diff options
| author | Dan Johansson <dan.johansson@stericsson.com> | 2011-04-06 10:18:21 +0200 |
|---|---|---|
| committer | Jonas ABERG <jonas.aberg@stericsson.com> | 2011-05-05 08:15:53 +0200 |
| commit | 02e940233cc1aa34f43b6f302249a38290ee4116 (patch) | |
| tree | 8f318c2c8b91f26adb04598c8dfd09a501ba4803 /arch | |
| parent | 544dac5fc3592f3f07fc700cd78230ba3d30e5d2 (diff) | |
video: mcde: Add tripple buffer support
This patch adds tripple buffer support to the mcde
driver. Useful for video mode devices (e.g. HDMI)
where a missed v-sync leads to half frame rate
(the client has to wait for the next v-sync).
Tripple buffering solves this problem since there
are two back buffers the client can use.
Tripple buffering for HDMI is activated in
menuconfig by enabling:
System Type -> Display selection -> Enable tripple
buffer for HDMI display
ST-Ericsson ID: 335004
ST-Ericsson Linux next: Not tested, ER 282779
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ice1f936a8a00e2fbc8fdf7e8c6621c539efe0ac4
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/21839
Reviewed-by: QATOOLS
Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
Reviewed-by: QATEST
Reviewed-by: Marcel TUNNISSEN <marcel.tuennissen@stericsson.com>
Diffstat (limited to 'arch')
| -rwxr-xr-x | arch/arm/configs/u8500_defconfig | 1 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/Kconfig-arch | 6 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/board-mop500-mcde.c | 6 |
3 files changed, 13 insertions, 0 deletions
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 20204613d42..2b1bcd0cb25 100755 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -308,6 +308,7 @@ CONFIG_DISPLAY_GENERIC_DSI_PRIMARY_VSYNC=y # CONFIG_DISPLAY_GENERIC_DSI_SECONDARY is not set # CONFIG_DISPLAY_AB8500_TERTIARY is not set # CONFIG_DISPLAY_AV8100_TERTIARY is not set +# CONFIG_DISPLAY_AV8100_TRIPPLE_BUFFER is not set CONFIG_U8500_CPUFREQ=y CONFIG_U8500_CPUIDLE=y CONFIG_U8500_CPUIDLE_DEEPEST_STATE=4 diff --git a/arch/arm/mach-ux500/Kconfig-arch b/arch/arm/mach-ux500/Kconfig-arch index a845bc59757..04b90f366e3 100644 --- a/arch/arm/mach-ux500/Kconfig-arch +++ b/arch/arm/mach-ux500/Kconfig-arch @@ -149,6 +149,12 @@ config DISPLAY_AV8100_TERTIARY help Say yes here if HDMI output support +config DISPLAY_AV8100_TRIPPLE_BUFFER + bool "Enable tripple buffer for HDMI display" + depends on DISPLAY_AV8100_TERTIARY + help + Say yes to enable tripple buffer. You'll get double buffer otherwise + endmenu endif diff --git a/arch/arm/mach-ux500/board-mop500-mcde.c b/arch/arm/mach-ux500/board-mop500-mcde.c index 53e88150139..0139fb7034a 100644 --- a/arch/arm/mach-ux500/board-mop500-mcde.c +++ b/arch/arm/mach-ux500/board-mop500-mcde.c @@ -462,6 +462,7 @@ static int display_postregistered_callback(struct notifier_block *nb, virtual_width = width; virtual_height = height * 2; + #ifdef CONFIG_DISPLAY_GENERIC_DSI_PRIMARY_AUTO_SYNC if (ddev->id == PRIMARY_DISPLAY_ID) virtual_height = height; @@ -472,6 +473,11 @@ static int display_postregistered_callback(struct notifier_block *nb, virtual_height = height; #endif +#ifdef CONFIG_DISPLAY_AV8100_TRIPPLE_BUFFER + if (ddev->id == TERTIARY_DISPLAY_ID) + virtual_height = height * 3; +#endif + if (ddev->id == TERTIARY_DISPLAY_ID) { #ifdef CONFIG_MCDE_DISPLAY_HDMI_FB_AUTO_CREATE hdmi_fb_onoff(ddev, 1, 0, 0); |