From 418816ec562da333373c1d79d3974dcc7379c4f2 Mon Sep 17 00:00:00 2001 From: Sanjay Singh Rawat Date: Thu, 14 Feb 2013 11:18:25 +0530 Subject: documentation: add regulator related information Add information about the regulator state and status field. Signed-off-by: Sanjay Singh Rawat --- doc.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 doc.txt (limited to 'doc.txt') diff --git a/doc.txt b/doc.txt new file mode 100644 index 0000000..36ffc46 --- /dev/null +++ b/doc.txt @@ -0,0 +1,20 @@ +Regulator related information +============================= +Regulator fields "state" and "status" give below information about the regulator. + +- state: field tell whether regulator is enabled or disabled. Following are the states + | - Enabled + | - Disabled + | - Unknown (if unable to determine) + | + | + ----> status: When enabled, depending on the regulator hardware capability(modes) and runtime requirement; regulators are set to specific modes. The status field gives a little + more specific information about the current "state" of the regulator, which operating modes it is in. Following can be the possible status: + - Idle + - Fast + - Normal + - Standby + - Bypass + - Error + - Undefined + - On/Off -- cgit v1.2.3