diff options
103 files changed, 576 insertions, 1012 deletions
diff --git a/MdePkg/Include/Pi/PiPeiCis.h b/MdePkg/Include/Pi/PiPeiCis.h index 8b39917be9..9516272523 100644 --- a/MdePkg/Include/Pi/PiPeiCis.h +++ b/MdePkg/Include/Pi/PiPeiCis.h @@ -715,109 +715,68 @@ struct _EFI_PEI_SERVICES { ///
/// The table header for the PEI Services Table.
///
- EFI_TABLE_HEADER Hdr;
- ///
- /// Installs an interface in the PEI PEIM-to-PEIM
- /// Interface (PPI) database by GUID.
- ///
- EFI_PEI_INSTALL_PPI InstallPpi;
- ///
- /// Reinstalls an interface in the PEI PPI database by GUID.
- ///
- EFI_PEI_REINSTALL_PPI ReInstallPpi;
- ///
- /// Locates an interface in the PEI PPI database by GUID.
- ///
- EFI_PEI_LOCATE_PPI LocatePpi;
- ///
- /// Installs the notification service to be called back
- /// upon the installation or reinstallation of a given interface.
- ///
- EFI_PEI_NOTIFY_PPI NotifyPpi;
- ///
- /// Returns the present value of the boot mode.
- ///
- EFI_PEI_GET_BOOT_MODE GetBootMode;
- ///
- /// Sets the value of the boot mode.
- ///
- EFI_PEI_SET_BOOT_MODE SetBootMode;
- ///
- /// Returns the pointer to the list of Hand-Off Blocks (HOBs) in memory.
- ///
- EFI_PEI_GET_HOB_LIST GetHobList;
- ///
- /// Abstracts the creation of HOB headers.
- ///
- EFI_PEI_CREATE_HOB CreateHob;
- ///
- /// Discovers instances of firmware volumes in the system.
- ///
+ EFI_TABLE_HEADER Hdr;
+
+ //
+ // PPI Functions
+ //
+ EFI_PEI_INSTALL_PPI InstallPpi;
+ EFI_PEI_REINSTALL_PPI ReInstallPpi;
+ EFI_PEI_LOCATE_PPI LocatePpi;
+ EFI_PEI_NOTIFY_PPI NotifyPpi;
+
+ //
+ // Boot Mode Functions
+ //
+ EFI_PEI_GET_BOOT_MODE GetBootMode;
+ EFI_PEI_SET_BOOT_MODE SetBootMode;
+
+ //
+ // HOB Functions
+ //
+ EFI_PEI_GET_HOB_LIST GetHobList;
+ EFI_PEI_CREATE_HOB CreateHob;
+
+ //
+ // Firmware Volume Functions
+ //
EFI_PEI_FFS_FIND_NEXT_VOLUME2 FfsFindNextVolume;
- ///
- /// Discovers instances of firmware files in the system.
- ///
EFI_PEI_FFS_FIND_NEXT_FILE2 FfsFindNextFile;
- ///
- /// Searches for a section in a firmware file.
- ///
EFI_PEI_FFS_FIND_SECTION_DATA2 FfsFindSectionData;
- ///
- /// Registers the found memory configuration with the PEI Foundation.
- ///
- EFI_PEI_INSTALL_PEI_MEMORY InstallPeiMemory;
- ///
- /// Allocates memory ranges that are managed by the PEI Foundation.
- ///
- EFI_PEI_ALLOCATE_PAGES AllocatePages;
- ///
- /// Allocate memory ranges that are managed by the PEI Foundation.
- ///
- EFI_PEI_ALLOCATE_POOL AllocatePool;
- ///
- /// Copies the contents of one buffer to another buffer.
- ///
- EFI_PEI_COPY_MEM CopyMem;
- ///
- /// Fills a buffer with a specified value.
- ///
- EFI_PEI_SET_MEM SetMem;
- ///
- /// Provides an interface that a PEIM can call to report a status code.
- ///
- EFI_PEI_REPORT_STATUS_CODE ReportStatusCode;
- ///
- /// Resets the entire platform.
- ///
- EFI_PEI_RESET_SYSTEM ResetSystem;
- ///
- /// Provides an interface that a PEIM can call to execute
- /// an I/O transaction. This interface is installed by provider
- /// PEIM by copying the interface into the PEI Service table.
- ///
- EFI_PEI_CPU_IO_PPI *CpuIo;
- ///
- /// Provides an interface that a PEIM can call to execute PCI
- /// Configuration transactions. This interface is installed by
- /// provider PEIM by copying the interface into the EFI_PEI_SERVICES table.
- ///
- EFI_PEI_PCI_CFG2_PPI *PciCfg;
- ///
- /// Discovers firmware files within a volume by name.
- ///
- EFI_PEI_FFS_FIND_BY_NAME FfsFindFileByName;
- ///
- /// Return information about a particular file.
- ///
- EFI_PEI_FFS_GET_FILE_INFO FfsGetFileInfo;
- ///
- /// Return information about a particular volume.
- ///
- EFI_PEI_FFS_GET_VOLUME_INFO FfsGetVolumeInfo;
- ///
- /// Register a driver to be re-loaded when memory is available.
- ///
- EFI_PEI_REGISTER_FOR_SHADOW RegisterForShadow;
+
+ //
+ // PEI Memory Functions
+ //
+ EFI_PEI_INSTALL_PEI_MEMORY InstallPeiMemory;
+ EFI_PEI_ALLOCATE_PAGES AllocatePages;
+ EFI_PEI_ALLOCATE_POOL AllocatePool;
+ EFI_PEI_COPY_MEM CopyMem;
+ EFI_PEI_SET_MEM SetMem;
+
+ //
+ // Status Code
+ //
+ EFI_PEI_REPORT_STATUS_CODE ReportStatusCode;
+
+ //
+ // Reset
+ //
+ EFI_PEI_RESET_SYSTEM ResetSystem;
+
+ //
+ // (the following interfaces are installed by publishing PEIM)
+ // I/O Abstractions
+ //
+ EFI_PEI_CPU_IO_PPI *CpuIo;
+ EFI_PEI_PCI_CFG2_PPI *PciCfg;
+
+ //
+ // Future Installed Services
+ //
+ EFI_PEI_FFS_FIND_BY_NAME FfsFindFileByName;
+ EFI_PEI_FFS_GET_FILE_INFO FfsGetFileInfo;
+ EFI_PEI_FFS_GET_VOLUME_INFO FfsGetVolumeInfo;
+ EFI_PEI_REGISTER_FOR_SHADOW RegisterForShadow;
};
diff --git a/MdePkg/Include/Ppi/CpuIo.h b/MdePkg/Include/Ppi/CpuIo.h index 3966432028..f5ec83c8b0 100644 --- a/MdePkg/Include/Ppi/CpuIo.h +++ b/MdePkg/Include/Ppi/CpuIo.h @@ -383,77 +383,27 @@ VOID /// The perspective of the services is that of the processor, not the bus or system.
///
struct _EFI_PEI_CPU_IO_PPI {
- ///
- /// Collection of memory-access services.
- ///
- EFI_PEI_CPU_IO_PPI_ACCESS Mem;
- ///
- /// Collection of I/O-access services.
- ///
- EFI_PEI_CPU_IO_PPI_ACCESS Io;
- ///
- /// 8-bit I/O read service.
- ///
+ EFI_PEI_CPU_IO_PPI_ACCESS Mem; ///< Collection of memory-access services.
+ EFI_PEI_CPU_IO_PPI_ACCESS Io; ///< Collection of I/O-access services.
+
EFI_PEI_CPU_IO_PPI_IO_READ8 IoRead8;
- ///
- /// 16-bit I/O read service.
- ///
EFI_PEI_CPU_IO_PPI_IO_READ16 IoRead16;
- ///
- /// 32-bit I/O read service.
- ///
EFI_PEI_CPU_IO_PPI_IO_READ32 IoRead32;
- ///
- /// 64-bit I/O read service.
- ///
EFI_PEI_CPU_IO_PPI_IO_READ64 IoRead64;
- ///
- /// 8-bit I/O write service.
- ///
+
EFI_PEI_CPU_IO_PPI_IO_WRITE8 IoWrite8;
- ///
- /// 16-bit I/O write service.
- ///
EFI_PEI_CPU_IO_PPI_IO_WRITE16 IoWrite16;
- ///
- /// 32-bit I/O write service.
- ///
EFI_PEI_CPU_IO_PPI_IO_WRITE32 IoWrite32;
- ///
- /// 64-bit I/O write service.
- ///
EFI_PEI_CPU_IO_PPI_IO_WRITE64 IoWrite64;
- ///
- /// 8-bit memory read service.
- ///
+
EFI_PEI_CPU_IO_PPI_MEM_READ8 MemRead8;
- ///
- /// 16-bit memory read service.
- ///
EFI_PEI_CPU_IO_PPI_MEM_READ16 MemRead16;
- ///
- /// 32-bit memory read service.
- ///
EFI_PEI_CPU_IO_PPI_MEM_READ32 MemRead32;
- ///
- /// 64-bit memory read service.
- ///
EFI_PEI_CPU_IO_PPI_MEM_READ64 MemRead64;
- ///
- /// 8-bit memory write service.
- ///
+
EFI_PEI_CPU_IO_PPI_MEM_WRITE8 MemWrite8;
- ///
- /// 16-bit memory write service.
- ///
EFI_PEI_CPU_IO_PPI_MEM_WRITE16 MemWrite16;
- ///
- /// 32-bit memory write service.
- ///
EFI_PEI_CPU_IO_PPI_MEM_WRITE32 MemWrite32;
- ///
- /// 64-bit memory write service.
- ///
EFI_PEI_CPU_IO_PPI_MEM_WRITE64 MemWrite64;
};
diff --git a/MdePkg/Include/Ppi/Decompress.h b/MdePkg/Include/Ppi/Decompress.h index 074b057928..efd787c3f2 100644 --- a/MdePkg/Include/Ppi/Decompress.h +++ b/MdePkg/Include/Ppi/Decompress.h @@ -65,9 +65,6 @@ EFI_STATUS /// compression sections will be ignored.
///
struct _EFI_PEI_DECOMPRESS_PPI {
- ///
- /// Decompress a single compression section in a firmware file.
- ///
EFI_PEI_DECOMPRESS_DECOMPRESS Decompress;
};
diff --git a/MdePkg/Include/Ppi/DxeIpl.h b/MdePkg/Include/Ppi/DxeIpl.h index 1ea629a011..35fb0aaa68 100644 --- a/MdePkg/Include/Ppi/DxeIpl.h +++ b/MdePkg/Include/Ppi/DxeIpl.h @@ -65,9 +65,6 @@ EFI_STATUS /// The DXE IPL PPI may use PEI services to locate and load the DXE Foundation.
///
struct _EFI_DXE_IPL_PPI {
- ///
- /// The entry point to the DXE IPL PPI.
- ///
EFI_DXE_IPL_ENTRY Entry;
};
diff --git a/MdePkg/Include/Ppi/FirmwareVolume.h b/MdePkg/Include/Ppi/FirmwareVolume.h index 4cb22649d2..be42ac096f 100644 --- a/MdePkg/Include/Ppi/FirmwareVolume.h +++ b/MdePkg/Include/Ppi/FirmwareVolume.h @@ -208,29 +208,11 @@ EFI_STATUS /// This PPI provides functions for accessing a memory-mapped firmware volume of a specific format.
///
struct _EFI_PEI_FIRMWARE_VOLUME_PPI {
- ///
- /// Process a firmware volume and create a volume handle.
- ///
EFI_PEI_FV_PROCESS_FV ProcessVolume;
- ///
- /// Find all files of a specific type.
- ///
EFI_PEI_FV_FIND_FILE_TYPE FindFileByType;
- ///
- /// Find the file with a specific name.
- ///
EFI_PEI_FV_FIND_FILE_NAME FindFileByName;
- ///
- /// Return the information about a specific file.
- ///
EFI_PEI_FV_GET_FILE_INFO GetFileInfo;
- ///
- /// Return the firmware volume attributes.
- ///
EFI_PEI_FV_GET_INFO GetVolumeInfo;
- ///
- /// Find all sections of a specific type.
- ///
EFI_PEI_FV_FIND_SECTION FindSectionByType;
};
diff --git a/MdePkg/Include/Ppi/GuidedSectionExtraction.h b/MdePkg/Include/Ppi/GuidedSectionExtraction.h index b25bbf3253..5170e463f7 100644 --- a/MdePkg/Include/Ppi/GuidedSectionExtraction.h +++ b/MdePkg/Include/Ppi/GuidedSectionExtraction.h @@ -95,10 +95,6 @@ EFI_STATUS /// therein.
///
struct _EFI_PEI_GUIDED_SECTION_EXTRACTION_PPI {
- ///
- /// Takes the GUIDed section as input and
- /// produces the section stream data.
- ///
EFI_PEI_EXTRACT_GUIDED_SECTION ExtractSection;
};
diff --git a/MdePkg/Include/Ppi/LoadFile.h b/MdePkg/Include/Ppi/LoadFile.h index 79cf0cd299..51f71b38b2 100644 --- a/MdePkg/Include/Ppi/LoadFile.h +++ b/MdePkg/Include/Ppi/LoadFile.h @@ -66,9 +66,6 @@ EFI_STATUS /// will use this service to launch the known PEI module images.
///
struct _EFI_PEI_LOAD_FILE_PPI {
- ///
- /// Loads a PEIM into memory for subsequent execution.
- ///
EFI_PEI_LOAD_FILE LoadFile;
};
diff --git a/MdePkg/Include/Ppi/Pcd.h b/MdePkg/Include/Ppi/Pcd.h index aca531f47d..a299aa9b87 100644 --- a/MdePkg/Include/Ppi/Pcd.h +++ b/MdePkg/Include/Ppi/Pcd.h @@ -814,107 +814,9 @@ EFI_STATUS -//
-// Interface structure for the PCD PPI
-//
-/**
- @par Ppi Description:
- This service abstracts the ability to set/get Platform Configuration Database (PCD).
-
- @param SetSku
- Sets the SKU value for subsequent calls to set or get PCD token values.
-
- @param Get8
- Retrieves an 8-bit value for a given PCD token.
-
- @param Get16
- Retrieves an 16-bit value for a given PCD token.
-
- @param Get32
- Retrieves an 32-bit value for a given PCD token.
-
- @param Get64
- Retrieves an 64-bit value for a given PCD token.
-
- @param GetPtr
- Retrieves a pointer to a value for a given PCD token.
-
- @param GetBool
- Retrieves an Boolean value for a given PCD token.
-
- @param GetSize
- Retrieves the size of the value for a given PCD token.
-
- @param Get8Ex
- Retrieves an 8-bit value for a given PCD token and token space.
-
- @param Get16Ex
- Retrieves an 16-bit value for a given PCD token and token space.
-
- @param Get32Ex
- Retrieves an 32-bit value for a given PCD token and token space.
-
- @param Get64Ex
- Retrieves an 64-bit value for a given PCD token and token space.
-
- @param GetPtrEx
- Retrieves a pointer to a value for a given PCD token and token space.
-
- @param GetBoolEx
- Retrieves an Boolean value for a given PCD token and token space.
-
- @param GetSizeEx
- Retrieves the size of the value for a given PCD token and token space.
-
- @param Set8
- Sets an 8-bit value for a given PCD token.
-
- @param Set16
- Sets an 16-bit value for a given PCD token.
-
- @param Set32
- Sets an 32-bit value for a given PCD token.
-
- @param Set64
- Sets an 64-bit value for a given PCD token.
-
- @param SetPtr
- Sets the buffer of a specified size for a given PCD token.
-
- @param SetBool
- Sets an Boolean value for a given PCD token.
-
- @param Set8Ex
- Sets an 8-bit value for a given PCD token and token space.
-
- @param Set16Ex
- Sets an 16-bit value for a given PCD token and token space.
-
- @param Set32Ex
- Sets an 32-bit value for a given PCD token and token space.
-
- @param Set64Ex
- Sets an 64-bit value for a given PCD token and token space.
-
- @param SetPtrEx
- Sets the buffer of a specified size for a given PCD token and token space.
-
- @param SetBoolEx
- Sets an Boolean value for a given PCD token and token space.
-
- @param CallbackOnSet
- Specifies a function to be called anytime the value of a designated token is changed.
-
- @param CancelCallback
- Cancels a previously set callback function for a particular PCD token number.
-
- @param GetNextToken
- Retrieves the next valid PCD token for a given namespace.
-
- @param GetNextTokenSpace
- Retrieves the next valid PCD token namespace for a given namespace.
-
-**/
+///
+/// This service abstracts the ability to set/get Platform Configuration Database (PCD).
+///
typedef struct {
PCD_PPI_SET_SKU SetSku;
diff --git a/MdePkg/Include/Ppi/PciCfg2.h b/MdePkg/Include/Ppi/PciCfg2.h index fbf6fa787d..cf738fe469 100644 --- a/MdePkg/Include/Ppi/PciCfg2.h +++ b/MdePkg/Include/Ppi/PciCfg2.h @@ -153,24 +153,17 @@ EFI_STATUS IN VOID *ClearBits
);
-/**
- @par Ppi Description:
- The EFI_PEI_PCI_CFG_PPI interfaces are used to abstract accesses to PCI
- controllers behind a PCI root bridge controller.
-
- @param Read PCI read services. See the Read() function description.
-
- @param Write PCI write services. See the Write() function description.
-
- @param Modify PCI read-modify-write services. See the Modify() function description.
-
- @param Segment The PCI bus segment which the specified functions will access.
-
-**/
+///
+/// The EFI_PEI_PCI_CFG_PPI interfaces are used to abstract accesses to PCI
+/// controllers behind a PCI root bridge controller.
+///
struct _EFI_PEI_PCI_CFG2_PPI {
EFI_PEI_PCI_CFG2_PPI_IO Read;
EFI_PEI_PCI_CFG2_PPI_IO Write;
EFI_PEI_PCI_CFG2_PPI_RW Modify;
+ ///
+ /// The PCI bus segment which the specified functions will access.
+ ///
UINT16 Segment;
};
diff --git a/MdePkg/Include/Ppi/ReadOnlyVariable2.h b/MdePkg/Include/Ppi/ReadOnlyVariable2.h index 329266a879..44f220e167 100644 --- a/MdePkg/Include/Ppi/ReadOnlyVariable2.h +++ b/MdePkg/Include/Ppi/ReadOnlyVariable2.h @@ -107,13 +107,7 @@ EFI_STATUS /// variable services.
///
struct _EFI_PEI_READ_ONLY_VARIABLE2_PPI {
- ///
- /// A service to read the value of a particular variable using its name.
- ///
EFI_PEI_GET_VARIABLE2 GetVariable;
- ///
- /// Find the next variable name in the variable store.
- ///
EFI_PEI_NEXT_VARIABLE_NAME2 NextVariableName;
};
diff --git a/MdePkg/Include/Ppi/Reset.h b/MdePkg/Include/Ppi/Reset.h index b6d9beab50..5f22d17e4e 100644 --- a/MdePkg/Include/Ppi/Reset.h +++ b/MdePkg/Include/Ppi/Reset.h @@ -39,10 +39,6 @@ /// This PPI provides provide a simple reset service.
///
typedef struct {
- ///
- /// A service to reset the entire platform.
- /// This function is defined in PiPeicis.h.
- ///
EFI_PEI_RESET_SYSTEM ResetSystem;
} EFI_PEI_RESET_PPI;
diff --git a/MdePkg/Include/Ppi/SecPlatformInformation.h b/MdePkg/Include/Ppi/SecPlatformInformation.h index 573939af3d..b0c94f0fe4 100644 --- a/MdePkg/Include/Ppi/SecPlatformInformation.h +++ b/MdePkg/Include/Ppi/SecPlatformInformation.h @@ -156,9 +156,6 @@ EFI_STATUS /// discover where to begin dispatching PEIMs.
///
struct _EFI_SEC_PLATFORM_INFORMATION_PPI {
- ///
- /// Conveys state information out of the SEC phase into PEI.
- ///
EFI_SEC_PLATFORM_INFORMATION PlatformInformation;
};
diff --git a/MdePkg/Include/Ppi/Security2.h b/MdePkg/Include/Ppi/Security2.h index c18da3fd5e..291c1e8801 100644 --- a/MdePkg/Include/Ppi/Security2.h +++ b/MdePkg/Include/Ppi/Security2.h @@ -84,10 +84,6 @@ EFI_STATUS /// trusted.
///
struct _EFI_PEI_SECURITY2_PPI {
- ///
- /// Allows the platform builder to implement a security policy
- /// in response to varying file authentication states.
- ///
EFI_PEI_SECURITY_AUTHENTICATION_STATE AuthenticationState;
};
diff --git a/MdePkg/Include/Ppi/Smbus2.h b/MdePkg/Include/Ppi/Smbus2.h index 1cc546782b..ce58ab310b 100644 --- a/MdePkg/Include/Ppi/Smbus2.h +++ b/MdePkg/Include/Ppi/Smbus2.h @@ -209,23 +209,9 @@ EFI_STATUS /// its SMBus controller and the slave devices attached to it.
///
struct _EFI_PEI_SMBUS2_PPI {
- ///
- /// Executes the SMBus operation to an SMBus slave device.
- ///
EFI_PEI_SMBUS2_PPI_EXECUTE_OPERATION Execute;
- ///
- /// Allows an SMBus 2.0 device(s) to be Address Resolution Protocol (ARP).
- ///
EFI_PEI_SMBUS2_PPI_ARP_DEVICE ArpDevice;
- ///
- /// Allows a PEIM to retrieve the address that was allocated by the SMBus
- /// host controller during enumeration/ARP.
- ///
EFI_PEI_SMBUS2_PPI_GET_ARP_MAP GetArpMap;
- ///
- /// Allows a driver to register for a callback to the SMBus host
- /// controller driver when the bus issues a notification to the bus controller PEIM.
- ///
EFI_PEI_SMBUS2_PPI_NOTIFY Notify;
///
/// Identifier which uniquely identifies this SMBus controller in a system.
diff --git a/MdePkg/Include/Ppi/Stall.h b/MdePkg/Include/Ppi/Stall.h index 710b3b88b2..a31213db80 100644 --- a/MdePkg/Include/Ppi/Stall.h +++ b/MdePkg/Include/Ppi/Stall.h @@ -54,9 +54,7 @@ struct _EFI_PEI_STALL_PPI { /// The resolution in microseconds of the stall services.
///
UINTN Resolution;
- ///
- /// The actual stall procedure call.
- ///
+
EFI_PEI_STALL Stall;
};
diff --git a/MdePkg/Include/Ppi/StatusCode.h b/MdePkg/Include/Ppi/StatusCode.h index 0aa2a558ea..537059bc4a 100644 --- a/MdePkg/Include/Ppi/StatusCode.h +++ b/MdePkg/Include/Ppi/StatusCode.h @@ -36,10 +36,6 @@ /// There can be only one instance of this service in the system.
///
typedef struct {
- ///
- /// Service that allows PEIMs to report status codes.
- /// This function is defined in PiPeicis.h.
- ///
EFI_PEI_REPORT_STATUS_CODE ReportStatusCode;
} EFI_PEI_PROGRESS_CODE_PPI;
diff --git a/MdePkg/Include/Ppi/TemporaryRamSupport.h b/MdePkg/Include/Ppi/TemporaryRamSupport.h index 648127fc22..46169fcaf5 100644 --- a/MdePkg/Include/Ppi/TemporaryRamSupport.h +++ b/MdePkg/Include/Ppi/TemporaryRamSupport.h @@ -53,10 +53,6 @@ EFI_STATUS /// This service abstracts the ability to migrate contents of the platform early memory store.
///
typedef struct {
- ///
- /// Perform the migration of contents of Temporary RAM to Permanent RAM.
- /// Terminate the Temporary RAM if it cannot coexist with the Permanent RAM.
- ///
TEMPORARY_RAM_MIGRATION TemporaryRamMigration;
} TEMPORARY_RAM_SUPPORT_PPI;
diff --git a/MdePkg/Include/Protocol/AbsolutePointer.h b/MdePkg/Include/Protocol/AbsolutePointer.h index 853ce33c9a..e281d6ca82 100644 --- a/MdePkg/Include/Protocol/AbsolutePointer.h +++ b/MdePkg/Include/Protocol/AbsolutePointer.h @@ -176,17 +176,15 @@ EFI_STATUS );
-/**
- @par Protocol Description:
- The EFI_ABSOLUTE_POINTER_PROTOCOL provides a set of services
- for a pointer device that can be used as an input device from an
- application written to this specification. The services include
- the ability to reset the pointer device, retrieve the state of
- the pointer device, and retrieve the capabilities of the pointer
- device. In addition certain data items describing the device are
- provided.
-
-**/
+///
+/// The EFI_ABSOLUTE_POINTER_PROTOCOL provides a set of services
+/// for a pointer device that can be used as an input device from an
+/// application written to this specification. The services include
+/// the ability to reset the pointer device, retrieve the state of
+/// the pointer device, and retrieve the capabilities of the pointer
+/// device. In addition certain data items describing the device are
+/// provided.
+///
struct _EFI_ABSOLUTE_POINTER_PROTOCOL {
EFI_ABSOLUTE_POINTER_RESET Reset;
EFI_ABSOLUTE_POINTER_GET_STATE GetState;
@@ -194,6 +192,9 @@ struct _EFI_ABSOLUTE_POINTER_PROTOCOL { /// Event to use with WaitForEvent() to wait for input from the pointer device.
///
EFI_EVENT WaitForInput;
+ ///
+ /// Pointer to EFI_ABSOLUTE_POINTER_MODE data.
+ ///
EFI_ABSOLUTE_POINTER_MODE *Mode;
};
diff --git a/MdePkg/Include/Protocol/AcpiTable.h b/MdePkg/Include/Protocol/AcpiTable.h index 40376a4014..01583365c0 100644 --- a/MdePkg/Include/Protocol/AcpiTable.h +++ b/MdePkg/Include/Protocol/AcpiTable.h @@ -104,11 +104,10 @@ EFI_STATUS IN UINTN TableKey
);
-/**
- @par Protocol Description:
- The EFI_ACPI_TABLE_PROTOCOL provides the ability for a component
- to install and uninstall ACPI tables from a platform.
-**/
+///
+/// The EFI_ACPI_TABLE_PROTOCOL provides the ability for a component
+/// to install and uninstall ACPI tables from a platform.
+///
struct _EFI_ACPI_TABLE_PROTOCOL {
EFI_ACPI_TABLE_INSTALL_ACPI_TABLE InstallAcpiTable;
EFI_ACPI_TABLE_UNINSTALL_ACPI_TABLE UninstallAcpiTable;
diff --git a/MdePkg/Include/Protocol/Arp.h b/MdePkg/Include/Protocol/Arp.h index efdd4c2f34..edf204ebe3 100644 --- a/MdePkg/Include/Protocol/Arp.h +++ b/MdePkg/Include/Protocol/Arp.h @@ -249,11 +249,10 @@ EFI_STATUS IN EFI_EVENT ResolvedEvent OPTIONAL
);
-/**
- @par Protocol Description:
- ARP is used to resolve local network protocol addresses into
- network hardware addresses.
-**/
+///
+/// ARP is used to resolve local network protocol addresses into
+/// network hardware addresses.
+///
struct _EFI_ARP_PROTOCOL {
EFI_ARP_CONFIGURE Configure;
EFI_ARP_ADD Add;
diff --git a/MdePkg/Include/Protocol/AuthenticationInfo.h b/MdePkg/Include/Protocol/AuthenticationInfo.h index 3b3fd6b33a..d2cd444685 100644 --- a/MdePkg/Include/Protocol/AuthenticationInfo.h +++ b/MdePkg/Include/Protocol/AuthenticationInfo.h @@ -109,11 +109,10 @@ EFI_STATUS IN VOID *Buffer
);
-/**
- @par Protocol Description:
- This protocol is used on any device handle to obtain authentication
- information associated with the physical or logical device.
-**/
+///
+/// This protocol is used on any device handle to obtain authentication
+/// information associated with the physical or logical device.
+///
struct _EFI_AUTHENTICATION_INFO_PROTOCOL {
EFI_AUTHENTICATION_PROTOCOL_INFO_GET Get;
EFI_AUTHENTICATION_PROTOCOL_INFO_SET Set;
diff --git a/MdePkg/Include/Protocol/Bds.h b/MdePkg/Include/Protocol/Bds.h index 0dca932245..d9ef2fd803 100644 --- a/MdePkg/Include/Protocol/Bds.h +++ b/MdePkg/Include/Protocol/Bds.h @@ -55,18 +55,14 @@ VOID IN EFI_BDS_ARCH_PROTOCOL *This
);
-/**
- Interface stucture for the BDS Architectural Protocol.
-
- @par Protocol Description:
- The EFI_BDS_ARCH_PROTOCOL transfers control from DXE to an operating
- system or a system utility. If there are not enough drivers initialized
- when this protocol is used to access the required boot device(s), then
- this protocol should add drivers to the dispatch queue and return control
- back to the dispatcher. Once the required boot devices are available, then
- the boot device can be used to load and invoke an OS or a system utility.
-
-**/
+///
+/// The EFI_BDS_ARCH_PROTOCOL transfers control from DXE to an operating
+/// system or a system utility. If there are not enough drivers initialized
+/// when this protocol is used to access the required boot device(s), then
+/// this protocol should add drivers to the dispatch queue and return control
+/// back to the dispatcher. Once the required boot devices are available, then
+/// the boot device can be used to load and invoke an OS or a system utility.
+///
struct _EFI_BDS_ARCH_PROTOCOL {
EFI_BDS_ENTRY Entry;
};
diff --git a/MdePkg/Include/Protocol/Bis.h b/MdePkg/Include/Protocol/Bis.h index f03452e579..a7c16584f6 100644 --- a/MdePkg/Include/Protocol/Bis.h +++ b/MdePkg/Include/Protocol/Bis.h @@ -397,11 +397,10 @@ EFI_STATUS OUT EFI_BIS_DATA **SignatureInfo
);
-/**
- @par Protocol Description:
- The EFI_BIS_PROTOCOL is used to check a digital signature of a data block against a digital
- certificate for the purpose of an integrity and authorization check.
-**/
+///
+/// The EFI_BIS_PROTOCOL is used to check a digital signature of a data block against a digital
+/// certificate for the purpose of an integrity and authorization check.
+///
struct _EFI_BIS_PROTOCOL {
EFI_BIS_INITIALIZE Initialize;
EFI_BIS_SHUTDOWN Shutdown;
diff --git a/MdePkg/Include/Protocol/BlockIo.h b/MdePkg/Include/Protocol/BlockIo.h index dd3d9c1a15..adbeedc289 100644 --- a/MdePkg/Include/Protocol/BlockIo.h +++ b/MdePkg/Include/Protocol/BlockIo.h @@ -189,10 +189,9 @@ typedef struct { ///
#define EFI_BLOCK_IO_INTERFACE_REVISION EFI_BLOCK_IO_PROTOCOL_REVISION
-/**
- @par Protocol Description:
- This protocol provides control over block devices.
-**/
+///
+/// This protocol provides control over block devices.
+///
struct _EFI_BLOCK_IO_PROTOCOL {
///
/// The revision to which the block IO interface adheres. All future
@@ -200,7 +199,9 @@ struct _EFI_BLOCK_IO_PROTOCOL { /// back wards compatible, it is not the same GUID.
///
UINT64 Revision;
-
+ ///
+ /// Pointer to the EFI_BLOCK_IO_MEDIA data for this device.
+ ///
EFI_BLOCK_IO_MEDIA *Media;
EFI_BLOCK_RESET Reset;
diff --git a/MdePkg/Include/Protocol/BusSpecificDriverOverride.h b/MdePkg/Include/Protocol/BusSpecificDriverOverride.h index 5789a92483..83a87c6711 100644 --- a/MdePkg/Include/Protocol/BusSpecificDriverOverride.h +++ b/MdePkg/Include/Protocol/BusSpecificDriverOverride.h @@ -57,15 +57,11 @@ EFI_STATUS IN OUT EFI_HANDLE *DriverImageHandle
);
-//
-// Interface structure for the Bus Specific Driver Override Protocol
-//
-/**
- @par Protocol Description:
- This protocol matches one or more drivers to a controller. This protocol is produced by a bus driver,
- and it is installed on the child handles of buses that require a bus specific algorithm for matching
- drivers to controllers.
-**/
+///
+/// This protocol matches one or more drivers to a controller. This protocol is produced by a bus driver,
+/// and it is installed on the child handles of buses that require a bus specific algorithm for matching
+/// drivers to controllers.
+///
struct _EFI_BUS_SPECIFIC_DRIVER_OVERRIDE_PROTOCOL {
EFI_BUS_SPECIFIC_DRIVER_OVERRIDE_GET_DRIVER GetDriver;
};
diff --git a/MdePkg/Include/Protocol/ComponentName.h b/MdePkg/Include/Protocol/ComponentName.h index 69c61a619e..1f0f5f1749 100644 --- a/MdePkg/Include/Protocol/ComponentName.h +++ b/MdePkg/Include/Protocol/ComponentName.h @@ -109,14 +109,10 @@ EFI_STATUS OUT CHAR16 **ControllerName
);
-//
-// Interface structure for the Component Name Protocol
-//
-/**
- @par Protocol Description:
- This protocol is used to retrieve user readable names of drivers
- and controllers managed by UEFI Drivers.
-**/
+///
+/// This protocol is used to retrieve user readable names of drivers
+/// and controllers managed by UEFI Drivers.
+///
struct _EFI_COMPONENT_NAME_PROTOCOL {
EFI_COMPONENT_NAME_GET_DRIVER_NAME GetDriverName;
EFI_COMPONENT_NAME_GET_CONTROLLER_NAME GetControllerName;
diff --git a/MdePkg/Include/Protocol/ComponentName2.h b/MdePkg/Include/Protocol/ComponentName2.h index 1ee87e9a75..8da532d6eb 100644 --- a/MdePkg/Include/Protocol/ComponentName2.h +++ b/MdePkg/Include/Protocol/ComponentName2.h @@ -151,14 +151,10 @@ EFI_STATUS OUT CHAR16 **ControllerName
);
-//
-// Interface structure for the Component Name2 Protocol
-//
-/**
- @par Protocol Description:
- This protocol is used to retrieve user readable names of drivers
- and controllers managed by UEFI Drivers.
-**/
+///
+/// This protocol is used to retrieve user readable names of drivers
+/// and controllers managed by UEFI Drivers.
+///
struct _EFI_COMPONENT_NAME2_PROTOCOL {
EFI_COMPONENT_NAME2_GET_DRIVER_NAME GetDriverName;
EFI_COMPONENT_NAME2_GET_CONTROLLER_NAME GetControllerName;
diff --git a/MdePkg/Include/Protocol/Cpu.h b/MdePkg/Include/Protocol/Cpu.h index d8964bdf6c..53ad24d6d5 100644 --- a/MdePkg/Include/Protocol/Cpu.h +++ b/MdePkg/Include/Protocol/Cpu.h @@ -255,13 +255,12 @@ EFI_STATUS );
-/**
- @par Protocol Description:
- The EFI_CPU_ARCH_PROTOCOL is used to abstract processor-specific functions from the DXE
- Foundation. This includes flushing caches, enabling and disabling interrupts, hooking interrupt
- vectors and exception vectors, reading internal processor timers, resetting the processor, and
- determining the processor frequency.
-**/
+///
+/// The EFI_CPU_ARCH_PROTOCOL is used to abstract processor-specific functions from the DXE
+/// Foundation. This includes flushing caches, enabling and disabling interrupts, hooking interrupt
+/// vectors and exception vectors, reading internal processor timers, resetting the processor, and
+/// determining the processor frequency.
+///
struct _EFI_CPU_ARCH_PROTOCOL {
EFI_CPU_FLUSH_DATA_CACHE FlushDataCache;
EFI_CPU_ENABLE_INTERRUPT EnableInterrupt;
diff --git a/MdePkg/Include/Protocol/DebugPort.h b/MdePkg/Include/Protocol/DebugPort.h index e80112744c..13c7db94fa 100644 --- a/MdePkg/Include/Protocol/DebugPort.h +++ b/MdePkg/Include/Protocol/DebugPort.h @@ -113,13 +113,9 @@ EFI_STATUS IN EFI_DEBUGPORT_PROTOCOL *This
);
-//
-// DebugPort protocol definition
-//
-/**
- @par Protocol Description:
- This protocol provides the communication link between the debug agent and the remote host.
-**/
+///
+/// This protocol provides the communication link between the debug agent and the remote host.
+///
struct _EFI_DEBUGPORT_PROTOCOL {
EFI_DEBUGPORT_RESET Reset;
EFI_DEBUGPORT_WRITE Write;
diff --git a/MdePkg/Include/Protocol/DebugSupport.h b/MdePkg/Include/Protocol/DebugSupport.h index 450d6f04ae..b6a551addd 100644 --- a/MdePkg/Include/Protocol/DebugSupport.h +++ b/MdePkg/Include/Protocol/DebugSupport.h @@ -613,16 +613,15 @@ EFI_STATUS IN UINT64 Length
);
-//
-// DebugSupport protocol definition
-//
-/**
- @par Protocol Description:
- This protocol provides the services to allow the debug agent to register
- callback functions that are called either periodically or when specific
- processor exceptions occur.
-**/
+///
+/// This protocol provides the services to allow the debug agent to register
+/// callback functions that are called either periodically or when specific
+/// processor exceptions occur.
+///
struct _EFI_DEBUG_SUPPORT_PROTOCOL {
+ ///
+ /// Declares the processor architecture for this instance of the EFI Debug Support protocol.
+ ///
EFI_INSTRUCTION_SET_ARCHITECTURE Isa;
EFI_GET_MAXIMUM_PROCESSOR_INDEX GetMaximumProcessorIndex;
EFI_REGISTER_PERIODIC_CALLBACK RegisterPeriodicCallback;
diff --git a/MdePkg/Include/Protocol/Decompress.h b/MdePkg/Include/Protocol/Decompress.h index 5b2291f177..b5a0668982 100644 --- a/MdePkg/Include/Protocol/Decompress.h +++ b/MdePkg/Include/Protocol/Decompress.h @@ -109,11 +109,9 @@ EFI_STATUS IN UINT32 ScratchSize
);
-/**
- @par Protocol Description:
- Provides a decompression service.
-
-**/
+///
+/// Provides a decompression service.
+///
struct _EFI_DECOMPRESS_PROTOCOL {
EFI_DECOMPRESS_GET_INFO GetInfo;
EFI_DECOMPRESS_DECOMPRESS Decompress;
diff --git a/MdePkg/Include/Protocol/DeviceIo.h b/MdePkg/Include/Protocol/DeviceIo.h index 6ae0c23884..f2dd067bb7 100644 --- a/MdePkg/Include/Protocol/DeviceIo.h +++ b/MdePkg/Include/Protocol/DeviceIo.h @@ -213,11 +213,10 @@ EFI_STATUS IN EFI_PHYSICAL_ADDRESS HostAddress
);
-/**
- @par Protocol Description:
- This protocol provides the basic Memory, I/O, and PCI interfaces that
- are used to abstract accesses to devices.
-**/
+///
+/// This protocol provides the basic Memory, I/O, and PCI interfaces that
+/// are used to abstract accesses to devices.
+///
struct _EFI_DEVICE_IO_PROTOCOL {
///
/// Allows reads and writes to memory mapped I/O space.
diff --git a/MdePkg/Include/Protocol/DevicePathFromText.h b/MdePkg/Include/Protocol/DevicePathFromText.h index 327c5e27a3..ffac715978 100644 --- a/MdePkg/Include/Protocol/DevicePathFromText.h +++ b/MdePkg/Include/Protocol/DevicePathFromText.h @@ -61,10 +61,9 @@ EFI_DEVICE_PATH_PROTOCOL* IN CONST CHAR16 *TextDevicePath
);
-/**
- @par Protocol Description:
- This protocol converts text to device paths and device nodes.
-**/
+///
+/// This protocol converts text to device paths and device nodes.
+///
typedef struct {
EFI_DEVICE_PATH_FROM_TEXT_NODE ConvertTextToDeviceNode;
EFI_DEVICE_PATH_FROM_TEXT_PATH ConvertTextToDevicePath;
diff --git a/MdePkg/Include/Protocol/DevicePathToText.h b/MdePkg/Include/Protocol/DevicePathToText.h index 853e43e133..4767e08c93 100644 --- a/MdePkg/Include/Protocol/DevicePathToText.h +++ b/MdePkg/Include/Protocol/DevicePathToText.h @@ -72,10 +72,9 @@ CHAR16* IN BOOLEAN AllowShortcuts
);
-/**
- @par Protocol Description:
- This protocol converts device paths and device nodes to text.
-**/
+///
+/// This protocol converts device paths and device nodes to text.
+///
typedef struct {
EFI_DEVICE_PATH_TO_TEXT_NODE ConvertDeviceNodeToText;
EFI_DEVICE_PATH_TO_TEXT_PATH ConvertDevicePathToText;
diff --git a/MdePkg/Include/Protocol/DevicePathUtilities.h b/MdePkg/Include/Protocol/DevicePathUtilities.h index 8d98add591..cf247d24ba 100644 --- a/MdePkg/Include/Protocol/DevicePathUtilities.h +++ b/MdePkg/Include/Protocol/DevicePathUtilities.h @@ -170,10 +170,9 @@ BOOLEAN IN CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath
);
-/**
- @par Protocol Description:
- This protocol is used to creates and manipulates device paths and device nodes.
-**/
+///
+/// This protocol is used to creates and manipulates device paths and device nodes.
+///
typedef struct {
EFI_DEVICE_PATH_UTILS_GET_DEVICE_PATH_SIZE GetDevicePathSize;
EFI_DEVICE_PATH_UTILS_DUP_DEVICE_PATH DuplicateDevicePath;
diff --git a/MdePkg/Include/Protocol/Dhcp4.h b/MdePkg/Include/Protocol/Dhcp4.h index f59e9d74c5..cefa8de73a 100644 --- a/MdePkg/Include/Protocol/Dhcp4.h +++ b/MdePkg/Include/Protocol/Dhcp4.h @@ -411,11 +411,10 @@ EFI_STATUS OUT EFI_DHCP4_PACKET_OPTION *PacketOptionList[] OPTIONAL
);
-/**
- @par Protocol Description:
- This protocol is used to collect configuration information for the EFI IPv4 Protocol drivers
- and to provide DHCPv4 server and PXE boot server discovery services.
-**/
+///
+/// This protocol is used to collect configuration information for the EFI IPv4 Protocol drivers
+/// and to provide DHCPv4 server and PXE boot server discovery services.
+///
struct _EFI_DHCP4_PROTOCOL {
EFI_DHCP4_GET_MODE_DATA GetModeData;
EFI_DHCP4_CONFIGURE Configure;
diff --git a/MdePkg/Include/Protocol/DiskIo.h b/MdePkg/Include/Protocol/DiskIo.h index 23c7258434..75978d18bf 100644 --- a/MdePkg/Include/Protocol/DiskIo.h +++ b/MdePkg/Include/Protocol/DiskIo.h @@ -98,10 +98,9 @@ EFI_STATUS ///
#define EFI_DISK_IO_INTERFACE_REVISION EFI_DISK_IO_PROTOCOL_REVISION
-/**
- @par Protocol Description:
- This protocol is used to abstract Block I/O interfaces.
-**/
+///
+/// This protocol is used to abstract Block I/O interfaces.
+///
struct _EFI_DISK_IO_PROTOCOL {
///
/// The revision to which the disk I/O interface adheres. All future
diff --git a/MdePkg/Include/Protocol/DriverBinding.h b/MdePkg/Include/Protocol/DriverBinding.h index 43fc16593b..9377891519 100644 --- a/MdePkg/Include/Protocol/DriverBinding.h +++ b/MdePkg/Include/Protocol/DriverBinding.h @@ -108,14 +108,10 @@ EFI_STATUS IN EFI_HANDLE *ChildHandleBuffer OPTIONAL
);
-//
-// Interface structure for the ControllerHandle Driver Protocol
-//
-/**
- @par Protocol Description:
- This protocol provides the services required to determine if a driver supports a given controller.
- If a controller is supported, then it also provides routines to start and stop the controller.
-**/
+///
+/// This protocol provides the services required to determine if a driver supports a given controller.
+/// If a controller is supported, then it also provides routines to start and stop the controller.
+///
struct _EFI_DRIVER_BINDING_PROTOCOL {
EFI_DRIVER_BINDING_SUPPORTED Supported;
EFI_DRIVER_BINDING_START Start;
diff --git a/MdePkg/Include/Protocol/DriverConfiguration.h b/MdePkg/Include/Protocol/DriverConfiguration.h index 172b61ef0c..547fd8e557 100644 --- a/MdePkg/Include/Protocol/DriverConfiguration.h +++ b/MdePkg/Include/Protocol/DriverConfiguration.h @@ -146,13 +146,9 @@ EFI_STATUS );
-/**
- Interface structure for the Driver Configuration Protocol.
-
- @par Protocol Description:
- Used to set configuration options for a controller that an EFI Driver is managing.
-
-**/
+///
+/// Used to set configuration options for a controller that an EFI Driver is managing.
+///
struct _EFI_DRIVER_CONFIGURATION_PROTOCOL {
EFI_DRIVER_CONFIGURATION_SET_OPTIONS SetOptions;
EFI_DRIVER_CONFIGURATION_OPTIONS_VALID OptionsValid;
diff --git a/MdePkg/Include/Protocol/DriverConfiguration2.h b/MdePkg/Include/Protocol/DriverConfiguration2.h index 30b9d7ff98..e1597437a9 100644 --- a/MdePkg/Include/Protocol/DriverConfiguration2.h +++ b/MdePkg/Include/Protocol/DriverConfiguration2.h @@ -155,12 +155,9 @@ EFI_STATUS OUT EFI_DRIVER_CONFIGURATION_ACTION_REQUIRED *ActionRequired
);
-/**
- Interface structure for the Driver Configuration Protocol.
-
- @par Protocol Description:
- Used to set configuration options for a controller that an EFI Driver is managing.
-**/
+///
+/// Used to set configuration options for a controller that an EFI Driver is managing.
+///
struct _EFI_DRIVER_CONFIGURATION2_PROTOCOL {
EFI_DRIVER_CONFIGURATION2_SET_OPTIONS SetOptions;
EFI_DRIVER_CONFIGURATION2_OPTIONS_VALID OptionsValid;
diff --git a/MdePkg/Include/Protocol/DriverDiagnostics.h b/MdePkg/Include/Protocol/DriverDiagnostics.h index 1bd2383dd3..87d077f234 100644 --- a/MdePkg/Include/Protocol/DriverDiagnostics.h +++ b/MdePkg/Include/Protocol/DriverDiagnostics.h @@ -97,12 +97,9 @@ EFI_STATUS OUT CHAR16 **Buffer
);
-/**
- Interface structure for the Driver Diagnostics Protocol.
-
- @par Protocol Description:
- Used to perform diagnostics on a controller that an EFI Driver is managing.
-**/
+///
+/// Used to perform diagnostics on a controller that an EFI Driver is managing.
+///
struct _EFI_DRIVER_DIAGNOSTICS_PROTOCOL {
EFI_DRIVER_DIAGNOSTICS_RUN_DIAGNOSTICS RunDiagnostics;
///
diff --git a/MdePkg/Include/Protocol/DriverDiagnostics2.h b/MdePkg/Include/Protocol/DriverDiagnostics2.h index f8bd6206b2..a3798b1e54 100644 --- a/MdePkg/Include/Protocol/DriverDiagnostics2.h +++ b/MdePkg/Include/Protocol/DriverDiagnostics2.h @@ -91,12 +91,9 @@ EFI_STATUS OUT CHAR16 **Buffer
);
-/**
- Interface structure for the Driver Diagnostics2 Protocol.
-
- @par Protocol Description:
- Used to perform diagnostics on a controller that an EFI Driver is managing.
-**/
+///
+/// Used to perform diagnostics on a controller that an EFI Driver is managing.
+///
struct _EFI_DRIVER_DIAGNOSTICS2_PROTOCOL {
EFI_DRIVER_DIAGNOSTICS2_RUN_DIAGNOSTICS RunDiagnostics;
///
diff --git a/MdePkg/Include/Protocol/DriverFamilyOverride.h b/MdePkg/Include/Protocol/DriverFamilyOverride.h index 270481266a..92fc1d9bdd 100644 --- a/MdePkg/Include/Protocol/DriverFamilyOverride.h +++ b/MdePkg/Include/Protocol/DriverFamilyOverride.h @@ -46,22 +46,17 @@ UINT32 IN EFI_DRIVER_FAMILY_OVERRIDE_PROTOCOL *This
);
-/**
- @par Protocol Description:
- When installed, the Driver Family Override Protocol produces a GUID that represets
- a family of drivers. Drivers with the same GUID are members of the same family
- When drivers are connected to controllers, drivers with a higher revision value
- in the same driver family are connected with a higher priority than drivers
- with a lower revision value in the same driver family. The EFI Boot Service
- Connect Controller uses five rules to build a prioritied list of drivers when
- a request is made to connect a driver to a controller. The Driver Family Protocol
- rule is between the Platform Specific Driver Override Protocol and above the
- Bus Specific Driver Override Protocol.
-
- @param GetVersion
- This function returns the version value associated with the driver specified by This.
-
-**/
+///
+/// When installed, the Driver Family Override Protocol produces a GUID that represets
+/// a family of drivers. Drivers with the same GUID are members of the same family
+/// When drivers are connected to controllers, drivers with a higher revision value
+/// in the same driver family are connected with a higher priority than drivers
+/// with a lower revision value in the same driver family. The EFI Boot Service
+/// Connect Controller uses five rules to build a prioritied list of drivers when
+/// a request is made to connect a driver to a controller. The Driver Family Protocol
+/// rule is between the Platform Specific Driver Override Protocol and above the
+/// Bus Specific Driver Override Protocol.
+///
struct _EFI_DRIVER_FAMILY_OVERRIDE_PROTOCOL {
EFI_DRIVER_FAMILY_OVERRIDE_GET_VERSION GetVersion;
};
diff --git a/MdePkg/Include/Protocol/DriverSupportedEfiVersion.h b/MdePkg/Include/Protocol/DriverSupportedEfiVersion.h index 3592198cf7..d465a3a2f6 100644 --- a/MdePkg/Include/Protocol/DriverSupportedEfiVersion.h +++ b/MdePkg/Include/Protocol/DriverSupportedEfiVersion.h @@ -22,14 +22,13 @@ { 0x5c198761, 0x16a8, 0x4e69, { 0x97, 0x2c, 0x89, 0xd6, 0x79, 0x54, 0xf8, 0x1d } }
-/**
- @par Protocol Description:
- The EFI_DRIVER_SUPPORTED_EFI_VERSION_PROTOCOL provides a
- mechanism for an EFI driver to publish the version of the EFI
- specification it conforms to. This protocol must be placed on
- the drivers image handle when the driver's entry point is
- called.
-**/
+///
+/// The EFI_DRIVER_SUPPORTED_EFI_VERSION_PROTOCOL provides a
+/// mechanism for an EFI driver to publish the version of the EFI
+/// specification it conforms to. This protocol must be placed on
+/// the drivers image handle when the driver's entry point is
+/// called.
+///
typedef struct _EFI_DRIVER_SUPPORTED_EFI_VERSION_PROTOCOL {
///
/// The size, in bytes, of the entire structure. Future versions of this
diff --git a/MdePkg/Include/Protocol/Ebc.h b/MdePkg/Include/Protocol/Ebc.h index 9229590e77..b67cda97c0 100644 --- a/MdePkg/Include/Protocol/Ebc.h +++ b/MdePkg/Include/Protocol/Ebc.h @@ -133,18 +133,12 @@ EFI_STATUS IN OUT UINT64 *Version
);
-//
-// Prototype for the actual EBC protocol interface
-//
-/**
- This protocol provides the services that allow execution of EBC images.
-
- @par Protocol Description:
- The EFI EBC protocol provides services to load and execute EBC images, which will typically be
- loaded into option ROMs. The image loader will load the EBC image, perform standard relocations,
- and invoke the CreateThunk() service to create a thunk for the EBC image's entry point. The
- image can then be run using the standard EFI start image services.
-**/
+///
+/// The EFI EBC protocol provides services to load and execute EBC images, which will typically be
+/// loaded into option ROMs. The image loader will load the EBC image, perform standard relocations,
+/// and invoke the CreateThunk() service to create a thunk for the EBC image's entry point. The
+/// image can then be run using the standard EFI start image services.
+///
struct _EFI_EBC_PROTOCOL {
EFI_EBC_CREATE_THUNK CreateThunk;
EFI_EBC_UNLOAD_IMAGE UnloadImage;
diff --git a/MdePkg/Include/Protocol/EdidActive.h b/MdePkg/Include/Protocol/EdidActive.h index d593260342..81299a3d27 100644 --- a/MdePkg/Include/Protocol/EdidActive.h +++ b/MdePkg/Include/Protocol/EdidActive.h @@ -22,13 +22,12 @@ 0xbd8c1056, 0x9f36, 0x44ec, {0x92, 0xa8, 0xa6, 0x33, 0x7f, 0x81, 0x79, 0x86 } \
}
-/**
- @par Protocol Description:
- This protocol contains the EDID information for an active video output device. This is either the
- EDID information retrieved from the EFI_EDID_OVERRIDE_PROTOCOL if an override is
- available, or an identical copy of the EDID information from the
- EFI_EDID_DISCOVERED_PROTOCOL if no overrides are available.
-**/
+///
+/// This protocol contains the EDID information for an active video output device. This is either the
+/// EDID information retrieved from the EFI_EDID_OVERRIDE_PROTOCOL if an override is
+/// available, or an identical copy of the EDID information from the
+/// EFI_EDID_DISCOVERED_PROTOCOL if no overrides are available.
+///
typedef struct {
///
/// The size, in bytes, of the Edid buffer. 0 if no EDID information
diff --git a/MdePkg/Include/Protocol/EdidDiscovered.h b/MdePkg/Include/Protocol/EdidDiscovered.h index c1eafae8af..dedefa0762 100644 --- a/MdePkg/Include/Protocol/EdidDiscovered.h +++ b/MdePkg/Include/Protocol/EdidDiscovered.h @@ -23,10 +23,9 @@ 0x1c0c34f6, 0xd380, 0x41fa, {0xa0, 0x49, 0x8a, 0xd0, 0x6c, 0x1a, 0x66, 0xaa } \
}
-/**
- @par Protocol Description:
- This protocol contains the EDID information retrieved from a video output device.
-**/
+///
+/// This protocol contains the EDID information retrieved from a video output device.
+///
typedef struct {
///
/// The size, in bytes, of the Edid buffer. 0 if no EDID information
diff --git a/MdePkg/Include/Protocol/EdidOverride.h b/MdePkg/Include/Protocol/EdidOverride.h index 9107d5476b..27f42f1154 100644 --- a/MdePkg/Include/Protocol/EdidOverride.h +++ b/MdePkg/Include/Protocol/EdidOverride.h @@ -54,15 +54,11 @@ EFI_STATUS IN OUT UINT8 **Edid
);
-/**
- @par Protocol Description:
- This protocol is produced by the platform to allow the platform to provide
- EDID information to the producer of the Graphics Output protocol.
-**/
+///
+/// This protocol is produced by the platform to allow the platform to provide
+/// EDID information to the producer of the Graphics Output protocol.
+///
struct _EFI_EDID_OVERRIDE_PROTOCOL {
- ///
- /// Returns EDID values and attributes that the Video BIOS must use.
- ///
EFI_EDID_OVERRIDE_PROTOCOL_GET_EDID GetEdid;
};
diff --git a/MdePkg/Include/Protocol/FirmwareVolume2.h b/MdePkg/Include/Protocol/FirmwareVolume2.h index 62218d7149..0d5e5481fb 100644 --- a/MdePkg/Include/Protocol/FirmwareVolume2.h +++ b/MdePkg/Include/Protocol/FirmwareVolume2.h @@ -705,20 +705,19 @@ EFI_STATUS );
-/**
- @par Protocol Description:
- The Firmware Volume Protocol contains the file-level
- abstraction to the firmware volume as well as some firmware
- volume attribute reporting and configuration services. The
- Firmware Volume Protocol is the interface used by all parts of
- DXE that are not directly involved with managing the firmware
- volume itself. This abstraction allows many varied types of
- firmware volume implementations. A firmware volume may be a
- flash device or it may be a file in the UEFI system partition,
- for example. This level of firmware volume implementation
- detail is not visible to the consumers of the Firmware Volume
- Protocol.
-**/
+///
+/// The Firmware Volume Protocol contains the file-level
+/// abstraction to the firmware volume as well as some firmware
+/// volume attribute reporting and configuration services. The
+/// Firmware Volume Protocol is the interface used by all parts of
+/// DXE that are not directly involved with managing the firmware
+/// volume itself. This abstraction allows many varied types of
+/// firmware volume implementations. A firmware volume may be a
+/// flash device or it may be a file in the UEFI system partition,
+/// for example. This level of firmware volume implementation
+/// detail is not visible to the consumers of the Firmware Volume
+/// Protocol.
+///
struct _EFI_FIRMWARE_VOLUME2_PROTOCOL {
EFI_FV_GET_ATTRIBUTES GetVolumeAttributes;
EFI_FV_SET_ATTRIBUTES SetVolumeAttributes;
diff --git a/MdePkg/Include/Protocol/FirmwareVolumeBlock.h b/MdePkg/Include/Protocol/FirmwareVolumeBlock.h index ab996778d7..d44f615584 100644 --- a/MdePkg/Include/Protocol/FirmwareVolumeBlock.h +++ b/MdePkg/Include/Protocol/FirmwareVolumeBlock.h @@ -328,30 +328,15 @@ EFI_STATUS ...
);
-/**
- @par Protocol Description:
- The Firmware Volume Block Protocol is the low-level interface
- to a firmware volume. File-level access to a firmware volume
- should not be done using the Firmware Volume Block Protocol.
- Normal access to a firmware volume must use the Firmware
- Volume Protocol. Typically, only the file system driver that
- produces the Firmware Volume Protocol will bind to the
- Firmware Volume Block Protocol. The Firmware Volume Block
- Protocol provides the following:
- - Byte-level read/write functionality.
- - Block-level erase functionality.
- - It further exposes device-hardening features, such as may be
- equired to protect the firmware from unwanted overwriting
- and/or erasure.
- - It is useful to layer a file system driver on top of the
- Firmware Volume Block Protocol.
-
- This file system driver produces the Firmware Volume Protocol,
- which provides file-level access to a firmware volume. The
- Firmware Volume Protocol abstracts the file system that is
- used to format the firmware volume and the hardware
- device-hardening features that may be present.
-**/
+///
+/// The Firmware Volume Block Protocol is the low-level interface
+/// to a firmware volume. File-level access to a firmware volume
+/// should not be done using the Firmware Volume Block Protocol.
+/// Normal access to a firmware volume must use the Firmware
+/// Volume Protocol. Typically, only the file system driver that
+/// produces the Firmware Volume Protocol will bind to the
+/// Firmware Volume Block Protocol.
+///
struct _EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL {
EFI_FVB_GET_ATTRIBUTES GetAttributes;
EFI_FVB_SET_ATTRIBUTES SetAttributes;
diff --git a/MdePkg/Include/Protocol/FormBrowser2.h b/MdePkg/Include/Protocol/FormBrowser2.h index 3dc8fa2116..9cb3f9657c 100644 --- a/MdePkg/Include/Protocol/FormBrowser2.h +++ b/MdePkg/Include/Protocol/FormBrowser2.h @@ -157,11 +157,10 @@ EFI_STATUS IN CONST CHAR16 *VariableName OPTIONAL
);
-/**
- @par Protocol Description:
- This interface will allow the caller to direct the configuration
- driver to use either the HII database or use the passed-in packet of data.
-**/
+///
+/// This interface will allow the caller to direct the configuration
+/// driver to use either the HII database or use the passed-in packet of data.
+///
struct _EFI_FORM_BROWSER2_PROTOCOL {
EFI_SEND_FORM2 SendForm;
EFI_BROWSER_CALLBACK2 BrowserCallback;
diff --git a/MdePkg/Include/Protocol/GraphicsOutput.h b/MdePkg/Include/Protocol/GraphicsOutput.h index d8ac161570..8e701c21ca 100644 --- a/MdePkg/Include/Protocol/GraphicsOutput.h +++ b/MdePkg/Include/Protocol/GraphicsOutput.h @@ -190,16 +190,18 @@ typedef struct { UINTN FrameBufferSize;
} EFI_GRAPHICS_OUTPUT_PROTOCOL_MODE;
-/**
- @par Protocol Description:
- Provides a basic abstraction to set video modes and copy pixels to and from
- the graphics controller's frame buffer. The linear address of the hardware
- frame buffer is also exposed so software can write directly to the video hardware.
-**/
+///
+/// Provides a basic abstraction to set video modes and copy pixels to and from
+/// the graphics controller's frame buffer. The linear address of the hardware
+/// frame buffer is also exposed so software can write directly to the video hardware.
+///
struct _EFI_GRAPHICS_OUTPUT_PROTOCOL {
EFI_GRAPHICS_OUTPUT_PROTOCOL_QUERY_MODE QueryMode;
EFI_GRAPHICS_OUTPUT_PROTOCOL_SET_MODE SetMode;
EFI_GRAPHICS_OUTPUT_PROTOCOL_BLT Blt;
+ ///
+ /// Pointer to EFI_GRAPHICS_OUTPUT_PROTOCOL_MODE data.
+ ///
EFI_GRAPHICS_OUTPUT_PROTOCOL_MODE *Mode;
};
diff --git a/MdePkg/Include/Protocol/GuidedSectionExtraction.h b/MdePkg/Include/Protocol/GuidedSectionExtraction.h index 23f87545c8..adeecc043c 100644 --- a/MdePkg/Include/Protocol/GuidedSectionExtraction.h +++ b/MdePkg/Include/Protocol/GuidedSectionExtraction.h @@ -126,14 +126,13 @@ EFI_STATUS );
-/**
- @par Protocol Description:
- Typically, protocol interface structures are identified by associating them with a GUID. Each
- instance of a protocol with a given GUID must have the same interface structure. While all instances
- of the GUIDed Section Extraction Protocol must have the same interface structure, they do not all
- have the same GUID. The GUID that is associated with an instance of the GUIDed Section
- Extraction Protocol is used to correlate it with the GUIDed section type that it is intended to process.
-**/
+///
+/// Typically, protocol interface structures are identified by associating them with a GUID. Each
+/// instance of a protocol with a given GUID must have the same interface structure. While all instances
+/// of the GUIDed Section Extraction Protocol must have the same interface structure, they do not all
+/// have the same GUID. The GUID that is associated with an instance of the GUIDed Section
+/// Extraction Protocol is used to correlate it with the GUIDed section type that it is intended to process.
+///
struct _EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL {
EFI_EXTRACT_GUIDED_SECTION ExtractSection;
};
diff --git a/MdePkg/Include/Protocol/Hash.h b/MdePkg/Include/Protocol/Hash.h index 1467235b1b..fe8c9011a0 100644 --- a/MdePkg/Include/Protocol/Hash.h +++ b/MdePkg/Include/Protocol/Hash.h @@ -128,11 +128,10 @@ EFI_STATUS IN OUT EFI_HASH_OUTPUT *Hash
);
-/**
- @par Protocol Description:
- This protocol allows creating a hash of an arbitrary message digest
- using one or more hash algorithms.
-**/
+///
+/// This protocol allows creating a hash of an arbitrary message digest
+/// using one or more hash algorithms.
+///
struct _EFI_HASH_PROTOCOL {
EFI_HASH_GET_HASH_SIZE GetHashSize;
EFI_HASH_HASH Hash;
diff --git a/MdePkg/Include/Protocol/HiiConfigAccess.h b/MdePkg/Include/Protocol/HiiConfigAccess.h index fbe0315a7c..0f89f63808 100644 --- a/MdePkg/Include/Protocol/HiiConfigAccess.h +++ b/MdePkg/Include/Protocol/HiiConfigAccess.h @@ -199,12 +199,11 @@ EFI_STATUS )
;
-/**
- @par Protocol Description:
- This protocol provides a callable interface between the HII and
- drivers. Only drivers which provide IFR data to HII are required
- to publish this protocol.
-**/
+///
+/// This protocol provides a callable interface between the HII and
+/// drivers. Only drivers which provide IFR data to HII are required
+/// to publish this protocol.
+///
struct _EFI_HII_CONFIG_ACCESS_PROTOCOL {
EFI_HII_ACCESS_EXTRACT_CONFIG ExtractConfig;
EFI_HII_ACCESS_ROUTE_CONFIG RouteConfig;
diff --git a/MdePkg/Include/Protocol/HiiConfigRouting.h b/MdePkg/Include/Protocol/HiiConfigRouting.h index 93ff5d085c..adaefb2fc6 100644 --- a/MdePkg/Include/Protocol/HiiConfigRouting.h +++ b/MdePkg/Include/Protocol/HiiConfigRouting.h @@ -390,12 +390,11 @@ EFI_STATUS OUT EFI_STRING *AltCfgResp
);
-/**
- @par Protocol Description:
- This protocol defines the configuration routing interfaces
- between external applications and the HII. There may only be one
- instance of this protocol in the system.
-**/
+///
+/// This protocol defines the configuration routing interfaces
+/// between external applications and the HII. There may only be one
+/// instance of this protocol in the system.
+///
struct _EFI_HII_CONFIG_ROUTING_PROTOCOL {
EFI_HII_ROUTING_EXTRACT_CONFIG ExtractConfig;
EFI_HII_ROUTING_EXPORT_CONFIG ExportConfig;
diff --git a/MdePkg/Include/Protocol/HiiDatabase.h b/MdePkg/Include/Protocol/HiiDatabase.h index 7ccc9250c5..b94323fc76 100644 --- a/MdePkg/Include/Protocol/HiiDatabase.h +++ b/MdePkg/Include/Protocol/HiiDatabase.h @@ -491,10 +491,9 @@ EFI_STATUS OUT EFI_HANDLE *DriverHandle
);
-/**
- @par Protocol Description:
- Database manager for HII-related data structures.
-**/
+///
+/// Database manager for HII-related data structures.
+///
struct _EFI_HII_DATABASE_PROTOCOL {
EFI_HII_DATABASE_NEW_PACK NewPackageList;
EFI_HII_DATABASE_REMOVE_PACK RemovePackageList;
diff --git a/MdePkg/Include/Protocol/HiiFont.h b/MdePkg/Include/Protocol/HiiFont.h index 02cab77ba3..dd19f29012 100644 --- a/MdePkg/Include/Protocol/HiiFont.h +++ b/MdePkg/Include/Protocol/HiiFont.h @@ -479,10 +479,9 @@ EFI_STATUS IN CONST EFI_STRING String OPTIONAL
);
-/**
- @par Protocol Description:
- The protocol provides the service to retrieve the font informations.
-**/
+///
+/// The protocol provides the service to retrieve the font informations.
+///
struct _EFI_HII_FONT_PROTOCOL {
EFI_HII_STRING_TO_IMAGE StringToImage;
EFI_HII_STRING_ID_TO_IMAGE StringIdToImage;
diff --git a/MdePkg/Include/Protocol/HiiImage.h b/MdePkg/Include/Protocol/HiiImage.h index 5e65aa3db7..624b354134 100644 --- a/MdePkg/Include/Protocol/HiiImage.h +++ b/MdePkg/Include/Protocol/HiiImage.h @@ -336,10 +336,9 @@ IN UINTN BltY );
-/**
- @par Protocol Description:
- Services to access to images in the images database.
-**/
+///
+/// Services to access to images in the images database.
+///
struct _EFI_HII_IMAGE_PROTOCOL {
EFI_HII_NEW_IMAGE NewImage;
EFI_HII_GET_IMAGE GetImage;
diff --git a/MdePkg/Include/Protocol/HiiString.h b/MdePkg/Include/Protocol/HiiString.h index 79dc934acb..406c6fa22d 100644 --- a/MdePkg/Include/Protocol/HiiString.h +++ b/MdePkg/Include/Protocol/HiiString.h @@ -214,10 +214,9 @@ EFI_STATUS );
-/**
- @par Protocol Description:
- Services to manipulate the string.
-**/
+///
+/// Services to manipulate the string.
+///
struct _EFI_HII_STRING_PROTOCOL {
EFI_HII_NEW_STRING NewString;
EFI_HII_GET_STRING GetString;
diff --git a/MdePkg/Include/Protocol/IScsiInitiatorName.h b/MdePkg/Include/Protocol/IScsiInitiatorName.h index 8982739fd9..afa72b51de 100644 --- a/MdePkg/Include/Protocol/IScsiInitiatorName.h +++ b/MdePkg/Include/Protocol/IScsiInitiatorName.h @@ -71,10 +71,9 @@ typedef EFI_STATUS IN VOID *Buffer
);
-/**
- @par Protocol Description:
- iSCSI Initiator Name Protocol for setting and obtaining the iSCSI Initiator Name.
-**/
+///
+/// iSCSI Initiator Name Protocol for setting and obtaining the iSCSI Initiator Name.
+///
struct _EFI_ISCSI_INITIATOR_NAME_PROTOCOL {
EFI_ISCSI_INITIATOR_NAME_GET Get;
EFI_ISCSI_INITIATOR_NAME_SET Set;
diff --git a/MdePkg/Include/Protocol/Ip4.h b/MdePkg/Include/Protocol/Ip4.h index df6fd03cd5..4b3cd027b7 100644 --- a/MdePkg/Include/Protocol/Ip4.h +++ b/MdePkg/Include/Protocol/Ip4.h @@ -394,11 +394,10 @@ EFI_STATUS IN EFI_IP4_PROTOCOL *This
);
-/**
- @par Protocol Description:
- The EFI IPv4 Protocol implements a simple packet-oriented interface that can be
- used by drivers, daemons, and applications to transmit and receive network packets.
-**/
+///
+/// The EFI IPv4 Protocol implements a simple packet-oriented interface that can be
+/// used by drivers, daemons, and applications to transmit and receive network packets.
+///
struct _EFI_IP4_PROTOCOL {
EFI_IP4_GET_MODE_DATA GetModeData;
EFI_IP4_CONFIGURE Configure;
diff --git a/MdePkg/Include/Protocol/Ip4Config.h b/MdePkg/Include/Protocol/Ip4Config.h index 4dfe98b4c8..1871489d30 100644 --- a/MdePkg/Include/Protocol/Ip4Config.h +++ b/MdePkg/Include/Protocol/Ip4Config.h @@ -110,11 +110,10 @@ EFI_STATUS OUT EFI_IP4_IPCONFIG_DATA *IpConfigData OPTIONAL
);
-/**
- @par Protocol Description:
- The EFI_IP4_CONFIG_PROTOCOL driver performs platform- and policy-dependent
- configuration for the EFI IPv4 Protocol driver.
-**/
+///
+/// The EFI_IP4_CONFIG_PROTOCOL driver performs platform- and policy-dependent
+/// configuration for the EFI IPv4 Protocol driver.
+///
struct _EFI_IP4_CONFIG_PROTOCOL {
EFI_IP4_CONFIG_START Start;
EFI_IP4_CONFIG_STOP Stop;
diff --git a/MdePkg/Include/Protocol/LoadFile.h b/MdePkg/Include/Protocol/LoadFile.h index 5384f2aa8a..1f057550b5 100644 --- a/MdePkg/Include/Protocol/LoadFile.h +++ b/MdePkg/Include/Protocol/LoadFile.h @@ -76,10 +76,9 @@ EFI_STATUS IN VOID *Buffer OPTIONAL
);
-/**
- @par Protocol Description:
- The EFI_LOAD_FILE_PROTOCOL is a simple protocol used to obtain files from arbitrary devices.
-**/
+///
+/// The EFI_LOAD_FILE_PROTOCOL is a simple protocol used to obtain files from arbitrary devices.
+///
struct _EFI_LOAD_FILE_PROTOCOL {
EFI_LOAD_FILE LoadFile;
};
diff --git a/MdePkg/Include/Protocol/LoadedImage.h b/MdePkg/Include/Protocol/LoadedImage.h index 6af6ef76bd..c31b27545a 100644 --- a/MdePkg/Include/Protocol/LoadedImage.h +++ b/MdePkg/Include/Protocol/LoadedImage.h @@ -45,10 +45,9 @@ ///
#define EFI_LOADED_IMAGE_INFORMATION_REVISION EFI_LOADED_IMAGE_PROTOCOL_REVISION
-/**
- @par Protocol Description:
- Can be used on any image handle to obtain information about the loaded image.
-**/
+///
+/// Can be used on any image handle to obtain information about the loaded image.
+///
typedef struct {
///
/// Defines the revision of the EFI_LOADED_IMAGE_PROTOCOL structure.
@@ -61,6 +60,10 @@ typedef struct { /// the firmware's boot manager.
///
EFI_HANDLE ParentHandle;
+
+ ///
+ /// the image's EFI system table pointer.
+ ///
EFI_SYSTEM_TABLE *SystemTable;
//
@@ -103,12 +106,17 @@ typedef struct { /// The size in bytes of the loaded image.
///
UINT64 ImageSize;
+
+ ///
+ /// The memory type that the code sections were loaded as.
+ ///
EFI_MEMORY_TYPE ImageCodeType;
+
+ ///
+ /// The memory type that the data sections were loaded as.
+ ///
EFI_MEMORY_TYPE ImageDataType;
- //
- // If the driver image supports a dynamic unload request
- //
EFI_IMAGE_UNLOAD Unload;
} EFI_LOADED_IMAGE_PROTOCOL;
diff --git a/MdePkg/Include/Protocol/ManagedNetwork.h b/MdePkg/Include/Protocol/ManagedNetwork.h index 5e0c529ed9..8aedc7f90d 100644 --- a/MdePkg/Include/Protocol/ManagedNetwork.h +++ b/MdePkg/Include/Protocol/ManagedNetwork.h @@ -289,11 +289,10 @@ EFI_STATUS IN EFI_MANAGED_NETWORK_PROTOCOL *This
);
-/**
- @par Protocol Description:
- The MNP is used by network applications (and drivers) to
- perform raw (unformatted) asynchronous network packet I/O.
-**/
+///
+/// The MNP is used by network applications (and drivers) to
+/// perform raw (unformatted) asynchronous network packet I/O.
+///
struct _EFI_MANAGED_NETWORK_PROTOCOL {
EFI_MANAGED_NETWORK_GET_MODE_DATA GetModeData;
EFI_MANAGED_NETWORK_CONFIGURE Configure;
diff --git a/MdePkg/Include/Protocol/Metronome.h b/MdePkg/Include/Protocol/Metronome.h index 58a9c5ff36..2383c73046 100644 --- a/MdePkg/Include/Protocol/Metronome.h +++ b/MdePkg/Include/Protocol/Metronome.h @@ -57,21 +57,11 @@ EFI_STATUS IN UINT32 TickNumber
);
-/**
- Interface stucture for the Metronome Architectural Protocol.
-
- @par Protocol Description:
- This protocol provides access to a known time source in the platform to the
- core. The core uses this known time source to produce core services that
- require calibrated delays.
-
- @param WaitForTick
- Waits for a specified number of ticks from a known time source
- in the platform. The actual time passed between entry of this
- function and the first tick is between 0 and TickPeriod 100 nS
- units. If you want to guarantee that at least TickPeriod time
- has elapsed, wait for two ticks.
-**/
+///
+/// This protocol provides access to a known time source in the platform to the
+/// core. The core uses this known time source to produce core services that
+/// require calibrated delays.
+///
struct _EFI_METRONOME_ARCH_PROTOCOL {
EFI_METRONOME_WAIT_FOR_TICK WaitForTick;
diff --git a/MdePkg/Include/Protocol/Mtftp4.h b/MdePkg/Include/Protocol/Mtftp4.h index 00eb75f954..f2c3084b88 100644 --- a/MdePkg/Include/Protocol/Mtftp4.h +++ b/MdePkg/Include/Protocol/Mtftp4.h @@ -460,15 +460,11 @@ EFI_STATUS IN EFI_MTFTP4_PROTOCOL *This
);
-/**
- The EFI MTFTPv4 Protocol provides basic services for client-side unicast
- and/or multicast TFTP operations.
-
- @par Protocol Description:
- The EFI_MTFTP4_PROTOCOL is designed to be used by UEFI drivers and applications
- to transmit and receive data files. The EFI MTFTPv4 Protocol driver uses
- the underlying EFI UDPv4 Protocol driver and EFI IPv4 Protocol driver.
-**/
+///
+/// The EFI_MTFTP4_PROTOCOL is designed to be used by UEFI drivers and applications
+/// to transmit and receive data files. The EFI MTFTPv4 Protocol driver uses
+/// the underlying EFI UDPv4 Protocol driver and EFI IPv4 Protocol driver.
+///
struct _EFI_MTFTP4_PROTOCOL {
EFI_MTFTP4_GET_MODE_DATA GetModeData;
EFI_MTFTP4_CONFIGURE Configure;
diff --git a/MdePkg/Include/Protocol/NetworkInterfaceIdentifier.h b/MdePkg/Include/Protocol/NetworkInterfaceIdentifier.h index 64c2f7349e..6a6101d61e 100644 --- a/MdePkg/Include/Protocol/NetworkInterfaceIdentifier.h +++ b/MdePkg/Include/Protocol/NetworkInterfaceIdentifier.h @@ -43,11 +43,10 @@ typedef enum { EfiNetworkInterfaceUndi = 1
} EFI_NETWORK_PROTOCOL_TYPE;
-/**
- @par Protocol Description:
- An optional protocol that is used to describe details about the software
- layer that is used to produce the Simple Network Protocol.
-**/
+///
+/// An optional protocol that is used to describe details about the software
+/// layer that is used to produce the Simple Network Protocol.
+///
struct _EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL {
///
/// The revision of the EFI_NETWORK_INTERFACE_IDENTIFIER protocol.
diff --git a/MdePkg/Include/Protocol/Pcd.h b/MdePkg/Include/Protocol/Pcd.h index 20418bb6b3..815d4fc866 100644 --- a/MdePkg/Include/Protocol/Pcd.h +++ b/MdePkg/Include/Protocol/Pcd.h @@ -813,13 +813,9 @@ EFI_STATUS IN OUT CONST EFI_GUID **Guid
);
-//
-// Interface structure for the PCD Protocol
-//
-/**
- @par Protocol Description:
- This service abstracts the ability to set/get Platform Configuration Database (PCD).
-**/
+///
+/// This service abstracts the ability to set/get Platform Configuration Database (PCD).
+///
typedef struct {
PCD_PROTOCOL_SET_SKU SetSku;
diff --git a/MdePkg/Include/Protocol/PciIo.h b/MdePkg/Include/Protocol/PciIo.h index 8de52aad17..b233f3221f 100644 --- a/MdePkg/Include/Protocol/PciIo.h +++ b/MdePkg/Include/Protocol/PciIo.h @@ -474,14 +474,13 @@ EFI_STATUS IN OUT UINT64 *Length
);
-/**
- @par Protocol Description:
- The EFI_PCI_IO_PROTOCOL provides the basic Memory, I/O, PCI configuration,
- and DMA interfaces that are used to abstract accesses to PCI controllers.
- There is one EFI_PCI_IO_PROTOCOL instance for each PCI controller on a PCI bus.
- A device driver that wishes to manage a PCI controller in a system will have to
- retrieve the EFI_PCI_IO_PROTOCOL instance that is associated with the PCI controller.
-**/
+///
+/// The EFI_PCI_IO_PROTOCOL provides the basic Memory, I/O, PCI configuration,
+/// and DMA interfaces that are used to abstract accesses to PCI controllers.
+/// There is one EFI_PCI_IO_PROTOCOL instance for each PCI controller on a PCI bus.
+/// A device driver that wishes to manage a PCI controller in a system will have to
+/// retrieve the EFI_PCI_IO_PROTOCOL instance that is associated with the PCI controller.
+///
struct _EFI_PCI_IO_PROTOCOL {
EFI_PCI_IO_PROTOCOL_POLL_IO_MEM PollMem;
EFI_PCI_IO_PROTOCOL_POLL_IO_MEM PollIo;
diff --git a/MdePkg/Include/Protocol/PciRootBridgeIo.h b/MdePkg/Include/Protocol/PciRootBridgeIo.h index 6554cd3324..4435ae506f 100644 --- a/MdePkg/Include/Protocol/PciRootBridgeIo.h +++ b/MdePkg/Include/Protocol/PciRootBridgeIo.h @@ -358,11 +358,10 @@ EFI_STATUS OUT VOID **Resources
);
-/**
- @par Protocol Description:
- Provides the basic Memory, I/O, PCI configuration, and DMA interfaces that are
- used to abstract accesses to PCI controllers behind a PCI Root Bridge Controller.
-**/
+///
+/// Provides the basic Memory, I/O, PCI configuration, and DMA interfaces that are
+/// used to abstract accesses to PCI controllers behind a PCI Root Bridge Controller.
+///
struct _EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL {
///
/// The EFI_HANDLE of the PCI Host Bridge of which this PCI Root Bridge is a member.
diff --git a/MdePkg/Include/Protocol/PlatformDriverOverride.h b/MdePkg/Include/Protocol/PlatformDriverOverride.h index 018f64d9d9..2219ea65ba 100644 --- a/MdePkg/Include/Protocol/PlatformDriverOverride.h +++ b/MdePkg/Include/Protocol/PlatformDriverOverride.h @@ -119,20 +119,16 @@ EFI_STATUS IN EFI_HANDLE DriverImageHandle
);
-//
-// Interface structure for the Platform Driver Override Protocol
-//
-/**
- @par Protocol Description:
- This protocol matches one or more drivers to a controller. A platform driver
- produces this protocol, and it is installed on a separate handle. This protocol
- is used by the ConnectController() boot service to select the best driver
- for a controller. All of the drivers returned by this protocol have a higher
- precedence than drivers found from an EFI Bus Specific Driver Override Protocol
- or drivers found from the general UEFI driver Binding search algorithm. If more
- than one driver is returned by this protocol, then the drivers are returned in
- order from highest precedence to lowest precedence.
-**/
+///
+/// This protocol matches one or more drivers to a controller. A platform driver
+/// produces this protocol, and it is installed on a separate handle. This protocol
+/// is used by the ConnectController() boot service to select the best driver
+/// for a controller. All of the drivers returned by this protocol have a higher
+/// precedence than drivers found from an EFI Bus Specific Driver Override Protocol
+/// or drivers found from the general UEFI driver Binding search algorithm. If more
+/// than one driver is returned by this protocol, then the drivers are returned in
+/// order from highest precedence to lowest precedence.
+///
struct _EFI_PLATFORM_DRIVER_OVERRIDE_PROTOCOL {
EFI_PLATFORM_DRIVER_OVERRIDE_GET_DRIVER GetDriver;
EFI_PLATFORM_DRIVER_OVERRIDE_GET_DRIVER_PATH GetDriverPath;
diff --git a/MdePkg/Include/Protocol/PlatformToDriverConfiguration.h b/MdePkg/Include/Protocol/PlatformToDriverConfiguration.h index 7883028f10..0a6429c206 100644 --- a/MdePkg/Include/Protocol/PlatformToDriverConfiguration.h +++ b/MdePkg/Include/Protocol/PlatformToDriverConfiguration.h @@ -253,29 +253,18 @@ EFI_STATUS );
-/**
- @par Protocol Description:
- The EFI_PLATFORM_TO_DRIVER_CONFIGURATION_PROTOCOL is used by the
- UEFI driver to query the platform for configuration information.
- The UEFI driver calls Query() multiple times to get
- configuration information from the platform. For every call to
- Query() there must be a matching call to Response() so the
- UEFI driver can inform the platform how it used the
- information passed in from Query(). It's legal for a UEFI
- driver to use Response() to inform the platform it does not
- understand the data returned via Query() and thus no action was
- taken.
-
- @param Query Called by the UEFI Driver Start() function to
- get configuration information from the
- platform.
-
- @param Response Called by the UEFI Driver Start() function
- to let the platform know how UEFI driver
- processed the data return from Query.
-
-
-**/
+///
+/// The EFI_PLATFORM_TO_DRIVER_CONFIGURATION_PROTOCOL is used by the
+/// UEFI driver to query the platform for configuration information.
+/// The UEFI driver calls Query() multiple times to get
+/// configuration information from the platform. For every call to
+/// Query() there must be a matching call to Response() so the
+/// UEFI driver can inform the platform how it used the
+/// information passed in from Query(). It's legal for a UEFI
+/// driver to use Response() to inform the platform it does not
+/// understand the data returned via Query() and thus no action was
+/// taken.
+///
struct _EFI_PLATFORM_TO_DRIVER_CONFIGURATION_PROTOCOL {
EFI_PLATFORM_TO_DRIVER_CONFIGURATION_QUERY Query;
EFI_PLATFORM_TO_DRIVER_CONFIGURATION_RESPONSE Response;
diff --git a/MdePkg/Include/Protocol/PxeBaseCode.h b/MdePkg/Include/Protocol/PxeBaseCode.h index cda8b4622e..615007535f 100644 --- a/MdePkg/Include/Protocol/PxeBaseCode.h +++ b/MdePkg/Include/Protocol/PxeBaseCode.h @@ -608,15 +608,14 @@ EFI_STATUS //
#define EFI_PXE_BASE_CODE_INTERFACE_REVISION EFI_PXE_BASE_CODE_PROTOCOL_REVISION
-/**
- @par Protocol Description:
- The EFI_PXE_BASE_CODE_PROTOCOL is used to control PXE-compatible devices.
- An EFI_PXE_BASE_CODE_PROTOCOL will be layered on top of an
- EFI_MANAGED_NETWORK_PROTOCOL protocol in order to perform packet level transactions.
- The EFI_PXE_BASE_CODE_PROTOCOL handle also supports the
- EFI_LOAD_FILE_PROTOCOL protocol. This provides a clean way to obtain control from the
- boot manager if the boot path is from the remote device.
-**/
+///
+/// The EFI_PXE_BASE_CODE_PROTOCOL is used to control PXE-compatible devices.
+/// An EFI_PXE_BASE_CODE_PROTOCOL will be layered on top of an
+/// EFI_MANAGED_NETWORK_PROTOCOL protocol in order to perform packet level transactions.
+/// The EFI_PXE_BASE_CODE_PROTOCOL handle also supports the
+/// EFI_LOAD_FILE_PROTOCOL protocol. This provides a clean way to obtain control from the
+/// boot manager if the boot path is from the remote device.
+///
struct _EFI_PXE_BASE_CODE_PROTOCOL {
///
/// The revision of the EFI_PXE_BASE_CODE_PROTOCOL. All future revisions must
@@ -636,6 +635,9 @@ struct _EFI_PXE_BASE_CODE_PROTOCOL { EFI_PXE_BASE_CODE_SET_PARAMETERS SetParameters;
EFI_PXE_BASE_CODE_SET_STATION_IP SetStationIp;
EFI_PXE_BASE_CODE_SET_PACKETS SetPackets;
+ ///
+ /// Pointer to the EFI_PXE_BASE_CODE_MODE data for this device.
+ ///
EFI_PXE_BASE_CODE_MODE *Mode;
};
diff --git a/MdePkg/Include/Protocol/PxeBaseCodeCallBack.h b/MdePkg/Include/Protocol/PxeBaseCodeCallBack.h index 7ae98d7e21..fb030b24bd 100644 --- a/MdePkg/Include/Protocol/PxeBaseCodeCallBack.h +++ b/MdePkg/Include/Protocol/PxeBaseCodeCallBack.h @@ -88,12 +88,10 @@ EFI_PXE_BASE_CODE_CALLBACK_STATUS IN EFI_PXE_BASE_CODE_PACKET *Packet OPTIONAL
);
-/**
- @par Protocol Description:
- Protocol that is invoked when the PXE Base Code Protocol is about
- to transmit, has received, or is waiting to receive a packet.
-
-**/
+///
+/// Protocol that is invoked when the PXE Base Code Protocol is about
+/// to transmit, has received, or is waiting to receive a packet.
+///
struct _EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL {
///
/// The revision of the EFI_PXE_BASE_CODE_PROTOCOL. All future revisions must
diff --git a/MdePkg/Include/Protocol/Runtime.h b/MdePkg/Include/Protocol/Runtime.h index 355fa83fee..dc56ec6be9 100644 --- a/MdePkg/Include/Protocol/Runtime.h +++ b/MdePkg/Include/Protocol/Runtime.h @@ -61,20 +61,16 @@ struct _EFI_RUNTIME_EVENT_ENTRY { EFI_LIST_ENTRY Link;
};
-//
-// Interface stucture for the Runtime Architectural Protocol
-//
-/**
- @par Protocol Description:
- Allows the runtime functionality of the DXE Foundation to be contained in a
- separate driver. It also provides hooks for the DXE Foundation to export
- information that is needed at runtime. As such, this protocol allows the DXE
- Foundation to manage runtime drivers and events. This protocol also implies
- that the runtime services required to transition to virtual mode,
- SetVirtualAddressMap() and ConvertPointer(), have been registered into the
- EFI Runtime Table in the EFI System Partition. This protocol must be produced
- by a runtime DXE driver and may only be consumed by the DXE Foundation.
-**/
+///
+/// Allows the runtime functionality of the DXE Foundation to be contained in a
+/// separate driver. It also provides hooks for the DXE Foundation to export
+/// information that is needed at runtime. As such, this protocol allows the DXE
+/// Foundation to manage runtime drivers and events. This protocol also implies
+/// that the runtime services required to transition to virtual mode,
+/// SetVirtualAddressMap() and ConvertPointer(), have been registered into the
+/// EFI Runtime Table in the EFI System Partition. This protocol must be produced
+/// by a runtime DXE driver and may only be consumed by the DXE Foundation.
+///
struct _EFI_RUNTIME_ARCH_PROTOCOL {
///
/// A list of type EFI_RUNTIME_IMAGE_ENTRY.
diff --git a/MdePkg/Include/Protocol/ScsiIo.h b/MdePkg/Include/Protocol/ScsiIo.h index db209c8ec9..cf37eba5e9 100644 --- a/MdePkg/Include/Protocol/ScsiIo.h +++ b/MdePkg/Include/Protocol/ScsiIo.h @@ -215,10 +215,9 @@ EFI_STATUS IN EFI_EVENT Event OPTIONAL
);
-/**
- @par Protocol Description:
- Provides services to manage and communicate with SCSI devices.
-**/
+///
+/// Provides services to manage and communicate with SCSI devices.
+///
struct _EFI_SCSI_IO_PROTOCOL {
EFI_SCSI_IO_PROTOCOL_GET_DEVICE_TYPE GetDeviceType;
EFI_SCSI_IO_PROTOCOL_GET_DEVICE_LOCATION GetDeviceLocation;
diff --git a/MdePkg/Include/Protocol/ScsiPassThru.h b/MdePkg/Include/Protocol/ScsiPassThru.h index 1ff7a6dfbb..ee498e0ec3 100644 --- a/MdePkg/Include/Protocol/ScsiPassThru.h +++ b/MdePkg/Include/Protocol/ScsiPassThru.h @@ -296,15 +296,17 @@ EFI_STATUS IN UINT64 Lun
);
-/**
- @par Protocol Description:
- The EFI_SCSI_PASS_THRU_PROTOCOL provides information about a SCSI channel and
- the ability to send SCI Request Packets to any SCSI device attached to that SCSI channel. The
- information includes the Target ID of the host controller on the SCSI channel, the attributes of
- the SCSI channel, the printable name for the SCSI controller, and the printable name of the
- SCSI channel.
-**/
+///
+/// The EFI_SCSI_PASS_THRU_PROTOCOL provides information about a SCSI channel and
+/// the ability to send SCI Request Packets to any SCSI device attached to that SCSI channel. The
+/// information includes the Target ID of the host controller on the SCSI channel, the attributes of
+/// the SCSI channel, the printable name for the SCSI controller, and the printable name of the
+/// SCSI channel.
+///
struct _EFI_SCSI_PASS_THRU_PROTOCOL {
+ ///
+ /// A pointer to the EFI_SCSI_PASS_THRU_MODE data for this SCSI channel.
+ ///
EFI_SCSI_PASS_THRU_MODE *Mode;
EFI_SCSI_PASS_THRU_PASSTHRU PassThru;
EFI_SCSI_PASS_THRU_GET_NEXT_DEVICE GetNextDevice;
diff --git a/MdePkg/Include/Protocol/ScsiPassThruExt.h b/MdePkg/Include/Protocol/ScsiPassThruExt.h index 39b2ba5907..d63f056c5a 100644 --- a/MdePkg/Include/Protocol/ScsiPassThruExt.h +++ b/MdePkg/Include/Protocol/ScsiPassThruExt.h @@ -308,14 +308,16 @@ EFI_STATUS IN OUT UINT8 **Target
);
-/**
- @par Protocol Description:
- The EFI_EXT_SCSI_PASS_THRU_PROTOCOL provides information about a SCSI channel
- and the ability to send SCI Request Packets to any SCSI device attached to
- that SCSI channel. The information includes the Target ID of the host controller
- on the SCSI channel and the attributes of the SCSI channel.
-**/
+///
+/// The EFI_EXT_SCSI_PASS_THRU_PROTOCOL provides information about a SCSI channel
+/// and the ability to send SCI Request Packets to any SCSI device attached to
+/// that SCSI channel. The information includes the Target ID of the host controller
+/// on the SCSI channel and the attributes of the SCSI channel.
+///
struct _EFI_EXT_SCSI_PASS_THRU_PROTOCOL {
+ ///
+ /// A pointer to the EFI_EXT_SCSI_PASS_THRU_MODE data for this SCSI channel.
+ ///
EFI_EXT_SCSI_PASS_THRU_MODE *Mode;
EFI_EXT_SCSI_PASS_THRU_PASSTHRU PassThru;
EFI_EXT_SCSI_PASS_THRU_GET_NEXT_TARGET_LUN GetNextTargetLun;
diff --git a/MdePkg/Include/Protocol/Security.h b/MdePkg/Include/Protocol/Security.h index 4ab386fd67..71c236f151 100644 --- a/MdePkg/Include/Protocol/Security.h +++ b/MdePkg/Include/Protocol/Security.h @@ -89,28 +89,11 @@ EFI_STATUS IN EFI_DEVICE_PATH_PROTOCOL *File
);
-//
-// Interface stucture for the Timer Architectural Protocol
-//
-/**
- @par Protocol Description:
-
- The EFI_SECURITY_ARCH_PROTOCOL is used to abstract platform-specific policy
- from the DXE core. This includes locking flash upon failure to authenticate,
- attestation logging, and other exception operations.
-
- The driver that produces the EFI_SECURITY_ARCH_PROTOCOL may also optionally
- install the EFI_SECURITY_POLICY_PROTOCOL_GUID onto a new handle with a NULL
- interface. The existence of this GUID in the protocol database means that
- the GUIDed Section Extraction Protocol should authenticate the contents of
- an Authentication Section. The expectation is that the GUIDed Section
- Extraction protocol will look for the existence of the EFI_SECURITY_POLICY_
- PROTOCOL_GUID in the protocol database. If it exists, then the publication
- thereof is taken as an injunction to attempt an authentication of any section
- wrapped in an Authentication Section. See the Firmware File System
- Specification for details on the GUIDed Section Extraction Protocol and
- Authentication Sections.
-**/
+///
+/// The EFI_SECURITY_ARCH_PROTOCOL is used to abstract platform-specific policy
+/// from the DXE core. This includes locking flash upon failure to authenticate,
+/// attestation logging, and other exception operations.
+///
struct _EFI_SECURITY_ARCH_PROTOCOL {
EFI_SECURITY_FILE_AUTHENTICATION_STATE FileAuthenticationState;
};
diff --git a/MdePkg/Include/Protocol/SerialIo.h b/MdePkg/Include/Protocol/SerialIo.h index f057cffea0..4af00fcad9 100644 --- a/MdePkg/Include/Protocol/SerialIo.h +++ b/MdePkg/Include/Protocol/SerialIo.h @@ -266,12 +266,11 @@ typedef struct { #define EFI_SERIAL_IO_PROTOCOL_REVISION 0x00010000
#define SERIAL_IO_INTERFACE_REVISION EFI_SERIAL_IO_PROTOCOL_REVISION
-/**
- @par Protocol Description:
- The Serial I/O protocol is used to communicate with UART-style serial devices.
- These can be standard UART serial ports in PC-AT systems, serial ports attached
- to a USB interface, or potentially any character-based I/O device.
-**/
+///
+/// The Serial I/O protocol is used to communicate with UART-style serial devices.
+/// These can be standard UART serial ports in PC-AT systems, serial ports attached
+/// to a USB interface, or potentially any character-based I/O device.
+///
struct _EFI_SERIAL_IO_PROTOCOL {
///
/// The revision to which the EFI_SERIAL_IO_PROTOCOL adheres. All future revisions
@@ -285,7 +284,9 @@ struct _EFI_SERIAL_IO_PROTOCOL { EFI_SERIAL_GET_CONTROL_BITS GetControl;
EFI_SERIAL_WRITE Write;
EFI_SERIAL_READ Read;
-
+ ///
+ /// Pointer to SERIAL_IO_MODE data.
+ ///
EFI_SERIAL_IO_MODE *Mode;
};
diff --git a/MdePkg/Include/Protocol/ServiceBinding.h b/MdePkg/Include/Protocol/ServiceBinding.h index ae6cd323a4..afd25efb57 100644 --- a/MdePkg/Include/Protocol/ServiceBinding.h +++ b/MdePkg/Include/Protocol/ServiceBinding.h @@ -67,18 +67,17 @@ EFI_STATUS IN EFI_HANDLE ChildHandle
);
-/**
- @par Protocol Description:
- The EFI_SERVICE_BINDING_PROTOCOL provides member functions to create and destroy
- child handles. A driver is responsible for adding protocols to the child handle
- in CreateChild() and removing protocols in DestroyChild(). It is also required
- that the CreateChild() function opens the parent protocol BY_CHILD_CONTROLLER
- to establish the parent-child relationship, and closes the protocol in DestroyChild().
- The pseudo code for CreateChild() and DestroyChild() is provided to specify the
- required behavior, not to specify the required implementation. Each consumer of
- a software protocol is responsible for calling CreateChild() when it requires the
- protocol and calling DestroyChild() when it is finished with that protocol.
-**/
+///
+/// The EFI_SERVICE_BINDING_PROTOCOL provides member functions to create and destroy
+/// child handles. A driver is responsible for adding protocols to the child handle
+/// in CreateChild() and removing protocols in DestroyChild(). It is also required
+/// that the CreateChild() function opens the parent protocol BY_CHILD_CONTROLLER
+/// to establish the parent-child relationship, and closes the protocol in DestroyChild().
+/// The pseudo code for CreateChild() and DestroyChild() is provided to specify the
+/// required behavior, not to specify the required implementation. Each consumer of
+/// a software protocol is responsible for calling CreateChild() when it requires the
+/// protocol and calling DestroyChild() when it is finished with that protocol.
+///
struct _EFI_SERVICE_BINDING_PROTOCOL {
EFI_SERVICE_BINDING_CREATE_CHILD CreateChild;
EFI_SERVICE_BINDING_DESTROY_CHILD DestroyChild;
diff --git a/MdePkg/Include/Protocol/SimpleFileSystem.h b/MdePkg/Include/Protocol/SimpleFileSystem.h index dcc3657103..eb850be94f 100644 --- a/MdePkg/Include/Protocol/SimpleFileSystem.h +++ b/MdePkg/Include/Protocol/SimpleFileSystem.h @@ -314,14 +314,13 @@ EFI_STATUS //
#define EFI_FILE_REVISION EFI_FILE_PROTOCOL_REVISION
-/**
- @par Protocol Description:
- The EFI_FILE_PROTOCOL provides file IO access to supported file systems.
- An EFI_FILE_PROTOCOL provides access to a file's or directory's contents,
- and is also a reference to a location in the directory tree of the file system
- in which the file resides. With any given file handle, other files may be opened
- relative to this file's location, yielding new file handles.
-**/
+///
+/// The EFI_FILE_PROTOCOL provides file IO access to supported file systems.
+/// An EFI_FILE_PROTOCOL provides access to a file's or directory's contents,
+/// and is also a reference to a location in the directory tree of the file system
+/// in which the file resides. With any given file handle, other files may be opened
+/// relative to this file's location, yielding new file handles.
+///
struct _EFI_FILE_PROTOCOL {
///
/// The version of the EFI_FILE_PROTOCOL interface. The version specified
diff --git a/MdePkg/Include/Protocol/SimpleNetwork.h b/MdePkg/Include/Protocol/SimpleNetwork.h index 4e6873389a..48033d803c 100644 --- a/MdePkg/Include/Protocol/SimpleNetwork.h +++ b/MdePkg/Include/Protocol/SimpleNetwork.h @@ -552,13 +552,12 @@ EFI_STATUS //
#define EFI_SIMPLE_NETWORK_INTERFACE_REVISION EFI_SIMPLE_NETWORK_PROTOCOL_REVISION
-/**
- @par Protocol Description:
- The EFI_SIMPLE_NETWORK_PROTOCOL protocol is used to initialize access
- to a network adapter. Once the network adapter initializes,
- the EFI_SIMPLE_NETWORK_PROTOCOL protocol provides services that
- allow packets to be transmitted and received.
-**/
+///
+/// The EFI_SIMPLE_NETWORK_PROTOCOL protocol is used to initialize access
+/// to a network adapter. Once the network adapter initializes,
+/// the EFI_SIMPLE_NETWORK_PROTOCOL protocol provides services that
+/// allow packets to be transmitted and received.
+///
struct _EFI_SIMPLE_NETWORK_PROTOCOL {
///
/// Revision of the EFI_SIMPLE_NETWORK_PROTOCOL. All future revisions must
@@ -583,6 +582,9 @@ struct _EFI_SIMPLE_NETWORK_PROTOCOL { /// Event used with WaitForEvent() to wait for a packet to be received.
///
EFI_EVENT WaitForPacket;
+ ///
+ /// Pointer to the EFI_SIMPLE_NETWORK_MODE data for the device.
+ ///
EFI_SIMPLE_NETWORK_MODE *Mode;
};
diff --git a/MdePkg/Include/Protocol/SimplePointer.h b/MdePkg/Include/Protocol/SimplePointer.h index a3b5a9da42..5d22bf6e44 100644 --- a/MdePkg/Include/Protocol/SimplePointer.h +++ b/MdePkg/Include/Protocol/SimplePointer.h @@ -83,14 +83,13 @@ EFI_STATUS IN OUT EFI_SIMPLE_POINTER_STATE *State
);
-/**
- @par Protocol Description:
- The EFI_SIMPLE_POINTER_PROTOCOL provides a set of services for a pointer
- device that can use used as an input device from an application written
- to this specification. The services include the ability to reset the
- pointer device, retrieve get the state of the pointer device, and
- retrieve the capabilities of the pointer device.
-**/
+///
+/// The EFI_SIMPLE_POINTER_PROTOCOL provides a set of services for a pointer
+/// device that can use used as an input device from an application written
+/// to this specification. The services include the ability to reset the
+/// pointer device, retrieve get the state of the pointer device, and
+/// retrieve the capabilities of the pointer device.
+///
struct _EFI_SIMPLE_POINTER_PROTOCOL {
EFI_SIMPLE_POINTER_RESET Reset;
EFI_SIMPLE_POINTER_GET_STATE GetState;
@@ -98,6 +97,9 @@ struct _EFI_SIMPLE_POINTER_PROTOCOL { /// Event to use with WaitForEvent() to wait for input from the pointer device.
///
EFI_EVENT WaitForInput;
+ ///
+ /// Pointer to EFI_SIMPLE_POINTER_MODE data.
+ ///
EFI_SIMPLE_POINTER_MODE *Mode;
};
diff --git a/MdePkg/Include/Protocol/SimpleTextIn.h b/MdePkg/Include/Protocol/SimpleTextIn.h index ffb091cb5d..0716b73674 100644 --- a/MdePkg/Include/Protocol/SimpleTextIn.h +++ b/MdePkg/Include/Protocol/SimpleTextIn.h @@ -118,11 +118,10 @@ EFI_STATUS OUT EFI_INPUT_KEY *Key
);
-/**
- @par Protocol Description:
- The EFI_SIMPLE_TEXT_INPUT_PROTOCOL is used on the ConsoleIn device.
- It is the minimum required protocol for ConsoleIn.
-**/
+///
+/// The EFI_SIMPLE_TEXT_INPUT_PROTOCOL is used on the ConsoleIn device.
+/// It is the minimum required protocol for ConsoleIn.
+///
struct _EFI_SIMPLE_TEXT_INPUT_PROTOCOL {
EFI_INPUT_RESET Reset;
EFI_INPUT_READ_KEY ReadKeyStroke;
diff --git a/MdePkg/Include/Protocol/SimpleTextInEx.h b/MdePkg/Include/Protocol/SimpleTextInEx.h index 3618550d48..8dcb5e1419 100644 --- a/MdePkg/Include/Protocol/SimpleTextInEx.h +++ b/MdePkg/Include/Protocol/SimpleTextInEx.h @@ -300,12 +300,12 @@ EFI_STATUS );
-/**
- The EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL is used on the ConsoleIn
- device. It is an extension to the Simple Text Input protocol
- which allows a variety of extended shift state information to be
- returned.
-**/
+///
+/// The EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL is used on the ConsoleIn
+/// device. It is an extension to the Simple Text Input protocol
+/// which allows a variety of extended shift state information to be
+/// returned.
+///
struct _EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL{
EFI_INPUT_RESET_EX Reset;
EFI_INPUT_READ_KEY_EX ReadKeyStrokeEx;
diff --git a/MdePkg/Include/Protocol/SimpleTextOut.h b/MdePkg/Include/Protocol/SimpleTextOut.h index 888ee91df9..a55b407f10 100644 --- a/MdePkg/Include/Protocol/SimpleTextOut.h +++ b/MdePkg/Include/Protocol/SimpleTextOut.h @@ -373,13 +373,12 @@ typedef struct { BOOLEAN CursorVisible;
} EFI_SIMPLE_TEXT_OUTPUT_MODE;
-/**
- @par Protocol Description:
- The SIMPLE_TEXT_OUTPUT protocol is used to control text-based output devices.
- It is the minimum required protocol for any handle supplied as the ConsoleOut
- or StandardError device. In addition, the minimum supported text mode of such
- devices is at least 80 x 25 characters.
-**/
+///
+/// The SIMPLE_TEXT_OUTPUT protocol is used to control text-based output devices.
+/// It is the minimum required protocol for any handle supplied as the ConsoleOut
+/// or StandardError device. In addition, the minimum supported text mode of such
+/// devices is at least 80 x 25 characters.
+///
struct _EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL {
EFI_TEXT_RESET Reset;
@@ -394,9 +393,9 @@ struct _EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL { EFI_TEXT_SET_CURSOR_POSITION SetCursorPosition;
EFI_TEXT_ENABLE_CURSOR EnableCursor;
- //
- // Current mode
- //
+ ///
+ /// Pointer to SIMPLE_TEXT_OUTPUT_MODE data.
+ ///
EFI_SIMPLE_TEXT_OUTPUT_MODE *Mode;
};
diff --git a/MdePkg/Include/Protocol/SmbusHc.h b/MdePkg/Include/Protocol/SmbusHc.h index 4ba5b9ead5..67a174eec6 100644 --- a/MdePkg/Include/Protocol/SmbusHc.h +++ b/MdePkg/Include/Protocol/SmbusHc.h @@ -274,12 +274,11 @@ EFI_STATUS );
-/**
- @par Protocol Description:
- The EFI_SMBUS_HC_PROTOCOL provides SMBus host controller management and basic data
- transactions over SMBus. There is one EFI_SMBUS_HC_PROTOCOL instance for each SMBus
- host controller.
-**/
+///
+/// The EFI_SMBUS_HC_PROTOCOL provides SMBus host controller management and basic data
+/// transactions over SMBus. There is one EFI_SMBUS_HC_PROTOCOL instance for each SMBus
+/// host controller.
+///
struct _EFI_SMBUS_HC_PROTOCOL {
EFI_SMBUS_HC_EXECUTE_OPERATION Execute;
EFI_SMBUS_HC_PROTOCOL_ARP_DEVICE ArpDevice;
diff --git a/MdePkg/Include/Protocol/StatusCode.h b/MdePkg/Include/Protocol/StatusCode.h index 8f90cafb76..70fa619ba8 100644 --- a/MdePkg/Include/Protocol/StatusCode.h +++ b/MdePkg/Include/Protocol/StatusCode.h @@ -56,13 +56,11 @@ EFI_STATUS IN EFI_STATUS_CODE_DATA *Data OPTIONAL
);
-/**
- @par Protocol Description:
- Provides the service required to report a status code to the platform firmware.
- This protocol must be produced by a runtime DXE driver and may be consumed
- only by the DXE Foundation.
-
-**/
+///
+/// Provides the service required to report a status code to the platform firmware.
+/// This protocol must be produced by a runtime DXE driver and may be consumed
+/// only by the DXE Foundation.
+///
typedef struct _EFI_STATUS_CODE_PROTOCOL {
EFI_REPORT_STATUS_CODE ReportStatusCode;
} EFI_STATUS_CODE_PROTOCOL;
diff --git a/MdePkg/Include/Protocol/TapeIo.h b/MdePkg/Include/Protocol/TapeIo.h index 8bef5475f3..6183a2083c 100644 --- a/MdePkg/Include/Protocol/TapeIo.h +++ b/MdePkg/Include/Protocol/TapeIo.h @@ -217,14 +217,12 @@ EFI_STATUS IN BOOLEAN ExtendedVerification
);
-/**
- @par Protocol Description:
- The EFI_TAPE_IO_PROTOCOL provides basic sequential operations for tape devices.
- These include read, write, rewind, space, write filemarks and reset functions.
- Per this specification, a boot application uses the services of this protocol
- to load the bootloader image from tape.
-
-**/
+///
+/// The EFI_TAPE_IO_PROTOCOL provides basic sequential operations for tape devices.
+/// These include read, write, rewind, space, write filemarks and reset functions.
+/// Per this specification, a boot application uses the services of this protocol
+/// to load the bootloader image from tape.
+///
struct _EFI_TAPE_IO_PROTOCOL {
EFI_TAPE_READ TapeRead;
EFI_TAPE_WRITE TapeWrite;
diff --git a/MdePkg/Include/Protocol/TcgService.h b/MdePkg/Include/Protocol/TcgService.h index 829030be47..1c9c149d14 100644 --- a/MdePkg/Include/Protocol/TcgService.h +++ b/MdePkg/Include/Protocol/TcgService.h @@ -197,11 +197,9 @@ EFI_STATUS OUT EFI_PHYSICAL_ADDRESS *EventLogLastEntry
);
-/**
- @par Protocol Description:
- The EFI_TCG Protocol abstracts TCG activity.
-
-**/
+///
+/// The EFI_TCG Protocol abstracts TCG activity.
+///
struct _EFI_TCG_PROTOCOL {
EFI_TCG_STATUS_CHECK StatusCheck;
EFI_TCG_HASH_ALL HashAll;
diff --git a/MdePkg/Include/Protocol/Tcp4.h b/MdePkg/Include/Protocol/Tcp4.h index 04b8c92696..c1230f1b7f 100644 --- a/MdePkg/Include/Protocol/Tcp4.h +++ b/MdePkg/Include/Protocol/Tcp4.h @@ -475,14 +475,13 @@ EFI_STATUS IN EFI_TCP4_PROTOCOL *This
);
-/**
- @par Protocol Description:
- The EFI_TCP4_PROTOCOL defines the EFI TCPv4 Protocol child to be used by
- any network drivers or applications to send or receive data stream.
- It can either listen on a specified port as a service or actively connected
- to remote peer as a client. Each instance has its own independent settings,
- such as the routing table.
-**/
+///
+/// The EFI_TCP4_PROTOCOL defines the EFI TCPv4 Protocol child to be used by
+/// any network drivers or applications to send or receive data stream.
+/// It can either listen on a specified port as a service or actively connected
+/// to remote peer as a client. Each instance has its own independent settings,
+/// such as the routing table.
+///
struct _EFI_TCP4_PROTOCOL {
EFI_TCP4_GET_MODE_DATA GetModeData;
EFI_TCP4_CONFIGURE Configure;
diff --git a/MdePkg/Include/Protocol/Timer.h b/MdePkg/Include/Protocol/Timer.h index fa24f411dd..41b17dbf1f 100644 --- a/MdePkg/Include/Protocol/Timer.h +++ b/MdePkg/Include/Protocol/Timer.h @@ -160,17 +160,14 @@ EFI_STATUS );
-/**
- Interface stucture for the Timer Architectural Protocol.
-
- @par Protocol Description:
- This protocol provides the services to initialize a periodic timer
- interrupt, and to register a handler that is called each time the timer
- interrupt fires. It may also provide a service to adjust the rate of the
- periodic timer interrupt. When a timer interrupt occurs, the handler is
- passed the amount of time that has passed since the previous timer
- interrupt.
-**/
+///
+/// This protocol provides the services to initialize a periodic timer
+/// interrupt, and to register a handler that is called each time the timer
+/// interrupt fires. It may also provide a service to adjust the rate of the
+/// periodic timer interrupt. When a timer interrupt occurs, the handler is
+/// passed the amount of time that has passed since the previous timer
+/// interrupt.
+///
struct _EFI_TIMER_ARCH_PROTOCOL {
EFI_TIMER_REGISTER_HANDLER RegisterHandler;
EFI_TIMER_SET_TIMER_PERIOD SetTimerPeriod;
diff --git a/MdePkg/Include/Protocol/Udp4.h b/MdePkg/Include/Protocol/Udp4.h index 86e1c3094a..b7409f220c 100644 --- a/MdePkg/Include/Protocol/Udp4.h +++ b/MdePkg/Include/Protocol/Udp4.h @@ -342,14 +342,13 @@ EFI_STATUS IN EFI_UDP4_COMPLETION_TOKEN *Token OPTIONAL
);
-/**
- @par Protocol Description:
- The EFI_UDP4_PROTOCOL defines an EFI UDPv4 Protocol session that can be used
- by any network drivers, applications, or daemons to transmit or receive UDP packets.
- This protocol instance can either be bound to a specified port as a service or
- connected to some remote peer as an active client. Each instance has its own settings,
- such as the routing table and group table, which are independent from each other.
-**/
+///
+/// The EFI_UDP4_PROTOCOL defines an EFI UDPv4 Protocol session that can be used
+/// by any network drivers, applications, or daemons to transmit or receive UDP packets.
+/// This protocol instance can either be bound to a specified port as a service or
+/// connected to some remote peer as an active client. Each instance has its own settings,
+/// such as the routing table and group table, which are independent from each other.
+///
struct _EFI_UDP4_PROTOCOL {
EFI_UDP4_GET_MODE_DATA GetModeData;
EFI_UDP4_CONFIGURE Configure;
diff --git a/MdePkg/Include/Protocol/UgaDraw.h b/MdePkg/Include/Protocol/UgaDraw.h index 9465c3f772..b29a620c53 100644 --- a/MdePkg/Include/Protocol/UgaDraw.h +++ b/MdePkg/Include/Protocol/UgaDraw.h @@ -151,16 +151,10 @@ EFI_STATUS IN UINTN Delta OPTIONAL
);
-/**
- This protocol provides a basic abstraction to set video modes and
- copy pixels to and from the graphics controller's frame buffer.
-
- @par Protocol Description:
- The EFI_UGA_DRAW_PROTOCOL provides a software abstraction to allow pixels to be drawn
- directly to the frame buffer. The EFI_UGA_DRAW_PROTOCOL is designed to be lightweight and
- to support the basic needs of graphics output prior to Operating System boot.
-
-**/
+///
+/// This protocol provides a basic abstraction to set video modes and
+/// copy pixels to and from the graphics controller's frame buffer.
+///
struct _EFI_UGA_DRAW_PROTOCOL {
EFI_UGA_DRAW_PROTOCOL_GET_MODE GetMode;
EFI_UGA_DRAW_PROTOCOL_SET_MODE SetMode;
diff --git a/MdePkg/Include/Protocol/UgaIo.h b/MdePkg/Include/Protocol/UgaIo.h index 50fb3d569a..b534b30c70 100644 --- a/MdePkg/Include/Protocol/UgaIo.h +++ b/MdePkg/Include/Protocol/UgaIo.h @@ -162,10 +162,9 @@ typedef UGA_STATUS IN OUT PUGA_IO_REQUEST pIoRequest
);
-/**
- @par Protocol Description:
- Provides a basic abstraction to send I/O requests to the graphics device and any of its children.
-**/
+///
+/// Provides a basic abstraction to send I/O requests to the graphics device and any of its children.
+///
struct _EFI_UGA_IO_PROTOCOL {
EFI_UGA_IO_PROTOCOL_CREATE_DEVICE CreateDevice;
EFI_UGA_IO_PROTOCOL_DELETE_DEVICE DeleteDevice;
diff --git a/MdePkg/Include/Protocol/UnicodeCollation.h b/MdePkg/Include/Protocol/UnicodeCollation.h index 67d124fecb..62b043b45a 100644 --- a/MdePkg/Include/Protocol/UnicodeCollation.h +++ b/MdePkg/Include/Protocol/UnicodeCollation.h @@ -164,11 +164,10 @@ BOOLEAN OUT CHAR8 *Fat
);
-/**
- @par Protocol Description:
- The EFI_UNICODE_COLLATION_PROTOCOL is used to perform case-insensitive
- comparisons of Unicode strings.
-**/
+///
+/// The EFI_UNICODE_COLLATION_PROTOCOL is used to perform case-insensitive
+/// comparisons of Unicode strings.
+///
struct _EFI_UNICODE_COLLATION_PROTOCOL {
//
// general
@@ -185,7 +184,7 @@ struct _EFI_UNICODE_COLLATION_PROTOCOL { EFI_UNICODE_COLLATION_STRTOFAT StrToFat;
///
- /// LanguagesA Null-terminated ASCII string array that contains one or more
+ /// A Null-terminated ASCII string array that contains one or more
/// language codes. This array is specified in RFC 4646 format.
///
CHAR8 *SupportedLanguages;
diff --git a/MdePkg/Include/Protocol/Usb2HostController.h b/MdePkg/Include/Protocol/Usb2HostController.h index 22a80e557a..84c40a01dc 100644 --- a/MdePkg/Include/Protocol/Usb2HostController.h +++ b/MdePkg/Include/Protocol/Usb2HostController.h @@ -553,16 +553,14 @@ EFI_STATUS IN EFI_USB_PORT_FEATURE PortFeature
);
-/**
- @par Protocol Description:
- The EFI_USB2_HC_PROTOCOL provides USB host controller management, basic
- data transactions over a USB bus, and USB root hub access. A device driver
- that wishes to manage a USB bus in a system retrieves the EFI_USB2_HC_PROTOCOL
- instance that is associated with the USB bus to be managed. A device handle
- for a USB host controller will minimally contain an EFI_DEVICE_PATH_PROTOCOL
- instance, and an EFI_USB2_HC_PROTOCOL instance.
-
-**/
+///
+/// The EFI_USB2_HC_PROTOCOL provides USB host controller management, basic
+/// data transactions over a USB bus, and USB root hub access. A device driver
+/// that wishes to manage a USB bus in a system retrieves the EFI_USB2_HC_PROTOCOL
+/// instance that is associated with the USB bus to be managed. A device handle
+/// for a USB host controller will minimally contain an EFI_DEVICE_PATH_PROTOCOL
+/// instance, and an EFI_USB2_HC_PROTOCOL instance.
+///
struct _EFI_USB2_HC_PROTOCOL {
EFI_USB2_HC_PROTOCOL_GET_CAPABILITY GetCapability;
EFI_USB2_HC_PROTOCOL_RESET Reset;
diff --git a/MdePkg/Include/Protocol/UsbHostController.h b/MdePkg/Include/Protocol/UsbHostController.h index 89de708e88..803316f145 100644 --- a/MdePkg/Include/Protocol/UsbHostController.h +++ b/MdePkg/Include/Protocol/UsbHostController.h @@ -468,15 +468,13 @@ EFI_STATUS );
-/**
- @par Protocol Description:
- The EFI_USB_HC_PROTOCOL provides USB host controller management, basic data transactions
- over a USB bus, and USB root hub access. A device driver that wishes to manage a USB bus in a
- system retrieves the EFI_USB_HC_PROTOCOL instance that is associated with the USB bus to be
- managed. A device handle for a USB host controller will minimally contain an
- EFI_DEVICE_PATH_PROTOCOL instance, and an EFI_USB_HC_PROTOCOL instance.
-
-**/
+///
+/// The EFI_USB_HC_PROTOCOL provides USB host controller management, basic data transactions
+/// over a USB bus, and USB root hub access. A device driver that wishes to manage a USB bus in a
+/// system retrieves the EFI_USB_HC_PROTOCOL instance that is associated with the USB bus to be
+/// managed. A device handle for a USB host controller will minimally contain an
+/// EFI_DEVICE_PATH_PROTOCOL instance, and an EFI_USB_HC_PROTOCOL instance.
+///
struct _EFI_USB_HC_PROTOCOL {
EFI_USB_HC_PROTOCOL_RESET Reset;
EFI_USB_HC_PROTOCOL_GET_STATE GetState;
diff --git a/MdePkg/Include/Protocol/UsbIo.h b/MdePkg/Include/Protocol/UsbIo.h index 55fd3b8d37..0c5bd70445 100644 --- a/MdePkg/Include/Protocol/UsbIo.h +++ b/MdePkg/Include/Protocol/UsbIo.h @@ -473,14 +473,13 @@ EFI_STATUS OUT UINT16 *TableSize
);
-/**
- @par Protocol Description:
- The EFI_USB_IO_PROTOCOL provides four basic transfers types described
- in the USB 1.1 Specification. These include control transfer, interrupt
- transfer, bulk transfer and isochronous transfer. The EFI_USB_IO_PROTOCOL
- also provides some basic USB device/controller management and configuration
- interfaces. A USB device driver uses the services of this protocol to manage USB devices.
-**/
+///
+/// The EFI_USB_IO_PROTOCOL provides four basic transfers types described
+/// in the USB 1.1 Specification. These include control transfer, interrupt
+/// transfer, bulk transfer and isochronous transfer. The EFI_USB_IO_PROTOCOL
+/// also provides some basic USB device/controller management and configuration
+/// interfaces. A USB device driver uses the services of this protocol to manage USB devices.
+///
struct _EFI_USB_IO_PROTOCOL {
//
// IO transfer
diff --git a/MdePkg/Include/Protocol/WatchdogTimer.h b/MdePkg/Include/Protocol/WatchdogTimer.h index 17f5f3b374..2727862038 100644 --- a/MdePkg/Include/Protocol/WatchdogTimer.h +++ b/MdePkg/Include/Protocol/WatchdogTimer.h @@ -121,20 +121,17 @@ EFI_STATUS );
-/**
- Interface stucture for the Watchdog Timer Architectural Protocol.
-
- @par Protocol Description:
- This protocol provides the services required to implement the Boot Service
- SetWatchdogTimer(). It provides a service to set the amount of time to wait
- before firing the watchdog timer, and it also provides a service to register
- a handler that is invoked when the watchdog timer fires. This protocol can
- implement the watchdog timer by using the event and timer Boot Services, or
- it can make use of custom hardware. When the watchdog timer fires, control
- will be passed to a handler if one has been registered. If no handler has
- been registered, or the registered handler returns, then the system will be
- reset by calling the Runtime Service ResetSystem().
-**/
+///
+/// This protocol provides the services required to implement the Boot Service
+/// SetWatchdogTimer(). It provides a service to set the amount of time to wait
+/// before firing the watchdog timer, and it also provides a service to register
+/// a handler that is invoked when the watchdog timer fires. This protocol can
+/// implement the watchdog timer by using the event and timer Boot Services, or
+/// it can make use of custom hardware. When the watchdog timer fires, control
+/// will be passed to a handler if one has been registered. If no handler has
+/// been registered, or the registered handler returns, then the system will be
+/// reset by calling the Runtime Service ResetSystem().
+///
struct _EFI_WATCHDOG_TIMER_ARCH_PROTOCOL {
EFI_WATCHDOG_TIMER_REGISTER_HANDLER RegisterHandler;
EFI_WATCHDOG_TIMER_SET_TIMER_PERIOD SetTimerPeriod;
|