net/vmnet: add vmnet backends to qapi/net

Create separate netdevs for each vmnet operating mode:
- vmnet-host
- vmnet-shared
- vmnet-bridged

Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Tested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Vladislav Yaroshchuk <Vladislav.Yaroshchuk@jetbrains.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

1 files changed, 131 insertions, 2 deletions

diff --git a/qapi/net.json b/qapi/net.json
index b92f3f5fb4..d6f7cfd4d6 100644
--- a/qapi/net.json
+++ b/qapi/net.json
@@ -453,6 +453,120 @@
     '*queues':       'int' } }
 
 ##
+# @NetdevVmnetHostOptions:
+#
+# vmnet (host mode) network backend.
+#
+# Allows the vmnet interface to communicate with other vmnet
+# interfaces that are in host mode and also with the host.
+#
+# @start-address: The starting IPv4 address to use for the interface.
+#                 Must be in the private IP range (RFC 1918). Must be
+#                 specified along with @end-address and @subnet-mask.
+#                 This address is used as the gateway address. The
+#                 subsequent address up to and including end-address are
+#                 placed in the DHCP pool.
+#
+# @end-address: The DHCP IPv4 range end address to use for the
+#               interface. Must be in the private IP range (RFC 1918).
+#               Must be specified along with @start-address and
+#               @subnet-mask.
+#
+# @subnet-mask: The IPv4 subnet mask to use on the interface. Must
+#               be specified along with @start-address and @subnet-mask.
+#
+# @isolated: Enable isolation for this interface. Interface isolation
+#            ensures that vmnet interface is not able to communicate
+#            with any other vmnet interfaces. Only communication with
+#            host is allowed. Requires at least macOS Big Sur 11.0.
+#
+# @net-uuid: The identifier (UUID) to uniquely identify the isolated
+#            network vmnet interface should be added to. If
+#            set, no DHCP service is provided for this interface and
+#            network communication is allowed only with other interfaces
+#            added to this network identified by the UUID. Requires
+#            at least macOS Big Sur 11.0.
+#
+# Since: 7.1
+##
+{ 'struct': 'NetdevVmnetHostOptions',
+  'data': {
+    '*start-address': 'str',
+    '*end-address':   'str',
+    '*subnet-mask':   'str',
+    '*isolated':      'bool',
+    '*net-uuid':      'str' },
+  'if': 'CONFIG_VMNET' }
+
+##
+# @NetdevVmnetSharedOptions:
+#
+# vmnet (shared mode) network backend.
+#
+# Allows traffic originating from the vmnet interface to reach the
+# Internet through a network address translator (NAT).
+# The vmnet interface can communicate with the host and with
+# other shared mode interfaces on the same subnet. If no DHCP
+# settings, subnet mask and IPv6 prefix specified, the interface can
+# communicate with any of other interfaces in shared mode.
+#
+# @start-address: The starting IPv4 address to use for the interface.
+#                 Must be in the private IP range (RFC 1918). Must be
+#                 specified along with @end-address and @subnet-mask.
+#                 This address is used as the gateway address. The
+#                 subsequent address up to and including end-address are
+#                 placed in the DHCP pool.
+#
+# @end-address: The DHCP IPv4 range end address to use for the
+#               interface. Must be in the private IP range (RFC 1918).
+#               Must be specified along with @start-address and @subnet-mask.
+#
+# @subnet-mask: The IPv4 subnet mask to use on the interface. Must
+#                be specified along with @start-address and @subnet-mask.
+#
+# @isolated: Enable isolation for this interface. Interface isolation
+#            ensures that vmnet interface is not able to communicate
+#            with any other vmnet interfaces. Only communication with
+#            host is allowed. Requires at least macOS Big Sur 11.0.
+#
+# @nat66-prefix: The IPv6 prefix to use into guest network. Must be a
+#                unique local address i.e. start with fd00::/8 and have
+#                length of 64.
+#
+# Since: 7.1
+##
+{ 'struct': 'NetdevVmnetSharedOptions',
+  'data': {
+    '*start-address': 'str',
+    '*end-address':   'str',
+    '*subnet-mask':   'str',
+    '*isolated':      'bool',
+    '*nat66-prefix':  'str' },
+  'if': 'CONFIG_VMNET' }
+
+##
+# @NetdevVmnetBridgedOptions:
+#
+# vmnet (bridged mode) network backend.
+#
+# Bridges the vmnet interface with a physical network interface.
+#
+# @ifname: The name of the physical interface to be bridged.
+#
+# @isolated: Enable isolation for this interface. Interface isolation
+#            ensures that vmnet interface is not able to communicate
+#            with any other vmnet interfaces. Only communication with
+#            host is allowed. Requires at least macOS Big Sur 11.0.
+#
+# Since: 7.1
+##
+{ 'struct': 'NetdevVmnetBridgedOptions',
+  'data': {
+    'ifname':     'str',
+    '*isolated':  'bool' },
+  'if': 'CONFIG_VMNET' }
+
+##
 # @NetClientDriver:
 #
 # Available netdev drivers.
@@ -460,10 +574,16 @@
 # Since: 2.7
 #
 #        @vhost-vdpa since 5.1
+#        @vmnet-host since 7.1
+#        @vmnet-shared since 7.1
+#        @vmnet-bridged since 7.1
 ##
 { 'enum': 'NetClientDriver',
   'data': [ 'none', 'nic', 'user', 'tap', 'l2tpv3', 'socket', 'vde',
-            'bridge', 'hubport', 'netmap', 'vhost-user', 'vhost-vdpa' ] }
+            'bridge', 'hubport', 'netmap', 'vhost-user', 'vhost-vdpa',
+            { 'name': 'vmnet-host', 'if': 'CONFIG_VMNET' },
+            { 'name': 'vmnet-shared', 'if': 'CONFIG_VMNET' },
+            { 'name': 'vmnet-bridged', 'if': 'CONFIG_VMNET' }] }
 
 ##
 # @Netdev:
@@ -477,6 +597,9 @@
 # Since: 1.2
 #
 #        'l2tpv3' - since 2.1
+#        'vmnet-host' - since 7.1
+#        'vmnet-shared' - since 7.1
+#        'vmnet-bridged' - since 7.1
 ##
 { 'union': 'Netdev',
   'base': { 'id': 'str', 'type': 'NetClientDriver' },
@@ -492,7 +615,13 @@
     'hubport':  'NetdevHubPortOptions',
     'netmap':   'NetdevNetmapOptions',
     'vhost-user': 'NetdevVhostUserOptions',
-    'vhost-vdpa': 'NetdevVhostVDPAOptions' } }
+    'vhost-vdpa': 'NetdevVhostVDPAOptions',
+    'vmnet-host': { 'type': 'NetdevVmnetHostOptions',
+                    'if': 'CONFIG_VMNET' },
+    'vmnet-shared': { 'type': 'NetdevVmnetSharedOptions',
+                      'if': 'CONFIG_VMNET' },
+    'vmnet-bridged': { 'type': 'NetdevVmnetBridgedOptions',
+                       'if': 'CONFIG_VMNET' } } }
 
 ##
 # @RxState: