aboutsummaryrefslogtreecommitdiff
path: root/drivers/spi
diff options
context:
space:
mode:
authorEric Miao <eric.y.miao@gmail.com>2010-03-16 16:48:01 +0800
committerEric Miao <eric.y.miao@gmail.com>2010-05-11 17:24:57 +0200
commitc9840daa70fbb8f6031fcd1f254a3da49a41ea7b (patch)
treedf95f94209b05cca7250b45cc694f15be51e5c50 /drivers/spi
parent793ffb9ed3179906760874689a99d4863d76914e (diff)
[ARM] pxa: correct SSCR0_SCR to support multiple SoCs
The previous definitions of SSCR0_SCR and SSCR0_SerClkDiv() prevented them being used simultaneously when supporting multiple PXA SoCs, esp. in drivers/spi/pxa2xx_spi.c, make them correct. The change from SSCR0_SerClkDiv(2) to SSCR0_SCR(2), will make the result a little bit different in pxa2xx_spi_probe(), however, since that's only used as a default initialization value, it's acceptable. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/pxa2xx_spi.c14
1 files changed, 7 insertions, 7 deletions
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 36828358a4d..35d4e5cdb63 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -1318,14 +1318,14 @@ static int setup(struct spi_device *spi)
/* NOTE: PXA25x_SSP _could_ use external clocking ... */
if (drv_data->ssp_type != PXA25x_SSP)
dev_dbg(&spi->dev, "%ld Hz actual, %s\n",
- clk_get_rate(ssp->clk)
- / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
- chip->enable_dma ? "DMA" : "PIO");
+ clk_get_rate(ssp->clk)
+ / (1 + ((chip->cr0 & SSCR0_SCR(0xfff)) >> 8)),
+ chip->enable_dma ? "DMA" : "PIO");
else
dev_dbg(&spi->dev, "%ld Hz actual, %s\n",
- clk_get_rate(ssp->clk) / 2
- / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
- chip->enable_dma ? "DMA" : "PIO");
+ clk_get_rate(ssp->clk) / 2
+ / (1 + ((chip->cr0 & SSCR0_SCR(0x0ff)) >> 8)),
+ chip->enable_dma ? "DMA" : "PIO");
if (spi->bits_per_word <= 8) {
chip->n_bytes = 1;
@@ -1558,7 +1558,7 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
write_SSCR1(SSCR1_RxTresh(RX_THRESH_DFLT) |
SSCR1_TxTresh(TX_THRESH_DFLT),
drv_data->ioaddr);
- write_SSCR0(SSCR0_SerClkDiv(2)
+ write_SSCR0(SSCR0_SCR(2)
| SSCR0_Motorola
| SSCR0_DataSize(8),
drv_data->ioaddr);