diff options
Diffstat (limited to 'Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/SaMiscPeiPreMemConfig.h')
| -rw-r--r-- | Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/SaMiscPeiPreMemConfig.h | 103 |
1 files changed, 103 insertions, 0 deletions
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/SaMiscPeiPreMemConfig.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/SaMiscPeiPreMemConfig.h new file mode 100644 index 00000000..2c831404 --- /dev/null +++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/SaMiscPeiPreMemConfig.h @@ -0,0 +1,103 @@ +/** @file
+ Policy details for miscellaneous configuration in System Agent
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _SA_MISC_PEI_PREMEM_CONFIG_H_
+#define _SA_MISC_PEI_PREMEM_CONFIG_H_
+
+#pragma pack(push, 1)
+
+#ifndef SA_MC_MAX_SOCKETS
+#define SA_MC_MAX_SOCKETS 4
+#endif
+
+#define SA_MISC_PEI_PREMEM_CONFIG_REVISION 3
+
+/**
+ This configuration block is to configure SA Miscellaneous variables during PEI Pre-Mem phase like programming
+ different System Agent BARs, TsegSize, IedSize, MmioSize required etc.
+ <b>Revision 1</b>:
+ - Initial version.
+ <b>Revision 2</b>:
+ - add BdatTestType, default is RMT
+ <b>Revision 3</b>:
+ - Remove SgSubSystemId.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ UINT8 SpdAddressTable[SA_MC_MAX_SOCKETS];///< Offset 28 Memory DIMMs' SPD address for reading SPD data. <b>example: SpdAddressTable[0]=0xA2(C0D0), SpdAddressTable[1]=0xA0(C0D1), SpdAddressTable[2]=0xA2(C1D0), SpdAddressTable[3]=0xA0(C1D1)</b>
+ VOID *S3DataPtr; ///< Offset 32 Memory data save pointer for S3 resume. The memory space should be allocated and filled with proper S3 resume data on a resume path
+ UINT32 MchBar; ///< Offset 36 Address of System Agent MCHBAR: <b>0xFED10000</b>
+ UINT32 DmiBar; ///< Offset 40 Address of System Agent DMIBAR: <b>0xFED18000</b>
+ UINT32 EpBar; ///< Offset 44 Address of System Agent EPBAR: <b>0xFED19000</b>
+ UINT32 SmbusBar; ///< Offset 48 Address of System Agent SMBUS BAR: <b>0xEFA0</b>
+ UINT32 GdxcBar; ///< Offset 52 Address of System Agent GDXCBAR: <b>0xFED84000</b>
+ /**
+ Offset 56 Size of TSEG in bytes. (Must be power of 2)
+ <b>0x400000</b>: 4MB for Release build (When IED enabled, it will be 8MB)
+ 0x1000000 : 16MB for Debug build (Regardless IED enabled or disabled)
+ **/
+ UINT32 TsegSize;
+ UINT32 EdramBar; ///< Offset 60 Address of System Agent EDRAMBAR: <b>0xFED80000</b>
+ /**
+ Offset 64
+ <b>(Test)</b> Size of IED region in bytes.
+ <b>0</b> : IED Disabled (no memory occupied)
+ 0x400000 : 4MB SMM memory occupied by IED (Part of TSEG)
+ <b>Note: Enabling IED may also enlarge TsegSize together.</b>
+ **/
+ UINT32 IedSize;
+ UINT8 UserBd; ///< Offset 68 <b>0=Mobile/Mobile Halo</b>, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile Halo, 7=UP Server
+ UINT8 SgMode; ///< Offset 69 SgMode: <b>0=Disabled</b>, 1=SG Muxed, 2=SG Muxless, 3=PEG
+ UINT16 SgDelayAfterPwrEn; ///< Offset 70 Dgpu Delay after Power enable using Setup option: 0=Minimal, 1000=Maximum, <b>300=300 microseconds</b>
+ UINT16 SgDelayAfterHoldReset; ///< Offset 72 Dgpu Delay after Hold Reset using Setup option: 0=Minimal, 1000=Maximum, <b>100=100 microseconds</b>
+ UINT32 SkipExtGfxScan:1; ///< <b>(Test)</b> OFfset 74:0 :1=Skip External Gfx Device Scan; <b>0=Scan for external graphics devices</b>. Set this policy to skip External Graphics card scanning if the platform uses Internal Graphics only.
+ UINT32 BdatEnable:1; ///< Offset 74:1 :This field enables the generation of the BIOS DATA ACPI Tables: <b>0=FALSE</b>, 1=TRUE.
+ UINT32 TxtImplemented:1; ///< OFfset 74:2 :This field currently is used to tell MRC if it should run after TXT initializatoin completed: <b>0=Run without waiting for TXT</b>, 1=Run after TXT initialization by callback
+ /**
+ Offset 74:3 :
+ <b>(Test)</b> Scan External Discrete Graphics Devices for Legacy Only VGA OpROMs
+
+ When enabled, if the primary graphics device is an external discrete graphics device, Si will scan the
+ graphics device for legacy only VGA OpROMs. If the primary graphics device only implements legacy VBIOS, then the
+ LegacyOnlyVgaOpRomDetected field in the SA_DATA_HOB will be set to 1.
+
+ This is intended to ease the implementation of a BIOS feature to automatically enable CSM if the Primary Gfx device
+ only supports Legacy VBIOS (No UEFI GOP Present). Otherwise disabling CSM won't result in no video being displayed.
+ This is useful for platforms that implement PCIe slots that allow the end user to install an arbitrary Gfx device.
+
+ This setting will only take effect if SkipExtGfxScan == 0. It is ignored otherwise.
+
+ - Disabled (0x0) : Don't Scan for Legacy Only VGA OpROMs (Default)
+ - <b>Enabled</b> (0x1) : Scan External Gfx for Legacy Only VGA OpROM
+ **/
+ UINT32 ScanExtGfxForLegacyOpRom:1;
+ UINT32 RsvdBits0 :28; ///< OFfset 74:4 :Reserved for future use
+ UINT8 LockPTMregs; ///< <b>(Test)</b> Offset 78 Lock PCU Thermal Management registers: 0=FALSE, <b>1=TRUE</b>
+ UINT8 BdatTestType; ///< Offset 79 When BdatEnable is set to TRUE, this option selects the type of data which will be populated in the BIOS Data ACPI Tables: <b>0=RMT</b>, 1=RMT Per Bit, 2=Margin 2D.
+ UINT8 Rsvd1[4]; ///< Offset 80 Reserved for future use
+ /**
+ Offset 84 :
+ Size of reserved MMIO space for PCI devices\n
+ <b>0=AUTO</b>, 512=512MB, 768=768MB, 1024=1024MB, 1280=1280MB, 1536=1536MB, 1792=1792MB,
+ 2048=2048MB, 2304=2304MB, 2560=2560MB, 2816=2816MB, 3072=3072MB\n
+ When AUTO mode selected, the MMIO size will be calculated by required MMIO size from PCIe devices detected.
+ **/
+ UINT16 MmioSize;
+ INT16 MmioSizeAdjustment; ///< Offset 86 Increase (given positive value) or Decrease (given negative value) the Reserved MMIO size when Dynamic Tolud/AUTO mode enabled (in MBs): <b>0=no adjustment</b>
+ UINT64 AcpiReservedMemoryBase; ///< Offset 88 The Base address of a Reserved memory buffer allocated in previous boot for S3 resume used. Originally it is retrieved from AcpiVariableCompatibility variable.
+ UINT64 SystemMemoryLength; ///< Offset 96 Total system memory length from previous boot, this is required for S3 resume. Originally it is retrieved from AcpiVariableCompatibility variable.
+ UINT32 AcpiReservedMemorySize; ///< Offset 104 The Size of a Reserved memory buffer allocated in previous boot for S3 resume used. Originally it is retrieved from AcpiVariableCompatibility variable.
+ UINT32 OpRomScanTempMmioBar; ///< <b>(Test)</b> Offset 108 Temporary address to MMIO map OpROMs during VGA scanning. Used for ScanExtGfxForLegacyOpRom feature. MUST BE 16MB ALIGNED!
+ UINT32 OpRomScanTempMmioLimit; ///< <b>(Test)</b> Offset 112 Limit address for OpROM MMIO range. Used for ScanExtGfxForLegacyOpRom feature. (OpROMScanTempMmioLimit - OpRomScanTempMmioBar) MUST BE >= 16MB!
+
+ // Since the biggest element is UINT64, this structure should be aligned with 64 bits.
+ UINT8 Rsvd[4]; ///< Reserved for config block alignment.
+} SA_MISC_PEI_PREMEM_CONFIG;
+#pragma pack(pop)
+
+#endif // _SA_MISC_PEI_PREMEM_CONFIG_H_
|