diff options
Diffstat (limited to 'INSTALL/FAQ')
-rw-r--r-- | INSTALL/FAQ | 738 |
1 files changed, 461 insertions, 277 deletions
diff --git a/INSTALL/FAQ b/INSTALL/FAQ index 343243ddb17..17ebaa19b0f 100644 --- a/INSTALL/FAQ +++ b/INSTALL/FAQ @@ -1,322 +1,506 @@ -egcs Frequently Asked Questions - + egcs Frequently Asked Questions + + 1. [1]How is egcs be different from gcc2? + 2. [2]What is an open development model? + 3. [3]Releases and Forking + 4. [4]bits/libc-lock.h: No such file or directory + 5. [5]`_IO_stdfile_0_lock' was not declared in this scope + 6. [6]Problems building the Fortran compiler + 7. [7]Problems building on MIPS platforms + 8. [8]Problems with exception handling on x86 platforms + 9. [9]Bootstrap comparison failures on HPs + 10. [10]Bootstrap loops rebuilding cc1 over and over + 11. [11]Dynamic linker is unable to find GCC libraries + 12. [12]libstdc++/libio tests fail badly with --enable-shared + 13. [13]Unable to run the testsuite + 14. [14]How to build a cross compiler + 15. [15]How to install both gcc2 and egcs + 16. [16]Snapshots, how, when, why + 17. [17]Problems building Linux kernels + 18. [18]Virtual memory exhausted + 19. [19]GCC can not find GAS + 20. [20]egcs does not work on Red Hat 5.0 + 21. [21]Unable to bootstrap on x86 Solaris2.{5,6} + 22. [22]EGCS with Windows + 23. [23]cpp: Usage:... Error + [24]EGCS will not build KDE + _____________________________________________________________ + How is egcs be different from gcc2? -Six years ago, gcc version 1 had reached a point of stability. For the -targets it could support, it worked well. It had limitations inherent in -its design that would be difficult to resolve, so a major effort was made -and gcc version 2 was the result. When we had gcc2 in a useful state, -development efforts on gcc1 stopped and we all concentrated on making -gcc2 better than gcc1 could ever be. This is the kind of step forward -we want to make with egcs. - -In brief, the three biggest differences between egcs and gcc2 are -these: - - - More rexamination of basic architectual decisions of - gcc and an interest in adding new optimizations; - - working with the groups who have fractured out from gcc2 (like - the Linux folks, the Intel optimizations folks, Fortran folks) - including more front-ends; and finally - - An open development model (see below) for the development process. - - -These three differences will work together to result in a more -useful compiler, a more stable compiler, a central compiler that works -for more people, a compiler that generates better code. - - -There are a lot of exciting compiler optimizations that have come -out. We want them in gcc. There are a lot of front ends out there for -gcc for languages like Fortran or Pascal. We want them easily -installable by users. After six years of working on gcc2, we've come -to see problems and limitations in the way gcc is architected; it is -time to address these again. - - + Six years ago, gcc version 1 had reached a point of stability. For + the targets it could support, it worked well. It had limitations + inherent in its design that would be difficult to resolve, so a + major effort was made and gcc version 2 was the result. When we + had gcc2 in a useful state, development efforts on gcc1 stopped + and we all concentrated on making gcc2 better than gcc1 could ever + be. This is the kind of step forward we want to make with egcs. + In brief, the three biggest differences between egcs and gcc2 are + these: + + More rexamination of basic architectual decisions of gcc and + an interest in adding new optimizations; + + working with the groups who have fractured out from gcc2 + (like the Linux folks, the Intel optimizations folks, Fortran + folks) including more front-ends; and finally + + An open development model ([25]see below) for the development + process. + These three differences will work together to result in a more + useful compiler, a more stable compiler, a central compiler that + works for more people, a compiler that generates better code. + There are a lot of exciting compiler optimizations that have come + out. We want them in gcc. There are a lot of front ends out there + for gcc for languages like Fortran or Pascal. We want them easily + installable by users. After six years of working on gcc2, we've + come to see problems and limitations in the way gcc is + architected; it is time to address these again. + _____________________________________________________________ + What is an open development model? -With egcs, we are going to try a bazaar style[1] approach to its -development: We're going to be making snapshots publically available -to anyone who wants to try them; we're going to welcome anyone to join -the development mailing list. All of the discussions on the -development mailing list are available via the web. We're going to be -making releases with a much higher frequency than they have been made -in the past: We're shooting for three by the end of 1997. - -In addition to weekly snapshots of the egcs development sources, we -are going to look at making the sources readable from a CVS server by -anyone. We want to make it so external maintainers of parts of egcs -are able to commit changes to their part of egcs directly into the -sources without going through an intermediary. - -There have been many potential gcc developers who were not able to -participate in gcc development in the past. We these people to help in -any way they can; we ultimately want gcc to be the best compiler in the -world. - -A compiler is a complicated piece of software, there will still be -strong central maintainers who will reject patches, who will demand -documentation of implementations, and who will keep the level of -quality as high as it is today. Code that could use wider testing may -be intergrated--code that is simply ill-conceived won't be. - -egcs is not the first piece of software to use this open development -process; FreeBSD, the Emacs lisp repository, and Linux are a few -examples of the bazaar style of development. - -With egcs, we will be adding new features and optimizations at a -rate that has not been done since the creation of gcc2; these additions -will inevitably have a temporarily destabilizing effect. With the help -of developers working together with this bazaar style development, the -resulting stability and quality levels will be better than we've had -before. - -cathedral-vs-bazaar[1] - We've been discussing different development models a lot over the - past few months. The paper which started all of this introduced two - terms: A cathedral development model versus a bazaar - development model. The paper is written by Eric S. Raymond, it is - called `` http://locke.ccil.org/~esr/writings/cathedral.html" The - Cathedral and the Bazaar''. The paper is a useful starting point - for discussions. - - - + With egcs, we are going to try a bazaar style[26][1] approach to + its development: We're going to be making snapshots publicly + available to anyone who wants to try them; we're going to welcome + anyone to join the development mailing list. All of the + discussions on the development mailing list are available via the + web. We're going to be making releases with a much higher + frequency than they have been made in the past: We're shooting for + three by the end of 1997. + In addition to weekly snapshots of the egcs development sources, + we are going to look at making the sources readable from a CVS + server by anyone. We want to make it so external maintainers of + parts of egcs are able to commit changes to their part of egcs + directly into the sources without going through an intermediary. + There have been many potential gcc developers who were not able to + participate in gcc development in the past. We these people to + help in any way they can; we ultimately want gcc to be the best + compiler in the world. + A compiler is a complicated piece of software, there will still be + strong central maintainers who will reject patches, who will + demand documentation of implementations, and who will keep the + level of quality as high as it is today. Code that could use wider + testing may be intergrated--code that is simply ill-conceived + won't be. + egcs is not the first piece of software to use this open + development process; FreeBSD, the Emacs lisp repository, and Linux + are a few examples of the bazaar style of development. + With egcs, we will be adding new features and optimizations at a + rate that has not been done since the creation of gcc2; these + additions will inevitably have a temporarily destabilizing effect. + With the help of developers working together with this bazaar + style development, the resulting stability and quality levels will + be better than we've had before. + + [1] We've been discussing different development models a lot over + the past few months. The paper which started all of this introduced + two terms: A cathedral development model versus a bazaar + development model. The paper is written by Eric S. Raymond, it is + called ``[27]The Cathedral and the Bazaar''. The paper is a useful + starting point for discussions. + _____________________________________________________________ + +Releases and Forking? + + Some folks have questioned whether or not making releases is + consistent with the goals of the egcs project and whether or not + making releases is a fork from gcc2. + +The egcs project has several goals, including: + + * Experimenting with a new development model, release process and + release packaging, + + * Using the new development model to accelerate development of new + features, optimizations, etc for future inclusion in gcc, + + * Providing high quality releases to the public. + +An egcs release is a copy of the egcs sources that the developers have +tested and are believed to be suitable for wider scale use and testing. + +Making releases of stable, tested sources is both a goal and a means by +which we hope to achieve other goals of the egcs project. + +The existence of a stable tested release allows egcs to be more thoroughly +used and tested by a wider audience than is capable of testing snapshots. +The expanded audience provides developers with critical feedback in a +timely manner, which is beneficial to GCC as a whole and is consistent with +the stated goals of egcs. + +The gcc maintainers are encouraged to migrate tested fixes and new features +from egcs into gcc at their discretion. egcs maintainers are willing to +assist the gcc maintainers as time permits. egcs periodically merges in +changes from gcc into the egcs sources. + +What will keep egcs from becoming a fork is cooperation between the +developers of gcc and egcs. + +We don't see this situation as significantly different than other projects +that make releases based on some version of the gcc sources (Cygnus, g77, +etc). All the code is still available for inclusion in gcc at the discretion +of the gcc maintainers. + _____________________________________________________________ + bits/libc-lock.h: No such file or directory -egcs includes a tightly integrated libio and libstdc++ implementation which -can cause problems on hosts which have libio integrated into their C library -(most notably Linux). - -We believe that we've solved the major technical problems for the most -common versions of libc found on Linux systems. However, some versions -of Linux use pre-release versions of glibc2, which egcs has trouble detecting -and correctly handling. - -If you're using one of these pre-release versions of glibc2, you may get -a message "bits/libc-lock.h: No such file or directory" when building egcs. -Unfortunately, to fix this problem you will need to update your C library to -glibc2.0.5c. - -Late breaking news: we may have at least a partial solution for these -problems. So this FAQ entry may no longer be needed. - + This entry should be obsolete, egcs should handle these beta + versions of glibc2 correctly. + egcs includes a tightly integrated libio and libstdc++ + implementation which can cause problems on hosts which have libio + integrated into their C library (most notably Linux). + We believe that we've solved the major technical problems for the + most common versions of libc found on Linux systems. However, some + versions of Linux use pre-release versions of glibc2, which egcs + has trouble detecting and correctly handling. + If you're using one of these pre-release versions of glibc2, you + may get a message "bits/libc-lock.h: No such file or directory" + when building egcs. Unfortunately, to fix this problem you will + need to update your C library to glibc2.0.5c. + _____________________________________________________________ + `_IO_stdfile_0_lock' was not declared in this scope -If you get this error, it means either egcs incorrectly guessed what version -of libc is installed on your linux system, or you incorrectly specified a -version of glibc when configuring egcs. - -If you did not provide a target name when configuring egcs, then you've -found a bug which needs to be reported. If you did provide a target name at -configure time, then you should reconfigure without specifying a target name. - + If you get this error, it means either egcs incorrectly guessed + what version of libc is installed on your linux system, or you + incorrectly specified a version of glibc when configuring egcs. + If you did not provide a target name when configuring egcs, then + you've found a bug which needs to be reported. If you did provide + a target name at configure time, then you should reconfigure + without specifying a target name. + _____________________________________________________________ + Problems building the Fortran compiler -The Fortran front end can not be built with most vendor compilers; it must -be built with gcc. As a result, you may get an error if you do not follow -the install instructions carefully. - -In particular, instead of using "make" to build egcs, you should use -"make bootstrap" if you are building a native compiler or "make cross" -if you are building a cross compiler. - -It has also been reported that the Fortran compiler can not be built -on Red Hat 4.X linux for the Alpha. Fixing this may require upgrading -binutils or to Red Hat 5.0; we'll provide more information as it becomes -available. - + The Fortran front end can not be built with most vendor compilers; + it must be built with gcc. As a result, you may get an error if + you do not follow the install instructions carefully. + In particular, instead of using "make" to build egcs, you should + use "make bootstrap" if you are building a native compiler or + "make cross" if you are building a cross compiler. + It has also been reported that the Fortran compiler can not be + built on Red Hat 4.X linux for the Alpha. Fixing this may require + upgrading binutils or to Red Hat 5.0; we'll provide more + information as it becomes available. + _____________________________________________________________ + Problems building on MIPS platforms -egcs requires the use of GAS on all versions of Irix, except Irix 6 due -to limitations in older Irix assemblers. - Either of these messages indicates that you are using the MIPS assembler -when instead you should be using GAS. + egcs requires the use of GAS on all versions of Irix, except Irix + 6 due to limitations in older Irix assemblers. + Either of these messages indicates that you are using the MIPS + assembler when instead you should be using GAS. as0: Error: ./libgcc2.c, line 1:Badly delimited numeric literal .4byte $LECIE1-$LSCIE1 as0: Error: ./libgcc2.c, line 1:malformed statement - - - - as0: Error: /home/law/egcs_release/gcc/libgcc2.c, line 1:undefined symbol in expression + _____________________________________________________________ + + as0: Error: /home/law/egcs_release/gcc/libgcc2.c, line 1:undefined symbol i +n expression .word $LECIE1-$LSCIE1 - - For Irix 6, you should use the native assembler as GAS is not supported -on Irix 6. - - + For Irix 6, you should use the native assembler as GAS is not + supported on Irix 6. + _____________________________________________________________ + Problems with exception handling on x86 platforms -If you are using the GNU assembler (aka gas) on an x86 platform and -exception handling is not working correctly, then odds are you're using a -buggy assembler. - -We recommend binutils-2.8.0.1.15 or newer. -"ftp://tsx-11.mit.edu/pub/linux/packages/GCC/binutils-2.8.1.0.15.tar.gz binutils-2.8.0.1.15 source -ftp://tsx-11.mit.edu/pub/linux/packages/GCC/binutils-2.8.1.0.15.bin.tar.gz binutils-2.8.0.1.15 x86 binary for libc5 -ftp://tsx-11.mit.edu/pub/linux/packages/GCC/binutils-2.8.1.0.15.glibc.bin.tar.gz binutils-2.8.0.1.15 x86 binary for glibc2 -Or, you can try a -ftp://ftp.cygnus.com/pub/egcs/infrastructure/gas-970915.tar.gz binutils snapshot; however, be aware that the binutils snapshot is untested -and may not work (or even build). Use it at your own risk. - + If you are using the GNU assembler (aka gas) on an x86 platform + and exception handling is not working correctly, then odds are + you're using a buggy assembler. + We recommend binutils-2.8.1.0.15 or newer. + [28]binutils-2.8.1.0.15 source + [29]binutils-2.8.1.0.15 x86 binary for libc5 + [30]binutils-2.8.1.0.15 x86 binary for glibc2 Or, you can try a + [31]binutils snapshot; however, be aware that the binutils + snapshot is untested and may not work (or even build). Use it at + your own risk. + _____________________________________________________________ + Bootstrap comparison failures on HPs -If you bootstrap the compiler on hpux10 using the HP assembler instead of -gas, every file will fail the comparison test. - -The HP asembler inserts timestamps into object files it creates, causing -every file to be different. The location of the timestamp varies for each -object file, so there's no real way to work around this mis-feature. - -Odds are your compiler is fine, but there's no way to be certain. - -If you use GAS on HPs, then you will not run into this problem because -GAS never inserts timestamps into object files. For this and various other -reasons we highly recommend using GAS on HPs. - + If you bootstrap the compiler on hpux10 using the HP assembler + instead of gas, every file will fail the comparison test. + The HP asembler inserts timestamps into object files it creates, + causing every file to be different. The location of the timestamp + varies for each object file, so there's no real way to work around + this mis-feature. + Odds are your compiler is fine, but there's no way to be certain. + If you use GAS on HPs, then you will not run into this problem + because GAS never inserts timestamps into object files. For this + and various other reasons we highly recommend using GAS on HPs. + _____________________________________________________________ + Bootstrap loops rebuilding cc1 over and over -When building egcs, the build process loops rebuilding cc1 over and -over again. This happens on mips-sgi-irix5.2, and possibly other platforms. - -This is probably a bug somewhere in the egcs Makefile. Until we find and -fix this bug we recommend you use GNU make instead of vendor supplied make -programs. - + When building egcs, the build process loops rebuilding cc1 over + and over again. This happens on mips-sgi-irix5.2, and possibly + other platforms. + This is probably a bug somewhere in the egcs Makefile. Until we + find and fix this bug we recommend you use GNU make instead of + vendor supplied make programs. + _____________________________________________________________ + Dynamic linker is unable to find GCC libraries -This problem manifests itself by programs not finding shared libraries -they depend on when the programs are started. Note this problem often manifests -itself with failures in the libio/libstdc++ tests after configuring with ---enable-shared and building egcs. - -GCC does not specify a runpath so that the dynamic linker can find dynamic -libraries at runtime. - -The short explaination is that if you always pass a -R option to the -linker, then your programs become dependent on directories which -may be NFS mounted, and programs may hang unnecessarily when an -NFS server goes down. - -The problem is not programs that do require the directories; those -programs are going to hang no matter what you do. The problem is -programs that do not require the directories. - -SunOS effectively always passed a -R option for every -L option; -this was a bad idea, and so it was removed for Solaris. We should -not recreate it. - + This problem manifests itself by programs not finding shared + libraries they depend on when the programs are started. Note this + problem often manifests itself with failures in the + libio/libstdc++ tests after configuring with --enable-shared and + building egcs. + GCC does not specify a runpath so that the dynamic linker can find + dynamic libraries at runtime. + The short explaination is that if you always pass a -R option to + the linker, then your programs become dependent on directories + which may be NFS mounted, and programs may hang unnecessarily when + an NFS server goes down. + The problem is not programs that do require the directories; those + programs are going to hang no matter what you do. The problem is + programs that do not require the directories. + SunOS effectively always passed a -R option for every -L option; + this was a bad idea, and so it was removed for Solaris. We should + not recreate it. + _____________________________________________________________ + Unable to run the testsuite -If you get a message about unable to find "standard.exp" when trying to -run the egcs testsuites, then your dejagnu is too old to run the egcs tests. -You will need to get a newer version of dejagnu; we've made a -<a href="ftp://ftp.cygnus.com/pub/egcs/infrastructure/dejagnu-971028.tar.gz"> -dejagnu snapshot available until a new version of dejagnu can be released. - + If you get a message about unable to find "standard.exp" when + trying to run the egcs testsuites, then your dejagnu is too old to + run the egcs tests. You will need to get a newer version of + dejagnu; we've made a [32]dejagnu snapshot available until a new + version of dejagnu can be released. + _____________________________________________________________ + How to build a cross compiler - Building cross compilers is a rather complex undertaking because they -usually need additional software (cross assembler, cross linker, target -libraries, target include files, etc). - - We recommend reading the <a href="ftp://ftp.cygnus.com/pub/embedded/crossgcc/FAQ-0.8.1"> -crossgcc FAQ for information about building cross compilers. - - If you have all the pieces available, then `make cross' should build a -cross compiler. `make LANGUAGES="c c++" install'will install the cross -compiler. - - Note that if you're trying to build a cross compiler in a tree which -includes binutils-2.8 in addition to egcs, then you're going to need to -make a couple minor tweaks so that the cross assembler, linker and -nm utilities will be found. - -binutils-2.8 builds those files as gas.new, ld.new and nm.new; egcs gcc -looks for them using gas-new, ld-new and nm-new, so you may have to arrange -for any symlinks which point to <file>.new to be changed to <file>-new. - + Building cross compilers is a rather complex undertaking because + they usually need additional software (cross assembler, cross + linker, target libraries, target include files, etc). + We recommend reading the [33]crossgcc FAQ for information about + building cross compilers. + If you have all the pieces available, then `make cross' should + build a cross compiler. `make LANGUAGES="c c++" install'will + install the cross compiler. + Note that if you're trying to build a cross compiler in a tree + which includes binutils-2.8 in addition to egcs, then you're going + to need to make a couple minor tweaks so that the cross assembler, + linker and nm utilities will be found. + binutils-2.8 builds those files as gas.new, ld.new and nm.new; + egcs gcc looks for them using gas-new, ld-new and nm-new, so you + may have to arrange for any symlinks which point to <file>.new + to be changed to <file>-new. + _____________________________________________________________ + Snapshots, how, when, why - We make snapshots of the egcs sources about once a week; there is no -predetermined schedule. These snapshots are intended to give everyone -access to work in progress. Any given snapshot may generate incorrect code -or even fail to build. - -If you plan on downloading and using snapshots, we highly recommend you -subscribe to the egcs mailing lists. See <a href="index.html#mailinglists"> -mailing lists on the main egcs page for instructions on how to subscribe. - -When using the diff files to update from older snapshots to newer snapshots, -make sure to use "-E" and "-p" arguments to patch so that empty files are -deleted and full pathnames are provided to patch. If your version of -patch does not support "-E", you'll need to get a newer version. Also note -that you may need autoconf, autoheader and various other programs if you use -diff files to update from one snapshot to the next. - + We make snapshots of the egcs sources about once a week; there is + no predetermined schedule. These snapshots are intended to give + everyone access to work in progress. Any given snapshot may + generate incorrect code or even fail to build. + If you plan on downloading and using snapshots, we highly + recommend you subscribe to the egcs mailing lists. See [34]mailing + lists on the main egcs page for instructions on how to subscribe. + When using the diff files to update from older snapshots to newer + snapshots, make sure to use "-E" and "-p" arguments to patch so + that empty files are deleted and full pathnames are provided to + patch. If your version of patch does not support "-E", you'll need + to get a newer version. Also note that you may need autoconf, + autoheader and various other programs if you use diff files to + update from one snapshot to the next. + _____________________________________________________________ + How to install both egcs and gcc2 -It may be desirable to install both egcs and gcc2 on the same system. This -can be done by using different prefix paths at configure time and a few -symlinks. - -Basically, configure the two compilers with different --prefix options, -then build and install each compiler. Assume you want "gcc" to be the egcs -compiler and available in /usr/local/bin; also assume that you want "gcc2" -to be the gcc2 compiler and also available in /usr/local/bin. - -The easiest way to do this is to configure egcs with --prefix=/usr/local/egcs -and gcc2 with --prefix=/usr/local/gcc2. Build and install both compilers. -Then make a symlink from /usr/local/bin/gcc to /usr/local/egcs/bin/gcc and -from /usr/local/bin/gcc2 to /usr/local/gcc2/bin/gcc. Create similar links -for the "g++", "c++" and "g77" compiler drivers. - + It may be desirable to install both egcs and gcc2 on the same + system. This can be done by using different prefix paths at + configure time and a few symlinks. + Basically, configure the two compilers with different --prefix + options, then build and install each compiler. Assume you want + "gcc" to be the egcs compiler and available in /usr/local/bin; + also assume that you want "gcc2" to be the gcc2 compiler and also + available in /usr/local/bin. + The easiest way to do this is to configure egcs with + --prefix=/usr/local/egcs and gcc2 with --prefix=/usr/local/gcc2. + Build and install both compilers. Then make a symlink from + /usr/local/bin/gcc to /usr/local/egcs/bin/gcc and from + /usr/local/bin/gcc2 to /usr/local/gcc2/bin/gcc. Create similar + links for the "g++", "c++" and "g77" compiler drivers. + _____________________________________________________________ + Problems building Linux kernels -If you installed a recent binutils/gas snapshot on your Linux system, -you may not be able to build the kernel because objdump does not understand -the "-k" switch. The solution for this problem is to remove /usr/bin/encaps. -You may get an internal compiler error compiling process.c in newer -versions of the Linux kernel on x86 machines. This is a bug in an asm -statement in process.c, not a bug in egcs. XXX How to fix?!? + If you installed a recent binutils/gas snapshot on your Linux + system, you may not be able to build the kernel because objdump + does not understand the "-k" switch. The solution for this problem + is to remove /usr/bin/encaps. + The reason you must remove /usr/bin/encaps is because it is an + obsolete program that was part of older binutils distributions; + the Linux kernel's Makefile looks for this program to decide if + you have an old or a new binutils. Problems occur if you installed + a new binutils but haven't removed encaps, because the Makefile + thinks you have the old one. So zap it; trust us, you won't miss + it. + You may get an internal compiler error compiling process.c in + newer versions of the Linux kernel on x86 machines. This is a bug + in an asm statement in process.c, not a bug in egcs. XXX How to + fix?!? + You may get errors with the X driver of the form -You may get errors with the X driver of the form _X11TransSocketUNIXConnect: Can't connect: errno = 111 - -It's a kernel bug. The function sys_iopl in arch/i386/kernel/process.c -does an illegal hack which used to work but is now broken since GCC optimizes -more aggressively . The newer 2.1.x kernels already have a fix which should -also work in 2.0.32. - - + It's a kernel bug. The function sys_iopl in + arch/i386/kernel/ioport.c does an illegal hack which used to work + but is now broken since GCC optimizes more aggressively . The + newer 2.1.x kernels already have a fix which should also work in + 2.0.32. + _____________________________________________________________ + Virtual memory exhausted error - This error means your system ran out of memory; this can happen for large -files, particularly when optimizing. If you're getting this error you should -consider trying to simplify your files or reducing the optimization level. - -Note that using -pedantic or -Wreturn-type can cause an explosion in the -amount of memory needed for template-heavy C++ code, such as code that uses -STL. Also note that -Wall includes -Wreturn-type, so if you use -Wall you -will need to specify -Wno-return-type to turn it off. - + This error means your system ran out of memory; this can happen + for large files, particularly when optimizing. If you're getting + this error you should consider trying to simplify your files or + reducing the optimization level. + Note that using -pedantic or -Wreturn-type can cause an explosion + in the amount of memory needed for template-heavy C++ code, such + as code that uses STL. Also note that -Wall includes + -Wreturn-type, so if you use -Wall you will need to specify + -Wno-return-type to turn it off. + _____________________________________________________________ + GCC can not find GAS -Some configurations like irix4, irix5, hpux* require the use of the GNU -assembler intead of the system assembler. To ensure that egcs finds the GNU -assembler, you should configure the GNU assembler with the same --prefix -option as you used for egcs. Then build & install the GNU assembler. - + Some configurations like irix4, irix5, hpux* require the use of + the GNU assembler intead of the system assembler. To ensure that + egcs finds the GNU assembler, you should configure the GNU + assembler with the same --prefix option as you used for egcs. Then + build & install the GNU assembler. After the GNU assembler has + been installed, proceed with building egcs. + _____________________________________________________________ + egcs does not work on Red Hat 5.0 - egcs does not currently work with Red Hat 5.0; we'll update this -entry with more information as it becomes available. - -Last modified: December 2, 1997 + This entry is obsolete with the release of egcs-1.0.1 which should + handle Red Hat 5.0 correctly. + egcs-1.0 does not currently work with Red Hat 5.0 on some + platforms; we'll update this entry with more information as it + becomes available. + You may want to try this [35]proposed patch for Red Hat 5.0. + Please let us know if you use this patch and whether or not it + works. + _____________________________________________________________ + +Unable to bootstrap on x86 Solaris 2.{5,6} + + This entry is obsolete with the release of egcs-1.0.1 which should + handle x86 Solaris systems correctly. + This patch should fix the problem + +Index: t-sol2 +=================================================================== +RCS file: /cvs/cvsfiles/egcs/gcc/config/i386/t-sol2,v +retrieving revision 1.2 +diff -c -3 -p -r1.2 t-sol2 +*** t-sol2 1997/09/04 23:54:04 1.2 +--- t-sol2 1997/12/04 07:19:07 +*************** crtn.o: $(srcdir)/config/i386/sol2-cn.as +*** 31,36 **** + # to produce a shared library, but since we don't know ahead of time when + # we will be doing that, we just always use -fPIC when compiling the + # routines in crtstuff.c. + +! CRTSTUFF_T_CFLAGS = -fPIC + TARGET_LIBGCC2_CFLAGS = -fPIC +--- 31,40 ---- + # to produce a shared library, but since we don't know ahead of time when + # we will be doing that, we just always use -fPIC when compiling the + # routines in crtstuff.c. ++ # ++ # We must also enable optimization to avoid having any code appear after ++ # the call & alignment statement, but before we switch back to the ++ # .text section. + +! CRTSTUFF_T_CFLAGS = -fPIC -O2 + TARGET_LIBGCC2_CFLAGS = -fPIC + _____________________________________________________________ + +EGCS with Windows + + egcs does not currently support windows, either natively or with + the cygwin32 dll. However Mumit Khan has been working on + supporting Windows with egcs. You should check out his site if + you're interested in Windows support. [36]GNU Win32 related + projects + _____________________________________________________________ + +cpp: Usage:... Error + + If you get an error like this when building egcs (particularly + when building __mulsi3), then you likely have a problem with your + environment variables. + +cpp: Usage: /usr/lib/gcc-lib/i586-unknown-linux-gnulibc1/2.7.2.3/cpp +[switches] input output + First look for an explicit '.' in either LIBRARY_PATH or + GCC_EXEC_PREFIX from your environment. If you do not find an + explicit '.', look for an empty pathname in those variables. Note + that ':' at either the start or end of these variables is an + implicit '.' and will cause problems. + _____________________________________________________________ + +EGCS will not build KDE + + Previous versions of g++ accepted (as a GNU extension) + constructor-arguments for the objects in an array of objects + dynamically allocated with new. Here's an example of this + construct: + + struct S { S(int); } + void f() { new S[3](6); } + However, this construct is not allowed by the ANSI/ISO Standard, + and is no longer accepted by g++. + KDE uses such constructs and therefore will not build with egcs; + note patches are available to fix KDE. + _____________________________________________________________ + + [37]Return to the egcs home page + Last modified: Jan 2, 1998 + +References + + 1. file://localhost/home/law/INSTALL/faq.html#gcc-2-diff + 2. file://localhost/home/law/INSTALL/faq.html#open-development + 3. file://localhost/home/law/INSTALL/faq.html#release-fork + 4. file://localhost/home/law/INSTALL/faq.html#libc-lock + 5. file://localhost/home/law/INSTALL/faq.html#morelibc + 6. file://localhost/home/law/INSTALL/faq.html#fortran + 7. file://localhost/home/law/INSTALL/faq.html#mips + 8. file://localhost/home/law/INSTALL/faq.html#x86eh + 9. file://localhost/home/law/INSTALL/faq.html#hpcompare + 10. file://localhost/home/law/INSTALL/faq.html#makebugs + 11. file://localhost/home/law/INSTALL/faq.html#rpath + 12. file://localhost/home/law/INSTALL/faq.html#rpath + 13. file://localhost/home/law/INSTALL/faq.html#dejagnu + 14. file://localhost/home/law/INSTALL/faq.html#cross + 15. file://localhost/home/law/INSTALL/faq.html#multiple + 16. file://localhost/home/law/INSTALL/faq.html#snapshot + 17. file://localhost/home/law/INSTALL/faq.html#linuxkernel + 18. file://localhost/home/law/INSTALL/faq.html#memexhausted + 19. file://localhost/home/law/INSTALL/faq.html#gas + 20. file://localhost/home/law/INSTALL/faq.html#rh5.0 + 21. file://localhost/home/law/INSTALL/faq.html#x86solaris + 22. file://localhost/home/law/INSTALL/faq.html#windows + 23. file://localhost/home/law/INSTALL/faq.html#environ + 24. file://localhost/home/law/INSTALL/faq.html#kde + 25. file://localhost/home/law/INSTALL/faq.html#open-development + 26. file://localhost/home/law/INSTALL/faq.html#cathedral-vs-bazaar + 27. http://locke.ccil.org/~esr/writings/cathedral.html + 28. ftp://tsx-11.mit.edu/pub/linux/packages/GCC/binutils-2.8.1.0.15.tar.gz + 29. ftp://tsx-11.mit.edu/pub/linux/packages/GCC/binutils-2.8.1.0.15.bin.tar.gz + 30. ftp://tsx-11.mit.edu/pub/linux/packages/GCC/binutils-2.8.1.0.15.glibc.bin.tar.gz + 31. ftp://ftp.cygnus.com/pub/egcs/infrastructure/gas-970915.tar.gz + 32. ftp://ftp.cygnus.com/pub/egcs/infrastructure/dejagnu-971222.tar.gz + 33. ftp://ftp.cygnus.com/pub/embedded/crossgcc/FAQ-0.8.1 + 34. file://localhost/home/law/INSTALL/index.html#mailinglists + 35. http://www.cygnus.com/ml/egcs/1997-Dec/0594.html + 36. http://www.xraylith.wisc.edu/~khan/software/gnu-win32 + 37. file://localhost/home/law/INSTALL/index.html |