From 395cf9691d72173d8cdaa613c5f0255f993af94b Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 15 Aug 2011 02:02:26 +0200 Subject: doc: fix broken references There are numerous broken references to Documentation files (in other Documentation files, in comments, etc.). These broken references are caused by typo's in the references, and by renames or removals of the Documentation files. Some broken references are simply odd. Fix these broken references, sometimes by dropping the irrelevant text they were part of. Signed-off-by: Paul Bolle Signed-off-by: Jiri Kosina --- Documentation/PCI/pci.txt | 2 +- Documentation/blackfin/bfin-gpio-notes.txt | 2 +- Documentation/block/biodoc.txt | 2 +- Documentation/bus-virt-phys-mapping.txt | 2 +- Documentation/cdrom/packet-writing.txt | 2 +- Documentation/development-process/4.Coding | 2 +- Documentation/devicetree/bindings/gpio/led.txt | 2 +- Documentation/filesystems/caching/object.txt | 6 +++--- Documentation/filesystems/locks.txt | 11 ++++++----- Documentation/filesystems/nfs/idmapper.txt | 2 +- Documentation/filesystems/pohmelfs/design_notes.txt | 5 +++-- Documentation/filesystems/proc.txt | 2 +- Documentation/filesystems/vfs.txt | 3 --- Documentation/frv/booting.txt | 6 ------ Documentation/input/input.txt | 2 +- Documentation/kernel-docs.txt | 4 ++-- Documentation/kernel-parameters.txt | 12 ++++++------ Documentation/laptops/thinkpad-acpi.txt | 4 ++-- Documentation/media-framework.txt | 4 ++-- Documentation/memory-barriers.txt | 2 +- Documentation/networking/scaling.txt | 2 +- Documentation/power/basic-pm-debugging.txt | 2 +- Documentation/power/userland-swsusp.txt | 3 ++- Documentation/rfkill.txt | 3 +-- Documentation/scsi/aic7xxx_old.txt | 2 +- Documentation/scsi/scsi_mid_low_api.txt | 5 ----- Documentation/security/keys-trusted-encrypted.txt | 3 ++- Documentation/sound/oss/PAS16 | 3 +-- Documentation/spi/pxa2xx | 4 ++-- Documentation/timers/highres.txt | 2 +- Documentation/usb/dma.txt | 6 +++--- Documentation/virtual/lguest/lguest.c | 2 +- Documentation/vm/numa | 4 ++-- Documentation/vm/slub.txt | 2 +- arch/alpha/kernel/srm_env.c | 5 ++--- arch/arm/Kconfig | 2 +- arch/arm/include/asm/io.h | 2 +- arch/arm/mach-pxa/xcep.c | 3 +-- arch/ia64/hp/common/sba_iommu.c | 12 ++++++------ arch/m68k/q40/README | 2 +- arch/microblaze/include/asm/dma-mapping.h | 2 +- arch/mips/include/asm/lasat/lasat.h | 6 ++---- arch/mn10300/Kconfig | 2 +- arch/mn10300/kernel/irq.c | 1 - arch/openrisc/Kconfig | 2 +- arch/openrisc/include/asm/dma-mapping.h | 2 +- arch/parisc/include/asm/dma-mapping.h | 2 +- arch/parisc/kernel/pci-dma.c | 2 +- arch/powerpc/include/asm/qe.h | 2 +- arch/powerpc/sysdev/qe_lib/qe.c | 2 +- arch/unicore32/include/asm/io.h | 2 +- arch/x86/Kconfig | 2 +- arch/x86/Kconfig.debug | 2 +- arch/x86/boot/header.S | 2 +- arch/x86/include/asm/dma-mapping.h | 2 +- arch/x86/kernel/amd_gart_64.c | 2 +- arch/x86/kernel/apm_32.c | 2 -- arch/x86/kernel/pci-dma.c | 4 ++-- drivers/char/apm-emulation.c | 5 +---- drivers/input/misc/rotary_encoder.c | 2 +- drivers/leds/Kconfig | 2 +- drivers/media/dvb/dvb-usb/af9005-remote.c | 2 +- drivers/media/dvb/dvb-usb/af9005.c | 2 +- drivers/media/dvb/frontends/dib3000.h | 2 +- drivers/media/dvb/frontends/dib3000mb.c | 2 +- drivers/mtd/Kconfig | 2 +- drivers/net/Kconfig | 3 +-- drivers/net/can/sja1000/sja1000_of_platform.c | 2 +- drivers/net/tulip/21142.c | 3 --- drivers/net/tulip/eeprom.c | 2 -- drivers/net/tulip/interrupt.c | 3 --- drivers/net/tulip/media.c | 3 --- drivers/net/tulip/pnic.c | 3 --- drivers/net/tulip/pnic2.c | 3 --- drivers/net/tulip/timer.c | 3 --- drivers/net/tulip/tulip.h | 3 --- drivers/net/tulip/tulip_core.c | 3 --- drivers/parisc/sba_iommu.c | 16 ++++++++-------- drivers/platform/x86/Kconfig | 5 +---- drivers/scsi/megaraid/megaraid_mbox.c | 2 +- drivers/staging/cxt1e1/Kconfig | 3 +-- drivers/usb/serial/digi_acceleport.c | 2 +- drivers/video/igafb.c | 2 +- drivers/watchdog/smsc37b787_wdt.c | 2 +- fs/configfs/inode.c | 3 ++- fs/configfs/item.c | 2 +- fs/locks.c | 2 +- fs/squashfs/Kconfig | 6 +++--- include/linux/io-mapping.h | 2 +- include/linux/isdn.h | 2 +- include/linux/platform_data/ntc_thermistor.h | 2 +- include/media/videobuf-dma-sg.h | 2 +- include/target/configfs_macros.h | 4 ++-- net/netfilter/Kconfig | 2 +- sound/oss/Kconfig | 4 +--- tools/perf/util/config.c | 4 ++-- 96 files changed, 125 insertions(+), 179 deletions(-) diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt index 6148d4080f88..aa09e5476bba 100644 --- a/Documentation/PCI/pci.txt +++ b/Documentation/PCI/pci.txt @@ -314,7 +314,7 @@ from the PCI device config space. Use the values in the pci_dev structure as the PCI "bus address" might have been remapped to a "host physical" address by the arch/chip-set specific kernel support. -See Documentation/IO-mapping.txt for how to access device registers +See Documentation/io-mapping.txt for how to access device registers or device memory. The device driver needs to call pci_request_region() to verify diff --git a/Documentation/blackfin/bfin-gpio-notes.txt b/Documentation/blackfin/bfin-gpio-notes.txt index f731c1e56475..d36b01f778b9 100644 --- a/Documentation/blackfin/bfin-gpio-notes.txt +++ b/Documentation/blackfin/bfin-gpio-notes.txt @@ -1,5 +1,5 @@ /* - * File: Documentation/blackfin/bfin-gpio-note.txt + * File: Documentation/blackfin/bfin-gpio-notes.txt * Based on: * Author: * diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index c6d84cfd2f56..e418dc0a7086 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -186,7 +186,7 @@ a virtual address mapping (unlike the earlier scheme of virtual address do not have a corresponding kernel virtual address space mapping) and low-memory pages. -Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion +Note: Please refer to Documentation/DMA-API-HOWTO.txt for a discussion on PCI high mem DMA aspects and mapping of scatter gather lists, and support for 64 bit PCI. diff --git a/Documentation/bus-virt-phys-mapping.txt b/Documentation/bus-virt-phys-mapping.txt index 1b5aa10df845..2bc55ff3b4d1 100644 --- a/Documentation/bus-virt-phys-mapping.txt +++ b/Documentation/bus-virt-phys-mapping.txt @@ -1,6 +1,6 @@ [ NOTE: The virt_to_bus() and bus_to_virt() functions have been superseded by the functionality provided by the PCI DMA interface - (see Documentation/PCI/PCI-DMA-mapping.txt). They continue + (see Documentation/DMA-API-HOWTO.txt). They continue to be documented below for historical purposes, but new code must not use them. --davidm 00/12/12 ] diff --git a/Documentation/cdrom/packet-writing.txt b/Documentation/cdrom/packet-writing.txt index 13c251d5add6..2834170d821e 100644 --- a/Documentation/cdrom/packet-writing.txt +++ b/Documentation/cdrom/packet-writing.txt @@ -109,7 +109,7 @@ this interface. (see http://tom.ist-im-web.de/download/pktcdvd ) For a description of the sysfs interface look into the file: - Documentation/ABI/testing/sysfs-block-pktcdvd + Documentation/ABI/testing/sysfs-class-pktcdvd Using the pktcdvd debugfs interface diff --git a/Documentation/development-process/4.Coding b/Documentation/development-process/4.Coding index 83f5f5b365a3..e3cb6a56653a 100644 --- a/Documentation/development-process/4.Coding +++ b/Documentation/development-process/4.Coding @@ -278,7 +278,7 @@ enabled, a configurable percentage of memory allocations will be made to fail; these failures can be restricted to a specific range of code. Running with fault injection enabled allows the programmer to see how the code responds when things go badly. See -Documentation/fault-injection/fault-injection.text for more information on +Documentation/fault-injection/fault-injection.txt for more information on how to use this facility. Other kinds of errors can be found with the "sparse" static analysis tool. diff --git a/Documentation/devicetree/bindings/gpio/led.txt b/Documentation/devicetree/bindings/gpio/led.txt index 064db928c3c1..141087cf3107 100644 --- a/Documentation/devicetree/bindings/gpio/led.txt +++ b/Documentation/devicetree/bindings/gpio/led.txt @@ -8,7 +8,7 @@ node's name represents the name of the corresponding LED. LED sub-node properties: - gpios : Should specify the LED's GPIO, see "Specifying GPIO information - for devices" in Documentation/powerpc/booting-without-of.txt. Active + for devices" in Documentation/devicetree/booting-without-of.txt. Active low LEDs should be indicated using flags in the GPIO specifier. - label : (optional) The label for this LED. If omitted, the label is taken from the node name (excluding the unit address). diff --git a/Documentation/filesystems/caching/object.txt b/Documentation/filesystems/caching/object.txt index e8b0a35d8fe5..58313348da87 100644 --- a/Documentation/filesystems/caching/object.txt +++ b/Documentation/filesystems/caching/object.txt @@ -127,9 +127,9 @@ fscache_enqueue_object()). PROVISION OF CPU TIME --------------------- -The work to be done by the various states is given CPU time by the threads of -the slow work facility (see Documentation/slow-work.txt). This is used in -preference to the workqueue facility because: +The work to be done by the various states was given CPU time by the threads of +the slow work facility. This was used in preference to the workqueue facility +because: (1) Threads may be completely occupied for very long periods of time by a particular work item. These state actions may be doing sequences of diff --git a/Documentation/filesystems/locks.txt b/Documentation/filesystems/locks.txt index fab857accbd6..2cf81082581d 100644 --- a/Documentation/filesystems/locks.txt +++ b/Documentation/filesystems/locks.txt @@ -53,11 +53,12 @@ fcntl(), with all the problems that implies. 1.3 Mandatory Locking As A Mount Option --------------------------------------- -Mandatory locking, as described in 'Documentation/filesystems/mandatory.txt' -was prior to this release a general configuration option that was valid for -all mounted filesystems. This had a number of inherent dangers, not the -least of which was the ability to freeze an NFS server by asking it to read -a file for which a mandatory lock existed. +Mandatory locking, as described in +'Documentation/filesystems/mandatory-locking.txt' was prior to this release a +general configuration option that was valid for all mounted filesystems. This +had a number of inherent dangers, not the least of which was the ability to +freeze an NFS server by asking it to read a file for which a mandatory lock +existed. From this release of the kernel, mandatory locking can be turned on and off on a per-filesystem basis, using the mount options 'mand' and 'nomand'. diff --git a/Documentation/filesystems/nfs/idmapper.txt b/Documentation/filesystems/nfs/idmapper.txt index 9c8fd6148656..120fd3cf7fd9 100644 --- a/Documentation/filesystems/nfs/idmapper.txt +++ b/Documentation/filesystems/nfs/idmapper.txt @@ -47,7 +47,7 @@ request-key will find the first matching line and corresponding program. In this case, /some/other/program will handle all uid lookups and /usr/sbin/nfs.idmap will handle gid, user, and group lookups. -See for more information +See for more information about the request-key function. diff --git a/Documentation/filesystems/pohmelfs/design_notes.txt b/Documentation/filesystems/pohmelfs/design_notes.txt index dcf833587162..8aef91335701 100644 --- a/Documentation/filesystems/pohmelfs/design_notes.txt +++ b/Documentation/filesystems/pohmelfs/design_notes.txt @@ -58,8 +58,9 @@ data transfers. POHMELFS clients operate with a working set of servers and are capable of balancing read-only operations (like lookups or directory listings) between them according to IO priorities. Administrators can add or remove servers from the set at run-time via special commands (described -in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers, which are connected -with write permission turned on. IO priority and permissions can be changed in run-time. +in Documentation/filesystems/pohmelfs/info.txt file). Writes are replicated to all servers, which +are connected with write permission turned on. IO priority and permissions can be changed in +run-time. POHMELFS is capable of full data channel encryption and/or strong crypto hashing. One can select any kernel supported cipher, encryption mode, hash type and operation mode diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index db3b1aba32a3..0ec91f03422e 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -1263,7 +1263,7 @@ review the kernel documentation in the directory /usr/src/linux/Documentation. This chapter is heavily based on the documentation included in the pre 2.2 kernels, and became part of it in version 2.2.1 of the Linux kernel. -Please see: Documentation/sysctls/ directory for descriptions of these +Please see: Documentation/sysctl/ directory for descriptions of these entries. ------------------------------------------------------------------------------ diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 52d8fb81cfff..43cbd0821721 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -1053,9 +1053,6 @@ manipulate dentries: and the dentry is returned. The caller must use dput() to free the dentry when it finishes using it. -For further information on dentry locking, please refer to the document -Documentation/filesystems/dentry-locking.txt. - Mount Options ============= diff --git a/Documentation/frv/booting.txt b/Documentation/frv/booting.txt index 37c4d84a0e57..9bdf4b46e741 100644 --- a/Documentation/frv/booting.txt +++ b/Documentation/frv/booting.txt @@ -180,9 +180,3 @@ separated by spaces: This tells the kernel what program to run initially. By default this is /sbin/init, but /sbin/sash or /bin/sh are common alternatives. - - (*) vdc=... - - This option configures the MB93493 companion chip visual display - driver. Please see Documentation/frv/mb93493/vdc.txt for more - information. diff --git a/Documentation/input/input.txt b/Documentation/input/input.txt index b93c08442e3c..b3d6787b4fb1 100644 --- a/Documentation/input/input.txt +++ b/Documentation/input/input.txt @@ -111,7 +111,7 @@ LCDs and many other purposes. The monitor and speaker controls should be easy to add to the hid/input interface, but for the UPSs and LCDs it doesn't make much sense. For this, -the hiddev interface was designed. See Documentation/usb/hiddev.txt +the hiddev interface was designed. See Documentation/hid/hiddev.txt for more information about it. The usage of the usbhid module is very simple, it takes no parameters, diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt index 0e0734b509d8..eda1eb1451a0 100644 --- a/Documentation/kernel-docs.txt +++ b/Documentation/kernel-docs.txt @@ -300,7 +300,7 @@ * Title: "The Kernel Hacking HOWTO" Author: Various Talented People, and Rusty. - Location: in kernel tree, Documentation/DocBook/kernel-hacking/ + Location: in kernel tree, Documentation/DocBook/kernel-hacking.tmpl (must be built as "make {htmldocs | psdocs | pdfdocs}) Keywords: HOWTO, kernel contexts, deadlock, locking, modules, symbols, return conventions. @@ -351,7 +351,7 @@ * Title: "Linux Kernel Locking HOWTO" Author: Various Talented People, and Rusty. - Location: in kernel tree, Documentation/DocBook/kernel-locking/ + Location: in kernel tree, Documentation/DocBook/kernel-locking.tmpl (must be built as "make {htmldocs | psdocs | pdfdocs}) Keywords: locks, locking, spinlock, semaphore, atomic, race condition, bottom halves, tasklets, softirqs. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 854ed5ca7e3f..be9370c764c8 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -163,7 +163,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. rsdt -- prefer RSDT over (default) XSDT copy_dsdt -- copy DSDT to memory - See also Documentation/power/pm.txt, pci=noacpi + See also Documentation/power/runtime_pm.txt, pci=noacpi acpi_rsdp= [ACPI,EFI,KEXEC] Pass the RSDP address to the kernel, mostly used @@ -319,7 +319,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. amijoy.map= [HW,JOY] Amiga joystick support Map of devices attached to JOY0DAT and JOY1DAT Format: , - See also Documentation/kernel/input/joystick.txt + See also Documentation/input/joystick.txt analog.map= [HW,JOY] Analog joystick and gamepad support Specifies type or capabilities of an analog joystick @@ -408,7 +408,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. bttv.radio= Most important insmod options are available as kernel args too. bttv.pll= See Documentation/video4linux/bttv/Insmod-options - bttv.tuner= and Documentation/video4linux/bttv/CARDLIST + bttv.tuner= bulk_remove=off [PPC] This parameter disables the use of the pSeries firmware feature for flushing multiple hpte entries @@ -724,7 +724,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. elevator= [IOSCHED] Format: {"cfq" | "deadline" | "noop"} - See Documentation/block/as-iosched.txt and + See Documentation/block/cfq-iosched.txt and Documentation/block/deadline-iosched.txt for details. elfcorehdr= [IA-64,PPC,SH,X86] @@ -765,7 +765,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. fail_make_request=[KNL] General fault injection mechanism. Format: ,,, - See also /Documentation/fault-injection/. + See also Documentation/fault-injection/. floppy= [HW] See Documentation/blockdev/floppy.txt. @@ -2375,7 +2375,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Format: sonypi.*= [HW] Sony Programmable I/O Control Device driver - See Documentation/sonypi.txt + See Documentation/laptops/sonypi.txt specialix= [HW,SERIAL] Specialix multi-serial port adapter See Documentation/serial/specialix.txt. diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 61815483efa3..3ff0dad62d36 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -736,7 +736,7 @@ status as "unknown". The available commands are: sysfs notes: The ThinkLight sysfs interface is documented by the LED class -documentation, in Documentation/leds-class.txt. The ThinkLight LED name +documentation, in Documentation/leds/leds-class.txt. The ThinkLight LED name is "tpacpi::thinklight". Due to limitations in the sysfs LED class, if the status of the ThinkLight @@ -833,7 +833,7 @@ All of the above can be turned on and off and can be made to blink. sysfs notes: The ThinkPad LED sysfs interface is described in detail by the LED class -documentation, in Documentation/leds-class.txt. +documentation, in Documentation/leds/leds-class.txt. The LEDs are named (in LED ID order, from 0 to 12): "tpacpi::power", "tpacpi:orange:batt", "tpacpi:green:batt", diff --git a/Documentation/media-framework.txt b/Documentation/media-framework.txt index 669b5fb03a86..3a0f879533ce 100644 --- a/Documentation/media-framework.txt +++ b/Documentation/media-framework.txt @@ -9,8 +9,8 @@ Introduction ------------ The media controller API is documented in DocBook format in -Documentation/DocBook/v4l/media-controller.xml. This document will focus on -the kernel-side implementation of the media framework. +Documentation/DocBook/media/v4l/media-controller.xml. This document will focus +on the kernel-side implementation of the media framework. Abstract media device model diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index f0d3a8026a56..2759f7c188f0 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -438,7 +438,7 @@ There are certain things that the Linux kernel memory barriers do not guarantee: [*] For information on bus mastering DMA and coherency please read: Documentation/PCI/pci.txt - Documentation/PCI/PCI-DMA-mapping.txt + Documentation/DMA-API-HOWTO.txt Documentation/DMA-API.txt diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt index 58fd7414e6c0..729985ed05bd 100644 --- a/Documentation/networking/scaling.txt +++ b/Documentation/networking/scaling.txt @@ -73,7 +73,7 @@ of queues to IRQs can be determined from /proc/interrupts. By default, an IRQ may be handled on any CPU. Because a non-negligible part of packet processing takes place in receive interrupt handling, it is advantageous to spread receive interrupts between CPUs. To manually adjust the IRQ -affinity of each interrupt see Documentation/IRQ-affinity. Some systems +affinity of each interrupt see Documentation/IRQ-affinity.txt. Some systems will be running irqbalance, a daemon that dynamically optimizes IRQ assignments and as a result may override any manual settings. diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt index ddd78172ef73..05a7fe76232d 100644 --- a/Documentation/power/basic-pm-debugging.txt +++ b/Documentation/power/basic-pm-debugging.txt @@ -173,7 +173,7 @@ kernel messages using the serial console. This may provide you with some information about the reasons of the suspend (resume) failure. Alternatively, it may be possible to use a FireWire port for debugging with firescope (ftp://ftp.firstfloor.org/pub/ak/firescope/). On x86 it is also possible to -use the PM_TRACE mechanism documented in Documentation/s2ram.txt . +use the PM_TRACE mechanism documented in Documentation/power/s2ram.txt . 2. Testing suspend to RAM (STR) diff --git a/Documentation/power/userland-swsusp.txt b/Documentation/power/userland-swsusp.txt index 1101bee4e822..0e870825c1b9 100644 --- a/Documentation/power/userland-swsusp.txt +++ b/Documentation/power/userland-swsusp.txt @@ -77,7 +77,8 @@ SNAPSHOT_SET_SWAP_AREA - set the resume partition and the offset (in resume_swap_area, as defined in kernel/power/suspend_ioctls.h, containing the resume device specification and the offset); for swap partitions the offset is always 0, but it is different from zero for - swap files (see Documentation/swsusp-and-swap-files.txt for details). + swap files (see Documentation/power/swsusp-and-swap-files.txt for + details). SNAPSHOT_PLATFORM_SUPPORT - enable/disable the hibernation platform support, depending on the argument value (enable, if the argument is nonzero) diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt index 83668e5dd17f..03c9d9299c6b 100644 --- a/Documentation/rfkill.txt +++ b/Documentation/rfkill.txt @@ -117,5 +117,4 @@ The contents of these variables corresponds to the "name", "state" and "type" sysfs files explained above. -For further details consult Documentation/ABI/stable/dev-rfkill and -Documentation/ABI/stable/sysfs-class-rfkill. +For further details consult Documentation/ABI/stable/sysfs-class-rfkill. diff --git a/Documentation/scsi/aic7xxx_old.txt b/Documentation/scsi/aic7xxx_old.txt index 7bd210ab45a1..ecfc474f36a8 100644 --- a/Documentation/scsi/aic7xxx_old.txt +++ b/Documentation/scsi/aic7xxx_old.txt @@ -444,7 +444,7 @@ linux-1.1.x and fairly stable since linux-1.2.x, and are also in FreeBSD Kernel Compile options ------------------------------ The various kernel compile time options for this driver are now fairly - well documented in the file Documentation/Configure.help. In order to + well documented in the file drivers/scsi/Kconfig. In order to see this documentation, you need to use one of the advanced configuration programs (menuconfig and xconfig). If you are using the "make menuconfig" method of configuring your kernel, then you would simply highlight the diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt index 5f17d29c59b5..a340b18cd4eb 100644 --- a/Documentation/scsi/scsi_mid_low_api.txt +++ b/Documentation/scsi/scsi_mid_low_api.txt @@ -55,11 +55,6 @@ or in the same directory as the C source code. For example to find a url about the USB mass storage driver see the /usr/src/linux/drivers/usb/storage directory. -The Linux kernel source Documentation/DocBook/scsidrivers.tmpl file -refers to this file. With the appropriate DocBook tool-set, this permits -users to generate html, ps and pdf renderings of information within this -file (e.g. the interface functions). - Driver structure ================ Traditionally an LLD for the SCSI subsystem has been at least two files in diff --git a/Documentation/security/keys-trusted-encrypted.txt b/Documentation/security/keys-trusted-encrypted.txt index 5f50ccabfc8a..c9e4855ed3d7 100644 --- a/Documentation/security/keys-trusted-encrypted.txt +++ b/Documentation/security/keys-trusted-encrypted.txt @@ -156,4 +156,5 @@ Load an encrypted key "evm" from saved blob: Other uses for trusted and encrypted keys, such as for disk and file encryption are anticipated. In particular the new format 'ecryptfs' has been defined in in order to use encrypted keys to mount an eCryptfs filesystem. More details -about the usage can be found in the file 'Documentation/keys-ecryptfs.txt'. +about the usage can be found in the file +'Documentation/security/keys-ecryptfs.txt'. diff --git a/Documentation/sound/oss/PAS16 b/Documentation/sound/oss/PAS16 index 951b3dce51b4..3dca4b75988e 100644 --- a/Documentation/sound/oss/PAS16 +++ b/Documentation/sound/oss/PAS16 @@ -60,8 +60,7 @@ With PAS16 you can use two audio device files at the same time. /dev/dsp (and The new stuff for 2.3.99 and later ============================================================================ -The following configuration options from Documentation/Configure.help -are relevant to configuring the PAS16: +The following configuration options are relevant to configuring the PAS16: Sound card support CONFIG_SOUND diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx index 00511e08db78..3352f97430e4 100644 --- a/Documentation/spi/pxa2xx +++ b/Documentation/spi/pxa2xx @@ -2,7 +2,7 @@ PXA2xx SPI on SSP driver HOWTO =================================================== This a mini howto on the pxa2xx_spi driver. The driver turns a PXA2xx synchronous serial port into a SPI master controller -(see Documentation/spi/spi_summary). The driver has the following features +(see Documentation/spi/spi-summary). The driver has the following features - Support for any PXA2xx SSP - SSP PIO and SSP DMA data transfers. @@ -85,7 +85,7 @@ Declaring Slave Devices ----------------------- Typically each SPI slave (chip) is defined in the arch/.../mach-*/board-*.c using the "spi_board_info" structure found in "linux/spi/spi.h". See -"Documentation/spi/spi_summary" for additional information. +"Documentation/spi/spi-summary" for additional information. Each slave device attached to the PXA must provide slave specific configuration information via the structure "pxa2xx_spi_chip" found in diff --git a/Documentation/timers/highres.txt b/Documentation/timers/highres.txt index 21332233cef1..e8789976e77c 100644 --- a/Documentation/timers/highres.txt +++ b/Documentation/timers/highres.txt @@ -30,7 +30,7 @@ hrtimer base infrastructure --------------------------- The hrtimer base infrastructure was merged into the 2.6.16 kernel. Details of -the base implementation are covered in Documentation/hrtimers/hrtimer.txt. See +the base implementation are covered in Documentation/timers/hrtimers.txt. See also figure #2 (OLS slides p. 15) The main differences to the timer wheel, which holds the armed timer_list type diff --git a/Documentation/usb/dma.txt b/Documentation/usb/dma.txt index 84ef865237db..444651e70d95 100644 --- a/Documentation/usb/dma.txt +++ b/Documentation/usb/dma.txt @@ -7,7 +7,7 @@ API OVERVIEW The big picture is that USB drivers can continue to ignore most DMA issues, though they still must provide DMA-ready buffers (see -Documentation/PCI/PCI-DMA-mapping.txt). That's how they've worked through +Documentation/DMA-API-HOWTO.txt). That's how they've worked through the 2.4 (and earlier) kernels. OR: they can now be DMA-aware. @@ -57,7 +57,7 @@ and effects like cache-trashing can impose subtle penalties. force a consistent memory access ordering by using memory barriers. It's not using a streaming DMA mapping, so it's good for small transfers on systems where the I/O would otherwise thrash an IOMMU mapping. (See - Documentation/PCI/PCI-DMA-mapping.txt for definitions of "coherent" and + Documentation/DMA-API-HOWTO.txt for definitions of "coherent" and "streaming" DMA mappings.) Asking for 1/Nth of a page (as well as asking for N pages) is reasonably @@ -88,7 +88,7 @@ WORKING WITH EXISTING BUFFERS Existing buffers aren't usable for DMA without first being mapped into the DMA address space of the device. However, most buffers passed to your driver can safely be used with such DMA mapping. (See the first section -of Documentation/PCI/PCI-DMA-mapping.txt, titled "What memory is DMA-able?") +of Documentation/DMA-API-HOWTO.txt, titled "What memory is DMA-able?") - When you're using scatterlists, you can map everything at once. On some systems, this kicks in an IOMMU and turns the scatterlists into single diff --git a/Documentation/virtual/lguest/lguest.c b/Documentation/virtual/lguest/lguest.c index d928c134dee6..c095d79cae73 100644 --- a/Documentation/virtual/lguest/lguest.c +++ b/Documentation/virtual/lguest/lguest.c @@ -436,7 +436,7 @@ static unsigned long load_bzimage(int fd) /* * Go back to the start of the file and read the header. It should be - * a Linux boot header (see Documentation/x86/i386/boot.txt) + * a Linux boot header (see Documentation/x86/boot.txt) */ lseek(fd, 0, SEEK_SET); read(fd, &boot, sizeof(boot)); diff --git a/Documentation/vm/numa b/Documentation/vm/numa index a200a386429d..ade01274212d 100644 --- a/Documentation/vm/numa +++ b/Documentation/vm/numa @@ -109,11 +109,11 @@ to improve NUMA locality using various CPU affinity command line interfaces, such as taskset(1) and numactl(1), and program interfaces such as sched_setaffinity(2). Further, one can modify the kernel's default local allocation behavior using Linux NUMA memory policy. -[see Documentation/vm/numa_memory_policy.] +[see Documentation/vm/numa_memory_policy.txt.] System administrators can restrict the CPUs and nodes' memories that a non- privileged user can specify in the scheduling or NUMA commands and functions -using control groups and CPUsets. [see Documentation/cgroups/CPUsets.txt] +using control groups and CPUsets. [see Documentation/cgroups/cpusets.txt] On architectures that do not hide memoryless nodes, Linux will include only zones [nodes] with memory in the zonelists. This means that for a memoryless diff --git a/Documentation/vm/slub.txt b/Documentation/vm/slub.txt index 07375e73981a..f464f47bc60d 100644 --- a/Documentation/vm/slub.txt +++ b/Documentation/vm/slub.txt @@ -17,7 +17,7 @@ data and perform operation on the slabs. By default slabinfo only lists slabs that have data in them. See "slabinfo -h" for more options when running the command. slabinfo can be compiled with -gcc -o slabinfo Documentation/vm/slabinfo.c +gcc -o slabinfo tools/slub/slabinfo.c Some of the modes of operation of slabinfo require that slub debugging be enabled on the command line. F.e. no tracking information will be diff --git a/arch/alpha/kernel/srm_env.c b/arch/alpha/kernel/srm_env.c index f0df3fbd8402..b9fc6c309d2e 100644 --- a/arch/alpha/kernel/srm_env.c +++ b/arch/alpha/kernel/srm_env.c @@ -4,9 +4,8 @@ * * (C) 2001,2002,2006 by Jan-Benedict Glaw * - * This driver is at all a modified version of Erik Mouw's - * Documentation/DocBook/procfs_example.c, so: thank - * you, Erik! He can be reached via email at + * This driver is a modified version of Erik Mouw's example proc + * interface, so: thank you, Erik! He can be reached via email at * . It is based on an idea * provided by DEC^WCompaq^WIntel's "Jumpstart" CD. They * included a patch like this as well. Thanks for idea! diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3269576dbfa8..05b53941b819 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1374,7 +1374,7 @@ config SMP processor machines. On a single processor machine, the kernel will run faster if you say N here. - See also , + See also , and the SMP-HOWTO available at . diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index d66605dea55a..4bdb77bb5e62 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -238,7 +238,7 @@ extern void _memset_io(volatile void __iomem *, int, size_t); * ioremap and friends. * * ioremap takes a PCI memory address, as specified in - * Documentation/IO-mapping.txt. + * Documentation/io-mapping.txt. * */ #ifndef __arch_ioremap diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index acc600f5e72f..937c42845df9 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -142,8 +142,7 @@ static struct platform_device *devices[] __initdata = { /* We have to state that there are HWMON devices on the I2C bus on XCEP. * Drivers for HWMON verify capabilities of the adapter when loading and - * refuse to attach if the adapter doesn't support HWMON class of devices. - * See also Documentation/i2c/porting-clients. */ + * refuse to attach if the adapter doesn't support HWMON class of devices. */ static struct i2c_pxa_platform_data xcep_i2c_platform_data = { .class = I2C_CLASS_HWMON }; diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index 80241fe03f50..f5f4ef149aac 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -915,7 +915,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static dma_addr_t sba_map_page(struct device *dev, struct page *page, unsigned long poff, size_t size, @@ -1044,7 +1044,7 @@ sba_mark_clean(struct ioc *ioc, dma_addr_t iova, size_t size) * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static void sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size, enum dma_data_direction dir, struct dma_attrs *attrs) @@ -1127,7 +1127,7 @@ void sba_unmap_single_attrs(struct device *dev, dma_addr_t iova, size_t size, * @size: number of bytes mapped in driver buffer. * @dma_handle: IOVA of new buffer. * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static void * sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags) @@ -1190,7 +1190,7 @@ sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp * @vaddr: virtual address IOVA of "consistent" buffer. * @dma_handler: IO virtual address of "consistent" buffer. * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static void sba_free_coherent (struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle) @@ -1453,7 +1453,7 @@ static void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist, * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static int sba_map_sg_attrs(struct device *dev, struct scatterlist *sglist, int nents, enum dma_data_direction dir, @@ -1549,7 +1549,7 @@ static int sba_map_sg_attrs(struct device *dev, struct scatterlist *sglist, * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist, int nents, enum dma_data_direction dir, diff --git a/arch/m68k/q40/README b/arch/m68k/q40/README index b26d5f55e91d..93f4c4cd3c45 100644 --- a/arch/m68k/q40/README +++ b/arch/m68k/q40/README @@ -31,7 +31,7 @@ drivers used by the Q40, apart from the very obvious (console etc.): char/joystick/* # most of this should work, not # in default config.in block/q40ide.c # startup for ide - ide* # see Documentation/ide.txt + ide* # see Documentation/ide/ide.txt floppy.c # normal PC driver, DMA emu in asm/floppy.h # and arch/m68k/kernel/entry.S # see drivers/block/README.fd diff --git a/arch/microblaze/include/asm/dma-mapping.h b/arch/microblaze/include/asm/dma-mapping.h index 8fbb0ec10233..a569514cf19f 100644 --- a/arch/microblaze/include/asm/dma-mapping.h +++ b/arch/microblaze/include/asm/dma-mapping.h @@ -16,7 +16,7 @@ #define _ASM_MICROBLAZE_DMA_MAPPING_H /* - * See Documentation/PCI/PCI-DMA-mapping.txt and + * See Documentation/DMA-API-HOWTO.txt and * Documentation/DMA-API.txt for documentation. */ diff --git a/arch/mips/include/asm/lasat/lasat.h b/arch/mips/include/asm/lasat/lasat.h index a1ada1c27c16..e8ff70f80e13 100644 --- a/arch/mips/include/asm/lasat/lasat.h +++ b/arch/mips/include/asm/lasat/lasat.h @@ -41,10 +41,8 @@ enum lasat_mtdparts { /* * The format of the data record in the EEPROM. - * See Documentation/LASAT/eeprom.txt for a detailed description - * of the fields in this struct, and the LASAT Hardware Configuration - * field specification for a detailed description of the config - * field. + * See the LASAT Hardware Configuration field specification for a detailed + * description of the config field. */ #include diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index 1f870340ebdd..f093b3a8a4a1 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -195,7 +195,7 @@ config SMP singleprocessor machines. On a singleprocessor machine, the kernel will run faster if you say N here. - See also , + See also , and the SMP-HOWTO available at . diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c index 2623d19f4f4c..2381df83bd00 100644 --- a/arch/mn10300/kernel/irq.c +++ b/arch/mn10300/kernel/irq.c @@ -260,7 +260,6 @@ void set_intr_level(int irq, u16 level) /* * mark an interrupt to be ACK'd after interrupt handlers have been run rather * than before - * - see Documentation/mn10300/features.txt */ void mn10300_set_lateack_irq_type(int irq) { diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig index 4558bafbd1a2..9460e1c266dd 100644 --- a/arch/openrisc/Kconfig +++ b/arch/openrisc/Kconfig @@ -1,6 +1,6 @@ # # For a description of the syntax of this configuration file, -# see Documentation/kbuild/config-language.txt. +# see Documentation/kbuild/kconfig-language.txt. # config OPENRISC diff --git a/arch/openrisc/include/asm/dma-mapping.h b/arch/openrisc/include/asm/dma-mapping.h index 60b472233900..b206ba4608b2 100644 --- a/arch/openrisc/include/asm/dma-mapping.h +++ b/arch/openrisc/include/asm/dma-mapping.h @@ -18,7 +18,7 @@ #define __ASM_OPENRISC_DMA_MAPPING_H /* - * See Documentation/PCI/PCI-DMA-mapping.txt and + * See Documentation/DMA-API-HOWTO.txt and * Documentation/DMA-API.txt for documentation. * * This file is written with the intention of eventually moving over diff --git a/arch/parisc/include/asm/dma-mapping.h b/arch/parisc/include/asm/dma-mapping.h index 890531e32fe8..467bbd510eac 100644 --- a/arch/parisc/include/asm/dma-mapping.h +++ b/arch/parisc/include/asm/dma-mapping.h @@ -5,7 +5,7 @@ #include #include -/* See Documentation/PCI/PCI-DMA-mapping.txt */ +/* See Documentation/DMA-API-HOWTO.txt */ struct hppa_dma_ops { int (*dma_supported)(struct device *dev, u64 mask); void *(*alloc_consistent)(struct device *dev, size_t size, dma_addr_t *iova, gfp_t flag); diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c index a029f74a3c5c..d047edea2504 100644 --- a/arch/parisc/kernel/pci-dma.c +++ b/arch/parisc/kernel/pci-dma.c @@ -2,7 +2,7 @@ ** PARISC 1.1 Dynamic DMA mapping support. ** This implementation is for PA-RISC platforms that do not support ** I/O TLBs (aka DMA address translation hardware). -** See Documentation/PCI/PCI-DMA-mapping.txt for interface definitions. +** See Documentation/DMA-API-HOWTO.txt for interface definitions. ** ** (c) Copyright 1999,2000 Hewlett-Packard Company ** (c) Copyright 2000 Grant Grundler diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h index 0947b36e534c..5e0b6d511e14 100644 --- a/arch/powerpc/include/asm/qe.h +++ b/arch/powerpc/include/asm/qe.h @@ -196,7 +196,7 @@ static inline int qe_alive_during_sleep(void) /* Structure that defines QE firmware binary files. * - * See Documentation/powerpc/qe-firmware.txt for a description of these + * See Documentation/powerpc/qe_firmware.txt for a description of these * fields. */ struct qe_firmware { diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 904c6cbaf45b..3363fbc964f8 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -382,7 +382,7 @@ static void qe_upload_microcode(const void *base, /* * Upload a microcode to the I-RAM at a specific address. * - * See Documentation/powerpc/qe-firmware.txt for information on QE microcode + * See Documentation/powerpc/qe_firmware.txt for information on QE microcode * uploading. * * Currently, only version 1 is supported, so the 'version' field must be diff --git a/arch/unicore32/include/asm/io.h b/arch/unicore32/include/asm/io.h index 4bd87f3d13d4..1a5c5a5eb39c 100644 --- a/arch/unicore32/include/asm/io.h +++ b/arch/unicore32/include/asm/io.h @@ -32,7 +32,7 @@ extern void __uc32_iounmap(volatile void __iomem *addr); * ioremap and friends. * * ioremap takes a PCI memory address, as specified in - * Documentation/IO-mapping.txt. + * Documentation/io-mapping.txt. * */ #define ioremap(cookie, size) __uc32_ioremap(cookie, size) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 6a47bb22657f..9a4a267a8a55 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -279,7 +279,7 @@ config SMP Y to "Enhanced Real Time Clock Support", below. The "Advanced Power Management" code will be disabled if you say Y here. - See also , + See also , and the SMP-HOWTO available at . diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index c0f8a5c88910..bf56e1793272 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -139,7 +139,7 @@ config IOMMU_DEBUG code. When you use it make sure you have a big enough IOMMU/AGP aperture. Most of the options enabled by this can be set more finegrained using the iommu= command line - options. See Documentation/x86_64/boot-options.txt for more + options. See Documentation/x86/x86_64/boot-options.txt for more details. config IOMMU_STRESS diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S index 93e689f4bd86..bdb4d458ec8c 100644 --- a/arch/x86/boot/header.S +++ b/arch/x86/boot/header.S @@ -129,7 +129,7 @@ start_sys_seg: .word SYSSEG # obsolete and meaningless, but just type_of_loader: .byte 0 # 0 means ancient bootloader, newer # bootloaders know to change this. - # See Documentation/i386/boot.txt for + # See Documentation/x86/boot.txt for # assigned ids # flags, unused bits must be zero (RFU) bit within loadflags diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h index d4c419f883a0..ed3065fd6314 100644 --- a/arch/x86/include/asm/dma-mapping.h +++ b/arch/x86/include/asm/dma-mapping.h @@ -2,7 +2,7 @@ #define _ASM_X86_DMA_MAPPING_H /* - * IOMMU interface. See Documentation/PCI/PCI-DMA-mapping.txt and + * IOMMU interface. See Documentation/DMA-API-HOWTO.txt and * Documentation/DMA-API.txt for documentation. */ diff --git a/arch/x86/kernel/amd_gart_64.c b/arch/x86/kernel/amd_gart_64.c index 8a439d364b94..b1e7c7f7a0af 100644 --- a/arch/x86/kernel/amd_gart_64.c +++ b/arch/x86/kernel/amd_gart_64.c @@ -5,7 +5,7 @@ * This allows to use PCI devices that only support 32bit addresses on systems * with more than 4GB. * - * See Documentation/PCI/PCI-DMA-mapping.txt for the interface specification. + * See Documentation/DMA-API-HOWTO.txt for the interface specification. * * Copyright 2002 Andi Kleen, SuSE Labs. * Subject to the GNU General Public License v2 only. diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index 0371c484bb8a..a46bd383953c 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -249,8 +249,6 @@ extern int (*console_blank_hook)(int); #define APM_MINOR_DEV 134 /* - * See Documentation/Config.help for the configuration options. - * * Various options can be changed at boot time as follows: * (We allow underscores for compatibility with the modules code) * apm=on/off enable/disable APM diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index b49d00da2aed..622872054fbe 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -117,8 +117,8 @@ again: } /* - * See for the iommu kernel parameter - * documentation. + * See for the iommu kernel + * parameter documentation. */ static __init int iommu_setup(char *p) { diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c index a7346ab97a3c..ae6a93306325 100644 --- a/drivers/char/apm-emulation.c +++ b/drivers/char/apm-emulation.c @@ -40,10 +40,7 @@ #define APM_MINOR_DEV 134 /* - * See Documentation/Config.help for the configuration options. - * - * Various options can be changed at boot time as follows: - * (We allow underscores for compatibility with the modules code) + * One option can be changed at boot time as follows: * apm=on/off enable/disable APM */ diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c index 2c8b84dd9dac..2be21694fac1 100644 --- a/drivers/input/misc/rotary_encoder.c +++ b/drivers/input/misc/rotary_encoder.c @@ -7,7 +7,7 @@ * state machine code inspired by code from Tim Ruetz * * A generic driver for rotary encoders connected to GPIO lines. - * See file:Documentation/input/rotary_encoder.txt for more information + * See file:Documentation/input/rotary-encoder.txt for more information * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index b591e726a6fa..807c875f1c2e 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -400,7 +400,7 @@ config LEDS_TRIGGER_TIMER This allows LEDs to be controlled by a programmable timer via sysfs. Some LED hardware can be programmed to start blinking the LED without any further software interaction. - For more details read Documentation/leds-class.txt. + For more details read Documentation/leds/leds-class.txt. If unsure, say Y. diff --git a/drivers/media/dvb/dvb-usb/af9005-remote.c b/drivers/media/dvb/dvb-usb/af9005-remote.c index c3bc64ed405c..7e3961d0db6b 100644 --- a/drivers/media/dvb/dvb-usb/af9005-remote.c +++ b/drivers/media/dvb/dvb-usb/af9005-remote.c @@ -21,7 +21,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * see Documentation/dvb/REDME.dvb-usb for more information + * see Documentation/dvb/README.dvb-usb for more information */ #include "af9005.h" /* debug */ diff --git a/drivers/media/dvb/dvb-usb/af9005.c b/drivers/media/dvb/dvb-usb/af9005.c index 51f6439dcfd5..0351c0e52dd2 100644 --- a/drivers/media/dvb/dvb-usb/af9005.c +++ b/drivers/media/dvb/dvb-usb/af9005.c @@ -19,7 +19,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * see Documentation/dvb/REDME.dvb-usb for more information + * see Documentation/dvb/README.dvb-usb for more information */ #include "af9005.h" diff --git a/drivers/media/dvb/frontends/dib3000.h b/drivers/media/dvb/frontends/dib3000.h index ba917359fa65..404f63a6f26b 100644 --- a/drivers/media/dvb/frontends/dib3000.h +++ b/drivers/media/dvb/frontends/dib3000.h @@ -17,7 +17,7 @@ * Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver * sources, on which this driver (and the dvb-dibusb) are based. * - * see Documentation/dvb/README.dibusb for more information + * see Documentation/dvb/README.dvb-usb for more information * */ diff --git a/drivers/media/dvb/frontends/dib3000mb.c b/drivers/media/dvb/frontends/dib3000mb.c index e80c59796368..437904cbf3e6 100644 --- a/drivers/media/dvb/frontends/dib3000mb.c +++ b/drivers/media/dvb/frontends/dib3000mb.c @@ -17,7 +17,7 @@ * Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver * sources, on which this driver (and the dvb-dibusb) are based. * - * see Documentation/dvb/README.dibusb for more information + * see Documentation/dvb/README.dvb-usb for more information * */ diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 4be8373d43e5..66b616ebe536 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -142,7 +142,7 @@ config MTD_OF_PARTS help This provides a partition parsing function which derives the partition map from the children of the flash node, - as described in Documentation/powerpc/booting-without-of.txt. + as described in Documentation/devicetree/booting-without-of.txt. config MTD_AR7_PARTS tristate "TI AR7 partitioning support" diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 8d0314dbd946..8b8efe52b228 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1063,8 +1063,7 @@ config SMSC911X Say Y here if you want support for SMSC LAN911x and LAN921x families of ethernet controllers. - To compile this driver as a module, choose M here and read - . The module + To compile this driver as a module, choose M here. The module will be called smsc911x. config SMSC911X_ARCH_HOOKS diff --git a/drivers/net/can/sja1000/sja1000_of_platform.c b/drivers/net/can/sja1000/sja1000_of_platform.c index cee6ba2b8b58..c3dd9d09be57 100644 --- a/drivers/net/can/sja1000/sja1000_of_platform.c +++ b/drivers/net/can/sja1000/sja1000_of_platform.c @@ -29,7 +29,7 @@ * nxp,external-clock-frequency = <16000000>; * }; * - * See "Documentation/powerpc/dts-bindings/can/sja1000.txt" for further + * See "Documentation/devicetree/bindings/net/can/sja1000.txt" for further * information. */ diff --git a/drivers/net/tulip/21142.c b/drivers/net/tulip/21142.c index 092c3faa882a..25b8deedbef8 100644 --- a/drivers/net/tulip/21142.c +++ b/drivers/net/tulip/21142.c @@ -7,9 +7,6 @@ This software may be used and distributed according to the terms of the GNU General Public License, incorporated herein by reference. - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. - DC21143 manual "21143 PCI/CardBus 10/100Mb/s Ethernet LAN Controller Hardware Reference Manual" is currently available at : http://developer.intel.com/design/network/manuals/278074.htm diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c index fa5eee925f25..14d5b611783d 100644 --- a/drivers/net/tulip/eeprom.c +++ b/drivers/net/tulip/eeprom.c @@ -7,8 +7,6 @@ This software may be used and distributed according to the terms of the GNU General Public License, incorporated herein by reference. - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. Please submit bug reports to http://bugzilla.kernel.org/. */ diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/tulip/interrupt.c index 5350d753e0ff..4fb8c8c0a420 100644 --- a/drivers/net/tulip/interrupt.c +++ b/drivers/net/tulip/interrupt.c @@ -7,10 +7,7 @@ This software may be used and distributed according to the terms of the GNU General Public License, incorporated herein by reference. - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. Please submit bugs to http://bugzilla.kernel.org/ . - */ #include diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c index 4bd13922875d..beeb17b52ad4 100644 --- a/drivers/net/tulip/media.c +++ b/drivers/net/tulip/media.c @@ -7,9 +7,6 @@ This software may be used and distributed according to the terms of the GNU General Public License, incorporated herein by reference. - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. - Please submit bugs to http://bugzilla.kernel.org/ . */ diff --git a/drivers/net/tulip/pnic.c b/drivers/net/tulip/pnic.c index 52d898bdbeb4..9c16e4ad02a6 100644 --- a/drivers/net/tulip/pnic.c +++ b/drivers/net/tulip/pnic.c @@ -7,9 +7,6 @@ This software may be used and distributed according to the terms of the GNU General Public License, incorporated herein by reference. - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. - Please submit bugs to http://bugzilla.kernel.org/ . */ diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/tulip/pnic2.c index 93358ee4d830..04a7e477eaff 100644 --- a/drivers/net/tulip/pnic2.c +++ b/drivers/net/tulip/pnic2.c @@ -8,9 +8,6 @@ This software may be used and distributed according to the terms of the GNU General Public License, incorporated herein by reference. - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. - Please submit bugs to http://bugzilla.kernel.org/ . */ diff --git a/drivers/net/tulip/timer.c b/drivers/net/tulip/timer.c index 2017faf2d0e6..19078d28ffb9 100644 --- a/drivers/net/tulip/timer.c +++ b/drivers/net/tulip/timer.c @@ -7,9 +7,6 @@ This software may be used and distributed according to the terms of the GNU General Public License, incorporated herein by reference. - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. - Please submit bugs to http://bugzilla.kernel.org/ . */ diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h index 9db528967da9..fb3887c18dc6 100644 --- a/drivers/net/tulip/tulip.h +++ b/drivers/net/tulip/tulip.h @@ -7,9 +7,6 @@ This software may be used and distributed according to the terms of the GNU General Public License, incorporated herein by reference. - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. - Please submit bugs to http://bugzilla.kernel.org/ . */ diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index 1246998a677c..b905c0dc5648 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -6,9 +6,6 @@ This software may be used and distributed according to the terms of the GNU General Public License, incorporated herein by reference. - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. - Please submit bugs to http://bugzilla.kernel.org/ . */ diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index 57a6d19eba4c..a6f762188bc3 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -668,7 +668,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) * @dev: instance of PCI owned by the driver that's asking * @mask: number of address bits this PCI device can handle * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static int sba_dma_supported( struct device *dev, u64 mask) { @@ -680,7 +680,7 @@ static int sba_dma_supported( struct device *dev, u64 mask) return(0); } - /* Documentation/PCI/PCI-DMA-mapping.txt tells drivers to try 64-bit + /* Documentation/DMA-API-HOWTO.txt tells drivers to try 64-bit * first, then fall back to 32-bit if that fails. * We are just "encouraging" 32-bit DMA masks here since we can * never allow IOMMU bypass unless we add special support for ZX1. @@ -706,7 +706,7 @@ static int sba_dma_supported( struct device *dev, u64 mask) * @size: number of bytes to map in driver buffer. * @direction: R/W or both. * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static dma_addr_t sba_map_single(struct device *dev, void *addr, size_t size, @@ -785,7 +785,7 @@ sba_map_single(struct device *dev, void *addr, size_t size, * @size: number of bytes mapped in driver buffer. * @direction: R/W or both. * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static void sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, @@ -861,7 +861,7 @@ sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, * @size: number of bytes mapped in driver buffer. * @dma_handle: IOVA of new buffer. * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static void *sba_alloc_consistent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp) @@ -892,7 +892,7 @@ static void *sba_alloc_consistent(struct device *hwdev, size_t size, * @vaddr: virtual address IOVA of "consistent" buffer. * @dma_handler: IO virtual address of "consistent" buffer. * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static void sba_free_consistent(struct device *hwdev, size_t size, void *vaddr, @@ -927,7 +927,7 @@ int dump_run_sg = 0; * @nents: number of entries in list * @direction: R/W or both. * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static int sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, @@ -1011,7 +1011,7 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, * @nents: number of entries in list * @direction: R/W or both. * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static void sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents, diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 1e88d4785321..10cf2500522b 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -31,9 +31,6 @@ config ACER_WMI wireless radio and bluetooth control, and on some laptops, exposes the mail LED and LCD backlight. - For more information about this driver see - - If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M here. @@ -164,7 +161,7 @@ config HP_ACCEL Support for a led indicating disk protection will be provided as hp::hddprotect. For more information on the feature, refer to - Documentation/hwmon/lis3lv02d. + Documentation/misc-devices/lis3lv02d. To compile this driver as a module, choose M here: the module will be called hp_accel. diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index 2e6619eff3ea..8883ca36f932 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -67,7 +67,7 @@ * * NEC MegaRAID PCI Express ROMB 1000 0408 1033 8287 * - * For history of changes, see Documentation/ChangeLog.megaraid + * For history of changes, see Documentation/scsi/ChangeLog.megaraid */ #include diff --git a/drivers/staging/cxt1e1/Kconfig b/drivers/staging/cxt1e1/Kconfig index 73430ef6ae2b..947f42a65c59 100644 --- a/drivers/staging/cxt1e1/Kconfig +++ b/drivers/staging/cxt1e1/Kconfig @@ -6,8 +6,7 @@ config CXT1E1 channelized stream WAN adapter card which contains a HDLC/Transparent mode controller. - If you want to compile this driver as a module - say M here and read . + If you want to compile this driver as a module say M here. The module will be called 'cxt1e1'. If unsure, say N. diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 86fbba6336c9..e92cbefc0f88 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -227,7 +227,7 @@ * - All sleeps use a timeout of DIGI_RETRY_TIMEOUT before looping to * recheck the condition they are sleeping on. This is defensive, * in case a wake up is lost. -* - Following Documentation/DocBook/kernel-locking.pdf no spin locks +* - Following Documentation/DocBook/kernel-locking.tmpl no spin locks * are held when calling copy_to/from_user or printk. */ diff --git a/drivers/video/igafb.c b/drivers/video/igafb.c index d885c770eb84..2d97752f79a5 100644 --- a/drivers/video/igafb.c +++ b/drivers/video/igafb.c @@ -428,7 +428,7 @@ static int __init igafb_init(void) * * IGS2000 has its I/O memory mapped and we want * to generate memory cycles on PCI, e.g. do ioremap(), - * then readb/writeb() as in Documentation/IO-mapping.txt. + * then readb/writeb() as in Documentation/io-mapping.txt. * * IGS1682 is more traditional, it responds to PCI I/O * cycles, so we want to access it with inb()/outb(). diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c index e97b0499bd0d..97b8184614ae 100644 --- a/drivers/watchdog/smsc37b787_wdt.c +++ b/drivers/watchdog/smsc37b787_wdt.c @@ -40,7 +40,7 @@ * mknod /dev/watchdog c 10 130 * * For an example userspace keep-alive daemon, see: - * Documentation/watchdog/watchdog.txt + * Documentation/watchdog/wdt.txt */ #include diff --git a/fs/configfs/inode.c b/fs/configfs/inode.c index c83f4768eeaa..ca418aaf6352 100644 --- a/fs/configfs/inode.c +++ b/fs/configfs/inode.c @@ -23,7 +23,8 @@ * * configfs Copyright (C) 2005 Oracle. All rights reserved. * - * Please see Documentation/filesystems/configfs.txt for more information. + * Please see Documentation/filesystems/configfs/configfs.txt for more + * information. */ #undef DEBUG diff --git a/fs/configfs/item.c b/fs/configfs/item.c index 76dc4c3e5d51..50cee7f9110b 100644 --- a/fs/configfs/item.c +++ b/fs/configfs/item.c @@ -23,7 +23,7 @@ * * configfs Copyright (C) 2005 Oracle. All rights reserved. * - * Please see the file Documentation/filesystems/configfs.txt for + * Please see the file Documentation/filesystems/configfs/configfs.txt for * critical information about using the config_item interface. */ diff --git a/fs/locks.c b/fs/locks.c index 703f545097de..96b33989147d 100644 --- a/fs/locks.c +++ b/fs/locks.c @@ -60,7 +60,7 @@ * * Initial implementation of mandatory locks. SunOS turned out to be * a rotten model, so I implemented the "obvious" semantics. - * See 'Documentation/mandatory.txt' for details. + * See 'Documentation/filesystems/mandatory-locking.txt' for details. * Andy Walker (andy@lysaker.kvaerner.no), April 06, 1996. * * Don't allow mandatory locks on mmap()'ed files. Added simple functions to diff --git a/fs/squashfs/Kconfig b/fs/squashfs/Kconfig index 1360d4f88f41..048b59d5b2f0 100644 --- a/fs/squashfs/Kconfig +++ b/fs/squashfs/Kconfig @@ -19,9 +19,9 @@ config SQUASHFS If you want to compile this as a module ( = code which can be inserted in and removed from the running kernel whenever you want), - say M here and read . The module - will be called squashfs. Note that the root file system (the one - containing the directory /) cannot be compiled as a module. + say M here. The module will be called squashfs. Note that the root + file system (the one containing the directory /) cannot be compiled + as a module. If unsure, say N. diff --git a/include/linux/io-mapping.h b/include/linux/io-mapping.h index 8cdcc2a199ad..c81ed2ac16bd 100644 --- a/include/linux/io-mapping.h +++ b/include/linux/io-mapping.h @@ -27,7 +27,7 @@ * The io_mapping mechanism provides an abstraction for mapping * individual pages from an io device to the CPU in an efficient fashion. * - * See Documentation/io_mapping.txt + * See Documentation/io-mapping.txt */ #ifdef CONFIG_HAVE_ATOMIC_IOMAP diff --git a/include/linux/isdn.h b/include/linux/isdn.h index 44cd663c53b6..4ccf95d681b4 100644 --- a/include/linux/isdn.h +++ b/include/linux/isdn.h @@ -68,7 +68,7 @@ #define ISDN_NET_ENCAP_SYNCPPP 4 #define ISDN_NET_ENCAP_UIHDLC 5 #define ISDN_NET_ENCAP_CISCOHDLCK 6 /* With SLARP and keepalive */ -#define ISDN_NET_ENCAP_X25IFACE 7 /* Documentation/networking/x25-iface.txt*/ +#define ISDN_NET_ENCAP_X25IFACE 7 /* Documentation/networking/x25-iface.txt */ #define ISDN_NET_ENCAP_MAX_ENCAP ISDN_NET_ENCAP_X25IFACE /* Facility which currently uses an ISDN-channel */ diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h index abd286215279..88734e871e3a 100644 --- a/include/linux/platform_data/ntc_thermistor.h +++ b/include/linux/platform_data/ntc_thermistor.h @@ -36,7 +36,7 @@ struct ntc_thermistor_platform_data { * read_uV() * * How to setup pullup_ohm, pulldown_ohm, and connect is - * described at Documentation/hwmon/ntc + * described at Documentation/hwmon/ntc_thermistor * * pullup/down_ohm: 0 for infinite / not-connected */ diff --git a/include/media/videobuf-dma-sg.h b/include/media/videobuf-dma-sg.h index 1c647e8148c4..d8fb6012c10d 100644 --- a/include/media/videobuf-dma-sg.h +++ b/include/media/videobuf-dma-sg.h @@ -34,7 +34,7 @@ * does memory allocation too using vmalloc_32(). * * videobuf_dma_*() - * see Documentation/PCI/PCI-DMA-mapping.txt, these functions to + * see Documentation/DMA-API-HOWTO.txt, these functions to * basically the same. The map function does also build a * scatterlist for the buffer (and unmap frees it ...) * diff --git a/include/target/configfs_macros.h b/include/target/configfs_macros.h index 7fe74608b437..a0fc85bbe2da 100644 --- a/include/target/configfs_macros.h +++ b/include/target/configfs_macros.h @@ -30,8 +30,8 @@ * Added CONFIGFS_EATTR() macros from original configfs.h macros * Copright (C) 2008-2009 Nicholas A. Bellinger * - * Please read Documentation/filesystems/configfs.txt before using the - * configfs interface, ESPECIALLY the parts about reference counts and + * Please read Documentation/filesystems/configfs/configfs.txt before using + * the configfs interface, ESPECIALLY the parts about reference counts and * item destructors. */ diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index 32bff6d86cb2..8260b13d93c9 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -505,7 +505,7 @@ config NETFILTER_XT_TARGET_LED echo netfilter-ssh > /sys/class/leds//trigger For more information on the LEDs available on your system, see - Documentation/leds-class.txt + Documentation/leds/leds-class.txt config NETFILTER_XT_TARGET_MARK tristate '"MARK" target support' diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig index 6c93e051f9ae..6c9e8e8f45f8 100644 --- a/sound/oss/Kconfig +++ b/sound/oss/Kconfig @@ -432,9 +432,7 @@ config SOUND_SB ALS-007 and ALS-1X0 chips (read ) and for cards based on ESS chips (read and - ). If you have an SB AWE 32 or SB AWE - 64, say Y here and also to "AWE32 synth" below and read - . If you have an IBM Mwave + ). If you have an IBM Mwave card, say Y here and read . If you compile the driver into the kernel and don't want to use diff --git a/tools/perf/util/config.c b/tools/perf/util/config.c index fe02903f7d0f..80d9598db31a 100644 --- a/tools/perf/util/config.c +++ b/tools/perf/util/config.c @@ -341,7 +341,7 @@ const char *perf_config_dirname(const char *name, const char *value) static int perf_default_core_config(const char *var __used, const char *value __used) { - /* Add other config variables here and to Documentation/config.txt. */ + /* Add other config variables here. */ return 0; } @@ -350,7 +350,7 @@ int perf_default_config(const char *var, const char *value, void *dummy __used) if (!prefixcmp(var, "core.")) return perf_default_core_config(var, value); - /* Add other config variables here and to Documentation/config.txt. */ + /* Add other config variables here. */ return 0; } -- cgit v1.2.3