summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-02-08ASoC: ops: Reject out of bounds values in snd_soc_put_volsw()Mark Brown
commit 817f7c9335ec01e0f5e8caffc4f1dcd5e458a4c0 upstream. We don't currently validate that the values being set are within the range we advertised to userspace as being valid, do so and reject any values that are out of range. Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220124153253.3548853-2-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08audit: improve audit queue handling when "audit=1" on cmdlinePaul Moore
commit f26d04331360d42dbd6b58448bd98e4edbfbe1c5 upstream. When an admin enables audit at early boot via the "audit=1" kernel command line the audit queue behavior is slightly different; the audit subsystem goes to greater lengths to avoid dropping records, which unfortunately can result in problems when the audit daemon is forcibly stopped for an extended period of time. This patch makes a number of changes designed to improve the audit queuing behavior so that leaving the audit daemon in a stopped state for an extended period does not cause a significant impact to the system. - kauditd_send_queue() is now limited to looping through the passed queue only once per call. This not only prevents the function from looping indefinitely when records are returned to the current queue, it also allows any recovery handling in kauditd_thread() to take place when kauditd_send_queue() returns. - Transient netlink send errors seen as -EAGAIN now cause the record to be returned to the retry queue instead of going to the hold queue. The intention of the hold queue is to store, perhaps for an extended period of time, the events which led up to the audit daemon going offline. The retry queue remains a temporary queue intended to protect against transient issues between the kernel and the audit daemon. - The retry queue is now limited by the audit_backlog_limit setting, the same as the other queues. This allows admins to bound the size of all of the audit queues on the system. - kauditd_rehold_skb() now returns records to the end of the hold queue to ensure ordering is preserved in the face of recent changes to kauditd_send_queue(). Cc: stable@vger.kernel.org Fixes: 5b52330bbfe63 ("audit: fix auditd/kernel connection state tracking") Fixes: f4b3ee3c85551 ("audit: improve robustness of the audit queue handling") Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com> Tested-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08af_packet: fix data-race in packet_setsockopt / packet_setsockoptEric Dumazet
commit e42e70ad6ae2ae511a6143d2e8da929366e58bd9 upstream. When packet_setsockopt( PACKET_FANOUT_DATA ) reads po->fanout, no lock is held, meaning that another thread can change po->fanout. Given that po->fanout can only be set once during the socket lifetime (it is only cleared from fanout_release()), we can use READ_ONCE()/WRITE_ONCE() to document the race. BUG: KCSAN: data-race in packet_setsockopt / packet_setsockopt write to 0xffff88813ae8e300 of 8 bytes by task 14653 on cpu 0: fanout_add net/packet/af_packet.c:1791 [inline] packet_setsockopt+0x22fe/0x24a0 net/packet/af_packet.c:3931 __sys_setsockopt+0x209/0x2a0 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0x62/0x70 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88813ae8e300 of 8 bytes by task 14654 on cpu 1: packet_setsockopt+0x691/0x24a0 net/packet/af_packet.c:3935 __sys_setsockopt+0x209/0x2a0 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0x62/0x70 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000000000000000 -> 0xffff888106f8c000 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 14654 Comm: syz-executor.3 Not tainted 5.16.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 47dceb8ecdc1 ("packet: add classic BPF fanout mode") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220201022358.330621-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08rtnetlink: make sure to refresh master_dev/m_ops in __rtnl_newlink()Eric Dumazet
commit c6f6f2444bdbe0079e41914a35081530d0409963 upstream. While looking at one unrelated syzbot bug, I found the replay logic in __rtnl_newlink() to potentially trigger use-after-free. It is better to clear master_dev and m_ops inside the loop, in case we have to replay it. Fixes: ba7d49b1f0f8 ("rtnetlink: provide api for getting and setting slave info") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20220201012106.216495-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08net: amd-xgbe: Fix skb data length underflowShyam Sundar S K
commit 5aac9108a180fc06e28d4e7fb00247ce603b72ee upstream. There will be BUG_ON() triggered in include/linux/skbuff.h leading to intermittent kernel panic, when the skb length underflow is detected. Fix this by dropping the packet if such length underflows are seen because of inconsistencies in the hardware descriptors. Fixes: 622c36f143fc ("amd-xgbe: Fix jumbo MTU processing on newer hardware") Suggested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20220127092003.2812745-1-Shyam-sundar.S-k@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08net: amd-xgbe: ensure to reset the tx_timer_active flagRaju Rangoju
commit 7674b7b559b683478c3832527c59bceb169e701d upstream. Ensure to reset the tx_timer_active flag in xgbe_stop(), otherwise a port restart may result in tx timeout due to uncleared flag. Fixes: c635eaacbf77 ("amd-xgbe: Remove Tx coalescing") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20220127060222.453371-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08ipheth: fix EOVERFLOW in ipheth_rcvbulk_callbackGeorgi Valkov
commit 63e4b45c82ed1bde979da7052229a4229ce9cabf upstream. When rx_buf is allocated we need to account for IPHETH_IP_ALIGN, which reduces the usable size by 2 bytes. Otherwise we have 1512 bytes usable instead of 1514, and if we receive more than 1512 bytes, ipheth_rcvbulk_callback is called with status -EOVERFLOW, after which the driver malfunctiones and all communication stops. Resolves ipheth 2-1:4.2: ipheth_rcvbulk_callback: urb status: -75 Fixes: f33d9e2b48a3 ("usbnet: ipheth: fix connectivity with iOS 14") Signed-off-by: Georgi Valkov <gvalkov@abv.bg> Tested-by: Jan Kiszka <jan.kiszka@siemens.com> Link: https://lore.kernel.org/all/B60B8A4B-92A0-49B3-805D-809A2433B46C@abv.bg/ Link: https://lore.kernel.org/all/24851bd2769434a5fc24730dce8e8a984c5a4505.1643699778.git.jan.kiszka@siemens.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08netfilter: nat: limit port clash resolution attemptsFlorian Westphal
commit a504b703bb1da526a01593da0e4be2af9d9f5fa8 upstream. In case almost or all available ports are taken, clash resolution can take a very long time, resulting in soft lockup. This can happen when many to-be-natted hosts connect to same destination:port (e.g. a proxy) and all connections pass the same SNAT. Pick a random offset in the acceptable range, then try ever smaller number of adjacent port numbers, until either the limit is reached or a useable port was found. This results in at most 248 attempts (128 + 64 + 32 + 16 + 8, i.e. 4 restarts with new search offset) instead of 64000+, Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Vimal Agrawal <vimal.agrawal@sophos.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08netfilter: nat: remove l4 protocol port roversFlorian Westphal
commit 6ed5943f8735e2b778d92ea4d9805c0a1d89bc2b upstream. This is a leftover from days where single-cpu systems were common: Store last port used to resolve a clash to use it as a starting point when the next conflict needs to be resolved. When we have parallel attempt to connect to same address:port pair, its likely that both cores end up computing the same "available" port, as both use same starting port, and newly used ports won't become visible to other cores until the conntrack gets confirmed later. One of the cores then has to drop the packet at insertion time because the chosen new tuple turns out to be in use after all. Lets simplify this: remove port rover and use a pseudo-random starting point. Note that this doesn't make netfilter default to 'fully random' mode; the 'rover' was only used if NAT could not reuse source port as-is. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08bpf: fix truncated jump targets on heavy expansionsDaniel Borkmann
commit 050fad7c4534c13c8eb1d9c2ba66012e014773cb upstream. Recently during testing, I ran into the following panic: [ 207.892422] Internal error: Accessing user space memory outside uaccess.h routines: 96000004 [#1] SMP [ 207.901637] Modules linked in: binfmt_misc [...] [ 207.966530] CPU: 45 PID: 2256 Comm: test_verifier Tainted: G W 4.17.0-rc3+ #7 [ 207.974956] Hardware name: FOXCONN R2-1221R-A4/C2U4N_MB, BIOS G31FB18A 03/31/2017 [ 207.982428] pstate: 60400005 (nZCv daif +PAN -UAO) [ 207.987214] pc : bpf_skb_load_helper_8_no_cache+0x34/0xc0 [ 207.992603] lr : 0xffff000000bdb754 [ 207.996080] sp : ffff000013703ca0 [ 207.999384] x29: ffff000013703ca0 x28: 0000000000000001 [ 208.004688] x27: 0000000000000001 x26: 0000000000000000 [ 208.009992] x25: ffff000013703ce0 x24: ffff800fb4afcb00 [ 208.015295] x23: ffff00007d2f5038 x22: ffff00007d2f5000 [ 208.020599] x21: fffffffffeff2a6f x20: 000000000000000a [ 208.025903] x19: ffff000009578000 x18: 0000000000000a03 [ 208.031206] x17: 0000000000000000 x16: 0000000000000000 [ 208.036510] x15: 0000ffff9de83000 x14: 0000000000000000 [ 208.041813] x13: 0000000000000000 x12: 0000000000000000 [ 208.047116] x11: 0000000000000001 x10: ffff0000089e7f18 [ 208.052419] x9 : fffffffffeff2a6f x8 : 0000000000000000 [ 208.057723] x7 : 000000000000000a x6 : 00280c6160000000 [ 208.063026] x5 : 0000000000000018 x4 : 0000000000007db6 [ 208.068329] x3 : 000000000008647a x2 : 19868179b1484500 [ 208.073632] x1 : 0000000000000000 x0 : ffff000009578c08 [ 208.078938] Process test_verifier (pid: 2256, stack limit = 0x0000000049ca7974) [ 208.086235] Call trace: [ 208.088672] bpf_skb_load_helper_8_no_cache+0x34/0xc0 [ 208.093713] 0xffff000000bdb754 [ 208.096845] bpf_test_run+0x78/0xf8 [ 208.100324] bpf_prog_test_run_skb+0x148/0x230 [ 208.104758] sys_bpf+0x314/0x1198 [ 208.108064] el0_svc_naked+0x30/0x34 [ 208.111632] Code: 91302260 f9400001 f9001fa1 d2800001 (29500680) [ 208.117717] ---[ end trace 263cb8a59b5bf29f ]--- The program itself which caused this had a long jump over the whole instruction sequence where all of the inner instructions required heavy expansions into multiple BPF instructions. Additionally, I also had BPF hardening enabled which requires once more rewrites of all constant values in order to blind them. Each time we rewrite insns, bpf_adj_branches() would need to potentially adjust branch targets which cross the patchlet boundary to accommodate for the additional delta. Eventually that lead to the case where the target offset could not fit into insn->off's upper 0x7fff limit anymore where then offset wraps around becoming negative (in s16 universe), or vice versa depending on the jump direction. Therefore it becomes necessary to detect and reject any such occasions in a generic way for native eBPF and cBPF to eBPF migrations. For the latter we can simply check bounds in the bpf_convert_filter()'s BPF_EMIT_JMP helper macro and bail out once we surpass limits. The bpf_patch_insn_single() for native eBPF (and cBPF to eBPF in case of subsequent hardening) is a bit more complex in that we need to detect such truncations before hitting the bpf_prog_realloc(). Thus the latter is split into an extra pass to probe problematic offsets on the original program in order to fail early. With that in place and carefully tested I no longer hit the panic and the rewrites are rejected properly. The above example panic I've seen on bpf-next, though the issue itself is generic in that a guard against this issue in bpf seems more appropriate in this case. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> [ab: Dropped BPF_PSEUDO_CALL hardening, introoduced in 4.16] Signed-off-by: Alessio Balsini <balsini@android.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08ipv4: tcp: send zero IPID in SYNACK messagesEric Dumazet
[ Upstream commit 970a5a3ea86da637471d3cd04d513a0755aba4bf ] In commit 431280eebed9 ("ipv4: tcp: send zero IPID for RST and ACK sent in SYN-RECV and TIME-WAIT state") we took care of some ctl packets sent by TCP. It turns out we need to use a similar strategy for SYNACK packets. By default, they carry IP_DF and IPID==0, but there are ways to ask them to use the hashed IP ident generator and thus be used to build off-path attacks. (Ref: Off-Path TCP Exploits of the Mixed IPID Assignment) One of this way is to force (before listener is started) echo 1 >/proc/sys/net/ipv4/ip_no_pmtu_disc Another way is using forged ICMP ICMP_FRAG_NEEDED with a very small MTU (like 68) to force a false return from ip_dont_fragment() In this patch, ip_build_and_send_pkt() uses the following heuristics. 1) Most SYNACK packets are smaller than IPV4_MIN_MTU and therefore can use IP_DF regardless of the listener or route pmtu setting. 2) In case the SYNACK packet is bigger than IPV4_MIN_MTU, we use prandom_u32() generator instead of the IPv4 hashed ident one. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Ray Che <xijiache@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Cc: Geoff Alexander <alexandg@cs.unm.edu> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-08ipv4: raw: lock the socket in raw_bind()Eric Dumazet
[ Upstream commit 153a0d187e767c68733b8e9f46218eb1f41ab902 ] For some reason, raw_bind() forgot to lock the socket. BUG: KCSAN: data-race in __ip4_datagram_connect / raw_bind write to 0xffff8881170d4308 of 4 bytes by task 5466 on cpu 0: raw_bind+0x1b0/0x250 net/ipv4/raw.c:739 inet_bind+0x56/0xa0 net/ipv4/af_inet.c:443 __sys_bind+0x14b/0x1b0 net/socket.c:1697 __do_sys_bind net/socket.c:1708 [inline] __se_sys_bind net/socket.c:1706 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1706 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff8881170d4308 of 4 bytes by task 5468 on cpu 1: __ip4_datagram_connect+0xb7/0x7b0 net/ipv4/datagram.c:39 ip4_datagram_connect+0x2a/0x40 net/ipv4/datagram.c:89 inet_dgram_connect+0x107/0x190 net/ipv4/af_inet.c:576 __sys_connect_file net/socket.c:1900 [inline] __sys_connect+0x197/0x1b0 net/socket.c:1917 __do_sys_connect net/socket.c:1927 [inline] __se_sys_connect net/socket.c:1924 [inline] __x64_sys_connect+0x3d/0x50 net/socket.c:1924 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0x0003007f Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 5468 Comm: syz-executor.5 Not tainted 5.17.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-08yam: fix a memory leak in yam_siocdevprivate()Hangyu Hua
[ Upstream commit 29eb31542787e1019208a2e1047bb7c76c069536 ] ym needs to be free when ym->cmd != SIOCYAMSMCS. Fixes: 0781168e23a2 ("yam: fix a missing-check bug") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-08ibmvnic: don't spin in taskletSukadev Bhattiprolu
[ Upstream commit 48079e7fdd0269d66b1d7d66ae88bd03162464ad ] ibmvnic_tasklet() continuously spins waiting for responses to all capability requests. It does this to avoid encountering an error during initialization of the vnic. However if there is a bug in the VIOS and we do not receive a response to one or more queries the tasklet ends up spinning continuously leading to hard lock ups. If we fail to receive a message from the VIOS it is reasonable to timeout the login attempt rather than spin indefinitely in the tasklet. Fixes: 249168ad07cd ("ibmvnic: Make CRQ interrupt tasklet wait for all capabilities crqs") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-08drm/msm/dsi: invalid parameter check in msm_dsi_phy_enableJosé Expósito
commit 5e761a2287234bc402ba7ef07129f5103bcd775c upstream. The function performs a check on the "phy" input parameter, however, it is used before the check. Initialize the "dev" variable after the sanity check to avoid a possible NULL pointer dereference. Fixes: 5c8290284402b ("drm/msm/dsi: Split PHY drivers to separate files") Addresses-Coverity-ID: 1493860 ("Null pointer dereference") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220116181844.7400-1-jose.exposito89@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08drm/msm: Fix wrong size calculationXianting Tian
commit 0a727b459ee39bd4c5ced19d6024258ac87b6b2e upstream. For example, memory-region in .dts as below, reg = <0x0 0x50000000 0x0 0x20000000> We can get below values, struct resource r; r.start = 0x50000000; r.end = 0x6fffffff; So the size should be: size = r.end - r.start + 1 = 0x20000000 Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com> Fixes: 072f1f9168ed ("drm/msm: add support for "stolen" mem") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220112123334.749776-1-xianting.tian@linux.alibaba.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-08net-procfs: show net devices bound packet typesJianguo Wu
commit 1d10f8a1f40b965d449e8f2d5ed7b96a7c138b77 upstream. After commit:7866a621043f ("dev: add per net_device packet type chains"), we can not get packet types that are bound to a specified net device by /proc/net/ptype, this patch fix the regression. Run "tcpdump -i ens192 udp -nns0" Before and after apply this patch: Before: [root@localhost ~]# cat /proc/net/ptype Type Device Function 0800 ip_rcv 0806 arp_rcv 86dd ipv6_rcv After: [root@localhost ~]# cat /proc/net/ptype Type Device Function ALL ens192 tpacket_rcv 0800 ip_rcv 0806 arp_rcv 86dd ipv6_rcv v1 -> v2: - fix the regression rather than adding new /proc API as suggested by Stephen Hemminger. Fixes: 7866a621043f ("dev: add per net_device packet type chains") Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08NFSv4: nfs_atomic_open() can race when looking up a non-regular fileTrond Myklebust
commit 1751fc1db36f6f411709e143d5393f92d12137a9 upstream. If the file type changes back to being a regular file on the server between the failed OPEN and our LOOKUP, then we need to re-run the OPEN. Fixes: 0dd2b474d0b6 ("nfs: implement i_op->atomic_open()") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08NFSv4: Handle case where the lookup of a directory failsTrond Myklebust
commit ac795161c93699d600db16c1a8cc23a65a1eceaf upstream. If the application sets the O_DIRECTORY flag, and tries to open a regular file, nfs_atomic_open() will punt to doing a regular lookup. If the server then returns a regular file, we will happily return a file descriptor with uninitialised open state. The fix is to return the expected ENOTDIR error in these cases. Reported-by: Lyu Tao <tao.lyu@epfl.ch> Fixes: 0dd2b474d0b6 ("nfs: implement i_op->atomic_open()") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08hwmon: (lm90) Reduce maximum conversion rate for G781Guenter Roeck
[ Upstream commit a66c5ed539277b9f2363bbace0dba88b85b36c26 ] According to its datasheet, G781 supports a maximum conversion rate value of 8 (62.5 ms). However, chips labeled G781 and G780 were found to only support a maximum conversion rate value of 7 (125 ms). On the other side, chips labeled G781-1 and G784 were found to support a conversion rate value of 8. There is no known means to distinguish G780 from G781 or G784; all chips report the same manufacturer ID and chip revision. Setting the conversion rate register value to 8 on chips not supporting it causes unexpected behavior since the real conversion rate is set to 0 (16 seconds) if a value of 8 is written into the conversion rate register. Limit the conversion rate register value to 7 for all G78x chips to avoid the problem. Fixes: ae544f64cc7b ("hwmon: (lm90) Add support for GMT G781") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-08ipv4: avoid using shared IP generator for connected socketsEric Dumazet
commit 23f57406b82de51809d5812afd96f210f8b627f3 upstream. ip_select_ident_segs() has been very conservative about using the connected socket private generator only for packets with IP_DF set, claiming it was needed for some VJ compression implementations. As mentioned in this referenced document, this can be abused. (Ref: Off-Path TCP Exploits of the Mixed IPID Assignment) Before switching to pure random IPID generation and possibly hurt some workloads, lets use the private inet socket generator. Not only this will remove one vulnerability, this will also improve performance of TCP flows using pmtudisc==IP_PMTUDISC_DONT Fixes: 73f156a6e8c1 ("inetpeer: get rid of ip_id_count") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reported-by: Ray Che <xijiache@gmail.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08ping: fix the sk_bound_dev_if match in ping_lookupXin Long
commit 2afc3b5a31f9edf3ef0f374f5d70610c79c93a42 upstream. When 'ping' changes to use PING socket instead of RAW socket by: # sysctl -w net.ipv4.ping_group_range="0 100" the selftests 'router_broadcast.sh' will fail, as such command # ip vrf exec vrf-h1 ping -I veth0 198.51.100.255 -b can't receive the response skb by the PING socket. It's caused by mismatch of sk_bound_dev_if and dif in ping_rcv() when looking up the PING socket, as dif is vrf-h1 if dif's master was set to vrf-h1. This patch is to fix this regression by also checking the sk_bound_dev_if against sdif so that the packets can stil be received even if the socket is not bound to the vrf device but to the real iif. Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-08net: fix information leakage in /proc/net/ptypeCongyu Liu
commit 47934e06b65637c88a762d9c98329ae6e3238888 upstream. In one net namespace, after creating a packet socket without binding it to a device, users in other net namespaces can observe the new `packet_type` added by this packet socket by reading `/proc/net/ptype` file. This is minor information leakage as packet socket is namespace aware. Add a net pointer in `packet_type` to keep the net namespace of of corresponding packet socket. In `ptype_seq_show`, this net pointer must be checked when it is not NULL. Fixes: 2feb27dbe00c ("[NETNS]: Minor information leak via /proc/net/ptype file.") Signed-off-by: Congyu Liu <liu3101@purdue.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-08ipv6_tunnel: Rate limit warning messagesIdo Schimmel
commit 6cee105e7f2ced596373951d9ea08dacc3883c68 upstream. The warning messages can be invoked from the data path for every packet transmitted through an ip6gre netdev, leading to high CPU utilization. Fix that by rate limiting the messages. Fixes: 09c6bbf090ec ("[IPV6]: Do mandatory IPv6 tunnel endpoint checks in realtime") Reported-by: Maksym Yaremchuk <maksymy@nvidia.com> Tested-by: Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08scsi: bnx2fc: Flush destroy_work queue before calling bnx2fc_interface_put()John Meneghini
commit 847f9ea4c5186fdb7b84297e3eeed9e340e83fce upstream. The bnx2fc_destroy() functions are removing the interface before calling destroy_work. This results multiple WARNings from sysfs_remove_group() as the controller rport device attributes are removed too early. Replace the fcoe_port's destroy_work queue. It's not needed. The problem is easily reproducible with the following steps. Example: $ dmesg -w & $ systemctl enable --now fcoe $ fipvlan -s -c ens2f1 $ fcoeadm -d ens2f1.802 [ 583.464488] host2: libfc: Link down on port (7500a1) [ 583.472651] bnx2fc: 7500a1 - rport not created Yet!! [ 583.490468] ------------[ cut here ]------------ [ 583.538725] sysfs group 'power' not found for kobject 'rport-2:0-0' [ 583.568814] WARNING: CPU: 3 PID: 192 at fs/sysfs/group.c:279 sysfs_remove_group+0x6f/0x80 [ 583.607130] Modules linked in: dm_service_time 8021q garp mrp stp llc bnx2fc cnic uio rpcsec_gss_krb5 auth_rpcgss nfsv4 ... [ 583.942994] CPU: 3 PID: 192 Comm: kworker/3:2 Kdump: loaded Not tainted 5.14.0-39.el9.x86_64 #1 [ 583.984105] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 [ 584.016535] Workqueue: fc_wq_2 fc_rport_final_delete [scsi_transport_fc] [ 584.050691] RIP: 0010:sysfs_remove_group+0x6f/0x80 [ 584.074725] Code: ff 5b 48 89 ef 5d 41 5c e9 ee c0 ff ff 48 89 ef e8 f6 b8 ff ff eb d1 49 8b 14 24 48 8b 33 48 c7 c7 ... [ 584.162586] RSP: 0018:ffffb567c15afdc0 EFLAGS: 00010282 [ 584.188225] RAX: 0000000000000000 RBX: ffffffff8eec4220 RCX: 0000000000000000 [ 584.221053] RDX: ffff8c1586ce84c0 RSI: ffff8c1586cd7cc0 RDI: ffff8c1586cd7cc0 [ 584.255089] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffb567c15afc00 [ 584.287954] R10: ffffb567c15afbf8 R11: ffffffff8fbe7f28 R12: ffff8c1486326400 [ 584.322356] R13: ffff8c1486326480 R14: ffff8c1483a4a000 R15: 0000000000000004 [ 584.355379] FS: 0000000000000000(0000) GS:ffff8c1586cc0000(0000) knlGS:0000000000000000 [ 584.394419] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 584.421123] CR2: 00007fe95a6f7840 CR3: 0000000107674002 CR4: 00000000000606e0 [ 584.454888] Call Trace: [ 584.466108] device_del+0xb2/0x3e0 [ 584.481701] device_unregister+0x13/0x60 [ 584.501306] bsg_unregister_queue+0x5b/0x80 [ 584.522029] bsg_remove_queue+0x1c/0x40 [ 584.541884] fc_rport_final_delete+0xf3/0x1d0 [scsi_transport_fc] [ 584.573823] process_one_work+0x1e3/0x3b0 [ 584.592396] worker_thread+0x50/0x3b0 [ 584.609256] ? rescuer_thread+0x370/0x370 [ 584.628877] kthread+0x149/0x170 [ 584.643673] ? set_kthread_struct+0x40/0x40 [ 584.662909] ret_from_fork+0x22/0x30 [ 584.680002] ---[ end trace 53575ecefa942ece ]--- Link: https://lore.kernel.org/r/20220115040044.1013475-1-jmeneghi@redhat.com Fixes: 0cbf32e1681d ("[SCSI] bnx2fc: Avoid calling bnx2fc_if_destroy with unnecessary locks") Tested-by: Guangwu Zhang <guazhang@redhat.com> Co-developed-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08rpmsg: char: Fix race between the release of rpmsg_eptdev and cdevMatthias Kaehlcke
commit 7a534ae89e34e9b51acb5a63dd0f88308178b46a upstream. struct rpmsg_eptdev contains a struct cdev. The current code frees the rpmsg_eptdev struct in rpmsg_eptdev_destroy(), but the cdev is a managed object, therefore its release is not predictable and the rpmsg_eptdev could be freed before the cdev is entirely released. The cdev_device_add/del() API was created to address this issue (see commit '233ed09d7fda ("chardev: add helper function to register char devs with a struct device")'), use it instead of cdev add/del(). Fixes: c0cdc19f84a4 ("rpmsg: Driver for user space endpoint interface") Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220110104706.v6.2.Idde68b05b88d4a2e6e54766c653f3a6d9e419ce6@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08rpmsg: char: Fix race between the release of rpmsg_ctrldev and cdevSujit Kautkar
commit b7fb2dad571d1e21173c06cef0bced77b323990a upstream. struct rpmsg_ctrldev contains a struct cdev. The current code frees the rpmsg_ctrldev struct in rpmsg_ctrldev_release_device(), but the cdev is a managed object, therefore its release is not predictable and the rpmsg_ctrldev could be freed before the cdev is entirely released, as in the backtrace below. [ 93.625603] ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x7c [ 93.636115] WARNING: CPU: 0 PID: 12 at lib/debugobjects.c:488 debug_print_object+0x13c/0x1b0 [ 93.644799] Modules linked in: veth xt_cgroup xt_MASQUERADE rfcomm algif_hash algif_skcipher af_alg uinput ip6table_nat fuse uvcvideo videobuf2_vmalloc venus_enc venus_dec videobuf2_dma_contig hci_uart btandroid btqca snd_soc_rt5682_i2c bluetooth qcom_spmi_temp_alarm snd_soc_rt5682v [ 93.715175] CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: G B 5.4.163-lockdep #26 [ 93.723855] Hardware name: Google Lazor (rev3 - 8) with LTE (DT) [ 93.730055] Workqueue: events kobject_delayed_cleanup [ 93.735271] pstate: 60c00009 (nZCv daif +PAN +UAO) [ 93.740216] pc : debug_print_object+0x13c/0x1b0 [ 93.744890] lr : debug_print_object+0x13c/0x1b0 [ 93.749555] sp : ffffffacf5bc7940 [ 93.752978] x29: ffffffacf5bc7940 x28: dfffffd000000000 [ 93.758448] x27: ffffffacdb11a800 x26: dfffffd000000000 [ 93.763916] x25: ffffffd0734f856c x24: dfffffd000000000 [ 93.769389] x23: 0000000000000000 x22: ffffffd0733c35b0 [ 93.774860] x21: ffffffd0751994a0 x20: ffffffd075ec27c0 [ 93.780338] x19: ffffffd075199100 x18: 00000000000276e0 [ 93.785814] x17: 0000000000000000 x16: dfffffd000000000 [ 93.791291] x15: ffffffffffffffff x14: 6e6968207473696c [ 93.796768] x13: 0000000000000000 x12: ffffffd075e2b000 [ 93.802244] x11: 0000000000000001 x10: 0000000000000000 [ 93.807723] x9 : d13400dff1921900 x8 : d13400dff1921900 [ 93.813200] x7 : 0000000000000000 x6 : 0000000000000000 [ 93.818676] x5 : 0000000000000080 x4 : 0000000000000000 [ 93.824152] x3 : ffffffd0732a0fa4 x2 : 0000000000000001 [ 93.829628] x1 : ffffffacf5bc7580 x0 : 0000000000000061 [ 93.835104] Call trace: [ 93.837644] debug_print_object+0x13c/0x1b0 [ 93.841963] __debug_check_no_obj_freed+0x25c/0x3c0 [ 93.846987] debug_check_no_obj_freed+0x18/0x20 [ 93.851669] slab_free_freelist_hook+0xbc/0x1e4 [ 93.856346] kfree+0xfc/0x2f4 [ 93.859416] rpmsg_ctrldev_release_device+0x78/0xb8 [ 93.864445] device_release+0x84/0x168 [ 93.868310] kobject_cleanup+0x12c/0x298 [ 93.872356] kobject_delayed_cleanup+0x10/0x18 [ 93.876948] process_one_work+0x578/0x92c [ 93.881086] worker_thread+0x804/0xcf8 [ 93.884963] kthread+0x2a8/0x314 [ 93.888303] ret_from_fork+0x10/0x18 The cdev_device_add/del() API was created to address this issue (see commit '233ed09d7fda ("chardev: add helper function to register char devs with a struct device")'), use it instead of cdev add/del(). Fixes: c0cdc19f84a4 ("rpmsg: Driver for user space endpoint interface") Signed-off-by: Sujit Kautkar <sujitka@chromium.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220110104706.v6.1.Iaac908f3e3149a89190ce006ba166e2d3fd247a3@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08i40e: fix unsigned stat widthsJoe Damato
commit 3b8428b84539c78fdc8006c17ebd25afd4722d51 upstream. Change i40e_update_vsi_stats and struct i40e_vsi to use u64 fields to match the width of the stats counters in struct i40e_rx_queue_stats. Update debugfs code to use the correct format specifier for u64. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Joe Damato <jdamato@fastly.com> Reported-by: kernel test robot <lkp@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08i40e: Increase delay to 1 s after global EMP resetJedrzej Jagielski
commit 9b13bd53134c9ddd544a790125199fdbdb505e67 upstream. Recently simplified i40e_rebuild causes that FW sometimes is not ready after NVM update, the ping does not return. Increase the delay in case of EMP reset. Old delay of 300 ms was introduced for specific cards for 710 series. Now it works for all the cards and delay was increased. Fixes: 1fa51a650e1d ("i40e: Add delay after EMP reset for firmware to recover") Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08lkdtm: Fix content of section containing lkdtm_rodata_do_nothing()Christophe Leroy
commit bc93a22a19eb2b68a16ecf04cdf4b2ed65aaf398 upstream. On a kernel without CONFIG_STRICT_KERNEL_RWX, running EXEC_RODATA test leads to "Illegal instruction" failure. Looking at the content of rodata_objcopy.o, we see that the function content zeroes only: Disassembly of section .rodata: 0000000000000000 <.lkdtm_rodata_do_nothing>: 0: 00 00 00 00 .long 0x0 Add the contents flag in order to keep the content of the section while renaming it. Disassembly of section .rodata: 0000000000000000 <.lkdtm_rodata_do_nothing>: 0: 4e 80 00 20 blr Fixes: e9e08a07385e ("lkdtm: support llvm-objcopy") Cc: stable@vger.kernel.org Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/8900731fbc05fb8b0de18af7133a8fc07c3c53a1.1633712176.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08powerpc/32: Fix boot failure with GCC latent entropy pluginChristophe Leroy
commit bba496656a73fc1d1330b49c7f82843836e9feb1 upstream. Boot fails with GCC latent entropy plugin enabled. This is due to early boot functions trying to access 'latent_entropy' global data while the kernel is not relocated at its final destination yet. As there is no way to tell GCC to use PTRRELOC() to access it, disable latent entropy plugin in early_32.o and feature-fixups.o and code-patching.o Fixes: 38addce8b600 ("gcc-plugins: Add latent_entropy plugin") Cc: stable@vger.kernel.org # v4.9+ Reported-by: Erhard Furtner <erhard_f@mailbox.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215217 Link: https://lore.kernel.org/r/2bac55483b8daf5b1caa163a45fa5f9cdbe18be4.1640178426.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08net: sfp: ignore disabled SFP nodeMarek Behún
commit 2148927e6ed43a1667baf7c2ae3e0e05a44b51a0 upstream. Commit ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices and sfp cages") added code which finds SFP bus DT node even if the node is disabled with status = "disabled". Because of this, when phylink is created, it ends with non-null .sfp_bus member, even though the SFP module is not probed (because the node is disabled). We need to ignore disabled SFP bus node. Fixes: ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices and sfp cages") Signed-off-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org # 2203cbf2c8b5 ("net: sfp: move fwnode parsing into sfp-bus layer") Signed-off-by: David S. Miller <davem@davemloft.net> [ backport to 4.14 ] Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08usb: typec: tcpm: Do not disconnect while receiving VBUS offBadhri Jagan Sridharan
commit 90b8aa9f5b09edae6928c0561f933fec9f7a9987 upstream. With some chargers, vbus might momentarily raise above VSAFE5V and fall back to 0V before tcpm gets to read port->tcpc->get_vbus. This will will report a VBUS off event causing TCPM to transition to SNK_UNATTACHED where it should be waiting in either SNK_ATTACH_WAIT or SNK_DEBOUNCED state. This patch makes TCPM avoid vbus off events while in SNK_ATTACH_WAIT or SNK_DEBOUNCED state. Stub from the spec: "4.5.2.2.4.2 Exiting from AttachWait.SNK State A Sink shall transition to Unattached.SNK when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce. A DRP shall transition to Unattached.SRC when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce." [23.194131] CC1: 0 -> 0, CC2: 0 -> 5 [state SNK_UNATTACHED, polarity 0, connected] [23.201777] state change SNK_UNATTACHED -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [23.209949] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [23.300579] VBUS off [23.300668] state change SNK_ATTACH_WAIT -> SNK_UNATTACHED [rev3 NONE_AMS] [23.301014] VBUS VSAFE0V [23.301111] Start toggling Fixes: f0690a25a140b8 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable@vger.kernel.org Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20220122015520.332507-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08USB: core: Fix hang in usb_kill_urb by adding memory barriersAlan Stern
commit 26fbe9772b8c459687930511444ce443011f86bf upstream. The syzbot fuzzer has identified a bug in which processes hang waiting for usb_kill_urb() to return. It turns out the issue is not unlinking the URB; that works just fine. Rather, the problem arises when the wakeup notification that the URB has completed is not received. The reason is memory-access ordering on SMP systems. In outline form, usb_kill_urb() and __usb_hcd_giveback_urb() operating concurrently on different CPUs perform the following actions: CPU 0 CPU 1 ---------------------------- --------------------------------- usb_kill_urb(): __usb_hcd_giveback_urb(): ... ... atomic_inc(&urb->reject); atomic_dec(&urb->use_count); ... ... wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0); if (atomic_read(&urb->reject)) wake_up(&usb_kill_urb_queue); Confining your attention to urb->reject and urb->use_count, you can see that the overall pattern of accesses on CPU 0 is: write urb->reject, then read urb->use_count; whereas the overall pattern of accesses on CPU 1 is: write urb->use_count, then read urb->reject. This pattern is referred to in memory-model circles as SB (for "Store Buffering"), and it is well known that without suitable enforcement of the desired order of accesses -- in the form of memory barriers -- it is entirely possible for one or both CPUs to execute their reads ahead of their writes. The end result will be that sometimes CPU 0 sees the old un-decremented value of urb->use_count while CPU 1 sees the old un-incremented value of urb->reject. Consequently CPU 0 ends up on the wait queue and never gets woken up, leading to the observed hang in usb_kill_urb(). The same pattern of accesses occurs in usb_poison_urb() and the failure pathway of usb_hcd_submit_urb(). The problem is fixed by adding suitable memory barriers. To provide proper memory-access ordering in the SB pattern, a full barrier is required on both CPUs. The atomic_inc() and atomic_dec() accesses themselves don't provide any memory ordering, but since they are present, we can use the optimized smp_mb__after_atomic() memory barrier in the various routines to obtain the desired effect. This patch adds the necessary memory barriers. CC: <stable@vger.kernel.org> Reported-and-tested-by: syzbot+76629376e06e2c2ad626@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/Ye8K0QYee0Q0Nna2@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08usb: gadget: f_sourcesink: Fix isoc transfer for USB_SPEED_SUPER_PLUSPavankumar Kondeti
commit 904edf8aeb459697129be5fde847e2a502f41fd9 upstream. Currently when gadget enumerates in super speed plus, the isoc endpoint request buffer size is not calculated correctly. Fix this by checking the gadget speed against USB_SPEED_SUPER_PLUS and update the request buffer size. Fixes: 90c4d05780d4 ("usb: fix various gadgets null ptr deref on 10gbps cabling.") Cc: stable <stable@vger.kernel.org> Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Link: https://lore.kernel.org/r/1642820602-20619-1-git-send-email-quic_pkondeti@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08usb: common: ulpi: Fix crash in ulpi_match()Jon Hunter
commit 2e3dd4a6246945bf84ea6f478365d116e661554c upstream. Commit 7495af930835 ("ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c") enables the CONFIG_PHY_QCOM_USB_HS for the ARM multi_v7_defconfig. Enabling this Kconfig is causing the kernel to crash on the Tegra20 Ventana platform in the ulpi_match() function. The Qualcomm USB HS PHY driver that is enabled by CONFIG_PHY_QCOM_USB_HS, registers a ulpi_driver but this driver does not provide an 'id_table', so when ulpi_match() is called on the Tegra20 Ventana platform, it crashes when attempting to deference the id_table pointer which is not valid. The Qualcomm USB HS PHY driver uses device-tree for matching the ULPI driver with the device and so fix this crash by using device-tree for matching if the id_table is not valid. Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT") Cc: stable <stable@vger.kernel.org> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20220117150039.44058-1-jonathanh@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08usb-storage: Add unusual-devs entry for VL817 USB-SATA bridgeAlan Stern
commit 5b67b315037250a61861119683e7fcb509deea25 upstream. Two people have reported (and mentioned numerous other reports on the web) that VIA's VL817 USB-SATA bridge does not work with the uas driver. Typical log messages are: [ 3606.232149] sd 14:0:0:0: [sdg] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD [ 3606.232154] sd 14:0:0:0: [sdg] tag#2 CDB: Write(16) 8a 00 00 00 00 00 18 0c c9 80 00 00 00 80 00 00 [ 3606.306257] usb 4-4.4: reset SuperSpeed Plus Gen 2x1 USB device number 11 using xhci_hcd [ 3606.328584] scsi host14: uas_eh_device_reset_handler success Surprisingly, the devices do seem to work okay for some other people. The cause of the differing behaviors is not known. In the hope of getting the devices to work for the most users, even at the possible cost of degraded performance for some, this patch adds an unusual_devs entry for the VL817 to block it from binding to the uas driver by default. Users will be able to override this entry by means of a module parameter, if they want. CC: <stable@vger.kernel.org> Reported-by: DocMAX <mail@vacharakis.de> Reported-and-tested-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/Ye8IsK2sjlEv1rqU@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08tty: Add support for Brainboxes UC cards.Cameron Williams
commit 152d1afa834c84530828ee031cf07a00e0fc0b8c upstream. This commit adds support for the some of the Brainboxes PCI range of cards, including the UC-101, UC-235/246, UC-257, UC-268, UC-275/279, UC-302, UC-310, UC-313, UC-320/324, UC-346, UC-357, UC-368 and UC-420/431. Signed-off-by: Cameron Williams <cang1@live.co.uk> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/AM5PR0202MB2564688493F7DD9B9C610827C45E9@AM5PR0202MB2564.eurprd02.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08tty: n_gsm: fix SW flow control encoding/handlingdaniel.starke@siemens.com
commit 8838b2af23caf1ff0610caef2795d6668a013b2d upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.2.7.3 states that DC1 (XON) and DC3 (XOFF) are the control characters defined in ISO/IEC 646. These shall be quoted if seen in the data stream to avoid interpretation as flow control characters. ISO/IEC 646 refers to the set of ISO standards described as the ISO 7-bit coded character set for information interchange. Its final version is also known as ITU T.50. See https://www.itu.int/rec/T-REC-T.50-199209-I/en To abide the standard it is needed to quote DC1 and DC3 correctly if these are seen as data bytes and not as control characters. The current implementation already tries to enforce this but fails to catch all defined cases. 3GPP 27.010 chapter 5.2.7.3 clearly states that the most significant bit shall be ignored for DC1 and DC3 handling. The current implementation handles only the case with the most significant bit set 0. Cases in which DC1 and DC3 have the most significant bit set 1 are left unhandled. This patch fixes this by masking the data bytes with ISO_IEC_646_MASK (only the 7 least significant bits set 1) before comparing them with XON (a.k.a. DC1) and XOFF (a.k.a. DC3) when testing which byte values need quotation via byte stuffing. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220120101857.2509-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08serial: stm32: fix software flow control transferValentin Caron
commit 037b91ec7729524107982e36ec4b40f9b174f7a2 upstream. x_char is ignored by stm32_usart_start_tx() when xmit buffer is empty. Fix start_tx condition to allow x_char to be sent. Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver") Cc: stable <stable@vger.kernel.org> Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com> Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20220111164441.6178-3-valentin.caron@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08netfilter: nft_payload: do not update layer 4 checksum when mangling fragmentsPablo Neira Ayuso
commit 4e1860a3863707e8177329c006d10f9e37e097a8 upstream. IP fragments do not come with the transport header, hence skip bogus layer 4 checksum updates. Fixes: 1814096980bb ("netfilter: nft_payload: layer 4 checksum adjustment for pseudoheader fields") Reported-and-tested-by: Steffen Weinreich <steve@weinreich.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08PM: wakeup: simplify the output logic of pm_show_wakelocks()Greg Kroah-Hartman
commit c9d967b2ce40d71e968eb839f36c936b8a9cf1ea upstream. The buffer handling in pm_show_wakelocks() is tricky, and hopefully correct. Ensure it really is correct by using sysfs_emit_at() which handles all of the tricky string handling logic in a PAGE_SIZE buffer for us automatically as this is a sysfs file being read from. Reviewed-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08udf: Fix NULL ptr deref when converting from inline formatJan Kara
commit 7fc3b7c2981bbd1047916ade327beccb90994eee upstream. udf_expand_file_adinicb() calls directly ->writepage to write data expanded into a page. This however misses to setup inode for writeback properly and so we can crash on inode->i_wb dereference when submitting page for IO like: BUG: kernel NULL pointer dereference, address: 0000000000000158 #PF: supervisor read access in kernel mode ... <TASK> __folio_start_writeback+0x2ac/0x350 __block_write_full_page+0x37d/0x490 udf_expand_file_adinicb+0x255/0x400 [udf] udf_file_write_iter+0xbe/0x1b0 [udf] new_sync_write+0x125/0x1c0 vfs_write+0x28e/0x400 Fix the problem by marking the page dirty and going through the standard writeback path to write the page. Strictly speaking we would not even have to write the page but we want to catch e.g. ENOSPC errors early. Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com> CC: stable@vger.kernel.org Fixes: 52ebea749aae ("writeback: make backing_dev_info host cgroup-specific bdi_writebacks") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08udf: Restore i_lenAlloc when inode expansion failsJan Kara
commit ea8569194b43f0f01f0a84c689388542c7254a1f upstream. When we fail to expand inode from inline format to a normal format, we restore inode to contain the original inline formatting but we forgot to set i_lenAlloc back. The mismatch between i_lenAlloc and i_size was then causing further problems such as warnings and lost data down the line. Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com> CC: stable@vger.kernel.org Fixes: 7e49b6f2480c ("udf: Convert UDF to new truncate calling sequence") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08scsi: zfcp: Fix failed recovery on gone remote port with non-NPIV FCP devicesSteffen Maier
commit 8c9db6679be4348b8aae108e11d4be2f83976e30 upstream. Suppose we have an environment with a number of non-NPIV FCP devices (virtual HBAs / FCP devices / zfcp "adapter"s) sharing the same physical FCP channel (HBA port) and its I_T nexus. Plus a number of storage target ports zoned to such shared channel. Now one target port logs out of the fabric causing an RSCN. Zfcp reacts with an ADISC ELS and subsequent port recovery depending on the ADISC result. This happens on all such FCP devices (in different Linux images) concurrently as they all receive a copy of this RSCN. In the following we look at one of those FCP devices. Requests other than FSF_QTCB_FCP_CMND can be slow until they get a response. Depending on which requests are affected by slow responses, there are different recovery outcomes. Here we want to fix failed recoveries on port or adapter level by avoiding recovery requests that can be slow. We need the cached N_Port_ID for the remote port "link" test with ADISC. Just before sending the ADISC, we now intentionally forget the old cached N_Port_ID. The idea is that on receiving an RSCN for a port, we have to assume that any cached information about this port is stale. This forces a fresh new GID_PN [FC-GS] nameserver lookup on any subsequent recovery for the same port. Since we typically can still communicate with the nameserver efficiently, we now reach steady state quicker: Either the nameserver still does not know about the port so we stop recovery, or the nameserver already knows the port potentially with a new N_Port_ID and we can successfully and quickly perform open port recovery. For the one case, where ADISC returns successfully, we re-initialize port->d_id because that case does not involve any port recovery. This also solves a problem if the storage WWPN quickly logs into the fabric again but with a different N_Port_ID. Such as on virtual WWPN takeover during target NPIV failover. [https://www.redbooks.ibm.com/abstracts/redp5477.html] In that case the RSCN from the storage FDISC was ignored by zfcp and we could not successfully recover the failover. On some later failback on the storage, we could have been lucky if the virtual WWPN got the same old N_Port_ID from the SAN switch as we still had cached. Then the related RSCN triggered a successful port reopen recovery. However, there is no guarantee to get the same N_Port_ID on NPIV FDISC. Even though NPIV-enabled FCP devices are not affected by this problem, this code change optimizes recovery time for gone remote ports as a side effect. The timely drop of cached N_Port_IDs prevents unnecessary slow open port attempts. While the problem might have been in code before v2.6.32 commit 799b76d09aee ("[SCSI] zfcp: Decouple gid_pn requests from erp") this fix depends on the gid_pn_work introduced with that commit, so we mark it as culprit to satisfy fix dependencies. Note: Point-to-point remote port is already handled separately and gets its N_Port_ID from the cached peer_d_id. So resetting port->d_id in general does not affect PtP. Link: https://lore.kernel.org/r/20220118165803.3667947-1-maier@linux.ibm.com Fixes: 799b76d09aee ("[SCSI] zfcp: Decouple gid_pn requests from erp") Cc: <stable@vger.kernel.org> #2.6.32+ Suggested-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08s390/hypfs: include z/VM guests with access control group setVasily Gorbik
commit 663d34c8df98740f1e90241e78e456d00b3c6cad upstream. Currently if z/VM guest is allowed to retrieve hypervisor performance data globally for all guests (privilege class B) the query is formed in a way to include all guests but the group name is left empty. This leads to that z/VM guests which have access control group set not being included in the results (even local vm). Change the query group identifier from empty to "any" to retrieve information about all guests from any groups (or without a group set). Cc: stable@vger.kernel.org Fixes: 31cb4bd31a48 ("[S390] Hypervisor filesystem (s390_hypfs) for z/VM") Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08Bluetooth: refactor malicious adv data checkBrian Gix
commit 899663be5e75dc0174dc8bda0b5e6826edf0b29a upstream. Check for out-of-bound read was being performed at the end of while num_reports loop, and would fill journal with false positives. Added check to beginning of loop processing so that it doesn't get checked after ptr has been advanced. Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: syphyr <syphyr@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-29Linux 4.14.264Greg Kroah-Hartman
Link: https://lore.kernel.org/r/20220127180256.764665162@linuxfoundation.org Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-29drm/vmwgfx: Fix stale file descriptors on failed usercopyMathias Krause
commit a0f90c8815706981c483a652a6aefca51a5e191c upstream. A failing usercopy of the fence_rep object will lead to a stale entry in the file descriptor table as put_unused_fd() won't release it. This enables userland to refer to a dangling 'file' object through that still valid file descriptor, leading to all kinds of use-after-free exploitation scenarios. Fix this by deferring the call to fd_install() until after the usercopy has succeeded. Fixes: c906965dee22 ("drm/vmwgfx: Add export fence to file descriptor support") Signed-off-by: Mathias Krause <minipli@grsecurity.net> Signed-off-by: Zack Rusin <zackr@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-29can: bcm: fix UAF of bcm opZiyang Xuan
Stopping tasklet and hrtimer rely on the active state of tasklet and hrtimer sequentially in bcm_remove_op(), the op object will be freed if they are all unactive. Assume the hrtimer timeout is short, the hrtimer cb has been excuted after tasklet conditional judgment which must be false after last round tasklet_kill() and before condition hrtimer_active(), it is false when execute to hrtimer_active(). Bug is triggerd, because the stopping action is end and the op object will be freed, but the tasklet is scheduled. The resources of the op object will occur UAF bug. Move hrtimer_cancel() behind tasklet_kill() and switch 'while () {...}' to 'do {...} while ()' to fix the op UAF problem. Fixes: a06393ed0316 ("can: bcm: fix hrtimer/tasklet termination in bcm op removal") Reported-by: syzbot+5ca851459ed04c778d1d@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-18 08:29:45 +0000