summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/ata/ahci-ceva.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/ata/ahci-ceva.txt')
-rw-r--r--Documentation/devicetree/bindings/ata/ahci-ceva.txt63
1 files changed, 0 insertions, 63 deletions
diff --git a/Documentation/devicetree/bindings/ata/ahci-ceva.txt b/Documentation/devicetree/bindings/ata/ahci-ceva.txt
deleted file mode 100644
index bfb6da0281ec..000000000000
--- a/Documentation/devicetree/bindings/ata/ahci-ceva.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-Binding for CEVA AHCI SATA Controller
-
-Required properties:
- - reg: Physical base address and size of the controller's register area.
- - compatible: Compatibility string. Must be 'ceva,ahci-1v84'.
- - clocks: Input clock specifier. Refer to common clock bindings.
- - interrupts: Interrupt specifier. Refer to interrupt binding.
- - ceva,p0-cominit-params: OOB timing value for COMINIT parameter for port 0.
- - ceva,p1-cominit-params: OOB timing value for COMINIT parameter for port 1.
- The fields for the above parameter must be as shown below:
- ceva,pN-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
- CINMP : COMINIT Negate Minimum Period.
- CIBGN : COMINIT Burst Gap Nominal.
- CIBGMX: COMINIT Burst Gap Maximum.
- CIBGMN: COMINIT Burst Gap Minimum.
- - ceva,p0-comwake-params: OOB timing value for COMWAKE parameter for port 0.
- - ceva,p1-comwake-params: OOB timing value for COMWAKE parameter for port 1.
- The fields for the above parameter must be as shown below:
- ceva,pN-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
- CWBGMN: COMWAKE Burst Gap Minimum.
- CWBGMX: COMWAKE Burst Gap Maximum.
- CWBGN: COMWAKE Burst Gap Nominal.
- CWNMP: COMWAKE Negate Minimum Period.
- - ceva,p0-burst-params: Burst timing value for COM parameter for port 0.
- - ceva,p1-burst-params: Burst timing value for COM parameter for port 1.
- The fields for the above parameter must be as shown below:
- ceva,pN-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
- BMX: COM Burst Maximum.
- BNM: COM Burst Nominal.
- SFD: Signal Failure Detection value.
- PTST: Partial to Slumber timer value.
- - ceva,p0-retry-params: Retry interval timing value for port 0.
- - ceva,p1-retry-params: Retry interval timing value for port 1.
- The fields for the above parameter must be as shown below:
- ceva,pN-retry-params = /bits/ 16 <RIT RCT>;
- RIT: Retry Interval Timer.
- RCT: Rate Change Timer.
-
-Optional properties:
- - ceva,broken-gen2: limit to gen1 speed instead of gen2.
- - phys: phandle for the PHY device
- - resets: phandle to the reset controller for the SATA IP
-
-Examples:
- ahci@fd0c0000 {
- compatible = "ceva,ahci-1v84";
- reg = <0xfd0c0000 0x200>;
- interrupt-parent = <&gic>;
- interrupts = <0 133 4>;
- clocks = <&clkc SATA_CLK_ID>;
- ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
- ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
- ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
- ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
-
- ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
- ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
- ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
- ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
- ceva,broken-gen2;
- phys = <&psgtr 1 PHY_TYPE_SATA 1 1>;
- resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
- };