aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-12-12Remove assignment of unused variable.HEADmasterAxel Fagerstedt
ST-Ericsson ID: 350357 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I3abc52afb628cfe91b957f0c1635d7bc293e5b35 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/40812 Reviewed-by: Hakan GARDRUP <hakan.gardrup@stericsson.com> Reviewed-by: Piotr TOMASZEWSKI <piotr.tomaszewski@stericsson.com> Tested-by: Piotr TOMASZEWSKI <piotr.tomaszewski@stericsson.com> Change-Id: I383fd0ad3b6e26679101519f612ee581ff4f3a00 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/40698 Reviewed-by: QATOOLS Reviewed-by: QATEST Tested-by: Axel FAGERSTEDT <axel.fagerstedt@stericsson.com> Reviewed-by: Johan YDSTROM <johan.xj.ydstrom@stericsson.com>
2011-12-08u5500: Add support for v2.1Preetham Rao K
Add secure bridge entry for Maja v2.1 Add reading cpu id ST-Ericsson ID: 374507 ST-Ericsson FOSS-OUT ID: NA Change-Id: I0cbfeb40a1be94fe53e3e8983bd10a95d9fabe38 Signed-off-by: Preetham Rao K <preetham.rao@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/38176 Reviewed-by: P.Hanumath PRASAD <hanumath.prasad@stericsson.com> Reviewed-by: Naveen Kumar GADDIPATI <naveen.gaddipati@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: QABUILD
2011-12-08u5500: Support to store crashdump to SD cardaurla000
The support for storing the crashdump from kernel to SD card on softreset is provided in u-boot. ST-Ericsson ID: 340331 ST-Ericsson FOSS-OUT ID: NA Signed-off-by: aurla000 <apparao.urla@stericsson.com> Change-Id: I34131a6b6e25b99e202f444daca66f2d67b4cde6 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/41225 Reviewed-by: P.Hanumath PRASAD <hanumath.prasad@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: Naveen Kumar GADDIPATI <naveen.gaddipati@stericsson.com> Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com>
2011-12-07u5500: Add backlight supportSesahgiri.Holi
Add support to enable backlight. ST-Ericsson ID: 351748 ST-Ericsson FOSS-OUT ID: NA Change-Id: I8f4e7cacabf4d1f412b9c92effdabde124c6d9a5 Signed-off-by: Sesahgiri.Holi <seshagiri.holi@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/41115 Reviewed-by: QATOOLS Reviewed-by: Naveen Kumar GADDIPATI <naveen.gaddipati@stericsson.com> Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com>
2011-12-01Added required build targetsHans Odeberg
The ux500.mak build system will be restructured to require the following make targets from all modules invoked by it: config, build, install, clean, distclean. ST-Ericsson ID: 374403 ST-Ericsson FOSS-OUT ID: NA Change-Id: I907ab207be9c6b80f5d0d89562c2abbd43afc94c Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/39513 Reviewed-by: Axel LILLIECRANTZ <axel.lilliecrantz@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: Johan YDSTROM <johan.xj.ydstrom@stericsson.com> Tested-by: Hans ODEBERG <hans.odeberg@stericsson.com>
2011-11-25Add support for AP9500 in same binary as for U8500Paer-Olof Haakansson
Checks ASIC ID and skips trying to load ITP and modem in case the ASIC belongs to the AP9500 family. Copies tee functionality from U5500 board and uses secure world call to retrieve the ASIC ID. ST-Ericsson ID: 363927 ST-Ericsson FOSS-OUT ID: NA Change-Id: I37aed523679e62286e2ac023ce75e928afe3fcf1 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35765 Reviewed-by: QATOOLS Reviewed-by: Daniel FLINK <daniel.flink@stericsson.com> Reviewed-by: QATEST Reviewed-by: Par-Olof HAKANSSON <par-olof.hakansson@stericsson.com> Tested-by: Par-Olof HAKANSSON <par-olof.hakansson@stericsson.com>
2011-11-24ux500: Set build dependency for mk_envimgrickard evertsson
Fixes build problem when multiple build threads are used, e.g. -j8. This sets a dependency between mk_envimg and u-boot. ST-Ericsson ID: - ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: - Change-Id: I7350ea7d9a3ab23970a4f33e49a23b4334f95a4a Signed-off-by: rickard evertsson <rickard.evertsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/39671 Tested-by: Daniel TAMMINEN <daniel.tamminen@stericsson.com> Reviewed-by: Par-Olof HAKANSSON <par-olof.hakansson@stericsson.com>
2011-11-21U5500: Correct key matrix logicSesahgiri.Holi
ST-Ericsson ID: 398141 ST-Ericsson FOSS-OUT ID: NA Signed-off-by: Sesahgiri.Holi <seshagiri.holi@stericsson.com> Change-Id: I0c0c23a6806add158ecf58e1e7f58f204208a636 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/38519 Reviewed-by: Naveen Kumar GADDIPATI <naveen.gaddipati@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: Johan YDSTROM <johan.xj.ydstrom@stericsson.com>
2011-11-15u8500: Fix of coverity errors in dump handlerPaer-Olof Haakansson
Fixes missing check of NULL pointer after malloc and trivial missing free of data. ST-Ericsson ID: 365050 ST-Ericsson FOSS-OUT ID: NA Change-Id: I0d2c0d6cc2fffaf7ffeec97742134c4814b3e7aa Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/37842 Reviewed-by: Per FRANSSON <per.xx.fransson@stericsson.com> Reviewed-by: Par-Olof HAKANSSON <par-olof.hakansson@stericsson.com> Tested-by: Par-Olof HAKANSSON <par-olof.hakansson@stericsson.com>
2011-11-04u8500: accept signed SW when in unsecure modePaer-Olof Haakansson
A signed kernel shall be accepted also when signing is not required. The image is checked to find out whether it is signed, in that case the pointer to the image is updated to point after the header. ST-Ericsson ID: 340102 ST-Ericsson FOSS-OUT ID: NA Change-Id: If8de7c4a9c2e11af8522484db2390e1177454cf6 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/36481 Tested-by: Par-Olof HAKANSSON <par-olof.hakansson@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: Johan YDSTROM <johan.xj.ydstrom@stericsson.com> Reviewed-by: Par-Olof HAKANSSON <par-olof.hakansson@stericsson.com>
2011-11-03U8500: Decide secure boot in runtimePaer-Olof Haakansson
Previously the compile time switch CONFIG_SECURE_KERNEL_BOOT decided if the Linux kernel and the modem images should be verified. Now this is handled in runtime by checking BOOT_AREA_SECURE_BOOT_BIT_INDEX in secprofile ST-Ericsson ID: 340102 ST-Ericsson FOSS-OUT ID: NA Change-Id: I65a611a45c2e9eaeb01f2f7aa9054b246d488603 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/36186 Reviewed-by: Johan YDSTROM <johan.xj.ydstrom@stericsson.com> Reviewed-by: Par-Olof HAKANSSON <par-olof.hakansson@stericsson.com> Tested-by: Par-Olof HAKANSSON <par-olof.hakansson@stericsson.com>
2011-10-04u8500: Dump after SW reset at kernel crashPer Fransson
ST-Ericsson ID: 340331 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ie889ac1742da3244fa8fc6a8edf529b6c287f331 Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32691 Reviewed-by: QATOOLS Reviewed-by: QATEST Reviewed-by: Wenhai FANG <wenhai.h.fang@stericsson.com> Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com>
2011-10-04u8500: Create dump ELF based on 'memargs'Per Fransson
If there is no elfcorehdr available when dumping, create one based on the memargs environment variable. ST-Ericsson ID: 340331 ST-Ericsson FOSS-OUT ID: NA Change-Id: Ia5a2ecd427d98e61010f13c68bc8056c81f7d76f Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32692 Reviewed-by: QATOOLS Reviewed-by: Wenhai FANG <wenhai.h.fang@stericsson.com> Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com>
2011-09-29u5500:Read cspsa bit to check modem typeaurla000
Add support to read cspsa bit and set the boot args to kernel to identify modem type. ST-Ericsson ID: 337490 ST-Ericsson FOSS-OUT ID: NA ST-Ericsson Linux next: NA Signed-off-by: aurla000 <apparao.urla@stericsson.com> Change-Id: Id5f6f1747d1568bb49ccf66fba8b7cc29ec10ede Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/31963 Reviewed-by: Seshagiri HOLI <seshagiri.holi@stericsson.com> Tested-by: Seshagiri HOLI <seshagiri.holi@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com>
2011-09-28u8500: Add Support for DB8520WenHai Fang
Add DB8520 support ST-Ericsson ID: 353334 ST-Ericsson FOSS-OUT ID: NA Signed-off-by: WenHai Fang <wenhai.h.fang@stericsson.com> Change-Id: I88b67c577e4a4d304b1d5057ab36c39158c63d37 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32189 Reviewed-by: QATOOLS Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com>
2011-09-28u5500:Flush noise when UART cable is not connectNaveen Kumar Gaddipati
Avoid noise when console UART cable is not connected and service mode is off by flushing the RX fifo. ST-Ericsson ID: 363780 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Icbf4c80f16af601bd8718da42626e81ce9e07952 Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/31955 Reviewed-by: QATOOLS Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com>
2011-09-24u-boot:u5500:Fix for the touch screen issueSesahgiri.Holi
Avoid configuring of all keypad GPIO pins, instead enable only the lines which are in mapped to device. Due this touch screen GPIO is effected. Depends-On: Ic051b19363b015c0db969fbe364916342041dda6 ST-Ericsson ID: 324044 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Signed-off-by: Sesahgiri.Holi <seshagiri.holi@stericsson.com> Change-Id: Id869fb8d54f8ad23502709ffdb60e84ef48db8c1 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/31712 Reviewed-by: QATOOLS Reviewed-by: QATEST Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com>
2011-09-24BUILD: Move splash screen copy to product.mk fileJohn Beckett
There is a change to remove the ability for individual modules to update the variable PRODUCT_COPY_FILES, it now has to be updated centrally. ST-Ericsson ID: 358663 ST-Ericsson FOSS-OUT ID: NA Depends-On: I167b8ca49976d1b4f117bcbeac3caf8d8f522fed Change-Id: I05e9f283077f2673d23061fc594349b669f89e63 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30594 Reviewed-by: John BECKETT <john.beckett@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: QATEST Reviewed-by: QABUILD Reviewed-by: Duncan PATERSON <duncan.paterson@stericsson.com> Reviewed-by: Chris KIMBER <chris.kimber@stericsson.com> Tested-by: Chris KIMBER <chris.kimber@stericsson.com> Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com>
2011-09-20u-boot:u5500:Add keypad support in u-boot.Sesahgiri.Holi
Add keypad support in u-boot to program the device in service mode. ST-Ericsson ID: 324044 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Signed-off-by: Sesahgiri.Holi <seshagiri.holi@stericsson.com> Change-Id: Ic051b19363b015c0db969fbe364916342041dda6 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/29408 Reviewed-by: QATOOLS Reviewed-by: QATEST Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com> Tested-by: Preetham-rao K <preetham.rao@stericsson.com>
2011-09-19u5500:Avoid hangs in modem and itp loadingNaveen Kumar Gaddipati
Avoid hangs in failures of modem and itp loading in u-boot by removing the infinite loops. ST-Ericsson ID: 362076 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> Change-Id: Ib42302e7e34436ee840b408f3291a355374bcb29 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/31303 Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com> Tested-by: Preetham-rao K <preetham.rao@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: Joakim BECH <joakim.xx.bech@stericsson.com>
2011-09-14Add u9500_def_configMichael Brannigan
Allow lbp build for u9500_21 ST-Ericsson ID: 340153 ST-Ericsson FOSS-OUT ID: NA Change-Id: I0c21efa8ed860e69bf7563dcdd41af0d567c932c Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30601 Tested-by: Michael BRANNIGAN <mike.xx.brannigan@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: QATEST Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2011-08-30U5500: Set PRCMU bit for soft reset in ubootSesahgiri.Holi
Need to set APE soft reset control register reset bit in PRCMU(PRCMUBaseAddress + 0x228) ST-Ericsson ID: 358474 ST-Ericsson FOSS-OUT ID: NA Signed-off-by: Sesahgiri.Holi <seshagiri.holi@stericsson.com> Change-Id: I1d7e0af6d61d451801bca4ea4bdde398a6432069 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/29513 Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: QATEST Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com> Tested-by: Preetham-rao K <preetham.rao@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2011-08-09u5500:Dynamic detection of bootable MMCNaveen Kumar Gaddipati
Dynamic detection of booting device by reading ROM debug register from BACKUP RAM and register the corresponding EMMC. This is done due to wrong configuration of MMC0 clock in ROM code for u5500 v2. ST-Ericsson ID: 352552 ST-Ericsson FOSS-OUT ID: NA Change-Id: Id5d2260626f57641a5e6124b5b1051edad57223a Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/27664 Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com> Tested-by: Preetham-rao K <preetham.rao@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: QATEST
2011-08-08u5500:Removed the Deadcode errorNaveen Kumar Gaddipati
Deadcode error is removed by modifying the decrement of retry count for ab5500 read and write. ST-Ericsson ID: 354434 ST-Ericsson FOSS-OUT ID: NA Change-Id: I92a788243881ca920008f05b1c6dd311af95d2df Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/28026 Reviewed-by: QATEST Reviewed-by: QATOOLS Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com> Tested-by: Preetham-rao K <preetham.rao@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2011-08-08u8500: Add commands to read and write into ab8500Rikard Olsson
Added commands: ab8500_read ab8500_write (type help <command> in U-Boot shell for help) ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson ID: -- Change-Id: I8fe7c1d2c2ac9dea17990784ea87fdb45279c630 Signed-off-by: Rikard Olsson <rikard.p.olsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/28207 Reviewed-by: QATEST Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2011-07-18u5500: Add uart0 rx interrupts support for 5500v2Naveen Kumar Gaddipati
Add uart0 rx interrupts support for 5500v2 by removing the alternateB functionality for GPIO64 and GPIO65. ST-Ericsson ID: 349062 ST-Ericsson FOSS-OUT ID: NA Change-Id: If5a91118fba97345920edeba1602820561e5c195 Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/27228 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: QATEST Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com> Tested-by: Preetham-rao K <preetham.rao@stericsson.com>
2011-07-13u5500: Adding bridge entry for v2Preetham Rao K
Add secure bridge entry for v2 ST-Ericsson ID: 349062 Signed-off-by: Preetham Rao K <preetham.rao@stericsson.com> Change-Id: I8eeb04db2d2869bdd6362f677bcb1f9eca8099de Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/26865 Reviewed-by: QATEST Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Hans HOLMBERG <hans.xh.holmberg@stericsson.com>
2011-07-11U8500: HATS: Add uart mode support in hats commandOlivier ARNAUD
Using this command will allow to: 1) redirect kernel console to /dev/null 2) transmit userpace scripts/daemons information through kernel commandline. ST-Ericsson ID: 349077 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I8faa3fdabcd516a23a3ebb4431cde36daf6f7438 Signed-off-by: Olivier ARNAUD <o.arnaud@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/26683 Reviewed-by: QATOOLS Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: QATEST Reviewed-by: Gerald LEJEUNE <gerald.lejeune@stericsson.com> Tested-by: Gerald LEJEUNE <gerald.lejeune@stericsson.com>
2011-07-05u5500:Supporting Maja V2 versionNaveen Kumar Gaddipati
Add support for Maja V2 version by modifying the MMC code to support blocksize by shifting the bits in the register and also enable the doze mode. ST-Ericsson ID: 349062 ST-Ericsson FOSS-OUT ID: NA Change-Id: I3fd3e4f3d05262bc02413735e297b173d326578b Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/26493 Reviewed-by: QATEST Reviewed-by: Hans HOLMBERG <hans.xh.holmberg@stericsson.com> Reviewed-by: P.Hanumath PRASAD <hanumath.prasad@stericsson.com> Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2011-06-30u5500: add support for prcmu_read/write functionsMichael Brandt
Add functions prcmu_abb_read, prcmu_abb_write for u5500. ST-Ericsson ID: ER 345195 Change-Id: I754e74b18d0770932ee822759789219c1b691279 Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/25254 Reviewed-by: QATEST Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Vijaya Kumar K-1 <vijay.kilari@stericsson.com> Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com> Tested-by: Preetham-rao K <preetham.rao@stericsson.com>
2011-06-28u5500: changed mem_mali to mali.mali_memxvatnag
mem_mali= is a dummy parameter used to indicate that the region is occupied and should not be used for other things. Changed to mali.mali_mem=,active parameter, to override the default memory value used in config.h ST-Ericsson ID: ER343727 Change-Id: I1e265feeda65e38996f26ba6061e8c6173701c16 Signed-off-by: xvatnag <vathsala.nagaraju@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/25825 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: QATEST Tested-by: Divyanshu CHUCHRA <divyanshu.chuchra@stericsson.com> Reviewed-by: Satish Adiweppa HIPPARAGI <satish.hipparagi@stericsson.com>
2011-06-13u8500: Add Support to DBv2.2WenHai Fang
ST-Ericsson ID: CR337738 Change-Id: Ie0f7e2bb2f748d2cdd12703e77e0a1d18615d42c Signed-off-by: WenHai Fang <wenhai.h.fang@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/24580 Reviewed-by: QATEST Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-by: Jens WIKLANDER <jens.wiklander@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2011-05-23U5500: Add modem and itp loadingMikael Larsson
This implements modem and itp loading for u5500 using a cspsa fast parameter to decide which binaries to load. TOC entries "ITP" and/or "ITP_MODEM" are loaded in case of ITP boot. If cspsa is not present or wrong it will fall back to loading the kernel. ST-Ericsson ID: 279114 ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-10006 Change-Id: Ib264413401ad8fa8f399d841fef1f4e0031a2e49 Signed-off-by: Hans Holmberg <hans.xh.holmberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/22987 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com> Tested-by: Preetham-rao K <preetham.rao@stericsson.com> Reviewed-by: QATEST Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com>
2011-05-18u8500: Add commands to boot HATS or AndroidOlivier ARNAUD
Added commands: droid hats (type help <command> in U-Boot shell for help) ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson ID: 322254 Change-Id: I21884c96011787dd9b3496877305a0a1b1e5d20e Signed-off-by: Olivier ARNAUD <o.arnaud@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/21974 Reviewed-by: QATEST Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2011-05-18u5500:mmc:Add partition to support LTP tests on EMMCNaveen Kumar Gaddipati
Added partition to support the LTP tests on EMMC for U5500. ST-Ericsson ID: ER 339537 Change-Id: Idf6ead085b4ccc5e16e9a9072178f9eacededf4b Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/23006 Reviewed-by: P.Hanumath PRASAD <hanumath.prasad@stericsson.com> Reviewed-by: QATEST Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com> Tested-by: Preetham-rao K <preetham.rao@stericsson.com>
2011-05-06U8500: Add support for 6 Gbit and 8 Gbit memoryMagnus Persson
Adds memargs768 and memargs1024 as possible environment variables. Adds support to have different memory sizes on each CS. ST-Ericsson ID: AP334568, CR266299 Change-Id: I249001b52470b020f91e53e56ba4330c10a52b3b Signed-off-by: Magnus Persson <magnus.p.persson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/22485 Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com> Reviewed-by: Robert ROSENGREN <robert.rosengren@stericsson.com> Reviewed-by: QATEST Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2011-04-21U8500: Add support for 24/32 bpp framebufferDan Johansson
This patch adds support for RGB888 and RGBA8888 framebuffer in startup graphics. The format of the splash image has to be either indexed (8 bpp) or the same pixel format as the framebuffer. E.g. if the framebuffer is RGB888, the splash image must either be indexed or RGB888. U-boot will produce an error print if the formats don't match. ST-Ericsson ID: 334491 Change-Id: I267acf627a1c5a25700915b940264cb4bd0416b0 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/20705 Tested-by: Dan JOHANSSON <dan.johansson@stericsson.com> Reviewed-by: Torbjorn SVENSSON <torbjorn.x.svensson@stericsson.com> Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Reviewed-by: Sebastian RASMUSSEN <sebastian.rasmussen@stericsson.com>
2011-04-15db8500: Print db8500 minor versionMikael Larsson
Print db8500 minor version in cpuinfo printout for v1 & v2. Change-Id: I41850d7f957f2cd0c03e2866d80a81755368fcd7 Signed-off-by: Mikael Larsson <mikael.xt.larsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/20812 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Robert ROSENGREN <robert.rosengren@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: Peter NESSRUP <peter.nessrup@stericsson.com> Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com>
2011-04-14db8500: Fix ARM clock printoutMichael Brandt
The printout "ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 798.720 Mhz" make some people think that it displays the maximum possible frequency, which is not the case. This patch makes it more clear that this is the current frequency. Furthermore fix the unit to the SI notation MHz. Change-Id: Ie20af72a35743c1365d904b5dfea42b77c7d7e99 Signed-off-by: Michael Brandt <michael.brandt@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/20728 Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com> Reviewed-by: Wenhai FANG <wenhai.h.fang@stericsson.com> Reviewed-by: Robert ROSENGREN <robert.rosengren@stericsson.com> Reviewed-by: Mikael LARSSON1 <mikael.xt.larsson@stericsson.com>
2011-04-13U8500: Fix errors in MCDE L1 macrosDan Johansson
A new 16bpp DPI pixel format was introduced in DB8500v2. This has changed the field CDWIN in register MCDE_CRx1. Without this patch, 18 and 24bpp DPI formats will not work. ST-Ericsson ID: 332775 Change-Id: I99a6f55e5808f00b684231ec5a592f2958510204 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/20314 Tested-by: Dan JOHANSSON <dan.johansson@stericsson.com> Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Tested-by: Marcel TUNNISSEN <marcel.tuennissen@stericsson.com>
2011-04-13U8500:Add support for SSP interfaceMagnus TORSTENSSON
Add support for SSP interface in u-boot. ST-Ericsson ID: 332044 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Iafd0b69cab005edcbaab46728813959c6a26d4b5 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/20623 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Tested-by: Magnus TORSTENSSON <magnus.torstensson@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com>
2011-04-11Add U5500 board and platform supportHans Holmberg
Adding 5500 support, making the partition writing command common between 8500 and adding support in the 8500 MMC and GPIO drivers for 5500. ST-Ericsson ID: WP239164 ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-10009 Signed-off-by: Hans Holmberg <hans.xh.holmberg@stericsson.com> Change-Id: Icaa24cdd2363d5faa9ea0467ed849c64670b59fa Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/20028 Reviewed-by: Mikael LARSSON1 <mikael.xt.larsson@stericsson.com> Reviewed-by: Robert ROSENGREN <robert.rosengren@stericsson.com> Reviewed-by: Wenhai FANG <wenhai.h.fang@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com> Tested-by: Preetham-rao K <preetham.rao@stericsson.com>
2011-04-11[Android] Remove use of ALL_PREBUILTUlrika Sjoberg
Removes the use of ALL_PREBUILT. Use of this parameter will be forbidden in future releases of Android and it also prevents builds of Android SDK. Depends-On: I9b44253b4adf225da8ca449030c00f18fd19a637, Ic0c2d65a2dcb10198a07209c07282c8f52f985e5 ST-Ericsson ID: 328774, 321316 ST-Ericsson FOSS-OUT ID: NA Change-Id: I0e46b03201e0d99ae8320ed7673767a67eff4688 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/20084 Reviewed-by: Hans ODEBERG <hans.odeberg@stericsson.com> Reviewed-by: Markus GRAPE <markus.grape@stericsson.com> Tested-by: Ulrika SJOBERG <ulrika.sjoberg@stericsson.com> Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2011-04-04db8500: Fix I2CCLK InfoWenHai Fang
Fix i2cclk information ST-Ericsson ID: ER330102 Signed-off-by: WenHai Fang <wenhai.h.fang@stericsson.com> Change-Id: Id0f2f872f49a0a44cbfcd574a828bc0b281d618d Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/19867 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: QATOOLS
2011-03-31U8500: Save and restore PRCMU registers for crashdumpPer Fransson
ST-Ericsson ID: 329489 Change-Id: I237179f59453385d9b20fc3d83c91a8fea0a1979 Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/19395 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com>
2011-03-30mk_envimg: Build warning fixRobert Rosengren
Change-Id: I2efd0f92dde2081cf124ae4d22443fceeb616b16 Signed-off-by: Robert Rosengren <robert.rosengren@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/19361 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com> Reviewed-by: Rickard EVERTSSON <rickard.evertsson@stericsson.com>
2011-03-30U8500: Let kexec override crash_reboot variablePer Fransson
Even when configuring u-boot to not restart at a crash using the 'crash_reboot' environment variable there is a need to be able to override this from linux for testing purposes. ST-Ericsson ID: - Change-Id: I6608ce3ed9e7c7f502027d27e6c7757da1102b2c Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/19019 Reviewed-by: QATOOLS Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com>
2011-03-30u8500: Build warning fixesRobert Rosengren
Correcting build warnings in u8500 board folder. Additionally, adding extra CFLAGS as done in db8500 cpu folder. Change-Id: I34799ca1cde03f91c8ecc9f1dc2d198fcddeebf4 Signed-off-by: Robert Rosengren <robert.rosengren@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/19360 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com>
2011-03-28U8500: MMC: set base addr in board code and try alternativeMichael Brandt
Before this patch the base address of the SDI(MMC) controller is a compile time constant in the u8500 mmc driver. Some boards require probing and therefore a more dynamic way to configure the base address. This patch probes for the common case (PoPed eMMC) and if this fails tries on-board eMMC. Furthermore we get rid of the earlydrop test in the common u8500 MMC driver. Change-Id: I76390882c190b1c0c3ba6c7bf0c2632af0e12b19 Signed-off-by: Michael Brandt <michael.brandt@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/18715 Reviewed-by: QATOOLS Reviewed-by: Robert ROSENGREN <robert.rosengren@stericsson.com> Reviewed-by: Joakim AXELSSON <joakim.axelsson@stericsson.com>
2011-03-23u8500: MMC performance improvementsMikael Larsson
Enable high speed for external MMC. Enable bypass so MMC devices can be clocked at 50MHz. Change-Id: I741baff065f7083c8cb9d19a17b890c8d5b32b3c Signed-off-by: Mikael Larsson <mikael.xt.larsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/18427 Reviewed-by: Michael BRANDT <michael.brandt@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: Sebastian RASMUSSEN <sebastian.rasmussen@stericsson.com> Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-24 10:35:49 +0000