diff options
Diffstat (limited to 'drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c')
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c | 260 |
1 files changed, 190 insertions, 70 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c index 0d3a9df5be36..8edf0f5bd679 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c @@ -20,6 +20,17 @@ #include "cxgb4.h" +/* DCBx version control + */ +char *dcb_ver_array[] = { + "Unknown", + "DCBx-CIN", + "DCBx-CEE 1.01", + "DCBx-IEEE", + "", "", "", + "Auto Negotiated" +}; + /* Initialize a port's Data Center Bridging state. Typically used after a * Link Down event. */ @@ -27,25 +38,45 @@ void cxgb4_dcb_state_init(struct net_device *dev) { struct port_info *pi = netdev2pinfo(dev); struct port_dcb_info *dcb = &pi->dcb; + int version_temp = dcb->dcb_version; memset(dcb, 0, sizeof(struct port_dcb_info)); dcb->state = CXGB4_DCB_STATE_START; + if (version_temp) + dcb->dcb_version = version_temp; + + netdev_dbg(dev, "%s: Initializing DCB state for port[%d]\n", + __func__, pi->port_id); +} + +void cxgb4_dcb_version_init(struct net_device *dev) +{ + struct port_info *pi = netdev2pinfo(dev); + struct port_dcb_info *dcb = &pi->dcb; + + /* Any writes here are only done on kernels that exlicitly need + * a specific version, say < 2.6.38 which only support CEE + */ + dcb->dcb_version = FW_PORT_DCB_VER_AUTO; } /* Finite State machine for Data Center Bridging. */ void cxgb4_dcb_state_fsm(struct net_device *dev, - enum cxgb4_dcb_state_input input) + enum cxgb4_dcb_state_input transition_to) { struct port_info *pi = netdev2pinfo(dev); struct port_dcb_info *dcb = &pi->dcb; struct adapter *adap = pi->adapter; + enum cxgb4_dcb_state current_state = dcb->state; - switch (input) { - case CXGB4_DCB_INPUT_FW_DISABLED: { - /* Firmware tells us it's not doing DCB */ - switch (dcb->state) { - case CXGB4_DCB_STATE_START: { + netdev_dbg(dev, "%s: State change from %d to %d for %s\n", + __func__, dcb->state, transition_to, dev->name); + + switch (current_state) { + case CXGB4_DCB_STATE_START: { + switch (transition_to) { + case CXGB4_DCB_INPUT_FW_DISABLED: { /* we're going to use Host DCB */ dcb->state = CXGB4_DCB_STATE_HOST; dcb->supported = CXGB4_DCBX_HOST_SUPPORT; @@ -53,48 +84,62 @@ void cxgb4_dcb_state_fsm(struct net_device *dev, break; } - case CXGB4_DCB_STATE_HOST: { - /* we're alreaady in Host DCB mode */ + case CXGB4_DCB_INPUT_FW_ENABLED: { + /* we're going to use Firmware DCB */ + dcb->state = CXGB4_DCB_STATE_FW_INCOMPLETE; + dcb->supported = CXGB4_DCBX_FW_SUPPORT; + break; + } + + case CXGB4_DCB_INPUT_FW_INCOMPLETE: { + /* expected transition */ + break; + } + + case CXGB4_DCB_INPUT_FW_ALLSYNCED: { + dcb->state = CXGB4_DCB_STATE_FW_ALLSYNCED; break; } default: - goto bad_state_transition; + goto bad_state_input; } break; } - case CXGB4_DCB_INPUT_FW_ENABLED: { - /* Firmware tells us that it is doing DCB */ - switch (dcb->state) { - case CXGB4_DCB_STATE_START: { - /* we're going to use Firmware DCB */ - dcb->state = CXGB4_DCB_STATE_FW_INCOMPLETE; - dcb->supported = CXGB4_DCBX_FW_SUPPORT; + case CXGB4_DCB_STATE_FW_INCOMPLETE: { + switch (transition_to) { + case CXGB4_DCB_INPUT_FW_ENABLED: { + /* we're alreaady in firmware DCB mode */ break; } - case CXGB4_DCB_STATE_FW_INCOMPLETE: - case CXGB4_DCB_STATE_FW_ALLSYNCED: { - /* we're alreaady in firmware DCB mode */ + case CXGB4_DCB_INPUT_FW_INCOMPLETE: { + /* we're already incomplete */ + break; + } + + case CXGB4_DCB_INPUT_FW_ALLSYNCED: { + dcb->state = CXGB4_DCB_STATE_FW_ALLSYNCED; + dcb->enabled = 1; + linkwatch_fire_event(dev); break; } default: - goto bad_state_transition; + goto bad_state_input; } break; } - case CXGB4_DCB_INPUT_FW_INCOMPLETE: { - /* Firmware tells us that its DCB state is incomplete */ - switch (dcb->state) { - case CXGB4_DCB_STATE_FW_INCOMPLETE: { - /* we're already incomplete */ + case CXGB4_DCB_STATE_FW_ALLSYNCED: { + switch (transition_to) { + case CXGB4_DCB_INPUT_FW_ENABLED: { + /* we're alreaady in firmware DCB mode */ break; } - case CXGB4_DCB_STATE_FW_ALLSYNCED: { + case CXGB4_DCB_INPUT_FW_INCOMPLETE: { /* We were successfully running with firmware DCB but * now it's telling us that it's in an "incomplete * state. We need to reset back to a ground state @@ -107,46 +152,48 @@ void cxgb4_dcb_state_fsm(struct net_device *dev, break; } - default: - goto bad_state_transition; - } - break; - } - - case CXGB4_DCB_INPUT_FW_ALLSYNCED: { - /* Firmware tells us that its DCB state is complete */ - switch (dcb->state) { - case CXGB4_DCB_STATE_FW_INCOMPLETE: { - dcb->state = CXGB4_DCB_STATE_FW_ALLSYNCED; + case CXGB4_DCB_INPUT_FW_ALLSYNCED: { + /* we're already all sync'ed + * this is only applicable for IEEE or + * when another VI already completed negotiaton + */ dcb->enabled = 1; linkwatch_fire_event(dev); break; } - case CXGB4_DCB_STATE_FW_ALLSYNCED: { - /* we're already all sync'ed */ + default: + goto bad_state_input; + } + break; + } + + case CXGB4_DCB_STATE_HOST: { + switch (transition_to) { + case CXGB4_DCB_INPUT_FW_DISABLED: { + /* we're alreaady in Host DCB mode */ break; } default: - goto bad_state_transition; + goto bad_state_input; } break; } default: - goto bad_state_input; + goto bad_state_transition; } return; bad_state_input: dev_err(adap->pdev_dev, "cxgb4_dcb_state_fsm: illegal input symbol %d\n", - input); + transition_to); return; bad_state_transition: dev_err(adap->pdev_dev, "cxgb4_dcb_state_fsm: bad state transition, state = %d, input = %d\n", - dcb->state, input); + current_state, transition_to); } /* Handle a DCB/DCBX update message from the firmware. @@ -160,6 +207,7 @@ void cxgb4_dcb_handle_fw_update(struct adapter *adap, struct port_info *pi = netdev_priv(dev); struct port_dcb_info *dcb = &pi->dcb; int dcb_type = pcmd->u.dcb.pgid.type; + int dcb_running_version; /* Handle Firmware DCB Control messages separately since they drive * our state machine. @@ -171,6 +219,25 @@ void cxgb4_dcb_handle_fw_update(struct adapter *adap, ? CXGB4_DCB_STATE_FW_ALLSYNCED : CXGB4_DCB_STATE_FW_INCOMPLETE); + if (dcb->dcb_version != FW_PORT_DCB_VER_UNKNOWN) { + dcb_running_version = FW_PORT_CMD_DCB_VERSION_GET( + be16_to_cpu( + pcmd->u.dcb.control.dcb_version_to_app_state)); + if (dcb_running_version == FW_PORT_DCB_VER_CEE1D01 || + dcb_running_version == FW_PORT_DCB_VER_IEEE) { + dcb->dcb_version = dcb_running_version; + dev_warn(adap->pdev_dev, "Interface %s is running %s\n", + dev->name, + dcb_ver_array[dcb->dcb_version]); + } else { + dev_warn(adap->pdev_dev, + "Something screwed up, requested firmware for %s, but firmware returned %s instead\n", + dcb_ver_array[dcb->dcb_version], + dcb_ver_array[dcb_running_version]); + dcb->dcb_version = FW_PORT_DCB_VER_UNKNOWN; + } + } + cxgb4_dcb_state_fsm(dev, input); return; } @@ -199,7 +266,11 @@ void cxgb4_dcb_handle_fw_update(struct adapter *adap, dcb->pg_num_tcs_supported = fwdcb->pgrate.num_tcs_supported; memcpy(dcb->pgrate, &fwdcb->pgrate.pgrate, sizeof(dcb->pgrate)); + memcpy(dcb->tsa, &fwdcb->pgrate.tsa, + sizeof(dcb->tsa)); dcb->msgs |= CXGB4_DCB_FW_PGRATE; + if (dcb->msgs & CXGB4_DCB_FW_PGID) + IEEE_FAUX_SYNC(dev, dcb); break; case FW_PORT_DCB_TYPE_PRIORATE: @@ -212,6 +283,7 @@ void cxgb4_dcb_handle_fw_update(struct adapter *adap, dcb->pfcen = fwdcb->pfc.pfcen; dcb->pfc_num_tcs_supported = fwdcb->pfc.max_pfc_tcs; dcb->msgs |= CXGB4_DCB_FW_PFC; + IEEE_FAUX_SYNC(dev, dcb); break; case FW_PORT_DCB_TYPE_APP_ID: { @@ -220,13 +292,25 @@ void cxgb4_dcb_handle_fw_update(struct adapter *adap, struct app_priority *ap = &dcb->app_priority[idx]; struct dcb_app app = { - .selector = fwap->sel_field, .protocol = be16_to_cpu(fwap->protocolid), - .priority = fwap->user_prio_map, }; int err; - err = dcb_setapp(dev, &app); + /* Convert from firmware format to relevant format + * when using app selector + */ + if (dcb->dcb_version == FW_PORT_DCB_VER_IEEE) { + app.selector = (fwap->sel_field + 1); + app.priority = ffs(fwap->user_prio_map) - 1; + err = dcb_ieee_setapp(dev, &app); + IEEE_FAUX_SYNC(dev, dcb); + } else { + /* Default is CEE */ + app.selector = !!(fwap->sel_field); + app.priority = fwap->user_prio_map; + err = dcb_setapp(dev, &app); + } + if (err) dev_err(adap->pdev_dev, "Failed DCB Set Application Priority: sel=%d, prot=%d, prio=%d, err=%d\n", @@ -408,9 +492,10 @@ static void cxgb4_getpgbwgcfg(struct net_device *dev, int pgid, u8 *bw_per, if (err != FW_PORT_DCB_CFG_SUCCESS) { dev_err(adap->pdev_dev, "DCB read PGRATE failed with %d\n", -err); - } else { - *bw_per = pcmd.u.dcb.pgrate.pgrate[pgid]; + return; } + + *bw_per = pcmd.u.dcb.pgrate.pgrate[pgid]; } static void cxgb4_getpgbwgcfg_tx(struct net_device *dev, int pgid, u8 *bw_per) @@ -637,7 +722,8 @@ static int __cxgb4_getapp(struct net_device *dev, u8 app_idtype, u16 app_id, return err; } if (be16_to_cpu(pcmd.u.dcb.app_priority.protocolid) == app_id) - return pcmd.u.dcb.app_priority.user_prio_map; + if (pcmd.u.dcb.app_priority.sel_field == app_idtype) + return pcmd.u.dcb.app_priority.user_prio_map; /* exhausted app list */ if (!pcmd.u.dcb.app_priority.protocolid) @@ -657,8 +743,8 @@ static int cxgb4_getapp(struct net_device *dev, u8 app_idtype, u16 app_id) /* Write a new Application User Priority Map for the specified Application ID */ -static int cxgb4_setapp(struct net_device *dev, u8 app_idtype, u16 app_id, - u8 app_prio) +static int __cxgb4_setapp(struct net_device *dev, u8 app_idtype, u16 app_id, + u8 app_prio) { struct fw_port_cmd pcmd; struct port_info *pi = netdev2pinfo(dev); @@ -673,10 +759,6 @@ static int cxgb4_setapp(struct net_device *dev, u8 app_idtype, u16 app_id, if (!netif_carrier_ok(dev)) return -ENOLINK; - if (app_idtype != DCB_APP_IDTYPE_ETHTYPE && - app_idtype != DCB_APP_IDTYPE_PORTNUM) - return -EINVAL; - for (i = 0; i < CXGB4_MAX_DCBX_APP_SUPPORTED; i++) { INIT_PORT_DCB_READ_LOCAL_CMD(pcmd, pi->port_id); pcmd.u.dcb.app_priority.type = FW_PORT_DCB_TYPE_APP_ID; @@ -725,6 +807,30 @@ static int cxgb4_setapp(struct net_device *dev, u8 app_idtype, u16 app_id, return 0; } +/* Priority for CEE inside dcb_app is bitmask, with 0 being an invalid value */ +static int cxgb4_setapp(struct net_device *dev, u8 app_idtype, u16 app_id, + u8 app_prio) +{ + int ret; + struct dcb_app app = { + .selector = app_idtype, + .protocol = app_id, + .priority = app_prio, + }; + + if (app_idtype != DCB_APP_IDTYPE_ETHTYPE && + app_idtype != DCB_APP_IDTYPE_PORTNUM) + return -EINVAL; + + /* Convert app_idtype to a format that firmware understands */ + ret = __cxgb4_setapp(dev, app_idtype == DCB_APP_IDTYPE_ETHTYPE ? + app_idtype : 3, app_id, app_prio); + if (ret) + return ret; + + return dcb_setapp(dev, &app); +} + /* Return whether IEEE Data Center Bridging has been negotiated. */ static inline int cxgb4_ieee_negotiation_complete(struct net_device *dev) @@ -738,6 +844,7 @@ static inline int cxgb4_ieee_negotiation_complete(struct net_device *dev) /* Fill in the Application User Priority Map associated with the * specified Application. + * Priority for IEEE dcb_app is an integer, with 0 being a valid value */ static int cxgb4_ieee_getapp(struct net_device *dev, struct dcb_app *app) { @@ -748,28 +855,39 @@ static int cxgb4_ieee_getapp(struct net_device *dev, struct dcb_app *app) if (!(app->selector && app->protocol)) return -EINVAL; - prio = dcb_getapp(dev, app); - if (prio == 0) { - /* If app doesn't exist in dcb_app table, try firmware - * directly. - */ - prio = __cxgb4_getapp(dev, app->selector, app->protocol, 0); - } + /* Try querying firmware first, use firmware format */ + prio = __cxgb4_getapp(dev, app->selector - 1, app->protocol, 0); + + if (prio < 0) + prio = dcb_ieee_getapp_mask(dev, app); - app->priority = prio; + app->priority = ffs(prio) - 1; return 0; } -/* Write a new Application User Priority Map for the specified App id. */ +/* Write a new Application User Priority Map for the specified Application ID. + * Priority for IEEE dcb_app is an integer, with 0 being a valid value + */ static int cxgb4_ieee_setapp(struct net_device *dev, struct dcb_app *app) { + int ret; + if (!cxgb4_ieee_negotiation_complete(dev)) return -EINVAL; - if (!(app->selector && app->protocol && app->priority)) + if (!(app->selector && app->protocol)) + return -EINVAL; + + if (!(app->selector > IEEE_8021QAZ_APP_SEL_ETHERTYPE && + app->selector < IEEE_8021QAZ_APP_SEL_ANY)) return -EINVAL; - cxgb4_setapp(dev, app->selector, app->protocol, app->priority); - return dcb_setapp(dev, app); + /* change selector to a format that firmware understands */ + ret = __cxgb4_setapp(dev, app->selector - 1, app->protocol, + (1 << app->priority)); + if (ret) + return ret; + + return dcb_ieee_setapp(dev, app); } /* Return our DCBX parameters. @@ -794,8 +912,9 @@ static u8 cxgb4_setdcbx(struct net_device *dev, u8 dcb_request) != dcb_request) return 1; - /* Can't set DCBX capabilities if DCBX isn't enabled. */ - if (!pi->dcb.state) + /* Can't enable DCB if we haven't successfully negotiated it. + */ + if (pi->dcb.state != CXGB4_DCB_STATE_FW_ALLSYNCED) return 1; /* There's currently no mechanism to allow for the firmware DCBX @@ -874,7 +993,8 @@ static int cxgb4_getpeerapp_tbl(struct net_device *dev, struct dcb_app *table) table[i].selector = pcmd.u.dcb.app_priority.sel_field; table[i].protocol = be16_to_cpu(pcmd.u.dcb.app_priority.protocolid); - table[i].priority = pcmd.u.dcb.app_priority.user_prio_map; + table[i].priority = + ffs(pcmd.u.dcb.app_priority.user_prio_map) - 1; } return err; } |