diff options
Diffstat (limited to 'Silicon/Intel/SimicsIch10Pkg/Include')
8 files changed, 1655 insertions, 0 deletions
diff --git a/Silicon/Intel/SimicsIch10Pkg/Include/Library/SpiFlashCommonLib.h b/Silicon/Intel/SimicsIch10Pkg/Include/Library/SpiFlashCommonLib.h new file mode 100644 index 00000000..53c11bb5 --- /dev/null +++ b/Silicon/Intel/SimicsIch10Pkg/Include/Library/SpiFlashCommonLib.h @@ -0,0 +1,98 @@ +/** @file
+ The header file includes the common header files, defines
+ internal structure and functions used by SpiFlashCommonLib.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef __SPI_FLASH_COMMON_LIB_H__
+#define __SPI_FLASH_COMMON_LIB_H__
+
+#include <Uefi.h>
+#include <Library/BaseLib.h>
+#include <Library/PcdLib.h>
+#include <Library/DebugLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiDriverEntryPoint.h>
+#include <Library/UefiBootServicesTableLib.h>
+
+#define SECTOR_SIZE_4KB 0x1000 // Common 4kBytes sector size
+/**
+ Enable block protection on the Serial Flash device.
+
+ @retval EFI_SUCCESS Opertion is successful.
+ @retval EFI_DEVICE_ERROR If there is any device errors.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiFlashLock (
+ VOID
+ );
+
+/**
+ Read NumBytes bytes of data from the address specified by
+ PAddress into Buffer.
+
+ @param[in] Address The starting physical address of the read.
+ @param[in,out] NumBytes On input, the number of bytes to read. On output, the number
+ of bytes actually read.
+ @param[out] Buffer The destination data buffer for the read.
+
+ @retval EFI_SUCCESS Opertion is successful.
+ @retval EFI_DEVICE_ERROR If there is any device errors.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiFlashRead (
+ IN UINTN Address,
+ IN OUT UINT32 *NumBytes,
+ OUT UINT8 *Buffer
+ );
+
+/**
+ Write NumBytes bytes of data from Buffer to the address specified by
+ PAddresss.
+
+ @param[in] Address The starting physical address of the write.
+ @param[in,out] NumBytes On input, the number of bytes to write. On output,
+ the actual number of bytes written.
+ @param[in] Buffer The source data buffer for the write.
+
+ @retval EFI_SUCCESS Opertion is successful.
+ @retval EFI_DEVICE_ERROR If there is any device errors.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiFlashWrite (
+ IN UINTN Address,
+ IN OUT UINT32 *NumBytes,
+ IN UINT8 *Buffer
+ );
+
+/**
+ Erase the block starting at Address.
+
+ @param[in] Address The starting physical address of the block to be erased.
+ This library assume that caller garantee that the PAddress
+ is at the starting address of this block.
+ @param[in] NumBytes On input, the number of bytes of the logical block to be erased.
+ On output, the actual number of bytes erased.
+
+ @retval EFI_SUCCESS. Opertion is successful.
+ @retval EFI_DEVICE_ERROR If there is any device errors.
+
+**/
+EFI_STATUS
+EFIAPI
+SpiFlashBlockErase (
+ IN UINTN Address,
+ IN UINTN *NumBytes
+ );
+
+#endif
diff --git a/Silicon/Intel/SimicsIch10Pkg/Include/PchAccess.h b/Silicon/Intel/SimicsIch10Pkg/Include/PchAccess.h new file mode 100644 index 00000000..8be6ecd8 --- /dev/null +++ b/Silicon/Intel/SimicsIch10Pkg/Include/PchAccess.h @@ -0,0 +1,43 @@ +/** @file
+ Macros that simplify accessing PCH devices's PCI registers.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _PCH_ACCESS_H_
+#define _PCH_ACCESS_H_
+
+#include "PchReservedResources.h"
+
+#ifndef STALL_ONE_MICRO_SECOND
+#define STALL_ONE_MICRO_SECOND 1
+#endif
+#ifndef STALL_ONE_SECOND
+#define STALL_ONE_SECOND 1000000
+#endif
+
+
+///
+/// The default PCH PCI bus number
+///
+#define DEFAULT_PCI_BUS_NUMBER_PCH 0
+
+//
+// Default Vendor ID and Subsystem ID
+//
+#define V_PCH_INTEL_VENDOR_ID 0x8086 ///< Default Intel PCH Vendor ID
+#define V_PCH_DEFAULT_SID 0x7270 ///< Default Intel PCH Subsystem ID
+#define V_PCH_DEFAULT_SVID_SID (V_INTEL_VENDOR_ID + (V_PCH_DEFAULT_SID << 16)) ///< Default INTEL PCH Vendor ID and Subsystem ID
+
+//
+// Include device register definitions
+//
+
+#include "Register/PchRegsPmc.h"
+
+#include "Register/PchRegsSpi.h"
+
+#endif
+
diff --git a/Silicon/Intel/SimicsIch10Pkg/Include/PchLimits.h b/Silicon/Intel/SimicsIch10Pkg/Include/PchLimits.h new file mode 100644 index 00000000..35bb5741 --- /dev/null +++ b/Silicon/Intel/SimicsIch10Pkg/Include/PchLimits.h @@ -0,0 +1,94 @@ +/** @file
+ Build time limits of PCH resources.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _PCH_LIMITS_H_
+#define _PCH_LIMITS_H_
+
+//
+// PCIe limits
+//
+#define PCH_MAX_PCIE_ROOT_PORTS PCH_H_PCIE_MAX_ROOT_PORTS
+#define PCH_H_PCIE_MAX_ROOT_PORTS 20
+#define PCH_LP_PCIE_MAX_ROOT_PORTS 12
+
+#define PCH_MAX_PCIE_CONTROLLERS PCH_H_PCIE_MAX_CONTROLLERS
+#define PCH_PCIE_CONTROLLER_PORTS 4
+#define PCH_H_PCIE_MAX_CONTROLLERS (PCH_H_PCIE_MAX_ROOT_PORTS / PCH_PCIE_CONTROLLER_PORTS)
+#define PCH_LP_PCIE_MAX_CONTROLLERS (PCH_LP_PCIE_MAX_ROOT_PORTS / PCH_PCIE_CONTROLLER_PORTS)
+
+//
+// PCIe clocks limits
+//
+#define PCH_LP_PCIE_MAX_CLK_REQ 6
+#define PCH_H_PCIE_MAX_CLK_REQ 16
+
+//
+// RST PCIe Storage Cycle Router limits
+//
+#define PCH_MAX_RST_PCIE_STORAGE_CR 3
+
+//
+// SATA limits
+//
+#define PCH_MAX_SATA_PORTS PCH_H_AHCI_MAX_PORTS
+#define PCH_H_AHCI_MAX_PORTS 8 ///< Max number of sata ports in SKL PCH H
+#define PCH_LP_AHCI_MAX_PORTS 3 ///< Max number of sata ports in SKL PCH LP
+#define PCH_SATA_MAX_DEVICES_PER_PORT 1 ///< Max support device numner per port, Port Multiplier is not support.
+
+//
+// USB limits
+//
+#define PCH_MAX_USB2_PORTS PCH_H_XHCI_MAX_USB2_PORTS
+
+#define PCH_H_XHCI_MAX_USB2_PHYSICAL_PORTS 14 ///< Max Physical Connector XHCI, not counting virtual ports like USB-R.
+#define PCH_LP_XHCI_MAX_USB2_PHYSICAL_PORTS 10 ///< Max Physical Connector XHCI, not counting virtual ports like USB-R.
+
+#define PCH_H_XHCI_MAX_USB2_PORTS 16 ///< 14 High Speed lanes + Including two ports reserved for USBr
+#define PCH_LP_XHCI_MAX_USB2_PORTS 12 ///< 10 High Speed lanes + Including two ports reserved for USBr
+
+#define PCH_MAX_USB3_PORTS PCH_H_XHCI_MAX_USB3_PORTS
+
+#define PCH_H_XHCI_MAX_USB3_PORTS 10 ///< 10 Super Speed lanes
+#define PCH_LP_XHCI_MAX_USB3_PORTS 6 ///< 6 Super Speed lanes
+
+#define PCH_XHCI_MAX_SSIC_PORT_COUNT 2 ///< 2 SSIC ports in SKL PCH-LP and SKL PCH-H
+
+//
+// SerialIo limits
+//
+#define PCH_SERIALIO_MAX_CONTROLLERS 11 ///< Number of SerialIo controllers, this includes I2C, SPI and UART
+#define PCH_SERIALIO_MAX_I2C_CONTROLLERS 6 ///< Number of SerialIo I2C controllers
+#define PCH_LP_SERIALIO_MAX_I2C_CONTROLLERS 6 ///< Number of SerialIo I2C controllers for PCH-LP
+#define PCH_H_SERIALIO_MAX_I2C_CONTROLLERS 4 ///< Number of SerialIo I2C controllers for PCH-H
+#define PCH_SERIALIO_MAX_SPI_CONTROLLERS 2 ///< Number of SerialIo SPI controllers
+#define PCH_SERIALIO_MAX_UART_CONTROLLERS 3 ///< Number of SerialIo UART controllers
+
+//
+// ISH limits
+//
+#define PCH_ISH_MAX_GP_PINS 8
+#define PCH_ISH_MAX_UART_CONTROLLERS 2
+#define PCH_ISH_MAX_I2C_CONTROLLERS 3
+#define PCH_ISH_MAX_SPI_CONTROLLERS 1
+
+//
+// SCS limits
+//
+#define PCH_SCS_MAX_CONTROLLERS 3 ///< Number of Storage and Communication Subsystem controllers, this includes eMMC, SDIO, SDCARD
+
+//
+// Flash Protection Range Register
+//
+#define PCH_FLASH_PROTECTED_RANGES 5
+
+//
+// Number of eSPI slaves
+//
+#define PCH_ESPI_MAX_SLAVE_ID 2
+#endif // _PCH_LIMITS_H_
+
diff --git a/Silicon/Intel/SimicsIch10Pkg/Include/PchReservedResources.h b/Silicon/Intel/SimicsIch10Pkg/Include/PchReservedResources.h new file mode 100644 index 00000000..5e978237 --- /dev/null +++ b/Silicon/Intel/SimicsIch10Pkg/Include/PchReservedResources.h @@ -0,0 +1,60 @@ +/** @file
+ PCH preserved MMIO resource definitions.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _PCH_PRESERVED_RESOURCES_H_
+#define _PCH_PRESERVED_RESOURCES_H_
+
+/**
+ PCH preserved MMIO range, 24 MB, from 0xFD000000 to 0xFE7FFFFF
+
+ Detailed recommended static allocation
+ +-------------------------------------------------------------------------+
+ | Size | Start | End | Usage |
+ | 16 MB | 0xFD000000 | 0xFDFFFFFF | SBREG |
+ | 64 KB | 0xFE000000 | 0xFE00FFFF | PMC MBAR |
+ | 4 KB | 0xFE010000 | 0xFE010FFF | SPI BAR0 |
+ | 88 KB | 0xFE020000 | 0xFE035FFF | SerialIo BAR in ACPI mode |
+ | 24 KB | 0xFE036000 | 0xFE03BFFF | Unused |
+ | 4 KB | 0xFE03C000 | 0xFE03CFFF | Thermal Device in ACPI mode |
+ | 524 KB | 0xFE03D000 | 0xFE0BFFFF | Unused |
+ | 256 KB | 0xFE0C0000 | 0xFE0FFFFF | TraceHub FW BAR |
+ | 1 MB | 0xFE100000 | 0xFE1FFFFF | TraceHub MTB BAR |
+ | 2 MB | 0xFE200000 | 0xFE3FFFFF | TraceHub SW BAR |
+ | 64 KB | 0xFE400000 | 0xFE40FFFF | CIO2 MMIO BAR in ACPI mode |
+ | 2 MB - 64KB | 0xFE410000 | 0xFE5FFFFF | Unused |
+ | 2 MB | 0xFE600000 | 0xFE7FFFFF | Temp address |
+ +-------------------------------------------------------------------------+
+**/
+#define PCH_PRESERVED_BASE_ADDRESS 0xFD000000 ///< Pch preserved MMIO base address
+#define PCH_PRESERVED_MMIO_SIZE 0x01800000 ///< 24MB
+#define PCH_PCR_BASE_ADDRESS 0xFD000000 ///< SBREG MMIO base address
+#define PCH_PCR_MMIO_SIZE 0x01000000 ///< 16MB
+#define PCH_PWRM_BASE_ADDRESS 0xFE000000 ///< PMC MBAR MMIO base address
+#define PCH_PWRM_MMIO_SIZE 0x00010000 ///< 64KB
+#define PCH_SPI_BASE_ADDRESS 0xFED1C000 + 0x3800 ///< SPI MBAR MMIO base address
+#define PCH_SPI_MMIO_SIZE 0x00001000 ///< 4KB
+#define PCH_SERIAL_IO_BASE_ADDRESS 0xFE020000 ///< SerialIo MMIO base address
+#define PCH_SERIAL_IO_MMIO_SIZE 0x00016000 ///< 88KB
+#define PCH_THERMAL_BASE_ADDRESS 0xFE03C000 ///< Thermal Device in ACPI mode
+#define PCH_THERMAL_MMIO_SIZE 0x00001000 ///< 4KB
+#define PCH_TRACE_HUB_FW_BASE_ADDRESS 0xFE0C0000 ///< TraceHub FW MMIO base address
+#define PCH_TRACE_HUB_FW_MMIO_SIZE 0x00040000 ///< 256KB
+#define PCH_TRACE_HUB_MTB_BASE_ADDRESS 0xFE100000 ///< TraceHub MTB MMIO base address
+#define PCH_TRACE_HUB_MTB_MMIO_SIZE 0x00100000 ///< 1MB
+#define PCH_TRACE_HUB_SW_BASE_ADDRESS 0xFE200000 ///< TraceHub SW MMIO base address
+#define PCH_TRACE_HUB_SW_MMIO_SIZE 0x00200000 ///< 2MB
+#define PCH_CIO2_BASE_ADDRESS 0xFE400000 ///< CIO2 MMIO BAR in ACPI mode
+#define PCH_CIO2_MMIO_SIZE 0x00010000 ///< 64KB
+#define PCH_TEMP_BASE_ADDRESS 0xFE600000 ///< preserved temp address for misc usage
+#define PCH_TEMP_MMIO_SIZE 0x00200000 ///< 2MB
+
+#define RCRB 0xFED1C000
+#define SPIBAR 0x3800
+
+#endif // _PCH_PRESERVED_RESOURCES_H_
+
diff --git a/Silicon/Intel/SimicsIch10Pkg/Include/Protocol/Spi.h b/Silicon/Intel/SimicsIch10Pkg/Include/Protocol/Spi.h new file mode 100644 index 00000000..b0c5b3d0 --- /dev/null +++ b/Silicon/Intel/SimicsIch10Pkg/Include/Protocol/Spi.h @@ -0,0 +1,295 @@ +/** @file
+ This file defines the PCH SPI Protocol which implements the
+ Intel(R) PCH SPI Host Controller Compatibility Interface.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _PCH_SPI_PROTOCOL_H_
+#define _PCH_SPI_PROTOCOL_H_
+
+//
+// Extern the GUID for protocol users.
+//
+extern EFI_GUID gEfiSpiProtocolGuid;
+extern EFI_GUID gEfiSmmSpiProtocolGuid;
+
+//
+// Forward reference for ANSI C compatibility
+//
+typedef struct _PCH_SPI_PROTOCOL EFI_SPI_PROTOCOL;
+
+//
+// SPI protocol data structures and definitions
+//
+
+/**
+ Flash Region Type
+**/
+typedef enum {
+ FlashRegionDescriptor,
+ FlashRegionBios,
+ FlashRegionMe,
+ FlashRegionGbE,
+ FlashRegionPlatformData,
+ FlashRegionDer,
+ FlashRegionAll,
+ FlashRegionMax
+} FLASH_REGION_TYPE;
+
+
+//
+// Protocol member functions
+//
+
+/**
+ Read data from the flash part.
+
+ @param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
+ @param[in] FlashRegionType The Flash Region type for flash cycle which is listed in the Descriptor.
+ @param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
+ @param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
+ @param[out] Buffer The Pointer to caller-allocated buffer containing the dada received.
+ It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PCH_SPI_FLASH_READ) (
+ IN EFI_SPI_PROTOCOL *This,
+ IN FLASH_REGION_TYPE FlashRegionType,
+ IN UINT32 Address,
+ IN UINT32 ByteCount,
+ OUT UINT8 *Buffer
+ );
+
+/**
+ Write data to the flash part. Remark: Erase may be needed before write to the flash part.
+
+ @param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
+ @param[in] FlashRegionType The Flash Region type for flash cycle which is listed in the Descriptor.
+ @param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
+ @param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
+ @param[in] Buffer Pointer to caller-allocated buffer containing the data sent during the SPI cycle.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PCH_SPI_FLASH_WRITE) (
+ IN EFI_SPI_PROTOCOL *This,
+ IN FLASH_REGION_TYPE FlashRegionType,
+ IN UINT32 Address,
+ IN UINT32 ByteCount,
+ IN UINT8 *Buffer
+ );
+
+/**
+ Erase some area on the flash part.
+
+ @param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
+ @param[in] FlashRegionType The Flash Region type for flash cycle which is listed in the Descriptor.
+ @param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
+ @param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PCH_SPI_FLASH_ERASE) (
+ IN EFI_SPI_PROTOCOL *This,
+ IN FLASH_REGION_TYPE FlashRegionType,
+ IN UINT32 Address,
+ IN UINT32 ByteCount
+ );
+
+/**
+ Read SFDP data from the flash part.
+
+ @param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
+ @param[in] ComponentNumber The Componen Number for chip select
+ @param[in] Address The starting byte address for SFDP data read.
+ @param[in] ByteCount Number of bytes in SFDP data portion of the SPI cycle
+ @param[out] SfdpData The Pointer to caller-allocated buffer containing the SFDP data received
+ It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PCH_SPI_FLASH_READ_SFDP) (
+ IN EFI_SPI_PROTOCOL *This,
+ IN UINT8 ComponentNumber,
+ IN UINT32 Address,
+ IN UINT32 ByteCount,
+ OUT UINT8 *SfdpData
+ );
+
+/**
+ Read Jedec Id from the flash part.
+
+ @param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
+ @param[in] ComponentNumber The Componen Number for chip select
+ @param[in] ByteCount Number of bytes in JedecId data portion of the SPI cycle, the data size is 3 typically
+ @param[out] JedecId The Pointer to caller-allocated buffer containing JEDEC ID received
+ It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PCH_SPI_FLASH_READ_JEDEC_ID) (
+ IN EFI_SPI_PROTOCOL *This,
+ IN UINT8 ComponentNumber,
+ IN UINT32 ByteCount,
+ OUT UINT8 *JedecId
+ );
+
+/**
+ Write the status register in the flash part.
+
+ @param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
+ @param[in] ByteCount Number of bytes in Status data portion of the SPI cycle, the data size is 1 typically
+ @param[in] StatusValue The Pointer to caller-allocated buffer containing the value of Status register writing
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PCH_SPI_FLASH_WRITE_STATUS) (
+ IN EFI_SPI_PROTOCOL *This,
+ IN UINT32 ByteCount,
+ IN UINT8 *StatusValue
+ );
+
+/**
+ Read status register in the flash part.
+
+ @param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
+ @param[in] ByteCount Number of bytes in Status data portion of the SPI cycle, the data size is 1 typically
+ @param[out] StatusValue The Pointer to caller-allocated buffer containing the value of Status register received.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PCH_SPI_FLASH_READ_STATUS) (
+ IN EFI_SPI_PROTOCOL *This,
+ IN UINT32 ByteCount,
+ OUT UINT8 *StatusValue
+ );
+
+/**
+ Get the SPI region base and size, based on the enum type
+
+ @param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
+ @param[in] FlashRegionType The Flash Region type for for the base address which is listed in the Descriptor.
+ @param[out] BaseAddress The Flash Linear Address for the Region 'n' Base
+ @param[out] RegionSize The size for the Region 'n'
+
+ @retval EFI_SUCCESS Read success
+ @retval EFI_INVALID_PARAMETER Invalid region type given
+ @retval EFI_DEVICE_ERROR The region is not used
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PCH_SPI_GET_REGION_ADDRESS) (
+ IN EFI_SPI_PROTOCOL *This,
+ IN FLASH_REGION_TYPE FlashRegionType,
+ OUT UINT32 *BaseAddress,
+ OUT UINT32 *RegionSize
+ );
+
+/**
+ Read PCH Soft Strap Values
+
+ @param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
+ @param[in] SoftStrapAddr PCH Soft Strap address offset from FPSBA.
+ @param[in] ByteCount Number of bytes in SoftStrap data portion of the SPI cycle
+ @param[out] SoftStrapValue The Pointer to caller-allocated buffer containing PCH Soft Strap Value.
+ If the value of ByteCount is 0, the data type of SoftStrapValue should be UINT16 and SoftStrapValue will be PCH Soft Strap Length
+ It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PCH_SPI_READ_PCH_SOFTSTRAP) (
+ IN EFI_SPI_PROTOCOL *This,
+ IN UINT32 SoftStrapAddr,
+ IN UINT32 ByteCount,
+ OUT VOID *SoftStrapValue
+ );
+
+/**
+ Read CPU Soft Strap Values
+
+ @param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
+ @param[in] SoftStrapAddr CPU Soft Strap address offset from FCPUSBA.
+ @param[in] ByteCount Number of bytes in SoftStrap data portion of the SPI cycle.
+ @param[out] SoftStrapValue The Pointer to caller-allocated buffer containing CPU Soft Strap Value.
+ If the value of ByteCount is 0, the data type of SoftStrapValue should be UINT16 and SoftStrapValue will be PCH Soft Strap Length
+ It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
+
+ @retval EFI_SUCCESS Command succeed.
+ @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
+ @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *PCH_SPI_READ_CPU_SOFTSTRAP) (
+ IN EFI_SPI_PROTOCOL *This,
+ IN UINT32 SoftStrapAddr,
+ IN UINT32 ByteCount,
+ OUT VOID *SoftStrapValue
+ );
+
+/**
+ These protocols/PPI allows a platform module to perform SPI operations through the
+ Intel PCH SPI Host Controller Interface.
+**/
+struct _PCH_SPI_PROTOCOL {
+ /**
+ This member specifies the revision of this structure. This field is used to
+ indicate backwards compatible changes to the protocol.
+ **/
+ UINT8 Revision;
+ PCH_SPI_FLASH_READ FlashRead; ///< Read data from the flash part.
+ PCH_SPI_FLASH_WRITE FlashWrite; ///< Write data to the flash part. Remark: Erase may be needed before write to the flash part.
+ PCH_SPI_FLASH_ERASE FlashErase; ///< Erase some area on the flash part.
+ PCH_SPI_FLASH_READ_SFDP FlashReadSfdp; ///< Read SFDP data from the flash part.
+ PCH_SPI_FLASH_READ_JEDEC_ID FlashReadJedecId; ///< Read Jedec Id from the flash part.
+ PCH_SPI_FLASH_WRITE_STATUS FlashWriteStatus; ///< Write the status register in the flash part.
+ PCH_SPI_FLASH_READ_STATUS FlashReadStatus; ///< Read status register in the flash part.
+ PCH_SPI_GET_REGION_ADDRESS GetRegionAddress; ///< Get the SPI region base and size
+ PCH_SPI_READ_PCH_SOFTSTRAP ReadPchSoftStrap; ///< Read PCH Soft Strap Values
+ PCH_SPI_READ_CPU_SOFTSTRAP ReadCpuSoftStrap; ///< Read CPU Soft Strap Values
+};
+
+/**
+ PCH SPI PPI/PROTOCOL revision number
+
+ Revision 1: Initial version
+**/
+#define PCH_SPI_SERVICES_REVISION 1
+
+#endif
diff --git a/Silicon/Intel/SimicsIch10Pkg/Include/Register/PchRegsPmc.h b/Silicon/Intel/SimicsIch10Pkg/Include/Register/PchRegsPmc.h new file mode 100644 index 00000000..4c495475 --- /dev/null +++ b/Silicon/Intel/SimicsIch10Pkg/Include/Register/PchRegsPmc.h @@ -0,0 +1,647 @@ +/** @file
+ Register names for PCH PMC device
+
+ Conventions:
+
+ - Prefixes:
+ Definitions beginning with "R_" are registers
+ Definitions beginning with "B_" are bits within registers
+ Definitions beginning with "V_" are meaningful values within the bits
+ Definitions beginning with "S_" are register sizes
+ Definitions beginning with "N_" are the bit position
+ - In general, PCH registers are denoted by "_PCH_" in register names
+ - Registers / bits that are different between PCH generations are denoted by
+ "_PCH_[generation_name]_" in register/bit names.
+ - Registers / bits that are specific to PCH-H denoted by "_H_" in register/bit names.
+ Registers / bits that are specific to PCH-LP denoted by "_LP_" in register/bit names.
+ e.g., "_PCH_H_", "_PCH_LP_"
+ Registers / bits names without _H_ or _LP_ apply for both H and LP.
+ - Registers / bits that are different between SKUs are denoted by "_[SKU_name]"
+ at the end of the register/bit names
+ - Registers / bits of new devices introduced in a PCH generation will be just named
+ as "_PCH_" without [generation_name] inserted.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _PCH_REGS_PMC_H_
+#define _PCH_REGS_PMC_H_
+
+//
+// PMC Registers (D31:F2)
+//
+#define PCI_DEVICE_NUMBER_PCH_PMC 31
+#define PCI_FUNCTION_NUMBER_PCH_PMC 2
+
+#define R_PCH_PMC_PM_DATA_BAR 0x10
+#define B_PCH_PMC_PM_DATA_BAR 0xFFFFC000
+#define R_PCH_PMC_ACPI_BASE 0x40
+#define B_PCH_PMC_ACPI_BASE_BAR 0xFFFC
+#define R_PCH_PMC_ACPI_CNT 0x44
+#define B_PCH_PMC_ACPI_CNT_PWRM_EN BIT8 ///< PWRM enable
+#define B_PCH_PMC_ACPI_CNT_ACPI_EN BIT7 ///< ACPI eanble
+#define B_PCH_PMC_ACPI_CNT_SCIS (BIT2 | BIT1 | BIT0) ///< SCI IRQ select
+#define V_PCH_PMC_ACPI_CNT_SCIS_IRQ9 0
+#define V_PCH_PMC_ACPI_CNT_SCIS_IRQ10 1
+#define V_PCH_PMC_ACPI_CNT_SCIS_IRQ11 2
+#define V_PCH_PMC_ACPI_CNT_SCIS_IRQ20 4
+#define V_PCH_PMC_ACPI_CNT_SCIS_IRQ21 5
+#define V_PCH_PMC_ACPI_CNT_SCIS_IRQ22 6
+#define V_PCH_PMC_ACPI_CNT_SCIS_IRQ23 7
+#define R_PCH_PMC_PWRM_BASE 0x48
+#define B_PCH_PMC_PWRM_BASE_BAR 0xFFFF0000 ///< PWRM must be 64KB alignment to align the source decode.
+#define R_PCH_PMC_GEN_PMCON_A 0xA0
+#define B_PCH_PMC_GEN_PMCON_A_DC_PP_DIS BIT30
+#define B_PCH_PMC_GEN_PMCON_A_DSX_PP_DIS BIT29
+#define B_PCH_PMC_GEN_PMCON_A_AG3_PP_EN BIT28
+#define B_PCH_PMC_GEN_PMCON_A_SX_PP_EN BIT27
+#define B_PCH_PMC_GEN_PMCON_A_DISB BIT23
+#define B_PCH_PMC_GEN_PMCON_A_MEM_SR BIT21
+#define B_PCH_PMC_GEN_PMCON_A_MS4V BIT18
+#define B_PCH_PMC_GEN_PMCON_A_GBL_RST_STS BIT16
+#define B_PCH_PMC_GEN_PMCON_A_ALLOW_OPI_PLL_SD_INC0 BIT13
+#define B_PCH_PMC_GEN_PMCON_A_ALLOW_SPXB_CG_INC0 BIT12
+#define B_PCH_PMC_GEN_PMCON_A_BIOS_PCI_EXP_EN BIT10
+#define B_PCH_PMC_GEN_PMCON_A_PWRBTN_LVL BIT9
+#define B_PCH_PMC_GEN_PMCON_A_ALLOW_L1LOW_C0 BIT7
+#define B_PCH_PMC_GEN_PMCON_A_ALLOW_L1LOW_OPI_ON BIT6
+#define B_PCH_PMC_GEN_PMCON_A_ALLOW_L1LOW_BCLKREQ_ON BIT5
+#define B_PCH_PMC_GEN_PMCON_A_SMI_LOCK BIT4
+#define B_PCH_PMC_GEN_PMCON_A_ESPI_SMI_LOCK BIT3 ///< ESPI SMI lock
+#define B_PCH_PMC_GEN_PMCON_A_PER_SMI_SEL 0x0003
+#define V_PCH_PMC_GEN_PMCON_A_PER_SMI_64S 0x0000
+#define V_PCH_PMC_GEN_PMCON_A_PER_SMI_32S 0x0001
+#define V_PCH_PMC_GEN_PMCON_A_PER_SMI_16S 0x0002
+#define V_PCH_PMC_GEN_PMCON_A_PER_SMI_8S 0x0003
+#define R_PCH_PMC_GEN_PMCON_B 0xA4
+#define B_PCH_PMC_GEN_PMCON_B_SLPSX_STR_POL_LOCK BIT18 ///< Lock down SLP_S3/SLP_S4 Minimum Assertion width
+#define B_PCH_PMC_GEN_PMCON_B_ACPI_BASE_LOCK BIT17 ///< Lock ACPI BASE at 0x40, only cleared by reset when set
+#define B_PCH_PMC_GEN_PMCON_B_PM_DATA_BAR_DIS BIT16
+#define B_PCH_PMC_GEN_PMCON_B_PME_B0_S5_DIS BIT15
+#define B_PCH_PMC_GEN_PMCON_B_SUS_PWR_FLR BIT14
+#define B_PCH_PMC_GEN_PMCON_B_WOL_EN_OVRD BIT13
+#define B_PCH_PMC_GEN_PMCON_B_DISABLE_SX_STRETCH BIT12
+#define B_PCH_PMC_GEN_PMCON_B_SLP_S3_MAW 0xC00
+#define V_PCH_PMC_GEN_PMCON_B_SLP_S3_MAW_60US 0x000
+#define V_PCH_PMC_GEN_PMCON_B_SLP_S3_MAW_1MS 0x400
+#define V_PCH_PMC_GEN_PMCON_B_SLP_S3_MAW_50MS 0x800
+#define V_PCH_PMC_GEN_PMCON_B_SLP_S3_MAW_2S 0xC00
+#define B_PCH_PMC_GEN_PMCON_B_HOST_RST_STS BIT9
+#define B_PCH_PMC_GEN_PMCON_B_SWSMI_RTSL 0xC0
+#define V_PCH_PMC_GEN_PMCON_B_SWSMI_RTSL_64MS 0xC0
+#define V_PCH_PMC_GEN_PMCON_B_SWSMI_RTSL_32MS 0x80
+#define V_PCH_PMC_GEN_PMCON_B_SWSMI_RTSL_16MS 0x40
+#define V_PCH_PMC_GEN_PMCON_B_SWSMI_RTSL_1_5MS 0x00
+#define B_PCH_PMC_GEN_PMCON_B_SLP_S4_MAW 0x30
+#define V_PCH_PMC_GEN_PMCON_B_SLP_S4_MAW_1S 0x30
+#define V_PCH_PMC_GEN_PMCON_B_SLP_S4_MAW_2S 0x20
+#define V_PCH_PMC_GEN_PMCON_B_SLP_S4_MAW_3S 0x10
+#define V_PCH_PMC_GEN_PMCON_B_SLP_S4_MAW_4S 0x00
+#define B_PCH_PMC_GEN_PMCON_B_SLP_S4_ASE BIT3
+#define B_PCH_PMC_GEN_PMCON_B_RTC_PWR_STS BIT2
+#define B_PCH_PMC_GEN_PMCON_B_PWR_FLR BIT1
+#define B_PCH_PMC_GEN_PMCON_B_AFTERG3_EN BIT0
+#define R_PCH_PMC_BM_CX_CNF 0xA8
+#define B_PCH_PMC_BM_CX_CNF_STORAGE_BREAK_EN BIT31
+#define B_PCH_PMC_BM_CX_CNF_PCIE_BREAK_EN BIT30
+#define B_PCH_PMC_BM_CX_CNF_AZ_BREAK_EN BIT24
+#define B_PCH_PMC_BM_CX_CNF_DPSN_BREAK_EN BIT19
+#define B_PCH_PMC_BM_CX_CNF_XHCI_BREAK_EN BIT17
+#define B_PCH_PMC_BM_CX_CNF_SATA3_BREAK_EN BIT16
+#define B_PCH_PMC_BM_CX_CNF_SCRATCHPAD BIT15
+#define B_PCH_PMC_BM_CX_CNF_PHOLD_BM_STS_BLOCK BIT14
+#define B_PCH_PMC_BM_CX_CNF_MASK_CF BIT11
+#define B_PCH_PMC_BM_CX_CNF_BM_STS_ZERO_EN BIT10
+#define B_PCH_PMC_BM_CX_CNF_PM_SYNC_MSG_MODE BIT9
+#define R_PCH_PMC_ETR3 0xAC
+#define B_PCH_PMC_ETR3_CF9LOCK BIT31 ///< CF9h Lockdown
+#define B_PCH_PMC_ETR3_USB_CACHE_DIS BIT21
+#define B_PCH_PMC_ETR3_CF9GR BIT20 ///< CF9h Global Reset
+#define B_PCH_PMC_ETR3_SKIP_HOST_RST_HS BIT19
+#define B_PCH_PMC_ETR3_CWORWRE BIT18
+
+//
+// ACPI and legacy I/O register offsets from ACPIBASE
+//
+#define R_PCH_ACPI_PM1_STS 0x00
+#define S_PCH_ACPI_PM1_STS 2
+#define B_PCH_ACPI_PM1_STS_WAK BIT15
+#define B_PCH_ACPI_PM1_STS_PCIEXP_WAKE_STS BIT14
+#define B_PCH_ACPI_PM1_STS_PRBTNOR BIT11
+#define B_PCH_ACPI_PM1_STS_RTC BIT10
+#define B_PCH_ACPI_PM1_STS_PWRBTN BIT8
+#define B_PCH_ACPI_PM1_STS_GBL BIT5
+#define B_PCH_ACPI_PM1_STS_BM BIT4
+#define B_PCH_ACPI_PM1_STS_TMROF BIT0
+#define N_PCH_ACPI_PM1_STS_WAK 15
+#define N_PCH_ACPI_PM1_STS_PCIEXP_WAKE_STS 14
+#define N_PCH_ACPI_PM1_STS_PRBTNOR 11
+#define N_PCH_ACPI_PM1_STS_RTC 10
+#define N_PCH_ACPI_PM1_STS_PWRBTN 8
+#define N_PCH_ACPI_PM1_STS_GBL 5
+#define N_PCH_ACPI_PM1_STS_BM 4
+#define N_PCH_ACPI_PM1_STS_TMROF 0
+
+#define R_PCH_ACPI_PM1_EN 0x02
+#define S_PCH_ACPI_PM1_EN 2
+#define B_PCH_ACPI_PM1_EN_PCIEXP_WAKE_DIS BIT14
+#define B_PCH_ACPI_PM1_EN_RTC BIT10
+#define B_PCH_ACPI_PM1_EN_PWRBTN BIT8
+#define B_PCH_ACPI_PM1_EN_GBL BIT5
+#define B_PCH_ACPI_PM1_EN_TMROF BIT0
+#define N_PCH_ACPI_PM1_EN_PCIEXP_WAKE_DIS 14
+#define N_PCH_ACPI_PM1_EN_RTC 10
+#define N_PCH_ACPI_PM1_EN_PWRBTN 8
+#define N_PCH_ACPI_PM1_EN_GBL 5
+#define N_PCH_ACPI_PM1_EN_TMROF 0
+
+#define R_PCH_ACPI_PM1_CNT 0x04
+#define S_PCH_ACPI_PM1_CNT 4
+#define B_PCH_ACPI_PM1_CNT_SLP_EN BIT13
+#define B_PCH_ACPI_PM1_CNT_SLP_TYP (BIT12 | BIT11 | BIT10)
+#define V_PCH_ACPI_PM1_CNT_S0 0
+#define V_PCH_ACPI_PM1_CNT_S1 BIT10
+#define V_PCH_ACPI_PM1_CNT_S3 (BIT12 | BIT10)
+#define V_PCH_ACPI_PM1_CNT_S4 (BIT12 | BIT11)
+#define V_PCH_ACPI_PM1_CNT_S5 (BIT12 | BIT11 | BIT10)
+#define B_PCH_ACPI_PM1_CNT_GBL_RLS BIT2
+#define B_PCH_ACPI_PM1_CNT_BM_RLD BIT1
+#define B_PCH_ACPI_PM1_CNT_SCI_EN BIT0
+
+#define R_PCH_ACPI_PM1_TMR 0x08
+#define V_PCH_ACPI_TMR_FREQUENCY 3579545
+#define B_PCH_ACPI_PM1_TMR_VAL 0xFFFFFF
+#define V_PCH_ACPI_PM1_TMR_MAX_VAL 0x1000000 ///< The timer is 24 bit overflow
+
+#define R_PCH_SMI_EN 0x30
+#define S_PCH_SMI_EN 4
+#define B_PCH_SMI_EN_LEGACY_USB3 BIT31
+#define B_PCH_SMI_EN_GPIO_UNLOCK_SMI BIT27
+#define B_PCH_SMI_EN_LEGACY_USB2 BIT17
+#define B_PCH_SMI_EN_PERIODIC BIT14
+#define B_PCH_SMI_EN_TCO BIT13
+#define B_PCH_SMI_EN_MCSMI BIT11
+#define B_PCH_SMI_EN_BIOS_RLS BIT7
+#define B_PCH_SMI_EN_SWSMI_TMR BIT6
+#define B_PCH_SMI_EN_APMC BIT5
+#define B_PCH_SMI_EN_ON_SLP_EN BIT4
+#define B_PCH_SMI_EN_LEGACY_USB BIT3
+#define B_PCH_SMI_EN_BIOS BIT2
+#define B_PCH_SMI_EN_EOS BIT1
+#define B_PCH_SMI_EN_GBL_SMI BIT0
+#define N_PCH_SMI_EN_LEGACY_USB3 31
+#define N_PCH_SMI_EN_ESPI 28
+#define N_PCH_SMI_EN_GPIO_UNLOCK 27
+#define N_PCH_SMI_EN_INTEL_USB2 18
+#define N_PCH_SMI_EN_LEGACY_USB2 17
+#define N_PCH_SMI_EN_PERIODIC 14
+#define N_PCH_SMI_EN_TCO 13
+#define N_PCH_SMI_EN_MCSMI 11
+#define N_PCH_SMI_EN_BIOS_RLS 7
+#define N_PCH_SMI_EN_SWSMI_TMR 6
+#define N_PCH_SMI_EN_APMC 5
+#define N_PCH_SMI_EN_ON_SLP_EN 4
+#define N_PCH_SMI_EN_LEGACY_USB 3
+#define N_PCH_SMI_EN_BIOS 2
+#define N_PCH_SMI_EN_EOS 1
+#define N_PCH_SMI_EN_GBL_SMI 0
+
+#define R_PCH_SMI_STS 0x34
+#define S_PCH_SMI_STS 4
+#define B_PCH_SMI_STS_LEGACY_USB3 BIT31
+#define B_PCH_SMI_STS_GPIO_UNLOCK BIT27
+#define B_PCH_SMI_STS_SPI BIT26
+#define B_PCH_SMI_STS_MONITOR BIT21
+#define B_PCH_SMI_STS_PCI_EXP BIT20
+#define B_PCH_SMI_STS_PATCH BIT19
+#define B_PCH_SMI_STS_INTEL_USB2 BIT18
+#define B_PCH_SMI_STS_LEGACY_USB2 BIT17
+#define B_PCH_SMI_STS_SMBUS BIT16
+#define B_PCH_SMI_STS_SERIRQ BIT15
+#define B_PCH_SMI_STS_PERIODIC BIT14
+#define B_PCH_SMI_STS_TCO BIT13
+#define B_PCH_SMI_STS_DEVMON BIT12
+#define B_PCH_SMI_STS_MCSMI BIT11
+#define B_PCH_SMI_STS_GPIO_SMI BIT10
+#define B_PCH_SMI_STS_GPE0 BIT9
+#define B_PCH_SMI_STS_PM1_STS_REG BIT8
+#define B_PCH_SMI_STS_SWSMI_TMR BIT6
+#define B_PCH_SMI_STS_APM BIT5
+#define B_PCH_SMI_STS_ON_SLP_EN BIT4
+#define B_PCH_SMI_STS_LEGACY_USB BIT3
+#define B_PCH_SMI_STS_BIOS BIT2
+#define N_PCH_SMI_STS_LEGACY_USB3 31
+#define N_PCH_SMI_STS_ESPI 28
+#define N_PCH_SMI_STS_GPIO_UNLOCK 27
+#define N_PCH_SMI_STS_SPI 26
+#define N_PCH_SMI_STS_MONITOR 21
+#define N_PCH_SMI_STS_PCI_EXP 20
+#define N_PCH_SMI_STS_PATCH 19
+#define N_PCH_SMI_STS_INTEL_USB2 18
+#define N_PCH_SMI_STS_LEGACY_USB2 17
+#define N_PCH_SMI_STS_SMBUS 16
+#define N_PCH_SMI_STS_SERIRQ 15
+#define N_PCH_SMI_STS_PERIODIC 14
+#define N_PCH_SMI_STS_TCO 13
+#define N_PCH_SMI_STS_DEVMON 12
+#define N_PCH_SMI_STS_MCSMI 11
+#define N_PCH_SMI_STS_GPIO_SMI 10
+#define N_PCH_SMI_STS_GPE0 9
+#define N_PCH_SMI_STS_PM1_STS_REG 8
+#define N_PCH_SMI_STS_SWSMI_TMR 6
+#define N_PCH_SMI_STS_APM 5
+#define N_PCH_SMI_STS_ON_SLP_EN 4
+#define N_PCH_SMI_STS_LEGACY_USB 3
+#define N_PCH_SMI_STS_BIOS 2
+
+#define R_PCH_ACPI_GPE_CNTL 0x40
+#define B_PCH_ACPI_GPE_CNTL_SWGPE_CTRL BIT17
+
+#define R_PCH_DEVACT_STS 0x44
+#define S_PCH_DEVACT_STS 2
+#define B_PCH_DEVACT_STS_MASK 0x13E1
+#define B_PCH_DEVACT_STS_KBC BIT12
+#define B_PCH_DEVACT_STS_PIRQDH BIT9
+#define B_PCH_DEVACT_STS_PIRQCG BIT8
+#define B_PCH_DEVACT_STS_PIRQBF BIT7
+#define B_PCH_DEVACT_STS_PIRQAE BIT6
+#define B_PCH_DEVACT_STS_D0_TRP BIT0
+#define N_PCH_DEVACT_STS_KBC 12
+#define N_PCH_DEVACT_STS_PIRQDH 9
+#define N_PCH_DEVACT_STS_PIRQCG 8
+#define N_PCH_DEVACT_STS_PIRQBF 7
+#define N_PCH_DEVACT_STS_PIRQAE 6
+
+#define R_PCH_ACPI_PM2_CNT 0x50
+#define B_PCH_ACPI_PM2_CNT_ARB_DIS BIT0
+
+#define R_PCH_OC_WDT_CTL 0x54
+#define B_PCH_OC_WDT_CTL_RLD BIT31
+#define B_PCH_OC_WDT_CTL_ICCSURV_STS BIT25
+#define B_PCH_OC_WDT_CTL_NO_ICCSURV_STS BIT24
+#define B_PCH_OC_WDT_CTL_FORCE_ALL BIT15
+#define B_PCH_OC_WDT_CTL_EN BIT14
+#define B_PCH_OC_WDT_CTL_ICCSURV BIT13
+#define B_PCH_OC_WDT_CTL_LCK BIT12
+#define B_PCH_OC_WDT_CTL_TOV_MASK 0x3FF
+#define B_PCH_OC_WDT_CTL_FAILURE_STS BIT23
+#define B_PCH_OC_WDT_CTL_UNXP_RESET_STS BIT22
+#define B_PCH_OC_WDT_CTL_AFTER_POST 0x3F0000
+#define V_PCH_OC_WDT_CTL_STATUS_FAILURE 1
+#define V_PCH_OC_WDT_CTL_STATUS_OK 0
+
+#define R_PCH_ACPI_GPE0_STS_31_0 0x80
+#define R_PCH_ACPI_GPE0_STS_63_32 0x84
+#define R_PCH_ACPI_GPE0_STS_95_64 0x88
+#define R_PCH_ACPI_GPE0_STS_127_96 0x8C
+#define S_PCH_ACPI_GPE0_STS_127_96 4
+#define B_PCH_ACPI_GPE0_STS_127_96_WADT BIT18
+#define B_PCH_ACPI_GPE0_STS_127_96_LAN_WAKE BIT16
+#define B_PCH_ACPI_GPE0_STS_127_96_PME_B0 BIT13
+#define B_PCH_ACPI_GPE0_STS_127_96_ME_SCI BIT12
+#define B_PCH_ACPI_GPE0_STS_127_96_PME BIT11
+#define B_PCH_ACPI_GPE0_STS_127_96_BATLOW BIT10
+#define B_PCH_ACPI_GPE0_STS_127_96_PCI_EXP BIT9
+#define B_PCH_ACPI_GPE0_STS_127_96_RI BIT8
+#define B_PCH_ACPI_GPE0_STS_127_96_SMB_WAK BIT7
+#define B_PCH_ACPI_GPE0_STS_127_96_TC0SCI BIT6
+#define B_PCH_ACPI_GPE0_STS_127_96_SWGPE BIT2
+#define B_PCH_ACPI_GPE0_STS_127_96_HOT_PLUG BIT1
+#define N_PCH_ACPI_GPE0_STS_127_96_PME_B0 13
+#define N_PCH_ACPI_GPE0_STS_127_96_PME 11
+#define N_PCH_ACPI_GPE0_STS_127_96_BATLOW 10
+#define N_PCH_ACPI_GPE0_STS_127_96_PCI_EXP 9
+#define N_PCH_ACPI_GPE0_STS_127_96_RI 8
+#define N_PCH_ACPI_GPE0_STS_127_96_SMB_WAK 7
+#define N_PCH_ACPI_GPE0_STS_127_96_TC0SCI 6
+#define N_PCH_ACPI_GPE0_STS_127_96_SWGPE 2
+#define N_PCH_ACPI_GPE0_STS_127_96_HOT_PLUG 1
+
+#define R_PCH_ACPI_GPE0_EN_31_0 0x90
+#define R_PCH_ACPI_GPE0_EN_63_32 0x94
+#define R_PCH_ACPI_GPE0_EN_95_64 0x98
+#define R_PCH_ACPI_GPE0_EN_127_96 0x9C
+#define S_PCH_ACPI_GPE0_EN_127_96 4
+#define B_PCH_ACPI_GPE0_EN_127_96_WADT BIT18
+#define B_PCH_ACPI_GPE0_EN_127_96_LAN_WAKE BIT16
+#define B_PCH_ACPI_GPE0_EN_127_96_PME_B0 BIT13
+#define B_PCH_ACPI_GPE0_EN_127_96_ME_SCI BIT12
+#define B_PCH_ACPI_GPE0_EN_127_96_PME BIT11
+#define B_PCH_ACPI_GPE0_EN_127_96_BATLOW BIT10
+#define B_PCH_ACPI_GPE0_EN_127_96_PCI_EXP BIT9
+#define B_PCH_ACPI_GPE0_EN_127_96_RI BIT8
+#define B_PCH_ACPI_GPE0_EN_127_96_TC0SCI BIT6
+#define B_PCH_ACPI_GPE0_EN_127_96_SWGPE BIT2
+#define B_PCH_ACPI_GPE0_EN_127_96_HOT_PLUG BIT1
+#define N_PCH_ACPI_GPE0_EN_127_96_PME_B0 13
+#define N_PCH_ACPI_GPE0_EN_127_96_USB3 12
+#define N_PCH_ACPI_GPE0_EN_127_96_PME 11
+#define N_PCH_ACPI_GPE0_EN_127_96_BATLOW 10
+#define N_PCH_ACPI_GPE0_EN_127_96_PCI_EXP 9
+#define N_PCH_ACPI_GPE0_EN_127_96_RI 8
+#define N_PCH_ACPI_GPE0_EN_127_96_TC0SCI 6
+#define N_PCH_ACPI_GPE0_EN_127_96_SWGPE 2
+#define N_PCH_ACPI_GPE0_EN_127_96_HOT_PLUG 1
+
+
+//
+// TCO register I/O map
+//
+#define R_PCH_TCO_RLD 0x0
+#define R_PCH_TCO_DAT_IN 0x2
+#define R_PCH_TCO_DAT_OUT 0x3
+#define R_PCH_TCO1_STS 0x04
+#define S_PCH_TCO1_STS 2
+#define B_PCH_TCO1_STS_DMISERR BIT12
+#define B_PCH_TCO1_STS_DMISMI BIT10
+#define B_PCH_TCO1_STS_DMISCI BIT9
+#define B_PCH_TCO1_STS_BIOSWR BIT8
+#define B_PCH_TCO1_STS_NEWCENTURY BIT7
+#define B_PCH_TCO1_STS_TIMEOUT BIT3
+#define B_PCH_TCO1_STS_TCO_INT BIT2
+#define B_PCH_TCO1_STS_SW_TCO_SMI BIT1
+#define B_PCH_TCO1_STS_NMI2SMI BIT0
+#define N_PCH_TCO1_STS_DMISMI 10
+#define N_PCH_TCO1_STS_BIOSWR 8
+#define N_PCH_TCO1_STS_NEWCENTURY 7
+#define N_PCH_TCO1_STS_TIMEOUT 3
+#define N_PCH_TCO1_STS_SW_TCO_SMI 1
+#define N_PCH_TCO1_STS_NMI2SMI 0
+
+#define R_PCH_TCO2_STS 0x06
+#define S_PCH_TCO2_STS 2
+#define B_PCH_TCO2_STS_SMLINK_SLV_SMI BIT4
+#define B_PCH_TCO2_STS_BAD_BIOS BIT3
+#define B_PCH_TCO2_STS_BOOT BIT2
+#define B_PCH_TCO2_STS_SECOND_TO BIT1
+#define B_PCH_TCO2_STS_INTRD_DET BIT0
+#define N_PCH_TCO2_STS_INTRD_DET 0
+
+#define R_PCH_TCO1_CNT 0x08
+#define S_PCH_TCO1_CNT 2
+#define B_PCH_TCO_CNT_LOCK BIT12
+#define B_PCH_TCO_CNT_TMR_HLT BIT11
+#define B_PCH_TCO_CNT_NMI2SMI_EN BIT9
+#define B_PCH_TCO_CNT_NMI_NOW BIT8
+#define N_PCH_TCO_CNT_NMI2SMI_EN 9
+
+#define R_PCH_TCO2_CNT 0x0A
+#define S_PCH_TCO2_CNT 2
+#define B_PCH_TCO2_CNT_OS_POLICY 0x0030
+#define B_PCH_TCO2_CNT_GPI11_ALERT_DISABLE 0x0008
+#define B_PCH_TCO2_CNT_INTRD_SEL 0x0006
+#define N_PCH_TCO2_CNT_INTRD_SEL 2
+
+#define R_PCH_TCO_MESSAGE1 0x0C
+#define R_PCH_TCO_MESSAGE2 0x0D
+#define R_PCH_TCO_WDCNT 0x0E
+#define R_PCH_TCO_SW_IRQ_GEN 0x10
+#define B_PCH_TCO_IRQ12_CAUSE BIT1
+#define B_PCH_TCO_IRQ1_CAUSE BIT0
+#define R_PCH_TCO_TMR 0x12
+
+//
+// PWRM Registers
+//
+#define R_PCH_WADT_AC 0x0 ///< Wake Alarm Device Timer: AC
+#define R_PCH_WADT_DC 0x4 ///< Wake Alarm Device Timer: DC
+#define R_PCH_WADT_EXP_AC 0x8 ///< Wake Alarm Device Expired Timer: AC
+#define R_PCH_WADT_EXP_DC 0xC ///< Wake Alarm Device Expired Timer: DC
+#define R_PCH_PWRM_PRSTS 0x10 ///< Power and Reset Status
+#define B_PCH_PWRM_PRSTS_VE_WD_TMR_STS BIT7 ///< VE Watchdog Timer Status
+#define B_PCH_PWRM_PRSTS_WOL_OVR_WK_STS BIT5
+#define B_PCH_PWRM_PRSTS_FIELD_1 BIT4
+#define B_PCH_PWRM_PRSTS_ME_WAKE_STS BIT0
+#define R_PCH_PWRM_14 0x14
+#define R_PCH_PWRM_CFG 0x18 ///< Power Management Configuration
+#define B_PCH_PWRM_CFG_ALLOW_24_OSC_SD BIT29 ///< Allow 24MHz Crystal Oscillator Shutdown
+#define B_PCH_PWRM_CFG_ALLOW_USB2_CORE_PG BIT25 ///< Allow USB2 Core Power Gating
+#define B_PCH_PWRM_CFG_RTC_DS_WAKE_DIS BIT21 ///< RTC Wake from Deep S4/S5 Disable
+#define B_PCH_PWRM_CFG_SSMAW_MASK (BIT19 | BIT18) ///< SLP_SUS# Min Assertion Width
+#define V_PCH_PWRM_CFG_SSMAW_4S (BIT19 | BIT18) ///< 4 seconds
+#define V_PCH_PWRM_CFG_SSMAW_1S BIT19 ///< 1 second
+#define V_PCH_PWRM_CFG_SSMAW_0_5S BIT18 ///< 0.5 second (500ms)
+#define V_PCH_PWRM_CFG_SSMAW_0S 0 ///< 0 second
+#define B_PCH_PWRM_CFG_SAMAW_MASK (BIT17 | BIT16) ///< SLP_A# Min Assertion Width
+#define V_PCH_PWRM_CFG_SAMAW_2S (BIT17 | BIT16) ///< 2 seconds
+#define V_PCH_PWRM_CFG_SAMAW_98ms BIT17 ///< 98ms
+#define V_PCH_PWRM_CFG_SAMAW_4S BIT16 ///< 4 seconds
+#define V_PCH_PWRM_CFG_SAMAW_0S 0 ///< 0 second
+#define B_PCH_PWRM_CFG_RPCD_MASK (BIT9 | BIT8) ///< Reset Power Cycle Duration
+#define V_PCH_PWRM_CFG_RPCD_1S (BIT9 | BIT8) ///< 1-2 seconds
+#define V_PCH_PWRM_CFG_RPCD_2S BIT9 ///< 2-3 seconds
+#define V_PCH_PWRM_CFG_RPCD_3S BIT8 ///< 3-4 seconds
+#define V_PCH_PWRM_CFG_RPCD_4S 0 ///< 4-5 seconds (Default)
+#define R_PCH_PWRM_PCH_PM_STS 0x1C ///< Contains misc. fields used to record PCH power management events
+#define B_PCH_PWRM_PCH_PM_STS_PMC_MSG_FULL_STS BIT24 ///< MTPMC transport mechanism full indication
+#define R_PCH_PWRM_MTPMC 0x20 ///< Message to PMC
+#define V_PCH_PWRM_MTPMC_COMMAND_PG_LANE_0_15 0xE ///< Command to override lanes 0-15 power gating
+#define V_PCH_PWRM_MTPMC_COMMAND_PG_LANE_16_31 0xF ///< Command to override lanes 16-31 power gating
+#define B_PCH_PWRM_MTPMC_PG_CMD_DATA 0xFFFF0000 ///< Data part of PowerGate Message to PMC
+#define N_PCH_PWRM_MTPMC_PG_CMD_DATA 16
+#define R_PCH_PWRM_PCH_PM_STS2 0x24 ///< PCH Power Management Status
+#define R_PCH_PWRM_S3_PWRGATE_POL 0x28 ///< S3 Power Gating Policies
+#define B_PCH_PWRM_S3DC_GATE_SUS BIT1 ///< Deep S3 Enable in DC Mode
+#define B_PCH_PWRM_S3AC_GATE_SUS BIT0 ///< Deep S3 Enable in AC Mode
+#define R_PCH_PWRM_S4_PWRGATE_POL 0x2C ///< Deep S4 Power Policies
+#define B_PCH_PWRM_S4DC_GATE_SUS BIT1 ///< Deep S4 Enable in DC Mode
+#define B_PCH_PWRM_S4AC_GATE_SUS BIT0 ///< Deep S4 Enable in AC Mode
+#define R_PCH_PWRM_S5_PWRGATE_POL 0x30 ///< Deep S5 Power Policies
+#define B_PCH_PWRM_S5DC_GATE_SUS BIT15 ///< Deep S5 Enable in DC Mode
+#define B_PCH_PWRM_S5AC_GATE_SUS BIT14 ///< Deep S5 Enable in AC Mode
+#define R_PCH_PWRM_DSX_CFG 0x34 ///< Deep SX Configuration
+#define B_PCH_PWRM_DSX_CFG_WAKE_PIN_DSX_EN BIT2 ///< WAKE# Pin DeepSx Enable
+#define B_PCH_PWRM_DSX_CFG_ACPRES_PD_DSX_DIS BIT1 ///< AC_PRESENT pin pulldown in DeepSx disable
+#define B_PCH_PWRM_DSX_CFG_LAN_WAKE_EN BIT0 ///< LAN_WAKE Pin DeepSx Enable
+#define R_PCH_PWRM_CFG2 0x3C ///< Power Management Configuration Reg 2
+#define B_PCH_PWRM_CFG2_PBOP (BIT31 | BIT30 | BIT29) ///< Power Button Override Period (PBOP)
+#define N_PCH_PWRM_CFG2_PBOP 29 ///< Power Button Override Period (PBOP)
+#define B_PCH_PWRM_CFG2_PB_DIS BIT28 ///< Power Button Native Mode Disable (PB_DIS)
+#define B_PCH_PWRM_CFG2_DRAM_RESET_CTL BIT26 ///< DRAM RESET# control
+#define R_PCH_PWRM_EN_SN_SLOW_RING 0x48 ///< Enable Snoop Request to SLOW_RING
+#define R_PCH_PWRM_EN_SN_SLOW_RING2 0x4C ///< Enable Snoop Request to SLOW_RING 2nd Reg
+#define R_PCH_PWRM_EN_SN_SA 0x50 ///< Enable Snoop Request to SA
+#define R_PCH_PWRM_EN_SN_SA2 0x54 ///< Enable Snoop Request to SA 2nd Reg
+#define R_PCH_PWRM_EN_SN_SLOW_RING_CF 0x58 ///< Enable Snoop Request to SLOW_RING_CF
+#define R_PCH_PWRM_EN_NS_SA 0x68 ///< Enable Non-Snoop Request to SA
+#define R_PCH_PWRM_EN_CW_SLOW_RING 0x80 ///< Enable Clock Wake to SLOW_RING
+#define R_PCH_PWRM_EN_CW_SLOW_RING2 0x84 ///< Enable Clock Wake to SLOW_RING 2nd Reg
+#define R_PCH_PWRM_EN_CW_SA 0x88 ///< Enable Clock Wake to SA
+#define R_PCH_PWRM_EN_CW_SA2 0x8C ///< Enable Clock Wake to SA 2nd Reg
+#define R_PCH_PWRM_EN_CW_SLOW_RING_CF 0x98 ///< Enable Clock Wake to SLOW_RING_CF
+#define R_PCH_PWRM_EN_PA_SLOW_RING 0xA8 ///< Enable Pegged Active to SLOW_RING
+#define R_PCH_PWRM_EN_PA_SLOW_RING2 0xAC ///< Enable Pegged Active to SLOW_RING 2nd Reg
+#define R_PCH_PWRM_EN_PA_SA 0xB0 ///< Enable Pegged Active to SA
+#define R_PCH_PWRM_EN_PA_SA2 0xB4 ///< Enable Pegged Active to SA 2nd Reg
+#define R_PCH_PWRM_EN_MISC_EVENT 0xC0 ///< Enable Misc PM_SYNC Events
+#define R_PCH_PWRM_PMSYNC_TPR_CONFIG 0xC4
+#define B_PCH_PWRM_PMSYNC_TPR_CONFIG_LOCK BIT31
+#define B_PCH_PWRM_PMSYNC_PCH2CPU_TT_EN BIT26
+#define B_PCH_PWRM_PMSYNC_PCH2CPU_TT_STATE (BIT25 | BIT24)
+#define N_PCH_PWRM_PMSYNC_PCH2CPU_TT_STATE 24
+#define V_PCH_PWRM_PMSYNC_PCH2CPU_TT_STATE_1 1
+#define R_PCH_PWRM_PMSYNC_MISC_CFG 0xC8
+#define B_PCH_PWRM_PMSYNC_PM_SYNC_LOCK BIT15 ///< PM_SYNC Configuration Lock
+#define B_PCH_PWRM_PMSYNC_GPIO_D_SEL BIT11
+#define B_PCH_PWRM_PMSYNC_GPIO_C_SEL BIT10
+#define R_PCH_PWRM_PM_SYNC_STATE_HYS 0xD0 ///< PM_SYNC State Hysteresis
+#define R_PCH_PWRM_PM_SYNC_MODE 0xD4 ///< PM_SYNC Pin Mode
+#define R_PCH_PWRM_CFG3 0xE0 ///< Power Management Configuration Reg 3
+#define B_PCH_PWRM_CFG3_DSX_WLAN_PP_EN BIT16 ///< Deep-Sx WLAN Phy Power Enable
+#define B_PCH_PWRM_CFG3_HOST_WLAN_PP_EN BIT17 ///< Host Wireless LAN Phy Power Enable
+#define B_PCH_PWRM_CFG3_PWRG_LOCK BIT2 ///< Lock power gating override messages
+#define R_PCH_PWRM_PM_DOWN_PPB_CFG 0xE4 ///< PM_DOWN PCH_POWER_BUDGET CONFIGURATION
+#define R_PCH_PWRM_CFG4 0xE8 ///< Power Management Configuration Reg 4
+#define B_PCH_PWRM_CFG4_U2_PHY_PG_EN BIT30 ///< USB2 PHY SUS Well Power Gating Enable
+#define B_PCH_PWRM_CFG4_CPU_IOVR_RAMP_DUR (0x000001FF) ///< CPU I/O VR Ramp Duration, [8:0]
+#define N_PCH_PWRM_CFG4_CPU_IOVR_RAMP_DUR 0
+#define V_PCH_PWRM_CFG4_CPU_IOVR_RAMP_DUR_70US 0x007
+#define V_PCH_PWRM_CFG4_CPU_IOVR_RAMP_DUR_240US 0x018
+#define R_PCH_PWRM_CPU_EPOC 0xEC
+#define R_PCH_PWRM_VR_MISC_CTL 0x100
+#define B_PCH_PWRM_VR_MISC_CTL_VIDSOVEN BIT3
+#define R_PCH_PWRM_GPIO_CFG 0x120
+#define B_PCH_PWRM_GPIO_CFG_GPE0_DW2 (BIT11 | BIT10 | BIT9 | BIT8)
+#define N_PCH_PWRM_GPIO_CFG_GPE0_DW2 8
+#define B_PCH_PWRM_GPIO_CFG_GPE0_DW1 (BIT7 | BIT6 | BIT5 | BIT4)
+#define N_PCH_PWRM_GPIO_CFG_GPE0_DW1 4
+#define B_PCH_PWRM_GPIO_CFG_GPE0_DW0 (BIT3 | BIT2 | BIT1 | BIT0)
+#define N_PCH_PWRM_GPIO_CFG_GPE0_DW0 0
+#define R_PCH_PWRM_PM_SYNC_MODE_C0 0xF4 ///< PM_SYNC Pin Mode in C0
+#define R_PCH_PWRM_ACPI_TMR_CTL 0xFC
+#define B_PCH_PWRM_ACPI_TMR_DIS BIT1
+#define R_PCH_PWRM_124 0x124
+#define R_PCH_PWRM_SLP_S0_RESIDENCY_COUNTER 0x13C
+#define R_PCH_PWRM_MODPHY_PM_CFG1 0x200
+#define R_PCH_PWRM_MODPHY_PM_CFG1_MLSXSWPGP 0xFFFF
+#define R_PCH_PWRM_MODPHY_PM_CFG2 0x204 ///< ModPHY Power Management Configuration Reg 2
+#define B_PCH_PWRM_MODPHY_PM_CFG2_MLSPDDGE BIT30 ///< ModPHY Lane SUS Power Domain Dynamic Gating Enable
+#define B_PCH_PWRM_MODPHY_PM_CFG2_EMFC BIT29 ///< Enable ModPHY FET Control
+#define B_PCH_PWRM_MODPHY_PM_CFG2_EFRT (BIT28 | BIT27 | BIT26 | BIT25 | BIT24) ///< External FET Ramp Time
+#define N_PCH_PWRM_MODPHY_PM_CFG2_EFRT 24
+#define V_PCH_PWRM_MODPHY_PM_CFG2_EFRT_200US 0x0A
+#define B_PCH_PWRM_MODPHY_PM_CFG2_ASLOR_UFS BIT16 ///< UFS ModPHY SPD SPD Override
+#define R_PCH_PWRM_MODPHY_PM_CFG3 0x208 ///< ModPHY Power Management Configuration Reg 3
+#define B_PCH_PWRM_MODPHY_PM_CFG3_MSPDRTREQ_UFS BIT16 ///< UFS ModPHY SPD RT Request
+#define B_PCH_PWRM_MODPHY_PM_CFG3_MSPDRTREQ_XDCI BIT15 ///< xDCI ModPHY SPD RT Request
+#define B_PCH_PWRM_MODPHY_PM_CFG3_MSPDRTREQ_XHCI BIT14 ///< xHCI ModPHY SPD RT Request
+#define B_PCH_PWRM_MODPHY_PM_CFG3_MSPDRTREQ_GBE BIT13 ///< GbE ModPHY SPD RT Request
+#define B_PCH_PWRM_MODPHY_PM_CFG3_MSPDRTREQ_SATA BIT12 ///< SATA ModPHY SPD RT Request
+#define R_PCH_PWRM_30C 0x30C
+#define R_PCH_PWRM_OBFF_CFG 0x314 ///< OBFF Configuration
+#define R_PCH_PWRM_31C 0x31C
+#define R_PCH_PWRM_CPPM_MISC_CFG 0x320 ///< CPPM Miscellaneous Configuration
+#define R_PCH_PWRM_CPPM_CG_POL1A 0x324 ///< CPPM Clock Gating Policy Reg 1
+#define R_PCH_PWRM_CPPM_CG_POL2A 0x340 ///< CPPM Clock Gating Policy Reg 3
+#define R_PCH_PWRM_34C 0x34C
+#define R_PCH_PWRM_CPPM_CG_POL3A 0x3A8 ///< CPPM Clock Gating Policy Reg 5
+#define B_PCH_PWRM_CPPM_CG_POLXA_CPPM_GX_QUAL BIT30 ///< CPPM Shutdown Qualifier Enable for Clock Source Group X
+#define B_PCH_PWRM_CPPM_CG_POLXA_LTR_GX_THRESH (0x000001FF) ///< LTR Threshold for Clock Source Group X, [8:0]
+#define R_PCH_PWRM_3D0 0x3D0
+#define R_PCH_PWRM_CPPM_MPG_POL1A 0x3E0 ///< CPPM ModPHY Gating Policy Reg 1A
+#define B_PCH_PWRM_CPPM_MPG_POL1A_CPPM_MODPHY_QUAL BIT30 ///< CPPM Shutdown Qualifier Enable for ModPHY
+#define B_PCH_PWRM_CPPM_MPG_POL1A_LT_MODPHY_SEL BIT29 ///< ASLT/PLT Selection for ModPHY
+#define B_PCH_PWRM_CPPM_MPG_POL1A_LTR_MODPHY_THRESH (0x000001FF) ///< LTR Threshold for ModPHY, [8:0]
+#define R_PCH_PWRM_CS_SD_CTL1 0x3E8 ///< Clock Source Shutdown Control Reg 1
+#define B_PCH_PWRM_CS_SD_CTL1_CS5_CTL_CFG (BIT22 | BIT21 | BIT20) ///< Clock Source 5 Control Configuration
+#define N_PCH_PWRM_CS_SD_CTL1_CS5_CTL_CFG 20
+#define B_PCH_PWRM_CS_SD_CTL1_CS1_CTL_CFG (BIT2 | BIT1 | BIT0) ///< Clock Source 1 Control Configuration
+#define N_PCH_PWRM_CS_SD_CTL1_CS1_CTL_CFG 0
+#define R_PCH_PWRM_CS_SD_CTL2 0x3EC ///< Clock Source Shutdown Control Reg 2
+#define R_PCH_PWRM_HSWPGCR1 0x5D0
+#define B_PCH_PWRM_SW_PG_CTRL_LOCK BIT31
+#define B_PCH_PWRM_DFX_SW_PG_CTRL BIT0
+#define R_PCH_PWRM_600 0x600
+#define R_PCH_PWRM_604 0x604
+#define R_PCH_PWRM_ST_PG_FDIS_PMC_1 0x620 ///< Static PG Related Function Disable Register 1
+#define B_PCH_PWRM_ST_PG_FDIS_PMC_1_ST_FDIS_LK BIT31 ///< Static Function Disable Lock (ST_FDIS_LK)
+#define B_PCH_PWRM_ST_PG_FDIS_PMC_1_CAM_FDIS_PMC BIT6 ///< Camera Function Disable (PMC Version) (CAM_FDIS_PMC)
+#define B_PCH_PWRM_ST_PG_FDIS_PMC_1_ISH_FDIS_PMC BIT5 ///< SH Function Disable (PMC Version) (ISH_FDIS_PMC)
+#define B_PCH_PWRM_ST_PG_FDIS_PMC_1_GBE_FDIS_PMC BIT0 ///< GBE Function Disable (PMC Version) (GBE_FDIS_PMC)
+#define R_PCH_PWRM_ST_PG_FDIS_PMC_2 0x624 ///< Static Function Disable Control Register 2
+#define V_PCH_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_FDIS_PMC 0x7FF ///< Static Function Disable Control Register 2
+#define B_PCH_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_GSPI1_FDIS_PMC BIT10 ///< SerialIo Controller GSPI Device 1 Function Disable
+#define B_PCH_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_GSPI0_FDIS_PMC BIT9 ///< SerialIo Controller GSPI Device 0 Function Disable
+#define B_PCH_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_UART2_FDIS_PMC BIT8 ///< SerialIo Controller UART Device 2 Function Disable
+#define B_PCH_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_UART1_FDIS_PMC BIT7 ///< SerialIo Controller UART Device 1 Function Disable
+#define B_PCH_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_UART0_FDIS_PMC BIT6 ///< SerialIo Controller UART Device 0 Function Disable
+#define B_PCH_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_I2C5_FDIS_PMC BIT5 ///< SerialIo Controller I2C Device 5 Function Disable
+#define B_PCH_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_I2C4_FDIS_PMC BIT4 ///< SerialIo Controller I2C Device 4 Function Disable
+#define B_PCH_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_I2C3_FDIS_PMC BIT3 ///< SerialIo Controller I2C Device 3 Function Disable
+#define B_PCH_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_I2C2_FDIS_PMC BIT2 ///< SerialIo Controller I2C Device 2 Function Disable
+#define B_PCH_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_I2C1_FDIS_PMC BIT1 ///< SerialIo Controller I2C Device 1 Function Disable
+#define B_PCH_PWRM_ST_PG_FDIS_PMC_2_SERIALIO_I2C0_FDIS_PMC BIT0 ///< SerialIo Controller I2C Device 0 Function Disable
+#define R_PCH_PWRM_NST_PG_FDIS_1 0x628
+#define B_PCH_PWRM_NST_PG_FDIS_1_SCC_FDIS_PMC BIT25 ///< SCC Function Disable. This is only avaiable in B0 onward.
+#define B_PCH_PWRM_NST_PG_FDIS_1_XDCI_FDIS_PMC BIT24 ///< XDCI Function Disable. This is only avaiable in B0 onward.
+#define B_PCH_PWRM_NST_PG_FDIS_1_ADSP_FDIS_PMC BIT23 ///< ADSP Function Disable
+#define B_PCH_PWRM_NST_PG_FDIS_1_SATA_FDIS_PMC BIT22 ///< SATA Function Disable
+#define B_PCH_PWRM_NST_PG_FDIS_1_PCIE_C3_FDIS_PMC BIT13 ///< PCIe Controller C Port 3 Function Disable
+#define B_PCH_PWRM_NST_PG_FDIS_1_PCIE_C2_FDIS_PMC BIT12 ///< PCIe Controller C Port 2 Function Disable
+#define B_PCH_PWRM_NST_PG_FDIS_1_PCIE_C1_FDIS_PMC BIT11 ///< PCIe Controller C Port 1 Function Disable
+#define B_PCH_PWRM_NST_PG_FDIS_1_PCIE_C0_FDIS_PMC BIT10 ///< PCIe Controller C Port 0 Function Disable
+#define B_PCH_PWRM_NST_PG_FDIS_1_PCIE_B3_FDIS_PMC BIT9 ///< PCIe Controller B Port 3 Function Disable
+#define B_PCH_PWRM_NST_PG_FDIS_1_PCIE_B2_FDIS_PMC BIT8 ///< PCIe Controller B Port 2 Function Disable
+#define B_PCH_PWRM_NST_PG_FDIS_1_PCIE_B1_FDIS_PMC BIT7 ///< PCIe Controller B Port 1 Function Disable
+#define B_PCH_PWRM_NST_PG_FDIS_1_PCIE_B0_FDIS_PMC BIT6 ///< PCIe Controller B Port 0 Function Disable
+#define B_PCH_PWRM_NST_PG_FDIS_1_PCIE_A3_FDIS_PMC BIT5 ///< PCIe Controller A Port 3 Function Disable
+#define B_PCH_PWRM_NST_PG_FDIS_1_PCIE_A2_FDIS_PMC BIT4 ///< PCIe Controller A Port 2 Function Disable
+#define B_PCH_PWRM_NST_PG_FDIS_1_PCIE_A1_FDIS_PMC BIT3 ///< PCIe Controller A Port 1 Function Disable
+#define B_PCH_PWRM_NST_PG_FDIS_1_PCIE_A0_FDIS_PMC BIT2 ///< PCIe Controller A Port 0 Function Disable
+#define B_PCH_PWRM_NST_PG_FDIS_1_XHCI_FDIS_PMC BIT0 ///< XHCI Function Disable
+#define R_PCH_PWRM_FUSE_DIS_RD_1 0x640 ///< Fuse Disable Read 1 Register
+#define B_PCH_PWRM_FUSE_DIS_RD_1_PCIE_E3_FUSE_DIS BIT21 ///< PCIe Controller E Port 3 Fuse Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_1_PCIE_E2_FUSE_DIS BIT20 ///< PCIe Controller E Port 2 Fuse Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_1_PCIE_E1_FUSE_DIS BIT19 ///< PCIe Controller E Port 1 Fuse Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_1_PCIE_E0_FUSE_DIS BIT18 ///< PCIe Controller E Port 0 Fuse Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_1_PCIE_D3_FUSE_DIS BIT17 ///< PCIe Controller D Port 3 Fuse Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_1_PCIE_D2_FUSE_DIS BIT16 ///< PCIe Controller D Port 2 Fuse Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_1_PCIE_D1_FUSE_DIS BIT15 ///< PCIe Controller D Port 1 Fuse Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_1_PCIE_D0_FUSE_DIS BIT14 ///< PCIe Controller D Port 0 Fuse Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_1_PCIE_C3_FUSE_DIS BIT13 ///< PCIe Controller C Port 3 Fuse Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_1_PCIE_C2_FUSE_DIS BIT12 ///< PCIe Controller C Port 2 Fuse Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_1_PCIE_C1_FUSE_DIS BIT11 ///< PCIe Controller C Port 1 Fuse Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_1_PCIE_C0_FUSE_DIS BIT10 ///< PCIe Controller C Port 0 Fuse Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_1_PCIE_B3_FUSE_DIS BIT9 ///< PCIe Controller B Port 3 Fuse Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_1_PCIE_B2_FUSE_DIS BIT8 ///< PCIe Controller B Port 2 Fuse Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_1_PCIE_B1_FUSE_DIS BIT7 ///< PCIe Controller B Port 1 Fuse Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_1_PCIE_B0_FUSE_DIS BIT6 ///< PCIe Controller B Port 0 Fuse Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_1_PCIE_A3_FUSE_DIS BIT5 ///< PCIe Controller A Port 3 Fuse Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_1_PCIE_A2_FUSE_DIS BIT4 ///< PCIe Controller A Port 2 Fuse Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_1_PCIE_A1_FUSE_DIS BIT3 ///< PCIe Controller A Port 1 Fuse Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_1_PCIE_A0_FUSE_DIS BIT2 ///< PCIe Controller A Port 0 Fuse Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_1_XHCI_FUSE_DIS BIT0 ///< XHCI Fuse Disable
+#define R_PCH_PWRM_FUSE_DIS_RD_2 0x644 ///< Fuse Disable Read 2 Register
+#define B_PCH_PWRM_FUSE_DIS_RD_2_SPC_SS_DIS BIT25 ///< SPC Fuse Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_2_SPB_SS_DIS BIT24 ///< SPB Fuse Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_2_SPA_SS_DIS BIT23 ///< SPA Fuse Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_2_PSTH_FUSE_SS_DIS BIT21 ///< PSTH Fuse or Soft Strap Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_2_DMI_FUSE_SS_DIS BIT20 ///< DMI Fuse or Soft Strap Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_2_OTG_FUSE_SS_DIS BIT19 ///< OTG Fuse or Soft Strap Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_2_XHCI_SS_DIS BIT18 ///< XHCI Soft Strap Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_2_FIA_FUSE_SS_DIS BIT17 ///< FIA Fuse or Soft Strap Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_2_DSP_FUSE_SS_DIS BIT16 ///< DSP Fuse or Soft Strap Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_2_SATA_FUSE_SS_DIS BIT15 ///< SATA Fuse or Soft Strap Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_2_ICC_FUSE_SS_DIS BIT14 ///< ICC Fuse or Soft Strap Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_2_LPC_FUSE_SS_DIS BIT13 ///< LPC Fuse or Soft Strap Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_2_RTC_FUSE_SS_DIS BIT12 ///< RTC Fuse or Soft Strap Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_2_P2S_FUSE_SS_DIS BIT11 ///< P2S Fuse or Soft Strap Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_2_TRSB_FUSE_SS_DIS BIT10 ///< TRSB Fuse or Soft Strap Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_2_SMB_FUSE_SS_DIS BIT9 ///< SMB Fuse or Soft Strap Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_2_ITSS_FUSE_SS_DIS BIT8 ///< ITSS Fuse or Soft Strap Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_2_SERIALIO_FUSE_SS_DIS BIT6 ///< SerialIo Fuse or Soft Strap Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_2_SCC_FUSE_SS_DIS BIT4 ///< SCC Fuse or Soft Strap Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_2_P2D_FUSE_SS_DIS BIT3 ///< P2D Fuse or Soft Strap Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_2_CAM_FUSE_SS_DIS BIT2 ///< Camera Fuse or Soft Strap Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_2_ISH_FUSE_SS_DIS BIT1 ///< ISH Fuse or Soft Strap Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_2_GBE_FUSE_SS_DIS BIT0 ///< GBE Fuse or Soft Strap Disable
+#define R_PCH_PWRM_FUSE_DIS_RD_3 0x648 ///< Static PG Fuse and Soft Strap Disable Read Register 3
+#define B_PCH_PWRM_FUSE_DIS_RD_3_PNCRA3_FUSE_SS_DIS BIT3 ///< PNCRA3 Fuse or Soft Strap Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_3_PNCRA2_FUSE_SS_DIS BIT2 ///< PNCRA2 Fuse or Soft Strap Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_3_PNCRA1_FUSE_SS_DIS BIT1 ///< PNCRA1 Fuse or Soft Strap Disable
+#define B_PCH_PWRM_FUSE_DIS_RD_3_PNCRA_FUSE_SS_DIS BIT0 ///< PNCRA Fuse or Soft Strap Disable
+
+
+#endif
diff --git a/Silicon/Intel/SimicsIch10Pkg/Include/Register/PchRegsSpi.h b/Silicon/Intel/SimicsIch10Pkg/Include/Register/PchRegsSpi.h new file mode 100644 index 00000000..56831b6a --- /dev/null +++ b/Silicon/Intel/SimicsIch10Pkg/Include/Register/PchRegsSpi.h @@ -0,0 +1,304 @@ +/** @file
+ Register names for PCH SPI device.
+
+ Conventions:
+
+ - Prefixes:
+ Definitions beginning with "R_" are registers
+ Definitions beginning with "B_" are bits within registers
+ Definitions beginning with "V_" are meaningful values within the bits
+ Definitions beginning with "S_" are register sizes
+ Definitions beginning with "N_" are the bit position
+ - In general, PCH registers are denoted by "_PCH_" in register names
+ - Registers / bits that are different between PCH generations are denoted by
+ "_PCH_[generation_name]_" in register/bit names.
+ - Registers / bits that are specific to PCH-H denoted by "_H_" in register/bit names.
+ Registers / bits that are specific to PCH-LP denoted by "_LP_" in register/bit names.
+ e.g., "_PCH_H_", "_PCH_LP_"
+ Registers / bits names without _H_ or _LP_ apply for both H and LP.
+ - Registers / bits that are different between SKUs are denoted by "_[SKU_name]"
+ at the end of the register/bit names
+ - Registers / bits of new devices introduced in a PCH generation will be just named
+ as "_PCH_" without [generation_name] inserted.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _PCH_REGS_SPI_H_
+#define _PCH_REGS_SPI_H_
+
+//
+// SPI Registers (D31:F5)
+//
+
+#define PCI_DEVICE_NUMBER_PCH_SPI 31
+#define PCI_FUNCTION_NUMBER_PCH_SPI 5
+
+#define R_PCH_SPI_BAR0 0x10
+#define B_PCH_SPI_BAR0_MASK 0x0FFF
+
+#define R_PCH_SPI_BDE 0xD8
+#define B_PCH_SPI_BDE_F8 0x8000
+#define B_PCH_SPI_BDE_F0 0x4000
+#define B_PCH_SPI_BDE_E8 0x2000
+#define B_PCH_SPI_BDE_E0 0x1000
+#define B_PCH_SPI_BDE_D8 0x0800
+#define B_PCH_SPI_BDE_D0 0x0400
+#define B_PCH_SPI_BDE_C8 0x0200
+#define B_PCH_SPI_BDE_C0 0x0100
+#define B_PCH_SPI_BDE_LEG_F 0x0080
+#define B_PCH_SPI_BDE_LEG_E 0x0040
+#define B_PCH_SPI_BDE_70 0x0008
+#define B_PCH_SPI_BDE_60 0x0004
+#define B_PCH_SPI_BDE_50 0x0002
+#define B_PCH_SPI_BDE_40 0x0001
+
+#define R_PCH_SPI_BC 0xDC
+#define S_PCH_SPI_BC 4
+#define N_PCH_SPI_BC_ASE_BWP 11
+#define B_PCH_SPI_BC_ASE_BWP BIT11
+#define N_PCH_SPI_BC_ASYNC_SS 10
+#define B_PCH_SPI_BC_ASYNC_SS BIT10
+#define B_PCH_SPI_BC_OSFH BIT9 ///< OS Function Hide
+#define N_PCH_SPI_BC_SYNC_SS 8
+#define B_PCH_SPI_BC_SYNC_SS BIT8
+#define B_PCH_SPI_BC_BILD BIT7
+#define B_PCH_SPI_BC_BBS BIT6 ///< Boot BIOS strap
+#define N_PCH_SPI_BC_BBS 6
+#define V_PCH_SPI_BC_BBS_SPI 0 ///< Boot BIOS strapped to SPI
+#define V_PCH_SPI_BC_BBS_LPC 1 ///< Boot BIOS strapped to LPC
+#define B_PCH_SPI_BC_EISS BIT5 ///< Enable InSMM.STS
+#define B_PCH_SPI_BC_TSS BIT4
+#define B_PCH_SPI_BC_SRC (BIT3 | BIT2)
+#define N_PCH_SPI_BC_SRC 2
+#define V_PCH_SPI_BC_SRC_PREF_EN_CACHE_EN 0x02 ///< Prefetching and Caching enabled
+#define V_PCH_SPI_BC_SRC_PREF_DIS_CACHE_DIS 0x01 ///< No prefetching and no caching
+#define V_PCH_SPI_BC_SRC_PREF_DIS_CACHE_EN 0x00 ///< No prefetching, but caching enabled
+#define B_PCH_SPI_BC_LE BIT1 ///< Lock Enable
+#define N_PCH_SPI_BC_BLE 1
+#define B_PCH_SPI_BC_WPD BIT0 ///< Write Protect Disable
+
+//
+// BIOS Flash Program Registers (based on SPI_BAR0)
+//
+#define R_PCH_SPI_BFPR 0x00 ///< BIOS Flash Primary Region Register(32bits), which is RO and contains the same value from FREG1
+#define B_PCH_SPI_BFPR_PRL 0x7FFF0000 ///< BIOS Flash Primary Region Limit mask
+#define N_PCH_SPI_BFPR_PRL 16 ///< BIOS Flash Primary Region Limit bit position
+#define B_PCH_SPI_BFPR_PRB 0x00007FFF ///< BIOS Flash Primary Region Base mask
+#define N_PCH_SPI_BFPR_PRB 0 ///< BIOS Flash Primary Region Base bit position
+#define R_PCH_SPI_HSFSC 0x04 ///< Hardware Sequencing Flash Status and Control Register(32bits)
+#define B_PCH_SPI_HSFSC_FSMIE BIT31 ///< Flash SPI SMI# Enable
+#define B_PCH_SPI_HSFSC_FDBC_MASK 0x3F000000 ///< Flash Data Byte Count ( <= 64), Count = (Value in this field) + 1.
+#define N_PCH_SPI_HSFSC_FDBC 24
+#define B_PCH_SPI_HSFSC_CYCLE_MASK 0x001E0000 ///< Flash Cycle.
+#define N_PCH_SPI_HSFSC_CYCLE 17
+#define V_PCH_SPI_HSFSC_CYCLE_READ 0 ///< Flash Cycle Read
+#define V_PCH_SPI_HSFSC_CYCLE_WRITE 2 ///< Flash Cycle Write
+#define V_PCH_SPI_HSFSC_CYCLE_4K_ERASE 3 ///< Flash Cycle 4K Block Erase
+#define V_PCH_SPI_HSFSC_CYCLE_64K_ERASE 4 ///< Flash Cycle 64K Sector Erase
+#define V_PCH_SPI_HSFSC_CYCLE_READ_SFDP 5 ///< Flash Cycle Read SFDP
+#define V_PCH_SPI_HSFSC_CYCLE_READ_JEDEC_ID 6 ///< Flash Cycle Read JEDEC ID
+#define V_PCH_SPI_HSFSC_CYCLE_WRITE_STATUS 7 ///< Flash Cycle Write Status
+#define V_PCH_SPI_HSFSC_CYCLE_READ_STATUS 8 ///< Flash Cycle Read Status
+#define B_PCH_SPI_HSFSC_CYCLE_FGO BIT16 ///< Flash Cycle Go.
+#define B_PCH_SPI_HSFSC_FLOCKDN BIT15 ///< Flash Configuration Lock-Down
+#define B_PCH_SPI_HSFSC_FDV BIT14 ///< Flash Descriptor Valid, once valid software can use hareware sequencing regs
+#define B_PCH_SPI_HSFSC_FDOPSS BIT13 ///< Flash Descriptor Override Pin-Strap Status
+#define B_PCH_SPI_HSFSC_PRR34_LOCKDN BIT12 ///< PRR3 PRR4 Lock-Down
+#define B_PCH_SPI_HSFSC_SAF_CE BIT8 ///< SAF ctype error
+#define B_PCH_SPI_HSFSC_SAF_MODE_ACTIVE BIT7 ///< Indicates flash is attached either directly to the PCH via the SPI bus or EC/BMC
+#define B_PCH_SPI_HSFSC_SAF_LE BIT6 ///< SAF link error
+#define B_PCH_SPI_HSFSC_SCIP BIT5 ///< SPI cycle in progress
+#define B_PCH_SPI_HSFSC_SAF_DLE BIT4 ///< SAF Data length error
+#define B_PCH_SPI_HSFSC_SAF_ERROR BIT3 ///< SAF Error
+#define B_PCH_SPI_HSFSC_AEL BIT2 ///< Access Error Log
+#define B_PCH_SPI_HSFSC_FCERR BIT1 ///< Flash Cycle Error
+#define B_PCH_SPI_HSFSC_FDONE BIT0 ///< Flash Cycle Done
+#define R_PCH_SPI_FADDR 0x08 ///< SPI Flash Address
+#define B_PCH_SPI_FADDR_MASK 0x01FFFFFF ///< SPI Flash Address Mask (0~24bit)
+#define R_PCH_SPI_DLOCK 0x0C ///< Discrete Lock Bits
+#define B_PCH_SPI_DLOCK_PR0LOCKDN BIT8 ///< PR0LOCKDN
+#define R_PCH_SPI_FDATA00 0x10 ///< SPI Data 00 (32 bits)
+#define R_PCH_SPI_FDATA01 0x14 ///< SPI Data 01
+#define R_PCH_SPI_FDATA02 0x18 ///< SPI Data 02
+#define R_PCH_SPI_FDATA03 0x1C ///< SPI Data 03
+#define R_PCH_SPI_FDATA04 0x20 ///< SPI Data 04
+#define R_PCH_SPI_FDATA05 0x24 ///< SPI Data 05
+#define R_PCH_SPI_FDATA06 0x28 ///< SPI Data 06
+#define R_PCH_SPI_FDATA07 0x2C ///< SPI Data 07
+#define R_PCH_SPI_FDATA08 0x30 ///< SPI Data 08
+#define R_PCH_SPI_FDATA09 0x34 ///< SPI Data 09
+#define R_PCH_SPI_FDATA10 0x38 ///< SPI Data 10
+#define R_PCH_SPI_FDATA11 0x3C ///< SPI Data 11
+#define R_PCH_SPI_FDATA12 0x40 ///< SPI Data 12
+#define R_PCH_SPI_FDATA13 0x44 ///< SPI Data 13
+#define R_PCH_SPI_FDATA14 0x48 ///< SPI Data 14
+#define R_PCH_SPI_FDATA15 0x4C ///< SPI Data 15
+#define R_PCH_SPI_FRAP 0x50 ///< Flash Region Access Permisions Register
+#define B_PCH_SPI_FRAP_BRWA_MASK 0x0000FF00 ///< BIOS Region Write Access MASK, Region0~7 - 0: Flash Descriptor; 1: BIOS; 2: ME; 3: GbE; 4: PlatformData
+#define N_PCH_SPI_FRAP_BRWA 8 ///< BIOS Region Write Access bit position
+#define B_PCH_SPI_FRAP_BRRA_MASK 0x000000FF ///< BIOS Region Read Access MASK, Region0~7 - 0: Flash Descriptor; 1: BIOS; 2: ME; 3: GbE; 4: PlatformData
+#define B_PCH_SPI_FRAP_BMRAG_MASK 0x00FF0000 ///< BIOS Master Read Access Grant
+#define B_PCH_SPI_FRAP_BMWAG_MASK 0xFF000000 ///< BIOS Master Write Access Grant
+#define R_PCH_SPI_FREG0_FLASHD 0x54 ///< Flash Region 0(Flash Descriptor)(32bits)
+#define R_PCH_SPI_FREG1_BIOS 0x58 ///< Flash Region 1(BIOS)(32bits)
+#define R_PCH_SPI_FREG2_ME 0x5C ///< Flash Region 2(ME)(32bits)
+#define R_PCH_SPI_FREG3_GBE 0x60 ///< Flash Region 3(GbE)(32bits)
+#define R_PCH_SPI_FREG4_PLATFORM_DATA 0x64 ///< Flash Region 4(Platform Data)(32bits)
+#define R_PCH_SPI_FREG5_DER 0x68 ///< Flash Region 5(Device Expansion Region)(32bits)
+#define S_PCH_SPI_FREGX 4 ///< Size of Flash Region register
+#define B_PCH_SPI_FREGX_LIMIT_MASK 0x7FFF0000 ///< Flash Region Limit [30:16] represents [26:12], [11:0] are assumed to be FFFh
+#define N_PCH_SPI_FREGX_LIMIT 16 ///< Region limit bit position
+#define N_PCH_SPI_FREGX_LIMIT_REPR 12 ///< Region limit bit represents position
+#define B_PCH_SPI_FREGX_BASE_MASK 0x00007FFF ///< Flash Region Base, [14:0] represents [26:12]
+#define N_PCH_SPI_FREGX_BASE 0 ///< Region base bit position
+#define N_PCH_SPI_FREGX_BASE_REPR 12 ///< Region base bit represents position
+#define R_PCH_SPI_PR0 0x84 ///< Protected Region 0 Register
+#define R_PCH_SPI_PR1 0x88 ///< Protected Region 1 Register
+#define R_PCH_SPI_PR2 0x8C ///< Protected Region 2 Register
+#define R_PCH_SPI_PR3 0x90 ///< Protected Region 3 Register
+#define R_PCH_SPI_PR4 0x94 ///< Protected Region 4 Register
+#define S_PCH_SPI_PRX 4 ///< Protected Region X Register size
+#define B_PCH_SPI_PRX_WPE BIT31 ///< Write Protection Enable
+#define B_PCH_SPI_PRX_PRL_MASK 0x7FFF0000 ///< Protected Range Limit Mask, [30:16] here represents upper limit of address [26:12]
+#define N_PCH_SPI_PRX_PRL 16 ///< Protected Range Limit bit position
+#define B_PCH_SPI_PRX_RPE BIT15 ///< Read Protection Enable
+#define B_PCH_SPI_PRX_PRB_MASK 0x00007FFF ///< Protected Range Base Mask, [14:0] here represents base limit of address [26:12]
+#define N_PCH_SPI_PRX_PRB 0 ///< Protected Range Base bit position
+#define R_PCH_SPI_SFRAP 0xB0 ///< Secondary Flash Regions Access Permisions Register
+#define R_PCH_SPI_FDOC 0xB4 ///< Flash Descriptor Observability Control Register(32 bits)
+#define B_PCH_SPI_FDOC_FDSS_MASK (BIT14 | BIT13 | BIT12) ///< Flash Descritor Section Select
+#define V_PCH_SPI_FDOC_FDSS_FSDM 0x0000 ///< Flash Signature and Descriptor Map
+#define V_PCH_SPI_FDOC_FDSS_COMP 0x1000 ///< Component
+#define V_PCH_SPI_FDOC_FDSS_REGN 0x2000 ///< Region
+#define V_PCH_SPI_FDOC_FDSS_MSTR 0x3000 ///< Master
+#define V_PCH_SPI_FDOC_FDSS_PCHS 0x4000 ///< PCH soft straps
+#define V_PCH_SPI_FDOC_FDSS_SFDP 0x5000 ///< SFDP Parameter Table
+#define B_PCH_SPI_FDOC_FDSI_MASK 0x0FFC ///< Flash Descriptor Section Index
+#define R_PCH_SPI_FDOD 0xB8 ///< Flash Descriptor Observability Data Register(32 bits)
+#define R_PCH_SPI_SFDP0_VSCC0 0xC4 ///< Vendor Specific Component Capabilities Register(32 bits)
+#define B_PCH_SPI_SFDPX_VSCCX_CPPTV BIT31 ///< Component Property Parameter Table Valid
+#define B_PCH_SPI_SFDP0_VSCC0_VCL BIT30 ///< Vendor Component Lock
+#define B_PCH_SPI_SFDPX_VSCCX_EO_64K BIT29 ///< 64k Erase valid (EO_64k_valid)
+#define B_PCH_SPI_SFDPX_VSCCX_EO_4K BIT28 ///< 4k Erase valid (EO_4k_valid)
+#define B_PCH_SPI_SFDPX_VSCCX_RPMC BIT27 ///< RPMC Supported
+#define B_PCH_SPI_SFDPX_VSCCX_DPD BIT26 ///< Deep Powerdown Supported
+#define B_PCH_SPI_SFDPX_VSCCX_SUSRES BIT25 ///< Suspend/Resume Supported
+#define B_PCH_SPI_SFDPX_VSCCX_SOFTRES BIT24 ///< Soft Reset Supported
+#define B_PCH_SPI_SFDPX_VSCCX_64k_EO_MASK 0x00FF0000 ///< 64k Erase Opcode (EO_64k)
+#define B_PCH_SPI_SFDPX_VSCCX_4k_EO_MASK 0x0000FF00 ///< 4k Erase Opcode (EO_4k)
+#define B_PCH_SPI_SFDPX_VSCCX_QER (BIT7 | BIT6 | BIT5) ///< Quad Enable Requirements
+#define B_PCH_SPI_SFDPX_VSCCX_WEWS BIT4 ///< Write Enable on Write Status
+#define B_PCH_SPI_SFDPX_VSCCX_WSR BIT3 ///< Write Status Required
+#define B_PCH_SPI_SFDPX_VSCCX_WG_64B BIT2 ///< Write Granularity, 0: 1 Byte; 1: 64 Bytes
+#define R_PCH_SPI_SFDP1_VSCC1 0xC8 ///< Vendor Specific Component Capabilities Register(32 bits)
+#define R_PCH_SPI_PINTX 0xCC ///< Parameter Table Index
+#define N_PCH_SPI_PINTX_SPT 14
+#define V_PCH_SPI_PINTX_SPT_CPT0 0x0 ///< Component 0 Property Parameter Table
+#define V_PCH_SPI_PINTX_SPT_CPT1 0x1 ///< Component 1 Property Parameter Table
+#define N_PCH_SPI_PINTX_HORD 12
+#define V_PCH_SPI_PINTX_HORD_SFDP 0x0 ///< SFDP Header
+#define V_PCH_SPI_PINTX_HORD_PT 0x1 ///< Parameter Table Header
+#define V_PCH_SPI_PINTX_HORD_DATA 0x2 ///< Data
+#define R_PCH_SPI_PTDATA 0xD0 ///< Parameter Table Data
+#define R_PCH_SPI_SBRS 0xD4 ///< SPI Bus Requester Status
+#define R_PCH_SPI_SSML 0xF0 ///< Set Strap Msg Lock
+#define B_PCH_SPI_SSML_SSL BIT0 ///< Set_Strap Lock
+#define R_PCH_SPI_SSMC 0xF4 ///< Set Strap Msg Control
+#define B_PCH_SPI_SSMC_SSMS BIT0 ///< Set_Strap Mux Select
+#define R_PCH_SPI_SSMD 0xF8 ///< Set Strap Msg Data
+//
+// @todo Follow up with EDS owner if it should be 3FFF or FFFF.
+//
+#define B_PCH_SPI_SRD_SSD 0x0000FFFF ///< Set_Strap Data
+//
+// Flash Descriptor Base Address Region (FDBAR) from Flash Region 0
+//
+#define R_PCH_SPI_FDBAR_FLVALSIG 0x00 ///< Flash Valid Signature
+#define V_PCH_SPI_FDBAR_FLVALSIG 0x0FF0A55A
+#define R_PCH_SPI_FDBAR_FLASH_MAP0 0x04
+#define B_PCH_SPI_FDBAR_FCBA 0x000000FF ///< Flash Component Base Address
+#define B_PCH_SPI_FDBAR_NC 0x00000300 ///< Number Of Components
+#define N_PCH_SPI_FDBAR_NC 8 ///< Number Of Components
+#define V_PCH_SPI_FDBAR_NC_1 0x00000000
+#define V_PCH_SPI_FDBAR_NC_2 0x00000100
+#define B_PCH_SPI_FDBAR_FRBA 0x00FF0000 ///< Flash Region Base Address
+#define B_PCH_SPI_FDBAR_NR 0x07000000 ///< Number Of Regions
+#define R_PCH_SPI_FDBAR_FLASH_MAP1 0x08
+#define B_PCH_SPI_FDBAR_FMBA 0x000000FF ///< Flash Master Base Address
+#define B_PCH_SPI_FDBAR_NM 0x00000700 ///< Number Of Masters
+#define B_PCH_SPI_FDBAR_FPSBA 0x00FF0000 ///< PCH Strap Base Address, [23:16] represents [11:4]
+#define N_PCH_SPI_FDBAR_FPSBA 16 ///< PCH Strap base Address bit position
+#define N_PCH_SPI_FDBAR_FPSBA_REPR 4 ///< PCH Strap base Address bit represents position
+#define B_PCH_SPI_FDBAR_PCHSL 0xFF000000 ///< PCH Strap Length, [31:24] represents number of Dwords
+#define N_PCH_SPI_FDBAR_PCHSL 24 ///< PCH Strap Length bit position
+#define R_PCH_SPI_FDBAR_FLASH_MAP2 0x0C
+#define B_PCH_SPI_FDBAR_FCPUSBA 0x000000FF ///< CPU Strap Base Address, [7:0] represents [11:4]
+#define N_PCH_SPI_FDBAR_FCPUSBA 0 ///< CPU Strap Base Address bit position
+#define N_PCH_SPI_FDBAR_FCPUSBA_REPR 4 ///< CPU Strap Base Address bit represents position
+#define B_PCH_SPI_FDBAR_CPUSL 0x0000FF00 ///< CPU Strap Length, [15:8] represents number of Dwords
+#define N_PCH_SPI_FDBAR_CPUSL 8 ///< CPU Strap Length bit position
+//
+// Flash Component Base Address (FCBA) from Flash Region 0
+//
+#define R_PCH_SPI_FCBA_FLCOMP 0x00 ///< Flash Components Register
+#define B_PCH_SPI_FLCOMP_RIDS_FREQ (BIT29 | BIT28 | BIT27) ///< Read ID and Read Status Clock Frequency
+#define B_PCH_SPI_FLCOMP_WE_FREQ (BIT26 | BIT25 | BIT24) ///< Write and Erase Clock Frequency
+#define B_PCH_SPI_FLCOMP_FRCF_FREQ (BIT23 | BIT22 | BIT21) ///< Fast Read Clock Frequency
+#define B_PCH_SPI_FLCOMP_FR_SUP BIT20 ///< Fast Read Support.
+#define B_PCH_SPI_FLCOMP_RC_FREQ (BIT19 | BIT18 | BIT17) ///< Read Clock Frequency.
+#define V_PCH_SPI_FLCOMP_FREQ_48MHZ 0x02
+#define V_PCH_SPI_FLCOMP_FREQ_30MHZ 0x04
+#define V_PCH_SPI_FLCOMP_FREQ_17MHZ 0x06
+#define B_PCH_SPI_FLCOMP_COMP1_MASK 0xF0 ///< Flash Component 1 Size MASK
+#define N_PCH_SPI_FLCOMP_COMP1 4 ///< Flash Component 1 Size bit position
+#define B_PCH_SPI_FLCOMP_COMP0_MASK 0x0F ///< Flash Component 0 Size MASK
+#define V_PCH_SPI_FLCOMP_COMP_512KB 0x80000
+//
+// Descriptor Upper Map Section from Flash Region 0
+//
+#define R_PCH_SPI_FLASH_UMAP1 0xEFC ///< Flash Upper Map 1
+#define B_PCH_SPI_FLASH_UMAP1_VTBA 0x000000FF ///< VSCC Table Base Address
+#define B_PCH_SPI_FLASH_UMAP1_VTL 0x0000FF00 ///< VSCC Table Length
+
+#define R_PCH_SPI_VTBA_JID0 0x00 ///< JEDEC-ID 0 Register
+#define S_PCH_SPI_VTBA_JID0 0x04
+#define B_PCH_SPI_VTBA_JID0_VID 0x000000FF
+#define B_PCH_SPI_VTBA_JID0_DID0 0x0000FF00
+#define B_PCH_SPI_VTBA_JID0_DID1 0x00FF0000
+#define N_PCH_SPI_VTBA_JID0_DID0 0x08
+#define N_PCH_SPI_VTBA_JID0_DID1 0x10
+#define R_PCH_SPI_VTBA_VSCC0 0x04
+#define S_PCH_SPI_VTBA_VSCC0 0x04
+
+
+//
+// SPI Private Configuration Space Registers
+//
+#define R_PCH_PCR_SPI_CLK_CTL 0xC004
+#define R_PCH_PCR_SPI_PWR_CTL 0xC008
+#define R_PCH_PCR_SPI_ESPI_SOFTSTRAPS 0xC210
+#define B_PCH_PCR_SPI_ESPI_SOFTSTRAPS_SLAVE BIT12
+
+//
+// MMP0
+//
+#define R_PCH_SPI_STRP_MMP0 0xC4 ///< MMP0 Soft strap offset
+#define B_PCH_SPI_STRP_MMP0 0x10 ///< MMP0 Soft strap bit
+
+
+#define R_PCH_SPI_STRP_SFDP 0xF0 ///< PCH Soft Strap SFDP
+#define B_PCH_SPI_STRP_SFDP_QIORE BIT3 ///< Quad IO Read Enable
+#define B_PCH_SPI_STRP_SFDP_QORE BIT2 ///< Quad Output Read Enable
+#define B_PCH_SPI_STRP_SFDP_DIORE BIT1 ///< Dual IO Read Enable
+#define B_PCH_SPI_STRP_SFDP_DORE BIT0 ///< Dual Output Read Enable
+
+//
+// Descriptor Record 0
+//
+#define R_PCH_SPI_STRP_DSCR_0 0x00 ///< PCH Soft Strap 0
+#define B_PCH_SPI_STRP_DSCR_0_PTT_SUPP BIT22 ///< PTT Supported
+
+#endif
diff --git a/Silicon/Intel/SimicsIch10Pkg/Include/Register/X58Ich10.h b/Silicon/Intel/SimicsIch10Pkg/Include/Register/X58Ich10.h new file mode 100644 index 00000000..eac46955 --- /dev/null +++ b/Silicon/Intel/SimicsIch10Pkg/Include/Register/X58Ich10.h @@ -0,0 +1,114 @@ +/** @file
+ Various register numbers and value bits based on the following publications:
+ - Intel(R) datasheet 319973-003
+ - Intel(R) datasheet 319974-017US
+
+ Copyright (C) 2015, Red Hat, Inc.
+ Copyright (c) 2014, Gabriel L. Somlo <somlo@cmu.edu>
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef __X58_ICH10_H__
+#define __X58_ICH10_H__
+
+#include <Library/PciLib.h>
+#include <IndustryStandard/Pci22.h>
+
+//
+// Simics Host Bridge DID Address
+//
+#define SIMICS_HOSTBRIDGE_DID \
+ PCI_LIB_ADDRESS (0, 0, 0, PCI_DEVICE_ID_OFFSET)
+
+//
+// Host Bridge Device ID (DID) value for ICH10
+//
+#define INTEL_ICH10_DEVICE_ID 0x3400
+
+//
+// B/D/F/Type: 0/0/0/PCI
+//
+#define DRAMC_REGISTER_Q35(Offset) PCI_LIB_ADDRESS (0, 0, 0, (Offset))
+#define DRAMC_REGISTER_X58(Offset) PCI_LIB_ADDRESS (0, 20, 0, (Offset))
+#define MCH_GGC 0x52
+#define MCH_GGC_IVD BIT1
+
+#define MCH_PCIEXBAR_LOW 0x10C
+#define MCH_PCIEXBAR_LID 0x10E
+#define MCH_PCIEXBAR_SHIFT 16
+#define MCH_PCIEXBAR_LOWMASK 0x0FFFFFFF
+#define MCH_PCIEXBAR_BUS_FF 0
+#define MCH_PCIEXBAR_EN BIT0
+
+#define MCH_PCIEXBAR_HIGH 0x64
+#define MCH_PCIEXBAR_HIGHMASK 0xFFFFFFF0
+
+#define MCH_SMRAM 0x9D
+#define MCH_SMRAM_D_LCK BIT4
+#define MCH_SMRAM_G_SMRAME BIT3
+
+#define MCH_ESMRAMC 0x9E
+#define MCH_ESMRAMC_H_SMRAME BIT7
+#define MCH_ESMRAMC_E_SMERR BIT6
+#define MCH_ESMRAMC_SM_CACHE BIT5
+#define MCH_ESMRAMC_SM_L1 BIT4
+#define MCH_ESMRAMC_SM_L2 BIT3
+#define MCH_ESMRAMC_TSEG_8MB BIT3
+#define MCH_ESMRAMC_TSEG_2MB BIT2
+#define MCH_ESMRAMC_TSEG_1MB BIT1
+#define MCH_ESMRAMC_TSEG_MASK (BIT3 | BIT2 | BIT1)
+#define MCH_ESMRAMC_T_EN BIT0
+
+#define MCH_GBSM 0xA4
+#define MCH_GBSM_MB_SHIFT 20
+
+#define MCH_BGSM 0xA8
+#define MCH_BGSM_MB_SHIFT 20
+
+#define MCH_TSEGMB 0xA8
+#define MCH_TSEGMB_MB_SHIFT 20
+
+#define MCH_TOLUD 0xD0
+
+//
+// B/D/F/Type: 0/0x1f/0/PCI
+//
+#define POWER_MGMT_REGISTER_ICH10(Offset) \
+ PCI_LIB_ADDRESS (0, 0x1f, 0, (Offset))
+
+#define ICH10_PMBASE 0x40
+#define ICH10_PMBASE_MASK (BIT15 | BIT14 | BIT13 | BIT12 | BIT11 | \
+ BIT10 | BIT9 | BIT8 | BIT7)
+
+#define ICH10_ACPI_CNTL 0x44
+#define ICH10_ACPI_CNTL_ACPI_EN BIT7
+
+#define ICH10_GEN_PMCON_1 0xA0
+#define ICH10_GEN_PMCON_1_SMI_LOCK BIT4
+
+#define ICH10_RCBA 0xF0
+#define ICH10_RCBA_EN BIT0
+
+#define ICH10_PMBASE_IO 0x400
+//
+// IO ports
+//
+#define ICH10_APM_CNT 0xB2
+#define ICH10_APM_STS 0xB3
+
+//
+// IO ports relative to PMBASE
+//
+#define ICH10_PMBASE_OFS_SMI_EN 0x30
+#define ICH10_SMI_EN_APMC_EN BIT5
+#define ICH10_SMI_EN_GBL_SMI_EN BIT0
+#define ICH10_SMI_EN_EOS BIT1 // End of SMI
+
+#define ICH10_PMBASE_OFS_SMI_STS 0x34
+#define ICH10_SMI_STS_APM BIT5 // APM Status
+
+#define ICH10_ROOT_COMPLEX_BASE 0xFED1C000
+
+#endif
|