diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml | 144 |
1 files changed, 85 insertions, 59 deletions
diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml index 0c75d8bde568..0c6e1870db1d 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml @@ -19,110 +19,136 @@ properties: const: qcom,pm8008 reg: - description: - I2C slave address. - maxItems: 1 interrupts: maxItems: 1 - description: Parent interrupt. + reset-gpios: + maxItems: 1 + + vdd-l1-l2-supply: true + vdd-l3-l4-supply: true + vdd-l5-supply: true + vdd-l6-supply: true + vdd-l7-supply: true - "#interrupt-cells": + gpio-controller: true + + "#gpio-cells": const: 2 - description: | - The first cell is the IRQ number, the second cell is the IRQ trigger - flag. All interrupts are listed in include/dt-bindings/mfd/qcom-pm8008.h. + gpio-ranges: + maxItems: 1 interrupt-controller: true - "#address-cells": - const: 1 + "#interrupt-cells": + const: 2 - "#size-cells": + "#thermal-sensor-cells": const: 0 -patternProperties: - "^gpio@[0-9a-f]+$": + pinctrl: type: object + additionalProperties: false + patternProperties: + "-state$": + type: object - description: | - The GPIO peripheral. This node may be specified twice, one for each GPIO. - - properties: - compatible: - items: - - const: qcom,pm8008-gpio - - const: qcom,spmi-gpio - - reg: - description: Peripheral address of one of the two GPIO peripherals. - maxItems: 1 - - gpio-controller: true - - gpio-ranges: - maxItems: 1 + allOf: + - $ref: /schemas/pinctrl/pinmux-node.yaml + - $ref: /schemas/pinctrl/pincfg-node.yaml - interrupt-controller: true + properties: + pins: + items: + pattern: "^gpio[12]$" - "#interrupt-cells": - const: 2 + function: + items: + - enum: + - normal - "#gpio-cells": - const: 2 + required: + - pins + - function - required: - - compatible - - reg - - gpio-controller - - interrupt-controller - - "#gpio-cells" - - gpio-ranges - - "#interrupt-cells" + additionalProperties: false + regulators: + type: object additionalProperties: false + patternProperties: + "^ldo[1-7]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false required: - compatible - reg - interrupts - - "#address-cells" - - "#size-cells" + - vdd-l1-l2-supply + - vdd-l3-l4-supply + - vdd-l5-supply + - vdd-l6-supply + - vdd-l7-supply + - gpio-controller + - "#gpio-cells" + - gpio-ranges + - interrupt-controller - "#interrupt-cells" + - "#thermal-sensor-cells" additionalProperties: false examples: - | - #include <dt-bindings/mfd/qcom-pm8008.h> + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> i2c { #address-cells = <1>; #size-cells = <0>; - pmic@8 { + pm8008: pmic@8 { compatible = "qcom,pm8008"; reg = <0x8>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <2>; interrupt-parent = <&tlmm>; interrupts = <32 IRQ_TYPE_EDGE_RISING>; - pm8008_gpios: gpio@c000 { - compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio"; - reg = <0xc000>; - gpio-controller; - gpio-ranges = <&pm8008_gpios 0 0 2>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; + reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>; + + vdd-l1-l2-supply = <&vreg_s8b_1p2>; + vdd-l3-l4-supply = <&vreg_s1b_1p8>; + vdd-l5-supply = <&vreg_bob>; + vdd-l6-supply = <&vreg_bob>; + vdd-l7-supply = <&vreg_bob>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8008 0 0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + #thermal-sensor-cells = <0>; + + pinctrl { + gpio-keys-state { + pins = "gpio1"; + function = "normal"; + }; + }; + + regulators { + ldo1 { + regulator-name = "vreg_l1"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + }; }; }; }; |