aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/Kconfig
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/arm/Kconfig
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'arch/arm/Kconfig')
-rw-r--r--arch/arm/Kconfig736
1 files changed, 736 insertions, 0 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
new file mode 100644
index 00000000000..4055115ae0e
--- /dev/null
+++ b/arch/arm/Kconfig
@@ -0,0 +1,736 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "Linux Kernel Configuration"
+
+config ARM
+ bool
+ default y
+ help
+ The ARM series is a line of low-power-consumption RISC chip designs
+ licensed by ARM ltd and targeted at embedded applications and
+ handhelds such as the Compaq IPAQ. ARM-based PCs are no longer
+ manufactured, but legacy ARM-based PC hardware remains popular in
+ Europe. There is an ARM Linux project with a web page at
+ <http://www.arm.linux.org.uk/>.
+
+config MMU
+ bool
+ default y
+
+config EISA
+ bool
+ ---help---
+ The Extended Industry Standard Architecture (EISA) bus was
+ developed as an open alternative to the IBM MicroChannel bus.
+
+ The EISA bus provided some of the features of the IBM MicroChannel
+ bus while maintaining backward compatibility with cards made for
+ the older ISA bus. The EISA bus saw limited use between 1988 and
+ 1995 when it was made obsolete by the PCI bus.
+
+ Say Y here if you are building a kernel for an EISA-based machine.
+
+ Otherwise, say N.
+
+config SBUS
+ bool
+
+config MCA
+ bool
+ help
+ MicroChannel Architecture is found in some IBM PS/2 machines and
+ laptops. It is a bus system similar to PCI or ISA. See
+ <file:Documentation/mca.txt> (and especially the web page given
+ there) before attempting to build an MCA bus kernel.
+
+config UID16
+ bool
+ default y
+
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ default y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config GENERIC_BUST_SPINLOCK
+ bool
+
+config GENERIC_ISA_DMA
+ bool
+
+config GENERIC_IOMAP
+ bool
+ default y
+
+config FIQ
+ bool
+
+source "init/Kconfig"
+
+menu "System Type"
+
+choice
+ prompt "ARM system type"
+ default ARCH_RPC
+
+config ARCH_CLPS7500
+ bool "Cirrus-CL-PS7500FE"
+ select TIMER_ACORN
+
+config ARCH_CLPS711X
+ bool "CLPS711x/EP721x-based"
+
+config ARCH_CO285
+ bool "Co-EBSA285"
+ select FOOTBRIDGE
+ select FOOTBRIDGE_ADDIN
+
+config ARCH_EBSA110
+ bool "EBSA-110"
+ help
+ This is an evaluation board for the StrongARM processor available
+ from Digital. It has limited hardware on-board, including an onboard
+ Ethernet interface, two PCMCIA sockets, two serial ports and a
+ parallel port.
+
+config ARCH_CAMELOT
+ bool "Epxa10db"
+ help
+ This enables support for Altera's Excalibur XA10 development board.
+ If you would like to build your kernel to run on one of these boards
+ then you must say 'Y' here. Otherwise say 'N'
+
+config ARCH_FOOTBRIDGE
+ bool "FootBridge"
+ select FOOTBRIDGE
+
+config ARCH_INTEGRATOR
+ bool "Integrator"
+ select ARM_AMBA
+ select ICST525
+
+config ARCH_IOP3XX
+ bool "IOP3xx-based"
+
+config ARCH_IXP4XX
+ bool "IXP4xx-based"
+ select DMABOUNCE
+
+config ARCH_IXP2000
+ bool "IXP2400/2800-based"
+
+config ARCH_L7200
+ bool "LinkUp-L7200"
+ select FIQ
+ help
+ Say Y here if you intend to run this kernel on a LinkUp Systems
+ L7200 Software Development Board which uses an ARM720T processor.
+ Information on this board can be obtained at:
+
+ <http://www.linkupsys.com/>
+
+ If you have any questions or comments about the Linux kernel port
+ to this board, send e-mail to <sjhill@cotw.com>.
+
+config ARCH_PXA
+ bool "PXA2xx-based"
+
+config ARCH_RPC
+ bool "RiscPC"
+ select ARCH_ACORN
+ select FIQ
+ select TIMER_ACORN
+ help
+ On the Acorn Risc-PC, Linux can support the internal IDE disk and
+ CD-ROM interface, serial and parallel port, and the floppy drive.
+
+config ARCH_SA1100
+ bool "SA1100-based"
+
+config ARCH_S3C2410
+ bool "Samsung S3C2410"
+ help
+ Samsung S3C2410X CPU based systems, such as the Simtec Electronics
+ BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
+ the Samsung SMDK2410 development board (and derviatives).
+
+config ARCH_SHARK
+ bool "Shark"
+
+config ARCH_LH7A40X
+ bool "Sharp LH7A40X"
+ help
+ Say Y here for systems based on one of the Sharp LH7A40X
+ System on a Chip processors. These CPUs include an ARM922T
+ core with a wide array of integrated devices for
+ hand-held and low-power applications.
+
+config ARCH_OMAP
+ bool "TI OMAP"
+
+config ARCH_VERSATILE
+ bool "Versatile"
+ select ARM_AMBA
+ select ICST307
+ help
+ This enables support for ARM Ltd Versatile board.
+
+config ARCH_IMX
+ bool "IMX"
+
+config ARCH_H720X
+ bool "Hynix-HMS720x-based"
+ help
+ This enables support for systems based on the Hynix HMS720x
+
+endchoice
+
+source "arch/arm/mach-clps711x/Kconfig"
+
+source "arch/arm/mach-epxa10db/Kconfig"
+
+source "arch/arm/mach-footbridge/Kconfig"
+
+source "arch/arm/mach-integrator/Kconfig"
+
+source "arch/arm/mach-iop3xx/Kconfig"
+
+source "arch/arm/mach-ixp4xx/Kconfig"
+
+source "arch/arm/mach-ixp2000/Kconfig"
+
+source "arch/arm/mach-pxa/Kconfig"
+
+source "arch/arm/mach-sa1100/Kconfig"
+
+source "arch/arm/mach-omap/Kconfig"
+
+source "arch/arm/mach-s3c2410/Kconfig"
+
+source "arch/arm/mach-lh7a40x/Kconfig"
+
+source "arch/arm/mach-imx/Kconfig"
+
+source "arch/arm/mach-h720x/Kconfig"
+
+source "arch/arm/mach-versatile/Kconfig"
+
+# Definitions to make life easier
+config ARCH_ACORN
+ bool
+
+source arch/arm/mm/Kconfig
+
+# bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER
+config XSCALE_PMU
+ bool
+ depends on CPU_XSCALE && !XSCALE_PMU_TIMER
+ default y
+
+endmenu
+
+source "arch/arm/common/Kconfig"
+
+config FORCE_MAX_ZONEORDER
+ int
+ depends on SA1111
+ default "9"
+
+menu "Bus support"
+
+config ARM_AMBA
+ bool
+
+config ISA
+ bool
+ depends on FOOTBRIDGE_HOST || ARCH_SHARK || ARCH_CLPS7500 || ARCH_EBSA110 || ARCH_CDB89712 || ARCH_EDB7211 || ARCH_SA1100 || ARCH_MX1ADS
+ default y
+ help
+ Find out whether you have ISA slots on your motherboard. ISA is the
+ name of a bus system, i.e. the way the CPU talks to the other stuff
+ inside your box. Other bus systems are PCI, EISA, MicroChannel
+ (MCA) or VESA. ISA is an older system, now being displaced by PCI;
+ newer boards don't support it. If you have ISA, say Y, otherwise N.
+
+config ISA_DMA
+ bool
+ depends on FOOTBRIDGE_HOST || ARCH_SHARK
+ default y
+
+config PCI
+ bool "PCI support" if ARCH_INTEGRATOR_AP
+ default y if ARCH_SHARK || FOOTBRIDGE_HOST || ARCH_IOP3XX || ARCH_IXP4XX || ARCH_IXP2000
+ help
+ Find out whether you have a PCI motherboard. PCI is the name of a
+ bus system, i.e. the way the CPU talks to the other stuff inside
+ your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+ VESA. If you have PCI, say Y, otherwise N.
+
+ The PCI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, contains valuable
+ information about which PCI hardware does work under Linux and which
+ doesn't.
+
+# Select the host bridge type
+config PCI_HOST_VIA82C505
+ bool
+ depends on PCI && ARCH_SHARK
+ default y
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+endmenu
+
+menu "Kernel Features"
+
+config SMP
+ bool "Symmetric Multi-Processing (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && n
+ help
+ This enables support for systems with more than one CPU. If you have
+ a system with only one CPU, like most personal computers, say N. If
+ you have a system with more than one CPU, say Y.
+
+ If you say N here, the kernel will run on single and multiprocessor
+ machines, but will use only one CPU of a multiprocessor machine. If
+ you say Y here, the kernel will run on many, but not all, single
+ processor machines. On a single processor machine, the kernel will
+ run faster if you say N here.
+
+ See also the <file:Documentation/smp.tex>,
+ <file:Documentation/smp.txt>, <file:Documentation/i386/IO-APIC.txt>,
+ <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+ <http://www.linuxdoc.org/docs.html#howto>.
+
+ If you don't know what to do here, say N.
+
+config NR_CPUS
+ int "Maximum number of CPUs (2-32)"
+ range 2 32
+ depends on SMP
+ default "4"
+
+config PREEMPT
+ bool "Preemptible Kernel (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ This option reduces the latency of the kernel when reacting to
+ real-time or interactive events by allowing a low priority process to
+ be preempted even if it is in kernel mode executing a system call.
+ This allows applications to run more reliably even when the system is
+ under load.
+
+ Say Y here if you are building a kernel for a desktop, embedded
+ or real-time system. Say N if you are unsure.
+
+config DISCONTIGMEM
+ bool
+ depends on ARCH_EDB7211 || ARCH_SA1100 || (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)
+ default y
+ help
+ Say Y to support efficient handling of discontiguous physical memory,
+ for architectures which are either NUMA (Non-Uniform Memory Access)
+ or have huge holes in the physical address space for other reasons.
+ See <file:Documentation/vm/numa> for more.
+
+config LEDS
+ bool "Timer and CPU usage LEDs"
+ depends on ARCH_CDB89712 || ARCH_CO285 || ARCH_EBSA110 || \
+ ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
+ ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
+ ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
+ ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE
+ help
+ If you say Y here, the LEDs on your machine will be used
+ to provide useful information about your current system status.
+
+ If you are compiling a kernel for a NetWinder or EBSA-285, you will
+ be able to select which LEDs are active using the options below. If
+ you are compiling a kernel for the EBSA-110 or the LART however, the
+ red LED will simply flash regularly to indicate that the system is
+ still functional. It is safe to say Y here if you have a CATS
+ system, but the driver will do nothing.
+
+config LEDS_TIMER
+ bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
+ MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
+ depends on LEDS
+ default y if ARCH_EBSA110
+ help
+ If you say Y here, one of the system LEDs (the green one on the
+ NetWinder, the amber one on the EBSA285, or the red one on the LART)
+ will flash regularly to indicate that the system is still
+ operational. This is mainly useful to kernel hackers who are
+ debugging unstable kernels.
+
+ The LART uses the same LED for both Timer LED and CPU usage LED
+ functions. You may choose to use both, but the Timer LED function
+ will overrule the CPU usage LED.
+
+config LEDS_CPU
+ bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
+ !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
+ depends on LEDS
+ help
+ If you say Y here, the red LED will be used to give a good real
+ time indication of CPU usage, by lighting whenever the idle task
+ is not currently executing.
+
+ The LART uses the same LED for both Timer LED and CPU usage LED
+ functions. You may choose to use both, but the Timer LED function
+ will overrule the CPU usage LED.
+
+config ALIGNMENT_TRAP
+ bool
+ default y if !ARCH_EBSA110
+ help
+ ARM processors can not fetch/store information which is not
+ naturally aligned on the bus, i.e., a 4 byte fetch must start at an
+ address divisible by 4. On 32-bit ARM processors, these non-aligned
+ fetch/store instructions will be emulated in software if you say
+ here, which has a severe performance impact. This is necessary for
+ correct operation of some network protocols. With an IP-only
+ configuration it is safe to say N, otherwise say Y.
+
+endmenu
+
+menu "Boot options"
+
+# Compressed boot loader in ROM. Yes, we really want to ask about
+# TEXT and BSS so we preserve their values in the config files.
+config ZBOOT_ROM_TEXT
+ hex "Compressed ROM boot loader base address"
+ default "0"
+ help
+ The physical address at which the ROM-able zImage is to be
+ placed in the target. Platforms which normally make use of
+ ROM-able zImage formats normally set this to a suitable
+ value in their defconfig file.
+
+ If ZBOOT_ROM is not enabled, this has no effect.
+
+config ZBOOT_ROM_BSS
+ hex "Compressed ROM boot loader BSS address"
+ default "0"
+ help
+ The base address of 64KiB of read/write memory in the target
+ for the ROM-able zImage, which must be available while the
+ decompressor is running. Platforms which normally make use of
+ ROM-able zImage formats normally set this to a suitable
+ value in their defconfig file.
+
+ If ZBOOT_ROM is not enabled, this has no effect.
+
+config ZBOOT_ROM
+ bool "Compressed boot loader in ROM/flash"
+ depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS
+ help
+ Say Y here if you intend to execute your compressed kernel image
+ (zImage) directly from ROM or flash. If unsure, say N.
+
+config CMDLINE
+ string "Default kernel command string"
+ default ""
+ help
+ On some architectures (EBSA110 and CATS), there is currently no way
+ for the boot loader to pass arguments to the kernel. For these
+ architectures, you should supply some command-line options at build
+ time by entering them here. As a minimum, you should specify the
+ memory size and the root device (e.g., mem=64M root=/dev/nfs).
+
+config XIP_KERNEL
+ bool "Kernel Execute-In-Place from ROM"
+ depends on !ZBOOT_ROM
+ help
+ Execute-In-Place allows the kernel to run from non-volatile storage
+ directly addressable by the CPU, such as NOR flash. This saves RAM
+ space since the text section of the kernel is not loaded from flash
+ to RAM. Read-write sections, such as the data section and stack,
+ are still copied to RAM. The XIP kernel is not compressed since
+ it has to run directly from flash, so it will take more space to
+ store it. The flash address used to link the kernel object files,
+ and for storing it, is configuration dependent. Therefore, if you
+ say Y here, you must know the proper physical address where to
+ store the kernel image depending on your own flash memory usage.
+
+ Also note that the make target becomes "make xipImage" rather than
+ "make zImage" or "make Image". The final kernel binary to put in
+ ROM memory will be arch/arm/boot/xipImage.
+
+ If unsure, say N.
+
+config XIP_PHYS_ADDR
+ hex "XIP Kernel Physical Location"
+ depends on XIP_KERNEL
+ default "0x00080000"
+ help
+ This is the physical address in your flash memory the kernel will
+ be linked for and stored to. This address is dependent on your
+ own flash usage.
+
+endmenu
+
+if (ARCH_SA1100 || ARCH_INTEGRATOR)
+
+menu "CPU Frequency scaling"
+
+source "drivers/cpufreq/Kconfig"
+
+config CPU_FREQ_SA1100
+ bool
+ depends on CPU_FREQ && (SA1100_LART || SA1100_PLEB)
+ default y
+
+config CPU_FREQ_SA1110
+ bool
+ depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3)
+ default y
+
+config CPU_FREQ_INTEGRATOR
+ tristate "CPUfreq driver for ARM Integrator CPUs"
+ depends on ARCH_INTEGRATOR && CPU_FREQ
+ default y
+ help
+ This enables the CPUfreq driver for ARM Integrator CPUs.
+
+ For details, take a look at <file:Documentation/cpu-freq>.
+
+ If in doubt, say Y.
+
+endmenu
+
+endif
+
+menu "Floating point emulation"
+
+comment "At least one emulation must be selected"
+
+config FPE_NWFPE
+ bool "NWFPE math emulation"
+ ---help---
+ Say Y to include the NWFPE floating point emulator in the kernel.
+ This is necessary to run most binaries. Linux does not currently
+ support floating point hardware so you need to say Y here even if
+ your machine has an FPA or floating point co-processor podule.
+
+ You may say N here if you are going to load the Acorn FPEmulator
+ early in the bootup.
+
+config FPE_NWFPE_XP
+ bool "Support extended precision"
+ depends on FPE_NWFPE && !CPU_BIG_ENDIAN
+ help
+ Say Y to include 80-bit support in the kernel floating-point
+ emulator. Otherwise, only 32 and 64-bit support is compiled in.
+ Note that gcc does not generate 80-bit operations by default,
+ so in most cases this option only enlarges the size of the
+ floating point emulator without any good reason.
+
+ You almost surely want to say N here.
+
+config FPE_FASTFPE
+ bool "FastFPE math emulation (EXPERIMENTAL)"
+ depends on !CPU_32v3 && EXPERIMENTAL
+ ---help---
+ Say Y here to include the FAST floating point emulator in the kernel.
+ This is an experimental much faster emulator which now also has full
+ precision for the mantissa. It does not support any exceptions.
+ It is very simple, and approximately 3-6 times faster than NWFPE.
+
+ It should be sufficient for most programs. It may be not suitable
+ for scientific calculations, but you have to check this for yourself.
+ If you do not feel you need a faster FP emulation you should better
+ choose NWFPE.
+
+config VFP
+ bool "VFP-format floating point maths"
+ depends on CPU_V6 || CPU_ARM926T
+ help
+ Say Y to include VFP support code in the kernel. This is needed
+ if your hardware includes a VFP unit.
+
+ Please see <file:Documentation/arm/VFP/release-notes.txt> for
+ release notes and additional status information.
+
+ Say N if your target does not have VFP hardware.
+
+endmenu
+
+menu "Userspace binary formats"
+
+source "fs/Kconfig.binfmt"
+
+config ARTHUR
+ tristate "RISC OS personality"
+ help
+ Say Y here to include the kernel code necessary if you want to run
+ Acorn RISC OS/Arthur binaries under Linux. This code is still very
+ experimental; if this sounds frightening, say N and sleep in peace.
+ You can also say M here to compile this support as a module (which
+ will be called arthur).
+
+endmenu
+
+menu "Power management options"
+
+config PM
+ bool "Power Management support"
+ ---help---
+ "Power Management" means that parts of your computer are shut
+ off or put into a power conserving "sleep" mode if they are not
+ being used. There are two competing standards for doing this: APM
+ and ACPI. If you want to use either one, say Y here and then also
+ to the requisite support below.
+
+ Power Management is most important for battery powered laptop
+ computers; if you have a laptop, check out the Linux Laptop home
+ page on the WWW at <http://www.linux-on-laptops.com/> or
+ Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>
+ and the Battery Powered Linux mini-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that, even if you say N here, Linux on the x86 architecture
+ will issue the hlt instruction if nothing is to be done, thereby
+ sending the processor to sleep and saving power.
+
+config APM
+ tristate "Advanced Power Management Emulation"
+ depends on PM
+ ---help---
+ APM is a BIOS specification for saving power using several different
+ techniques. This is mostly useful for battery powered laptops with
+ APM compliant BIOSes. If you say Y here, the system time will be
+ reset after a RESUME operation, the /proc/apm device will provide
+ battery status information, and user-space programs will receive
+ notification of APM "events" (e.g. battery status change).
+
+ If you select "Y" here, you can disable actual use of the APM
+ BIOS by passing the "apm=off" option to the kernel at boot time.
+
+ Note that the APM support is almost completely disabled for
+ machines with more than one CPU.
+
+ In order to use APM, you will need supporting software. For location
+ and more information, read <file:Documentation/pm.txt> and the
+ Battery Powered Linux mini-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ This driver does not spin down disk drives (see the hdparm(8)
+ manpage ("man 8 hdparm") for that), and it doesn't turn off
+ VESA-compliant "green" monitors.
+
+ This driver does not support the TI 4000M TravelMate and the ACER
+ 486/DX4/75 because they don't have compliant BIOSes. Many "green"
+ desktop machines also don't have compliant BIOSes, and this driver
+ may cause those machines to panic during the boot phase.
+
+ Generally, if you don't have a battery in your machine, there isn't
+ much point in using this driver and you should say N. If you get
+ random kernel OOPSes or reboots that don't seem to be related to
+ anything, try disabling/enabling this option (or disabling/enabling
+ APM in your BIOS).
+
+ Some other things you should try when experiencing seemingly random,
+ "weird" problems:
+
+ 1) make sure that you have enough swap space and that it is
+ enabled.
+ 2) pass the "no-hlt" option to the kernel
+ 3) switch on floating point emulation in the kernel and pass
+ the "no387" option to the kernel
+ 4) pass the "floppy=nodma" option to the kernel
+ 5) pass the "mem=4M" option to the kernel (thereby disabling
+ all but the first 4 MB of RAM)
+ 6) make sure that the CPU is not over clocked.
+ 7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
+ 8) disable the cache from your BIOS settings
+ 9) install a fan for the video card or exchange video RAM
+ 10) install a better fan for the CPU
+ 11) exchange RAM chips
+ 12) exchange the motherboard.
+
+ To compile this driver as a module, choose M here: the
+ module will be called apm.
+
+endmenu
+
+menu "Device Drivers"
+
+source "drivers/base/Kconfig"
+
+if ALIGNMENT_TRAP
+source "drivers/mtd/Kconfig"
+endif
+
+source "drivers/parport/Kconfig"
+
+source "drivers/pnp/Kconfig"
+
+source "drivers/block/Kconfig"
+
+source "drivers/acorn/block/Kconfig"
+
+if ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
+source "drivers/ide/Kconfig"
+endif
+
+source "drivers/scsi/Kconfig"
+
+source "drivers/md/Kconfig"
+
+source "drivers/message/fusion/Kconfig"
+
+source "drivers/ieee1394/Kconfig"
+
+source "drivers/message/i2o/Kconfig"
+
+source "net/Kconfig"
+
+source "drivers/isdn/Kconfig"
+
+# input before char - char/joystick depends on it. As does USB.
+
+source "drivers/input/Kconfig"
+
+source "drivers/char/Kconfig"
+
+source "drivers/i2c/Kconfig"
+
+#source "drivers/l3/Kconfig"
+
+source "drivers/misc/Kconfig"
+
+source "drivers/media/Kconfig"
+
+source "drivers/video/Kconfig"
+
+source "sound/Kconfig"
+
+source "drivers/usb/Kconfig"
+
+source "drivers/mmc/Kconfig"
+
+endmenu
+
+source "fs/Kconfig"
+
+source "arch/arm/oprofile/Kconfig"
+
+source "arch/arm/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"