* Imported zlib 1.2.3; merged local changes.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@104184 138bc75d-0d04-0410-961f-82ee72b054a4

16 files changed, 388 insertions, 898 deletions

diff --git a/zlib/contrib/README.contrib b/zlib/contrib/README.contrib
index 8860f31e527..20afc621541 100644
--- a/zlib/contrib/README.contrib
+++ b/zlib/contrib/README.contrib
@@ -19,8 +19,8 @@ blast/      by Mark Adler <madler@alumni.caltech.edu>
 delphi/     by Cosmin Truta <cosmint@cs.ubbcluj.ro>
         Support for Delphi and C++ Builder
 
-gzappend/   by Mark Adler <madler@alumni.caltech.edu>
-        append to a gzip file -- illustrates the use of Z_BLOCK
+dotzlib/    by Henrik Ravn <henrik@ravn.com>
+        Support for Microsoft .Net and Visual C++ .Net
 
 infback9/   by Mark Adler <madler@alumni.caltech.edu>
         Unsupported diffs to infback to decode the deflate64 format
@@ -42,6 +42,10 @@ masm686/    by Dan Higdon <hdan@kinesoft.com>
             and Chuck Walbourn <chuckw@kinesoft.com>
         asm code for Pentium Pro/PII, using the MASM syntax
 
+masmx64/    by Gilles Vollant <info@winimage.com>
+	x86 64-bit (AMD64 and Intel EM64t) code for x64 assembler to
+	replace longest_match() and inflate_fast()
+
 masmx86/    by Gilles Vollant <info@winimage.com>
         x86 asm code to replace longest_match() and inflate_fast(),
         for Visual C++ and MASM
@@ -60,11 +64,8 @@ puff/       by Mark Adler <madler@alumni.caltech.edu>
 testzlib/   by Gilles Vollant <info@winimage.com>
         Example of the use of zlib
 
-untgz/      by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+untgz/      by Pedro A. Aranda Gutierrez <paag@tid.es>
         A very simple tar.gz file extractor using zlib
 
-visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
-        How to use compress(), uncompress() and the gz* functions from VB
-
 vstudio/    by Gilles Vollant <info@winimage.com>
-        Building zlib with Visual Studio .NET
+        Building a minizip-enhanced zlib with Microsoft Visual Studio
diff --git a/zlib/contrib/asm586/match.S b/zlib/contrib/asm586/match.S
index 8f1614078f8..0368b35fe3a 100644
--- a/zlib/contrib/asm586/match.S
+++ b/zlib/contrib/asm586/match.S
@@ -45,19 +45,29 @@
  * program to crash horribly, without so much as a warning at
  * compile time. Sigh.)
  */
-#define	dsWSize			36
-#define	dsWMask			44
-#define	dsWindow		48
-#define	dsPrev			56
-#define	dsMatchLen		88
-#define	dsPrevMatch		92
-#define	dsStrStart		100
-#define	dsMatchStart		104
-#define	dsLookahead		108
-#define	dsPrevLen		112
-#define	dsMaxChainLen		116
-#define	dsGoodMatch		132
-#define	dsNiceMatch		136
+
+/* All the +zlib1222add offsets are due to the addition of fields
+ *  in zlib in the deflate_state structure since the asm code was first written
+ * (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+ * (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+ * if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
+ */
+
+#define zlib1222add		(8)
+
+#define	dsWSize			(36+zlib1222add)
+#define	dsWMask			(44+zlib1222add)
+#define	dsWindow		(48+zlib1222add)
+#define	dsPrev			(56+zlib1222add)
+#define	dsMatchLen		(88+zlib1222add)
+#define	dsPrevMatch		(92+zlib1222add)
+#define	dsStrStart		(100+zlib1222add)
+#define	dsMatchStart		(104+zlib1222add)
+#define	dsLookahead		(108+zlib1222add)
+#define	dsPrevLen		(112+zlib1222add)
+#define	dsMaxChainLen		(116+zlib1222add)
+#define	dsGoodMatch		(132+zlib1222add)
+#define	dsNiceMatch		(136+zlib1222add)
 
 
 .file "match.S"
diff --git a/zlib/contrib/asm686/match.S b/zlib/contrib/asm686/match.S
index 8e86c33c288..5c3e9ee3671 100644
--- a/zlib/contrib/asm686/match.S
+++ b/zlib/contrib/asm686/match.S
@@ -38,26 +38,28 @@
 #define	deflatestate		56	/* the function arguments	*/
 #define	curmatch		60
 
-/* Offsets for fields in the deflate_state structure. These numbers
- * are calculated from the definition of deflate_state, with the
- * assumption that the compiler will dword-align the fields. (Thus,
- * changing the definition of deflate_state could easily cause this
- * program to crash horribly, without so much as a warning at
- * compile time. Sigh.)
+/* All the +zlib1222add offsets are due to the addition of fields
+ *  in zlib in the deflate_state structure since the asm code was first written
+ * (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+ * (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+ * if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
  */
-#define	dsWSize			36
-#define	dsWMask			44
-#define	dsWindow		48
-#define	dsPrev			56
-#define	dsMatchLen		88
-#define	dsPrevMatch		92
-#define	dsStrStart		100
-#define	dsMatchStart		104
-#define	dsLookahead		108
-#define	dsPrevLen		112
-#define	dsMaxChainLen		116
-#define	dsGoodMatch		132
-#define	dsNiceMatch		136
+
+#define zlib1222add		(8)
+
+#define	dsWSize			(36+zlib1222add)
+#define	dsWMask			(44+zlib1222add)
+#define	dsWindow		(48+zlib1222add)
+#define	dsPrev			(56+zlib1222add)
+#define	dsMatchLen		(88+zlib1222add)
+#define	dsPrevMatch		(92+zlib1222add)
+#define	dsStrStart		(100+zlib1222add)
+#define	dsMatchStart		(104+zlib1222add)
+#define	dsLookahead		(108+zlib1222add)
+#define	dsPrevLen		(112+zlib1222add)
+#define	dsMaxChainLen		(116+zlib1222add)
+#define	dsGoodMatch		(132+zlib1222add)
+#define	dsNiceMatch		(136+zlib1222add)
 
 
 .file "match.S"
diff --git a/zlib/contrib/gzappend/gzappend.c b/zlib/contrib/gzappend/gzappend.c
deleted file mode 100644
index f2e9e4ffd52..00000000000
--- a/zlib/contrib/gzappend/gzappend.c
+++ /dev/null
@@ -1,500 +0,0 @@
-/* gzappend -- command to append to a gzip file
-
-  Copyright (C) 2003 Mark Adler, all rights reserved
-  version 1.1, 4 Nov 2003
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the author be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Mark Adler    madler@alumni.caltech.edu
- */
-
-/*
- * Change history:
- *
- * 1.0  19 Oct 2003     - First version
- * 1.1   4 Nov 2003     - Expand and clarify some comments and notes
- *                      - Add version and copyright to help
- *                      - Send help to stdout instead of stderr
- *                      - Add some preemptive typecasts
- *                      - Add L to constants in lseek() calls
- *                      - Remove some debugging information in error messages
- *                      - Use new data_type definition for zlib 1.2.1
- *                      - Simplfy and unify file operations
- *                      - Finish off gzip file in gztack()
- *                      - Use deflatePrime() instead of adding empty blocks
- *                      - Keep gzip file clean on appended file read errors
- *                      - Use in-place rotate instead of auxiliary buffer
- *                        (Why you ask?  Because it was fun to write!)
- */
-
-/*
-   gzappend takes a gzip file and appends to it, compressing files from the
-   command line or data from stdin.  The gzip file is written to directly, to
-   avoid copying that file, in case it's large.  Note that this results in the
-   unfriendly behavior that if gzappend fails, the gzip file is corrupted.
-
-   This program was written to illustrate the use of the new Z_BLOCK option of
-   zlib 1.2.1's inflate() function.  This option returns from inflate() at each
-   block boundary to facilitate locating and modifying the last block bit at
-   the start of the final deflate block.  Also whether using Z_BLOCK or not,
-   another required feature of zlib 1.2.1 is that inflate() now provides the
-   number of unusued bits in the last input byte used.  gzappend will not work
-   with versions of zlib earlier than 1.2.1.
-
-   gzappend first decompresses the gzip file internally, discarding all but
-   the last 32K of uncompressed data, and noting the location of the last block
-   bit and the number of unused bits in the last byte of the compressed data.
-   The gzip trailer containing the CRC-32 and length of the uncompressed data
-   is verified.  This trailer will be later overwritten.
-
-   Then the last block bit is cleared by seeking back in the file and rewriting
-   the byte that contains it.  Seeking forward, the last byte of the compressed
-   data is saved along with the number of unused bits to initialize deflate.
-
-   A deflate process is initialized, using the last 32K of the uncompressed
-   data from the gzip file to initialize the dictionary.  If the total
-   uncompressed data was less than 32K, then all of it is used to initialize
-   the dictionary.  The deflate output bit buffer is also initialized with the
-   last bits from the original deflate stream.  From here on, the data to
-   append is simply compressed using deflate, and written to the gzip file.
-   When that is complete, the new CRC-32 and uncompressed length are written
-   as the trailer of the gzip file.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include "zlib.h"
-
-#define local static
-#define LGCHUNK 14
-#define CHUNK (1U << LGCHUNK)
-#define DSIZE 32768U
-
-/* print an error message and terminate with extreme prejudice */
-local void bye(char *msg1, char *msg2)
-{
-    fprintf(stderr, "gzappend error: %s%s\n", msg1, msg2);
-    exit(1);
-}
-
-/* return the greatest common divisor of a and b using Euclid's algorithm,
-   modified to be fast when one argument much greater than the other, and
-   coded to avoid unnecessary swapping */
-local unsigned gcd(unsigned a, unsigned b)
-{
-    unsigned c;
-
-    while (a && b)
-        if (a > b) {
-            c = b;
-            while (a - c >= c)
-                c <<= 1;
-            a -= c;
-        }
-        else {
-            c = a;
-            while (b - c >= c)
-                c <<= 1;
-            b -= c;
-        }
-    return a + b;
-}
-
-/* rotate list[0..len-1] left by rot positions, in place */
-local void rotate(unsigned char *list, unsigned len, unsigned rot)
-{
-    unsigned char tmp;
-    unsigned cycles;
-    unsigned char *start, *last, *to, *from;
-
-    /* normalize rot and handle degenerate cases */
-    if (len < 2) return;
-    if (rot >= len) rot %= len;
-    if (rot == 0) return;
-
-    /* pointer to last entry in list */
-    last = list + (len - 1);
-
-    /* do simple left shift by one */
-    if (rot == 1) {
-        tmp = *list;
-        memcpy(list, list + 1, len - 1);
-        *last = tmp;
-        return;
-    }
-
-    /* do simple right shift by one */
-    if (rot == len - 1) {
-        tmp = *last;
-        memmove(list + 1, list, len - 1);
-        *list = tmp;
-        return;
-    }
-
-    /* otherwise do rotate as a set of cycles in place */
-    cycles = gcd(len, rot);             /* number of cycles */
-    do {
-        start = from = list + cycles;   /* start index is arbitrary */
-        tmp = *from;                    /* save entry to be overwritten */
-        for (;;) {
-            to = from;                  /* next step in cycle */
-            from += rot;                /* go right rot positions */
-            if (from > last) from -= len;   /* (pointer better not wrap) */
-            if (from == start) break;   /* all but one shifted */
-            *to = *from;                /* shift left */
-        }
-        *to = tmp;                      /* complete the circle */
-    } while (--cycles);
-}
-
-/* structure for gzip file read operations */
-typedef struct {
-    int fd;                     /* file descriptor */
-    int size;                   /* 1 << size is bytes in buf */
-    unsigned left;              /* bytes available at next */
-    unsigned char *buf;         /* buffer */
-    unsigned char *next;        /* next byte in buffer */
-    char *name;                 /* file name for error messages */
-} file;
-
-/* reload buffer */
-local int readin(file *in)
-{
-    int len;
-
-    len = read(in->fd, in->buf, 1 << in->size);
-    if (len == -1) bye("error reading ", in->name);
-    in->left = (unsigned)len;
-    in->next = in->buf;
-    return len;
-}
-
-/* read from file in, exit if end-of-file */
-local int readmore(file *in)
-{
-    if (readin(in) == 0) bye("unexpected end of ", in->name);
-    return 0;
-}
-
-#define read1(in) (in->left == 0 ? readmore(in) : 0, \
-                   in->left--, *(in->next)++)
-
-/* skip over n bytes of in */
-local void skip(file *in, unsigned n)
-{
-    unsigned bypass;
-
-    if (n > in->left) {
-        n -= in->left;
-        bypass = n & ~((1U << in->size) - 1);
-        if (bypass) {
-            if (lseek(in->fd, (off_t)bypass, SEEK_CUR) == -1)
-                bye("seeking ", in->name);
-            n -= bypass;
-        }
-        readmore(in);
-        if (n > in->left)
-            bye("unexpected end of ", in->name);
-    }
-    in->left -= n;
-    in->next += n;
-}
-
-/* read a four-byte unsigned integer, little-endian, from in */
-unsigned long read4(file *in)
-{
-    unsigned long val;
-
-    val = read1(in);
-    val += (unsigned)read1(in) << 8;
-    val += (unsigned long)read1(in) << 16;
-    val += (unsigned long)read1(in) << 24;
-    return val;
-}
-
-/* skip over gzip header */
-local void gzheader(file *in)
-{
-    int flags;
-    unsigned n;
-
-    if (read1(in) != 31 || read1(in) != 139) bye(in->name, " not a gzip file");
-    if (read1(in) != 8) bye("unknown compression method in", in->name);
-    flags = read1(in);
-    if (flags & 0xe0) bye("unknown header flags set in", in->name);
-    skip(in, 6);
-    if (flags & 4) {
-        n = read1(in);
-        n += (unsigned)(read1(in)) << 8;
-        skip(in, n);
-    }
-    if (flags & 8) while (read1(in) != 0) ;
-    if (flags & 16) while (read1(in) != 0) ;
-    if (flags & 2) skip(in, 2);
-}
-
-/* decompress gzip file "name", return strm with a deflate stream ready to
-   continue compression of the data in the gzip file, and return a file
-   descriptor pointing to where to write the compressed data -- the deflate
-   stream is initialized to compress using level "level" */
-local int gzscan(char *name, z_stream *strm, int level)
-{
-    int ret, lastbit, left, full;
-    unsigned have;
-    unsigned long crc, tot;
-    unsigned char *window;
-    off_t lastoff, end;
-    file gz;
-
-    /* open gzip file */
-    gz.name = name;
-    gz.fd = open(name, O_RDWR, 0);
-    if (gz.fd == -1) bye("cannot open ", name);
-    gz.buf = malloc(CHUNK);
-    if (gz.buf == NULL) bye("out of memory", "");
-    gz.size = LGCHUNK;
-    gz.left = 0;
-
-    /* skip gzip header */
-    gzheader(&gz);
-
-    /* prepare to decompress */
-    window = malloc(DSIZE);
-    if (window == NULL) bye("out of memory", "");
-    strm->zalloc = Z_NULL;
-    strm->zfree = Z_NULL;
-    strm->opaque = Z_NULL;
-    ret = inflateInit2(strm, -15);
-    if (ret != Z_OK) bye("out of memory", " or library mismatch");
-
-    /* decompress the deflate stream, saving append information */
-    lastbit = 0;
-    lastoff = lseek(gz.fd, 0L, SEEK_CUR) - gz.left;
-    left = 0;
-    strm->avail_in = gz.left;
-    strm->next_in = gz.next;
-    crc = crc32(0L, Z_NULL, 0);
-    have = full = 0;
-    do {
-        /* if needed, get more input */
-        if (strm->avail_in == 0) {
-            readmore(&gz);
-            strm->avail_in = gz.left;
-            strm->next_in = gz.next;
-        }
-
-        /* set up output to next available section of sliding window */
-        strm->avail_out = DSIZE - have;
-        strm->next_out = window + have;
-
-        /* inflate and check for errors */
-        ret = inflate(strm, Z_BLOCK);
-        if (ret == Z_STREAM_ERROR) bye("internal stream error!", "");
-        if (ret == Z_MEM_ERROR) bye("out of memory", "");
-        if (ret == Z_DATA_ERROR)
-            bye("invalid compressed data--format violated in", name);
-
-        /* update crc and sliding window pointer */
-        crc = crc32(crc, window + have, DSIZE - have - strm->avail_out);
-        if (strm->avail_out)
-            have = DSIZE - strm->avail_out;
-        else {
-            have = 0;
-            full = 1;
-        }
-
-        /* process end of block */
-        if (strm->data_type & 128) {
-            if (strm->data_type & 64)
-                left = strm->data_type & 0x1f;
-            else {
-                lastbit = strm->data_type & 0x1f;
-                lastoff = lseek(gz.fd, 0L, SEEK_CUR) - strm->avail_in;
-            }
-        }
-    } while (ret != Z_STREAM_END);
-    inflateEnd(strm);
-    gz.left = strm->avail_in;
-    gz.next = strm->next_in;
-
-    /* save the location of the end of the compressed data */
-    end = lseek(gz.fd, 0L, SEEK_CUR) - gz.left;
-
-    /* check gzip trailer and save total for deflate */
-    if (crc != read4(&gz))
-        bye("invalid compressed data--crc mismatch in ", name);
-    tot = strm->total_out;
-    if ((tot & 0xffffffffUL) != read4(&gz))
-        bye("invalid compressed data--length mismatch in", name);
-
-    /* if not at end of file, warn */
-    if (gz.left || readin(&gz))
-        fprintf(stderr,
-            "gzappend warning: junk at end of gzip file overwritten\n");
-
-    /* clear last block bit */
-    lseek(gz.fd, lastoff - (lastbit != 0), SEEK_SET);
-    if (read(gz.fd, gz.buf, 1) != 1) bye("reading after seek on ", name);
-    *gz.buf = (unsigned char)(*gz.buf ^ (1 << ((8 - lastbit) & 7)));
-    lseek(gz.fd, -1L, SEEK_CUR);
-    if (write(gz.fd, gz.buf, 1) != 1) bye("writing after seek to ", name);
-
-    /* if window wrapped, build dictionary from window by rotating */
-    if (full) {
-        rotate(window, DSIZE, have);
-        have = DSIZE;
-    }
-
-    /* set up deflate stream with window, crc, total_in, and leftover bits */
-    ret = deflateInit2(strm, level, Z_DEFLATED, -15, 8, Z_DEFAULT_STRATEGY);
-    if (ret != Z_OK) bye("out of memory", "");
-    deflateSetDictionary(strm, window, have);
-    strm->adler = crc;
-    strm->total_in = tot;
-    if (left) {
-        lseek(gz.fd, --end, SEEK_SET);
-        if (read(gz.fd, gz.buf, 1) != 1) bye("reading after seek on ", name);
-        deflatePrime(strm, 8 - left, *gz.buf);
-    }
-    lseek(gz.fd, end, SEEK_SET);
-
-    /* clean up and return */
-    free(window);
-    free(gz.buf);
-    return gz.fd;
-}
-
-/* append file "name" to gzip file gd using deflate stream strm -- if last
-   is true, then finish off the deflate stream at the end */
-local void gztack(char *name, int gd, z_stream *strm, int last)
-{
-    int fd, len, ret;
-    unsigned left;
-    unsigned char *in, *out;
-
-    /* open file to compress and append */
-    fd = 0;
-    if (name != NULL) {
-        fd = open(name, O_RDONLY, 0);
-        if (fd == -1)
-            fprintf(stderr, "gzappend warning: %s not found, skipping ...\n",
-                    name);
-    }
-
-    /* allocate buffers */
-    in = fd == -1 ? NULL : malloc(CHUNK);
-    out = malloc(CHUNK);
-    if (out == NULL) bye("out of memory", "");
-
-    /* compress input file and append to gzip file */
-    do {
-        /* get more input */
-        len = fd == -1 ? 0 : read(fd, in, CHUNK);
-        if (len == -1) {
-            fprintf(stderr,
-                    "gzappend warning: error reading %s, skipping rest ...\n",
-                    name);
-            len = 0;
-        }
-        strm->avail_in = (unsigned)len;
-        strm->next_in = in;
-        if (len) strm->adler = crc32(strm->adler, in, (unsigned)len);
-
-        /* compress and write all available output */
-        do {
-            strm->avail_out = CHUNK;
-            strm->next_out = out;
-            ret = deflate(strm, last && len == 0 ? Z_FINISH : Z_NO_FLUSH);
-            left = CHUNK - strm->avail_out;
-            while (left) {
-                len = write(gd, out + CHUNK - strm->avail_out - left, left);
-                if (len == -1) bye("writing gzip file", "");
-                left -= (unsigned)len;
-            }
-        } while (strm->avail_out == 0 && ret != Z_STREAM_END);
-    } while (len != 0);
-
-    /* write trailer after last entry */
-    if (last) {
-        deflateEnd(strm);
-        out[0] = (unsigned char)(strm->adler);
-        out[1] = (unsigned char)(strm->adler >> 8);
-        out[2] = (unsigned char)(strm->adler >> 16);
-        out[3] = (unsigned char)(strm->adler >> 24);
-        out[4] = (unsigned char)(strm->total_in);
-        out[5] = (unsigned char)(strm->total_in >> 8);
-        out[6] = (unsigned char)(strm->total_in >> 16);
-        out[7] = (unsigned char)(strm->total_in >> 24);
-        len = 8;
-        do {
-            ret = write(gd, out + 8 - len, len);
-            if (ret == -1) bye("writing gzip file", "");
-            len -= ret;
-        } while (len);
-        close(gd);
-    }
-
-    /* clean up and return */
-    free(out);
-    if (in != NULL) free(in);
-    if (fd > 0) close(fd);
-}
-
-/* process the compression level option if present, scan the gzip file, and
-   append the specified files, or append the data from stdin if no other file
-   names are provided on the command line -- the gzip file must be writable
-   and seekable */
-int main(int argc, char **argv)
-{
-    int gd, level;
-    z_stream strm;
-
-    /* ignore command name */
-    argv++;
-
-    /* provide usage if no arguments */
-    if (*argv == NULL) {
-        printf("gzappend 1.1 (4 Nov 2003) Copyright (C) 2003 Mark Adler\n");
-        printf(
-            "usage: gzappend [-level] file.gz [ addthis [ andthis ... ]]\n");
-        return 0;
-    }
-
-    /* set compression level */
-    level = Z_DEFAULT_COMPRESSION;
-    if (argv[0][0] == '-') {
-        if (argv[0][1] < '0' || argv[0][1] > '9' || argv[0][2] != 0)
-            bye("invalid compression level", "");
-        level = argv[0][1] - '0';
-        if (*++argv == NULL) bye("no gzip file name after options", "");
-    }
-
-    /* prepare to append to gzip file */
-    gd = gzscan(*argv++, &strm, level);
-
-    /* append files on command line, or from stdin if none */
-    if (*argv == NULL)
-        gztack(NULL, gd, &strm, 1);
-    else
-        do {
-            gztack(*argv, gd, &strm, argv[1] == NULL);
-        } while (*++argv != NULL);
-    return 0;
-}
diff --git a/zlib/contrib/minizip/ChangeLogUnzip b/zlib/contrib/minizip/ChangeLogUnzip
index d7d4b6ba584..50ca6a9e0f3 100644
--- a/zlib/contrib/minizip/ChangeLogUnzip
+++ b/zlib/contrib/minizip/ChangeLogUnzip
@@ -1,3 +1,15 @@
+Change in 1.01e (12 feb 05)
+- Fix in zipOpen2 for globalcomment (Rolf Kalbermatter)
+- Fix possible memory leak in unzip.c (Zoran Stevanovic)
+
+Change in 1.01b (20 may 04)
+- Integrate patch from Debian package (submited by Mark Brown)
+- Add tools mztools from Xavier Roche
+
+Change in 1.01 (8 may 04)
+- fix buffer overrun risk in unzip.c (Xavier Roche)
+- fix a minor buffer insecurity in minizip.c (Mike Whittaker)
+
 Change in 1.00: (10 sept 03)
 - rename to 1.00
 - cosmetic code change
diff --git a/zlib/contrib/minizip/miniunz.c b/zlib/contrib/minizip/miniunz.c
index c8cf81e3be3..f599938884e 100644
--- a/zlib/contrib/minizip/miniunz.c
+++ b/zlib/contrib/minizip/miniunz.c
@@ -1,3 +1,11 @@
+/*
+   miniunz.c
+   Version 1.01e, February 12th, 2005
+
+   Copyright (C) 1998-2005 Gilles Vollant
+*/
+
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -27,7 +35,7 @@
   mini unzip, demo of unzip package
 
   usage :
-  Usage : miniunz [-exvlo] file.zip [file_to_extract]
+  Usage : miniunz [-exvlo] file.zip [file_to_extract] [-d extractdir]
 
   list the file in the zipfile, and print the content of FILE_ID.ZIP or README.TXT
     if it exists
@@ -140,17 +148,18 @@ int makedir (newdir)
 
 void do_banner()
 {
-    printf("MiniUnz 1.00, demo of zLib + Unz package written by Gilles Vollant\n");
+    printf("MiniUnz 1.01b, demo of zLib + Unz package written by Gilles Vollant\n");
     printf("more info at http://www.winimage.com/zLibDll/unzip.html\n\n");
 }
 
 void do_help()
 {
-    printf("Usage : miniunz [-e] [-x] [-v] [-l] [-o] [-p password] file.zip [file_to_extr.]\n\n" \
+    printf("Usage : miniunz [-e] [-x] [-v] [-l] [-o] [-p password] file.zip [file_to_extr.] [-d extractdir]\n\n" \
            "  -e  Extract without pathname (junk paths)\n" \
            "  -x  Extract with pathname\n" \
            "  -v  list files\n" \
            "  -l  list files\n" \
+           "  -d  directory to extract into\n" \
            "  -o  overwrite files without prompting\n" \
            "  -p  extract crypted file using password\n\n");
 }
@@ -304,8 +313,14 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
                 do
                 {
                     char answer[128];
-                    printf("The file %s exist. Overwrite ? [y]es, [n]o, [A]ll: ",write_filename);
-                    scanf("%1s",answer);
+                    int ret;
+
+                    printf("The file %s exists. Overwrite ? [y]es, [n]o, [A]ll: ",write_filename);
+                    ret = scanf("%1s",answer);
+                    if (ret != 1) 
+                    {
+                       exit(EXIT_FAILURE);
+                    }
                     rep = answer[0] ;
                     if ((rep>='a') && (rep<='z'))
                         rep -= 0x20;
@@ -459,6 +474,8 @@ int main(argc,argv)
     int opt_do_extract=1;
     int opt_do_extract_withoutpath=0;
     int opt_overwrite=0;
+    int opt_extractdir=0;
+    const char *dirname=NULL;
     unzFile uf=NULL;
 
     do_banner();
@@ -488,6 +505,12 @@ int main(argc,argv)
                         opt_do_extract = opt_do_extract_withoutpath = 1;
                     if ((c=='o') || (c=='O'))
                         opt_overwrite=1;
+                    if ((c=='d') || (c=='D'))
+                    {
+                        opt_extractdir=1;
+                        dirname=argv[i+1];
+                    }
+
                     if (((c=='p') || (c=='P')) && (i+1<argc))
                     {
                         password=argv[i+1];
@@ -499,7 +522,7 @@ int main(argc,argv)
             {
                 if (zipfilename == NULL)
                     zipfilename = argv[i];
-                else if (filename_to_extract==NULL)
+                else if ((filename_to_extract==NULL) && (!opt_extractdir))
                         filename_to_extract = argv[i] ;
             }
         }
@@ -544,6 +567,12 @@ int main(argc,argv)
         return do_list(uf);
     else if (opt_do_extract==1)
     {
+        if (opt_extractdir && chdir(dirname)) 
+        {
+          printf("Error changing into %s, aborting\n", dirname);
+          exit(-1);
+        }
+
         if (filename_to_extract == NULL)
             return do_extract(uf,opt_do_extract_withoutpath,opt_overwrite,password);
         else
diff --git a/zlib/contrib/minizip/minizip.c b/zlib/contrib/minizip/minizip.c
index 5746f5cff8d..f2dfecd8b12 100644
--- a/zlib/contrib/minizip/minizip.c
+++ b/zlib/contrib/minizip/minizip.c
@@ -1,3 +1,10 @@
+/*
+   minizip.c
+   Version 1.01e, February 12th, 2005
+
+   Copyright (C) 1998-2005 Gilles Vollant
+*/
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -53,8 +60,8 @@ uLong filetime(f, tmzip, dt)
 #else
 #ifdef unix
 uLong filetime(f, tmzip, dt)
-    char *f;                /* name of file to get info on */
-    tm_zip *tmzip;             /* return value: access, modific. and creation times */
+    char *f;               /* name of file to get info on */
+    tm_zip *tmzip;         /* return value: access, modific. and creation times */
     uLong *dt;             /* dostime */
 {
   int ret=0;
@@ -66,6 +73,8 @@ uLong filetime(f, tmzip, dt)
   {
     char name[MAXFILENAME+1];
     int len = strlen(f);
+    if (len > MAXFILENAME)
+      len = MAXFILENAME;
 
     strncpy(name, f,MAXFILENAME-1);
     /* strncpy doesnt append the trailing NULL, of the string is too long. */
@@ -120,7 +129,7 @@ int check_exist_file(filename)
 
 void do_banner()
 {
-    printf("MiniZip 1.00, demo of zLib + Zip package written by Gilles Vollant\n");
+    printf("MiniZip 1.01b, demo of zLib + Zip package written by Gilles Vollant\n");
     printf("more info at http://www.winimage.com/zLibDll/unzip.html\n\n");
 }
 
@@ -269,8 +278,13 @@ int main(argc,argv)
                 do
                 {
                     char answer[128];
-                    printf("The file %s exist. Overwrite ? [y]es, [n]o, [a]ppend : ",filename_try);
-                    scanf("%1s",answer);
+                    int ret;
+                    printf("The file %s exists. Overwrite ? [y]es, [n]o, [a]ppend : ",filename_try);
+                    ret = scanf("%1s",answer);
+                    if (ret != 1)
+                    {
+                       exit(EXIT_FAILURE);
+                    }
                     rep = answer[0] ;
                     if ((rep>='a') && (rep<='z'))
                         rep -= 0x20;
@@ -305,7 +319,12 @@ int main(argc,argv)
 
         for (i=zipfilenamearg+1;(i<argc) && (err==ZIP_OK);i++)
         {
-            if (((*(argv[i]))!='-') && ((*(argv[i]))!='/'))
+            if (!((((*(argv[i]))=='-') || ((*(argv[i]))=='/')) &&
+                  ((argv[i][1]=='o') || (argv[i][1]=='O') ||
+                   (argv[i][1]=='a') || (argv[i][1]=='A') ||
+                   (argv[i][1]=='p') || (argv[i][1]=='P') ||
+                   ((argv[i][1]>='0') || (argv[i][1]<='9'))) &&
+                  (strlen(argv[i]) == 2)))
             {
                 FILE * fin;
                 int size_read;
@@ -390,7 +409,11 @@ int main(argc,argv)
         errclose = zipClose(zf,NULL);
         if (errclose != ZIP_OK)
             printf("error in closing %s\n",filename_try);
-   }
+    }
+    else
+    {
+       do_help();
+    }
 
     free(buf);
     return 0;
diff --git a/zlib/contrib/minizip/unzip.c b/zlib/contrib/minizip/unzip.c
index f08f624f00f..9ad4766d8db 100644
--- a/zlib/contrib/minizip/unzip.c
+++ b/zlib/contrib/minizip/unzip.c
@@ -1,7 +1,7 @@
 /* unzip.c -- IO for uncompress .zip files using zlib
-   Version 1.00, September 10th, 2003
+   Version 1.01e, February 12th, 2005
 
-   Copyright (C) 1998-2003 Gilles Vollant
+   Copyright (C) 1998-2005 Gilles Vollant
 
    Read unzip.h for more info
 */
@@ -88,7 +88,7 @@ woven in by Terry Thorsen 1/2003.
 
 
 const char unz_copyright[] =
-   " unzip 1.00 Copyright 1998-2003 Gilles Vollant - http://www.winimage.com/zLibDll";
+   " unzip 1.01 Copyright 1998-2004 Gilles Vollant - http://www.winimage.com/zLibDll";
 
 /* unz_file_info_interntal contain internal info about a file in zipfile*/
 typedef struct unz_file_info_internal_s
@@ -798,7 +798,8 @@ extern int ZEXPORT unzGoToNextFile (file)
     s=(unz_s*)file;
     if (!s->current_file_ok)
         return UNZ_END_OF_LIST_OF_FILE;
-    if (s->num_file+1==s->gi.number_entry)
+    if (s->gi.number_entry != 0xffff)    /* 2^16 files overflow hack */
+      if (s->num_file+1==s->gi.number_entry)
         return UNZ_END_OF_LIST_OF_FILE;
 
     s->pos_in_central_dir += SIZECENTRALDIRITEM + s->cur_file_info.size_filename +
@@ -1136,7 +1137,10 @@ extern int ZEXPORT unzOpenCurrentFile3 (file, method, level, raw, password)
       if (err == Z_OK)
         pfile_in_zip_read_info->stream_initialised=1;
       else
+      {
+        TRYFREE(pfile_in_zip_read_info);
         return err;
+      }
         /* windowBits is passed < 0 to tell that there is no zlib header.
          * Note that in this case inflate *requires* an extra "dummy" byte
          * after the compressed stream in order to complete decompression and
@@ -1244,9 +1248,17 @@ extern int ZEXPORT unzReadCurrentFile  (file, buf, len)
 
     pfile_in_zip_read_info->stream.avail_out = (uInt)len;
 
-    if (len>pfile_in_zip_read_info->rest_read_uncompressed)
+    if ((len>pfile_in_zip_read_info->rest_read_uncompressed) &&
+        (!(pfile_in_zip_read_info->raw)))
+        pfile_in_zip_read_info->stream.avail_out =
+            (uInt)pfile_in_zip_read_info->rest_read_uncompressed;
+
+    if ((len>pfile_in_zip_read_info->rest_read_compressed+
+           pfile_in_zip_read_info->stream.avail_in) &&
+         (pfile_in_zip_read_info->raw))
         pfile_in_zip_read_info->stream.avail_out =
-          (uInt)pfile_in_zip_read_info->rest_read_uncompressed;
+            (uInt)pfile_in_zip_read_info->rest_read_compressed+
+            pfile_in_zip_read_info->stream.avail_in;
 
     while (pfile_in_zip_read_info->stream.avail_out>0)
     {
@@ -1339,6 +1351,9 @@ extern int ZEXPORT unzReadCurrentFile  (file, buf, len)
             */
             err=inflate(&pfile_in_zip_read_info->stream,flush);
 
+            if ((err>=0) && (pfile_in_zip_read_info->stream.msg!=NULL))
+              err = Z_DATA_ERROR;
+
             uTotalOutAfter = pfile_in_zip_read_info->stream.total_out;
             uOutThis = uTotalOutAfter-uTotalOutBefore;
 
@@ -1461,7 +1476,7 @@ extern int ZEXPORT unzGetLocalExtrafield (file,buf,len)
 
     if (ZREAD(pfile_in_zip_read_info->z_filefunc,
               pfile_in_zip_read_info->filestream,
-              buf,size_to_read)!=size_to_read)
+              buf,read_now)!=read_now)
         return UNZ_ERRNO;
 
     return (int)read_now;
@@ -1544,3 +1559,40 @@ extern int ZEXPORT unzGetGlobalComment (file, szComment, uSizeBuf)
         *(szComment+s->gi.size_comment)='\0';
     return (int)uReadThis;
 }
+
+/* Additions by RX '2004 */
+extern uLong ZEXPORT unzGetOffset (file)
+    unzFile file;
+{
+    unz_s* s;
+
+    if (file==NULL)
+          return UNZ_PARAMERROR;
+    s=(unz_s*)file;
+    if (!s->current_file_ok)
+      return 0;
+    if (s->gi.number_entry != 0 && s->gi.number_entry != 0xffff)
+      if (s->num_file==s->gi.number_entry)
+         return 0;
+    return s->pos_in_central_dir;
+}
+
+extern int ZEXPORT unzSetOffset (file, pos)
+        unzFile file;
+        uLong pos;
+{
+    unz_s* s;
+    int err;
+
+    if (file==NULL)
+        return UNZ_PARAMERROR;
+    s=(unz_s*)file;
+
+    s->pos_in_central_dir = pos;
+    s->num_file = s->gi.number_entry;      /* hack */
+    err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info,
+                                              &s->cur_file_info_internal,
+                                              NULL,0,NULL,0,NULL,0);
+    s->current_file_ok = (err == UNZ_OK);
+    return err;
+}
diff --git a/zlib/contrib/minizip/unzip.h b/zlib/contrib/minizip/unzip.h
index 4e50979d8ea..b247937c807 100644
--- a/zlib/contrib/minizip/unzip.h
+++ b/zlib/contrib/minizip/unzip.h
@@ -1,11 +1,13 @@
 /* unzip.h -- IO for uncompress .zip files using zlib
-   Version 1.00, September 10th, 2003
+   Version 1.01e, February 12th, 2005
 
-   Copyright (C) 1998-2003 Gilles Vollant
+   Copyright (C) 1998-2005 Gilles Vollant
 
    This unzip package allow extract file from .ZIP file, compatible with PKZip 2.04g
      WinZip, InfoZip tools and compatible.
-   Encryption and multi volume ZipFile (span) are not supported.
+
+   Multi volume ZipFile (span) are not supported.
+   Encryption compatible with pkzip 2.04g only supported
    Old compressions used by old PKZip 1.x are not supported
 
 
@@ -335,6 +337,16 @@ extern int ZEXPORT unzGetLocalExtrafield OF((unzFile file,
     the error code
 */
 
+/***************************************************************************/
+
+/* Get the current file offset */
+extern uLong ZEXPORT unzGetOffset (unzFile file);
+
+/* Set the current file offset */
+extern int ZEXPORT unzSetOffset (unzFile file, uLong pos);
+
+
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/zlib/contrib/minizip/zip.c b/zlib/contrib/minizip/zip.c
index 1a713e50842..7fbe0027437 100644
--- a/zlib/contrib/minizip/zip.c
+++ b/zlib/contrib/minizip/zip.c
@@ -1,7 +1,10 @@
 /* zip.c -- IO on .zip files using zlib
-   Version 1.00, September 10th, 2003
+   Version 1.01e, February 12th, 2005
 
-   Copyright (C) 1998-2003 Gilles Vollant
+   27 Dec 2004 Rolf Kalbermatter
+   Modification to zipOpen2 to support globalComment retrieval.
+
+   Copyright (C) 1998-2005 Gilles Vollant
 
    Read zip.h for more info
 */
@@ -77,7 +80,7 @@
 #endif
 #endif
 const char zip_copyright[] =
-   " zip 1.00 Copyright 1998-2003 Gilles Vollant - http://www.winimage.com/zLibDll";
+   " zip 1.01 Copyright 1998-2004 Gilles Vollant - http://www.winimage.com/zLibDll";
 
 
 #define SIZEDATA_INDATABLOCK (4096-(4*4))
@@ -143,6 +146,9 @@ typedef struct
     uLong begin_pos;            /* position of the beginning of the zipfile */
     uLong add_position_when_writting_offset;
     uLong number_entry;
+#ifndef NO_ADDFILEINEXISTINGZIP
+    char *globalcomment;
+#endif
 } zip_internal;
 
 
@@ -265,10 +271,19 @@ local int ziplocal_putValue (pzlib_filefunc_def, filestream, x, nbByte)
 {
     unsigned char buf[4];
     int n;
-    for (n = 0; n < nbByte; n++) {
+    for (n = 0; n < nbByte; n++)
+    {
         buf[n] = (unsigned char)(x & 0xff);
         x >>= 8;
     }
+    if (x != 0)
+      {     /* data overflow - hack for ZIP64 (X Roche) */
+      for (n = 0; n < nbByte; n++)
+        {
+          buf[n] = 0xff;
+        }
+      }
+
     if (ZWRITE(*pzlib_filefunc_def,filestream,buf,nbByte)!=(uLong)nbByte)
         return ZIP_ERRNO;
     else
@@ -287,7 +302,16 @@ local void ziplocal_putValue_inmemory (dest, x, nbByte)
         buf[n] = (unsigned char)(x & 0xff);
         x >>= 8;
     }
+
+    if (x != 0)
+    {     /* data overflow - hack for ZIP64 */
+       for (n = 0; n < nbByte; n++)
+       {
+          buf[n] = 0xff;
+       }
+    }
 }
+
 /****************************************************************************/
 
 
@@ -514,6 +538,7 @@ extern zipFile ZEXPORT zipOpen2 (pathname, append, globalcomment, pzlib_filefunc
 
     /* now we add file in a zipfile */
 #    ifndef NO_ADDFILEINEXISTINGZIP
+    ziinit.globalcomment = NULL;
     if (append == APPEND_STATUS_ADDINZIP)
     {
         uLong byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/
@@ -574,7 +599,7 @@ extern zipFile ZEXPORT zipOpen2 (pathname, append, globalcomment, pzlib_filefunc
         if (ziplocal_getLong(&ziinit.z_filefunc, ziinit.filestream,&offset_central_dir)!=ZIP_OK)
             err=ZIP_ERRNO;
 
-        /* zipfile comment length */
+        /* zipfile global comment length */
         if (ziplocal_getShort(&ziinit.z_filefunc, ziinit.filestream,&size_comment)!=ZIP_OK)
             err=ZIP_ERRNO;
 
@@ -588,9 +613,19 @@ extern zipFile ZEXPORT zipOpen2 (pathname, append, globalcomment, pzlib_filefunc
             return NULL;
         }
 
+        if (size_comment>0)
+        {
+            ziinit.globalcomment = ALLOC(size_comment+1);
+            if (ziinit.globalcomment)
+            {
+               size_comment = ZREAD(ziinit.z_filefunc, ziinit.filestream,ziinit.globalcomment,size_comment);
+               ziinit.globalcomment[size_comment]=0;
+            }
+        }
+
         byte_before_the_zipfile = central_pos -
                                 (offset_central_dir+size_central_dir);
-        ziinit.add_position_when_writting_offset = byte_before_the_zipfile ;
+        ziinit.add_position_when_writting_offset = byte_before_the_zipfile;
 
         {
             uLong size_central_dir_to_read = size_central_dir;
@@ -623,10 +658,18 @@ extern zipFile ZEXPORT zipOpen2 (pathname, append, globalcomment, pzlib_filefunc
                   offset_central_dir+byte_before_the_zipfile,ZLIB_FILEFUNC_SEEK_SET)!=0)
             err=ZIP_ERRNO;
     }
+
+    if (globalcomment)
+    {
+      *globalcomment = ziinit.globalcomment;
+    }
 #    endif /* !NO_ADDFILEINEXISTINGZIP*/
 
     if (err != ZIP_OK)
     {
+#    ifndef NO_ADDFILEINEXISTINGZIP
+        TRYFREE(ziinit.globalcomment);
+#    endif /* !NO_ADDFILEINEXISTINGZIP*/
         TRYFREE(zi);
         return NULL;
     }
@@ -699,9 +742,9 @@ extern int ZEXPORT zipOpenNewFileInZip3 (file, filename, zipfi,
     if (comment==NULL)
         size_comment = 0;
     else
-        size_comment = strlen(comment);
+        size_comment = (uInt)strlen(comment);
 
-    size_filename = strlen(filename);
+    size_filename = (uInt)strlen(filename);
 
     if (zipfi == NULL)
         zi->ci.dosDate = 0;
@@ -1094,7 +1137,7 @@ extern int ZEXPORT zipClose (file, global_comment)
     zip_internal* zi;
     int err = 0;
     uLong size_centraldir = 0;
-    uLong centraldir_pos_inzip ;
+    uLong centraldir_pos_inzip;
     uInt size_global_comment;
     if (file == NULL)
         return ZIP_PARAMERROR;
@@ -1105,11 +1148,14 @@ extern int ZEXPORT zipClose (file, global_comment)
         err = zipCloseFileInZip (file);
     }
 
+#ifndef NO_ADDFILEINEXISTINGZIP
+    if (global_comment==NULL)
+        global_comment = zi->globalcomment;
+#endif
     if (global_comment==NULL)
         size_global_comment = 0;
     else
-        size_global_comment = strlen(global_comment);
-
+        size_global_comment = (uInt)strlen(global_comment);
 
     centraldir_pos_inzip = ZTELL(zi->z_filefunc,zi->filestream);
     if (err==ZIP_OK)
@@ -1164,6 +1210,9 @@ extern int ZEXPORT zipClose (file, global_comment)
         if (err == ZIP_OK)
             err = ZIP_ERRNO;
 
+#ifndef NO_ADDFILEINEXISTINGZIP
+    TRYFREE(zi->globalcomment);
+#endif
     TRYFREE(zi);
 
     return err;
diff --git a/zlib/contrib/minizip/zip.h b/zlib/contrib/minizip/zip.h
index c37ea21872c..acacce83b9b 100644
--- a/zlib/contrib/minizip/zip.h
+++ b/zlib/contrib/minizip/zip.h
@@ -1,11 +1,12 @@
 /* zip.h -- IO for compress .zip files using zlib
-   Version 1.00, September 10th, 2003
+   Version 1.01e, February 12th, 2005
 
-   Copyright (C) 1998-2003 Gilles Vollant
+   Copyright (C) 1998-2005 Gilles Vollant
 
    This unzip package allow creates .ZIP file, compatible with PKZip 2.04g
      WinZip, InfoZip tools and compatible.
-   Encryption and multi volume ZipFile (span) are not supported.
+   Multi volume ZipFile (span) are not supported.
+   Encryption compatible with pkzip 2.04g only supported
    Old compressions used by old PKZip 1.x are not supported
 
   For uncompress .zip file, look at unzip.h
@@ -212,7 +213,6 @@ extern int ZEXPORT zipCloseFileInZip OF((zipFile file));
   Close the current file in the zipfile
 */
 
-
 extern int ZEXPORT zipCloseFileInZipRaw OF((zipFile file,
                                             uLong uncompressed_size,
                                             uLong crc32));
diff --git a/zlib/contrib/testzlib/testzlib.sln b/zlib/contrib/testzlib/testzlib.sln
deleted file mode 100644
index 86da7163d16..00000000000
--- a/zlib/contrib/testzlib/testzlib.sln
+++ /dev/null
@@ -1,21 +0,0 @@
-Microsoft Visual Studio Solution File, Format Version 7.00

-Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlib", "testzlib.vcproj", "{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}"

-EndProject

-Global

-	GlobalSection(SolutionConfiguration) = preSolution

-		ConfigName.0 = Debug

-		ConfigName.1 = Release

-	EndGlobalSection

-	GlobalSection(ProjectDependencies) = postSolution

-	EndGlobalSection

-	GlobalSection(ProjectConfiguration) = postSolution

-		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug.ActiveCfg = Debug|Win32

-		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug.Build.0 = Debug|Win32

-		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release.ActiveCfg = Release|Win32

-		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release.Build.0 = Release|Win32

-	EndGlobalSection

-	GlobalSection(ExtensibilityGlobals) = postSolution

-	EndGlobalSection

-	GlobalSection(ExtensibilityAddIns) = postSolution

-	EndGlobalSection

-EndGlobal

diff --git a/zlib/contrib/testzlib/testzlib.vcproj b/zlib/contrib/testzlib/testzlib.vcproj
deleted file mode 100644
index bd9b39bb9d7..00000000000
--- a/zlib/contrib/testzlib/testzlib.vcproj
+++ /dev/null
@@ -1,124 +0,0 @@
-<?xml version="1.0" encoding = "Windows-1252"?>

-<VisualStudioProject

-	ProjectType="Visual C++"

-	Version="7.00"

-	Name="testzlib"

-	ProjectGUID="{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}"

-	Keyword="Win32Proj">

-	<Platforms>

-		<Platform

-			Name="Win32"/>

-	</Platforms>

-	<Configurations>

-		<Configuration

-			Name="Debug|Win32"

-			OutputDirectory="Debug"

-			IntermediateDirectory="Debug"

-			ConfigurationType="1"

-			CharacterSet="2">

-			<Tool

-				Name="VCCLCompilerTool"

-				Optimization="0"

-				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE"

-				MinimalRebuild="TRUE"

-				BasicRuntimeChecks="3"

-				RuntimeLibrary="5"

-				UsePrecompiledHeader="0"

-				WarningLevel="3"

-				Detect64BitPortabilityProblems="TRUE"

-				DebugInformationFormat="4"/>

-			<Tool

-				Name="VCCustomBuildTool"/>

-			<Tool

-				Name="VCLinkerTool"

-				OutputFile="$(OutDir)/testzlib.exe"

-				LinkIncremental="2"

-				GenerateDebugInformation="TRUE"

-				ProgramDatabaseFile="$(OutDir)/testzlib.pdb"

-				SubSystem="1"

-				TargetMachine="1"/>

-			<Tool

-				Name="VCMIDLTool"/>

-			<Tool

-				Name="VCPostBuildEventTool"/>

-			<Tool

-				Name="VCPreBuildEventTool"/>

-			<Tool

-				Name="VCPreLinkEventTool"/>

-			<Tool

-				Name="VCResourceCompilerTool"/>

-			<Tool

-				Name="VCWebServiceProxyGeneratorTool"/>

-			<Tool

-				Name="VCWebDeploymentTool"/>

-		</Configuration>

-		<Configuration

-			Name="Release|Win32"

-			OutputDirectory="Release"

-			IntermediateDirectory="Release"

-			ConfigurationType="1"

-			CharacterSet="2">

-			<Tool

-				Name="VCCLCompilerTool"

-				Optimization="2"

-				InlineFunctionExpansion="1"

-				OmitFramePointers="TRUE"

-				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE"

-				StringPooling="TRUE"

-				RuntimeLibrary="4"

-				EnableFunctionLevelLinking="TRUE"

-				UsePrecompiledHeader="0"

-				WarningLevel="3"

-				Detect64BitPortabilityProblems="TRUE"

-				DebugInformationFormat="3"/>

-			<Tool

-				Name="VCCustomBuildTool"/>

-			<Tool

-				Name="VCLinkerTool"

-				OutputFile="$(OutDir)/testzlib.exe"

-				LinkIncremental="1"

-				GenerateDebugInformation="TRUE"

-				SubSystem="1"

-				OptimizeReferences="2"

-				EnableCOMDATFolding="2"

-				OptimizeForWindows98="1"

-				TargetMachine="1"/>

-			<Tool

-				Name="VCMIDLTool"/>

-			<Tool

-				Name="VCPostBuildEventTool"/>

-			<Tool

-				Name="VCPreBuildEventTool"/>

-			<Tool

-				Name="VCPreLinkEventTool"/>

-			<Tool

-				Name="VCResourceCompilerTool"/>

-			<Tool

-				Name="VCWebServiceProxyGeneratorTool"/>

-			<Tool

-				Name="VCWebDeploymentTool"/>

-		</Configuration>

-	</Configurations>

-	<Files>

-		<Filter

-			Name="Source Files"

-			Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm">

-			<File

-				RelativePath="testzlib.c">

-			</File>

-		</Filter>

-		<Filter

-			Name="Header Files"

-			Filter="h;hpp;hxx;hm;inl;inc">

-		</Filter>

-		<Filter

-			Name="Resource Files"

-			Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe">

-		</Filter>

-		<File

-			RelativePath="zlibwapi.lib">

-		</File>

-	</Files>

-	<Globals>

-	</Globals>

-</VisualStudioProject>

diff --git a/zlib/contrib/untgz/untgz.c b/zlib/contrib/untgz/untgz.c
index d748b6905bb..2c391e59867 100644
--- a/zlib/contrib/untgz/untgz.c
+++ b/zlib/contrib/untgz/untgz.c
@@ -1,7 +1,7 @@
 /*
  * untgz.c -- Display contents and extract files from a gzip'd TAR file
  *
- * written by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+ * written by Pedro A. Aranda Gutierrez <paag@tid.es>
  * adaptation to Unix by Jean-loup Gailly <jloup@gzip.org>
  * various fixes by Cosmin Truta <cosmint@cs.ubbcluj.ro>
  */
@@ -15,10 +15,10 @@
 #include "zlib.h"
 
 #ifdef unix
-# include <unistd.h>
+#  include <unistd.h>
 #else
-# include <direct.h>
-# include <io.h>
+#  include <direct.h>
+#  include <io.h>
 #endif
 
 #ifdef WIN32
@@ -28,8 +28,9 @@
 #  endif
 #  define mkdir(dirname,mode)   _mkdir(dirname)
 #  ifdef _MSC_VER
-#    define strdup(str)         _strdup(str)
 #    define access(path,mode)   _access(path,mode)
+#    define chmod(path,mode)    _chmod(path,mode)
+#    define strdup(str)         _strdup(str)
 #  endif
 #else
 #  include <utime.h>
@@ -48,7 +49,21 @@
 #define FIFOTYPE '6'            /* FIFO special */
 #define CONTTYPE '7'            /* reserved */
 
-#define BLOCKSIZE 512
+/* GNU tar extensions */
+
+#define GNUTYPE_DUMPDIR  'D'    /* file names from dumped directory */
+#define GNUTYPE_LONGLINK 'K'    /* long link name */
+#define GNUTYPE_LONGNAME 'L'    /* long file name */
+#define GNUTYPE_MULTIVOL 'M'    /* continuation of file from another volume */
+#define GNUTYPE_NAMES    'N'    /* file name that does not fit into main hdr */
+#define GNUTYPE_SPARSE   'S'    /* sparse file */
+#define GNUTYPE_VOLHDR   'V'    /* tape/volume header */
+
+
+/* tar header */
+
+#define BLOCKSIZE     512
+#define SHORTNAMESIZE 100
 
 struct tar_header
 {                               /* byte offset */
@@ -71,11 +86,20 @@ struct tar_header
                                 /* 500 */
 };
 
-union tar_buffer {
+union tar_buffer
+{
   char               buffer[BLOCKSIZE];
   struct tar_header  header;
 };
 
+struct attr_item
+{
+  struct attr_item  *next;
+  char              *fname;
+  int                mode;
+  time_t             time;
+};
+
 enum { TGZ_EXTRACT, TGZ_LIST, TGZ_INVALID };
 
 char *TGZfname          OF((const char *));
@@ -84,6 +108,9 @@ void TGZnotfound        OF((const char *));
 int getoct              OF((char *, int));
 char *strtime           OF((time_t *));
 int setfiletime         OF((char *, time_t));
+void push_attr          OF((struct attr_item **, char *, int, time_t));
+void restore_attr       OF((struct attr_item **));
+
 int ExprMatch           OF((char *, char *));
 
 int makedir             OF((char *));
@@ -221,7 +248,42 @@ int setfiletime (char *fname,time_t ftime)
 }
 
 
-/* regular expression matching */
+/* push file attributes */
+
+void push_attr(struct attr_item **list,char *fname,int mode,time_t time)
+{
+  struct attr_item *item;
+
+  item = (struct attr_item *)malloc(sizeof(struct attr_item));
+  if (item == NULL)
+    error("Out of memory");
+  item->fname = strdup(fname);
+  item->mode  = mode;
+  item->time  = time;
+  item->next  = *list;
+  *list       = item;
+}
+
+
+/* restore file attributes */
+
+void restore_attr(struct attr_item **list)
+{
+  struct attr_item *item, *prev;
+
+  for (item = *list; item != NULL; )
+    {
+      setfiletime(item->fname,item->time);
+      chmod(item->fname,item->mode);
+      prev = item;
+      item = item->next;
+      free(prev);
+    }
+  *list = NULL;
+}
+
+
+/* match regular expression */
 
 #define ISSPECIAL(c) (((c) == '*') || ((c) == '/'))
 
@@ -332,6 +394,7 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
   char   fname[BLOCKSIZE];
   int    tarmode;
   time_t tartime;
+  struct attr_item *attributes = NULL;
 
   if (action == TGZ_LIST)
     printf("    date      time     size                       file\n"
@@ -354,14 +417,15 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
       /*
        * If we have to get a tar header
        */
-      if (getheader == 1)
+      if (getheader >= 1)
         {
           /*
            * if we met the end of the tar
            * or the end-of-tar block,
            * we are done
            */
-          if ((len == 0) || (buffer.header.name[0] == 0)) break;
+          if (len == 0 || buffer.header.name[0] == 0)
+            break;
 
           tarmode = getoct(buffer.header.mode,8);
           tartime = (time_t)getoct(buffer.header.mtime,12);
@@ -371,8 +435,25 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
               action = TGZ_INVALID;
             }
 
-          strcpy(fname,buffer.header.name);
+          if (getheader == 1)
+            {
+              strncpy(fname,buffer.header.name,SHORTNAMESIZE);
+              if (fname[SHORTNAMESIZE-1] != 0)
+                  fname[SHORTNAMESIZE] = 0;
+            }
+          else
+            {
+              /*
+               * The file name is longer than SHORTNAMESIZE
+               */
+              if (strncmp(fname,buffer.header.name,SHORTNAMESIZE-1) != 0)
+                  error("bad long name");
+              getheader = 1;
+            }
 
+          /*
+           * Act according to the type flag
+           */
           switch (buffer.header.typeflag)
             {
             case DIRTYPE:
@@ -381,7 +462,7 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
               if (action == TGZ_EXTRACT)
                 {
                   makedir(fname);
-                  setfiletime(fname,tartime);
+                  push_attr(&attributes,fname,tarmode,tartime);
                 }
               break;
             case REGTYPE:
@@ -419,6 +500,24 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
                 }
               getheader = 0;
               break;
+            case GNUTYPE_LONGLINK:
+            case GNUTYPE_LONGNAME:
+              remaining = getoct(buffer.header.size,12);
+              if (remaining < 0 || remaining >= BLOCKSIZE)
+                {
+                  action = TGZ_INVALID;
+                  break;
+                }
+              len = gzread(in, fname, BLOCKSIZE);
+              if (len < 0)
+                error(gzerror(in, &err));
+              if (fname[BLOCKSIZE-1] != 0 || (int)strlen(fname) > remaining)
+                {
+                  action = TGZ_INVALID;
+                  break;
+                }
+              getheader = 2;
+              break;
             default:
               if (action == TGZ_LIST)
                 printf(" %s     <---> %s\n",strtime(&tartime),fname);
@@ -433,7 +532,8 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
             {
               if (fwrite(&buffer,sizeof(char),bytes,outfile) != bytes)
                 {
-                  fprintf(stderr,"%s: Error writing %s -- skipping\n",prog,fname);
+                  fprintf(stderr,
+                    "%s: Error writing %s -- skipping\n",prog,fname);
                   fclose(outfile);
                   outfile = NULL;
                   remove(fname);
@@ -450,7 +550,7 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
               fclose(outfile);
               outfile = NULL;
               if (action != TGZ_INVALID)
-                setfiletime(fname,tartime);
+                push_attr(&attributes,fname,tarmode,tartime);
             }
         }
 
@@ -464,6 +564,11 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
         }
     }
 
+  /*
+   * Restore file modes and time stamps
+   */
+  restore_attr(&attributes);
+
   if (gzclose(in) != Z_OK)
     error("failed gzclose");
 
@@ -475,7 +580,7 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
 
 void help(int exitval)
 {
-  printf("untgz version 0.2\n"
+  printf("untgz version 0.2.1\n"
          "  using zlib version %s\n\n",
          zlibVersion());
   printf("Usage: untgz file.tgz            extract all files\n"
diff --git a/zlib/contrib/visual-basic.txt b/zlib/contrib/visual-basic.txt
deleted file mode 100644
index 57efe58124e..00000000000
--- a/zlib/contrib/visual-basic.txt
+++ /dev/null
@@ -1,160 +0,0 @@
-See below some functions declarations for Visual Basic.
-
-Frequently Asked Question:
-
-Q: Each time I use the compress function I get the -5 error (not enough
-   room in the output buffer).
-
-A: Make sure that the length of the compressed buffer is passed by
-   reference ("as any"), not by value ("as long"). Also check that
-   before the call of compress this length is equal to the total size of
-   the compressed buffer and not zero.
-
-
-From: "Jon Caruana" <jon-net@usa.net>
-Subject: Re: How to port zlib declares to vb?
-Date: Mon, 28 Oct 1996 18:33:03 -0600
-
-Got the answer! (I haven't had time to check this but it's what I got, and
-looks correct):
-
-He has the following routines working:
-        compress
-        uncompress
-        gzopen
-        gzwrite
-        gzread
-        gzclose
-
-Declares follow: (Quoted from Carlos Rios <c_rios@sonda.cl>, in Vb4 form)
-
-#If Win16 Then   'Use Win16 calls.
-Declare Function compress Lib "ZLIB.DLL" (ByVal compr As
-        String, comprLen As Any, ByVal buf As String, ByVal buflen
-        As Long) As Integer
-Declare Function uncompress Lib "ZLIB.DLL" (ByVal uncompr
-        As String, uncomprLen As Any, ByVal compr As String, ByVal
-        lcompr As Long) As Integer
-Declare Function gzopen Lib "ZLIB.DLL" (ByVal filePath As
-        String, ByVal mode As String) As Long
-Declare Function gzread Lib "ZLIB.DLL" (ByVal file As
-        Long, ByVal uncompr As String, ByVal uncomprLen As Integer)
-        As Integer
-Declare Function gzwrite Lib "ZLIB.DLL" (ByVal file As
-        Long, ByVal uncompr As String, ByVal uncomprLen As Integer)
-        As Integer
-Declare Function gzclose Lib "ZLIB.DLL" (ByVal file As
-        Long) As Integer
-#Else
-Declare Function compress Lib "ZLIB32.DLL"
-        (ByVal compr As String, comprLen As Any, ByVal buf As
-        String, ByVal buflen As Long) As Integer
-Declare Function uncompress Lib "ZLIB32.DLL"
-        (ByVal uncompr As String, uncomprLen As Any, ByVal compr As
-        String, ByVal lcompr As Long) As Long
-Declare Function gzopen Lib "ZLIB32.DLL"
-        (ByVal file As String, ByVal mode As String) As Long
-Declare Function gzread Lib "ZLIB32.DLL"
-        (ByVal file As Long, ByVal uncompr As String, ByVal
-        uncomprLen As Long) As Long
-Declare Function gzwrite Lib "ZLIB32.DLL"
-        (ByVal file As Long, ByVal uncompr As String, ByVal
-        uncomprLen As Long) As Long
-Declare Function gzclose Lib "ZLIB32.DLL"
-        (ByVal file As Long) As Long
-#End If
-
--Jon Caruana
-jon-net@usa.net
-Microsoft Sitebuilder Network Level 1 Member - HTML Writer's Guild Member
-
-
-Here is another example from Michael <michael_borgsys@hotmail.com> that he
-says conforms to the VB guidelines, and that solves the problem of not
-knowing the uncompressed size by storing it at the end of the file:
-
-'Calling the functions:
-'bracket meaning: <parameter> [optional] {Range of possible values}
-'Call subCompressFile(<path with filename to compress> [, <path with
-filename to write to>, [level of compression {1..9}]])
-'Call subUncompressFile(<path with filename to compress>)
-
-Option Explicit
-Private lngpvtPcnSml As Long 'Stores value for 'lngPercentSmaller'
-Private Const SUCCESS As Long = 0
-Private Const strFilExt As String = ".cpr"
-Private Declare Function lngfncCpr Lib "zlib.dll" Alias "compress2" (ByRef
-dest As Any, ByRef destLen As Any, ByRef src As Any, ByVal srcLen As Long,
-ByVal level As Integer) As Long
-Private Declare Function lngfncUcp Lib "zlib.dll" Alias "uncompress" (ByRef
-dest As Any, ByRef destLen As Any, ByRef src As Any, ByVal srcLen As Long)
-As Long
-
-Public Sub subCompressFile(ByVal strargOriFilPth As String, Optional ByVal
-strargCprFilPth As String, Optional ByVal intLvl As Integer = 9)
-    Dim strCprPth As String
-    Dim lngOriSiz As Long
-    Dim lngCprSiz As Long
-    Dim bytaryOri() As Byte
-    Dim bytaryCpr() As Byte
-    lngOriSiz = FileLen(strargOriFilPth)
-    ReDim bytaryOri(lngOriSiz - 1)
-    Open strargOriFilPth For Binary Access Read As #1
-        Get #1, , bytaryOri()
-    Close #1
-    strCprPth = IIf(strargCprFilPth = "", strargOriFilPth, strargCprFilPth)
-'Select file path and name
-    strCprPth = strCprPth & IIf(Right(strCprPth, Len(strFilExt)) =
-strFilExt, "", strFilExt) 'Add file extension if not exists
-    lngCprSiz = (lngOriSiz * 1.01) + 12 'Compression needs temporary a bit
-more space then original file size
-    ReDim bytaryCpr(lngCprSiz - 1)
-    If lngfncCpr(bytaryCpr(0), lngCprSiz, bytaryOri(0), lngOriSiz, intLvl) =
-SUCCESS Then
-        lngpvtPcnSml = (1# - (lngCprSiz / lngOriSiz)) * 100
-        ReDim Preserve bytaryCpr(lngCprSiz - 1)
-        Open strCprPth For Binary Access Write As #1
-            Put #1, , bytaryCpr()
-            Put #1, , lngOriSiz 'Add the the original size value to the end
-(last 4 bytes)
-        Close #1
-    Else
-        MsgBox "Compression error"
-    End If
-    Erase bytaryCpr
-    Erase bytaryOri
-End Sub
-
-Public Sub subUncompressFile(ByVal strargFilPth As String)
-    Dim bytaryCpr() As Byte
-    Dim bytaryOri() As Byte
-    Dim lngOriSiz As Long
-    Dim lngCprSiz As Long
-    Dim strOriPth As String
-    lngCprSiz = FileLen(strargFilPth)
-    ReDim bytaryCpr(lngCprSiz - 1)
-    Open strargFilPth For Binary Access Read As #1
-        Get #1, , bytaryCpr()
-    Close #1
-    'Read the original file size value:
-    lngOriSiz = bytaryCpr(lngCprSiz - 1) * (2 ^ 24) _
-              + bytaryCpr(lngCprSiz - 2) * (2 ^ 16) _
-              + bytaryCpr(lngCprSiz - 3) * (2 ^ 8) _
-              + bytaryCpr(lngCprSiz - 4)
-    ReDim Preserve bytaryCpr(lngCprSiz - 5) 'Cut of the original size value
-    ReDim bytaryOri(lngOriSiz - 1)
-    If lngfncUcp(bytaryOri(0), lngOriSiz, bytaryCpr(0), lngCprSiz) = SUCCESS
-Then
-        strOriPth = Left(strargFilPth, Len(strargFilPth) - Len(strFilExt))
-        Open strOriPth For Binary Access Write As #1
-            Put #1, , bytaryOri()
-        Close #1
-    Else
-        MsgBox "Uncompression error"
-    End If
-    Erase bytaryCpr
-    Erase bytaryOri
-End Sub
-Public Property Get lngPercentSmaller() As Long
-    lngPercentSmaller = lngpvtPcnSml
-End Property
diff --git a/zlib/contrib/vstudio/vc7/zlibvc.def b/zlib/contrib/vstudio/vc7/zlibvc.def
index b5db6da4217..a40e71541f3 100644
--- a/zlib/contrib/vstudio/vc7/zlibvc.def
+++ b/zlib/contrib/vstudio/vc7/zlibvc.def
@@ -1,5 +1,5 @@
 

-VERSION		1.21

+VERSION		1.23

 

 HEAPSIZE	1048576,8192