aboutsummaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)Author
2013-08-28Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-08-28Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2013-08-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/pcie/trans.c net/mac80211/ibss.c
2013-08-26mac80211: fix change_interface queue assignmentsJohannes Berg
Jouni reported that with mac80211_hwsim, multicast TX was causing crashes due to invalid vif->cab_queue assignment. It turns out that this is caused by change_interface() getting invoked and not having the vif->type/vif->p2p assigned correctly before calling the queue check (ieee80211_check_queues). Fix this by passing the 'external' interface type to the function and adjusting it accordingly. While at it, also fix the error path in change_interface, it wasn't correctly resetting to the external type but using the internal one instead. Fortunately this affects on hwsim because all other drivers set the vif->type/vif->p2p variables when changing iftype. This shouldn't be needed, but almost all implementations actually do it for their own internal handling. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-23mac80211: ignore (E)CSA in probe response framesJohannes Berg
Seth reports that some APs, notably the Netgear WNDAP360, send invalid ECSA IEs in probe response frames with the operating class and channel number both set to zero, even when no channel switch is being done. As a result, any scan while connected to such an AP results in the connection being dropped. Fix this by ignoring any channel switch announcment in probe response frames entirely, since we're connected to the AP we will be receiving a beacon (and maybe even an action frame) if a channel switch is done, which is sufficient. Cc: stable@vger.kernel.org # 3.10 Reported-by: Seth Forshee <seth.forshee@canonical.com> Tested-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-23cfg80211: add flags to cfg80211_rx_mgmt()Vladimir Kondratiev
Add flags intended to report various auxiliary information and introduce the NL80211_RXMGMT_FLAG_ANSWERED flag to report that the frame was already answered by the device. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> [REPLIED->ANSWERED, reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-23mac80211: assign seqnums for group QoS framesBob Copeland
According to 802.11-2012 9.3.2.10, paragraph 4, QoS data frames with a group address in the Address 1 field have sequence numbers allocated from the same counter as non-QoS data and management frames. Without this flag, some drivers may not assign sequence numbers, and in rare cases frames might get dropped. Set the control flag accordingly. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-23mac80211: only respond to probe request with mesh IDChun-Yeow Yeoh
Previously, the mesh STA responds to probe request from legacy STA but now it will only respond to legacy STA if the legacy STA does include the specific mesh ID or wildcard mesh ID in the probe request. The iw patch "iw: scan using meshid" can be used either by legacy STA or by mesh STA to do active scanning by inserting the mesh ID in the probe request frame. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Acked-by: Thomas Pedersen <thomas@cozybit.com> Acked-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-23mac80211: move setting WIPHY_FLAG_SUPPORTS_SCHED_SCAN into driversJohannes Berg
mac80211 currently sets WIPHY_FLAG_SUPPORTS_SCHED_SCAN based on whether the start_sched_scan operation is supported or not, but that will not be correct for all drivers, we're adding scheduled scan to the iwlmvm driver but it depends on firmware support. Therefore, move setting WIPHY_FLAG_SUPPORTS_SCHED_SCAN into the drivers so that they can control it regardless of implementing the operation. This currently only affects the TI drivers since they're the only ones implementing scheduled scan (in a mac80211 driver.) Acked-by: Luciano Coelho <luca@coelho.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-22mac80211: minstrel_ht: don't use control.flags in TX status pathJohannes Berg
Sujith reports that my commit af61a165187bb94b1dc7628ef815c23d0eacf40b ("mac80211: add control port protocol TX control flag") broke ath9k (aggregation). The reason is that I made minstrel_ht use the flag in the TX status path, where it can have been overwritten by the driver. Since we have no more space in info->flags, revert that part of the change for now, until we can reshuffle the flags or so. Reported-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-21mac80211: ibss: fix ignored channel parameterSimon Wunderlich
my earlier patch "mac80211: change IBSS channel state to chandef" created a regression by ignoring the channel parameter in __ieee80211_sta_join_ibss, which breaks IBSS channel selection. This patch fixes this situation by using the right channel and adopting the selected bandwidth mode. Cc: stable@vger.kernel.org Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-21mac80211: add a flag to indicate CCK support for HT clientsFelix Fietkau
brcm80211 cannot handle sending frames with CCK rates as part of an A-MPDU session. Other drivers may have issues too. Set the flag in all drivers that have been tested with CCK rates. This fixes a reported brcmsmac regression introduced in commit ef47a5e4f1aaf1d0e2e6875e34b2c9595897bef6 "mac80211/minstrel_ht: fix cck rate sampling" Cc: stable@vger.kernel.org # 3.10 Reported-by: Tom Gundersen <teg@jklm.no> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-21mac80211: add missing channel context releaseJohannes Berg
IBSS needs to release the channel context when leaving but I evidently missed that. Fix it. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-16Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-08-16mac80211: add APIs to allow keeping connections after WoWLANJohannes Berg
In order to be able to (securely) keep connections alive after the system was suspended for WoWLAN, we need some additional APIs. We already have API (ieee80211_gtk_rekey_notify) to tell wpa_supplicant about the new replay counter if GTK rekeying was done by the device while the host was asleep, but that's not sufficient. If GTK rekeying wasn't done, we need to tell the host about sequence counters for the GTK (and PTK regardless of rekeying) that was used while asleep, add ieee80211_set_key_rx_seq() for that. If GTK rekeying was done, then we need to be able to disable the old keys (with ieee80211_remove_key()) and allocate the new GTK key(s) in mac80211 (with ieee80211_gtk_rekey_add()). If protocol offload (e.g. ARP) is implemented, then also the TX sequence counter for the PTK must be updated, using the new ieee80211_set_key_tx_seq() function. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-16mac80211: move ibss presp generation in own functionSimon Wunderlich
Channel Switch will later require to generate beacons without setting them immediately. Therefore split the presp generation in an own function. Splitting the original very long function might be a good idea anyway. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-16mac80211: perform power save processing before decryptionJohan Almbladh
This patch decouples the power save processing from the frame decryption by running the decrypt rx handler after sta_process. In the case where the decryption failed for some reason, the stack used to not process the PM and MOREDATA bits for that frame. The stack now always performs power save processing regardless of the decryption result. That means that encrypted data frames and NULLFUNC frames are now handled in the same way regarding power save processing, making the stack more robust. Signed-off-by: Johan Almbladh <ja@anyfi.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-12mac80211: ibss - do not scan if not needed when creating an IBSSAntonio Quartulli
In some cases mac80211 will scan before creating an IBSS even if bssid and frequency have been forced by the user. This is not needed and leads only to a delay in the IBSS establishment phase. Immediately create the cell if both bssid and frequency (and fixed_freq is set) have been specified. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-12mac80211: add vif to testmode cmdDavid Spinadel
Pass the wdev from cfg80211 on to the driver as the vif if given and it's valid for the driver. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-12cfg80211: add wdev to testmode cmdDavid Spinadel
To allow drivers to implement per-interface testmode operations more easily, pass a wdev pointer if any identification for one was given from userspace. Clean up the code a bit while at it. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-12mac80211: add control port protocol TX control flagJohannes Berg
A lot of drivers check the frame protocol for ETH_P_PAE, for various reasons (like making those more reliable). Add a new flags bitmap to the TX control info and a new flag indicating the control port protocol is in use to let all drivers also apply such logic to other control port protocols, should they be configured. Also use the new flag in the iwlwifi drivers. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-09Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-08-09Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2013-08-09mac80211: fix ieee80211_sta_process_chanswitch for 5/10 MHz channelsSimon Wunderlich
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-09mac80211: allow lowest basic rate for unicast management for meshChun-Yeow Yeoh
Allow lowest basic rate to be used for unicast management frame in mesh. Otherwise, the lowest supported rate is used for unicast management frame, such as 1Mbps for 2.4GHz and 6Mbps for 5GHz. Rename the rc_send_low_broadcast to re_send_low_basicrate since now it is also applied to unicast management frame in mesh. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-06wireless: make TU conversion macros availableJohannes Berg
A few places in the code (mac80211 and iwlmvm) use the same TU_TO_JIFFIES() macro and could use TU_TO_EXP_TIME() that mac80211 has. Make these available to everyone and use them. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-01Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-08-01mac80211: add channel switch command and beacon callbacksSimon Wunderlich
The count field in CSA must be decremented with each beacon transmitted. This patch implements the functionality for drivers using ieee80211_beacon_get(). Other drivers must call back manually after reaching count == 0. This patch also contains the handling and finish worker for the channel switch command, and mac80211/chanctx code to allow to change a channel definition of an active channel context. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> [small cleanups, catch identical chandef] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-01mac80211: add debugfs for driver-buffered TID bitmapJohannes Berg
Add a per-station debugfs file indicating the TIDs (as a bitmap) that the driver has data buffered on. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-01mac80211: report some VHT radiotap infos for tx statusKarl Beldan
The radiotap VHT info is 12 bytes (required to be aligned on 2) : u16 known - IEEE80211_RADIOTAP_VHT_KNOWN_* u8 flags - IEEE80211_RADIOTAP_VHT_FLAG_* u8 bandwidth u8 mcs_nss[4] u8 coding u8 group_id u16 partial_aid ATM mac80211 can handle IEEE80211_RADIOTAP_VHT_KNOWN_{GI,BANDWIDTH} and mcs_nss[0] (i.e single user) in simple cases. This is more a placeholder to let sniffers give more clues for VHT, since we don't have yet the proper infrastructure/conventions in mac80211 for complete feedback (e.g consider dynamic BW). Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-01mac80211: ibss - remove not authorized station earlierAntonio Quartulli
A station which is not authorized has to be purged earlier to give it a chance to re-try to establish an IBSS/RSN session soon. Set the timeout to 10 seconds. Some refactoring has also been done to allow the IBSS submodule to have its own expiring function. Reported-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-01mac80211: use oneshot blink API for LED triggersFabio Baltieri
Change mac80211 LED trigger code to use the generic led_trigger_blink_oneshot() API for transmit and receive activity indication. This gives a better feedback to the user, as with the new API each activity event results in a visible blink, while a constant traffic results in a continuous blink at constant rate. Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> [fix LED disabled build error] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-31mac80211: continue using disabled channels while connectedJohannes Berg
In case the AP has different regulatory information than we do, it can happen that we connect to an AP based on e.g. the world roaming regulatory data, and then update our database with the AP's country information disables the channel the AP is using. If this happens on an HT AP, the bandwidth tracking code will hit the WARN_ON() and disconnect. Since that's not very useful, ignore the channel-disable flag in bandwidth tracking. Cc: stable@vger.kernel.org Reported-by: Chris Wright <chrisw@sous-sol.org> Tested-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-31mac80211: ignore HT primary channel while connectedJohannes Berg
While we're connected, the AP shouldn't change the primary channel in the HT information. We checked this, and dropped the connection if it did change it. Unfortunately, this is causing problems on some APs, e.g. on the Netgear WRT610NL: the beacons seem to always contain a bad channel and if we made a connection using a probe response (correct data) we drop the connection immediately and can basically not connect properly at all. Work around this by ignoring the HT primary channel information in beacons if we're already connected. Also print out more verbose messages in the other situations to help diagnose similar bugs quicker in the future. Cc: stable@vger.kernel.org [3.10] Acked-by: Andy Isaacson <adi@hexapodia.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-31mac80211: don't wait for TX status foreverJohannes Berg
TX status notification can get lost, or the frames could get stuck on the queue, so don't wait for the callback from the driver forever and instead time out after half a second. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-31mac80211: fix infinite loop in ieee80211_determine_chantypeChris Wright
Commit "3d9646d mac80211: fix channel selection bug" introduced a possible infinite loop by moving the out target above the chandef_downgrade while loop. When we downgrade to NL80211_CHAN_WIDTH_20_NOHT, we jump back up to re-run the while loop...indefinitely. Replace goto with break and carry on. This may not be sufficient to connect to the AP, but will at least keep the cpu from livelocking. Thanks to Derek Atkins as an extra pair of debugging eyes. Cc: stable@kernel.org Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-23mac80211: fix monitor interface suspend crash regressionStanislaw Gruszka
My commit: commit 12e7f517029dad819c45eca9ca01fdb9ba57616b Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Thu Feb 28 10:55:26 2013 +0100 mac80211: cleanup generic suspend/resume procedures removed check for deleting MONITOR and AP_VLAN when suspend. That can cause a crash (i.e. in iwlagn_mac_remove_interface()) since we remove interface in the driver that we did not add before. Reference: http://marc.info/?l=linux-kernel&m=137391815113860&w=2 Bisected-by: Ortwin Glück <odi@odi.ch> Reported-and-tested-by: Ortwin Glück <odi@odi.ch> Cc: stable@vger.kernel.org # 3.10 Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-22mac80211: prevent the buffering or frame transmission to non-assoc mesh STAChun-Yeow Yeoh
This patch is intended to avoid the buffering to non-assoc mesh STA and also to avoid the triggering of frame to non-assoc mesh STA which could cause kernel panic in specific hw. One of the examples, is kernel panic happens to ath9k if user space inserts the mesh STA and not proceed with the SAE and AMPE, and later the same mesh STA is detected again. The sta_state of the mesh STA remains at IEEE80211_STA_NONE and if the ieee80211_sta_ps_deliver_wakeup is called and subsequently the ath_tx_aggr_wakeup, the kernel panic due to ath_tx_node_init is not called before to initialize the require data structures. This issue is reported by Cedric Voncken before. http://www.spinics.net/lists/linux-wireless/msg106342.html [<831ea6b4>] ath_tx_aggr_wakeup+0x44/0xcc [ath9k] [<83084214>] ieee80211_sta_ps_deliver_wakeup+0xb8/0x208 [mac80211] [<830b9824>] ieee80211_mps_sta_status_update+0x94/0x108 [mac80211] [<83099398>] ieee80211_sta_ps_transition+0xc94/0x34d8 [mac80211] [<8022399c>] nf_iterate+0x98/0x104 [<8309bb60>] ieee80211_sta_ps_transition+0x345c/0x34d8 [mac80211] Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16mac80211/minstrel: fix NULL pointer dereference issueFelix Fietkau
When priv_sta == NULL, mi->prev_sample is dereferenced too early. Move the assignment further down, after the rate_control_send_low call. Reported-by: Krzysztof Mazur <krzysiek@podlesie.net> Cc: stable@vger.kernel.org # 3.10 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16mac80211: make active monitor injection work w/ HW queueJohannes Berg
When a driver (like hwsim) uses HW queue control an active monitor vif needs to be used for the queues, make the code do that. Otherwise we'd bail out and drop the frames. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16mac80211: set forwarding in mesh capability infoChun-Yeow Yeoh
Set the Forwarding bit in Mesh Capability Info according to dot11MeshForwarding as defined in IEEE 802.11-2012 section 8.4.2.100.8. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16mac80211: fix off-by-one regression in ibss beacon generationSimon Wunderlich
There is an off-by-one error in the beacon generation for the ibss mode, falsely a rate the extended supported rates which was already added to supported rates, messing up the beacon. This was introduced by commit "mac80211: select and adjust bitrates according to channel mode". Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16mac80211: fix regression when initializing ibss wmm paramsSimon Wunderlich
There appear to be two regressions in ibss.c when calling ieee80211_sta_def_wmm_params(): * the second argument should be a rate length, not a rate array. This was introduced by my commit "mac80211: select and adjust bitrates according to channel mode" * the third argument is not initialized (anymore), making further checks within this function useless. Since ieee80211_sta_def_wmm_params() is only used by ibss anyway, remove the function entirely and handle the operating mode decision immediately. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16mac80211: return if IBSS chandef can not be usedSimon Wunderlich
This was originally designed to fail when a 40+/40- mode can not be used, but basic modes (such as 5/10/20 MHz) must be handled with an error. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16mac80211: allow scanning for 5/10 MHz channels in IBSSSimon Wunderlich
Use a chandef instead of just the channel for scanning, and enable 5/10 Mhz scanning for IBSS mode. Also reporting is changed to the new inform_bss functions. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16cfg80211/mac80211: use reduced txpower for 5 and 10 MHzSimon Wunderlich
Some regulations (like germany, but also FCC) express their transmission power limit in dBm/MHz or mW/MHz. To cope with that and be on the safe side, reduce the maximum power to half (10 MHz) or quarter (5 MHz) when operating on these reduced bandwidth channels. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16cfg80211/mac80211: get mandatory rates based on scan widthSimon Wunderlich
Mandatory rates for 5 and 10 MHz are different from the rates used for 20 MHz in 2.4 GHz mode, as they use OFDM only. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16mac80211: select and adjust bitrates according to channel modeSimon Wunderlich
The various components accessing the bitrates table must use consider the used channel bandwidth to select only available rates or calculate the bitrate correctly. There are some rates in reduced bandwidth modes which can't be represented as multiples of 500kbps, like 2.25 MBit/s in 5 MHz mode. The standard suggests to round up to the next multiple of 500kbps, just do that in mac80211 as well. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> [make rate unsigned in ieee80211_add_tx_radiotap_header(), squash fix] Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16mac80211: add radiotap flag and handling for 5/10 MHzSimon Wunderlich
Wireshark already defines radiotap channel flags for 5 and 10 MHz, so just use them in Linux radiotap too. Furthermore, add rx status flags to allow drivers to report when they received data on 5 or 10 MHz channels. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16mac80211: fix timing for 5 MHz and 10 MHz channelsSimon Wunderlich
according to IEEE 802.11-2012 section 18, various timings change when using 5 MHz and 10 MHz. Reflect this by using a "shift" when calculating durations. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>