| Age | Commit message (Collapse) | Author |
|---|
|
binutils prior to 2.18 (e.g. the ones found on SLE10) don't support
assembling PEXTRD, so a macro based approach like the one for PCLMULQDQ
in the same file should be used.
This requires making the helper macros capable of recognizing 32-bit
general purpose register operands.
[ hpa: tagging for stable as it is a low risk build fix ]
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/51A6142A02000078000D99D8@nat28.tlf.novell.com
Cc: Alexander Boyko <alexander_boyko@xyratex.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Huang Ying <ying.huang@intel.com>
Cc: <stable@vger.kernel.org> v3.9
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Pull Xen fixes from Konrad Rzeszutek Wilk:
- Use proper error paths
- Clean up APIC IPI usage (incorrect arguments)
- Delay XenBus frontend resume is backend (xenstored) is not running
- Fix build error with various combinations of CONFIG_
* tag 'stable/for-linus-3.10-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xenbus_client.c: correct exit path for xenbus_map_ring_valloc_hvm
xen-pciback: more uses of cached MSI-X capability offset
xen: Clean up apic ipi interface
xenbus: save xenstore local status for later use
xenbus: delay xenbus frontend resume if xenstored is not running
xmem/tmem: fix 'undefined variable' build error.
|
|
Commit a819c4f1 (ARM: OMAP3: PM: Only access IVA if one exists)
changed PM to not access IVA registers on omaps that don't have
them. Turns out we still need to idle iva2 as otherwise
iva2_pwrdm will stay on and block deeper idle states.
It seems that the only part of the reset that may not be needed
is the setting of the iva2 boot mode to idle. But as that register
seems to be there and is harmless if no iva2 is on the SoC, it's
probably safest to do the complete reset.
Acked-by: Mark A. Greer <mgreer@animalcreek.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Merge mn10300 fixes from David Howells.
* emailed patches from David Howells <dhowells@redhat.com>:
MN10300: Need pci_iomap() and __pci_ioport_map() defining
MN10300: ASB2305's PCI code needs the definition of XIRQ1
MN10300: Enable IRQs more in system call exit work path
MN10300: Fix ret_from_kernel_thread
|
|
Include the generic definitions of pci_iomap() and __pci_ioport_map()
otherwise we can get errors like:
lib/pci_iomap.c: In function 'pci_iomap':
lib/pci_iomap.c:37: error: implicit declaration of function '__pci_ioport_map'
lib/pci_iomap.c:37: warning: return makes pointer from integer without a cast
and:
drivers/pci/quirks.c: In function 'disable_igfx_irq':
drivers/pci/quirks.c:2893: error: implicit declaration of function 'pci_iomap'
drivers/pci/quirks.c:2893: warning: initialization makes pointer from integer without a cast
drivers/pci/quirks.c: In function 'reset_ivb_igd':
drivers/pci/quirks.c:3133: warning: assignment makes pointer from integer without a cast
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Ken Cox <jkc@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The code for PCI in the ASB2305 needs the definition of XIRQ1 from proc/irq.h
otherwise the following error appears:
arch/mn10300/unit-asb2305/pci.c: In function 'unit_pci_init':
arch/mn10300/unit-asb2305/pci.c:481: error: 'XIRQ1' undeclared (first use in this function)
arch/mn10300/unit-asb2305/pci.c:481: error: (Each undeclared identifier is reported only once
arch/mn10300/unit-asb2305/pci.c:481: error: for each function it appears in.)
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Ken Cox <jkc@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Enable IRQs when calling schedule() for TIF_NEED_RESCHED and
do_notify_resume(). If interrupts are enabled during do_notify_resume(), a
warning can be seen (see lower down).
Whilst we're at it, resume_userspace can be made local to entry.S as it is not
called outside of there and it can be merged with the part of work_resched that
occurs after schedule() is called.
WARNING: at kernel/softirq.c:160 local_bh_enable+0x42/0xa0()
Call Trace:
local_bh_enable+0x42/0xa0
unix_release_sock+0x86/0x23c
unix_release+0x20/0x28
sock_release+0x17/0x88
sock_close+0x20/0x28
__fput+0xc9/0x1fc
____fput+0xb/0x10
task_work_run+0x64/0x78
do_notify_resume+0x53d/0x544
work_notifysig+0xa/0xc
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Ken Cox <jkc@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ret_from_kernel_thread needs to set A2 to the thread_info pointer before
jumping to syscall_exit.
Without this, we never correctly start userspace.
This was caused by the rejuggling of the fork/exec paths in commit
ddf23e87a804 ("mn10300: switch to saner kernel_execve() semantics")
Reported-by: Ken Cox <jkc@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Ken Cox <jkc@redhat.com>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin-control fixes from Linus Walleij:
- Six patches fixing up the suspend/resume and wakeup handling of the
Samsung and Exynos drivers.
- Errorpath fixes for four different drivers. All on the probe()
errorpath.
- Make the debugfs code for pin config take the right mutex.
* tag 'pinctrl-fixes-v3.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: pinconf: take the right mutex
pinctrl: sunxi: fix error return code in sunxi_pinctrl_probe()
pinctrl: exynos: Handle suspend/resume of GPIO EINT registers
pinctrl: samsung: Allow per-bank SoC-specific private data
pinctrl: samsung: Add support for SoC-specific suspend/resume callbacks
pinctrl: Don't override the error code in probe error handling
ARM: EXYNOS: Fix EINT wake-up mask configuration when pinctrl is used
pinctrl: exynos: Add support for set_irq_wake of wake-up EINTs
pinctrl: samsung: fix suspend/resume functionality
|
|
Commit f447d56d36af18c5104ff29dcb1327c0c0ac3634 introduced the
implementation of the PV apic ipi interface. But there were some
odd things (it seems none of which cause really any issue but
maybe they should be cleaned up anyway):
- xen_send_IPI_mask_allbutself (and by that xen_send_IPI_allbutself)
ignore the passed in vector and only use the CALL_FUNCTION_SINGLE
vector. While xen_send_IPI_all and xen_send_IPI_mask use the vector.
- physflat_send_IPI_allbutself is declared unnecessarily. It is never
used.
This patch tries to clean up those things.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM Exynos fixes from Olof Johansson:
"Here's a shorter set of fixes for 3.10, all for Samsung Exynos
platforms.
It also includes a defconfig update so that exynos_defconfig provides
a meaningful set of drivers to boot an unmodified kernel on the
Samsung ARM-based Chromebooks."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: exynos: defconfig update
ARM: SAMSUNG: Add names to fimd0 IRQ resources
ARM: EXYNOS: fix software reset logic for EXYNOS5440 SOC
ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC
ARM: dts: Enabling samsung-usb2phy driver for exynos5250
|
|
This turns on a number of configs that are useful on the Chromebook, but also
good to have on in general:
* USB host and MMC drivers(!)
* I2C GPIO arbitration driver
* CYAPA trackpad driver
* simplefb
* CROS EC and keyboard drivers
* S5M8767 driver
* MAX77686 drivers
* MAX8997 driver
* DEVTMPFS + mount
* DM_CRYPT (as module)
* CRYPTOLOOP
* HIGHMEM
* PRINTK timestamps
This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel
uart to uart 3 (which is only used to show the "uncompressing kernel"
message at boot, it seems).
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Tushar Behera <tushar.behera@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
In head_64.S, a switchover has been used to handle kernel crossing
1G, 512G boundaries.
And commit 8170e6bed465b4b0c7687f93e9948aca4358a33b
x86, 64bit: Use a #PF handler to materialize early mappings on demand
said:
During the switchover in head_64.S, before #PF handler is available,
we use three pages to handle kernel crossing 1G, 512G boundaries with
sharing page by playing games with page aliasing: the same page is
mapped twice in the higher-level tables with appropriate wraparound.
But from the switchover code, when we set up the PUD table:
114 addq $4096, %rdx
115 movq %rdi, %rax
116 shrq $PUD_SHIFT, %rax
117 andl $(PTRS_PER_PUD-1), %eax
118 movq %rdx, (4096+0)(%rbx,%rax,8)
119 movq %rdx, (4096+8)(%rbx,%rax,8)
It seems line 119 has a potential bug there. For example,
if the kernel is loaded at physical address 511G+1008M, that is
000000000 111111111 111111000 000000000000000000000
and the kernel _end is 512G+2M, that is
000000001 000000000 000000001 000000000000000000000
So in this example, when using the 2nd page to setup PUD (line 114~119),
rax is 511.
In line 118, we put rdx which is the address of the PMD page (the 3rd page)
into entry 511 of the PUD table. But in line 119, the entry we calculate from
(4096+8)(%rbx,%rax,8) has exceeded the PUD page. IMO, the entry in line
119 should be wraparound into entry 0 of the PUD table.
The patch fixes the bug.
Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/5191DE5A.3020302@cn.fujitsu.com
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: <stable@vger.kernel.org> v3.9
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
Pull crypto fixes from Herbert Xu:
"This push fixes a crash in the new sha256_ssse3 driver as well as a
DMA setup/teardown bug in caam"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: sha256_ssse3 - fix stack corruption with SSSE3 and AVX implementations
crypto: caam - fix inconsistent assoc dma mapping direction
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k fixes from Geert Uytterhoeven:
- futex support that I had missed before,
- A long-overdue update of the m68k defconfigs.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Update defconfigs for v3.9
m68k: implement futex.h to support userspace robust futexes and PI mutexes
|
|
Pull microblaze fixes from Michal Simek:
"One patch fix futex support and my patches fix warnings which were
reported by Geert's regression testing"
* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Reversed logic in futex cmpxchg
microblaze: Use proper casting for inb/inw/inl in io.h
microblaze: Initialize temp variable to remove compilation warning
|
|
When adding CPU to the SMP group and enabling the coherency on this
CPU we must protect the register access.
The previous implementation claims to be atomic but doesn't provide
any protection against parallel access to the coherency fabric control
and configuration registers.
This patch fixes this by using the ldrex and strex mechanism.
This method should be used in all accesses to those registers.
[gregory.clement@free-electrons.com: fixed the commit's topic]
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
|
|
When creating the DT based boards-ts219.c the none DT ts219-setup.c
was used as a template. This includes a lateinit() call to initialize
the PCIe bus. The code makes use of machine_is_ts219() which is never
true on DT, so a FIXME was added and the code left as is. This was
unproblematic until b73690c8f8b5d: "ARM: Kirkwood: Support basic
hotplug for PCI-E" which changes the way the PCIe bus is
initialized. The non-DT ts219-setup.c now crashes during boot. The
lateinit() call in the DT boards-ts219.c is being called,
machine_is_ts219() is true and so the PCIe is initialized a second
time.
This patch removes the useless, and now clearly dangerous, code from
boards-ts219.c, making ts219-setup.c work again.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Cc: <stable@vger.kernel.org> # v3.9.x
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
|
|
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
The _XFER stack element size was set too small, 8 bytes, when it needs to be
16 bytes. As _XFER is the last stack element used by these implementations,
the 16 byte stores with 'movdqa' corrupt the stack where the value of register
%r12 is temporarily stored. As these implementations align the stack pointer
to 16 bytes, this corruption did not happen every time.
Patch corrects this issue.
Reported-by: Julian Wollrath <jwollrath@web.de>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Tested-by: Julian Wollrath <jwollrath@web.de>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes
From Kukjin Kim:
Fixes following for v3.10
- to get usb2 working on the Chromebook with adding the
usb phy node for usb2 on exynos5250
- supporting exynos4210 rev0 SoC
- exynos5440 restart applying only to powered-on domains
- drm-exynos probe failure with adding resource names to
fimd0 platform device
* tag 'samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: SAMSUNG: Add names to fimd0 IRQ resources
ARM: EXYNOS: fix software reset logic for EXYNOS5440 SOC
ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC
ARM: dts: Enabling samsung-usb2phy driver for exynos5250
|
|
On DT-enabled systems pinctrl-exynos driver is responsible for handling
of wake-up EINT interrupts. This patch adjusts wake-up mask
configuration code to take wake-up mask value from pinctrl-exynos driver
on DT-enabled systems.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This patch fixes a bug introduced in the v3.10 merge window.
The AB8500 External Regulator driver has recently landed upstream,
which registers each of the 3 external regulators located on the
AB8500. If these regulators are marked as 'always on', there is a
potential for power-loss. If they're not and are seemingly unused
the Regulator subsystem will attempt to disable them to save power.
This causes an issue for AUX1, AUX2 and AUX3 as they obtain their
power from EXT3. So we're specifying that here to prevent EXT3 from
being powered down.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Multiplatform calls all enabled platforms' initcalls. In the
ux500_idle_init() initcall we call into the DBx500-PRCMU which in turn
executes some ux500 specific register reads/writes. When running on
some !ux500 platforms this ends up causing a kernel Oops. This patch
ensures the PRCMU call is only invoked when running on ux500 based
platforms.
Reported-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
futex_atomic_cmpxchg_inatomic exchanged if the values were
unequal rather than equal. This caused incorrect behavior
of robust futexes.
Signed-off-by: Kirk Meyer <kirk.meyer@sencore.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"This time we made the kernel- and interruption stack allocation
reentrant which fixed some strange kernel crashes (specifically
protection ID traps).
Furthemore this patchset fixes the interrupt stack in UP and SMP
configurations by using native locking instructions. And finally
usage of floating point calculations on parisc were disabled in the
MPILIB."
* 'parisc-for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: fix irq stack on UP and SMP
parisc/superio: Use module_pci_driver to register driver
parisc: make interrupt and interruption stack allocation reentrant
parisc: show number of FPE and unaligned access handler calls in /proc/interrupts
parisc: add additional parisc git tree to MAINTAINERS file
parisc: use PAGE_SHIFT instead of hardcoded value 12 in pacache.S
parisc: add rp5470 entry to machine database
MPILIB: disable usage of floating point registers on parisc
|
|
kcore_vmalloc is in fs/proc/kcore.c and kcore_mem is unused across
the tree. Noticed while grepping the tree for some other kcore stuff.
(score looks pretty unmaintained to me.)
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- Fallouts/wreckage of Cache Flush optimizations / aliasing dcache
support
- Fix for an interesting bug where piped input to grep was getting
mysteriously clobbered
* tag 'arc-v3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: lazy dcache flush broke gdb in non-aliasing configs
ARC: Use enough bits for determining page's cache color
ARC: Brown paper bag bug in macro for checking cache color
ARC: copy_(to|from)_user() to honor usermode-access permissions
ARC: [mm] Prevent stray dcache lines after__sync_icache_dcach()
ARC: [TB10x] Remove redundant abilis,simple-pinctrl mechanism
|
|
Pull ARM fixes from Russell King:
"Just three this time, all really quite small"
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7729/1: vfp: ensure VFP_arch is non-zero when VFP is not supported
ARM: 7727/1: remove the .vm_mm value from gate_vma
ARM: 7723/1: crypto: sha1-armv4-large.S: fix SP handling
|
|
gdbserver inserting a breakpoint ends up calling copy_user_page() for a
code page. The generic version of which (non-aliasing config) didn't set
the PG_arch_1 bit hence update_mmu_cache() didn't sync dcache/icache for
corresponding dynamic loader code page - causing garbade to be executed.
So now aliasing versions of copy_user_highpage()/clear_page() are made
default. There is no significant overhead since all of special alias
handling code is compiled out for non-aliasing build
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"We didn't have any fixes sent up for -rc2, so this is a slightly
larger batch. A bit all over the place platform-wise; OMAP, at91,
marvell, renesas, sunxi, ux500, etc.
I tried to summarize highlights but there isn't a whole lot to point
out. Lots of little things fixed all over. A couple of defconfig
updates due to new/changing options."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
ARM: at91/sama5: fix incorrect PMC pcr div definition
ARM: at91/dt: fix macb pinctrl_macb_rmii_mii_alt definition
ARM: at91: at91sam9n12: move external irq declatation to DT
ARM: shmobile: marzen: Use error values in usb_power_*
ARM: tegra: defconfig fixes
ARM: nomadik: fix IRQ assignment for SMC ethernet
ARM: vt8500: Add missing NULL terminator in dt_compat
clk: tegra: add ac97 controller clock
clk: tegra: remove USB from clk init table
ARM: dts: mvebu: Fix wrong the address reg value for the L2-cache node
ARM: plat-orion: Fix num_resources and id for ge10 and ge11
ARM: OMAP2+: hwmod: Remove sysc slave idle and auto idle apis
SERIAL: OMAP: Remove the slave idle handling from the driver
ARM: OMAP2+: serial: Remove the un-used slave idle hooks
ARM: OMAP2+: hwmod-data: UART IP needs software control to manage sidle modes
ARM: OMAP2+: hwmod: Add a new flag to handle SIDLE in SWSUP only in active
ARM: OMAP2+: hwmod: Fix sidle programming in _enable_sysc()/_idle_sysc()
arm: mvebu: fix the 'ranges' property to handle PCIe
ARM: mvebu: select ARCH_REQUIRE_GPIOLIB for mvebu platform
ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock
...
|
|
From Maxime Ripard:
Small set of fixes for 3.10:
- Fix build breakage in pinctrl driver when no other architecture is selected
- Fix Mini X-plus device tree build
* tag 'sunxi-fixes-for-3.10' of git://github.com/mripard/linux:
ARM: sunxi: select ARCH_REQUIRE_GPIOLIB
ARM: sunxi: Fix Mini X-plus device tree build
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Since commit 1977e6d8 (drm/exynos: change the method for getting the
interrupt) the Exynos DRM FIMD driver requires IRQ resources to be
named. This patch fixes probe failure in non-DT cases by adding
appropriate resource names to fimd0 platform device.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
This patch fixes software reset logic. Software reset applies only to
powered-on domains in SOC because software reset to all domains causes
reboot failure.
Signed-off-by: Jungseok Lee <jays.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
The logic to detect if the irq stack was already in use with
raw_spin_trylock() is wrong, because it will generate a "trylock failure
on UP" error message with CONFIG_SMP=n and CONFIG_DEBUG_SPINLOCK=y.
arch_spin_trylock() can't be used either since in the CONFIG_SMP=n case
no atomic protection is given and we are reentrant here. A mutex didn't
worked either and brings more overhead by turning off interrupts.
So, let's use the fastest path for parisc which is the ldcw instruction.
Counting how often the irq stack was used is pretty useless, so just
drop this piece of code.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This patch extends exynos_init_time() function to handle Exynos4210
rev0 SoC, which differs in availability of system timers and needs
different clocksource initialization.
This makes it possible to use exynos_init_time() function as init_time
callback for all Exynos-based boards, including Universal_C210, which
originally had to use samsung_timer_init().
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
The get_stack_use_cr30 and get_stack_use_r30 macros allocate a stack
frame for external interrupts and interruptions requiring a stack frame.
They are currently not reentrant in that they save register context
before the stack is set or adjusted.
I have observed a number of system crashes where there was clear
evidence of stack corruption during interrupt processing, and as a
result register corruption. Some interruptions can still occur during
interruption processing, however external interrupts are disabled and
data TLB misses don't occur for absolute accesses. So, it's not entirely
clear what triggers this issue. Also, if an interruption occurs when
Q=0, it is generally not possible to recover as the shadowed registers
are not copied.
The attached patch reworks the get_stack_use_cr30 and get_stack_use_r30
macros to allocate stack before doing register saves. The new code is a
couple of instructions shorter than the old implementation. Thus, it's
an improvement even if it doesn't fully resolve the stack corruption
issue. Based on limited testing, it improves SMP system stability.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
/proc/interrupts
Show number of floating point assistant and unaligned access fixup
handler in /proc/interrupts file.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
additionally clean up some whitespaces & tabs.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
From Nicolas Ferre:
- One definition fix that can lead to mis-clock some AT91 peripherals on SAMA5.
- Two DT related fixes.
* tag 'at91-fixes' of git://github.com/at91linux/linux-at91:
ARM: at91/sama5: fix incorrect PMC pcr div definition
ARM: at91/dt: fix macb pinctrl_macb_rmii_mii_alt definition
ARM: at91: at91sam9n12: move external irq declatation to DT
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Currently user faults (page, undefined instruction) are always reported
even though the user may have a signal handler for them. This patch adds
unhandled_signal() check together with printk_ratelimit() for these
cases.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Need 'EXPORT_SYMBOL(clear_page)' if building with allmodconfig.
The related errors:
ERROR: "clear_page" [fs/ocfs2/dlm/ocfs2_dlm.ko] undefined!
ERROR: "clear_page" [fs/ntfs/ntfs.ko] undefined!
ERROR: "clear_page" [fs/gfs2/gfs2.ko] undefined!
ERROR: "clear_page" [fs/fuse/fuse.ko] undefined!
ERROR: "clear_page" [fs/ext3/ext3.ko] undefined!
ERROR: "clear_page" [fs/ext2/ext2.ko] undefined!
ERROR: "clear_page" [fs/exofs/libore.ko] undefined!
ERROR: "clear_page" [fs/exofs/exofs.ko] undefined!
ERROR: "clear_page" [drivers/block/brd.ko] undefined!
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc fixes from Benjamin Herrenschmidt:
"Some more P8 related bits, a bunch of fixes for our P7+/P8 HW crypto
drivers, some added workarounds for those radeons that don't do proper
64-bit MSIs and a couple of other trivialities by myself."
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/pseries: Make 32-bit MSI quirk work on systems lacking firmware support
powerpc/powernv: Build a zImage.epapr
powerpc: Make radeon 32-bit MSI quirk work on powernv
powerpc: Context switch more PMU related SPRs
powerpc/powernv: Fix condition for when to invalidate the TCE cache
powerpc/pci: Fix bogus message at boot about empty memory resources
powerpc: Fix TLB cleanup at boot on POWER8
drivers/crypto/nx: Fixes for multiple races and issues
|
|
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
|
|
The PA24 pin is wrongly assigned to peripheral B.
In the current config there is 2 ETX3 pins (PA11 and PA24) and
no ETXER pin (PA22).
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: stable <stable@vger.kernel.org> # 3.8+
|
|
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
|
|
Recent commit e61133dda480062d221f09e4fc18f66763f8ecd0 added support
for a new firmware feature to force an adapter to use 32 bit MSIs.
However, this firmware is not available for all systems. The hack below
allows devices needing 32 bit MSIs to work on these systems as well.
It is careful to only enable this on Gen2 slots, which should limit
this to configurations where this hack is needed and tested to work.
[Small change to factor out the hack into a separate function -- BenH]
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
The zImage.epapr wrapper allows to use zImages when booting via a flat
device-tree which can be used on powernv.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
This moves the quirk itself to pci_64.c as to get built on all ppc64
platforms (the only ones with a pci_dn), factors the two implementations
of get_pdn() into a single pci_get_dn() and use the quirk to do 32-bit
MSIs on IODA based powernv platforms.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
