| Age | Commit message (Collapse) | Author |
|---|
|
- Replace sparc pci_mmap_page_range() wrapper. This still leaves a
sparc-specific pci_mmap_resource_range(), but it's only one interface
instead of two (Arnd Bergmann)
- Remove sparc-specific pci_mmap_resource_range() by implementing
pci_iobar_pfn(). This removes the ability to map the entire PCI I/O
space using /proc/bus/pci, but we believe that's already been broken
since v2.6.28 (Arnd Bergmann)
* pci/resource:
sparc: Use generic pci_mmap_resource_range()
PCI: Remove pci_mmap_page_range() wrapper
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- New driver for logicvc - which is a display IP core.
- EDID parser rework to add new extensions
- fbcon scrolling improvements
- i915 has some more DG2 work but not enabled by default, but should
have enough features for userspace to work now.
Otherwise it's lots of work all over the place. Detailed summary:
New driver:
- logicvc
vfio:
- use aperture API
core:
- of: Add data-lane helpers and convert drivers
- connector: Remove deprecated ida_simple_get()
media:
- Add various RGB666 and RGB888 format constants
panel:
- Add HannStar HSD101PWW
- Add ETML0700Y5DHA
dma-buf:
- add sync-file API
- set dma mask for udmabuf devices
fbcon:
- Improve scrolling performance
- Sanitize input
fbdev:
- device unregistering fixes
- vesa: Support COMPILE_TEST
- Disable firmware-device registration when first native driver loads
aperture:
- fix segfault during hot-unplug
- export for use with other subsystems
client:
- use driver validated modes
dp:
- aux: make probing more reliable
- mst: Read extended DPCD capabilities during system resume
- Support waiting for HDP signal
- Port-validation fixes
edid:
- CEA data-block iterators
- struct drm_edid introduction
- implement HF-EEODB extension
gem:
- don't use fb format non-existing planes
probe-helper:
- use 640x480 as displayport fallback
scheduler:
- don't kill jobs in interrupt context
bridge:
- Add support for i.MX8qxp and i.MX8qm
- lots of fixes/cleanups
- Add TI-DLPC3433
- fy07024di26a30d: Optional GPIO reset
- ldb: Add reg and reg-name properties to bindings, Kconfig fixes
- lt9611: Fix display sensing;
- tc358767: DSI/DPI refactoring and DSI-to-eDP support, DSI lane handling
- tc358775: Fix clock settings
- ti-sn65dsi83: Allow GPIO to sleep
- adv7511: I2C fixes
- anx7625: Fix error handling; DPI fixes; Implement HDP timeout via callback
- fsl-ldb: Drop DE flip
- ti-sn65dsi86: Convert to atomic modesetting
amdgpu:
- use atomic fence helpers in DM
- fix VRAM address calculations
- export CRTC bpc via debugfs
- Initial devcoredump support
- Enable high priority gfx queue on asics which support it
- Adjust GART size on newer APUs for S/G display
- Soft reset for GFX 11 / SDMA 6
- Add gfxoff status query for vangogh
- Fix timestamps for cursor only commits
- Adjust GART size on newer APUs for S/G display
- fix buddy memory corruption
amdkfd:
- MMU notifier fixes
- P2P DMA support using dma-buf
- Add available memory IOCTL
- HMM profiler support
- Simplify GPUVM validation
- Unified memory for CWSR save/restore area
i915:
- General driver clean-up
- DG2 enabling (still under force probe)
- DG2 small BAR memory support
- HuC loading support
- DG2 workarounds
- DG2/ATS-M device IDs added
- Ponte Vecchio prep work and new blitter engines
- add Meteorlake support
- Fix sparse warnings
- DMC MMIO range checks
- Audio related fixes
- Runtime PM fixes
- PSR fixes
- Media freq factor and per-gt enhancements
- DSI fixes for ICL+
- Disable DMC flip queue handlers
- ADL_P voltage swing updates
- Use more the VBT for panel information
- Fix on Type-C ports with TBT mode
- Improve fastset and allow seamless M/N changes
- Accept more fixed modes with VRR/DMRRS panels
- Disable connector polling for a headless SKU
- ADL-S display PLL w/a
- Enable THP on Icelake and beyond
- Fix i915_gem_object_ggtt_pin_ww regression on old platforms
- Expose per tile media freq factor in sysfs
- Fix dma_resv fence handling in multi-batch execbuf
- Improve on suspend / resume time with VT-d enabled
- export CRTC bpc settings via debugfs
msm:
- gpu: a619 support
- gpu: Fix for unclocked GMU register access
- gpu: Devcore dump enhancements
- client utilization via fdinfo support
- fix fence rollover issue
- gem: Lockdep false-positive warning fix
- gem: Switch to pfn mappings
- WB support on sc7180
- dp: dropped custom bulk clock implementation
- fix link retraining on resolution change
- hdmi: dropped obsolete GPIO support
tegra:
- context isolation for host1x engines
- tegra234 soc support
mediatek:
- add vdosys0/1 for mt8195
- add MT8195 dp_intf driver
exynos:
- Fix resume function issue of exynos decon driver by calling
clk_disable_unprepare() properly if clk_prepare_enable() failed.
nouveau:
- set of misc fixes/cleanups
- display cleanups
gma500:
- Cleanup connector I2C handling
hyperv:
- Unify VRAM allocation of Gen1 and Gen2
meson:
- Support YUV422 output; Refcount fixes
mgag200:
- Support damage clipping
- Support gamma handling
- Protect concurrent HW access
- Fixes to connector
- Store model-specific limits in device-info structure
- fix PCI register init
panfrost:
- Valhall support
r128:
- Fix bit-shift overflow
rockchip:
- Locking fixes in error path
ssd130x:
- Fix built-in linkage
udl:
- Always advertize VGA connector
ast:
- Support multiple outputs
- fix black screen on resume
sun4i:
- HDMI PHY cleanups
vc4:
- Add support for BCM2711
vkms:
- Allocate output buffer with vmalloc()
mcde:
- Fix ref-count leak
mxsfb/lcdif:
- Support i.MX8MP LCD controller
stm/ltdc:
- Support dynamic Z order
- Support mirroring
ingenic:
- Fix display at maximum resolution"
* tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm: (1480 commits)
drm/amd/display: Fix a compilation failure on PowerPC caused by FPU code
drm/amdgpu: enable support for psp 13.0.4 block
drm/amdgpu: add files for PSP 13.0.4
drm/amdgpu: add header files for MP 13.0.4
drm/amdgpu: correct RLC_RLCS_BOOTLOAD_STATUS offset and index
drm/amdgpu: send msg to IMU for the front-door loading
drm/amdkfd: use time_is_before_jiffies(a + b) to replace "jiffies - a > b"
drm/amdgpu: fix hive reference leak when reflecting psp topology info
drm/amd/pm: enable GFX ULV feature support for SMU13.0.0
drm/amd/pm: update driver if header for SMU 13.0.0
drm/amdgpu: move mes self test after drm sched re-started
drm/amdgpu: drop non-necessary call trace dump
drm/amdgpu: enable VCN cg and JPEG cg/pg
drm/amdgpu: vcn_4_0_2 video codec query
drm/amdgpu: add VCN_4_0_2 firmware support
drm/amdgpu: add VCN function in NBIO v7.7
drm/amdgpu: fix a vcn4 boot poll bug in emulation mode
drm/amd/amdgpu: add memory training support for PSP_V13
drm/amdkfd: remove an unnecessary amdgpu_bo_ref
drm/amd/pm: Add get_gfx_off_status interface for yellow carp
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New driver for Semi AR0521 sensor
- rkisp1 CSI code was split into a separate file
- sun6i has gained support for the A31 MIPI CSI-2 controller
- sun8i has gained support for the A83T MIPI CSI-2 controller
- vimc driver got support for virtual lens
- HEVC uAPI has gained its final form and got added to public headers
- hantro and cedrus got updates on H-265 support
- stkwebcam was promoted from staging
- atomisp staging driver got cleanups on its hmm and kmap related logic
- ov5640 gained support for more modes and got some rework
- imx7-media-csi staging driver got several improvements related to mc
API support
- uvcvideo now handles better power line control
- mediatec vcodec gained support for new hardware and got some codec
updates
- Lots of other bug fixes, improvements and cleanups.
* tag 'media/v5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (446 commits)
media: hantro: Remove dedicated control documentation
hantro: Remove incorrect HEVC SPS validation
media: cedrus: hevc: Add check for invalid timestamp
media: sunxi: sun6i_mipi_csi2.c/sun8i_a83t_mipi_csi2.c: clarify error handling
media: uvcvideo: Fix invalid pointer in uvc_ctrl_init_ctrl()
media: Documentation: mc-core: Fix typo
media: videodev2.h.rst.exceptions: add missing exceptions
media: vimc: wrong pointer is used with PTR_ERR
media: rkisp1: debug: Add dump file in debugfs for MI main path registers
media: rkisp1: Make the internal CSI-2 receiver optional
media: rkisp1: Add infrastructure to support ISP features
media: rkisp1: Support the ISP parallel input
media: dt-bindings: media: rkisp1: Add port for parallel interface
media: rkisp1: Use fwnode_graph_for_each_endpoint
media: rkisp1: csi: Plumb the CSI RX subdev
media: rkisp1: csi: Implement a V4L2 subdev for the CSI receiver
media: rkisp1: isp: Disallow multiple active sources
media: rkisp1: isp: Rename rkisp1_get_remote_source()
media: rkisp1: isp: Constify various local variables
media: rkisp1: isp: Fix whitespace issues
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- new drivers: Microchip CoreI2C, Renesas RZV2M
- quite some DT schema conversions and extensions
- and a bunch of driver updates and improvements
* tag 'i2c-for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits)
i2c: extend documentation about retvals of master_xfer functions
i2c: mux-gpmux: Add of_node_put() when breaking out of loop
dt-bindings: i2c: i2c-rk3x: Document Rockchip RV1126
i2c: qcom-geni: Use the correct return value
i2c: cadence: Support PEC for SMBus block read
i2c: qcom-geni: Propagate GENI_ABORT_DONE to geni_i2c_abort_xfer()
i2c: brcmstb: Use dev_name() for adapter name
i2c: Add Renesas RZ/V2M controller
dt-bindings: i2c: Document RZ/V2M I2C controller
i2c: mlxcpld: Add callback to notify probing completion
i2c: scmi: Replace open coded device_get_match_data()
i2c: stm32: add support for the STM32MP13 soc
dt-bindings: i2c: st,stm32-i2c: add entry for stm32mp13
dt-bindings: i2c: i2c-rk3x: add rk3588 compatible
i2c: add support for microchip fpga i2c controllers
i2c: i801: Add support for Intel Meteor Lake-P
dt-bindings: i2c: nomadik: Add power domain to binding
dt-bindings: i2c: nomadik: Drop unused voltage supply from example
i2c: Fix a potential use after free
i2c: hisi: use HZ_PER_KHZ macro in units.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Paolo Abeni:
"Core:
- Refactor the forward memory allocation to better cope with memory
pressure with many open sockets, moving from a per socket cache to
a per-CPU one
- Replace rwlocks with RCU for better fairness in ping, raw sockets
and IP multicast router.
- Network-side support for IO uring zero-copy send.
- A few skb drop reason improvements, including codegen the source
file with string mapping instead of using macro magic.
- Rename reference tracking helpers to a more consistent netdev_*
schema.
- Adapt u64_stats_t type to address load/store tearing issues.
- Refine debug helper usage to reduce the log noise caused by bots.
BPF:
- Improve socket map performance, avoiding skb cloning on read
operation.
- Add support for 64 bits enum, to match types exposed by kernel.
- Introduce support for sleepable uprobes program.
- Introduce support for enum textual representation in libbpf.
- New helpers to implement synproxy with eBPF/XDP.
- Improve loop performances, inlining indirect calls when possible.
- Removed all the deprecated libbpf APIs.
- Implement new eBPF-based LSM flavor.
- Add type match support, which allow accurate queries to the eBPF
used types.
- A few TCP congetsion control framework usability improvements.
- Add new infrastructure to manipulate CT entries via eBPF programs.
- Allow for livepatch (KLP) and BPF trampolines to attach to the same
kernel function.
Protocols:
- Introduce per network namespace lookup tables for unix sockets,
increasing scalability and reducing contention.
- Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.
- Add support to forciby close TIME_WAIT TCP sockets via user-space
tools.
- Significant performance improvement for the TLS 1.3 receive path,
both for zero-copy and not-zero-copy.
- Support for changing the initial MTPCP subflow priority/backup
status
- Introduce virtually contingus buffers for sockets over RDMA, to
cope better with memory pressure.
- Extend CAN ethtool support with timestamping capabilities
- Refactor CAN build infrastructure to allow building only the needed
features.
Driver API:
- Remove devlink mutex to allow parallel commands on multiple links.
- Add support for pause stats in distributed switch.
- Implement devlink helpers to query and flash line cards.
- New helper for phy mode to register conversion.
New hardware / drivers:
- Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.
- Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.
- Ethernet DSA driver for the Microchip LAN937x switch.
- Ethernet PHY driver for the Aquantia AQR113C EPHY.
- CAN driver for the OBD-II ELM327 interface.
- CAN driver for RZ/N1 SJA1000 CAN controller.
- Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.
Drivers:
- Intel Ethernet NICs:
- i40e: add support for vlan pruning
- i40e: add support for XDP framented packets
- ice: improved vlan offload support
- ice: add support for PPPoE offload
- Mellanox Ethernet (mlx5)
- refactor packet steering offload for performance and scalability
- extend support for TC offload
- refactor devlink code to clean-up the locking schema
- support stacked vlans for bridge offloads
- use TLS objects pool to improve connection rate
- Netronome Ethernet NICs (nfp):
- extend support for IPv6 fields mangling offload
- add support for vepa mode in HW bridge
- better support for virtio data path acceleration (VDPA)
- enable TSO by default
- Microsoft vNIC driver (mana)
- add support for XDP redirect
- Others Ethernet drivers:
- bonding: add per-port priority support
- microchip lan743x: extend phy support
- Fungible funeth: support UDP segmentation offload and XDP xmit
- Solarflare EF100: add support for virtual function representors
- MediaTek SoC: add XDP support
- Mellanox Ethernet/IB switch (mlxsw):
- dropped support for unreleased H/W (XM router).
- improved stats accuracy
- unified bridge model coversion improving scalability (parts 1-6)
- support for PTP in Spectrum-2 asics
- Broadcom PHYs
- add PTP support for BCM54210E
- add support for the BCM53128 internal PHY
- Marvell Ethernet switches (prestera):
- implement support for multicast forwarding offload
- Embedded Ethernet switches:
- refactor OcteonTx MAC filter for better scalability
- improve TC H/W offload for the Felix driver
- refactor the Microchip ksz8 and ksz9477 drivers to share the
probe code (parts 1, 2), add support for phylink mac
configuration
- Other WiFi:
- Microchip wilc1000: diable WEP support and enable WPA3
- Atheros ath10k: encapsulation offload support
Old code removal:
- Neterion vxge ethernet driver: this is untouched since more than 10 years"
* tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits)
doc: sfp-phylink: Fix a broken reference
wireguard: selftests: support UML
wireguard: allowedips: don't corrupt stack when detecting overflow
wireguard: selftests: update config fragments
wireguard: ratelimiter: use hrtimer in selftest
net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ
net: usb: ax88179_178a: Bind only to vendor-specific interface
selftests: net: fix IOAM test skip return code
net: usb: make USB_RTL8153_ECM non user configurable
net: marvell: prestera: remove reduntant code
octeontx2-pf: Reduce minimum mtu size to 60
net: devlink: Fix missing mutex_unlock() call
net/tls: Remove redundant workqueue flush before destroy
net: txgbe: Fix an error handling path in txgbe_probe()
net: dsa: Fix spelling mistakes and cleanup code
Documentation: devlink: add add devlink-selftests to the table of contents
dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock
net: ionic: fix error check for vlan flags in ionic_set_nic_features()
net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr()
nfp: flower: add support for tunnel offload without key ID
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull efivars sysfs interface removal from Ard Biesheuvel:
"Remove the obsolete 'efivars' sysfs based interface to the EFI
variable store, now that all users have moved to the efivarfs pseudo
file system, which was created ~10 years ago to address some
fundamental shortcomings in the sysfs based driver.
Move the 'business logic' related to which EFI variables are important
and may affect the boot flow from the efivars support layer into the
efivarfs pseudo file system, so it is no longer exposed to other parts
of the kernel"
* tag 'efi-efivars-removal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: vars: Move efivar caching layer into efivarfs
efi: vars: Switch to new wrapper layer
efi: vars: Remove deprecated 'efivars' sysfs interface
|
|
Initial device to be supported by the upcoming tpm_tis_i2c driver. More
to be added later.
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs lseek updates from Al Viro:
"Jason's lseek series.
Saner handling of 'lseek should fail with ESPIPE' - this gets rid of
the magical no_llseek thing and makes checks consistent.
In particular, the ad-hoc "can we do splice via internal pipe" checks
got saner (and somewhat more permissive, which is what Jason had been
after, AFAICT)"
* tag 'pull-work.lseek' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: remove no_llseek
fs: check FMODE_LSEEK to control internal pipe splicing
vfio: do not set FMODE_LSEEK flag
dma-buf: remove useless FMODE_LSEEK flag
fs: do not compare against ->llseek
fs: clear or set FMODE_LSEEK based on llseek function
|
|
Pull folio updates from Matthew Wilcox:
- Fix an accounting bug that made NR_FILE_DIRTY grow without limit
when running xfstests
- Convert more of mpage to use folios
- Remove add_to_page_cache() and add_to_page_cache_locked()
- Convert find_get_pages_range() to filemap_get_folios()
- Improvements to the read_cache_page() family of functions
- Remove a few unnecessary checks of PageError
- Some straightforward filesystem conversions to use folios
- Split PageMovable users out from address_space_operations into
their own movable_operations
- Convert aops->migratepage to aops->migrate_folio
- Remove nobh support (Christoph Hellwig)
* tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache: (78 commits)
fs: remove the NULL get_block case in mpage_writepages
fs: don't call ->writepage from __mpage_writepage
fs: remove the nobh helpers
jfs: stop using the nobh helper
ext2: remove nobh support
ntfs3: refactor ntfs_writepages
mm/folio-compat: Remove migration compatibility functions
fs: Remove aops->migratepage()
secretmem: Convert to migrate_folio
hugetlb: Convert to migrate_folio
aio: Convert to migrate_folio
f2fs: Convert to filemap_migrate_folio()
ubifs: Convert to filemap_migrate_folio()
btrfs: Convert btrfs_migratepage to migrate_folio
mm/migrate: Add filemap_migrate_folio()
mm/migrate: Convert migrate_page() to migrate_folio()
nfs: Convert to migrate_folio
btrfs: Convert btree_migratepage to migrate_folio
mm/migrate: Convert expected_page_refs() to folio_expected_refs()
mm/migrate: Convert buffer_migrate_page() to buffer_migrate_folio()
...
|
|
Pull XArray/IDR updates from Matthew Wilcox:
- Add appropriate might_alloc() annotations to the XArray APIs
- Document that the IDR is deprecated
* tag 'xarray-6.0' of git://git.infradead.org/users/willy/xarray:
IDR: Note that the IDR API is deprecated
XArray: Add calls to might_alloc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"Several core optimizations:
- threadgroup_rwsem write locking is skipped when configuring
controllers in empty subtrees.
Combined with CLONE_INTO_CGROUP, this allows the common static
usage pattern to not grab threadgroup_rwsem at all (glibc still
doesn't seem ready for CLONE_INTO_CGROUP unfortunately).
- threadgroup_rwsem used to be put into non-percpu mode by default
due to latency concerns in specific use cases. There's no reason
for everyone else to pay for it. Make the behavior optional.
- psi no longer allocates memory when disabled.
... along with some code cleanups"
* tag 'cgroup-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Skip subtree root in cgroup_update_dfl_csses()
cgroup: remove "no" prefixed mount options
cgroup: Make !percpu threadgroup_rwsem operations optional
cgroup: Add "no" prefixed mount options
cgroup: Elide write-locking threadgroup_rwsem when updating csses on an empty subtree
cgroup.c: remove redundant check for mixable cgroup in cgroup_migrate_vet_dst
cgroup.c: add helper __cset_cgroup_from_root to cleanup duplicated codes
psi: dont alloc memory for psi by default
|
|
The AVR32 architecture has been removed from the kernel in commit
26202873bb51fafdaa51be3e8de7aab9beb49f70, hence clean out the
atmel,at32ap-lcdc parts in the atmel_lcdfb.c video driver.
AVR32 architecture never supported device tree, hence this code was not
used by anybody.
Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
|
|
The AVR32 architecture has been removed from the kernel in commit
26202873bb51fafdaa51be3e8de7aab9beb49f70, hence clean out the
cdns,at32ap7000-macb compatible entry in Cadence macb Ethernet driver.
AVR32 architecture never supported device tree, hence this code was not
used by anybody.
Updated documentation to match the default entry, no users of
cdns,at32ap7000-macb in the kernel tree.
Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
|
|
The commit in Fixes: has changed a .txt file into a .yaml file. Update the
documentation accordingly.
While at it add some `` around some file names to improve the output.
Fixes: 70991f1e6858 ("dt-bindings: net: convert sff,sfp to dtschema")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/be3c7e87ca7f027703247eccfe000b8e34805094.1659247114.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 3103084afcf234 ("ext4, doc: remove unnecessary escaping") removes
redundant underscore escaping, however the cell spacing in heading row of
blockmap table became not aligned anymore, hence triggers malformed table
warning:
Documentation/filesystems/ext4/blockmap.rst:3: WARNING: Malformed table.
+---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| i.i_block Offset | Where It Points |
<snipped>...
The warning caused the table not being loaded.
Realign the heading row cell by adding missing space at the first cell
to fix the warning.
Fixes: 3103084afcf234 ("ext4, doc: remove unnecessary escaping")
Cc: stable@kernel.org
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Wang Jianjian <wangjianjian3@huawei.com>
Cc: linux-ext4@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20220619072938.7334-1-bagasdotme@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"This consists of several fixes and an important feature to discourage
running KUnit tests on production systems. Running tests on a
production system could leave the system in a bad state.
Summary:
- Add a new taint type, TAINT_TEST to signal that a test has been
run.
This should discourage people from running these tests on
production systems, and to make it easier to tell if tests have
been run accidentally (by loading the wrong configuration, etc)
- Several documentation and tool enhancements and fixes"
* tag 'linux-kselftest-kunit-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits)
Documentation: KUnit: Fix example with compilation error
Documentation: kunit: Add CLI args for kunit_tool
kcsan: test: Add a .kunitconfig to run KCSAN tests
kunit: executor: Fix a memory leak on failure in kunit_filter_tests
clk: explicitly disable CONFIG_UML_PCI_OVER_VIRTIO in .kunitconfig
mmc: sdhci-of-aspeed: test: Use kunit_test_suite() macro
nitro_enclaves: test: Use kunit_test_suite() macro
thunderbolt: test: Use kunit_test_suite() macro
kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites
kunit: unify module and builtin suite definitions
selftest: Taint kernel when test module loaded
module: panic: Taint the kernel when selftest modules load
Documentation: kunit: fix example run_kunit func to allow spaces in args
Documentation: kunit: Cleanup run_wrapper, fix x-ref
kunit: test.h: fix a kernel-doc markup
kunit: tool: Enable virtio/PCI by default on UML
kunit: tool: make --kunitconfig repeatable, blindly concat
kunit: add coverage_uml.config to enable GCOV on UML
kunit: tool: refactor internal kconfig handling, allow overriding
kunit: tool: introduce --qemu_args
...
|
|
Pull documentation updates from Jonathan Corbet:
"This was a moderately busy cycle for documentation, but nothing
all that earth-shaking:
- More Chinese translations, and an update to the Italian
translations.
The Japanese, Korean, and traditional Chinese translations
are more-or-less unmaintained at this point, instead.
- Some build-system performance improvements.
- The removal of the archaic submitting-drivers.rst document,
with the movement of what useful material that remained into
other docs.
- Improvements to sphinx-pre-install to, hopefully, give more
useful suggestions.
- A number of build-warning fixes
Plus the usual collection of typo fixes, updates, and more"
* tag 'docs-6.0' of git://git.lwn.net/linux: (92 commits)
docs: efi-stub: Fix paths for x86 / arm stubs
Docs/zh_CN: Update the translation of sched-stats to 5.19-rc8
Docs/zh_CN: Update the translation of pci to 5.19-rc8
Docs/zh_CN: Update the translation of pci-iov-howto to 5.19-rc8
Docs/zh_CN: Update the translation of usage to 5.19-rc8
Docs/zh_CN: Update the translation of testing-overview to 5.19-rc8
Docs/zh_CN: Update the translation of sparse to 5.19-rc8
Docs/zh_CN: Update the translation of kasan to 5.19-rc8
Docs/zh_CN: Update the translation of iio_configfs to 5.19-rc8
doc:it_IT: align Italian documentation
docs: Remove spurious tag from admin-guide/mm/overcommit-accounting.rst
Documentation: process: Update email client instructions for Thunderbird
docs: ABI: correct QEMU fw_cfg spec path
doc/zh_CN: remove submitting-driver reference from docs
docs: zh_TW: align to submitting-drivers removal
docs: zh_CN: align to submitting-drivers removal
docs: ko_KR: howto: remove reference to removed submitting-drivers
docs: ja_JP: howto: remove reference to removed submitting-drivers
docs: it_IT: align to submitting-drivers removal
docs: process: remove outdated submitting-drivers.rst
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates
- Miscellaneous fixes
- Callback-offload updates, perhaps most notably a new
RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be
offloaded at boot time, regardless of kernel boot parameters.
This is useful to battery-powered systems such as ChromeOS and
Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot
parameter prevents offloaded callbacks from interfering with
real-time workloads and with energy-efficiency mechanisms
- Polled grace-period updates, perhaps most notably making these APIs
account for both normal and expedited grace periods
- Tasks RCU updates, perhaps most notably reducing the CPU overhead of
RCU tasks trace grace periods by more than a factor of two on a
system with 15,000 tasks.
The reduction is expected to increase with the number of tasks, so it
seems reasonable to hypothesize that a system with 150,000 tasks
might see a 20-fold reduction in CPU overhead
- Torture-test updates
- Updates that merge RCU's dyntick-idle tracking into context tracking,
thus reducing the overhead of transitioning to kernel mode from
either idle or nohz_full userspace execution for kernels that track
context independently of RCU.
This is expected to be helpful primarily for kernels built with
CONFIG_NO_HZ_FULL=y
* tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits)
rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings
rcu: Diagnose extended sync_rcu_do_polled_gp() loops
rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings
rcutorture: Test polled expedited grace-period primitives
rcu: Add polled expedited grace-period primitives
rcutorture: Verify that polled GP API sees synchronous grace periods
rcu: Make Tiny RCU grace periods visible to polled APIs
rcu: Make polled grace-period API account for expedited grace periods
rcu: Switch polled grace-period APIs to ->gp_seq_polled
rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty
rcu/nocb: Add option to opt rcuo kthreads out of RT priority
rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread()
rcu/nocb: Add an option to offload all CPUs on boot
rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call
rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order
rcu/nocb: Add/del rdp to iterate from rcuog itself
rcu/tree: Add comment to describe GP-done condition in fqs loop
rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs()
rcu/kvfree: Remove useless monitor_todo flag
rcu: Cleanup RCU urgency state for offline CPU
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Make proc files report fips module name and version
Algorithms:
- Move generic SHA1 code into lib/crypto
- Implement Chinese Remainder Theorem for RSA
- Remove blake2s
- Add XCTR with x86/arm64 acceleration
- Add POLYVAL with x86/arm64 acceleration
- Add HCTR2
- Add ARIA
Drivers:
- Add support for new CCP/PSP device ID in ccp"
* tag 'v5.20-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (89 commits)
crypto: tcrypt - Remove the static variable initialisations to NULL
crypto: arm64/poly1305 - fix a read out-of-bound
crypto: hisilicon/zip - Use the bitmap API to allocate bitmaps
crypto: hisilicon/sec - fix auth key size error
crypto: ccree - Remove a useless dma_supported() call
crypto: ccp - Add support for new CCP/PSP device ID
crypto: inside-secure - Add missing MODULE_DEVICE_TABLE for of
crypto: hisilicon/hpre - don't use GFP_KERNEL to alloc mem during softirq
crypto: testmgr - some more fixes to RSA test vectors
cyrpto: powerpc/aes - delete the rebundant word "block" in comments
hwrng: via - Fix comment typo
crypto: twofish - Fix comment typo
crypto: rmd160 - fix Kconfig "its" grammar
crypto: keembay-ocs-ecc - Drop if with an always false condition
Documentation: qat: rewrite description
Documentation: qat: Use code block for qat sysfs example
crypto: lib - add module license to libsha1
crypto: lib - make the sha1 library optional
crypto: lib - move lib/sha1.c into lib/crypto/
crypto: fips - make proc files report fips module name and version
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"Though there's been a decent amount of RNG-related development during
this last cycle, not all of it is coming through this tree, as this
cycle saw a shift toward tackling early boot time seeding issues,
which took place in other trees as well.
Here's a summary of the various patches:
- The CONFIG_ARCH_RANDOM .config option and the "nordrand" boot
option have been removed, as they overlapped with the more widely
supported and more sensible options, CONFIG_RANDOM_TRUST_CPU and
"random.trust_cpu". This change allowed simplifying a bit of arch
code.
- x86's RDRAND boot time test has been made a bit more robust, with
RDRAND disabled if it's clearly producing bogus results. This would
be a tip.git commit, technically, but I took it through random.git
to avoid a large merge conflict.
- The RNG has long since mixed in a timestamp very early in boot, on
the premise that a computer that does the same things, but does so
starting at different points in wall time, could be made to still
produce a different RNG state. Unfortunately, the clock isn't set
early in boot on all systems, so now we mix in that timestamp when
the time is actually set.
- User Mode Linux now uses the host OS's getrandom() syscall to
generate a bootloader RNG seed and later on treats getrandom() as
the platform's RDRAND-like faculty.
- The arch_get_random_{seed_,}_long() family of functions is now
arch_get_random_{seed_,}_longs(), which enables certain platforms,
such as s390, to exploit considerable performance advantages from
requesting multiple CPU random numbers at once, while at the same
time compiling down to the same code as before on platforms like
x86.
- A small cleanup changing a cmpxchg() into a try_cmpxchg(), from
Uros.
- A comment spelling fix"
More info about other random number changes that come in through various
architecture trees in the full commentary in the pull request:
https://lore.kernel.org/all/20220731232428.2219258-1-Jason@zx2c4.com/
* tag 'random-6.0-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: correct spelling of "overwrites"
random: handle archrandom with multiple longs
um: seed rng using host OS rng
random: use try_cmpxchg in _credit_init_bits
timekeeping: contribute wall clock to rng on time change
x86/rdrand: Remove "nordrand" flag in favor of "random.trust_cpu"
random: remove CONFIG_ARCH_RANDOM
|
|
Add as module parameters these options:
memory_backed
discard
mbps
cache_size
Previously these could only be set via configfs.
Still missing is bad_blocks.
The kernel test robot found a documentation formatting issue in v1 of
this patch.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vincent Fu <vincent.fu@samsung.com>
Link: https://lore.kernel.org/r/20220708174943.87787-2-vincent.fu@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fsverity update from Eric Biggers:
"Just a small documentation update to mention the btrfs support"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fs-verity: mention btrfs support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"A relatively small set of patches for SELinux this time, eight patches
in total with really only one significant change.
The highlights are:
- Add support for proper labeling of memfd_secret anonymous inodes.
This will allow LSMs that implement the anonymous inode hooks to
apply security policy to memfd_secret() fds.
- Various small improvements to memory management: fixed leaks, freed
memory when needed, boundary checks.
- Hardened the selinux_audit_data struct with __randomize_layout.
- A minor documentation tweak to fix a formatting/style issue"
* tag 'selinux-pr-20220801' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: selinux_add_opt() callers free memory
selinux: Add boundary check in put_entry()
selinux: fix memleak in security_read_state_kernel()
docs: selinux: add '=' signs to kernel boot options
mm: create security context for memfd_secret inodes
selinux: fix typos in comments
selinux: drop unnecessary NULL check
selinux: add __randomize_layout to selinux_audit_data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Refactor DM core's mempool allocation so that it clearer by not being
split acorss files.
- Improve DM core's BLK_STS_DM_REQUEUE and BLK_STS_AGAIN handling.
- Optimize DM core's more common bio splitting by eliminating the use
of bio cloning with bio_split+bio_chain. Shift that cloning cost to
the relatively unlikely dm_io requeue case that only occurs during
error handling. Introduces dm_io_rewind() that will clone a bio that
reflects the subset of the original bio that must be requeued.
- Remove DM core's dm_table_get_num_targets() wrapper and audit all
dm_table_get_target() callers.
- Fix potential for OOM with DM writecache target by setting a default
MAX_WRITEBACK_JOBS (set to 256MiB or 1/16 of total system memory,
whichever is smaller).
- Fix DM writecache target's stats that are reported through
DM-specific table info.
- Fix use-after-free crash in dm_sm_register_threshold_callback().
- Refine DM core's Persistent Reservation handling in preparation for
broader work Mike Christie is doing to add compatibility with
Microsoft Windows Failover Cluster.
- Fix various KASAN reported bugs in the DM raid target.
- Fix DM raid target crash due to md_handle_request() bio splitting
that recurses to block core without properly initializing the bio's
bi_dev.
- Fix some code comment typos and fix some Documentation formatting.
* tag 'for-6.0/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (29 commits)
dm: fix dm-raid crash if md_handle_request() splits bio
dm raid: fix address sanitizer warning in raid_resume
dm raid: fix address sanitizer warning in raid_status
dm: Start pr_preempt from the same starting path
dm: Fix PR release handling for non All Registrants
dm: Start pr_reserve from the same starting path
dm: Allow dm_call_pr to be used for path searches
dm: return early from dm_pr_call() if DM device is suspended
dm thin: fix use-after-free crash in dm_sm_register_threshold_callback
dm writecache: count number of blocks discarded, not number of discard bios
dm writecache: count number of blocks written, not number of write bios
dm writecache: count number of blocks read, not number of read bios
dm writecache: return void from functions
dm kcopyd: use __GFP_HIGHMEM when allocating pages
dm writecache: set a default MAX_WRITEBACK_JOBS
Documentation: dm writecache: Render status list as list
Documentation: dm writecache: add blank line before optional parameters
dm snapshot: fix typo in snapshot_map() comment
dm raid: remove redundant "the" in parse_raid_params() comment
dm cache: fix typo in 2 comment blocks
...
|
|
Pull block updates from Jens Axboe:
- Improve the type checking of request flags (Bart)
- Ensure queue mapping for a single queues always picks the right queue
(Bart)
- Sanitize the io priority handling (Jan)
- rq-qos race fix (Jinke)
- Reserved tags handling improvements (John)
- Separate memory alignment from file/disk offset aligment for O_DIRECT
(Keith)
- Add new ublk driver, userspace block driver using io_uring for
communication with the userspace backend (Ming)
- Use try_cmpxchg() to cleanup the code in various spots (Uros)
- Finally remove bdevname() (Christoph)
- Clean up the zoned device handling (Christoph)
- Clean up independent access range support (Christoph)
- Clean up and improve block sysfs handling (Christoph)
- Clean up and improve teardown of block devices.
This turns the usual two step process into something that is simpler
to implement and handle in block drivers (Christoph)
- Clean up chunk size handling (Christoph)
- Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
Ming, Sebastian, Yang, Ying)
* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
ublk_drv: fix double shift bug
ublk_drv: make sure that correct flags(features) returned to userspace
ublk_drv: fix error handling of ublk_add_dev
ublk_drv: fix lockdep warning
block: remove __blk_get_queue
block: call blk_mq_exit_queue from disk_release for never added disks
blk-mq: fix error handling in __blk_mq_alloc_disk
ublk: defer disk allocation
ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
ublk: cleanup ublk_ctrl_uring_cmd
ublk: simplify ublk_ch_open and ublk_ch_release
ublk: remove the empty open and release block device operations
ublk: remove UBLK_IO_F_PREFLUSH
ublk: add a MAINTAINERS entry
block: don't allow the same type rq_qos add more than once
mmc: fix disk/queue leak in case of adding disk failure
ublk_drv: fix an IS_ERR() vs NULL check
ublk: remove UBLK_IO_F_INTEGRITY
ublk_drv: remove unneeded semicolon
...
|
|
Add a compatible for SM6375.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
i.MX MU has a MUR bit which is to reset both the Processor B and the
Processor A sides of the MU module, forcing all control and status
registers to return to their default values (except the BHR bit in the ACR
register and BHRM bit in BCR register), and all internal states to be
cleared.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
entries
msm8916, msm8939, msm8953, msm8994 and qcs404 already declare or should
declare syscon as they have drivers that use syscon inside of the apcs-kpss
block.
grep apcs arch/arm64/boot/dts/qcom/* | grep syscon
Add in the additional syscon in the documentation for the above mentioned
parts.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
into clk-next
* clk-renesas: (22 commits)
clk: renesas: rcar-gen4: Fix initconst confusion for cpg_pll_config
clk: renesas: r9a07g043: Add support for RZ/Five SoC
dt-bindings: clock: r9a07g043-cpg: Add Renesas RZ/Five CPG Clock and Reset Definitions
clk: renesas: r8a779f0: Add HSCIF clocks
clk: renesas: r8a779f0: Add PCIe clocks
clk: renesas: r8a779f0: Add Z0 and Z1 clock support
dt-bindings: clock: renesas,rzg2l: Simplify header file references
clk: renesas: rza1: Remove struct rz_cpg
clk: renesas: r8a7779: Remove struct r8a7779_cpg
clk: renesas: r8a7778: Remove struct r8a7778_cpg
clk: renesas: sh73a0: Remove sh73a0_cpg.reg
clk: renesas: r8a7740: Remove r8a7740_cpg.reg
clk: renesas: r8a73a4: Remove r8a73a4_cpg.reg
clk: renesas: r8a779f0: Add SDHI0 clock
clk: renesas: r8a779f0: Add thermal clock
clk: renesas: rzg2l: Fix reset status function
clk: renesas: r9a06g032: Fix UART clkgrp bitsel
clk: renesas: r9a06g032: Drop some unused fields
clk: renesas: r9a09g011: Add WDT clock and reset entries
clk: renesas: r9a09g011: Add PFC clock and reset entries
...
* clk-spreadtrum:
clk: sprd: Add dt-bindings include file for UMS512
dt-bindings: clk: sprd: Add bindings for ums512 clock controller
* clk-imx:
clk: imx: clk-fracn-gppll: Add more freq config for video pll
clk: imx: clk-fracn-gppll: correct rdiv
clk: imx: clk-fracn-gppll: Return rate in rate table properly in ->recalc_rate()
clk: imx: clk-fracn-gppll: fix mfd value
clk: imx93: Correct the edma1's parent clock
clk: imx93: correct nic_media parent
clk: imx93: use adc_root as the parent clock of adc1
* clk-qcom: (62 commits)
clk: qcom: gcc-msm8994: use parent_hws for gpll0/4
clk: qcom: clk-rpm: convert to parent_data API
dt-bindings: clock: fix wrong clock documentation for qcom,rpmcc
clk: qcom: gcc-msm8939: Add missing USB HS system clock frequencies
clk: qcom: gcc-msm8939: Add missing MDSS MDP clock frequencies
clk: qcom: gcc-msm8939: Add missing CAMSS CPP clock frequencies
clk: qcom: gcc-msm8939: Fix venus0_vcodec0_clk frequency definitions
clk: qcom: gcc-msm8939: Add missing CAMSS CCI bus clock
clk: qcom: gcc-msm8939: Fix weird field spacing in ftbl_gcc_camss_cci_clk
clk: qcom: gdsc: Bump parent usage count when GDSC is found enabled
clk: qcom: Drop mmcx gdsc supply for dispcc and videocc
clk: qcom: fix build error initializer element is not constant
dt-bindings: clock: qcom,gcc-msm8996: add more GCC clock sources
clk: qcom: add support for SM8350 DISPCC
clk: qcom: add support for SM8350 GPUCC
clk: qcom: add camera clock controller driver for SM8450 SoC
clk: qcom: clk-alpha-pll: add Rivian EVO PLL configuration interfaces
clk: qcom: clk-alpha-pll: add Lucid EVO PLL configuration interfaces
clk: qcom: clk-alpha-pll: limit exported symbols to GPL licensed code
clk: qcom: clk-alpha-pll: fix clk_trion_pll_configure description
...
|
|
into clk-next
- Remove allwinner workaround logic/compatible in fixed factor code
- MediaTek clk driver cleanups
- Add reset support to more MediaTek clk drivers
- devm helpers for clk_get() + clk_prepare() and clk_enable()
* clk-basic:
clk: fixed-factor: Introduce *clk_hw_register_fixed_factor_parent_hw()
clk: mux: Introduce devm_clk_hw_register_mux_parent_hws()
clk: divider: Introduce devm_clk_hw_register_divider_parent_hw()
dt-bindings: clock: fixed-factor: Drop Allwinner A10 compatible
clk: fixed: Remove Allwinner A10 special-case logic
* clk-mtk:
clk: mediatek: reset: Add infra_ao reset support for MT8186
dt-bindings: arm: mediatek: Add #reset-cells property for MT8186
dt-bindings: reset: mediatek: Add infra_ao reset index for MT8186
clk: mediatek: reset: Add infra_ao reset support for MT8192/MT8195
dt-bindings: reset: mediatek: Add infra_ao reset index for MT8192/MT8195
dt-bindings: arm: mediatek: Add #reset-cells property for MT8192/MT8195
clk: mediatek: reset: Add reset support for simple probe
clk: mediatek: reset: Add new register reset function with device
clk: mediatek: reset: Change return type for clock reset register function
clk: mediatek: reset: Support inuput argument index mode
clk: mediatek: reset: Support nonsequence base offsets of reset registers
clk: mediatek: reset: Revise structure to control reset register
clk: mediatek: reset: Merge and revise reset register function
clk: mediatek: reset: Extract common drivers to update function
clk: mediatek: reset: Refine and reorder functions in reset.c
clk: mediatek: reset: Fix written reset bit offset
clk: mediatek: reset: Add reset.h
clk: mediatek: Delete MT8192 msdc gate
dt-bindings: ARM: Mediatek: Remove msdc binding of MT8192 clock
* clk-devm-enable:
clk: Remove never used devm_clk_*unregister()
clk: Fix pointer casting to prevent oops in devm_clk_release()
clk: meson: axg-audio: Don't duplicate devm_clk_get_enabled()
clk: Provide new devm_clk helpers for prepared and enabled clocks
clk: generalize devm_clk_get() a bit
clk: Improve documentation for devm_clk_get() and its optional variant
* clk-ti-dt:
clk: ti: Stop using legacy clkctrl names for omap4 and 5
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These start a rework of the handling of trip points in the thermal
core, improve the cpufreq/devfreq cooling device handling, update some
thermal control drivers and the tmon utility and clean up code.
Specifics:
- Consolidate the thermal core code by beginning to move the thermal
trip structure from the thermal OF code as a generic structure to
be used by the different sensors when registering a thermal zone
(Daniel Lezcano).
- Make per cpufreq / devfreq cooling device ops instead of using a
global variable, fix comments and rework the trace information
(Lukasz Luba).
- Add the include/dt-bindings/thermal.h under the area covered by the
thermal maintainer in the MAINTAINERS file (Lukas Bulwahn).
- Improve the error output by giving the sensor identification when a
thermal zone failed to initialize, the DT bindings by changing the
positive logic and adding the r8a779f0 support on the rcar3
(Wolfram Sang).
- Convert the QCom tsens DT binding to the dtsformat format
(Krzysztof Kozlowski).
- Remove the pointless get_trend() function in the QCom, Ux500 and
tegra thermal drivers, along with the unused DROP_FULL and
RAISE_FULL trends definitions. Simplify the code by using clamp()
macros (Daniel Lezcano).
- Fix ref_table memory leak at probe time on the k3_j72xx bandgap
(Bryan Brattlof).
- Fix array underflow in prep_lookup_table (Dan Carpenter).
- Add static annotation to the k3_j72xx_bandgap_j7* data structure
(Jin Xiaoyun).
- Fix typos in comments detected on sun8i by Coccinelle (Julia
Lawall).
- Fix typos in comments on rzg2l (Biju Das).
- Remove as unnecessary call to dev_err() as the error is already
printed by the failing function on u8500 (Yang Li).
- Register the thermal zones as hwmon sensors for the Qcom thermal
sensors (Dmitry Baryshkov).
- Fix 'tmon' tool compilation issue by adding phtread.h include
(Markus Mayer).
- Fix typo in the comments for the 'tmon' tool (Slark Xiao).
- Make the thermal core use ida_alloc()/free() directly instead of
ida_simple_get()/ida_simple_remove() that have been deprecated
(keliu).
- Drop ACPI_FADT_LOW_POWER_S0 check from the Intel PCH thermal
control driver (Rafael Wysocki)"
* tag 'thermal-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
thermal/of: Initialize trip points separately
thermal/of: Use thermal trips stored in the thermal zone
thermal/core: Add thermal_trip in thermal_zone
thermal/core: Rename 'trips' to 'num_trips'
thermal/core: Move thermal_set_delay_jiffies to static
thermal/core: Remove unneeded EXPORT_SYMBOLS
thermal/of: Move thermal_trip structure to thermal.h
thermal/of: Remove the device node pointer for thermal_trip
thermal/of: Replace device node match with device node search
thermal/core: Remove duplicate information when an error occurs
thermal/core: Avoid calling ->get_trip_temp() unnecessarily
thermal/tools/tmon: Fix typo 'the the' in comment
thermal/tools/tmon: Include pthread and time headers in tmon.h
thermal/ti-soc-thermal: Fix comment typo
thermal/drivers/qcom/spmi-adc-tm5: Register thermal zones as hwmon sensors
thermal/drivers/qcom/temp-alarm: Register thermal zones as hwmon sensors
thermal/drivers/u8500: Remove unnecessary print function dev_err()
thermal/drivers/rzg2l: Fix comments
thermal/drivers/sun8i: Fix typo in comment
thermal/drivers/k3_j72xx_bandgap: Make k3_j72xx_bandgap_j721e_data and k3_j72xx_bandgap_j7200_data static
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly minor improvements all over including new CPU IDs for
the Intel RAPL driver, an Energy Model rework to use micro-Watt as the
power unit, cpufreq fixes and cleanus, cpuidle updates, devfreq
updates, documentation cleanups and a new version of the pm-graph
suite of utilities.
Specifics:
- Make cpufreq_show_cpus() more straightforward (Viresh Kumar).
- Drop unnecessary CPU hotplug locking from store() used by cpufreq
sysfs attributes (Viresh Kumar).
- Make the ACPI cpufreq driver support the boost control interface on
Zhaoxin/Centaur processors (Tony W Wang-oc).
- Print a warning message on attempts to free an active cpufreq
policy which should never happen (Viresh Kumar).
- Fix grammar in the Kconfig help text for the loongson2 cpufreq
driver (Randy Dunlap).
- Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq
governor (Zhao Liu).
- Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll
cpuidle driver (Eiichi Tsukata).
- Modify intel_idle to treat C1 and C1E as independent idle states on
Sapphire Rapids (Artem Bityutskiy).
- Extend support for wakeirq to callback wrappers used during system
suspend and resume (Ulf Hansson).
- Defer waiting for device probe before loading a hibernation image
till the first actual device access to avoid possible deadlocks
reported by syzbot (Tetsuo Handa).
- Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn
Helgaas).
- Add Raptor Lake-P to the list of processors supported by the Intel
RAPL driver (George D Sworo).
- Add Alder Lake-N and Raptor Lake-P to the list of processors for
which Power Limit4 is supported in the Intel RAPL driver (Sumeet
Pawnikar).
- Make pm_genpd_remove() check genpd_debugfs_dir against NULL before
attempting to remove it (Hsin-Yi Wang).
- Change the Energy Model code to represent power in micro-Watts and
adjust its users accordingly (Lukasz Luba).
- Add new devfreq driver for Mediatek CCI (Cache Coherent
Interconnect) (Johnson Wang).
- Convert the Samsung Exynos SoC Bus bindings to DT schema of
exynos-bus.c (Krzysztof Kozlowski).
- Address kernel-doc warnings by adding the description for unused
function parameters in devfreq core (Mauro Carvalho Chehab).
- Use NULL to pass a null pointer rather than zero according to the
function propotype in imx-bus.c (Colin Ian King).
- Print error message instead of error interger value in
tegra30-devfreq.c (Dmitry Osipenko).
- Add checks to prevent setting negative frequency QoS limits for
CPUs (Shivnandan Kumar).
- Update the pm-graph suite of utilities to the latest revision 5.9
including multiple improvements (Todd Brandt).
- Drop pme_interrupt reference from the PCI power management
documentation (Mario Limonciello)"
* tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P
PM: QoS: Add check to make sure CPU freq is non-negative
PM: hibernate: defer device probing when resuming from hibernation
intel_idle: make SPR C1 and C1E be independent
cpufreq: ondemand: Use cpumask_var_t for on-stack cpu mask
cpufreq: loongson2: fix Kconfig "its" grammar
pm-graph v5.9
cpufreq: Warn users while freeing active policy
cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1
firmware: arm_scmi: Get detailed power scale from perf
Documentation: EM: Switch to micro-Watts scale
PM: EM: convert power field to micro-Watts precision and align drivers
PM / devfreq: tegra30: Add error message for devm_devfreq_add_device()
PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero
PM / devfreq: shut up kernel-doc warnings
dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema
PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver
dt-bindings: interconnect: Add MediaTek CCI dt-bindings
PM: domains: Ensure genpd_debugfs_dir exists before remove
PM: runtime: Extend support for wakeirq for force_suspend|resume
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These rework the handling of ACPI device objects to use the driver
core facilities for managing child ones instead of some questionable
home-grown ways without the requisite locking and reference counting,
clean up the EC driver, improve suspend-to-idle handling on x86, add
some systems to the ACPI backlight quirk list, fix some assorted
issues, clean up code and improve documentation.
Specifics:
- Use facilities provided by the driver core and some additional
helpers to handle the children of a given ACPI device object in
multiple places instead of using the children and node list heads
in struct acpi_device which is error prone (Rafael Wysocki).
- Fix ACPI-related device reference counting issue in the hisi_lpc
bus driver (Yang Yingliang).
- Drop the children and node list heads that are not needed any more
from struct acpi_device (Rafael Wysocki).
- Drop driver member from struct acpi_device (Uwe Kleine-König).
- Drop redundant check from acpi_device_remove() (Uwe Kleine-König).
- Prepare the CPPC library for handling backwards-compatible future
_CPC return package formats gracefully (Rafael Wysocki).
- Clean up the ACPI EC driver after previous changes in it (Hans de
Goede).
- Drop leftover acpi_processor_get_limit_info() declaration (Riwen
Lu).
- Split out thermal initialization from ACPI PSS (Riwen Lu).
- Annotate more functions in the ACPI CPU idle driver to live in the
cpuidle section (Guilherme G. Piccoli).
- Fix _EINJ vs "special purpose" EFI memory regions (Dan Williams).
- Implement a better fix to avoid spamming the console with old error
logs (Tony Luck).
- Fix typo in a comment in the APEI code (Xiang wangx).
- Save NVS memory during transitions into S3 on Lenovo G40-45 (Manyi
Li).
- Add support for upcoming AMD uPEP device ID AMDI008 to the ACPI
suspend-to-idle driver for x86 platforms (Shyam Sundar S K).
- Clean up checks related to the ACPI_FADT_LOW_POWER_S0 platform flag
in the LPIT table driver and the suspend-to-idle driver for x86
platforms (Rafael Wysocki).
- Print information messages regarding declared LPS0 idle support in
the platform firmware (Rafael Wysocki).
- Fix missing check in register_device_clock() in the ACPI driver for
Intel SoCs (huhai).
- Fix ACS setup in the VIOT table parser (Eric Auger).
- Skip IRQ override on AMD Zen platforms where it's harmful
(Chuanhong Guo).
- Use native backlight on Dell Inspiron N4010 (Hans de Goede).
- Use native backlight on some TongFang devices (Werner Sembach).
- Drop X86 dependency from the ACPI backlight driver Kconfig (Riwen
Lu).
- Shorten the quirk list in the ACPI backlight driver by identifying
Clevo by board_name only (Werner Sembach).
- Remove useless NULL pointer checks from 2 ACPI PCI link management
functions (Andrey Strachuk).
- Fix obsolete example in the ACPI EINJ documentation (Qifu Zhang).
- Update links and references to _DSD-related documents (Sudeep
Holla)"
* tag 'acpi-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (46 commits)
ACPI/PCI: Remove useless NULL pointer checks
ACPI: CPPC: Do not prevent CPPC from working in the future
ACPI: PM: x86: Print messages regarding LPS0 idle support
ACPI: resource: skip IRQ override on AMD Zen platforms
Documentation: ACPI: EINJ: Fix obsolete example
ACPI: video: Use native backlight on Dell Inspiron N4010
ACPI: PM: s2idle: Use LPS0 idle if ACPI_FADT_LOW_POWER_S0 is unset
Revert "ACPI / PM: LPIT: Register sysfs attributes based on FADT"
ACPI: video: Shortening quirk list by identifying Clevo by board_name only
ACPI: video: Force backlight native for some TongFang devices
ACPI: PM: s2idle: Add support for upcoming AMD uPEP HID AMDI008
ACPI: VIOT: Fix ACS setup
ACPI: bus: Drop unused list heads from struct acpi_device
hisi_lpc: Use acpi_dev_for_each_child()
bus: hisi_lpc: fix missing platform_device_put() in hisi_lpc_acpi_probe()
ACPI: bus: Drop driver member of struct acpi_device
ACPI: bus: Drop redundant check in acpi_device_remove()
ACPI: APEI: Fix _EINJ vs EFI_MEMORY_SP
ACPI: LPSS: Fix missing check in register_device_clock()
ACPI: APEI: Better fix to avoid spamming the console with old error logs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
- Substantial rewrite of lm90 driver to support several additional
chips and improve support for existing chips.
- Add support of ROG ZENITH II EXTREME, Maximus XI Hero, and
Strix Z690-a D4 to asus-ec-sensors driver
- Add support of F71858AD to f71882fg driver
- Add support of Aquacomputer Quadro to aquacomputer_d5next driver
- Improved assembler code and add support for Dell G5 5590 as well as
XPS 13 7390 in dell-smm driver
- Add support for ASUS TUF GAMING B550-PLUS WIFI II to nct775 driver
- Add support for IEEE 754 half precision to PMBus core. Also support
for Analog Devices LT7182S, improve regulator support, and report
various MFR register values in debugfs.
- Various other minor improvements and fixes
* tag 'hwmon-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (85 commits)
hwmon: (aquacomputer_d5next) Add support for Aquacomputer Quadro fan controller
hwmon: (dell-smm) Improve documentation
hwmon: (nct6775) add ASUS TUF GAMING B550-PLUS WIFI II
hwmon: (occ) Replace open-coded variant of %*phN specifier
hwmon: (sht15) Fix wrong assumptions in device remove callback
hwmon: (aquacomputer_d5next) Add support for reading the +12V voltage sensor on D5 Next
hwmon: (tps23861) fix byte order in current and voltage registers
hwmon: (aspeed-pwm-tacho) increase fan tach period (again)
hwmon: (aquacomputer_d5next) Add D5 Next fan control support
hwmon: (mcp3021) improve driver support for newer hwmon interface
hwmon: (asus-ec-sensors) add definitions for ROG ZENITH II EXTREME
hwmon: (aquacomputer_d5next) Move device-specific data into struct aqc_data
hwmon: (asus-ec-sensors) add missing sensors for X570-I GAMING
hwmon: (drivetemp) Add module alias
hwmon: (asus_wmi_sensors) Save a few bytes of memory
hwmon: (lm90) Use worker for alarm notifications
hwmon: (asus-ec-sensors) add support for Maximus XI Hero
hwmon: (dell-smm) Improve assembly code
hwmon: (pmbus/ltc2978) Set voltage resolution
hwmon: (pmbus) Add list_voltage to pmbus ops
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"After v5.19 had all drivers converted to the new atomic API and nobody
has reported any breakage, this set of changes starts by dropping the
legacy support.
Some existing drivers get improvements and broader chip support and a
new driver is added that emulates a PWM controller using a clock
output.
Other than that there's the usual bits of cleanups and minor fixes"
* tag 'pwm/for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (21 commits)
pwm: lpc18xx: Fix period handling
pwm: lpc18xx: Convert to use dev_err_probe()
pwm: twl-led: Document some limitations and link to the reference manual
MAINTAINERS: Remove myself as PWM maintainer
MAINTAINERS: Add include/dt-bindings/pwm to PWM SUBSYSTEM
dt-bindings: pwm: mediatek: Add compatible string for MT8195
pwm: Add clock based PWM output driver
dt-bindings: pwm: Document clk based PWM controller
pwm: sifive: Shut down hardware only after pwmchip_remove() completed
pwm: sifive: Ensure the clk is enabled exactly once per running PWM
pwm: sifive: Simplify clk handling
pwm: sifive: Enable clk only after period check in .apply()
pwm: sifive: Reduce time the controller lock is held
pwm: sifive: Fold pwm_sifive_enable() into its only caller
pwm: sifive: Simplify offset calculation for PWMCMP registers
pwm: mediatek: Add MT8365 support
dt-bindings: pwm: Add MT8365 SoC binding
pwm: Drop unused forward declaration from pwm.h
pwm: Reorder header file to get rid of struct pwm_capture forward declaration
pwm: atmel-tcb: Fix typo in comment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The big update this time around is some excellent work from David
Jander who went through the fast path and really eliminated overheads,
meaning that we are seeing a huge reduction in the time spent between
transfers for single threaded clients.
Benchmarking has been coming out at about a halving of overhead which
is clearly visible in system level usage that stresses SPI like some
CAN and IIO applications, especially with small transfers. Thanks to
David for taking the time to drill down into this and push the work
upstream.
Otherwise there's been a bunch of new device support and the usual
updates.
- Optimisation of the fast path, particularly around the number and
types of locking operations, from David Jander.
- Support for Arbel NPCM845, HP GXP, Intel Meteor Lake and Thunder
Bay, MediaTek MT8188 and MT8365, Microchip FPGAs, nVidia Tegra 241
and Samsung Exynos Auto v9 and 4210"
* tag 'spi-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (97 commits)
MAINTAINERS: add spi support to GXP
spi: dt-bindings: add documentation for hpe,gxp-spifi
spi: spi-gxp: Add support for HPE GXP SoCs
spi: a3700: support BE for AC5 SPI driver
spi/panel: dt-bindings: drop CPHA and CPOL from common properties
spi: bcm2835: enable shared interrupt support
spi: dt-bindings: spi-controller: correct example indentation
spi: dt-bindings: qcom,spi-geni-qcom: allow three interconnects
spi: npcm-fiu: Add NPCM8XX support
dt-binding: spi: Add npcm845 compatible to npcm-fiu document
spi: npcm-fiu: Modify direct read dummy configuration
spi: atmel: remove #ifdef CONFIG_{PM, SLEEP}
spi: dt-bindings: Add compatible for MediaTek MT8188
spi: dt-bindings: mediatek,spi-mtk-nor: Update bindings for nor flash
spi: dt-bindings: atmel,at91rm9200-spi: convert to json-schema
spi: tegra20-slink: fix UAF in tegra_slink_remove()
spi: Fix simplification of devm_spi_register_controller
spi: microchip-core: switch to use dev_err_probe()
spi: microchip-core: switch to use devm_spi_alloc_master()
spi: microchip-core: fix UAF in mchp_corespi_remove()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This has been a fairly quiet release for the regulator API, a few new
drivers and a small API update:
- Support for specifying an initial load as part of requesting
regulators through the bulk API
- Support for Maxim MAX597x, Qualcomm PM8074, PM8909 and Realtek
RT5120 devices"
* tag 'regulator-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (35 commits)
regulator: core: Allow drivers to define their init data as const
regulator: core: Allow specifying an initial load w/ the bulk API
regulator: mt6380: Fix unused array warning
regulator: Add missing type for 'regulator-microvolt-offset'
regulator: core: Fix off-on-delay-us for always-on/boot-on regulators
regulator: of: Fix refcount leak bug in of_get_regulation_constraints()
regulator: pwm: Update Lee Jones' email address
regulator: max597x: Don't return uninitialized variable in .probe
regulator: qcom,spmi-regulator: add PMP8074 PMIC
regulator: qcom,spmi-regulator: Convert to dtschema
regulator: qcom_spmi: add support for PMP8074 regulators
regulator: qcom_spmi: add support for HT_P600
regulator: qcom_spmi: add support for HT_P150
regulator: max597x: Remove unused including <linux/version.h>
regulator: Fix MFD_MAX597X dependency
regulator: Fix parameter declaration and spelling mistake.
regulator: max597x: Add support for max597x regulator
regulator: scmi: Add missing of_node_get()
regulator: qcom_smd: Add PM8909 RPM regulators
regulator: dt-bindings: qcom,smd-rpm: Add PM8909
...
|
|
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220727164148.385476-1-krzysztof.kozlowski@linaro.org
|
|
Id and schema fields do not need quotes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220726115748.101015-3-krzysztof.kozlowski@linaro.org
|
|
string literals do not need quotes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220726115748.101015-2-krzysztof.kozlowski@linaro.org
|
|
Id and schema fields do not need quotes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220726115748.101015-1-krzysztof.kozlowski@linaro.org
|
|
The nobh mode is an obscure feature to save lowlevel for large memory
32-bit configurations while trading for much slower performance and
has been long obsolete. Remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Provide a folio-based replacement for aops->migratepage. Update the
documentation to document migrate_folio instead of migratepage.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
These drivers are rather uncomfortably hammered into the
address_space_operations hole. They aren't filesystems and don't behave
like filesystems. They just need their own movable_operations structure,
which we can point to directly from page->mapping.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM new SoC support from Arnd Bergmann:
"This adds initial support for two SoC families that have been under
review for a while. In both cases, the origonal idea was to have a
minimally functional version, but we ended up leaving out the clk
drivers that are still under review and will be merged through the
corresponding subsystem tree.
The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and
based on the 32-bit NPCM7xx family but is now getting added to
arch/arm64 as well.
Sunplus SP7021, also known as Plus1, is a general-purpose
System-in-Package design based on the 32-bit Cortex-A7 SoC on the main
chip, plus an I/O chip and memory in the same"
* tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
MAINTAINERS: rectify entry for ARM/NUVOTON NPCM ARCHITECTURE
arm64: defconfig: Add Nuvoton NPCM family support
arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
arm64: dts: nuvoton: Add initial NPCM8XX device tree
arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
dt-bindings: arm: npcm: Add maintainer
reset: npcm: Add NPCM8XX support
dt-bindings: reset: npcm: Add support for NPCM8XX
reset: npcm: using syscon instead of device data
ARM: dts: nuvoton: add reset syscon property
dt-bindings: reset: npcm: add GCR syscon property
dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
dt-bindings: watchdog: npcm: Add npcm845 compatible string
dt-bindings: timer: npcm: Add npcm845 compatible string
ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree
ARM: sp7021_defconfig: Add Sunplus SP7021 defconfig
ARM: sunplus: Add initial support for Sunplus SP7021 SoC
irqchip: Add Sunplus SP7021 interrupt controller driver
...
|
|
Pull ARM DT updates from Arnd Bergmann:
"As usual, the bulk of the changes for the SoC tree are devicetree file
updates, and most of these changes are for 64-bit embedded machines.
As before, there are a ton of style cleanups, and additional hardware
support for existing machines.
Looking only at the new SoC, the notable additions are:
- A whole family of Broadcom broadband SoCs, both 32-bit and 64-bit:
BCM63178, BCM63158, BCM4912, BCM6858, BCM6878, BCM6846, BCM63146,
BCM6856, BCM6855, BCM6756, BCM63148, and BCM6813. Each SoC comes
with a corresponding reference board.
- The new NXP i.MX93 SoC, the follow-up to the popular i.MX6 and
i.MX8 embedded SoCs, now using Cortex-A55 cores and the Ethos-U65
NPU.
- Qualcomm Snapdragon 8cx Gen3 (SC8280XP), the current high end of
Arm based Laptop SoCs, and its automotive cousin, the SA8540P. The
SC8280XP is used in the Lenovo Thinkpad X13s laptop that also gets
added here in addition to the reference boards.
- Allwinner H616, a newer version of the H6 SoC, targeted at
Set-top-box applications. It comes with dts files for the Orange Pi
zero2 single-board computer and the X96 Mate set-top-box
- Marvell Prestera 98DX2530 (AlleyCat5), a network switch chip in the
Armada SoC family based on the Cortex-A55 core.
New machines based on previously supported SoCs include:
- Several new machines on NXP i.MX platforms: multiple Toradex
Colibri boards using the "Iris" and "Ixora" carriers, DH
electronics i.MX8M Plus DHCOM and PDK2, TQ-Systems TQMa8MPQL, and
phytech phyBOARD-Polis-i.MX8MM.
- Google Chameleon v3 FPGA board based on Intel Arria10 and Stratix
10 Software Virtual platform, both in the SoCFPGA platform.
- Two new wireless devices based on Broadcom SoCs: The Asus GT-AX6000
Router and the Cisco Meraki MR26 access point
- Improved Chromebook support for both the Mediatek and Qualcomm SoC
families brought added machines: Acer Chromebook 514 (MT8192), Acer
Chromebook Spin 513 (MT8195) and a couple of SC7180 based machines
including the Lenovo IdeaPad Chromebook Duet 3.
- Xiaomi Mi Mix2s, LG G7 and LG V35 are mobile phones based on
Qualcomm SDM845, while Mi 5s Plus is based on MSM8996.
- Finally, there are a few development board on other chips: PCB8309
(Microchip lan966x), Radxa Rock Pi S (Rockchips RK3308) DH DRC
Compact (ST STM32MP1) and Inforce IFC6560 (Qualcomm SDM660)"
* tag 'arm-dt-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (829 commits)
dt-bindings: soc: bcm: use absolute path to other schema
dt-bindings: soc: bcm: drop quotes when not needed
dt-bindings: soc: microchip: use absolute path to other schema
dt-bindings: soc: microchip: drop quotes when not needed
ARM: dts: lan966x: keep lan966 entries alphabetically sorted
ARM: dts: lan966x: add support for pcb8309
dt-bindings: arm: at91: add lan966 pcb8309 board
ARM: dts: lan966x: Enable network driver on pcb8291
ARM: dts: lan966x: Disable can0 on pcb8291
ARM: dts: lan966x: Add gpio-restart
dt-bindings: arm: aspeed: add Aspeed Evaluation boards
arm64: dts: qcom: Add support for Xiaomi Mi Mix2s
dt-bindings: arm: qcom: Add Xiaomi Mi Mix2s bindings
dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices
dt-bindings: arm: qcom: add missing SM6350 board compatibles
dt-bindings: arm: qcom: add missing SM6125 board compatibles
dt-bindings: arm: qcom: add missing SDM845 board compatibles
dt-bindings: arm: qcom: add missing SDM636 board compatibles
dt-bindings: arm: qcom: add missing SDM630 board compatibles
dt-bindings: arm: qcom: add missing QCS404 board compatibles
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC drivers from Arnd Bergmann:
"The SoC driver updates contain changes to improve support for
additional SoC variants, as well as cleanups an minor bugfixes
in a number of existing drivers.
Notable updates this time include:
- Support for Qualcomm MSM8909 (Snapdragon 210) in various drivers
- Updates for interconnect drivers on Qualcomm Snapdragon
- A new driver support for NMI interrupts on Fujitsu A64fx
- A rework of Broadcom BCMBCA Kconfig dependencies
- Improved support for BCM2711 (Raspberry Pi 4) power management to
allow the use of the V3D GPU
- Cleanups to the NXP guts driver
- Arm SCMI firmware driver updates to add tracing support, and use
the firmware interfaces for system power control and for power
capping"
* tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (125 commits)
soc: a64fx-diag: disable modular build
dt-bindings: soc: qcom: qcom,smd-rpm: add power-controller
dt-bindings: soc: qcom: aoss: document qcom,sm8450-aoss-qmp
dt-bindings: soc: qcom,rpmh-rsc: simplify qcom,tcs-config
ARM: mach-qcom: Add support for MSM8909
dt-bindings: arm: cpus: Document "qcom,msm8909-smp" enable-method
soc: qcom: spm: Add CPU data for MSM8909
dt-bindings: soc: qcom: spm: Add MSM8909 CPU compatible
soc: qcom: rpmpd: Add compatible for MSM8909
dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains
soc: qcom: smd-rpm: Add compatible for MSM8909
dt-bindings: soc: qcom: smd-rpm: Add MSM8909
soc: qcom: icc-bwmon: Remove unnecessary print function dev_err()
soc: fujitsu: Add A64FX diagnostic interrupt driver
soc: qcom: socinfo: Fix the id of SA8540P SoC
soc: qcom: Make QCOM_RPMPD depend on PM
tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/late
SoCFPGA dts updates for v5.20, part 2
- Update EMAC AXI settings for Cyclone5
* tag 'socfpga_updates_for_v5.20_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: add EMAC AXI settings for Cyclone5
arm64: dts: altera: socfpga_stratix10: move clocks out of soc node
arm64: dts: Add support for Stratix 10 Software Virtual Platform
dt-bindings: altera: document Stratix 10 SWVP compatibles
arm64: dts: altera: adjust whitespace around '='
arm64: dts: intel: socfpga_agilex: use defined GIC interrupt type for ECC
dt-bindings: altera: Add Chameleon v3 board
ARM: dts: socfpga: Add Google Chameleon v3 devicetree
ARM: dts: socfpga: Add atsha204a node to Mercury+ AA1 dts
ARM: dts: socfpga: Move sdmmc-ecc node to Arria 10 dts
ARM: dts: socfpga: Change Mercury+ AA1 dts to dtsi
Link: https://lore.kernel.org/r/20220728223237.3184243-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Reset controller updates for v5.20
Allow reset-simple to be selected under EXPERT and reset-a10sr to be
built under COMPILE_TEST. Add Renesas RZ/G2UL USBPHY binding and a new
driver for the TI TPS380x line of voltage supervisor ICs with manual
reset control.
A patch to make reset-microchip-sparx5 buildable as a module had to be
reverted as that turned out to break MDIO on kswitch-d10.
* tag 'reset-for-v5.20' of git://git.pengutronix.de/pza/linux:
reset: tps380x: Fix spelling mistake "Voltags" -> "Voltage"
reset: tps380x: Add TPS380x device driver supprt
dt-bindings: reset: Add TPS380x documentation
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G2UL USBPHY Control bindings
reset: reset-simple should depends on HAS_IOMEM
Revert "reset: microchip-sparx5: allow building as a module"
reset: a10sr: allow building under COMPILE_TEST
reset: allow building of reset simple driver if expert config selected
reset: microchip-sparx5: allow building as a module
Link: https://lore.kernel.org/r/20220729133620.488379-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Allow 'iommu-map', 'iommu-map-mask', and 'msi-parent' properties for
generic host. This fixes unevaluated property warnings on Arm Juno, AMD
Seattle, and FSL LS1028a.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220728175137.1172841-1-robh@kernel.org
|
