Age | Commit message (Collapse) | Author |
|
OP-TEE is only enabled on HiKey. Move it to the hardware pack instead
being installed by default, and cause timeout/delayed boot on other
boards.
Change-Id: I5263e570ee3235302edca11e46c5047834bd88de
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
|
|
Sort all package list files , it makes it simpler to diff all files..
This commit should be idempotent, it was done with this command
$ find . -name linaro.list.chroot | LANG=C xargs -i sort {} -o {}
Let's try to keep the lists sorted from now on.
Change-Id: Ief24a8c9223b1783244260fcf997d4047c70c431
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
Change-Id: Ic8974441b08d28489e9be186c9df1a71f38d9a46
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
Currently users with 3G/4G modems can get online using manual scripting
but cannot can get online using the NetworkManager GUI. Including
ModemManager has been confirmed as sufficient to configure Mobile
Broadband using NetworkManager.
Change-Id: Ic620da85f3d1d5cf512beffea3aca87210871ed0
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
|
|
So users with 3G/4G modems can get online without without installing
additional packages.
Requested by Daniel Thompson.
Change-Id: I69300f2e1d84fcc2d77f818812b42e348fc031ff
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
|
|
Make sure resolvconf doesn't create an empty resolv.conf
by including google's unicast dns server as last option.
Change-Id: Ic046fd286ffda09d5fc6c552842e6d5ec4fd1f16
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
There is no specific reason why we are calling the package-list file based on
the image name. All files are already in the appropriate subfolder base on image
name. Having different file names makes it less convenient when trying to look
at differences between images..
This patchset was created using this command:
for i in `ls */customization/package-lists/* `; do \
git mv $i `dirname $i`/linaro.list.chroot; done
And is of course not supposed to bring any change in the generated images.
Change-Id: I93d0d1f8583a9950cbbd9e391346742a2893dbf2
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
|
|
Change-Id: Id438bd59bdcb5012aad9095436ae66d4f698778d
Reported-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
|
|
A quick dist-upgrade shows the following packages get upgraded compared
to the current white-list based pin:
- pulseudio (new upstream version)
- blueman 1.99rc -> 2.0
- seccomp (replaces linaro backport)
- ffmpeg (replaces linaro backport)
- libuv (replaces linaro backport)
Rest are some minor command line utilities.
Change-Id: Ic1f77c5c0ee0bed11597d77f8bda3676f05881d0
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
latest package adds python bindings for libsoc.
Pull python-libsoc instead of the runtime library lilbsoc2.
Change-Id: If79bc2b6dd7e2000b2bb139c9589d6f4e89e9aeb
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
|
|
while hostapd is installed by default in our images, dnsmasq and iptables are
needed to properly setup and use Wifi Hotspot.
This was tested on DB410c with Gnome-shell 'hotspot' setup tools and LXDE with
NetworkManager configuration tools.
Change-Id: I20d0588512fce37d67e3e37bbc616d943b48cd5a
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
This file is created by debian-installer, so not really provided by any
package. It's mainly useful to make the linux-image package to behave as
it would normally do in a system installed with debian-installer.
BugLink: https://bugs.96boards.org/show_bug.cgi?id=316
Change-Id: Ia4fe1eb27cf0a0c036b79bef152288ed44323e44
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
|
|
It will pull also MRAA and UPM libraries.
https://projects.linaro.org/browse/BB-303
https://projects.linaro.org/browse/BB-304
Change-Id: I0b30644324b8e9d17956ab020df25154828ed472
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
|
|
https://projects.linaro.org/browse/BB-305
Change-Id: If9aea83d906e7ebe6c73b80f1fa7adaa5c4a95ff
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
|
|
https://bugs.linaro.org/show_bug.cgi?id=2057
Change-Id: I2a560d17e2ee1506020d377d61d9461ec2b30945
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
|
|
libxatracker is needed for freedreno. Since we are using mesa from Debian
backport, we need to ensure that this library is installed in the generic
rootfs, as it cannot be pulled properly in the derived images (missing backport
support in hwpack create).
It is likely a temporary change which can be reverted later.
Change-Id: I60b878b8c55462b67656706a79adcd4ef64e9858
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
Change-Id: Ic6e4758a44e83e177c4f364dc45e9dd4d2b0e1a8
|
|
Hidden in the live-build version we use:
# probably too bold, needs refinment (FIXME)
rm -f chroot/etc/apt/conf.d/*
rm -f chroot/etc/apt/preferences.d/*
live-build wants us to use repo.pref.{chroot,binary} snippets
over include.chroot changes.
Change-Id: Id72b2a5714d04d7b7411b9680ebb55b742748ad6
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Change-Id: I72ff90e88a36c7a577113cad31e64a75a240fa16
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
For linaro-media-create to work with this change, patch
7f08d927635e86c8f24c5b8ab5a2b88f70b1d257 is required (latest head).
Change-Id: I92cedc65a6cea6a9241cf210179b2a26cf1cd34a
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
|
|
Not used, and also gksu is not the recommended way anymore (pkexec is
the supported method now)
Change-Id: Id5e0efa3b69643aae6d9980890867356939e04f6
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
|
|
Change-Id: I868cc00040704ae4c8a518e50b9c2ebd9cd501d7
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
|
|
Adding linaro user to the following additional groups:
- sudo: default group to handle sudo access in debian
- systemd-journal: for command journalctl
- netdev: manage network interfaces
- staff: allow modifying /usr/local without needing root
Change-Id: Id32f5771f3ca52ab322d265db251a613c9291f2e
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
|
|
Simplifying logic to use a for instead of duplicating every new entry.
Change-Id: I92a5431b780635354a6c6bf20dbbbbd2a62113ba
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
|
|
Change-Id: Idee265e00929ebb387875741d8bc26b4de1c37f3
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
|
|
Change-Id: Id0024ffaae8ada19d0a2e2364f98306b78c0b306
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
|
|
This is needed for gst-launch-1.0 which is quite useful for anybody using
Gstreamer.
Installing it on a freshly flashed ALIP image (on arm64) shows this:
root@linaro-alip:~# apt-get install gstreamer1.0-tools
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
pkg-config
The following NEW packages will be installed:
gstreamer1.0-tools pkg-config
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 918 kB of archives.
After this operation, 1084 kB of additional disk space will be used.
So this will have very limited impact on the image size...
Change-Id: I866c23b3ba654fae5a122267c7fb3fa12c0a1e6e
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
daemon serving the Trusted OS in secure world with miscellaneous features,
such as file system access.
Change-Id: I84659ce8b92f3b817808362ac52d01fdd6d91b3e
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
|
|
96boards packages were updated to only contain the 96boards specific
content (wallpaper), and generic artworks/settings were moved to
linaro-* packages.
Change-Id: I843dc8d01ce9a17dc18e5cf12c1013a856379ea0
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
|
|
Now that chromium is loaded to linaro-overlay, we can switch over.
For arm64 this is no-brainer, the chromium works a lot better than
iceweasel. For armhf there is not much difference.
The tar.gz grows from 549.2M to 569M, ie 20MB. Some of that is caused
by backported ffmpeg now being part of image.
Change-Id: I83e6a65abd6ead3167bab019e3efd3d52458669b
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
parted is used to resize partition
Change-Id: I8fd68a6f0bf9e204d99110d634910978eba7e297
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
|
|
Change-Id: Ie38f61fa76083e391a608621c81bbfa71e7eecf5
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
|
|
replace nodejs by nodejs-legacy as it seems AWS SDK is using the legay
symlink to Node.js binary.
Change-Id: I1ba644b9b024eefd9cb5a5501a05eca7521cc49c
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
|
|
This reverts commit cf785a534908068d7cb8e7d7832a9084e7601fa8.
Until we can find out a fix for
https://bugs.96boards.org/show_bug.cgi?id=150
Change-Id: I3c65b9bbbcd1af0dc6b8af8fcaffb0ea3b2eb8b1
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
|
|
Change-Id: I5714c4b9085055430be0bdbbad9012072f2ef9c3
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
|
|
|
|
Without gvfs (libgvfsdbus) automount doesn't work properly.
Change-Id: I7bc6a758226d761b6060d74bb8170c0d90210209
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
|
|
Package created to share common configs and tools for 96Boards. At this
moment this package only includes one udev rule to link the tty uart
interfaces, but it will also incorporate additional tools later on.
Change-Id: Ib0543c8f399f45b1ab8e3070c28d6c46382771f1
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
|
|
evtest adds the functionality required to monitor and query input
devices.
Change-Id: I50f65c5e113da03f2542df9e5f8c11b7c886aba5
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
|
|
Small and useful tool to help determining file types.
Change-Id: I70b0dfc1a3bce4ff4dbe8975b07d9b928d4c1161
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
|
|
This reverts commit d365971afb218b9143e250976cf52f6fc9b92899.
Still use OpenJDK 8 but via the default-jre package backported from experimental.
It will pull OpenJDK 8 instead of OpenJDK 7.
Change-Id: I7a890bee7ddf506035022e95af65e2af4e57d566
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
|
|
|
|
Basic set of system tools for a more useful UI session, covering things
like users and groups, date and time, etc.
Change-Id: I824130c5198d60c6cb88a1eaac7678ec0684bb44
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
|
|
Minimal set of desktop-like tools to handle power management (screen
blanking, screen lock, suspend, resume, etc)
Change-Id: I71faed911b0d05383b10b3de354cebf3428ccf13
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
|
|
enable sdcard/usbdisk automount
Change-Id: I023a9d044bc8ab3b9e559605b7990e9e324ed0a7
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
|
|
Artwork includes another default theme, and settings the required
changes to enable such artwork by default.
Packages now available at linaro-overlay.
Change-Id: I5fe32a0116b8958b57a673c2fcc2eaeea4c0086f
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
|
|
|
|
It requires jessie-backports to be enabled.
Change-Id: I22d0fcae36e1a176845f7c50ce712f75da27880e
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
|
|
This reverts commit 05584ed896a54ddcb37662137ace420a9a803139.
It's causing rootfs build failures:
E: Unable to locate package 96boards-artwork
E: Unable to locate package 96boards-default-settings
Temporary revert until it's sorted out.
Change-Id: I203c87d0afa80e40a72287950f7b93e00028d1f5
|