From 7a372cf045d44f7653e5a34e2ad3cc4cde572c5b Mon Sep 17 00:00:00 2001 From: qhuang8 Date: Fri, 25 Jan 2008 03:33:55 +0000 Subject: Remove the EDK build infrastructure, which was the temp solution when EDKII build tool did not support build EDK module. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@4640 6f19259b-4bc3-4df7-8a09-765794883524 --- .../Sample/Platform/Ia32/Build/Config.env | 33 --- .../Sample/Platform/Ia32/Build/Ia32.dsc | 102 ------- .../Sample/Platform/Ia32/Build/Makefile | 231 ---------------- .../Sample/Platform/Ia32/Build/PlatformTools.env | 68 ----- .../Sample/Platform/Ia32/Build/build.bat | 304 --------------------- .../Sample/Platform/Ipf/Build/Config.env | 31 --- .../Sample/Platform/Ipf/Build/IPF.dsc | 102 ------- .../Sample/Platform/Ipf/Build/Makefile | 140 ---------- .../Sample/Platform/Ipf/Build/PlatformTools.env | 69 ----- .../Sample/Platform/Ipf/Build/build.bat | 304 --------------------- .../Sample/Platform/X64/Build/Config.env | 33 --- .../Sample/Platform/X64/Build/Makefile | 147 ---------- .../Sample/Platform/X64/Build/PlatformTools.env | 65 ----- .../Sample/Platform/X64/Build/X64.dsc | 104 ------- .../Sample/Platform/X64/Build/build.bat | 304 --------------------- 15 files changed, 2037 deletions(-) delete mode 100644 EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Config.env delete mode 100644 EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Ia32.dsc delete mode 100644 EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Makefile delete mode 100644 EdkCompatibilityPkg/Sample/Platform/Ia32/Build/PlatformTools.env delete mode 100644 EdkCompatibilityPkg/Sample/Platform/Ia32/Build/build.bat delete mode 100644 EdkCompatibilityPkg/Sample/Platform/Ipf/Build/Config.env delete mode 100644 EdkCompatibilityPkg/Sample/Platform/Ipf/Build/IPF.dsc delete mode 100644 EdkCompatibilityPkg/Sample/Platform/Ipf/Build/Makefile delete mode 100644 EdkCompatibilityPkg/Sample/Platform/Ipf/Build/PlatformTools.env delete mode 100644 EdkCompatibilityPkg/Sample/Platform/Ipf/Build/build.bat delete mode 100644 EdkCompatibilityPkg/Sample/Platform/X64/Build/Config.env delete mode 100644 EdkCompatibilityPkg/Sample/Platform/X64/Build/Makefile delete mode 100644 EdkCompatibilityPkg/Sample/Platform/X64/Build/PlatformTools.env delete mode 100644 EdkCompatibilityPkg/Sample/Platform/X64/Build/X64.dsc delete mode 100644 EdkCompatibilityPkg/Sample/Platform/X64/Build/build.bat (limited to 'EdkCompatibilityPkg/Sample') diff --git a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Config.env b/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Config.env deleted file mode 100644 index 51ce1dd6a5..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Config.env +++ /dev/null @@ -1,33 +0,0 @@ -#/*++ -# -# Copyright (c) 2006 - 2007, Intel Corporation -# All rights reserved. This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -# Module Name: -# -# Config.env -# -# Abstract: -# -# This file is used to define platform build configuration. -# It gets included by PlatformTools.env. -# -#--*/ - -BUILD_TARGET_DIRECTORY = Build -EFI_DEBUG = NO -EFI_DEBUG_CLEAR_MEMORY = NO -EFI_PEI_PERFORMANCE = NO -EFI_DXE_PERFORMANCE = NO -EFI_SYMBOLIC_DEBUG = NO -EFI_GENERATE_INTERMEDIATE_FILE = NO -EFI_PEI_REPORT_STATUS_CODE = NO -UEFI_MODE = YES -PI_MODE = YES -USE_VC8 = NO diff --git a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Ia32.dsc b/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Ia32.dsc deleted file mode 100644 index 303e7a6284..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Ia32.dsc +++ /dev/null @@ -1,102 +0,0 @@ -#/*++ -# -# Copyright (c) 2004 - 2007, Intel Corporation -# All rights reserved. This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -# Module Name: -# -# Ia32.dsc -# -# Abstract: -# -# This is the build description file containing the platform -# build definitions. -# -# -# Notes: -# -# The info in this file is broken down into sections. The start of a section -# is designated by a "[" in the first column. So the [=====] separater ends -# a section. -# -#--*/ - - -[=============================================================================] -# -# This section gets processed first by the utility. Define any -# macros that you may use elsewhere in this description file. This is the -# mechanism by which you can pass parameters and defines to the makefiles -# generated for each component. You can define it here, and then make an -# assignment in the [makefile.common] section. For example, if here you -# define MY_VAR = my_var_value, then you can add MY_VAR = $(MY_VAR) in -# the [makefile.common] section and it becomes MY_VAR = my_var_value in -# the output makefiles for each component. -# -[Defines] -PLATFORM = $(PROJECT_NAME) - -[=============================================================================] -# -# Include other common build descriptions -# -!include "$(EDK_SOURCE)\Sample\Platform\Common.dsc" -!include "$(EDK_SOURCE)\Sample\Platform\Common$(PROCESSOR).dsc" - -[=============================================================================] -# -# These control the generation of the FV files -# -[=============================================================================] -[Fv.Fv.Attributes] - -[Fv.Fv.options] - -[Build.Fv.Fv] - -[=============================================================================] -# -# These are the libraries that will be built by the master makefile -# -[=============================================================================] -[Libraries] -DEFINE EDK_PREFIX= - -!include "$(EDK_SOURCE)\Sample\Platform\EdkLibAll.dsc" - -# -# EdkII Glue Library -# -#!include "$(EDK_SOURCE)\Sample\Platform\EdkIIGlueLibAll.dsc" - -[=============================================================================] -# -# These are platform specific libraries that must be built prior to building -# certain drivers that depend upon them. -# -[=============================================================================] -[Libraries.Platform] -Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\BsDataHubStatusCode\BsDataHubStatusCode.inf -Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\RtMemoryStatusCode\RtMemoryStatusCode.inf - -#Other\Maintained\Application\Shell\Library\EfiShellLib.inf - -[=============================================================================] -# -# These are the components that will be built by the master makefile -# -[=============================================================================] -[Components] -DEFINE PACKAGE=Default - -#Add EDK INF file here: -#Other\Maintained\Application\Shell\ShellFull.inf - -[=============================================================================] - diff --git a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Makefile b/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Makefile deleted file mode 100644 index 8ad8646dc4..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/Makefile +++ /dev/null @@ -1,231 +0,0 @@ -#/*++ -# -# Copyright (c) 2004 - 2007, Intel Corporation -# All rights reserved. This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -# Module Name: -# -# Makefile -# -# Abstract: -# -# This makefile is used to build the NT emulation. -# -#--*/ - -# -# Everything depends on EDK_SOURCE & EDK_TOOLS_PATH. Make sure it's defined -# -!IFNDEF EDK_SOURCE -!ERROR EDK_SOURCE environmental variable not set -!ENDIF - -!IFNDEF EDK_TOOLS_PATH -!MESSAGE EDK_TOOLS_PATH environmental variable not set, default setting used -!ENDIF - -# -# Set the processor type -# -PROCESSOR = IA32 - -# -# Define a toolchain so we can pick up the basic defines from -# the EFI tool setup file. -# -TOOLCHAIN = TOOLCHAIN_MSVC - -!INCLUDE PlatformTools.env - -# -# Default target -# -all : customer - -# -# Target to build customer config -# -customer : tempstamp_file build_tools makefiles builds - -# -# Target to build everything quickly -# -fast : build_tools fast_makefiles builds - -# -# Create a file to store the date and time, and used by SetStamp.exe -# -tempstamp_file: -!IF DEFINED(DATE_STAMP) && DEFINED(TIME_STAMP) - @echo $(DATE_STAMP) $(TIME_STAMP) > GenStamp.txt -!ELSEIF EXIST(GenStamp.txt) - - @del GenStamp.txt -!ENDIF - -# -# Make all the EFI build tools by calling the makefile -# -build_tools : - -if not exist $(EDK_TOOLS_OUTPUT) mkdir $(EDK_TOOLS_OUTPUT) - -if exist $(EDK_TOOLS_BIN)\*.* copy $(EDK_TOOLS_BIN)\*.* $(EDK_TOOLS_OUTPUT) - $(MAKE) -f $(EDK_TOOLS_SOURCE)\makefile PROCESSOR=$(PROCESSOR) BUILD_DIR=$(BUILD_DIR) - $(GUIDCHK) -b $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt - -# -# Run ProcessDsc on our main description files to generate the -# makefiles and package files. Specify -v option for more verbose output. -# Specify "-xref filename" to generate a cross-reference file of -# basename-to-fileguid that can be used by VolInfo. -# -makefiles : - $(PROCESSDSC) \ - -d EFI_SOURCE=$(EDK_SOURCE) \ - -d EDK_SOURCE=$(EDK_SOURCE) \ - -d PROCESSOR=$(PROCESSOR) \ - -d PROJECT_NAME=$(PROJECT_NAME) \ - -d COMPRESS_METHOD=$(COMPRESS_METHOD) \ - -d OEMTOOLPATH=$(EDK_TOOLS_OUTPUT) \ - -d SHELL_INF=$(SHELL_INF) \ - -d UEFI_PREFIX=$(UEFI_PREFIX) \ - -d PI_PREFIX=$(PI_PREFIX) \ - -d CAPSULE_INF=$(CAPSULE_INF) \ - -d ATAPI_PASS_THRU_INF=$(ATAPI_PASS_THRU_INF) \ - -d DEVPATH_INF=$(DEVPATH_INF) \ - -d GRAPHICS_INF=$(GRAPHICS_INF) \ - -g $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt \ - -xref FV\Guid.xref \ - $(PROJECT_NAME).dsc - -# -# Build faster by not building components with FV=NULL. Override in the -# DSC file by adding SKIP_FV_NULL=0 on the component lines you want built -# but still have FV=NULL. For example: -# -# Dxe\Drivers\MyDriver\MyDriver.inf FV=NULL SKIP_FV_NULL=0 -# -fast_makefiles : - $(PROCESSDSC) \ - -d EFI_SOURCE=$(EDK_SOURCE) \ - -d EDK_SOURCE=$(EDK_SOURCE) \ - -d PROCESSOR=$(PROCESSOR) \ - -d PROJECT_NAME=$(PROJECT_NAME) \ - -d COMPRESS_METHOD=$(COMPRESS_METHOD) \ - -d OEMTOOLPATH=$(EDK_TOOLS_OUTPUT) \ - -d SHELL_INF=$(SHELL_INF) \ - -d UEFI_PREFIX=$(UEFI_PREFIX) \ - -d PI_PREFIX=$(PI_PREFIX) \ - -d CAPSULE_INF=$(CAPSULE_INF) \ - -d ATAPI_PASS_THRU_INF=$(ATAPI_PASS_THRU_INF) \ - -d DEVPATH_INF=$(DEVPATH_INF) \ - -d GRAPHICS_INF=$(GRAPHICS_INF) \ - -g $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt \ - -xref FV\Guid.xref \ - -d SKIP_FV_NULL=1 \ - $(PROJECT_NAME).dsc - -# -# Create the guid-to-basename cross reference file of protocols -# used by volinfo for decoding dependency expressions. -# -protocols.xref : - -@if not exist fv mkdir FV - cd $(EDK_SOURCE) - $(GUIDCHK) -g -u $(BUILD_TARGET_DIRECTORY) -e inf -x > $(BUILD_DIR)\Fv\protocols.xref - cd $(BUILD_DIR) - -# -# Call all the makefiles that were generated by ProcessDsc. ProcessDsc -# creates the makefile.out that calls all the component makefiles. -# -builds : - $(MAKE) -f makefile.out - -# -# Useful targets -# - -# -# Define a pseudo-target that skips over compiling the build tools and -# also skips creation of the makefiles for the components. The user -# has to be aware that any changes to INF files renders this target -# invalid. -# -quick : builds - -# -# Define a pseudo-target to start building with the libraries or with the -# components. -# -libraries : - $(MAKE) -f makefile.out libraries - -components : - $(MAKE) -f makefile.out components - -# -# Make a pseudo-target to simplify running of the NT emulation. -# -!IF "$(EFI_WIN_NT_FILE_SYSTEM)" == "" -EFI_WIN_NT_FILE_SYSTEM = $(EDK_SOURCE)\Other\Maintained\Application\$(UEFI_PREFIX)Shell\bin\ia32\Apps -!ELSE -EFI_WIN_NT_FILE_SYSTEM = $(EFI_WIN_NT_FILE_SYSTEM)!$(EDK_SOURCE)\Other\Maintained\Application\$(UEFI_PREFIX)Shell\bin\ia32\Apps -!ENDIF - -# -# Make browse info file -# -bsc: - - dir /s /b *.sbr > $(PROCESSOR)\temp.rm - $(BSCMAKE) /n /o $(PROCESSOR)\$(PROJECT_NAME).bsc "@$(PROCESSOR)\temp.rm" - -# -# Create a target to clean up all build directories -# -clean : - - @if exist vc??.* del vc??.* > NUL - - @if exist *.bak del *.bak > NUL - - @if exist $(PROCESSOR) rd /s /q $(PROCESSOR) > NUL - - @if exist ipf rd /s /q ipf > NUL - - @if exist ebc rd /s /q ebc > NUL - - @if exist fv rd /s /q fv > NUL - - @if exist Tools rd /s /q Tools > NUL - - @if exist makefile.out del makefile.out > NUL - - @if exist module.* del module.* > NUL - - @echo All targets cleaned - -# -# Clean up all build directories except for tools. -# -cleanbuilds : - - @if exist *.bak del *.bak > NUL - - @if exist $(PROCESSOR) rd /s /q $(PROCESSOR) > NUL - - @if exist ipf rd /s /q ipf > NUL - - @if exist ebc rd /s /q ebc > NUL - - @if exist fv rd /s /q fv > NUL - - @if exist makefile.out del makefile.out > NUL - - @if exist module.* del module.* > NUL - - @echo All modules cleaned - -# -# Clean up only the tools -# -cleantools : - - @if exist vc??.* del vc??.* > NUL - - @if exist Tools rd /s /q Tools > NUL - - @echo All tools cleaned - -# -# Rebuild target, clean and build all -# -rebuild : clean all - -# -# cleanall target to clean all build directories. -# -cleanall : clean diff --git a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/PlatformTools.env b/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/PlatformTools.env deleted file mode 100644 index 224783c39c..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/PlatformTools.env +++ /dev/null @@ -1,68 +0,0 @@ -#/*++ -# -# Copyright (c) 2004 - 2007, Intel Corporation -# All rights reserved. This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -# Module Name: -# -# PlatformTools.env -# -# Abstract: -# -# This file is used to define platform specific environment variables. -# It gets included by every makefile. -# -#--*/ - -!INCLUDE Config.env - -# -# Set the project name -# -PROJECT_NAME = Ia32 - -# -# Set the build directory -# -BUILD_DIR = $(EDK_SOURCE)\Sample\Platform\$(PROJECT_NAME)\$(BUILD_TARGET_DIRECTORY) - -!IF "$(UEFI_MODE)" == "YES" -GRAPHICS_INF = Sample\Bus\WinNtThunk\Gop\Dxe\WinNtGop.inf -!ELSE -GRAPHICS_INF = Sample\Bus\WinNtThunk\Uga\Dxe\WinNtUga.inf -!ENDIF - -# -# Define compiler names -# -!IFNDEF EDK_TOOLS_PATH -EFI_ASL_LOCAL = YES -!ELSE -EFI_ASSEMBLER_NAME = Masm611 -EFI_ASL_LOCAL = NO -!ENDIF - -# -# These flags are specific to this platform. If a flag is not specific to this -# platform the flag should be placed in the CommonTools.env file. -# Processor architecture specific and global macros can be found in -# CommonTools.env, macros named xxx_ARCH_FLAGS and xxx_STD_FLAGS respectively. -# -C_PROJ_FLAGS = /O1 /D UNICODE /D NEW_PEI_HOBS -ASM_PROJ_FLAGS = /Cx /Zd /Fl$*.lst -LINK_PROJ_FLAGS = -LIB_PROJ_FLAGS = -EBC_C_PROJ_FLAGS = -EBC_LINK_PROJ_FLAGS = -EBC_LIB_PROJ_FLAGS = - -# -# Include processor architecture specific and general Tiano build flags. -# -!INCLUDE $(EDK_SOURCE)\Sample\CommonTools.env diff --git a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/build.bat b/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/build.bat deleted file mode 100644 index c224c2ee74..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/Ia32/Build/build.bat +++ /dev/null @@ -1,304 +0,0 @@ -@rem #/*++ -@rem # -@rem # Copyright (c) 2007, Intel Corporation -@rem # All rights reserved. This program and the accompanying materials -@rem # are licensed and made available under the terms and conditions of the BSD License -@rem # which accompanies this distribution. The full text of the license may be found at -@rem # http://opensource.org/licenses/bsd-license.php -@rem # -@rem # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -@rem # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -@rem # -@rem # Module Name: -@rem # -@rem # build.bat -@rem # -@rem # Abstract: -@rem # -@rem # This script provides single module build, clean and find function -@rem # based on module name. -@rem # -@rem # The auto-generated module.list file records all module names -@rem # described in the current platform.dsc. -@rem # -@rem #--*/ - -@echo off - -setlocal -@rem initilize local variable -set FUNCTION=build -set MODULE= -set UPDATE= -set VERBOSE= - -:parse -if /I "%1"=="/c" ( - set FUNCTION=clean - shift - goto parse -) -if /I "%1"=="clean" ( - set FUNCTION=clean - shift - goto parse -) -if /I "%1"=="/r" ( - set FUNCTION=rebuild - shift - goto parse -) -if /I "%1"=="/h" ( - set FUNCTION=usage - shift - goto parse -) -if /I "%1"=="/?" ( - set FUNCTION=usage - shift - goto parse -) -if /I "%1"=="/f" ( - set FUNCTION=find - shift - goto parse -) -if /I "%1"=="/a" ( - set UPDATE=TRUE - shift - goto parse -) -if /I "%1"=="/v" ( - set VERBOSE=TRUE - shift - goto parse -) -if not "%1"=="" ( - set MODULE=%1 - shift - goto parse -) else ( - @rem no other paramters - if "%FUNCTION%"=="rebuild" goto build - goto %FUNCTION% -) - -:build -set StartTime=%time% -@rem if no input, build all -if "%MODULE%"=="" ( - if "%FUNCTION%"=="rebuild" ( - nmake -nologo -f Makefile clean - ) - nmake -nologo -f Makefile all - goto endtime -) -@rem then try to build special targets: all, fast, tools. -if /I "%MODULE%"=="all" ( - @rem build all modules and tools. - if "%FUNCTION%"=="rebuild" ( - nmake -nologo -f Makefile cleanall - ) - nmake -nologo -f Makefile all - goto endtime -) -if /I "%MODULE%"=="fast" ( - @rem build fast target to skip FV=NULL modules. - if "%FUNCTION%"=="rebuild" ( - nmake -nologo -f Makefile clean - ) - nmake -nologo -f Makefile fast - goto endtime -) -if /I "%MODULE%"=="tools" ( - @rem build all tools. - if "%FUNCTION%"=="rebuild" ( - nmake -nologo -f Makefile cleantools - ) - nmake -nologo -f Makefile build_tools - echo. - echo All tools are built. - goto endtime -) -@rem build single module, update build makefiles -if "%FUNCTION%"=="rebuild" ( - nmake -nologo -f module.mak %MODULE%Clean 2>NUL -) -nmake -nologo -f Makefile flashmap > NUL 2>&1 -nmake -nologo -f Makefile makefiles -if errorlevel 1 goto builderror -@rem check whether input module name is described in current dsc file. -findstr /I /C:" %MODULE% " module.list > NUL -if errorlevel 1 ( - echo. - echo. - findstr /I /C:"%MODULE%" module.list > NUL - if errorlevel 1 goto finderror - for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A - echo. - echo Warning!!! Your specified module name can't be found. - echo One of the above modules may be what you want to build. - goto end -) -@rem build this module -nmake -nologo -f module.mak %MODULE%Build -echo. -if "%FUNCTION%"=="rebuild" ( - echo Module %MODULE% is rebuilt. -) else ( - echo Module %MODULE% is built. -) -:endtime -@rem output build time. -set EndTime=%time% -echo. -echo Start time %StartTime% -echo End time %EndTime% -goto end - -:clean -@rem if no input, default clean all build directories. -if "%MODULE%"=="" ( - nmake -nologo -f Makefile clean - goto end -) -@rem first try to clean special tasks: all, modules and tools -if /I "%MODULE%"=="all" ( - nmake -nologo -f Makefile cleanall - goto end -) -if /I "%MODULE%"=="modules" ( - nmake -nologo -f Makefile cleanbuilds - goto end -) -if /I "%MODULE%"=="tools" ( - nmake -nologo -f Makefile cleantools - goto end -) -@rem clean single module -@rem check whether input module name is in module.list file. -if not exist module.list ( - echo Module list info doesn't exist. - echo Processing dsc file to generate module list info. - nmake -nologo -f Makefile flashmap > NUL 2>&1 - nmake -nologo -f Makefile makefiles > error.log 2>&1 - if errorlevel 1 goto builderror -) -findstr /I /C:" %MODULE% " module.list > NUL -if errorlevel 1 ( - echo. - findstr /I /C:"%MODULE%" module.list > NUL - if errorlevel 1 goto finderror - for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A - echo. - echo Warning!!! Your specified module name can't be found. - echo One of the above modules may be what you want to clean. - goto end -) -@rem clean this module -nmake -nologo -f module.mak %MODULE%Clean 2>NUL -echo. -echo Module %MODULE% is cleaned. -goto end - -:find -@rem find match module name by subname. -if "%UPDATE%"=="TRUE" ( - echo Processing dsc file to update module list info. - nmake -nologo -f Makefile flashmap > NUL 2>&1 - nmake -nologo -f Makefile makefiles > error.log 2>&1 - if errorlevel 1 goto builderror -) -if not exist module.list ( - echo Module list info doesn't exist. - echo Processing dsc file to generate module list info. - nmake -nologo -f Makefile flashmap > NUL 2>&1 - nmake -nologo -f Makefile makefiles > error.log 2>&1 - if errorlevel 1 goto builderror -) -if "%MODULE%"=="" ( - @rem display all - echo. - if "%VERBOSE%"=="TRUE" ( - type module.list - ) else ( - @rem only output module name without module.inf file name - for /F %%A in (module.list) do echo %%A - ) -) else ( - @rem display match module name - echo. - if "%VERBOSE%"=="TRUE" ( - findstr /I /C:"%MODULE%" module.list - if errorlevel 1 goto notfind - ) else ( - findstr /I /C:"%MODULE%" module.list > NUL - if errorlevel 1 goto notfind - for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A - ) -) -goto end - -:usage -echo build or clean single module based on module name after tools are built. -echo. -echo build [/r] [/c] [/f] [/h] [modulename] -echo. -echo build [/r] [modulename] -echo build single module, such as build DxeMain. -echo If /r is specified, the target will be rebuit after cleaned first. -echo if no input modulename or modulename is all, then build all -echo Specail build targets: all, fast, tools. -echo These special targets may not exist in your tip main makefile. -echo build - build all tools and modules -echo build all - build all tools and modules -echo build fast - build all without FV=NULL modules -echo build tools - build all tools. -echo. -echo build /c [modulename] -echo build clean [modulename] -echo remove the temp generated files for single module -echo if no input modulename, then clean all -echo Specail clean targets: all, modules, tools. -echo These special targets may not exist in your tip main makefile. -echo build /c - clean up all build directories -echo build /c all - clean up all build directories and binary dirs. -echo build /c modules - clean up all build directories except for tools. -echo build /c tools - clean up only tools directory. -echo. -echo build /f [/a] [/v] [subname] -echo find all matched modulename with the sub string of module name. -echo option /a re-processes dsc files to update module name list. -echo option /v outputs module name and module.inf file name both. -echo. -echo build /h -echo build /? -echo display help information. -echo. -goto end - -:notfind -echo Warning!!! Your specified module name can't be found. -echo Try to use /f /a options to update module name list. -goto end - -:finderror -echo Warning!!! Your specified module name can't be found. -echo Try to use /f to find modules that you want to build. -echo Or use /h to get the helpinfo of this script. -goto end - -:builderror -if exist error.log type error.log -echo. -if not exist Tools\ProcessDsc.exe ( - echo. - echo Error!!! Build tools may not be ready. Try to build tools first. - echo. -) -del module.* > NUL 2>&1 -goto end - -:end -if exist error.log del error.log -echo on diff --git a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/Config.env b/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/Config.env deleted file mode 100644 index d294b50c6d..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/Config.env +++ /dev/null @@ -1,31 +0,0 @@ -#/*++ -# -# Copyright (c) 2006 - 2007, Intel Corporation -# All rights reserved. This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -# Module Name: -# -# Config.env -# -# Abstract: -# -# This file is used to define platform build configuration. -# It gets included by PlatformTools.env. -# -#--*/ - -BUILD_TARGET_DIRECTORY = Build -EFI_DEBUG = NO -EFI_DEBUG_CLEAR_MEMORY = NO -EFI_SYMBOLIC_DEBUG = NO -EFI_GENERATE_INTERMEDIATE_FILE = NO -UEFI_MODE = YES -USE_VC8 = NO -USE_VC8_IPF = NO -USE_NEWDDK = YES diff --git a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/IPF.dsc b/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/IPF.dsc deleted file mode 100644 index d1574df403..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/IPF.dsc +++ /dev/null @@ -1,102 +0,0 @@ -#/*++ -# -# Copyright (c) 2004 - 2007, Intel Corporation -# All rights reserved. This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -# Module Name: -# -# IPF.dsc -# -# Abstract: -# -# This is the build description file containing the platform -# specific build definitions. -# -# -# Notes: -# -# The info in this file is broken down into sections. The start of a section -# is designated by a "[" in the first column. So the [=====] separater ends -# a section. -# -#--*/ - - -[=============================================================================] -# -# This section gets processed first by the utility. Define any -# macros that you may use elsewhere in this description file. This is the -# mechanism by which you can pass parameters and defines to the makefiles -# generated for each component. You can define it here, and then make an -# assignment in the [makefile.common] section. For example, if here you -# define MY_VAR = my_var_value, then you can add MY_VAR = $(MY_VAR) in -# the [makefile.common] section and it becomes MY_VAR = my_var_value in -# the output makefiles for each component. -# -[Defines] -PLATFORM=$(PROJECT_NAME) - - -[=============================================================================] -# -# Include other common build descriptions -# -!include "$(EDK_SOURCE)\Sample\Platform\Common.dsc" -!include "$(EDK_SOURCE)\Sample\Platform\Common$(PROCESSOR).dsc" - - - -[=============================================================================] -[Fv.Fv.Attributes] - -[Fv.Fv.options] - -[build.fv.Fv] - -[=============================================================================] -# -# These are the libraries that will be built by the master makefile -# -[=============================================================================] -[Libraries] -DEFINE EDK_PREFIX= - -!include "$(EDK_SOURCE)\Sample\Platform\EdkLibAll.dsc" - -# -# EdkII Glue Library -# -#!include "$(EDK_SOURCE)\Sample\Platform\EdkIIGlueLibAll.dsc" - -[=============================================================================] -# -# These are platform specific libraries that must be built prior to building -# certain drivers that depend upon them. -# -[=============================================================================] -[Libraries.Platform] -Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\RtMemoryStatusCode\RtMemoryStatusCode.inf -Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\BsDataHubStatusCode\BsDataHubStatusCode.inf -Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\BsSerialStatusCode\BsSerialStatusCode.inf - -#Other\Maintained\Application\Shell\Library\EfiShellLib.inf - -[=============================================================================] -# -# These are the components that will be built by the master makefile -# -[=============================================================================] -[Components] -DEFINE PACKAGE=Default - -#Add EDK INF file here: -#Other\Maintained\Application\Shell\Shell.inf - - -[=============================================================================] diff --git a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/Makefile b/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/Makefile deleted file mode 100644 index 7df7d84cbf..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/Makefile +++ /dev/null @@ -1,140 +0,0 @@ -#/*++ -# -# Copyright (c) 2004 - 2007, Intel Corporation -# All rights reserved. This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -# Module Name: -# -# Makefile -# -# Abstract: -# -# This makefile is used to build the IPF build tip. -# -#--*/ - -# -# Everything depends on EDK_SOURCE & EDK_TOOLS_PATH. Make sure it's defined -# -!IFNDEF EDK_SOURCE -!ERROR EDK_SOURCE environmental variable not set -!ENDIF - -!IFNDEF EDK_TOOLS_PATH -!MESSAGE EDK_TOOLS_PATH environmental variable not set, default setting used -!ENDIF - -# -# Set the processor type -# -PROCESSOR = IPF - -# -# Define a toolchain so we can pick up the basic defines from -# the EFI tool setup file. -# -TOOLCHAIN = TOOLCHAIN_MSVC - -!INCLUDE PlatformTools.env - -# -# Target to build customer config -# -all : tempstamp_file build_tools makefiles builds - -# -# Create a file to store the date and time, and used by SetStamp.exe -# -tempstamp_file: -!IF DEFINED(DATE_STAMP) && DEFINED(TIME_STAMP) - @echo $(DATE_STAMP) $(TIME_STAMP) > GenStamp.txt -!ELSEIF EXIST(GenStamp.txt) - - @del GenStamp.txt -!ENDIF - -# -# Make all the EFI build tools by calling the makefile -# -build_tools : - -if not exist $(EDK_TOOLS_OUTPUT) mkdir $(EDK_TOOLS_OUTPUT) - -if exist $(EDK_TOOLS_BIN)\*.* copy $(EDK_TOOLS_BIN)\*.* $(EDK_TOOLS_OUTPUT) - $(MAKE) -f $(EDK_TOOLS_SOURCE)\makefile PROCESSOR=$(PROCESSOR) BUILD_DIR=$(BUILD_DIR) - $(GUIDCHK) -b $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt - -# -# Run the utility that processes our description files and generates the -# makefiles. Specify -v option for more verbose output. -# Specify "-xref filename" to generate a cross-reference file of -# basename-to-fileguid that can be used by VolInfo. -# -makefiles : - $(PROCESSDSC) \ - -d EFI_SOURCE=$(EDK_SOURCE) \ - -d EDK_SOURCE=$(EDK_SOURCE) \ - -d PROCESSOR=$(PROCESSOR) \ - -d PROJECT_NAME=$(PROJECT_NAME) \ - -d OEMTOOLPATH=$(EDK_TOOLS_OUTPUT) \ - -d COMPRESS_METHOD=$(COMPRESS_METHOD) \ - -d UEFI_PREFIX=$(UEFI_PREFIX) \ - -d PI_PREFIX=$(PI_PREFIX) \ - -g $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt \ - $(PROJECT_NAME).dsc - - -# -# Call all the makefiles that were generated by ProcessDsc. ProcessDsc -# creates the makefile.out that calls all the component makefiles. -# -builds : - $(MAKE) -f makefile.out libraries - $(MAKE) -f makefile.out components - -# -# Create a target to clean up all build directories -# -clean : - - @if exist vc??.* del vc??.* > NUL - - @if exist *.bak del *.bak > NUL - - @if exist $(PROCESSOR) rd /s /q $(PROCESSOR) > NUL - - @if exist ebc rd /s /q ebc > NUL - - @if exist fv rd /s /q fv > NUL - - @if exist Tools rd /s /q Tools > NUL - - @if exist makefile.out del makefile.out > NUL - - @if exist module.* del module.* > NUL - - @echo All targets cleaned - -# -# Clean up all build directories except for tools. -# -cleanbuilds : - - @if exist *.bak del *.bak > NUL - - @if exist $(PROCESSOR) rd /s /q $(PROCESSOR) > NUL - - @if exist ebc rd /s /q ebc > NUL - - @if exist fv rd /s /q fv > NUL - - @if exist makefile.out del makefile.out > NUL - - @if exist module.* del module.* > NUL - - @echo All modules cleaned - -# -# Clean up only the tools -# -cleantools : - - @if exist vc??.* del vc??.* > NUL - - @if exist Tools rd /s /q Tools > NUL - - @echo All tools cleaned - -# -# Rebuild target, clean and build all -# -rebuild : clean all - -# -# cleanall target to clean all build directories. -# -cleanall : clean diff --git a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/PlatformTools.env b/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/PlatformTools.env deleted file mode 100644 index b12060e6d1..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/PlatformTools.env +++ /dev/null @@ -1,69 +0,0 @@ -#/*++ -# -# Copyright (c) 2004 - 2006, Intel Corporation -# All rights reserved. This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -# Module Name: -# -# PlatformTools.env -# -# Abstract: -# -# This file is used to define platform specific environment variables. -# It gets included by every makefile. -# -#--*/ - -!INCLUDE Config.env - -# -# Set the project name -# -PROJECT_NAME = IPF - -# -# Set the build directory -# -BUILD_DIR = $(EDK_SOURCE)\Sample\Platform\$(PROJECT_NAME)\$(BUILD_TARGET_DIRECTORY) - -# -# Define compiler names -# - -!IFNDEF EDK_TOOLS_PATH -EFI_ASL_LOCAL = YES -!ELSE -!IF "$(USE_NEWDDK)" == "YES" -EFI_COMPILER_NAME = DDK3790.1830 -EFI_ASSEMBLER_NAME = DDK3790.1830 -!ELSE -EFI_COMPILER_NAME = DDK3790 -EFI_ASSEMBLER_NAME = DDK3790 -!ENDIF -EFI_ASL_LOCAL = NO -!ENDIF - -# -# These flags are specific to this platform. If a flag is not specific to this -# platform the flag should be placed in the CommonTools.env file. -# Processor architecture specific and global macros can be found in -# CommonTools.env, macros named xxx_ARCH_FLAGS and xxx_STD_FLAGS respectively. -# -C_PROJ_FLAGS = /Os -ASM_PROJ_FLAGS = -LINK_PROJ_FLAGS = /ALIGN:32 -LIB_PROJ_FLAGS = -EBC_C_PROJ_FLAGS = -EBC_LINK_PROJ_FLAGS = -EBC_LIB_PROJ_FLAGS = - -# -# Include processor architecture specific and general EFI build flags. -# -!INCLUDE $(EDK_SOURCE)\Sample\CommonTools.env \ No newline at end of file diff --git a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/build.bat b/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/build.bat deleted file mode 100644 index c224c2ee74..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/Ipf/Build/build.bat +++ /dev/null @@ -1,304 +0,0 @@ -@rem #/*++ -@rem # -@rem # Copyright (c) 2007, Intel Corporation -@rem # All rights reserved. This program and the accompanying materials -@rem # are licensed and made available under the terms and conditions of the BSD License -@rem # which accompanies this distribution. The full text of the license may be found at -@rem # http://opensource.org/licenses/bsd-license.php -@rem # -@rem # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -@rem # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -@rem # -@rem # Module Name: -@rem # -@rem # build.bat -@rem # -@rem # Abstract: -@rem # -@rem # This script provides single module build, clean and find function -@rem # based on module name. -@rem # -@rem # The auto-generated module.list file records all module names -@rem # described in the current platform.dsc. -@rem # -@rem #--*/ - -@echo off - -setlocal -@rem initilize local variable -set FUNCTION=build -set MODULE= -set UPDATE= -set VERBOSE= - -:parse -if /I "%1"=="/c" ( - set FUNCTION=clean - shift - goto parse -) -if /I "%1"=="clean" ( - set FUNCTION=clean - shift - goto parse -) -if /I "%1"=="/r" ( - set FUNCTION=rebuild - shift - goto parse -) -if /I "%1"=="/h" ( - set FUNCTION=usage - shift - goto parse -) -if /I "%1"=="/?" ( - set FUNCTION=usage - shift - goto parse -) -if /I "%1"=="/f" ( - set FUNCTION=find - shift - goto parse -) -if /I "%1"=="/a" ( - set UPDATE=TRUE - shift - goto parse -) -if /I "%1"=="/v" ( - set VERBOSE=TRUE - shift - goto parse -) -if not "%1"=="" ( - set MODULE=%1 - shift - goto parse -) else ( - @rem no other paramters - if "%FUNCTION%"=="rebuild" goto build - goto %FUNCTION% -) - -:build -set StartTime=%time% -@rem if no input, build all -if "%MODULE%"=="" ( - if "%FUNCTION%"=="rebuild" ( - nmake -nologo -f Makefile clean - ) - nmake -nologo -f Makefile all - goto endtime -) -@rem then try to build special targets: all, fast, tools. -if /I "%MODULE%"=="all" ( - @rem build all modules and tools. - if "%FUNCTION%"=="rebuild" ( - nmake -nologo -f Makefile cleanall - ) - nmake -nologo -f Makefile all - goto endtime -) -if /I "%MODULE%"=="fast" ( - @rem build fast target to skip FV=NULL modules. - if "%FUNCTION%"=="rebuild" ( - nmake -nologo -f Makefile clean - ) - nmake -nologo -f Makefile fast - goto endtime -) -if /I "%MODULE%"=="tools" ( - @rem build all tools. - if "%FUNCTION%"=="rebuild" ( - nmake -nologo -f Makefile cleantools - ) - nmake -nologo -f Makefile build_tools - echo. - echo All tools are built. - goto endtime -) -@rem build single module, update build makefiles -if "%FUNCTION%"=="rebuild" ( - nmake -nologo -f module.mak %MODULE%Clean 2>NUL -) -nmake -nologo -f Makefile flashmap > NUL 2>&1 -nmake -nologo -f Makefile makefiles -if errorlevel 1 goto builderror -@rem check whether input module name is described in current dsc file. -findstr /I /C:" %MODULE% " module.list > NUL -if errorlevel 1 ( - echo. - echo. - findstr /I /C:"%MODULE%" module.list > NUL - if errorlevel 1 goto finderror - for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A - echo. - echo Warning!!! Your specified module name can't be found. - echo One of the above modules may be what you want to build. - goto end -) -@rem build this module -nmake -nologo -f module.mak %MODULE%Build -echo. -if "%FUNCTION%"=="rebuild" ( - echo Module %MODULE% is rebuilt. -) else ( - echo Module %MODULE% is built. -) -:endtime -@rem output build time. -set EndTime=%time% -echo. -echo Start time %StartTime% -echo End time %EndTime% -goto end - -:clean -@rem if no input, default clean all build directories. -if "%MODULE%"=="" ( - nmake -nologo -f Makefile clean - goto end -) -@rem first try to clean special tasks: all, modules and tools -if /I "%MODULE%"=="all" ( - nmake -nologo -f Makefile cleanall - goto end -) -if /I "%MODULE%"=="modules" ( - nmake -nologo -f Makefile cleanbuilds - goto end -) -if /I "%MODULE%"=="tools" ( - nmake -nologo -f Makefile cleantools - goto end -) -@rem clean single module -@rem check whether input module name is in module.list file. -if not exist module.list ( - echo Module list info doesn't exist. - echo Processing dsc file to generate module list info. - nmake -nologo -f Makefile flashmap > NUL 2>&1 - nmake -nologo -f Makefile makefiles > error.log 2>&1 - if errorlevel 1 goto builderror -) -findstr /I /C:" %MODULE% " module.list > NUL -if errorlevel 1 ( - echo. - findstr /I /C:"%MODULE%" module.list > NUL - if errorlevel 1 goto finderror - for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A - echo. - echo Warning!!! Your specified module name can't be found. - echo One of the above modules may be what you want to clean. - goto end -) -@rem clean this module -nmake -nologo -f module.mak %MODULE%Clean 2>NUL -echo. -echo Module %MODULE% is cleaned. -goto end - -:find -@rem find match module name by subname. -if "%UPDATE%"=="TRUE" ( - echo Processing dsc file to update module list info. - nmake -nologo -f Makefile flashmap > NUL 2>&1 - nmake -nologo -f Makefile makefiles > error.log 2>&1 - if errorlevel 1 goto builderror -) -if not exist module.list ( - echo Module list info doesn't exist. - echo Processing dsc file to generate module list info. - nmake -nologo -f Makefile flashmap > NUL 2>&1 - nmake -nologo -f Makefile makefiles > error.log 2>&1 - if errorlevel 1 goto builderror -) -if "%MODULE%"=="" ( - @rem display all - echo. - if "%VERBOSE%"=="TRUE" ( - type module.list - ) else ( - @rem only output module name without module.inf file name - for /F %%A in (module.list) do echo %%A - ) -) else ( - @rem display match module name - echo. - if "%VERBOSE%"=="TRUE" ( - findstr /I /C:"%MODULE%" module.list - if errorlevel 1 goto notfind - ) else ( - findstr /I /C:"%MODULE%" module.list > NUL - if errorlevel 1 goto notfind - for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A - ) -) -goto end - -:usage -echo build or clean single module based on module name after tools are built. -echo. -echo build [/r] [/c] [/f] [/h] [modulename] -echo. -echo build [/r] [modulename] -echo build single module, such as build DxeMain. -echo If /r is specified, the target will be rebuit after cleaned first. -echo if no input modulename or modulename is all, then build all -echo Specail build targets: all, fast, tools. -echo These special targets may not exist in your tip main makefile. -echo build - build all tools and modules -echo build all - build all tools and modules -echo build fast - build all without FV=NULL modules -echo build tools - build all tools. -echo. -echo build /c [modulename] -echo build clean [modulename] -echo remove the temp generated files for single module -echo if no input modulename, then clean all -echo Specail clean targets: all, modules, tools. -echo These special targets may not exist in your tip main makefile. -echo build /c - clean up all build directories -echo build /c all - clean up all build directories and binary dirs. -echo build /c modules - clean up all build directories except for tools. -echo build /c tools - clean up only tools directory. -echo. -echo build /f [/a] [/v] [subname] -echo find all matched modulename with the sub string of module name. -echo option /a re-processes dsc files to update module name list. -echo option /v outputs module name and module.inf file name both. -echo. -echo build /h -echo build /? -echo display help information. -echo. -goto end - -:notfind -echo Warning!!! Your specified module name can't be found. -echo Try to use /f /a options to update module name list. -goto end - -:finderror -echo Warning!!! Your specified module name can't be found. -echo Try to use /f to find modules that you want to build. -echo Or use /h to get the helpinfo of this script. -goto end - -:builderror -if exist error.log type error.log -echo. -if not exist Tools\ProcessDsc.exe ( - echo. - echo Error!!! Build tools may not be ready. Try to build tools first. - echo. -) -del module.* > NUL 2>&1 -goto end - -:end -if exist error.log del error.log -echo on diff --git a/EdkCompatibilityPkg/Sample/Platform/X64/Build/Config.env b/EdkCompatibilityPkg/Sample/Platform/X64/Build/Config.env deleted file mode 100644 index b846afe277..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/X64/Build/Config.env +++ /dev/null @@ -1,33 +0,0 @@ -#/*++ -# -# Copyright (c) 2006 - 2007, Intel Corporation -# All rights reserved. This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -# Module Name: -# -# Config.env -# -# Abstract: -# -# This file is used to define platform build configuration. -# It gets included by PlatformTools.env. -# -#--*/ - -BUILD_TARGET_DIRECTORY = Build -EFI_DEBUG = NO -EFI_DEBUG_CLEAR_MEMORY = NO -EFI_PEI_PERFORMANCE = NO -EFI_DXE_PERFORMANCE = NO -EFI_SYMBOLIC_DEBUG = NO -EFI_GENERATE_INTERMEDIATE_FILE = NO -UEFI_MODE = YES -USE_VC8 = NO -USE_VC8_X64 = NO -USE_NEWDDK = YES diff --git a/EdkCompatibilityPkg/Sample/Platform/X64/Build/Makefile b/EdkCompatibilityPkg/Sample/Platform/X64/Build/Makefile deleted file mode 100644 index bbb1ad36ca..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/X64/Build/Makefile +++ /dev/null @@ -1,147 +0,0 @@ -#/*++ -# -# Copyright (c) 2006 - 2007, Intel Corporation -# All rights reserved. This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -# Module Name: -# Makefile -# -# Abstract: -# Makefile for this build tip -# -#--*/ - -# -# Everything depends on EDK_SOURCE being set. -# -!IFNDEF EDK_SOURCE -!ERROR EDK_SOURCE environmental variable not set -!ENDIF - -!IFNDEF EDK_TOOLS_PATH -!MESSAGE EDK_TOOLS_PATH environmental variable not set, default setting used -!ENDIF - -# -# Set the processor type -# -PROCESSOR = IA32 - -# -# Define a toolchain so we can pick up the basic defines from -# the EFI tool setup file. -# -TOOLCHAIN = TOOLCHAIN_MSVC - -# -# Include the platform-specific settings file -# -!INCLUDE PlatformTools.env - -# -# Default target to create the makefiles and then build the drivers -# -all : build_tools makefiles builds - -# -# Make all the build tools by calling the makefile -# -build_tools : - -if not exist $(EDK_TOOLS_OUTPUT) mkdir $(EDK_TOOLS_OUTPUT) - -if exist $(EDK_TOOLS_BIN)\*.* copy $(EDK_TOOLS_BIN)\*.* $(EDK_TOOLS_OUTPUT) - $(MAKE) -f $(EDK_TOOLS_SOURCE)\makefile PROCESSOR=$(PROCESSOR) BUILD_DIR=$(BUILD_DIR) - $(GUIDCHK) -b $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt - -PROCESSOR=X64 - -# -# Run ProcessDsc on our main description files to generate the -# makefiles and package files. Specify -v option for more verbose output. -# Specify "-xref filename" to generate a cross-reference file of -# basename-to-fileguid that can be used by VolInfo. -# -makefiles : - $(PROCESSDSC) \ - -d EFI_SOURCE=$(EDK_SOURCE) \ - -d EDK_SOURCE=$(EDK_SOURCE) \ - -d PROCESSOR=$(PROCESSOR) \ - -d PROJECT_NAME=$(PROJECT_NAME) \ - -d PROJECT_FAMILY=$(PROJECT_FAMILY) \ - -d UEFI_PREFIX=$(UEFI_PREFIX) \ - -d PI_PREFIX=$(PI_PREFIX) \ - -d COMPRESS_METHOD=$(COMPRESS_METHOD) \ - -d OEMTOOLPATH=$(EDK_TOOLS_OUTPUT) \ - -g $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt \ - $(PROJECT_NAME).dsc - -# -# Call all the makefiles that were generated by ProcessDsc. ProcessDsc -# creates the makefile.out that calls all the component makefiles. -# -builds : - $(MAKE) -f makefile.out libraries - $(MAKE) -f makefile.out components - -# -# Define a pseudo-target to start building with the libraries or with the -# components. -# -libraries : - $(MAKE) -f makefile.out libraries - -components : - $(MAKE) -f makefile.out components - -# -# Create a target to clean up all build directories -# -clean : - - @if exist vc??.* del vc??.* > NUL - - @if exist *.bak del *.bak > NUL - - @if exist ia32 rd /s/q ia32 > NUL - - @if exist ipf rd /s /q ipf > NUL - - @if exist ebc rd /s /q ebc > NUL - - @if exist x64 rd /s /q x64 > NUL - - @if exist fv rd /s /q fv > NUL - - @if exist Tools rd /s /q Tools > NUL - - @if exist makefile.out del makefile.out > NUL - - @if exist module.* del module.* > NUL - - @echo All targets cleaned - -# -# Clean up all build directories except for tools. -# -cleanbuilds : - - @if exist *.bak del *.bak > NUL - - @if exist ia32 rd /s/q ia32 > NUL - - @if exist ipf rd /s /q ipf > NUL - - @if exist ebc rd /s /q ebc > NUL - - @if exist x64 rd /s /q x64 > NUL - - @if exist fv rd /s /q fv > NUL - - @if exist makefile.out del makefile.out > NUL - - @if exist module.* del module.* > NUL - - @echo All modules cleaned - -# -# Clean up only the tools -# -cleantools : - - @if exist vc??.* del vc??.* > NUL - - @if exist Tools rd /s /q Tools > NUL - - @echo All tools cleaned - -# -# Rebuild target, clean and build all -# -rebuild : clean all - -# -# cleanall target to clean all build directories. -# -cleanall : clean diff --git a/EdkCompatibilityPkg/Sample/Platform/X64/Build/PlatformTools.env b/EdkCompatibilityPkg/Sample/Platform/X64/Build/PlatformTools.env deleted file mode 100644 index 79882f3b89..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/X64/Build/PlatformTools.env +++ /dev/null @@ -1,65 +0,0 @@ -#/*++ -# -# Copyright (c) 2006, Intel Corporation -# All rights reserved. This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -# Module Name: -# -# PlatformTools.env -# -# Abstract: -# This file is used to define platform specific environment variables. -# It gets included by every makefile. -# -#--*/ - -!INCLUDE Config.env - -# -# Set the project name -# -PROJECT_NAME = X64 - -# -# Set the build directory -# -BUILD_DIR = $(EDK_SOURCE)\Sample\Platform\$(PROJECT_NAME)\$(BUILD_TARGET_DIRECTORY) - -# -# Define compiler names -# -!IFNDEF EDK_TOOLS_PATH -EFI_ASL_LOCAL = YES -!ELSE -EFI_ASSEMBLER_NAME = Masm611 -EFI_COMPILER_X64_NAME = AMD64 -EFI_ASL_LOCAL = NO -!ENDIF - -# -# These flags are specific to this platform. If a flag is not specific to this -# platform the flag should be placed in the CommonTools.env file. -# Processor architecture specific and global macros can be found in -# CommonTools.env, macros named xxx_ARCH_FLAGS and xxx_STD_FLAGS respectively. -# -C_PROJ_FLAGS = /O1 -ASM_PROJ_FLAGS = -LINK_PROJ_FLAGS = /ALIGN:32 -LIB_PROJ_FLAGS = -EBC_C_PROJ_FLAGS = -EBC_LINK_PROJ_FLAGS = -EBC_LIB_PROJ_FLAGS = - -# -# Include processor architecture specific and general Tiano build flags. -# -!INCLUDE $(EDK_SOURCE)\Sample\CommonTools.env - - - diff --git a/EdkCompatibilityPkg/Sample/Platform/X64/Build/X64.dsc b/EdkCompatibilityPkg/Sample/Platform/X64/Build/X64.dsc deleted file mode 100644 index 2893d8794c..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/X64/Build/X64.dsc +++ /dev/null @@ -1,104 +0,0 @@ -#/*++ -# -# Copyright (c) 2006 - 2007, Intel Corporation -# All rights reserved. This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -# Module Name: -# -# X64.dsc -# -# Abstract: -# -# This is the build description file containing the platform -# build definitions. -# -# -# Notes: -# -# The info in this file is broken down into sections. The start of a section -# is designated by a "[" in the first column. So the [=====] separater ends -# a section. -# -#--*/ - - -[=============================================================================] -# -# This section gets processed first by the utility. Define any -# macros that you may use elsewhere in this description file. This is the -# mechanism by which you can pass parameters and defines to the makefiles -# generated for each component. You can define it here, and then make an -# assignment in the [makefile.common] section. For example, if here you -# define MY_VAR = my_var_value, then you can add MY_VAR = $(MY_VAR) in -# the [makefile.common] section and it becomes MY_VAR = my_var_value in -# the output makefiles for each component. -# -[Defines] -PLATFORM = $(PROJECT_NAME) - -[=============================================================================] -# -# Include other common build descriptions -# -!include "$(EDK_SOURCE)\Sample\Platform\Common.dsc" -!include "$(EDK_SOURCE)\Sample\Platform\Common$(PROCESSOR).dsc" - -[=============================================================================] -[Fv.Fv.Attributes] - -[Fv.Fv.options] - -[Build.Fv.Fv] - -[=============================================================================] -# -# These are the libraries that will be built by the master makefile -# -[=============================================================================] -[Libraries] -DEFINE EDK_PREFIX= - -DEFINE PROCESSOR=IA32 - -!include "$(EDK_SOURCE)\Sample\Platform\EdkLib32.dsc" - -#!include "$(EDK_SOURCE)\Sample\Platform\EdkIIGlueLib32.dsc" - -DEFINE PROCESSOR=X64 - -!include "$(EDK_SOURCE)\Sample\Platform\EdkLibAll.dsc" - -#!include "$(EDK_SOURCE)\Sample\Platform\EdkIIGlueLibAll.dsc" - -[=============================================================================] -# -# These are platform specific libraries that must be built prior to building -# certain drivers that depend upon them. -# -[=============================================================================] -[Libraries.Platform] - -DEFINE PROCESSOR=X64 - -Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\BsDataHubStatusCode\BsDataHubStatusCode.inf -Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\RtMemoryStatusCode\RtMemoryStatusCode.inf - -[=============================================================================] -# -# These are the components that will be built by the master makefile -# -[=============================================================================] -[Components] -DEFINE PACKAGE=Default - -#Add EDK INF file here: -#Other\Maintained\Application\Shell\ShellFull.inf - - -[=============================================================================] \ No newline at end of file diff --git a/EdkCompatibilityPkg/Sample/Platform/X64/Build/build.bat b/EdkCompatibilityPkg/Sample/Platform/X64/Build/build.bat deleted file mode 100644 index c224c2ee74..0000000000 --- a/EdkCompatibilityPkg/Sample/Platform/X64/Build/build.bat +++ /dev/null @@ -1,304 +0,0 @@ -@rem #/*++ -@rem # -@rem # Copyright (c) 2007, Intel Corporation -@rem # All rights reserved. This program and the accompanying materials -@rem # are licensed and made available under the terms and conditions of the BSD License -@rem # which accompanies this distribution. The full text of the license may be found at -@rem # http://opensource.org/licenses/bsd-license.php -@rem # -@rem # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -@rem # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -@rem # -@rem # Module Name: -@rem # -@rem # build.bat -@rem # -@rem # Abstract: -@rem # -@rem # This script provides single module build, clean and find function -@rem # based on module name. -@rem # -@rem # The auto-generated module.list file records all module names -@rem # described in the current platform.dsc. -@rem # -@rem #--*/ - -@echo off - -setlocal -@rem initilize local variable -set FUNCTION=build -set MODULE= -set UPDATE= -set VERBOSE= - -:parse -if /I "%1"=="/c" ( - set FUNCTION=clean - shift - goto parse -) -if /I "%1"=="clean" ( - set FUNCTION=clean - shift - goto parse -) -if /I "%1"=="/r" ( - set FUNCTION=rebuild - shift - goto parse -) -if /I "%1"=="/h" ( - set FUNCTION=usage - shift - goto parse -) -if /I "%1"=="/?" ( - set FUNCTION=usage - shift - goto parse -) -if /I "%1"=="/f" ( - set FUNCTION=find - shift - goto parse -) -if /I "%1"=="/a" ( - set UPDATE=TRUE - shift - goto parse -) -if /I "%1"=="/v" ( - set VERBOSE=TRUE - shift - goto parse -) -if not "%1"=="" ( - set MODULE=%1 - shift - goto parse -) else ( - @rem no other paramters - if "%FUNCTION%"=="rebuild" goto build - goto %FUNCTION% -) - -:build -set StartTime=%time% -@rem if no input, build all -if "%MODULE%"=="" ( - if "%FUNCTION%"=="rebuild" ( - nmake -nologo -f Makefile clean - ) - nmake -nologo -f Makefile all - goto endtime -) -@rem then try to build special targets: all, fast, tools. -if /I "%MODULE%"=="all" ( - @rem build all modules and tools. - if "%FUNCTION%"=="rebuild" ( - nmake -nologo -f Makefile cleanall - ) - nmake -nologo -f Makefile all - goto endtime -) -if /I "%MODULE%"=="fast" ( - @rem build fast target to skip FV=NULL modules. - if "%FUNCTION%"=="rebuild" ( - nmake -nologo -f Makefile clean - ) - nmake -nologo -f Makefile fast - goto endtime -) -if /I "%MODULE%"=="tools" ( - @rem build all tools. - if "%FUNCTION%"=="rebuild" ( - nmake -nologo -f Makefile cleantools - ) - nmake -nologo -f Makefile build_tools - echo. - echo All tools are built. - goto endtime -) -@rem build single module, update build makefiles -if "%FUNCTION%"=="rebuild" ( - nmake -nologo -f module.mak %MODULE%Clean 2>NUL -) -nmake -nologo -f Makefile flashmap > NUL 2>&1 -nmake -nologo -f Makefile makefiles -if errorlevel 1 goto builderror -@rem check whether input module name is described in current dsc file. -findstr /I /C:" %MODULE% " module.list > NUL -if errorlevel 1 ( - echo. - echo. - findstr /I /C:"%MODULE%" module.list > NUL - if errorlevel 1 goto finderror - for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A - echo. - echo Warning!!! Your specified module name can't be found. - echo One of the above modules may be what you want to build. - goto end -) -@rem build this module -nmake -nologo -f module.mak %MODULE%Build -echo. -if "%FUNCTION%"=="rebuild" ( - echo Module %MODULE% is rebuilt. -) else ( - echo Module %MODULE% is built. -) -:endtime -@rem output build time. -set EndTime=%time% -echo. -echo Start time %StartTime% -echo End time %EndTime% -goto end - -:clean -@rem if no input, default clean all build directories. -if "%MODULE%"=="" ( - nmake -nologo -f Makefile clean - goto end -) -@rem first try to clean special tasks: all, modules and tools -if /I "%MODULE%"=="all" ( - nmake -nologo -f Makefile cleanall - goto end -) -if /I "%MODULE%"=="modules" ( - nmake -nologo -f Makefile cleanbuilds - goto end -) -if /I "%MODULE%"=="tools" ( - nmake -nologo -f Makefile cleantools - goto end -) -@rem clean single module -@rem check whether input module name is in module.list file. -if not exist module.list ( - echo Module list info doesn't exist. - echo Processing dsc file to generate module list info. - nmake -nologo -f Makefile flashmap > NUL 2>&1 - nmake -nologo -f Makefile makefiles > error.log 2>&1 - if errorlevel 1 goto builderror -) -findstr /I /C:" %MODULE% " module.list > NUL -if errorlevel 1 ( - echo. - findstr /I /C:"%MODULE%" module.list > NUL - if errorlevel 1 goto finderror - for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A - echo. - echo Warning!!! Your specified module name can't be found. - echo One of the above modules may be what you want to clean. - goto end -) -@rem clean this module -nmake -nologo -f module.mak %MODULE%Clean 2>NUL -echo. -echo Module %MODULE% is cleaned. -goto end - -:find -@rem find match module name by subname. -if "%UPDATE%"=="TRUE" ( - echo Processing dsc file to update module list info. - nmake -nologo -f Makefile flashmap > NUL 2>&1 - nmake -nologo -f Makefile makefiles > error.log 2>&1 - if errorlevel 1 goto builderror -) -if not exist module.list ( - echo Module list info doesn't exist. - echo Processing dsc file to generate module list info. - nmake -nologo -f Makefile flashmap > NUL 2>&1 - nmake -nologo -f Makefile makefiles > error.log 2>&1 - if errorlevel 1 goto builderror -) -if "%MODULE%"=="" ( - @rem display all - echo. - if "%VERBOSE%"=="TRUE" ( - type module.list - ) else ( - @rem only output module name without module.inf file name - for /F %%A in (module.list) do echo %%A - ) -) else ( - @rem display match module name - echo. - if "%VERBOSE%"=="TRUE" ( - findstr /I /C:"%MODULE%" module.list - if errorlevel 1 goto notfind - ) else ( - findstr /I /C:"%MODULE%" module.list > NUL - if errorlevel 1 goto notfind - for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A - ) -) -goto end - -:usage -echo build or clean single module based on module name after tools are built. -echo. -echo build [/r] [/c] [/f] [/h] [modulename] -echo. -echo build [/r] [modulename] -echo build single module, such as build DxeMain. -echo If /r is specified, the target will be rebuit after cleaned first. -echo if no input modulename or modulename is all, then build all -echo Specail build targets: all, fast, tools. -echo These special targets may not exist in your tip main makefile. -echo build - build all tools and modules -echo build all - build all tools and modules -echo build fast - build all without FV=NULL modules -echo build tools - build all tools. -echo. -echo build /c [modulename] -echo build clean [modulename] -echo remove the temp generated files for single module -echo if no input modulename, then clean all -echo Specail clean targets: all, modules, tools. -echo These special targets may not exist in your tip main makefile. -echo build /c - clean up all build directories -echo build /c all - clean up all build directories and binary dirs. -echo build /c modules - clean up all build directories except for tools. -echo build /c tools - clean up only tools directory. -echo. -echo build /f [/a] [/v] [subname] -echo find all matched modulename with the sub string of module name. -echo option /a re-processes dsc files to update module name list. -echo option /v outputs module name and module.inf file name both. -echo. -echo build /h -echo build /? -echo display help information. -echo. -goto end - -:notfind -echo Warning!!! Your specified module name can't be found. -echo Try to use /f /a options to update module name list. -goto end - -:finderror -echo Warning!!! Your specified module name can't be found. -echo Try to use /f to find modules that you want to build. -echo Or use /h to get the helpinfo of this script. -goto end - -:builderror -if exist error.log type error.log -echo. -if not exist Tools\ProcessDsc.exe ( - echo. - echo Error!!! Build tools may not be ready. Try to build tools first. - echo. -) -del module.* > NUL 2>&1 -goto end - -:end -if exist error.log del error.log -echo on -- cgit v1.2.3