summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-01-28Bluetooth: SPI: fix buf handling for HCI ACL packetsRicardo Salveti
Code was assuming that all the HCI messages were events, causing invalid data length when receiving HCL ACL packets. Change-Id: I8c1a07f46b6b62a04e242cf29ee1119f59d4bda6 Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
2017-01-28Bluetooth: A2DP: Stream End Point StructurePiyush Itankar
Added structure definition for stream end points and the a2dp stream. Change-Id: I6d0cc08611f5179397bea6200eb9244d7c1cc8d6 Signed-off-by: Piyush Itankar <piyush.t.itankar@intel.com>
2017-01-28Bluetooth: add storage flag for secure connection pairing LTKRoger Lendenmann
Change-Id: I521036a7887541f4cc078283fcb400bcdd5c41ef Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com>
2017-01-28Bluetooth: HFP HF: Handle +CIEV reponseSathish Narasimman
The +CIEV reponse received from the AG is handle and value is updated to the application. > ACL Data RX: Handle 256 flags 0x02 dlen 22 [hci0] 114.667753 Channel: 64 len 18 [PSM 3 mode 0] {chan 0} RFCOMM: Unnumbered Info with Header Check (UIH) (0xef) Address: 0x0b cr 1 dlci 0x02 Control: 0xef poll/final 0 Length: 14 FCS: 0x9a 0d 0a 2b 43 49 45 56 3a 20 32 2c 30 0d 0a 9a ..+CIEV: 2,0... Change-Id: I771cdb422d201293d356151fa33ec485083b2356 Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
2017-01-28Bluetooth: AVDTP: Add AVDTP Discover API PrototypeArun Jagadish
Added AVDTP Discover Request API Prototype. Change-Id: I661331634b64099e352efe12cacc9af5d4c7ce16 Signed-off-by: Arun Jagadish <arun.jagadish@intel.com>
2017-01-28Bluetooth: Doc: RFCOMM PICS fileJaganath Kanakkassery
All mandatory and most of optional PTS tests are passing. The only not supported optional tests are sending of Test, RPN and RLS which is not required at the moment. Change-Id: I5a92d30c0d44803baf6c705d86f2272e4e57fd18 Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
2017-01-28Bluetooth: L2CAP: Only set state for dynamic channelsLuiz Augusto von Dentz
Fixed channels don't really use channels state as they don't need connection setup. Change-Id: Ie8b1327db0269a45e9ccb6049f8dda87aa445fb5 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2017-01-28Bluetooth: A2DP: Adds accept state callback handlersPiyush Itankar
Adds state callback handler to allocate memory to AVDTP on an incoming connection. Also, abstracts searching of free session as a function call. Change-Id: Idee6b7a0507b0b75c0007717e351ca12de0cb5be Signed-off-by: Piyush Itankar <piyush.t.itankar@intel.com>
2017-01-28Bluetooth: RFCOMM: Implement MSC Flow ControlJaganath Kanakkassery
This is mainly for backward compatibility with 1.0b devices and for spec compliance. CFC is mandatory post 1.0b spec where in MSC FC shall not be used. FC bit in MSC is used to manage the flow control. If FC is 1 then the device is unable to accept frames. Implementation is done by reusing "tx_credit" as a binary semaphore wherein it will be blocked if MSC is recieved with FC bit 1 and unblocked if FC bit is 0. Once tx thread is scheduled then semaphore should be always available until all the buf in queue is sent. Change-Id: I91181668ec0f46ff0b02905dd97e4503fc1fa7a7 Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
2017-01-28Bluetooth: RFCOMM: Fix v24_signal in MSC responseJaganath Kanakkassery
v24_signal in MSC response should be the copy of it received in the command. Change-Id: I9723ba182bf5911025c7a57220cd70687ca785f3 Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
2017-01-28Bluetooth: AT: HFP HF: Handle unsolicited reponseSathish Narasimman
This implemnts the feature to handle the unsolicited response received from the AG. In the hfp_hf.c file the unsolicited_cb function process it. Change-Id: I3ca6c8d4a1522d02f7160e2fe4ae1598cd93ce7e Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
2017-01-27sensor: use SENSOR_CHAN_*_XYZ instead of SENSOR_CHAN_*_ANYBogdan Davidoaia
SENSOR_CHAN_*_ANY will be deprecated, so use the new SENSOR_CHAN_*_XYZ enum values. Change-Id: I91cf25864613a934feab65588969d10c52fd4fe6 Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
2017-01-27tests: context: Verify for out of bounds arraySergio Rodriguez
The for loop could exit with a out of bounds (variable j) value for the delayed_threads array, we verify for the variable value before operating on the array This issue was reported by Coverity Coverity-CID: 160078 Change-Id: I6aa1cc325cc363be48cd72b2a58d0a55ec3854bc Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
2017-01-27sensor: add SENSOR_CHAN_*_XYZ enum valuesBogdan Davidoaia
Add SENSOR_CHAN_*_XYZ enum values to be used instead of SENSOR_CHAN_*_ANY, because the new naming takes into account that they are used to fetch all the 3 axes for a channel (X, Y and Z) and not just any number of them. Also deprecate old SENSOR_CHAN_*_ANY enum values. Change-Id: I59e9901c1f8879d084bdb7c95583c2b28aa1e025 Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
2017-01-27ext: hal: nordic: cleanup Kbuild for nowKumar Gala
Since nothing is currently using the nordic HAL lets just stick a dummy build line. Once something uses it, it can add what's needed and pull in the code that is desired. Change-Id: Id70bb6a88c6f1bbb7f33421cd0c14aafb83597b5 Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-01-27Merge net branch into masterJukka Rissanen
Main changes: - TCP fixes - BT IPSP fixes - Changing networking code and samples to use printk() - CoAP over DTLS server and client samples - Telnet console support - IEEE 802.15.4 driver for MCR20A ---------------------------------------------------------------- Andrei Emeltchenko (8): wpan_serial: Queue only full packet to RX queue drivers: cc2520: Remove unused TI_CC2520 Kconfig option net: Remove CONFIG_NET_IPV6_NO_ND config option net: tests: Correct project file for route tests net: Make NET_IPV6_ND configurable option net: Make NET_IPV6_DAD depends on NET_IPV6_ND net: Remove unused CONFIG_NET_IPV6_NO_DAD option net: Fix leaving NET_MAX_6LO_CONTEXTS set when 6lowpan deselected Andy Ross (2): net: tcp: Make the connect callback on success, not transmission net: tcp: Issue connection callback on RST Johann F (2): ext: mcux: add MCR20Overwrites.h samples: ieee802154: add MCR20A Johann Fischer (3): drivers: ieee802154: add MCR20A driver boards: frdm_k64f: add pinmux settings for MCR20A samples: net: add configs for MCR20A Jukka Rissanen (2): net: tcp: Only return -ETIMEDOUT if timeout>0 in connect net: echo-client: Add TCP support Luiz Augusto von Dentz (3): net: bt: Fix not checking channel state net: bt: Fix warning when compiling without debug net: bt: Fix not checking for valid ll addresses Malcolm Prinn (1): net: iface: Fix typo in net_if_down Paul Sokolovsky (1): net: Set default NET_NBUF_RX_COUNT to 4. Ravi kumar Veeramally (12): samples: net: Add DHCPv4 sample application README file net: tests: Fix invalid config option in 6lo tests net: Fix 80 line character limit net: Use lighter printk() instead of printf() net: samples: Use lighter printk() instead of printf() net: tests: Use lighter printk() instead of printf() net: samples: Fix config option doc: net: Fix networking documentation net: ip: Check error conditions and return false net: 6lo: Verify src and dst link layer addresses net: dhcpv4: Fix tiny style issues net: 6lo: Fix tiny style issues Sergio Rodriguez (2): samples/coaps_server CoAP over DTLS server example app using mbedTLS samples/coaps_client CoAP over DTLS client example app using mbedTLS Tomasz Bursztyka (18): drivers/console: Removing non existing Kconfig source misc/printk: Add a function to get the current hook function. net: ip: Add a useful macro to staticaly initialize a struct in_addr drivers/console: Add a basic telnet console samples/net: Add telnet console support on echo_server with qemu shell: Fix tiny style issues drivers/uart_console: Fix tiny style issues drivers/console: Making console input generic console/shell: Switch to generic console input shell: Make the command queue size configurable via Kconfig drivers/console/telnet: Provide minimal input handling. shell: If enabled, let's register telnet console as an input drivers/console/telnet: Add ground support for telnet commands net/ieee802154: Modify radio TX function signature net/ieee802154: Raise an error when data frame cannot be created net/6lo: Switch to NET_ERR/NET_WARN when relevant. net/shell: Fix format string drivers/console/telnet: Select TCP when telnet is selected Vinicius Costa Gomes (2): samples/zoap: Update zoap samples documentation samples/zoap_server: Also listen on the unicast address boards/arm/frdm_k64f/pinmux.c | 7 + .../networking/ip-stack-architecture.rst | 12 +- doc/subsystems/networking/networking.rst | 3 +- drivers/console/Kconfig | 10 +- drivers/console/Kconfig.telnet | 124 ++ drivers/console/Makefile | 1 + drivers/console/telnet_console.c | 558 ++++++++ drivers/console/telnet_protocol.h | 125 ++ drivers/console/uart_console.c | 17 +- drivers/ieee802154/Kconfig | 125 +- drivers/ieee802154/Makefile | 2 + drivers/ieee802154/ieee802154_cc2520.c | 32 +- drivers/ieee802154/ieee802154_mcr20a.c | 1462 ++++++++++++++++++++ drivers/ieee802154/ieee802154_mcr20a.h | 184 +++ drivers/ieee802154/ieee802154_mcr20a_regs.h | 590 ++++++++ drivers/ieee802154/ieee802154_uart_pipe.c | 10 +- ext/hal/nxp/mcux/Makefile | 4 + ext/hal/nxp/mcux/README | 8 + .../nxp/mcux/components/mcr20a/MCR20Overwrites.h | 309 +++++ ext/lib/crypto/mbedtls/configs/config-coap.h | 102 ++ include/drivers/console/console.h | 49 + include/drivers/console/telnet_console.h | 37 + include/drivers/console/uart_console.h | 6 - include/net/ieee802154_radio.h | 6 +- include/net/net_context.h | 37 +- include/net/net_ip.h | 5 + misc/printk.c | 13 + samples/net/coaps_client/Makefile | 14 + samples/net/coaps_client/README.rst | 53 + samples/net/coaps_client/prj_qemu_x86.conf | 27 + samples/net/coaps_client/src/Makefile | 7 + samples/net/coaps_client/src/coaps_client.c | 447 ++++++ samples/net/coaps_client/src/udp.c | 202 +++ samples/net/coaps_client/src/udp.h | 23 + samples/net/coaps_client/src/udp_cfg.h | 21 + samples/net/coaps_client/testcase.ini | 4 + samples/net/coaps_server/Makefile | 14 + samples/net/coaps_server/README.rst | 76 + samples/net/coaps_server/prj_qemu_x86.conf | 30 + samples/net/coaps_server/src/Makefile | 7 + samples/net/coaps_server/src/coaps_server.c | 685 +++++++++ samples/net/coaps_server/src/udp.c | 186 +++ samples/net/coaps_server/src/udp.h | 24 + samples/net/coaps_server/src/udp_cfg.h | 20 + samples/net/coaps_server/testcase.ini | 4 + samples/net/dhcpv4_client/README.rst | 161 +++ samples/net/dns_client/prj_qemu_x86.conf | 2 +- samples/net/echo_client/prj_frdm_k64f_mcr20a.conf | 48 + samples/net/echo_client/src/Makefile | 4 + samples/net/echo_client/src/echo-client.c | 516 +++++-- samples/net/echo_server/prj_cc2520.conf | 2 - samples/net/echo_server/prj_frdm_k64f_mcr20a.conf | 46 + samples/net/echo_server/prj_slip.conf | 12 +- samples/net/echo_server/src/echo-server.c | 5 +- samples/net/ieee802154/hw/prj.conf | 2 - samples/net/ieee802154/hw/prj_mcr20a.conf | 45 + samples/net/ieee802154/hw/src/ieee802154_test.c | 13 +- samples/net/ieee802154/qemu/prj.conf | 2 - samples/net/leds_demo/src/leds-demo.c | 5 +- samples/net/mbedtls_dtlsclient/prj_qemu_x86.conf | 2 +- samples/net/mbedtls_dtlsserver/prj_qemu_x86.conf | 2 +- samples/net/wpan_serial/src/main.c | 36 +- samples/net/wpanusb/src/wpanusb.c | 18 +- samples/net/zoap_client/README.rst | 46 + samples/net/zoap_client/README.txt | 54 - samples/net/zoap_client/src/zoap-client.c | 34 +- samples/net/zoap_server/README.rst | 40 + samples/net/zoap_server/README.txt | 51 - samples/net/zoap_server/src/zoap-server.c | 33 +- subsys/net/ip/6lo.c | 77 +- subsys/net/ip/Kconfig | 3 +- subsys/net/ip/Kconfig.ipv6 | 7 +- subsys/net/ip/connection.c | 20 +- subsys/net/ip/dhcpv4.c | 41 +- subsys/net/ip/icmpv4.c | 8 +- subsys/net/ip/icmpv6.c | 8 +- subsys/net/ip/ipv6.c | 13 +- subsys/net/ip/l2/arp.c | 2 +- subsys/net/ip/l2/bluetooth.c | 27 +- subsys/net/ip/l2/ethernet.c | 2 +- subsys/net/ip/l2/ieee802154/ieee802154.c | 18 +- subsys/net/ip/l2/ieee802154/ieee802154_frame.c | 1 + .../net/ip/l2/ieee802154/ieee802154_radio_aloha.c | 7 +- .../ip/l2/ieee802154/ieee802154_radio_csma_ca.c | 7 +- .../net/ip/l2/ieee802154/ieee802154_radio_utils.h | 7 +- subsys/net/ip/net_context.c | 23 +- subsys/net/ip/net_core.c | 6 +- subsys/net/ip/net_if.c | 2 +- subsys/net/ip/net_private.h | 15 +- subsys/net/ip/net_shell.c | 4 +- subsys/net/ip/route.c | 4 +- subsys/net/ip/rpl-of0.c | 2 +- subsys/net/ip/rpl.c | 13 +- subsys/shell/Kconfig | 11 +- subsys/shell/shell.c | 41 +- tests/net/6lo/prj.conf | 2 +- tests/net/arp/src/main.c | 12 +- tests/net/ieee802154/l2/prj.conf | 2 - .../net/ieee802154/l2/src/ieee802154_fake_driver.c | 4 +- tests/net/ip-addr/src/main.c | 11 +- tests/net/nbuf/src/main.c | 11 +- tests/net/route/prj.conf | 11 - tests/net/tcp/prj.conf | 1 - tests/net/udp/prj.conf | 1 - 104 files changed, 6726 insertions(+), 559 deletions(-) create mode 100644 drivers/console/Kconfig.telnet create mode 100644 drivers/console/telnet_console.c create mode 100644 drivers/console/telnet_protocol.h create mode 100644 drivers/ieee802154/ieee802154_mcr20a.c create mode 100644 drivers/ieee802154/ieee802154_mcr20a.h create mode 100644 drivers/ieee802154/ieee802154_mcr20a_regs.h create mode 100644 ext/hal/nxp/mcux/components/mcr20a/MCR20Overwrites.h create mode 100644 ext/lib/crypto/mbedtls/configs/config-coap.h create mode 100644 include/drivers/console/console.h create mode 100644 include/drivers/console/telnet_console.h create mode 100644 samples/net/coaps_client/Makefile create mode 100644 samples/net/coaps_client/README.rst create mode 100644 samples/net/coaps_client/prj_qemu_x86.conf create mode 100644 samples/net/coaps_client/src/Makefile create mode 100644 samples/net/coaps_client/src/coaps_client.c create mode 100644 samples/net/coaps_client/src/udp.c create mode 100644 samples/net/coaps_client/src/udp.h create mode 100644 samples/net/coaps_client/src/udp_cfg.h create mode 100644 samples/net/coaps_client/testcase.ini create mode 100644 samples/net/coaps_server/Makefile create mode 100644 samples/net/coaps_server/README.rst create mode 100644 samples/net/coaps_server/prj_qemu_x86.conf create mode 100644 samples/net/coaps_server/src/Makefile create mode 100644 samples/net/coaps_server/src/coaps_server.c create mode 100644 samples/net/coaps_server/src/udp.c create mode 100644 samples/net/coaps_server/src/udp.h create mode 100644 samples/net/coaps_server/src/udp_cfg.h create mode 100644 samples/net/coaps_server/testcase.ini create mode 100644 samples/net/dhcpv4_client/README.rst create mode 100644 samples/net/echo_client/prj_frdm_k64f_mcr20a.conf create mode 100644 samples/net/echo_server/prj_frdm_k64f_mcr20a.conf create mode 100644 samples/net/ieee802154/hw/prj_mcr20a.conf create mode 100644 samples/net/zoap_client/README.rst delete mode 100644 samples/net/zoap_client/README.txt create mode 100644 samples/net/zoap_server/README.rst delete mode 100644 samples/net/zoap_server/README.txt Change-Id: I6caced9d0ae41d2019fb30434141260471e2538e Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2017-01-27ext: Integrate Nordic SDK HAL files into ZephyrCarles Cufi
Nordic Semiconductor's Software Development Kit's HAL layer provides a set of low-level header and sourcefiles that give access to the different hardware peripherals of Nordic ICs. This patch includes the new files in the build and refactors the Kconfig and Kbuild files in ext/hal/nordic to acommodate for the presence of the new HAL layer. Change-Id: Ie8e1a4c9fcc7e9058a9d16a2692ef1789603aa53 Signed-off-by: Wojciech Bober <wojciech.bober@nordicsemi.no> Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2017-01-27ext: Import Nordic SDK HAL filesCarles Cufi
Nordic Semiconductor's Software Development Kit's HAL layer provides a set of low-level header and sourcefiles that give access to the different hardware peripherals of Nordic ICs. Origin: Nordic SDK 12.2.0 (components/drivers_nrf/hal) URL: http://developer.nordicsemi.com/nRF5_SDK/ License: 3-clause BSD Maintained-by: External Change-Id: Iafb5816af89461c8e88ba3b47e790cb6141d10fe Signed-off-by: Wojciech Bober <wojciech.bober@nordicsemi.no> Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2017-01-27net: echo-client: Add TCP supportJukka Rissanen
This commit enables echo-client application to start to send data over TCP connection. Change-Id: I9acdaae7f1e8411952c30caeedc9c1fb07cdd448 Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2017-01-27drivers/console/telnet: Select TCP when telnet is selectedTomasz Bursztyka
Thus users won't have to first enable network stack and then telnet. Change-Id: I30cb2b9debee3feaf804f9a70f9d3f90758f5f17 Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-01-27net: Fix leaving NET_MAX_6LO_CONTEXTS set when 6lowpan deselectedAndrei Emeltchenko
Make NET_MAX_6LO_CONTEXTS depends on NET_6LO_CONTEXT, otherwise at the moment even deselecting 6lowpan leaves NET_MAX_6LO_CONTEXTS set. Change-Id: Iaa34d324005817be05190e203f6899ab89f89e5d Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2017-01-27net/shell: Fix format stringTomasz Bursztyka
Change-Id: Id335466e68add23a5786257681dc1b4d5bf6846d Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-01-27net: Remove unused CONFIG_NET_IPV6_NO_DAD optionAndrei Emeltchenko
Option CONFIG_NET_IPV6_NO_DAD is not used anymore, clean project configuration files. Change-Id: I368e076d2f79f1d4bc86edee11ff5befe37362c8 Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2017-01-27net: Make NET_IPV6_DAD depends on NET_IPV6_NDAndrei Emeltchenko
Making NET_IPV6_DAD depends on NET_IPV6_ND instead of default fixes issue when deselecting NET_IPV6_ND, NET_IPV6_DAD is still selected in this case. Change-Id: I633b1a71fb5fdcd7ecc75be80a737d8bda142b2e Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2017-01-27net: Make NET_IPV6_ND configurable optionAndrei Emeltchenko
NET_IPV6_ND is always selected by NET_ROUTE which is always selected for NET_IPV6. Change-Id: I316838033cccd205b24add6626521bbab5a68715 Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2017-01-27net: tests: Correct project file for route testsAndrei Emeltchenko
Routing tests uses ND so do not disable it, otherwise tests might fail if disabling ND supported. Change-Id: Ie020de8dac4447931d1067f1ed781a72cf05e8af Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2017-01-27net: 6lo: Fix tiny style issuesRavi kumar Veeramally
Change-Id: I5cf65f4d428f17290642ce94d5e70d233f512213 Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
2017-01-27net: dhcpv4: Fix tiny style issuesRavi kumar Veeramally
Change-Id: I12e6763627d85912496e8c702cd97bf90ac4f741 Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
2017-01-27net/6lo: Switch to NET_ERR/NET_WARN when relevant.Tomasz Bursztyka
This permits to catch issues without the need to enable debug level. Change-Id: Ic3c66a84be587e955d532cc321161a3ae7b5d69d Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-01-27net/ieee802154: Raise an error when data frame cannot be createdTomasz Bursztyka
Change-Id: I7405c4b3de194c09f7d8d8e1bb54602b6dba304b Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-01-27net/ieee802154: Modify radio TX function signatureTomasz Bursztyka
The cause for this change is TCP. Until now, the radio strategy driver (ALOHA or CSMA) was providing the actual nbuf, and not the buffer fragment, counting on the fact that the loop was using net_buf_frag_del() which made so, iteration after iteration, buffer framgent to be always buf->frags. The problem with this logic is loosing the fragments that might be still referenced by TCP, in case the whole buffer did not make it so TCP can retry later and so on. Instead, TX now takes the nbuf and the actual frag to send. It could have been working with just a pointer on the data, and the whole length of the frame. But it has been avoided due to possible future devices, that will be smarter and run CSMA directly in the hw, thus it will require to access the whole buffer list through the nbuf. Change-Id: I8d77b1e13b648c0ec3645cb2d55d1910d00381ea Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-01-27net: Remove CONFIG_NET_IPV6_NO_ND config optionAndrei Emeltchenko
The option is no longer used so it can be removed. Use CONFIG_NET_IPV6_ND option instead. Change-Id: Ibaa3d3deb52b8b176e85f8b9e1d8c80c1026aea1 Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2017-01-27samples/coaps_client CoAP over DTLS client example app using mbedTLSSergio Rodriguez
Jira: ZEP-941 Change-Id: Ia49087b75b33bcedb1b77b6a062368281c41e479 Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
2017-01-27samples/coaps_server CoAP over DTLS server example app using mbedTLSSergio Rodriguez
Jira: ZEP-942 Change-Id: I810fccfed912d9de62073a9a4e943b7924aa6392 Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
2017-01-27drivers/console/telnet: Add ground support for telnet commandsTomasz Bursztyka
This is the skeleton for such support. Let's see if this will be needed and thus extended in the future. For now, it's disabled by default, not advised to be enabled. It supports AYT, AO and DO/SUPR_GA. This is very limited and only there to show how it could be handled. Change-Id: I736bfa23145e9b727af08db682ab001f494f8c8d Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-01-27shell: If enabled, let's register telnet console as an inputTomasz Bursztyka
Change-Id: I476ca0f7914b02d2523a341560023c7e334d8b1b Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-01-27drivers/console/telnet: Provide minimal input handling.Tomasz Bursztyka
Telnet "Interpret As Command" (IAC) code is ignored. Change-Id: I882397389d77b8adfcbce62fbd9654c0b0412ae3 Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-01-27shell: Make the command queue size configurable via KconfigTomasz Bursztyka
Change-Id: I80551c76903118bfe831776c87135e89d32552da Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-01-27console/shell: Switch to generic console inputTomasz Bursztyka
Let's use the generic console input type now. This will be useful for other console input drivers such as telnet. Change-Id: I787a1e9d86481d5f8c4803453726d9042a89dea4 Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-01-27drivers/console: Making console input genericTomasz Bursztyka
Input line length can be modified via Kconfig. Change-Id: I3423fce9814e04b11d11e5d391f85fe1efbe8d17 Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-01-27drivers/uart_console: Fix tiny style issuesTomasz Bursztyka
Basically missing {} on if statements. Taking the opportunity to remove a useless switch. Change-Id: Ic6b3951dfc257cb46d858ebcd12bdf1b4e7ff997 Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-01-27shell: Fix tiny style issuesTomasz Bursztyka
- identation alignment - 80 chars length limit Change-Id: Ieae83e0daa2c7ee7aff32a053db5692094488df7 Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-01-27samples/net: Add telnet console support on echo_server with qemuTomasz Bursztyka
This is meant to test telnet console easily, as echo_server already enables net shell module etc. Change-Id: I045340ae5d6e179ea5ce1416cd7d67c6956bd973 Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-01-27drivers/console: Add a basic telnet consoleTomasz Bursztyka
Telnet is started as an application, as it requires the net stack to be ready. It will listen to any IP address on both protocols (IPv4, IPv6), depending of course on which one is enabled. Current behavior is very basic, as it does not handle any telnet command (IAC). These will be silently ignored. Jira: ZEP-1601 Change-Id: Id50656f23e6347bbbc893416953f1ba7116ef87d Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-01-27net: ip: Add a useful macro to staticaly initialize a struct in_addrTomasz Bursztyka
As for IN6ADDR_ANY_INIT, let's have an INADDR_ANY_INIT. Change-Id: I07c9ec6d2bb20d3a228edaac2e3380942feac5fd Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-01-27misc/printk: Add a function to get the current hook function.Tomasz Bursztyka
This can be necessary at run-time if a switch of one console to another has to be made, with the possibility to reinstall the former hook at some point. Change-Id: I60efc74b1c94953bdc2585b99cc4816c46715372 Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-01-27drivers/console: Removing non existing Kconfig sourceTomasz Bursztyka
Change-Id: I89fdc6f702f3ea39822c6fbf6fce93e3eb77261c Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-01-27net: bt: Fix not checking for valid ll addressesLuiz Augusto von Dentz
ll addresses need to be set properly before sending as the stack is not checking if they are NULL. Change-Id: Ia4e96240f18b53b0e32e21649a8b571c94260731 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2017-01-27net: 6lo: Verify src and dst link layer addressesRavi kumar Veeramally
If src and dst link layer addresses are not then 6lo fails to compress the packet. Change-Id: Ie2692def49f8a101194e3669dbaec00b557e14ce Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
2017-01-27net: ip: Check error conditions and return falseRavi kumar Veeramally
Check if input parameters are valid or not. It might lead to crash NULL address input. Change-Id: Ib446ab0467268bca01f478cca3ece868c7c9e49b Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-24 10:12:36 +0000