| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/srini/fastrpc.git
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
# Conflicts:
# Documentation/devicetree/bindings/vendor-prefixes.yaml
# MAINTAINERS
|
|
|
|
# Conflicts:
# drivers/pci/pci.c
|
|
Add a comment suggesting that if the endpoint controller Vendor and
Device ID are programmable, an existing entry might be usable for
testing without having to add an entry to pci_endpoint_test_tbl[].
Link: https://lore.kernel.org/linux-pci/20240611125057.1232873-6-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
|
|
Set a timeout for MKHI client send operations in the bus fixup routines
to prevent potential lock-ups on the cl_bus_lock mutex.
In rare conditions, such as when the i915 or Xe driver is stopping and
not routing interrupts or when GSC FW is in unexpectedly reset the fixup
routines can get stuck.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240615063159.1460290-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rockchip rk3588 requires 64k alignment.
While there is an existing device_id:vendor_id in the driver with 64k
alignment, that device_id:vendor_id is am654, which uses BAR2 instead of
BAR0 as the test_reg_bar, and also has special is_am654_pci_dev() checks
in the driver to disallow BAR0. In order to allow testing all BARs, add a
new rk3588 entry in the driver.
We intentionally do not add the vendor id to pci_ids.h, since the policy
for that file is that the vendor id has to be used by multiple drivers.
Hopefully, this new entry will be short-lived, as there is a series on the
mailing list which intends to move the address alignment restrictions from
this driver to the endpoint side.
Add a new entry for rk3588 in order to allow us to test all BARs.
Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-11-0a042d6b0049@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Sync to v6.10-rc3.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The CONFIG_CSD_LOCK_WAIT_DEBUG option enables debugging of hung
smp_call_function*() calls (e.g. when the target CPU gets stuck within
the callback function). Testing this option requires triggering such
hangs.
This patch adds an lkdtm test with a hung smp_call_function_single()
callback, which can be used to test CONFIG_CSD_LOCK_WAIT_DEBUG and NMI
backtraces (as CONFIG_CSD_LOCK_WAIT_DEBUG will attempt an NMI backtrace
of the hung target CPU).
On arm64 using pseudo-NMI, this looks like:
| # mount -t debugfs none /sys/kernel/debug/
| # echo SMP_CALL_LOCKUP > /sys/kernel/debug/provoke-crash/DIRECT
| lkdtm: Performing direct entry SMP_CALL_LOCKUP
| smp: csd: Detected non-responsive CSD lock (#1) on CPU#1, waiting 5000000176 ns for CPU#00 __lkdtm_SMP_CALL_LOCKUP+0x0/0x8(0x0).
| smp: csd: CSD lock (#1) handling this request.
| Sending NMI from CPU 1 to CPUs 0:
| NMI backtrace for cpu 0
| CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.9.0-rc4-00001-gfdfd281212ec #1
| Hardware name: linux,dummy-virt (DT)
| pstate: 60401005 (nZCv daif +PAN -UAO -TCO -DIT +SSBS BTYPE=--)
| pc : __lkdtm_SMP_CALL_LOCKUP+0x0/0x8
| lr : __flush_smp_call_function_queue+0x1b0/0x290
| sp : ffff800080003f30
| pmr_save: 00000060
| x29: ffff800080003f30 x28: ffffa4ce961a4900 x27: 0000000000000000
| x26: fff000003fcfa0c0 x25: ffffa4ce961a4900 x24: ffffa4ce959aa140
| x23: ffffa4ce959aa140 x22: 0000000000000000 x21: ffff800080523c40
| x20: 0000000000000000 x19: 0000000000000000 x18: fff05b31aa323000
| x17: fff05b31aa323000 x16: ffff800080000000 x15: 0000330fc3fe6b2c
| x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000279
| x11: 0000000000000040 x10: fff000000302d0a8 x9 : fff000000302d0a0
| x8 : fff0000003400270 x7 : 0000000000000000 x6 : ffffa4ce9451b810
| x5 : 0000000000000000 x4 : fff05b31aa323000 x3 : ffff800080003f30
| x2 : fff05b31aa323000 x1 : ffffa4ce959aa140 x0 : 0000000000000000
| Call trace:
| __lkdtm_SMP_CALL_LOCKUP+0x0/0x8
| generic_smp_call_function_single_interrupt+0x14/0x20
| ipi_handler+0xb8/0x178
| handle_percpu_devid_irq+0x84/0x130
| generic_handle_domain_irq+0x2c/0x44
| gic_handle_irq+0x118/0x240
| call_on_irq_stack+0x24/0x4c
| do_interrupt_handler+0x80/0x84
| el1_interrupt+0x44/0xc0
| el1h_64_irq_handler+0x18/0x24
| el1h_64_irq+0x78/0x7c
| default_idle_call+0x40/0x60
| do_idle+0x23c/0x2d0
| cpu_startup_entry+0x38/0x3c
| kernel_init+0x0/0x1d8
| start_kernel+0x51c/0x608
| __primary_switched+0x80/0x88
| CPU: 1 PID: 128 Comm: sh Not tainted 6.9.0-rc4-00001-gfdfd281212ec #1
| Hardware name: linux,dummy-virt (DT)
| Call trace:
| dump_backtrace+0x90/0xe8
| show_stack+0x18/0x24
| dump_stack_lvl+0xac/0xe8
| dump_stack+0x18/0x24
| csd_lock_wait_toolong+0x268/0x338
| smp_call_function_single+0x1dc/0x2f0
| lkdtm_SMP_CALL_LOCKUP+0xcc/0xfc
| lkdtm_do_action+0x1c/0x38
| direct_entry+0xbc/0x14c
| full_proxy_write+0x60/0xb4
| vfs_write+0xd0/0x35c
| ksys_write+0x70/0x104
| __arm64_sys_write+0x1c/0x28
| invoke_syscall+0x48/0x114
| el0_svc_common.constprop.0+0x40/0xe0
| do_el0_svc+0x1c/0x28
| el0_svc+0x38/0x108
| el0t_64_sync_handler+0x120/0x12c
| el0t_64_sync+0x1a4/0x1a8
| smp: csd: Continued non-responsive CSD lock (#1) on CPU#1, waiting 10000064272 ns for CPU#00 __lkdtm_SMP_CALL_LOCKUP+0x0/0x8(0x0).
| smp: csd: CSD lock (#1) handling this request.
| smp: csd: Continued non-responsive CSD lock (#1) on CPU#1, waiting 15000064384 ns for CPU#00 __lkdtm_SMP_CALL_LOCKUP+0x0/0x8(0x0).
| smp: csd: CSD lock (#1) handling this request.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240515120828.375585-1-mark.rutland@arm.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
We need the char-misc and iio fixes in here as well to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use fastrpc_remote_heap_alloc to allocate from the FastRPC device
instead of the Compute Bank when the session ID is 0. This ensures
that the allocation is inside the coherent DMA pool which is already
accessible to the DSP. This is necessary to support FastRPC devices
which do not have dedicated Compute Banks such as the SLPI on the SDM845.
The latter uses an allocated CMA region instead of FastRPC Compute Banks.
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
|
|
To support FastRPC Context Banks which aren't mapped via the SMMU,
make the whole reserved memory region available to the DSP to allow
access to coherent buffers.
This is performed by assigning the memory to the DSP via a hypervisor
call to set the correct permissions for the Virtual Machines on the DSP.
This is only necessary when a memory region is provided for SLPI DSPs
so guard this with a domain ID check.
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/misc/fastrpc.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
|
|
Few dev_err calls are missing newlines. This can result in unrelated
lines getting appended which might make logs difficult to understand.
Add trailing newlines to avoid this.
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
|
|
Untrusted application with access to only non-secure fastrpc device
node can attach to root_pd or static PDs if it can make the respective
init request. This can cause problems as the untrusted application
can send bad requests to root_pd or static PDs. Add changes to reject
attach to privileged PDs if the request is being made using non-secure
fastrpc device node.
Fixes: 0871561055e6 ("misc: fastrpc: Add support for audiopd")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
|
|
Audio PD daemon will allocate memory for audio PD dynamic loading
usage when it is attaching for the first time to audio PD. As
part of this, the memory ownership is moved to the VM where
audio PD can use it. In case daemon process is killed without any
impact to DSP audio PD, the daemon process will retry to attach to
audio PD and in this case memory won't be reallocated. If the invoke
fails due to any reason, as part of err_invoke, the memory ownership
is getting reassigned to HLOS even when the memory was not allocated.
At this time the audio PD might still be using the memory and an
attemp of ownership reassignment would result in memory issue.
Fixes: 0871561055e6 ("misc: fastrpc: Add support for audiopd")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
|
|
Audio PD daemon send the name as part of the init IOCTL call. This
name needs to be copied to kernel for which memory is allocated.
This memory is never freed which might result in memory leak. Free
the memory when it is not needed.
Fixes: 0871561055e6 ("misc: fastrpc: Add support for audiopd")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
|
|
When user is requesting for DSP capability, the process pd type is
getting updated to USER_PD which is incorrect as DSP will assume the
process which is making the request is a user PD and this will never
get updated back to the original value. The actual PD type should not
be updated for capability request and it should be serviced by the
respective PD on DSP side. Don't change process's PD type for DSP
capability request.
Fixes: 6c16fd8bdd40 ("misc: fastrpc: Add support to get DSP capabilities")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
|
|
User is passing capability ioctl structure(argp) to get DSP
capabilities. This argp is copied to a local structure to get domain
and attribute_id information. After getting the capability, only
capability value is getting copied to user argp which will not be
useful if the use is trying to get the capability by checking the
capability member of fastrpc_ioctl_capability structure. Copy the
complete capability structure so that user can get the capability
value from the expected member of the structure.
Fixes: 6c16fd8bdd40 ("misc: fastrpc: Add support to get DSP capabilities")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
|
|
The DSP capability request call expects 2 arguments. First is the
information about the total number of attributes to be copied from
DSP and second is the information about the buffer where the DSP
needs to copy the information. The current design is passing the
information about the size to be copied from DSP which would be
considered as a bad argument to the call by DSP causing a failure
suggesting the same. The second argument carries the information
about the buffer where the DSP needs to copy the capability
information and the size to be copied. As the first entry of
capability attribute is getting skipped, same should also be
considered while sending the information to DSP. Add changes to
pass proper arguments to DSP.
Fixes: 6c16fd8bdd40 ("misc: fastrpc: Add support to get DSP capabilities")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
|
|
gp_aux_bus_probe()
There is a memory leak (forget to free allocated buffers) in a
memory allocation failure path.
Fix it to jump to the correct error handling code.
Fixes: 393fc2f5948f ("misc: microchip: pci1xxxx: load auxiliary bus driver for the PIO function in the multi-function endpoint of pci1xxxx device.")
Signed-off-by: Yongzhi Liu <hyperlyzcs@gmail.com>
Reviewed-by: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>
Link: https://lore.kernel.org/r/20240523121434.21855-4-hyperlyzcs@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
gp_aux_bus_probe()
When auxiliary_device_add() returns error and then calls
auxiliary_device_uninit(), callback function
gp_auxiliary_device_release() calls ida_free() and
kfree(aux_device_wrapper) to free memory. We should't
call them again in the error handling path.
Fix this by skipping the redundant cleanup functions.
Fixes: 393fc2f5948f ("misc: microchip: pci1xxxx: load auxiliary bus driver for the PIO function in the multi-function endpoint of pci1xxxx device.")
Signed-off-by: Yongzhi Liu <hyperlyzcs@gmail.com>
Link: https://lore.kernel.org/r/20240523121434.21855-3-hyperlyzcs@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240510211454.2274614-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use DEVICE_ATTR_WO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240508184905.2102633-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use modern string_choices API instead of manually determining the
output using ternary operator.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240508184905.2102633-10-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is no need to have an explicit casting when we can simply use
the correct printf() specifier.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240508184905.2102633-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
sscanf() is a heavy one and moreover requires additional boundary checks.
Convert driver to use kstrtobool() in eeprom_93xx46_store_erase().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240508184905.2102633-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace open coded spi_message_init_with_transfers().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240508184905.2102633-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently there is only one way how chip is prepared and unprepared
for an operation. Drop unnecessary customisation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240508184905.2102633-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
First of all, there is no user for the platform data in the kernel.
Second, it needs a lot of updates to follow the modern standards
of the kernel, including proper Device Tree bindings and device
property handling.
For now, just hide the legacy platform data in the driver's code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240508184905.2102633-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This converts the driver to use GPIO descriptors exclusively
to retrieve GPIO lines. Drop the old GPIO handling in favor of
the core managing it exclusively.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240508184905.2102633-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The update to support other (bigger) types of EEPROMs broke
the driver loading due to removal of the default size.
Fix this by adding the respective (new) flag to the platform data.
Fixes: 14374fbb3f06 ("misc: eeprom_93xx46: Add new 93c56 and 93c66 compatible strings")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240508184905.2102633-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
Include mod_devicetable.h explicitly to replace the dropped of.h
which included mod_devicetable.h indirectly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240508184905.2102633-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When using an initializer for a union only one of the union members
must be initialized. The initializer for the acpi_object union variable
passed as argument to the SID ACPI method was initializing both
the type and the integer members of the union.
Unfortunately rather then complaining about this gcc simply ignores
the first initializer and only used the second integer.value = 1
initializer. Leaving type set to 0 which leads to the argument being
skipped by acpi acpi_ns_evaluate() resulting in:
ACPI Warning: \_SB.PC00.SPI1.SPFD.CVFD.SID: Insufficient arguments -
Caller passed 0, method requires 1 (20240322/nsarguments-232)
Fix this by initializing only the integer struct part of the union
and initializing both members of the integer struct.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device")
Reviewed-by: Wentong Wu <wentong.wu@intel.com>
Link: https://lore.kernel.org/r/20240603205050.505389-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The dynamically created mei client device (mei csi) is used as one V4L2
sub device of the whole video pipeline, and the V4L2 connection graph is
built by software node. The mei_stop() and mei_restart() will delete the
old mei csi client device and create a new mei client device, which will
cause the software node information saved in old mei csi device lost and
the whole video pipeline will be broken.
Removing mei_stop()/mei_restart() during system suspend/resume can fix
the issue above and won't impact hardware actual power saving logic.
Fixes: f6085a96c973 ("mei: vsc: Unregister interrupt handler for system suspend")
Cc: stable@vger.kernel.org # for 6.8+
Reported-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Jason Chen <jason.z.chen@intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240527123835.522384-1-wentong.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/misc/open-dice.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240603-md-misc-open-dice-v1-1-ee7972ae0d39@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The mei_me_pci_resume doesn't release irq on the error path,
in case mei_start() fails.
Cc: <stable@kernel.org>
Fixes: 33ec08263147 ("mei: revamp mei reset state machine")
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240604090728.1027307-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change level for the "not connected" client message in the write
callback from error to debug.
The MEI driver currently disconnects all clients upon system suspend.
This behavior is by design and user-space applications with
open connections before the suspend are expected to handle errors upon
resume, by reopening their handles, reconnecting,
and retrying their operations.
However, the current driver implementation logs an error message every
time a write operation is attempted on a disconnected client.
Since this is a normal and expected flow after system resume
logging this as an error can be misleading.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240530091415.725247-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5f53384118e33123d3c87b94cc8835360237698b.1717075103.git.jani.nikula@intel.com
|
|
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5c1626978d2552ef5732dcf9427c903046afb9c1.1717075103.git.jani.nikula@intel.com
|
|
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
v2: Also change Documentation/gpu/i915.rst (Andi)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a8c07233a8234858eb6711140482ef8db4c91cf4.1717075103.git.jani.nikula@intel.com
|
|
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/461662d528c3f327c81b764b7c883cd4519d8729.1717075103.git.jani.nikula@intel.com
|
|
The current code uses writel()/readl(), which has an implicit memory
barrier for every single readl()/writel().
Additionally, reading 4 bytes at a time over the PCI bus is not really
optimal, considering that this code is running in an ioctl handler.
Use memcpy_toio()/memcpy_fromio() for BAR tests.
Before patch with a 4MB BAR:
$ time /usr/bin/pcitest -b 1
BAR1: OKAY
real 0m 1.56s
After patch with a 4MB BAR:
$ time /usr/bin/pcitest -b 1
BAR1: OKAY
real 0m 0.54s
Link: https://lore.kernel.org/linux-pci/20240322164139.678228-1-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
|
|
dma_set_mask_and_coherent() should never fail when the mask is >= 32bit,
unless the architecture has no DMA support. So no need to check for the
error and also no need to set dma_set_mask_and_coherent(32) as a fallback.
Even if dma_set_mask_and_coherent(48) fails due to the lack of DMA support
(theoretically), then dma_set_mask_and_coherent(32) will also fail for the
same reason. So the fallback doesn't make sense.
Simplify the code by setting the streaming and coherent DMA mask to 48
bits.
Link: https://lore.kernel.org/linux-pci/20240502195903.3191049-1-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
Switching to memdup_user() overwrites the allocated memory only once,
whereas kzalloc() followed by copy_from_user() initializes the allocated
memory to zero and then immediately overwrites it.
Fixes the following Coccinelle/coccicheck warning reported by
memdup_user.cocci:
WARNING opportunity for memdup_user
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing cleanup from Steven Rostedt:
"Remove second argument of __assign_str()
The __assign_str() macro logic of the TRACE_EVENT() macro was
optimized so that it no longer needs the second argument. The
__assign_str() is always matched with __string() field that takes a
field name and the source for that field:
__string(field, source)
The TRACE_EVENT() macro logic will save off the source value and then
use that value to copy into the ring buffer via the __assign_str().
Before commit c1fa617caeb0 ("tracing: Rework __assign_str() and
__string() to not duplicate getting the string"), the __assign_str()
needed the second argument which would perform the same logic as the
__string() source parameter did. Not only would this add overhead, but
it was error prone as if the __assign_str() source produced something
different, it may not have allocated enough for the string in the ring
buffer (as the __string() source was used to determine how much to
allocate)
Now that the __assign_str() just uses the same string that was used in
__string() it no longer needs the source parameter. It can now be
removed"
* tag 'trace-assign-str-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/treewide: Remove second parameter of __assign_str()
|
|
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- virtio-net is finally supported in vduse
- virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster
And fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
virtio-pci: Check if is_avq is NULL
virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
MAINTAINERS: add Eugenio Pérez as reviewer
vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
vp_vdpa: don't allocate unused msix vectors
sound: virtio: drop owner assignment
fuse: virtio: drop owner assignment
scsi: virtio: drop owner assignment
rpmsg: virtio: drop owner assignment
nvdimm: virtio_pmem: drop owner assignment
wifi: mac80211_hwsim: drop owner assignment
vsock/virtio: drop owner assignment
net: 9p: virtio: drop owner assignment
net: virtio: drop owner assignment
net: caif: virtio: drop owner assignment
misc: nsm: drop owner assignment
iommu: virtio: drop owner assignment
drm/virtio: drop owner assignment
gpio: virtio: drop owner assignment
firmware: arm_scmi: virtio: drop owner assignment
...
|
|
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
|
