diff options
| author | Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com> | 2011-09-13 09:18:35 +0200 |
|---|---|---|
| committer | Robert Marklund <robert.marklund@stericsson.com> | 2011-10-05 12:57:52 +0200 |
| commit | 08ceafba86fb47d11ec9d787e13eb010c8569a2e (patch) | |
| tree | 9a0907adb2b7d69820569d24fb34fd03051df5e4 | |
| parent | 956007a13fb5f307f8451f51e55fc6828a6483b8 (diff) | |
mmc: core: Set correct bus mode before card init
Earlier all cards where initiated with bus mode set as OPENDRAIN, and then
later switched to PUSHPULL. According to the MMC/SD/SDIO specifications only
MMC cards use OPENDRAIN during init. For both SD and SDIO the bus mode shall
be PUSHPULL before attempting to init the card.
The consequence of having incorrect bus mode can lead to not being able
to detect the card. Therefore the default behavior have now been changed to
PUSHPULL in mmc_power_up, and will only be temporarily switched when trying
to attach or init a MMC card.
Change-Id: Ied79604d7b3b9fcaf13fbc5566f9cdd109b3cc29
Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30930
Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
| -rw-r--r-- | drivers/mmc/core/core.c | 8 | ||||
| -rw-r--r-- | drivers/mmc/core/mmc.c | 8 | ||||
| -rw-r--r-- | drivers/mmc/core/sd.c | 2 | ||||
| -rw-r--r-- | drivers/mmc/core/sdio.c | 2 |
4 files changed, 11 insertions, 9 deletions
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index e3d4c714b8c..7fc2a3f7938 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1097,13 +1097,11 @@ static void mmc_power_up(struct mmc_host *host) bit = fls(host->ocr_avail) - 1; host->ios.vdd = bit; - if (mmc_host_is_spi(host)) { + if (mmc_host_is_spi(host)) host->ios.chip_select = MMC_CS_HIGH; - host->ios.bus_mode = MMC_BUSMODE_PUSHPULL; - } else { + else host->ios.chip_select = MMC_CS_DONTCARE; - host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; - } + host->ios.bus_mode = MMC_BUSMODE_PUSHPULL; host->ios.power_mode = MMC_POWER_UP; host->ios.bus_width = MMC_BUS_WIDTH_1; host->ios.timing = MMC_TIMING_LEGACY; diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 59b5faa0072..e746b672246 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -548,6 +548,10 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, BUG_ON(!host); WARN_ON(!host->claimed); + /* Set correct bus mode for MMC before attempting init */ + if (!mmc_host_is_spi(host)) + mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN); + /* * Since we're changing the OCR value, we seem to * need to tell some cards to go back to the idle @@ -1017,6 +1021,10 @@ int mmc_attach_mmc(struct mmc_host *host) BUG_ON(!host); WARN_ON(!host->claimed); + /* Set correct bus mode for MMC before attempting attach */ + if (!mmc_host_is_spi(host)) + mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN); + err = mmc_send_op_cond(host, 0, &ocr); if (err) return err; diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index a7da23e8701..f7ef1c15816 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -904,8 +904,6 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, err = mmc_send_relative_addr(host, &card->rca); if (err) return err; - - mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL); } if (!oldcard) { diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index ac492ac974e..698d813cff3 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -408,8 +408,6 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, */ if (oldcard) oldcard->rca = card->rca; - - mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL); } /* |