From 0344e6166bbf90ad3fe05497ffe754bd65f9e7ac Mon Sep 17 00:00:00 2001 From: Enrico Weigelt Date: Mon, 15 Jul 2019 16:57:28 +0200 Subject: leds: apu: drop superseeded apu2/3 led support This driver only supports gpio-attached LEDs on apu1/2/3 boards, but neither gpio's themselves, nor other gpio-attached devices (eg. front button). For apu2+ a newer, more complete driver exists, based on a generic driver for the AMD SOCs gpio-controller, supporting LEDs as well other devices. Therefore these boards don't need legacy support from this driver anymore. Both drivers claim the same device, so only one driver may exist in a system, putting distros in the position to decide between either apu2+ keys or apu1 led support. Therefore drop the apu2+ led support from the old driver, solve the conflict and reduce unnecessary code. Signed-off-by: Enrico Weigelt Acked-by: Pavel Machek Signed-off-by: Jacek Anaszewski --- drivers/leds/leds-apu.c | 124 +++--------------------------------------------- 1 file changed, 6 insertions(+), 118 deletions(-) (limited to 'drivers/leds/leds-apu.c') diff --git a/drivers/leds/leds-apu.c b/drivers/leds/leds-apu.c index 8d42e46e2de3..140093a0494d 100644 --- a/drivers/leds/leds-apu.c +++ b/drivers/leds/leds-apu.c @@ -47,12 +47,6 @@ #define APU1_NUM_GPIO 3 #define APU1_IOSIZE sizeof(u8) -#define APU2_FCH_ACPI_MMIO_BASE 0xFED80000 -#define APU2_FCH_GPIO_BASE (APU2_FCH_ACPI_MMIO_BASE + 0x1500) -#define APU2_GPIO_BIT_WRITE 22 -#define APU2_APU2_NUM_GPIO 4 -#define APU2_IOSIZE sizeof(u32) - /* LED access parameters */ struct apu_param { void __iomem *addr; /* for ioread/iowrite */ @@ -75,7 +69,6 @@ struct apu_led_profile { /* Supported platform types */ enum apu_led_platform_types { APU1_LED_PLATFORM, - APU2_LED_PLATFORM, }; struct apu_led_pdata { @@ -96,19 +89,6 @@ static const struct apu_led_profile apu1_led_profile[] = { { "apu:green:3", LED_OFF, APU1_FCH_GPIO_BASE + 2 * APU1_IOSIZE }, }; -static const struct apu_led_profile apu2_led_profile[] = { - { "apu2:green:1", LED_ON, APU2_FCH_GPIO_BASE + 68 * APU2_IOSIZE }, - { "apu2:green:2", LED_OFF, APU2_FCH_GPIO_BASE + 69 * APU2_IOSIZE }, - { "apu2:green:3", LED_OFF, APU2_FCH_GPIO_BASE + 70 * APU2_IOSIZE }, -}; - -/* Same as apu2_led_profile, but with "3" in the LED names. */ -static const struct apu_led_profile apu3_led_profile[] = { - { "apu3:green:1", LED_ON, APU2_FCH_GPIO_BASE + 68 * APU2_IOSIZE }, - { "apu3:green:2", LED_OFF, APU2_FCH_GPIO_BASE + 69 * APU2_IOSIZE }, - { "apu3:green:3", LED_OFF, APU2_FCH_GPIO_BASE + 70 * APU2_IOSIZE }, -}; - static const struct dmi_system_id apu_led_dmi_table[] __initconst = { { .ident = "apu", @@ -117,54 +97,6 @@ static const struct dmi_system_id apu_led_dmi_table[] __initconst = { DMI_MATCH(DMI_PRODUCT_NAME, "APU") } }, - /* PC Engines APU2 with "Legacy" bios < 4.0.8 */ - { - .ident = "apu2", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), - DMI_MATCH(DMI_BOARD_NAME, "APU2") - } - }, - /* PC Engines APU2 with "Legacy" bios >= 4.0.8 */ - { - .ident = "apu2", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), - DMI_MATCH(DMI_BOARD_NAME, "apu2") - } - }, - /* PC Engines APU2 with "Mainline" bios */ - { - .ident = "apu2", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), - DMI_MATCH(DMI_BOARD_NAME, "PC Engines apu2") - } - }, - /* PC Engines APU3 with "Legacy" bios < 4.0.8 */ - { - .ident = "apu3", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), - DMI_MATCH(DMI_BOARD_NAME, "APU3") - } - }, - /* PC Engines APU3 with "Legacy" bios >= 4.0.8 */ - { - .ident = "apu3", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), - DMI_MATCH(DMI_BOARD_NAME, "apu3") - } - }, - /* PC Engines APU2 with "Mainline" bios */ - { - .ident = "apu3", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), - DMI_MATCH(DMI_BOARD_NAME, "PC Engines apu3") - } - }, {} }; MODULE_DEVICE_TABLE(dmi, apu_led_dmi_table); @@ -178,25 +110,6 @@ static void apu1_led_brightness_set(struct led_classdev *led, enum led_brightnes spin_unlock(&apu_led->lock); } -static void apu2_led_brightness_set(struct led_classdev *led, enum led_brightness value) -{ - struct apu_led_priv *pled = cdev_to_priv(led); - u32 value_new; - - spin_lock(&apu_led->lock); - - value_new = ioread32(pled->param.addr); - - if (value) - value_new &= ~BIT(APU2_GPIO_BIT_WRITE); - else - value_new |= BIT(APU2_GPIO_BIT_WRITE); - - iowrite32(value_new, pled->param.addr); - - spin_unlock(&apu_led->lock); -} - static int apu_led_config(struct device *dev, struct apu_led_pdata *apuld) { int i; @@ -219,8 +132,6 @@ static int apu_led_config(struct device *dev, struct apu_led_pdata *apuld) led_cdev->flags = LED_CORE_SUSPENDRESUME; if (apu_led->platform == APU1_LED_PLATFORM) led_cdev->brightness_set = apu1_led_brightness_set; - else if (apu_led->platform == APU2_LED_PLATFORM) - led_cdev->brightness_set = apu2_led_brightness_set; pled->param.addr = devm_ioremap(dev, apu_led->profile[i].offset, apu_led->iosize); @@ -254,27 +165,10 @@ static int __init apu_led_probe(struct platform_device *pdev) apu_led->pdev = pdev; - if (dmi_match(DMI_PRODUCT_NAME, "APU")) { - apu_led->profile = apu1_led_profile; - apu_led->platform = APU1_LED_PLATFORM; - apu_led->num_led_instances = ARRAY_SIZE(apu1_led_profile); - apu_led->iosize = APU1_IOSIZE; - } else if (dmi_match(DMI_BOARD_NAME, "APU2") || - dmi_match(DMI_BOARD_NAME, "apu2") || - dmi_match(DMI_BOARD_NAME, "PC Engines apu2")) { - apu_led->profile = apu2_led_profile; - apu_led->platform = APU2_LED_PLATFORM; - apu_led->num_led_instances = ARRAY_SIZE(apu2_led_profile); - apu_led->iosize = APU2_IOSIZE; - } else if (dmi_match(DMI_BOARD_NAME, "APU3") || - dmi_match(DMI_BOARD_NAME, "apu3") || - dmi_match(DMI_BOARD_NAME, "PC Engines apu3")) { - apu_led->profile = apu3_led_profile; - /* Otherwise identical to APU2. */ - apu_led->platform = APU2_LED_PLATFORM; - apu_led->num_led_instances = ARRAY_SIZE(apu3_led_profile); - apu_led->iosize = APU2_IOSIZE; - } + apu_led->profile = apu1_led_profile; + apu_led->platform = APU1_LED_PLATFORM; + apu_led->num_led_instances = ARRAY_SIZE(apu1_led_profile); + apu_led->iosize = APU1_IOSIZE; spin_lock_init(&apu_led->lock); return apu_led_config(&pdev->dev, apu_led); @@ -295,13 +189,7 @@ static int __init apu_led_init(void) pr_err("No PC Engines board detected\n"); return -ENODEV; } - if (!(dmi_match(DMI_PRODUCT_NAME, "APU") || - dmi_match(DMI_PRODUCT_NAME, "APU2") || - dmi_match(DMI_PRODUCT_NAME, "apu2") || - dmi_match(DMI_PRODUCT_NAME, "PC Engines apu2") || - dmi_match(DMI_PRODUCT_NAME, "APU3") || - dmi_match(DMI_PRODUCT_NAME, "apu3") || - dmi_match(DMI_PRODUCT_NAME, "PC Engines apu3"))) { + if (!(dmi_match(DMI_PRODUCT_NAME, "APU"))) { pr_err("Unknown PC Engines board: %s\n", dmi_get_system_info(DMI_PRODUCT_NAME)); return -ENODEV; @@ -337,6 +225,6 @@ module_init(apu_led_init); module_exit(apu_led_exit); MODULE_AUTHOR("Alan Mizrahi"); -MODULE_DESCRIPTION("PC Engines APU family LED driver"); +MODULE_DESCRIPTION("PC Engines APU1 front LED driver"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:leds_apu"); -- cgit v1.2.3