summaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2014-05-19Merge remote-tracking branch 'remotes/kraxel/tags/pull-input-8' into stagingPeter Maydell
Input code update: - add keycode mapping helpers to core. - start switching devices to new input api. - misc bugfixes. # gpg: Signature made Fri 16 May 2014 07:43:45 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-input-8: input: sparc32 kbd: claim en-us layout input: sparc32 kbd: fix some key mappings input: remove sparc keymap hack input: switch sparc32 kbd to new input api input: switch ps/2 mouse to new input api input: switch ps/2 kbd to new input api input: use KeyValue directly in sendkey monitor command input: add qemu_input_handler_deactivate input: key mapping helpers ps2: set ps/2 output buffer size as the same as kernel Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-19Merge remote-tracking branch 'remotes/bonzini/scsi-next' into stagingPeter Maydell
* remotes/bonzini/scsi-next: [PATCH] block/iscsi: bump year in copyright notice block/iscsi: allow cluster_size of 4K and greater block/iscsi: clarify the meaning of ISCSI_CHECKALLOC_THRES block/iscsi: speed up read for unallocated sectors block/iscsi: allow fall back to WRITE SAME without UNMAP MAINTAINERS: mark megasas as maintained megasas: Add MSI support megasas: Enable MSI-X support megasas: Implement LD_LIST_QUERY scsi: Improve error messages more scsi-disk: Improve error messager if can't get version number Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-16input: sparc32 kbd: claim en-us layoutGerd Hoffmann
Reported-by: Olivier Danet <odanet@caramail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-16input: sparc32 kbd: fix some key mappingsGerd Hoffmann
Reported-by: Olivier Danet <odanet@caramail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-16input: switch sparc32 kbd to new input apiGerd Hoffmann
Nasty 0xe0 logic is gone. We map through QKeyCode now, giving us a nice, readable mapping table. Quick smoke test in OpenFirmware looks ok. Careful check from arch maintainers would be very nice, especially on the capslock and numlock logic. I'm not fully sure whenever I got it translated correctly and also what it is supposed to do in the first place ... Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-16input: switch ps/2 mouse to new input apiGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-16input: switch ps/2 kbd to new input apiGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-16ps2: set ps/2 output buffer size as the same as kernelGonglei
According to the PS/2 Mouse/Keyboard Protocol, the keyboard outupt buffer size is 16 bytes. And the PS2_QUEUE_SIZE 256 was introduced in Qemu from the very beginning. When I started a redhat5.6 32bit guest, meanwhile tapped the keyboard as quickly as possible, the screen would show me "i8042.c: No controller found". As a result, I couldn't use the keyboard in the VNC client. Previous discussion about the issue in maillist: http://thread.gmane.org/gmane.comp.emulators.qemu/43294/focus=47180 This patch has been tested on redhat5.6 32-bit/suse11sp3 64-bit guests. More easy meathod to reproduce: 1.boot a guest with libvirt. 2.connect to VNC client. 3.as you see the BIOS, bootloader, Linux booting, run the follow simply shell script: for((i=0;i<10000000;i++)) do virsh send-key redhat5.6 KEY_A; done Actual results: dmesg show "i8042.c: No controller found." And the keyboard is out of work. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-15Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio update looks like a quiet week minor bugfix in virtio by myself Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 13 May 2014 14:37:23 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: virtio: allow mapping up to max queue size Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-15Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20140515' ↵Peter Maydell
into staging migration/next for 20140515 # gpg: Signature made Thu 15 May 2014 02:32:25 BST using RSA key ID 5872D723 # gpg: Can't check signature: public key not found * remotes/juanquintela/tags/migration/20140515: usb: fix up post load checks migration: show average throughput when migration finishes savevm: Remove all the unneeded version_minimum_id_old (rest) savevm: Remove all the unneeded version_minimum_id_old (usb) Split ram_save_block arch_init: Simplify code for load_xbzrle() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-15Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20140513' into staging target-arm queue: * update libvixl to 1.4 * remove version_minimum_id_old from ARM devices * stellaris_enet tx/rx/migration overhaul * various minor fixes for coverity issues # gpg: Signature made Tue 13 May 2014 16:25:12 BST using RSA key ID 14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" * remotes/pmaydell/tags/pull-target-arm-20140513: hw/arm/omap_gpmc: Avoid buffer overrun filling prefetch FIFO hw/arm/stellaris: Correct handling of GPTM TAR register hw/timer/exynos4210_mct: Avoid overflow in exynos4210_ltick_recalc_count hw/dma/omap_dma: Add (uint32_t) casts when shifting uint16_t by 16 hw/arm/omap1: Avoid unintended sign extension writing omap_rtc YEARS_REG hw/net/cadence_gem: Remove dead code hw/intc/allwinner-a10-pic: Add missing 'break' target-arm/helper.c: Don't flush the TLB if SCTLR is rewritten unchanged hw/net/stellaris_enet: Convert to vmstate hw/net/stellaris_enet: Get rid of rx_fifo pointer hw/net/stellaris_enet: Fix debug format strings hw/net/stellaris_enet: Correctly implement the TR and THR registers hw/net/stellaris_enet: Rewrite tx fifo handling code hw/net/stellaris_enet: Correct handling of packet padding hw/net/stellaris_enet: Restructure tx_fifo code to avoid buffer overrun savevm: Remove all the unneeded version_minimum_id_old (arm) disas/libvixl: Update to libvixl 1.4 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-15Merge remote-tracking branch 'remotes/kvm/uq/master' into stagingPeter Maydell
* remotes/kvm/uq/master: pc: port 92 reset requires a low->high transition cpu: make CPU_INTERRUPT_RESET available on all targets apic: do not accept SIPI on the bootstrap processor target-i386: preserve FPU and MSR state on INIT target-i386: fix set of registers zeroed on reset kvm: forward INIT signals coming from the chipset kvm: reset state from the CPU's reset method target-i386: the x86 CPL is stored in CS.selector - auto update hflags accordingly. target-i386: set eflags prior to calling cpu_x86_load_seg_cache() in seg_helper.c target-i386: set eflags and cr0 prior to calling cpu_x86_load_seg_cache() in smm_helper.c target-i386: set eflags prior to calling svm_load_seg_cache() in svm_helper.c pci-assign: limit # of msix vectors pci-assign: Fix a bug when map MSI-X table memory failed kvm: make one_reg helpers available for everyone target-i386: Remove unused data from local array Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-14usb: fix up post load checksMichael S. Tsirkin
Correct post load checks: 1. dev->setup_len == sizeof(dev->data_buf) seems fine, no need to fail migration 2. When state is DATA, passing index > len will cause memcpy with negative length, resulting in heap overflow First of the issues was reported by dgilbert. Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-05-14savevm: Remove all the unneeded version_minimum_id_old (rest)Juan Quintela
After previous Peter patch, they are redundant. This way we don't assign them except when needed. Once there, there were lots of case where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (appart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-14savevm: Remove all the unneeded version_minimum_id_old (usb)Juan Quintela
After previous Peter patch, they are redundant. This way we don't assign them except when needed. Once there, there were lots of case where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (appart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-13hw/arm/omap_gpmc: Avoid buffer overrun filling prefetch FIFOPeter Maydell
In fill_prefetch_fifo(), if the device we are reading from is 16 bit, then we must not try to transfer an odd number of bytes into the FIFO. This could otherwise have resulted in our overrunning the prefetch.fifo array by one byte. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-05-13hw/arm/stellaris: Correct handling of GPTM TAR registerPeter Maydell
We don't implement very much of the GPTM TAR register, and what we do is wrong. The "are we in RT mode?" field is in s->config, not s->control. Correct this, use LOG_UNIMP rather than hw_error() for the cases we don't support, and avoid an unlabelled fallthrough that makes Coverity complain. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-05-13hw/timer/exynos4210_mct: Avoid overflow in exynos4210_ltick_recalc_countPeter Maydell
Add casts to avoid potentially overflowing the multiplications of 32 bit quantities in exynos4210_ltick_recalc_count(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-05-13hw/dma/omap_dma: Add (uint32_t) casts when shifting uint16_t by 16Peter Maydell
Add missing (uint32_t) casts in cases where we're trying to put a uint16_t value into the top half of a 32-bit field. These were already present in some but not all places. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-05-13hw/arm/omap1: Avoid unintended sign extension writing omap_rtc YEARS_REGPeter Maydell
When writing to the YEARS_REG register, if the year value is 99 then the multiplication by 31536000 will overflow into the sign bit of a 32 bit value and then be erroneously sign-extended if time_t is 64 bits. Add a cast to avoid this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-05-13hw/net/cadence_gem: Remove dead codePeter Maydell
Commit 191946c moved the code to handle padding to minimum length from after the handling of the CRC to before it. This means that the CRC code doesn't need to cope with the possibility that the size is less than 60; remove this dead code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-05-13hw/intc/allwinner-a10-pic: Add missing 'break'Peter Maydell
Add missing 'break' after handling of AW_A10_PIC_BASE_ADDR write. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-05-13hw/net/stellaris_enet: Convert to vmstatePeter Maydell
Convert this device to use vmstate for its save/load, including providing a post_load function that sanitizes inbound data to avoid possible buffer overflows if it is malicious. The sanitizing fixes CVE-2013-4532 (though nobody should be relying on the security properties of most of the unmaintained ARM board models anyway, and migration doesn't actually work on this board due to issues in other device models). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-13hw/net/stellaris_enet: Get rid of rx_fifo pointerPeter Maydell
The rx_fifo pointer is awkward to migrate, and is actually redundant since it is always possible to determine it from the current rx[].len/.data and rx_fifo_len. Remove both rx_fifo and rx_fifo_len from the state, replacing them with a simple rx_fifo_offset which points at the current location in the RX fifo. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2014-05-13hw/net/stellaris_enet: Fix debug format stringsPeter Maydell
Fix various debug format strings which were incorrect for the data type, so that building with debug enabled is possible. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2014-05-13hw/net/stellaris_enet: Correctly implement the TR and THR registersPeter Maydell
Packet transmission for the stellaris ethernet controller can be triggered in one of two ways: * by setting a threshold value in the THR register; when the FIFO fill level reaches the threshold, the h/w starts transmitting. Software has to finish filling the FIFO before the transmit process completes to avoid a (silent) underrun * by software writing to the TR register to explicitly trigger transmission Since QEMU transmits packets instantaneously (from the guest's point of view), implement "transmit based on threshold" with our existing mechanism of "transmit as soon as we have the whole packet", with the additional wrinkle that we don't transmit if the packet size is below the specified threshold, and implement "transmit by specific request" properly. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2014-05-13hw/net/stellaris_enet: Rewrite tx fifo handling codePeter Maydell
The datasheet is clear that the frame length written to the DATA register is actually stored in the TX FIFO; this means we don't need to keep both tx_frame_len and tx_fifo_len state separately. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2014-05-13hw/net/stellaris_enet: Correct handling of packet paddingPeter Maydell
The PADEN bit in the transmit control register enables padding of short data packets out to the required minimum length. However a typo here meant we were adjusting tx_fifo_len rather than tx_frame_len, so the padding didn't actually happen. Fix this bug. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: qemu-stable@nongnu.org
2014-05-13hw/net/stellaris_enet: Restructure tx_fifo code to avoid buffer overrunPeter Maydell
The current tx_fifo code has a corner case where the guest can overrun the fifo buffer: if automatic CRCs are disabled we allow the guest to write the CRC word even if there isn't actually space for it in the FIFO. The datasheet is unclear about exactly how the hardware deals with this situation; the most plausible answer seems to be that the CRC word is just lost. Implement this fix by separating the "can we stuff another word in the FIFO" logic from the "should we transmit the packet now" check. This also moves us closer to the real hardware, which has a number of ways it can be configured to trigger sending the packet, some of which we don't implement. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: qemu-stable@nongnu.org
2014-05-13savevm: Remove all the unneeded version_minimum_id_old (arm)Juan Quintela
After commit 767adce2d, they are redundant. This way we don't assign them except when needed. Once there, there were lots of cases where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (apart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> [PMM: fixed minor conflict, corrected commit message typos] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-13pc: port 92 reset requires a low->high transitionPaolo Bonzini
The PIIX datasheet says that "before another INIT pulse can be generated via [port 92h], [bit 0] must be written back to a zero. This bug is masked right now because a full reset will clear the value of port 92h. But once we implement soft reset correctly, the next attempt to enable the A20 line by setting bit 1 (and leaving the others untouched) will cause another reset. Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-13apic: do not accept SIPI on the bootstrap processorPaolo Bonzini
SIPI interrupts are ignored on the bootstrap. Never accept one. Cc: Andreas Faerber <afaerber@suse.de> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-13pci-assign: limit # of msix vectorsMichael S. Tsirkin
KVM only supports MSIX table size up to 256 vectors, but some assigned devices support more vectors, at the moment attempts to assign them fail with EINVAL. Tweak the MSIX capability exposed to guest to limit table size to a supported value. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Gonglei <arei.gonglei@huawei.com> Cc: qemu-stable@nongnu.org Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-13pci-assign: Fix a bug when map MSI-X table memory failedGonglei
When mmapping memory for the MSI-X table failsthe dev->msix_table is not set to NULL and assigned_dev_unregister_msix_mmio() will cause a segfault when trying to munmap it. Signed-off-by: Gonglei Arei <arei.gonglei@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com>
2014-05-13Merge remote-tracking branch 'remotes/bonzini/configure' into stagingPeter Maydell
* remotes/bonzini/configure: libcacard: remove libcacard-specific CFLAGS and LIBS from global vars build: simplify and fix fix-obj-vars build: convert some obj-specific CFLAGS to use new foo.o-cflags syntax build: add support for per-object -cflags and -libs to all rules Makefile: use $(INSTALL_LIB) for modules not $(INSTALL_PROG) Makefile.target: use $(INSTALL_PROG) for installing, not $(INSTALL) Makefile: strip tools and modules too build: simplify Makefile.target around unnest-vars invocations build: simplify Makefile.target a bit, use just one rule for softmmu build: Fix per-object variables for Makefile.target Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-13microblaze: boot: Don't hack the elf entry pointPeter Crosthwaite
There was some modulo logic to ensure that Microblaze always booted into physical RAM regardless of the elf entry. Removed it, as QEMU should fail gracefully when given a bad elf, rather than attempt to run it. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-05-13xilinx_timer: Fix writes into TCSR registerGuenter Roeck
The TCSR register has only 11 valid bits. This is now used by the linux kernel to auto-detect endianness, and causes Linux 3.15-rc1 and later to hang when run under qemu-microblaze. Mask valid bits before writing the register to solve the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2014-05-13xilinx_intc: Fix writes into MER registerGuenter Roeck
The MER register only has two valid bits. This is now used by the linux kernel to auto-detect endianness, and causes Linux 3.15-rc1 and later to hang when run under qemu-microblaze. Mask valid bits before writing the register to solve the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> [Edgar: Untabified] Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2014-05-13microblaze: Support loading of u-boot initrd imagesEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-05-12virtio: allow mapping up to max queue sizeMichael S. Tsirkin
It's a loop from i < num_sg and the array is VIRTQUEUE_MAX_SIZE - so it's OK if the value read is VIRTQUEUE_MAX_SIZE. Not a big problem in practice as people don't use such big queues, but it's inelegant. Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-09libcacard: remove libcacard-specific CFLAGS and LIBS from global varsMichael Tokarev
Currently all what's needed for single file libcacard/vcard_emul_nss.c (libnss cflags) and hw/usb/ccid-card-emulated.c (libcacard includes) together with the libs is added to global QEMU_CFLAGS and libs_softmmu. Use the cflags only where really used (for two mentioned files), and libs only where needed. While at it, rename variables to better reflect reality: libcacard_* is really nss_*. This needs a bit more tweaking: $(NSS_LIBS) should not contain $glib_libs (ditto for _cflags). But in order to fix it, some more preparations should be made first. So add a FIXME comment. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-08pci-assign: assigned_initfn(): set monitor error in common error handlerLaszlo Ersek
Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-08pci-assign: propagate errors from assign_intx()Laszlo Ersek
Among the callers, only assigned_initfn() should set the monitor's stored error. Other callers may run in contexts where the monitor's stored error makes no sense. For example: assigned_dev_pci_write_config() assigned_dev_update_msix() assign_intx() Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-08pci-assign: propagate errors from assign_device()Laszlo Ersek
Also, change the return type to "void"; the function is static (with a sole caller) and the negative errno values are not distinguished from each other. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-08pci-assign: propagate errors from assigned_dev_register_regions()Laszlo Ersek
Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-08pci-assign: propagate errors from assigned_dev_register_msix_mmio()Laszlo Ersek
The return type is also changed from "int" to "void", because it was used in a success vs. failure sense only (the caller didn't distinguish error codes from each other, and even assigned_dev_register_msix_mmio() masked mmap()'s errno values with a common -EFAULT). Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-08pci-assign: propagate errors from assigned_device_pci_cap_init()Laszlo Ersek
Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-08pci-assign: propagate errors from get_real_device()Laszlo Ersek
Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-08pci-assign: assignment should fail if we can't read config spaceLaszlo Ersek
assigned_initfn() get_real_device() read() Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-08pci-assign: accept Error from pci_add_capability2()Laszlo Ersek
Propagate any errors while adding PCI capabilities to assigned_device_pci_cap_init(). We'll continue the propagation upwards when assigned_device_pci_cap_init() becomes a leaf itself (when none of its callees will report errors internally any longer when detecting and returning them). Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-11 14:02:30 +0000