HACK: add FVP makefilearmlt-20150622armlt-15.06

This is a hack because it's a straight copy of the Juno makefile, with a
few bits renamed.

We really need to create a more generic infrastructure for makefiles.

Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>

1 files changed, 90 insertions, 0 deletions

diff --git a/ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-FVP-AArch64.mak b/ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-FVP-AArch64.mak
new file mode 100644
index 0000000000..b660f1ea3c
--- /dev/null
+++ b/ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-FVP-AArch64.mak
@@ -0,0 +1,90 @@
+#
+#  Copyright (c) 2013-2014, ARM Limited. All rights reserved.
+#
+#  This program and the accompanying materials
+#  are licensed and made available under the terms and conditions of the BSD License
+#  which accompanies this distribution.  The full text of the license may be found at
+#  http://opensource.org/licenses/bsd-license.php
+#
+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+# Define the following variables to specify an alternative toolchain to the one located in your PATH:
+# - RVCT_TOOLS_PATH: for RVCT and RVCTLINUX toolchains
+# - ARMGCC_TOOLS_PATH: for ARMGCC toolchain
+# - ARMLINUXGCC_TOOLS_PATH: for ARMLINUXGCC
+
+EDK2_TOOLCHAIN ?= GCC49
+GCC49_AARCH64_PREFIX ?= aarch64-none-elf-
+EDK2_ARCH ?= AARCH64
+EDK2_BUILD ?= DEBUG
+EDK2_DSC = ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-FVP-AArch64.dsc
+DEST_BIN_ROOT ?=
+EDK2_MACROS=-D ARM_FOUNDATION_FVP=1 -D EDK2_ENABLE_SMSC_91X=1 -D EDK2_OUT_DIR=Build/ArmVExpress-FVP-AArch64-Minimal
+
+ifeq ($(EDK2_DSC),"")
+  $(error The Makefile macro 'EDK2_DSC' must be defined with an EDK2 DSC file.)
+endif
+
+ifeq ("$(OS)","Windows_NT")
+export WORKSPACE?=$(PWD)
+export EDK_TOOLS_PATH ?= $(WORKSPACE)\BaseTools
+else
+export WORKSPACE?=$(PWD)
+endif
+
+# Define the destination of the Firmware Image Package (FIP) if not defined
+ifndef FVP_FIP
+  ifdef DEST_BIN_ROOT
+    FVP_FIP=$(DEST_BIN_ROOT)/fip.bin
+  else
+    FVP_FIP=fip.bin
+  endif
+endif
+
+SHELL := /bin/bash
+SILENT ?= @
+ECHO ?= echo
+MAKE ?= make -i -k
+RM ?= rm -f
+CP ?= cp
+
+.PHONY: all clean
+
+EDK2_CONF = Conf/BuildEnv.sh Conf/build_rule.txt Conf/target.txt Conf/tools_def.txt
+
+all: $(EDK2_CONF)
+ifeq ("$(OS)","Windows_NT")
+	build -a $(EDK2_ARCH) -p $(EDK2_DSC) -t $(EDK2_TOOLCHAIN) -b $(EDK2_BUILD) $(EDK2_MACROS)
+else
+	. ./edksetup.sh; GCC49_AARCH64_PREFIX=$(GCC49_AARCH64_PREFIX) build -a $(EDK2_ARCH) -p $(EDK2_DSC) -t $(EDK2_TOOLCHAIN) -b $(EDK2_BUILD) $(EDK2_MACROS)
+endif
+ifeq ("$(OS)","Windows_NT")
+	$(SILENT)$(ECHO) "Warning: The UEFI Firmware must be added to the Firmware Image Package (FIP)."
+else
+	$(SILENT)which fip_create ; \
+	if [ $$? -ne 0 ]; then \
+		$(ECHO) "Warning: 'fip_create' tool is not in the PATH. The UEFI binary will not be added in the Firmware Image Package (FIP)."; \
+	else \
+		fip_create --bl33 $(WORKSPACE)/Build/ArmVExpress-FVP-AArch64-Minimal/$(EDK2_BUILD)_$(EDK2_TOOLCHAIN)/FV/BL33_AP_UEFI.fd --dump $(FVP_FIP); \
+	fi
+endif
+
+$(EDK2_CONF):
+ifeq ("$(OS)","Windows_NT")
+	copy $(EDK_TOOLS_PATH)\Conf\build_rule.template Conf\build_rule.txt
+	copy $(EDK_TOOLS_PATH)\Conf\FrameworkDatabase.template Conf\FrameworkDatabase.txt
+	copy $(EDK_TOOLS_PATH)\Conf\target.template Conf\target.txt
+	copy $(EDK_TOOLS_PATH)\Conf\tools_def.template Conf\tools_def.txt
+else
+	. ./edksetup.sh; $(MAKE) -C BaseTools
+endif
+
+clean:
+ifeq ("$(OS)","Windows_NT")
+	build -a $(EDK2_ARCH) -p $(EDK2_DSC) -t $(EDK2_TOOLCHAIN) -b $(EDK2_BUILD) $(EDK2_MACROS) cleanall
+else
+	. ./edksetup.sh; build -a $(EDK2_ARCH) -p $(EDK2_DSC) -t $(EDK2_TOOLCHAIN) -b $(EDK2_BUILD) $(EDK2_MACROS) cleanall; \
+	rm -Rf $(EDK2_CONF) Conf/.cache
+endif