aboutsummaryrefslogtreecommitdiff
path: root/drivers/mmc/host
diff options
context:
space:
mode:
authorPhilip Langdale <philipl@overt.org>2007-03-16 19:39:00 -0700
committerPierre Ossman <drzeus@drzeus.cx>2007-05-01 14:14:50 +0200
commit55556da01284af8c2174b786b3eca8e11301b656 (patch)
tree579e0dbd68021daee1ff0c5b400d9cdf71c6faf8 /drivers/mmc/host
parent4be34c99a2f3aa90fa42e62c0918f07afb8a645b (diff)
MMC: Fix handling of low-voltage cards
Fix handling of low voltage MMC cards. The latest MMC and SD specs both agree that support for low-voltage operations is indicated by bit 7 in the OCR. The MMC spec states that the low voltage range is 1.65-1.95V while the SD spec leaves the actual voltage range undefined - meaning that there is still no such thing as a low voltage SD card. However, an old Sandisk spec implied that bits 7.0 represented voltages below 2.0V in 1V or 0.5V increments, and the code was accordingly written with that expectation. This confusion meant that host drivers attempting to support the typical low voltage (1.8V) would set the wrong bits in the host OCR mask (usually bits 5 and/or 6) resulting in the the low voltage mode never being used. This change corrects the low voltage range and adds sanity checks on the reserved bits (0-6) and for SD cards that claim to support low-voltage operations. Signed-off-by: Philip Langdale <philipl@overt.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Diffstat (limited to 'drivers/mmc/host')
-rw-r--r--drivers/mmc/host/sdhci.c5
1 files changed, 2 insertions, 3 deletions
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a57f6a3d48d..ff5bf73cdd2 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -659,8 +659,7 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
pwr = SDHCI_POWER_ON;
switch (1 << power) {
- case MMC_VDD_17_18:
- case MMC_VDD_18_19:
+ case MMC_VDD_165_195:
pwr |= SDHCI_POWER_180;
break;
case MMC_VDD_29_30:
@@ -1280,7 +1279,7 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
if (caps & SDHCI_CAN_VDD_300)
mmc->ocr_avail |= MMC_VDD_29_30|MMC_VDD_30_31;
if (caps & SDHCI_CAN_VDD_180)
- mmc->ocr_avail |= MMC_VDD_17_18|MMC_VDD_18_19;
+ mmc->ocr_avail |= MMC_VDD_165_195;
if (mmc->ocr_avail == 0) {
printk(KERN_ERR "%s: Hardware doesn't report any "