +CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM=m +CONFIG_CRYPTO_DEV_QCE=y +CONFIG_CRYPTO_DEV_QCOM_RNG=m +CONFIG_CRYPTO_DEV_CCREE=m +CONFIG_CRYPTO_DEV_HISI_SEC2=m +CONFIG_CRYPTO_DEV_HISI_ZIP=m +CONFIG_CRYPTO_DEV_HISI_HPRE=m +CONFIG_CRYPTO_DEV_HISI_TRNG=m +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=32 +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_REDUCED=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_FTRACE is not set +CONFIG_MEMTEST=y diff --git a/rr-cache/b0831b91448fd8207f91a45bcd91fb06824e73e5/postimage b/rr-cache/b0831b91448fd8207f91a45bcd91fb06824e73e5/postimage new file mode 100644 index 0000000..073b2f6 --- /dev/null +++ b/rr-cache/b0831b91448fd8207f91a45bcd91fb06824e73e5/postimage @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_COMMON_CLK_QCOM) += clk-qcom.o + +clk-qcom-y += common.o +clk-qcom-y += clk-regmap.o +clk-qcom-y += clk-alpha-pll.o +clk-qcom-y += clk-pll.o +clk-qcom-y += clk-rcg.o +clk-qcom-y += clk-rcg2.o +clk-qcom-y += clk-branch.o +clk-qcom-y += clk-regmap-divider.o +clk-qcom-y += clk-regmap-mux.o +clk-qcom-y += clk-regmap-mux-div.o +clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-krait.o +clk-qcom-y += clk-hfpll.o +clk-qcom-y += reset.o +clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o + +# Keep alphabetically sorted by config +obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o +obj-$(CONFIG_APQ_MMCC_8084) += mmcc-apq8084.o +obj-$(CONFIG_CLK_GFM_LPASS_SM8250) += lpass-gfm-sm8250.o +obj-$(CONFIG_IPQ_APSS_PLL) += apss-ipq-pll.o +obj-$(CONFIG_IPQ_APSS_6018) += apss-ipq6018.o +obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o +obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o +obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o +obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o +obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o +obj-$(CONFIG_MDM_GCC_9607) += gcc-mdm9607.o +obj-$(CONFIG_MDM_GCC_9615) += gcc-mdm9615.o +obj-$(CONFIG_MDM_LCC_9615) += lcc-mdm9615.o +obj-$(CONFIG_MSM_GCC_8660) += gcc-msm8660.o +obj-$(CONFIG_MSM_GCC_8916) += gcc-msm8916.o +obj-$(CONFIG_MSM_GCC_8939) += gcc-msm8939.o +obj-$(CONFIG_MSM_GCC_8953) += gcc-msm8953.o +obj-$(CONFIG_MSM_GCC_8960) += gcc-msm8960.o +obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o +obj-$(CONFIG_MSM_GCC_8976) += gcc-msm8976.o +obj-$(CONFIG_MSM_GCC_8994) += gcc-msm8994.o +obj-$(CONFIG_MSM_GCC_8996) += gcc-msm8996.o +obj-$(CONFIG_MSM_LCC_8960) += lcc-msm8960.o +obj-$(CONFIG_MSM_GCC_8998) += gcc-msm8998.o +obj-$(CONFIG_MSM_GPUCC_8998) += gpucc-msm8998.o +obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o +obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o +obj-$(CONFIG_MSM_MMCC_8994) += mmcc-msm8994.o +obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o +obj-$(CONFIG_MSM_MMCC_8998) += mmcc-msm8998.o +obj-$(CONFIG_QCOM_A53PLL) += a53-pll.o +obj-$(CONFIG_QCOM_A7PLL) += a7-pll.o +obj-$(CONFIG_QCOM_CLK_APCS_MSM8916) += apcs-msm8916.o +obj-$(CONFIG_QCOM_CLK_APCC_MSM8996) += clk-cpu-8996.o +obj-$(CONFIG_QCOM_CLK_APCS_SDX55) += apcs-sdx55.o +obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o +obj-$(CONFIG_QCOM_CLK_RPMH) += clk-rpmh.o +obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o +obj-$(CONFIG_QCM_GCC_2290) += gcc-qcm2290.o +obj-$(CONFIG_QCM_DISPCC_2290) += dispcc-qcm2290.o +obj-$(CONFIG_QCS_GCC_404) += gcc-qcs404.o +obj-$(CONFIG_QCS_Q6SSTOP_404) += q6sstop-qcs404.o +obj-$(CONFIG_QCS_TURING_404) += turingcc-qcs404.o +obj-$(CONFIG_SC_CAMCC_7180) += camcc-sc7180.o +obj-$(CONFIG_SC_CAMCC_7280) += camcc-sc7280.o +obj-$(CONFIG_SC_DISPCC_7180) += dispcc-sc7180.o +obj-$(CONFIG_SC_DISPCC_7280) += dispcc-sc7280.o +obj-$(CONFIG_SC_GCC_7180) += gcc-sc7180.o +obj-$(CONFIG_SC_GCC_7280) += gcc-sc7280.o +obj-$(CONFIG_SC_GCC_8180X) += gcc-sc8180x.o +obj-$(CONFIG_SC_GPUCC_7180) += gpucc-sc7180.o +obj-$(CONFIG_SC_GPUCC_7280) += gpucc-sc7280.o +obj-$(CONFIG_SC_LPASSCC_7280) += lpasscc-sc7280.o +obj-$(CONFIG_SC_LPASS_CORECC_7180) += lpasscorecc-sc7180.o +obj-$(CONFIG_SC_MSS_7180) += mss-sc7180.o +obj-$(CONFIG_SC_VIDEOCC_7180) += videocc-sc7180.o +obj-$(CONFIG_SC_VIDEOCC_7280) += videocc-sc7280.o +obj-$(CONFIG_SDM_CAMCC_845) += camcc-sdm845.o +obj-$(CONFIG_SDM_DISPCC_845) += dispcc-sdm845.o +obj-$(CONFIG_SDM_GCC_660) += gcc-sdm660.o +obj-$(CONFIG_SDM_MMCC_660) += mmcc-sdm660.o +obj-$(CONFIG_SDM_GPUCC_660) += gpucc-sdm660.o +obj-$(CONFIG_SDM_GCC_845) += gcc-sdm845.o +obj-$(CONFIG_SDM_GPUCC_845) += gpucc-sdm845.o +obj-$(CONFIG_SDM_LPASSCC_845) += lpasscc-sdm845.o +obj-$(CONFIG_SDM_VIDEOCC_845) += videocc-sdm845.o +obj-$(CONFIG_SDX_GCC_55) += gcc-sdx55.o +obj-$(CONFIG_SDX_GCC_65) += gcc-sdx65.o +obj-$(CONFIG_SM_CAMCC_8250) += camcc-sm8250.o +obj-$(CONFIG_SM_CAMCC_8450) += camcc-sm8450.o +obj-$(CONFIG_SM_DISPCC_6125) += dispcc-sm6125.o +obj-$(CONFIG_SM_DISPCC_6350) += dispcc-sm6350.o +obj-$(CONFIG_SM_DISPCC_8250) += dispcc-sm8250.o +obj-$(CONFIG_SM_GCC_6115) += gcc-sm6115.o +obj-$(CONFIG_SM_GCC_6125) += gcc-sm6125.o +obj-$(CONFIG_SM_GCC_6350) += gcc-sm6350.o +obj-$(CONFIG_SM_GCC_8150) += gcc-sm8150.o +obj-$(CONFIG_SM_GCC_8250) += gcc-sm8250.o +obj-$(CONFIG_SM_GCC_8350) += gcc-sm8350.o +obj-$(CONFIG_SM_GCC_8450) += gcc-sm8450.o +obj-$(CONFIG_SM_GPUCC_6350) += gpucc-sm6350.o +obj-$(CONFIG_SM_GPUCC_8150) += gpucc-sm8150.o +obj-$(CONFIG_SM_GPUCC_8250) += gpucc-sm8250.o +obj-$(CONFIG_SM_VIDEOCC_8150) += videocc-sm8150.o +obj-$(CONFIG_SM_VIDEOCC_8250) += videocc-sm8250.o +obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o +obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o +obj-$(CONFIG_QCOM_HFPLL) += hfpll.o +obj-$(CONFIG_KRAITCC) += krait-cc.o diff --git a/rr-cache/b0831b91448fd8207f91a45bcd91fb06824e73e5/preimage b/rr-cache/b0831b91448fd8207f91a45bcd91fb06824e73e5/preimage new file mode 100644 index 0000000..aa93073 --- /dev/null +++ b/rr-cache/b0831b91448fd8207f91a45bcd91fb06824e73e5/preimage @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_COMMON_CLK_QCOM) += clk-qcom.o + +clk-qcom-y += common.o +clk-qcom-y += clk-regmap.o +clk-qcom-y += clk-alpha-pll.o +clk-qcom-y += clk-pll.o +clk-qcom-y += clk-rcg.o +clk-qcom-y += clk-rcg2.o +clk-qcom-y += clk-branch.o +clk-qcom-y += clk-regmap-divider.o +clk-qcom-y += clk-regmap-mux.o +clk-qcom-y += clk-regmap-mux-div.o +clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-krait.o +clk-qcom-y += clk-hfpll.o +clk-qcom-y += reset.o +clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o + +# Keep alphabetically sorted by config +obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o +obj-$(CONFIG_APQ_MMCC_8084) += mmcc-apq8084.o +obj-$(CONFIG_CLK_GFM_LPASS_SM8250) += lpass-gfm-sm8250.o +obj-$(CONFIG_IPQ_APSS_PLL) += apss-ipq-pll.o +obj-$(CONFIG_IPQ_APSS_6018) += apss-ipq6018.o +obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o +obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o +obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o +obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o +obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o +obj-$(CONFIG_MDM_GCC_9607) += gcc-mdm9607.o +obj-$(CONFIG_MDM_GCC_9615) += gcc-mdm9615.o +obj-$(CONFIG_MDM_LCC_9615) += lcc-mdm9615.o +obj-$(CONFIG_MSM_GCC_8660) += gcc-msm8660.o +obj-$(CONFIG_MSM_GCC_8916) += gcc-msm8916.o +obj-$(CONFIG_MSM_GCC_8939) += gcc-msm8939.o +obj-$(CONFIG_MSM_GCC_8953) += gcc-msm8953.o +obj-$(CONFIG_MSM_GCC_8960) += gcc-msm8960.o +obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o +obj-$(CONFIG_MSM_GCC_8976) += gcc-msm8976.o +obj-$(CONFIG_MSM_GCC_8994) += gcc-msm8994.o +obj-$(CONFIG_MSM_GCC_8996) += gcc-msm8996.o +obj-$(CONFIG_MSM_LCC_8960) += lcc-msm8960.o +obj-$(CONFIG_MSM_GCC_8998) += gcc-msm8998.o +obj-$(CONFIG_MSM_GPUCC_8998) += gpucc-msm8998.o +obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o +obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o +obj-$(CONFIG_MSM_MMCC_8994) += mmcc-msm8994.o +obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o +obj-$(CONFIG_MSM_MMCC_8998) += mmcc-msm8998.o +obj-$(CONFIG_QCOM_A53PLL) += a53-pll.o +obj-$(CONFIG_QCOM_A7PLL) += a7-pll.o +obj-$(CONFIG_QCOM_CLK_APCS_MSM8916) += apcs-msm8916.o +obj-$(CONFIG_QCOM_CLK_APCC_MSM8996) += clk-cpu-8996.o +obj-$(CONFIG_QCOM_CLK_APCS_SDX55) += apcs-sdx55.o +obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o +obj-$(CONFIG_QCOM_CLK_RPMH) += clk-rpmh.o +obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o +obj-$(CONFIG_QCM_GCC_2290) += gcc-qcm2290.o +obj-$(CONFIG_QCM_DISPCC_2290) += dispcc-qcm2290.o +obj-$(CONFIG_QCS_GCC_404) += gcc-qcs404.o +obj-$(CONFIG_QCS_Q6SSTOP_404) += q6sstop-qcs404.o +obj-$(CONFIG_QCS_TURING_404) += turingcc-qcs404.o +obj-$(CONFIG_SC_CAMCC_7180) += camcc-sc7180.o +obj-$(CONFIG_SC_CAMCC_7280) += camcc-sc7280.o +obj-$(CONFIG_SC_DISPCC_7180) += dispcc-sc7180.o +obj-$(CONFIG_SC_DISPCC_7280) += dispcc-sc7280.o +obj-$(CONFIG_SC_GCC_7180) += gcc-sc7180.o +obj-$(CONFIG_SC_GCC_7280) += gcc-sc7280.o +obj-$(CONFIG_SC_GCC_8180X) += gcc-sc8180x.o +obj-$(CONFIG_SC_GPUCC_7180) += gpucc-sc7180.o +obj-$(CONFIG_SC_GPUCC_7280) += gpucc-sc7280.o +obj-$(CONFIG_SC_LPASSCC_7280) += lpasscc-sc7280.o +obj-$(CONFIG_SC_LPASS_CORECC_7180) += lpasscorecc-sc7180.o +obj-$(CONFIG_SC_MSS_7180) += mss-sc7180.o +obj-$(CONFIG_SC_VIDEOCC_7180) += videocc-sc7180.o +obj-$(CONFIG_SC_VIDEOCC_7280) += videocc-sc7280.o +obj-$(CONFIG_SDM_CAMCC_845) += camcc-sdm845.o +obj-$(CONFIG_SDM_DISPCC_845) += dispcc-sdm845.o +obj-$(CONFIG_SDM_GCC_660) += gcc-sdm660.o +obj-$(CONFIG_SDM_MMCC_660) += mmcc-sdm660.o +obj-$(CONFIG_SDM_GPUCC_660) += gpucc-sdm660.o +obj-$(CONFIG_SDM_GCC_845) += gcc-sdm845.o +obj-$(CONFIG_SDM_GPUCC_845) += gpucc-sdm845.o +obj-$(CONFIG_SDM_LPASSCC_845) += lpasscc-sdm845.o +obj-$(CONFIG_SDM_VIDEOCC_845) += videocc-sdm845.o +obj-$(CONFIG_SDX_GCC_55) += gcc-sdx55.o +obj-$(CONFIG_SDX_GCC_65) += gcc-sdx65.o +obj-$(CONFIG_SM_CAMCC_8250) += camcc-sm8250.o +<<<<<<< +obj-$(CONFIG_SM_CAMCC_8450) += camcc-sm8450.o +======= +obj-$(CONFIG_SM_DISPCC_6125) += dispcc-sm6125.o +obj-$(CONFIG_SM_DISPCC_6350) += dispcc-sm6350.o +>>>>>>> +obj-$(CONFIG_SM_DISPCC_8250) += dispcc-sm8250.o +obj-$(CONFIG_SM_GCC_6115) += gcc-sm6115.o +obj-$(CONFIG_SM_GCC_6125) += gcc-sm6125.o +obj-$(CONFIG_SM_GCC_6350) += gcc-sm6350.o +obj-$(CONFIG_SM_GCC_8150) += gcc-sm8150.o +obj-$(CONFIG_SM_GCC_8250) += gcc-sm8250.o +obj-$(CONFIG_SM_GCC_8350) += gcc-sm8350.o +obj-$(CONFIG_SM_GCC_8450) += gcc-sm8450.o +obj-$(CONFIG_SM_GPUCC_6350) += gpucc-sm6350.o +obj-$(CONFIG_SM_GPUCC_8150) += gpucc-sm8150.o +obj-$(CONFIG_SM_GPUCC_8250) += gpucc-sm8250.o +obj-$(CONFIG_SM_VIDEOCC_8150) += videocc-sm8150.o +obj-$(CONFIG_SM_VIDEOCC_8250) += videocc-sm8250.o +obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o +obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o +obj-$(CONFIG_QCOM_HFPLL) += hfpll.o +obj-$(CONFIG_KRAITCC) += krait-cc.o diff --git a/rr-cache/b3630c810c18898e9194abf684c07eceaaef3304/postimage b/rr-cache/b3630c810c18898e9194abf684c07eceaaef3304/postimage new file mode 100644 index 0000000..dd01bb3 --- /dev/null +++ b/rr-cache/b3630c810c18898e9194abf684c07eceaaef3304/postimage @@ -0,0 +1,722 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +#include <linux/bitfield.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/interconnect.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/pm_opp.h> +#include <linux/slab.h> +#include <linux/spinlock.h> + +#define LUT_MAX_ENTRIES 40U +#define LUT_SRC GENMASK(31, 30) +#define LUT_L_VAL GENMASK(7, 0) +#define LUT_CORE_COUNT GENMASK(18, 16) +#define LUT_VOLT GENMASK(11, 0) +#define CLK_HW_DIV 2 +#define LUT_TURBO_IND 1 + +#define GT_IRQ_STATUS BIT(2) + +#define HZ_PER_KHZ 1000 + +struct qcom_cpufreq_soc_data { + u32 reg_enable; + u32 reg_domain_state; + u32 reg_dcvs_ctrl; + u32 reg_freq_lut; + u32 reg_volt_lut; + u32 reg_intr_clr; + u32 reg_current_vote; + u32 reg_perf_state; + u8 lut_row_size; +}; + +struct qcom_cpufreq_data { + void __iomem *base; + struct resource *res; + const struct qcom_cpufreq_soc_data *soc_data; + + /* + * Mutex to synchronize between de-init sequence and re-starting LMh + * polling/interrupts + */ + struct mutex throttle_lock; + int throttle_irq; + char irq_name[15]; + bool cancel_throttle; + struct delayed_work throttle_work; + struct cpufreq_policy *policy; + + bool per_core_dcvs; +}; + +static unsigned long cpu_hw_rate, xo_rate; +static bool icc_scaling_enabled; + +static int qcom_cpufreq_set_bw(struct cpufreq_policy *policy, + unsigned long freq_khz) +{ + unsigned long freq_hz = freq_khz * 1000; + struct dev_pm_opp *opp; + struct device *dev; + int ret; + + dev = get_cpu_device(policy->cpu); + if (!dev) + return -ENODEV; + + opp = dev_pm_opp_find_freq_exact(dev, freq_hz, true); + if (IS_ERR(opp)) + return PTR_ERR(opp); + + ret = dev_pm_opp_set_opp(dev, opp); + dev_pm_opp_put(opp); + return ret; +} + +static int qcom_cpufreq_update_opp(struct device *cpu_dev, + unsigned long freq_khz, + unsigned long volt) +{ + unsigned long freq_hz = freq_khz * 1000; + int ret; + + /* Skip voltage update if the opp table is not available */ + if (!icc_scaling_enabled) + return dev_pm_opp_add(cpu_dev, freq_hz, volt); + + ret = dev_pm_opp_adjust_voltage(cpu_dev, freq_hz, volt, volt, volt); + if (ret) { + dev_err(cpu_dev, "Voltage update failed freq=%ld\n", freq_khz); + return ret; + } + + return dev_pm_opp_enable(cpu_dev, freq_hz); +} + +static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy, + unsigned int index) +{ + struct qcom_cpufreq_data *data = policy->driver_data; + const struct qcom_cpufreq_soc_data *soc_data = data->soc_data; + unsigned long freq = policy->freq_table[index].frequency; + unsigned int i; + + writel_relaxed(index, data->base + soc_data->reg_perf_state); + + if (data->per_core_dcvs) + for (i = 1; i < cpumask_weight(policy->related_cpus); i++) + writel_relaxed(index, data->base + soc_data->reg_perf_state + i * 4); + + if (icc_scaling_enabled) + qcom_cpufreq_set_bw(policy, freq); + + return 0; +} + +static unsigned int qcom_cpufreq_hw_get(unsigned int cpu) +{ + struct qcom_cpufreq_data *data; + const struct qcom_cpufreq_soc_data *soc_data; + struct cpufreq_policy *policy; + unsigned int index; + + policy = cpufreq_cpu_get_raw(cpu); + if (!policy) + return 0; + + data = policy->driver_data; + soc_data = data->soc_data; + + index = readl_relaxed(data->base + soc_data->reg_perf_state); + index = min(index, LUT_MAX_ENTRIES - 1); + + return policy->freq_table[index].frequency; +} + +static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy, + unsigned int target_freq) +{ + struct qcom_cpufreq_data *data = policy->driver_data; + const struct qcom_cpufreq_soc_data *soc_data = data->soc_data; + unsigned int index; + unsigned int i; + + index = policy->cached_resolved_idx; + writel_relaxed(index, data->base + soc_data->reg_perf_state); + + if (data->per_core_dcvs) + for (i = 1; i < cpumask_weight(policy->related_cpus); i++) + writel_relaxed(index, data->base + soc_data->reg_perf_state + i * 4); + + return policy->freq_table[index].frequency; +} + +static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev, + struct cpufreq_policy *policy) +{ + u32 data, src, lval, i, core_count, prev_freq = 0, freq; + u32 volt; + struct cpufreq_frequency_table *table; + struct dev_pm_opp *opp; + unsigned long rate; + int ret; + struct qcom_cpufreq_data *drv_data = policy->driver_data; + const struct qcom_cpufreq_soc_data *soc_data = drv_data->soc_data; + + table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL); + if (!table) + return -ENOMEM; + + ret = dev_pm_opp_of_add_table(cpu_dev); + if (!ret) { + /* Disable all opps and cross-validate against LUT later */ + icc_scaling_enabled = true; + for (rate = 0; ; rate++) { + opp = dev_pm_opp_find_freq_ceil(cpu_dev, &rate); + if (IS_ERR(opp)) + break; + + dev_pm_opp_put(opp); + dev_pm_opp_disable(cpu_dev, rate); + } + } else if (ret != -ENODEV) { + dev_err(cpu_dev, "Invalid opp table in device tree\n"); + return ret; + } else { + policy->fast_switch_possible = true; + icc_scaling_enabled = false; + } + + for (i = 0; i < LUT_MAX_ENTRIES; i++) { + data = readl_relaxed(drv_data->base + soc_data->reg_freq_lut + + i * soc_data->lut_row_size); + src = FIELD_GET(LUT_SRC, data); + lval = FIELD_GET(LUT_L_VAL, data); + core_count = FIELD_GET(LUT_CORE_COUNT, data); + + data = readl_relaxed(drv_data->base + soc_data->reg_volt_lut + + i * soc_data->lut_row_size); + volt = FIELD_GET(LUT_VOLT, data) * 1000; + + if (src) + freq = xo_rate * lval / 1000; + else + freq = cpu_hw_rate / 1000; + + if (freq != prev_freq && core_count != LUT_TURBO_IND) { + if (!qcom_cpufreq_update_opp(cpu_dev, freq, volt)) { + table[i].frequency = freq; + dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i, + freq, core_count); + } else { + dev_warn(cpu_dev, "failed to update OPP for freq=%d\n", freq); + table[i].frequency = CPUFREQ_ENTRY_INVALID; + } + + } else if (core_count == LUT_TURBO_IND) { + table[i].frequency = CPUFREQ_ENTRY_INVALID; + } + + /* + * Two of the same frequencies with the same core counts means + * end of table + */ + if (i > 0 && prev_freq == freq) { + struct cpufreq_frequency_table *prev = &table[i - 1]; + + /* + * Only treat the last frequency that might be a boost + * as the boost frequency + */ + if (prev->frequency == CPUFREQ_ENTRY_INVALID) { + if (!qcom_cpufreq_update_opp(cpu_dev, prev_freq, volt)) { + prev->frequency = prev_freq; + prev->flags = CPUFREQ_BOOST_FREQ; + } else { + dev_warn(cpu_dev, "failed to update OPP for freq=%d\n", + freq); + } + } + + break; + } + + prev_freq = freq; + } + + table[i].frequency = CPUFREQ_TABLE_END; + policy->freq_table = table; + dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus); + + return 0; +} + +static void qcom_get_related_cpus(int index, struct cpumask *m) +{ + struct device_node *cpu_np; + struct of_phandle_args args; + int cpu, ret; + + for_each_possible_cpu(cpu) { + cpu_np = of_cpu_device_node_get(cpu); + if (!cpu_np) + continue; + + ret = of_parse_phandle_with_args(cpu_np, "qcom,freq-domain", + "#freq-domain-cells", 0, + &args); + of_node_put(cpu_np); + if (ret < 0) + continue; + + if (index == args.args[0]) + cpumask_set_cpu(cpu, m); + } +} + +static unsigned long qcom_lmh_get_throttle_freq(struct qcom_cpufreq_data *data) +{ + unsigned int lval; + + if (data->soc_data->reg_current_vote) + lval = readl_relaxed(data->base + data->soc_data->reg_current_vote) & 0x3ff; + else + lval = readl_relaxed(data->base + data->soc_data->reg_domain_state) & 0xff; + + return lval * xo_rate; +} + +static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data) +{ + struct cpufreq_policy *policy = data->policy; + int cpu = cpumask_first(policy->cpus); + struct device *dev = get_cpu_device(cpu); + unsigned long freq_hz, throttled_freq; + struct dev_pm_opp *opp; + + /* + * Synchronize against CPU going offline. + * cpufreq_offline() will get the write lock on policy->rwsem. + */ +retry: + if (unlikely(!down_read_trylock(&policy->rwsem))) { + mutex_lock(&data->throttle_lock); + if (data->cancel_throttle) { + mutex_unlock(&data->throttle_lock); + return; + } + + mutex_unlock(&data->throttle_lock); + + schedule(); + goto retry; + } + /* + * Get the h/w throttled frequency, normalize it using the + * registered opp table and use it to calculate thermal pressure. + */ + freq_hz = qcom_lmh_get_throttle_freq(data); + + opp = dev_pm_opp_find_freq_floor(dev, &freq_hz); + if (IS_ERR(opp) && PTR_ERR(opp) == -ERANGE) + opp = dev_pm_opp_find_freq_ceil(dev, &freq_hz); + + if (IS_ERR(opp)) { + dev_warn_ratelimited(dev, "Can't find the OPP for throttling: %pe!\n", opp); + } else { + throttled_freq = freq_hz / HZ_PER_KHZ; + + /* Update thermal pressure (the boost frequencies are accepted) */ + arch_update_thermal_pressure(policy->cpus, throttled_freq); + + dev_pm_opp_put(opp); + } + + /* + * In the unlikely case policy is unregistered do not enable + * polling or h/w interrupt. + * If we are here, we have the policy->rwsem read lock, + * cancel_throttle can be toggled only with the write lock. + */ + if (data->cancel_throttle) + goto out; + + /* + * If h/w throttled frequency is higher than what cpufreq has requested + * for, then stop polling and switch back to interrupt mechanism. + */ + if (throttled_freq >= qcom_cpufreq_hw_get(cpu)) + enable_irq(data->throttle_irq); + else + mod_delayed_work(system_highpri_wq, &data->throttle_work, + msecs_to_jiffies(10)); + +out: + up_read(&policy->rwsem); +} + +static void qcom_lmh_dcvs_poll(struct work_struct *work) +{ + struct qcom_cpufreq_data *data; + + data = container_of(work, struct qcom_cpufreq_data, throttle_work.work); + qcom_lmh_dcvs_notify(data); +} + +static irqreturn_t qcom_lmh_dcvs_handle_irq(int irq, void *data) +{ + struct qcom_cpufreq_data *c_data = data; + + /* Disable interrupt and enable polling */ + disable_irq_nosync(c_data->throttle_irq); + schedule_delayed_work(&c_data->throttle_work, 0); + + writel_relaxed(GT_IRQ_STATUS, + c_data->base + c_data->soc_data->reg_intr_clr); + + return IRQ_HANDLED; +} + +static const struct qcom_cpufreq_soc_data qcom_soc_data = { + .reg_enable = 0x0, + .reg_dcvs_ctrl = 0xbc, + .reg_freq_lut = 0x110, + .reg_volt_lut = 0x114, + .reg_current_vote = 0x704, + .reg_perf_state = 0x920, + .lut_row_size = 32, +}; + +static const struct qcom_cpufreq_soc_data epss_soc_data = { + .reg_enable = 0x0, + .reg_domain_state = 0x20, + .reg_dcvs_ctrl = 0xb0, + .reg_freq_lut = 0x100, + .reg_volt_lut = 0x200, + .reg_intr_clr = 0x308, + .reg_perf_state = 0x320, + .lut_row_size = 4, +}; + +static const struct of_device_id qcom_cpufreq_hw_match[] = { + { .compatible = "qcom,cpufreq-hw", .data = &qcom_soc_data }, + { .compatible = "qcom,cpufreq-epss", .data = &epss_soc_data }, + {} +}; +MODULE_DEVICE_TABLE(of, qcom_cpufreq_hw_match); + +static int qcom_cpufreq_hw_lmh_online(struct cpufreq_policy *policy); + +static int qcom_cpufreq_hw_lmh_init(struct cpufreq_policy *policy, int index) +{ + struct qcom_cpufreq_data *data = policy->driver_data; + struct platform_device *pdev = cpufreq_get_driver_data(); + + /* + * Look for LMh interrupt. If no interrupt line is specified / + * if there is an error, allow cpufreq to be enabled as usual. + */ + data->throttle_irq = platform_get_irq_optional(pdev, index); + if (data->throttle_irq == -ENXIO) + return 0; + if (data->throttle_irq < 0) + return data->throttle_irq; + + mutex_init(&data->throttle_lock); + INIT_DEFERRABLE_WORK(&data->throttle_work, qcom_lmh_dcvs_poll); + + return qcom_cpufreq_hw_lmh_online(policy); +} + +static int qcom_cpufreq_hw_lmh_online(struct cpufreq_policy *policy) +{ + struct qcom_cpufreq_data *data = policy->driver_data; + struct platform_device *pdev = cpufreq_get_driver_data(); + int ret; + + data->cancel_throttle = false; + data->policy = policy; + + snprintf(data->irq_name, sizeof(data->irq_name), "dcvsh-irq-%u", policy->cpu); + ret = request_threaded_irq(data->throttle_irq, NULL, qcom_lmh_dcvs_handle_irq, + IRQF_ONESHOT | IRQF_NO_AUTOEN, data->irq_name, data); + if (ret) { + dev_err(&pdev->dev, "Error registering %s: %d\n", data->irq_name, ret); + return 0; + } + + ret = irq_set_affinity_hint(data->throttle_irq, policy->cpus); + if (ret) + dev_err(&pdev->dev, "Failed to set CPU affinity of %s[%d]\n", + data->irq_name, data->throttle_irq); + + return 0; +} + +static int qcom_cpufreq_hw_lmh_offline(struct cpufreq_policy *policy) +{ + struct qcom_cpufreq_data *data = policy->driver_data; + + if (data->throttle_irq <= 0) + return 0; + + mutex_lock(&data->throttle_lock); + data->cancel_throttle = true; + mutex_unlock(&data->throttle_lock); + + cancel_delayed_work_sync(&data->throttle_work); + irq_set_affinity_hint(data->throttle_irq, NULL); + free_irq(data->throttle_irq, data); + + return 0; +} + +static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) +{ + struct platform_device *pdev = cpufreq_get_driver_data(); + struct device *dev = &pdev->dev; + struct of_phandle_args args; + struct device_node *cpu_np; + struct device *cpu_dev; + struct resource *res; + void __iomem *base; + struct qcom_cpufreq_data *data; + int ret, index; + + cpu_dev = get_cpu_device(policy->cpu); + if (!cpu_dev) { + pr_err("%s: failed to get cpu%d device\n", __func__, + policy->cpu); + return -ENODEV; + } + + cpu_np = of_cpu_device_node_get(policy->cpu); + if (!cpu_np) + return -EINVAL; + + ret = of_parse_phandle_with_args(cpu_np, "qcom,freq-domain", + "#freq-domain-cells", 0, &args); + of_node_put(cpu_np); + if (ret) + return ret; + + index = args.args[0]; + + res = platform_get_resource(pdev, IORESOURCE_MEM, index); + if (!res) { + dev_err(dev, "failed to get mem resource %d\n", index); + return -ENODEV; + } + + if (!request_mem_region(res->start, resource_size(res), res->name)) { + dev_err(dev, "failed to request resource %pR\n", res); + return -EBUSY; + } + + base = ioremap(res->start, resource_size(res)); + if (!base) { + dev_err(dev, "failed to map resource %pR\n", res); + ret = -ENOMEM; + goto release_region; + } + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + ret = -ENOMEM; + goto unmap_base; + } + + data->soc_data = of_device_get_match_data(&pdev->dev); + data->base = base; + data->res = res; + + /* HW should be in enabled state to proceed */ + if (!(readl_relaxed(base + data->soc_data->reg_enable) & 0x1)) { + dev_err(dev, "Domain-%d cpufreq hardware not enabled\n", index); + ret = -ENODEV; + goto error; + } + + if (readl_relaxed(base + data->soc_data->reg_dcvs_ctrl) & 0x1) + data->per_core_dcvs = true; + + qcom_get_related_cpus(index, policy->cpus); + if (cpumask_empty(policy->cpus)) { + dev_err(dev, "Domain-%d failed to get related CPUs\n", index); + ret = -ENOENT; + goto error; + } + + policy->driver_data = data; + policy->dvfs_possible_from_any_cpu = true; + + ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy); + if (ret) { + dev_err(dev, "Domain-%d failed to read LUT\n", index); + goto error; + } + + ret = dev_pm_opp_get_opp_count(cpu_dev); + if (ret <= 0) { + dev_err(cpu_dev, "Failed to add OPPs\n"); + ret = -ENODEV; + goto error; + } + + if (policy_has_boost_freq(policy)) { + ret = cpufreq_enable_boost_support(); + if (ret) + dev_warn(cpu_dev, "failed to enable boost: %d\n", ret); + } + + ret = qcom_cpufreq_hw_lmh_init(policy, index); + if (ret) + goto error; + + return 0; +error: + kfree(data); +unmap_base: + iounmap(base); +release_region: + release_mem_region(res->start, resource_size(res)); + return ret; +} + +static int qcom_cpufreq_hw_cpu_online(struct cpufreq_policy *policy) +{ + return qcom_cpufreq_hw_lmh_online(policy); +} + +static int qcom_cpufreq_hw_cpu_offline(struct cpufreq_policy *policy) +{ + return qcom_cpufreq_hw_lmh_offline(policy); +} + +static int qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy) +{ + struct device *cpu_dev = get_cpu_device(policy->cpu); + struct qcom_cpufreq_data *data = policy->driver_data; + struct resource *res = data->res; + void __iomem *base = data->base; + + dev_pm_opp_remove_all_dynamic(cpu_dev); + dev_pm_opp_of_cpumask_remove_table(policy->related_cpus); + kfree(policy->freq_table); + kfree(data); + iounmap(base); + release_mem_region(res->start, resource_size(res)); + + return 0; +} + +static void qcom_cpufreq_ready(struct cpufreq_policy *policy) +{ + struct qcom_cpufreq_data *data = policy->driver_data; + + if (data->throttle_irq >= 0) + enable_irq(data->throttle_irq); +} + +static struct freq_attr *qcom_cpufreq_hw_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + &cpufreq_freq_attr_scaling_boost_freqs, + NULL +}; + +static struct cpufreq_driver cpufreq_qcom_hw_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK | + CPUFREQ_HAVE_GOVERNOR_PER_POLICY | + CPUFREQ_IS_COOLING_DEV, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = qcom_cpufreq_hw_target_index, + .get = qcom_cpufreq_hw_get, + .init = qcom_cpufreq_hw_cpu_init, + .exit = qcom_cpufreq_hw_cpu_exit, + .online = qcom_cpufreq_hw_cpu_online, + .offline = qcom_cpufreq_hw_cpu_offline, + .register_em = cpufreq_register_em_with_opp, + .fast_switch = qcom_cpufreq_hw_fast_switch, + .name = "qcom-cpufreq-hw", + .attr = qcom_cpufreq_hw_attr, + .ready = qcom_cpufreq_ready, +}; + +static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev) +{ + struct device *cpu_dev; + struct clk *clk; + int ret; + + clk = clk_get(&pdev->dev, "xo"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + xo_rate = clk_get_rate(clk); + clk_put(clk); + + clk = clk_get(&pdev->dev, "alternate"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + cpu_hw_rate = clk_get_rate(clk) / CLK_HW_DIV; + clk_put(clk); + + cpufreq_qcom_hw_driver.driver_data = pdev; + + /* Check for optional interconnect paths on CPU0 */ + cpu_dev = get_cpu_device(0); + if (!cpu_dev) + return -EPROBE_DEFER; + + ret = dev_pm_opp_of_find_icc_paths(cpu_dev, NULL); + if (ret) + return ret; + + ret = cpufreq_register_driver(&cpufreq_qcom_hw_driver); + if (ret) + dev_err(&pdev->dev, "CPUFreq HW driver failed to register\n"); + else + dev_dbg(&pdev->dev, "QCOM CPUFreq HW driver initialized\n"); + + return ret; +} + +static int qcom_cpufreq_hw_driver_remove(struct platform_device *pdev) +{ + return cpufreq_unregister_driver(&cpufreq_qcom_hw_driver); +} + +static struct platform_driver qcom_cpufreq_hw_driver = { + .probe = qcom_cpufreq_hw_driver_probe, + .remove = qcom_cpufreq_hw_driver_remove, + .driver = { + .name = "qcom-cpufreq-hw", + .of_match_table = qcom_cpufreq_hw_match, + }, +}; + +static int __init qcom_cpufreq_hw_init(void) +{ + return platform_driver_register(&qcom_cpufreq_hw_driver); +} +postcore_initcall(qcom_cpufreq_hw_init); + +static void __exit qcom_cpufreq_hw_exit(void) +{ + platform_driver_unregister(&qcom_cpufreq_hw_driver); +} +module_exit(qcom_cpufreq_hw_exit); + +MODULE_DESCRIPTION("QCOM CPUFREQ HW Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/rr-cache/b3630c810c18898e9194abf684c07eceaaef3304/preimage b/rr-cache/b3630c810c18898e9194abf684c07eceaaef3304/preimage new file mode 100644 index 0000000..a4f0615 --- /dev/null +++ b/rr-cache/b3630c810c18898e9194abf684c07eceaaef3304/preimage @@ -0,0 +1,728 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +#include <linux/bitfield.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/interconnect.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/pm_opp.h> +#include <linux/slab.h> +#include <linux/spinlock.h> + +#define LUT_MAX_ENTRIES 40U +#define LUT_SRC GENMASK(31, 30) +#define LUT_L_VAL GENMASK(7, 0) +#define LUT_CORE_COUNT GENMASK(18, 16) +#define LUT_VOLT GENMASK(11, 0) +#define CLK_HW_DIV 2 +#define LUT_TURBO_IND 1 + +#define GT_IRQ_STATUS BIT(2) + +#define HZ_PER_KHZ 1000 + +struct qcom_cpufreq_soc_data { + u32 reg_enable; +<<<<<<< +======= + u32 reg_domain_state; +>>>>>>> + u32 reg_dcvs_ctrl; + u32 reg_freq_lut; + u32 reg_volt_lut; + u32 reg_intr_clr; + u32 reg_current_vote; + u32 reg_perf_state; + u8 lut_row_size; +}; + +struct qcom_cpufreq_data { + void __iomem *base; + struct resource *res; + const struct qcom_cpufreq_soc_data *soc_data; + + /* + * Mutex to synchronize between de-init sequence and re-starting LMh + * polling/interrupts + */ + struct mutex throttle_lock; + int throttle_irq; + char irq_name[15]; + bool cancel_throttle; + struct delayed_work throttle_work; + struct cpufreq_policy *policy; + + bool per_core_dcvs; +}; + +static unsigned long cpu_hw_rate, xo_rate; +static bool icc_scaling_enabled; + +static int qcom_cpufreq_set_bw(struct cpufreq_policy *policy, + unsigned long freq_khz) +{ + unsigned long freq_hz = freq_khz * 1000; + struct dev_pm_opp *opp; + struct device *dev; + int ret; + + dev = get_cpu_device(policy->cpu); + if (!dev) + return -ENODEV; + + opp = dev_pm_opp_find_freq_exact(dev, freq_hz, true); + if (IS_ERR(opp)) + return PTR_ERR(opp); + + ret = dev_pm_opp_set_opp(dev, opp); + dev_pm_opp_put(opp); + return ret; +} + +static int qcom_cpufreq_update_opp(struct device *cpu_dev, + unsigned long freq_khz, + unsigned long volt) +{ + unsigned long freq_hz = freq_khz * 1000; + int ret; + + /* Skip voltage update if the opp table is not available */ + if (!icc_scaling_enabled) + return dev_pm_opp_add(cpu_dev, freq_hz, volt); + + ret = dev_pm_opp_adjust_voltage(cpu_dev, freq_hz, volt, volt, volt); + if (ret) { + dev_err(cpu_dev, "Voltage update failed freq=%ld\n", freq_khz); + return ret; + } + + return dev_pm_opp_enable(cpu_dev, freq_hz); +} + +static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy, + unsigned int index) +{ + struct qcom_cpufreq_data *data = policy->driver_data; + const struct qcom_cpufreq_soc_data *soc_data = data->soc_data; + unsigned long freq = policy->freq_table[index].frequency; + unsigned int i; + + writel_relaxed(index, data->base + soc_data->reg_perf_state); + + if (data->per_core_dcvs) + for (i = 1; i < cpumask_weight(policy->related_cpus); i++) + writel_relaxed(index, data->base + soc_data->reg_perf_state + i * 4); + + if (icc_scaling_enabled) + qcom_cpufreq_set_bw(policy, freq); + + return 0; +} + +static unsigned int qcom_cpufreq_hw_get(unsigned int cpu) +{ + struct qcom_cpufreq_data *data; + const struct qcom_cpufreq_soc_data *soc_data; + struct cpufreq_policy *policy; + unsigned int index; + + policy = cpufreq_cpu_get_raw(cpu); + if (!policy) + return 0; + + data = policy->driver_data; + soc_data = data->soc_data; + + index = readl_relaxed(data->base + soc_data->reg_perf_state); + index = min(index, LUT_MAX_ENTRIES - 1); + + return policy->freq_table[index].frequency; +} + +static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy, + unsigned int target_freq) +{ + struct qcom_cpufreq_data *data = policy->driver_data; + const struct qcom_cpufreq_soc_data *soc_data = data->soc_data; + unsigned int index; + unsigned int i; + + index = policy->cached_resolved_idx; + writel_relaxed(index, data->base + soc_data->reg_perf_state); + + if (data->per_core_dcvs) + for (i = 1; i < cpumask_weight(policy->related_cpus); i++) + writel_relaxed(index, data->base + soc_data->reg_perf_state + i * 4); + + return policy->freq_table[index].frequency; +} + +static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev, + struct cpufreq_policy *policy) +{ + u32 data, src, lval, i, core_count, prev_freq = 0, freq; + u32 volt; + struct cpufreq_frequency_table *table; + struct dev_pm_opp *opp; + unsigned long rate; + int ret; + struct qcom_cpufreq_data *drv_data = policy->driver_data; + const struct qcom_cpufreq_soc_data *soc_data = drv_data->soc_data; + + table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL); + if (!table) + return -ENOMEM; + + ret = dev_pm_opp_of_add_table(cpu_dev); + if (!ret) { + /* Disable all opps and cross-validate against LUT later */ + icc_scaling_enabled = true; + for (rate = 0; ; rate++) { + opp = dev_pm_opp_find_freq_ceil(cpu_dev, &rate); + if (IS_ERR(opp)) + break; + + dev_pm_opp_put(opp); + dev_pm_opp_disable(cpu_dev, rate); + } + } else if (ret != -ENODEV) { + dev_err(cpu_dev, "Invalid opp table in device tree\n"); + return ret; + } else { + policy->fast_switch_possible = true; + icc_scaling_enabled = false; + } + + for (i = 0; i < LUT_MAX_ENTRIES; i++) { + data = readl_relaxed(drv_data->base + soc_data->reg_freq_lut + + i * soc_data->lut_row_size); + src = FIELD_GET(LUT_SRC, data); + lval = FIELD_GET(LUT_L_VAL, data); + core_count = FIELD_GET(LUT_CORE_COUNT, data); + + data = readl_relaxed(drv_data->base + soc_data->reg_volt_lut + + i * soc_data->lut_row_size); + volt = FIELD_GET(LUT_VOLT, data) * 1000; + + if (src) + freq = xo_rate * lval / 1000; + else + freq = cpu_hw_rate / 1000; + + if (freq != prev_freq && core_count != LUT_TURBO_IND) { + if (!qcom_cpufreq_update_opp(cpu_dev, freq, volt)) { + table[i].frequency = freq; + dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i, + freq, core_count); + } else { + dev_warn(cpu_dev, "failed to update OPP for freq=%d\n", freq); + table[i].frequency = CPUFREQ_ENTRY_INVALID; + } + + } else if (core_count == LUT_TURBO_IND) { + table[i].frequency = CPUFREQ_ENTRY_INVALID; + } + + /* + * Two of the same frequencies with the same core counts means + * end of table + */ + if (i > 0 && prev_freq == freq) { + struct cpufreq_frequency_table *prev = &table[i - 1]; + + /* + * Only treat the last frequency that might be a boost + * as the boost frequency + */ + if (prev->frequency == CPUFREQ_ENTRY_INVALID) { + if (!qcom_cpufreq_update_opp(cpu_dev, prev_freq, volt)) { + prev->frequency = prev_freq; + prev->flags = CPUFREQ_BOOST_FREQ; + } else { + dev_warn(cpu_dev, "failed to update OPP for freq=%d\n", + freq); + } + } + + break; + } + + prev_freq = freq; + } + + table[i].frequency = CPUFREQ_TABLE_END; + policy->freq_table = table; + dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus); + + return 0; +} + +static void qcom_get_related_cpus(int index, struct cpumask *m) +{ + struct device_node *cpu_np; + struct of_phandle_args args; + int cpu, ret; + + for_each_possible_cpu(cpu) { + cpu_np = of_cpu_device_node_get(cpu); + if (!cpu_np) + continue; + + ret = of_parse_phandle_with_args(cpu_np, "qcom,freq-domain", + "#freq-domain-cells", 0, + &args); + of_node_put(cpu_np); + if (ret < 0) + continue; + + if (index == args.args[0]) + cpumask_set_cpu(cpu, m); + } +} + +static unsigned long qcom_lmh_get_throttle_freq(struct qcom_cpufreq_data *data) +{ + unsigned int lval; + + if (data->soc_data->reg_current_vote) + lval = readl_relaxed(data->base + data->soc_data->reg_current_vote) & 0x3ff; + else + lval = readl_relaxed(data->base + data->soc_data->reg_domain_state) & 0xff; + + return lval * xo_rate; +} + +static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data) +{ + struct cpufreq_policy *policy = data->policy; + int cpu = cpumask_first(policy->cpus); + struct device *dev = get_cpu_device(cpu); + unsigned long freq_hz, throttled_freq; + struct dev_pm_opp *opp; + + /* + * Synchronize against CPU going offline. + * cpufreq_offline() will get the write lock on policy->rwsem. + */ +retry: + if (unlikely(!down_read_trylock(&policy->rwsem))) { + mutex_lock(&data->throttle_lock); + if (data->cancel_throttle) { + mutex_unlock(&data->throttle_lock); + return; + } + + mutex_unlock(&data->throttle_lock); + + schedule(); + goto retry; + } + /* + * Get the h/w throttled frequency, normalize it using the + * registered opp table and use it to calculate thermal pressure. + */ + freq_hz = qcom_lmh_get_throttle_freq(data); + + opp = dev_pm_opp_find_freq_floor(dev, &freq_hz); + if (IS_ERR(opp) && PTR_ERR(opp) == -ERANGE) + opp = dev_pm_opp_find_freq_ceil(dev, &freq_hz); + + if (IS_ERR(opp)) { + dev_warn_ratelimited(dev, "Can't find the OPP for throttling: %pe!\n", opp); + } else { + throttled_freq = freq_hz / HZ_PER_KHZ; + + /* Update thermal pressure (the boost frequencies are accepted) */ + arch_update_thermal_pressure(policy->cpus, throttled_freq); + + dev_pm_opp_put(opp); + } + + /* + * In the unlikely case policy is unregistered do not enable + * polling or h/w interrupt. + * If we are here, we have the policy->rwsem read lock, + * cancel_throttle can be toggled only with the write lock. + */ + if (data->cancel_throttle) + goto out; + + /* + * If h/w throttled frequency is higher than what cpufreq has requested + * for, then stop polling and switch back to interrupt mechanism. + */ + if (throttled_freq >= qcom_cpufreq_hw_get(cpu)) + enable_irq(data->throttle_irq); + else + mod_delayed_work(system_highpri_wq, &data->throttle_work, + msecs_to_jiffies(10)); + +out: + up_read(&policy->rwsem); +} + +static void qcom_lmh_dcvs_poll(struct work_struct *work) +{ + struct qcom_cpufreq_data *data; + + data = container_of(work, struct qcom_cpufreq_data, throttle_work.work); + qcom_lmh_dcvs_notify(data); +} + +static irqreturn_t qcom_lmh_dcvs_handle_irq(int irq, void *data) +{ + struct qcom_cpufreq_data *c_data = data; + + /* Disable interrupt and enable polling */ + disable_irq_nosync(c_data->throttle_irq); + schedule_delayed_work(&c_data->throttle_work, 0); + + writel_relaxed(GT_IRQ_STATUS, + c_data->base + c_data->soc_data->reg_intr_clr); + + return IRQ_HANDLED; +} + +static const struct qcom_cpufreq_soc_data qcom_soc_data = { + .reg_enable = 0x0, + .reg_dcvs_ctrl = 0xbc, + .reg_freq_lut = 0x110, + .reg_volt_lut = 0x114, + .reg_current_vote = 0x704, + .reg_perf_state = 0x920, + .lut_row_size = 32, +}; + +static const struct qcom_cpufreq_soc_data epss_soc_data = { + .reg_enable = 0x0, +<<<<<<< +======= + .reg_domain_state = 0x20, +>>>>>>> + .reg_dcvs_ctrl = 0xb0, + .reg_freq_lut = 0x100, + .reg_volt_lut = 0x200, + .reg_intr_clr = 0x308, + .reg_perf_state = 0x320, + .lut_row_size = 4, +}; + +static const struct of_device_id qcom_cpufreq_hw_match[] = { + { .compatible = "qcom,cpufreq-hw", .data = &qcom_soc_data }, + { .compatible = "qcom,cpufreq-epss", .data = &epss_soc_data }, + {} +}; +MODULE_DEVICE_TABLE(of, qcom_cpufreq_hw_match); + +static int qcom_cpufreq_hw_lmh_online(struct cpufreq_policy *policy); + +static int qcom_cpufreq_hw_lmh_init(struct cpufreq_policy *policy, int index) +{ + struct qcom_cpufreq_data *data = policy->driver_data; + struct platform_device *pdev = cpufreq_get_driver_data(); + + /* + * Look for LMh interrupt. If no interrupt line is specified / + * if there is an error, allow cpufreq to be enabled as usual. + */ + data->throttle_irq = platform_get_irq_optional(pdev, index); + if (data->throttle_irq == -ENXIO) + return 0; + if (data->throttle_irq < 0) + return data->throttle_irq; + + mutex_init(&data->throttle_lock); + INIT_DEFERRABLE_WORK(&data->throttle_work, qcom_lmh_dcvs_poll); + + return qcom_cpufreq_hw_lmh_online(policy); +} + +static int qcom_cpufreq_hw_lmh_online(struct cpufreq_policy *policy) +{ + struct qcom_cpufreq_data *data = policy->driver_data; + struct platform_device *pdev = cpufreq_get_driver_data(); + int ret; + + data->cancel_throttle = false; + data->policy = policy; + + snprintf(data->irq_name, sizeof(data->irq_name), "dcvsh-irq-%u", policy->cpu); + ret = request_threaded_irq(data->throttle_irq, NULL, qcom_lmh_dcvs_handle_irq, + IRQF_ONESHOT | IRQF_NO_AUTOEN, data->irq_name, data); + if (ret) { + dev_err(&pdev->dev, "Error registering %s: %d\n", data->irq_name, ret); + return 0; + } + + ret = irq_set_affinity_hint(data->throttle_irq, policy->cpus); + if (ret) + dev_err(&pdev->dev, "Failed to set CPU affinity of %s[%d]\n", + data->irq_name, data->throttle_irq); + + return 0; +} + +static int qcom_cpufreq_hw_lmh_offline(struct cpufreq_policy *policy) +{ + struct qcom_cpufreq_data *data = policy->driver_data; + + if (data->throttle_irq <= 0) + return 0; + + mutex_lock(&data->throttle_lock); + data->cancel_throttle = true; + mutex_unlock(&data->throttle_lock); + + cancel_delayed_work_sync(&data->throttle_work); + irq_set_affinity_hint(data->throttle_irq, NULL); + free_irq(data->throttle_irq, data); + + return 0; +} + +static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) +{ + struct platform_device *pdev = cpufreq_get_driver_data(); + struct device *dev = &pdev->dev; + struct of_phandle_args args; + struct device_node *cpu_np; + struct device *cpu_dev; + struct resource *res; + void __iomem *base; + struct qcom_cpufreq_data *data; + int ret, index; + + cpu_dev = get_cpu_device(policy->cpu); + if (!cpu_dev) { + pr_err("%s: failed to get cpu%d device\n", __func__, + policy->cpu); + return -ENODEV; + } + + cpu_np = of_cpu_device_node_get(policy->cpu); + if (!cpu_np) + return -EINVAL; + + ret = of_parse_phandle_with_args(cpu_np, "qcom,freq-domain", + "#freq-domain-cells", 0, &args); + of_node_put(cpu_np); + if (ret) + return ret; + + index = args.args[0]; + + res = platform_get_resource(pdev, IORESOURCE_MEM, index); + if (!res) { + dev_err(dev, "failed to get mem resource %d\n", index); + return -ENODEV; + } + + if (!request_mem_region(res->start, resource_size(res), res->name)) { + dev_err(dev, "failed to request resource %pR\n", res); + return -EBUSY; + } + + base = ioremap(res->start, resource_size(res)); + if (!base) { + dev_err(dev, "failed to map resource %pR\n", res); + ret = -ENOMEM; + goto release_region; + } + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + ret = -ENOMEM; + goto unmap_base; + } + + data->soc_data = of_device_get_match_data(&pdev->dev); + data->base = base; + data->res = res; + + /* HW should be in enabled state to proceed */ + if (!(readl_relaxed(base + data->soc_data->reg_enable) & 0x1)) { + dev_err(dev, "Domain-%d cpufreq hardware not enabled\n", index); + ret = -ENODEV; + goto error; + } + + if (readl_relaxed(base + data->soc_data->reg_dcvs_ctrl) & 0x1) + data->per_core_dcvs = true; + + qcom_get_related_cpus(index, policy->cpus); + if (cpumask_empty(policy->cpus)) { + dev_err(dev, "Domain-%d failed to get related CPUs\n", index); + ret = -ENOENT; + goto error; + } + + policy->driver_data = data; + policy->dvfs_possible_from_any_cpu = true; + + ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy); + if (ret) { + dev_err(dev, "Domain-%d failed to read LUT\n", index); + goto error; + } + + ret = dev_pm_opp_get_opp_count(cpu_dev); + if (ret <= 0) { + dev_err(cpu_dev, "Failed to add OPPs\n"); + ret = -ENODEV; + goto error; + } + + if (policy_has_boost_freq(policy)) { + ret = cpufreq_enable_boost_support(); + if (ret) + dev_warn(cpu_dev, "failed to enable boost: %d\n", ret); + } + + ret = qcom_cpufreq_hw_lmh_init(policy, index); + if (ret) + goto error; + + return 0; +error: + kfree(data); +unmap_base: + iounmap(base); +release_region: + release_mem_region(res->start, resource_size(res)); + return ret; +} + +static int qcom_cpufreq_hw_cpu_online(struct cpufreq_policy *policy) +{ + return qcom_cpufreq_hw_lmh_online(policy); +} + +static int qcom_cpufreq_hw_cpu_offline(struct cpufreq_policy *policy) +{ + return qcom_cpufreq_hw_lmh_offline(policy); +} + +static int qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy) +{ + struct device *cpu_dev = get_cpu_device(policy->cpu); + struct qcom_cpufreq_data *data = policy->driver_data; + struct resource *res = data->res; + void __iomem *base = data->base; + + dev_pm_opp_remove_all_dynamic(cpu_dev); + dev_pm_opp_of_cpumask_remove_table(policy->related_cpus); + kfree(policy->freq_table); + kfree(data); + iounmap(base); + release_mem_region(res->start, resource_size(res)); + + return 0; +} + +static void qcom_cpufreq_ready(struct cpufreq_policy *policy) +{ + struct qcom_cpufreq_data *data = policy->driver_data; + + if (data->throttle_irq >= 0) + enable_irq(data->throttle_irq); +} + +static struct freq_attr *qcom_cpufreq_hw_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + &cpufreq_freq_attr_scaling_boost_freqs, + NULL +}; + +static struct cpufreq_driver cpufreq_qcom_hw_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK | + CPUFREQ_HAVE_GOVERNOR_PER_POLICY | + CPUFREQ_IS_COOLING_DEV, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = qcom_cpufreq_hw_target_index, + .get = qcom_cpufreq_hw_get, + .init = qcom_cpufreq_hw_cpu_init, + .exit = qcom_cpufreq_hw_cpu_exit, + .online = qcom_cpufreq_hw_cpu_online, + .offline = qcom_cpufreq_hw_cpu_offline, + .register_em = cpufreq_register_em_with_opp, + .fast_switch = qcom_cpufreq_hw_fast_switch, + .name = "qcom-cpufreq-hw", + .attr = qcom_cpufreq_hw_attr, + .ready = qcom_cpufreq_ready, +}; + +static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev) +{ + struct device *cpu_dev; + struct clk *clk; + int ret; + + clk = clk_get(&pdev->dev, "xo"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + xo_rate = clk_get_rate(clk); + clk_put(clk); + + clk = clk_get(&pdev->dev, "alternate"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + cpu_hw_rate = clk_get_rate(clk) / CLK_HW_DIV; + clk_put(clk); + + cpufreq_qcom_hw_driver.driver_data = pdev; + + /* Check for optional interconnect paths on CPU0 */ + cpu_dev = get_cpu_device(0); + if (!cpu_dev) + return -EPROBE_DEFER; + + ret = dev_pm_opp_of_find_icc_paths(cpu_dev, NULL); + if (ret) + return ret; + + ret = cpufreq_register_driver(&cpufreq_qcom_hw_driver); + if (ret) + dev_err(&pdev->dev, "CPUFreq HW driver failed to register\n"); + else + dev_dbg(&pdev->dev, "QCOM CPUFreq HW driver initialized\n"); + + return ret; +} + +static int qcom_cpufreq_hw_driver_remove(struct platform_device *pdev) +{ + return cpufreq_unregister_driver(&cpufreq_qcom_hw_driver); +} + +static struct platform_driver qcom_cpufreq_hw_driver = { + .probe = qcom_cpufreq_hw_driver_probe, + .remove = qcom_cpufreq_hw_driver_remove, + .driver = { + .name = "qcom-cpufreq-hw", + .of_match_table = qcom_cpufreq_hw_match, + }, +}; + +static int __init qcom_cpufreq_hw_init(void) +{ + return platform_driver_register(&qcom_cpufreq_hw_driver); +} +postcore_initcall(qcom_cpufreq_hw_init); + +static void __exit qcom_cpufreq_hw_exit(void) +{ + platform_driver_unregister(&qcom_cpufreq_hw_driver); +} +module_exit(qcom_cpufreq_hw_exit); + +MODULE_DESCRIPTION("QCOM CPUFREQ HW Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/rr-cache/dcc2a8ae13e4a4952bbce1a8c9e7d7f51d2fd633/postimage b/rr-cache/dcc2a8ae13e4a4952bbce1a8c9e7d7f51d2fd633/postimage new file mode 100644 index 0000000..30f0e79 --- /dev/null +++ b/rr-cache/dcc2a8ae13e4a4952bbce1a8c9e7d7f51d2fd633/postimage @@ -0,0 +1,752 @@ +# SPDX-License-Identifier: GPL-2.0-only +config KRAIT_CLOCKS + bool + select KRAIT_L2_ACCESSORS + +config QCOM_GDSC + bool + select PM_GENERIC_DOMAINS if PM + +config QCOM_RPMCC + bool + +menuconfig COMMON_CLK_QCOM + tristate "Support for Qualcomm's clock controllers" + depends on OF + depends on ARCH_QCOM || COMPILE_TEST + select RATIONAL + select REGMAP_MMIO + select RESET_CONTROLLER + +if COMMON_CLK_QCOM + +config QCOM_A53PLL + tristate "MSM8916 A53 PLL" + help + Support for the A53 PLL on MSM8916 devices. It provides + the CPU with frequencies above 1GHz. + Say Y if you want to support higher CPU frequencies on MSM8916 + devices. + +config QCOM_A7PLL + tristate "A7 PLL driver for SDX55 and SDX65" + help + Support for the A7 PLL on SDX55 and SDX65 devices. It provides the CPU with + frequencies above 1GHz. + Say Y if you want to support higher CPU frequencies on SDX55 and SDX65 + devices. + +config QCOM_CLK_APCS_MSM8916 + tristate "MSM8916 APCS Clock Controller" + depends on QCOM_APCS_IPC || COMPILE_TEST + help + Support for the APCS Clock Controller on msm8916 devices. The + APCS is managing the mux and divider which feeds the CPUs. + Say Y if you want to support CPU frequency scaling on devices + such as msm8916. + +config QCOM_CLK_APCC_MSM8996 + tristate "MSM8996 CPU Clock Controller" + select QCOM_KRYO_L2_ACCESSORS + depends on ARM64 + depends on COMMON_CLK_QCOM + help + Support for the CPU clock controller on msm8996 devices. + Say Y if you want to support CPU clock scaling using CPUfreq + drivers for dynamic power management. + +config QCOM_CLK_APCS_SDX55 + tristate "SDX55 and SDX65 APCS Clock Controller" + depends on QCOM_APCS_IPC || COMPILE_TEST + help + Support for the APCS Clock Controller on SDX55, SDX65 platforms. The + APCS is managing the mux and divider which feeds the CPUs. + Say Y if you want to support CPU frequency scaling on devices + such as SDX55, SDX65. + +config QCOM_CLK_RPM + tristate "RPM based Clock Controller" + depends on MFD_QCOM_RPM + select QCOM_RPMCC + help + The RPM (Resource Power Manager) is a dedicated hardware engine for + managing the shared SoC resources in order to keep the lowest power + profile. It communicates with other hardware subsystems via shared + memory and accepts clock requests, aggregates the requests and turns + the clocks on/off or scales them on demand. + Say Y if you want to support the clocks exposed by the RPM on + platforms such as apq8064, msm8660, msm8960 etc. + +config QCOM_CLK_SMD_RPM + tristate "RPM over SMD based Clock Controller" + depends on QCOM_SMD_RPM + select QCOM_RPMCC + help + The RPM (Resource Power Manager) is a dedicated hardware engine for + managing the shared SoC resources in order to keep the lowest power + profile. It communicates with other hardware subsystems via shared + memory and accepts clock requests, aggregates the requests and turns + the clocks on/off or scales them on demand. + Say Y if you want to support the clocks exposed by the RPM on + platforms such as apq8016, apq8084, msm8974 etc. + +config QCOM_CLK_RPMH + tristate "RPMh Clock Driver" + depends on QCOM_RPMH + help + RPMh manages shared resources on some Qualcomm Technologies, Inc. + SoCs. It accepts requests from other hardware subsystems via RSC. + Say Y if you want to support the clocks exposed by RPMh on + platforms such as SDM845. + +config APQ_GCC_8084 + tristate "APQ8084 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on apq8084 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, SATA, PCIe, etc. + +config APQ_MMCC_8084 + tristate "APQ8084 Multimedia Clock Controller" + select APQ_GCC_8084 + select QCOM_GDSC + help + Support for the multimedia clock controller on apq8084 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config IPQ_APSS_PLL + tristate "IPQ APSS PLL" + help + Support for APSS PLL on ipq devices. The APSS PLL is the main + clock that feeds the CPUs on ipq based devices. + Say Y if you want to support CPU frequency scaling on ipq based + devices. + +config IPQ_APSS_6018 + tristate "IPQ APSS Clock Controller" + select IPQ_APSS_PLL + depends on QCOM_APCS_IPC || COMPILE_TEST + help + Support for APSS clock controller on IPQ platforms. The + APSS clock controller manages the Mux and enable block that feeds the + CPUs. + Say Y if you want to support CPU frequency scaling on + ipq based devices. + +config IPQ_GCC_4019 + tristate "IPQ4019 Global Clock Controller" + help + Support for the global clock controller on ipq4019 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. + +config IPQ_GCC_6018 + tristate "IPQ6018 Global Clock Controller" + help + Support for global clock controller on ipq6018 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. Select this for the root clock + of ipq6018. + +config IPQ_GCC_806X + tristate "IPQ806x Global Clock Controller" + help + Support for the global clock controller on ipq806x devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. + +config IPQ_LCC_806X + tristate "IPQ806x LPASS Clock Controller" + select IPQ_GCC_806X + help + Support for the LPASS clock controller on ipq806x devices. + Say Y if you want to use audio devices such as i2s, pcm, + S/PDIF, etc. + +config IPQ_GCC_8074 + tristate "IPQ8074 Global Clock Controller" + help + Support for global clock controller on ipq8074 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. Select this for the root clock + of ipq8074. + +config MSM_GCC_8660 + tristate "MSM8660 Global Clock Controller" + help + Support for the global clock controller on msm8660 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. + +config MSM_GCC_8916 + tristate "MSM8916 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8916 devices. + Say Y if you want to use devices such as UART, SPI i2c, USB, + SD/eMMC, display, graphics, camera etc. + +config MSM_GCC_8939 + tristate "MSM8939 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8939 devices. + Say Y if you want to use devices such as UART, SPI i2c, USB, + SD/eMMC, display, graphics, camera etc. + +config MSM_GCC_8960 + tristate "APQ8064/MSM8960 Global Clock Controller" + help + Support for the global clock controller on apq8064/msm8960 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, SATA, PCIe, etc. + +config MSM_LCC_8960 + tristate "APQ8064/MSM8960 LPASS Clock Controller" + select MSM_GCC_8960 + help + Support for the LPASS clock controller on apq8064/msm8960 devices. + Say Y if you want to use audio devices such as i2s, pcm, + SLIMBus, etc. + +config MDM_GCC_9607 + tristate "MDM9607 Global Clock Controller" + help + Support for the global clock controller on mdm9607 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + I2C, USB, SD/eMMC, etc. + +config MDM_GCC_9615 + tristate "MDM9615 Global Clock Controller" + help + Support for the global clock controller on mdm9615 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. + +config MDM_LCC_9615 + tristate "MDM9615 LPASS Clock Controller" + select MDM_GCC_9615 + help + Support for the LPASS clock controller on mdm9615 devices. + Say Y if you want to use audio devices such as i2s, pcm, + SLIMBus, etc. + +config MSM_MMCC_8960 + tristate "MSM8960 Multimedia Clock Controller" + select MSM_GCC_8960 + help + Support for the multimedia clock controller on msm8960 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config MSM_GCC_8953 + tristate "MSM8953 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8953 devices. + Say Y if you want to use devices such as UART, SPI i2c, USB, + SD/eMMC, display, graphics, camera etc. + +config MSM_GCC_8974 + tristate "MSM8974 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8974 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, SATA, PCIe, etc. + +config MSM_MMCC_8974 + tristate "MSM8974 Multimedia Clock Controller" + select MSM_GCC_8974 + select QCOM_GDSC + help + Support for the multimedia clock controller on msm8974 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config MSM_GCC_8976 + tristate "MSM8956/76 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8956/76 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, SATA, PCIe, etc. + +config MSM_MMCC_8994 + tristate "MSM8994 Multimedia Clock Controller" + select MSM_GCC_8994 + select QCOM_GDSC + help + Support for the multimedia clock controller on msm8994 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config MSM_GCC_8994 + tristate "MSM8994 Global Clock Controller" + help + Support for the global clock controller on msm8994 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, UFS, SD/eMMC, PCIe, etc. + +config MSM_GCC_8996 + tristate "MSM8996 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8996 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, UFS, SD/eMMC, PCIe, etc. + +config MSM_MMCC_8996 + tristate "MSM8996 Multimedia Clock Controller" + select MSM_GCC_8996 + select QCOM_GDSC + help + Support for the multimedia clock controller on msm8996 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config MSM_GCC_8998 + tristate "MSM8998 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8998 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, UFS, SD/eMMC, PCIe, etc. + +config MSM_GPUCC_8998 + tristate "MSM8998 Graphics Clock Controller" + select MSM_GCC_8998 + select QCOM_GDSC + help + Support for the graphics clock controller on MSM8998 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config MSM_MMCC_8998 + tristate "MSM8998 Multimedia Clock Controller" + select MSM_GCC_8998 + select QCOM_GDSC + help + Support for the multimedia clock controller on msm8998 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config QCM_GCC_2290 + tristate "QCM2290 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on QCM2290 devices. + Say Y if you want to use multimedia devices or peripheral + devices such as UART, SPI, I2C, USB, SD/eMMC etc. + +config QCM_DISPCC_2290 + tristate "QCM2290 Display Clock Controller" + select QCM_GCC_2290 + help + Support for the display clock controller on Qualcomm Technologies, Inc + QCM2290 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config QCS_GCC_404 + tristate "QCS404 Global Clock Controller" + help + Support for the global clock controller on QCS404 devices. + Say Y if you want to use multimedia devices or peripheral + devices such as UART, SPI, I2C, USB, SD/eMMC, PCIe etc. + +config SC_CAMCC_7180 + tristate "SC7180 Camera Clock Controller" + select SC_GCC_7180 + help + Support for the camera clock controller on Qualcomm Technologies, Inc + SC7180 devices. + Say Y if you want to support camera devices and functionality such as + capturing pictures. + +config SC_CAMCC_7280 + tristate "SC7280 Camera Clock Controller" + select SC_GCC_7280 + help + Support for the camera clock controller on Qualcomm Technologies, Inc + SC7280 devices. + Say Y if you want to support camera devices and functionality such as + capturing pictures. + +config SC_DISPCC_7180 + tristate "SC7180 Display Clock Controller" + select SC_GCC_7180 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SC7180 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config SC_DISPCC_7280 + tristate "SC7280 Display Clock Controller" + select SC_GCC_7280 + help + Support for the display clock controller on Qualcomm Technologies, Inc. + SC7280 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config SC_GCC_7180 + tristate "SC7180 Global Clock Controller" + select QCOM_GDSC + depends on COMMON_CLK_QCOM + help + Support for the global clock controller on SC7180 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + I2C, USB, UFS, SDCC, etc. + +config SC_GCC_7280 + tristate "SC7280 Global Clock Controller" + select QCOM_GDSC + depends on COMMON_CLK_QCOM + help + Support for the global clock controller on SC7280 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + I2C, USB, UFS, SDCC, PCIe etc. + +config SC_GCC_8180X + tristate "SC8180X Global Clock Controller" + select QCOM_GDSC + depends on COMMON_CLK_QCOM + help + Support for the global clock controller on SC8180X devices. + Say Y if you want to use peripheral devices such as UART, SPI, + I2C, USB, UFS, SDCC, etc. + +config SC_GPUCC_7180 + tristate "SC7180 Graphics Clock Controller" + select SC_GCC_7180 + help + Support for the graphics clock controller on SC7180 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SC_GPUCC_7280 + tristate "SC7280 Graphics Clock Controller" + select SC_GCC_7280 + help + Support for the graphics clock controller on SC7280 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SC_LPASSCC_7280 + tristate "SC7280 Low Power Audio Subsystem (LPASS) Clock Controller" + select SC_GCC_7280 + help + Support for the LPASS clock controller on SC7280 devices. + Say Y if you want to use the LPASS branch clocks of the LPASS clock + controller to reset the LPASS subsystem. + +config SC_LPASS_CORECC_7180 + tristate "SC7180 LPASS Core Clock Controller" + select SC_GCC_7180 + help + Support for the LPASS(Low Power Audio Subsystem) core clock controller + on SC7180 devices. + Say Y if you want to use LPASS clocks and power domains of the LPASS + core clock controller. + +config SC_MSS_7180 + tristate "SC7180 Modem Clock Controller" + select SC_GCC_7180 + help + Support for the Modem Subsystem clock controller on Qualcomm + Technologies, Inc on SC7180 devices. + Say Y if you want to use the Modem branch clocks of the Modem + subsystem clock controller to reset the MSS subsystem. + +config SC_VIDEOCC_7180 + tristate "SC7180 Video Clock Controller" + select SC_GCC_7180 + help + Support for the video clock controller on SC7180 devices. + Say Y if you want to support video devices and functionality such as + video encode and decode. + +config SC_VIDEOCC_7280 + tristate "SC7280 Video Clock Controller" + select SC_GCC_7280 + help + Support for the video clock controller on SC7280 devices. + Say Y if you want to support video devices and functionality such as + video encode and decode. + +config SDM_CAMCC_845 + tristate "SDM845 Camera Clock Controller" + select SDM_GCC_845 + help + Support for the camera clock controller on SDM845 devices. + Say Y if you want to support camera devices and camera functionality. + +config SDM_GCC_660 + tristate "SDM660 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SDM660 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2C, USB, UFS, SDDC, PCIe, etc. + +config SDM_MMCC_660 + tristate "SDM660 Multimedia Clock Controller" + select SDM_GCC_660 + select QCOM_GDSC + help + Support for the multimedia clock controller on SDM660 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config SDM_GPUCC_660 + tristate "SDM660 Graphics Clock Controller" + select SDM_GCC_660 + select QCOM_GDSC + help + Support for the graphics clock controller on SDM630/636/660 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics + +config QCS_TURING_404 + tristate "QCS404 Turing Clock Controller" + help + Support for the Turing Clock Controller on QCS404, provides clocks + and resets for the Turing subsystem. + +config QCS_Q6SSTOP_404 + tristate "QCS404 Q6SSTOP Clock Controller" + select QCS_GCC_404 + help + Support for the Q6SSTOP clock controller on QCS404 devices. + Say Y if you want to use the Q6SSTOP branch clocks of the WCSS clock + controller to reset the Q6SSTOP subsystem. + +config SDM_GCC_845 + tristate "SDM845 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SDM845 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2C, USB, UFS, SDDC, PCIe, etc. + +config SDM_GPUCC_845 + tristate "SDM845 Graphics Clock Controller" + select SDM_GCC_845 + help + Support for the graphics clock controller on SDM845 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SDM_VIDEOCC_845 + tristate "SDM845 Video Clock Controller" + select SDM_GCC_845 + select QCOM_GDSC + help + Support for the video clock controller on SDM845 devices. + Say Y if you want to support video devices and functionality such as + video encode and decode. + +config SDM_DISPCC_845 + tristate "SDM845 Display Clock Controller" + select SDM_GCC_845 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SDM845 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config SDM_LPASSCC_845 + tristate "SDM845 Low Power Audio Subsystem (LPAAS) Clock Controller" + select SDM_GCC_845 + help + Support for the LPASS clock controller on SDM845 devices. + Say Y if you want to use the LPASS branch clocks of the LPASS clock + controller to reset the LPASS subsystem. + +config SDX_GCC_55 + tristate "SDX55 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SDX55 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SDX_GCC_65 + tristate "SDX65 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SDX65 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_CAMCC_8250 + tristate "SM8250 Camera Clock Controller" + select SM_GCC_8250 + help + Support for the camera clock controller on SM8250 devices. + Say Y if you want to support camera devices and camera functionality. + +config SM_DISPCC_6125 + tristate "SM6125 Display Clock Controller" + depends on SM_GCC_6125 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SM6125 devices. + Say Y if you want to support display devices and functionality such as + splash screen + +config SM_DISPCC_8250 + tristate "SM8150 and SM8250 Display Clock Controller" + depends on SM_GCC_8150 || SM_GCC_8250 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SM8150 and SM8250 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config SM_DISPCC_6350 + tristate "SM6350 Display Clock Controller" + depends on SM_GCC_6350 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SM6350 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config SM_GCC_6115 + tristate "SM6115 and SM4250 Global Clock Controller" + help + Support for the global clock controller on SM6115 and SM4250 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2C, USB, UFS, SDDC, PCIe, etc. + +config SM_GCC_6125 + tristate "SM6125 Global Clock Controller" + help + Support for the global clock controller on SM6125 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GCC_6350 + tristate "SM6350 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SM6350 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GCC_8150 + tristate "SM8150 Global Clock Controller" + help + Support for the global clock controller on SM8150 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GCC_8250 + tristate "SM8250 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SM8250 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GCC_8350 + tristate "SM8350 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SM8350 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GCC_8450 + tristate "SM8450 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SM8450 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GPUCC_6350 + tristate "SM6350 Graphics Clock Controller" + select SM_GCC_6350 + help + Support for the graphics clock controller on SM6350 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SM_GPUCC_8150 + tristate "SM8150 Graphics Clock Controller" + select SM_GCC_8150 + help + Support for the graphics clock controller on SM8150 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SM_GPUCC_8250 + tristate "SM8250 Graphics Clock Controller" + select SM_GCC_8250 + help + Support for the graphics clock controller on SM8250 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SM_VIDEOCC_8150 + tristate "SM8150 Video Clock Controller" + select SM_GCC_8150 + select QCOM_GDSC + help + Support for the video clock controller on SM8150 devices. + Say Y if you want to support video devices and functionality such as + video encode and decode. + +config SM_VIDEOCC_8250 + tristate "SM8250 Video Clock Controller" + select SM_GCC_8250 + select QCOM_GDSC + help + Support for the video clock controller on SM8250 devices. + Say Y if you want to support video devices and functionality such as + video encode and decode. + +config SPMI_PMIC_CLKDIV + tristate "SPMI PMIC clkdiv Support" + depends on SPMI || COMPILE_TEST + help + This driver supports the clkdiv functionality on the Qualcomm + Technologies, Inc. SPMI PMIC. It configures the frequency of + clkdiv outputs of the PMIC. These clocks are typically wired + through alternate functions on GPIO pins. + +config QCOM_HFPLL + tristate "High-Frequency PLL (HFPLL) Clock Controller" + help + Support for the high-frequency PLLs present on Qualcomm devices. + Say Y if you want to support CPU frequency scaling on devices + such as MSM8974, APQ8084, etc. + +config KPSS_XCC + tristate "KPSS Clock Controller" + help + Support for the Krait ACC and GCC clock controllers. Say Y + if you want to support CPU frequency scaling on devices such + as MSM8960, APQ8064, etc. + +config KRAITCC + tristate "Krait Clock Controller" + depends on ARM + select KRAIT_CLOCKS + help + Support for the Krait CPU clocks on Qualcomm devices. + Say Y if you want to support CPU frequency scaling. + +config CLK_GFM_LPASS_SM8250 + tristate "SM8250 GFM LPASS Clocks" + help + Support for the Glitch Free Mux (GFM) Low power audio + subsystem (LPASS) clocks found on SM8250 SoCs. + +endif diff --git a/rr-cache/dcc2a8ae13e4a4952bbce1a8c9e7d7f51d2fd633/preimage b/rr-cache/dcc2a8ae13e4a4952bbce1a8c9e7d7f51d2fd633/preimage new file mode 100644 index 0000000..516408f --- /dev/null +++ b/rr-cache/dcc2a8ae13e4a4952bbce1a8c9e7d7f51d2fd633/preimage @@ -0,0 +1,761 @@ +# SPDX-License-Identifier: GPL-2.0-only +config KRAIT_CLOCKS + bool + select KRAIT_L2_ACCESSORS + +config QCOM_GDSC + bool + select PM_GENERIC_DOMAINS if PM + +config QCOM_RPMCC + bool + +menuconfig COMMON_CLK_QCOM + tristate "Support for Qualcomm's clock controllers" + depends on OF + depends on ARCH_QCOM || COMPILE_TEST + select RATIONAL + select REGMAP_MMIO + select RESET_CONTROLLER + +if COMMON_CLK_QCOM + +config QCOM_A53PLL + tristate "MSM8916 A53 PLL" + help + Support for the A53 PLL on MSM8916 devices. It provides + the CPU with frequencies above 1GHz. + Say Y if you want to support higher CPU frequencies on MSM8916 + devices. + +config QCOM_A7PLL + tristate "A7 PLL driver for SDX55 and SDX65" + help + Support for the A7 PLL on SDX55 and SDX65 devices. It provides the CPU with + frequencies above 1GHz. + Say Y if you want to support higher CPU frequencies on SDX55 and SDX65 + devices. + +config QCOM_CLK_APCS_MSM8916 + tristate "MSM8916 APCS Clock Controller" + depends on QCOM_APCS_IPC || COMPILE_TEST + help + Support for the APCS Clock Controller on msm8916 devices. The + APCS is managing the mux and divider which feeds the CPUs. + Say Y if you want to support CPU frequency scaling on devices + such as msm8916. + +config QCOM_CLK_APCC_MSM8996 + tristate "MSM8996 CPU Clock Controller" +<<<<<<< + depends on ARM64 + depends on COMMON_CLK_QCOM + select QCOM_KRYO_L2_ACCESSORS + help + Support for the CPU clock controller on msm8996 devices. + Say Y if you want to support CPU clock scaling using CPUfreq + drivers for dyanmic power management. +======= + select QCOM_KRYO_L2_ACCESSORS + depends on ARM64 + help + Support for the CPU clock controller on msm8996 devices. + Say Y if you want to support CPU clock scaling using CPUfreq + drivers for dynamic power management. + +config QCOM_CLK_APCS_SDX55 + tristate "SDX55 and SDX65 APCS Clock Controller" + depends on QCOM_APCS_IPC || COMPILE_TEST + help + Support for the APCS Clock Controller on SDX55, SDX65 platforms. The + APCS is managing the mux and divider which feeds the CPUs. + Say Y if you want to support CPU frequency scaling on devices + such as SDX55, SDX65. +>>>>>>> + +config QCOM_CLK_RPM + tristate "RPM based Clock Controller" + depends on MFD_QCOM_RPM + select QCOM_RPMCC + help + The RPM (Resource Power Manager) is a dedicated hardware engine for + managing the shared SoC resources in order to keep the lowest power + profile. It communicates with other hardware subsystems via shared + memory and accepts clock requests, aggregates the requests and turns + the clocks on/off or scales them on demand. + Say Y if you want to support the clocks exposed by the RPM on + platforms such as apq8064, msm8660, msm8960 etc. + +config QCOM_CLK_SMD_RPM + tristate "RPM over SMD based Clock Controller" + depends on QCOM_SMD_RPM + select QCOM_RPMCC + help + The RPM (Resource Power Manager) is a dedicated hardware engine for + managing the shared SoC resources in order to keep the lowest power + profile. It communicates with other hardware subsystems via shared + memory and accepts clock requests, aggregates the requests and turns + the clocks on/off or scales them on demand. + Say Y if you want to support the clocks exposed by the RPM on + platforms such as apq8016, apq8084, msm8974 etc. + +config QCOM_CLK_RPMH + tristate "RPMh Clock Driver" + depends on QCOM_RPMH + help + RPMh manages shared resources on some Qualcomm Technologies, Inc. + SoCs. It accepts requests from other hardware subsystems via RSC. + Say Y if you want to support the clocks exposed by RPMh on + platforms such as SDM845. + +config APQ_GCC_8084 + tristate "APQ8084 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on apq8084 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, SATA, PCIe, etc. + +config APQ_MMCC_8084 + tristate "APQ8084 Multimedia Clock Controller" + select APQ_GCC_8084 + select QCOM_GDSC + help + Support for the multimedia clock controller on apq8084 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config IPQ_APSS_PLL + tristate "IPQ APSS PLL" + help + Support for APSS PLL on ipq devices. The APSS PLL is the main + clock that feeds the CPUs on ipq based devices. + Say Y if you want to support CPU frequency scaling on ipq based + devices. + +config IPQ_APSS_6018 + tristate "IPQ APSS Clock Controller" + select IPQ_APSS_PLL + depends on QCOM_APCS_IPC || COMPILE_TEST + help + Support for APSS clock controller on IPQ platforms. The + APSS clock controller manages the Mux and enable block that feeds the + CPUs. + Say Y if you want to support CPU frequency scaling on + ipq based devices. + +config IPQ_GCC_4019 + tristate "IPQ4019 Global Clock Controller" + help + Support for the global clock controller on ipq4019 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. + +config IPQ_GCC_6018 + tristate "IPQ6018 Global Clock Controller" + help + Support for global clock controller on ipq6018 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. Select this for the root clock + of ipq6018. + +config IPQ_GCC_806X + tristate "IPQ806x Global Clock Controller" + help + Support for the global clock controller on ipq806x devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. + +config IPQ_LCC_806X + tristate "IPQ806x LPASS Clock Controller" + select IPQ_GCC_806X + help + Support for the LPASS clock controller on ipq806x devices. + Say Y if you want to use audio devices such as i2s, pcm, + S/PDIF, etc. + +config IPQ_GCC_8074 + tristate "IPQ8074 Global Clock Controller" + help + Support for global clock controller on ipq8074 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. Select this for the root clock + of ipq8074. + +config MSM_GCC_8660 + tristate "MSM8660 Global Clock Controller" + help + Support for the global clock controller on msm8660 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. + +config MSM_GCC_8916 + tristate "MSM8916 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8916 devices. + Say Y if you want to use devices such as UART, SPI i2c, USB, + SD/eMMC, display, graphics, camera etc. + +config MSM_GCC_8939 + tristate "MSM8939 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8939 devices. + Say Y if you want to use devices such as UART, SPI i2c, USB, + SD/eMMC, display, graphics, camera etc. + +config MSM_GCC_8960 + tristate "APQ8064/MSM8960 Global Clock Controller" + help + Support for the global clock controller on apq8064/msm8960 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, SATA, PCIe, etc. + +config MSM_LCC_8960 + tristate "APQ8064/MSM8960 LPASS Clock Controller" + select MSM_GCC_8960 + help + Support for the LPASS clock controller on apq8064/msm8960 devices. + Say Y if you want to use audio devices such as i2s, pcm, + SLIMBus, etc. + +config MDM_GCC_9607 + tristate "MDM9607 Global Clock Controller" + help + Support for the global clock controller on mdm9607 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + I2C, USB, SD/eMMC, etc. + +config MDM_GCC_9615 + tristate "MDM9615 Global Clock Controller" + help + Support for the global clock controller on mdm9615 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. + +config MDM_LCC_9615 + tristate "MDM9615 LPASS Clock Controller" + select MDM_GCC_9615 + help + Support for the LPASS clock controller on mdm9615 devices. + Say Y if you want to use audio devices such as i2s, pcm, + SLIMBus, etc. + +config MSM_MMCC_8960 + tristate "MSM8960 Multimedia Clock Controller" + select MSM_GCC_8960 + help + Support for the multimedia clock controller on msm8960 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config MSM_GCC_8953 + tristate "MSM8953 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8953 devices. + Say Y if you want to use devices such as UART, SPI i2c, USB, + SD/eMMC, display, graphics, camera etc. + +config MSM_GCC_8974 + tristate "MSM8974 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8974 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, SATA, PCIe, etc. + +config MSM_MMCC_8974 + tristate "MSM8974 Multimedia Clock Controller" + select MSM_GCC_8974 + select QCOM_GDSC + help + Support for the multimedia clock controller on msm8974 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config MSM_GCC_8976 + tristate "MSM8956/76 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8956/76 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, SATA, PCIe, etc. + +config MSM_MMCC_8994 + tristate "MSM8994 Multimedia Clock Controller" + select MSM_GCC_8994 + select QCOM_GDSC + help + Support for the multimedia clock controller on msm8994 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config MSM_GCC_8994 + tristate "MSM8994 Global Clock Controller" + help + Support for the global clock controller on msm8994 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, UFS, SD/eMMC, PCIe, etc. + +config MSM_GCC_8996 + tristate "MSM8996 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8996 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, UFS, SD/eMMC, PCIe, etc. + +config MSM_MMCC_8996 + tristate "MSM8996 Multimedia Clock Controller" + select MSM_GCC_8996 + select QCOM_GDSC + help + Support for the multimedia clock controller on msm8996 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config MSM_GCC_8998 + tristate "MSM8998 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8998 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, UFS, SD/eMMC, PCIe, etc. + +config MSM_GPUCC_8998 + tristate "MSM8998 Graphics Clock Controller" + select MSM_GCC_8998 + select QCOM_GDSC + help + Support for the graphics clock controller on MSM8998 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config MSM_MMCC_8998 + tristate "MSM8998 Multimedia Clock Controller" + select MSM_GCC_8998 + select QCOM_GDSC + help + Support for the multimedia clock controller on msm8998 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config QCM_GCC_2290 + tristate "QCM2290 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on QCM2290 devices. + Say Y if you want to use multimedia devices or peripheral + devices such as UART, SPI, I2C, USB, SD/eMMC etc. + +config QCM_DISPCC_2290 + tristate "QCM2290 Display Clock Controller" + select QCM_GCC_2290 + help + Support for the display clock controller on Qualcomm Technologies, Inc + QCM2290 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config QCS_GCC_404 + tristate "QCS404 Global Clock Controller" + help + Support for the global clock controller on QCS404 devices. + Say Y if you want to use multimedia devices or peripheral + devices such as UART, SPI, I2C, USB, SD/eMMC, PCIe etc. + +config SC_CAMCC_7180 + tristate "SC7180 Camera Clock Controller" + select SC_GCC_7180 + help + Support for the camera clock controller on Qualcomm Technologies, Inc + SC7180 devices. + Say Y if you want to support camera devices and functionality such as + capturing pictures. + +config SC_CAMCC_7280 + tristate "SC7280 Camera Clock Controller" + select SC_GCC_7280 + help + Support for the camera clock controller on Qualcomm Technologies, Inc + SC7280 devices. + Say Y if you want to support camera devices and functionality such as + capturing pictures. + +config SC_DISPCC_7180 + tristate "SC7180 Display Clock Controller" + select SC_GCC_7180 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SC7180 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config SC_DISPCC_7280 + tristate "SC7280 Display Clock Controller" + select SC_GCC_7280 + help + Support for the display clock controller on Qualcomm Technologies, Inc. + SC7280 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config SC_GCC_7180 + tristate "SC7180 Global Clock Controller" + select QCOM_GDSC + depends on COMMON_CLK_QCOM + help + Support for the global clock controller on SC7180 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + I2C, USB, UFS, SDCC, etc. + +config SC_GCC_7280 + tristate "SC7280 Global Clock Controller" + select QCOM_GDSC + depends on COMMON_CLK_QCOM + help + Support for the global clock controller on SC7280 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + I2C, USB, UFS, SDCC, PCIe etc. + +config SC_GCC_8180X + tristate "SC8180X Global Clock Controller" + select QCOM_GDSC + depends on COMMON_CLK_QCOM + help + Support for the global clock controller on SC8180X devices. + Say Y if you want to use peripheral devices such as UART, SPI, + I2C, USB, UFS, SDCC, etc. + +config SC_GPUCC_7180 + tristate "SC7180 Graphics Clock Controller" + select SC_GCC_7180 + help + Support for the graphics clock controller on SC7180 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SC_GPUCC_7280 + tristate "SC7280 Graphics Clock Controller" + select SC_GCC_7280 + help + Support for the graphics clock controller on SC7280 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SC_LPASSCC_7280 + tristate "SC7280 Low Power Audio Subsystem (LPASS) Clock Controller" + select SC_GCC_7280 + help + Support for the LPASS clock controller on SC7280 devices. + Say Y if you want to use the LPASS branch clocks of the LPASS clock + controller to reset the LPASS subsystem. + +config SC_LPASS_CORECC_7180 + tristate "SC7180 LPASS Core Clock Controller" + select SC_GCC_7180 + help + Support for the LPASS(Low Power Audio Subsystem) core clock controller + on SC7180 devices. + Say Y if you want to use LPASS clocks and power domains of the LPASS + core clock controller. + +config SC_MSS_7180 + tristate "SC7180 Modem Clock Controller" + select SC_GCC_7180 + help + Support for the Modem Subsystem clock controller on Qualcomm + Technologies, Inc on SC7180 devices. + Say Y if you want to use the Modem branch clocks of the Modem + subsystem clock controller to reset the MSS subsystem. + +config SC_VIDEOCC_7180 + tristate "SC7180 Video Clock Controller" + select SC_GCC_7180 + help + Support for the video clock controller on SC7180 devices. + Say Y if you want to support video devices and functionality such as + video encode and decode. + +config SC_VIDEOCC_7280 + tristate "SC7280 Video Clock Controller" + select SC_GCC_7280 + help + Support for the video clock controller on SC7280 devices. + Say Y if you want to support video devices and functionality such as + video encode and decode. + +config SDM_CAMCC_845 + tristate "SDM845 Camera Clock Controller" + select SDM_GCC_845 + help + Support for the camera clock controller on SDM845 devices. + Say Y if you want to support camera devices and camera functionality. + +config SDM_GCC_660 + tristate "SDM660 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SDM660 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2C, USB, UFS, SDDC, PCIe, etc. + +config SDM_MMCC_660 + tristate "SDM660 Multimedia Clock Controller" + select SDM_GCC_660 + select QCOM_GDSC + help + Support for the multimedia clock controller on SDM660 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. + +config SDM_GPUCC_660 + tristate "SDM660 Graphics Clock Controller" + select SDM_GCC_660 + select QCOM_GDSC + help + Support for the graphics clock controller on SDM630/636/660 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics + +config QCS_TURING_404 + tristate "QCS404 Turing Clock Controller" + help + Support for the Turing Clock Controller on QCS404, provides clocks + and resets for the Turing subsystem. + +config QCS_Q6SSTOP_404 + tristate "QCS404 Q6SSTOP Clock Controller" + select QCS_GCC_404 + help + Support for the Q6SSTOP clock controller on QCS404 devices. + Say Y if you want to use the Q6SSTOP branch clocks of the WCSS clock + controller to reset the Q6SSTOP subsystem. + +config SDM_GCC_845 + tristate "SDM845 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SDM845 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2C, USB, UFS, SDDC, PCIe, etc. + +config SDM_GPUCC_845 + tristate "SDM845 Graphics Clock Controller" + select SDM_GCC_845 + help + Support for the graphics clock controller on SDM845 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SDM_VIDEOCC_845 + tristate "SDM845 Video Clock Controller" + select SDM_GCC_845 + select QCOM_GDSC + help + Support for the video clock controller on SDM845 devices. + Say Y if you want to support video devices and functionality such as + video encode and decode. + +config SDM_DISPCC_845 + tristate "SDM845 Display Clock Controller" + select SDM_GCC_845 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SDM845 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config SDM_LPASSCC_845 + tristate "SDM845 Low Power Audio Subsystem (LPAAS) Clock Controller" + select SDM_GCC_845 + help + Support for the LPASS clock controller on SDM845 devices. + Say Y if you want to use the LPASS branch clocks of the LPASS clock + controller to reset the LPASS subsystem. + +config SDX_GCC_55 + tristate "SDX55 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SDX55 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SDX_GCC_65 + tristate "SDX65 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SDX65 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_CAMCC_8250 + tristate "SM8250 Camera Clock Controller" + select SM_GCC_8250 + help + Support for the camera clock controller on SM8250 devices. + Say Y if you want to support camera devices and camera functionality. + +config SM_DISPCC_6125 + tristate "SM6125 Display Clock Controller" + depends on SM_GCC_6125 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SM6125 devices. + Say Y if you want to support display devices and functionality such as + splash screen + +config SM_DISPCC_8250 + tristate "SM8150 and SM8250 Display Clock Controller" + depends on SM_GCC_8150 || SM_GCC_8250 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SM8150 and SM8250 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config SM_DISPCC_6350 + tristate "SM6350 Display Clock Controller" + depends on SM_GCC_6350 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SM6350 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config SM_GCC_6115 + tristate "SM6115 and SM4250 Global Clock Controller" + help + Support for the global clock controller on SM6115 and SM4250 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2C, USB, UFS, SDDC, PCIe, etc. + +config SM_GCC_6125 + tristate "SM6125 Global Clock Controller" + help + Support for the global clock controller on SM6125 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GCC_6350 + tristate "SM6350 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SM6350 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GCC_8150 + tristate "SM8150 Global Clock Controller" + help + Support for the global clock controller on SM8150 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GCC_8250 + tristate "SM8250 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SM8250 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GCC_8350 + tristate "SM8350 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SM8350 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GCC_8450 + tristate "SM8450 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SM8450 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GPUCC_6350 + tristate "SM6350 Graphics Clock Controller" + select SM_GCC_6350 + help + Support for the graphics clock controller on SM6350 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SM_GPUCC_8150 + tristate "SM8150 Graphics Clock Controller" + select SM_GCC_8150 + help + Support for the graphics clock controller on SM8150 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SM_GPUCC_8250 + tristate "SM8250 Graphics Clock Controller" + select SM_GCC_8250 + help + Support for the graphics clock controller on SM8250 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + +config SM_VIDEOCC_8150 + tristate "SM8150 Video Clock Controller" + select SM_GCC_8150 + select QCOM_GDSC + help + Support for the video clock controller on SM8150 devices. + Say Y if you want to support video devices and functionality such as + video encode and decode. + +config SM_VIDEOCC_8250 + tristate "SM8250 Video Clock Controller" + select SM_GCC_8250 + select QCOM_GDSC + help + Support for the video clock controller on SM8250 devices. + Say Y if you want to support video devices and functionality such as + video encode and decode. + +config SPMI_PMIC_CLKDIV + tristate "SPMI PMIC clkdiv Support" + depends on SPMI || COMPILE_TEST + help + This driver supports the clkdiv functionality on the Qualcomm + Technologies, Inc. SPMI PMIC. It configures the frequency of + clkdiv outputs of the PMIC. These clocks are typically wired + through alternate functions on GPIO pins. + +config QCOM_HFPLL + tristate "High-Frequency PLL (HFPLL) Clock Controller" + help + Support for the high-frequency PLLs present on Qualcomm devices. + Say Y if you want to support CPU frequency scaling on devices + such as MSM8974, APQ8084, etc. + +config KPSS_XCC + tristate "KPSS Clock Controller" + help + Support for the Krait ACC and GCC clock controllers. Say Y + if you want to support CPU frequency scaling on devices such + as MSM8960, APQ8064, etc. + +config KRAITCC + tristate "Krait Clock Controller" + depends on ARM + select KRAIT_CLOCKS + help + Support for the Krait CPU clocks on Qualcomm devices. + Say Y if you want to support CPU frequency scaling. + +config CLK_GFM_LPASS_SM8250 + tristate "SM8250 GFM LPASS Clocks" + help + Support for the Glitch Free Mux (GFM) Low power audio + subsystem (LPASS) clocks found on SM8250 SoCs. + +endif diff --git a/rr-cache/efcaab0440254e422ab4ee671f7f59e97d2cd120/postimage b/rr-cache/efcaab0440254e422ab4ee671f7f59e97d2cd120/postimage new file mode 100644 index 0000000..8d70f81 --- /dev/null +++ b/rr-cache/efcaab0440254e422ab4ee671f7f59e97d2cd120/postimage @@ -0,0 +1,522 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8450.dtsi" +#include "pm8350.dtsi" +#include "pm8350b.dtsi" +#include "pm8350c.dtsi" +#include "pm8450.dtsi" +#include "pmk8350.dtsi" +#include "pmr735a.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8450 HDK"; + compatible = "qcom,sm8450-hdk", "qcom,sm8450"; + + aliases { + serial0 = &uart7; + serial1 = &uart20; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + wcn6856: wcn6856 { + compatible = "qcom,wcn6855"; + #power-domain-cells = <0>; + + vddaon-supply = <&vreg_s11b_0p95>; + vddcx-supply = <&vreg_s11b_0p95>; + vddmx-supply = <&vreg_s2e_0p85>; + vddrfa1-supply = <&vreg_s1c_1p86>; + vddrfa2-supply = <&vreg_s12b_1p25>; + vddio-supply = <&vreg_s10b_1p8>; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_state &xo_clk_state>; + + xo-clk-gpios = <&tlmm 204 GPIO_ACTIVE_HIGH>; + wlan-en-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>; + }; +}; + +&apps_rsc { + pm8350-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&vreg_s11b_0p95>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&vreg_s12b_1p25>; + vdd-l8-supply = <&vreg_s2h_0p95>; + + vreg_s10b_1p8: smps10 { + regulator-name = "vreg_s10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s11b_0p95: smps11 { + regulator-name = "vreg_s11b_0p95"; + regulator-min-microvolt = <966000>; + regulator-max-microvolt = <1104000>; + }; + + vreg_s12b_1p25: smps12 { + regulator-name = "vreg_s12b_1p25"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1400000>; + }; + + vreg_l1b_0p91: ldo1 { + regulator-name = "vreg_l1b_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p07: ldo2 { + regulator-name = "vreg_l2b_3p07"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b_0p9: ldo3 { + regulator-name = "vreg_l3b_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_0p88: ldo5 { + regulator-name = "vreg_l5b_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <888000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p5: ldo7 { + regulator-name = "vreg_l7b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8350c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_bob>; + vdd-l2-l8-supply = <&vreg_bob>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&vreg_s12b_1p25>; + + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_1p86: smps1 { + regulator-name = "vreg_s1c_1p86"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <2024000>; + }; + + vreg_s10c_1p05: smps10 { + regulator-name = "vreg_s10c_1p05"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_3p0: ldo3 { + regulator-name = "vreg_l3c_3p0"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-name = "vreg_l4c_1p8"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_1p8: ldo6 { + regulator-name = "vreg_l6c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-name = "vreg_l7c_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c_1p8: ldo12 { + regulator-name = "vreg_l12c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c_3p0: ldo13 { + regulator-name = "vreg_l13c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8450-rpmh-regulators { + compatible = "qcom,pm8450-rpmh-regulators"; + qcom,pmic-id = "h"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vdd-l2-supply = <&vreg_bob>; + vdd-l3-supply = <&vreg_bob>; + vdd-l4-supply = <&vreg_bob>; + + vreg_s2h_0p95: smps2 { + regulator-name = "vreg_s2h_0p95"; + regulator-min-microvolt = <848000>; + regulator-max-microvolt = <1104000>; + }; + + vreg_s3h_0p5: smps3 { + regulator-name = "vreg_s3h_0p5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + }; + + vreg_l2h_0p91: ldo2 { + regulator-name = "vreg_l2h_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3h_0p91: ldo3 { + regulator-name = "vreg_l3h_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + }; + + pmr735a-rpmh-regulators { + compatible = "qcom,pmr735a-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + + vdd-l1-l2-supply = <&vreg_s2e_0p85>; + vdd-l3-supply = <&vreg_s1e_1p25>; + vdd-l4-supply = <&vreg_s1c_1p86>; + vdd-l5-l6-supply = <&vreg_s1c_1p86>; + vdd-l7-bob-supply = <&vreg_bob>; + + vreg_s1e_1p25: smps1 { + regulator-name = "vreg_s1e_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1296000>; + }; + + vreg_s2e_0p85: smps2 { + regulator-name = "vreg_s2e_0p85"; + regulator-min-microvolt = <1012000>; + regulator-max-microvolt = <1040000>; + }; + + vreg_l1e_0p8: ldo1 { + regulator-name = "vreg_l1e_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l4e_1p7: ldo4 { + regulator-name = "vreg_l4e_1p7"; + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1776000>; + }; + + vreg_l5e_0p88: ldo5 { + regulator-name = "vreg_l5e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + vreg_l6e_1p2: ldo6 { + regulator-name = "vreg_l6e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l7e_2p8: ldo7 { + regulator-name = "vreg_l7e_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; +}; + +&pcie0 { + status = "okay"; + max-link-speed = <2>; +}; + +&pcie0_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + power-domains = <&wcn6856>; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie1_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l2h_0p91>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + +&remoteproc_adsp { + status = "okay"; + firmware-name = "qcom/sm8450/adsp.mbn"; +}; + +&remoteproc_cdsp { + status = "okay"; + firmware-name = "qcom/sm8450/cdsp.mbn"; +}; + +&remoteproc_mpss { + status = "okay"; + firmware-name = "qcom/sm8450/modem.mbn"; +}; + +&remoteproc_slpi { + status = "okay"; + firmware-name = "qcom/sm8450/slpi.mbn"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <28 4>, <36 4>; + + bt_en_state: bt-default-state { + bt-en { + pins = "gpio81"; + function = "gpio"; + + drive-strength = <16>; + output-low; + bias-pull-up; + }; + }; + + xo_clk_state: xo_clk_state { + pinconf { + pins = "gpio204"; + function = "gpio"; + + drive-strength = <16>; + output-low; + bias-pull-down; + }; + }; + + wlan_en_state: wlan_en_state { + pinconf { + pins = "gpio80"; + function = "gpio"; + + drive-strength = <16>; + output-low; + bias-pull-down; + }; + }; +}; + +&uart7 { + status = "okay"; +}; + +&uart20 { + status = "okay"; + bluetooth { + /* a little lie */ + compatible = "qcom,wcn6855-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_state>; + power-domains = <&wcn6856>; + enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; + }; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7b_2p5>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <1200000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + vdda-max-microamp = <173000>; + vdda-pll-max-microamp = <24900>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5b_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p07>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p91>; +}; diff --git a/rr-cache/efcaab0440254e422ab4ee671f7f59e97d2cd120/preimage b/rr-cache/efcaab0440254e422ab4ee671f7f59e97d2cd120/preimage new file mode 100644 index 0000000..501577a --- /dev/null +++ b/rr-cache/efcaab0440254e422ab4ee671f7f59e97d2cd120/preimage @@ -0,0 +1,554 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* +<<<<<<< + * Copyright (c) 2021, Linaro Limited +======= + * Copyright (c) 2022, Linaro Limited +>>>>>>> + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8450.dtsi" +<<<<<<< +======= +#include "pm8350.dtsi" +#include "pm8350b.dtsi" +#include "pm8350c.dtsi" +#include "pm8450.dtsi" +#include "pmk8350.dtsi" +#include "pmr735a.dtsi" +>>>>>>> + +/ { + model = "Qualcomm Technologies, Inc. SM8450 HDK"; + compatible = "qcom,sm8450-hdk", "qcom,sm8450"; + + aliases { + serial0 = &uart7; +<<<<<<< +======= + serial1 = &uart20; +>>>>>>> + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +<<<<<<< +======= + + wcn6856: wcn6856 { + compatible = "qcom,wcn6855"; + #power-domain-cells = <0>; + + vddaon-supply = <&vreg_s11b_0p95>; + vddcx-supply = <&vreg_s11b_0p95>; + vddmx-supply = <&vreg_s2e_0p85>; + vddrfa1-supply = <&vreg_s1c_1p86>; + vddrfa2-supply = <&vreg_s12b_1p25>; + vddio-supply = <&vreg_s10b_1p8>; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_state &xo_clk_state>; + + xo-clk-gpios = <&tlmm 204 GPIO_ACTIVE_HIGH>; + wlan-en-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>; + }; +>>>>>>> +}; + +&apps_rsc { + pm8350-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&vreg_s11b_0p95>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&vreg_s12b_1p25>; + vdd-l8-supply = <&vreg_s2h_0p95>; + + vreg_s10b_1p8: smps10 { + regulator-name = "vreg_s10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s11b_0p95: smps11 { + regulator-name = "vreg_s11b_0p95"; + regulator-min-microvolt = <966000>; + regulator-max-microvolt = <1104000>; + }; + + vreg_s12b_1p25: smps12 { + regulator-name = "vreg_s12b_1p25"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1400000>; + }; + + vreg_l1b_0p91: ldo1 { + regulator-name = "vreg_l1b_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p07: ldo2 { + regulator-name = "vreg_l2b_3p07"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b_0p9: ldo3 { + regulator-name = "vreg_l3b_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_0p88: ldo5 { + regulator-name = "vreg_l5b_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <888000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p5: ldo7 { + regulator-name = "vreg_l7b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8350c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_bob>; + vdd-l2-l8-supply = <&vreg_bob>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&vreg_s12b_1p25>; + + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_1p86: smps1 { + regulator-name = "vreg_s1c_1p86"; +<<<<<<< + regulator-min-microvolt = <1800000>; +======= + regulator-min-microvolt = <1900000>; +>>>>>>> + regulator-max-microvolt = <2024000>; + }; + + vreg_s10c_1p05: smps10 { + regulator-name = "vreg_s10c_1p05"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_3p0: ldo3 { + regulator-name = "vreg_l3c_3p0"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-name = "vreg_l4c_1p8"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_1p8: ldo6 { + regulator-name = "vreg_l6c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-name = "vreg_l7c_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c_1p8: ldo12 { + regulator-name = "vreg_l12c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c_3p0: ldo13 { + regulator-name = "vreg_l13c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8450-rpmh-regulators { + compatible = "qcom,pm8450-rpmh-regulators"; + qcom,pmic-id = "h"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vdd-l2-supply = <&vreg_bob>; + vdd-l3-supply = <&vreg_bob>; + vdd-l4-supply = <&vreg_bob>; + + vreg_s2h_0p95: smps2 { + regulator-name = "vreg_s2h_0p95"; + regulator-min-microvolt = <848000>; + regulator-max-microvolt = <1104000>; + }; + + vreg_s3h_0p5: smps3 { + regulator-name = "vreg_s3h_0p5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + }; + + vreg_l2h_0p91: ldo2 { + regulator-name = "vreg_l2h_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3h_0p91: ldo3 { + regulator-name = "vreg_l3h_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + }; + + pmr735a-rpmh-regulators { + compatible = "qcom,pmr735a-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + + vdd-l1-l2-supply = <&vreg_s2e_0p85>; + vdd-l3-supply = <&vreg_s1e_1p25>; + vdd-l4-supply = <&vreg_s1c_1p86>; + vdd-l5-l6-supply = <&vreg_s1c_1p86>; + vdd-l7-bob-supply = <&vreg_bob>; + + vreg_s1e_1p25: smps1 { + regulator-name = "vreg_s1e_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1296000>; + }; + + vreg_s2e_0p85: smps2 { + regulator-name = "vreg_s2e_0p85"; +<<<<<<< + regulator-min-microvolt = <1012000>; +======= + regulator-min-microvolt = <500000>; +>>>>>>> + regulator-max-microvolt = <1040000>; + }; + + vreg_l1e_0p8: ldo1 { + regulator-name = "vreg_l1e_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l4e_1p7: ldo4 { + regulator-name = "vreg_l4e_1p7"; + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1776000>; + }; + + vreg_l5e_0p88: ldo5 { + regulator-name = "vreg_l5e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + vreg_l6e_1p2: ldo6 { + regulator-name = "vreg_l6e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l7e_2p8: ldo7 { + regulator-name = "vreg_l7e_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; +}; + +<<<<<<< +======= +&pcie0 { + status = "okay"; + max-link-speed = <2>; +}; + +&pcie0_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + power-domains = <&wcn6856>; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie1_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l2h_0p91>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + +&remoteproc_adsp { + status = "okay"; + firmware-name = "qcom/sm8450/adsp.mbn"; +}; + +&remoteproc_cdsp { + status = "okay"; + firmware-name = "qcom/sm8450/cdsp.mbn"; +}; + +&remoteproc_mpss { + status = "okay"; + firmware-name = "qcom/sm8450/modem.mbn"; +}; + +&remoteproc_slpi { + status = "okay"; + firmware-name = "qcom/sm8450/slpi.mbn"; +}; + +>>>>>>> +&qupv3_id_0 { + status = "okay"; +}; + +<<<<<<< +&qupv3_id_2 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <28 4>, <36 4>; + + bt_en_state: bt-default-state { + bt-en { + pins = "gpio81"; + function = "gpio"; + + drive-strength = <16>; + output-low; + bias-pull-up; + }; + }; + + xo_clk_state: xo_clk_state { + pinconf { + pins = "gpio204"; + function = "gpio"; + + drive-strength = <16>; + output-low; + bias-pull-down; + }; + }; + + wlan_en_state: wlan_en_state { + pinconf { + pins = "gpio80"; + function = "gpio"; + + drive-strength = <16>; + output-low; + bias-pull-down; + }; + }; +======= +&tlmm { + gpio-reserved-ranges = <28 4>, <36 4>; +>>>>>>> +}; + +&uart7 { + status = "okay"; +}; + +<<<<<<< +======= +&uart20 { + status = "okay"; + bluetooth { + /* a little lie */ + compatible = "qcom,wcn6855-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_state>; + power-domains = <&wcn6856>; + enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; + }; +}; + +>>>>>>> +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7b_2p5>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <1200000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + vdda-max-microamp = <173000>; + vdda-pll-max-microamp = <24900>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5b_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p07>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p91>; +}; diff --git a/rr-cache/f8a1a7626be9dc69ed208c66229f310158ca0a52/thisimage b/rr-cache/f8a1a7626be9dc69ed208c66229f310158ca0a52/thisimage index d996e5a..b8ab6b3 100644 --- a/rr-cache/f8a1a7626be9dc69ed208c66229f310158ca0a52/thisimage +++ b/rr-cache/f8a1a7626be9dc69ed208c66229f310158ca0a52/thisimage @@ -5983,6 +5983,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = { .compatible = "qcom,sc8180x-qmp-ufs-phy", .data = &sm8150_ufsphy_cfg, }, { + .compatible = "qcom,sc8280xp-qmp-ufs-phy", + .data = &sm8350_ufsphy_cfg, + }, { .compatible = "qcom,sc8180x-qmp-usb3-phy", .data = &sm8150_usb3phy_cfg, }, { |