summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/stable/sysfs-driver-mlxreg-io81
-rw-r--r--Documentation/ABI/testing/sysfs-bus-surface_aggregator-tabletsw57
-rw-r--r--Documentation/driver-api/surface_aggregator/client.rst6
-rw-r--r--MAINTAINERS16
-rw-r--r--drivers/clk/x86/Makefile4
-rw-r--r--drivers/edac/Kconfig1
-rw-r--r--drivers/edac/pnd2_edac.c62
-rw-r--r--drivers/hid/surface-hid/surface_hid_core.c38
-rw-r--r--drivers/i2c/busses/Kconfig1
-rw-r--r--drivers/i2c/busses/i2c-i801.c39
-rw-r--r--drivers/leds/simple/Kconfig6
-rw-r--r--drivers/leds/simple/Makefile1
-rw-r--r--drivers/leds/simple/simatic-ipc-leds-gpio.c105
-rw-r--r--drivers/leds/simple/simatic-ipc-leds.c80
-rw-r--r--drivers/mfd/Kconfig1
-rw-r--r--drivers/mfd/lpc_ich.c161
-rw-r--r--drivers/pinctrl/intel/pinctrl-intel.c14
-rw-r--r--drivers/platform/Kconfig5
-rw-r--r--drivers/platform/mellanox/mlxreg-io.c23
-rw-r--r--drivers/platform/mellanox/mlxreg-lc.c82
-rw-r--r--drivers/platform/olpc/olpc-ec.c2
-rw-r--r--drivers/platform/surface/Kconfig58
-rw-r--r--drivers/platform/surface/Makefile2
-rw-r--r--drivers/platform/surface/aggregator/Kconfig2
-rw-r--r--drivers/platform/surface/aggregator/Makefile2
-rw-r--r--drivers/platform/surface/aggregator/bus.c151
-rw-r--r--drivers/platform/surface/aggregator/bus.h2
-rw-r--r--drivers/platform/surface/aggregator/controller.c55
-rw-r--r--drivers/platform/surface/aggregator/controller.h2
-rw-r--r--drivers/platform/surface/aggregator/core.c2
-rw-r--r--drivers/platform/surface/aggregator/ssh_msgb.h2
-rw-r--r--drivers/platform/surface/aggregator/ssh_packet_layer.c2
-rw-r--r--drivers/platform/surface/aggregator/ssh_packet_layer.h2
-rw-r--r--drivers/platform/surface/aggregator/ssh_parser.c2
-rw-r--r--drivers/platform/surface/aggregator/ssh_parser.h2
-rw-r--r--drivers/platform/surface/aggregator/ssh_request_layer.c2
-rw-r--r--drivers/platform/surface/aggregator/ssh_request_layer.h2
-rw-r--r--drivers/platform/surface/aggregator/trace.h82
-rw-r--r--drivers/platform/surface/surface_acpi_notify.c29
-rw-r--r--drivers/platform/surface/surface_aggregator_cdev.c2
-rw-r--r--drivers/platform/surface/surface_aggregator_hub.c371
-rw-r--r--drivers/platform/surface/surface_aggregator_registry.c362
-rw-r--r--drivers/platform/surface/surface_aggregator_tabletsw.c533
-rw-r--r--drivers/platform/surface/surface_dtx.c2
-rw-r--r--drivers/platform/surface/surface_gpe.c14
-rw-r--r--drivers/platform/surface/surface_hotplug.c2
-rw-r--r--drivers/platform/surface/surface_platform_profile.c2
-rw-r--r--drivers/platform/x86/Kconfig52
-rw-r--r--drivers/platform/x86/Makefile9
-rw-r--r--drivers/platform/x86/acer-wmi.c7
-rw-r--r--drivers/platform/x86/amd/Kconfig31
-rw-r--r--drivers/platform/x86/amd/Makefile10
-rw-r--r--drivers/platform/x86/amd/hsmp.c (renamed from drivers/platform/x86/amd_hsmp.c)0
-rw-r--r--drivers/platform/x86/amd/pmc.c (renamed from drivers/platform/x86/amd-pmc.c)0
-rw-r--r--drivers/platform/x86/apple-gmux.c5
-rw-r--r--drivers/platform/x86/asus-wmi.c25
-rw-r--r--drivers/platform/x86/compal-laptop.c4
-rw-r--r--drivers/platform/x86/dell/Kconfig1
-rw-r--r--drivers/platform/x86/intel/pmt/class.c23
-rw-r--r--drivers/platform/x86/intel/pmt/telemetry.c18
-rw-r--r--drivers/platform/x86/intel/speed_select_if/isst_if_common.c39
-rw-r--r--drivers/platform/x86/intel/vsec.c130
-rw-r--r--drivers/platform/x86/intel/vsec.h11
-rw-r--r--drivers/platform/x86/mlx-platform.c491
-rw-r--r--drivers/platform/x86/p2sb.c133
-rw-r--r--drivers/platform/x86/panasonic-laptop.c28
-rw-r--r--drivers/platform/x86/pmc_atom.c19
-rw-r--r--drivers/platform/x86/serial-multi-instantiate.c69
-rw-r--r--drivers/platform/x86/simatic-ipc.c43
-rw-r--r--drivers/platform/x86/sony-laptop.c7
-rw-r--r--drivers/platform/x86/system76_acpi.c4
-rw-r--r--drivers/platform/x86/thinkpad_acpi.c168
-rw-r--r--drivers/power/supply/surface_battery.c4
-rw-r--r--drivers/power/supply/surface_charger.c4
-rw-r--r--drivers/watchdog/Kconfig1
-rw-r--r--drivers/watchdog/simatic-ipc-wdt.c15
-rw-r--r--include/linux/platform_data/x86/asus-wmi.h1
-rw-r--r--include/linux/platform_data/x86/p2sb.h28
-rw-r--r--include/linux/platform_data/x86/pmc_atom.h2
-rw-r--r--include/linux/platform_data/x86/simatic-ipc-base.h2
-rw-r--r--include/linux/surface_aggregator/controller.h149
-rw-r--r--include/linux/surface_aggregator/device.h213
-rw-r--r--include/linux/surface_aggregator/serial_hub.h75
-rw-r--r--tools/power/x86/intel-speed-select/hfi-events.c2
-rw-r--r--tools/power/x86/intel-speed-select/isst-daemon.c2
85 files changed, 3267 insertions, 1032 deletions
diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
index b312242d4f40..af0cbf143c48 100644
--- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io
+++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
@@ -1,7 +1,7 @@
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_health
Date: June 2018
KernelVersion: 4.19
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: This file shows ASIC health status. The possible values are:
0 - health failed, 2 - health OK, 3 - ASIC in booting state.
@@ -11,7 +11,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version
Date: June 2018
KernelVersion: 4.19
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: These files show with which CPLD versions have been burned
on carrier and switch boards.
@@ -20,7 +20,7 @@ Description: These files show with which CPLD versions have been burned
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/fan_dir
Date: December 2018
KernelVersion: 5.0
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: This file shows the system fans direction:
forward direction - relevant bit is set 0;
reversed direction - relevant bit is set 1.
@@ -30,7 +30,7 @@ Description: This file shows the system fans direction:
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version
Date: November 2018
KernelVersion: 5.0
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: These files show with which CPLD versions have been burned
on LED or Gearbox board.
@@ -39,7 +39,7 @@ Description: These files show with which CPLD versions have been burned
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable
Date: November 2018
KernelVersion: 5.0
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: These files enable and disable the access to the JTAG domain.
By default access to the JTAG domain is disabled.
@@ -48,7 +48,7 @@ Description: These files enable and disable the access to the JTAG domain.
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio
Date: June 2018
KernelVersion: 4.19
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: This file allows iio devices selection.
Attribute select_iio can be written with 0 or with 1. It
@@ -62,7 +62,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu1_on
/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_down
Date: June 2018
KernelVersion: 4.19
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: These files allow asserting system power cycling, switching
power supply units on and off and system's main power domain
shutdown.
@@ -89,7 +89,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_short_pb
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_reset
Date: June 2018
KernelVersion: 4.19
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: These files show the system reset cause, as following: power
auxiliary outage or power refresh, ASIC thermal shutdown, halt,
hotswap, watchdog, firmware reset, long press power button,
@@ -106,7 +106,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_system
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_voltmon_upgrade_fail
Date: November 2018
KernelVersion: 5.0
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: These files show the system reset cause, as following: ComEx
power fail, reset from ComEx, system platform reset, reset
due to voltage monitor devices upgrade failure,
@@ -119,7 +119,7 @@ Description: These files show the system reset cause, as following: ComEx
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version
Date: November 2018
KernelVersion: 5.0
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: These files show with which CPLD versions have been burned
on LED board.
@@ -133,7 +133,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd
Date: June 2019
KernelVersion: 5.3
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: These files show the system reset cause, as following:
COMEX thermal shutdown; wathchdog power off or reset was derived
by one of the next components: COMEX, switch board or by Small Form
@@ -148,7 +148,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2
Date: January 2020
KernelVersion: 5.6
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: These files show system static topology identification
like system's static I2C topology, number and type of FPGA
devices within the system and so on.
@@ -161,7 +161,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off
Date: January 2020
KernelVersion: 5.6
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: These files show the system reset causes, as following: reset
due to AC power failure, reset invoked from software by
assertion reset signal through CPLD. reset caused by signal
@@ -173,7 +173,7 @@ Description: These files show the system reset causes, as following: reset
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis
Date: January 2020
KernelVersion: 5.6
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: This file allows to retain ASIC up during PCIe root complex
reset, when attribute is set 1.
@@ -182,7 +182,7 @@ Description: This file allows to retain ASIC up during PCIe root complex
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp
Date: January 2020
KernelVersion: 5.6
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: This file allows to overwrite system VPD hardware write
protection when attribute is set 1.
@@ -191,7 +191,7 @@ Description: This file allows to overwrite system VPD hardware write
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status
Date: January 2020
KernelVersion: 5.6
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: This file exposes the configuration update status of burnable
voltage regulator devices. The status values are as following:
0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress.
@@ -201,7 +201,7 @@ Description: This file exposes the configuration update status of burnable
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version
Date: January 2020
KernelVersion: 5.6
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: This file exposes the firmware version of burnable voltage
regulator devices.
@@ -217,7 +217,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version_min
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version_min
Date: July 2020
KernelVersion: 5.9
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: These files show with which CPLD part numbers and minor
versions have been burned CPLD devices equipped on a
system.
@@ -471,7 +471,7 @@ Description: These files provide the maximum powered required for line card
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/phy_reset
Date: May 2022
KernelVersion: 5.19
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: This file allows to reset PHY 88E1548 when attribute is set 0
due to some abnormal PHY behavior.
Expected behavior:
@@ -483,7 +483,7 @@ Description: This file allows to reset PHY 88E1548 when attribute is set 0
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/mac_reset
Date: May 2022
KernelVersion: 5.19
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: This file allows to reset ASIC MT52132 when attribute is set 0
due to some abnormal ASIC behavior.
Expected behavior:
@@ -495,7 +495,7 @@ Description: This file allows to reset ASIC MT52132 when attribute is set 0
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/qsfp_pwr_good
Date: May 2022
KernelVersion: 5.19
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: This file shows QSFP ports power status. The value is set to 0
when one of any QSFP ports is plugged. The value is set to 1 when
there are no any QSFP ports are plugged.
@@ -503,3 +503,42 @@ Description: This file shows QSFP ports power status. The value is set to 0
0 - Power good, 1 - Not power good.
The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic2_health
+Date: July 2022
+KernelVersion: 5.20
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file shows 2-nd ASIC health status. The possible values are:
+ 0 - health failed, 2 - health OK, 3 - ASIC in booting state.
+
+ The file is read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_reset
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic2_reset
+Date: July 2022
+KernelVersion: 5.20
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files allow to each of ASICs by writing 1.
+
+ The files are write only.
+
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/comm_chnl_ready
+Date: July 2022
+KernelVersion: 5.20
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file is used to indicate remote end (for example BMC) that system
+ host CPU is ready for sending telemetry data to remote end.
+ For indication the file should be written 1.
+
+ The file is write only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config3
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: The file indicates COME module hardware configuration.
+ The value is pushed by hardware through GPIO pins.
+ The purpose is to expose some minor BOM changes for the same system SKU.
+
+ The file is read only.
diff --git a/Documentation/ABI/testing/sysfs-bus-surface_aggregator-tabletsw b/Documentation/ABI/testing/sysfs-bus-surface_aggregator-tabletsw
new file mode 100644
index 000000000000..74cd9d754e60
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-surface_aggregator-tabletsw
@@ -0,0 +1,57 @@
+What: /sys/bus/surface_aggregator/devices/01:0e:01:00:01/state
+Date: July 2022
+KernelVersion: 5.20
+Contact: Maximilian Luz <luzmaximilian@gmail.com>
+Description:
+ This attribute returns a string with the current type-cover
+ or device posture, as indicated by the embedded controller.
+ Currently returned posture states are:
+
+ - "disconnected": The type-cover has been disconnected.
+
+ - "closed": The type-cover has been folded closed and lies on
+ top of the display.
+
+ - "laptop": The type-cover is open and in laptop-mode, i.e.,
+ ready for normal use.
+
+ - "folded-canvas": The type-cover has been folded back
+ part-ways, but does not lie flush with the back side of the
+ device. In general, this means that the kick-stand is used
+ and extended atop of the cover.
+
+ - "folded-back": The type cover has been fully folded back and
+ lies flush with the back side of the device.
+
+ - "<unknown>": The current state is unknown to the driver, for
+ example due to newer as-of-yet unsupported hardware.
+
+ New states may be introduced with new hardware. Users therefore
+ must not rely on this list of states being exhaustive and
+ gracefully handle unknown states.
+
+What: /sys/bus/surface_aggregator/devices/01:26:01:00:01/state
+Date: July 2022
+KernelVersion: 5.20
+Contact: Maximilian Luz <luzmaximilian@gmail.com>
+Description:
+ This attribute returns a string with the current device posture, as indicated by the embedded controller. Currently
+ returned posture states are:
+
+ - "closed": The lid of the device is closed.
+
+ - "laptop": The lid of the device is opened and the device
+ operates as a normal laptop.
+
+ - "slate": The screen covers the keyboard or has been flipped
+ back and the device operates mainly based on touch input.
+
+ - "tablet": The device operates as tablet and exclusively
+ relies on touch input (or external peripherals).
+
+ - "<unknown>": The current state is unknown to the driver, for
+ example due to newer as-of-yet unsupported hardware.
+
+ New states may be introduced with new hardware. Users therefore
+ must not rely on this list of states being exhaustive and
+ gracefully handle unknown states.
diff --git a/Documentation/driver-api/surface_aggregator/client.rst b/Documentation/driver-api/surface_aggregator/client.rst
index e519d374c378..27f95abdbe99 100644
--- a/Documentation/driver-api/surface_aggregator/client.rst
+++ b/Documentation/driver-api/surface_aggregator/client.rst
@@ -17,6 +17,8 @@
.. |SSAM_DEVICE| replace:: :c:func:`SSAM_DEVICE`
.. |ssam_notifier_register| replace:: :c:func:`ssam_notifier_register`
.. |ssam_notifier_unregister| replace:: :c:func:`ssam_notifier_unregister`
+.. |ssam_device_notifier_register| replace:: :c:func:`ssam_device_notifier_register`
+.. |ssam_device_notifier_unregister| replace:: :c:func:`ssam_device_notifier_unregister`
.. |ssam_request_sync| replace:: :c:func:`ssam_request_sync`
.. |ssam_event_mask| replace:: :c:type:`enum ssam_event_mask <ssam_event_mask>`
@@ -312,7 +314,9 @@ Handling Events
To receive events from the SAM EC, an event notifier must be registered for
the desired event via |ssam_notifier_register|. The notifier must be
unregistered via |ssam_notifier_unregister| once it is not required any
-more.
+more. For |ssam_device| type clients, the |ssam_device_notifier_register| and
+|ssam_device_notifier_unregister| wrappers should be preferred as they properly
+handle hot-removal of client devices.
Event notifiers are registered by providing (at minimum) a callback to call
in case an event has been received, the registry specifying how the event
diff --git a/MAINTAINERS b/MAINTAINERS
index fb161db0e67d..b169646de59a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1007,7 +1007,7 @@ AMD PMC DRIVER
M: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
L: platform-driver-x86@vger.kernel.org
S: Maintained
-F: drivers/platform/x86/amd-pmc.*
+F: drivers/platform/x86/amd/pmc.c
AMD HSMP DRIVER
M: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
@@ -1017,7 +1017,7 @@ S: Maintained
F: Documentation/x86/amd_hsmp.rst
F: arch/x86/include/asm/amd_hsmp.h
F: arch/x86/include/uapi/asm/amd_hsmp.h
-F: drivers/platform/x86/amd_hsmp.c
+F: drivers/platform/x86/amd/hsmp.c
AMD POWERPLAY AND SWSMU
M: Evan Quan <evan.quan@amd.com>
@@ -13467,6 +13467,12 @@ F: drivers/scsi/smartpqi/smartpqi*.[ch]
F: include/linux/cciss*.h
F: include/uapi/linux/cciss*.h
+MICROSOFT SURFACE AGGREGATOR TABLET-MODE SWITCH
+M: Maximilian Luz <luzmaximilian@gmail.com>
+L: platform-driver-x86@vger.kernel.org
+S: Maintained
+F: drivers/platform/surface/surface_aggregator_tabletsw.c
+
MICROSOFT SURFACE BATTERY AND AC DRIVERS
M: Maximilian Luz <luzmaximilian@gmail.com>
L: linux-pm@vger.kernel.org
@@ -13538,6 +13544,12 @@ F: include/linux/surface_acpi_notify.h
F: include/linux/surface_aggregator/
F: include/uapi/linux/surface_aggregator/
+MICROSOFT SURFACE SYSTEM AGGREGATOR HUB DRIVER
+M: Maximilian Luz <luzmaximilian@gmail.com>
+L: platform-driver-x86@vger.kernel.org
+S: Maintained
+F: drivers/platform/surface/surface_aggregator_hub.c
+
MICROTEK X6 SCANNER
M: Oliver Neukum <oliver@neukum.org>
S: Maintained
diff --git a/drivers/clk/x86/Makefile b/drivers/clk/x86/Makefile
index 1244c4e568ff..c2088b3c4081 100644
--- a/drivers/clk/x86/Makefile
+++ b/drivers/clk/x86/Makefile
@@ -1,6 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_PMC_ATOM) += clk-pmc-atom.o
obj-$(CONFIG_X86_AMD_PLATFORM_DEVICE) += clk-fch.o
-clk-x86-lpss-y := clk-lpss-atom.o
-obj-$(CONFIG_X86_INTEL_LPSS) += clk-x86-lpss.o
+obj-$(CONFIG_X86_INTEL_LPSS) += clk-lpss-atom.o clk-pmc-atom.o
obj-$(CONFIG_CLK_LGM_CGU) += clk-cgu.o clk-cgu-pll.o clk-lgm.o
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index d3e2477948c8..17562cf1fe97 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -263,6 +263,7 @@ config EDAC_I10NM
config EDAC_PND2
tristate "Intel Pondicherry2"
depends on PCI && X86_64 && X86_MCE_INTEL
+ select P2SB if X86
help
Support for error detection and correction on the Intel
Pondicherry2 Integrated Memory Controller. This SoC IP is
diff --git a/drivers/edac/pnd2_edac.c b/drivers/edac/pnd2_edac.c
index c94ca1f790c4..a20b299f1202 100644
--- a/drivers/edac/pnd2_edac.c
+++ b/drivers/edac/pnd2_edac.c
@@ -28,6 +28,8 @@
#include <linux/bitmap.h>
#include <linux/math64.h>
#include <linux/mod_devicetable.h>
+#include <linux/platform_data/x86/p2sb.h>
+
#include <asm/cpu_device_id.h>
#include <asm/intel-family.h>
#include <asm/processor.h>
@@ -232,42 +234,14 @@ static u64 get_mem_ctrl_hub_base_addr(void)
return U64_LSHIFT(hi.base, 32) | U64_LSHIFT(lo.base, 15);
}
-static u64 get_sideband_reg_base_addr(void)
-{
- struct pci_dev *pdev;
- u32 hi, lo;
- u8 hidden;
-
- pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x19dd, NULL);
- if (pdev) {
- /* Unhide the P2SB device, if it's hidden */
- pci_read_config_byte(pdev, 0xe1, &hidden);
- if (hidden)
- pci_write_config_byte(pdev, 0xe1, 0);
-
- pci_read_config_dword(pdev, 0x10, &lo);
- pci_read_config_dword(pdev, 0x14, &hi);
- lo &= 0xfffffff0;
-
- /* Hide the P2SB device, if it was hidden before */
- if (hidden)
- pci_write_config_byte(pdev, 0xe1, hidden);
-
- pci_dev_put(pdev);
- return (U64_LSHIFT(hi, 32) | U64_LSHIFT(lo, 0));
- } else {
- return 0xfd000000;
- }
-}
-
#define DNV_MCHBAR_SIZE 0x8000
#define DNV_SB_PORT_SIZE 0x10000
static int dnv_rd_reg(int port, int off, int op, void *data, size_t sz, char *name)
{
struct pci_dev *pdev;
- char *base;
- u64 addr;
- unsigned long size;
+ void __iomem *base;
+ struct resource r;
+ int ret;
if (op == 4) {
pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x1980, NULL);
@@ -279,26 +253,30 @@ static int dnv_rd_reg(int port, int off, int op, void *data, size_t sz, char *na
} else {
/* MMIO via memory controller hub base address */
if (op == 0 && port == 0x4c) {
- addr = get_mem_ctrl_hub_base_addr();
- if (!addr)
+ memset(&r, 0, sizeof(r));
+
+ r.start = get_mem_ctrl_hub_base_addr();
+ if (!r.start)
return -ENODEV;
- size = DNV_MCHBAR_SIZE;
+ r.end = r.start + DNV_MCHBAR_SIZE - 1;
} else {
/* MMIO via sideband register base address */
- addr = get_sideband_reg_base_addr();
- if (!addr)
- return -ENODEV;
- addr += (port << 16);
- size = DNV_SB_PORT_SIZE;
+ ret = p2sb_bar(NULL, 0, &r);
+ if (ret)
+ return ret;
+
+ r.start += (port << 16);
+ r.end = r.start + DNV_SB_PORT_SIZE - 1;
}
- base = ioremap((resource_size_t)addr, size);
+ base = ioremap(r.start, resource_size(&r));
if (!base)
return -ENODEV;
if (sz == 8)
- *(u32 *)(data + 4) = *(u32 *)(base + off + 4);
- *(u32 *)data = *(u32 *)(base + off);
+ *(u64 *)data = readq(base + off);
+ else
+ *(u32 *)data = readl(base + off);
iounmap(base);
}
diff --git a/drivers/hid/surface-hid/surface_hid_core.c b/drivers/hid/surface-hid/surface_hid_core.c
index e46330b2e561..87637f813de2 100644
--- a/drivers/hid/surface-hid/surface_hid_core.c
+++ b/drivers/hid/surface-hid/surface_hid_core.c
@@ -19,12 +19,30 @@
#include "surface_hid_core.h"
+/* -- Utility functions. ---------------------------------------------------- */
+
+static bool surface_hid_is_hot_removed(struct surface_hid_device *shid)
+{
+ /*
+ * Non-ssam client devices, i.e. platform client devices, cannot be
+ * hot-removed.
+ */
+ if (!is_ssam_device(shid->dev))
+ return false;
+
+ return ssam_device_is_hot_removed(to_ssam_device(shid->dev));
+}
+
+
/* -- Device descriptor access. --------------------------------------------- */
static int surface_hid_load_hid_descriptor(struct surface_hid_device *shid)
{
int status;
+ if (surface_hid_is_hot_removed(shid))
+ return -ENODEV;
+
status = shid->ops.get_descriptor(shid, SURFACE_HID_DESC_HID,
(u8 *)&shid->hid_desc, sizeof(shid->hid_desc));
if (status)
@@ -61,6 +79,9 @@ static int surface_hid_load_device_attributes(struct surface_hid_device *shid)
{
int status;
+ if (surface_hid_is_hot_removed(shid))
+ return -ENODEV;
+
status = shid->ops.get_descriptor(shid, SURFACE_HID_DESC_ATTRS,
(u8 *)&shid->attrs, sizeof(shid->attrs));
if (status)
@@ -88,9 +109,18 @@ static int surface_hid_start(struct hid_device *hid)
static void surface_hid_stop(struct hid_device *hid)
{
struct surface_hid_device *shid = hid->driver_data;
+ bool hot_removed;
+
+ /*
+ * Communication may fail for devices that have been hot-removed. This
+ * also includes unregistration of HID events, so we need to check this
+ * here. Only if the device has not been marked as hot-removed, we can
+ * safely disable events.
+ */
+ hot_removed = surface_hid_is_hot_removed(shid);
/* Note: This call will log errors for us, so ignore them here. */
- ssam_notifier_unregister(shid->ctrl, &shid->notif);
+ __ssam_notifier_unregister(shid->ctrl, &shid->notif, !hot_removed);
}
static int surface_hid_open(struct hid_device *hid)
@@ -109,6 +139,9 @@ static int surface_hid_parse(struct hid_device *hid)
u8 *buf;
int status;
+ if (surface_hid_is_hot_removed(shid))
+ return -ENODEV;
+
buf = kzalloc(len, GFP_KERNEL);
if (!buf)
return -ENOMEM;
@@ -126,6 +159,9 @@ static int surface_hid_raw_request(struct hid_device *hid, unsigned char reportn
{
struct surface_hid_device *shid = hid->driver_data;
+ if (surface_hid_is_hot_removed(shid))
+ return -ENODEV;
+
if (rtype == HID_OUTPUT_REPORT && reqtype == HID_REQ_SET_REPORT)
return shid->ops.output_report(shid, reportnum, buf, len);
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index e95d6bc34070..7284206b278b 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -108,6 +108,7 @@ config I2C_HIX5HD2
config I2C_I801
tristate "Intel 82801 (ICH/PCH)"
depends on PCI
+ select P2SB if X86
select CHECK_SIGNATURE if X86 && DMI
select I2C_SMBUS
help
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 9e5b87e107ba..81d0da2547bd 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -112,6 +112,7 @@
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/platform_data/itco_wdt.h>
+#include <linux/platform_data/x86/p2sb.h>
#include <linux/pm_runtime.h>
#include <linux/mutex.h>
@@ -141,7 +142,6 @@
#define TCOBASE 0x050
#define TCOCTL 0x054
-#define SBREG_BAR 0x10
#define SBREG_SMBCTRL 0xc6000c
#define SBREG_SMBCTRL_DNV 0xcf000c
@@ -1485,45 +1485,24 @@ i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev,
.version = 4,
};
struct resource *res;
- unsigned int devfn;
- u64 base64_addr;
- u32 base_addr;
- u8 hidden;
+ int ret;
/*
* We must access the NO_REBOOT bit over the Primary to Sideband
- * bridge (P2SB). The BIOS prevents the P2SB device from being
- * enumerated by the PCI subsystem, so we need to unhide/hide it
- * to lookup the P2SB BAR.
+ * (P2SB) bridge.
*/
- pci_lock_rescan_remove();
-
- devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 1);
-
- /* Unhide the P2SB device, if it is hidden */
- pci_bus_read_config_byte(pci_dev->bus, devfn, 0xe1, &hidden);
- if (hidden)
- pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, 0x0);
-
- pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR, &base_addr);
- base64_addr = base_addr & 0xfffffff0;
-
- pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR + 0x4, &base_addr);
- base64_addr |= (u64)base_addr << 32;
-
- /* Hide the P2SB device, if it was hidden before */
- if (hidden)
- pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, hidden);
- pci_unlock_rescan_remove();
res = &tco_res[1];
+ ret = p2sb_bar(pci_dev->bus, 0, res);
+ if (ret)
+ return ERR_PTR(ret);
+
if (pci_dev->device == PCI_DEVICE_ID_INTEL_DNV_SMBUS)
- res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL_DNV;
+ res->start += SBREG_SMBCTRL_DNV;
else
- res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL;
+ res->start += SBREG_SMBCTRL;
res->end = res->start + 3;
- res->flags = IORESOURCE_MEM;
return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
tco_res, 2, &pldata, sizeof(pldata));
diff --git a/drivers/leds/simple/Kconfig b/drivers/leds/simple/Kconfig
index 9f6a68336659..fd2b8225d926 100644
--- a/drivers/leds/simple/Kconfig
+++ b/drivers/leds/simple/Kconfig
@@ -1,11 +1,11 @@
# SPDX-License-Identifier: GPL-2.0-only
config LEDS_SIEMENS_SIMATIC_IPC
tristate "LED driver for Siemens Simatic IPCs"
- depends on LEDS_CLASS
+ depends on LEDS_GPIO
depends on SIEMENS_SIMATIC_IPC
help
This option enables support for the LEDs of several Industrial PCs
from Siemens.
- To compile this driver as a module, choose M here: the module
- will be called simatic-ipc-leds.
+ To compile this driver as a module, choose M here: the modules
+ will be called simatic-ipc-leds and simatic-ipc-leds-gpio.
diff --git a/drivers/leds/simple/Makefile b/drivers/leds/simple/Makefile
index 8481f1e9e360..1c7ef5e1324b 100644
--- a/drivers/leds/simple/Makefile
+++ b/drivers/leds/simple/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_LEDS_SIEMENS_SIMATIC_IPC) += simatic-ipc-leds.o
+obj-$(CONFIG_LEDS_SIEMENS_SIMATIC_IPC) += simatic-ipc-leds-gpio.o
diff --git a/drivers/leds/simple/simatic-ipc-leds-gpio.c b/drivers/leds/simple/simatic-ipc-leds-gpio.c
new file mode 100644
index 000000000000..4c9e663a90ba
--- /dev/null
+++ b/drivers/leds/simple/simatic-ipc-leds-gpio.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Siemens SIMATIC IPC driver for GPIO based LEDs
+ *
+ * Copyright (c) Siemens AG, 2022
+ *
+ * Authors:
+ * Henning Schild <henning.schild@siemens.com>
+ */
+
+#include <linux/gpio/machine.h>
+#include <linux/gpio/consumer.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+static struct gpiod_lookup_table simatic_ipc_led_gpio_table = {
+ .dev_id = "leds-gpio",
+ .table = {
+ GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 51, NULL, 0, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 52, NULL, 1, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 53, NULL, 2, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 57, NULL, 3, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 58, NULL, 4, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 60, NULL, 5, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 56, NULL, 6, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 59, NULL, 7, GPIO_ACTIVE_HIGH),
+ },
+};
+
+static const struct gpio_led simatic_ipc_gpio_leds[] = {
+ { .name = "green:" LED_FUNCTION_STATUS "-3" },
+ { .name = "red:" LED_FUNCTION_STATUS "-1" },
+ { .name = "green:" LED_FUNCTION_STATUS "-1" },
+ { .name = "red:" LED_FUNCTION_STATUS "-2" },
+ { .name = "green:" LED_FUNCTION_STATUS "-2" },
+ { .name = "red:" LED_FUNCTION_STATUS "-3" },
+};
+
+static const struct gpio_led_platform_data simatic_ipc_gpio_leds_pdata = {
+ .num_leds = ARRAY_SIZE(simatic_ipc_gpio_leds),
+ .leds = simatic_ipc_gpio_leds,
+};
+
+static struct platform_device *simatic_leds_pdev;
+
+static int simatic_ipc_leds_gpio_remove(struct platform_device *pdev)
+{
+ gpiod_remove_lookup_table(&simatic_ipc_led_gpio_table);
+ platform_device_unregister(simatic_leds_pdev);
+
+ return 0;
+}
+
+static int simatic_ipc_leds_gpio_probe(struct platform_device *pdev)
+{
+ struct gpio_desc *gpiod;
+ int err;
+
+ gpiod_add_lookup_table(&simatic_ipc_led_gpio_table);
+ simatic_leds_pdev = platform_device_register_resndata(NULL,
+ "leds-gpio", PLATFORM_DEVID_NONE, NULL, 0,
+ &simatic_ipc_gpio_leds_pdata,
+ sizeof(simatic_ipc_gpio_leds_pdata));
+ if (IS_ERR(simatic_leds_pdev)) {
+ err = PTR_ERR(simatic_leds_pdev);
+ goto out;
+ }
+
+ /* PM_BIOS_BOOT_N */
+ gpiod = gpiod_get_index(&simatic_leds_pdev->dev, NULL, 6, GPIOD_OUT_LOW);
+ if (IS_ERR(gpiod)) {
+ err = PTR_ERR(gpiod);
+ goto out;
+ }
+ gpiod_put(gpiod);
+
+ /* PM_WDT_OUT */
+ gpiod = gpiod_get_index(&simatic_leds_pdev->dev, NULL, 7, GPIOD_OUT_LOW);
+ if (IS_ERR(gpiod)) {
+ err = PTR_ERR(gpiod);
+ goto out;
+ }
+ gpiod_put(gpiod);
+
+ return 0;
+out:
+ simatic_ipc_leds_gpio_remove(pdev);
+
+ return err;
+}
+
+static struct platform_driver simatic_ipc_led_gpio_driver = {
+ .probe = simatic_ipc_leds_gpio_probe,
+ .remove = simatic_ipc_leds_gpio_remove,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ }
+};
+module_platform_driver(simatic_ipc_led_gpio_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" KBUILD_MODNAME);
+MODULE_SOFTDEP("pre: platform:leds-gpio");
+MODULE_AUTHOR("Henning Schild <henning.schild@siemens.com>");
diff --git a/drivers/leds/simple/simatic-ipc-leds.c b/drivers/leds/simple/simatic-ipc-leds.c
index 078d43f5ba38..4894c228c165 100644
--- a/drivers/leds/simple/simatic-ipc-leds.c
+++ b/drivers/leds/simple/simatic-ipc-leds.c
@@ -23,7 +23,7 @@
#define SIMATIC_IPC_LED_PORT_BASE 0x404E
struct simatic_ipc_led {
- unsigned int value; /* mask for io and offset for mem */
+ unsigned int value; /* mask for io */
char *name;
struct led_classdev cdev;
};
@@ -38,21 +38,6 @@ static struct simatic_ipc_led simatic_ipc_leds_io[] = {
{ }
};
-/* the actual start will be discovered with PCI, 0 is a placeholder */
-static struct resource simatic_ipc_led_mem_res = DEFINE_RES_MEM_NAMED(0, SZ_4K, KBUILD_MODNAME);
-
-static void __iomem *simatic_ipc_led_memory;
-
-static struct simatic_ipc_led simatic_ipc_leds_mem[] = {
- {0x500 + 0x1A0, "red:" LED_FUNCTION_STATUS "-1"},
- {0x500 + 0x1A8, "green:" LED_FUNCTION_STATUS "-1"},
- {0x500 + 0x1C8, "red:" LED_FUNCTION_STATUS "-2"},
- {0x500 + 0x1D0, "green:" LED_FUNCTION_STATUS "-2"},
- {0x500 + 0x1E0, "red:" LED_FUNCTION_STATUS "-3"},
- {0x500 + 0x198, "green:" LED_FUNCTION_STATUS "-3"},
- { }
-};
-
static struct resource simatic_ipc_led_io_res =
DEFINE_RES_IO_NAMED(SIMATIC_IPC_LED_PORT_BASE, SZ_2, KBUILD_MODNAME);
@@ -88,28 +73,6 @@ static enum led_brightness simatic_ipc_led_get_io(struct led_classdev *led_cd)
return inw(SIMATIC_IPC_LED_PORT_BASE) & led->value ? LED_OFF : led_cd->max_brightness;
}
-static void simatic_ipc_led_set_mem(struct led_classdev *led_cd,
- enum led_brightness brightness)
-{
- struct simatic_ipc_led *led = cdev_to_led(led_cd);
- void __iomem *reg = simatic_ipc_led_memory + led->value;
- u32 val;
-
- val = readl(reg);
- val = (val & ~1) | (brightness == LED_OFF);
- writel(val, reg);
-}
-
-static enum led_brightness simatic_ipc_led_get_mem(struct led_classdev *led_cd)
-{
- struct simatic_ipc_led *led = cdev_to_led(led_cd);
- void __iomem *reg = simatic_ipc_led_memory + led->value;
- u32 val;
-
- val = readl(reg);
- return (val & 1) ? LED_OFF : led_cd->max_brightness;
-}
-
static int simatic_ipc_leds_probe(struct platform_device *pdev)
{
const struct simatic_ipc_platform *plat = pdev->dev.platform_data;
@@ -117,9 +80,7 @@ static int simatic_ipc_leds_probe(struct platform_device *pdev)
struct simatic_ipc_led *ipcled;
struct led_classdev *cdev;
struct resource *res;
- void __iomem *reg;
- int err, type;
- u32 val;
+ int err;
switch (plat->devmode) {
case SIMATIC_IPC_DEVICE_227D:
@@ -134,52 +95,19 @@ static int simatic_ipc_leds_probe(struct platform_device *pdev)
}
ipcled = simatic_ipc_leds_io;
}
- type = IORESOURCE_IO;
if (!devm_request_region(dev, res->start, resource_size(res), KBUILD_MODNAME)) {
dev_err(dev, "Unable to register IO resource at %pR\n", res);
return -EBUSY;
}
break;
- case SIMATIC_IPC_DEVICE_127E:
- res = &simatic_ipc_led_mem_res;
- ipcled = simatic_ipc_leds_mem;
- type = IORESOURCE_MEM;
-
- /* get GPIO base from PCI */
- res->start = simatic_ipc_get_membase0(PCI_DEVFN(13, 0));
- if (res->start == 0)
- return -ENODEV;
-
- /* do the final address calculation */
- res->start = res->start + (0xC5 << 16);
- res->end += res->start;
-
- simatic_ipc_led_memory = devm_ioremap_resource(dev, res);
- if (IS_ERR(simatic_ipc_led_memory))
- return PTR_ERR(simatic_ipc_led_memory);
-
- /* initialize power/watchdog LED */
- reg = simatic_ipc_led_memory + 0x500 + 0x1D8; /* PM_WDT_OUT */
- val = readl(reg);
- writel(val & ~1, reg);
-
- reg = simatic_ipc_led_memory + 0x500 + 0x1C0; /* PM_BIOS_BOOT_N */
- val = readl(reg);
- writel(val | 1, reg);
- break;
default:
return -ENODEV;
}
while (ipcled->value) {
cdev = &ipcled->cdev;
- if (type == IORESOURCE_MEM) {
- cdev->brightness_set = simatic_ipc_led_set_mem;
- cdev->brightness_get = simatic_ipc_led_get_mem;
- } else {
- cdev->brightness_set = simatic_ipc_led_set_io;
- cdev->brightness_get = simatic_ipc_led_get_io;
- }
+ cdev->brightness_set = simatic_ipc_led_set_io;
+ cdev->brightness_get = simatic_ipc_led_get_io;
cdev->max_brightness = LED_ON;
cdev->name = ipcled->name;
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3b59456f5545..9566341de470 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -572,6 +572,7 @@ config LPC_ICH
tristate "Intel ICH LPC"
depends on PCI
select MFD_CORE
+ select P2SB if X86
help
The LPC bridge function of the Intel ICH provides support for
many functional units. This driver provides needed support for
diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c
index 9ffab9aafd81..650951f89f1c 100644
--- a/drivers/mfd/lpc_ich.c
+++ b/drivers/mfd/lpc_ich.c
@@ -8,7 +8,8 @@
* Configuration Registers.
*
* This driver is derived from lpc_sch.
-
+ *
+ * Copyright (c) 2017, 2021-2022 Intel Corporation
* Copyright (c) 2011 Extreme Engineering Solution, Inc.
* Author: Aaron Sierra <asierra@xes-inc.com>
*
@@ -42,9 +43,11 @@
#include <linux/errno.h>
#include <linux/acpi.h>
#include <linux/pci.h>
+#include <linux/pinctrl/pinctrl.h>
#include <linux/mfd/core.h>
#include <linux/mfd/lpc_ich.h>
#include <linux/platform_data/itco_wdt.h>
+#include <linux/platform_data/x86/p2sb.h>
#define ACPIBASE 0x40
#define ACPIBASE_GPE_OFF 0x28
@@ -71,8 +74,6 @@
#define BCR 0xdc
#define BCR_WPD BIT(0)
-#define SPIBASE_APL_SZ 4096
-
#define GPIOBASE_ICH0 0x58
#define GPIOCTRL_ICH0 0x5C
#define GPIOBASE_ICH6 0x48
@@ -143,6 +144,73 @@ static struct mfd_cell lpc_ich_gpio_cell = {
.ignore_resource_conflicts = true,
};
+#define APL_GPIO_NORTH 0
+#define APL_GPIO_NORTHWEST 1
+#define APL_GPIO_WEST 2
+#define APL_GPIO_SOUTHWEST 3
+#define APL_GPIO_NR_DEVICES 4
+
+/* Offset data for Apollo Lake GPIO controllers */
+static resource_size_t apl_gpio_offsets[APL_GPIO_NR_DEVICES] = {
+ [APL_GPIO_NORTH] = 0xc50000,
+ [APL_GPIO_NORTHWEST] = 0xc40000,
+ [APL_GPIO_WEST] = 0xc70000,
+ [APL_GPIO_SOUTHWEST] = 0xc00000,
+};
+
+#define APL_GPIO_RESOURCE_SIZE 0x1000
+
+#define APL_GPIO_IRQ 14
+
+static struct resource apl_gpio_resources[APL_GPIO_NR_DEVICES][2] = {
+ [APL_GPIO_NORTH] = {
+ DEFINE_RES_MEM(0, 0),
+ DEFINE_RES_IRQ(APL_GPIO_IRQ),
+ },
+ [APL_GPIO_NORTHWEST] = {
+ DEFINE_RES_MEM(0, 0),
+ DEFINE_RES_IRQ(APL_GPIO_IRQ),
+ },
+ [APL_GPIO_WEST] = {
+ DEFINE_RES_MEM(0, 0),
+ DEFINE_RES_IRQ(APL_GPIO_IRQ),
+ },
+ [APL_GPIO_SOUTHWEST] = {
+ DEFINE_RES_MEM(0, 0),
+ DEFINE_RES_IRQ(APL_GPIO_IRQ),
+ },
+};
+
+static const struct mfd_cell apl_gpio_devices[APL_GPIO_NR_DEVICES] = {
+ [APL_GPIO_NORTH] = {
+ .name = "apollolake-pinctrl",
+ .id = APL_GPIO_NORTH,
+ .num_resources = ARRAY_SIZE(apl_gpio_resources[APL_GPIO_NORTH]),
+ .resources = apl_gpio_resources[APL_GPIO_NORTH],
+ .ignore_resource_conflicts = true,
+ },
+ [APL_GPIO_NORTHWEST] = {
+ .name = "apollolake-pinctrl",
+ .id = APL_GPIO_NORTHWEST,
+ .num_resources = ARRAY_SIZE(apl_gpio_resources[APL_GPIO_NORTHWEST]),
+ .resources = apl_gpio_resources[APL_GPIO_NORTHWEST],
+ .ignore_resource_conflicts = true,
+ },
+ [APL_GPIO_WEST] = {
+ .name = "apollolake-pinctrl",
+ .id = APL_GPIO_WEST,
+ .num_resources = ARRAY_SIZE(apl_gpio_resources[APL_GPIO_WEST]),
+ .resources = apl_gpio_resources[APL_GPIO_WEST],
+ .ignore_resource_conflicts = true,
+ },
+ [APL_GPIO_SOUTHWEST] = {
+ .name = "apollolake-pinctrl",
+ .id = APL_GPIO_SOUTHWEST,
+ .num_resources = ARRAY_SIZE(apl_gpio_resources[APL_GPIO_SOUTHWEST]),
+ .resources = apl_gpio_resources[APL_GPIO_SOUTHWEST],
+ .ignore_resource_conflicts = true,
+ },
+};
static struct mfd_cell lpc_ich_spi_cell = {
.name = "intel-spi",
@@ -1086,6 +1154,34 @@ wdt_done:
return ret;
}
+static int lpc_ich_init_pinctrl(struct pci_dev *dev)
+{
+ struct resource base;
+ unsigned int i;
+ int ret;
+
+ /* Check, if GPIO has been exported as an ACPI device */
+ if (acpi_dev_present("INT3452", NULL, -1))
+ return -EEXIST;
+
+ ret = p2sb_bar(dev->bus, 0, &base);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < ARRAY_SIZE(apl_gpio_devices); i++) {
+ struct resource *mem = &apl_gpio_resources[i][0];
+ resource_size_t offset = apl_gpio_offsets[i];
+
+ /* Fill MEM resource */
+ mem->start = base.start + offset;
+ mem->end = base.start + offset + APL_GPIO_RESOURCE_SIZE - 1;
+ mem->flags = base.flags;
+ }
+
+ return mfd_add_devices(&dev->dev, 0, apl_gpio_devices,
+ ARRAY_SIZE(apl_gpio_devices), NULL, 0, NULL);
+}
+
static bool lpc_ich_byt_set_writeable(void __iomem *base, void *data)
{
u32 val;
@@ -1100,35 +1196,32 @@ static bool lpc_ich_byt_set_writeable(void __iomem *base, void *data)
return val & BYT_BCR_WPD;
}
-static bool lpc_ich_lpt_set_writeable(void __iomem *base, void *data)
+static bool lpc_ich_set_writeable(struct pci_bus *bus, unsigned int devfn)
{
- struct pci_dev *pdev = data;
u32 bcr;
- pci_read_config_dword(pdev, BCR, &bcr);
+ pci_bus_read_config_dword(bus, devfn, BCR, &bcr);
if (!(bcr & BCR_WPD)) {
bcr |= BCR_WPD;
- pci_write_config_dword(pdev, BCR, bcr);
- pci_read_config_dword(pdev, BCR, &bcr);
+ pci_bus_write_config_dword(bus, devfn, BCR, bcr);
+ pci_bus_read_config_dword(bus, devfn, BCR, &bcr);
}
return bcr & BCR_WPD;
}
-static bool lpc_ich_bxt_set_writeable(void __iomem *base, void *data)
+static bool lpc_ich_lpt_set_writeable(void __iomem *base, void *data)
{
- unsigned int spi = PCI_DEVFN(13, 2);
- struct pci_bus *bus = data;
- u32 bcr;
+ struct pci_dev *pdev = data;
- pci_bus_read_config_dword(bus, spi, BCR, &bcr);
- if (!(bcr & BCR_WPD)) {
- bcr |= BCR_WPD;
- pci_bus_write_config_dword(bus, spi, BCR, bcr);
- pci_bus_read_config_dword(bus, spi, BCR, &bcr);
- }
+ return lpc_ich_set_writeable(pdev->bus, pdev->devfn);
+}
- return bcr & BCR_WPD;
+static bool lpc_ich_bxt_set_writeable(void __iomem *base, void *data)
+{
+ struct pci_dev *pdev = data;
+
+ return lpc_ich_set_writeable(pdev->bus, PCI_DEVFN(13, 2));
}
static int lpc_ich_init_spi(struct pci_dev *dev)
@@ -1137,6 +1230,7 @@ static int lpc_ich_init_spi(struct pci_dev *dev)
struct resource *res = &intel_spi_res[0];
struct intel_spi_boardinfo *info;
u32 spi_base, rcba;
+ int ret;
info = devm_kzalloc(&dev->dev, sizeof(*info), GFP_KERNEL);
if (!info)
@@ -1167,30 +1261,19 @@ static int lpc_ich_init_spi(struct pci_dev *dev)
}
break;
- case INTEL_SPI_BXT: {
- unsigned int p2sb = PCI_DEVFN(13, 0);
- unsigned int spi = PCI_DEVFN(13, 2);
- struct pci_bus *bus = dev->bus;
-
+ case INTEL_SPI_BXT:
/*
* The P2SB is hidden by BIOS and we need to unhide it in
* order to read BAR of the SPI flash device. Once that is
* done we hide it again.
*/
- pci_bus_write_config_byte(bus, p2sb, 0xe1, 0x0);
- pci_bus_read_config_dword(bus, spi, PCI_BASE_ADDRESS_0,
- &spi_base);
- if (spi_base != ~0) {
- res->start = spi_base & 0xfffffff0;
- res->end = res->start + SPIBASE_APL_SZ - 1;
-
- info->set_writeable = lpc_ich_bxt_set_writeable;
- info->data = bus;
- }
+ ret = p2sb_bar(dev->bus, PCI_DEVFN(13, 2), res);
+ if (ret)
+ return ret;
- pci_bus_write_config_byte(bus, p2sb, 0xe1, 0x1);
+ info->set_writeable = lpc_ich_bxt_set_writeable;
+ info->data = dev;
break;
- }
default:
return -EINVAL;
@@ -1249,6 +1332,12 @@ static int lpc_ich_probe(struct pci_dev *dev,
cell_added = true;
}
+ if (priv->chipset == LPC_APL) {
+ ret = lpc_ich_init_pinctrl(dev);
+ if (!ret)
+ cell_added = true;
+ }
+
if (lpc_chipset_info[priv->chipset].spi_type) {
ret = lpc_ich_init_spi(dev);
if (!ret)
diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
index ffc045f7bf00..fd093e36c3a8 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -1641,16 +1641,14 @@ EXPORT_SYMBOL_GPL(intel_pinctrl_probe_by_uid);
const struct intel_pinctrl_soc_data *intel_pinctrl_get_soc_data(struct platform_device *pdev)
{
+ const struct intel_pinctrl_soc_data * const *table;
const struct intel_pinctrl_soc_data *data = NULL;
- const struct intel_pinctrl_soc_data **table;
- struct acpi_device *adev;
- unsigned int i;
- adev = ACPI_COMPANION(&pdev->dev);
- if (adev) {
- const void *match = device_get_match_data(&pdev->dev);
+ table = device_get_match_data(&pdev->dev);
+ if (table) {
+ struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+ unsigned int i;
- table = (const struct intel_pinctrl_soc_data **)match;
for (i = 0; table[i]; i++) {
if (!strcmp(adev->pnp.unique_id, table[i]->uid)) {
data = table[i];
@@ -1664,7 +1662,7 @@ const struct intel_pinctrl_soc_data *intel_pinctrl_get_soc_data(struct platform_
if (!id)
return ERR_PTR(-ENODEV);
- table = (const struct intel_pinctrl_soc_data **)id->driver_data;
+ table = (const struct intel_pinctrl_soc_data * const *)id->driver_data;
data = table[pdev->id];
}
diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig
index 18fc6a08569e..b437847b6237 100644
--- a/drivers/platform/Kconfig
+++ b/drivers/platform/Kconfig
@@ -1,7 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
-if X86
-source "drivers/platform/x86/Kconfig"
-endif
if MIPS
source "drivers/platform/mips/Kconfig"
endif
@@ -15,3 +12,5 @@ source "drivers/platform/mellanox/Kconfig"
source "drivers/platform/olpc/Kconfig"
source "drivers/platform/surface/Kconfig"
+
+source "drivers/platform/x86/Kconfig"
diff --git a/drivers/platform/mellanox/mlxreg-io.c b/drivers/platform/mellanox/mlxreg-io.c
index 2c2686d5c2fc..ddc08abf398c 100644
--- a/drivers/platform/mellanox/mlxreg-io.c
+++ b/drivers/platform/mellanox/mlxreg-io.c
@@ -31,6 +31,7 @@
* @group: sysfs attribute group;
* @groups: list of sysfs attribute group for hwmon registration;
* @regsize: size of a register value;
+ * @io_lock: user access locking;
*/
struct mlxreg_io_priv_data {
struct platform_device *pdev;
@@ -41,6 +42,7 @@ struct mlxreg_io_priv_data {
struct attribute_group group;
const struct attribute_group *groups[2];
int regsize;
+ struct mutex io_lock; /* Protects user access. */
};
static int
@@ -116,14 +118,19 @@ mlxreg_io_attr_show(struct device *dev, struct device_attribute *attr,
u32 regval = 0;
int ret;
+ mutex_lock(&priv->io_lock);
+
ret = mlxreg_io_get_reg(priv->pdata->regmap, data, 0, true,
priv->regsize, &regval);
if (ret)
goto access_error;
+ mutex_unlock(&priv->io_lock);
+
return sprintf(buf, "%u\n", regval);
access_error:
+ mutex_unlock(&priv->io_lock);
return ret;
}
@@ -145,6 +152,8 @@ mlxreg_io_attr_store(struct device *dev, struct device_attribute *attr,
if (ret)
return ret;
+ mutex_lock(&priv->io_lock);
+
ret = mlxreg_io_get_reg(priv->pdata->regmap, data, input_val, false,
priv->regsize, &regval);
if (ret)
@@ -154,9 +163,12 @@ mlxreg_io_attr_store(struct device *dev, struct device_attribute *attr,
if (ret)
goto access_error;
+ mutex_unlock(&priv->io_lock);
+
return len;
access_error:
+ mutex_unlock(&priv->io_lock);
dev_err(&priv->pdev->dev, "Bus access error\n");
return ret;
}
@@ -246,16 +258,27 @@ static int mlxreg_io_probe(struct platform_device *pdev)
return PTR_ERR(priv->hwmon);
}
+ mutex_init(&priv->io_lock);
dev_set_drvdata(&pdev->dev, priv);
return 0;
}
+static int mlxreg_io_remove(struct platform_device *pdev)
+{
+ struct mlxreg_io_priv_data *priv = dev_get_drvdata(&pdev->dev);
+
+ mutex_destroy(&priv->io_lock);
+
+ return 0;
+}
+
static struct platform_driver mlxreg_io_driver = {
.driver = {
.name = "mlxreg-io",
},
.probe = mlxreg_io_probe,
+ .remove = mlxreg_io_remove,
};
module_platform_driver(mlxreg_io_driver);
diff --git a/drivers/platform/mellanox/mlxreg-lc.c b/drivers/platform/mellanox/mlxreg-lc.c
index c897a2f15840..55834ccb4ac7 100644
--- a/drivers/platform/mellanox/mlxreg-lc.c
+++ b/drivers/platform/mellanox/mlxreg-lc.c
@@ -716,8 +716,12 @@ mlxreg_lc_config_init(struct mlxreg_lc *mlxreg_lc, void *regmap,
switch (regval) {
case MLXREG_LC_SN4800_C16:
err = mlxreg_lc_sn4800_c16_config_init(mlxreg_lc, regmap, data);
- if (err)
+ if (err) {
+ dev_err(dev, "Failed to config client %s at bus %d at addr 0x%02x\n",
+ data->hpdev.brdinfo->type, data->hpdev.nr,
+ data->hpdev.brdinfo->addr);
return err;
+ }
break;
default:
return -ENODEV;
@@ -730,8 +734,11 @@ mlxreg_lc_config_init(struct mlxreg_lc *mlxreg_lc, void *regmap,
mlxreg_lc->mux = platform_device_register_resndata(dev, "i2c-mux-mlxcpld", data->hpdev.nr,
NULL, 0, mlxreg_lc->mux_data,
sizeof(*mlxreg_lc->mux_data));
- if (IS_ERR(mlxreg_lc->mux))
+ if (IS_ERR(mlxreg_lc->mux)) {
+ dev_err(dev, "Failed to create mux infra for client %s at bus %d at addr 0x%02x\n",
+ data->hpdev.brdinfo->type, data->hpdev.nr, data->hpdev.brdinfo->addr);
return PTR_ERR(mlxreg_lc->mux);
+ }
/* Register IO access driver. */
if (mlxreg_lc->io_data) {
@@ -740,6 +747,9 @@ mlxreg_lc_config_init(struct mlxreg_lc *mlxreg_lc, void *regmap,
platform_device_register_resndata(dev, "mlxreg-io", data->hpdev.nr, NULL, 0,
mlxreg_lc->io_data, sizeof(*mlxreg_lc->io_data));
if (IS_ERR(mlxreg_lc->io_regs)) {
+ dev_err(dev, "Failed to create regio for client %s at bus %d at addr 0x%02x\n",
+ data->hpdev.brdinfo->type, data->hpdev.nr,
+ data->hpdev.brdinfo->addr);
err = PTR_ERR(mlxreg_lc->io_regs);
goto fail_register_io;
}
@@ -753,6 +763,9 @@ mlxreg_lc_config_init(struct mlxreg_lc *mlxreg_lc, void *regmap,
mlxreg_lc->led_data,
sizeof(*mlxreg_lc->led_data));
if (IS_ERR(mlxreg_lc->led)) {
+ dev_err(dev, "Failed to create LED objects for client %s at bus %d at addr 0x%02x\n",
+ data->hpdev.brdinfo->type, data->hpdev.nr,
+ data->hpdev.brdinfo->addr);
err = PTR_ERR(mlxreg_lc->led);
goto fail_register_led;
}
@@ -809,7 +822,8 @@ static int mlxreg_lc_probe(struct platform_device *pdev)
if (!data->hpdev.adapter) {
dev_err(&pdev->dev, "Failed to get adapter for bus %d\n",
data->hpdev.nr);
- return -EFAULT;
+ err = -EFAULT;
+ goto i2c_get_adapter_fail;
}
/* Create device at the top of line card I2C tree.*/
@@ -818,32 +832,40 @@ static int mlxreg_lc_probe(struct platform_device *pdev)
if (IS_ERR(data->hpdev.client)) {
dev_err(&pdev->dev, "Failed to create client %s at bus %d at addr 0x%02x\n",
data->hpdev.brdinfo->type, data->hpdev.nr, data->hpdev.brdinfo->addr);
-
- i2c_put_adapter(data->hpdev.adapter);
- data->hpdev.adapter = NULL;
- return PTR_ERR(data->hpdev.client);
+ err = PTR_ERR(data->hpdev.client);
+ goto i2c_new_device_fail;
}
regmap = devm_regmap_init_i2c(data->hpdev.client,
&mlxreg_lc_regmap_conf);
if (IS_ERR(regmap)) {
+ dev_err(&pdev->dev, "Failed to create regmap for client %s at bus %d at addr 0x%02x\n",
+ data->hpdev.brdinfo->type, data->hpdev.nr, data->hpdev.brdinfo->addr);
err = PTR_ERR(regmap);
- goto mlxreg_lc_probe_fail;
+ goto devm_regmap_init_i2c_fail;
}
/* Set default registers. */
for (i = 0; i < mlxreg_lc_regmap_conf.num_reg_defaults; i++) {
err = regmap_write(regmap, mlxreg_lc_regmap_default[i].reg,
mlxreg_lc_regmap_default[i].def);
- if (err)
- goto mlxreg_lc_probe_fail;
+ if (err) {
+ dev_err(&pdev->dev, "Failed to set default regmap %d for client %s at bus %d at addr 0x%02x\n",
+ i, data->hpdev.brdinfo->type, data->hpdev.nr,
+ data->hpdev.brdinfo->addr);
+ goto regmap_write_fail;
+ }
}
/* Sync registers with hardware. */
regcache_mark_dirty(regmap);
err = regcache_sync(regmap);
- if (err)
- goto mlxreg_lc_probe_fail;
+ if (err) {
+ dev_err(&pdev->dev, "Failed to sync regmap for client %s at bus %d at addr 0x%02x\n",
+ data->hpdev.brdinfo->type, data->hpdev.nr, data->hpdev.brdinfo->addr);
+ err = PTR_ERR(regmap);
+ goto regcache_sync_fail;
+ }
par_pdata = data->hpdev.brdinfo->platform_data;
mlxreg_lc->par_regmap = par_pdata->regmap;
@@ -854,12 +876,27 @@ static int mlxreg_lc_probe(struct platform_device *pdev)
/* Configure line card. */
err = mlxreg_lc_config_init(mlxreg_lc, regmap, data);
if (err)
- goto mlxreg_lc_probe_fail;
+ goto mlxreg_lc_config_init_fail;
return err;
-mlxreg_lc_probe_fail:
+mlxreg_lc_config_init_fail:
+regcache_sync_fail:
+regmap_write_fail:
+devm_regmap_init_i2c_fail:
+ if (data->hpdev.client) {
+ i2c_unregister_device(data->hpdev.client);
+ data->hpdev.client = NULL;
+ }
+i2c_new_device_fail:
i2c_put_adapter(data->hpdev.adapter);
+ data->hpdev.adapter = NULL;
+i2c_get_adapter_fail:
+ /* Clear event notification callback and handle. */
+ if (data->notifier) {
+ data->notifier->user_handler = NULL;
+ data->notifier->handle = NULL;
+ }
return err;
}
@@ -868,11 +905,18 @@ static int mlxreg_lc_remove(struct platform_device *pdev)
struct mlxreg_core_data *data = dev_get_platdata(&pdev->dev);
struct mlxreg_lc *mlxreg_lc = platform_get_drvdata(pdev);
- /* Clear event notification callback. */
- if (data->notifier) {
- data->notifier->user_handler = NULL;
- data->notifier->handle = NULL;
- }
+ /*
+ * Probing and removing are invoked by hotplug events raised upon line card insertion and
+ * removing. If probing procedure fails all data is cleared. However, hotplug event still
+ * will be raised on line card removing and activate removing procedure. In this case there
+ * is nothing to remove.
+ */
+ if (!data->notifier || !data->notifier->handle)
+ return 0;
+
+ /* Clear event notification callback and handle. */
+ data->notifier->user_handler = NULL;
+ data->notifier->handle = NULL;
/* Destroy static I2C device feeding by main power. */
mlxreg_lc_destroy_static_devices(mlxreg_lc, mlxreg_lc->main_devs,
diff --git a/drivers/platform/olpc/olpc-ec.c b/drivers/platform/olpc/olpc-ec.c
index 4ff5c3a12991..921520475ff6 100644
--- a/drivers/platform/olpc/olpc-ec.c
+++ b/drivers/platform/olpc/olpc-ec.c
@@ -264,7 +264,7 @@ static ssize_t ec_dbgfs_cmd_write(struct file *file, const char __user *buf,
int i, m;
unsigned char ec_cmd[EC_MAX_CMD_ARGS];
unsigned int ec_cmd_int[EC_MAX_CMD_ARGS];
- char cmdbuf[64];
+ char cmdbuf[64] = "";
int ec_cmd_bytes;
mutex_lock(&ec_dbgfs_lock);
diff --git a/drivers/platform/surface/Kconfig b/drivers/platform/surface/Kconfig
index eb79fbed8059..b629e82af97c 100644
--- a/drivers/platform/surface/Kconfig
+++ b/drivers/platform/surface/Kconfig
@@ -72,18 +72,45 @@ config SURFACE_AGGREGATOR_CDEV
The provided interface is intended for debugging and development only,
and should not be used otherwise.
+config SURFACE_AGGREGATOR_HUB
+ tristate "Surface System Aggregator Module Subsystem Device Hubs"
+ depends on SURFACE_AGGREGATOR
+ depends on SURFACE_AGGREGATOR_BUS
+ help
+ Device-hub drivers for Surface System Aggregator Module (SSAM) subsystem
+ devices.
+
+ Provides subsystem hub drivers which manage client devices on various
+ SSAM subsystems. In some subsystems, notably the BAS subsystem managing
+ devices contained in the base of the Surface Book 3 and the KIP subsystem
+ managing type-cover devices in the Surface Pro 8 and Surface Pro X,
+ devices can be (hot-)removed. Hub devices and drivers are required to
+ manage these subdevices.
+
+ Devices managed via these hubs are:
+ - Battery/AC devices (Surface Book 3).
+ - HID input devices (7th-generation and later models with detachable
+ input devices).
+
+ Select M (recommended) or Y here if you want support for the above
+ mentioned devices on the corresponding Surface models. Without this
+ module, the respective devices mentioned above will not be instantiated
+ and thus any functionality provided by them will be missing, even when
+ drivers for these devices are present. This module only provides the
+ respective subsystem hubs. Both drivers and device specification (e.g.
+ via the Surface Aggregator Registry) for these devices still need to be
+ selected via other options.
+
config SURFACE_AGGREGATOR_REGISTRY
tristate "Surface System Aggregator Module Device Registry"
depends on SURFACE_AGGREGATOR
depends on SURFACE_AGGREGATOR_BUS
help
- Device-registry and device-hubs for Surface System Aggregator Module
- (SSAM) devices.
+ Device-registry for Surface System Aggregator Module (SSAM) devices.
Provides a module and driver which act as a device-registry for SSAM
client devices that cannot be detected automatically, e.g. via ACPI.
- Such devices are instead provided via this registry and attached via
- device hubs, also provided in this module.
+ Such devices are instead provided and managed via this registry.
Devices provided via this registry are:
- Platform profile (performance-/cooling-mode) device (5th- and later
@@ -99,6 +126,29 @@ config SURFACE_AGGREGATOR_REGISTRY
the respective client devices. Drivers for these devices still need to
be selected via the other options.
+config SURFACE_AGGREGATOR_TABLET_SWITCH
+ tristate "Surface Aggregator Generic Tablet-Mode Switch Driver"
+ depends on SURFACE_AGGREGATOR
+ depends on SURFACE_AGGREGATOR_BUS
+ depends on INPUT
+ help
+ Provides a tablet-mode switch input device on Microsoft Surface models
+ using the KIP subsystem for detachable keyboards (e.g. keyboard covers)
+ or the POS subsystem for device/screen posture changes.
+
+ The KIP subsystem is used on newer Surface generations to handle
+ detachable input peripherals, specifically the keyboard cover (containing
+ keyboard and touchpad) on the Surface Pro 8 and Surface Pro X. The POS
+ subsystem is used for device posture change notifications on the Surface
+ Laptop Studio. This module provides a driver to let user-space know when
+ the device should be considered in tablet-mode due to the keyboard cover
+ being detached or folded back (essentially signaling when the keyboard is
+ not available for input). It does so by creating a tablet-mode switch
+ input device, sending the standard SW_TABLET_MODE event on mode change.
+
+ Select M or Y here, if you want to provide tablet-mode switch input
+ events on the Surface Pro 8, Surface Pro X, and Surface Laptop Studio.
+
config SURFACE_DTX
tristate "Surface DTX (Detachment System) Driver"
depends on SURFACE_AGGREGATOR
diff --git a/drivers/platform/surface/Makefile b/drivers/platform/surface/Makefile
index 0fc9cd3e4dd9..53344330939b 100644
--- a/drivers/platform/surface/Makefile
+++ b/drivers/platform/surface/Makefile
@@ -9,7 +9,9 @@ obj-$(CONFIG_SURFACE_3_POWER_OPREGION) += surface3_power.o
obj-$(CONFIG_SURFACE_ACPI_NOTIFY) += surface_acpi_notify.o
obj-$(CONFIG_SURFACE_AGGREGATOR) += aggregator/
obj-$(CONFIG_SURFACE_AGGREGATOR_CDEV) += surface_aggregator_cdev.o
+obj-$(CONFIG_SURFACE_AGGREGATOR_HUB) += surface_aggregator_hub.o
obj-$(CONFIG_SURFACE_AGGREGATOR_REGISTRY) += surface_aggregator_registry.o
+obj-$(CONFIG_SURFACE_AGGREGATOR_TABLET_SWITCH) += surface_aggregator_tabletsw.o
obj-$(CONFIG_SURFACE_DTX) += surface_dtx.o
obj-$(CONFIG_SURFACE_GPE) += surface_gpe.o
obj-$(CONFIG_SURFACE_HOTPLUG) += surface_hotplug.o
diff --git a/drivers/platform/surface/aggregator/Kconfig b/drivers/platform/surface/aggregator/Kconfig
index cab020324256..c114f9dd5fe1 100644
--- a/drivers/platform/surface/aggregator/Kconfig
+++ b/drivers/platform/surface/aggregator/Kconfig
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0+
-# Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+# Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
menuconfig SURFACE_AGGREGATOR
tristate "Microsoft Surface System Aggregator Module Subsystem and Drivers"
diff --git a/drivers/platform/surface/aggregator/Makefile b/drivers/platform/surface/aggregator/Makefile
index c0d550eda5cd..fdf664a217f9 100644
--- a/drivers/platform/surface/aggregator/Makefile
+++ b/drivers/platform/surface/aggregator/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0+
-# Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+# Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
# For include/trace/define_trace.h to include trace.h
CFLAGS_core.o = -I$(src)
diff --git a/drivers/platform/surface/aggregator/bus.c b/drivers/platform/surface/aggregator/bus.c
index abbbb5b08b07..de539938896e 100644
--- a/drivers/platform/surface/aggregator/bus.c
+++ b/drivers/platform/surface/aggregator/bus.c
@@ -2,10 +2,11 @@
/*
* Surface System Aggregator Module bus and device integration.
*
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
*/
#include <linux/device.h>
+#include <linux/property.h>
#include <linux/slab.h>
#include <linux/surface_aggregator/controller.h>
@@ -14,6 +15,9 @@
#include "bus.h"
#include "controller.h"
+
+/* -- Device and bus functions. --------------------------------------------- */
+
static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
@@ -46,6 +50,7 @@ static void ssam_device_release(struct device *dev)
struct ssam_device *sdev = to_ssam_device(dev);
ssam_controller_put(sdev->ctrl);
+ fwnode_handle_put(sdev->dev.fwnode);
kfree(sdev);
}
@@ -363,6 +368,134 @@ void ssam_device_driver_unregister(struct ssam_device_driver *sdrv)
}
EXPORT_SYMBOL_GPL(ssam_device_driver_unregister);
+
+/* -- Bus registration. ----------------------------------------------------- */
+
+/**
+ * ssam_bus_register() - Register and set-up the SSAM client device bus.
+ */
+int ssam_bus_register(void)
+{
+ return bus_register(&ssam_bus_type);
+}
+
+/**
+ * ssam_bus_unregister() - Unregister the SSAM client device bus.
+ */
+void ssam_bus_unregister(void)
+{
+ return bus_unregister(&ssam_bus_type);
+}
+
+
+/* -- Helpers for controller and hub devices. ------------------------------- */
+
+static int ssam_device_uid_from_string(const char *str, struct ssam_device_uid *uid)
+{
+ u8 d, tc, tid, iid, fn;
+ int n;
+
+ n = sscanf(str, "%hhx:%hhx:%hhx:%hhx:%hhx", &d, &tc, &tid, &iid, &fn);
+ if (n != 5)
+ return -EINVAL;
+
+ uid->domain = d;
+ uid->category = tc;
+ uid->target = tid;
+ uid->instance = iid;
+ uid->function = fn;
+
+ return 0;
+}
+
+static int ssam_get_uid_for_node(struct fwnode_handle *node, struct ssam_device_uid *uid)
+{
+ const char *str = fwnode_get_name(node);
+
+ /*
+ * To simplify definitions of firmware nodes, we set the device name
+ * based on the UID of the device, prefixed with "ssam:".
+ */
+ if (strncmp(str, "ssam:", strlen("ssam:")) != 0)
+ return -ENODEV;
+
+ str += strlen("ssam:");
+ return ssam_device_uid_from_string(str, uid);
+}
+
+static int ssam_add_client_device(struct device *parent, struct ssam_controller *ctrl,
+ struct fwnode_handle *node)
+{
+ struct ssam_device_uid uid;
+ struct ssam_device *sdev;
+ int status;
+
+ status = ssam_get_uid_for_node(node, &uid);
+ if (status)
+ return status;
+
+ sdev = ssam_device_alloc(ctrl, uid);
+ if (!sdev)
+ return -ENOMEM;
+
+ sdev->dev.parent = parent;
+ sdev->dev.fwnode = fwnode_handle_get(node);
+
+ status = ssam_device_add(sdev);
+ if (status)
+ ssam_device_put(sdev);
+
+ return status;
+}
+
+/**
+ * __ssam_register_clients() - Register client devices defined under the
+ * given firmware node as children of the given device.
+ * @parent: The parent device under which clients should be registered.
+ * @ctrl: The controller with which client should be registered.
+ * @node: The firmware node holding definitions of the devices to be added.
+ *
+ * Register all clients that have been defined as children of the given root
+ * firmware node as children of the given parent device. The respective child
+ * firmware nodes will be associated with the correspondingly created child
+ * devices.
+ *
+ * The given controller will be used to instantiate the new devices. See
+ * ssam_device_add() for details.
+ *
+ * Note that, generally, the use of either ssam_device_register_clients() or
+ * ssam_register_clients() should be preferred as they directly use the
+ * firmware node and/or controller associated with the given device. This
+ * function is only intended for use when different device specifications (e.g.
+ * ACPI and firmware nodes) need to be combined (as is done in the platform hub
+ * of the device registry).
+ *
+ * Return: Returns zero on success, nonzero on failure.
+ */
+int __ssam_register_clients(struct device *parent, struct ssam_controller *ctrl,
+ struct fwnode_handle *node)
+{
+ struct fwnode_handle *child;
+ int status;
+
+ fwnode_for_each_child_node(node, child) {
+ /*
+ * Try to add the device specified in the firmware node. If
+ * this fails with -ENODEV, the node does not specify any SSAM
+ * device, so ignore it and continue with the next one.
+ */
+ status = ssam_add_client_device(parent, ctrl, child);
+ if (status && status != -ENODEV)
+ goto err;
+ }
+
+ return 0;
+err:
+ ssam_remove_clients(parent);
+ return status;
+}
+EXPORT_SYMBOL_GPL(__ssam_register_clients);
+
static int ssam_remove_device(struct device *dev, void *_data)
{
struct ssam_device *sdev = to_ssam_device(dev);
@@ -387,19 +520,3 @@ void ssam_remove_clients(struct device *dev)
device_for_each_child_reverse(dev, NULL, ssam_remove_device);
}
EXPORT_SYMBOL_GPL(ssam_remove_clients);
-
-/**
- * ssam_bus_register() - Register and set-up the SSAM client device bus.
- */
-int ssam_bus_register(void)
-{
- return bus_register(&ssam_bus_type);
-}
-
-/**
- * ssam_bus_unregister() - Unregister the SSAM client device bus.
- */
-void ssam_bus_unregister(void)
-{
- return bus_unregister(&ssam_bus_type);
-}
diff --git a/drivers/platform/surface/aggregator/bus.h b/drivers/platform/surface/aggregator/bus.h
index 6964ee84e79c..5b4dbf21906c 100644
--- a/drivers/platform/surface/aggregator/bus.h
+++ b/drivers/platform/surface/aggregator/bus.h
@@ -2,7 +2,7 @@
/*
* Surface System Aggregator Module bus and device integration.
*
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
*/
#ifndef _SURFACE_AGGREGATOR_BUS_H
diff --git a/drivers/platform/surface/aggregator/controller.c b/drivers/platform/surface/aggregator/controller.c
index b8c377b3f932..43e765199137 100644
--- a/drivers/platform/surface/aggregator/controller.c
+++ b/drivers/platform/surface/aggregator/controller.c
@@ -2,7 +2,7 @@
/*
* Main SSAM/SSH controller structure and functionality.
*
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
*/
#include <linux/acpi.h>
@@ -2199,16 +2199,26 @@ static int ssam_nf_refcount_enable(struct ssam_controller *ctrl,
}
/**
- * ssam_nf_refcount_disable_free() - Disable event for reference count entry if it is
- * no longer in use and free the corresponding entry.
+ * ssam_nf_refcount_disable_free() - Disable event for reference count entry if
+ * it is no longer in use and free the corresponding entry.
* @ctrl: The controller to disable the event on.
* @entry: The reference count entry for the event to be disabled.
* @flags: The flags used for enabling the event on the EC.
+ * @ec: Flag specifying if the event should actually be disabled on the EC.
*
- * If the reference count equals zero, i.e. the event is no longer requested by
- * any client, the event will be disabled and the corresponding reference count
- * entry freed. The reference count entry must not be used any more after a
- * call to this function.
+ * If ``ec`` equals ``true`` and the reference count equals zero (i.e. the
+ * event is no longer requested by any client), the specified event will be
+ * disabled on the EC via the corresponding request.
+ *
+ * If ``ec`` equals ``false``, no request will be sent to the EC and the event
+ * can be considered in a detached state (i.e. no longer used but still
+ * enabled). Disabling an event via this method may be required for
+ * hot-removable devices, where event disable requests may time out after the
+ * device has been physically removed.
+ *
+ * In both cases, if the reference count equals zero, the corresponding
+ * reference count entry will be freed. The reference count entry must not be
+ * used any more after a call to this function.
*
* Also checks if the flags used for disabling the event match the flags used
* for enabling the event and warns if they do not (regardless of reference
@@ -2223,7 +2233,7 @@ static int ssam_nf_refcount_enable(struct ssam_controller *ctrl,
* returns the status of the event-enable EC command.
*/
static int ssam_nf_refcount_disable_free(struct ssam_controller *ctrl,
- struct ssam_nf_refcount_entry *entry, u8 flags)
+ struct ssam_nf_refcount_entry *entry, u8 flags, bool ec)
{
const struct ssam_event_registry reg = entry->key.reg;
const struct ssam_event_id id = entry->key.id;
@@ -2232,8 +2242,9 @@ static int ssam_nf_refcount_disable_free(struct ssam_controller *ctrl,
lockdep_assert_held(&nf->lock);
- ssam_dbg(ctrl, "disabling event (reg: %#04x, tc: %#04x, iid: %#04x, rc: %d)\n",
- reg.target_category, id.target_category, id.instance, entry->refcount);
+ ssam_dbg(ctrl, "%s event (reg: %#04x, tc: %#04x, iid: %#04x, rc: %d)\n",
+ ec ? "disabling" : "detaching", reg.target_category, id.target_category,
+ id.instance, entry->refcount);
if (entry->flags != flags) {
ssam_warn(ctrl,
@@ -2242,7 +2253,7 @@ static int ssam_nf_refcount_disable_free(struct ssam_controller *ctrl,
id.instance);
}
- if (entry->refcount == 0) {
+ if (ec && entry->refcount == 0) {
status = ssam_ssh_event_disable(ctrl, reg, id, flags);
kfree(entry);
}
@@ -2322,20 +2333,26 @@ int ssam_notifier_register(struct ssam_controller *ctrl, struct ssam_event_notif
EXPORT_SYMBOL_GPL(ssam_notifier_register);
/**
- * ssam_notifier_unregister() - Unregister an event notifier.
- * @ctrl: The controller the notifier has been registered on.
- * @n: The event notifier to unregister.
+ * __ssam_notifier_unregister() - Unregister an event notifier.
+ * @ctrl: The controller the notifier has been registered on.
+ * @n: The event notifier to unregister.
+ * @disable: Whether to disable the corresponding event on the EC.
*
* Unregister an event notifier. Decrement the usage counter of the associated
* SAM event if the notifier is not marked as an observer. If the usage counter
- * reaches zero, the event will be disabled.
+ * reaches zero and ``disable`` equals ``true``, the event will be disabled.
+ *
+ * Useful for hot-removable devices, where communication may fail once the
+ * device has been physically removed. In that case, specifying ``disable`` as
+ * ``false`` avoids communication with the EC.
*
* Return: Returns zero on success, %-ENOENT if the given notifier block has
* not been registered on the controller. If the given notifier block was the
* last one associated with its specific event, returns the status of the
* event-disable EC-command.
*/
-int ssam_notifier_unregister(struct ssam_controller *ctrl, struct ssam_event_notifier *n)
+int __ssam_notifier_unregister(struct ssam_controller *ctrl, struct ssam_event_notifier *n,
+ bool disable)
{
u16 rqid = ssh_tc_to_rqid(n->event.id.target_category);
struct ssam_nf_refcount_entry *entry;
@@ -2373,7 +2390,7 @@ int ssam_notifier_unregister(struct ssam_controller *ctrl, struct ssam_event_not
goto remove;
}
- status = ssam_nf_refcount_disable_free(ctrl, entry, n->event.flags);
+ status = ssam_nf_refcount_disable_free(ctrl, entry, n->event.flags, disable);
}
remove:
@@ -2383,7 +2400,7 @@ remove:
return status;
}
-EXPORT_SYMBOL_GPL(ssam_notifier_unregister);
+EXPORT_SYMBOL_GPL(__ssam_notifier_unregister);
/**
* ssam_controller_event_enable() - Enable the specified event.
@@ -2477,7 +2494,7 @@ int ssam_controller_event_disable(struct ssam_controller *ctrl,
return -ENOENT;
}
- status = ssam_nf_refcount_disable_free(ctrl, entry, flags);
+ status = ssam_nf_refcount_disable_free(ctrl, entry, flags, true);
mutex_unlock(&nf->lock);
return status;
diff --git a/drivers/platform/surface/aggregator/controller.h b/drivers/platform/surface/aggregator/controller.h
index a0963c3562ff..f0d987abc51e 100644
--- a/drivers/platform/surface/aggregator/controller.h
+++ b/drivers/platform/surface/aggregator/controller.h
@@ -2,7 +2,7 @@
/*
* Main SSAM/SSH controller structure and functionality.
*
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
*/
#ifndef _SURFACE_AGGREGATOR_CONTROLLER_H
diff --git a/drivers/platform/surface/aggregator/core.c b/drivers/platform/surface/aggregator/core.c
index a62c5dfe42d6..1a6373dea109 100644
--- a/drivers/platform/surface/aggregator/core.c
+++ b/drivers/platform/surface/aggregator/core.c
@@ -7,7 +7,7 @@
* Handles communication via requests as well as enabling, disabling, and
* relaying of events.
*
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
*/
#include <linux/acpi.h>
diff --git a/drivers/platform/surface/aggregator/ssh_msgb.h b/drivers/platform/surface/aggregator/ssh_msgb.h
index e562958ffdf0..f3ecad92eefd 100644
--- a/drivers/platform/surface/aggregator/ssh_msgb.h
+++ b/drivers/platform/surface/aggregator/ssh_msgb.h
@@ -2,7 +2,7 @@
/*
* SSH message builder functions.
*
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
*/
#ifndef _SURFACE_AGGREGATOR_SSH_MSGB_H
diff --git a/drivers/platform/surface/aggregator/ssh_packet_layer.c b/drivers/platform/surface/aggregator/ssh_packet_layer.c
index 8a4451c1ffe5..6748fe4ac5d5 100644
--- a/drivers/platform/surface/aggregator/ssh_packet_layer.c
+++ b/drivers/platform/surface/aggregator/ssh_packet_layer.c
@@ -2,7 +2,7 @@
/*
* SSH packet transport layer.
*
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
*/
#include <asm/unaligned.h>
diff --git a/drivers/platform/surface/aggregator/ssh_packet_layer.h b/drivers/platform/surface/aggregator/ssh_packet_layer.h
index 2eb329f0b91a..64633522f971 100644
--- a/drivers/platform/surface/aggregator/ssh_packet_layer.h
+++ b/drivers/platform/surface/aggregator/ssh_packet_layer.h
@@ -2,7 +2,7 @@
/*
* SSH packet transport layer.
*
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
*/
#ifndef _SURFACE_AGGREGATOR_SSH_PACKET_LAYER_H
diff --git a/drivers/platform/surface/aggregator/ssh_parser.c b/drivers/platform/surface/aggregator/ssh_parser.c
index b77912f8f13b..a6f668694365 100644
--- a/drivers/platform/surface/aggregator/ssh_parser.c
+++ b/drivers/platform/surface/aggregator/ssh_parser.c
@@ -2,7 +2,7 @@
/*
* SSH message parser.
*
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
*/
#include <asm/unaligned.h>
diff --git a/drivers/platform/surface/aggregator/ssh_parser.h b/drivers/platform/surface/aggregator/ssh_parser.h
index 3bd6e180fd16..801d8fa69fb5 100644
--- a/drivers/platform/surface/aggregator/ssh_parser.h
+++ b/drivers/platform/surface/aggregator/ssh_parser.h
@@ -2,7 +2,7 @@
/*
* SSH message parser.
*
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
*/
#ifndef _SURFACE_AGGREGATOR_SSH_PARSER_H
diff --git a/drivers/platform/surface/aggregator/ssh_request_layer.c b/drivers/platform/surface/aggregator/ssh_request_layer.c
index 790f7f0eee98..f5565570f16c 100644
--- a/drivers/platform/surface/aggregator/ssh_request_layer.c
+++ b/drivers/platform/surface/aggregator/ssh_request_layer.c
@@ -2,7 +2,7 @@
/*
* SSH request transport layer.
*
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
*/
#include <asm/unaligned.h>
diff --git a/drivers/platform/surface/aggregator/ssh_request_layer.h b/drivers/platform/surface/aggregator/ssh_request_layer.h
index 9c3cbae2d4bd..4e387a031351 100644
--- a/drivers/platform/surface/aggregator/ssh_request_layer.h
+++ b/drivers/platform/surface/aggregator/ssh_request_layer.h
@@ -2,7 +2,7 @@
/*
* SSH request transport layer.
*
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
*/
#ifndef _SURFACE_AGGREGATOR_SSH_REQUEST_LAYER_H
diff --git a/drivers/platform/surface/aggregator/trace.h b/drivers/platform/surface/aggregator/trace.h
index de64cf169060..2a2c17771d01 100644
--- a/drivers/platform/surface/aggregator/trace.h
+++ b/drivers/platform/surface/aggregator/trace.h
@@ -2,7 +2,7 @@
/*
* Trace points for SSAM/SSH.
*
- * Copyright (C) 2020-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2020-2022 Maximilian Luz <luzmaximilian@gmail.com>
*/
#undef TRACE_SYSTEM
@@ -76,7 +76,7 @@ TRACE_DEFINE_ENUM(SSAM_SSH_TC_HID);
TRACE_DEFINE_ENUM(SSAM_SSH_TC_TCH);
TRACE_DEFINE_ENUM(SSAM_SSH_TC_BKL);
TRACE_DEFINE_ENUM(SSAM_SSH_TC_TAM);
-TRACE_DEFINE_ENUM(SSAM_SSH_TC_ACC);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_ACC0);
TRACE_DEFINE_ENUM(SSAM_SSH_TC_UFI);
TRACE_DEFINE_ENUM(SSAM_SSH_TC_USC);
TRACE_DEFINE_ENUM(SSAM_SSH_TC_PEN);
@@ -85,6 +85,11 @@ TRACE_DEFINE_ENUM(SSAM_SSH_TC_AUD);
TRACE_DEFINE_ENUM(SSAM_SSH_TC_SMC);
TRACE_DEFINE_ENUM(SSAM_SSH_TC_KPD);
TRACE_DEFINE_ENUM(SSAM_SSH_TC_REG);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_SPT);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_SYS);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_ACC1);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_SHB);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_POS);
#define SSAM_PTR_UID_LEN 9
#define SSAM_U8_FIELD_NOT_APPLICABLE ((u16)-1)
@@ -229,40 +234,45 @@ static inline u32 ssam_trace_get_request_tc(const struct ssh_packet *p)
#define ssam_show_ssh_tc(rqid) \
__print_symbolic(rqid, \
- { SSAM_SSH_TC_NOT_APPLICABLE, "N/A" }, \
- { SSAM_SSH_TC_SAM, "SAM" }, \
- { SSAM_SSH_TC_BAT, "BAT" }, \
- { SSAM_SSH_TC_TMP, "TMP" }, \
- { SSAM_SSH_TC_PMC, "PMC" }, \
- { SSAM_SSH_TC_FAN, "FAN" }, \
- { SSAM_SSH_TC_PoM, "PoM" }, \
- { SSAM_SSH_TC_DBG, "DBG" }, \
- { SSAM_SSH_TC_KBD, "KBD" }, \
- { SSAM_SSH_TC_FWU, "FWU" }, \
- { SSAM_SSH_TC_UNI, "UNI" }, \
- { SSAM_SSH_TC_LPC, "LPC" }, \
- { SSAM_SSH_TC_TCL, "TCL" }, \
- { SSAM_SSH_TC_SFL, "SFL" }, \
- { SSAM_SSH_TC_KIP, "KIP" }, \
- { SSAM_SSH_TC_EXT, "EXT" }, \
- { SSAM_SSH_TC_BLD, "BLD" }, \
- { SSAM_SSH_TC_BAS, "BAS" }, \
- { SSAM_SSH_TC_SEN, "SEN" }, \
- { SSAM_SSH_TC_SRQ, "SRQ" }, \
- { SSAM_SSH_TC_MCU, "MCU" }, \
- { SSAM_SSH_TC_HID, "HID" }, \
- { SSAM_SSH_TC_TCH, "TCH" }, \
- { SSAM_SSH_TC_BKL, "BKL" }, \
- { SSAM_SSH_TC_TAM, "TAM" }, \
- { SSAM_SSH_TC_ACC, "ACC" }, \
- { SSAM_SSH_TC_UFI, "UFI" }, \
- { SSAM_SSH_TC_USC, "USC" }, \
- { SSAM_SSH_TC_PEN, "PEN" }, \
- { SSAM_SSH_TC_VID, "VID" }, \
- { SSAM_SSH_TC_AUD, "AUD" }, \
- { SSAM_SSH_TC_SMC, "SMC" }, \
- { SSAM_SSH_TC_KPD, "KPD" }, \
- { SSAM_SSH_TC_REG, "REG" } \
+ { SSAM_SSH_TC_NOT_APPLICABLE, "N/A" }, \
+ { SSAM_SSH_TC_SAM, "SAM" }, \
+ { SSAM_SSH_TC_BAT, "BAT" }, \
+ { SSAM_SSH_TC_TMP, "TMP" }, \
+ { SSAM_SSH_TC_PMC, "PMC" }, \
+ { SSAM_SSH_TC_FAN, "FAN" }, \
+ { SSAM_SSH_TC_PoM, "PoM" }, \
+ { SSAM_SSH_TC_DBG, "DBG" }, \
+ { SSAM_SSH_TC_KBD, "KBD" }, \
+ { SSAM_SSH_TC_FWU, "FWU" }, \
+ { SSAM_SSH_TC_UNI, "UNI" }, \
+ { SSAM_SSH_TC_LPC, "LPC" }, \
+ { SSAM_SSH_TC_TCL, "TCL" }, \
+ { SSAM_SSH_TC_SFL, "SFL" }, \
+ { SSAM_SSH_TC_KIP, "KIP" }, \
+ { SSAM_SSH_TC_EXT, "EXT" }, \
+ { SSAM_SSH_TC_BLD, "BLD" }, \
+ { SSAM_SSH_TC_BAS, "BAS" }, \
+ { SSAM_SSH_TC_SEN, "SEN" }, \
+ { SSAM_SSH_TC_SRQ, "SRQ" }, \
+ { SSAM_SSH_TC_MCU, "MCU" }, \
+ { SSAM_SSH_TC_HID, "HID" }, \
+ { SSAM_SSH_TC_TCH, "TCH" }, \
+ { SSAM_SSH_TC_BKL, "BKL" }, \
+ { SSAM_SSH_TC_TAM, "TAM" }, \
+ { SSAM_SSH_TC_ACC0, "ACC0" }, \
+ { SSAM_SSH_TC_UFI, "UFI" }, \
+ { SSAM_SSH_TC_USC, "USC" }, \
+ { SSAM_SSH_TC_PEN, "PEN" }, \
+ { SSAM_SSH_TC_VID, "VID" }, \
+ { SSAM_SSH_TC_AUD, "AUD" }, \
+ { SSAM_SSH_TC_SMC, "SMC" }, \
+ { SSAM_SSH_TC_KPD, "KPD" }, \
+ { SSAM_SSH_TC_REG, "REG" }, \
+ { SSAM_SSH_TC_SPT, "SPT" }, \
+ { SSAM_SSH_TC_SYS, "SYS" }, \
+ { SSAM_SSH_TC_ACC1, "ACC1" }, \
+ { SSAM_SSH_TC_SHB, "SMB" }, \
+ { SSAM_SSH_TC_POS, "POS" } \
)
DECLARE_EVENT_CLASS(ssam_frame_class,
diff --git a/drivers/platform/surface/surface_acpi_notify.c b/drivers/platform/surface/surface_acpi_notify.c
index 7b758f8cc137..44e317970557 100644
--- a/drivers/platform/surface/surface_acpi_notify.c
+++ b/drivers/platform/surface/surface_acpi_notify.c
@@ -8,7 +8,7 @@
* notifications sent from ACPI via the SAN interface by providing them to any
* registered external driver.
*
- * Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
*/
#include <asm/unaligned.h>
@@ -37,6 +37,7 @@ struct san_data {
#define to_san_data(ptr, member) \
container_of(ptr, struct san_data, member)
+static struct workqueue_struct *san_wq;
/* -- dGPU notifier interface. ---------------------------------------------- */
@@ -356,7 +357,7 @@ static u32 san_evt_bat_nf(struct ssam_event_notifier *nf,
memcpy(&work->event, event, sizeof(struct ssam_event) + event->length);
- schedule_delayed_work(&work->work, delay);
+ queue_delayed_work(san_wq, &work->work, delay);
return SSAM_NOTIF_HANDLED;
}
@@ -861,7 +862,7 @@ static int san_remove(struct platform_device *pdev)
* We have unregistered our event sources. Now we need to ensure that
* all delayed works they may have spawned are run to completion.
*/
- flush_scheduled_work();
+ flush_workqueue(san_wq);
return 0;
}
@@ -881,7 +882,27 @@ static struct platform_driver surface_acpi_notify = {
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
};
-module_platform_driver(surface_acpi_notify);
+
+static int __init san_init(void)
+{
+ int ret;
+
+ san_wq = alloc_workqueue("san_wq", 0, 0);
+ if (!san_wq)
+ return -ENOMEM;
+ ret = platform_driver_register(&surface_acpi_notify);
+ if (ret)
+ destroy_workqueue(san_wq);
+ return ret;
+}
+module_init(san_init);
+
+static void __exit san_exit(void)
+{
+ platform_driver_unregister(&surface_acpi_notify);
+ destroy_workqueue(san_wq);
+}
+module_exit(san_exit);
MODULE_AUTHOR("Maximilian Luz <luzmaximilian@gmail.com>");
MODULE_DESCRIPTION("Surface ACPI Notify driver for Surface System Aggregator Module");
diff --git a/drivers/platform/surface/surface_aggregator_cdev.c b/drivers/platform/surface/surface_aggregator_cdev.c
index 30fb50fde450..492c82e69182 100644
--- a/drivers/platform/surface/surface_aggregator_cdev.c
+++ b/drivers/platform/surface/surface_aggregator_cdev.c
@@ -3,7 +3,7 @@
* Provides user-space access to the SSAM EC via the /dev/surface/aggregator
* misc device. Intended for debugging and development.
*
- * Copyright (C) 2020-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2020-2022 Maximilian Luz <luzmaximilian@gmail.com>
*/
#include <linux/fs.h>
diff --git a/drivers/platform/surface/surface_aggregator_hub.c b/drivers/platform/surface/surface_aggregator_hub.c
new file mode 100644
index 000000000000..43061514be38
--- /dev/null
+++ b/drivers/platform/surface/surface_aggregator_hub.c
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Surface System Aggregator Module (SSAM) subsystem device hubs.
+ *
+ * Provides a driver for SSAM subsystems device hubs. This driver performs
+ * instantiation of the devices managed by said hubs and takes care of
+ * (hot-)removal.
+ *
+ * Copyright (C) 2020-2022 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/limits.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include <linux/surface_aggregator/device.h>
+
+
+/* -- SSAM generic subsystem hub driver framework. -------------------------- */
+
+enum ssam_hub_state {
+ SSAM_HUB_UNINITIALIZED, /* Only set during initialization. */
+ SSAM_HUB_CONNECTED,
+ SSAM_HUB_DISCONNECTED,
+};
+
+enum ssam_hub_flags {
+ SSAM_HUB_HOT_REMOVED,
+};
+
+struct ssam_hub;
+
+struct ssam_hub_ops {
+ int (*get_state)(struct ssam_hub *hub, enum ssam_hub_state *state);
+};
+
+struct ssam_hub {
+ struct ssam_device *sdev;
+
+ enum ssam_hub_state state;
+ unsigned long flags;
+
+ struct delayed_work update_work;
+ unsigned long connect_delay;
+
+ struct ssam_event_notifier notif;
+ struct ssam_hub_ops ops;
+};
+
+struct ssam_hub_desc {
+ struct {
+ struct ssam_event_registry reg;
+ struct ssam_event_id id;
+ enum ssam_event_mask mask;
+ } event;
+
+ struct {
+ u32 (*notify)(struct ssam_event_notifier *nf, const struct ssam_event *event);
+ int (*get_state)(struct ssam_hub *hub, enum ssam_hub_state *state);
+ } ops;
+
+ unsigned long connect_delay_ms;
+};
+
+static void ssam_hub_update_workfn(struct work_struct *work)
+{
+ struct ssam_hub *hub = container_of(work, struct ssam_hub, update_work.work);
+ enum ssam_hub_state state;
+ int status = 0;
+
+ status = hub->ops.get_state(hub, &state);
+ if (status)
+ return;
+
+ /*
+ * There is a small possibility that hub devices were hot-removed and
+ * re-added before we were able to remove them here. In that case, both
+ * the state returned by get_state() and the state of the hub will
+ * equal SSAM_HUB_CONNECTED and we would bail early below, which would
+ * leave child devices without proper (re-)initialization and the
+ * hot-remove flag set.
+ *
+ * Therefore, we check whether devices have been hot-removed via an
+ * additional flag on the hub and, in this case, override the returned
+ * hub state. In case of a missed disconnect (i.e. get_state returned
+ * "connected"), we further need to re-schedule this work (with the
+ * appropriate delay) as the actual connect work submission might have
+ * been merged with this one.
+ *
+ * This then leads to one of two cases: Either we submit an unnecessary
+ * work item (which will get ignored via either the queue or the state
+ * checks) or, in the unlikely case that the work is actually required,
+ * double the normal connect delay.
+ */
+ if (test_and_clear_bit(SSAM_HUB_HOT_REMOVED, &hub->flags)) {
+ if (state == SSAM_HUB_CONNECTED)
+ schedule_delayed_work(&hub->update_work, hub->connect_delay);
+
+ state = SSAM_HUB_DISCONNECTED;
+ }
+
+ if (hub->state == state)
+ return;
+ hub->state = state;
+
+ if (hub->state == SSAM_HUB_CONNECTED)
+ status = ssam_device_register_clients(hub->sdev);
+ else
+ ssam_remove_clients(&hub->sdev->dev);
+
+ if (status)
+ dev_err(&hub->sdev->dev, "failed to update hub child devices: %d\n", status);
+}
+
+static int ssam_hub_mark_hot_removed(struct device *dev, void *_data)
+{
+ struct ssam_device *sdev = to_ssam_device(dev);
+
+ if (is_ssam_device(dev))
+ ssam_device_mark_hot_removed(sdev);
+
+ return 0;
+}
+
+static void ssam_hub_update(struct ssam_hub *hub, bool connected)
+{
+ unsigned long delay;
+
+ /* Mark devices as hot-removed before we remove any. */
+ if (!connected) {
+ set_bit(SSAM_HUB_HOT_REMOVED, &hub->flags);
+ device_for_each_child_reverse(&hub->sdev->dev, NULL, ssam_hub_mark_hot_removed);
+ }
+
+ /*
+ * Delay update when the base/keyboard cover is being connected to give
+ * devices/EC some time to set up.
+ */
+ delay = connected ? hub->connect_delay : 0;
+
+ schedule_delayed_work(&hub->update_work, delay);
+}
+
+static int __maybe_unused ssam_hub_resume(struct device *dev)
+{
+ struct ssam_hub *hub = dev_get_drvdata(dev);
+
+ schedule_delayed_work(&hub->update_work, 0);
+ return 0;
+}
+static SIMPLE_DEV_PM_OPS(ssam_hub_pm_ops, NULL, ssam_hub_resume);
+
+static int ssam_hub_probe(struct ssam_device *sdev)
+{
+ const struct ssam_hub_desc *desc;
+ struct ssam_hub *hub;
+ int status;
+
+ desc = ssam_device_get_match_data(sdev);
+ if (!desc) {
+ WARN(1, "no driver match data specified");
+ return -EINVAL;
+ }
+
+ hub = devm_kzalloc(&sdev->dev, sizeof(*hub), GFP_KERNEL);
+ if (!hub)
+ return -ENOMEM;
+
+ hub->sdev = sdev;
+ hub->state = SSAM_HUB_UNINITIALIZED;
+
+ hub->notif.base.priority = INT_MAX; /* This notifier should run first. */
+ hub->notif.base.fn = desc->ops.notify;
+ hub->notif.event.reg = desc->event.reg;
+ hub->notif.event.id = desc->event.id;
+ hub->notif.event.mask = desc->event.mask;
+ hub->notif.event.flags = SSAM_EVENT_SEQUENCED;
+
+ hub->connect_delay = msecs_to_jiffies(desc->connect_delay_ms);
+ hub->ops.get_state = desc->ops.get_state;
+
+ INIT_DELAYED_WORK(&hub->update_work, ssam_hub_update_workfn);
+
+ ssam_device_set_drvdata(sdev, hub);
+
+ status = ssam_device_notifier_register(sdev, &hub->notif);
+ if (status)
+ return status;
+
+ schedule_delayed_work(&hub->update_work, 0);
+ return 0;
+}
+
+static void ssam_hub_remove(struct ssam_device *sdev)
+{
+ struct ssam_hub *hub = ssam_device_get_drvdata(sdev);
+
+ ssam_device_notifier_unregister(sdev, &hub->notif);
+ cancel_delayed_work_sync(&hub->update_work);
+ ssam_remove_clients(&sdev->dev);
+}
+
+
+/* -- SSAM base-subsystem hub driver. --------------------------------------- */
+
+/*
+ * Some devices (especially battery) may need a bit of time to be fully usable
+ * after being (re-)connected. This delay has been determined via
+ * experimentation.
+ */
+#define SSAM_BASE_UPDATE_CONNECT_DELAY 2500
+
+SSAM_DEFINE_SYNC_REQUEST_R(ssam_bas_query_opmode, u8, {
+ .target_category = SSAM_SSH_TC_BAS,
+ .target_id = 0x01,
+ .command_id = 0x0d,
+ .instance_id = 0x00,
+});
+
+#define SSAM_BAS_OPMODE_TABLET 0x00
+#define SSAM_EVENT_BAS_CID_CONNECTION 0x0c
+
+static int ssam_base_hub_query_state(struct ssam_hub *hub, enum ssam_hub_state *state)
+{
+ u8 opmode;
+ int status;
+
+ status = ssam_retry(ssam_bas_query_opmode, hub->sdev->ctrl, &opmode);
+ if (status < 0) {
+ dev_err(&hub->sdev->dev, "failed to query base state: %d\n", status);
+ return status;
+ }
+
+ if (opmode != SSAM_BAS_OPMODE_TABLET)
+ *state = SSAM_HUB_CONNECTED;
+ else
+ *state = SSAM_HUB_DISCONNECTED;
+
+ return 0;
+}
+
+static u32 ssam_base_hub_notif(struct ssam_event_notifier *nf, const struct ssam_event *event)
+{
+ struct ssam_hub *hub = container_of(nf, struct ssam_hub, notif);
+
+ if (event->command_id != SSAM_EVENT_BAS_CID_CONNECTION)
+ return 0;
+
+ if (event->length < 1) {
+ dev_err(&hub->sdev->dev, "unexpected payload size: %u\n", event->length);
+ return 0;
+ }
+
+ ssam_hub_update(hub, event->data[0]);
+
+ /*
+ * Do not return SSAM_NOTIF_HANDLED: The event should be picked up and
+ * consumed by the detachment system driver. We're just a (more or less)
+ * silent observer.
+ */
+ return 0;
+}
+
+static const struct ssam_hub_desc base_hub = {
+ .event = {
+ .reg = SSAM_EVENT_REGISTRY_SAM,
+ .id = {
+ .target_category = SSAM_SSH_TC_BAS,
+ .instance = 0,
+ },
+ .mask = SSAM_EVENT_MASK_NONE,
+ },
+ .ops = {
+ .notify = ssam_base_hub_notif,
+ .get_state = ssam_base_hub_query_state,
+ },
+ .connect_delay_ms = SSAM_BASE_UPDATE_CONNECT_DELAY,
+};
+
+
+/* -- SSAM KIP-subsystem hub driver. ---------------------------------------- */
+
+/*
+ * Some devices may need a bit of time to be fully usable after being
+ * (re-)connected. This delay has been determined via experimentation.
+ */
+#define SSAM_KIP_UPDATE_CONNECT_DELAY 250
+
+#define SSAM_EVENT_KIP_CID_CONNECTION 0x2c
+
+SSAM_DEFINE_SYNC_REQUEST_R(__ssam_kip_query_state, u8, {
+ .target_category = SSAM_SSH_TC_KIP,
+ .target_id = 0x01,
+ .command_id = 0x2c,
+ .instance_id = 0x00,
+});
+
+static int ssam_kip_hub_query_state(struct ssam_hub *hub, enum ssam_hub_state *state)
+{
+ int status;
+ u8 connected;
+
+ status = ssam_retry(__ssam_kip_query_state, hub->sdev->ctrl, &connected);
+ if (status < 0) {
+ dev_err(&hub->sdev->dev, "failed to query KIP connection state: %d\n", status);
+ return status;
+ }
+
+ *state = connected ? SSAM_HUB_CONNECTED : SSAM_HUB_DISCONNECTED;
+ return 0;
+}
+
+static u32 ssam_kip_hub_notif(struct ssam_event_notifier *nf, const struct ssam_event *event)
+{
+ struct ssam_hub *hub = container_of(nf, struct ssam_hub, notif);
+
+ if (event->command_id != SSAM_EVENT_KIP_CID_CONNECTION)
+ return 0; /* Return "unhandled". */
+
+ if (event->length < 1) {
+ dev_err(&hub->sdev->dev, "unexpected payload size: %u\n", event->length);
+ return 0;
+ }
+
+ ssam_hub_update(hub, event->data[0]);
+ return SSAM_NOTIF_HANDLED;
+}
+
+static const struct ssam_hub_desc kip_hub = {
+ .event = {
+ .reg = SSAM_EVENT_REGISTRY_SAM,
+ .id = {
+ .target_category = SSAM_SSH_TC_KIP,
+ .instance = 0,
+ },
+ .mask = SSAM_EVENT_MASK_TARGET,
+ },
+ .ops = {
+ .notify = ssam_kip_hub_notif,
+ .get_state = ssam_kip_hub_query_state,
+ },
+ .connect_delay_ms = SSAM_KIP_UPDATE_CONNECT_DELAY,
+};
+
+
+/* -- Driver registration. -------------------------------------------------- */
+
+static const struct ssam_device_id ssam_hub_match[] = {
+ { SSAM_VDEV(HUB, 0x01, SSAM_SSH_TC_KIP, 0x00), (unsigned long)&kip_hub },
+ { SSAM_VDEV(HUB, 0x02, SSAM_SSH_TC_BAS, 0x00), (unsigned long)&base_hub },
+ { }
+};
+MODULE_DEVICE_TABLE(ssam, ssam_hub_match);
+
+static struct ssam_device_driver ssam_subsystem_hub_driver = {
+ .probe = ssam_hub_probe,
+ .remove = ssam_hub_remove,
+ .match_table = ssam_hub_match,
+ .driver = {
+ .name = "surface_aggregator_subsystem_hub",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ .pm = &ssam_hub_pm_ops,
+ },
+};
+module_ssam_device_driver(ssam_subsystem_hub_driver);
+
+MODULE_AUTHOR("Maximilian Luz <luzmaximilian@gmail.com>");
+MODULE_DESCRIPTION("Subsystem device hub driver for Surface System Aggregator Module");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index ce2bd88feeaa..d5655f6a4a41 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -6,19 +6,16 @@
* cannot be auto-detected. Provides device-hubs and performs instantiation
* for these devices.
*
- * Copyright (C) 2020-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2020-2022 Maximilian Luz <luzmaximilian@gmail.com>
*/
#include <linux/acpi.h>
#include <linux/kernel.h>
-#include <linux/limits.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/types.h>
-#include <linux/workqueue.h>
-#include <linux/surface_aggregator/controller.h>
#include <linux/surface_aggregator/device.h>
@@ -41,9 +38,15 @@ static const struct software_node ssam_node_root = {
.name = "ssam_platform_hub",
};
+/* KIP device hub (connects keyboard cover devices on Surface Pro 8). */
+static const struct software_node ssam_node_hub_kip = {
+ .name = "ssam:00:00:01:0e:00",
+ .parent = &ssam_node_root,
+};
+
/* Base device hub (devices attached to Surface Book 3 base). */
static const struct software_node ssam_node_hub_base = {
- .name = "ssam:00:00:02:00:00",
+ .name = "ssam:00:00:02:11:00",
.parent = &ssam_node_root,
};
@@ -71,6 +74,12 @@ static const struct software_node ssam_node_tmp_pprof = {
.parent = &ssam_node_root,
};
+/* Tablet-mode switch via KIP subsystem. */
+static const struct software_node ssam_node_kip_tablet_switch = {
+ .name = "ssam:01:0e:01:00:01",
+ .parent = &ssam_node_root,
+};
+
/* DTX / detachment-system device (Surface Book 3). */
static const struct software_node ssam_node_bas_dtx = {
.name = "ssam:01:11:01:00:00",
@@ -155,6 +164,36 @@ static const struct software_node ssam_node_hid_base_iid6 = {
.parent = &ssam_node_hub_base,
};
+/* HID keyboard (KIP hub). */
+static const struct software_node ssam_node_hid_kip_keyboard = {
+ .name = "ssam:01:15:02:01:00",
+ .parent = &ssam_node_hub_kip,
+};
+
+/* HID pen stash (KIP hub; pen taken / stashed away evens). */
+static const struct software_node ssam_node_hid_kip_penstash = {
+ .name = "ssam:01:15:02:02:00",
+ .parent = &ssam_node_hub_kip,
+};
+
+/* HID touchpad (KIP hub). */
+static const struct software_node ssam_node_hid_kip_touchpad = {
+ .name = "ssam:01:15:02:03:00",
+ .parent = &ssam_node_hub_kip,
+};
+
+/* HID device instance 5 (KIP hub, unknown HID device). */
+static const struct software_node ssam_node_hid_kip_iid5 = {
+ .name = "ssam:01:15:02:05:00",
+ .parent = &ssam_node_hub_kip,
+};
+
+/* Tablet-mode switch via POS subsystem. */
+static const struct software_node ssam_node_pos_tablet_switch = {
+ .name = "ssam:01:26:01:00:01",
+ .parent = &ssam_node_root,
+};
+
/*
* Devices for 5th- and 6th-generations models:
* - Surface Book 2,
@@ -201,6 +240,7 @@ static const struct software_node *ssam_node_group_sls[] = {
&ssam_node_bat_ac,
&ssam_node_bat_main,
&ssam_node_tmp_pprof,
+ &ssam_node_pos_tablet_switch,
&ssam_node_hid_tid1_keyboard,
&ssam_node_hid_tid1_penstash,
&ssam_node_hid_tid1_touchpad,
@@ -230,289 +270,18 @@ static const struct software_node *ssam_node_group_sp7[] = {
static const struct software_node *ssam_node_group_sp8[] = {
&ssam_node_root,
+ &ssam_node_hub_kip,
&ssam_node_bat_ac,
&ssam_node_bat_main,
&ssam_node_tmp_pprof,
- /* TODO: Add support for keyboard cover. */
- NULL,
-};
-
-
-/* -- Device registry helper functions. ------------------------------------- */
-
-static int ssam_uid_from_string(const char *str, struct ssam_device_uid *uid)
-{
- u8 d, tc, tid, iid, fn;
- int n;
-
- n = sscanf(str, "ssam:%hhx:%hhx:%hhx:%hhx:%hhx", &d, &tc, &tid, &iid, &fn);
- if (n != 5)
- return -EINVAL;
-
- uid->domain = d;
- uid->category = tc;
- uid->target = tid;
- uid->instance = iid;
- uid->function = fn;
-
- return 0;
-}
-
-static int ssam_hub_add_device(struct device *parent, struct ssam_controller *ctrl,
- struct fwnode_handle *node)
-{
- struct ssam_device_uid uid;
- struct ssam_device *sdev;
- int status;
-
- status = ssam_uid_from_string(fwnode_get_name(node), &uid);
- if (status)
- return status;
-
- sdev = ssam_device_alloc(ctrl, uid);
- if (!sdev)
- return -ENOMEM;
-
- sdev->dev.parent = parent;
- sdev->dev.fwnode = node;
-
- status = ssam_device_add(sdev);
- if (status)
- ssam_device_put(sdev);
-
- return status;
-}
-
-static int ssam_hub_register_clients(struct device *parent, struct ssam_controller *ctrl,
- struct fwnode_handle *node)
-{
- struct fwnode_handle *child;
- int status;
-
- fwnode_for_each_child_node(node, child) {
- /*
- * Try to add the device specified in the firmware node. If
- * this fails with -EINVAL, the node does not specify any SSAM
- * device, so ignore it and continue with the next one.
- */
-
- status = ssam_hub_add_device(parent, ctrl, child);
- if (status && status != -EINVAL)
- goto err;
- }
-
- return 0;
-err:
- ssam_remove_clients(parent);
- return status;
-}
-
-
-/* -- SSAM base-hub driver. ------------------------------------------------- */
-
-/*
- * Some devices (especially battery) may need a bit of time to be fully usable
- * after being (re-)connected. This delay has been determined via
- * experimentation.
- */
-#define SSAM_BASE_UPDATE_CONNECT_DELAY msecs_to_jiffies(2500)
-
-enum ssam_base_hub_state {
- SSAM_BASE_HUB_UNINITIALIZED,
- SSAM_BASE_HUB_CONNECTED,
- SSAM_BASE_HUB_DISCONNECTED,
-};
-
-struct ssam_base_hub {
- struct ssam_device *sdev;
-
- enum ssam_base_hub_state state;
- struct delayed_work update_work;
-
- struct ssam_event_notifier notif;
-};
-
-SSAM_DEFINE_SYNC_REQUEST_R(ssam_bas_query_opmode, u8, {
- .target_category = SSAM_SSH_TC_BAS,
- .target_id = 0x01,
- .command_id = 0x0d,
- .instance_id = 0x00,
-});
-
-#define SSAM_BAS_OPMODE_TABLET 0x00
-#define SSAM_EVENT_BAS_CID_CONNECTION 0x0c
-
-static int ssam_base_hub_query_state(struct ssam_base_hub *hub, enum ssam_base_hub_state *state)
-{
- u8 opmode;
- int status;
-
- status = ssam_retry(ssam_bas_query_opmode, hub->sdev->ctrl, &opmode);
- if (status < 0) {
- dev_err(&hub->sdev->dev, "failed to query base state: %d\n", status);
- return status;
- }
-
- if (opmode != SSAM_BAS_OPMODE_TABLET)
- *state = SSAM_BASE_HUB_CONNECTED;
- else
- *state = SSAM_BASE_HUB_DISCONNECTED;
-
- return 0;
-}
-
-static ssize_t ssam_base_hub_state_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct ssam_base_hub *hub = dev_get_drvdata(dev);
- bool connected = hub->state == SSAM_BASE_HUB_CONNECTED;
-
- return sysfs_emit(buf, "%d\n", connected);
-}
-
-static struct device_attribute ssam_base_hub_attr_state =
- __ATTR(state, 0444, ssam_base_hub_state_show, NULL);
-
-static struct attribute *ssam_base_hub_attrs[] = {
- &ssam_base_hub_attr_state.attr,
+ &ssam_node_kip_tablet_switch,
+ &ssam_node_hid_kip_keyboard,
+ &ssam_node_hid_kip_penstash,
+ &ssam_node_hid_kip_touchpad,
+ &ssam_node_hid_kip_iid5,
NULL,
};
-static const struct attribute_group ssam_base_hub_group = {
- .attrs = ssam_base_hub_attrs,
-};
-
-static void ssam_base_hub_update_workfn(struct work_struct *work)
-{
- struct ssam_base_hub *hub = container_of(work, struct ssam_base_hub, update_work.work);
- struct fwnode_handle *node = dev_fwnode(&hub->sdev->dev);
- enum ssam_base_hub_state state;
- int status = 0;
-
- status = ssam_base_hub_query_state(hub, &state);
- if (status)
- return;
-
- if (hub->state == state)
- return;
- hub->state = state;
-
- if (hub->state == SSAM_BASE_HUB_CONNECTED)
- status = ssam_hub_register_clients(&hub->sdev->dev, hub->sdev->ctrl, node);
- else
- ssam_remove_clients(&hub->sdev->dev);
-
- if (status)
- dev_err(&hub->sdev->dev, "failed to update base-hub devices: %d\n", status);
-}
-
-static u32 ssam_base_hub_notif(struct ssam_event_notifier *nf, const struct ssam_event *event)
-{
- struct ssam_base_hub *hub = container_of(nf, struct ssam_base_hub, notif);
- unsigned long delay;
-
- if (event->command_id != SSAM_EVENT_BAS_CID_CONNECTION)
- return 0;
-
- if (event->length < 1) {
- dev_err(&hub->sdev->dev, "unexpected payload size: %u\n", event->length);
- return 0;
- }
-
- /*
- * Delay update when the base is being connected to give devices/EC
- * some time to set up.
- */
- delay = event->data[0] ? SSAM_BASE_UPDATE_CONNECT_DELAY : 0;
-
- schedule_delayed_work(&hub->update_work, delay);
-
- /*
- * Do not return SSAM_NOTIF_HANDLED: The event should be picked up and
- * consumed by the detachment system driver. We're just a (more or less)
- * silent observer.
- */
- return 0;
-}
-
-static int __maybe_unused ssam_base_hub_resume(struct device *dev)
-{
- struct ssam_base_hub *hub = dev_get_drvdata(dev);
-
- schedule_delayed_work(&hub->update_work, 0);
- return 0;
-}
-static SIMPLE_DEV_PM_OPS(ssam_base_hub_pm_ops, NULL, ssam_base_hub_resume);
-
-static int ssam_base_hub_probe(struct ssam_device *sdev)
-{
- struct ssam_base_hub *hub;
- int status;
-
- hub = devm_kzalloc(&sdev->dev, sizeof(*hub), GFP_KERNEL);
- if (!hub)
- return -ENOMEM;
-
- hub->sdev = sdev;
- hub->state = SSAM_BASE_HUB_UNINITIALIZED;
-
- hub->notif.base.priority = INT_MAX; /* This notifier should run first. */
- hub->notif.base.fn = ssam_base_hub_notif;
- hub->notif.event.reg = SSAM_EVENT_REGISTRY_SAM;
- hub->notif.event.id.target_category = SSAM_SSH_TC_BAS,
- hub->notif.event.id.instance = 0,
- hub->notif.event.mask = SSAM_EVENT_MASK_NONE;
- hub->notif.event.flags = SSAM_EVENT_SEQUENCED;
-
- INIT_DELAYED_WORK(&hub->update_work, ssam_base_hub_update_workfn);
-
- ssam_device_set_drvdata(sdev, hub);
-
- status = ssam_notifier_register(sdev->ctrl, &hub->notif);
- if (status)
- return status;
-
- status = sysfs_create_group(&sdev->dev.kobj, &ssam_base_hub_group);
- if (status)
- goto err;
-
- schedule_delayed_work(&hub->update_work, 0);
- return 0;
-
-err:
- ssam_notifier_unregister(sdev->ctrl, &hub->notif);
- cancel_delayed_work_sync(&hub->update_work);
- ssam_remove_clients(&sdev->dev);
- return status;
-}
-
-static void ssam_base_hub_remove(struct ssam_device *sdev)
-{
- struct ssam_base_hub *hub = ssam_device_get_drvdata(sdev);
-
- sysfs_remove_group(&sdev->dev.kobj, &ssam_base_hub_group);
-
- ssam_notifier_unregister(sdev->ctrl, &hub->notif);
- cancel_delayed_work_sync(&hub->update_work);
- ssam_remove_clients(&sdev->dev);
-}
-
-static const struct ssam_device_id ssam_base_hub_match[] = {
- { SSAM_VDEV(HUB, 0x02, SSAM_ANY_IID, 0x00) },
- { },
-};
-
-static struct ssam_device_driver ssam_base_hub_driver = {
- .probe = ssam_base_hub_probe,
- .remove = ssam_base_hub_remove,
- .match_table = ssam_base_hub_match,
- .driver = {
- .name = "surface_aggregator_base_hub",
- .probe_type = PROBE_PREFER_ASYNCHRONOUS,
- .pm = &ssam_base_hub_pm_ops,
- },
-};
-
/* -- SSAM platform/meta-hub driver. ---------------------------------------- */
@@ -597,7 +366,7 @@ static int ssam_platform_hub_probe(struct platform_device *pdev)
set_secondary_fwnode(&pdev->dev, root);
- status = ssam_hub_register_clients(&pdev->dev, ctrl, root);
+ status = __ssam_register_clients(&pdev->dev, ctrl, root);
if (status) {
set_secondary_fwnode(&pdev->dev, NULL);
software_node_unregister_node_group(nodes);
@@ -626,32 +395,7 @@ static struct platform_driver ssam_platform_hub_driver = {
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
};
-
-
-/* -- Module initialization. ------------------------------------------------ */
-
-static int __init ssam_device_hub_init(void)
-{
- int status;
-
- status = platform_driver_register(&ssam_platform_hub_driver);
- if (status)
- return status;
-
- status = ssam_device_driver_register(&ssam_base_hub_driver);
- if (status)
- platform_driver_unregister(&ssam_platform_hub_driver);
-
- return status;
-}
-module_init(ssam_device_hub_init);
-
-static void __exit ssam_device_hub_exit(void)
-{
- ssam_device_driver_unregister(&ssam_base_hub_driver);
- platform_driver_unregister(&ssam_platform_hub_driver);
-}
-module_exit(ssam_device_hub_exit);
+module_platform_driver(ssam_platform_hub_driver);
MODULE_AUTHOR("Maximilian Luz <luzmaximilian@gmail.com>");
MODULE_DESCRIPTION("Device-registry for Surface System Aggregator Module");
diff --git a/drivers/platform/surface/surface_aggregator_tabletsw.c b/drivers/platform/surface/surface_aggregator_tabletsw.c
new file mode 100644
index 000000000000..27d95a6a7851
--- /dev/null
+++ b/drivers/platform/surface/surface_aggregator_tabletsw.c
@@ -0,0 +1,533 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Surface System Aggregator Module (SSAM) tablet mode switch driver.
+ *
+ * Copyright (C) 2022 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#include <asm/unaligned.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include <linux/surface_aggregator/controller.h>
+#include <linux/surface_aggregator/device.h>
+
+
+/* -- SSAM generic tablet switch driver framework. -------------------------- */
+
+struct ssam_tablet_sw;
+
+struct ssam_tablet_sw_ops {
+ int (*get_state)(struct ssam_tablet_sw *sw, u32 *state);
+ const char *(*state_name)(struct ssam_tablet_sw *sw, u32 state);
+ bool (*state_is_tablet_mode)(struct ssam_tablet_sw *sw, u32 state);
+};
+
+struct ssam_tablet_sw {
+ struct ssam_device *sdev;
+
+ u32 state;
+ struct work_struct update_work;
+ struct input_dev *mode_switch;
+
+ struct ssam_tablet_sw_ops ops;
+ struct ssam_event_notifier notif;
+};
+
+struct ssam_tablet_sw_desc {
+ struct {
+ const char *name;
+ const char *phys;
+ } dev;
+
+ struct {
+ u32 (*notify)(struct ssam_event_notifier *nf, const struct ssam_event *event);
+ int (*get_state)(struct ssam_tablet_sw *sw, u32 *state);
+ const char *(*state_name)(struct ssam_tablet_sw *sw, u32 state);
+ bool (*state_is_tablet_mode)(struct ssam_tablet_sw *sw, u32 state);
+ } ops;
+
+ struct {
+ struct ssam_event_registry reg;
+ struct ssam_event_id id;
+ enum ssam_event_mask mask;
+ u8 flags;
+ } event;
+};
+
+static ssize_t state_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct ssam_tablet_sw *sw = dev_get_drvdata(dev);
+ const char *state = sw->ops.state_name(sw, sw->state);
+
+ return sysfs_emit(buf, "%s\n", state);
+}
+static DEVICE_ATTR_RO(state);
+
+static struct attribute *ssam_tablet_sw_attrs[] = {
+ &dev_attr_state.attr,
+ NULL,
+};
+
+static const struct attribute_group ssam_tablet_sw_group = {
+ .attrs = ssam_tablet_sw_attrs,
+};
+
+static void ssam_tablet_sw_update_workfn(struct work_struct *work)
+{
+ struct ssam_tablet_sw *sw = container_of(work, struct ssam_tablet_sw, update_work);
+ int tablet, status;
+ u32 state;
+
+ status = sw->ops.get_state(sw, &state);
+ if (status)
+ return;
+
+ if (sw->state == state)
+ return;
+ sw->state = state;
+
+ /* Send SW_TABLET_MODE event. */
+ tablet = sw->ops.state_is_tablet_mode(sw, state);
+ input_report_switch(sw->mode_switch, SW_TABLET_MODE, tablet);
+ input_sync(sw->mode_switch);
+}
+
+static int __maybe_unused ssam_tablet_sw_resume(struct device *dev)
+{
+ struct ssam_tablet_sw *sw = dev_get_drvdata(dev);
+
+ schedule_work(&sw->update_work);
+ return 0;
+}
+static SIMPLE_DEV_PM_OPS(ssam_tablet_sw_pm_ops, NULL, ssam_tablet_sw_resume);
+
+static int ssam_tablet_sw_probe(struct ssam_device *sdev)
+{
+ const struct ssam_tablet_sw_desc *desc;
+ struct ssam_tablet_sw *sw;
+ int tablet, status;
+
+ desc = ssam_device_get_match_data(sdev);
+ if (!desc) {
+ WARN(1, "no driver match data specified");
+ return -EINVAL;
+ }
+
+ sw = devm_kzalloc(&sdev->dev, sizeof(*sw), GFP_KERNEL);
+ if (!sw)
+ return -ENOMEM;
+
+ sw->sdev = sdev;
+
+ sw->ops.get_state = desc->ops.get_state;
+ sw->ops.state_name = desc->ops.state_name;
+ sw->ops.state_is_tablet_mode = desc->ops.state_is_tablet_mode;
+
+ INIT_WORK(&sw->update_work, ssam_tablet_sw_update_workfn);
+
+ ssam_device_set_drvdata(sdev, sw);
+
+ /* Get initial state. */
+ status = sw->ops.get_state(sw, &sw->state);
+ if (status)
+ return status;
+
+ /* Set up tablet mode switch. */
+ sw->mode_switch = devm_input_allocate_device(&sdev->dev);
+ if (!sw->mode_switch)
+ return -ENOMEM;
+
+ sw->mode_switch->name = desc->dev.name;
+ sw->mode_switch->phys = desc->dev.phys;
+ sw->mode_switch->id.bustype = BUS_HOST;
+ sw->mode_switch->dev.parent = &sdev->dev;
+
+ tablet = sw->ops.state_is_tablet_mode(sw, sw->state);
+ input_set_capability(sw->mode_switch, EV_SW, SW_TABLET_MODE);
+ input_report_switch(sw->mode_switch, SW_TABLET_MODE, tablet);
+
+ status = input_register_device(sw->mode_switch);
+ if (status)
+ return status;
+
+ /* Set up notifier. */
+ sw->notif.base.priority = 0;
+ sw->notif.base.fn = desc->ops.notify;
+ sw->notif.event.reg = desc->event.reg;
+ sw->notif.event.id = desc->event.id;
+ sw->notif.event.mask = desc->event.mask;
+ sw->notif.event.flags = SSAM_EVENT_SEQUENCED;
+
+ status = ssam_device_notifier_register(sdev, &sw->notif);
+ if (status)
+ return status;
+
+ status = sysfs_create_group(&sdev->dev.kobj, &ssam_tablet_sw_group);
+ if (status)
+ goto err;
+
+ /* We might have missed events during setup, so check again. */
+ schedule_work(&sw->update_work);
+ return 0;
+
+err:
+ ssam_device_notifier_unregister(sdev, &sw->notif);
+ cancel_work_sync(&sw->update_work);
+ return status;
+}
+
+static void ssam_tablet_sw_remove(struct ssam_device *sdev)
+{
+ struct ssam_tablet_sw *sw = ssam_device_get_drvdata(sdev);
+
+ sysfs_remove_group(&sdev->dev.kobj, &ssam_tablet_sw_group);
+
+ ssam_device_notifier_unregister(sdev, &sw->notif);
+ cancel_work_sync(&sw->update_work);
+}
+
+
+/* -- SSAM KIP tablet switch implementation. -------------------------------- */
+
+#define SSAM_EVENT_KIP_CID_COVER_STATE_CHANGED 0x1d
+
+enum ssam_kip_cover_state {
+ SSAM_KIP_COVER_STATE_DISCONNECTED = 0x01,
+ SSAM_KIP_COVER_STATE_CLOSED = 0x02,
+ SSAM_KIP_COVER_STATE_LAPTOP = 0x03,
+ SSAM_KIP_COVER_STATE_FOLDED_CANVAS = 0x04,
+ SSAM_KIP_COVER_STATE_FOLDED_BACK = 0x05,
+};
+
+static const char *ssam_kip_cover_state_name(struct ssam_tablet_sw *sw, u32 state)
+{
+ switch (state) {
+ case SSAM_KIP_COVER_STATE_DISCONNECTED:
+ return "disconnected";
+
+ case SSAM_KIP_COVER_STATE_CLOSED:
+ return "closed";
+
+ case SSAM_KIP_COVER_STATE_LAPTOP:
+ return "laptop";
+
+ case SSAM_KIP_COVER_STATE_FOLDED_CANVAS:
+ return "folded-canvas";
+
+ case SSAM_KIP_COVER_STATE_FOLDED_BACK:
+ return "folded-back";
+
+ default:
+ dev_warn(&sw->sdev->dev, "unknown KIP cover state: %u\n", state);
+ return "<unknown>";
+ }
+}
+
+static bool ssam_kip_cover_state_is_tablet_mode(struct ssam_tablet_sw *sw, u32 state)
+{
+ switch (state) {
+ case SSAM_KIP_COVER_STATE_DISCONNECTED:
+ case SSAM_KIP_COVER_STATE_FOLDED_CANVAS:
+ case SSAM_KIP_COVER_STATE_FOLDED_BACK:
+ return true;
+
+ case SSAM_KIP_COVER_STATE_CLOSED:
+ case SSAM_KIP_COVER_STATE_LAPTOP:
+ return false;
+
+ default:
+ dev_warn(&sw->sdev->dev, "unknown KIP cover state: %d\n", sw->state);
+ return true;
+ }
+}
+
+SSAM_DEFINE_SYNC_REQUEST_R(__ssam_kip_get_cover_state, u8, {
+ .target_category = SSAM_SSH_TC_KIP,
+ .target_id = 0x01,
+ .command_id = 0x1d,
+ .instance_id = 0x00,
+});
+
+static int ssam_kip_get_cover_state(struct ssam_tablet_sw *sw, u32 *state)
+{
+ int status;
+ u8 raw;
+
+ status = ssam_retry(__ssam_kip_get_cover_state, sw->sdev->ctrl, &raw);
+ if (status < 0) {
+ dev_err(&sw->sdev->dev, "failed to query KIP lid state: %d\n", status);
+ return status;
+ }
+
+ *state = raw;
+ return 0;
+}
+
+static u32 ssam_kip_sw_notif(struct ssam_event_notifier *nf, const struct ssam_event *event)
+{
+ struct ssam_tablet_sw *sw = container_of(nf, struct ssam_tablet_sw, notif);
+
+ if (event->command_id != SSAM_EVENT_KIP_CID_COVER_STATE_CHANGED)
+ return 0; /* Return "unhandled". */
+
+ if (event->length < 1)
+ dev_warn(&sw->sdev->dev, "unexpected payload size: %u\n", event->length);
+
+ schedule_work(&sw->update_work);
+ return SSAM_NOTIF_HANDLED;
+}
+
+static const struct ssam_tablet_sw_desc ssam_kip_sw_desc = {
+ .dev = {
+ .name = "Microsoft Surface KIP Tablet Mode Switch",
+ .phys = "ssam/01:0e:01:00:01/input0",
+ },
+ .ops = {
+ .notify = ssam_kip_sw_notif,
+ .get_state = ssam_kip_get_cover_state,
+ .state_name = ssam_kip_cover_state_name,
+ .state_is_tablet_mode = ssam_kip_cover_state_is_tablet_mode,
+ },
+ .event = {
+ .reg = SSAM_EVENT_REGISTRY_SAM,
+ .id = {
+ .target_category = SSAM_SSH_TC_KIP,
+ .instance = 0,
+ },
+ .mask = SSAM_EVENT_MASK_TARGET,
+ },
+};
+
+
+/* -- SSAM POS tablet switch implementation. -------------------------------- */
+
+static bool tablet_mode_in_slate_state = true;
+module_param(tablet_mode_in_slate_state, bool, 0644);
+MODULE_PARM_DESC(tablet_mode_in_slate_state, "Enable tablet mode in slate device posture, default is 'true'");
+
+#define SSAM_EVENT_POS_CID_POSTURE_CHANGED 0x03
+#define SSAM_POS_MAX_SOURCES 4
+
+enum ssam_pos_state {
+ SSAM_POS_POSTURE_LID_CLOSED = 0x00,
+ SSAM_POS_POSTURE_LAPTOP = 0x01,
+ SSAM_POS_POSTURE_SLATE = 0x02,
+ SSAM_POS_POSTURE_TABLET = 0x03,
+};
+
+struct ssam_sources_list {
+ __le32 count;
+ __le32 id[SSAM_POS_MAX_SOURCES];
+} __packed;
+
+static const char *ssam_pos_state_name(struct ssam_tablet_sw *sw, u32 state)
+{
+ switch (state) {
+ case SSAM_POS_POSTURE_LID_CLOSED:
+ return "closed";
+
+ case SSAM_POS_POSTURE_LAPTOP:
+ return "laptop";
+
+ case SSAM_POS_POSTURE_SLATE:
+ return "slate";
+
+ case SSAM_POS_POSTURE_TABLET:
+ return "tablet";
+
+ default:
+ dev_warn(&sw->sdev->dev, "unknown device posture: %u\n", state);
+ return "<unknown>";
+ }
+}
+
+static bool ssam_pos_state_is_tablet_mode(struct ssam_tablet_sw *sw, u32 state)
+{
+ switch (state) {
+ case SSAM_POS_POSTURE_LAPTOP:
+ case SSAM_POS_POSTURE_LID_CLOSED:
+ return false;
+
+ case SSAM_POS_POSTURE_SLATE:
+ return tablet_mode_in_slate_state;
+
+ case SSAM_POS_POSTURE_TABLET:
+ return true;
+
+ default:
+ dev_warn(&sw->sdev->dev, "unknown device posture: %u\n", state);
+ return true;
+ }
+}
+
+static int ssam_pos_get_sources_list(struct ssam_tablet_sw *sw, struct ssam_sources_list *sources)
+{
+ struct ssam_request rqst;
+ struct ssam_response rsp;
+ int status;
+
+ rqst.target_category = SSAM_SSH_TC_POS;
+ rqst.target_id = 0x01;
+ rqst.command_id = 0x01;
+ rqst.instance_id = 0x00;
+ rqst.flags = SSAM_REQUEST_HAS_RESPONSE;
+ rqst.length = 0;
+ rqst.payload = NULL;
+
+ rsp.capacity = sizeof(*sources);
+ rsp.length = 0;
+ rsp.pointer = (u8 *)sources;
+
+ status = ssam_retry(ssam_request_sync_onstack, sw->sdev->ctrl, &rqst, &rsp, 0);
+ if (status)
+ return status;
+
+ /* We need at least the 'sources->count' field. */
+ if (rsp.length < sizeof(__le32)) {
+ dev_err(&sw->sdev->dev, "received source list response is too small\n");
+ return -EPROTO;
+ }
+
+ /* Make sure 'sources->count' matches with the response length. */
+ if (get_unaligned_le32(&sources->count) * sizeof(__le32) + sizeof(__le32) != rsp.length) {
+ dev_err(&sw->sdev->dev, "mismatch between number of sources and response size\n");
+ return -EPROTO;
+ }
+
+ return 0;
+}
+
+static int ssam_pos_get_source(struct ssam_tablet_sw *sw, u32 *source_id)
+{
+ struct ssam_sources_list sources = {};
+ int status;
+
+ status = ssam_pos_get_sources_list(sw, &sources);
+ if (status)
+ return status;
+
+ if (get_unaligned_le32(&sources.count) == 0) {
+ dev_err(&sw->sdev->dev, "no posture sources found\n");
+ return -ENODEV;
+ }
+
+ /*
+ * We currently don't know what to do with more than one posture
+ * source. At the moment, only one source seems to be used/provided.
+ * The WARN_ON() here should hopefully let us know quickly once there
+ * is a device that provides multiple sources, at which point we can
+ * then try to figure out how to handle them.
+ */
+ WARN_ON(get_unaligned_le32(&sources.count) > 1);
+
+ *source_id = get_unaligned_le32(&sources.id[0]);
+ return 0;
+}
+
+SSAM_DEFINE_SYNC_REQUEST_WR(__ssam_pos_get_posture_for_source, __le32, __le32, {
+ .target_category = SSAM_SSH_TC_POS,
+ .target_id = 0x01,
+ .command_id = 0x02,
+ .instance_id = 0x00,
+});
+
+static int ssam_pos_get_posture_for_source(struct ssam_tablet_sw *sw, u32 source_id, u32 *posture)
+{
+ __le32 source_le = cpu_to_le32(source_id);
+ __le32 rspval_le = 0;
+ int status;
+
+ status = ssam_retry(__ssam_pos_get_posture_for_source, sw->sdev->ctrl,
+ &source_le, &rspval_le);
+ if (status)
+ return status;
+
+ *posture = le32_to_cpu(rspval_le);
+ return 0;
+}
+
+static int ssam_pos_get_posture(struct ssam_tablet_sw *sw, u32 *state)
+{
+ u32 source_id;
+ int status;
+
+ status = ssam_pos_get_source(sw, &source_id);
+ if (status) {
+ dev_err(&sw->sdev->dev, "failed to get posture source ID: %d\n", status);
+ return status;
+ }
+
+ status = ssam_pos_get_posture_for_source(sw, source_id, state);
+ if (status) {
+ dev_err(&sw->sdev->dev, "failed to get posture value for source %u: %d\n",
+ source_id, status);
+ return status;
+ }
+
+ return 0;
+}
+
+static u32 ssam_pos_sw_notif(struct ssam_event_notifier *nf, const struct ssam_event *event)
+{
+ struct ssam_tablet_sw *sw = container_of(nf, struct ssam_tablet_sw, notif);
+
+ if (event->command_id != SSAM_EVENT_POS_CID_POSTURE_CHANGED)
+ return 0; /* Return "unhandled". */
+
+ if (event->length != sizeof(__le32) * 3)
+ dev_warn(&sw->sdev->dev, "unexpected payload size: %u\n", event->length);
+
+ schedule_work(&sw->update_work);
+ return SSAM_NOTIF_HANDLED;
+}
+
+static const struct ssam_tablet_sw_desc ssam_pos_sw_desc = {
+ .dev = {
+ .name = "Microsoft Surface POS Tablet Mode Switch",
+ .phys = "ssam/01:26:01:00:01/input0",
+ },
+ .ops = {
+ .notify = ssam_pos_sw_notif,
+ .get_state = ssam_pos_get_posture,
+ .state_name = ssam_pos_state_name,
+ .state_is_tablet_mode = ssam_pos_state_is_tablet_mode,
+ },
+ .event = {
+ .reg = SSAM_EVENT_REGISTRY_SAM,
+ .id = {
+ .target_category = SSAM_SSH_TC_POS,
+ .instance = 0,
+ },
+ .mask = SSAM_EVENT_MASK_TARGET,
+ },
+};
+
+
+/* -- Driver registration. -------------------------------------------------- */
+
+static const struct ssam_device_id ssam_tablet_sw_match[] = {
+ { SSAM_SDEV(KIP, 0x01, 0x00, 0x01), (unsigned long)&ssam_kip_sw_desc },
+ { SSAM_SDEV(POS, 0x01, 0x00, 0x01), (unsigned long)&ssam_pos_sw_desc },
+ { },
+};
+MODULE_DEVICE_TABLE(ssam, ssam_tablet_sw_match);
+
+static struct ssam_device_driver ssam_tablet_sw_driver = {
+ .probe = ssam_tablet_sw_probe,
+ .remove = ssam_tablet_sw_remove,
+ .match_table = ssam_tablet_sw_match,
+ .driver = {
+ .name = "surface_aggregator_tablet_mode_switch",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ .pm = &ssam_tablet_sw_pm_ops,
+ },
+};
+module_ssam_device_driver(ssam_tablet_sw_driver);
+
+MODULE_AUTHOR("Maximilian Luz <luzmaximilian@gmail.com>");
+MODULE_DESCRIPTION("Tablet mode switch driver for Surface devices using the Surface Aggregator Module");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/surface/surface_dtx.c b/drivers/platform/surface/surface_dtx.c
index 1203b9a82993..ed36944467f9 100644
--- a/drivers/platform/surface/surface_dtx.c
+++ b/drivers/platform/surface/surface_dtx.c
@@ -8,7 +8,7 @@
* acknowledge (to speed things up), abort (e.g. in case the dGPU is still in
* use), or request detachment via user-space.
*
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
*/
#include <linux/fs.h>
diff --git a/drivers/platform/surface/surface_gpe.c b/drivers/platform/surface/surface_gpe.c
index ec66fde28e75..c219b840d491 100644
--- a/drivers/platform/surface/surface_gpe.c
+++ b/drivers/platform/surface/surface_gpe.c
@@ -4,7 +4,7 @@
* properly configuring the respective GPEs. Required for wakeup via lid on
* newer Intel-based Microsoft Surface devices.
*
- * Copyright (C) 2020 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2020-2022 Maximilian Luz <luzmaximilian@gmail.com>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -172,6 +172,18 @@ static const struct dmi_system_id dmi_lid_device_table[] = {
.driver_data = (void *)lid_device_props_l4D,
},
{
+ .ident = "Surface Laptop 4 (Intel 13\")",
+ .matches = {
+ /*
+ * We match for SKU here due to different variants: The
+ * AMD (15") version does not rely on GPEs.
+ */
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Laptop_4_1950:1951"),
+ },
+ .driver_data = (void *)lid_device_props_l4B,
+ },
+ {
.ident = "Surface Laptop Studio",
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
diff --git a/drivers/platform/surface/surface_hotplug.c b/drivers/platform/surface/surface_hotplug.c
index cfcc15cfbacb..f004a2495201 100644
--- a/drivers/platform/surface/surface_hotplug.c
+++ b/drivers/platform/surface/surface_hotplug.c
@@ -10,7 +10,7 @@
* Event signaling is handled via ACPI, which will generate the appropriate
* device-check notifications to be picked up by the PCIe hot-plug driver.
*
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
*/
#include <linux/acpi.h>
diff --git a/drivers/platform/surface/surface_platform_profile.c b/drivers/platform/surface/surface_platform_profile.c
index 6373d3b5eb7f..fbf2e11fd6ce 100644
--- a/drivers/platform/surface/surface_platform_profile.c
+++ b/drivers/platform/surface/surface_platform_profile.c
@@ -3,7 +3,7 @@
* Surface Platform Profile / Performance Mode driver for Surface System
* Aggregator Module (thermal subsystem).
*
- * Copyright (C) 2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2021-2022 Maximilian Luz <luzmaximilian@gmail.com>
*/
#include <asm/unaligned.h>
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index bc4013e950ed..f2f98e942cf2 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -177,17 +177,15 @@ config ACER_WIRELESS
config ACER_WMI
tristate "Acer WMI Laptop Extras"
- depends on ACPI
- select LEDS_CLASS
- select NEW_LEDS
depends on BACKLIGHT_CLASS_DEVICE
depends on SERIO_I8042
depends on INPUT
depends on RFKILL || RFKILL = n
depends on ACPI_WMI
+ select ACPI_VIDEO
select INPUT_SPARSEKMAP
- # Acer WMI depends on ACPI_VIDEO when ACPI is enabled
- select ACPI_VIDEO if ACPI
+ select LEDS_CLASS
+ select NEW_LEDS
help
This is a driver for newer Acer (and Wistron) laptops. It adds
wireless radio and bluetooth control, and on some laptops,
@@ -196,32 +194,7 @@ config ACER_WMI
If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
here.
-config AMD_PMC
- tristate "AMD SoC PMC driver"
- depends on ACPI && PCI && RTC_CLASS
- help
- The driver provides support for AMD Power Management Controller
- primarily responsible for S2Idle transactions that are driven from
- a platform firmware running on SMU. This driver also provides a debug
- mechanism to investigate the S2Idle transactions and failures.
-
- Say Y or M here if you have a notebook powered by AMD RYZEN CPU/APU.
-
- If you choose to compile this driver as a module the module will be
- called amd-pmc.
-
-config AMD_HSMP
- tristate "AMD HSMP Driver"
- depends on AMD_NB && X86_64
- help
- The driver provides a way for user space tools to monitor and manage
- system management functionality on EPYC server CPUs from AMD.
-
- Host System Management Port (HSMP) interface is a mailbox interface
- between the x86 core and the System Management Unit (SMU) firmware.
-
- If you choose to compile this driver as a module the module will be
- called amd_hsmp.
+source "drivers/platform/x86/amd/Kconfig"
config ADV_SWBUTTON
tristate "Advantech ACPI Software Button Driver"
@@ -300,6 +273,8 @@ config ASUS_WMI
select INPUT_SPARSEKMAP
select LEDS_CLASS
select NEW_LEDS
+ select LEDS_TRIGGERS
+ select LEDS_TRIGGER_AUDIO
select ACPI_PLATFORM_PROFILE
help
Say Y here if you have a WMI aware Asus laptop (like Eee PCs or new
@@ -1164,7 +1139,14 @@ config WINMATE_FM07_KEYS
endif # X86_PLATFORM_DEVICES
-config PMC_ATOM
- def_bool y
- depends on PCI
- select COMMON_CLK
+config P2SB
+ bool "Primary to Sideband (P2SB) bridge access support"
+ depends on PCI && X86
+ help
+ The Primary to Sideband (P2SB) bridge is an interface to some
+ PCI devices connected through it. In particular, SPI NOR controller
+ in Intel Apollo Lake SoC is one of such devices.
+
+ The main purpose of this library is to unhide P2SB device in case
+ firmware kept it hidden on some platforms in order to access devices
+ behind it.
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 4a59f47a46e2..5a428caa654a 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -23,8 +23,7 @@ obj-$(CONFIG_ACER_WIRELESS) += acer-wireless.o
obj-$(CONFIG_ACER_WMI) += acer-wmi.o
# AMD
-obj-$(CONFIG_AMD_PMC) += amd-pmc.o
-obj-$(CONFIG_AMD_HSMP) += amd_hsmp.o
+obj-y += amd/
# Advantech
obj-$(CONFIG_ADV_SWBUTTON) += adv_swbutton.o
@@ -120,13 +119,17 @@ obj-$(CONFIG_X86_ANDROID_TABLETS) += x86-android-tablets.o
# Intel uncore drivers
obj-$(CONFIG_INTEL_IPS) += intel_ips.o
+# Intel miscellaneous drivers
+intel_p2sb-y := p2sb.o
+obj-$(CONFIG_P2SB) += intel_p2sb.o
+
# Intel PMIC / PMC / P-Unit devices
obj-$(CONFIG_INTEL_SCU_IPC) += intel_scu_ipc.o
obj-$(CONFIG_INTEL_SCU_PCI) += intel_scu_pcidrv.o
obj-$(CONFIG_INTEL_SCU_PLATFORM) += intel_scu_pltdrv.o
obj-$(CONFIG_INTEL_SCU_WDT) += intel_scu_wdt.o
obj-$(CONFIG_INTEL_SCU_IPC_UTIL) += intel_scu_ipcutil.o
-obj-$(CONFIG_PMC_ATOM) += pmc_atom.o
+obj-$(CONFIG_X86_INTEL_LPSS) += pmc_atom.o
# Siemens Simatic Industrial PCs
obj-$(CONFIG_SIEMENS_SIMATIC_IPC) += simatic-ipc.o
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 9c6943e401a6..e0230ea0cb7e 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -1615,12 +1615,7 @@ static int read_brightness(struct backlight_device *bd)
static int update_bl_status(struct backlight_device *bd)
{
- int intensity = bd->props.brightness;
-
- if (bd->props.power != FB_BLANK_UNBLANK)
- intensity = 0;
- if (bd->props.fb_blank != FB_BLANK_UNBLANK)
- intensity = 0;
+ int intensity = backlight_get_brightness(bd);
set_u32(intensity, ACER_CAP_BRIGHTNESS);
diff --git a/drivers/platform/x86/amd/Kconfig b/drivers/platform/x86/amd/Kconfig
new file mode 100644
index 000000000000..c0d0a3c5170c
--- /dev/null
+++ b/drivers/platform/x86/amd/Kconfig
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# AMD x86 Platform Specific Drivers
+#
+
+config AMD_PMC
+ tristate "AMD SoC PMC driver"
+ depends on ACPI && PCI && RTC_CLASS
+ help
+ The driver provides support for AMD Power Management Controller
+ primarily responsible for S2Idle transactions that are driven from
+ a platform firmware running on SMU. This driver also provides a debug
+ mechanism to investigate the S2Idle transactions and failures.
+
+ Say Y or M here if you have a notebook powered by AMD RYZEN CPU/APU.
+
+ If you choose to compile this driver as a module the module will be
+ called amd-pmc.
+
+config AMD_HSMP
+ tristate "AMD HSMP Driver"
+ depends on AMD_NB && X86_64
+ help
+ The driver provides a way for user space tools to monitor and manage
+ system management functionality on EPYC server CPUs from AMD.
+
+ Host System Management Port (HSMP) interface is a mailbox interface
+ between the x86 core and the System Management Unit (SMU) firmware.
+
+ If you choose to compile this driver as a module the module will be
+ called amd_hsmp.
diff --git a/drivers/platform/x86/amd/Makefile b/drivers/platform/x86/amd/Makefile
new file mode 100644
index 000000000000..a03fbb08e808
--- /dev/null
+++ b/drivers/platform/x86/amd/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for drivers/platform/x86/amd
+# AMD x86 Platform-Specific Drivers
+#
+
+amd-pmc-y := pmc.o
+obj-$(CONFIG_AMD_PMC) += amd-pmc.o
+amd_hsmp-y := hsmp.o
+obj-$(CONFIG_AMD_HSMP) += amd_hsmp.o
diff --git a/drivers/platform/x86/amd_hsmp.c b/drivers/platform/x86/amd/hsmp.c
index a0c54b838c11..a0c54b838c11 100644
--- a/drivers/platform/x86/amd_hsmp.c
+++ b/drivers/platform/x86/amd/hsmp.c
diff --git a/drivers/platform/x86/amd-pmc.c b/drivers/platform/x86/amd/pmc.c
index 700eb19e8450..700eb19e8450 100644
--- a/drivers/platform/x86/amd-pmc.c
+++ b/drivers/platform/x86/amd/pmc.c
diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c
index 57553f9b4d1d..ffe98a18440b 100644
--- a/drivers/platform/x86/apple-gmux.c
+++ b/drivers/platform/x86/apple-gmux.c
@@ -291,10 +291,7 @@ static int gmux_get_brightness(struct backlight_device *bd)
static int gmux_update_status(struct backlight_device *bd)
{
struct apple_gmux_data *gmux_data = bl_get_data(bd);
- u32 brightness = bd->props.brightness;
-
- if (bd->props.state & BL_CORE_SUSPENDED)
- return 0;
+ u32 brightness = backlight_get_brightness(bd);
gmux_write32(gmux_data, GMUX_PORT_BRIGHTNESS, brightness);
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 62ce198a3463..89b604e04d7f 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -208,6 +208,7 @@ struct asus_wmi {
int kbd_led_wk;
struct led_classdev lightbar_led;
int lightbar_led_wk;
+ struct led_classdev micmute_led;
struct workqueue_struct *led_workqueue;
struct work_struct tpd_led_work;
struct work_struct wlan_led_work;
@@ -1028,12 +1029,23 @@ static enum led_brightness lightbar_led_get(struct led_classdev *led_cdev)
return result & ASUS_WMI_DSTS_LIGHTBAR_MASK;
}
+static int micmute_led_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ int state = brightness != LED_OFF;
+ int err;
+
+ err = asus_wmi_set_devstate(ASUS_WMI_DEVID_MICMUTE_LED, state, NULL);
+ return err < 0 ? err : 0;
+}
+
static void asus_wmi_led_exit(struct asus_wmi *asus)
{
led_classdev_unregister(&asus->kbd_led);
led_classdev_unregister(&asus->tpd_led);
led_classdev_unregister(&asus->wlan_led);
led_classdev_unregister(&asus->lightbar_led);
+ led_classdev_unregister(&asus->micmute_led);
if (asus->led_workqueue)
destroy_workqueue(asus->led_workqueue);
@@ -1105,6 +1117,19 @@ static int asus_wmi_led_init(struct asus_wmi *asus)
&asus->lightbar_led);
}
+ if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_MICMUTE_LED)) {
+ asus->micmute_led.name = "asus::micmute";
+ asus->micmute_led.max_brightness = 1;
+ asus->micmute_led.brightness = ledtrig_audio_get(LED_AUDIO_MICMUTE);
+ asus->micmute_led.brightness_set_blocking = micmute_led_set;
+ asus->micmute_led.default_trigger = "audio-micmute";
+
+ rv = led_classdev_register(&asus->platform_device->dev,
+ &asus->micmute_led);
+ if (rv)
+ goto error;
+ }
+
error:
if (rv)
asus_wmi_led_exit(asus);
diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c
index ab610376fdad..0942f50bd793 100644
--- a/drivers/platform/x86/compal-laptop.c
+++ b/drivers/platform/x86/compal-laptop.c
@@ -324,9 +324,7 @@ static int bl_update_status(struct backlight_device *b)
if (ret)
return ret;
- set_backlight_state((b->props.power == FB_BLANK_UNBLANK)
- && !(b->props.state & BL_CORE_SUSPENDED)
- && !(b->props.state & BL_CORE_FBBLANK));
+ set_backlight_state(!backlight_is_blank(b));
return 0;
}
diff --git a/drivers/platform/x86/dell/Kconfig b/drivers/platform/x86/dell/Kconfig
index fe224a54f24c..25421e061c47 100644
--- a/drivers/platform/x86/dell/Kconfig
+++ b/drivers/platform/x86/dell/Kconfig
@@ -5,7 +5,6 @@
menuconfig X86_PLATFORM_DRIVERS_DELL
bool "Dell X86 Platform Specific Device Drivers"
- depends on X86_PLATFORM_DEVICES
help
Say Y here to get to see options for device drivers for various
Dell x86 platforms, including vendor-specific laptop extension drivers.
diff --git a/drivers/platform/x86/intel/pmt/class.c b/drivers/platform/x86/intel/pmt/class.c
index 1c9e3f3ea41c..53d7fd2943b4 100644
--- a/drivers/platform/x86/intel/pmt/class.c
+++ b/drivers/platform/x86/intel/pmt/class.c
@@ -20,25 +20,16 @@
#define PMT_XA_MAX INT_MAX
#define PMT_XA_LIMIT XA_LIMIT(PMT_XA_START, PMT_XA_MAX)
-/*
- * Early implementations of PMT on client platforms have some
- * differences from the server platforms (which use the Out Of Band
- * Management Services Module OOBMSM). This list tracks those
- * platforms as needed to handle those differences. Newer client
- * platforms are expected to be fully compatible with server.
- */
-static const struct pci_device_id pmt_telem_early_client_pci_ids[] = {
- { PCI_VDEVICE(INTEL, 0x467d) }, /* ADL */
- { PCI_VDEVICE(INTEL, 0x490e) }, /* DG1 */
- { PCI_VDEVICE(INTEL, 0x9a0d) }, /* TGL */
- { }
-};
-
bool intel_pmt_is_early_client_hw(struct device *dev)
{
- struct pci_dev *parent = to_pci_dev(dev->parent);
+ struct intel_vsec_device *ivdev = dev_to_ivdev(dev);
- return !!pci_match_id(pmt_telem_early_client_pci_ids, parent);
+ /*
+ * Early implementations of PMT on client platforms have some
+ * differences from the server platforms (which use the Out Of Band
+ * Management Services Module OOBMSM).
+ */
+ return !!(ivdev->info->quirks & VSEC_QUIRK_EARLY_HW);
}
EXPORT_SYMBOL_GPL(intel_pmt_is_early_client_hw);
diff --git a/drivers/platform/x86/intel/pmt/telemetry.c b/drivers/platform/x86/intel/pmt/telemetry.c
index f73ecfd4a309..5e4009c05ecf 100644
--- a/drivers/platform/x86/intel/pmt/telemetry.c
+++ b/drivers/platform/x86/intel/pmt/telemetry.c
@@ -23,12 +23,19 @@
#define TELEM_GUID_OFFSET 0x4
#define TELEM_BASE_OFFSET 0x8
#define TELEM_ACCESS(v) ((v) & GENMASK(3, 0))
+#define TELEM_TYPE(v) (((v) & GENMASK(7, 4)) >> 4)
/* size is in bytes */
#define TELEM_SIZE(v) (((v) & GENMASK(27, 12)) >> 10)
/* Used by client hardware to identify a fixed telemetry entry*/
#define TELEM_CLIENT_FIXED_BLOCK_GUID 0x10000000
+enum telem_type {
+ TELEM_TYPE_PUNIT = 0,
+ TELEM_TYPE_CRASHLOG,
+ TELEM_TYPE_PUNIT_FIXED,
+};
+
struct pmt_telem_priv {
int num_entries;
struct intel_pmt_entry entry[];
@@ -39,10 +46,15 @@ static bool pmt_telem_region_overlaps(struct intel_pmt_entry *entry,
{
u32 guid = readl(entry->disc_table + TELEM_GUID_OFFSET);
- if (guid != TELEM_CLIENT_FIXED_BLOCK_GUID)
- return false;
+ if (intel_pmt_is_early_client_hw(dev)) {
+ u32 type = TELEM_TYPE(readl(entry->disc_table));
+
+ if ((type == TELEM_TYPE_PUNIT_FIXED) ||
+ (guid == TELEM_CLIENT_FIXED_BLOCK_GUID))
+ return true;
+ }
- return intel_pmt_is_early_client_hw(dev);
+ return false;
}
static int pmt_telem_header_decode(struct intel_pmt_entry *entry,
diff --git a/drivers/platform/x86/intel/speed_select_if/isst_if_common.c b/drivers/platform/x86/intel/speed_select_if/isst_if_common.c
index e8424e70d81d..fd102678c75f 100644
--- a/drivers/platform/x86/intel/speed_select_if/isst_if_common.c
+++ b/drivers/platform/x86/intel/speed_select_if/isst_if_common.c
@@ -277,29 +277,38 @@ static int isst_if_get_platform_info(void __user *argp)
return 0;
}
+#define ISST_MAX_BUS_NUMBER 2
struct isst_if_cpu_info {
/* For BUS 0 and BUS 1 only, which we need for PUNIT interface */
- int bus_info[2];
- struct pci_dev *pci_dev[2];
+ int bus_info[ISST_MAX_BUS_NUMBER];
+ struct pci_dev *pci_dev[ISST_MAX_BUS_NUMBER];
int punit_cpu_id;
int numa_node;
};
+struct isst_if_pkg_info {
+ struct pci_dev *pci_dev[ISST_MAX_BUS_NUMBER];
+};
+
static struct isst_if_cpu_info *isst_cpu_info;
+static struct isst_if_pkg_info *isst_pkg_info;
+
#define ISST_MAX_PCI_DOMAINS 8
static struct pci_dev *_isst_if_get_pci_dev(int cpu, int bus_no, int dev, int fn)
{
struct pci_dev *matched_pci_dev = NULL;
struct pci_dev *pci_dev = NULL;
- int no_matches = 0;
+ int no_matches = 0, pkg_id;
int i, bus_number;
- if (bus_no < 0 || bus_no > 1 || cpu < 0 || cpu >= nr_cpu_ids ||
- cpu >= num_possible_cpus())
+ if (bus_no < 0 || bus_no >= ISST_MAX_BUS_NUMBER || cpu < 0 ||
+ cpu >= nr_cpu_ids || cpu >= num_possible_cpus())
return NULL;
+ pkg_id = topology_physical_package_id(cpu);
+
bus_number = isst_cpu_info[cpu].bus_info[bus_no];
if (bus_number < 0)
return NULL;
@@ -324,6 +333,8 @@ static struct pci_dev *_isst_if_get_pci_dev(int cpu, int bus_no, int dev, int fn
}
if (node == isst_cpu_info[cpu].numa_node) {
+ isst_pkg_info[pkg_id].pci_dev[bus_no] = _pci_dev;
+
pci_dev = _pci_dev;
break;
}
@@ -342,6 +353,10 @@ static struct pci_dev *_isst_if_get_pci_dev(int cpu, int bus_no, int dev, int fn
if (!pci_dev && no_matches == 1)
pci_dev = matched_pci_dev;
+ /* Return pci_dev pointer for any matched CPU in the package */
+ if (!pci_dev)
+ pci_dev = isst_pkg_info[pkg_id].pci_dev[bus_no];
+
return pci_dev;
}
@@ -361,8 +376,8 @@ struct pci_dev *isst_if_get_pci_dev(int cpu, int bus_no, int dev, int fn)
{
struct pci_dev *pci_dev;
- if (bus_no < 0 || bus_no > 1 || cpu < 0 || cpu >= nr_cpu_ids ||
- cpu >= num_possible_cpus())
+ if (bus_no < 0 || bus_no >= ISST_MAX_BUS_NUMBER || cpu < 0 ||
+ cpu >= nr_cpu_ids || cpu >= num_possible_cpus())
return NULL;
pci_dev = isst_cpu_info[cpu].pci_dev[bus_no];
@@ -417,10 +432,19 @@ static int isst_if_cpu_info_init(void)
if (!isst_cpu_info)
return -ENOMEM;
+ isst_pkg_info = kcalloc(topology_max_packages(),
+ sizeof(*isst_pkg_info),
+ GFP_KERNEL);
+ if (!isst_pkg_info) {
+ kfree(isst_cpu_info);
+ return -ENOMEM;
+ }
+
ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
"platform/x86/isst-if:online",
isst_if_cpu_online, NULL);
if (ret < 0) {
+ kfree(isst_pkg_info);
kfree(isst_cpu_info);
return ret;
}
@@ -433,6 +457,7 @@ static int isst_if_cpu_info_init(void)
static void isst_if_cpu_info_exit(void)
{
cpuhp_remove_state(isst_if_online_id);
+ kfree(isst_pkg_info);
kfree(isst_cpu_info);
};
diff --git a/drivers/platform/x86/intel/vsec.c b/drivers/platform/x86/intel/vsec.c
index bed436bf181f..bb81b8b1f7e9 100644
--- a/drivers/platform/x86/intel/vsec.c
+++ b/drivers/platform/x86/intel/vsec.c
@@ -15,6 +15,7 @@
#include <linux/auxiliary_bus.h>
#include <linux/bits.h>
+#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/idr.h>
#include <linux/module.h>
@@ -30,9 +31,13 @@
#define INTEL_DVSEC_TABLE_BAR(x) ((x) & GENMASK(2, 0))
#define INTEL_DVSEC_TABLE_OFFSET(x) ((x) & GENMASK(31, 3))
#define TABLE_OFFSET_SHIFT 3
+#define PMT_XA_START 0
+#define PMT_XA_MAX INT_MAX
+#define PMT_XA_LIMIT XA_LIMIT(PMT_XA_START, PMT_XA_MAX)
static DEFINE_IDA(intel_vsec_ida);
static DEFINE_IDA(intel_vsec_sdsi_ida);
+static DEFINE_XARRAY_ALLOC(auxdev_array);
/**
* struct intel_vsec_header - Common fields of Intel VSEC and DVSEC registers.
@@ -54,12 +59,6 @@ struct intel_vsec_header {
u32 offset;
};
-/* Platform specific data */
-struct intel_vsec_platform_info {
- struct intel_vsec_header **capabilities;
- unsigned long quirks;
-};
-
enum intel_vsec_id {
VSEC_ID_TELEMETRY = 2,
VSEC_ID_WATCHER = 3,
@@ -138,7 +137,7 @@ static int intel_vsec_add_aux(struct pci_dev *pdev, struct intel_vsec_device *in
const char *name)
{
struct auxiliary_device *auxdev = &intel_vsec_dev->auxdev;
- int ret;
+ int ret, id;
ret = ida_alloc(intel_vsec_dev->ida, GFP_KERNEL);
if (ret < 0) {
@@ -165,14 +164,26 @@ static int intel_vsec_add_aux(struct pci_dev *pdev, struct intel_vsec_device *in
return ret;
}
- return devm_add_action_or_reset(&pdev->dev, intel_vsec_remove_aux, auxdev);
+ ret = devm_add_action_or_reset(&pdev->dev, intel_vsec_remove_aux,
+ auxdev);
+ if (ret < 0)
+ return ret;
+
+ /* Add auxdev to list */
+ ret = xa_alloc(&auxdev_array, &id, intel_vsec_dev, PMT_XA_LIMIT,
+ GFP_KERNEL);
+ if (ret)
+ return ret;
+
+ return 0;
}
static int intel_vsec_add_dev(struct pci_dev *pdev, struct intel_vsec_header *header,
- unsigned long quirks)
+ struct intel_vsec_platform_info *info)
{
struct intel_vsec_device *intel_vsec_dev;
struct resource *res, *tmp;
+ unsigned long quirks = info->quirks;
int i;
if (!intel_vsec_allowed(header->id) || intel_vsec_disabled(header->id, quirks))
@@ -216,7 +227,7 @@ static int intel_vsec_add_dev(struct pci_dev *pdev, struct intel_vsec_header *he
intel_vsec_dev->pcidev = pdev;
intel_vsec_dev->resource = res;
intel_vsec_dev->num_resources = header->num_entries;
- intel_vsec_dev->quirks = quirks;
+ intel_vsec_dev->info = info;
if (header->id == VSEC_ID_SDSI)
intel_vsec_dev->ida = &intel_vsec_sdsi_ida;
@@ -226,14 +237,15 @@ static int intel_vsec_add_dev(struct pci_dev *pdev, struct intel_vsec_header *he
return intel_vsec_add_aux(pdev, intel_vsec_dev, intel_vsec_name(header->id));
}
-static bool intel_vsec_walk_header(struct pci_dev *pdev, unsigned long quirks,
- struct intel_vsec_header **header)
+static bool intel_vsec_walk_header(struct pci_dev *pdev,
+ struct intel_vsec_platform_info *info)
{
+ struct intel_vsec_header **header = info->capabilities;
bool have_devices = false;
int ret;
for ( ; *header; header++) {
- ret = intel_vsec_add_dev(pdev, *header, quirks);
+ ret = intel_vsec_add_dev(pdev, *header, info);
if (ret)
dev_info(&pdev->dev, "Could not add device for DVSEC id %d\n",
(*header)->id);
@@ -244,7 +256,8 @@ static bool intel_vsec_walk_header(struct pci_dev *pdev, unsigned long quirks,
return have_devices;
}
-static bool intel_vsec_walk_dvsec(struct pci_dev *pdev, unsigned long quirks)
+static bool intel_vsec_walk_dvsec(struct pci_dev *pdev,
+ struct intel_vsec_platform_info *info)
{
bool have_devices = false;
int pos = 0;
@@ -283,7 +296,7 @@ static bool intel_vsec_walk_dvsec(struct pci_dev *pdev, unsigned long quirks)
pci_read_config_dword(pdev, pos + PCI_DVSEC_HEADER2, &hdr);
header.id = PCI_DVSEC_HEADER2_ID(hdr);
- ret = intel_vsec_add_dev(pdev, &header, quirks);
+ ret = intel_vsec_add_dev(pdev, &header, info);
if (ret)
continue;
@@ -293,7 +306,8 @@ static bool intel_vsec_walk_dvsec(struct pci_dev *pdev, unsigned long quirks)
return have_devices;
}
-static bool intel_vsec_walk_vsec(struct pci_dev *pdev, unsigned long quirks)
+static bool intel_vsec_walk_vsec(struct pci_dev *pdev,
+ struct intel_vsec_platform_info *info)
{
bool have_devices = false;
int pos = 0;
@@ -327,7 +341,7 @@ static bool intel_vsec_walk_vsec(struct pci_dev *pdev, unsigned long quirks)
header.tbir = INTEL_DVSEC_TABLE_BAR(table);
header.offset = INTEL_DVSEC_TABLE_OFFSET(table);
- ret = intel_vsec_add_dev(pdev, &header, quirks);
+ ret = intel_vsec_add_dev(pdev, &header, info);
if (ret)
continue;
@@ -341,25 +355,25 @@ static int intel_vsec_pci_probe(struct pci_dev *pdev, const struct pci_device_id
{
struct intel_vsec_platform_info *info;
bool have_devices = false;
- unsigned long quirks = 0;
int ret;
ret = pcim_enable_device(pdev);
if (ret)
return ret;
+ pci_save_state(pdev);
info = (struct intel_vsec_platform_info *)id->driver_data;
- if (info)
- quirks = info->quirks;
+ if (!info)
+ return -EINVAL;
- if (intel_vsec_walk_dvsec(pdev, quirks))
+ if (intel_vsec_walk_dvsec(pdev, info))
have_devices = true;
- if (intel_vsec_walk_vsec(pdev, quirks))
+ if (intel_vsec_walk_vsec(pdev, info))
have_devices = true;
if (info && (info->quirks & VSEC_QUIRK_NO_DVSEC) &&
- intel_vsec_walk_header(pdev, quirks, info->capabilities))
+ intel_vsec_walk_header(pdev, info))
have_devices = true;
if (!have_devices)
@@ -370,7 +384,8 @@ static int intel_vsec_pci_probe(struct pci_dev *pdev, const struct pci_device_id
/* TGL info */
static const struct intel_vsec_platform_info tgl_info = {
- .quirks = VSEC_QUIRK_NO_WATCHER | VSEC_QUIRK_NO_CRASHLOG | VSEC_QUIRK_TABLE_SHIFT,
+ .quirks = VSEC_QUIRK_NO_WATCHER | VSEC_QUIRK_NO_CRASHLOG |
+ VSEC_QUIRK_TABLE_SHIFT | VSEC_QUIRK_EARLY_HW,
};
/* DG1 info */
@@ -390,26 +405,89 @@ static struct intel_vsec_header *dg1_capabilities[] = {
static const struct intel_vsec_platform_info dg1_info = {
.capabilities = dg1_capabilities,
- .quirks = VSEC_QUIRK_NO_DVSEC,
+ .quirks = VSEC_QUIRK_NO_DVSEC | VSEC_QUIRK_EARLY_HW,
};
#define PCI_DEVICE_ID_INTEL_VSEC_ADL 0x467d
#define PCI_DEVICE_ID_INTEL_VSEC_DG1 0x490e
#define PCI_DEVICE_ID_INTEL_VSEC_OOBMSM 0x09a7
+#define PCI_DEVICE_ID_INTEL_VSEC_RPL 0xa77d
#define PCI_DEVICE_ID_INTEL_VSEC_TGL 0x9a0d
static const struct pci_device_id intel_vsec_pci_ids[] = {
{ PCI_DEVICE_DATA(INTEL, VSEC_ADL, &tgl_info) },
{ PCI_DEVICE_DATA(INTEL, VSEC_DG1, &dg1_info) },
- { PCI_DEVICE_DATA(INTEL, VSEC_OOBMSM, NULL) },
+ { PCI_DEVICE_DATA(INTEL, VSEC_OOBMSM, &(struct intel_vsec_platform_info) {}) },
+ { PCI_DEVICE_DATA(INTEL, VSEC_RPL, &tgl_info) },
{ PCI_DEVICE_DATA(INTEL, VSEC_TGL, &tgl_info) },
{ }
};
MODULE_DEVICE_TABLE(pci, intel_vsec_pci_ids);
+static pci_ers_result_t intel_vsec_pci_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ pci_ers_result_t status = PCI_ERS_RESULT_NEED_RESET;
+
+ dev_info(&pdev->dev, "PCI error detected, state %d", state);
+
+ if (state == pci_channel_io_perm_failure)
+ status = PCI_ERS_RESULT_DISCONNECT;
+ else
+ pci_disable_device(pdev);
+
+ return status;
+}
+
+static pci_ers_result_t intel_vsec_pci_slot_reset(struct pci_dev *pdev)
+{
+ struct intel_vsec_device *intel_vsec_dev;
+ pci_ers_result_t status = PCI_ERS_RESULT_DISCONNECT;
+ const struct pci_device_id *pci_dev_id;
+ unsigned long index;
+
+ dev_info(&pdev->dev, "Resetting PCI slot\n");
+
+ msleep(2000);
+ if (pci_enable_device(pdev)) {
+ dev_info(&pdev->dev,
+ "Failed to re-enable PCI device after reset.\n");
+ goto out;
+ }
+
+ status = PCI_ERS_RESULT_RECOVERED;
+
+ xa_for_each(&auxdev_array, index, intel_vsec_dev) {
+ /* check if pdev doesn't match */
+ if (pdev != intel_vsec_dev->pcidev)
+ continue;
+ devm_release_action(&pdev->dev, intel_vsec_remove_aux,
+ &intel_vsec_dev->auxdev);
+ }
+ pci_disable_device(pdev);
+ pci_restore_state(pdev);
+ pci_dev_id = pci_match_id(intel_vsec_pci_ids, pdev);
+ intel_vsec_pci_probe(pdev, pci_dev_id);
+
+out:
+ return status;
+}
+
+static void intel_vsec_pci_resume(struct pci_dev *pdev)
+{
+ dev_info(&pdev->dev, "Done resuming PCI device\n");
+}
+
+static const struct pci_error_handlers intel_vsec_pci_err_handlers = {
+ .error_detected = intel_vsec_pci_error_detected,
+ .slot_reset = intel_vsec_pci_slot_reset,
+ .resume = intel_vsec_pci_resume,
+};
+
static struct pci_driver intel_vsec_pci_driver = {
.name = "intel_vsec",
.id_table = intel_vsec_pci_ids,
.probe = intel_vsec_pci_probe,
+ .err_handler = &intel_vsec_pci_err_handlers,
};
module_pci_driver(intel_vsec_pci_driver);
diff --git a/drivers/platform/x86/intel/vsec.h b/drivers/platform/x86/intel/vsec.h
index 4cc36678e8c5..3deeb05cf394 100644
--- a/drivers/platform/x86/intel/vsec.h
+++ b/drivers/platform/x86/intel/vsec.h
@@ -20,6 +20,15 @@ enum intel_vsec_quirks {
/* DVSEC not present (provided in driver data) */
VSEC_QUIRK_NO_DVSEC = BIT(3),
+
+ /* Platforms requiring quirk in the auxiliary driver */
+ VSEC_QUIRK_EARLY_HW = BIT(4),
+};
+
+/* Platform specific data */
+struct intel_vsec_platform_info {
+ struct intel_vsec_header **capabilities;
+ unsigned long quirks;
};
struct intel_vsec_device {
@@ -27,7 +36,7 @@ struct intel_vsec_device {
struct pci_dev *pcidev;
struct resource *resource;
struct ida *ida;
- unsigned long quirks;
+ struct intel_vsec_platform_info *info;
int num_resources;
};
diff --git a/drivers/platform/x86/mlx-platform.c b/drivers/platform/x86/mlx-platform.c
index 447044fdcb77..5e072a0666f4 100644
--- a/drivers/platform/x86/mlx-platform.c
+++ b/drivers/platform/x86/mlx-platform.c
@@ -34,6 +34,7 @@
#define MLXPLAT_CPLD_LPC_REG_CPLD3_PN1_OFFSET 0x09
#define MLXPLAT_CPLD_LPC_REG_CPLD4_PN_OFFSET 0x0a
#define MLXPLAT_CPLD_LPC_REG_CPLD4_PN1_OFFSET 0x0b
+#define MLXPLAT_CPLD_LPC_REG_RESET_GP2_OFFSET 0x19
#define MLXPLAT_CPLD_LPC_REG_RESET_GP4_OFFSET 0x1c
#define MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET 0x1d
#define MLXPLAT_CPLD_LPC_REG_RST_CAUSE1_OFFSET 0x1e
@@ -66,9 +67,15 @@
#define MLXPLAT_CPLD_LPC_REG_AGGRCO_MASK_OFFSET 0x43
#define MLXPLAT_CPLD_LPC_REG_AGGRCX_OFFSET 0x44
#define MLXPLAT_CPLD_LPC_REG_AGGRCX_MASK_OFFSET 0x45
+#define MLXPLAT_CPLD_LPC_REG_GWP_OFFSET 0x4a
+#define MLXPLAT_CPLD_LPC_REG_GWP_EVENT_OFFSET 0x4b
+#define MLXPLAT_CPLD_LPC_REG_GWP_MASK_OFFSET 0x4c
#define MLXPLAT_CPLD_LPC_REG_ASIC_HEALTH_OFFSET 0x50
#define MLXPLAT_CPLD_LPC_REG_ASIC_EVENT_OFFSET 0x51
#define MLXPLAT_CPLD_LPC_REG_ASIC_MASK_OFFSET 0x52
+#define MLXPLAT_CPLD_LPC_REG_ASIC2_HEALTH_OFFSET 0x53
+#define MLXPLAT_CPLD_LPC_REG_ASIC2_EVENT_OFFSET 0x54
+#define MLXPLAT_CPLD_LPC_REG_ASIC2_MASK_OFFSET 0x55
#define MLXPLAT_CPLD_LPC_REG_AGGRLC_OFFSET 0x56
#define MLXPLAT_CPLD_LPC_REG_AGGRLC_MASK_OFFSET 0x57
#define MLXPLAT_CPLD_LPC_REG_PSU_OFFSET 0x58
@@ -143,6 +150,7 @@
#define MLXPLAT_CPLD_LPC_REG_SLOT_QTY_OFFSET 0xfa
#define MLXPLAT_CPLD_LPC_REG_CONFIG1_OFFSET 0xfb
#define MLXPLAT_CPLD_LPC_REG_CONFIG2_OFFSET 0xfc
+#define MLXPLAT_CPLD_LPC_REG_CONFIG3_OFFSET 0xfd
#define MLXPLAT_CPLD_LPC_IO_RANGE 0x100
#define MLXPLAT_CPLD_LPC_I2C_CH1_OFF 0xdb
#define MLXPLAT_CPLD_LPC_I2C_CH2_OFF 0xda
@@ -193,6 +201,7 @@
MLXPLAT_CPLD_AGGR_MASK_LC_ACT | \
MLXPLAT_CPLD_AGGR_MASK_LC_SDWN)
#define MLXPLAT_CPLD_LOW_AGGR_MASK_LOW 0xc1
+#define MLXPLAT_CPLD_LOW_AGGR_MASK_ASIC2 BIT(2)
#define MLXPLAT_CPLD_LOW_AGGR_MASK_I2C BIT(6)
#define MLXPLAT_CPLD_PSU_MASK GENMASK(1, 0)
#define MLXPLAT_CPLD_PWR_MASK GENMASK(1, 0)
@@ -204,6 +213,7 @@
#define MLXPLAT_CPLD_LED_LO_NIBBLE_MASK GENMASK(7, 4)
#define MLXPLAT_CPLD_LED_HI_NIBBLE_MASK GENMASK(3, 0)
#define MLXPLAT_CPLD_VOLTREG_UPD_MASK GENMASK(5, 4)
+#define MLXPLAT_CPLD_GWP_MASK GENMASK(0, 0)
#define MLXPLAT_CPLD_I2C_CAP_BIT 0x04
#define MLXPLAT_CPLD_I2C_CAP_MASK GENMASK(5, MLXPLAT_CPLD_I2C_CAP_BIT)
@@ -588,6 +598,15 @@ static struct mlxreg_core_data mlxplat_mlxcpld_default_asic_items_data[] = {
},
};
+static struct mlxreg_core_data mlxplat_mlxcpld_default_asic2_items_data[] = {
+ {
+ .label = "asic2",
+ .reg = MLXPLAT_CPLD_LPC_REG_ASIC2_HEALTH_OFFSET,
+ .mask = MLXPLAT_CPLD_ASIC_MASK,
+ .hpdev.nr = MLXPLAT_CPLD_NR_NONE,
+ },
+};
+
static struct mlxreg_core_item mlxplat_mlxcpld_default_items[] = {
{
.data = mlxplat_mlxcpld_default_psu_items_data,
@@ -1151,6 +1170,15 @@ static struct mlxreg_core_item mlxplat_mlxcpld_ext_items[] = {
.inversed = 0,
.health = true,
},
+ {
+ .data = mlxplat_mlxcpld_default_asic2_items_data,
+ .aggr_mask = MLXPLAT_CPLD_AGGR_MASK_NG_DEF,
+ .reg = MLXPLAT_CPLD_LPC_REG_ASIC2_HEALTH_OFFSET,
+ .mask = MLXPLAT_CPLD_ASIC_MASK,
+ .count = ARRAY_SIZE(mlxplat_mlxcpld_default_asic2_items_data),
+ .inversed = 0,
+ .health = true,
+ }
};
static
@@ -1160,7 +1188,7 @@ struct mlxreg_core_hotplug_platform_data mlxplat_mlxcpld_ext_data = {
.cell = MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET,
.mask = MLXPLAT_CPLD_AGGR_MASK_NG_DEF | MLXPLAT_CPLD_AGGR_MASK_COMEX,
.cell_low = MLXPLAT_CPLD_LPC_REG_AGGRLO_OFFSET,
- .mask_low = MLXPLAT_CPLD_LOW_AGGR_MASK_LOW,
+ .mask_low = MLXPLAT_CPLD_LOW_AGGR_MASK_LOW | MLXPLAT_CPLD_LOW_AGGR_MASK_ASIC2,
};
static struct mlxreg_core_data mlxplat_mlxcpld_modular_pwr_items_data[] = {
@@ -2004,6 +2032,38 @@ struct mlxreg_core_hotplug_platform_data mlxplat_mlxcpld_modular_data = {
.mask_low = MLXPLAT_CPLD_LOW_AGGR_MASK_LOW,
};
+/* Platform hotplug for NVLink blade systems family data */
+static struct mlxreg_core_data mlxplat_mlxcpld_global_wp_items_data[] = {
+ {
+ .label = "global_wp_grant",
+ .reg = MLXPLAT_CPLD_LPC_REG_GWP_OFFSET,
+ .mask = MLXPLAT_CPLD_GWP_MASK,
+ .hpdev.nr = MLXPLAT_CPLD_NR_NONE,
+ },
+};
+
+static struct mlxreg_core_item mlxplat_mlxcpld_nvlink_blade_items[] = {
+ {
+ .data = mlxplat_mlxcpld_global_wp_items_data,
+ .aggr_mask = MLXPLAT_CPLD_AGGR_MASK_NG_DEF,
+ .reg = MLXPLAT_CPLD_LPC_REG_GWP_OFFSET,
+ .mask = MLXPLAT_CPLD_GWP_MASK,
+ .count = ARRAY_SIZE(mlxplat_mlxcpld_global_wp_items_data),
+ .inversed = 0,
+ .health = false,
+ },
+};
+
+static
+struct mlxreg_core_hotplug_platform_data mlxplat_mlxcpld_nvlink_blade_data = {
+ .items = mlxplat_mlxcpld_nvlink_blade_items,
+ .counter = ARRAY_SIZE(mlxplat_mlxcpld_nvlink_blade_items),
+ .cell = MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET,
+ .mask = MLXPLAT_CPLD_AGGR_MASK_COMEX,
+ .cell_low = MLXPLAT_CPLD_LPC_REG_AGGRLO_OFFSET,
+ .mask_low = MLXPLAT_CPLD_LOW_AGGR_MASK_LOW,
+};
+
/* Platform led default data */
static struct mlxreg_core_data mlxplat_mlxcpld_default_led_data[] = {
{
@@ -2102,6 +2162,25 @@ static struct mlxreg_core_platform_data mlxplat_default_led_wc_data = {
.counter = ARRAY_SIZE(mlxplat_mlxcpld_default_led_wc_data),
};
+/* Platform led default data for water cooling Ethernet switch blade */
+static struct mlxreg_core_data mlxplat_mlxcpld_default_led_eth_wc_blade_data[] = {
+ {
+ .label = "status:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+ {
+ .label = "status:red",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK
+ },
+};
+
+static struct mlxreg_core_platform_data mlxplat_default_led_eth_wc_blade_data = {
+ .data = mlxplat_mlxcpld_default_led_eth_wc_blade_data,
+ .counter = ARRAY_SIZE(mlxplat_mlxcpld_default_led_eth_wc_blade_data),
+};
+
/* Platform led MSN21xx system family data */
static struct mlxreg_core_data mlxplat_mlxcpld_msn21xx_led_data[] = {
{
@@ -2857,6 +2936,18 @@ static struct mlxreg_core_data mlxplat_mlxcpld_default_ng_regs_io_data[] = {
.mode = 0444,
},
{
+ .label = "asic_reset",
+ .reg = MLXPLAT_CPLD_LPC_REG_RESET_GP2_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(3),
+ .mode = 0200,
+ },
+ {
+ .label = "asic2_reset",
+ .reg = MLXPLAT_CPLD_LPC_REG_RESET_GP2_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(2),
+ .mode = 0200,
+ },
+ {
.label = "reset_long_pb",
.reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET,
.mask = GENMASK(7, 0) & ~BIT(0),
@@ -2996,6 +3087,13 @@ static struct mlxreg_core_data mlxplat_mlxcpld_default_ng_regs_io_data[] = {
.mode = 0444,
},
{
+ .label = "asic2_health",
+ .reg = MLXPLAT_CPLD_LPC_REG_ASIC2_HEALTH_OFFSET,
+ .mask = MLXPLAT_CPLD_ASIC_MASK,
+ .bit = 1,
+ .mode = 0444,
+ },
+ {
.label = "fan_dir",
.reg = MLXPLAT_CPLD_LPC_REG_FAN_DIRECTION,
.bit = GENMASK(7, 0),
@@ -3057,6 +3155,12 @@ static struct mlxreg_core_data mlxplat_mlxcpld_default_ng_regs_io_data[] = {
.mode = 0444,
},
{
+ .label = "config3",
+ .reg = MLXPLAT_CPLD_LPC_REG_CONFIG3_OFFSET,
+ .bit = GENMASK(7, 0),
+ .mode = 0444,
+ },
+ {
.label = "ufm_version",
.reg = MLXPLAT_CPLD_LPC_REG_UFM_VERSION_OFFSET,
.bit = GENMASK(7, 0),
@@ -3535,6 +3639,12 @@ static struct mlxreg_core_data mlxplat_mlxcpld_modular_regs_io_data[] = {
.mode = 0444,
},
{
+ .label = "config3",
+ .reg = MLXPLAT_CPLD_LPC_REG_CONFIG3_OFFSET,
+ .bit = GENMASK(7, 0),
+ .mode = 0444,
+ },
+ {
.label = "ufm_version",
.reg = MLXPLAT_CPLD_LPC_REG_UFM_VERSION_OFFSET,
.bit = GENMASK(7, 0),
@@ -3547,6 +3657,209 @@ static struct mlxreg_core_platform_data mlxplat_modular_regs_io_data = {
.counter = ARRAY_SIZE(mlxplat_mlxcpld_modular_regs_io_data),
};
+/* Platform register access for NVLink blade systems family data */
+static struct mlxreg_core_data mlxplat_mlxcpld_nvlink_blade_regs_io_data[] = {
+ {
+ .label = "cpld1_version",
+ .reg = MLXPLAT_CPLD_LPC_REG_CPLD1_VER_OFFSET,
+ .bit = GENMASK(7, 0),
+ .mode = 0444,
+ },
+ {
+ .label = "cpld1_pn",
+ .reg = MLXPLAT_CPLD_LPC_REG_CPLD1_PN_OFFSET,
+ .bit = GENMASK(15, 0),
+ .mode = 0444,
+ .regnum = 2,
+ },
+ {
+ .label = "cpld1_version_min",
+ .reg = MLXPLAT_CPLD_LPC_REG_CPLD1_MVER_OFFSET,
+ .bit = GENMASK(7, 0),
+ .mode = 0444,
+ },
+ {
+ .label = "reset_aux_pwr_or_ref",
+ .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(2),
+ .mode = 0444,
+ },
+ {
+ .label = "reset_from_comex",
+ .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(4),
+ .mode = 0444,
+ },
+ {
+ .label = "reset_comex_pwr_fail",
+ .reg = MLXPLAT_CPLD_LPC_REG_RST_CAUSE1_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(3),
+ .mode = 0444,
+ },
+ {
+ .label = "reset_platform",
+ .reg = MLXPLAT_CPLD_LPC_REG_RST_CAUSE1_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(4),
+ .mode = 0444,
+ },
+ {
+ .label = "reset_soc",
+ .reg = MLXPLAT_CPLD_LPC_REG_RST_CAUSE1_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(5),
+ .mode = 0444,
+ },
+ {
+ .label = "reset_comex_wd",
+ .reg = MLXPLAT_CPLD_LPC_REG_RST_CAUSE1_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(6),
+ .mode = 0444,
+ },
+ {
+ .label = "reset_voltmon_upgrade_fail",
+ .reg = MLXPLAT_CPLD_LPC_REG_RST_CAUSE2_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(0),
+ .mode = 0444,
+ },
+ {
+ .label = "reset_system",
+ .reg = MLXPLAT_CPLD_LPC_REG_RST_CAUSE2_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(1),
+ .mode = 0444,
+ },
+ {
+ .label = "reset_sw_pwr_off",
+ .reg = MLXPLAT_CPLD_LPC_REG_RST_CAUSE2_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(2),
+ .mode = 0444,
+ },
+ {
+ .label = "reset_comex_thermal",
+ .reg = MLXPLAT_CPLD_LPC_REG_RST_CAUSE2_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(3),
+ .mode = 0444,
+ },
+ {
+ .label = "reset_reload_bios",
+ .reg = MLXPLAT_CPLD_LPC_REG_RST_CAUSE2_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(5),
+ .mode = 0444,
+ },
+ {
+ .label = "reset_ac_pwr_fail",
+ .reg = MLXPLAT_CPLD_LPC_REG_RST_CAUSE2_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(6),
+ .mode = 0444,
+ },
+ {
+ .label = "pwr_cycle",
+ .reg = MLXPLAT_CPLD_LPC_REG_GP1_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(2),
+ .mode = 0200,
+ },
+ {
+ .label = "pwr_down",
+ .reg = MLXPLAT_CPLD_LPC_REG_GP1_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(3),
+ .mode = 0200,
+ },
+ {
+ .label = "global_wp_request",
+ .reg = MLXPLAT_CPLD_LPC_REG_GP2_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(0),
+ .mode = 0644,
+ },
+ {
+ .label = "jtag_enable",
+ .reg = MLXPLAT_CPLD_LPC_REG_GP2_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(4),
+ .mode = 0644,
+ },
+ {
+ .label = "comm_chnl_ready",
+ .reg = MLXPLAT_CPLD_LPC_REG_GP2_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(6),
+ .mode = 0200,
+ },
+ {
+ .label = "bios_safe_mode",
+ .reg = MLXPLAT_CPLD_LPC_REG_GPCOM0_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(4),
+ .mode = 0444,
+ },
+ {
+ .label = "bios_active_image",
+ .reg = MLXPLAT_CPLD_LPC_REG_GPCOM0_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(5),
+ .mode = 0444,
+ },
+ {
+ .label = "bios_auth_fail",
+ .reg = MLXPLAT_CPLD_LPC_REG_GPCOM0_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(6),
+ .mode = 0444,
+ },
+ {
+ .label = "bios_upgrade_fail",
+ .reg = MLXPLAT_CPLD_LPC_REG_GPCOM0_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(7),
+ .mode = 0444,
+ },
+ {
+ .label = "voltreg_update_status",
+ .reg = MLXPLAT_CPLD_LPC_REG_GP0_RO_OFFSET,
+ .mask = MLXPLAT_CPLD_VOLTREG_UPD_MASK,
+ .bit = 5,
+ .mode = 0444,
+ },
+ {
+ .label = "vpd_wp",
+ .reg = MLXPLAT_CPLD_LPC_REG_GP0_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(3),
+ .mode = 0644,
+ },
+ {
+ .label = "pcie_asic_reset_dis",
+ .reg = MLXPLAT_CPLD_LPC_REG_GP0_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(4),
+ .mode = 0644,
+ },
+ {
+ .label = "global_wp_response",
+ .reg = MLXPLAT_CPLD_LPC_REG_GWP_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(0),
+ .mode = 0444,
+ },
+ {
+ .label = "config1",
+ .reg = MLXPLAT_CPLD_LPC_REG_CONFIG1_OFFSET,
+ .bit = GENMASK(7, 0),
+ .mode = 0444,
+ },
+ {
+ .label = "config2",
+ .reg = MLXPLAT_CPLD_LPC_REG_CONFIG2_OFFSET,
+ .bit = GENMASK(7, 0),
+ .mode = 0444,
+ },
+ {
+ .label = "config3",
+ .reg = MLXPLAT_CPLD_LPC_REG_CONFIG3_OFFSET,
+ .bit = GENMASK(7, 0),
+ .mode = 0444,
+ },
+ {
+ .label = "ufm_version",
+ .reg = MLXPLAT_CPLD_LPC_REG_UFM_VERSION_OFFSET,
+ .bit = GENMASK(7, 0),
+ .mode = 0444,
+ },
+};
+
+static struct mlxreg_core_platform_data mlxplat_nvlink_blade_regs_io_data = {
+ .data = mlxplat_mlxcpld_nvlink_blade_regs_io_data,
+ .counter = ARRAY_SIZE(mlxplat_mlxcpld_nvlink_blade_regs_io_data),
+};
+
/* Platform FAN default */
static struct mlxreg_core_data mlxplat_mlxcpld_default_fan_data[] = {
{
@@ -3932,8 +4245,12 @@ static bool mlxplat_mlxcpld_writeable_reg(struct device *dev, unsigned int reg)
case MLXPLAT_CPLD_LPC_REG_AGGRLO_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGRCO_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGRCX_MASK_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_GWP_EVENT_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_GWP_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_ASIC_EVENT_OFFSET:
case MLXPLAT_CPLD_LPC_REG_ASIC_MASK_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_ASIC2_EVENT_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_ASIC2_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_PSU_EVENT_OFFSET:
case MLXPLAT_CPLD_LPC_REG_PSU_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_PWR_EVENT_OFFSET:
@@ -4023,9 +4340,15 @@ static bool mlxplat_mlxcpld_readable_reg(struct device *dev, unsigned int reg)
case MLXPLAT_CPLD_LPC_REG_AGGRCO_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGRCX_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGRCX_MASK_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_GWP_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_GWP_EVENT_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_GWP_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_ASIC_HEALTH_OFFSET:
case MLXPLAT_CPLD_LPC_REG_ASIC_EVENT_OFFSET:
case MLXPLAT_CPLD_LPC_REG_ASIC_MASK_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_ASIC2_HEALTH_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_ASIC2_EVENT_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_ASIC2_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_PSU_OFFSET:
case MLXPLAT_CPLD_LPC_REG_PSU_EVENT_OFFSET:
case MLXPLAT_CPLD_LPC_REG_PSU_MASK_OFFSET:
@@ -4100,6 +4423,7 @@ static bool mlxplat_mlxcpld_readable_reg(struct device *dev, unsigned int reg)
case MLXPLAT_CPLD_LPC_REG_SLOT_QTY_OFFSET:
case MLXPLAT_CPLD_LPC_REG_CONFIG1_OFFSET:
case MLXPLAT_CPLD_LPC_REG_CONFIG2_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_CONFIG3_OFFSET:
case MLXPLAT_CPLD_LPC_REG_UFM_VERSION_OFFSET:
return true;
}
@@ -4150,9 +4474,15 @@ static bool mlxplat_mlxcpld_volatile_reg(struct device *dev, unsigned int reg)
case MLXPLAT_CPLD_LPC_REG_AGGRCO_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGRCX_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGRCX_MASK_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_GWP_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_GWP_EVENT_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_GWP_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_ASIC_HEALTH_OFFSET:
case MLXPLAT_CPLD_LPC_REG_ASIC_EVENT_OFFSET:
case MLXPLAT_CPLD_LPC_REG_ASIC_MASK_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_ASIC2_HEALTH_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_ASIC2_EVENT_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_ASIC2_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_PSU_OFFSET:
case MLXPLAT_CPLD_LPC_REG_PSU_EVENT_OFFSET:
case MLXPLAT_CPLD_LPC_REG_PSU_MASK_OFFSET:
@@ -4221,6 +4551,7 @@ static bool mlxplat_mlxcpld_volatile_reg(struct device *dev, unsigned int reg)
case MLXPLAT_CPLD_LPC_REG_SLOT_QTY_OFFSET:
case MLXPLAT_CPLD_LPC_REG_CONFIG1_OFFSET:
case MLXPLAT_CPLD_LPC_REG_CONFIG2_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_CONFIG3_OFFSET:
case MLXPLAT_CPLD_LPC_REG_UFM_VERSION_OFFSET:
return true;
}
@@ -4417,6 +4748,31 @@ static int __init mlxplat_dmi_default_wc_matched(const struct dmi_system_id *dmi
return 1;
}
+static int __init mlxplat_dmi_default_eth_wc_blade_matched(const struct dmi_system_id *dmi)
+{
+ int i;
+
+ mlxplat_max_adap_num = MLXPLAT_CPLD_MAX_PHYS_ADAPTER_NUM;
+ mlxplat_mux_num = ARRAY_SIZE(mlxplat_default_mux_data);
+ mlxplat_mux_data = mlxplat_default_mux_data;
+ for (i = 0; i < mlxplat_mux_num; i++) {
+ mlxplat_mux_data[i].values = mlxplat_msn21xx_channels;
+ mlxplat_mux_data[i].n_values =
+ ARRAY_SIZE(mlxplat_msn21xx_channels);
+ }
+ mlxplat_hotplug = &mlxplat_mlxcpld_default_wc_data;
+ mlxplat_hotplug->deferred_nr =
+ mlxplat_msn21xx_channels[MLXPLAT_CPLD_GRP_CHNL_NUM - 1];
+ mlxplat_led = &mlxplat_default_led_eth_wc_blade_data;
+ mlxplat_regs_io = &mlxplat_default_ng_regs_io_data;
+ for (i = 0; i < ARRAY_SIZE(mlxplat_mlxcpld_wd_set_type2); i++)
+ mlxplat_wd_data[i] = &mlxplat_mlxcpld_wd_set_type2[i];
+ mlxplat_i2c = &mlxplat_mlxcpld_i2c_ng_data;
+ mlxplat_regmap_config = &mlxplat_mlxcpld_regmap_config_ng;
+
+ return 1;
+}
+
static int __init mlxplat_dmi_msn21xx_matched(const struct dmi_system_id *dmi)
{
int i;
@@ -4579,6 +4935,28 @@ static int __init mlxplat_dmi_modular_matched(const struct dmi_system_id *dmi)
return 1;
}
+static int __init mlxplat_dmi_nvlink_blade_matched(const struct dmi_system_id *dmi)
+{
+ int i;
+
+ mlxplat_max_adap_num = MLXPLAT_CPLD_MAX_PHYS_ADAPTER_NUM;
+ mlxplat_mux_num = ARRAY_SIZE(mlxplat_default_mux_data);
+ mlxplat_mux_data = mlxplat_default_mux_data;
+ mlxplat_hotplug = &mlxplat_mlxcpld_nvlink_blade_data;
+ mlxplat_hotplug->deferred_nr =
+ mlxplat_msn21xx_channels[MLXPLAT_CPLD_GRP_CHNL_NUM - 1];
+ for (i = 0; i < mlxplat_mux_num; i++) {
+ mlxplat_mux_data[i].values = mlxplat_msn21xx_channels;
+ mlxplat_mux_data[i].n_values =
+ ARRAY_SIZE(mlxplat_msn21xx_channels);
+ }
+ mlxplat_regs_io = &mlxplat_nvlink_blade_regs_io_data;
+ mlxplat_i2c = &mlxplat_mlxcpld_i2c_ng_data;
+ mlxplat_regmap_config = &mlxplat_mlxcpld_regmap_config_ng400;
+
+ return 1;
+}
+
static const struct dmi_system_id mlxplat_dmi_table[] __initconst = {
{
.callback = mlxplat_dmi_default_wc_matched,
@@ -4612,6 +4990,13 @@ static const struct dmi_system_id mlxplat_dmi_table[] __initconst = {
},
},
{
+ .callback = mlxplat_dmi_default_eth_wc_blade_matched,
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "VMOD0005"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "HI139"),
+ },
+ },
+ {
.callback = mlxplat_dmi_qmb7xx_matched,
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "VMOD0005"),
@@ -4642,6 +5027,12 @@ static const struct dmi_system_id mlxplat_dmi_table[] __initconst = {
},
},
{
+ .callback = mlxplat_dmi_nvlink_blade_matched,
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "VMOD0015"),
+ },
+ },
+ {
.callback = mlxplat_dmi_msn274x_matched,
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"),
@@ -4830,22 +5221,20 @@ static int __init mlxplat_init(void)
nr = (nr == mlxplat_max_adap_num) ? -1 : nr;
if (mlxplat_i2c)
mlxplat_i2c->regmap = priv->regmap;
- priv->pdev_i2c = platform_device_register_resndata(
- &mlxplat_dev->dev, "i2c_mlxcpld",
- nr, mlxplat_mlxcpld_resources,
- ARRAY_SIZE(mlxplat_mlxcpld_resources),
- mlxplat_i2c, sizeof(*mlxplat_i2c));
+ priv->pdev_i2c = platform_device_register_resndata(&mlxplat_dev->dev, "i2c_mlxcpld",
+ nr, mlxplat_mlxcpld_resources,
+ ARRAY_SIZE(mlxplat_mlxcpld_resources),
+ mlxplat_i2c, sizeof(*mlxplat_i2c));
if (IS_ERR(priv->pdev_i2c)) {
err = PTR_ERR(priv->pdev_i2c);
goto fail_alloc;
}
for (i = 0; i < mlxplat_mux_num; i++) {
- priv->pdev_mux[i] = platform_device_register_resndata(
- &priv->pdev_i2c->dev,
- "i2c-mux-reg", i, NULL,
- 0, &mlxplat_mux_data[i],
- sizeof(mlxplat_mux_data[i]));
+ priv->pdev_mux[i] = platform_device_register_resndata(&priv->pdev_i2c->dev,
+ "i2c-mux-reg", i, NULL, 0,
+ &mlxplat_mux_data[i],
+ sizeof(mlxplat_mux_data[i]));
if (IS_ERR(priv->pdev_mux[i])) {
err = PTR_ERR(priv->pdev_mux[i]);
goto fail_platform_mux_register;
@@ -4853,16 +5242,18 @@ static int __init mlxplat_init(void)
}
/* Add hotplug driver */
- mlxplat_hotplug->regmap = priv->regmap;
- priv->pdev_hotplug = platform_device_register_resndata(
- &mlxplat_dev->dev, "mlxreg-hotplug",
- PLATFORM_DEVID_NONE,
- mlxplat_mlxcpld_resources,
- ARRAY_SIZE(mlxplat_mlxcpld_resources),
- mlxplat_hotplug, sizeof(*mlxplat_hotplug));
- if (IS_ERR(priv->pdev_hotplug)) {
- err = PTR_ERR(priv->pdev_hotplug);
- goto fail_platform_mux_register;
+ if (mlxplat_hotplug) {
+ mlxplat_hotplug->regmap = priv->regmap;
+ priv->pdev_hotplug =
+ platform_device_register_resndata(&mlxplat_dev->dev,
+ "mlxreg-hotplug", PLATFORM_DEVID_NONE,
+ mlxplat_mlxcpld_resources,
+ ARRAY_SIZE(mlxplat_mlxcpld_resources),
+ mlxplat_hotplug, sizeof(*mlxplat_hotplug));
+ if (IS_ERR(priv->pdev_hotplug)) {
+ err = PTR_ERR(priv->pdev_hotplug);
+ goto fail_platform_mux_register;
+ }
}
/* Set default registers. */
@@ -4875,24 +5266,26 @@ static int __init mlxplat_init(void)
}
/* Add LED driver. */
- mlxplat_led->regmap = priv->regmap;
- priv->pdev_led = platform_device_register_resndata(
- &mlxplat_dev->dev, "leds-mlxreg",
- PLATFORM_DEVID_NONE, NULL, 0,
- mlxplat_led, sizeof(*mlxplat_led));
- if (IS_ERR(priv->pdev_led)) {
- err = PTR_ERR(priv->pdev_led);
- goto fail_platform_hotplug_register;
+ if (mlxplat_led) {
+ mlxplat_led->regmap = priv->regmap;
+ priv->pdev_led =
+ platform_device_register_resndata(&mlxplat_dev->dev, "leds-mlxreg",
+ PLATFORM_DEVID_NONE, NULL, 0, mlxplat_led,
+ sizeof(*mlxplat_led));
+ if (IS_ERR(priv->pdev_led)) {
+ err = PTR_ERR(priv->pdev_led);
+ goto fail_platform_hotplug_register;
+ }
}
/* Add registers io access driver. */
if (mlxplat_regs_io) {
mlxplat_regs_io->regmap = priv->regmap;
- priv->pdev_io_regs = platform_device_register_resndata(
- &mlxplat_dev->dev, "mlxreg-io",
- PLATFORM_DEVID_NONE, NULL, 0,
- mlxplat_regs_io,
- sizeof(*mlxplat_regs_io));
+ priv->pdev_io_regs = platform_device_register_resndata(&mlxplat_dev->dev,
+ "mlxreg-io",
+ PLATFORM_DEVID_NONE, NULL,
+ 0, mlxplat_regs_io,
+ sizeof(*mlxplat_regs_io));
if (IS_ERR(priv->pdev_io_regs)) {
err = PTR_ERR(priv->pdev_io_regs);
goto fail_platform_led_register;
@@ -4902,11 +5295,10 @@ static int __init mlxplat_init(void)
/* Add FAN driver. */
if (mlxplat_fan) {
mlxplat_fan->regmap = priv->regmap;
- priv->pdev_fan = platform_device_register_resndata(
- &mlxplat_dev->dev, "mlxreg-fan",
- PLATFORM_DEVID_NONE, NULL, 0,
- mlxplat_fan,
- sizeof(*mlxplat_fan));
+ priv->pdev_fan = platform_device_register_resndata(&mlxplat_dev->dev, "mlxreg-fan",
+ PLATFORM_DEVID_NONE, NULL, 0,
+ mlxplat_fan,
+ sizeof(*mlxplat_fan));
if (IS_ERR(priv->pdev_fan)) {
err = PTR_ERR(priv->pdev_fan);
goto fail_platform_io_regs_register;
@@ -4920,11 +5312,10 @@ static int __init mlxplat_init(void)
for (j = 0; j < MLXPLAT_CPLD_WD_MAX_DEVS; j++) {
if (mlxplat_wd_data[j]) {
mlxplat_wd_data[j]->regmap = priv->regmap;
- priv->pdev_wd[j] = platform_device_register_resndata(
- &mlxplat_dev->dev, "mlx-wdt",
- j, NULL, 0,
- mlxplat_wd_data[j],
- sizeof(*mlxplat_wd_data[j]));
+ priv->pdev_wd[j] =
+ platform_device_register_resndata(&mlxplat_dev->dev, "mlx-wdt", j,
+ NULL, 0, mlxplat_wd_data[j],
+ sizeof(*mlxplat_wd_data[j]));
if (IS_ERR(priv->pdev_wd[j])) {
err = PTR_ERR(priv->pdev_wd[j]);
goto fail_platform_wd_register;
@@ -4949,9 +5340,11 @@ fail_platform_io_regs_register:
if (mlxplat_regs_io)
platform_device_unregister(priv->pdev_io_regs);
fail_platform_led_register:
- platform_device_unregister(priv->pdev_led);
+ if (mlxplat_led)
+ platform_device_unregister(priv->pdev_led);
fail_platform_hotplug_register:
- platform_device_unregister(priv->pdev_hotplug);
+ if (mlxplat_hotplug)
+ platform_device_unregister(priv->pdev_hotplug);
fail_platform_mux_register:
while (--i >= 0)
platform_device_unregister(priv->pdev_mux[i]);
@@ -4974,8 +5367,10 @@ static void __exit mlxplat_exit(void)
platform_device_unregister(priv->pdev_fan);
if (priv->pdev_io_regs)
platform_device_unregister(priv->pdev_io_regs);
- platform_device_unregister(priv->pdev_led);
- platform_device_unregister(priv->pdev_hotplug);
+ if (priv->pdev_led)
+ platform_device_unregister(priv->pdev_led);
+ if (priv->pdev_hotplug)
+ platform_device_unregister(priv->pdev_hotplug);
for (i = mlxplat_mux_num - 1; i >= 0 ; i--)
platform_device_unregister(priv->pdev_mux[i]);
diff --git a/drivers/platform/x86/p2sb.c b/drivers/platform/x86/p2sb.c
new file mode 100644
index 000000000000..fb2e141f3eb8
--- /dev/null
+++ b/drivers/platform/x86/p2sb.c
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Primary to Sideband (P2SB) bridge access support
+ *
+ * Copyright (c) 2017, 2021-2022 Intel Corporation.
+ *
+ * Authors: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ * Jonathan Yong <jonathan.yong@intel.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/export.h>
+#include <linux/pci.h>
+#include <linux/platform_data/x86/p2sb.h>
+
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+
+#define P2SBC 0xe0
+#define P2SBC_HIDE BIT(8)
+
+static const struct x86_cpu_id p2sb_cpu_ids[] = {
+ X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT, PCI_DEVFN(13, 0)),
+ X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_D, PCI_DEVFN(31, 1)),
+ X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_D, PCI_DEVFN(31, 1)),
+ X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE, PCI_DEVFN(31, 1)),
+ X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE_L, PCI_DEVFN(31, 1)),
+ X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE, PCI_DEVFN(31, 1)),
+ X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_L, PCI_DEVFN(31, 1)),
+ {}
+};
+
+static int p2sb_get_devfn(unsigned int *devfn)
+{
+ const struct x86_cpu_id *id;
+
+ id = x86_match_cpu(p2sb_cpu_ids);
+ if (!id)
+ return -ENODEV;
+
+ *devfn = (unsigned int)id->driver_data;
+ return 0;
+}
+
+static int p2sb_read_bar0(struct pci_dev *pdev, struct resource *mem)
+{
+ /* Copy resource from the first BAR of the device in question */
+ *mem = pdev->resource[0];
+ return 0;
+}
+
+static int p2sb_scan_and_read(struct pci_bus *bus, unsigned int devfn, struct resource *mem)
+{
+ struct pci_dev *pdev;
+ int ret;
+
+ pdev = pci_scan_single_device(bus, devfn);
+ if (!pdev)
+ return -ENODEV;
+
+ ret = p2sb_read_bar0(pdev, mem);
+
+ pci_stop_and_remove_bus_device(pdev);
+ return ret;
+}
+
+/**
+ * p2sb_bar - Get Primary to Sideband (P2SB) bridge device BAR
+ * @bus: PCI bus to communicate with
+ * @devfn: PCI slot and function to communicate with
+ * @mem: memory resource to be filled in
+ *
+ * The BIOS prevents the P2SB device from being enumerated by the PCI
+ * subsystem, so we need to unhide and hide it back to lookup the BAR.
+ *
+ * if @bus is NULL, the bus 0 in domain 0 will be used.
+ * If @devfn is 0, it will be replaced by devfn of the P2SB device.
+ *
+ * Caller must provide a valid pointer to @mem.
+ *
+ * Locking is handled by pci_rescan_remove_lock mutex.
+ *
+ * Return:
+ * 0 on success or appropriate errno value on error.
+ */
+int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem)
+{
+ struct pci_dev *pdev_p2sb;
+ unsigned int devfn_p2sb;
+ u32 value = P2SBC_HIDE;
+ int ret;
+
+ /* Get devfn for P2SB device itself */
+ ret = p2sb_get_devfn(&devfn_p2sb);
+ if (ret)
+ return ret;
+
+ /* if @bus is NULL, use bus 0 in domain 0 */
+ bus = bus ?: pci_find_bus(0, 0);
+
+ /*
+ * Prevent concurrent PCI bus scan from seeing the P2SB device and
+ * removing via sysfs while it is temporarily exposed.
+ */
+ pci_lock_rescan_remove();
+
+ /* Unhide the P2SB device, if needed */
+ pci_bus_read_config_dword(bus, devfn_p2sb, P2SBC, &value);
+ if (value & P2SBC_HIDE)
+ pci_bus_write_config_dword(bus, devfn_p2sb, P2SBC, 0);
+
+ pdev_p2sb = pci_scan_single_device(bus, devfn_p2sb);
+ if (devfn)
+ ret = p2sb_scan_and_read(bus, devfn, mem);
+ else
+ ret = p2sb_read_bar0(pdev_p2sb, mem);
+ pci_stop_and_remove_bus_device(pdev_p2sb);
+
+ /* Hide the P2SB device, if it was hidden */
+ if (value & P2SBC_HIDE)
+ pci_bus_write_config_dword(bus, devfn_p2sb, P2SBC, P2SBC_HIDE);
+
+ pci_unlock_rescan_remove();
+
+ if (ret)
+ return ret;
+
+ if (mem->flags == 0)
+ return -ENODEV;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(p2sb_bar);
diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c
index 615e39cbbbf1..d9a095d2c0eb 100644
--- a/drivers/platform/x86/panasonic-laptop.c
+++ b/drivers/platform/x86/panasonic-laptop.c
@@ -998,19 +998,23 @@ static int acpi_pcc_hotkey_add(struct acpi_device *device)
pr_err("Couldn't retrieve BIOS data\n");
goto out_input;
}
- /* initialize backlight */
- memset(&props, 0, sizeof(struct backlight_properties));
- props.type = BACKLIGHT_PLATFORM;
- props.max_brightness = pcc->sinf[SINF_AC_MAX_BRIGHT];
- pcc->backlight = backlight_device_register("panasonic", NULL, pcc,
- &pcc_backlight_ops, &props);
- if (IS_ERR(pcc->backlight)) {
- result = PTR_ERR(pcc->backlight);
- goto out_input;
- }
- /* read the initial brightness setting from the hardware */
- pcc->backlight->props.brightness = pcc->sinf[SINF_AC_CUR_BRIGHT];
+ if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
+ /* initialize backlight */
+ memset(&props, 0, sizeof(struct backlight_properties));
+ props.type = BACKLIGHT_PLATFORM;
+ props.max_brightness = pcc->sinf[SINF_AC_MAX_BRIGHT];
+
+ pcc->backlight = backlight_device_register("panasonic", NULL, pcc,
+ &pcc_backlight_ops, &props);
+ if (IS_ERR(pcc->backlight)) {
+ result = PTR_ERR(pcc->backlight);
+ goto out_input;
+ }
+
+ /* read the initial brightness setting from the hardware */
+ pcc->backlight->props.brightness = pcc->sinf[SINF_AC_CUR_BRIGHT];
+ }
/* Reset initial sticky key mode since the hardware register state is not consistent */
acpi_pcc_write_sset(pcc, SINF_STICKY_KEY, 0);
diff --git a/drivers/platform/x86/pmc_atom.c b/drivers/platform/x86/pmc_atom.c
index b8b1ed1406de..154317e9910d 100644
--- a/drivers/platform/x86/pmc_atom.c
+++ b/drivers/platform/x86/pmc_atom.c
@@ -389,21 +389,16 @@ static const struct dmi_system_id critclk_systems[] = {
},
},
{
- /* pmc_plt_clk0 - 3 are used for the 4 ethernet controllers */
- .ident = "Lex 3I380D",
+ /*
+ * Lex System / Lex Computech Co. makes a lot of Bay Trail
+ * based embedded boards which often come with multiple
+ * ethernet controllers using multiple pmc_plt_clks. See:
+ * https://www.lex.com.tw/products/embedded-ipc-board/
+ */
+ .ident = "Lex BayTrail",
.callback = dmi_callback,
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Lex BayTrail"),
- DMI_MATCH(DMI_PRODUCT_NAME, "3I380D"),
- },
- },
- {
- /* pmc_plt_clk* - are used for ethernet controllers */
- .ident = "Lex 2I385SW",
- .callback = dmi_callback,
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Lex BayTrail"),
- DMI_MATCH(DMI_PRODUCT_NAME, "2I385SW"),
},
},
{
diff --git a/drivers/platform/x86/serial-multi-instantiate.c b/drivers/platform/x86/serial-multi-instantiate.c
index 1e8063b7c169..67feed25c9db 100644
--- a/drivers/platform/x86/serial-multi-instantiate.c
+++ b/drivers/platform/x86/serial-multi-instantiate.c
@@ -61,36 +61,35 @@ static int smi_get_irq(struct platform_device *pdev, struct acpi_device *adev,
default:
return 0;
}
-
if (ret < 0)
- dev_err_probe(&pdev->dev, ret, "Error requesting irq at index %d: %d\n",
- inst->irq_idx, ret);
+ return dev_err_probe(&pdev->dev, ret, "Error requesting irq at index %d\n",
+ inst->irq_idx);
return ret;
}
static void smi_devs_unregister(struct smi *smi)
{
- while (smi->i2c_num > 0)
- i2c_unregister_device(smi->i2c_devs[--smi->i2c_num]);
+ while (smi->i2c_num--)
+ i2c_unregister_device(smi->i2c_devs[smi->i2c_num]);
- while (smi->spi_num > 0)
- spi_unregister_device(smi->spi_devs[--smi->spi_num]);
+ while (smi->spi_num--)
+ spi_unregister_device(smi->spi_devs[smi->spi_num]);
}
/**
* smi_spi_probe - Instantiate multiple SPI devices from inst array
* @pdev: Platform device
- * @adev: ACPI device
* @smi: Internal struct for Serial multi instantiate driver
* @inst_array: Array of instances to probe
*
* Returns the number of SPI devices instantiate, Zero if none is found or a negative error code.
*/
-static int smi_spi_probe(struct platform_device *pdev, struct acpi_device *adev, struct smi *smi,
+static int smi_spi_probe(struct platform_device *pdev, struct smi *smi,
const struct smi_instance *inst_array)
{
struct device *dev = &pdev->dev;
+ struct acpi_device *adev = ACPI_COMPANION(dev);
struct spi_controller *ctlr;
struct spi_device *spi_dev;
char name[50];
@@ -99,8 +98,8 @@ static int smi_spi_probe(struct platform_device *pdev, struct acpi_device *adev,
ret = acpi_spi_count_resources(adev);
if (ret < 0)
return ret;
- else if (!ret)
- return -ENODEV;
+ if (!ret)
+ return -ENOENT;
count = ret;
@@ -112,9 +111,8 @@ static int smi_spi_probe(struct platform_device *pdev, struct acpi_device *adev,
spi_dev = acpi_spi_device_alloc(NULL, adev, i);
if (IS_ERR(spi_dev)) {
- ret = PTR_ERR(spi_dev);
- dev_err_probe(dev, ret, "failed to allocate SPI device %s from ACPI: %d\n",
- dev_name(&adev->dev), ret);
+ ret = dev_err_probe(dev, PTR_ERR(spi_dev), "failed to allocate SPI device %s from ACPI\n",
+ dev_name(&adev->dev));
goto error;
}
@@ -135,9 +133,8 @@ static int smi_spi_probe(struct platform_device *pdev, struct acpi_device *adev,
ret = spi_add_device(spi_dev);
if (ret) {
- dev_err_probe(&ctlr->dev, ret,
- "failed to add SPI device %s from ACPI: %d\n",
- dev_name(&adev->dev), ret);
+ dev_err_probe(&ctlr->dev, ret, "failed to add SPI device %s from ACPI\n",
+ dev_name(&adev->dev));
spi_dev_put(spi_dev);
goto error;
}
@@ -166,25 +163,25 @@ error:
/**
* smi_i2c_probe - Instantiate multiple I2C devices from inst array
* @pdev: Platform device
- * @adev: ACPI device
* @smi: Internal struct for Serial multi instantiate driver
* @inst_array: Array of instances to probe
*
* Returns the number of I2C devices instantiate, Zero if none is found or a negative error code.
*/
-static int smi_i2c_probe(struct platform_device *pdev, struct acpi_device *adev, struct smi *smi,
+static int smi_i2c_probe(struct platform_device *pdev, struct smi *smi,
const struct smi_instance *inst_array)
{
struct i2c_board_info board_info = {};
struct device *dev = &pdev->dev;
+ struct acpi_device *adev = ACPI_COMPANION(dev);
char name[32];
int i, ret, count;
ret = i2c_acpi_client_count(adev);
if (ret < 0)
return ret;
- else if (!ret)
- return -ENODEV;
+ if (!ret)
+ return -ENOENT;
count = ret;
@@ -230,12 +227,8 @@ static int smi_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
const struct smi_node *node;
- struct acpi_device *adev;
struct smi *smi;
-
- adev = ACPI_COMPANION(dev);
- if (!adev)
- return -ENODEV;
+ int ret;
node = device_get_match_data(dev);
if (!node) {
@@ -251,19 +244,25 @@ static int smi_probe(struct platform_device *pdev)
switch (node->bus_type) {
case SMI_I2C:
- return smi_i2c_probe(pdev, adev, smi, node->instances);
+ return smi_i2c_probe(pdev, smi, node->instances);
case SMI_SPI:
- return smi_spi_probe(pdev, adev, smi, node->instances);
+ return smi_spi_probe(pdev, smi, node->instances);
case SMI_AUTO_DETECT:
- if (i2c_acpi_client_count(adev) > 0)
- return smi_i2c_probe(pdev, adev, smi, node->instances);
- else
- return smi_spi_probe(pdev, adev, smi, node->instances);
+ /*
+ * For backwards-compatibility with the existing nodes I2C
+ * is checked first and if such entries are found ONLY I2C
+ * devices are created. Since some existing nodes that were
+ * already handled by this driver could also contain unrelated
+ * SpiSerialBus nodes that were previously ignored, and this
+ * preserves that behavior.
+ */
+ ret = smi_i2c_probe(pdev, smi, node->instances);
+ if (ret != -ENOENT)
+ return ret;
+ return smi_spi_probe(pdev, smi, node->instances);
default:
return -EINVAL;
}
-
- return 0; /* never reached */
}
static int smi_remove(struct platform_device *pdev)
@@ -325,8 +324,8 @@ static const struct smi_node cs35l41_hda = {
static const struct acpi_device_id smi_acpi_ids[] = {
{ "BSG1160", (unsigned long)&bsg1160_data },
{ "BSG2150", (unsigned long)&bsg2150_data },
- { "INT3515", (unsigned long)&int3515_data },
{ "CSC3551", (unsigned long)&cs35l41_hda },
+ { "INT3515", (unsigned long)&int3515_data },
/* Non-conforming _HID for Cirrus Logic already released */
{ "CLSA0100", (unsigned long)&cs35l41_hda },
{ }
diff --git a/drivers/platform/x86/simatic-ipc.c b/drivers/platform/x86/simatic-ipc.c
index b599cda5ba3c..ca3647b751d5 100644
--- a/drivers/platform/x86/simatic-ipc.c
+++ b/drivers/platform/x86/simatic-ipc.c
@@ -51,6 +51,7 @@ static int register_platform_devices(u32 station_id)
{
u8 ledmode = SIMATIC_IPC_DEVICE_NONE;
u8 wdtmode = SIMATIC_IPC_DEVICE_NONE;
+ char *pdevname = KBUILD_MODNAME "_leds";
int i;
platform_data.devmode = SIMATIC_IPC_DEVICE_NONE;
@@ -64,10 +65,12 @@ static int register_platform_devices(u32 station_id)
}
if (ledmode != SIMATIC_IPC_DEVICE_NONE) {
+ if (ledmode == SIMATIC_IPC_DEVICE_127E)
+ pdevname = KBUILD_MODNAME "_leds_gpio";
platform_data.devmode = ledmode;
ipc_led_platform_device =
platform_device_register_data(NULL,
- KBUILD_MODNAME "_leds", PLATFORM_DEVID_NONE,
+ pdevname, PLATFORM_DEVID_NONE,
&platform_data,
sizeof(struct simatic_ipc_platform));
if (IS_ERR(ipc_led_platform_device))
@@ -101,44 +104,6 @@ static int register_platform_devices(u32 station_id)
return 0;
}
-/* FIXME: this should eventually be done with generic P2SB discovery code
- * the individual drivers for watchdogs and LEDs access memory that implements
- * GPIO, but pinctrl will not come up because of missing ACPI entries
- *
- * While there is no conflict a cleaner solution would be to somehow bring up
- * pinctrl even with these ACPI entries missing, and base the drivers on pinctrl.
- * After which the following function could be dropped, together with the code
- * poking the memory.
- */
-/*
- * Get membase address from PCI, used in leds and wdt module. Here we read
- * the bar0. The final address calculation is done in the appropriate modules
- */
-u32 simatic_ipc_get_membase0(unsigned int p2sb)
-{
- struct pci_bus *bus;
- u32 bar0 = 0;
- /*
- * The GPIO memory is in bar0 of the hidden P2SB device.
- * Unhide the device to have a quick look at it, before we hide it
- * again.
- * Also grab the pci rescan lock so that device does not get discovered
- * and remapped while it is visible.
- * This code is inspired by drivers/mfd/lpc_ich.c
- */
- bus = pci_find_bus(0, 0);
- pci_lock_rescan_remove();
- pci_bus_write_config_byte(bus, p2sb, 0xE1, 0x0);
- pci_bus_read_config_dword(bus, p2sb, PCI_BASE_ADDRESS_0, &bar0);
-
- bar0 &= ~0xf;
- pci_bus_write_config_byte(bus, p2sb, 0xE1, 0x1);
- pci_unlock_rescan_remove();
-
- return bar0;
-}
-EXPORT_SYMBOL(simatic_ipc_get_membase0);
-
static int __init simatic_ipc_init_module(void)
{
const struct dmi_system_id *match;
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index d8d0c0bed5e9..07ef05f727a2 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -4341,7 +4341,7 @@ sony_pic_read_possible_resource(struct acpi_resource *resource, void *context)
{
struct acpi_resource_irq *p = &resource->data.irq;
struct sony_pic_irq *interrupt = NULL;
- if (!p || !p->interrupt_count) {
+ if (!p->interrupt_count) {
/*
* IRQ descriptors may have no IRQ# bits set,
* particularly those those w/ _STA disabled
@@ -4374,11 +4374,6 @@ sony_pic_read_possible_resource(struct acpi_resource *resource, void *context)
struct acpi_resource_io *io = &resource->data.io;
struct sony_pic_ioport *ioport =
list_first_entry(&dev->ioports, struct sony_pic_ioport, list);
- if (!io) {
- dprintk("Blank IO resource\n");
- return AE_OK;
- }
-
if (!ioport->io1.minimum) {
memcpy(&ioport->io1, io, sizeof(*io));
dprintk("IO1 at 0x%.4x (0x%.2x)\n", ioport->io1.minimum,
diff --git a/drivers/platform/x86/system76_acpi.c b/drivers/platform/x86/system76_acpi.c
index 7299ad08c838..958df41ad509 100644
--- a/drivers/platform/x86/system76_acpi.c
+++ b/drivers/platform/x86/system76_acpi.c
@@ -339,7 +339,7 @@ static ssize_t kb_led_color_show(
struct led_classdev *led;
struct system76_data *data;
- led = (struct led_classdev *)dev->driver_data;
+ led = dev_get_drvdata(dev);
data = container_of(led, struct system76_data, kb_led);
return sysfs_emit(buf, "%06X\n", data->kb_color);
}
@@ -356,7 +356,7 @@ static ssize_t kb_led_color_store(
unsigned int val;
int ret;
- led = (struct led_classdev *)dev->driver_data;
+ led = dev_get_drvdata(dev);
data = container_of(led, struct system76_data, kb_led);
ret = kstrtouint(buf, 16, &val);
if (ret)
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 502dcd1c33b7..22d4e8633e30 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -34,46 +34,51 @@
* thanks to Chris Wright <chrisw@osdl.org>
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/sched.h>
-#include <linux/sched/signal.h>
-#include <linux/kthread.h>
-#include <linux/freezer.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/nvram.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/sysfs.h>
+#include <linux/acpi.h>
#include <linux/backlight.h>
#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/dmi.h>
#include <linux/fb.h>
-#include <linux/platform_device.h>
+#include <linux/freezer.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/init.h>
#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/rfkill.h>
-#include <linux/dmi.h>
#include <linux/jiffies.h>
-#include <linux/workqueue.h>
-#include <linux/acpi.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/leds.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/nvram.h>
#include <linux/pci.h>
-#include <linux/power_supply.h>
+#include <linux/platform_device.h>
#include <linux/platform_profile.h>
-#include <sound/core.h>
-#include <sound/control.h>
-#include <sound/initval.h>
+#include <linux/power_supply.h>
+#include <linux/proc_fs.h>
+#include <linux/rfkill.h>
+#include <linux/sched.h>
+#include <linux/sched/signal.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/string_helpers.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
#include <linux/uaccess.h>
+#include <linux/workqueue.h>
+
#include <acpi/battery.h>
#include <acpi/video.h>
+
#include <drm/drm_privacy_screen_driver.h>
+
+#include <sound/control.h>
+#include <sound/core.h>
+#include <sound/initval.h>
+
#include "dual_accel_detect.h"
/* ThinkPad CMOS commands */
@@ -159,6 +164,7 @@ enum tpacpi_hkey_event_t {
TP_HKEY_EV_VOL_DOWN = 0x1016, /* Volume down or unmute */
TP_HKEY_EV_VOL_MUTE = 0x1017, /* Mixer output mute */
TP_HKEY_EV_PRIVACYGUARD_TOGGLE = 0x130f, /* Toggle priv.guard on/off */
+ TP_HKEY_EV_AMT_TOGGLE = 0x131a, /* Toggle AMT on/off */
/* Reasons for waking up from S3/S4 */
TP_HKEY_EV_WKUP_S3_UNDOCK = 0x2304, /* undock requested, S3 */
@@ -257,8 +263,6 @@ enum tpacpi_hkey_event_t {
#define TPACPI_DBG_BRGHT 0x0020
#define TPACPI_DBG_MIXER 0x0040
-#define onoff(status, bit) ((status) & (1 << (bit)) ? "on" : "off")
-#define enabled(status, bit) ((status) & (1 << (bit)) ? "enabled" : "disabled")
#define strlencmp(a, b) (strncmp((a), (b), strlen(b)))
@@ -1312,9 +1316,7 @@ static int tpacpi_rfk_procfs_read(const enum tpacpi_rfk_id id, struct seq_file *
return status;
}
- seq_printf(m, "status:\t\t%s\n",
- (status == TPACPI_RFK_RADIO_ON) ?
- "enabled" : "disabled");
+ seq_printf(m, "status:\t\t%s\n", str_enabled_disabled(status == TPACPI_RFK_RADIO_ON));
seq_printf(m, "commands:\tenable, disable\n");
}
@@ -1341,8 +1343,7 @@ static int tpacpi_rfk_procfs_write(const enum tpacpi_rfk_id id, char *buf)
if (status != -1) {
tpacpi_disclose_usertask("procfs", "attempt to %s %s\n",
- (status == TPACPI_RFK_RADIO_ON) ?
- "enable" : "disable",
+ str_enable_disable(status == TPACPI_RFK_RADIO_ON),
tpacpi_rfkill_names[id]);
res = (tpacpi_rfkill_switches[id]->ops->set_status)(status);
tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[id]);
@@ -3499,8 +3500,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
if (acpi_evalf(hkey_handle, &status, "WLSW", "qd")) {
tp_features.hotkey_wlsw = 1;
radiosw_state = !!status;
- pr_info("radio switch found; radios are %s\n",
- enabled(status, 0));
+ pr_info("radio switch found; radios are %s\n", str_enabled_disabled(status & BIT(0)));
}
tabletsw_state = hotkey_init_tablet_mode();
@@ -3735,6 +3735,7 @@ static bool hotkey_notify_extended_hotkey(const u32 hkey)
switch (hkey) {
case TP_HKEY_EV_PRIVACYGUARD_TOGGLE:
+ case TP_HKEY_EV_AMT_TOGGLE:
tpacpi_driver_event(hkey);
return true;
}
@@ -4159,7 +4160,7 @@ static int hotkey_read(struct seq_file *m)
if (res)
return res;
- seq_printf(m, "status:\t\t%s\n", enabled(status, 0));
+ seq_printf(m, "status:\t\t%s\n", str_enabled_disabled(status & BIT(0)));
if (hotkey_all_mask) {
seq_printf(m, "mask:\t\t0x%08x\n", hotkey_user_mask);
seq_printf(m, "commands:\tenable, disable, reset, <mask>\n");
@@ -4292,9 +4293,8 @@ static int bluetooth_set_status(enum tpacpi_rfkill_state state)
{
int status;
- vdbg_printk(TPACPI_DBG_RFKILL,
- "will attempt to %s bluetooth\n",
- (state == TPACPI_RFK_RADIO_ON) ? "enable" : "disable");
+ vdbg_printk(TPACPI_DBG_RFKILL, "will attempt to %s bluetooth\n",
+ str_enable_disable(state == TPACPI_RFK_RADIO_ON));
#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
if (dbg_bluetoothemul) {
@@ -4659,9 +4659,8 @@ static int wan_set_status(enum tpacpi_rfkill_state state)
{
int status;
- vdbg_printk(TPACPI_DBG_RFKILL,
- "will attempt to %s wwan\n",
- (state == TPACPI_RFK_RADIO_ON) ? "enable" : "disable");
+ vdbg_printk(TPACPI_DBG_RFKILL, "will attempt to %s wwan\n",
+ str_enable_disable(state == TPACPI_RFK_RADIO_ON));
#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
if (dbg_wwanemul) {
@@ -4837,9 +4836,8 @@ static int uwb_set_status(enum tpacpi_rfkill_state state)
{
int status;
- vdbg_printk(TPACPI_DBG_RFKILL,
- "will attempt to %s UWB\n",
- (state == TPACPI_RFK_RADIO_ON) ? "enable" : "disable");
+ vdbg_printk(TPACPI_DBG_RFKILL, "will attempt to %s UWB\n",
+ str_enable_disable(state == TPACPI_RFK_RADIO_ON));
#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
if (dbg_uwbemul) {
@@ -5193,11 +5191,11 @@ static int video_read(struct seq_file *m)
return autosw;
seq_printf(m, "status:\t\tsupported\n");
- seq_printf(m, "lcd:\t\t%s\n", enabled(status, 0));
- seq_printf(m, "crt:\t\t%s\n", enabled(status, 1));
+ seq_printf(m, "lcd:\t\t%s\n", str_enabled_disabled(status & BIT(0)));
+ seq_printf(m, "crt:\t\t%s\n", str_enabled_disabled(status & BIT(1)));
if (video_supported == TPACPI_VIDEO_NEW)
- seq_printf(m, "dvi:\t\t%s\n", enabled(status, 3));
- seq_printf(m, "auto:\t\t%s\n", enabled(autosw, 0));
+ seq_printf(m, "dvi:\t\t%s\n", str_enabled_disabled(status & BIT(3)));
+ seq_printf(m, "auto:\t\t%s\n", str_enabled_disabled(autosw & BIT(0)));
seq_printf(m, "commands:\tlcd_enable, lcd_disable\n");
seq_printf(m, "commands:\tcrt_enable, crt_disable\n");
if (video_supported == TPACPI_VIDEO_NEW)
@@ -5628,7 +5626,7 @@ static int light_read(struct seq_file *m)
status = light_get_status();
if (status < 0)
return status;
- seq_printf(m, "status:\t\t%s\n", onoff(status, 0));
+ seq_printf(m, "status:\t\t%s\n", str_on_off(status & BIT(0)));
seq_printf(m, "commands:\ton, off\n");
}
@@ -6084,9 +6082,7 @@ static int __init led_init(struct ibm_init_struct *iibm)
return 0;
}
-#define str_led_status(s) \
- ((s) == TPACPI_LED_OFF ? "off" : \
- ((s) == TPACPI_LED_ON ? "on" : "blinking"))
+#define str_led_status(s) ((s) >= TPACPI_LED_BLINK ? "blinking" : str_on_off(s))
static int led_read(struct seq_file *m)
{
@@ -6103,8 +6099,7 @@ static int led_read(struct seq_file *m)
status = led_get_status(i);
if (status < 0)
return -EIO;
- seq_printf(m, "%d:\t\t%s\n",
- i, str_led_status(status));
+ seq_printf(m, "%d:\t\t%s\n", i, str_led_status(status));
}
}
@@ -6797,10 +6792,7 @@ static int brightness_set(unsigned int value)
static int brightness_update_status(struct backlight_device *bd)
{
- unsigned int level =
- (bd->props.fb_blank == FB_BLANK_UNBLANK &&
- bd->props.power == FB_BLANK_UNBLANK) ?
- bd->props.brightness : 0;
+ int level = backlight_get_brightness(bd);
dbg_printk(TPACPI_DBG_BRGHT,
"backlight: attempt to set level to %d\n",
@@ -7830,8 +7822,7 @@ static int volume_read(struct seq_file *m)
seq_printf(m, "level:\t\t%d\n",
status & TP_EC_AUDIO_LVL_MSK);
- seq_printf(m, "mute:\t\t%s\n",
- onoff(status, TP_EC_AUDIO_MUTESW));
+ seq_printf(m, "mute:\t\t%s\n", str_on_off(status & BIT(TP_EC_AUDIO_MUTESW)));
if (volume_control_allowed) {
seq_printf(m, "commands:\tunmute, mute\n");
@@ -9060,7 +9051,7 @@ static int fan_read(struct seq_file *m)
seq_printf(m, "status:\t\t%s\n"
"level:\t\t%d\n",
- (status != 0) ? "enabled" : "disabled", status);
+ str_enabled_disabled(status), status);
break;
case TPACPI_FAN_RD_TPEC:
@@ -9069,8 +9060,7 @@ static int fan_read(struct seq_file *m)
if (rc)
return rc;
- seq_printf(m, "status:\t\t%s\n",
- (status != 0) ? "enabled" : "disabled");
+ seq_printf(m, "status:\t\t%s\n", str_enabled_disabled(status));
rc = fan_get_speed(&speed);
if (rc < 0)
@@ -10268,6 +10258,7 @@ static struct ibm_struct proxsensor_driver_data = {
#define DYTC_CMD_FUNC_CAP 3 /* To get DYTC capabilities */
#define DYTC_FC_MMC 27 /* MMC Mode supported */
#define DYTC_FC_PSC 29 /* PSC Mode supported */
+#define DYTC_FC_AMT 31 /* AMT mode supported */
#define DYTC_GET_FUNCTION_BIT 8 /* Bits 8-11 - function setting */
#define DYTC_GET_MODE_BIT 12 /* Bits 12-15 - mode setting */
@@ -10280,6 +10271,10 @@ static struct ibm_struct proxsensor_driver_data = {
#define DYTC_FUNCTION_CQL 1 /* Function = 1, lap mode */
#define DYTC_FUNCTION_MMC 11 /* Function = 11, MMC mode */
#define DYTC_FUNCTION_PSC 13 /* Function = 13, PSC mode */
+#define DYTC_FUNCTION_AMT 15 /* Function = 15, AMT mode */
+
+#define DYTC_MODE_AMT_ENABLE 0x1 /* Enable AMT (in balanced mode) */
+#define DYTC_MODE_AMT_DISABLE 0xF /* Disable AMT (in other modes) */
#define DYTC_MODE_MMC_PERFORM 2 /* High power mode aka performance */
#define DYTC_MODE_MMC_LOWPOWER 3 /* Low power mode */
@@ -10300,6 +10295,8 @@ static struct ibm_struct proxsensor_driver_data = {
#define DYTC_DISABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_MMC_BALANCE, 0)
#define DYTC_ENABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_MMC_BALANCE, 1)
+static int dytc_control_amt(bool enable);
+static bool dytc_amt_active;
static enum platform_profile_option dytc_current_profile;
static atomic_t dytc_ignore_event = ATOMIC_INIT(0);
@@ -10382,6 +10379,30 @@ static int dytc_profile_get(struct platform_profile_handler *pprof,
return 0;
}
+static int dytc_control_amt(bool enable)
+{
+ int dummy;
+ int err;
+ int cmd;
+
+ if (!(dytc_capabilities & BIT(DYTC_FC_AMT))) {
+ pr_warn("Attempting to toggle AMT on a system that doesn't advertise support\n");
+ return -ENODEV;
+ }
+
+ if (enable)
+ cmd = DYTC_SET_COMMAND(DYTC_FUNCTION_AMT, DYTC_MODE_AMT_ENABLE, enable);
+ else
+ cmd = DYTC_SET_COMMAND(DYTC_FUNCTION_AMT, DYTC_MODE_AMT_DISABLE, enable);
+
+ pr_debug("%sabling AMT (cmd 0x%x)", enable ? "en":"dis", cmd);
+ err = dytc_command(cmd, &dummy);
+ if (err)
+ return err;
+ dytc_amt_active = enable;
+ return 0;
+}
+
/*
* Helper function - check if we are in CQL mode and if we are
* - disable CQL,
@@ -10464,6 +10485,9 @@ static int dytc_profile_set(struct platform_profile_handler *pprof,
err = dytc_command(DYTC_SET_COMMAND(DYTC_FUNCTION_PSC, perfmode, 1), &output);
if (err)
goto unlock;
+ /* system supports AMT, activate it when on balanced */
+ if (dytc_capabilities & BIT(DYTC_FC_AMT))
+ dytc_control_amt(profile == PLATFORM_PROFILE_BALANCED);
}
/* Success - update current profile */
dytc_current_profile = profile;
@@ -10568,6 +10592,11 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
/* Ensure initial values are correct */
dytc_profile_refresh();
+ /* Set AMT correctly now we know current profile */
+ if ((dytc_capabilities & BIT(DYTC_FC_PSC)) &&
+ (dytc_capabilities & BIT(DYTC_FC_AMT)))
+ dytc_control_amt(dytc_current_profile == PLATFORM_PROFILE_BALANCED);
+
return 0;
}
@@ -11011,6 +11040,15 @@ static void tpacpi_driver_event(const unsigned int hkey_event)
if (changed)
drm_privacy_screen_call_notifier_chain(lcdshadow_dev);
}
+ if (hkey_event == TP_HKEY_EV_AMT_TOGGLE) {
+ /* If we're enabling AMT we need to force balanced mode */
+ if (!dytc_amt_active)
+ /* This will also set AMT mode enabled */
+ dytc_profile_set(NULL, PLATFORM_PROFILE_BALANCED);
+ else
+ dytc_control_amt(!dytc_amt_active);
+ }
+
}
static void hotkey_driver_event(const unsigned int scancode)
diff --git a/drivers/power/supply/surface_battery.c b/drivers/power/supply/surface_battery.c
index 5ec2e6bb2465..540707882bb0 100644
--- a/drivers/power/supply/surface_battery.c
+++ b/drivers/power/supply/surface_battery.c
@@ -802,7 +802,7 @@ static int spwr_battery_register(struct spwr_battery_device *bat)
if (IS_ERR(bat->psy))
return PTR_ERR(bat->psy);
- return ssam_notifier_register(bat->sdev->ctrl, &bat->notif);
+ return ssam_device_notifier_register(bat->sdev, &bat->notif);
}
@@ -837,7 +837,7 @@ static void surface_battery_remove(struct ssam_device *sdev)
{
struct spwr_battery_device *bat = ssam_device_get_drvdata(sdev);
- ssam_notifier_unregister(sdev->ctrl, &bat->notif);
+ ssam_device_notifier_unregister(sdev, &bat->notif);
cancel_delayed_work_sync(&bat->update_work);
}
diff --git a/drivers/power/supply/surface_charger.c b/drivers/power/supply/surface_charger.c
index a060c36c7766..59182d55742d 100644
--- a/drivers/power/supply/surface_charger.c
+++ b/drivers/power/supply/surface_charger.c
@@ -216,7 +216,7 @@ static int spwr_ac_register(struct spwr_ac_device *ac)
if (IS_ERR(ac->psy))
return PTR_ERR(ac->psy);
- return ssam_notifier_register(ac->sdev->ctrl, &ac->notif);
+ return ssam_device_notifier_register(ac->sdev, &ac->notif);
}
@@ -251,7 +251,7 @@ static void surface_ac_remove(struct ssam_device *sdev)
{
struct spwr_ac_device *ac = ssam_device_get_drvdata(sdev);
- ssam_notifier_unregister(sdev->ctrl, &ac->notif);
+ ssam_device_notifier_unregister(sdev, &ac->notif);
}
static const struct spwr_psy_properties spwr_psy_props_adp1 = {
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 32fd37698932..0796f6a9e8ff 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1647,6 +1647,7 @@ config SIEMENS_SIMATIC_IPC_WDT
tristate "Siemens Simatic IPC Watchdog"
depends on SIEMENS_SIMATIC_IPC
select WATCHDOG_CORE
+ select P2SB
help
This driver adds support for several watchdogs found in Industrial
PCs from Siemens.
diff --git a/drivers/watchdog/simatic-ipc-wdt.c b/drivers/watchdog/simatic-ipc-wdt.c
index 8bac793c63fb..6599695dc672 100644
--- a/drivers/watchdog/simatic-ipc-wdt.c
+++ b/drivers/watchdog/simatic-ipc-wdt.c
@@ -16,6 +16,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/platform_data/x86/p2sb.h>
#include <linux/platform_data/x86/simatic-ipc-base.h>
#include <linux/platform_device.h>
#include <linux/sizes.h>
@@ -54,9 +55,9 @@ static struct resource io_resource_trigger =
DEFINE_RES_IO_NAMED(WD_TRIGGER_IOADR, SZ_1,
KBUILD_MODNAME " WD_TRIGGER_IOADR");
-/* the actual start will be discovered with pci, 0 is a placeholder */
+/* the actual start will be discovered with p2sb, 0 is a placeholder */
static struct resource mem_resource =
- DEFINE_RES_MEM_NAMED(0, SZ_4, "WD_RESET_BASE_ADR");
+ DEFINE_RES_MEM_NAMED(0, 0, "WD_RESET_BASE_ADR");
static u32 wd_timeout_table[] = {2, 4, 6, 8, 16, 32, 48, 64 };
static void __iomem *wd_reset_base_addr;
@@ -150,6 +151,7 @@ static int simatic_ipc_wdt_probe(struct platform_device *pdev)
struct simatic_ipc_platform *plat = pdev->dev.platform_data;
struct device *dev = &pdev->dev;
struct resource *res;
+ int ret;
switch (plat->devmode) {
case SIMATIC_IPC_DEVICE_227E:
@@ -190,15 +192,14 @@ static int simatic_ipc_wdt_probe(struct platform_device *pdev)
if (plat->devmode == SIMATIC_IPC_DEVICE_427E) {
res = &mem_resource;
- /* get GPIO base from PCI */
- res->start = simatic_ipc_get_membase0(PCI_DEVFN(0x1f, 1));
- if (res->start == 0)
- return -ENODEV;
+ ret = p2sb_bar(NULL, 0, res);
+ if (ret)
+ return ret;
/* do the final address calculation */
res->start = res->start + (GPIO_COMMUNITY0_PORT_ID << 16) +
PAD_CFG_DW0_GPP_A_23;
- res->end += res->start;
+ res->end = res->start + SZ_4 - 1;
wd_reset_base_addr = devm_ioremap_resource(dev, res);
if (IS_ERR(wd_reset_base_addr))
diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h
index a571b47ff362..98f2b2f20f3e 100644
--- a/include/linux/platform_data/x86/asus-wmi.h
+++ b/include/linux/platform_data/x86/asus-wmi.h
@@ -49,6 +49,7 @@
#define ASUS_WMI_DEVID_LED4 0x00020014
#define ASUS_WMI_DEVID_LED5 0x00020015
#define ASUS_WMI_DEVID_LED6 0x00020016
+#define ASUS_WMI_DEVID_MICMUTE_LED 0x00040017
/* Backlight and Brightness */
#define ASUS_WMI_DEVID_ALS_ENABLE 0x00050001 /* Ambient Light Sensor */
diff --git a/include/linux/platform_data/x86/p2sb.h b/include/linux/platform_data/x86/p2sb.h
new file mode 100644
index 000000000000..a1d5fddc8f13
--- /dev/null
+++ b/include/linux/platform_data/x86/p2sb.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Primary to Sideband (P2SB) bridge access support
+ */
+
+#ifndef _PLATFORM_DATA_X86_P2SB_H
+#define _PLATFORM_DATA_X86_P2SB_H
+
+#include <linux/errno.h>
+#include <linux/kconfig.h>
+
+struct pci_bus;
+struct resource;
+
+#if IS_BUILTIN(CONFIG_P2SB)
+
+int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem);
+
+#else /* CONFIG_P2SB */
+
+static inline int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem)
+{
+ return -ENODEV;
+}
+
+#endif /* CONFIG_P2SB is not set */
+
+#endif /* _PLATFORM_DATA_X86_P2SB_H */
diff --git a/include/linux/platform_data/x86/pmc_atom.h b/include/linux/platform_data/x86/pmc_atom.h
index 6807839c718b..3edfb6d4e67a 100644
--- a/include/linux/platform_data/x86/pmc_atom.h
+++ b/include/linux/platform_data/x86/pmc_atom.h
@@ -47,7 +47,7 @@
#define PMC_S0I2_TMR 0x88
#define PMC_S0I3_TMR 0x8C
#define PMC_S0_TMR 0x90
-/* Sleep state counter is in units of of 32us */
+/* Sleep state counter is in units of 32us */
#define PMC_TMR_SHIFT 5
/* Power status of power islands */
diff --git a/include/linux/platform_data/x86/simatic-ipc-base.h b/include/linux/platform_data/x86/simatic-ipc-base.h
index 62d2bc774067..39fefd48cf4d 100644
--- a/include/linux/platform_data/x86/simatic-ipc-base.h
+++ b/include/linux/platform_data/x86/simatic-ipc-base.h
@@ -24,6 +24,4 @@ struct simatic_ipc_platform {
u8 devmode;
};
-u32 simatic_ipc_get_membase0(unsigned int p2sb);
-
#endif /* __PLATFORM_DATA_X86_SIMATIC_IPC_BASE_H */
diff --git a/include/linux/surface_aggregator/controller.h b/include/linux/surface_aggregator/controller.h
index 74bfdffaf7b0..d11a1c6e3186 100644
--- a/include/linux/surface_aggregator/controller.h
+++ b/include/linux/surface_aggregator/controller.h
@@ -470,6 +470,67 @@ struct ssam_request_spec_md {
}
/**
+ * SSAM_DEFINE_SYNC_REQUEST_WR() - Define synchronous SAM request function with
+ * both argument and return value.
+ * @name: Name of the generated function.
+ * @atype: Type of the request's argument.
+ * @rtype: Type of the request's return value.
+ * @spec: Specification (&struct ssam_request_spec) defining the request.
+ *
+ * Defines a function executing the synchronous SAM request specified by @spec,
+ * with the request taking an argument of type @atype and having a return value
+ * of type @rtype. The generated function takes care of setting up the request
+ * and response structs, buffer allocation, as well as execution of the request
+ * itself, returning once the request has been fully completed. The required
+ * transport buffer will be allocated on the stack.
+ *
+ * The generated function is defined as ``static int name(struct
+ * ssam_controller *ctrl, const atype *arg, rtype *ret)``, returning the status
+ * of the request, which is zero on success and negative on failure. The
+ * ``ctrl`` parameter is the controller via which the request is sent. The
+ * request argument is specified via the ``arg`` pointer. The request's return
+ * value is written to the memory pointed to by the ``ret`` parameter.
+ *
+ * Refer to ssam_request_sync_onstack() for more details on the behavior of
+ * the generated function.
+ */
+#define SSAM_DEFINE_SYNC_REQUEST_WR(name, atype, rtype, spec...) \
+ static int name(struct ssam_controller *ctrl, const atype *arg, rtype *ret) \
+ { \
+ struct ssam_request_spec s = (struct ssam_request_spec)spec; \
+ struct ssam_request rqst; \
+ struct ssam_response rsp; \
+ int status; \
+ \
+ rqst.target_category = s.target_category; \
+ rqst.target_id = s.target_id; \
+ rqst.command_id = s.command_id; \
+ rqst.instance_id = s.instance_id; \
+ rqst.flags = s.flags | SSAM_REQUEST_HAS_RESPONSE; \
+ rqst.length = sizeof(atype); \
+ rqst.payload = (u8 *)arg; \
+ \
+ rsp.capacity = sizeof(rtype); \
+ rsp.length = 0; \
+ rsp.pointer = (u8 *)ret; \
+ \
+ status = ssam_request_sync_onstack(ctrl, &rqst, &rsp, sizeof(atype)); \
+ if (status) \
+ return status; \
+ \
+ if (rsp.length != sizeof(rtype)) { \
+ struct device *dev = ssam_controller_device(ctrl); \
+ dev_err(dev, \
+ "rqst: invalid response length, expected %zu, got %zu (tc: %#04x, cid: %#04x)", \
+ sizeof(rtype), rsp.length, rqst.target_category,\
+ rqst.command_id); \
+ return -EIO; \
+ } \
+ \
+ return 0; \
+ }
+
+/**
* SSAM_DEFINE_SYNC_REQUEST_MD_N() - Define synchronous multi-device SAM
* request function with neither argument nor return value.
* @name: Name of the generated function.
@@ -613,6 +674,70 @@ struct ssam_request_spec_md {
return 0; \
}
+/**
+ * SSAM_DEFINE_SYNC_REQUEST_MD_WR() - Define synchronous multi-device SAM
+ * request function with both argument and return value.
+ * @name: Name of the generated function.
+ * @atype: Type of the request's argument.
+ * @rtype: Type of the request's return value.
+ * @spec: Specification (&struct ssam_request_spec_md) defining the request.
+ *
+ * Defines a function executing the synchronous SAM request specified by @spec,
+ * with the request taking an argument of type @atype and having a return value
+ * of type @rtype. Device specifying parameters are not hard-coded, but instead
+ * must be provided to the function. The generated function takes care of
+ * setting up the request and response structs, buffer allocation, as well as
+ * execution of the request itself, returning once the request has been fully
+ * completed. The required transport buffer will be allocated on the stack.
+ *
+ * The generated function is defined as ``static int name(struct
+ * ssam_controller *ctrl, u8 tid, u8 iid, const atype *arg, rtype *ret)``,
+ * returning the status of the request, which is zero on success and negative
+ * on failure. The ``ctrl`` parameter is the controller via which the request
+ * is sent, ``tid`` the target ID for the request, and ``iid`` the instance ID.
+ * The request argument is specified via the ``arg`` pointer. The request's
+ * return value is written to the memory pointed to by the ``ret`` parameter.
+ *
+ * Refer to ssam_request_sync_onstack() for more details on the behavior of
+ * the generated function.
+ */
+#define SSAM_DEFINE_SYNC_REQUEST_MD_WR(name, atype, rtype, spec...) \
+ static int name(struct ssam_controller *ctrl, u8 tid, u8 iid, \
+ const atype *arg, rtype *ret) \
+ { \
+ struct ssam_request_spec_md s = (struct ssam_request_spec_md)spec; \
+ struct ssam_request rqst; \
+ struct ssam_response rsp; \
+ int status; \
+ \
+ rqst.target_category = s.target_category; \
+ rqst.target_id = tid; \
+ rqst.command_id = s.command_id; \
+ rqst.instance_id = iid; \
+ rqst.flags = s.flags | SSAM_REQUEST_HAS_RESPONSE; \
+ rqst.length = sizeof(atype); \
+ rqst.payload = (u8 *)arg; \
+ \
+ rsp.capacity = sizeof(rtype); \
+ rsp.length = 0; \
+ rsp.pointer = (u8 *)ret; \
+ \
+ status = ssam_request_sync_onstack(ctrl, &rqst, &rsp, sizeof(atype)); \
+ if (status) \
+ return status; \
+ \
+ if (rsp.length != sizeof(rtype)) { \
+ struct device *dev = ssam_controller_device(ctrl); \
+ dev_err(dev, \
+ "rqst: invalid response length, expected %zu, got %zu (tc: %#04x, cid: %#04x)", \
+ sizeof(rtype), rsp.length, rqst.target_category,\
+ rqst.command_id); \
+ return -EIO; \
+ } \
+ \
+ return 0; \
+ }
+
/* -- Event notifier/callbacks. --------------------------------------------- */
@@ -835,8 +960,28 @@ struct ssam_event_notifier {
int ssam_notifier_register(struct ssam_controller *ctrl,
struct ssam_event_notifier *n);
-int ssam_notifier_unregister(struct ssam_controller *ctrl,
- struct ssam_event_notifier *n);
+int __ssam_notifier_unregister(struct ssam_controller *ctrl,
+ struct ssam_event_notifier *n, bool disable);
+
+/**
+ * ssam_notifier_unregister() - Unregister an event notifier.
+ * @ctrl: The controller the notifier has been registered on.
+ * @n: The event notifier to unregister.
+ *
+ * Unregister an event notifier. Decrement the usage counter of the associated
+ * SAM event if the notifier is not marked as an observer. If the usage counter
+ * reaches zero, the event will be disabled.
+ *
+ * Return: Returns zero on success, %-ENOENT if the given notifier block has
+ * not been registered on the controller. If the given notifier block was the
+ * last one associated with its specific event, returns the status of the
+ * event-disable EC-command.
+ */
+static inline int ssam_notifier_unregister(struct ssam_controller *ctrl,
+ struct ssam_event_notifier *n)
+{
+ return __ssam_notifier_unregister(ctrl, n, true);
+}
int ssam_controller_event_enable(struct ssam_controller *ctrl,
struct ssam_event_registry reg,
diff --git a/include/linux/surface_aggregator/device.h b/include/linux/surface_aggregator/device.h
index cc257097eb05..46c45d1b6368 100644
--- a/include/linux/surface_aggregator/device.h
+++ b/include/linux/surface_aggregator/device.h
@@ -15,6 +15,7 @@
#include <linux/device.h>
#include <linux/mod_devicetable.h>
+#include <linux/property.h>
#include <linux/types.h>
#include <linux/surface_aggregator/controller.h>
@@ -148,17 +149,30 @@ struct ssam_device_uid {
#define SSAM_SDEV(cat, tid, iid, fun) \
SSAM_DEVICE(SSAM_DOMAIN_SERIALHUB, SSAM_SSH_TC_##cat, tid, iid, fun)
+/*
+ * enum ssam_device_flags - Flags for SSAM client devices.
+ * @SSAM_DEVICE_HOT_REMOVED_BIT:
+ * The device has been hot-removed. Further communication with it may time
+ * out and should be avoided.
+ */
+enum ssam_device_flags {
+ SSAM_DEVICE_HOT_REMOVED_BIT = 0,
+};
+
/**
* struct ssam_device - SSAM client device.
- * @dev: Driver model representation of the device.
- * @ctrl: SSAM controller managing this device.
- * @uid: UID identifying the device.
+ * @dev: Driver model representation of the device.
+ * @ctrl: SSAM controller managing this device.
+ * @uid: UID identifying the device.
+ * @flags: Device state flags, see &enum ssam_device_flags.
*/
struct ssam_device {
struct device dev;
struct ssam_controller *ctrl;
struct ssam_device_uid uid;
+
+ unsigned long flags;
};
/**
@@ -177,6 +191,8 @@ struct ssam_device_driver {
void (*remove)(struct ssam_device *sdev);
};
+#ifdef CONFIG_SURFACE_AGGREGATOR_BUS
+
extern struct bus_type ssam_bus_type;
extern const struct device_type ssam_device_type;
@@ -193,6 +209,15 @@ static inline bool is_ssam_device(struct device *d)
return d->type == &ssam_device_type;
}
+#else /* CONFIG_SURFACE_AGGREGATOR_BUS */
+
+static inline bool is_ssam_device(struct device *d)
+{
+ return false;
+}
+
+#endif /* CONFIG_SURFACE_AGGREGATOR_BUS */
+
/**
* to_ssam_device() - Casts the given device to a SSAM client device.
* @d: The device to cast.
@@ -241,6 +266,35 @@ int ssam_device_add(struct ssam_device *sdev);
void ssam_device_remove(struct ssam_device *sdev);
/**
+ * ssam_device_mark_hot_removed() - Mark the given device as hot-removed.
+ * @sdev: The device to mark as hot-removed.
+ *
+ * Mark the device as having been hot-removed. This signals drivers using the
+ * device that communication with the device should be avoided and may lead to
+ * timeouts.
+ */
+static inline void ssam_device_mark_hot_removed(struct ssam_device *sdev)
+{
+ dev_dbg(&sdev->dev, "marking device as hot-removed\n");
+ set_bit(SSAM_DEVICE_HOT_REMOVED_BIT, &sdev->flags);
+}
+
+/**
+ * ssam_device_is_hot_removed() - Check if the given device has been
+ * hot-removed.
+ * @sdev: The device to check.
+ *
+ * Checks if the given device has been marked as hot-removed. See
+ * ssam_device_mark_hot_removed() for more details.
+ *
+ * Return: Returns ``true`` if the device has been marked as hot-removed.
+ */
+static inline bool ssam_device_is_hot_removed(struct ssam_device *sdev)
+{
+ return test_bit(SSAM_DEVICE_HOT_REMOVED_BIT, &sdev->flags);
+}
+
+/**
* ssam_device_get() - Increment reference count of SSAM client device.
* @sdev: The device to increment the reference count of.
*
@@ -322,11 +376,62 @@ void ssam_device_driver_unregister(struct ssam_device_driver *d);
/* -- Helpers for controller and hub devices. ------------------------------- */
#ifdef CONFIG_SURFACE_AGGREGATOR_BUS
+
+int __ssam_register_clients(struct device *parent, struct ssam_controller *ctrl,
+ struct fwnode_handle *node);
void ssam_remove_clients(struct device *dev);
+
#else /* CONFIG_SURFACE_AGGREGATOR_BUS */
+
+static inline int __ssam_register_clients(struct device *parent, struct ssam_controller *ctrl,
+ struct fwnode_handle *node)
+{
+ return 0;
+}
+
static inline void ssam_remove_clients(struct device *dev) {}
+
#endif /* CONFIG_SURFACE_AGGREGATOR_BUS */
+/**
+ * ssam_register_clients() - Register all client devices defined under the
+ * given parent device.
+ * @dev: The parent device under which clients should be registered.
+ * @ctrl: The controller with which client should be registered.
+ *
+ * Register all clients that have via firmware nodes been defined as children
+ * of the given (parent) device. The respective child firmware nodes will be
+ * associated with the correspondingly created child devices.
+ *
+ * The given controller will be used to instantiate the new devices. See
+ * ssam_device_add() for details.
+ *
+ * Return: Returns zero on success, nonzero on failure.
+ */
+static inline int ssam_register_clients(struct device *dev, struct ssam_controller *ctrl)
+{
+ return __ssam_register_clients(dev, ctrl, dev_fwnode(dev));
+}
+
+/**
+ * ssam_device_register_clients() - Register all client devices defined under
+ * the given SSAM parent device.
+ * @sdev: The parent device under which clients should be registered.
+ *
+ * Register all clients that have via firmware nodes been defined as children
+ * of the given (parent) device. The respective child firmware nodes will be
+ * associated with the correspondingly created child devices.
+ *
+ * The controller used by the parent device will be used to instantiate the new
+ * devices. See ssam_device_add() for details.
+ *
+ * Return: Returns zero on success, nonzero on failure.
+ */
+static inline int ssam_device_register_clients(struct ssam_device *sdev)
+{
+ return ssam_register_clients(&sdev->dev, sdev->ctrl);
+}
+
/* -- Helpers for client-device requests. ----------------------------------- */
@@ -430,4 +535,106 @@ static inline void ssam_remove_clients(struct device *dev) {}
sdev->uid.instance, ret); \
}
+/**
+ * SSAM_DEFINE_SYNC_REQUEST_CL_WR() - Define synchronous client-device SAM
+ * request function with argument and return value.
+ * @name: Name of the generated function.
+ * @atype: Type of the request's argument.
+ * @rtype: Type of the request's return value.
+ * @spec: Specification (&struct ssam_request_spec_md) defining the request.
+ *
+ * Defines a function executing the synchronous SAM request specified by @spec,
+ * with the request taking an argument of type @atype and having a return value
+ * of type @rtype. Device specifying parameters are not hard-coded, but instead
+ * are provided via the client device, specifically its UID, supplied when
+ * calling this function. The generated function takes care of setting up the
+ * request struct, buffer allocation, as well as execution of the request
+ * itself, returning once the request has been fully completed. The required
+ * transport buffer will be allocated on the stack.
+ *
+ * The generated function is defined as ``static int name(struct ssam_device
+ * *sdev, const atype *arg, rtype *ret)``, returning the status of the request,
+ * which is zero on success and negative on failure. The ``sdev`` parameter
+ * specifies both the target device of the request and by association the
+ * controller via which the request is sent. The request's argument is
+ * specified via the ``arg`` pointer. The request's return value is written to
+ * the memory pointed to by the ``ret`` parameter.
+ *
+ * Refer to ssam_request_sync_onstack() for more details on the behavior of
+ * the generated function.
+ */
+#define SSAM_DEFINE_SYNC_REQUEST_CL_WR(name, atype, rtype, spec...) \
+ SSAM_DEFINE_SYNC_REQUEST_MD_WR(__raw_##name, atype, rtype, spec) \
+ static int name(struct ssam_device *sdev, const atype *arg, rtype *ret) \
+ { \
+ return __raw_##name(sdev->ctrl, sdev->uid.target, \
+ sdev->uid.instance, arg, ret); \
+ }
+
+
+/* -- Helpers for client-device notifiers. ---------------------------------- */
+
+/**
+ * ssam_device_notifier_register() - Register an event notifier for the
+ * specified client device.
+ * @sdev: The device the notifier should be registered on.
+ * @n: The event notifier to register.
+ *
+ * Register an event notifier. Increment the usage counter of the associated
+ * SAM event if the notifier is not marked as an observer. If the event is not
+ * marked as an observer and is currently not enabled, it will be enabled
+ * during this call. If the notifier is marked as an observer, no attempt will
+ * be made at enabling any event and no reference count will be modified.
+ *
+ * Notifiers marked as observers do not need to be associated with one specific
+ * event, i.e. as long as no event matching is performed, only the event target
+ * category needs to be set.
+ *
+ * Return: Returns zero on success, %-ENOSPC if there have already been
+ * %INT_MAX notifiers for the event ID/type associated with the notifier block
+ * registered, %-ENOMEM if the corresponding event entry could not be
+ * allocated, %-ENODEV if the device is marked as hot-removed. If this is the
+ * first time that a notifier block is registered for the specific associated
+ * event, returns the status of the event-enable EC-command.
+ */
+static inline int ssam_device_notifier_register(struct ssam_device *sdev,
+ struct ssam_event_notifier *n)
+{
+ /*
+ * Note that this check does not provide any guarantees whatsoever as
+ * hot-removal could happen at any point and we can't protect against
+ * it. Nevertheless, if we can detect hot-removal, bail early to avoid
+ * communication timeouts.
+ */
+ if (ssam_device_is_hot_removed(sdev))
+ return -ENODEV;
+
+ return ssam_notifier_register(sdev->ctrl, n);
+}
+
+/**
+ * ssam_device_notifier_unregister() - Unregister an event notifier for the
+ * specified client device.
+ * @sdev: The device the notifier has been registered on.
+ * @n: The event notifier to unregister.
+ *
+ * Unregister an event notifier. Decrement the usage counter of the associated
+ * SAM event if the notifier is not marked as an observer. If the usage counter
+ * reaches zero, the event will be disabled.
+ *
+ * In case the device has been marked as hot-removed, the event will not be
+ * disabled on the EC, as in those cases any attempt at doing so may time out.
+ *
+ * Return: Returns zero on success, %-ENOENT if the given notifier block has
+ * not been registered on the controller. If the given notifier block was the
+ * last one associated with its specific event, returns the status of the
+ * event-disable EC-command.
+ */
+static inline int ssam_device_notifier_unregister(struct ssam_device *sdev,
+ struct ssam_event_notifier *n)
+{
+ return __ssam_notifier_unregister(sdev->ctrl, n,
+ !ssam_device_is_hot_removed(sdev));
+}
+
#endif /* _LINUX_SURFACE_AGGREGATOR_DEVICE_H */
diff --git a/include/linux/surface_aggregator/serial_hub.h b/include/linux/surface_aggregator/serial_hub.h
index c3de43edcffa..45501b6e54e8 100644
--- a/include/linux/surface_aggregator/serial_hub.h
+++ b/include/linux/surface_aggregator/serial_hub.h
@@ -201,7 +201,7 @@ static inline u16 ssh_crc(const u8 *buf, size_t len)
* exception of zero, which is not an event ID. Thus, this is also the
* absolute maximum number of event handlers that can be registered.
*/
-#define SSH_NUM_EVENTS 34
+#define SSH_NUM_EVENTS 38
/*
* SSH_NUM_TARGETS - The number of communication targets used in the protocol.
@@ -292,40 +292,45 @@ struct ssam_span {
* Windows driver.
*/
enum ssam_ssh_tc {
- /* Category 0x00 is invalid for EC use. */
- SSAM_SSH_TC_SAM = 0x01, /* Generic system functionality, real-time clock. */
- SSAM_SSH_TC_BAT = 0x02, /* Battery/power subsystem. */
- SSAM_SSH_TC_TMP = 0x03, /* Thermal subsystem. */
- SSAM_SSH_TC_PMC = 0x04,
- SSAM_SSH_TC_FAN = 0x05,
- SSAM_SSH_TC_PoM = 0x06,
- SSAM_SSH_TC_DBG = 0x07,
- SSAM_SSH_TC_KBD = 0x08, /* Legacy keyboard (Laptop 1/2). */
- SSAM_SSH_TC_FWU = 0x09,
- SSAM_SSH_TC_UNI = 0x0a,
- SSAM_SSH_TC_LPC = 0x0b,
- SSAM_SSH_TC_TCL = 0x0c,
- SSAM_SSH_TC_SFL = 0x0d,
- SSAM_SSH_TC_KIP = 0x0e,
- SSAM_SSH_TC_EXT = 0x0f,
- SSAM_SSH_TC_BLD = 0x10,
- SSAM_SSH_TC_BAS = 0x11, /* Detachment system (Surface Book 2/3). */
- SSAM_SSH_TC_SEN = 0x12,
- SSAM_SSH_TC_SRQ = 0x13,
- SSAM_SSH_TC_MCU = 0x14,
- SSAM_SSH_TC_HID = 0x15, /* Generic HID input subsystem. */
- SSAM_SSH_TC_TCH = 0x16,
- SSAM_SSH_TC_BKL = 0x17,
- SSAM_SSH_TC_TAM = 0x18,
- SSAM_SSH_TC_ACC = 0x19,
- SSAM_SSH_TC_UFI = 0x1a,
- SSAM_SSH_TC_USC = 0x1b,
- SSAM_SSH_TC_PEN = 0x1c,
- SSAM_SSH_TC_VID = 0x1d,
- SSAM_SSH_TC_AUD = 0x1e,
- SSAM_SSH_TC_SMC = 0x1f,
- SSAM_SSH_TC_KPD = 0x20,
- SSAM_SSH_TC_REG = 0x21, /* Extended event registry. */
+ /* Category 0x00 is invalid for EC use. */
+ SSAM_SSH_TC_SAM = 0x01, /* Generic system functionality, real-time clock. */
+ SSAM_SSH_TC_BAT = 0x02, /* Battery/power subsystem. */
+ SSAM_SSH_TC_TMP = 0x03, /* Thermal subsystem. */
+ SSAM_SSH_TC_PMC = 0x04,
+ SSAM_SSH_TC_FAN = 0x05,
+ SSAM_SSH_TC_PoM = 0x06,
+ SSAM_SSH_TC_DBG = 0x07,
+ SSAM_SSH_TC_KBD = 0x08, /* Legacy keyboard (Laptop 1/2). */
+ SSAM_SSH_TC_FWU = 0x09,
+ SSAM_SSH_TC_UNI = 0x0a,
+ SSAM_SSH_TC_LPC = 0x0b,
+ SSAM_SSH_TC_TCL = 0x0c,
+ SSAM_SSH_TC_SFL = 0x0d,
+ SSAM_SSH_TC_KIP = 0x0e, /* Manages detachable peripherals (Pro X/8 keyboard cover) */
+ SSAM_SSH_TC_EXT = 0x0f,
+ SSAM_SSH_TC_BLD = 0x10,
+ SSAM_SSH_TC_BAS = 0x11, /* Detachment system (Surface Book 2/3). */
+ SSAM_SSH_TC_SEN = 0x12,
+ SSAM_SSH_TC_SRQ = 0x13,
+ SSAM_SSH_TC_MCU = 0x14,
+ SSAM_SSH_TC_HID = 0x15, /* Generic HID input subsystem. */
+ SSAM_SSH_TC_TCH = 0x16,
+ SSAM_SSH_TC_BKL = 0x17,
+ SSAM_SSH_TC_TAM = 0x18,
+ SSAM_SSH_TC_ACC0 = 0x19,
+ SSAM_SSH_TC_UFI = 0x1a,
+ SSAM_SSH_TC_USC = 0x1b,
+ SSAM_SSH_TC_PEN = 0x1c,
+ SSAM_SSH_TC_VID = 0x1d,
+ SSAM_SSH_TC_AUD = 0x1e,
+ SSAM_SSH_TC_SMC = 0x1f,
+ SSAM_SSH_TC_KPD = 0x20,
+ SSAM_SSH_TC_REG = 0x21, /* Extended event registry. */
+ SSAM_SSH_TC_SPT = 0x22,
+ SSAM_SSH_TC_SYS = 0x23,
+ SSAM_SSH_TC_ACC1 = 0x24,
+ SSAM_SSH_TC_SHB = 0x25,
+ SSAM_SSH_TC_POS = 0x26, /* For obtaining Laptop Studio screen position. */
};
diff --git a/tools/power/x86/intel-speed-select/hfi-events.c b/tools/power/x86/intel-speed-select/hfi-events.c
index 761375062505..f0ed69721308 100644
--- a/tools/power/x86/intel-speed-select/hfi-events.c
+++ b/tools/power/x86/intel-speed-select/hfi-events.c
@@ -144,7 +144,7 @@ static int family_handler(struct nl_msg *msg, void *arg)
continue;
res->id = nla_get_u32(tb2[CTRL_ATTR_MCAST_GRP_ID]);
break;
- };
+ }
return 0;
}
diff --git a/tools/power/x86/intel-speed-select/isst-daemon.c b/tools/power/x86/intel-speed-select/isst-daemon.c
index dd372924bc82..d0400c6684ba 100644
--- a/tools/power/x86/intel-speed-select/isst-daemon.c
+++ b/tools/power/x86/intel-speed-select/isst-daemon.c
@@ -41,7 +41,7 @@ void process_level_change(int cpu)
time_t tm;
int ret;
- if (pkg_id >= MAX_PACKAGE_COUNT || die_id > MAX_DIE_PER_PACKAGE) {
+ if (pkg_id >= MAX_PACKAGE_COUNT || die_id >= MAX_DIE_PER_PACKAGE) {
debug_printf("Invalid package/die info for cpu:%d\n", cpu);
return;
}