aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2014-07-27Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A bunch of fixes for perf and kprobes: - revert a commit that caused a perf group regression - silence dmesg spam - fix kprobe probing errors on ia64 and ppc64 - filter kprobe faults from userspace - lockdep fix for perf exit path - prevent perf #GP in KVM guest - correct perf event and filters" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kprobes: Fix "Failed to find blacklist" probing errors on ia64 and ppc64 kprobes/x86: Don't try to resolve kprobe faults from userspace perf/x86/intel: Avoid spamming kernel log for BTS buffer failure perf/x86/intel: Protect LBR and extra_regs against KVM lying perf: Fix lockdep warning on process exit perf/x86/intel/uncore: Fix SNB-EP/IVT Cbox filter mappings perf/x86/intel: Use proper dTLB-load-misses event on IvyBridge perf: Revert ("perf: Always destroy groups on exit")
2014-07-27Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "A couple of crash fixes, plus a fix that on 32 bits would cause a missing -ENOSYS for nonexistent system calls" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, cpu: Fix cache topology for early P4-SMT x86_32, entry: Store badsys error code in %eax x86, MCE: Robustify mcheck_init_device
2014-07-25Merge tag 'blackfin-3.16-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux Pull blackfin fixes from Steven Miao: "smc nor flash PM fix, pinctrl group fix, update defconfig, and build fixes" * tag 'blackfin-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux: blackfin: vmlinux.lds.S: reserve 32 bytes space at the end of data section for XIP kernel defconfig: BF609: update spi config name irq: blackfin sec: drop duplicated sec priority set blackfin: bind different groups of one pinmux function to different state name blackfin: fix some bf5xx boards build for missing <linux/gpio.h> pm: bf609: cleanup smc nor flash
2014-07-26blackfin: vmlinux.lds.S: reserve 32 bytes space at the end of data section ↵Steven Miao
for XIP kernel to collect some undefined section to the end of the data section and avoid section overlap Signed-off-by: Steven Miao <realmz6@gmail.com>
2014-07-26defconfig: BF609: update spi config nameSteven Miao
Signed-off-by: Steven Miao <realmz6@gmail.com>
2014-07-26irq: blackfin sec: drop duplicated sec priority setSteven Miao
Signed-off-by: Steven Miao <realmz6@gmail.com>
2014-07-26blackfin: bind different groups of one pinmux function to different state nameSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Steven Miao <realmz6@gmail.com>
2014-07-26blackfin: fix some bf5xx boards build for missing <linux/gpio.h>Steven Miao
Signed-off-by: Steven Miao <realmz6@gmail.com>
2014-07-26pm: bf609: cleanup smc nor flashSteven Miao
drop smc pin state change code, pin state will be saved in pinctrl-adi2 driver cleanup nor flash init/exit for pm suspend/resume Signed-off-by: Steven Miao <realmz6@gmail.com>
2014-07-24x86: Merge tag 'ras_urgent' into x86/urgentH. Peter Anvin
Promote one fix for 3.16 This fix was necessary after 9c15a24b038f ("x86/mce: Improve mcheck_init_device() error handling") went in. What this patch did was, among others, check the return value of misc_register and exit early if it encountered an error. Original code sloppily didn't do that. However, cef12ee52b05 ("xen/mce: Add mcelog support for Xen platform") made it so that xen's init routine xen_late_init_mcelog runs first. This was needed for the xen mcelog device which is supposed to be independent from the baremetal one. Initially it was reported that misc_register() fails often on xen and that's why it needed fixing. However, it is *supposed* to fail by design, when running in dom0 so that the xen mcelog device file gets registered first. And *then* you need the notifier *not* unregistered on the error path so that the timer does get deleted properly in the CPU hotplug notifier. Btw, this fix is needed also on baremetal in the unlikely event that misc_register(&mce_chrdev_device) fails there too. I was unsure whether to rush it in now and decided to delay it to 3.17. However, xen people wanted it promoted as it breaks xen when doing cpu hotplug there. So, after a bit of simmering in tip/master for initial smoke testing, let's move it to 3.16. It fixes a semi-regression which got introduced in 3.16 so no need for stable tagging. tip/x86/ras contains that exact same commit but we can't remove it there as it is not the last one. It won't cause any merge issues, as I confirmed locally but I should state here the special situation of this one fix explicitly anyway. Thanks. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-07-24parisc: Eliminate memset after alloc_bootmem_pagesHIMANGI SARAOGI
alloc_bootmem and related function always return zeroed region of memory. Thus a memset after calls to these functions is unnecessary. The following Coccinelle semantic patch was used for making the change: @@ expression E,E1; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...) ... when != E - memset(E,0,E1); Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Helge Deller <deller@gmx.de>
2014-07-24parisc: Remove SA_RESTORER defineJohn David Anglin
The sa_restorer field in struct sigaction is obsolete and no longer in the parisc implementation. However, the core code assumes the field is present if SA_RESTORER is defined. So, the define needs to be removed. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
2014-07-23Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Fix arm64 regression introduced by limiting the CMA buffer to ZONE_DMA on platforms where RAM starts above 4GB (and ZONE_DMA becoming 0)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Create non-empty ZONE_DMA when DRAM starts above 4GB
2014-07-23Merge tag 'xtensa-next-20140721' of git://github.com/czankel/xtensa-linuxLinus Torvalds
Pull Xtensa fixes from Chris Zankel: - resolve FIXMEs in double exception handler for window overflow. This fix makes native building of linux on xtensa host possible; - fix sysmem region removal issue introduced in 3.15. * tag 'xtensa-next-20140721' of git://github.com/czankel/xtensa-linux: xtensa: fix sysmem reservation at the end of existing block xtensa: add fixup for double exception raised in window overflow
2014-07-23Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Ben Herrenschmidt: "Here is a handful of powerpc fixes for 3.16. They are all pretty simple and self contained and should still make this release" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: use _GLOBAL_TOC for memmove powerpc/pseries: dynamically added OF nodes need to call of_node_init powerpc: subpage_protect: Increase the array size to take care of 64TB powerpc: Fix bugs in emulate_step() powerpc: Disable doorbells on Power8 DD1.x
2014-07-23sh: also try passing -m4-nofpu for SH2A buildsGeert Uytterhoeven
When compiling a SH2A kernel (e.g. se7206_defconfig or rsk7203_defconfig) using sh4-linux-gcc, linking fails with: net/built-in.o: In function `__sk_run_filter': net/core/filter.c:566: undefined reference to `__fpscr_values' net/core/filter.c:269: undefined reference to `__fpscr_values' ... net/built-in.o:net/core/filter.c:580: more undefined references to `__fpscr_values' follow This happens because sh4-linux-gcc doesn't support the "-m2a-nofpu", which is thus filtered out by "$(call cc-option, ...)". As compiling using sh4-linux-gcc is useful for compile coverage, also try passing "-m4-nofpu" (which is presumably filtered out when using a real sh2a-linux toolchain) to disable the generation of FPU instructions and references to __fpscr_values[]. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Tony Breeds <tony@bakeyournoodle.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-23x86, cpu: Fix cache topology for early P4-SMTPeter Zijlstra
P4 systems with cpuid level < 4 can have SMT, but the cache topology description available (cpuid2) does not include SMP information. Now we know that SMT shares all cache levels, and therefore we can mark all available cache levels as shared. We do this by setting cpu_llc_id to ->phys_proc_id, since that's the same for each SMT thread. We can do this unconditional since if there's no SMT its still true, the one CPU shares cache with only itself. This fixes a problem where such CPUs report an incorrect LLC CPU mask. This in turn fixes a crash in the scheduler where the topology was build wrong, it assumes the LLC mask to include at least the SMT CPUs. Cc: Josh Boyer <jwboyer@redhat.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Bruno Wolff III <bruno@wolff.to> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140722133514.GM12054@laptop.lan Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-07-23arm64: Create non-empty ZONE_DMA when DRAM starts above 4GBCatalin Marinas
ZONE_DMA is created to allow 32-bit only devices to access memory in the absence of an IOMMU. On systems where the memory starts above 4GB, it is expected that some devices have a DMA offset hardwired to be able to access the bottom of the memory. Linux currently supports DT bindings for the DMA offsets but they are not (easily) available early during boot. This patch tries to guess a DMA offset and assumes that ZONE_DMA corresponds to the 32-bit mask above the start of DRAM. Fixes: 2d5a5612bc (arm64: Limit the CMA buffer to 32-bit if ZONE_DMA) Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Mark Salter <msalter@redhat.com> Tested-by: Mark Salter <msalter@redhat.com> Tested-by: Anup Patel <anup.patel@linaro.org>
2014-07-22x86_32, entry: Store badsys error code in %eaxSven Wegener
Commit 554086d ("x86_32, entry: Do syscall exit work on badsys (CVE-2014-4508)") introduced a regression in the x86_32 syscall entry code, resulting in syscall() not returning proper errors for undefined syscalls on CPUs supporting the sysenter feature. The following code: > int result = syscall(666); > printf("result=%d errno=%d error=%s\n", result, errno, strerror(errno)); results in: > result=666 errno=0 error=Success Obviously, the syscall return value is the called syscall number, but it should have been an ENOSYS error. When run under ptrace it behaves correctly, which makes it hard to debug in the wild: > result=-1 errno=38 error=Function not implemented The %eax register is the return value register. For debugging via ptrace the syscall entry code stores the complete register context on the stack. The badsys handlers only store the ENOSYS error code in the ptrace register set and do not set %eax like a regular syscall handler would. The old resume_userspace call chain contains code that clobbers %eax and it restores %eax from the ptrace registers afterwards. The same goes for the ptrace-enabled call chain. When ptrace is not used, the syscall return value is the passed-in syscall number from the untouched %eax register. Use %eax as the return value register in syscall_badsys and sysenter_badsys, like a real syscall handler does, and have the caller push the value onto the stack for ptrace access. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Link: http://lkml.kernel.org/r/alpine.LNX.2.11.1407221022380.31021@titan.int.lan.stealer.net Reviewed-and-tested-by: Andy Lutomirski <luto@amacapital.net> Cc: <stable@vger.kernel.org> # If 554086d is backported Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-07-22powerpc: use _GLOBAL_TOC for memmoveLi Zhong
memmove may be called from module code copy_pages(btrfs), and it may call memcpy, which may call back to C code, so it needs to use _GLOBAL_TOC to set up r2 correctly. This fixes following error when I tried to boot an le guest: Vector: 300 (Data Access) at [c000000073f97210] pc: c000000000015004: enable_kernel_altivec+0x24/0x80 lr: c000000000058fbc: enter_vmx_copy+0x3c/0x60 sp: c000000073f97490 msr: 8000000002009033 dar: d000000001d50170 dsisr: 40000000 current = 0xc0000000734c0000 paca = 0xc00000000fff0000 softe: 0 irq_happened: 0x01 pid = 815, comm = mktemp enter ? for help [c000000073f974f0] c000000000058fbc enter_vmx_copy+0x3c/0x60 [c000000073f97510] c000000000057d34 memcpy_power7+0x274/0x840 [c000000073f97610] d000000001c3179c copy_pages+0xfc/0x110 [btrfs] [c000000073f97660] d000000001c3c248 memcpy_extent_buffer+0xe8/0x160 [btrfs] [c000000073f97700] d000000001be4be8 setup_items_for_insert+0x208/0x4a0 [btrfs] [c000000073f97820] d000000001be50b4 btrfs_insert_empty_items+0xf4/0x140 [btrfs] [c000000073f97890] d000000001bfed30 insert_with_overflow+0x70/0x180 [btrfs] [c000000073f97900] d000000001bff174 btrfs_insert_dir_item+0x114/0x2f0 [btrfs] [c000000073f979a0] d000000001c1f92c btrfs_add_link+0x10c/0x370 [btrfs] [c000000073f97a40] d000000001c20e94 btrfs_create+0x204/0x270 [btrfs] [c000000073f97b00] c00000000026d438 vfs_create+0x178/0x210 [c000000073f97b50] c000000000270a70 do_last+0x9f0/0xe90 [c000000073f97c20] c000000000271010 path_openat+0x100/0x810 [c000000073f97ce0] c000000000272ea8 do_filp_open+0x58/0xd0 [c000000073f97dc0] c00000000025ade8 do_sys_open+0x1b8/0x300 [c000000073f97e30] c00000000000a008 syscall_exit+0x0/0x7c Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-22powerpc/pseries: dynamically added OF nodes need to call of_node_initTyrel Datwyler
Commit 75b57ecf9 refactored device tree nodes to use kobjects such that they can be exposed via /sysfs. A secondary commit 0829f6d1f furthered this rework by moving the kobect initialization logic out of of_node_add into its own of_node_init function. The inital commit removed the existing kref_init calls in the pseries dlpar code with the assumption kobject initialization would occur in of_node_add. The second commit had the side effect of triggering a BUG_ON during DLPAR, migration and suspend/resume operations as a result of dynamically added nodes being uninitialized. This patch fixes this by adding of_node_init calls in place of the previously removed kref_init calls. Fixes: 0829f6d1f69e ("of: device_node kobject lifecycle fixes") Cc: stable@vger.kernel.org Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-22powerpc: subpage_protect: Increase the array size to take care of 64TBAneesh Kumar K.V
We now support TASK_SIZE of 16TB, hence the array should be 8. Fixes the below crash: Unable to handle kernel paging request for data at address 0x000100bd Faulting instruction address: 0xc00000000004f914 cpu 0x13: Vector: 300 (Data Access) at [c000000fea75fa90] pc: c00000000004f914: .sys_subpage_prot+0x2d4/0x5c0 lr: c00000000004fb5c: .sys_subpage_prot+0x51c/0x5c0 sp: c000000fea75fd10 msr: 9000000000009032 dar: 100bd dsisr: 40000000 current = 0xc000000fea6ae490 paca = 0xc00000000fb8ab00 softe: 0 irq_happened: 0x00 pid = 8237, comm = a.out enter ? for help [c000000fea75fe30] c00000000000a164 syscall_exit+0x0/0x98 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-22powerpc: Fix bugs in emulate_step()Paul Mackerras
This fixes some bugs in emulate_step(). First, the setting of the carry bit for the arithmetic right-shift instructions was not correct on 64-bit machines because we were masking with a mask of type int rather than unsigned long. Secondly, the sld (shift left doubleword) instruction was using the wrong instruction field for the register containing the shift count. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-22powerpc: Disable doorbells on Power8 DD1.xJoel Stanley
These processors do not currently support doorbell IPIs, so remove them from the feature list if we are at DD 1.xx for the 0x004d part. This fixes a regression caused by d4e58e5928f8 (powerpc/powernv: Enable POWER8 doorbell IPIs). With that patch the kernel would hang at boot when calling smp_call_function_many, as the doorbell would not be received by the target CPUs: .smp_call_function_many+0x2bc/0x3c0 (unreliable) .on_each_cpu_mask+0x30/0x100 .cpuidle_register_driver+0x158/0x1a0 .cpuidle_register+0x2c/0x110 .powernv_processor_idle_init+0x23c/0x2c0 .do_one_initcall+0xd4/0x260 .kernel_init_freeable+0x25c/0x33c .kernel_init+0x1c/0x120 .ret_from_kernel_thread+0x58/0x7c Fixes: d4e58e5928f8 (powerpc/powernv: Enable POWER8 doorbell IPIs) Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fix from David Miller: "Need to hook up the new renameat2 system call" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Hook up renameat2 syscall.
2014-07-21sparc: Hook up renameat2 syscall.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "These are mostly PPC changes for 3.16-new things. However, there is an x86 change too and it is a regression from 3.14. As it only affects nested virtualization and there were other changes in this area in 3.16, I am not nominating it for 3.15-stable" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Check for nested events if there is an injectable interrupt KVM: PPC: RTAS: Do byte swaps explicitly KVM: PPC: Book3S PR: Fix ABIv2 on LE KVM: PPC: Assembly functions exported to modules need _GLOBAL_TOC() PPC: Add _GLOBAL_TOC for 32bit KVM: PPC: BOOK3S: HV: Use base page size when comparing against slb value KVM: PPC: Book3E: Unlock mmu_lock when setting caching atttribute
2014-07-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "A couple of last minute bug fixes for 3.16, including a fix for ptrace to close a hole which allowed a user space program to write to the kernel address space" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: fix restore of invalid floating-point-control s390/zcrypt: improve device probing for zcrypt adapter cards s390/ptrace: fix PSW mask check s390/MSI: Use standard mask and unmask funtions s390/3270: correct size detection with the read-partition command s390: require mvcos facility, not tod clock steering facility
2014-07-21x86, MCE: Robustify mcheck_init_deviceBorislav Petkov
BorisO reports that misc_register() fails often on xen. The current code unregisters the CPU hotplug notifier in that case. If then a CPU is offlined and onlined back again, we end up with a second timer running on that CPU, leading to soft lockups and system hangs. So let's leave the hotcpu notifier always registered - even if mce_device_create failed for some cores and never unreg it so that we can deal with the timer handling accordingly. Reported-and-Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: http://lkml.kernel.org/r/1403274493-1371-1-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Borislav Petkov <bp@suse.de>
2014-07-20um: segv: Save regs only in case of a kernel mode faultRichard Weinberger
...otherwise me lose user mode regs and the resulting stack trace is useless. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-20um: Fix hung task in fix_range_common()Richard Weinberger
If do_ops() fails we have to release current->mm->mmap_sem otherwise the failing task will never terminate. Reported-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-20um: Ensure that a stub page cannot get unmappedRichard Weinberger
Trinity discovered an execution path such that a task can unmap his stub page. Reported-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-20Revert "um: Fix wait_stub_done() error handling"Richard Weinberger
This reverts commit 0974a9cadc7886f7baaa458bb0c89f5c5f9d458e. The real for for that issue is to release current->mm->mmap_sem in fix_range_common(). Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-19Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "The locking department delivers: - A rather large and intrusive bundle of fixes to address serious performance regressions introduced by the new rwsem / mcs technology. Simpler solutions have been discussed, but they would have been ugly bandaids with more risk than doing the right thing. - Make the rwsem spin on owner technology opt-in for architectures and enable it only on the known to work ones. - A few fixes to the lockdep userspace library" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rwsem: Add CONFIG_RWSEM_SPIN_ON_OWNER locking/mutex: Disable optimistic spinning on some architectures locking/rwsem: Reduce the size of struct rw_semaphore locking/rwsem: Rename 'activity' to 'count' locking/spinlocks/mcs: Micro-optimize osq_unlock() locking/spinlocks/mcs: Introduce and use init macro and function for osq locks locking/spinlocks/mcs: Convert osq lock to atomic_t to reduce overhead locking/spinlocks/mcs: Rename optimistic_spin_queue() to optimistic_spin_node() locking/rwsem: Allow conservative optimistic spinning when readers have lock tools/liblockdep: Account for bitfield changes in lockdeps lock_acquire tools/liblockdep: Remove debug print left over from development tools/liblockdep: Fix comparison of a boolean value with a value of 2
2014-07-18Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A smaller set of fixes this week, and all regression fixes: - a handful of issues fixed on at91 with common clock conversion - a set of fixes for Marvell mvebu (SMP, coherency, PM) - a clock fix for i.MX6Q. - ... and a SMP/hotplug fix for Exynos" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: EXYNOS: Fix core ID used by platsmp and hotplug code ARM: at91/dt: add missing clocks property to pwm node in sam9x5.dtsi ARM: at91/dt: fix usb0 clocks definition in sam9n12 dtsi ARM: at91: at91sam9x5: correct typo error for ohci clock ARM: clk-imx6q: parent lvds_sel input from upstream clock gates ARM: mvebu: Fix coherency bus notifiers by using separate notifiers ARM: mvebu: Fix the operand list in the inline asm of armada_370_xp_pmsu_idle_enter ARM: mvebu: fix SMP boot for Armada 38x and Armada 375 Z1 in big endian
2014-07-18Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "A couple of key fixes and a few less critical ones. The main ones are: - add a .bss section to the PE/COFF headers when building with EFI stub - invoke the correct paravirt magic when building the espfix page tables Unfortunately both of these areas also have at least one additional fix each still in thie pipeline, but which are not yet ready to push" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Remove unused variable "polling" x86/espfix/xen: Fix allocation of pages for paravirt page tables x86/efi: Include a .bss section within the PE/COFF headers efi: fdt: Do not report an error during boot if UEFI is not available efi/arm64: efistub: remove local copy of linux_banner
2014-07-18ARM: EXYNOS: Fix core ID used by platsmp and hotplug codeTomasz Figa
When CPU topology is specified in device tree, cpu_logical_map() does not return core ID anymore, but rather full MPIDR value. This breaks existing calculation of PMU register offsets on Exynos SoCs. This patch fixes the problem by adjusting the code to use only core ID bits of the value returned by cpu_logical_map() to allow CPU topology to be specified in device tree on Exynos SoCs. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-18Merge tag 'imx-fixes-3.16-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: imx: fixes for 3.16, 2nd take" from Shawn Guo: The i.MX fixes for 3.16, 2nd take: It fixes a hard machine hang regression for boards where only pcie is active but no sata, as the latest imx6-pcie driver is no longer enabling the upstream clock directly but only lvds clk out. * tag 'imx-fixes-3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: clk-imx6q: parent lvds_sel input from upstream clock gates Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-18Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson
Merge "at91: fixes for 3.16 #2" from Nicolas Ferre: Second AT91 fixes series for 3.16 - fix clock definitions after the move to CCF for: * at91sam9n12 (ohci) * at91sam9x5 (ohci, pwm) * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91/dt: add missing clocks property to pwm node in sam9x5.dtsi ARM: at91/dt: fix usb0 clocks definition in sam9n12 dtsi ARM: at91: at91sam9x5: correct typo error for ohci clock Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-18Merge tag 'mvebu-fixes-3.16-3' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson
Merge "mvebu fixes for v3.16 (round 3)" from Jason Cooper: - Fix SMP boot on 38x/375 in big endian - Fix operand list for pmsu on 370/XP - Fix coherency bus notifiers * tag 'mvebu-fixes-3.16-3' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Fix coherency bus notifiers by using separate notifiers ARM: mvebu: Fix the operand list in the inline asm of armada_370_xp_pmsu_idle_enter ARM: mvebu: fix SMP boot for Armada 38x and Armada 375 Z1 in big endian Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-18ARM: at91/dt: add missing clocks property to pwm node in sam9x5.dtsiBoris BREZILLON
The pwm driver requires a clocks property referencing the pwm peripheral clk. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-18ARM: at91/dt: fix usb0 clocks definition in sam9n12 dtsiBoris BREZILLON
udphs_clk (USB Device Controller clock) is referenced instead of uhphs_clk (USB Host Controller clock). Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-18ARM: at91: at91sam9x5: correct typo error for ohci clockBo Shen
Correct the typo error for the second "uhphs_clk". Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-18ARM: clk-imx6q: parent lvds_sel input from upstream clock gatesLucas Stach
The i.MX6 reference manual doesn't make a clear distinction between the fixed clock divider and the enable gate for the pcie and sata reference clocks. This lead to the lvds mux inputs in the imx6q clk driver to be parented from the ref clock (which is the divider) instead of the actual gate, which in turn prevents the upstream clock to actually be enabled when lvds clk out is active. This fixes a hard machine hang regression in kernel 3.16 for boards where only pcie is active but no sata, as with this kernel version the imx6-pcie driver is no longer enabling the upstream clock directly but only lvds clk out. Reported-by: Arne Ruhnau <arne.ruhnau@target-sg.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Arne Ruhnau <arne.ruhnau@target-sg.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-16Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "A cpufreq lockup fix and a compiler warning fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix compiler warnings x86, tsc: Fix cpufreq lockup
2014-07-16Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Tooling fixes and an Intel PMU driver fixlet" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Do not allow optimized switch for non-cloned events perf/x86/intel: ignore CondChgd bit to avoid false NMI handling perf symbols: Get kernel start address by symbol name perf tools: Fix segfault in cumulative.callchain report
2014-07-16locking/mutex: Disable optimistic spinning on some architecturesPeter Zijlstra
The optimistic spin code assumes regular stores and cmpxchg() play nice; this is found to not be true for at least: parisc, sparc32, tile32, metag-lock1, arc-!llsc and hexagon. There is further wreckage, but this in particular seemed easy to trigger, so blacklist this. Opt in for known good archs. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Jason Low <jason.low2@hp.com> Cc: Waiman Long <waiman.long@hp.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: John David Anglin <dave.anglin@bell.net> Cc: James Hogan <james.hogan@imgtec.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: stable@vger.kernel.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: sparclinux@vger.kernel.org Link: http://lkml.kernel.org/r/20140606175316.GV13930@laptop.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-16kprobes/x86: Don't try to resolve kprobe faults from userspaceAndy Lutomirski
This commit: commit 6f6343f53d133bae516caf3d254bce37d8774625 Author: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Date: Thu Apr 17 17:17:33 2014 +0900 kprobes/x86: Call exception handlers directly from do_int3/do_debug appears to have inadvertently dropped a check that the int3 came from kernel mode. Trying to dereference addr when addr is user-controlled is completely bogus. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/c4e339882c121aa76254f2adde3fcbdf502faec2.1405099506.git.luto@amacapital.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-16perf/x86/intel: Avoid spamming kernel log for BTS buffer failureDavid Rientjes
It's unnecessary to excessively spam the kernel log anytime the BTS buffer cannot be allocated, so make this allocation __GFP_NOWARN. The user probably will want to at least find some artifact that the allocation has failed in the past, probably due to fragmentation because of its large size, when it's not allocated at bootstrap. Thus, add a WARN_ONCE() so something is left behind for them to understand why perf commnads that require PEBS is not working properly. Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1406301600460.26302@chino.kir.corp.google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-16perf/x86/intel: Protect LBR and extra_regs against KVM lyingKan Liang
With -cpu host, KVM reports LBR and extra_regs support, if the host has support. When the guest perf driver tries to access LBR or extra_regs MSR, it #GPs all MSR accesses,since KVM doesn't handle LBR and extra_regs support. So check the related MSRs access right once at initialization time to avoid the error access at runtime. For reproducing the issue, please build the kernel with CONFIG_KVM_INTEL = y (for host kernel). And CONFIG_PARAVIRT = n and CONFIG_KVM_GUEST = n (for guest kernel). Start the guest with -cpu host. Run perf record with --branch-any or --branch-filter in guest to trigger LBR Run perf stat offcore events (E.g. LLC-loads/LLC-load-misses ...) in guest to trigger offcore_rsp #GP Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Mark Davies <junk@eslaf.co.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: Yan, Zheng <zheng.z.yan@intel.com> Link: http://lkml.kernel.org/r/1405365957-20202-1-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-03 21:36:21 +0000