diff options
Diffstat (limited to 'Documentation/devicetree')
486 files changed, 11151 insertions, 2302 deletions
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 274ee0890312..08d59842655c 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/arm/amlogic.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Amlogic MesonX +title: Amlogic SoC based Platforms maintainers: - Kevin Hilman <khilman@baylibre.com> @@ -205,6 +205,13 @@ properties: - amlogic,ad401 - const: amlogic,a1 + - description: Boards with the Amlogic C3 C302X/C308L SoC + items: + - enum: + - amlogic,aw409 + - amlogic,aw419 + - const: amlogic,c3 + - description: Boards with the Amlogic Meson S4 S805X2 SoC items: - enum: diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml new file mode 100644 index 000000000000..cb78cfa56702 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,coresight-dummy-sink.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Coresight Dummy sink component + +description: | + CoreSight components are compliant with the ARM CoreSight architecture + specification and can be connected in various topologies to suit a particular + SoCs tracing needs. These trace components can generally be classified as + sinks, links and sources. Trace data produced by one or more sources flows + through the intermediate links connecting the source to the currently selected + sink. + + The Coresight dummy sink component is for the specific coresight sink devices + kernel don't have permission to access or configure, e.g., CoreSight EUD on + Qualcomm platforms. It is a mini-USB hub implemented to support the USB-based + debug and trace capabilities. For this device, a dummy driver is needed to + register it as Coresight sink device in kernel side, so that path can be + created in the driver. Then the trace flow would be transferred to EUD via + coresight link of AP processor. It provides Coresight API for operations on + dummy source devices, such as enabling and disabling them. It also provides + the Coresight dummy source paths for debugging. + + The primary use case of the coresight dummy sink is to build path in kernel + side for dummy sink component. + +maintainers: + - Mike Leach <mike.leach@linaro.org> + - Suzuki K Poulose <suzuki.poulose@arm.com> + - James Clark <james.clark@arm.com> + - Mao Jinlong <quic_jinlmao@quicinc.com> + - Hao Zhang <quic_hazha@quicinc.com> + +properties: + compatible: + enum: + - arm,coresight-dummy-sink + + in-ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port: + description: Input connection from the Coresight Trace bus to + dummy sink, such as Embedded USB debugger(EUD). + + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - in-ports + +additionalProperties: false + +examples: + # Minimum dummy sink definition. Dummy sink connect to coresight replicator. + - | + sink { + compatible = "arm,coresight-dummy-sink"; + + in-ports { + port { + eud_in_replicator_swao: endpoint { + remote-endpoint = <&replicator_swao_out_eud>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml new file mode 100644 index 000000000000..5fedaed49a1f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,coresight-dummy-source.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Coresight Dummy source component + +description: | + CoreSight components are compliant with the ARM CoreSight architecture + specification and can be connected in various topologies to suit a particular + SoCs tracing needs. These trace components can generally be classified as + sinks, links and sources. Trace data produced by one or more sources flows + through the intermediate links connecting the source to the currently selected + sink. + + The Coresight dummy source component is for the specific coresight source + devices kernel don't have permission to access or configure. For some SOCs, + there would be Coresight source trace components on sub-processor which + are conneted to AP processor via debug bus. For these devices, a dummy driver + is needed to register them as Coresight source devices, so that paths can be + created in the driver. It provides Coresight API for operations on dummy + source devices, such as enabling and disabling them. It also provides the + Coresight dummy source paths for debugging. + + The primary use case of the coresight dummy source is to build path in kernel + side for dummy source component. + +maintainers: + - Mike Leach <mike.leach@linaro.org> + - Suzuki K Poulose <suzuki.poulose@arm.com> + - James Clark <james.clark@arm.com> + - Mao Jinlong <quic_jinlmao@quicinc.com> + - Hao Zhang <quic_hazha@quicinc.com> + +properties: + compatible: + enum: + - arm,coresight-dummy-source + + out-ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port: + description: Output connection from the source to Coresight + Trace bus. + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - out-ports + +additionalProperties: false + +examples: + # Minimum dummy source definition. Dummy source connect to coresight funnel. + - | + source { + compatible = "arm,coresight-dummy-source"; + + out-ports { + port { + dummy_riscv_out_funnel_swao: endpoint { + remote-endpoint = <&funnel_swao_in_dummy_riscv>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml index 09c319f803ba..cdd65881fcdd 100644 --- a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml +++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml @@ -122,14 +122,14 @@ properties: arm,vexpress,position: description: When daughterboards are stacked on one site, their position in the stack be be described this attribute. - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3 arm,vexpress,dcc: description: When describing tiles consisting of more than one DCC, its number can be specified with this attribute. - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3 @@ -180,13 +180,13 @@ patternProperties: - const: simple-bus arm,v2m-memory-map: description: This describes the memory map type. - $ref: '/schemas/types.yaml#/definitions/string' + $ref: /schemas/types.yaml#/definitions/string enum: - rs1 - rs2 arm,hbi: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: This indicates the ARM HBI (Hardware Board ID), this is ARM's unique board model ID, visible on the PCB's silkscreen. @@ -197,7 +197,7 @@ patternProperties: property, describing the physical location of the children nodes. 0 means motherboard site, while 1 and 2 are daughterboard sites, and 0xf means "sisterboard" which is the site containing the main CPU tile. - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 15 diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt index ab1b352344ae..67a66bf74895 100644 --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt @@ -52,100 +52,6 @@ Example: reg = <0xe3804000 0x1000>; }; -SHDWC Shutdown Controller - -required properties: -- compatible: Should be "atmel,<chip>-shdwc". - <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5". -- reg: Should contain registers location and length -- clocks: phandle to input clock. - -optional properties: -- atmel,wakeup-mode: String, operation mode of the wakeup mode. - Supported values are: "none", "high", "low", "any". -- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf). - -optional at91sam9260 properties: -- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up. - -optional at91sam9rl properties: -- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up. -- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up. - -optional at91sam9x5 properties: -- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up. - -Example: - - shdwc@fffffd10 { - compatible = "atmel,at91sam9260-shdwc"; - reg = <0xfffffd10 0x10>; - clocks = <&clk32k>; - }; - -SHDWC SAMA5D2-Compatible Shutdown Controller - -1) shdwc node - -required properties: -- compatible: should be "atmel,sama5d2-shdwc", "microchip,sam9x60-shdwc" or - "microchip,sama7g5-shdwc" -- reg: should contain registers location and length -- clocks: phandle to input clock. -- #address-cells: should be one. The cell is the wake-up input index. -- #size-cells: should be zero. - -optional properties: - -- debounce-delay-us: minimum wake-up inputs debouncer period in - microseconds. It's usually a board-related property. -- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up. - -optional microchip,sam9x60-shdwc or microchip,sama7g5-shdwc properties: -- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up. - -The node contains child nodes for each wake-up input that the platform uses. - -2) input nodes - -Wake-up input nodes are usually described in the "board" part of the Device -Tree. Note also that input 0 is linked to the wake-up pin and is frequently -used. - -Required properties: -- reg: should contain the wake-up input index [0 - 15]. - -Optional properties: -- atmel,wakeup-active-high: boolean, the corresponding wake-up input described - by the child, forces the wake-up of the core power supply on a high level. - The default is to be active low. - -Example: - -On the SoC side: - shdwc@f8048010 { - compatible = "atmel,sama5d2-shdwc"; - reg = <0xf8048010 0x10>; - clocks = <&clk32k>; - #address-cells = <1>; - #size-cells = <0>; - atmel,wakeup-rtc-timer; - }; - -On the board side: - shdwc@f8048010 { - debounce-delay-us = <976>; - - input@0 { - reg = <0>; - }; - - input@1 { - reg = <1>; - atmel,wakeup-active-high; - }; - }; - Special Function Registers (SFR) Special Function Registers (SFR) manage specific aspects of the integrated diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml index 454b0e93245d..5c3ac97e8728 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml @@ -25,13 +25,15 @@ properties: - enum: - asus,rt-ac56u - asus,rt-ac68u + - buffalo,wzr-1166dhp + - buffalo,wzr-1166dhp2 - buffalo,wzr-1750dhp - linksys,ea6300-v1 - linksys,ea6500-v2 - - luxul,xap-1510v1 + - luxul,xap-1510-v1 - luxul,xwc-1000 - - netgear,r6250v1 - - netgear,r6300v2 + - netgear,r6250-v1 + - netgear,r6300-v2 - smartrg,sr400ac - brcm,bcm94708 - const: brcm,bcm4708 @@ -42,8 +44,8 @@ properties: - asus,rt-n18u - buffalo,wzr-600dhp2 - buffalo,wzr-900dhp - - luxul,xap-1410v1 - - luxul,xwr-1200v1 + - luxul,xap-1410-v1 + - luxul,xwr-1200-v1 - tplink,archer-c5-v2 - const: brcm,bcm47081 - const: brcm,bcm4708 @@ -72,7 +74,7 @@ properties: - luxul,xap-1610-v1 - luxul,xbr-4500-v1 - luxul,xwc-2000-v1 - - luxul,xwr-3100v1 + - luxul,xwr-3100-v1 - luxul,xwr-3150-v1 - netgear,r8500 - phicomm,k3 diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index ff272e517d57..9e6a45eea4e5 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -153,6 +153,7 @@ properties: - arm,cortex-r4 - arm,cortex-r5 - arm,cortex-r7 + - arm,cortex-r52 - arm,cortex-x1 - arm,cortex-x1c - arm,cortex-x2 @@ -196,7 +197,7 @@ properties: - qcom,scorpion enable-method: - $ref: '/schemas/types.yaml#/definitions/string' + $ref: /schemas/types.yaml#/definitions/string oneOf: # On ARM v8 64-bit this property is required - enum: @@ -245,8 +246,8 @@ properties: cpu-release-addr: oneOf: - - $ref: '/schemas/types.yaml#/definitions/uint32' - - $ref: '/schemas/types.yaml#/definitions/uint64' + - $ref: /schemas/types.yaml#/definitions/uint32 + - $ref: /schemas/types.yaml#/definitions/uint64 description: The DT specification defines this as 64-bit always, but some 32-bit Arm systems have used a 32-bit value which must be supported. @@ -254,7 +255,7 @@ properties: property value of "spin-table". cpu-idle-states: - $ref: '/schemas/types.yaml#/definitions/phandle-array' + $ref: /schemas/types.yaml#/definitions/phandle-array items: maxItems: 1 description: | @@ -270,7 +271,7 @@ properties: cci-control-port: true dynamic-power-coefficient: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: A u32 value that represents the running time dynamic power coefficient in units of uW/MHz/V^2. The @@ -307,7 +308,7 @@ properties: PM domain provider, must be "psci". qcom,saw: - $ref: '/schemas/types.yaml#/definitions/phandle' + $ref: /schemas/types.yaml#/definitions/phandle description: | Specifies the SAW* node associated with this CPU. @@ -317,7 +318,7 @@ properties: * arm/msm/qcom,saw2.txt qcom,acc: - $ref: '/schemas/types.yaml#/definitions/phandle' + $ref: /schemas/types.yaml#/definitions/phandle description: | Specifies the ACC* node associated with this CPU. @@ -328,7 +329,7 @@ properties: * arm/msm/qcom,kpss-acc.txt rockchip,pmu: - $ref: '/schemas/types.yaml#/definitions/phandle' + $ref: /schemas/types.yaml#/definitions/phandle description: | Specifies the syscon node controlling the cpu core power domains. @@ -338,7 +339,7 @@ properties: the cpu-core power-domains. secondary-boot-reg: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: | Required for systems that have an "enable-method" property value of "brcm,bcm11351-cpu-method", "brcm,bcm23550" or "brcm,bcm-nsp-smp". diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 15d411084065..2510eaa8906d 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -726,6 +726,12 @@ properties: - const: dh,imx6ull-dhcor-som - const: fsl,imx6ull + - description: i.MX6ULL DHCOR SoM based Boards + items: + - const: marantec,imx6ull-dhcor-maveo-box + - const: dh,imx6ull-dhcor-som + - const: fsl,imx6ull + - description: i.MX6ULL PHYTEC phyBOARD-Segin items: - enum: @@ -901,6 +907,7 @@ properties: - emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base - fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board - fsl,imx8mm-evk # i.MX8MM EVK Board + - fsl,imx8mm-evkb # i.MX8MM EVKB Board - gateworks,imx8mm-gw7904 - gw,imx8mm-gw71xx-0x # i.MX8MM Gateworks Development Kit - gw,imx8mm-gw72xx-0x # i.MX8MM Gateworks Development Kit @@ -918,6 +925,12 @@ properties: - prt,prt8mm # i.MX8MM Protonic PRT8MM Board - const: fsl,imx8mm + - description: Emtop i.MX8MM based Boards + items: + - const: ees,imx8mm-emtop-baseboard # i.MX8MM Emtop SoM on i.MX8M Mini Baseboard V1 + - const: ees,imx8mm-emtop-som # i.MX8MM Emtop SOM-IMX8MMLPD4 module + - const: fsl,imx8mm + - description: Engicam i.Core MX8M Mini SoM based boards items: - enum: @@ -1019,6 +1032,7 @@ properties: - dmo,imx8mp-data-modul-edm-sbc # i.MX8MP eDM SBC - fsl,imx8mp-evk # i.MX8MP EVK Board - gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board + - gateworks,imx8mp-gw7905-2x # i.MX8MP Gateworks Board - polyhex,imx8mp-debix # Polyhex Debix boards - polyhex,imx8mp-debix-model-a # Polyhex Debix Model A Board - toradex,verdin-imx8mp # Verdin iMX8M Plus Modules diff --git a/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,ma35d1.yaml b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,ma35d1.yaml new file mode 100644 index 000000000000..fb190db61525 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,ma35d1.yaml @@ -0,0 +1,30 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/nuvoton/nuvoton,ma35d1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton MA35 series SoC based platforms + +maintainers: + - Jacky Huang <ychuang3@nuvoton.com> + +description: | + Boards with an ARMv8 based Nuvoton MA35 series SoC shall have + the following properties. + +properties: + $nodename: + const: '/' + compatible: + oneOf: + + - description: MA35D1 based boards + items: + - enum: + - nuvoton,ma35d1-iot + - nuvoton,ma35d1-som + - const: nuvoton,ma35d1 + +additionalProperties: true +... diff --git a/Documentation/devicetree/bindings/arm/npcm/npcm.yaml b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,npcm.yaml index 6871483947c5..d386744c8815 100644 --- a/Documentation/devicetree/bindings/arm/npcm/npcm.yaml +++ b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,npcm.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- -$id: http://devicetree.org/schemas/arm/npcm/npcm.yaml# +$id: http://devicetree.org/schemas/arm/nuvoton/nuvoton,npcm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: NPCM Platforms diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml index 3a2c908ff282..0c5381e081bd 100644 --- a/Documentation/devicetree/bindings/arm/psci.yaml +++ b/Documentation/devicetree/bindings/arm/psci.yaml @@ -100,7 +100,7 @@ properties: patternProperties: "^power-domain-": - $ref: "../power/power-domain.yaml#" + $ref: /schemas/power/power-domain.yaml# type: object description: | diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index d9dd25695c3d..450f616774e0 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -40,6 +40,7 @@ description: | msm8939 msm8953 msm8956 + msm8960 msm8974 msm8976 msm8992 @@ -69,6 +70,7 @@ description: | sdm845 sdx55 sdx65 + sdx75 sm4250 sm6115 sm6115p @@ -85,9 +87,15 @@ description: | The 'board' element must be one of the following strings: adp + ap-al02-c2 + ap-al02-c6 ap-al02-c7 + ap-al02-c8 + ap-al02-c9 ap-mi01.2 + ap-mi01.3 ap-mi01.6 + ap-mi01.9 cdp cp01-c1 dragonboard @@ -191,6 +199,7 @@ properties: - items: - enum: - qcom,msm8960-cdp + - samsung,expressatt - const: qcom,msm8960 - items: @@ -333,7 +342,9 @@ properties: - items: - enum: - qcom,ipq5332-ap-mi01.2 + - qcom,ipq5332-ap-mi01.3 - qcom,ipq5332-ap-mi01.6 + - qcom,ipq5332-ap-mi01.9 - const: qcom,ipq5332 - items: @@ -351,7 +362,11 @@ properties: - items: - enum: + - qcom,ipq9574-ap-al02-c2 + - qcom,ipq9574-ap-al02-c6 - qcom,ipq9574-ap-al02-c7 + - qcom,ipq9574-ap-al02-c8 + - qcom,ipq9574-ap-al02-c9 - const: qcom,ipq9574 - description: Sierra Wireless MangOH Green with WP8548 Module @@ -380,9 +395,9 @@ properties: - qcom,qru1000-idp - const: qcom,qru1000 - - description: Qualcomm Technologies, Inc. SC7180 IDP - items: + - items: - enum: + - acer,aspire1 - qcom,sc7180-idp - const: qcom,sc7180 @@ -821,6 +836,11 @@ properties: - items: - enum: + - qcom,sdx75-idp + - const: qcom,sdx75 + + - items: + - enum: - qcom,ipq6018-cp01 - qcom,ipq6018-cp01-c1 - const: qcom,ipq6018 @@ -884,6 +904,11 @@ properties: - items: - enum: + - fxtec,pro1x + - const: qcom,sm6115 + + - items: + - enum: - lenovo,j606f - const: qcom,sm6115p - const: qcom,sm6115 @@ -1042,6 +1067,7 @@ allOf: - qcom,sdm845 - qcom,sdx55 - qcom,sdx65 + - qcom,sdx75 - qcom,sm4250 - qcom,sm6115 - qcom,sm6125 diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index ec141c937b8b..ecdb72a519cb 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -40,6 +40,11 @@ properties: - const: anbernic,rg353p - const: rockchip,rk3566 + - description: Anbernic RG353PS + items: + - const: anbernic,rg353ps + - const: rockchip,rk3566 + - description: Anbernic RG353V items: - const: anbernic,rg353v @@ -102,6 +107,12 @@ properties: - const: edgeble,neural-compute-module-6a # Edgeble Neural Compute Module 6A SoM - const: rockchip,rk3588 + - description: Edgeble Neural Compute Module 6(Neu6) Model B SoM based boards + items: + - const: edgeble,neural-compute-module-6b-io # Edgeble Neural Compute Module 6B IO Board + - const: edgeble,neural-compute-module-6b # Edgeble Neural Compute Module 6B SoM + - const: rockchip,rk3588 + - description: Elgin RV1108 R1 items: - const: elgin,rv1108-r1 @@ -189,6 +200,7 @@ properties: items: - enum: - friendlyarm,nanopi-r2c + - friendlyarm,nanopi-r2c-plus - friendlyarm,nanopi-r2s - const: rockchip,rk3328 @@ -534,6 +546,11 @@ properties: - const: hugsun,x99 - const: rockchip,rk3399 + - description: Indiedroid Nova SBC + items: + - const: indiedroid,nova + - const: rockchip,rk3588s + - description: Khadas Edge series boards items: - enum: @@ -562,6 +579,13 @@ properties: - const: leez,p710 - const: rockchip,rk3399 + - description: Lunzn FastRhino R66S / R68S + items: + - enum: + - lunzn,fastrhino-r66s + - lunzn,fastrhino-r68s + - const: rockchip,rk3568 + - description: mqmaker MiQi items: - const: mqmaker,miqi diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml index deb2cf971871..e3ffd8159ab6 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml @@ -72,6 +72,16 @@ properties: - const: samsung,exynos4210 - const: samsung,exynos4 + - description: Samsung Galaxy Tab3 family boards + items: + - enum: + - samsung,t310 # Samsung Galaxy Tab 3 8.0 WiFi (SM-T310) + - samsung,t311 # Samsung Galaxy Tab 3 8.0 3G (SM-T311) + - samsung,t315 # Samsung Galaxy Tab 3 8.0 LTE (SM-T315) + - const: samsung,tab3 + - const: samsung,exynos4212 + - const: samsung,exynos4 + - description: Exynos4412 based boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/socionext/synquacer.yaml b/Documentation/devicetree/bindings/arm/socionext/synquacer.yaml new file mode 100644 index 000000000000..72554a4f1c92 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/socionext/synquacer.yaml @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/socionext/synquacer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext Synquacer platform + +maintainers: + - Masahisa Kojima <masahisa.kojima@linaro.org> + - Jassi Brar <jaswinder.singh@linaro.org> + +description: + Socionext SC2A11B (Synquacer) SoC based boards + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - items: + - enum: + - socionext,developer-box + - const: socionext,synquacer + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml index ad8e51aa01b0..b63ff591ef8f 100644 --- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml @@ -15,12 +15,13 @@ properties: oneOf: - items: - enum: - - st,stm32mp157-syscfg - - st,stm32mp151-pwr-mcu - - st,stm32-syscfg - st,stm32-power-config + - st,stm32-syscfg - st,stm32-tamp - st,stm32f4-gcan + - st,stm32mp151-pwr-mcu + - st,stm32mp157-syscfg + - st,stm32mp25-syscfg - const: syscon - items: - const: st,stm32-tamp diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index 13e34241145b..4466b455bffa 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -155,6 +155,18 @@ properties: - const: seeed,stm32mp157c-odyssey-som - const: st,stm32mp157 + - description: Phytec STM32MP1 SoM based Boards + items: + - const: phytec,phycore-stm32mp1-3 + - const: phytec,phycore-stm32mp157c-som + - const: st,stm32mp157 + + - description: ST STM32MP257 based Boards + items: + - enum: + - st,stm32mp257f-ev1 + - const: st,stm32mp257 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 013821f4a7b8..ee8fdd2da869 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -305,6 +305,12 @@ properties: - const: allwinner,i12-tvbox - const: allwinner,sun7i-a20 + - description: ICnova A20 ADB4006 + items: + - const: incircuit,icnova-a20-adb4006 + - const: incircuit,icnova-a20 + - const: allwinner,sun7i-a20 + - description: ICNova A20 SWAC items: - const: incircuit,icnova-a20-swac diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml index 0df41f5b7e2a..fcf956406168 100644 --- a/Documentation/devicetree/bindings/arm/tegra.yaml +++ b/Documentation/devicetree/bindings/arm/tegra.yaml @@ -167,6 +167,11 @@ properties: - const: nvidia,p3737-0000+p3701-0000 - const: nvidia,p3701-0000 - const: nvidia,tegra234 + - description: NVIDIA IGX Orin Development Kit + items: + - const: nvidia,p3740-0002+p3701-0008 + - const: nvidia,p3701-0008 + - const: nvidia,tegra234 - description: Jetson Orin NX items: - const: nvidia,p3767-0000 @@ -176,5 +181,14 @@ properties: - const: nvidia,p3768-0000+p3767-0000 - const: nvidia,p3767-0000 - const: nvidia,tegra234 + - description: Jetson Orin Nano + items: + - const: nvidia,p3767-0005 + - const: nvidia,tegra234 + - description: Jetson Orin Nano Developer Kit + items: + - const: nvidia,p3768-0000+p3767-0005 + - const: nvidia,p3767-0005 + - const: nvidia,tegra234 additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml index e1183f90bb06..577eee95c893 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml @@ -25,6 +25,12 @@ properties: - ti,am62a7-sk - const: ti,am62a7 + - description: K3 AM625 SoC PHYTEC phyBOARD-Lyra + items: + - const: phytec,am625-phyboard-lyra-rdk + - const: phytec,am62-phycore-som + - const: ti,am625 + - description: K3 AM625 SoC items: - enum: @@ -33,6 +39,26 @@ properties: - ti,am62-lp-sk - const: ti,am625 + - description: K3 AM62x SoC Toradex Verdin Modules and Carrier Boards + items: + - enum: + - toradex,verdin-am62-nonwifi-dahlia # Verdin AM62 Module on Dahlia + - toradex,verdin-am62-nonwifi-dev # Verdin AM62 Module on Verdin Development Board + - toradex,verdin-am62-nonwifi-yavia # Verdin AM62 Module on Yavia + - const: toradex,verdin-am62-nonwifi # Verdin AM62 Module without Wi-Fi / BT + - const: toradex,verdin-am62 # Verdin AM62 Module + - const: ti,am625 + + - description: K3 AM62x SoC Toradex Verdin Modules and Carrier Boards with Wi-Fi / BT + items: + - enum: + - toradex,verdin-am62-wifi-dahlia # Verdin AM62 Wi-Fi / BT Module on Dahlia + - toradex,verdin-am62-wifi-dev # Verdin AM62 Wi-Fi / BT M. on Verdin Development B. + - toradex,verdin-am62-wifi-yavia # Verdin AM62 Wi-Fi / BT Module on Yavia + - const: toradex,verdin-am62-wifi # Verdin AM62 Wi-Fi / BT Module + - const: toradex,verdin-am62 # Verdin AM62 Module + - const: ti,am625 + - description: K3 AM642 SoC items: - enum: diff --git a/Documentation/devicetree/bindings/arm/xen.txt b/Documentation/devicetree/bindings/arm/xen.txt index 61d77acbeb5e..f925290d4641 100644 --- a/Documentation/devicetree/bindings/arm/xen.txt +++ b/Documentation/devicetree/bindings/arm/xen.txt @@ -56,7 +56,7 @@ hypervisor { }; The format and meaning of the "xen,uefi-*" parameters are similar to those in -Documentation/arm/uefi.rst, which are provided by the regular UEFI stub. However +Documentation/arch/arm/uefi.rst, which are provided by the regular UEFI stub. However they differ because they are provided by the Xen hypervisor, together with a set of UEFI runtime services implemented via hypercalls, see http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,platform.h.html. diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/arm/xilinx.yaml index 969cfe6dc434..f57ed0347894 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.yaml +++ b/Documentation/devicetree/bindings/arm/xilinx.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Zynq Platforms maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> description: | Xilinx boards with Zynq-7000 SOC or Zynq UltraScale+ MPSoC @@ -61,10 +61,10 @@ properties: - const: xlnx,zynqmp-zc1254 - const: xlnx,zynqmp - - description: Xilinx internal board zc1275 + - description: Xilinx evaluation board zcu1275 items: - - const: xlnx,zynqmp-zc1275-revA - - const: xlnx,zynqmp-zc1275 + - const: xlnx,zynqmp-zcu1275-revA + - const: xlnx,zynqmp-zcu1275 - const: xlnx,zynqmp - description: Xilinx 96boards compatible board zcu100 diff --git a/Documentation/devicetree/bindings/ata/ahci-common.yaml b/Documentation/devicetree/bindings/ata/ahci-common.yaml index 7fdf40954a4c..38770c4c85fd 100644 --- a/Documentation/devicetree/bindings/ata/ahci-common.yaml +++ b/Documentation/devicetree/bindings/ata/ahci-common.yaml @@ -8,7 +8,7 @@ title: Common Properties for Serial ATA AHCI controllers maintainers: - Hans de Goede <hdegoede@redhat.com> - - Damien Le Moal <damien.lemoal@opensource.wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: This document defines device tree properties for a common AHCI SATA diff --git a/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml index 9b31f864e071..b29ce598f9aa 100644 --- a/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml +++ b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Ceva AHCI SATA Controller maintainers: - - Piyush Mehta <piyush.mehta@xilinx.com> + - Piyush Mehta <piyush.mehta@amd.com> description: | The Ceva SATA controller mostly conforms to the AHCI interface with some @@ -32,7 +32,7 @@ properties: maxItems: 1 iommus: - maxItems: 1 + maxItems: 4 power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml new file mode 100644 index 000000000000..b5e5767d8698 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/rockchip,dwc-ahci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DWC AHCI SATA controller for Rockchip devices + +maintainers: + - Serge Semin <fancer.lancer@gmail.com> + +description: + This document defines device tree bindings for the Synopsys DWC + implementation of the AHCI SATA controller found in Rockchip + devices. + +select: + properties: + compatible: + contains: + enum: + - rockchip,rk3568-dwc-ahci + - rockchip,rk3588-dwc-ahci + required: + - compatible + +properties: + compatible: + items: + - enum: + - rockchip,rk3568-dwc-ahci + - rockchip,rk3588-dwc-ahci + - const: snps,dwc-ahci + + ports-implemented: + const: 1 + + sata-port@0: + $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port + + properties: + reg: + const: 0 + + unevaluatedProperties: false + +patternProperties: + "^sata-port@[1-9a-e]$": false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - ports-implemented + +allOf: + - $ref: snps,dwc-ahci-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - rockchip,rk3588-dwc-ahci + then: + properties: + clocks: + maxItems: 5 + clock-names: + items: + - const: sata + - const: pmalive + - const: rxoob + - const: ref + - const: asic + - if: + properties: + compatible: + contains: + enum: + - rockchip,rk3568-dwc-ahci + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: sata + - const: pmalive + - const: rxoob + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/rockchip,rk3588-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/ata/ahci.h> + #include <dt-bindings/phy/phy.h> + + sata@fe210000 { + compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci"; + reg = <0xfe210000 0x1000>; + clocks = <&cru ACLK_SATA0>, <&cru CLK_PMALIVE0>, + <&cru CLK_RXOOB0>, <&cru CLK_PIPEPHY0_REF>, + <&cru CLK_PIPEPHY0_PIPE_ASIC_G>; + clock-names = "sata", "pmalive", "rxoob", "ref", "asic"; + interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH 0>; + ports-implemented = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + + sata-port@0 { + reg = <0>; + hba-port-cap = <HBA_PORT_FBSCP>; + phys = <&combphy0_ps PHY_TYPE_SATA>; + phy-names = "sata-phy"; + snps,rx-ts-max = <32>; + snps,tx-ts-max = <32>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml index c1457910520b..34c5bf65b02d 100644 --- a/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml +++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml @@ -31,11 +31,11 @@ properties: PM-alive clock, RxOOB detection clock, embedded PHYs reference (Rx/Tx) clock, etc. minItems: 1 - maxItems: 4 + maxItems: 6 clock-names: minItems: 1 - maxItems: 4 + maxItems: 6 items: oneOf: - description: Application APB/AHB/AXI BIU clock @@ -48,6 +48,10 @@ properties: const: pmalive - description: RxOOB detection clock const: rxoob + - description: PHY Transmit Clock + const: asic + - description: PHY Receive Clock + const: rbc - description: SATA Ports reference clock const: ref diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml index 5afa4b57ce20..4c848fcb5a5d 100644 --- a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml +++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml @@ -13,6 +13,15 @@ description: This document defines device tree bindings for the generic Synopsys DWC implementation of the AHCI SATA controller. +select: + properties: + compatible: + enum: + - snps,dwc-ahci + - snps,spear-ahci + required: + - compatible + allOf: - $ref: snps,dwc-ahci-common.yaml# @@ -23,10 +32,6 @@ properties: const: snps,dwc-ahci - description: SPEAr1340 AHCI SATA device const: snps,spear-ahci - - description: Rockhip RK3568 AHCI controller - items: - - const: rockchip,rk3568-dwc-ahci - - const: snps,dwc-ahci patternProperties: "^sata-port@[0-9a-e]$": diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml index 49304a1476ab..be95f6b97b41 100644 --- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml +++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml @@ -40,6 +40,7 @@ properties: linux,keymap: true linux,no-autorepeat: + type: boolean description: Disable keyrepeat default-brightness-level: diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.yaml b/Documentation/devicetree/bindings/bus/ti-sysc.yaml index f089634f9466..6d7bca6c138e 100644 --- a/Documentation/devicetree/bindings/bus/ti-sysc.yaml +++ b/Documentation/devicetree/bindings/bus/ti-sysc.yaml @@ -97,7 +97,7 @@ properties: - enum: [ ick, fck, sys_clk ] - items: - const: fck - - enum: [ ick. dbclk, osc, sys_clk, dss_clk, ahclkx ] + - enum: [ ick, dbclk, osc, sys_clk, dss_clk, ahclkx ] - items: - const: fck - const: phy-clk diff --git a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml index d8b91944180a..44892aa589fd 100644 --- a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml +++ b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml @@ -129,6 +129,7 @@ allOf: - qcom,sm8250-llcc - qcom,sm8350-llcc - qcom,sm8450-llcc + - qcom,sm8550-llcc then: properties: reg: diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml new file mode 100644 index 000000000000..6d84cee1bd75 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,a1-peripherals-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic A1 Peripherals Clock Control Unit + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + - Jerome Brunet <jbrunet@baylibre.com> + - Jian Hu <jian.hu@jian.hu.com> + - Dmitry Rokosov <ddrokosov@sberdevices.ru> + +properties: + compatible: + const: amlogic,a1-peripherals-clkc + + '#clock-cells': + const: 1 + + reg: + maxItems: 1 + + clocks: + items: + - description: input fixed pll div2 + - description: input fixed pll div3 + - description: input fixed pll div5 + - description: input fixed pll div7 + - description: input hifi pll + - description: input oscillator (usually at 24MHz) + + clock-names: + items: + - const: fclk_div2 + - const: fclk_div3 + - const: fclk_div5 + - const: fclk_div7 + - const: hifi_pll + - const: xtal + +required: + - compatible + - '#clock-cells' + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/amlogic,a1-pll-clkc.h> + apb { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@800 { + compatible = "amlogic,a1-peripherals-clkc"; + reg = <0 0x800 0 0x104>; + #clock-cells = <1>; + clocks = <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_DIV3>, + <&clkc_pll CLKID_FCLK_DIV5>, + <&clkc_pll CLKID_FCLK_DIV7>, + <&clkc_pll CLKID_HIFI_PLL>, + <&xtal>; + clock-names = "fclk_div2", "fclk_div3", + "fclk_div5", "fclk_div7", + "hifi_pll", "xtal"; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml new file mode 100644 index 000000000000..a59b188a8bf5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,a1-pll-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic A1 PLL Clock Control Unit + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + - Jerome Brunet <jbrunet@baylibre.com> + - Jian Hu <jian.hu@jian.hu.com> + - Dmitry Rokosov <ddrokosov@sberdevices.ru> + +properties: + compatible: + const: amlogic,a1-pll-clkc + + '#clock-cells': + const: 1 + + reg: + maxItems: 1 + + clocks: + items: + - description: input fixpll_in + - description: input hifipll_in + + clock-names: + items: + - const: fixpll_in + - const: hifipll_in + +required: + - compatible + - '#clock-cells' + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h> + apb { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@7c80 { + compatible = "amlogic,a1-pll-clkc"; + reg = <0 0x7c80 0 0x18c>; + #clock-cells = <1>; + clocks = <&clkc_periphs CLKID_FIXPLL_IN>, + <&clkc_periphs CLKID_HIFIPLL_IN>; + clock-names = "fixpll_in", "hifipll_in"; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt deleted file mode 100644 index 13f45db3b66d..000000000000 --- a/Documentation/devicetree/bindings/clock/at91-clock.txt +++ /dev/null @@ -1,58 +0,0 @@ -Device Tree Clock bindings for arch-at91 - -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Slow Clock controller: - -Required properties: -- compatible : shall be one of the following: - "atmel,at91sam9x5-sckc", - "atmel,sama5d3-sckc", - "atmel,sama5d4-sckc" or - "microchip,sam9x60-sckc": - at91 SCKC (Slow Clock Controller) -- #clock-cells : shall be 1 for "microchip,sam9x60-sckc" otherwise shall be 0. -- clocks : shall be the input parent clock phandle for the clock. - -Optional properties: -- atmel,osc-bypass : boolean property. Set this when a clock signal is directly - provided on XIN. - -For example: - sckc@fffffe50 { - compatible = "atmel,at91sam9x5-sckc"; - reg = <0xfffffe50 0x4>; - clocks = <&slow_xtal>; - #clock-cells = <0>; - }; - -Power Management Controller (PMC): - -Required properties: -- compatible : shall be "atmel,<chip>-pmc", "syscon" or - "microchip,sam9x60-pmc" - <chip> can be: at91rm9200, at91sam9260, at91sam9261, - at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9g15, - at91sam9g25, at91sam9g35, at91sam9x25, at91sam9x35, at91sam9x5, - sama5d2, sama5d3 or sama5d4. -- #clock-cells : from common clock binding; shall be set to 2. The first entry - is the type of the clock (core, system, peripheral or generated) and the - second entry its index as provided by the datasheet -- clocks : Must contain an entry for each entry in clock-names. -- clock-names: Must include the following entries: "slow_clk", "main_xtal" - -Optional properties: -- atmel,osc-bypass : boolean property. Set this when a clock signal is directly - provided on XIN. - -For example: - pmc: pmc@f0018000 { - compatible = "atmel,sama5d4-pmc", "syscon"; - reg = <0xf0018000 0x120>; - interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - #clock-cells = <2>; - clocks = <&clk32k>, <&main_xtal>; - clock-names = "slow_clk", "main_xtal"; - }; diff --git a/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml b/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml new file mode 100644 index 000000000000..c1bdcd9058ed --- /dev/null +++ b/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml @@ -0,0 +1,154 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/atmel,at91rm9200-pmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Power Management Controller (PMC) + +maintainers: + - Claudiu Beznea <claudiu.beznea@microchip.com> + +description: + The power management controller optimizes power consumption by controlling all + system and user peripheral clocks. The PMC enables/disables the clock inputs + to many of the peripherals and to the processor. + +properties: + compatible: + oneOf: + - items: + - const: atmel,at91sam9g20-pmc + - const: atmel,at91sam9260-pmc + - const: syscon + - items: + - enum: + - atmel,at91sam9g15-pmc + - atmel,at91sam9g25-pmc + - atmel,at91sam9g35-pmc + - atmel,at91sam9x25-pmc + - atmel,at91sam9x35-pmc + - const: atmel,at91sam9x5-pmc + - const: syscon + - items: + - enum: + - atmel,at91rm9200-pmc + - atmel,at91sam9260-pmc + - atmel,at91sam9g45-pmc + - atmel,at91sam9n12-pmc + - atmel,at91sam9rl-pmc + - atmel,at91sam9x5-pmc + - atmel,sama5d2-pmc + - atmel,sama5d3-pmc + - atmel,sama5d4-pmc + - microchip,sam9x60-pmc + - microchip,sama7g5-pmc + - const: syscon + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#clock-cells": + description: | + - 1st cell is the clock type, one of PMC_TYPE_CORE, PMC_TYPE_SYSTEM, + PMC_TYPE_PERIPHERAL, PMC_TYPE_GCK, PMC_TYPE_PROGRAMMABLE (as defined + in <dt-bindings/clock/at91.h>) + - 2nd cell is the clock identifier as defined in <dt-bindings/clock/at91.h + (for core clocks) or as defined in datasheet (for system, peripheral, + gck and programmable clocks). + const: 2 + + clocks: + minItems: 2 + maxItems: 3 + + clock-names: + minItems: 2 + maxItems: 3 + + atmel,osc-bypass: + description: set when a clock signal is directly provided on XIN + type: boolean + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + - clocks + - clock-names + +allOf: + - if: + properties: + compatible: + contains: + enum: + - microchip,sam9x60-pmc + - microchip,sama7g5-pmc + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: td_slck + - const: md_slck + - const: main_xtal + + - if: + properties: + compatible: + contains: + enum: + - atmel,at91rm9200-pmc + - atmel,at91sam9260-pmc + - atmel,at91sam9g20-pmc + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: slow_xtal + - const: main_xtal + + - if: + properties: + compatible: + contains: + enum: + - atmel,sama5d2-pmc + - atmel,sama5d3-pmc + - atmel,sama5d4-pmc + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: slow_clk + - const: main_xtal + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + pmc: clock-controller@f0018000 { + compatible = "atmel,sama5d4-pmc", "syscon"; + reg = <0xf0018000 0x120>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + #clock-cells = <2>; + clocks = <&clk32k>, <&main_xtal>; + clock-names = "slow_clk", "main_xtal"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/atmel,at91sam9x5-sckc.yaml b/Documentation/devicetree/bindings/clock/atmel,at91sam9x5-sckc.yaml new file mode 100644 index 000000000000..7be29877e6d2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/atmel,at91sam9x5-sckc.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/atmel,at91sam9x5-sckc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Slow Clock Controller (SCKC) + +maintainers: + - Claudiu Beznea <claudiu.beznea@microchip.com> + +properties: + compatible: + oneOf: + - enum: + - atmel,at91sam9x5-sckc + - atmel,sama5d3-sckc + - atmel,sama5d4-sckc + - microchip,sam9x60-sckc + - items: + - const: microchip,sama7g5-sckc + - const: microchip,sam9x60-sckc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#clock-cells": + enum: [0, 1] + + atmel,osc-bypass: + type: boolean + description: set when a clock signal is directly provided on XIN + +required: + - compatible + - reg + - clocks + - "#clock-cells" + +allOf: + - if: + properties: + compatible: + contains: + enum: + - microchip,sam9x60-sckc + then: + properties: + "#clock-cells": + const: 1 + else: + properties: + "#clock-cells": + const: 0 + +additionalProperties: false + +examples: + - | + clk32k: clock-controller@fffffe50 { + compatible = "microchip,sam9x60-sckc"; + reg = <0xfffffe50 0x4>; + clocks = <&slow_xtal>; + #clock-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml index 199818b2fb6d..cd0d763ce2f3 100644 --- a/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml +++ b/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/clock/brcm,bcm63268-timer-clocks.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Broadcom BCM63268 Timer Clock and Reset Device Tree Bindings +title: Broadcom BCM63268 Timer Clock and Reset maintainers: - Álvaro Fernández Rojas <noltari@gmail.com> diff --git a/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml index 998e5cce652f..380cb6d80025 100644 --- a/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml +++ b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Canaan Kendryte K210 Clock maintainers: - - Damien Le Moal <damien.lemoal@wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: | Canaan Kendryte K210 SoC clocks driver bindings. The clock diff --git a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml index 0dbc1433fede..80539f88bc27 100644 --- a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml @@ -24,6 +24,9 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 2 + clocks: minItems: 6 maxItems: 7 diff --git a/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml b/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml index ff9600474df2..0a6dc1a6e122 100644 --- a/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml +++ b/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/clock/imx8mp-audiomix.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: NXP i.MX8MP AudioMIX Block Control Binding +title: NXP i.MX8MP AudioMIX Block Control maintainers: - Marek Vasut <marex@denx.de> diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml index 9e733b10c392..509df06b9c9d 100644 --- a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml +++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml @@ -98,9 +98,9 @@ required: patternProperties: "^usb-phy@[a-f0-9]+$": - allOf: [ $ref: "../phy/ingenic,phy-usb.yaml#" ] + $ref: /schemas/phy/ingenic,phy-usb.yaml# "^mac-phy-ctrl@[a-f0-9]+$": - allOf: [ $ref: "../net/ingenic,mac.yaml#" ] + $ref: /schemas/net/ingenic,mac.yaml# additionalProperties: false diff --git a/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml b/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml new file mode 100644 index 000000000000..ba7ffc5b16a0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/mediatek,mtmips-sysc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MTMIPS SoCs System Controller + +maintainers: + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +description: | + MediaTek MIPS and Ralink SoCs provides a system controller to allow + to access to system control registers. These registers include clock + and reset related ones so this node is both clock and reset provider + for the rest of the world. + + These SoCs have an XTAL from where the cpu clock is + provided as well as derived clocks for the bus and the peripherals. + +properties: + compatible: + items: + - enum: + - ralink,mt7620-sysc + - ralink,mt7628-sysc + - ralink,mt7688-sysc + - ralink,rt2880-sysc + - ralink,rt3050-sysc + - ralink,rt3052-sysc + - ralink,rt3352-sysc + - ralink,rt3883-sysc + - ralink,rt5350-sysc + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + description: + The first cell indicates the clock number. + const: 1 + + '#reset-cells': + description: + The first cell indicates the reset bit within the register. + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + syscon@0 { + compatible = "ralink,rt5350-sysc", "syscon"; + reg = <0x0 0x100>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/nuvoton,ma35d1-clk.yaml b/Documentation/devicetree/bindings/clock/nuvoton,ma35d1-clk.yaml new file mode 100644 index 000000000000..8f0c43683729 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nuvoton,ma35d1-clk.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/nuvoton,ma35d1-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton MA35D1 Clock Controller Module + +maintainers: + - Chi-Fang Li <cfli0@nuvoton.com> + - Jacky Huang <ychuang3@nuvoton.com> + +description: | + The MA35D1 clock controller generates clocks for the whole chip, + including system clocks and all peripheral clocks. + + See also: + include/dt-bindings/clock/ma35d1-clk.h + +properties: + compatible: + items: + - const: nuvoton,ma35d1-clk + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + clocks: + maxItems: 1 + + nuvoton,pll-mode: + description: + A list of PLL operation mode corresponding to CAPLL, DDRPLL, APLL, + EPLL, and VPLL in sequential. + maxItems: 5 + items: + enum: + - integer + - fractional + - spread-spectrum + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + +required: + - compatible + - reg + - "#clock-cells" + - clocks + +additionalProperties: false + +examples: + - | + + clock-controller@40460200 { + compatible = "nuvoton,ma35d1-clk"; + reg = <0x40460200 0x100>; + #clock-cells = <1>; + clocks = <&clk_hxt>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml index 659669bf224b..9436266828af 100644 --- a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml @@ -19,6 +19,7 @@ properties: - qcom,ipq5332-a53pll - qcom,ipq6018-a53pll - qcom,ipq8074-a53pll + - qcom,ipq9574-a73pll - qcom,msm8916-a53pll - qcom,msm8939-a53pll diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml new file mode 100644 index 000000000000..fe9fd4cb185f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8953.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller on MSM8953 + +maintainers: + - Adam Skladowski <a_skl39@protonmail.com> + - Sireesh Kodali <sireeshkodali@protonmail.com> + +description: | + Qualcomm global clock control module provides the clocks, resets and power + domains on MSM8953. + + See also: include/dt-bindings/clock/qcom,gcc-msm8953.h + +properties: + compatible: + const: qcom,gcc-msm8953 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + - description: Byte clock from DSI PHY0 + - description: Pixel clock from DSI PHY0 + - description: Byte clock from DSI PHY1 + - description: Pixel clock from DSI PHY1 + + clock-names: + items: + - const: xo + - const: sleep + - const: dsi0pll + - const: dsi0pllbyte + - const: dsi1pll + - const: dsi1pllbyte + +required: + - compatible + - clocks + - clock-names + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + + clock-controller@1800000 { + compatible = "qcom,gcc-msm8953"; + reg = <0x01800000 0x80000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>, + <&dsi0_phy 1>, + <&dsi0_phy 0>, + <&dsi1_phy 1>, + <&dsi1_phy 0>; + clock-names = "xo", + "sleep", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml index ae01e7749534..ba969e7a57bf 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml @@ -30,7 +30,6 @@ properties: enum: - qcom,gcc-ipq6018 - qcom,gcc-mdm9607 - - qcom,gcc-msm8953 - qcom,gcc-mdm9615 required: diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml index 06dce0c6b7d0..8bf9b6f49550 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml @@ -32,6 +32,10 @@ properties: - const: bi_tcxo_ao - const: sleep_clk + power-domains: + items: + - description: CX domain + required: - compatible - clocks @@ -45,6 +49,8 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom-rpmpd.h> + clock-controller@100000 { compatible = "qcom,gcc-sc7180"; reg = <0x00100000 0x1f0000>; @@ -52,6 +58,7 @@ examples: <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + power-domains = <&rpmhpd SC7180_CX>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml index 947b47168cec..ff0b18bbb0fc 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml @@ -43,6 +43,10 @@ properties: - const: ufs_phy_tx_symbol_0_clk - const: usb3_phy_wrapper_gcc_usb30_pipe_clk + power-domains: + items: + - description: CX domain + required: - compatible - clocks @@ -56,6 +60,8 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom-rpmpd.h> + clock-controller@100000 { compatible = "qcom,gcc-sc7280"; reg = <0x00100000 0x1f0000>; @@ -71,6 +77,7 @@ examples: "pcie_1_pipe_clk", "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk", "ufs_phy_tx_symbol_0_clk", "usb3_phy_wrapper_gcc_usb30_pipe_clk"; + power-domains = <&rpmhpd SC7280_CX>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml index b752542ee20c..ead6665b9a45 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml @@ -23,11 +23,13 @@ properties: clocks: items: - description: Board XO source + - description: Board active XO source - description: Sleep clock source clock-names: items: - const: bi_tcxo + - const: bi_tcxo_ao - const: sleep_clk required: @@ -47,8 +49,9 @@ examples: compatible = "qcom,gcc-sm8250"; reg = <0x00100000 0x1f0000>; clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; - clock-names = "bi_tcxo", "sleep_clk"; + clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml index 1e3dc9deded9..a00216b3b15a 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml @@ -50,6 +50,9 @@ properties: - const: gcc_gpu_gpll0_clk_src - const: gcc_gpu_gpll0_div_clk_src + power-domains: + maxItems: 1 + '#clock-cells': const: 1 diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml index afc68eb9d7cc..944a0ea79cd6 100644 --- a/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml @@ -7,6 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Global Clock & Reset Controller on IPQ9574 maintainers: + - Bjorn Andersson <andersson@kernel.org> - Anusha Rao <quic_anusha@quicinc.com> description: | diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml index acf0c923c24f..422f5776a771 100644 --- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml @@ -31,11 +31,11 @@ properties: - qcom,mmcc-sdm660 clocks: - minItems: 8 + minItems: 7 maxItems: 13 clock-names: - minItems: 8 + minItems: 7 maxItems: 13 '#clock-cells': @@ -104,6 +104,34 @@ allOf: compatible: contains: enum: + - qcom,mmcc-msm8226 + then: + properties: + clocks: + items: + - description: Board XO source + - description: MMSS GPLL0 voted clock + - description: GPLL0 voted clock + - description: GPLL1 voted clock + - description: GFX3D clock source + - description: DSI phy instance 0 dsi clock + - description: DSI phy instance 0 byte clock + + clock-names: + items: + - const: xo + - const: mmss_gpll0_vote + - const: gpll0_vote + - const: gpll1_vote + - const: gfx3d_clk_src + - const: dsi0pll + - const: dsi0pllbyte + + - if: + properties: + compatible: + contains: + enum: - qcom,mmcc-msm8974 then: properties: diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml index d5a250b7c2af..267cf8c26823 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml @@ -27,6 +27,7 @@ properties: - qcom,sdm845-rpmh-clk - qcom,sdx55-rpmh-clk - qcom,sdx65-rpmh-clk + - qcom,sdx75-rpmh-clk - qcom,sm6350-rpmh-clk - qcom,sm8150-rpmh-clk - qcom,sm8250-rpmh-clk diff --git a/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml new file mode 100644 index 000000000000..3326dcd6766c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc8280xp-lpasscc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm LPASS Core & Audio Clock Controller on SC8280XP + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + Qualcomm LPASS core and audio clock control module provides the clocks, + and reset on SC8280XP. + + See also:: + include/dt-bindings/clock/qcom,lpasscc-sc8280xp.h + +properties: + compatible: + enum: + - qcom,sc8280xp-lpassaudiocc + - qcom,sc8280xp-lpasscc + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h> + lpass_audiocc: clock-controller@32a9000 { + compatible = "qcom,sc8280xp-lpassaudiocc"; + reg = <0x032a9000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + - | + #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h> + lpasscc: clock-controller@33e0000 { + compatible = "qcom,sc8280xp-lpasscc"; + reg = <0x033e0000 0x12000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml new file mode 100644 index 000000000000..98921fa236b1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sdx75-gcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller on SDX75 + +maintainers: + - Imran Shaik <quic_imrashai@quicinc.com> + - Taniya Das <quic_tdas@quicinc.com> + +description: | + Qualcomm global clock control module provides the clocks, resets and power + domains on SDX75 + + See also:: include/dt-bindings/clock/qcom,sdx75-gcc.h + +properties: + compatible: + const: qcom,sdx75-gcc + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + - description: EMAC0 sgmiiphy mac rclk source + - description: EMAC0 sgmiiphy mac tclk source + - description: EMAC0 sgmiiphy rclk source + - description: EMAC0 sgmiiphy tclk source + - description: EMAC1 sgmiiphy mac rclk source + - description: EMAC1 sgmiiphy mac tclk source + - description: EMAC1 sgmiiphy rclk source + - description: EMAC1 sgmiiphy tclk source + - description: PCIE20 phy aux clock source + - description: PCIE_1 Pipe clock source + - description: PCIE_2 Pipe clock source + - description: PCIE Pipe clock source + - description: USB3 phy wrapper pipe clock source + +required: + - compatible + - clocks + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@80000 { + compatible = "qcom,sdx75-gcc"; + reg = <0x80000 0x1f7400>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>, <&emac0_sgmiiphy_mac_rclk>, + <&emac0_sgmiiphy_mac_tclk>, <&emac0_sgmiiphy_rclk>, <&emac0_sgmiiphy_tclk>, + <&emac1_sgmiiphy_mac_rclk>, <&emac1_sgmiiphy_mac_tclk>, <&emac1_sgmiiphy_rclk>, + <&emac1_sgmiiphy_tclk>, <&pcie20_phy_aux_clk>, <&pcie_1_pipe_clk>, + <&pcie_2_pipe_clk>, <&pcie_pipe_clk>, <&usb3_phy_wrapper_gcc_usb30_pipe_clk>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml index b480ead5bd69..cf4cad76f6c9 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml @@ -27,9 +27,21 @@ properties: - description: GPLL0 div branch source - description: SNoC DVM GFX source + power-domains: + description: + A phandle and PM domain specifier for the VDD_GX power rail + maxItems: 1 + + required-opps: + description: + A phandle to an OPP node describing required VDD_GX performance point. + maxItems: 1 + required: - compatible - clocks + - power-domains + - required-opps allOf: - $ref: qcom,gcc.yaml# @@ -40,6 +52,7 @@ examples: - | #include <dt-bindings/clock/qcom,sm6375-gcc.h> #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/power/qcom-rpmpd.h> soc { #address-cells = <2>; @@ -52,6 +65,8 @@ examples: <&gcc GCC_GPU_GPLL0_CLK_SRC>, <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>, <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; + power-domains = <&rpmpd SM6375_VDDGX>; + required-opps = <&rpmpd_opp_low_svs>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml new file mode 100644 index 000000000000..23505c8c3dbd --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sm8350-videocc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8350 Video Clock & Reset Controller + +maintainers: + - Konrad Dybcio <konrad.dybcio@linaro.org> + +description: | + Qualcomm video clock control module provides the clocks, resets and power + domains on Qualcomm SoCs. + + See also:: + include/dt-bindings/clock/qcom,videocc-sm8350.h + include/dt-bindings/reset/qcom,videocc-sm8350.h + +properties: + compatible: + const: qcom,sm8350-videocc + + clocks: + items: + - description: Board XO source + - description: Board active XO source + - description: Board sleep clock + + power-domains: + description: + A phandle and PM domain specifier for the MMCX power domain. + maxItems: 1 + + required-opps: + description: + A phandle to an OPP node describing required MMCX performance point. + maxItems: 1 + +required: + - compatible + - clocks + - power-domains + - required-opps + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + clock-controller@abf0000 { + compatible = "qcom,sm8350-videocc"; + reg = <0x0abf0000 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + power-domains = <&rpmhpd SM8350_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml new file mode 100644 index 000000000000..2320be920a5f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sm8450-gpucc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Graphics Clock & Reset Controller on SM8450 + +maintainers: + - Konrad Dybcio <konrad.dybcio@linaro.org> + +description: | + Qualcomm graphics clock control module provides the clocks, resets and power + domains on Qualcomm SoCs. + + See also:: + include/dt-bindings/clock/qcom,sm8450-gpucc.h + include/dt-bindings/clock/qcom,sm8550-gpucc.h + include/dt-bindings/reset/qcom,sm8450-gpucc.h + +properties: + compatible: + enum: + - qcom,sm8450-gpucc + - qcom,sm8550-gpucc + + clocks: + items: + - description: Board XO source + - description: GPLL0 main branch source + - description: GPLL0 div branch source + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8450.h> + #include <dt-bindings/clock/qcom,rpmh.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@3d90000 { + compatible = "qcom,sm8450-gpucc"; + reg = <0 0x03d90000 0 0xa000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml new file mode 100644 index 000000000000..f1c6dd50f184 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sm8450-videocc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Video Clock & Reset Controller on SM8450 + +maintainers: + - Taniya Das <quic_tdas@quicinc.com> + +description: | + Qualcomm video clock control module provides the clocks, resets and power + domains on SM8450. + + See also:: include/dt-bindings/clock/qcom,videocc-sm8450.h + +properties: + compatible: + enum: + - qcom,sm8450-videocc + - qcom,sm8550-videocc + + reg: + maxItems: 1 + + clocks: + items: + - description: Board XO source + - description: Video AHB clock from GCC + + power-domains: + maxItems: 1 + description: + MMCX power domain. + + required-opps: + maxItems: 1 + description: + A phandle to an OPP node describing required MMCX performance point. + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + +required: + - compatible + - reg + - clocks + - power-domains + - required-opps + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8450.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom-rpmpd.h> + videocc: clock-controller@aaf0000 { + compatible = "qcom,sm8450-videocc"; + reg = <0x0aaf0000 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_VIDEO_AHB_CLK>; + power-domains = <&rpmhpd SM8450_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml index 99686085f751..26d94cedc871 100644 --- a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml @@ -48,7 +48,7 @@ properties: patternProperties: "^dma-router@[a-f0-9]+$": type: object - $ref: "../dma/renesas,rzn1-dmamux.yaml#" + $ref: /schemas/dma/renesas,rzn1-dmamux.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml index 0589a63e273a..a36781a455b6 100644 --- a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml @@ -24,6 +24,7 @@ properties: - samsung,exynos3250-cmu-dmc - samsung,exynos3250-cmu-isp - samsung,exynos4210-clock + - samsung,exynos4212-clock - samsung,exynos4412-clock - samsung,exynos5250-clock - items: diff --git a/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml b/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml new file mode 100644 index 000000000000..b2e40bd39a3a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ti,am62-audio-refclk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI Audio Reference Clock + +maintainers: + - Jai Luthra <j-luthra@ti.com> + +properties: + compatible: + items: + - const: ti,am62-audio-refclk + + reg: + maxItems: 1 + + "#clock-cells": + const: 0 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - "#clock-cells" + - clocks + +additionalProperties: false + +examples: + - | + audio_refclk0: clock@82e0 { + compatible = "ti,am62-audio-refclk"; + reg = <0x82e0 0x4>; + clocks = <&k3_clks 157 0>; + assigned-clocks = <&k3_clks 157 0>; + assigned-clock-parents = <&k3_clks 157 8>; + #clock-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml index 66765116aff5..64b8bce5962c 100644 --- a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml +++ b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml @@ -16,7 +16,6 @@ properties: - ti,am654-ehrpwm-tbclk - ti,am64-epwm-tbclk - ti,am62-epwm-tbclk - - const: syscon "#clock-cells": const: 1 @@ -33,8 +32,8 @@ additionalProperties: false examples: - | - ehrpwm_tbclk: syscon@4140 { - compatible = "ti,am654-ehrpwm-tbclk", "syscon"; + ehrpwm_tbclk: clock@4140 { + compatible = "ti,am654-ehrpwm-tbclk"; reg = <0x4140 0x18>; #clock-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml index c1f04830a832..02bd556bd91a 100644 --- a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml +++ b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx clocking wizard maintainers: - - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> + - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com> description: The clocking wizard is a soft ip clocking block of Xilinx versal. It diff --git a/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml b/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml index 229af98b1d30..5cbb34d0b61b 100644 --- a/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml +++ b/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml @@ -7,9 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Versal clock controller maintainers: - - Michal Simek <michal.simek@xilinx.com> - - Jolly Shah <jolly.shah@xilinx.com> - - Rajan Vaja <rajan.vaja@xilinx.com> + - Michal Simek <michal.simek@amd.com> description: | The clock controller is a hardware block of Xilinx versal clock tree. It diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index ae515651fc6b..1c4d3eb87763 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -168,6 +168,13 @@ properties: offer the power, Capability Mismatch is set. Required for power sink and power dual role. + port: + $ref: /schemas/graph.yaml#/properties/port + description: OF graph bindings modeling a data bus to the connector, e.g. + there is a single High Speed (HS) port present in this connector. If there + is more than one bus (several port, with 'reg' property), they can be grouped + under 'ports'. + ports: $ref: /schemas/graph.yaml#/properties/ports description: OF graph bindings modeling any data bus to the connector @@ -322,6 +329,19 @@ examples: }; }; + # USB-C connector attached to SoC with a single High-Speed controller + - | + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + + port { + high_speed_ep: endpoint { + remote-endpoint = <&usb_hs_ep>; + }; + }; + }; + # USB-C connector attached to SoC and USB3 typec port controller(hd3ss3220) # with SS 2:1 MUX. HS lines routed to SoC, SS lines routed to the MUX and # the output of MUX is connected to the SoC. diff --git a/Documentation/devicetree/bindings/cpu/idle-states.yaml b/Documentation/devicetree/bindings/cpu/idle-states.yaml index b8cc826c9501..b3a5356f9916 100644 --- a/Documentation/devicetree/bindings/cpu/idle-states.yaml +++ b/Documentation/devicetree/bindings/cpu/idle-states.yaml @@ -259,7 +259,7 @@ description: |+ http://infocenter.arm.com/help/index.jsp [5] ARM Linux Kernel documentation - Booting AArch64 Linux - Documentation/arm64/booting.rst + Documentation/arch/arm64/booting.rst [6] RISC-V Linux Kernel documentation - CPUs bindings Documentation/devicetree/bindings/riscv/cpus.yaml diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml index 6f5e7904181f..7e1bb992ce90 100644 --- a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml +++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml @@ -28,6 +28,7 @@ select: - qcom,apq8064 - qcom,apq8096 - qcom,ipq8064 + - qcom,ipq8074 - qcom,msm8939 - qcom,msm8960 - qcom,msm8974 diff --git a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml index ecf98a9e72b2..948e11ebe4ee 100644 --- a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml +++ b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml @@ -19,8 +19,8 @@ properties: interrupts: items: - - description: "Interrupt for flow 0" - - description: "Interrupt for flow 1" + - description: Interrupt for flow 0 + - description: Interrupt for flow 1 clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml index 286dffa0671b..e879bc0be8e2 100644 --- a/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml +++ b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml @@ -103,6 +103,12 @@ properties: wakeup-source: true linux,keycode: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 116 + deprecated: true + + linux,keycodes: + maxItems: 1 default: 116 required: diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml index 99be01539fcd..8dd36c2f76fd 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml +++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml @@ -11,9 +11,15 @@ maintainers: properties: compatible: - enum: - - fsl,imx23-dcp - - fsl,imx28-dcp + oneOf: + - enum: + - fsl,imx23-dcp + - fsl,imx28-dcp + - items: + - enum: + - fsl,imx6sl-dcp + - fsl,imx6ull-dcp + - const: fsl,imx28-dcp reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml index e0fe63957888..a4006237aa89 100644 --- a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml +++ b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml @@ -2,8 +2,8 @@ # Copyright 2018 Linaro Ltd. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/crypto/intel,ixp4xx-crypto.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/crypto/intel,ixp4xx-crypto.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel IXP4xx cryptographic engine @@ -21,7 +21,7 @@ properties: const: intel,ixp4xx-crypto intel,npe-handle: - $ref: '/schemas/types.yaml#/definitions/phandle-array' + $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - description: phandle to the NPE this crypto engine diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml index e375bd981300..bb828068c3b8 100644 --- a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml @@ -26,10 +26,18 @@ properties: - items: - enum: + - qcom,ipq4019-qce + - qcom,sm8150-qce + - const: qcom,qce + + - items: + - enum: - qcom,ipq6018-qce - qcom,ipq8074-qce - qcom,msm8996-qce + - qcom,qcm2290-qce - qcom,sdm845-qce + - qcom,sm6115-qce - const: qcom,ipq4019-qce - const: qcom,qce @@ -46,16 +54,12 @@ properties: maxItems: 1 clocks: - items: - - description: iface clocks register interface. - - description: bus clocks data transfer interface. - - description: core clocks rest of the crypto block. + minItems: 1 + maxItems: 3 clock-names: - items: - - const: iface - - const: bus - - const: core + minItems: 1 + maxItems: 3 iommus: minItems: 1 @@ -89,9 +93,37 @@ allOf: enum: - qcom,crypto-v5.1 - qcom,crypto-v5.4 - - qcom,ipq4019-qce + - qcom,ipq6018-qce + - qcom,ipq8074-qce + - qcom,msm8996-qce + - qcom,sdm845-qce + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: iface + - const: bus + - const: core + required: + - clocks + - clock-names + - if: + properties: + compatible: + contains: + enum: + - qcom,qcm2290-qce + - qcom,sm6115-qce then: + properties: + clocks: + maxItems: 1 + clock-names: + items: + - const: core required: - clocks - clock-names diff --git a/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml b/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml new file mode 100644 index 000000000000..71a2876bd6e4 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/starfive,jh7110-crypto.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive Cryptographic Module + +maintainers: + - Jia Jie Ho <jiajie.ho@starfivetech.com> + - William Qiu <william.qiu@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-crypto + + reg: + maxItems: 1 + + clocks: + items: + - description: Hardware reference clock + - description: AHB reference clock + + clock-names: + items: + - const: hclk + - const: ahb + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + items: + - description: TX DMA channel + - description: RX DMA channel + + dma-names: + items: + - const: tx + - const: rx + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + crypto: crypto@16000000 { + compatible = "starfive,jh7110-crypto"; + reg = <0x16000000 0x4000>; + clocks = <&clk 15>, <&clk 16>; + clock-names = "hclk", "ahb"; + interrupts = <28>; + resets = <&reset 3>; + dmas = <&dma 1 2>, + <&dma 0 2>; + dma-names = "tx", "rx"; + }; +... diff --git a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml index 9e8fbd02b150..8aead97a585b 100644 --- a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml +++ b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml @@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx ZynqMP AES-GCM Hardware Accelerator maintainers: - - Kalyani Akula <kalyani.akula@xilinx.com> - - Michal Simek <michal.simek@xilinx.com> + - Kalyani Akula <kalyani.akula@amd.com> + - Michal Simek <michal.simek@amd.com> description: | The ZynqMP AES-GCM hardened cryptographic accelerator is used to diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml new file mode 100644 index 000000000000..a3428f012005 --- /dev/null +++ b/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2020 BayLibre, SAS +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/amlogic,meson-g12a-dw-mipi-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic specific extensions to the Synopsys Designware MIPI DSI Host Controller + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +description: | + The Amlogic Meson Synopsys Designware Integration is composed of + - A Synopsys DesignWare MIPI DSI Host Controller IP + - A TOP control block controlling the Clocks & Resets of the IP + +allOf: + - $ref: dsi-controller.yaml# + +properties: + compatible: + enum: + - amlogic,meson-g12a-dw-mipi-dsi + + reg: + maxItems: 1 + + clocks: + minItems: 3 + maxItems: 4 + + clock-names: + minItems: 3 + items: + - const: pclk + - const: bit + - const: px + - const: meas + + resets: + maxItems: 1 + + reset-names: + items: + - const: top + + phys: + maxItems: 1 + + phy-names: + items: + - const: dphy + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input node to receive pixel data. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DSI output node to panel. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - phys + - phy-names + - ports + +unevaluatedProperties: false + +examples: + - | + dsi@6000 { + compatible = "amlogic,meson-g12a-dw-mipi-dsi"; + reg = <0x6000 0x400>; + resets = <&reset_top>; + reset-names = "top"; + clocks = <&clk_pclk>, <&bit_clk>, <&clk_px>; + clock-names = "pclk", "bit", "px"; + phys = <&mipi_dphy>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* VPU VENC Input */ + mipi_dsi_venc_port: port@0 { + reg = <0>; + + mipi_dsi_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + /* DSI Output */ + mipi_dsi_panel_port: port@1 { + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml index 0c72120acc4f..cb0a90f02321 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml +++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml @@ -96,6 +96,11 @@ properties: description: A port node pointing to the HDMI-TX port node. + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node pointing to the DPI port node (e.g. DSI or LVDS transceiver). + "#address-cells": const: 1 diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml index c9b06885cc63..62f0521b0924 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml @@ -26,6 +26,7 @@ properties: const: dp force-hpd: + type: boolean description: Indicate driver need force hpd when hpd detect failed, this is used for some eDP screen which don not have a hpd signal. diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml index 6e0e3ba9b49e..07388bf2b90d 100644 --- a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml +++ b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml @@ -17,6 +17,7 @@ description: | properties: compatible: enum: + - fsl,imx6sx-ldb - fsl,imx8mp-ldb - fsl,imx93-ldb @@ -64,7 +65,9 @@ allOf: properties: compatible: contains: - const: fsl,imx93-ldb + enum: + - fsl,imx6sx-ldb + - fsl,imx93-ldb then: properties: ports: diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml index c4bf54397473..21d995f29a1e 100644 --- a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml +++ b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml @@ -20,6 +20,7 @@ properties: maxItems: 1 video-ports: + $ref: /schemas/types.yaml#/definitions/uint32 default: 0x230145 maximum: 0xffffff description: diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml index e841659e20cd..4ed7a799ba26 100644 --- a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml +++ b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml @@ -70,7 +70,9 @@ properties: samsung,burst-clock-frequency: $ref: /schemas/types.yaml#/definitions/uint32 description: - DSIM high speed burst mode frequency. + DSIM high speed burst mode frequency. If absent, + the pixel clock from the attached device or bridge + will be used instead. samsung,esc-clock-frequency: $ref: /schemas/types.yaml#/definitions/uint32 @@ -80,7 +82,8 @@ properties: samsung,pll-clock-frequency: $ref: /schemas/types.yaml#/definitions/uint32 description: - DSIM oscillator clock frequency. + DSIM oscillator clock frequency. If absent, the clock frequency + of sclk_mipi will be used instead. phys: maxItems: 1 @@ -100,20 +103,42 @@ properties: specified. port@1: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: DSI output port node to the panel or the next bridge in the chain. + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + uniqueItems: true + items: + enum: [ 1, 2, 3, 4 ] + + lane-polarities: + minItems: 1 + maxItems: 5 + description: + The Samsung MIPI DSI IP requires that all the data lanes have + the same polarity. + + dependencies: + lane-polarities: [data-lanes] + required: - clock-names - clocks - compatible - interrupts - reg - - samsung,burst-clock-frequency - samsung,esc-clock-frequency - - samsung,pll-clock-frequency allOf: - $ref: ../dsi-controller.yaml# diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml index 81ca3cbc7abe..6c1de0b21722 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml @@ -21,6 +21,9 @@ properties: maxItems: 1 description: virtual channel number of a DSI peripheral + reset-gpios: + maxItems: 1 + vddc-supply: description: Regulator for 1.2V internal core power. diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml index e1494b5007cb..0521261b04a9 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml @@ -4,16 +4,24 @@ $id: http://devicetree.org/schemas/display/bridge/toshiba,tc358767.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Toshiba TC358767 eDP bridge +title: Toshiba TC358767/TC358867/TC9595 DSI/DPI/eDP bridge maintainers: - Andrey Gusakov <andrey.gusakov@cogentembedded.com> -description: The TC358767 is bridge device which converts DSI/DPI to eDP/DP +description: | + The TC358767/TC358867/TC9595 is bridge device which + converts DSI/DPI to eDP/DP . properties: compatible: - const: toshiba,tc358767 + oneOf: + - items: + - enum: + - toshiba,tc358867 + - toshiba,tc9595 + - const: toshiba,tc358767 + - const: toshiba,tc358767 reg: enum: diff --git a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml index 83c0d008265b..3ee8f9225984 100644 --- a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml +++ b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml @@ -36,6 +36,9 @@ properties: description: GPIO signal to enable DDC bus maxItems: 1 + hdmi-pwr-supply: + description: Power supply for the HDMI +5V Power pin + port: $ref: /schemas/graph.yaml#/properties/port description: Connection to controller providing HDMI signals diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml index 75b4efd70ba8..fc11ab5fc465 100644 --- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml +++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml @@ -21,6 +21,7 @@ properties: - fsl,imx28-lcdif - fsl,imx6sx-lcdif - fsl,imx8mp-lcdif + - fsl,imx93-lcdif - items: - enum: - fsl,imx6sl-lcdif @@ -88,7 +89,9 @@ allOf: properties: compatible: contains: - const: fsl,imx8mp-lcdif + enum: + - fsl,imx8mp-lcdif + - fsl,imx93-lcdif then: properties: clocks: @@ -107,6 +110,7 @@ allOf: enum: - fsl,imx6sx-lcdif - fsl,imx8mp-lcdif + - fsl,imx93-lcdif then: properties: clocks: @@ -123,6 +127,7 @@ allOf: - fsl,imx8mm-lcdif - fsl,imx8mn-lcdif - fsl,imx8mp-lcdif + - fsl,imx93-lcdif then: required: - power-domains diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml index 92741486c24d..7fd42c8fdc32 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml @@ -27,6 +27,7 @@ properties: - items: - enum: - mediatek,mt2712-disp-aal + - mediatek,mt6795-disp-aal - const: mediatek,mt8173-disp-aal - items: - enum: diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml index d0ea77fc4b06..f21e44092043 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml @@ -33,6 +33,7 @@ properties: - const: mediatek,mt2701-disp-color - items: - enum: + - mediatek,mt6795-disp-color - mediatek,mt8183-disp-color - mediatek,mt8186-disp-color - mediatek,mt8188-disp-color diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml index d976380801e3..803c00f26206 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml @@ -17,15 +17,20 @@ description: | properties: compatible: - enum: - - mediatek,mt2701-dpi - - mediatek,mt7623-dpi - - mediatek,mt8173-dpi - - mediatek,mt8183-dpi - - mediatek,mt8186-dpi - - mediatek,mt8188-dp-intf - - mediatek,mt8192-dpi - - mediatek,mt8195-dp-intf + oneOf: + - enum: + - mediatek,mt2701-dpi + - mediatek,mt7623-dpi + - mediatek,mt8173-dpi + - mediatek,mt8183-dpi + - mediatek,mt8186-dpi + - mediatek,mt8188-dp-intf + - mediatek,mt8192-dpi + - mediatek,mt8195-dp-intf + - items: + - enum: + - mediatek,mt6795-dpi + - const: mediatek,mt8183-dpi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml index 4707b60238b0..12441b937684 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml @@ -22,13 +22,18 @@ allOf: properties: compatible: - enum: - - mediatek,mt2701-dsi - - mediatek,mt7623-dsi - - mediatek,mt8167-dsi - - mediatek,mt8173-dsi - - mediatek,mt8183-dsi - - mediatek,mt8186-dsi + oneOf: + - enum: + - mediatek,mt2701-dsi + - mediatek,mt7623-dsi + - mediatek,mt8167-dsi + - mediatek,mt8173-dsi + - mediatek,mt8183-dsi + - mediatek,mt8186-dsi + - items: + - enum: + - mediatek,mt6795-dsi + - const: mediatek,mt8173-dsi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml index 6c2be9d6840b..c6641acd75d6 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml @@ -26,6 +26,10 @@ properties: - mediatek,mt8183-disp-gamma - items: - enum: + - mediatek,mt6795-disp-gamma + - const: mediatek,mt8173-disp-gamma + - items: + - enum: - mediatek,mt8186-disp-gamma - mediatek,mt8188-disp-gamma - mediatek,mt8192-disp-gamma diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml index 2f8e2f4dc3b8..eead5cb8636e 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml @@ -24,6 +24,9 @@ properties: - enum: - mediatek,mt8173-disp-merge - mediatek,mt8195-disp-merge + - items: + - const: mediatek,mt6795-disp-merge + - const: mediatek,mt8173-disp-merge reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml index 29f9fa8f8219..831c653caffd 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml @@ -24,6 +24,9 @@ properties: - enum: - mediatek,mt2712-disp-od - mediatek,mt8173-disp-od + - items: + - const: mediatek,mt6795-disp-od + - const: mediatek,mt8173-disp-od reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml index 92e320d54ba2..3e1069b00b56 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml @@ -33,6 +33,10 @@ properties: - const: mediatek,mt2701-disp-ovl - items: - enum: + - mediatek,mt6795-disp-ovl + - const: mediatek,mt8173-disp-ovl + - items: + - enum: - mediatek,mt8188-disp-ovl - mediatek,mt8195-disp-ovl - const: mediatek,mt8183-disp-ovl diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml index 42059efad45d..39dbb5c8bcf8 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml @@ -39,6 +39,10 @@ properties: - const: mediatek,mt2701-disp-rdma - items: - enum: + - mediatek,mt6795-disp-rdma + - const: mediatek,mt8173-disp-rdma + - items: + - enum: - mediatek,mt8186-disp-rdma - mediatek,mt8192-disp-rdma - const: mediatek,mt8183-disp-rdma diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml index 21a4e96ecd93..a8a5c9608598 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml @@ -23,6 +23,9 @@ properties: oneOf: - enum: - mediatek,mt8173-disp-split + - items: + - const: mediatek,mt6795-disp-split + - const: mediatek,mt8173-disp-split reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml index 62fad23a26f5..39e3e2d4a0db 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml @@ -24,6 +24,9 @@ properties: oneOf: - enum: - mediatek,mt8173-disp-ufoe + - items: + - const: mediatek,mt6795-disp-ufoe + - const: mediatek,mt8173-disp-ufoe reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml index 991183165d29..a3a2b71a4523 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml @@ -23,6 +23,9 @@ properties: oneOf: - enum: - mediatek,mt8173-disp-wdma + - items: + - const: mediatek,mt6795-disp-wdma + - const: mediatek,mt8173-disp-wdma reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml index f0c2237d5f82..7a7cf3fb3e6d 100644 --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml @@ -29,6 +29,7 @@ properties: - items: - enum: - qcom,sm8450-dp + - qcom,sm8550-dp - const: qcom,sm8350-dp reg: diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index e6c1ebfe8a32..01848bdd5873 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -15,6 +15,7 @@ properties: - items: - enum: - qcom,apq8064-dsi-ctrl + - qcom,msm8226-dsi-ctrl - qcom,msm8916-dsi-ctrl - qcom,msm8953-dsi-ctrl - qcom,msm8974-dsi-ctrl @@ -26,6 +27,8 @@ properties: - qcom,sdm660-dsi-ctrl - qcom,sdm845-dsi-ctrl - qcom,sm6115-dsi-ctrl + - qcom,sm6350-dsi-ctrl + - qcom,sm6375-dsi-ctrl - qcom,sm8150-dsi-ctrl - qcom,sm8250-dsi-ctrl - qcom,sm8350-dsi-ctrl @@ -82,6 +85,18 @@ properties: Indicates if the DSI controller is driving a panel which needs 2 DSI links. + qcom,master-dsi: + type: boolean + description: | + Indicates if the DSI controller is the master DSI controller when + qcom,dual-dsi-mode enabled. + + qcom,sync-dual-dsi: + type: boolean + description: | + Indicates if the DSI controller needs to sync the other DSI controller + with MIPI DCS commands when qcom,dual-dsi-mode enabled. + assigned-clocks: minItems: 2 maxItems: 4 @@ -244,6 +259,7 @@ allOf: compatible: contains: enum: + - qcom,msm8226-dsi-ctrl - qcom,msm8974-dsi-ctrl then: properties: @@ -285,6 +301,7 @@ allOf: contains: enum: - qcom,msm8998-dsi-ctrl + - qcom,sm6350-dsi-ctrl then: properties: clocks: @@ -352,6 +369,7 @@ allOf: enum: - qcom,sdm845-dsi-ctrl - qcom,sm6115-dsi-ctrl + - qcom,sm6375-dsi-ctrl then: properties: clocks: diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml index cf4a338c4661..62fb3e484eb2 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml @@ -15,10 +15,11 @@ allOf: properties: compatible: enum: + - qcom,dsi-phy-28nm-8226 + - qcom,dsi-phy-28nm-8960 - qcom,dsi-phy-28nm-hpm - qcom,dsi-phy-28nm-hpm-fam-b - qcom,dsi-phy-28nm-lp - - qcom,dsi-phy-28nm-8960 reg: items: diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml index 029d72822d8b..5fc4106110ad 100644 --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml @@ -19,16 +19,18 @@ description: | properties: compatible: - items: - - pattern: '^qcom,adreno-gmu-6[0-9][0-9]\.[0-9]$' - - const: qcom,adreno-gmu + oneOf: + - items: + - pattern: '^qcom,adreno-gmu-6[0-9][0-9]\.[0-9]$' + - const: qcom,adreno-gmu + - const: qcom,adreno-gmu-wrapper reg: - minItems: 3 + minItems: 1 maxItems: 4 reg-names: - minItems: 3 + minItems: 1 maxItems: 4 clocks: @@ -44,7 +46,6 @@ properties: - description: GMU HFI interrupt - description: GMU interrupt - interrupt-names: items: - const: hfi @@ -72,14 +73,8 @@ required: - compatible - reg - reg-names - - clocks - - clock-names - - interrupts - - interrupt-names - power-domains - power-domain-names - - iommus - - operating-points-v2 additionalProperties: false @@ -122,6 +117,7 @@ allOf: contains: enum: - qcom,adreno-gmu-635.0 + - qcom,adreno-gmu-660.1 then: properties: reg: @@ -217,6 +213,28 @@ allOf: - const: axi - const: memnoc + - if: + properties: + compatible: + contains: + const: qcom,adreno-gmu-wrapper + then: + properties: + reg: + items: + - description: GMU wrapper register space + reg-names: + items: + - const: gmu + else: + required: + - clocks + - clock-names + - interrupts + - interrupt-names + - iommus + - operating-points-v2 + examples: - | #include <dt-bindings/clock/qcom,gpucc-sdm845.h> @@ -249,3 +267,12 @@ examples: iommus = <&adreno_smmu 5>; operating-points-v2 = <&gmu_opp_table>; }; + + gmu_wrapper: gmu@596a000 { + compatible = "qcom,adreno-gmu-wrapper"; + reg = <0x0596a000 0x30000>; + reg-names = "gmu"; + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", "gx"; + }; diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml index 5dabe7b6794b..58ca8912a8c3 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml @@ -36,10 +36,7 @@ properties: reg-names: minItems: 1 - items: - - const: kgsl_3d0_reg_memory - - const: cx_mem - - const: cx_dbgc + maxItems: 3 interrupts: maxItems: 1 @@ -157,16 +154,62 @@ allOf: required: - clocks - clock-names + - if: properties: compatible: contains: - pattern: '^qcom,adreno-6[0-9][0-9]\.[0-9]$' - - then: # Since Adreno 6xx series clocks should be defined in GMU + enum: + - qcom,adreno-610.0 + - qcom,adreno-619.1 + then: properties: - clocks: false - clock-names: false + clocks: + minItems: 6 + maxItems: 6 + + clock-names: + items: + - const: core + description: GPU Core clock + - const: iface + description: GPU Interface clock + - const: mem_iface + description: GPU Memory Interface clock + - const: alt_mem_iface + description: GPU Alternative Memory Interface clock + - const: gmu + description: CX GMU clock + - const: xo + description: GPUCC clocksource clock + + reg-names: + minItems: 1 + items: + - const: kgsl_3d0_reg_memory + - const: cx_dbgc + + required: + - clocks + - clock-names + else: + if: + properties: + compatible: + contains: + pattern: '^qcom,adreno-6[0-9][0-9]\.[0-9]$' + + then: # Starting with A6xx, the clocks are usually defined in the GMU node + properties: + clocks: false + clock-names: false + + reg-names: + minItems: 1 + items: + - const: kgsl_3d0_reg_memory + - const: cx_mem + - const: cx_dbgc examples: - | diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml index a763cf8da122..2fe032d0e8f8 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml @@ -22,6 +22,7 @@ properties: - items: - enum: - qcom,apq8084-mdp5 + - qcom,msm8226-mdp5 - qcom,msm8916-mdp5 - qcom,msm8917-mdp5 - qcom,msm8953-mdp5 diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml index b0100105e428..db9f07c6142d 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml @@ -125,6 +125,7 @@ patternProperties: - qcom,dsi-phy-14nm-660 - qcom,dsi-phy-14nm-8953 - qcom,dsi-phy-20nm + - qcom,dsi-phy-28nm-8226 - qcom,dsi-phy-28nm-hpm - qcom,dsi-phy-28nm-lp - qcom,hdmi-phy-8084 diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml index 1fb8321d9ee8..630b11480496 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml @@ -13,7 +13,10 @@ $ref: /schemas/display/msm/dpu-common.yaml# properties: compatible: - const: qcom,sc7180-dpu + enum: + - qcom,sc7180-dpu + - qcom,sm6350-dpu + - qcom,sm6375-dpu reg: items: @@ -26,6 +29,7 @@ properties: - const: vbif clocks: + minItems: 6 items: - description: Display hf axi clock - description: Display ahb clock @@ -33,8 +37,10 @@ properties: - description: Display lut clock - description: Display core clock - description: Display vsync clock + - description: Display core throttle clock clock-names: + minItems: 6 items: - const: bus - const: iface @@ -42,6 +48,7 @@ properties: - const: lut - const: core - const: vsync + - const: throttle required: - compatible @@ -52,6 +59,20 @@ required: unevaluatedProperties: false +allOf: + - if: + properties: + compatible: + const: qcom,sm6375-dpu + + then: + properties: + clocks: + minItems: 7 + + clock-names: + minItems: 7 + examples: - | #include <dt-bindings/clock/qcom,dispcc-sc7180.h> diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml new file mode 100644 index 000000000000..ed0ad194d4ce --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml @@ -0,0 +1,213 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6350-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6350 Display MDSS + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +description: + SM6350 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks + like DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sm6350-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AXI clock from gcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm6350-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - const: qcom,sm6350-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,dsi-phy-10nm + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm6350.h> + #include <dt-bindings/clock/qcom,gcc-sm6350.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sm6350-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x800 0x2>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sm6350-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "rot", "lut", "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>; + assigned-clock-rates = <300000000>, + <19200000>, + <19200000>, + <19200000>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM6350_CX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,sm6350-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM6350_MX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml new file mode 100644 index 000000000000..76369a4f7c4d --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml @@ -0,0 +1,215 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6375-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6375 Display MDSS + +maintainers: + - Konrad Dybcio <konrad.dybcio@linaro.org> + +description: + SM6375 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks + like DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sm6375-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm6375-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - const: qcom,sm6375-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm6375-dsi-phy-7nm + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/clock/qcom,sm6375-gcc.h> + #include <dt-bindings/clock/qcom,sm6375-dispcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@5e00000 { + compatible = "qcom,sm6375-mdss"; + reg = <0x05e00000 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "ahb", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x820 0x2>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@5e01000 { + compatible = "qcom,sm6375-dpu"; + reg = <0x05e01000 0x8e030>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&gcc GCC_DISP_THROTTLE_CORE_CLK>; + clock-names = "bus", + "iface", + "rot", + "lut", + "core", + "vsync", + "throttle"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd SM6375_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + + dsi@5e94000 { + compatible = "qcom,sm6375-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x05e94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd SM6375_VDDMX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@5e94400 { + compatible = "qcom,sm6375-dsi-phy-7nm"; + reg = <0x05e94400 0x200>, + <0x05e94600 0x280>, + <0x05e94900 0x264>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml index 4d94dbff3054..79a226e4cc6a 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml @@ -64,7 +64,7 @@ patternProperties: type: object properties: compatible: - const: qcom,dsi-phy-5nm-8350 + const: qcom,sm8350-dsi-phy-5nm unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml index aed55608ebf6..906ef62709b8 100644 --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml @@ -32,6 +32,10 @@ properties: - innolux,hj110iz-01a # STARRY 2081101QFH032011-53G 10.1" WUXGA TFT LCD panel - starry,2081101qfh032011-53g + # STARRY himax83102-j02 10.51" WUXGA TFT LCD panel + - starry,himax83102-j02 + # STARRY ili9882t 10.51" WUXGA TFT LCD panel + - starry,ili9882t reg: description: the virtual channel number of a DSI peripheral diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml index 0039561ef04c..5f7e4c486094 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml @@ -19,11 +19,16 @@ allOf: properties: compatible: - items: - - enum: - - xiaomi,elish-boe-nt36523 - - xiaomi,elish-csot-nt36523 - - const: novatek,nt36523 + oneOf: + - items: + - enum: + - xiaomi,elish-boe-nt36523 + - xiaomi,elish-csot-nt36523 + - const: novatek,nt36523 + - items: + - enum: + - lenovo,j606f-boe-nt36523w + - const: novatek,nt36523w reset-gpios: maxItems: 1 @@ -34,6 +39,7 @@ properties: reg: true ports: true + rotation: true backlight: true required: diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml index 9b701df5e9d2..2f0238b770eb 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml @@ -67,6 +67,7 @@ properties: items: - enum: - sainsmart18 + - shineworld,lh133k - const: panel-mipi-dbi-spi write-only: @@ -86,6 +87,8 @@ properties: Logic level supply for interface signals (Vddi). No need to set if this is the same as power-supply. + spi-3wire: true + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 01560fe226dd..1d4936fc5182 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -33,6 +33,8 @@ properties: - ampire,am-1280800n3tzqw-t00h # Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel - ampire,am-480272h3tmqw-t01h + # Ampire AM-800480L1TMQW-T00H 5" WVGA TFT LCD panel + - ampire,am-800480l1tmqw-t00h # Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel - ampire,am800480r3tmqwa1h # Ampire AM-800600P5TMQW-TB8H 8.0" SVGA TFT LCD panel @@ -77,6 +79,8 @@ properties: - auo,t215hvn01 # Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel - avic,tm070ddh03 + # BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel + - boe,ev121wxm-n10-1850 # BOE HV070WSA-100 7.01" WSVGA TFT LCD panel - boe,hv070wsa-100 # BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel @@ -174,6 +178,8 @@ properties: - innolux,at043tn24 # Innolux AT070TN92 7.0" WQVGA TFT LCD panel - innolux,at070tn92 + # Innolux G070ACE-L01 7" WVGA (800x480) TFT LCD panel + - innolux,g070ace-l01 # Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel - innolux,g070y2-l01 # Innolux G070Y2-T02 7" WVGA (800x480) TFT LCD TTL panel @@ -280,6 +286,8 @@ properties: - rocktech,rk101ii01d-ct # Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel - rocktech,rk070er9427 + # Rocktech Display Ltd. RK043FN48H 4.3" 480x272 LCD-TFT panel + - rocktech,rk043fn48h # Samsung 13.3" FHD (1920x1080 pixels) eDP AMOLED panel - samsung,atna33xc20 # Samsung 12.2" (2560x1600 pixels) TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml index 09b5eb7542f8..150e81090af2 100644 --- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml +++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml @@ -20,6 +20,8 @@ allOf: properties: compatible: enum: + # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel + - anbernic,rg353v-panel-v2 # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel - rocktech,jh057n00900 # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml new file mode 100644 index 000000000000..45a236d2cc70 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,s6d7aa0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S6D7AA0 MIPI-DSI LCD panel controller + +maintainers: + - Artur Weber <aweber.kernel@gmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + # 1280x800 LSL080AL02 panel + - samsung,lsl080al02 + # 1024x768 LSL080AL03 panel + - samsung,lsl080al03 + # 1024x768 LTL101AT01 panel + - samsung,ltl101at01 + - const: samsung,s6d7aa0 + + reg: true + + backlight: + description: + Backlight to use for the panel. If this property is set on panels + that have DSI-based backlight control (LSL080AL03 and LTL101AT01), + it overrides the DSI-based backlight. + + reset-gpios: + description: Reset GPIO pin, usually GPIO_ACTIVE_LOW. + + power-supply: + description: + Main power supply for the panel; the exact voltage differs between + panels, and is usually somewhere around 3.3-5v. + + vmipi-supply: + description: VMIPI supply, usually 1.8v. + +required: + - compatible + - reg + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,lsl080al02", "samsung,s6d7aa0"; + reg = <0>; + power-supply = <&display_3v3_supply>; + reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml index c488308d7be1..53560052aaf0 100644 --- a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml +++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml @@ -74,8 +74,6 @@ properties: - const: 2 required: - - "#address-cells" - - "#size-cells" - compatible - reg - clocks diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml index a42bf33d1e7d..2181855a0920 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml @@ -73,6 +73,18 @@ properties: avdd-dsi-csi-supply: description: DSI/CSI power supply. Must supply 1.2 V. + vip: + $ref: /schemas/display/tegra/nvidia,tegra20-vip.yaml + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Input from the VIP (parallel input capture) module + patternProperties: "^csi@[0-9a-f]+$": type: object @@ -108,6 +120,22 @@ examples: #include <dt-bindings/clock/tegra20-car.h> #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + camera@48 { + compatible = "aptina,mt9v111"; + reg = <0x48>; + clocks = <&camera_clk>; + + port { + mt9v111_out: endpoint { + remote-endpoint = <&vi_vip_in>; + }; + }; + }; + }; + vi@54080000 { compatible = "nvidia,tegra20-vi"; reg = <0x54080000 0x00040000>; @@ -115,6 +143,37 @@ examples: clocks = <&tegra_car TEGRA20_CLK_VI>; resets = <&tegra_car 100>; reset-names = "vi"; + + vip { + compatible = "nvidia,tegra20-vip"; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + vi_vip_in: endpoint { + remote-endpoint = <&mt9v111_out>; + }; + }; + port@1 { + reg = <1>; + vi_vip_out: endpoint { + remote-endpoint = <&vi_in>; + }; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + vi_in: endpoint { + remote-endpoint = <&vi_vip_out>; + }; + }; + }; }; - | diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml new file mode 100644 index 000000000000..14294edb8d8c --- /dev/null +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-vip.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra VIP (parallel video capture) controller + +maintainers: + - Luca Ceresoli <luca.ceresoli@bootlin.com> + +properties: + compatible: + enum: + - nvidia,tegra20-vip + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Port receiving the video stream from the sensor + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Port sending the video stream to the VI + + required: + - port@0 + - port@1 + +unevaluatedProperties: false + +required: + - compatible + - ports + +# see nvidia,tegra20-vi.yaml for an example diff --git a/Documentation/devicetree/bindings/dvfs/performance-domain.yaml b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml index 1dcb85a02a76..cc930660b794 100644 --- a/Documentation/devicetree/bindings/dvfs/performance-domain.yaml +++ b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml @@ -42,7 +42,7 @@ properties: enum: [ 0, 1 ] performance-domains: - $ref: '/schemas/types.yaml#/definitions/phandle-array' + $ref: /schemas/types.yaml#/definitions/phandle-array description: A phandle and performance domain specifier as defined by bindings of the performance controller/provider specified by phandle. diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml index 11e2a95a7bcb..0e31bb36ebb1 100644 --- a/Documentation/devicetree/bindings/eeprom/at25.yaml +++ b/Documentation/devicetree/bindings/eeprom/at25.yaml @@ -33,6 +33,7 @@ properties: - microchip,25lc040 - st,m95m02 - st,m95256 + - st,m95640 - cypress,fm25 - const: atmel,at25 diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml index f4eec4c42fb3..a41f9b9a196b 100644 --- a/Documentation/devicetree/bindings/example-schema.yaml +++ b/Documentation/devicetree/bindings/example-schema.yaml @@ -52,8 +52,7 @@ properties: - vendor,soc4-ip - vendor,soc3-ip - vendor,soc2-ip - - enum: - - vendor,soc1-ip + - const: vendor,soc1-ip # additionalItems being false is implied # minItems/maxItems equal to 2 is implied - items: @@ -85,6 +84,9 @@ properties: discouraged. clock-names: + # For single-entry lists in clocks, resets etc., the xxx-names often do not + # bring any value, especially if they copy the IP block name. In such case + # just skip the xxx-names. items: - const: bus diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml index 6a9c96f0352a..2c8cf6aab19a 100644 --- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml +++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml @@ -27,10 +27,14 @@ properties: interrupt-names: minItems: 1 - items: - - const: usb_id - - const: usb_vbus - + anyOf: + - items: + - const: usb_id + - const: usb_vbus + - items: + - const: usb_id + - items: + - const: usb_vbus required: - compatible - reg @@ -49,7 +53,7 @@ examples: interrupt-controller; #interrupt-cells = <4>; - usb_id: misc@900 { + usb_id: usb-detect@900 { compatible = "qcom,pm8941-misc"; reg = <0x900>; interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>; diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml index efdf59abb2e1..351b202d0e10 100644 --- a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml +++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml @@ -23,7 +23,7 @@ properties: headphone detect mode to HPDETL, ARIZONA_ACCDET_MODE_HPR/2 sets it to HPDETR. If this node is not included or if the value is unknown, then headphone detection mode is set to HPDETL. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 maximum: 2 @@ -51,7 +51,7 @@ properties: description: Additional software microphone detection debounce specified in milliseconds. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 wlf,micd-pol-gpio: description: @@ -63,7 +63,7 @@ properties: description: Time allowed for MICBIAS to startup prior to performing microphone detection, specified as per the ARIZONA_MICD_TIME_XXX defines. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 12 @@ -71,7 +71,7 @@ properties: description: Delay between successive microphone detection measurements, specified as per the ARIZONA_MICD_TIME_XXX defines. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 12 @@ -79,7 +79,7 @@ properties: description: Microphone detection hardware debounces specified as the number of measurements to take. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 enum: [2, 4] wlf,micd-timeout-ms: @@ -97,7 +97,7 @@ properties: CTIA / OMTP headsets), the field can be of variable length but should always be a multiple of 3 cells long, each three cell group represents one polarity configuration. - $ref: "/schemas/types.yaml#/definitions/uint32-matrix" + $ref: /schemas/types.yaml#/definitions/uint32-matrix items: items: - description: @@ -119,7 +119,7 @@ properties: description: Settings for the general purpose switch, set as one of the ARIZONA_GPSW_XXX defines. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3 diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml index 5824c43e9893..b138f3d23df8 100644 --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml @@ -34,6 +34,10 @@ properties: - description: SCMI compliant firmware with ARM SMC/HVC transport items: - const: arm,scmi-smc + - description: SCMI compliant firmware with ARM SMC/HVC transport + with shmem address(4KB-page, offset) as parameters + items: + - const: arm,scmi-smc-param - description: SCMI compliant firmware with SCMI Virtio transport. The virtio transport only supports a single device. items: @@ -214,7 +218,7 @@ properties: patternProperties: '^regulator@[0-9a-f]+$': type: object - $ref: "../regulator/regulator.yaml#" + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false properties: @@ -299,7 +303,9 @@ else: properties: compatible: contains: - const: arm,scmi-smc + enum: + - arm,scmi-smc + - arm,scmi-smc-param then: required: - arm,smc-id diff --git a/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml b/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml new file mode 100644 index 000000000000..684b15ba9ad0 --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware/brcm,kona-smc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Kona family Secure Monitor bounce buffer + +description: + A bounce buffer used for non-secure to secure communications. + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + items: + - enum: + - brcm,bcm11351-smc + - brcm,bcm21664-smc + - brcm,bcm23550-smc + - const: brcm,kona-smc + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + smc@3404c000 { + compatible = "brcm,bcm11351-smc", "brcm,kona-smc"; + reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */ + }; +... diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml index 367d04ad1923..bdbee58a542b 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml @@ -51,6 +51,7 @@ properties: - qcom,scm-sdm845 - qcom,scm-sdx55 - qcom,scm-sdx65 + - qcom,scm-sdx75 - qcom,scm-sm6115 - qcom,scm-sm6125 - qcom,scm-sm6350 @@ -71,6 +72,8 @@ properties: minItems: 1 maxItems: 3 + dma-coherent: true + interconnects: maxItems: 1 diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml index f14f7b454f07..910bebe6cfa8 100644 --- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml +++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx firmware driver maintainers: - - Nava kishore Manne <nava.manne@xilinx.com> + - Nava kishore Manne <nava.kishore.manne@amd.com> description: The zynqmp-firmware node describes the interface to platform firmware. ZynqMP has an interface to communicate with secure firmware. diff --git a/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml b/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml index 4fb05eb84e2a..164331eb6275 100644 --- a/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml +++ b/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Lattice Slave SPI sysCONFIG FPGA manager maintainers: - - Ivan Bornyakov <i.bornyakov@metrotek.ru> + - Vladimir Georgiev <v.georgiev@metrotek.ru> description: | Lattice sysCONFIG port, which is used for FPGA configuration, among others, diff --git a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml index 527532f039ce..a157eecfb5fc 100644 --- a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml +++ b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip Polarfire FPGA manager. maintainers: - - Ivan Bornyakov <i.bornyakov@metrotek.ru> + - Vladimir Georgiev <v.georgiev@metrotek.ru> description: Device Tree Bindings for Microchip Polarfire FPGA Manager using slave SPI to diff --git a/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml index f47b6140a742..04dcadc2c20e 100644 --- a/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml +++ b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Zynq FPGA Manager maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml index ac6a207278d5..26f18834caa3 100644 --- a/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml +++ b/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Versal FPGA driver. maintainers: - - Nava kishore Manne <nava.manne@xilinx.com> + - Nava kishore Manne <nava.kishore.manne@amd.com> description: | Device Tree Versal FPGA bindings for the Versal SoC, controlled diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml index 00a8d92ff736..1390ae103b0b 100644 --- a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml +++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Zynq Ultrascale MPSoC FPGA Manager maintainers: - - Nava kishore Manne <navam@xilinx.com> + - Nava kishore Manne <nava.kishore.manne@amd.com> description: | Device Tree Bindings for Zynq Ultrascale MPSoC FPGA Manager. diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml index 4d69f79df859..62fcc2bd5d80 100644 --- a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- -$id: http://devicetree.org/schemas/gpio/brcm,bcm6345-gpio.yaml# +$id: http://devicetree.org/schemas/gpio/brcm,bcm63xx-gpio.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Broadcom BCM6345 GPIO controller +title: Broadcom BCM63xx GPIO controller maintainers: - Álvaro Fernández Rojas <noltari@gmail.com> @@ -18,8 +18,6 @@ description: |+ BCM6338 have 8-bit data and dirout registers, where GPIO state can be read and/or written, and the direction changed from input to output. - BCM6345 have 16-bit data and dirout registers, where GPIO state can be read - and/or written, and the direction changed from input to output. BCM6318, BCM6328, BCM6358, BCM6362, BCM6368 and BCM63268 have 32-bit data and dirout registers, where GPIO state can be read and/or written, and the direction changed from input to output. @@ -29,7 +27,6 @@ properties: enum: - brcm,bcm6318-gpio - brcm,bcm6328-gpio - - brcm,bcm6345-gpio - brcm,bcm6358-gpio - brcm,bcm6362-gpio - brcm,bcm6368-gpio @@ -64,17 +61,6 @@ additionalProperties: false examples: - | - gpio@fffe0406 { - compatible = "brcm,bcm6345-gpio"; - reg-names = "dirout", "dat"; - reg = <0xfffe0406 2>, <0xfffe040a 2>; - native-endian; - - gpio-controller; - #gpio-cells = <2>; - }; - - - | gpio@0 { compatible = "brcm,bcm63268-gpio"; reg-names = "dirout", "dat"; diff --git a/Documentation/devicetree/bindings/gpio/gpio-delay.yaml b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml new file mode 100644 index 000000000000..1cebc4058e27 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-delay.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO delay controller + +maintainers: + - Alexander Stein <linux@ew.tq-group.com> + +description: | + This binding describes an electrical setup where setting an GPIO output + is delayed by some external setup, e.g. RC circuit. + + +----------+ +-----------+ + | | VCC_B | | + | | | | | + | | VCC_A _ | | + | GPIO | | | R | Consumer | + |controller| ___ |_| | | + | | | | | | | + | [IOx|-------| |--+-----|-----+ | + | | |___| | | input | + | | | | | + +----------+ --- C +-----------+ + --- + | + - + GND + + If the input on the consumer is controlled by an open-drain signal + attached to an RC circuit the ramp-up delay is not under control + of the GPIO controller. + +properties: + compatible: + const: gpio-delay + + "#gpio-cells": + description: | + Specifies the pin, ramp-up and ramp-down delays. The + delays are specified in microseconds. + const: 3 + + gpios: + description: Array of GPIOs which output signal change is delayed + minItems: 1 + maxItems: 32 + + gpio-controller: true + + gpio-line-names: + minItems: 1 + maxItems: 32 + +required: + - compatible + - "#gpio-cells" + - gpio-controller + - gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + enable_delay: enable-delay { + compatible = "gpio-delay"; + #gpio-cells = <3>; + gpio-controller; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>, + <&gpio3 1 GPIO_ACTIVE_HIGH>; + }; + + consumer { + enable-gpios = <&enable_delay 0 130000 30000>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml b/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml new file mode 100644 index 000000000000..daadfb4926c3 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml @@ -0,0 +1,154 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-ep9301.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: EP93xx GPIO controller + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + - Bartosz Golaszewski <brgl@bgdev.pl> + - Nikita Shubin <nikita.shubin@maquefel.me> + +properties: + compatible: + oneOf: + - const: cirrus,ep9301-gpio + - items: + - enum: + - cirrus,ep9302-gpio + - cirrus,ep9307-gpio + - cirrus,ep9312-gpio + - cirrus,ep9315-gpio + - const: cirrus,ep9301-gpio + + reg: + minItems: 2 + items: + - description: data register + - description: direction register + - description: interrupt registers base + + reg-names: + minItems: 2 + items: + - const: data + - const: dir + - const: intr + + gpio-controller: true + + gpio-ranges: true + + "#gpio-cells": + const: 2 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts: + oneOf: + - maxItems: 1 + - description: port F has dedicated irq line for each gpio line + maxItems: 8 + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + gpio@80840000 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840000 0x04>, + <0x80840010 0x04>, + <0x80840090 0x1c>; + reg-names = "data", "dir", "intr"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + interrupt-parent = <&vic1>; + interrupts = <27>; + }; + + gpio@80840004 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840004 0x04>, + <0x80840014 0x04>, + <0x808400ac 0x1c>; + reg-names = "data", "dir", "intr"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + interrupt-parent = <&vic1>; + interrupts = <27>; + }; + + gpio@80840008 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840008 0x04>, + <0x80840018 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@8084000c { + compatible = "cirrus,ep9301-gpio"; + reg = <0x8084000c 0x04>, + <0x8084001c 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@80840020 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840020 0x04>, + <0x80840024 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@80840030 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840030 0x04>, + <0x80840034 0x04>, + <0x8084004c 0x1c>; + reg-names = "data", "dir", "intr"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + interrupts-extended = <&vic0 19>, <&vic0 20>, + <&vic0 21>, <&vic0 22>, + <&vic1 15>, <&vic1 16>, + <&vic1 17>, <&vic1 18>; + }; + + gpio@80840038 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840038 0x04>, + <0x8084003c 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@80840040 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840040 0x04>, + <0x80840044 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + }; + +... diff --git a/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml new file mode 100644 index 000000000000..b394e058256e --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-mmio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic MMIO GPIO + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + - Bartosz Golaszewski <brgl@bgdev.pl> + +description: + Some simple GPIO controllers may consist of a single data register or a pair + of set/clear-bit registers. Such controllers are common for glue logic in + FPGAs or ASICs. Commonly, these controllers are accessed over memory-mapped + NAND-style parallel busses. + +properties: + compatible: + enum: + - brcm,bcm6345-gpio + - ni,169445-nand-gpio + - wd,mbl-gpio # Western Digital MyBook Live memory-mapped GPIO controller + + big-endian: true + + '#gpio-cells': + const: 2 + + gpio-controller: true + + little-endian: true + + reg: + minItems: 1 + description: + A list of registers in the controller. The width of each register is + determined by its size. All registers must have the same width. The number + of GPIOs is set by the width, with bit 0 corresponding to GPIO 0. + items: + - description: + Register to READ the value of the GPIO lines. If GPIO line is high, + the bit will be set. If the GPIO line is low, the bit will be cleared. + This register may also be used to drive GPIOs if the SET register is + omitted. + - description: + Register to SET the value of the GPIO lines. Setting a bit in this + register will drive the GPIO line high. + - description: + Register to CLEAR the value of the GPIO lines. Setting a bit in this + register will drive the GPIO line low. If this register is omitted, + the SET register will be used to clear the GPIO lines as well, by + actively writing the line with 0. + - description: + Register to set the line as OUTPUT. Setting a bit in this register + will turn that line into an output line. Conversely, clearing a bit + will turn that line into an input. + - description: + Register to set this line as INPUT. Setting a bit in this register + will turn that line into an input line. Conversely, clearing a bit + will turn that line into an output. + + reg-names: + minItems: 1 + maxItems: 5 + items: + enum: + - dat + - set + - clr + - dirout + - dirin + + native-endian: true + + no-output: + $ref: /schemas/types.yaml#/definitions/flag + description: + If this property is present, the controller cannot drive the GPIO lines. + +required: + - compatible + - reg + - reg-names + - '#gpio-cells' + - gpio-controller + +additionalProperties: false + +examples: + - | + gpio@1f300010 { + compatible = "ni,169445-nand-gpio"; + reg = <0x1f300010 0x4>; + reg-names = "dat"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@e0100000 { + compatible = "wd,mbl-gpio"; + reg-names = "dat"; + reg = <0xe0100000 0x1>; + #gpio-cells = <2>; + gpio-controller; + no-output; + }; + + gpio@fffe0406 { + compatible = "brcm,bcm6345-gpio"; + reg-names = "dirout", "dat"; + reg = <0xfffe0406 2>, <0xfffe040a 2>; + native-endian; + gpio-controller; + #gpio-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml index 5b0134304e51..452f8972a965 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml @@ -24,6 +24,10 @@ properties: '#gpio-cells': const: 2 + gpio-line-names: + minItems: 4 + maxItems: 8 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt deleted file mode 100644 index b33f8f02c0d7..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt +++ /dev/null @@ -1,17 +0,0 @@ -STMPE gpio ----------- - -Required properties: - - compatible: "st,stmpe-gpio" - -Optional properties: - - st,norequest-mask: bitmask specifying which GPIOs should _not_ be requestable - due to different usage (e.g. touch, keypad) - -Node should be child node of stmpe node to which it belongs. - -Example: - stmpe_gpio { - compatible = "st,stmpe-gpio"; - st,norequest-mask = <0x20>; //gpio 5 can't be used - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml index d2c39dba56ad..7c2d152e8617 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml @@ -61,6 +61,13 @@ properties: gpio-ranges: maxItems: 1 +patternProperties: + "^.+-hog(-[0-9]+)?$": + type: object + + required: + - gpio-hog + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml index 572e1718f501..5e2496379a3c 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Zynq GPIO controller maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/gpio/ni,169445-nand-gpio.txt b/Documentation/devicetree/bindings/gpio/ni,169445-nand-gpio.txt deleted file mode 100644 index ca2f8c745a27..000000000000 --- a/Documentation/devicetree/bindings/gpio/ni,169445-nand-gpio.txt +++ /dev/null @@ -1,38 +0,0 @@ -Bindings for the National Instruments 169445 GPIO NAND controller - -The 169445 GPIO NAND controller has two memory mapped GPIO registers, one -for input (the ready signal) and one for output (control signals). It is -intended to be used with the GPIO NAND driver. - -Required properties: - - compatible: should be "ni,169445-nand-gpio" - - reg-names: must contain - "dat" - data register - - reg: address + size pairs describing the GPIO register sets; - order must correspond with the order of entries in reg-names - - #gpio-cells: must be set to 2. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low - - gpio-controller: Marks the device node as a gpio controller. - -Optional properties: - - no-output: disables driving output on the pins - -Examples: - gpio1: nand-gpio-out@1f300010 { - compatible = "ni,169445-nand-gpio"; - reg = <0x1f300010 0x4>; - reg-names = "dat"; - gpio-controller; - #gpio-cells = <2>; - }; - - gpio2: nand-gpio-in@1f300014 { - compatible = "ni,169445-nand-gpio"; - reg = <0x1f300014 0x4>; - reg-names = "dat"; - gpio-controller; - #gpio-cells = <2>; - no-output; - }; diff --git a/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml new file mode 100644 index 000000000000..22c0cae73425 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/st,stmpe-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectonics Port Expander (STMPE) GPIO Block + +description: + STMicroelectronics Port Expander (STMPE) is a series of slow + bus controllers for various expanded peripherals such as GPIO, keypad, + touchscreen, ADC, PWM or rotator. It can contain one or several different + peripherals connected to SPI or I2C. These bindings pertain to the + GPIO portions of these expanders. + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +properties: + compatible: + const: st,stmpe-gpio + + "#gpio-cells": + const: 2 + + "#interrupt-cells": + const: 2 + + gpio-controller: true + + interrupt-controller: true + + st,norequest-mask: + description: + A bitmask of GPIO lines that cannot be requested because for + for example not being connected to anything on the system + $ref: /schemas/types.yaml#/definitions/uint32 + +patternProperties: + "^.+-hog(-[0-9]+)?$": + type: object + + required: + - gpio-hog + +additionalProperties: false + +required: + - compatible + - "#gpio-cells" + - "#interrupt-cells" + - gpio-controller + - interrupt-controller diff --git a/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt b/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt deleted file mode 100644 index 038c3a6a1f4d..000000000000 --- a/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt +++ /dev/null @@ -1,38 +0,0 @@ -Bindings for the Western Digital's MyBook Live memory-mapped GPIO controllers. - -The Western Digital MyBook Live has two memory-mapped GPIO controllers. -Both GPIO controller only have a single 8-bit data register, where GPIO -state can be read and/or written. - -Required properties: - - compatible: should be "wd,mbl-gpio" - - reg-names: must contain - "dat" - data register - - reg: address + size pairs describing the GPIO register sets; - order must correspond with the order of entries in reg-names - - #gpio-cells: must be set to 2. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low - - gpio-controller: Marks the device node as a gpio controller. - -Optional properties: - - no-output: GPIOs are read-only. - -Examples: - gpio0: gpio0@e0000000 { - compatible = "wd,mbl-gpio"; - reg-names = "dat"; - reg = <0xe0000000 0x1>; - #gpio-cells = <2>; - gpio-controller; - }; - - gpio1: gpio1@e0100000 { - compatible = "wd,mbl-gpio"; - reg-names = "dat"; - reg = <0xe0100000 0x1>; - #gpio-cells = <2>; - gpio-controller; - no-output; - }; diff --git a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml index 31906c253940..1638cfe90f1c 100644 --- a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml @@ -44,6 +44,7 @@ patternProperties: - GPIO0 - GPIO1 - GPIO2 + - GPIO3 function: enum: diff --git a/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml index f333ee2288e7..c1060e5fcef3 100644 --- a/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml +++ b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx AXI GPIO controller maintainers: - - Neeli Srinivas <srinivas.neeli@xilinx.com> + - Neeli Srinivas <srinivas.neeli@amd.com> description: The AXI GPIO design provides a general purpose input/output interface diff --git a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml index 31c0fc345903..18e61aff2185 100644 --- a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml +++ b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml @@ -12,7 +12,7 @@ description: PS_MODE). Every pin can be configured as input/output. maintainers: - - Piyush Mehta <piyush.mehta@xilinx.com> + - Piyush Mehta <piyush.mehta@amd.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml index 0400a361875d..e796a1ff8c82 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -86,7 +86,7 @@ properties: const: 2 dynamic-power-coefficient: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: A u32 value that represents the running time dynamic power coefficient in units of uW/MHz/V^2. The diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml index 2a25384ca3ef..ca02baba5526 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml @@ -92,7 +92,7 @@ properties: dma-coherent: true dynamic-power-coefficient: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: A u32 value that represents the running time dynamic power coefficient in units of uW/MHz/V^2. The diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml index 318122d95eb5..0fae1ef013be 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml @@ -33,6 +33,7 @@ properties: - rockchip,rk3228-mali - samsung,exynos4210-mali - stericsson,db8500-mali + - xlnx,zynqmp-mali - const: arm,mali-400 - items: - enum: diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml new file mode 100644 index 000000000000..2dc8b07b4d3b --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,max31827.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch + +maintainers: + - Daniel Matyas <daniel.matyas@analog.com> + +description: | + Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch with + I2C Interface + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31827-MAX31829.pdf + +properties: + compatible: + oneOf: + - const: adi,max31827 + - items: + - enum: + - adi,max31828 + - adi,max31829 + - const: adi,max31827 + + reg: + maxItems: 1 + + vref-supply: + description: + Must have values in the interval (1.6V; 3.6V) in order for the device to + function correctly. + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@42 { + compatible = "adi,max31827"; + reg = <0x42>; + vref-supply = <®_vdd>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml index cb24d7b3221c..ff57c5416ebc 100644 --- a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml +++ b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Cadence I2C controller maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> allOf: - $ref: /schemas/i2c/i2c-controller.yaml# diff --git a/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml index 85d9efb743ee..d9ef86729011 100644 --- a/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml +++ b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml @@ -60,6 +60,7 @@ properties: default: 0 regstep: + $ref: /schemas/types.yaml#/definitions/uint32 description: | deprecated, use reg-shift above deprecated: true diff --git a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml index 62f3ca66274f..133855f11b4f 100644 --- a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml +++ b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml @@ -10,7 +10,7 @@ maintainers: - Conor Culhane <conor.culhane@silvaco.com> allOf: - - $ref: "i3c.yaml#" + - $ref: i3c.yaml# properties: compatible: @@ -44,7 +44,7 @@ required: - clock-names - clocks -additionalProperties: true +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml index d521d516088b..16def2985ab4 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml @@ -47,6 +47,9 @@ properties: avdd-supply: description: AVdd voltage supply + vref-supply: + description: VRef voltage supply + adi,rejection-60-Hz-enable: description: | This bit enables a notch at 60 Hz when the first notch of the sinc @@ -89,6 +92,7 @@ required: - interrupts - dvdd-supply - avdd-supply + - vref-supply - spi-cpol - spi-cpha @@ -115,6 +119,7 @@ examples: interrupt-parent = <&gpio>; dvdd-supply = <&dvdd>; avdd-supply = <&avdd>; + vref-supply = <&vref>; adi,refin2-pins-enable; adi,rejection-60-Hz-enable; diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml index 7f79a06e76f5..6168b44ea72c 100644 --- a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml @@ -26,6 +26,7 @@ properties: - mediatek,mt2712-auxadc - mediatek,mt6765-auxadc - mediatek,mt7622-auxadc + - mediatek,mt7986-auxadc - mediatek,mt8173-auxadc - items: - enum: diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml index 63369ba388e4..0a192ca192c5 100644 --- a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml @@ -39,6 +39,12 @@ properties: power-domains: maxItems: 1 + vref-supply: + description: | + External ADC reference voltage supply on VREFH pad. If VERID[MVI] is + set, there are additional, internal reference voltages selectable. + VREFH1 is always from VREFH pad. + "#io-channel-cells": const: 1 @@ -72,6 +78,7 @@ examples: assigned-clocks = <&clk IMX_SC_R_ADC_0>; assigned-clock-rates = <24000000>; power-domains = <&pd IMX_SC_R_ADC_0>; + vref-supply = <®_1v8>; #io-channel-cells = <1>; }; }; diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml index bd6e0d6f6e0c..ad7d6fc49de5 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -54,7 +54,7 @@ required: - '#io-channel-cells' patternProperties: - "^.*@[0-9a-f]+$": + "^channel@[0-9a-f]+$": type: object additionalProperties: false description: | @@ -101,7 +101,7 @@ patternProperties: oneOf: - items: - const: 1 - - enum: [ 1, 3, 4, 6, 20, 8, 10 ] + - enum: [ 1, 3, 4, 6, 20, 8, 10, 16 ] - items: - const: 10 - const: 81 @@ -148,7 +148,7 @@ allOf: then: patternProperties: - "^.*@[0-9a-f]+$": + "^channel@[0-9a-f]+$": properties: qcom,decimation: enum: [ 512, 1024, 2048, 4096 ] @@ -171,7 +171,7 @@ allOf: then: patternProperties: - "^.*@[0-9a-f]+$": + "^channel@[0-9a-f]+$": properties: qcom,decimation: enum: [ 256, 512, 1024 ] @@ -194,7 +194,7 @@ allOf: then: patternProperties: - "^.*@[0-9a-f]+$": + "^channel@[0-9a-f]+$": properties: qcom,decimation: enum: [ 250, 420, 840 ] @@ -217,7 +217,7 @@ allOf: then: patternProperties: - "^.*@[0-9a-f]+$": + "^channel@[0-9a-f]+$": properties: qcom,decimation: enum: [ 85, 340, 1360 ] @@ -249,7 +249,7 @@ examples: #io-channel-cells = <1>; /* Channel node */ - adc-chan@39 { + channel@39 { reg = <0x39>; qcom,decimation = <512>; qcom,ratiometric; @@ -258,19 +258,19 @@ examples: qcom,pre-scaling = <1 3>; }; - adc-chan@9 { + channel@9 { reg = <0x9>; }; - adc-chan@a { + channel@a { reg = <0xa>; }; - adc-chan@e { + channel@e { reg = <0xe>; }; - adc-chan@f { + channel@f { reg = <0xf>; }; }; @@ -292,16 +292,18 @@ examples: #io-channel-cells = <1>; /* Other properties are omitted */ - xo-therm@44 { + channel@44 { reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; + label = "xo_therm"; }; - conn-therm@47 { + channel@47 { reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>; qcom,ratiometric; qcom,hw-settle-time = <200>; + label = "conn_therm"; }; }; }; diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml index 1c7aee5ed3e0..36dff3250ea7 100644 --- a/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml @@ -90,7 +90,7 @@ patternProperties: of the MAX chips to the GyroADC, while MISO line of each Maxim ADC connects to a shared input pin of the GyroADC. enum: - - adi,7476 + - adi,ad7476 - fujitsu,mb88101a - maxim,max1162 - maxim,max11100 diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml index da50b529c157..aa24b841393c 100644 --- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml @@ -15,6 +15,7 @@ properties: - const: rockchip,saradc - const: rockchip,rk3066-tsadc - const: rockchip,rk3399-saradc + - const: rockchip,rk3588-saradc - items: - enum: - rockchip,px30-saradc diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml index df2589f214e1..dddf97b50549 100644 --- a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml +++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml @@ -13,7 +13,7 @@ description: | When an io-channel measures the midpoint of a voltage divider, the interesting voltage is often the voltage over the full resistance of the divider. This binding describes the voltage divider in such - a curcuit. + a circuit. Vin ----. | diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml index ec64d7877fe5..1db6952ddca5 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml @@ -31,6 +31,9 @@ properties: - invensense,mpu9250 - invensense,mpu9255 - items: + - const: invensense,icm20600 + - const: invensense,icm20602 + - items: - const: invensense,icm20608d - const: invensense,icm20608 diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml index b39f5217d8ff..ee8724ad33ab 100644 --- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml +++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml @@ -98,6 +98,7 @@ required: - reg allOf: + - $ref: /schemas/iio/iio.yaml# - $ref: /schemas/spi/spi-peripheral-props.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bu27008.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bu27008.yaml new file mode 100644 index 000000000000..4f66fd47b016 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/rohm,bu27008.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/rohm,bu27008.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BU27008 color sensor + +maintainers: + - Matti Vaittinen <mazziesaccount@gmail.com> + +description: + The ROHM BU27008 is a sensor with 5 photodiodes (red, green, blue, clear + and IR) with four configurable channels. Red and green being always + available and two out of the rest three (blue, clear, IR) can be + selected to be simultaneously measured. Typical application is adjusting + LCD backlight of TVs, mobile phones and tablet PCs. + +properties: + compatible: + const: rohm,bu27008 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@38 { + compatible = "rohm,bu27008"; + reg = <0x38>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/light/ti,opt4001.yaml b/Documentation/devicetree/bindings/iio/light/ti,opt4001.yaml new file mode 100644 index 000000000000..12b0c7ed5d72 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/ti,opt4001.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/ti,opt4001.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments OPT4001 Ambient Light Sensor + +maintainers: + - Stefan Windfeldt-Prytz <stefan.windfeldt-prytz@axis.com> + +description: + Ambient light sensor with an i2c interface. + Last part of compatible is for the packaging used. + Picostar is a 4 pinned SMT and sot-5x3 is a 8 pinned SOT. + https://www.ti.com/lit/gpn/opt4001 + +properties: + compatible: + enum: + - ti,opt4001-picostar + - ti,opt4001-sot-5x3 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: ti,opt4001-sot-5x3 + then: + properties: + interrupts: + maxItems: 1 + else: + properties: + interrupts: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@44 { + compatible = "ti,opt4001-sot-5x3"; + reg = <0x44>; + vdd-supply = <&vdd_reg>; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/potentiometer/renesas,x9250.yaml b/Documentation/devicetree/bindings/iio/potentiometer/renesas,x9250.yaml new file mode 100644 index 000000000000..ab5c09c00ff4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/potentiometer/renesas,x9250.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/potentiometer/renesas,x9250.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas X9250 quad potentiometers + +maintainers: + - Herve Codina <herve.codina@bootlin.com> + +description: + The Renesas X9250 integrates four digitally controlled potentiometers. + On each potentiometer, the X9250T has a 100 kOhms total resistance and the + X9250U has a 50 kOhms total resistance. + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + +properties: + compatible: + enum: + - renesas,x9250t + - renesas,x9250u + + reg: + maxItems: 1 + + vcc-supply: + description: + Regulator for the VCC power supply. + + avp-supply: + description: + Regulator for the analog V+ power supply. + + avn-supply: + description: + Regulator for the analog V- power supply. + + '#io-channel-cells': + const: 1 + + spi-max-frequency: + maximum: 2000000 + + wp-gpios: + maxItems: 1 + description: + GPIO connected to the write-protect pin. + +required: + - compatible + - reg + - vcc-supply + - avp-supply + - avn-supply + - '#io-channel-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + potentiometer@0 { + compatible = "renesas,x9250t"; + reg = <0>; + vcc-supply = <&vcc_regulator>; + avp-supply = <&avp_regulator>; + avn-supply = <&avp_regulator>; + wp-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + spi-max-frequency = <2000000>; + #io-channel-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml new file mode 100644 index 000000000000..c0a923febf13 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/honeywell,mprls0025pa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Honeywell mprls0025pa pressure sensor + +maintainers: + - Andreas Klinger <ak@it-klinger.de> + +description: | + Honeywell pressure sensor of model mprls0025pa. + + This sensor has an I2C and SPI interface. Only the I2C interface is + implemented. + + There are many models with different pressure ranges available. The vendor + calls them "mpr series". All of them have the identical programming model and + differ in the pressure range, unit and transfer function. + + To support different models one need to specify the pressure range as well as + the transfer function. Pressure range needs to be converted from its unit to + pascal. + + The transfer function defines the ranges of numerical values delivered by the + sensor. The minimal range value stands for the minimum pressure and the + maximum value also for the maximum pressure with linear relation inside the + range. + + Specifications about the devices can be found at: + https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/ + products/sensors/pressure-sensors/board-mount-pressure-sensors/ + micropressure-mpr-series/documents/ + sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf + +properties: + compatible: + const: honeywell,mprls0025pa + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + description: + Optional GPIO for resetting the device. + If not present the device is not resetted during the probe. + maxItems: 1 + + honeywell,pmin-pascal: + description: + Minimum pressure value the sensor can measure in pascal. + $ref: /schemas/types.yaml#/definitions/uint32 + + honeywell,pmax-pascal: + description: + Maximum pressure value the sensor can measure in pascal. + $ref: /schemas/types.yaml#/definitions/uint32 + + honeywell,transfer-function: + description: | + Transfer function which defines the range of valid values delivered by the + sensor. + 1 - A, 10% to 90% of 2^24 (1677722 .. 15099494) + 2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874) + 3 - C, 20% to 80% of 2^24 (3355443 .. 13421773) + $ref: /schemas/types.yaml#/definitions/uint32 + + vdd-supply: + description: provide VDD power to the sensor. + +required: + - compatible + - reg + - honeywell,pmin-pascal + - honeywell,pmax-pascal + - honeywell,transfer-function + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pressure@18 { + compatible = "honeywell,mprls0025pa"; + reg = <0x18>; + reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio3>; + interrupts = <21 IRQ_TYPE_EDGE_FALLING>; + honeywell,pmin-pascal = <0>; + honeywell,pmax-pascal = <172369>; + honeywell,transfer-function = <1>; + vdd-supply = <&vcc_3v3>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml index 1ff3afca9149..e450821a741d 100644 --- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml +++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml @@ -84,6 +84,7 @@ properties: - st,lps35hw - description: IMUs enum: + - st,lsm303d-imu - st,lsm9ds0-imu - description: Deprecated bindings enum: diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml index d6965a0c1cf3..654d31f65d36 100644 --- a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/temperature/melexis,mlx90614.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Melexis MLX90614 contactless IR temperature sensor +title: Melexis MLX90614/MLX90615 contactless IR temperature sensor maintainers: - Peter Meerwald <pmeerw@pmeerw.net> @@ -15,7 +15,9 @@ description: | properties: compatible: - const: melexis,mlx90614 + enum: + - melexis,mlx90614 + - melexis,mlx90615 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml new file mode 100644 index 000000000000..d43002b9bfdc --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/temperature/ti,tmp006.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TMP006 IR thermopile sensor + +maintainers: + - Peter Meerwald <pmeerw@pmeerw.net> + +description: | + TI TMP006 - Infrared Thermopile Sensor in Chip-Scale Package. + https://cdn.sparkfun.com/datasheets/Sensors/Temp/tmp006.pdf + +properties: + compatible: + const: ti,tmp006 + + reg: + maxItems: 1 + + vdd-supply: + description: provide VDD power to the sensor. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + temperature-sensor@40 { + compatible = "ti,tmp006"; + reg = <0x40>; + vdd-supply = <&ldo4_reg>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml index 3ec579d63570..c40799355ed7 100644 --- a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml @@ -14,6 +14,9 @@ description: | Atmel maXTouch touchscreen or touchpads such as the mXT244 and similar devices. +allOf: + - $ref: input.yaml# + properties: compatible: const: atmel,maxtouch @@ -60,6 +63,10 @@ properties: or experiment to determine which bit corresponds to which input. Use KEY_RESERVED for unused padding values. + linux,keycodes: + minItems: 1 + maxItems: 8 + atmel,wakeup-method: $ref: /schemas/types.yaml#/definitions/uint32 description: | diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.txt b/Documentation/devicetree/bindings/input/cypress,cyapa.txt deleted file mode 100644 index d3db65916a36..000000000000 --- a/Documentation/devicetree/bindings/input/cypress,cyapa.txt +++ /dev/null @@ -1,42 +0,0 @@ -Cypress I2C Touchpad - -Required properties: -- compatible: must be "cypress,cyapa". -- reg: I2C address of the chip. -- interrupts: interrupt to which the chip is connected (see interrupt - binding[0]). - -Optional properties: -- wakeup-source: touchpad can be used as a wakeup source. -- pinctrl-names: should be "default" (see pinctrl binding [1]). -- pinctrl-0: a phandle pointing to the pin settings for the device (see - pinctrl binding [1]). -- vcc-supply: a phandle for the regulator supplying 3.3V power. - -[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - -Example: - &i2c0 { - /* ... */ - - /* Cypress Gen3 touchpad */ - touchpad@67 { - compatible = "cypress,cyapa"; - reg = <0x67>; - interrupt-parent = <&gpio>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */ - wakeup-source; - }; - - /* Cypress Gen5 and later touchpad */ - touchpad@24 { - compatible = "cypress,cyapa"; - reg = <0x24>; - interrupt-parent = <&gpio>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */ - wakeup-source; - }; - - /* ... */ - }; diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.yaml b/Documentation/devicetree/bindings/input/cypress,cyapa.yaml new file mode 100644 index 000000000000..29515151abe9 --- /dev/null +++ b/Documentation/devicetree/bindings/input/cypress,cyapa.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/cypress,cyapa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cypress All Points Addressable (APA) I2C Touchpad / Trackpad + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +properties: + compatible: + const: cypress,cyapa + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + wakeup-source: true + + vcc-supply: + description: 3.3V power + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + trackpad@67 { + reg = <0x67>; + compatible = "cypress,cyapa"; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpx1>; + wakeup-source; + }; + }; diff --git a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml index ce18d7dadae2..1edad1da1196 100644 --- a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml +++ b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml @@ -43,6 +43,15 @@ properties: itself as long as it allows the main board to make signals compatible with what the touchscreen is expecting for its IO rails. + goodix,no-reset-during-suspend: + description: + Set this to true to enforce the driver to not assert the reset GPIO + during suspend. + Due to potential touchscreen hardware flaw, back-powering could happen in + suspend if the power supply is on and with active-low reset GPIO asserted. + This property is used to avoid the back-powering issue. + type: boolean + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml index 037c3ae9f1c3..e34c9e78d38d 100644 --- a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml +++ b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml @@ -55,7 +55,7 @@ patternProperties: interrupt-names: true - linux-keycodes: + linux,keycodes: maxItems: 1 wakeup-source: true diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.yaml b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml index d32716c604fe..6398534b43c3 100644 --- a/Documentation/devicetree/bindings/input/pwm-vibrator.yaml +++ b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml @@ -32,6 +32,8 @@ properties: minItems: 1 maxItems: 2 + enable-gpios: true + vcc-supply: true direction-duty-cycle-ns: diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml index 1959ec394768..4080422a9eb5 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml @@ -40,6 +40,8 @@ properties: linux,keycodes: description: EV_ABS specific event code generated by the axis. + wakeup-source: true + patternProperties: "^button@[0-9]+$": type: object diff --git a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml index f7a5e31c506e..fc21fe3e7b37 100644 --- a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml +++ b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml @@ -51,7 +51,7 @@ properties: type: object fsl,ddrc: - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to DDR Controller. diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt deleted file mode 100644 index bde63f8f090e..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt +++ /dev/null @@ -1,38 +0,0 @@ -Amlogic meson GPIO interrupt controller - -Meson SoCs contains an interrupt controller which is able to watch the SoC -pads and generate an interrupt on edge or level. The controller is essentially -a 256 pads to 8 GIC interrupt multiplexer, with a filter block to select edge -or level and polarity. It does not expose all 256 mux inputs because the -documentation shows that the upper part is not mapped to any pad. The actual -number of interrupt exposed depends on the SoC. - -Required properties: - -- compatible : must have "amlogic,meson8-gpio-intc" and either - "amlogic,meson8-gpio-intc" for meson8 SoCs (S802) or - "amlogic,meson8b-gpio-intc" for meson8b SoCs (S805) or - "amlogic,meson-gxbb-gpio-intc" for GXBB SoCs (S905) or - "amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912) - "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X) - "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2) - "amlogic,meson-sm1-gpio-intc" for SM1 SoCs (S905D3, S905X3, S905Y3) - "amlogic,meson-a1-gpio-intc" for A1 SoCs (A113L) - "amlogic,meson-s4-gpio-intc" for S4 SoCs (S802X2, S905Y4, S805X2G, S905W2) -- reg : Specifies base physical address and size of the registers. -- interrupt-controller : Identifies the node as an interrupt controller. -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. The value must be 2. -- meson,channel-interrupts: Array with the 8 upstream hwirq numbers. These - are the hwirqs used on the parent interrupt controller. - -Example: - -gpio_interrupt: interrupt-controller@9880 { - compatible = "amlogic,meson-gxbb-gpio-intc", - "amlogic,meson-gpio-intc"; - reg = <0x0 0x9880 0x0 0x10>; - interrupt-controller; - #interrupt-cells = <2>; - meson,channel-interrupts = <64 65 66 67 68 69 70 71>; -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml new file mode 100644 index 000000000000..e84e4f33b358 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/amlogic,meson-gpio-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson GPIO interrupt controller + +maintainers: + - Heiner Kallweit <hkallweit1@gmail.com> + +description: | + Meson SoCs contains an interrupt controller which is able to watch the SoC + pads and generate an interrupt on edge or level. The controller is essentially + a 256 pads to 8 or 12 GIC interrupt multiplexer, with a filter block to select + edge or level and polarity. It does not expose all 256 mux inputs because the + documentation shows that the upper part is not mapped to any pad. The actual + number of interrupts exposed depends on the SoC. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + oneOf: + - const: amlogic,meson-gpio-intc + - items: + - enum: + - amlogic,meson8-gpio-intc + - amlogic,meson8b-gpio-intc + - amlogic,meson-gxbb-gpio-intc + - amlogic,meson-gxl-gpio-intc + - amlogic,meson-axg-gpio-intc + - amlogic,meson-g12a-gpio-intc + - amlogic,meson-sm1-gpio-intc + - amlogic,meson-a1-gpio-intc + - amlogic,meson-s4-gpio-intc + - const: amlogic,meson-gpio-intc + + reg: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + amlogic,channel-interrupts: + description: Array with the upstream hwirq numbers + minItems: 8 + maxItems: 12 + $ref: /schemas/types.yaml#/definitions/uint32-array + +required: + - compatible + - reg + - interrupt-controller + - "#interrupt-cells" + - amlogic,channel-interrupts + +additionalProperties: false + +examples: + - | + interrupt-controller@9880 { + compatible = "amlogic,meson-gxbb-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x9880 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index 92117261e1e1..39e64c7f6360 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -166,6 +166,12 @@ properties: resets: maxItems: 1 + mediatek,broken-save-restore-fw: + type: boolean + description: + Asserts that the firmware on this device has issues saving and restoring + GICR registers when the GIC redistributors are powered off. + dependencies: mbi-ranges: [ msi-controller ] msi-controller: [ mbi-ranges ] diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml new file mode 100644 index 000000000000..393c128a41d8 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/loongson,eiointc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson Extended I/O Interrupt Controller + +maintainers: + - Binbin Zhou <zhoubinbin@loongson.cn> + +description: | + This interrupt controller is found on the Loongson-3 family chips and + Loongson-2K series chips and is used to distribute interrupts directly to + individual cores without forwarding them through the HT's interrupt line. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + enum: + - loongson,ls2k0500-eiointc + - loongson,ls2k2000-eiointc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + +unevaluatedProperties: false + +examples: + - | + eiointc: interrupt-controller@1fe11600 { + compatible = "loongson,ls2k0500-eiointc"; + reg = <0x1fe10000 0x10000>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <3>; + }; + +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/microchip,eic.yaml b/Documentation/devicetree/bindings/interrupt-controller/microchip,sama7g5-eic.yaml index 50003880ee6f..d56ba65b17d1 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/microchip,eic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/microchip,sama7g5-eic.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/interrupt-controller/microchip,eic.yaml# +$id: http://devicetree.org/schemas/interrupt-controller/microchip,sama7g5-eic.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip External Interrupt Controller diff --git a/Documentation/devicetree/bindings/interrupt-controller/ralink,rt2880-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ralink,rt2880-intc.yaml new file mode 100644 index 000000000000..0fa952a9edfd --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ralink,rt2880-intc.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/ralink,rt2880-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ralink SoCs Interrupt Controller + +maintainers: + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +description: + This interrupt controller support a central point for interrupt aggregation + for platform related blocks. + +properties: + compatible: + const: ralink,rt2880-intc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + +additionalProperties: false + +examples: + - | + interrupt-controller@200 { + compatible = "ralink,rt2880-intc"; + reg = <0x200 0x100>; + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml index f75736a061af..dc1f28e55266 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml @@ -57,14 +57,15 @@ properties: - const: andestech,nceplic100 - items: - enum: + - canaan,k210-plic - sifive,fu540-c000-plic - starfive,jh7100-plic - starfive,jh7110-plic - - canaan,k210-plic - const: sifive,plic-1.0.0 - items: - enum: - allwinner,sun20i-d1-plic + - thead,th1520-plic - const: thead,c900-plic - items: - const: sifive,plic-1.0.0 diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml index ba677d401e24..3a31a979709b 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml @@ -29,6 +29,7 @@ properties: - qcom,msm8996-smmu-v2 - qcom,msm8998-smmu-v2 - qcom,sdm630-smmu-v2 + - qcom,sm6375-smmu-v2 - const: qcom,smmu-v2 - description: Qcom SoCs implementing "qcom,smmu-500" and "arm,mmu-500" @@ -45,6 +46,7 @@ properties: - qcom,sdm845-smmu-500 - qcom,sdx55-smmu-500 - qcom,sdx65-smmu-500 + - qcom,sdx75-smmu-500 - qcom,sm6115-smmu-500 - qcom,sm6125-smmu-500 - qcom,sm6350-smmu-500 @@ -79,7 +81,9 @@ properties: - description: Qcom Adreno GPUs implementing "qcom,smmu-500" and "arm,mmu-500" items: - enum: + - qcom,sa8775p-smmu-500 - qcom,sc7280-smmu-500 + - qcom,sc8280xp-smmu-500 - qcom,sm6115-smmu-500 - qcom,sm6125-smmu-500 - qcom,sm8150-smmu-500 @@ -267,6 +271,7 @@ allOf: enum: - qcom,msm8998-smmu-v2 - qcom,sdm630-smmu-v2 + - qcom,sm6375-smmu-v2 then: anyOf: - properties: @@ -331,7 +336,10 @@ allOf: properties: compatible: contains: - const: qcom,sc7280-smmu-500 + enum: + - qcom,sa8775p-smmu-500 + - qcom,sc7280-smmu-500 + - qcom,sc8280xp-smmu-500 then: properties: clock-names: @@ -413,10 +421,8 @@ allOf: - nvidia,smmu-500 - qcom,qcm2290-smmu-500 - qcom,qdu1000-smmu-500 - - qcom,sa8775p-smmu-500 - qcom,sc7180-smmu-500 - qcom,sc8180x-smmu-500 - - qcom,sc8280xp-smmu-500 - qcom,sdm670-smmu-500 - qcom,sdm845-smmu-500 - qcom,sdx55-smmu-500 diff --git a/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml new file mode 100644 index 000000000000..feb5febaf361 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/awinic,aw200xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AWINIC AW200XX LED + +maintainers: + - Martin Kurbanov <mmkurbanov@sberdevices.ru> + +description: | + This controller is present on AW20036/AW20054/AW20072. + It is a 3x12/6x9/6x12 matrix LED programmed via + an I2C interface, up to 36/54/72 LEDs or 12/18/24 RGBs, + 3 pattern controllers for auto breathing or group dimming control. + + For more product information please see the link below: + aw20036 - https://www.awinic.com/en/productDetail/AW20036QNR#tech-docs + aw20054 - https://www.awinic.com/en/productDetail/AW20054QNR#tech-docs + aw20072 - https://www.awinic.com/en/productDetail/AW20072QNR#tech-docs + +properties: + compatible: + enum: + - awinic,aw20036 + - awinic,aw20054 + - awinic,aw20072 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + awinic,display-rows: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Leds matrix size + +patternProperties: + "^led@[0-9a-f]$": + type: object + $ref: common.yaml# + unevaluatedProperties: false + + properties: + reg: + description: + LED number + maxItems: 1 + + led-max-microamp: + default: 9780 + description: | + Note that a driver will take the minimum of all LED limits + since the chip has a single global setting. + The maximum output current of each LED is calculated by the + following formula: + IMAXled = 160000 * (592 / 600.5) * (1 / display-rows) + And the minimum output current formula: + IMINled = 3300 * (592 / 600.5) * (1 / display-rows) + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - awinic,display-rows + +allOf: + - if: + properties: + compatible: + contains: + const: awinic,aw20036 + then: + properties: + awinic,display-rows: + enum: [1, 2, 3] + else: + properties: + awinic,display-rows: + enum: [1, 2, 3, 4, 5, 6, 7] + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@3a { + compatible = "awinic,aw20036"; + reg = <0x3a>; + #address-cells = <1>; + #size-cells = <0>; + awinic,display-rows = <3>; + + led@0 { + reg = <0x0>; + color = <LED_COLOR_ID_RED>; + led-max-microamp = <9780>; + }; + + led@1 { + reg = <0x1>; + color = <LED_COLOR_ID_GREEN>; + led-max-microamp = <9780>; + }; + + led@2 { + reg = <0x2>; + color = <LED_COLOR_ID_BLUE>; + led-max-microamp = <9780>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml index e1191453c2f0..c914e1276982 100644 --- a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml @@ -21,6 +21,9 @@ properties: compatible: const: kinetic,ktz8866 + reg: + maxItems: 1 + vddpos-supply: description: positive boost supply regulator. @@ -33,6 +36,7 @@ properties: current-num-sinks: description: number of the LED current sinks' channels. + $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2, 3, 4, 5, 6] kinetic,current-ramp-delay-ms: @@ -53,6 +57,7 @@ properties: required: - compatible + - reg - vddpos-supply - vddneg-supply - enable-gpios @@ -63,14 +68,19 @@ examples: - | #include <dt-bindings/gpio/gpio.h> - backlight { - compatible = "kinetic,ktz8866"; - - vddpos-supply = <&bl_vddpos_5p5>; - vddneg-supply = <&bl_vddneg_5p5>; - enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>; - current-num-sinks = <5>; - kinetic,current-ramp-delay-ms = <128>; - kinetic,led-enable-ramp-delay-ms = <1>; - kinetic,enable-lcd-bias; + i2c { + #address-cells = <1>; + #size-cells = <0>; + + backlight@11 { + compatible = "kinetic,ktz8866"; + reg = <0x11>; + vddpos-supply = <&bl_vddpos_5p5>; + vddneg-supply = <&bl_vddneg_5p5>; + enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>; + current-num-sinks = <5>; + kinetic,current-ramp-delay-ms = <128>; + kinetic,led-enable-ramp-delay-ms = <1>; + kinetic,enable-lcd-bias; + }; }; diff --git a/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml new file mode 100644 index 000000000000..9416e1bfab92 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml @@ -0,0 +1,149 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/lp855x-backlight.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments LP855X backlight controllers + +maintainers: + - Artur Weber <aweber.kernel@gmail.com> + +properties: + compatible: + enum: + - ti,lp8550 + - ti,lp8551 + - ti,lp8552 + - ti,lp8553 + - ti,lp8555 + - ti,lp8556 + - ti,lp8557 + + reg: + maxItems: 1 + + dev-ctrl: + $ref: /schemas/types.yaml#/definitions/uint8 + description: + Value of device control register. This is a device-specific value. + + bl-name: + $ref: /schemas/types.yaml#/definitions/string + description: Backlight device name. + + init-brt: + $ref: /schemas/types.yaml#/definitions/uint8 + description: Initial value of backlight brightness. + + power-supply: + description: Regulator which controls the 3V rail. + + enable-supply: + description: Regulator which controls the EN/VDDIO input. + + pwms: + maxItems: 1 + description: | + PWM channel to use for controlling the backlight; setting this + enables the PWM-based backlight control mode. + + pwm-names: true + + pwm-period: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + PWM period value. Deprecated; set the period value in the pwms + property instead. + deprecated: true + +patternProperties: + "^rom-[0-9a-f]{2}h$": + type: object + description: Nodes containing the values of configuration registers. + additionalProperties: false + properties: + rom-addr: + $ref: /schemas/types.yaml#/definitions/uint8 + description: Register address of ROM area to be updated. + + rom-val: + $ref: /schemas/types.yaml#/definitions/uint8 + description: Value to write to the ROM register. + +required: + - compatible + - reg + - dev-ctrl + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + backlight@2c { + compatible = "ti,lp8555"; + reg = <0x2c>; + + dev-ctrl = /bits/ 8 <0x00>; + + pwms = <&pwm 0 10000>; + pwm-names = "lp8555"; + + /* 4V OV, 4 output LED0 string enabled */ + rom-14h { + rom-addr = /bits/ 8 <0x14>; + rom-val = /bits/ 8 <0xcf>; + }; + + /* Heavy smoothing, 24ms ramp time step */ + rom-15h { + rom-addr = /bits/ 8 <0x15>; + rom-val = /bits/ 8 <0xc7>; + }; + + /* 4 output LED1 string enabled */ + rom-19h { + rom-addr = /bits/ 8 <0x19>; + rom-val = /bits/ 8 <0x0f>; + }; + }; + }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + backlight@2c { + compatible = "ti,lp8556"; + reg = <0x2c>; + + bl-name = "lcd-bl"; + dev-ctrl = /bits/ 8 <0x85>; + init-brt = /bits/ 8 <0x10>; + }; + }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + backlight@2c { + compatible = "ti,lp8557"; + reg = <0x2c>; + enable-supply = <&backlight_vddio>; + power-supply = <&backlight_vdd>; + + dev-ctrl = /bits/ 8 <0x41>; + init-brt = /bits/ 8 <0x0a>; + + /* 4V OV, 4 output LED string enabled */ + rom-14h { + rom-addr = /bits/ 8 <0x14>; + rom-val = /bits/ 8 <0xcf>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/backlight/lp855x.txt b/Documentation/devicetree/bindings/leds/backlight/lp855x.txt deleted file mode 100644 index 88f56641fc28..000000000000 --- a/Documentation/devicetree/bindings/leds/backlight/lp855x.txt +++ /dev/null @@ -1,72 +0,0 @@ -lp855x bindings - -Required properties: - - compatible: "ti,lp8550", "ti,lp8551", "ti,lp8552", "ti,lp8553", - "ti,lp8555", "ti,lp8556", "ti,lp8557" - - reg: I2C slave address (u8) - - dev-ctrl: Value of DEVICE CONTROL register (u8). It depends on the device. - -Optional properties: - - bl-name: Backlight device name (string) - - init-brt: Initial value of backlight brightness (u8) - - pwm-period: PWM period value. Set only PWM input mode used (u32) - - rom-addr: Register address of ROM area to be updated (u8) - - rom-val: Register value to be updated (u8) - - power-supply: Regulator which controls the 3V rail - - enable-supply: Regulator which controls the EN/VDDIO input - -Example: - - /* LP8555 */ - backlight@2c { - compatible = "ti,lp8555"; - reg = <0x2c>; - - dev-ctrl = /bits/ 8 <0x00>; - pwm-period = <10000>; - - /* 4V OV, 4 output LED0 string enabled */ - rom_14h { - rom-addr = /bits/ 8 <0x14>; - rom-val = /bits/ 8 <0xcf>; - }; - - /* Heavy smoothing, 24ms ramp time step */ - rom_15h { - rom-addr = /bits/ 8 <0x15>; - rom-val = /bits/ 8 <0xc7>; - }; - - /* 4 output LED1 string enabled */ - rom_19h { - rom-addr = /bits/ 8 <0x19>; - rom-val = /bits/ 8 <0x0f>; - }; - }; - - /* LP8556 */ - backlight@2c { - compatible = "ti,lp8556"; - reg = <0x2c>; - - bl-name = "lcd-bl"; - dev-ctrl = /bits/ 8 <0x85>; - init-brt = /bits/ 8 <0x10>; - }; - - /* LP8557 */ - backlight@2c { - compatible = "ti,lp8557"; - reg = <0x2c>; - enable-supply = <&backlight_vddio>; - power-supply = <&backlight_vdd>; - - dev-ctrl = /bits/ 8 <0x41>; - init-brt = /bits/ 8 <0x0a>; - - /* 4V OV, 4 output LED string enabled */ - rom_14h { - rom-addr = /bits/ 8 <0x14>; - rom-val = /bits/ 8 <0xcf>; - }; - }; diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml index 5ec47a8c6568..535690288990 100644 --- a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml @@ -68,7 +68,6 @@ dependencies: required: - compatible - pwms - - power-supply additionalProperties: false diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index 11aedf1650a1..58b492d00246 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -105,8 +105,6 @@ properties: - audio-mute # LED indicates bluetooth power state - bluetooth-power - # LED indicates activity of all CPUs - - cpu # LED indicates camera flash state - flash # LED indicated keyboard capslock diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml index 31840e33dcf5..e850a8894758 100644 --- a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml +++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml @@ -34,7 +34,7 @@ required: - color allOf: - - $ref: "common.yaml#" + - $ref: common.yaml# additionalProperties: true diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml index ae607911f1db..058be1fedbc8 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml @@ -66,6 +66,14 @@ properties: '#size-cells': const: 0 + ti,charge-pump-mode: + description: + Set the operating mode of the internal charge pump as defined in + <dt-bindings/leds/leds-lp55xx.h>. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 3 # auto + maximum: 3 + patternProperties: '^multi-led@[0-8]$': type: object @@ -152,6 +160,7 @@ additionalProperties: false examples: - | #include <dt-bindings/leds/common.h> + #include <dt-bindings/leds/leds-lp55xx.h> i2c { #address-cells = <1>; @@ -164,6 +173,7 @@ examples: reg = <0x32>; clock-mode = /bits/ 8 <2>; pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */ + ti,charge-pump-mode = <LP55XX_CP_BYPASS>; led@0 { reg = <0>; diff --git a/Documentation/devicetree/bindings/leds/leds-mt6323.txt b/Documentation/devicetree/bindings/leds/leds-mt6323.txt index 73353692efa1..052dccb8f2ce 100644 --- a/Documentation/devicetree/bindings/leds/leds-mt6323.txt +++ b/Documentation/devicetree/bindings/leds/leds-mt6323.txt @@ -12,7 +12,10 @@ For MediaTek PMIC wrapper bindings see: Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml Required properties: -- compatible : Must be "mediatek,mt6323-led" +- compatible : Must be one of + - "mediatek,mt6323-led" + - "mediatek,mt6331-led" + - "mediatek,mt6332-led" - address-cells : Must be 1 - size-cells : Must be 0 diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml index 6295c91f43e8..e6f1999cb22f 100644 --- a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml +++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml @@ -16,18 +16,24 @@ description: > properties: compatible: - enum: - - qcom,pm660l-lpg - - qcom,pm8150b-lpg - - qcom,pm8150l-lpg - - qcom,pm8350c-pwm - - qcom,pm8916-pwm - - qcom,pm8941-lpg - - qcom,pm8994-lpg - - qcom,pmc8180c-lpg - - qcom,pmi8994-lpg - - qcom,pmi8998-lpg - - qcom,pmk8550-pwm + oneOf: + - enum: + - qcom,pm660l-lpg + - qcom,pm8150b-lpg + - qcom,pm8150l-lpg + - qcom,pm8350c-pwm + - qcom,pm8916-pwm + - qcom,pm8941-lpg + - qcom,pm8994-lpg + - qcom,pmc8180c-lpg + - qcom,pmi632-lpg + - qcom,pmi8994-lpg + - qcom,pmi8998-lpg + - qcom,pmk8550-pwm + - items: + - enum: + - qcom,pm8550-pwm + - const: qcom,pm8350c-pwm "#pwm-cells": const: 2 diff --git a/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml index 4d2ffe5fcfc7..37d2a93780ab 100644 --- a/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml +++ b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml @@ -20,6 +20,7 @@ properties: compatible: enum: - ocs,ocp8110 + - richtek,rt5033-led - sgmicro,sgm3140 enable-gpios: diff --git a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml index ffacf703d9f9..a8736fd5a539 100644 --- a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml +++ b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml @@ -26,6 +26,8 @@ properties: - qcom,pm8150c-flash-led - qcom,pm8150l-flash-led - qcom,pm8350c-flash-led + - qcom,pm8550-flash-led + - qcom,pmi8998-flash-led - const: qcom,spmi-flash-led reg: diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml index 64b0be9cf70b..58f0d94c6d71 100644 --- a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml +++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml @@ -32,7 +32,7 @@ patternProperties: properties: rohm,led-compatible: description: LED identification string - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: - bd71828-ambled - bd71828-grnled diff --git a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt deleted file mode 100644 index b48d7d30012c..000000000000 --- a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt +++ /dev/null @@ -1,26 +0,0 @@ -Broadcom BCM2835 VideoCore mailbox IPC - -Required properties: - -- compatible: Should be "brcm,bcm2835-mbox" -- reg: Specifies base physical address and size of the registers -- interrupts: The interrupt number - See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt -- #mbox-cells: Specifies the number of cells needed to encode a mailbox - channel. The value shall be 0, since there is only one - mailbox channel implemented by the device. - -Example: - -mailbox: mailbox@7e00b880 { - compatible = "brcm,bcm2835-mbox"; - reg = <0x7e00b880 0x40>; - interrupts = <0 1>; - #mbox-cells = <0>; -}; - -firmware: firmware { - compatible = "raspberrypi,firmware"; - mboxes = <&mailbox>; - #power-domain-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.yaml b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.yaml new file mode 100644 index 000000000000..9588817f4511 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/brcm,bcm2835-mbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM2835 VideoCore mailbox IPC + +maintainers: + - Stefan Wahren <stefan.wahren@i2se.com> + +properties: + compatible: + const: brcm,bcm2835-mbox + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#mbox-cells": + const: 0 + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + mailbox@7e00b880 { + compatible = "brcm,bcm2835-mbox"; + reg = <0x7e00b880 0x40>; + interrupts = <0 1>; + #mbox-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml index a3e87516d637..2d14fc948999 100644 --- a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml +++ b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml @@ -66,6 +66,7 @@ properties: oneOf: - const: nvidia,tegra186-hsp - const: nvidia,tegra194-hsp + - const: nvidia,tegra264-hsp - items: - const: nvidia,tegra234-hsp - const: nvidia,tegra194-hsp diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml index 32d7bbc98cac..d2e25ff6db7f 100644 --- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml +++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml @@ -18,6 +18,7 @@ properties: oneOf: - items: - enum: + - qcom,ipq5018-apcs-apps-global - qcom,ipq5332-apcs-apps-global - qcom,ipq8074-apcs-apps-global - qcom,ipq9574-apcs-apps-global diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml index 374ffe64016f..aeaddbf574b0 100644 --- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml +++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml @@ -33,7 +33,7 @@ description: | +------------------------------------------+ maintainers: - - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> + - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml index 444f24838d3d..6c72e77b927c 100644 --- a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml @@ -65,9 +65,14 @@ properties: properties: data-lanes: true + bus-type: + enum: + - 1 # MEDIA_BUS_TYPE_CSI2_CPHY + - 4 # MEDIA_BUS_TYPE_CSI2_DPHY required: - data-lanes + - bus-type required: - port@4 @@ -82,6 +87,7 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> i2c@e6508000 { #address-cells = <1>; @@ -101,6 +107,7 @@ examples: port@4 { reg = <4>; max96712_out0: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; clock-lanes = <0>; data-lanes = <1 2 3 4>; remote-endpoint = <&csi40_in>; diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml index 8b389314c352..e2ffe0a9c26b 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml @@ -49,6 +49,7 @@ properties: properties: data-lanes: + minItems: 1 maxItems: 2 required: diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml index eb1499912c58..9cc0a968a401 100644 --- a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml @@ -155,7 +155,7 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8916.h> - camss: camss@1b00000 { + camss: camss@1b0ac00 { compatible = "qcom,msm8916-camss"; clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml index 8a10aa1cafc5..5cb0e337ea6e 100644 --- a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml @@ -221,7 +221,7 @@ examples: #include <dt-bindings/clock/qcom,gcc-msm8996.h> #include <dt-bindings/clock/qcom,mmcc-msm8996.h> - camss: camss@a00000 { + camss: camss@a34000 { compatible = "qcom,msm8996-camss"; clocks = <&mmcc CAMSS_TOP_AHB_CLK>, diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml index 0a109e126064..584106e275f6 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml @@ -227,7 +227,7 @@ examples: #include <dt-bindings/clock/qcom,gcc-sdm660.h> #include <dt-bindings/clock/qcom,mmcc-sdm660.h> - camss: camss@ca00000 { + camss: camss@ca00020 { compatible = "qcom,sdm660-camss"; clocks = <&mmcc CAMSS_AHB_CLK>, diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml index 1530ad0d80bd..ec4380a0a03f 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml @@ -219,7 +219,7 @@ examples: #address-cells = <2>; #size-cells = <2>; - camss: camss@a00000 { + camss: camss@acb3000 { compatible = "qcom,sdm845-camss"; clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, diff --git a/Documentation/devicetree/bindings/media/rockchip-rga.yaml b/Documentation/devicetree/bindings/media/rockchip-rga.yaml index dd645ddccb07..ea2342222408 100644 --- a/Documentation/devicetree/bindings/media/rockchip-rga.yaml +++ b/Documentation/devicetree/bindings/media/rockchip-rga.yaml @@ -21,7 +21,9 @@ properties: - const: rockchip,rk3288-rga - const: rockchip,rk3399-rga - items: - - const: rockchip,rk3228-rga + - enum: + - rockchip,rk3228-rga + - rockchip,rk3568-rga - const: rockchip,rk3288-rga reg: diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml index ee622a8ee1cc..772ec3283bc6 100644 --- a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml +++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml @@ -24,6 +24,7 @@ properties: - rockchip,rk3399-vpu - rockchip,px30-vpu - rockchip,rk3568-vpu + - rockchip,rk3588-av1-vpu - items: - const: rockchip,rk3188-vpu - const: rockchip,rk3066-vpu diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt index 8eb90c043d5d..e69de29bb2d1 100644 --- a/Documentation/devicetree/bindings/media/s5p-mfc.txt +++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt @@ -1,78 +0,0 @@ -* Samsung Multi Format Codec (MFC) - -Multi Format Codec (MFC) is the IP present in Samsung SoCs which -supports high resolution decoding and encoding functionalities. -The MFC device driver is a v4l2 driver which can encode/decode -video raw/elementary streams and has support for all popular -video codecs. - -Required properties: - - compatible : value should be either one among the following - (a) "samsung,mfc-v5" for MFC v5 present in Exynos4 SoCs - (b) "samsung,mfc-v6" for MFC v6 present in Exynos5 SoCs - (c) "samsung,exynos3250-mfc", "samsung,mfc-v7" for MFC v7 - present in Exynos3250 SoC - (d) "samsung,mfc-v7" for MFC v7 present in Exynos5420 SoC - (e) "samsung,mfc-v8" for MFC v8 present in Exynos5800 SoC - (f) "samsung,exynos5433-mfc" for MFC v8 present in Exynos5433 SoC - (g) "samsung,mfc-v10" for MFC v10 present in Exynos7880 SoC - - - reg : Physical base address of the IP registers and length of memory - mapped region. - - - interrupts : MFC interrupt number to the CPU. - - clocks : from common clock binding: handle to mfc clock. - - clock-names : from common clock binding: must contain "mfc", - corresponding to entry in the clocks property. - -Optional properties: - - power-domains : power-domain property defined with a phandle - to respective power domain. - - memory-region : from reserved memory binding: phandles to two reserved - memory regions, first is for "left" mfc memory bus interfaces, - second if for the "right" mfc memory bus, used when no SYSMMU - support is available; used only by MFC v5 present in Exynos4 SoCs - -Obsolete properties: - - samsung,mfc-r, samsung,mfc-l : support removed, please use memory-region - property instead - - -Example: -SoC specific DT entry: - -mfc: codec@13400000 { - compatible = "samsung,mfc-v5"; - reg = <0x13400000 0x10000>; - interrupts = <0 94 0>; - power-domains = <&pd_mfc>; - clocks = <&clock 273>; - clock-names = "mfc"; -}; - -Reserved memory specific DT entry for given board (see reserved memory binding -for more information): - -reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - mfc_left: region@51000000 { - compatible = "shared-dma-pool"; - no-map; - reg = <0x51000000 0x800000>; - }; - - mfc_right: region@43000000 { - compatible = "shared-dma-pool"; - no-map; - reg = <0x43000000 0x800000>; - }; -}; - -Board specific DT entry: - -codec@13400000 { - memory-region = <&mfc_left>, <&mfc_right>; -}; diff --git a/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml b/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml new file mode 100644 index 000000000000..084b44582a43 --- /dev/null +++ b/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/samsung,s5p-mfc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos Multi Format Codec (MFC) + +maintainers: + - Marek Szyprowski <m.szyprowski@samsung.com> + - Aakarsh Jain <aakarsh.jain@samsung.com> + +description: + Multi Format Codec (MFC) is the IP present in Samsung SoCs which + supports high resolution decoding and encoding functionalities. + +properties: + compatible: + oneOf: + - enum: + - samsung,exynos5433-mfc # Exynos5433 + - samsung,mfc-v5 # Exynos4 + - samsung,mfc-v6 # Exynos5 + - samsung,mfc-v7 # Exynos5420 + - samsung,mfc-v8 # Exynos5800 + - samsung,mfc-v10 # Exynos7880 + - items: + - enum: + - samsung,exynos3250-mfc # Exynos3250 + - const: samsung,mfc-v7 # Fall back for Exynos3250 + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + maxItems: 3 + + interrupts: + maxItems: 1 + + iommus: + minItems: 1 + maxItems: 2 + + iommu-names: + minItems: 1 + maxItems: 2 + + power-domains: + maxItems: 1 + + memory-region: + minItems: 1 + maxItems: 2 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos3250-mfc + then: + properties: + clocks: + maxItems: 2 + clock-names: + items: + - const: mfc + - const: sclk_mfc + iommus: + maxItems: 1 + iommus-names: false + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos5433-mfc + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: pclk + - const: aclk + - const: aclk_xiu + iommus: + maxItems: 2 + iommus-names: + items: + - const: left + - const: right + + - if: + properties: + compatible: + contains: + enum: + - samsung,mfc-v5 + then: + properties: + clocks: + maxItems: 2 + clock-names: + items: + - const: mfc + - const: sclk_mfc + iommus: + maxItems: 2 + iommus-names: + items: + - const: left + - const: right + + - if: + properties: + compatible: + contains: + enum: + - samsung,mfc-v6 + - samsung,mfc-v8 + then: + properties: + clocks: + maxItems: 1 + clock-names: + items: + - const: mfc + iommus: + maxItems: 2 + iommus-names: + items: + - const: left + - const: right + + - if: + properties: + compatible: + contains: + enum: + - samsung,mfc-v7 + then: + properties: + clocks: + minItems: 1 + maxItems: 2 + iommus: + minItems: 1 + maxItems: 2 + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + #include <dt-bindings/clock/exynos-audss-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + codec@13400000 { + compatible = "samsung,mfc-v5"; + reg = <0x13400000 0x10000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_mfc>; + clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>; + clock-names = "mfc", "sclk_mfc"; + iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; + iommu-names = "left", "right"; + }; diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml index 7d77823dbb7a..43daf837fc9f 100644 --- a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml +++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx MIPI CSI-2 Receiver Subsystem maintainers: - - Vishal Sagar <vishal.sagar@xilinx.com> + - Vishal Sagar <vishal.sagar@amd.com> description: | The Xilinx MIPI CSI-2 Receiver Subsystem is used to capture MIPI CSI-2 diff --git a/Documentation/devicetree/bindings/memory-controllers/nuvoton,npcm-memory-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/nuvoton,npcm-memory-controller.yaml new file mode 100644 index 000000000000..ac1a5a17749d --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/nuvoton,npcm-memory-controller.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/nuvoton,npcm-memory-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM Memory Controller + +maintainers: + - Marvin Lin <kflin@nuvoton.com> + - Stanley Chu <yschu@nuvoton.com> + +description: | + The Nuvoton BMC SoC supports DDR4 memory with or without ECC (error correction + check). + + The memory controller supports single bit error correction, double bit error + detection (in-line ECC in which a section (1/8th) of the memory device used to + store data is used for ECC storage). + + Note, the bootloader must configure ECC mode for the memory controller. + +properties: + compatible: + enum: + - nuvoton,npcm750-memory-controller + - nuvoton,npcm845-memory-controller + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mc: memory-controller@f0824000 { + compatible = "nuvoton,npcm750-memory-controller"; + reg = <0xf0824000 0x1000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml index 2fa44951cfde..f54e553e6c0e 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml @@ -165,7 +165,7 @@ patternProperties: const: 0 lpddr2: - $ref: "ddr/jedec,lpddr2.yaml#" + $ref: ddr/jedec,lpddr2.yaml# type: object patternProperties: diff --git a/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml b/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml index e68c4306025a..87ff9ee098f5 100644 --- a/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml @@ -8,8 +8,7 @@ title: Synopsys DesignWare Universal Multi-Protocol Memory Controller maintainers: - Krzysztof Kozlowski <krzk@kernel.org> - - Manish Narani <manish.narani@xilinx.com> - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> description: | Synopsys DesignWare Enhanced uMCTL2 DDR Memory Controller is capable of diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml index bc9406929f6c..b049837ee669 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml @@ -129,7 +129,7 @@ patternProperties: The child device node represents the device connected to the GPMC bus. The device can be a NAND chip, SRAM device, NOR device or an ASIC. - $ref: "ti,gpmc-child.yaml" + $ref: ti,gpmc-child.yaml required: diff --git a/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml index 8f72e2f8588a..75143db51411 100644 --- a/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml @@ -8,8 +8,7 @@ title: Zynq A05 DDR Memory Controller maintainers: - Krzysztof Kozlowski <krzk@kernel.org> - - Manish Narani <manish.narani@xilinx.com> - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> description: The Zynq DDR ECC controller has an optional ECC support in half-bus width diff --git a/Documentation/devicetree/bindings/mfd/adi,max77541.yaml b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml new file mode 100644 index 000000000000..c7895b2c38c9 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/adi,max77541.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAX77540/MAX77541 PMIC from ADI + +maintainers: + - Okan Sahin <okan.sahin@analog.com> + +description: | + MAX77540 is a Power Management IC with 2 buck regulators. + + MAX77541 is a Power Management IC with 2 buck regulators and 1 ADC. + +properties: + compatible: + enum: + - adi,max77540 + - adi,max77541 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + regulators: + $ref: /schemas/regulator/adi,max77541-regulator.yaml# + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@69 { + compatible = "adi,max77541"; + reg = <0x69>; + interrupt-parent = <&gpio>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + + regulators { + buck1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <5200000>; + regulator-boot-on; + regulator-always-on; + }; + buck2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <5200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml index 148f1da47603..9f9a14af875e 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml @@ -35,11 +35,11 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: "../gpio/brcm,bcm63xx-gpio.yaml" description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml index 7e582243ea76..803277dd2725 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml @@ -35,11 +35,11 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: "../gpio/brcm,bcm63xx-gpio.yaml" description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml index 2230848e11c3..b9a6856ce970 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml @@ -35,11 +35,11 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: "../gpio/brcm,bcm63xx-gpio.yaml" description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml index c06693b6f7aa..4651fe4dde07 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml @@ -35,11 +35,11 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: "../gpio/brcm,bcm63xx-gpio.yaml" description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml index c560bede0e37..0330b621fd38 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml @@ -35,11 +35,11 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: "../gpio/brcm,bcm63xx-gpio.yaml" description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml index c534f5f2404e..82d3e4415bda 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml @@ -35,11 +35,11 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: "../gpio/brcm,bcm63xx-gpio.yaml" description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node diff --git a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml index 8459d3642205..3b3beab9db3f 100644 --- a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Canaan Kendryte K210 System Controller maintainers: - - Damien Le Moal <damien.lemoal@wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: Canaan Inc. Kendryte K210 SoC system controller which provides a diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml index acb9c54942d9..dc379f3ebf24 100644 --- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml +++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml @@ -122,12 +122,6 @@ patternProperties: compatible: const: gw,gsc-fan - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - reg: description: The fan controller base address maxItems: 1 @@ -135,8 +129,6 @@ patternProperties: required: - compatible - reg - - "#address-cells" - - "#size-cells" required: - compatible @@ -194,8 +186,6 @@ examples: }; fan-controller@2c { - #address-cells = <1>; - #size-cells = <0>; compatible = "gw,gsc-fan"; reg = <0x2c>; }; diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml index 36de335a33aa..8b9a2008a354 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml @@ -71,6 +71,7 @@ properties: - qcom,pm8998 - qcom,pma8084 - qcom,pmd9635 + - qcom,pmi632 - qcom,pmi8950 - qcom,pmi8962 - qcom,pmi8994 @@ -133,6 +134,7 @@ patternProperties: oneOf: - $ref: /schemas/power/supply/qcom,pm8941-charger.yaml# - $ref: /schemas/power/supply/qcom,pm8941-coincell.yaml# + - $ref: /schemas/power/supply/qcom,pmi8998-charger.yaml# "gpio@[0-9a-f]+$": type: object @@ -146,6 +148,10 @@ patternProperties: type: object $ref: /schemas/nvmem/qcom,spmi-sdam.yaml# + "phy@[0-9a-f]+$": + type: object + $ref: /schemas/phy/qcom,snps-eusb2-repeater.yaml# + "pon@[0-9a-f]+$": type: object $ref: /schemas/power/reset/qcom,pon.yaml# diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml index fe790af7b4fb..5ad9d5deaaf8 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml @@ -34,6 +34,7 @@ properties: - qcom,tcsr-ipq5332 - qcom,tcsr-ipq6018 - qcom,tcsr-ipq8064 + - qcom,tcsr-ipq8074 - qcom,tcsr-ipq9574 - qcom,tcsr-mdm9615 - qcom,tcsr-msm8226 diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml new file mode 100644 index 000000000000..386b1a50158a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/richtek,rt5033.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT5033 Power Management Integrated Circuit + +maintainers: + - Jakob Hauser <jahau@rocketmail.com> + +description: + RT5033 is a multifunction device which includes battery charger, fuel gauge, + flash LED current source, LDO and synchronous Buck converter for portable + applications. It is interfaced to host controller using I2C interface. The + battery fuel gauge uses a separate I2C bus. + +properties: + compatible: + const: richtek,rt5033 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + regulators: + description: + The regulators of RT5033 have to be instantiated under a sub-node named + "regulators". For SAFE_LDO voltage there is only one value of 4.9 V. LDO + voltage ranges from 1.2 V to 3.0 V in 0.1 V steps. BUCK voltage ranges + from 1.0 V to 3.0 V in 0.1 V steps. + type: object + patternProperties: + "^(SAFE_LDO|LDO|BUCK)$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + additionalProperties: false + + charger: + type: object + $ref: /schemas/power/supply/richtek,rt5033-charger.yaml# + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + battery: battery { + compatible = "simple-battery"; + precharge-current-microamp = <450000>; + constant-charge-current-max-microamp = <1000000>; + charge-term-current-microamp = <150000>; + precharge-upper-limit-microvolt = <3500000>; + constant-charge-voltage-max-microvolt = <4350000>; + }; + + extcon { + usb_con: connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + fuel-gauge@35 { + compatible = "richtek,rt5033-battery"; + reg = <0x35>; + + interrupt-parent = <&msmgpio>; + interrupts = <121 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&fg_alert_default>; + + power-supplies = <&rt5033_charger>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + pmic@34 { + compatible = "richtek,rt5033"; + reg = <0x34>; + + interrupt-parent = <&msmgpio>; + interrupts = <62 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_default>; + + regulators { + safe_ldo_reg: SAFE_LDO { + regulator-name = "SAFE_LDO"; + regulator-min-microvolt = <4900000>; + regulator-max-microvolt = <4900000>; + regulator-always-on; + }; + ldo_reg: LDO { + regulator-name = "LDO"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + buck_reg: BUCK { + regulator-name = "BUCK"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + + rt5033_charger: charger { + compatible = "richtek,rt5033-charger"; + monitored-battery = <&battery>; + richtek,usb-connector = <&usb_con>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml new file mode 100644 index 000000000000..cf2500f2e9a0 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml @@ -0,0 +1,406 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk806.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK806 Power Management Integrated Circuit + +maintainers: + - Sebastian Reichel <sebastian.reichel@collabora.com> + +description: + Rockchip RK806 series PMIC. This device consists of an spi or + i2c controlled MFD that includes multiple switchable regulators. + +properties: + compatible: + enum: + - rockchip,rk806 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + vcc1-supply: + description: + The input supply for dcdc-reg1. + + vcc2-supply: + description: + The input supply for dcdc-reg2. + + vcc3-supply: + description: + The input supply for dcdc-reg3. + + vcc4-supply: + description: + The input supply for dcdc-reg4. + + vcc5-supply: + description: + The input supply for dcdc-reg5. + + vcc6-supply: + description: + The input supply for dcdc-reg6. + + vcc7-supply: + description: + The input supply for dcdc-reg7. + + vcc8-supply: + description: + The input supply for dcdc-reg8. + + vcc9-supply: + description: + The input supply for dcdc-reg9. + + vcc10-supply: + description: + The input supply for dcdc-reg10. + + vcc11-supply: + description: + The input supply for pldo-reg1, pldo-reg2 and pldo-reg3. + + vcc12-supply: + description: + The input supply for pldo-reg4 and pldo-reg5. + + vcc13-supply: + description: + The input supply for nldo-reg1, nldo-reg2 and nldo-reg3. + + vcc14-supply: + description: + The input supply for nldo-reg4 and nldo-reg5. + + vcca-supply: + description: + The input supply for pldo-reg6. + + regulators: + type: object + additionalProperties: false + patternProperties: + "^(dcdc-reg([1-9]|10)|pldo-reg[1-6]|nldo-reg[1-5])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + +patternProperties: + '-pins$': + type: object + additionalProperties: false + $ref: /schemas/pinctrl/pinmux-node.yaml + + properties: + function: + enum: [pin_fun0, pin_fun1, pin_fun2, pin_fun3, pin_fun4, pin_fun5] + + pins: + $ref: /schemas/types.yaml#/definitions/string + enum: [gpio_pwrctrl1, gpio_pwrctrl2, gpio_pwrctrl3] + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc5v0_sys>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu_mem_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_mem_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vdd_vdenc_mem_s0: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd2_ddr_s3: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v1_nldo_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "avcc_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd1_1v8_ddr_s3: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd1_1v8_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_1v8_s3: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v8_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + master_pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "master_pldo6_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_0v75_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd2l_0v9_ddr_s3: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd2l_0v9_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + master_nldo3: nldo-reg3 { + regulator-name = "master_nldo3"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_0v75_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml index 10c7b408f33a..aea0b7d57d04 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml +++ b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml @@ -153,29 +153,18 @@ dependencies: additionalProperties: false allOf: - - if: + - not: required: - s5m8767,pmic-buck2-uses-gpio-dvs - then: - properties: - s5m8767,pmic-buck3-uses-gpio-dvs: false - s5m8767,pmic-buck4-uses-gpio-dvs: false - - - if: - required: - s5m8767,pmic-buck3-uses-gpio-dvs - then: - properties: - s5m8767,pmic-buck2-uses-gpio-dvs: false - s5m8767,pmic-buck4-uses-gpio-dvs: false - - - if: + - not: required: + - s5m8767,pmic-buck2-uses-gpio-dvs + - s5m8767,pmic-buck4-uses-gpio-dvs + - not: + required: + - s5m8767,pmic-buck3-uses-gpio-dvs - s5m8767,pmic-buck4-uses-gpio-dvs - then: - properties: - s5m8767,pmic-buck2-uses-gpio-dvs: false - s5m8767,pmic-buck3-uses-gpio-dvs: false examples: - | diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml index 9573e4af949e..97c61097f9e2 100644 --- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml @@ -184,7 +184,7 @@ properties: additionalProperties: false patternProperties: - "^(buck[1-4]|ldo[1-6]|boost|pwr_sw[1-2])-supply$": + "^(buck[1-4]|ldo[1-6]|vref_ddr|boost|pwr_sw[1-2])-supply$": description: STPMIC1 voltage regulators supplies "^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$": diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml index 0c98d913747b..e6289fbe6907 100644 --- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml @@ -101,7 +101,7 @@ examples: }; clock-controller@4140 { - compatible = "ti,am654-ehrpwm-tbclk", "syscon"; + compatible = "ti,am654-ehrpwm-tbclk"; reg = <0x4140 0x18>; #clock-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml new file mode 100644 index 000000000000..9d43376bebed --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,tps6594.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TPS6594 Power Management Integrated Circuit + +maintainers: + - Julien Panis <jpanis@baylibre.com> + +description: + TPS6594 is a Power Management IC which provides regulators and others + features like GPIOs, RTC, watchdog, ESMs (Error Signal Monitor), and + PFSM (Pre-configurable Finite State Machine) managing the state of the device. + TPS6594 is the super-set device while TPS6593 and LP8764 are derivatives. + +properties: + compatible: + enum: + - ti,lp8764-q1 + - ti,tps6593-q1 + - ti,tps6594-q1 + + reg: + description: I2C slave address or SPI chip select number. + maxItems: 1 + + ti,primary-pmic: + type: boolean + description: | + Identify the primary PMIC on SPMI bus. + A multi-PMIC synchronization scheme is implemented in the PMIC device + to synchronize the power state changes with other PMIC devices. This is + accomplished through a SPMI bus: the primary PMIC is the controller + device on the SPMI bus, and the secondary PMICs are the target devices + on the SPMI bus. + + system-power-controller: true + + gpio-controller: true + + '#gpio-cells': + const: 2 + description: | + The first cell is the pin number, the second cell is used to specify flags. + See ../gpio/gpio.txt for more information. + + interrupts: + maxItems: 1 + + regulators: + type: object + description: List of regulators provided by this controller. + + patternProperties: + "^buck([1-5]|12|34|123|1234)$": + type: object + $ref: /schemas/regulator/regulator.yaml# + + unevaluatedProperties: false + + "^ldo[1-4]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + + unevaluatedProperties: false + + allOf: + - if: + required: + - buck12 + then: + properties: + buck123: false + buck1234: false + - if: + required: + - buck123 + then: + properties: + buck34: false + - if: + required: + - buck1234 + then: + properties: + buck34: false + + additionalProperties: false + +patternProperties: + "^buck([1-5]|12|34|123|1234)-supply$": + description: Input supply phandle for each buck. + + "^ldo[1-4]-supply$": + description: Input supply phandle for each ldo. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tps6593: pmic@48 { + compatible = "ti,tps6593-q1"; + reg = <0x48>; + ti,primary-pmic; + system-power-controller; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&mcu_gpio0>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + + buck123-supply = <&vcc_3v3_sys>; + buck4-supply = <&vcc_3v3_sys>; + buck5-supply = <&vcc_3v3_sys>; + ldo1-supply = <&vcc_3v3_sys>; + ldo2-supply = <&vcc_3v3_sys>; + ldo3-supply = <&buck5>; + ldo4-supply = <&vcc_3v3_sys>; + + regulators { + buck123: buck123 { + regulator-name = "vcc_core"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4: buck4 { + regulator-name = "vcc_1v1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: buck5 { + regulator-name = "vcc_1v8_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: ldo1 { + regulator-name = "vddshv5_sdio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: ldo2 { + regulator-name = "vpp_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: ldo3 { + regulator-name = "vcc_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: ldo4 { + regulator-name = "vdda_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml index f7f0f2c0421a..9ad55746133b 100644 --- a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml +++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml @@ -90,6 +90,7 @@ properties: oneOf: - enum: - x-powers,axp152 + - x-powers,axp192 - x-powers,axp202 - x-powers,axp209 - x-powers,axp221 diff --git a/Documentation/devicetree/bindings/mips/ralink.yaml b/Documentation/devicetree/bindings/mips/ralink.yaml index 704b5b595127..53c1f6635377 100644 --- a/Documentation/devicetree/bindings/mips/ralink.yaml +++ b/Documentation/devicetree/bindings/mips/ralink.yaml @@ -80,6 +80,7 @@ properties: - enum: - gnubee,gb-pc1 - gnubee,gb-pc2 + - tplink,hc220-g5-v1 - const: mediatek,mt7621-soc additionalProperties: true diff --git a/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt b/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt deleted file mode 100644 index 05b47232ed9e..000000000000 --- a/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt +++ /dev/null @@ -1,15 +0,0 @@ -Broadcom Secure Monitor Bounce buffer ------------------------------------------------------ -This binding defines the location of the bounce buffer -used for non-secure to secure communications. - -Required properties: -- compatible : "brcm,kona-smc" -- DEPRECATED: compatible : "bcm,kona-smc" -- reg : Location and size of bounce buffer - -Example: - smc@3404c000 { - compatible = "brcm,bcm11351-smc", "brcm,kona-smc"; - reg = <0x3404c000 0x400>; //1 KiB in SRAM - }; diff --git a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml index 1ab9588cdd89..2dc3e245fa5d 100644 --- a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml +++ b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml @@ -36,7 +36,7 @@ properties: description: A list of channels tied to this function, used for matching the function to a set of virtual channels. - $ref: "/schemas/types.yaml#/definitions/string-array" + $ref: /schemas/types.yaml#/definitions/string-array items: - const: fastrpcglink-apps-dsp @@ -48,14 +48,14 @@ properties: qcom,smd-channels: description: Channel name used for the RPM communication - $ref: "/schemas/types.yaml#/definitions/string-array" + $ref: /schemas/types.yaml#/definitions/string-array items: - const: fastrpcsmd-apps-dsp qcom,vmids: description: Virtual machine IDs for remote processor. - $ref: "/schemas/types.yaml#/definitions/uint32-array" + $ref: /schemas/types.yaml#/definitions/uint32-array "#address-cells": const: 1 diff --git a/Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml b/Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml new file mode 100644 index 000000000000..0c9a8444844c --- /dev/null +++ b/Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/ti,j721e-esm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 ESM + +maintainers: + - Neha Malcom Francis <n-francis@ti.com> + +description: + The ESM (Error Signaling Module) is an IP block on TI K3 devices + that allows handling of safety events somewhat similar to what interrupt + controller would do. The safety signals have their separate paths within + the SoC, and they are handled by the ESM, which routes them to the proper + destination, which can be system reset, interrupt controller, etc. In the + simplest configuration the signals are just routed to reset the SoC. + +properties: + compatible: + const: ti,j721e-esm + + reg: + maxItems: 1 + + ti,esm-pins: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + integer array of ESM interrupt pins to route to external event pin + which can be used to reset the SoC. + minItems: 1 + maxItems: 255 + +required: + - compatible + - reg + - ti,esm-pins + +additionalProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + esm@700000 { + compatible = "ti,j721e-esm"; + reg = <0x0 0x700000 0x0 0x1000>; + ti,esm-pins = <344>, <345>; + }; + }; diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml index 1c96da04f0e5..2459a55ed540 100644 --- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml +++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml @@ -53,10 +53,11 @@ properties: items: - const: arm,pl18x - const: arm,primecell - - description: Entry for STMicroelectronics variant of PL18x. - This dedicated compatible is used by bootloaders. + - description: Entries for STMicroelectronics variant of PL18x. items: - - const: st,stm32-sdmmc2 + - enum: + - st,stm32-sdmmc2 + - st,stm32mp25-sdmmc2 - const: arm,pl18x - const: arm,primecell diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt deleted file mode 100644 index d876580ae3b8..000000000000 --- a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt +++ /dev/null @@ -1,23 +0,0 @@ -Broadcom BCM2835 SDHOST controller - -This file documents differences between the core properties described -by mmc.txt and the properties that represent the BCM2835 controller. - -Required properties: -- compatible: Should be "brcm,bcm2835-sdhost". -- clocks: The clock feeding the SDHOST controller. - -Optional properties: -- dmas: DMA channel for read and write. - See Documentation/devicetree/bindings/dma/dma.txt for details - -Example: - -sdhost: mmc@7e202000 { - compatible = "brcm,bcm2835-sdhost"; - reg = <0x7e202000 0x100>; - interrupts = <2 24>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - dmas = <&dma 13>; - dma-names = "rx-tx"; -}; diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.yaml b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.yaml new file mode 100644 index 000000000000..3a5a44800675 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/brcm,bcm2835-sdhost.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM2835 SDHOST controller + +maintainers: + - Stefan Wahren <stefan.wahren@i2se.com> + +allOf: + - $ref: mmc-controller.yaml + +properties: + compatible: + const: brcm,bcm2835-sdhost + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + dmas: + maxItems: 1 + + dma-names: + const: rx-tx + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm2835.h> + + sdhost: mmc@7e202000 { + compatible = "brcm,bcm2835-sdhost"; + reg = <0x7e202000 0x100>; + interrupts = <2 24>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + dmas = <&dma 13>; + dma-names = "rx-tx"; + bus-width = <4>; + }; diff --git a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt deleted file mode 100644 index 7f5dd83f5bd9..000000000000 --- a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt +++ /dev/null @@ -1,21 +0,0 @@ -Broadcom BCM281xx SDHCI - -This file documents differences between the core properties in mmc.txt -and the properties present in the bcm281xx SDHCI - -Required properties: -- compatible : Should be "brcm,kona-sdhci" -- DEPRECATED: compatible : Should be "bcm,kona-sdhci" -- clocks: phandle + clock specifier pair of the external clock - -Refer to clocks/clock-bindings.txt for generic clock consumer properties. - -Example: - -sdio2: sdio@3f1a0000 { - compatible = "brcm,kona-sdhci"; - reg = <0x3f1a0000 0x10000>; - clocks = <&sdio3_clk>; - interrupts = <0x0 74 0x4>; -}; - diff --git a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.yaml b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.yaml new file mode 100644 index 000000000000..12eb3988f824 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/brcm,kona-sdhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Kona family SDHCI controller + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +allOf: + - $ref: sdhci-common.yaml# + +properties: + compatible: + const: brcm,kona-sdhci + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/bcm281xx.h> + + mmc@3f1a0000 { + compatible = "brcm,kona-sdhci"; + reg = <0x3f1a0000 0x10000>; + clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO3>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + }; +... diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml index fbfd822b9270..82eb7a24c857 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml @@ -42,6 +42,7 @@ properties: - enum: - fsl,imx6sll-usdhc - fsl,imx6ull-usdhc + - fsl,imx6ul-usdhc - const: fsl,imx6sx-usdhc - items: - const: fsl,imx7d-usdhc diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml index 4f2d9e8127dd..6da28e630577 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml @@ -36,11 +36,14 @@ properties: - enum: - qcom,ipq5018-sdhci - qcom,ipq5332-sdhci + - qcom,ipq6018-sdhci - qcom,ipq9574-sdhci - qcom,qcm2290-sdhci - qcom,qcs404-sdhci + - qcom,qdu1000-sdhci - qcom,sc7180-sdhci - qcom,sc7280-sdhci + - qcom,sc8280xp-sdhci - qcom,sdm630-sdhci - qcom,sdm670-sdhci - qcom,sdm845-sdhci diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml index 9a88870cd865..054b6b8bf9b9 100644 --- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml @@ -49,13 +49,12 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: reg: minimum: 0 maximum: 7 - nand-ecc-mode: true - nand-ecc-algo: const: bch @@ -75,7 +74,7 @@ patternProperties: minimum: 0 maximum: 1 - additionalProperties: false + unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml index 28fb9a7dd70f..787ef488dd5b 100644 --- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml @@ -40,6 +40,7 @@ properties: patternProperties: "^nand@[0-7]$": type: object + $ref: raw-nand-chip.yaml properties: reg: minimum: 0 @@ -58,6 +59,14 @@ patternProperties: meson-gxl-nfc 8, 16, 24, 30, 40, 50, 60 meson-axg-nfc 8 + nand-rb: + maxItems: 1 + items: + maximum: 0 + + unevaluatedProperties: false + + required: - compatible - reg @@ -87,6 +96,7 @@ examples: nand@0 { reg = <0>; + nand-rb = <0>; }; }; diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml index 1571024aa119..f57e96374e67 100644 --- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml +++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml @@ -114,6 +114,7 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: compatible: const: brcm,nandcs @@ -136,6 +137,8 @@ patternProperties: layout. $ref: /schemas/types.yaml#/definitions/uint32 + unevaluatedProperties: false + allOf: - $ref: nand-controller.yaml# - if: diff --git a/Documentation/devicetree/bindings/mtd/denali,nand.yaml b/Documentation/devicetree/bindings/mtd/denali,nand.yaml index 0be83ad42970..81f95538d415 100644 --- a/Documentation/devicetree/bindings/mtd/denali,nand.yaml +++ b/Documentation/devicetree/bindings/mtd/denali,nand.yaml @@ -63,6 +63,12 @@ properties: minItems: 1 maxItems: 2 +patternProperties: + "^nand@[a-f0-9]$": + type: object + $ref: raw-nand-chip.yaml + unevaluatedProperties: false + allOf: - $ref: nand-controller.yaml @@ -74,7 +80,6 @@ allOf: then: patternProperties: "^nand@[a-f0-9]$": - type: object properties: nand-ecc-strength: enum: @@ -92,7 +97,6 @@ allOf: then: patternProperties: "^nand@[a-f0-9]$": - type: object properties: nand-ecc-strength: enum: @@ -111,7 +115,6 @@ allOf: then: patternProperties: "^nand@[a-f0-9]$": - type: object properties: nand-ecc-strength: enum: diff --git a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml index a7bdb5d3675c..b9312ebefeb9 100644 --- a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml +++ b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml @@ -39,7 +39,9 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: + rb-gpios: description: GPIO specifier for the busy pin. maxItems: 1 @@ -48,6 +50,8 @@ patternProperties: description: GPIO specifier for the write-protect pin. maxItems: 1 + unevaluatedProperties: false + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml index cc3def758e00..07bc7e3efd3a 100644 --- a/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml +++ b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml @@ -42,17 +42,16 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: reg: minimum: 0 maximum: 1 - nand-ecc-mode: true - nand-ecc-algo: const: hw - additionalProperties: false + unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml new file mode 100644 index 000000000000..a10729bb1840 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml @@ -0,0 +1,226 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/marvell,nand-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell NAND Flash Controller (NFC) + +maintainers: + - Miquel Raynal <miquel.raynal@bootlin.com> + +properties: + compatible: + oneOf: + - items: + - const: marvell,armada-8k-nand-controller + - const: marvell,armada370-nand-controller + - enum: + - marvell,armada370-nand-controller + - marvell,pxa3xx-nand-controller + - description: legacy bindings + deprecated: true + enum: + - marvell,armada-8k-nand + - marvell,armada370-nand + - marvell,pxa3xx-nand + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: + Shall reference the NAND controller clocks, the second one is + is only needed for the Armada 7K/8K SoCs + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: core + - const: reg + + dmas: + maxItems: 1 + + dma-names: + items: + - const: data + + marvell,system-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: Syscon node that handles NAND controller related registers + +patternProperties: + "^nand@[a-f0-9]$": + type: object + $ref: raw-nand-chip.yaml + + properties: + reg: + minimum: 0 + maximum: 3 + + nand-rb: + items: + - minimum: 0 + maximum: 1 + + nand-ecc-step-size: + const: 512 + + nand-ecc-strength: + enum: [1, 4, 8, 12, 16] + + nand-ecc-mode: + const: hw + + marvell,nand-keep-config: + $ref: /schemas/types.yaml#/definitions/flag + description: + Orders the driver not to take the timings from the core and + leaving them completely untouched. Bootloader timings will then + be used. + + marvell,nand-enable-arbiter: + $ref: /schemas/types.yaml#/definitions/flag + description: + To enable the arbiter, all boards blindly used it, + this bit was set by the bootloader for many boards and even if + it is marked reserved in several datasheets, it might be needed to set + it (otherwise it is harmless). + deprecated: true + + required: + - reg + - nand-rb + + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + +allOf: + - $ref: nand-controller.yaml# + + - if: + properties: + compatible: + contains: + const: marvell,pxa3xx-nand-controller + then: + required: + - dmas + - dma-names + + - if: + properties: + compatible: + contains: + const: marvell,armada-8k-nand-controller + then: + properties: + clocks: + minItems: 2 + + clock-names: + minItems: 2 + + required: + - marvell,system-controller + + else: + properties: + clocks: + minItems: 1 + + clock-names: + minItems: 1 + + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + nand_controller: nand-controller@d0000 { + compatible = "marvell,armada370-nand-controller"; + reg = <0xd0000 0x54>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&coredivclk 0>; + + nand@0 { + reg = <0>; + label = "main-storage"; + nand-rb = <0>; + nand-ecc-mode = "hw"; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Rootfs"; + reg = <0x00000000 0x40000000>; + }; + }; + }; + }; + + - | + cp0_nand_controller: nand-controller@720000 { + compatible = "marvell,armada-8k-nand-controller", + "marvell,armada370-nand-controller"; + reg = <0x720000 0x54>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&cp0_clk 1 2>, + <&cp0_clk 1 17>; + marvell,system-controller = <&cp0_syscon0>; + + nand@0 { + reg = <0>; + label = "main-storage"; + nand-rb = <0>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + }; + }; + + - | + nand-controller@43100000 { + compatible = "marvell,pxa3xx-nand-controller"; + reg = <0x43100000 90>; + interrupts = <45>; + clocks = <&clks 1>; + clock-names = "core"; + dmas = <&pdma 97 3>; + dma-names = "data"; + #address-cells = <1>; + #size-cells = <0>; + nand@0 { + reg = <0>; + nand-rb = <0>; + nand-ecc-mode = "hw"; + marvell,nand-keep-config; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mtd/marvell-nand.txt b/Documentation/devicetree/bindings/mtd/marvell-nand.txt deleted file mode 100644 index a2d9a0f2b683..000000000000 --- a/Documentation/devicetree/bindings/mtd/marvell-nand.txt +++ /dev/null @@ -1,126 +0,0 @@ -Marvell NAND Flash Controller (NFC) - -Required properties: -- compatible: can be one of the following: - * "marvell,armada-8k-nand-controller" - * "marvell,armada370-nand-controller" - * "marvell,pxa3xx-nand-controller" - * "marvell,armada-8k-nand" (deprecated) - * "marvell,armada370-nand" (deprecated) - * "marvell,pxa3xx-nand" (deprecated) - Compatibles marked deprecated support only the old bindings described - at the bottom. -- reg: NAND flash controller memory area. -- #address-cells: shall be set to 1. Encode the NAND CS. -- #size-cells: shall be set to 0. -- interrupts: shall define the NAND controller interrupt. -- clocks: shall reference the NAND controller clocks, the second one is - is only needed for the Armada 7K/8K SoCs -- clock-names: mandatory if there is a second clock, in this case there - should be one clock named "core" and another one named "reg" -- marvell,system-controller: Set to retrieve the syscon node that handles - NAND controller related registers (only required with the - "marvell,armada-8k-nand[-controller]" compatibles). - -Optional properties: -- label: see partition.txt. New platforms shall omit this property. -- dmas: shall reference DMA channel associated to the NAND controller. - This property is only used with "marvell,pxa3xx-nand[-controller]" - compatible strings. -- dma-names: shall be "rxtx". - This property is only used with "marvell,pxa3xx-nand[-controller]" - compatible strings. - -Optional children nodes: -Children nodes represent the available NAND chips. - -Required properties: -- reg: shall contain the native Chip Select ids (0-3). -- nand-rb: see nand-controller.yaml (0-1). - -Optional properties: -- marvell,nand-keep-config: orders the driver not to take the timings - from the core and leaving them completely untouched. Bootloader - timings will then be used. -- label: MTD name. -- nand-on-flash-bbt: see nand-controller.yaml. -- nand-ecc-mode: see nand-controller.yaml. Will use hardware ECC if not specified. -- nand-ecc-algo: see nand-controller.yaml. This property is essentially useful when - not using hardware ECC. Howerver, it may be added when using hardware - ECC for clarification but will be ignored by the driver because ECC - mode is chosen depending on the page size and the strength required by - the NAND chip. This value may be overwritten with nand-ecc-strength - property. -- nand-ecc-strength: see nand-controller.yaml. -- nand-ecc-step-size: see nand-controller.yaml. Marvell's NAND flash controller does - use fixed strength (1-bit for Hamming, 16-bit for BCH), so the actual - step size will shrink or grow in order to fit the required strength. - Step sizes are not completely random for all and follow certain - patterns described in AN-379, "Marvell SoC NFC ECC". - -See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on -generic bindings. - - -Example: -nand_controller: nand-controller@d0000 { - compatible = "marvell,armada370-nand-controller"; - reg = <0xd0000 0x54>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&coredivclk 0>; - - nand@0 { - reg = <0>; - label = "main-storage"; - nand-rb = <0>; - nand-ecc-mode = "hw"; - marvell,nand-keep-config; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "Rootfs"; - reg = <0x00000000 0x40000000>; - }; - }; - }; -}; - - -Note on legacy bindings: One can find, in not-updated device trees, -bindings slightly different than described above with other properties -described below as well as the partitions node at the root of a so -called "nand" node (without clear controller/chip separation). - -Legacy properties: -- marvell,nand-enable-arbiter: To enable the arbiter, all boards blindly - used it, this bit was set by the bootloader for many boards and even if - it is marked reserved in several datasheets, it might be needed to set - it (otherwise it is harmless) so whether or not this property is set, - the bit is selected by the driver. -- num-cs: Number of chip-select lines to use, all boards blindly set 1 - to this and for a reason, other values would have failed. The value of - this property is ignored. - -Example: - - nand0: nand@43100000 { - compatible = "marvell,pxa3xx-nand"; - reg = <0x43100000 90>; - interrupts = <45>; - dmas = <&pdma 97 0>; - dma-names = "rxtx"; - #address-cells = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - num-cs = <1>; - /* Partitions (optional) */ - }; diff --git a/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml b/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml index a6e7f123eda7..ab503a33a269 100644 --- a/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml +++ b/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml @@ -40,12 +40,11 @@ properties: patternProperties: "^nand@[a-f0-9]$": - $ref: nand-chip.yaml# + $ref: raw-nand-chip.yaml# unevaluatedProperties: false properties: reg: maximum: 1 - nand-on-flash-bbt: true nand-ecc-mode: const: hw diff --git a/Documentation/devicetree/bindings/mtd/mtd.yaml b/Documentation/devicetree/bindings/mtd/mtd.yaml index da3d488c335f..b82ca03e969c 100644 --- a/Documentation/devicetree/bindings/mtd/mtd.yaml +++ b/Documentation/devicetree/bindings/mtd/mtd.yaml @@ -12,7 +12,7 @@ maintainers: properties: $nodename: - pattern: "^(flash|.*sram)(@.*)?$" + pattern: "^(flash|.*sram|nand)(@.*)?$" label: description: diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml index f70a32d2d9d4..83a4fe4cc29d 100644 --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml @@ -16,16 +16,6 @@ description: | children nodes of the NAND controller. This representation should be enforced even for simple controllers supporting only one chip. - The ECC strength and ECC step size properties define the user - desires in terms of correction capability of a controller. Together, - they request the ECC engine to correct {strength} bit errors per - {size} bytes. - - The interpretation of these parameters is implementation-defined, so - not all implementations must support all possible - combinations. However, implementations are encouraged to further - specify the value(s) they support. - properties: $nodename: pattern: "^nand-controller(@.*)?" @@ -51,79 +41,8 @@ properties: patternProperties: "^nand@[a-f0-9]$": - $ref: nand-chip.yaml# - - properties: - reg: - description: - Contains the chip-select IDs. - - nand-ecc-placement: - description: - Location of the ECC bytes. This location is unknown by default - but can be explicitly set to "oob", if all ECC bytes are - known to be stored in the OOB area, or "interleaved" if ECC - bytes will be interleaved with regular data in the main area. - $ref: /schemas/types.yaml#/definitions/string - enum: [ oob, interleaved ] - - nand-bus-width: - description: - Bus width to the NAND chip - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [8, 16] - default: 8 - - nand-on-flash-bbt: - description: - With this property, the OS will search the device for a Bad - Block Table (BBT). If not found, it will create one, reserve - a few blocks at the end of the device to store it and update - it as the device ages. Otherwise, the out-of-band area of a - few pages of all the blocks will be scanned at boot time to - find Bad Block Markers (BBM). These markers will help to - build a volatile BBT in RAM. - $ref: /schemas/types.yaml#/definitions/flag - - nand-ecc-maximize: - description: - Whether or not the ECC strength should be maximized. The - maximum ECC strength is both controller and chip - dependent. The ECC engine has to select the ECC config - providing the best strength and taking the OOB area size - constraint into account. This is particularly useful when - only the in-band area is used by the upper layers, and you - want to make your NAND as reliable as possible. - $ref: /schemas/types.yaml#/definitions/flag - - nand-is-boot-medium: - description: - Whether or not the NAND chip is a boot medium. Drivers might - use this information to select ECC algorithms supported by - the boot ROM or similar restrictions. - $ref: /schemas/types.yaml#/definitions/flag - - nand-rb: - description: - Contains the native Ready/Busy IDs. - $ref: /schemas/types.yaml#/definitions/uint32-array - - rb-gpios: - description: - Contains one or more GPIO descriptor (the numper of descriptor - depends on the number of R/B pins exposed by the flash) for the - Ready/Busy pins. Active state refers to the NAND ready state and - should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted. - - wp-gpios: - description: - Contains one GPIO descriptor for the Write Protect pin. - Active state refers to the NAND Write Protect state and should be - set to GPIOD_ACTIVE_LOW unless the signal is inverted. - maxItems: 1 - - required: - - reg + type: object + $ref: raw-nand-chip.yaml# required: - "#address-cells" diff --git a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml index cdffbb9cedc2..1ebe9e2347ea 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml @@ -55,6 +55,7 @@ properties: linux,rootfs: description: Marks partition that contains root filesystem to mount and boot user space from + type: boolean if: not: diff --git a/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml index 2edc65e0e361..1dda2c80747b 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml @@ -21,6 +21,7 @@ oneOf: - $ref: linksys,ns-partitions.yaml - $ref: qcom,smem-part.yaml - $ref: redboot-fis.yaml + - $ref: tplink,safeloader-partitions.yaml properties: compatible: true diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml index 00c991ffa6c4..4ada60fbf81d 100644 --- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml +++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml @@ -34,7 +34,9 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: + nand-bus-width: const: 8 @@ -45,6 +47,24 @@ patternProperties: enum: - 512 + qcom,boot-partitions: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: offset + - description: size + description: + Boot partition use a different layout where the 4 bytes of spare + data are not protected by ECC. Use this to declare these special + partitions by defining first the offset and then the size. + + It's in the form of <offset1 size1 offset2 size2 offset3 ...> + and should be declared in ascending order. + + Refer to the ipq8064 example on how to use this special binding. + + unevaluatedProperties: false + allOf: - $ref: nand-controller.yaml# @@ -107,22 +127,15 @@ allOf: - qcom,ipq806x-nand then: - properties: - qcom,boot-partitions: - $ref: /schemas/types.yaml#/definitions/uint32-matrix - items: - items: - - description: offset - - description: size - description: - Boot partition use a different layout where the 4 bytes of spare - data are not protected by ECC. Use this to declare these special - partitions by defining first the offset and then the size. - - It's in the form of <offset1 size1 offset2 size2 offset3 ...> - and should be declared in ascending order. - - Refer to the ipq8064 example on how to use this special binding. + patternProperties: + "^nand@[a-f0-9]$": + properties: + qcom,boot-partitions: true + else: + patternProperties: + "^nand@[a-f0-9]$": + properties: + qcom,boot-partitions: false required: - compatible diff --git a/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml b/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml new file mode 100644 index 000000000000..092448d7bfc5 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/raw-nand-chip.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Raw NAND Chip Common Properties + +maintainers: + - Miquel Raynal <miquel.raynal@bootlin.com> + +allOf: + - $ref: nand-chip.yaml# + +description: | + The ECC strength and ECC step size properties define the user + desires in terms of correction capability of a controller. Together, + they request the ECC engine to correct {strength} bit errors per + {size} bytes for a particular raw NAND chip. + + The interpretation of these parameters is implementation-defined, so + not all implementations must support all possible + combinations. However, implementations are encouraged to further + specify the value(s) they support. + +properties: + $nodename: + pattern: "^nand@[a-f0-9]$" + + reg: + description: + Contains the chip-select IDs. + + nand-ecc-placement: + description: + Location of the ECC bytes. This location is unknown by default + but can be explicitly set to "oob", if all ECC bytes are + known to be stored in the OOB area, or "interleaved" if ECC + bytes will be interleaved with regular data in the main area. + $ref: /schemas/types.yaml#/definitions/string + enum: [ oob, interleaved ] + deprecated: true + + nand-ecc-mode: + description: + Legacy ECC configuration mixing the ECC engine choice and + configuration. + $ref: /schemas/types.yaml#/definitions/string + enum: [none, soft, soft_bch, hw, hw_syndrome, on-die] + deprecated: true + + nand-bus-width: + description: + Bus width to the NAND chip + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16] + default: 8 + + nand-on-flash-bbt: + description: + With this property, the OS will search the device for a Bad + Block Table (BBT). If not found, it will create one, reserve + a few blocks at the end of the device to store it and update + it as the device ages. Otherwise, the out-of-band area of a + few pages of all the blocks will be scanned at boot time to + find Bad Block Markers (BBM). These markers will help to + build a volatile BBT in RAM. + $ref: /schemas/types.yaml#/definitions/flag + + nand-ecc-maximize: + description: + Whether or not the ECC strength should be maximized. The + maximum ECC strength is both controller and chip + dependent. The ECC engine has to select the ECC config + providing the best strength and taking the OOB area size + constraint into account. This is particularly useful when + only the in-band area is used by the upper layers, and you + want to make your NAND as reliable as possible. + $ref: /schemas/types.yaml#/definitions/flag + + nand-is-boot-medium: + description: + Whether or not the NAND chip is a boot medium. Drivers might + use this information to select ECC algorithms supported by + the boot ROM or similar restrictions. + $ref: /schemas/types.yaml#/definitions/flag + + nand-rb: + description: + Contains the native Ready/Busy IDs. + $ref: /schemas/types.yaml#/definitions/uint32-array + + rb-gpios: + description: + Contains one or more GPIO descriptor (the numper of descriptor + depends on the number of R/B pins exposed by the flash) for the + Ready/Busy pins. Active state refers to the NAND ready state and + should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted. + + wp-gpios: + description: + Contains one GPIO descriptor for the Write Protect pin. + Active state refers to the NAND Write Protect state and should be + set to GPIOD_ACTIVE_LOW unless the signal is inverted. + maxItems: 1 + +required: + - reg + +# This is a generic file other binding inherit from and extend +additionalProperties: true diff --git a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml index 7eb1d0a38565..ee53715ffdca 100644 --- a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml @@ -57,6 +57,7 @@ properties: patternProperties: "^nand@[0-7]$": type: object + $ref: raw-nand-chip.yaml properties: reg: minimum: 0 @@ -116,6 +117,8 @@ patternProperties: Only used in combination with 'nand-is-boot-medium'. + unevaluatedProperties: false + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml index 986e85ccebc7..e72cb5bacaf0 100644 --- a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml @@ -37,6 +37,7 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: nand-ecc-step-size: const: 512 @@ -44,6 +45,8 @@ patternProperties: nand-ecc-strength: enum: [1, 4, 8] + unevaluatedProperties: false + allOf: - $ref: nand-controller.yaml# diff --git a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml index 4774c92e7fc4..df4fdc02456d 100644 --- a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml +++ b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml @@ -30,6 +30,8 @@ properties: patternProperties: "^flash@[0-1],[0-9a-f]+$": type: object + $ref: mtd-physmap.yaml + unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml index 3bd912ed7c7e..23e92be33ac8 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Allwinner A20 GMAC allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# maintainers: - Chen-Yu Tsai <wens@csie.org> diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index 47bc2057e629..4bfac9186886 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -63,7 +63,7 @@ required: - syscon allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/net/altr,tse.yaml b/Documentation/devicetree/bindings/net/altr,tse.yaml index 9d02af468906..f5d3b70af07a 100644 --- a/Documentation/devicetree/bindings/net/altr,tse.yaml +++ b/Documentation/devicetree/bindings/net/altr,tse.yaml @@ -72,8 +72,8 @@ allOf: compatible: contains: enum: - - const: altr,tse-1.0 - - const: ALTR,tse-1.0 + - altr,tse-1.0 + - ALTR,tse-1.0 then: properties: reg: diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml index a2c51a84efa5..ee7a65b528cd 100644 --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml @@ -27,7 +27,7 @@ select: - compatible allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml index 57e4c87cb00b..f01a3988538c 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml @@ -24,11 +24,12 @@ properties: - nxp,88w8997-bt fw-init-baudrate: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 115200 description: Chip baudrate after FW is downloaded and initialized. This property depends on the module vendor's - configuration. If this property is not specified, - 115200 is set as default. + configuration. required: - compatible diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml index 68f78b90d23a..56cbb42b5aea 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml @@ -16,6 +16,7 @@ description: properties: compatible: enum: + - qcom,qca2066-bt - qcom,qca6174-bt - qcom,qca9377-bt - qcom,wcn3990-bt @@ -50,6 +51,9 @@ properties: vddch0-supply: description: VDD_CH0 supply regulator handle + vddch1-supply: + description: VDD_CH1 supply regulator handle + vddaon-supply: description: VDD_AON supply regulator handle @@ -95,6 +99,7 @@ allOf: compatible: contains: enum: + - qcom,qca2066-bt - qcom,qca6174-bt then: required: diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml index 0e5e5db32faf..7c90a4390531 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml +++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml @@ -55,7 +55,7 @@ properties: patternProperties: "^mdio@[0-9a-f]+$": type: object - $ref: "brcm,unimac-mdio.yaml" + $ref: brcm,unimac-mdio.yaml description: GENET internal UniMAC MDIO bus diff --git a/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml index 769fa5c27b76..de1d4298893b 100644 --- a/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml +++ b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml @@ -21,11 +21,22 @@ properties: st,can-primary: description: - Primary and secondary mode of the bxCAN peripheral is only relevant - if the chip has two CAN peripherals. In that case they share some - of the required logic. + Primary mode of the bxCAN peripheral is only relevant if the chip has + two CAN peripherals in dual CAN configuration. In that case they share + some of the required logic. + Not to be used if the peripheral is in single CAN configuration. To avoid misunderstandings, it should be noted that ST documentation - uses the terms master/slave instead of primary/secondary. + uses the terms master instead of primary. + type: boolean + + st,can-secondary: + description: + Secondary mode of the bxCAN peripheral is only relevant if the chip + has two CAN peripherals in dual CAN configuration. In that case they + share some of the required logic. + Not to be used if the peripheral is in single CAN configuration. + To avoid misunderstandings, it should be noted that ST documentation + uses the terms slave instead of secondary. type: boolean reg: diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml index bef5e0f895be..bf8894a0257e 100644 --- a/Documentation/devicetree/bindings/net/cdns,macb.yaml +++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml @@ -109,6 +109,16 @@ properties: power-domains: maxItems: 1 + cdns,rx-watermark: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the receive partial store and forward mode is activated, + the receiver will only begin to forward the packet to the external + AHB or AXI slave when enough packet data is stored in the SRAM packet buffer. + rx-watermark corresponds to the number of SRAM buffer locations, + that need to be filled, before the forwarding process is activated. + Width of the SRAM is platform dependent, and can be 4, 8 or 16 bytes. + '#address-cells': const: 1 @@ -166,6 +176,7 @@ examples: compatible = "cdns,macb"; reg = <0xfffc4000 0x4000>; interrupts = <21>; + cdns,rx-watermark = <0x44>; phy-mode = "rmii"; local-mac-address = [3a 0e 03 04 05 06]; clock-names = "pclk", "hclk", "tx_clk"; diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt index 2363b412410c..33726134f5c9 100644 --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt +++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt @@ -20,7 +20,7 @@ which is at a different MDIO base address in different switch families. 6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321, 6341, 6350, 6351, 6352 - "marvell,mv88e6190" : Switch has base address 0x00. Use with models: - 6190, 6190X, 6191, 6290, 6390, 6390X + 6163, 6190, 6190X, 6191, 6290, 6390, 6390X - "marvell,mv88e6250" : Switch has base address 0x08 or 0x18. Use with model: 6220, 6250 diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml index 9a64ed658745..4d5f5cc6d031 100644 --- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml +++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml @@ -12,10 +12,6 @@ description: cs_sck_delay of 500ns. Ensuring that this SPI timing requirement is observed depends on the SPI bus master driver. -allOf: - - $ref: dsa.yaml#/$defs/ethernet-ports - - $ref: /schemas/spi/spi-peripheral-props.yaml# - maintainers: - Vladimir Oltean <vladimir.oltean@nxp.com> @@ -36,6 +32,9 @@ properties: reg: maxItems: 1 + spi-cpha: true + spi-cpol: true + # Optional container node for the 2 internal MDIO buses of the SJA1110 # (one for the internal 100base-T1 PHYs and the other for the single # 100base-TX PHY). The "reg" property does not have physical significance. @@ -109,6 +108,30 @@ $defs: 1860, 1880, 1900, 1920, 1940, 1960, 1980, 2000, 2020, 2040, 2060, 2080, 2100, 2120, 2140, 2160, 2180, 2200, 2220, 2240, 2260] +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + enum: + - nxp,sja1105e + - nxp,sja1105p + - nxp,sja1105q + - nxp,sja1105r + - nxp,sja1105s + - nxp,sja1105t + then: + properties: + spi-cpol: false + required: + - spi-cpha + else: + properties: + spi-cpha: false + required: + - spi-cpol + unevaluatedProperties: false examples: @@ -120,6 +143,7 @@ examples: ethernet-switch@1 { reg = <0x1>; compatible = "nxp,sja1105t"; + spi-cpha; ethernet-ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index 4f574532ee13..c1241c8a3b77 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -93,6 +93,12 @@ properties: the turn around line low at end of the control phase of the MDIO transaction. + clocks: + maxItems: 1 + description: + External clock connected to the PHY. If not specified it is assumed + that the PHY uses a fixed crystal or an internal oscillator. + enet-phy-lane-swap: $ref: /schemas/types.yaml#/definitions/flag description: diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml index d23fa3771210..42a0bc94312c 100644 --- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml @@ -19,7 +19,7 @@ select: - compatible allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml index d71fa9de2b64..8a3713abd1ca 100644 --- a/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml +++ b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml @@ -17,11 +17,12 @@ properties: maxlinear,use-broken-interrupts: description: | Interrupts are broken on some GPY2xx PHYs in that they keep the - interrupt line asserted even after the interrupt status register is - cleared. Thus it is blocking the interrupt line which is usually bad - for shared lines. By default interrupts are disabled for this PHY and - polling mode is used. If one can live with the consequences, this - property can be used to enable interrupt handling. + interrupt line asserted for a random amount of time even after the + interrupt status register is cleared. Thus it is blocking the + interrupt line which is usually bad for shared lines. By default, + interrupts are disabled for this PHY and polling mode is used. If one + can live with the consequences, this property can be used to enable + interrupt handling. Affected PHYs (as far as known) are GPY215B and GPY215C. type: boolean diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml index 0fa2132fa4f4..08d74ca0769c 100644 --- a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml @@ -25,7 +25,7 @@ select: - compatible allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/micrel,ks8851.yaml b/Documentation/devicetree/bindings/net/micrel,ks8851.yaml index b44d83554ef5..b726c6e14633 100644 --- a/Documentation/devicetree/bindings/net/micrel,ks8851.yaml +++ b/Documentation/devicetree/bindings/net/micrel,ks8851.yaml @@ -44,13 +44,13 @@ required: allOf: - $ref: ethernet-controller.yaml# - - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml# - if: properties: compatible: contains: const: micrel,ks8851 then: + $ref: /schemas/spi/spi-peripheral-props.yaml# properties: reg: maxItems: 1 @@ -60,6 +60,7 @@ allOf: contains: const: micrel,ks8851-mll then: + $ref: /schemas/memory-controllers/mc-peripheral-props.yaml# properties: reg: minItems: 2 diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml index 63409cbff5ad..4c01cae7c93a 100644 --- a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml +++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml @@ -24,7 +24,7 @@ select: - compatible allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml index b110abb42597..2d382faca0e6 100644 --- a/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml +++ b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml @@ -16,7 +16,7 @@ maintainers: properties: $nodename: - pattern: "^ethernet-pse(@.*)?$" + pattern: "^ethernet-pse(@.*|-([0-9]|[1-9][0-9]+))?$" "#pse-cells": description: diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml index 60a38044fb19..7bdb412a0185 100644 --- a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml @@ -20,6 +20,7 @@ properties: compatible: enum: - qcom,qcs404-ethqos + - qcom,sa8775p-ethqos - qcom,sc8280xp-ethqos - qcom,sm8150-ethqos @@ -32,11 +33,13 @@ properties: - const: rgmii interrupts: + minItems: 1 items: - description: Combined signal for various interrupt events - description: The interrupt that occurs when Rx exits the LPI state interrupt-names: + minItems: 1 items: - const: macirq - const: eth_lpi @@ -49,11 +52,18 @@ properties: - const: stmmaceth - const: pclk - const: ptp_ref - - const: rgmii + - enum: + - rgmii + - phyaux iommus: maxItems: 1 + phys: true + + phy-names: + const: serdes + required: - compatible - clocks diff --git a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml index 8cc2b9924680..043e118c605c 100644 --- a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml @@ -11,7 +11,7 @@ maintainers: - Alistair Francis <alistair@alistair23.me> description: - RTL8723CS/RTL8723CS/RTL8821CS/RTL8822CS is a WiFi + BT chip. WiFi part + RTL8723BS/RTL8723CS/RTL8821CS/RTL8822CS is a WiFi + BT chip. WiFi part is connected over SDIO, while BT is connected over serial. It speaks H5 protocol with few extra commands to upload firmware and change module speed. @@ -27,7 +27,7 @@ properties: - items: - enum: - realtek,rtl8821cs-bt - - const: realtek,rtl8822cs-bt + - const: realtek,rtl8723bs-bt device-wake-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml index 2a21bbe02892..176ea5f90251 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml @@ -32,7 +32,7 @@ select: - compatible allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 363b3e3ea3a6..ddf9522a5dc2 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -67,6 +67,7 @@ properties: - loongson,ls2k-dwmac - loongson,ls7a-dwmac - qcom,qcs404-ethqos + - qcom,sa8775p-ethqos - qcom,sc8280xp-ethqos - qcom,sm8150-ethqos - renesas,r9a06g032-gmac @@ -582,6 +583,7 @@ allOf: - ingenic,x1600-mac - ingenic,x1830-mac - ingenic,x2000-mac + - qcom,sa8775p-ethqos - qcom,sc8280xp-ethqos - snps,dwmac-3.50a - snps,dwmac-4.10a @@ -638,6 +640,7 @@ allOf: - ingenic,x1830-mac - ingenic,x2000-mac - qcom,qcs404-ethqos + - qcom,sa8775p-ethqos - qcom,sc8280xp-ethqos - qcom,sm8150-ethqos - snps,dwmac-4.00 diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index 395a4650e285..c9c25132d154 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -168,14 +168,14 @@ properties: patternProperties: "^mdio@[0-9a-f]+$": type: object - $ref: "ti,davinci-mdio.yaml#" + $ref: ti,davinci-mdio.yaml# description: CPSW MDIO bus. "^cpts@[0-9a-f]+": type: object - $ref: "ti,k3-am654-cpts.yaml#" + $ref: ti,k3-am654-cpts.yaml# description: CPSW Common Platform Time Sync (CPTS) module. diff --git a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml index 474fa8bcf302..052f636158b3 100644 --- a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml @@ -19,7 +19,7 @@ select: - compatible allOf: - - $ref: "snps,dwmac.yaml#" + - $ref: snps,dwmac.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml index fec1cc9b9a08..4aa521f1be8c 100644 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml @@ -15,6 +15,9 @@ description: These chips also have a Bluetooth portion described in a separate binding. +allOf: + - $ref: ieee80211.yaml# + properties: compatible: oneOf: @@ -38,6 +41,7 @@ properties: - brcm,bcm4354-fmac - brcm,bcm4356-fmac - brcm,bcm4359-fmac + - brcm,bcm4366-fmac - cypress,cyw4373-fmac - cypress,cyw43012-fmac - const: brcm,bcm4329-fmac @@ -120,7 +124,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml index c85ed330426d..7758a55dd328 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml @@ -84,6 +84,8 @@ properties: required: - iommus + ieee80211-freq-limit: true + qcom,ath10k-calibration-data: $ref: /schemas/types.yaml#/definitions/uint8-array description: @@ -164,6 +166,7 @@ required: additionalProperties: false allOf: + - $ref: ieee80211.yaml# - if: properties: compatible: @@ -355,4 +358,5 @@ examples: "msi14", "msi15", "legacy"; + ieee80211-freq-limit = <5470000 5875000>; }; diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt deleted file mode 100644 index 80e505a2fda1..000000000000 --- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt +++ /dev/null @@ -1,101 +0,0 @@ -XILINX AXI ETHERNET Device Tree Bindings --------------------------------------------------------- - -Also called AXI 1G/2.5G Ethernet Subsystem, the xilinx axi ethernet IP core -provides connectivity to an external ethernet PHY supporting different -interfaces: MII, GMII, RGMII, SGMII, 1000BaseX. It also includes two -segments of memory for buffering TX and RX, as well as the capability of -offloading TX/RX checksum calculation off the processor. - -Management configuration is done through the AXI interface, while payload is -sent and received through means of an AXI DMA controller. This driver -includes the DMA driver code, so this driver is incompatible with AXI DMA -driver. - -For more details about mdio please refer phy.txt file in the same directory. - -Required properties: -- compatible : Must be one of "xlnx,axi-ethernet-1.00.a", - "xlnx,axi-ethernet-1.01.a", "xlnx,axi-ethernet-2.01.a" -- reg : Address and length of the IO space, as well as the address - and length of the AXI DMA controller IO space, unless - axistream-connected is specified, in which case the reg - attribute of the node referenced by it is used. -- interrupts : Should be a list of 2 or 3 interrupts: TX DMA, RX DMA, - and optionally Ethernet core. If axistream-connected is - specified, the TX/RX DMA interrupts should be on that node - instead, and only the Ethernet core interrupt is optionally - specified here. -- phy-handle : Should point to the external phy device if exists. Pointing - this to the PCS/PMA PHY is deprecated and should be avoided. - See ethernet.txt file in the same directory. -- xlnx,rxmem : Set to allocated memory buffer for Rx/Tx in the hardware - -Optional properties: -- phy-mode : See ethernet.txt -- xlnx,phy-type : Deprecated, do not use, but still accepted in preference - to phy-mode. -- xlnx,txcsum : 0 or empty for disabling TX checksum offload, - 1 to enable partial TX checksum offload, - 2 to enable full TX checksum offload -- xlnx,rxcsum : Same values as xlnx,txcsum but for RX checksum offload -- xlnx,switch-x-sgmii : Boolean to indicate the Ethernet core is configured to - support both 1000BaseX and SGMII modes. If set, the phy-mode - should be set to match the mode selected on core reset (i.e. - by the basex_or_sgmii core input line). -- clock-names: Tuple listing input clock names. Possible clocks: - s_axi_lite_clk: Clock for AXI register slave interface - axis_clk: AXI4-Stream clock for TXD RXD TXC and RXS interfaces - ref_clk: Ethernet reference clock, used by signal delay - primitives and transceivers - mgt_clk: MGT reference clock (used by optional internal - PCS/PMA PHY) - - Note that if s_axi_lite_clk is not specified by name, the - first clock of any name is used for this. If that is also not - specified, the clock rate is auto-detected from the CPU clock - (but only on platforms where this is possible). New device - trees should specify all applicable clocks by name - the - fallbacks to an unnamed clock or to CPU clock are only for - backward compatibility. -- clocks: Phandles to input clocks matching clock-names. Refer to common - clock bindings. -- axistream-connected: Reference to another node which contains the resources - for the AXI DMA controller used by this device. - If this is specified, the DMA-related resources from that - device (DMA registers and DMA TX/RX interrupts) rather - than this one will be used. - - mdio : Child node for MDIO bus. Must be defined if PHY access is - required through the core's MDIO interface (i.e. always, - unless the PHY is accessed through a different bus). - Non-standard MDIO bus frequency is supported via - "clock-frequency", see mdio.yaml. - - - pcs-handle: Phandle to the internal PCS/PMA PHY in SGMII or 1000Base-X - modes, where "pcs-handle" should be used to point - to the PCS/PMA PHY, and "phy-handle" should point to an - external PHY if exists. - -Example: - axi_ethernet_eth: ethernet@40c00000 { - compatible = "xlnx,axi-ethernet-1.00.a"; - device_type = "network"; - interrupt-parent = <µblaze_0_axi_intc>; - interrupts = <2 0 1>; - clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk"; - clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>; - phy-mode = "mii"; - reg = <0x40c00000 0x40000 0x50c00000 0x40000>; - xlnx,rxcsum = <0x2>; - xlnx,rxmem = <0x800>; - xlnx,txcsum = <0x2>; - phy-handle = <&phy0>; - axi_ethernetlite_0_mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - phy0: phy@0 { - device_type = "ethernet-phy"; - reg = <1>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml new file mode 100644 index 000000000000..1d33d80af11c --- /dev/null +++ b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml @@ -0,0 +1,183 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/xlnx,axi-ethernet.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AXI 1G/2.5G Ethernet Subsystem + +description: | + Also called AXI 1G/2.5G Ethernet Subsystem, the xilinx axi ethernet IP core + provides connectivity to an external ethernet PHY supporting different + interfaces: MII, GMII, RGMII, SGMII, 1000BaseX. It also includes two + segments of memory for buffering TX and RX, as well as the capability of + offloading TX/RX checksum calculation off the processor. + + Management configuration is done through the AXI interface, while payload is + sent and received through means of an AXI DMA controller. This driver + includes the DMA driver code, so this driver is incompatible with AXI DMA + driver. + +maintainers: + - Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> + +properties: + compatible: + enum: + - xlnx,axi-ethernet-1.00.a + - xlnx,axi-ethernet-1.01.a + - xlnx,axi-ethernet-2.01.a + + reg: + description: + Address and length of the IO space, as well as the address + and length of the AXI DMA controller IO space, unless + axistream-connected is specified, in which case the reg + attribute of the node referenced by it is used. + maxItems: 2 + + interrupts: + items: + - description: Ethernet core interrupt + - description: Tx DMA interrupt + - description: Rx DMA interrupt + description: + Ethernet core interrupt is optional. If axistream-connected property is + present DMA node should contains TX/RX DMA interrupts else DMA interrupt + resources are mentioned on ethernet node. + minItems: 1 + + phy-handle: true + + xlnx,rxmem: + description: + Set to allocated memory buffer for Rx/Tx in the hardware. + $ref: /schemas/types.yaml#/definitions/uint32 + + phy-mode: + enum: + - mii + - gmii + - rgmii + - sgmii + - 1000BaseX + + xlnx,phy-type: + description: + Do not use, but still accepted in preference to phy-mode. + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + + xlnx,txcsum: + description: + TX checksum offload. 0 or empty for disabling TX checksum offload, + 1 to enable partial TX checksum offload and 2 to enable full TX + checksum offload. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + + xlnx,rxcsum: + description: + RX checksum offload. 0 or empty for disabling RX checksum offload, + 1 to enable partial RX checksum offload and 2 to enable full RX + checksum offload. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + + xlnx,switch-x-sgmii: + type: boolean + description: + Indicate the Ethernet core is configured to support both 1000BaseX and + SGMII modes. If set, the phy-mode should be set to match the mode + selected on core reset (i.e. by the basex_or_sgmii core input line). + + clocks: + items: + - description: Clock for AXI register slave interface. + - description: AXI4-Stream clock for TXD RXD TXC and RXS interfaces. + - description: Ethernet reference clock, used by signal delay primitives + and transceivers. + - description: MGT reference clock (used by optional internal PCS/PMA PHY) + + clock-names: + items: + - const: s_axi_lite_clk + - const: axis_clk + - const: ref_clk + - const: mgt_clk + + axistream-connected: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle of AXI DMA controller which contains the resources + used by this device. If this is specified, the DMA-related resources + from that device (DMA registers and DMA TX/RX interrupts) rather than + this one will be used. + + mdio: + type: object + + pcs-handle: + description: Phandle to the internal PCS/PMA PHY in SGMII or 1000Base-X + modes, where "pcs-handle" should be used to point to the PCS/PMA PHY, + and "phy-handle" should point to an external PHY if exists. + maxItems: 1 + +required: + - compatible + - interrupts + - reg + - xlnx,rxmem + - phy-handle + +allOf: + - $ref: /schemas/net/ethernet-controller.yaml# + +additionalProperties: false + +examples: + - | + axi_ethernet_eth: ethernet@40c00000 { + compatible = "xlnx,axi-ethernet-1.00.a"; + interrupts = <2 0 1>; + clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk"; + clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>; + phy-mode = "mii"; + reg = <0x40c00000 0x40000>,<0x50c00000 0x40000>; + xlnx,rxcsum = <0x2>; + xlnx,rxmem = <0x800>; + xlnx,txcsum = <0x2>; + phy-handle = <&phy0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@1 { + device_type = "ethernet-phy"; + reg = <1>; + }; + }; + }; + + - | + axi_ethernet_eth1: ethernet@40000000 { + compatible = "xlnx,axi-ethernet-1.00.a"; + interrupts = <0>; + clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk"; + clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>; + phy-mode = "mii"; + reg = <0x00 0x40000000 0x00 0x40000>; + xlnx,rxcsum = <0x2>; + xlnx,rxmem = <0x800>; + xlnx,txcsum = <0x2>; + phy-handle = <&phy1>; + axistream-connected = <&dma>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy1: ethernet-phy@1 { + device_type = "ethernet-phy"; + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml index 36def7128fca..13412af7f046 100644 --- a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml +++ b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml @@ -36,14 +36,29 @@ properties: et0macaddr: type: object description: First Ethernet interface's MAC address + properties: + "#nvmem-cell-cells": + description: The first argument is a MAC address offset. + const: 1 + additionalProperties: false et1macaddr: type: object description: Second Ethernet interface's MAC address + properties: + "#nvmem-cell-cells": + description: The first argument is a MAC address offset. + const: 1 + additionalProperties: false et2macaddr: type: object description: Third Ethernet interface's MAC address + properties: + "#nvmem-cell-cells": + description: The first argument is a MAC address offset. + const: 1 + additionalProperties: false unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml index 9876243ff1e8..99e60d713dac 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/nvmem/imx-ocotp.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Freescale i.MX6 On-Chip OTP Controller (OCOTP) +title: Freescale i.MX On-Chip OTP Controller (OCOTP) maintainers: - Anson Huang <Anson.Huang@nxp.com> @@ -12,7 +12,7 @@ maintainers: description: | This binding represents the on-chip eFuse OTP controller found on i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL, - i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN and i.MX8MP SoCs. + i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN i.MX8MP and i.MX93 SoCs. allOf: - $ref: nvmem.yaml# @@ -32,6 +32,7 @@ properties: - fsl,imx7ulp-ocotp - fsl,imx8mq-ocotp - fsl,imx8mm-ocotp + - fsl,imx93-ocotp - const: syscon - items: - enum: @@ -46,12 +47,6 @@ properties: reg: maxItems: 1 - "#address-cells": - const: 1 - - "#size-cells": - const: 1 - clocks: maxItems: 1 @@ -61,21 +56,6 @@ required: - compatible - reg -patternProperties: - "^.*@[0-9a-f]+$": - type: object - - properties: - reg: - maxItems: 1 - description: - Offset and size in bytes within the storage device. - - required: - - reg - - additionalProperties: false - unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml b/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml new file mode 100644 index 000000000000..e698098450e1 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/layouts/fixed-cell.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Fixed offset & size NVMEM cell + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +properties: + reg: + maxItems: 1 + + bits: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - minimum: 0 + maximum: 7 + description: + Offset in bit within the address range specified by reg. + - minimum: 1 + description: + Size in bit within the address range specified by reg. + +required: + - reg + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml new file mode 100644 index 000000000000..c271537d0714 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/layouts/fixed-layout.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVMEM layout for fixed NVMEM cells + +description: + Many NVMEM devices have hardcoded cells layout (offset and size of defined + NVMEM content doesn't change). + + This binding allows defining such NVMEM layout with its cells. It can be used + on top of any NVMEM device. + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +properties: + compatible: + const: fixed-layout + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + +patternProperties: + "@[a-f0-9]+$": + type: object + $ref: fixed-cell.yaml + unevaluatedProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + - | + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + calibration@4000 { + reg = <0x4000 0x100>; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml index 8512ee538c4c..3b40f7880774 100644 --- a/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml +++ b/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml @@ -18,16 +18,13 @@ description: | perform their parsing. The nvmem-layout container is here to describe these. oneOf: + - $ref: fixed-layout.yaml - $ref: kontron,sl28-vpd.yaml - $ref: onie,tlv-layout.yaml properties: compatible: true - '#address-cells': false - - '#size-cells': false - required: - compatible diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml index d16d42fb98b6..7ec2988b597e 100644 --- a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml @@ -27,6 +27,7 @@ properties: - enum: - mediatek,mt7622-efuse - mediatek,mt7623-efuse + - mediatek,mt7986-efuse - mediatek,mt8173-efuse - mediatek,mt8183-efuse - mediatek,mt8186-efuse diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml index 8938eec22b52..a9b822aeaa7e 100644 --- a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml @@ -18,12 +18,6 @@ properties: - fsl,imx23-ocotp - fsl,imx28-ocotp - "#address-cells": - const: 1 - - "#size-cells": - const: 1 - reg: maxItems: 1 @@ -35,7 +29,7 @@ required: - reg - clocks -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml index 75bb93dda9df..980244100690 100644 --- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml +++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml @@ -49,23 +49,8 @@ properties: patternProperties: "@[0-9a-f]+(,[0-7])?$": type: object - - properties: - reg: - maxItems: 1 - description: - Offset and size in bytes within the storage device. - - bits: - $ref: /schemas/types.yaml#/definitions/uint32-array - items: - - minimum: 0 - maximum: 7 - description: - Offset in bit within the address range specified by reg. - - minimum: 1 - description: - Size in bit within the address range specified by reg. + $ref: layouts/fixed-cell.yaml + deprecated: true additionalProperties: true @@ -83,24 +68,30 @@ examples: /* ... */ - /* Data cells */ - tsens_calibration: calib@404 { - reg = <0x404 0x10>; - }; - - tsens_calibration_bckp: calib_bckp@504 { - reg = <0x504 0x11>; - bits = <6 128>; - }; - - pvs_version: pvs-version@6 { - reg = <0x6 0x2>; - bits = <7 2>; - }; - - speed_bin: speed-bin@c{ - reg = <0xc 0x1>; - bits = <2 3>; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + /* Data cells */ + tsens_calibration: calib@404 { + reg = <0x404 0x10>; + }; + + tsens_calibration_bckp: calib_bckp@504 { + reg = <0x504 0x11>; + bits = <6 128>; + }; + + pvs_version: pvs-version@6 { + reg = <0x6 0x2>; + bits = <7 2>; + }; + + speed_bin: speed-bin@c{ + reg = <0xc 0x1>; + bits = <2 3>; + }; }; }; diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml index 8d8503dd934b..6cd4682a167d 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml @@ -18,8 +18,11 @@ properties: - enum: - qcom,apq8064-qfprom - qcom,apq8084-qfprom + - qcom,ipq5332-qfprom + - qcom,ipq6018-qfprom - qcom,ipq8064-qfprom - qcom,ipq8074-qfprom + - qcom,ipq9574-qfprom - qcom,msm8916-qfprom - qcom,msm8974-qfprom - qcom,msm8976-qfprom @@ -64,12 +67,6 @@ properties: power-domains: maxItems: 1 - # Needed if any child nodes are present. - "#address-cells": - const: 1 - "#size-cells": - const: 1 - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml index dce0c7d84ce7..cd980def97b8 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml @@ -25,12 +25,6 @@ properties: reg: maxItems: 1 - "#address-cells": - const: 1 - - "#size-cells": - const: 1 - ranges: true required: diff --git a/Documentation/devicetree/bindings/nvmem/rmem.yaml b/Documentation/devicetree/bindings/nvmem/rmem.yaml index 38a39c9b8c1c..1ec0d09bcafa 100644 --- a/Documentation/devicetree/bindings/nvmem/rmem.yaml +++ b/Documentation/devicetree/bindings/nvmem/rmem.yaml @@ -17,6 +17,7 @@ properties: items: - enum: - raspberrypi,bootloader-config + - raspberrypi,bootloader-public-key - const: nvmem-rmem reg: diff --git a/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml b/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml new file mode 100644 index 000000000000..9c6eff788928 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/rockchip,otp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip internal OTP (One Time Programmable) memory + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,px30-otp + - rockchip,rk3308-otp + - rockchip,rk3588-otp + + reg: + maxItems: 1 + + clocks: + minItems: 3 + maxItems: 4 + + clock-names: + minItems: 3 + items: + - const: otp + - const: apb_pclk + - const: phy + - const: arb + + resets: + minItems: 1 + maxItems: 3 + + reset-names: + minItems: 1 + maxItems: 3 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + +allOf: + - $ref: nvmem.yaml# + + - if: + properties: + compatible: + contains: + enum: + - rockchip,px30-otp + - rockchip,rk3308-otp + then: + properties: + clocks: + maxItems: 3 + resets: + maxItems: 1 + reset-names: + items: + - const: phy + + - if: + properties: + compatible: + contains: + enum: + - rockchip,rk3588-otp + then: + properties: + clocks: + minItems: 4 + resets: + minItems: 3 + reset-names: + items: + - const: otp + - const: apb + - const: arb + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/px30-cru.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + otp: efuse@ff290000 { + compatible = "rockchip,px30-otp"; + reg = <0x0 0xff290000 0x0 0x4000>; + clocks = <&cru SCLK_OTP_USR>, <&cru PCLK_OTP_NS>, + <&cru PCLK_OTP_PHY>; + clock-names = "otp", "apb_pclk", "phy"; + resets = <&cru SRST_OTP_PHY>; + reset-names = "phy"; + #address-cells = <1>; + #size-cells = <1>; + + cpu_id: id@7 { + reg = <0x07 0x10>; + }; + + cpu_leakage: cpu-leakage@17 { + reg = <0x17 0x1>; + }; + + performance: performance@1e { + reg = <0x1e 0x1>; + bits = <4 3>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-otp.txt b/Documentation/devicetree/bindings/nvmem/rockchip-otp.txt deleted file mode 100644 index 40f649f7c2e5..000000000000 --- a/Documentation/devicetree/bindings/nvmem/rockchip-otp.txt +++ /dev/null @@ -1,25 +0,0 @@ -Rockchip internal OTP (One Time Programmable) memory device tree bindings - -Required properties: -- compatible: Should be one of the following. - - "rockchip,px30-otp" - for PX30 SoCs. - - "rockchip,rk3308-otp" - for RK3308 SoCs. -- reg: Should contain the registers location and size -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Should be "otp", "apb_pclk" and "phy". -- resets: Must contain an entry for each entry in reset-names. - See ../../reset/reset.txt for details. -- reset-names: Should be "phy". - -See nvmem.txt for more information. - -Example: - otp: otp@ff290000 { - compatible = "rockchip,px30-otp"; - reg = <0x0 0xff290000 0x0 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&cru SCLK_OTP_USR>, <&cru PCLK_OTP_NS>, - <&cru PCLK_OTP_PHY>; - clock-names = "otp", "apb_pclk", "phy"; - }; diff --git a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml index b8bca0599c45..efccc5aacbe0 100644 --- a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml @@ -14,9 +14,6 @@ allOf: - $ref: nvmem.yaml# properties: - "#address-cells": true - "#size-cells": true - compatible: const: socionext,uniphier-efuse diff --git a/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml index 8877c2283e9e..da3f1de7d281 100644 --- a/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml @@ -28,12 +28,6 @@ properties: clocks: maxItems: 1 - "#address-cells": - const: 1 - - "#size-cells": - const: 1 - thermal-calibration: type: object description: thermal calibration values diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml index 9bff8ecb653c..d91b639ae7ae 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml @@ -17,20 +17,11 @@ description: properties: clocks: minItems: 3 - items: - - description: PCIe bridge clock. - - description: PCIe bus clock. - - description: PCIe PHY clock. - - description: Additional required clock entry for imx6sx-pcie, - imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep. + maxItems: 4 clock-names: minItems: 3 - items: - - const: pcie - - const: pcie_bus - - enum: [ pcie_phy, pcie_aux ] - - enum: [ pcie_inbound_axi, pcie_aux ] + maxItems: 4 num-lanes: const: 1 diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml index f4a328ec1daa..ee155ed5f181 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml @@ -31,6 +31,19 @@ properties: - const: dbi - const: addr_space + clocks: + minItems: 3 + items: + - description: PCIe bridge clock. + - description: PCIe bus clock. + - description: PCIe PHY clock. + - description: Additional required clock entry for imx6sx-pcie, + imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep. + + clock-names: + minItems: 3 + maxItems: 4 + interrupts: items: - description: builtin eDMA interrupter. @@ -49,6 +62,31 @@ required: allOf: - $ref: /schemas/pci/snps,dw-pcie-ep.yaml# - $ref: /schemas/pci/fsl,imx6q-pcie-common.yaml# + - if: + properties: + compatible: + enum: + - fsl,imx8mq-pcie-ep + then: + properties: + clocks: + minItems: 4 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_phy + - const: pcie_aux + else: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_aux + unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml index 2443641754d3..81bbb8728f0f 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml @@ -40,6 +40,19 @@ properties: - const: dbi - const: config + clocks: + minItems: 3 + items: + - description: PCIe bridge clock. + - description: PCIe bus clock. + - description: PCIe PHY clock. + - description: Additional required clock entry for imx6sx-pcie, + imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep. + + clock-names: + minItems: 3 + maxItems: 4 + interrupts: items: - description: builtin MSI controller. @@ -77,6 +90,70 @@ required: allOf: - $ref: /schemas/pci/snps,dw-pcie.yaml# - $ref: /schemas/pci/fsl,imx6q-pcie-common.yaml# + - if: + properties: + compatible: + enum: + - fsl,imx6sx-pcie + then: + properties: + clocks: + minItems: 4 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_phy + - const: pcie_inbound_axi + + - if: + properties: + compatible: + enum: + - fsl,imx8mq-pcie + then: + properties: + clocks: + minItems: 4 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_phy + - const: pcie_aux + + - if: + properties: + compatible: + enum: + - fsl,imx6q-pcie + - fsl,imx6qp-pcie + - fsl,imx7d-pcie + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_phy + + - if: + properties: + compatible: + enum: + - fsl,imx8mm-pcie + - fsl,imx8mp-pcie + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_aux unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml index b3c22ebd156c..811112255d7d 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml @@ -13,6 +13,7 @@ properties: compatible: enum: - qcom,sdx55-pcie-ep + - qcom,sdx65-pcie-ep - qcom,sm8450-pcie-ep reg: @@ -109,6 +110,7 @@ allOf: contains: enum: - qcom,sdx55-pcie-ep + - qcom,sdx65-pcie-ep then: properties: clocks: diff --git a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml index 88386a6d7011..6b62f6f58efe 100644 --- a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml @@ -47,7 +47,7 @@ examples: pcie-ep@f8000000 { compatible = "rockchip,rk3399-pcie-ep"; - reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0x80000000 0x0 0x20000>; + reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0xfa000000 0x0 0x2000000>; reg-names = "apb-base", "mem-base"; clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; @@ -63,6 +63,8 @@ examples: phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>; phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3"; rockchip,max-outbound-regions = <16>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqnb_cpm>; }; }; ... diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml index 24c88942e59e..a4f61ced5e88 100644 --- a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml @@ -41,20 +41,24 @@ properties: - const: config clocks: + minItems: 5 items: - description: AHB clock for PCIe master - description: AHB clock for PCIe slave - description: AHB clock for PCIe dbi - description: APB clock for PCIe - description: Auxiliary clock for PCIe + - description: PIPE clock clock-names: + minItems: 5 items: - const: aclk_mst - const: aclk_slv - const: aclk_dbi - const: pclk - const: aux + - const: pipe msi-map: true @@ -70,13 +74,19 @@ properties: maxItems: 1 ranges: - maxItems: 2 + minItems: 2 + maxItems: 3 resets: - maxItems: 1 + minItems: 1 + maxItems: 2 reset-names: - const: pipe + oneOf: + - const: pipe + - items: + - const: pwr + - const: pipe vpcie3v3-supply: true diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml index 24ddc2855b94..4734be456bde 100644 --- a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml +++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: CPM Host Controller device tree for Xilinx Versal SoCs maintainers: - - Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> + - Bharat Kumar Gogada <bharat.kumar.gogada@amd.com> allOf: - $ref: /schemas/pci/pci-bus.yaml# diff --git a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml index 80a92385367e..e9fad4b3de68 100644 --- a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml +++ b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/perf/fsl-imx-ddr.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Freescale(NXP) IMX8 DDR performance monitor +title: Freescale(NXP) IMX8/9 DDR performance monitor maintainers: - Frank Li <frank.li@nxp.com> @@ -19,6 +19,7 @@ properties: - fsl,imx8mm-ddr-pmu - fsl,imx8mn-ddr-pmu - fsl,imx8mp-ddr-pmu + - fsl,imx93-ddr-pmu - items: - enum: - fsl,imx8mm-ddr-pmu diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml index 26f2b887cfc1..a9f78344efdb 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml @@ -26,6 +26,10 @@ properties: - const: mediatek,mt2701-mipi-tx - items: - enum: + - mediatek,mt6795-mipi-tx + - const: mediatek,mt8173-mipi-tx + - items: + - enum: - mediatek,mt8365-mipi-tx - const: mediatek,mt8183-mipi-tx - const: mediatek,mt2701-mipi-tx diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml index 9ae514fa7533..d3cd7997879f 100644 --- a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml @@ -31,8 +31,14 @@ properties: - const: pipe resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 items: - - description: exclusive PHY reset line + - const: phy + - const: apb rockchip,enable-ssc: type: boolean @@ -78,6 +84,32 @@ required: - rockchip,pipe-phy-grf - "#phy-cells" +allOf: + - if: + properties: + compatible: + contains: + const: rockchip,rk3568-naneng-combphy + then: + properties: + resets: + maxItems: 1 + reset-names: + maxItems: 1 + - if: + properties: + compatible: + contains: + const: rockchip,rk3588-naneng-combphy + then: + properties: + resets: + minItems: 2 + reset-names: + minItems: 2 + required: + - reset-names + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml index 0ef2c9b9d466..d30734338888 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml @@ -61,6 +61,10 @@ properties: power-domains: maxItems: 1 + orientation-switch: + description: Flag the port as possible handler of orientation switching + type: boolean + resets: items: - description: reset of phy block. @@ -251,6 +255,8 @@ examples: vdda-phy-supply = <&vdda_usb2_ss_1p2>; vdda-pll-supply = <&vdda_usb2_ss_core>; + orientation-switch; + usb3-phy@200 { reg = <0x200 0x128>, <0x400 0x200>, diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt index e2b861ce16d8..774c3c269c40 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt @@ -37,7 +37,8 @@ right representation of the pin. Optional properties: - GENERIC_PINCONFIG: generic pinconfig options to use: - bias-disable, bias-pull-down, bias-pull-up, drive-open-drain, - input-schmitt-enable, input-debounce, output-low, output-high. + drive-push-pull input-schmitt-enable, input-debounce, output-low, + output-high. - for microchip,sama7g5-pinctrl only: - slew-rate: 0 - disabled, 1 - enabled (default) - atmel,drive-strength: 0 or 1 for low drive, 2 for medium drive and 3 for diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml index 7f4f36a58e56..739a08f00467 100644 --- a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml +++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Canaan Kendryte K210 FPIOA maintainers: - - Damien Le Moal <damien.lemoal@wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: The Canaan Kendryte K210 SoC Fully Programmable IO Array (FPIOA) diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml new file mode 100644 index 000000000000..f3deda9f7127 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux-aon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra234 AON Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +$ref: nvidia,tegra234-pinmux-common.yaml + +properties: + compatible: + const: nvidia,tegra234-pinmux-aon + +patternProperties: + "^pinmux(-[a-z0-9-]+)?$": + type: object + + # pin groups + additionalProperties: + properties: + nvidia,pins: + items: + enum: [ can0_dout_paa0, can0_din_paa1, can1_dout_paa2, + can1_din_paa3, can0_stb_paa4, can0_en_paa5, + soc_gpio49_paa6, can0_err_paa7, can1_stb_pbb0, + can1_en_pbb1, soc_gpio50_pbb2, can1_err_pbb3, + spi2_sck_pcc0, spi2_miso_pcc1, spi2_mosi_pcc2, + spi2_cs0_pcc3, touch_clk_pcc4, uart3_tx_pcc5, + uart3_rx_pcc6, gen2_i2c_scl_pcc7, gen2_i2c_sda_pdd0, + gen8_i2c_scl_pdd1, gen8_i2c_sda_pdd2, + sce_error_pee0, vcomp_alert_pee1, + ao_retention_n_pee2, batt_oc_pee3, power_on_pee4, + soc_gpio26_pee5, soc_gpio27_pee6, bootv_ctl_n_pee7, + hdmi_cec_pgg0, + # drive groups + drive_touch_clk_pcc4, drive_uart3_rx_pcc6, + drive_uart3_tx_pcc5, drive_gen8_i2c_sda_pdd2, + drive_gen8_i2c_scl_pdd1, drive_spi2_mosi_pcc2, + drive_gen2_i2c_scl_pcc7, drive_spi2_cs0_pcc3, + drive_gen2_i2c_sda_pdd0, drive_spi2_sck_pcc0, + drive_spi2_miso_pcc1, drive_can1_dout_paa2, + drive_can1_din_paa3, drive_can0_dout_paa0, + drive_can0_din_paa1, drive_can0_stb_paa4, + drive_can0_en_paa5, drive_soc_gpio49_paa6, + drive_can0_err_paa7, drive_can1_stb_pbb0, + drive_can1_en_pbb1, drive_soc_gpio50_pbb2, + drive_can1_err_pbb3, drive_sce_error_pee0, + drive_batt_oc_pee3, drive_bootv_ctl_n_pee7, + drive_power_on_pee4, drive_soc_gpio26_pee5, + drive_soc_gpio27_pee6, drive_ao_retention_n_pee2, + drive_vcomp_alert_pee1, drive_hdmi_cec_pgg0 ] + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/pinctrl-tegra.h> + + pinmux@c300000 { + compatible = "nvidia,tegra234-pinmux-aon"; + reg = <0xc300000 0x4000>; + + pinctrl-names = "cec"; + pinctrl-0 = <&cec_state>; + + cec_state: pinmux-cec { + cec { + nvidia,pins = "hdmi_cec_pgg0"; + nvidia,function = "gp"; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml new file mode 100644 index 000000000000..4f9de78085e5 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra234 Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + reg: + items: + - description: pinmux registers + +patternProperties: + "^pinmux(-[a-z0-9-]+)?$": + type: object + + # pin groups + additionalProperties: + $ref: nvidia,tegra-pinmux-common.yaml + # We would typically use unevaluatedProperties here but that has the + # downside that all the properties in the common bindings become valid + # for all chip generations. In this case, however, we want the per-SoC + # bindings to be able to override which of the common properties are + # allowed, since not all pinmux generations support the same sets of + # properties. This way, the common bindings define the format of the + # properties but the per-SoC bindings define which of them apply to a + # given chip. + additionalProperties: false + properties: + nvidia,function: + enum: [ gp, uartc, i2c8, spi2, i2c2, can1, can0, rsvd0, eth0, eth2, + eth1, dp, eth3, i2c4, i2c7, i2c9, eqos, pe2, pe1, pe0, pe3, + pe4, pe5, pe6, pe7, pe8, pe9, pe10, qspi0, qspi1, qpsi, + sdmmc1, sce, soc, gpio, hdmi, ufs0, spi3, spi1, uartb, uarte, + usb, extperiph2, extperiph1, i2c3, vi0, i2c5, uarta, uartd, + i2c1, i2s4, i2s6, aud, spi5, touch, uartj, rsvd1, wdt, tsc, + dmic3, led, vi0_alt, i2s5, nv, extperiph3, extperiph4, spi4, + ccla, i2s1, i2s2, i2s3, i2s8, rsvd2, dmic5, dca, displayb, + displaya, vi1, dcb, dmic1, dmic4, i2s7, dmic2, dspk0, rsvd3, + tsc_alt, istctrl, vi1_alt, dspk1, igpu ] + + # out of the common properties, only these are allowed for Tegra234 + nvidia,pins: true + nvidia,pull: true + nvidia,tristate: true + nvidia,schmitt: true + nvidia,enable-input: true + nvidia,open-drain: true + nvidia,lock: true + nvidia,drive-type: true + nvidia,io-hv: true + + required: + - nvidia,pins + +required: + - compatible + - reg + +additionalProperties: true +... diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml new file mode 100644 index 000000000000..17b865ecfcda --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra234 Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +$ref: nvidia,tegra234-pinmux-common.yaml + +properties: + compatible: + const: nvidia,tegra234-pinmux + +patternProperties: + "^pinmux(-[a-z0-9-]+)?$": + type: object + + # pin groups + additionalProperties: + properties: + nvidia,pins: + items: + enum: [ dap6_sclk_pa0, dap6_dout_pa1, dap6_din_pa2, + dap6_fs_pa3, dap4_sclk_pa4, dap4_dout_pa5, + dap4_din_pa6, dap4_fs_pa7, soc_gpio08_pb0, + qspi0_sck_pc0, qspi0_cs_n_pc1, + qspi0_io0_pc2, qspi0_io1_pc3, qspi0_io2_pc4, + qspi0_io3_pc5, qspi1_sck_pc6, qspi1_cs_n_pc7, + qspi1_io0_pd0, qspi1_io1_pd1, qspi1_io2_pd2, + qspi1_io3_pd3, eqos_txc_pe0, eqos_td0_pe1, + eqos_td1_pe2, eqos_td2_pe3, eqos_td3_pe4, + eqos_tx_ctl_pe5, eqos_rd0_pe6, eqos_rd1_pe7, + eqos_rd2_pf0, eqos_rd3_pf1, eqos_rx_ctl_pf2, + eqos_rxc_pf3, eqos_sma_mdio_pf4, eqos_sma_mdc_pf5, + soc_gpio13_pg0, soc_gpio14_pg1, soc_gpio15_pg2, + soc_gpio16_pg3, soc_gpio17_pg4, soc_gpio18_pg5, + soc_gpio19_pg6, soc_gpio20_pg7, soc_gpio21_ph0, + soc_gpio22_ph1, soc_gpio06_ph2, uart4_tx_ph3, + uart4_rx_ph4, uart4_rts_ph5, uart4_cts_ph6, + soc_gpio41_ph7, soc_gpio42_pi0, soc_gpio43_pi1, + soc_gpio44_pi2, gen1_i2c_scl_pi3, gen1_i2c_sda_pi4, + cpu_pwr_req_pi5, soc_gpio07_pi6, + sdmmc1_clk_pj0, sdmmc1_cmd_pj1, sdmmc1_dat0_pj2, + sdmmc1_dat1_pj3, sdmmc1_dat2_pj4, sdmmc1_dat3_pj5, + pex_l0_clkreq_n_pk0, pex_l0_rst_n_pk1, + pex_l1_clkreq_n_pk2, pex_l1_rst_n_pk3, + pex_l2_clkreq_n_pk4, pex_l2_rst_n_pk5, + pex_l3_clkreq_n_pk6, pex_l3_rst_n_pk7, + pex_l4_clkreq_n_pl0, pex_l4_rst_n_pl1, + pex_wake_n_pl2, soc_gpio34_pl3, dp_aux_ch0_hpd_pm0, + dp_aux_ch1_hpd_pm1, dp_aux_ch2_hpd_pm2, + dp_aux_ch3_hpd_pm3, soc_gpio55_pm4, soc_gpio36_pm5, + soc_gpio53_pm6, soc_gpio38_pm7, dp_aux_ch3_n_pn0, + soc_gpio39_pn1, soc_gpio40_pn2, dp_aux_ch1_p_pn3, + dp_aux_ch1_n_pn4, dp_aux_ch2_p_pn5, dp_aux_ch2_n_pn6, + dp_aux_ch3_p_pn7, extperiph1_clk_pp0, + extperiph2_clk_pp1, cam_i2c_scl_pp2, cam_i2c_sda_pp3, + soc_gpio23_pp4, soc_gpio24_pp5, soc_gpio25_pp6, + pwr_i2c_scl_pp7, pwr_i2c_sda_pq0, soc_gpio28_pq1, + soc_gpio29_pq2, soc_gpio30_pq3, soc_gpio31_pq4, + soc_gpio32_pq5, soc_gpio33_pq6, soc_gpio35_pq7, + soc_gpio37_pr0, soc_gpio56_pr1, uart1_tx_pr2, + uart1_rx_pr3, uart1_rts_pr4, uart1_cts_pr5, + soc_gpio61_pw0, soc_gpio62_pw1, gpu_pwr_req_px0, + cv_pwr_req_px1, gp_pwm2_px2, gp_pwm3_px3, uart2_tx_px4, + uart2_rx_px5, uart2_rts_px6, uart2_cts_px7, spi3_sck_py0, + spi3_miso_py1, spi3_mosi_py2, spi3_cs0_py3, + spi3_cs1_py4, uart5_tx_py5, uart5_rx_py6, + uart5_rts_py7, uart5_cts_pz0, usb_vbus_en0_pz1, + usb_vbus_en1_pz2, spi1_sck_pz3, spi1_miso_pz4, + spi1_mosi_pz5, spi1_cs0_pz6, spi1_cs1_pz7, + spi5_sck_pac0, spi5_miso_pac1, spi5_mosi_pac2, + spi5_cs0_pac3, soc_gpio57_pac4, soc_gpio58_pac5, + soc_gpio59_pac6, soc_gpio60_pac7, soc_gpio45_pad0, + soc_gpio46_pad1, soc_gpio47_pad2, soc_gpio48_pad3, + ufs0_ref_clk_pae0, ufs0_rst_n_pae1, + pex_l5_clkreq_n_paf0, pex_l5_rst_n_paf1, + pex_l6_clkreq_n_paf2, pex_l6_rst_n_paf3, + pex_l7_clkreq_n_pag0, pex_l7_rst_n_pag1, + pex_l8_clkreq_n_pag2, pex_l8_rst_n_pag3, + pex_l9_clkreq_n_pag4, pex_l9_rst_n_pag5, + pex_l10_clkreq_n_pag6, pex_l10_rst_n_pag7, + sdmmc1_comp, eqos_comp, qspi_comp, + # drive groups + drive_soc_gpio08_pb0, drive_soc_gpio36_pm5, + drive_soc_gpio53_pm6, drive_soc_gpio55_pm4, + drive_soc_gpio38_pm7, drive_soc_gpio39_pn1, + drive_soc_gpio40_pn2, drive_dp_aux_ch0_hpd_pm0, + drive_dp_aux_ch1_hpd_pm1, drive_dp_aux_ch2_hpd_pm2, + drive_dp_aux_ch3_hpd_pm3, drive_dp_aux_ch1_p_pn3, + drive_dp_aux_ch1_n_pn4, drive_dp_aux_ch2_p_pn5, + drive_dp_aux_ch2_n_pn6, drive_dp_aux_ch3_p_pn7, + drive_dp_aux_ch3_n_pn0, drive_pex_l2_clkreq_n_pk4, + drive_pex_wake_n_pl2, drive_pex_l1_clkreq_n_pk2, + drive_pex_l1_rst_n_pk3, drive_pex_l0_clkreq_n_pk0, + drive_pex_l0_rst_n_pk1, drive_pex_l2_rst_n_pk5, + drive_pex_l3_clkreq_n_pk6, drive_pex_l3_rst_n_pk7, + drive_pex_l4_clkreq_n_pl0, drive_pex_l4_rst_n_pl1, + drive_soc_gpio34_pl3, drive_pex_l5_clkreq_n_paf0, + drive_pex_l5_rst_n_paf1, drive_pex_l6_clkreq_n_paf2, + drive_pex_l6_rst_n_paf3, drive_pex_l10_clkreq_n_pag6, + drive_pex_l10_rst_n_pag7, drive_pex_l7_clkreq_n_pag0, + drive_pex_l7_rst_n_pag1, drive_pex_l8_clkreq_n_pag2, + drive_pex_l8_rst_n_pag3, drive_pex_l9_clkreq_n_pag4, + drive_pex_l9_rst_n_pag5, drive_sdmmc1_clk_pj0, + drive_sdmmc1_cmd_pj1, drive_sdmmc1_dat3_pj5, + drive_sdmmc1_dat2_pj4, drive_sdmmc1_dat1_pj3, + drive_sdmmc1_dat0_pj2 ] + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/pinctrl-tegra.h> + + pinmux@2430000 { + compatible = "nvidia,tegra234-pinmux"; + reg = <0x2430000 0x17000>; + + pinctrl-names = "pex_rst"; + pinctrl-0 = <&pex_rst_c5_out_state>; + + pex_rst_c5_out_state: pinmux-pex-rst-c5-out { + pexrst { + nvidia,pins = "pex_l5_rst_n_paf1"; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml new file mode 100644 index 000000000000..fad0118fd521 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5018-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IPQ5018 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm IPQ5018 SoC. + +properties: + compatible: + const: qcom,ipq5018-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 24 + + gpio-line-names: + maxItems: 47 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-ipq5018-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-ipq5018-tlmm-state" + additionalProperties: false + +$defs: + qcom-ipq5018-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|[1-3][0-9]|4[0-6])$" + minItems: 1 + maxItems: 8 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ atest_char, audio_pdm0, audio_pdm1, audio_rxbclk, audio_rxd, + audio_rxfsync, audio_rxmclk, audio_txbclk, audio_txd, + audio_txfsync, audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart0, + blsp0_uart1, blsp1_i2c0, blsp1_i2c1, blsp1_spi0, blsp1_spi1, + blsp1_uart0, blsp1_uart1, blsp1_uart2, blsp2_i2c0, blsp2_i2c1, + blsp2_spi, blsp2_spi0, blsp2_spi1, btss, burn0, burn1, cri_trng, + cri_trng0, cri_trng1, cxc_clk, cxc_data, dbg_out, eud_gpio, + gcc_plltest, gcc_tlmm, gpio, led0, led2, mac0, mac1, mdc, mdio, + pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, pll_test, + prng_rosc, pwm0, pwm1, pwm2, pwm3, qdss_cti_trig_in_a0, + qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, + qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, + qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a, + qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, qspi_clk, qspi_cs, + qspi_data, reset_out, sdc1_clk, sdc1_cmd, sdc1_data, wci_txd, + wci_rxd, wsa_swrm, wsi_clk3, wsi_data3, wsis_reset, xfem ] + + required: + - pins + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq5018-tlmm"; + reg = <0x01000000 0x300000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 47>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + uart-w-state { + rx-pins { + pins = "gpio33"; + function = "blsp1_uart1"; + bias-pull-down; + }; + + tx-pins { + pins = "gpio34"; + function = "blsp1_uart1"; + bias-pull-down; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml index 673713debac2..e5e9962b2174 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml @@ -53,6 +53,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -86,19 +87,9 @@ $defs: rx0, rx1, sdc_clk, sdc_cmd, sdc_data, sdc_rclk, tsens_max, wci20, wci21, wsa_swrm ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml index eaadd5a9a445..8aaf50181cef 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml @@ -49,6 +49,7 @@ properties: - qcom,pm8921-gpio - qcom,pm8941-gpio - qcom,pm8950-gpio + - qcom,pm8953-gpio - qcom,pm8994-gpio - qcom,pm8998-gpio - qcom,pma8084-gpio @@ -175,6 +176,7 @@ allOf: - qcom,pm8350b-gpio - qcom,pm8550ve-gpio - qcom,pm8950-gpio + - qcom,pm8953-gpio - qcom,pmi632-gpio then: properties: @@ -434,6 +436,7 @@ $defs: - gpio1-gpio44 for pm8921 - gpio1-gpio36 for pm8941 - gpio1-gpio8 for pm8950 (hole on gpio3) + - gpio1-gpio8 for pm8953 (hole on gpio3 and gpio6) - gpio1-gpio22 for pm8994 - gpio1-gpio26 for pm8998 - gpio1-gpio22 for pma8084 diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml index c91d3e3a094b..80f960671857 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml @@ -144,8 +144,9 @@ $defs: enum: [0, 1, 2, 3, 4, 5, 6, 7] qcom,paired: - - description: - Indicates that the pin should be operating in paired mode. + type: boolean + description: + Indicates that the pin should be operating in paired mode. required: - pins diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml index 032763649336..c323f6d495a4 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml @@ -45,6 +45,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -81,19 +82,9 @@ $defs: uim2_data, uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1 ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml index 4ae39fc7894a..4bd6d7977d3e 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml @@ -55,6 +55,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -104,20 +105,9 @@ $defs: usb1_phy, usb1_sbrx, usb1_sbtx, usb1_usb4, usb2phy_ac, vsense_trigger ] - bias-bus-hold: true - bias-disable: true - bias-pull-down: true - bias-pull-up: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml index 2ef793ae4038..27319782d94b 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml @@ -85,7 +85,7 @@ $defs: qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, - dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, + dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, pcie_clkreq, dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25, sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml new file mode 100644 index 000000000000..7cb96aa75b08 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sdx75-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SDX75 TLMM block + +maintainers: + - Rohit Agarwal <quic_rohiagar@quicinc.com> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SDX75 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sdx75-tlmm + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 67 + + gpio-line-names: + maxItems: 133 + + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sdx75-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sdx75-tlmm-state" + additionalProperties: false + +$defs: + qcom-sdx75-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ adsp_ext, atest_char, audio_ref_clk, bimc_dte, char_exec, coex_uart2, + coex_uart, cri_trng, cri_trng0, cri_trng1, dbg_out_clk, ddr_bist, + ddr_pxi0, ebi0_wrcdc, ebi2_a, ebi2_lcd, ebi2_lcd_te, emac0_mcg, + emac0_ptp, emac1_mcg, emac1_ptp, emac_cdc, emac_pps_in, eth0_mdc, + eth0_mdio, eth1_mdc, eth1_mdio, ext_dbg, gcc_125_clk, gcc_gp1_clk, + gcc_gp2_clk, gcc_gp3_clk, gcc_plltest, gpio, i2s_mclk, jitter_bist, + ldo_en, ldo_update, m_voc, mgpi_clk, native_char, native_tsens, + native_tsense, nav_dr_sync, nav_gpio, pa_indicator, pci_e, + pcie0_clkreq_n, pcie1_clkreq_n, pcie2_clkreq_n, pll_bist_sync, + pll_clk_aux, pll_ref_clk, pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, + qlink0_b_en, qlink0_b_req, qlink0_l_en, qlink0_l_req, qlink0_wmss, + qlink1_l_en, qlink1_l_req, qlink1_wmss, qup_se0, qup_se1_l2_mira, + qup_se1_l2_mirb, qup_se1_l3_mira, qup_se1_l3_mirb, qup_se2, qup_se3, + qup_se4, qup_se5, qup_se6, qup_se7, qup_se8, rgmii_rx_ctl, rgmii_rxc, + rgmii_rxd, rgmii_tx_ctl, rgmii_txc, rgmii_txd, sd_card, sdc1_tb, + sdc2_tb_trig, sec_mi2s, sgmii_phy_intr0_n, sgmii_phy_intr1_n, + spmi_coex, spmi_vgi, tgu_ch0_trigout, tmess_prng0, tmess_prng1, + tmess_prng2, tmess_prng3, tri_mi2s, uim1_clk, uim1_data, uim1_present, + uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, + usb2phy_ac_en, vsense_trigger_mirnat] + + required: + - pins + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@f100000 { + compatible = "qcom,sdx75-tlmm"; + reg = <0x0f100000 0x300000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 133>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-wo-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-state { + rx-pins { + pins = "gpio12"; + function = "qup_se1_l2_mira"; + bias-disable; + }; + + tx-pins { + pins = "gpio13"; + function = "qup_se1_l3_mira"; + bias-disable; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml index a57d44efe5bd..ede0f3acad9c 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml @@ -62,6 +62,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -102,19 +103,9 @@ $defs: wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ] - bias-pull-down: true - bias-pull-up: true - bias-disable: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index 1ab0f8dde477..2120ef71a78d 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -27,6 +27,8 @@ properties: - st,stm32mp135-pinctrl - st,stm32mp157-pinctrl - st,stm32mp157-z-pinctrl + - st,stm32mp257-pinctrl + - st,stm32mp257-z-pinctrl '#address-cells': const: 1 @@ -56,7 +58,7 @@ properties: Indicates the SOC package used. More details in include/dt-bindings/pinctrl/stm32-pinfunc.h $ref: /schemas/types.yaml#/definitions/uint32 - enum: [1, 2, 4, 8] + enum: [0x1, 0x2, 0x4, 0x8, 0x100, 0x400, 0x800] patternProperties: '^gpio@[0-9a-f]*$': diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml index 598a042850b8..b85f9e36ce4b 100644 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Zynq Pinctrl maintainers: - - Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> + - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com> description: | Please refer to pinctrl-bindings.txt in this directory for details of the diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml index 2722dc7bb03d..24ad0614e61b 100644 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml @@ -7,8 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx ZynqMP Pinctrl maintainers: - - Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> - - Rajan Vaja <rajan.vaja@xilinx.com> + - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com> description: | Please refer to pinctrl-bindings.txt in this directory for details of the diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml index afad3135ed67..f9c211a9a938 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml @@ -29,6 +29,7 @@ properties: - qcom,qcm2290-rpmpd - qcom,qcs404-rpmpd - qcom,qdu1000-rpmhpd + - qcom,sa8155p-rpmhpd - qcom,sa8540p-rpmhpd - qcom,sa8775p-rpmhpd - qcom,sdm660-rpmpd diff --git a/Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml b/Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml new file mode 100644 index 000000000000..f559a2cfd82e --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/atmel,at91sam9260-shdwc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip AT91 SHDWC Shutdown Controller + +maintainers: + - Claudiu Beznea <claudiu.beznea@microchip.com> + +description: | + Microchip AT91 SHDWC shutdown controller controls the power supplies VDDIO + and VDDCORE and the wake-up detection on debounced input lines. + +properties: + compatible: + enum: + - atmel,at91sam9260-shdwc + - atmel,at91sam9rl-shdwc + - atmel,at91sam9x5-shdwc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + atmel,wakeup-mode: + description: operation mode of the wakeup mode + $ref: /schemas/types.yaml#/definitions/string + enum: [ none, high, low, any ] + + atmel,wakeup-counter: + description: counter on wake-up 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + + atmel,wakeup-rtt-timer: + description: enable real-time timer wake-up + type: boolean + + atmel,wakeup-rtc-timer: + description: enable real-time clock wake-up + type: boolean + +required: + - compatible + - reg + - clocks + +allOf: + - if: + properties: + compatible: + contains: + const: atmel,at91sam9x5-shdwc + then: + properties: + atmel,wakeup-rtt-timer: false + + - if: + properties: + compatible: + contains: + const: atmel,at91sam9260-shdwc + then: + properties: + atmel,wakeup-rtc-timer: false + +additionalProperties: false + +examples: + - | + shdwc: poweroff@fffffd10 { + compatible = "atmel,at91sam9260-shdwc"; + reg = <0xfffffd10 0x10>; + clocks = <&clk32k>; + }; + +... diff --git a/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml b/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml new file mode 100644 index 000000000000..8c58e12cdb60 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/atmel,sama5d2-shdwc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip AT91 SAMA5D2 SHDWC Shutdown Controller + +maintainers: + - Claudiu Beznea <claudiu.beznea@microchip.com> + +description: | + Microchip AT91 SHDWC shutdown controller controls the power supplies VDDIO + and VDDCORE and the wake-up detection on debounced input lines. + +properties: + compatible: + oneOf: + - items: + - const: microchip,sama7g5-shdwc + - const: syscon + - enum: + - atmel,sama5d2-shdwc + - microchip,sam9x60-shdwc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + debounce-delay-us: + description: + Minimum wake-up inputs debouncer period in microseconds. It is usually a + board-related property. + + atmel,wakeup-rtc-timer: + description: enable real-time clock wake-up + type: boolean + + atmel,wakeup-rtt-timer: + description: enable real-time timer wake-up + type: boolean + +patternProperties: + "^input@[0-15]$": + description: + Wake-up input nodes. These are usually described in the "board" part of + the Device Tree. Note also that input 0 is linked to the wake-up pin and + is frequently used. + type: object + properties: + reg: + description: contains the wake-up input index + minimum: 0 + maximum: 15 + + atmel,wakeup-active-high: + description: + The corresponding wake-up input described by the child forces the + wake-up of the core power supply on a high level. The default is to + be active low. + type: boolean + + required: + - reg + + additionalProperties: false + +required: + - compatible + - reg + - clocks + +allOf: + - if: + properties: + compatible: + contains: + const: atmel,sama5d2-shdwc + then: + properties: + atmel,wakeup-rtt-timer: false + +additionalProperties: false + +examples: + - | + shdwc: poweroff@f8048010 { + compatible = "atmel,sama5d2-shdwc"; + reg = <0xf8048010 0x10>; + clocks = <&clk32k>; + #address-cells = <1>; + #size-cells = <0>; + atmel,wakeup-rtc-timer; + debounce-delay-us = <976>; + + input@0 { + reg = <0>; + }; + + input@1 { + reg = <1>; + atmel,wakeup-active-high; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.txt b/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.txt deleted file mode 100644 index 93f31ca1ef4b..000000000000 --- a/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.txt +++ /dev/null @@ -1,14 +0,0 @@ -Broadcom Kona Family Reset Manager ----------------------------------- - -The reset manager is used on the Broadcom BCM21664 SoC. - -Required properties: - - compatible: brcm,bcm21664-resetmgr - - reg: memory address & range - -Example: - brcm,resetmgr@35001f00 { - compatible = "brcm,bcm21664-resetmgr"; - reg = <0x35001f00 0x24>; - }; diff --git a/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.yaml b/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.yaml new file mode 100644 index 000000000000..3e28a59d718f --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/brcm,bcm21664-resetmgr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Kona family reset manager + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + const: brcm,bcm21664-resetmgr + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + reset-controller@35001f00 { + compatible = "brcm,bcm21664-resetmgr"; + reg = <0x35001f00 0x24>; + }; +... diff --git a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt deleted file mode 100644 index 752d6126d5da..000000000000 --- a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt +++ /dev/null @@ -1,26 +0,0 @@ -NVMEM reboot mode driver - -This driver gets reboot mode magic value from reboot-mode driver -and stores it in a NVMEM cell named "reboot-mode". Then the bootloader -can read it and take different action according to the magic -value stored. - -Required properties: -- compatible: should be "nvmem-reboot-mode". -- nvmem-cells: A phandle to the reboot mode provided by a nvmem device. -- nvmem-cell-names: Should be "reboot-mode". - -The rest of the properties should follow the generic reboot-mode description -found in reboot-mode.txt - -Example: - reboot-mode { - compatible = "nvmem-reboot-mode"; - nvmem-cells = <&reboot_mode>; - nvmem-cell-names = "reboot-mode"; - - mode-normal = <0xAAAA5501>; - mode-bootloader = <0xBBBB5500>; - mode-recovery = <0xCCCC5502>; - mode-test = <0xDDDD5503>; - }; diff --git a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml new file mode 100644 index 000000000000..14a262bcbf7c --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/nvmem-reboot-mode.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic NVMEM reboot mode + +maintainers: + - Bartosz Golaszewski <bartosz.golaszewski@linaro.org> + +description: + This driver gets the reboot mode magic value from the reboot-mode driver + and stores it in the NVMEM cell named "reboot-mode". The bootloader can + then read it and take different action according to the value. + +properties: + compatible: + const: nvmem-reboot-mode + + nvmem-cells: + description: + A phandle pointing to the nvmem-cells node where the vendor-specific + magic value representing the reboot mode is stored. + maxItems: 1 + + nvmem-cell-names: + items: + - const: reboot-mode + +patternProperties: + "^mode-.+": + $ref: /schemas/types.yaml#/definitions/uint32 + description: Vendor-specific mode value written to the mode register + +required: + - compatible + - nvmem-cells + - nvmem-cell-names + +additionalProperties: false + +examples: + - | + reboot-mode { + compatible = "nvmem-reboot-mode"; + nvmem-cells = <&reboot_reason>; + nvmem-cell-names = "reboot-mode"; + mode-recovery = <0x01>; + mode-bootloader = <0x02>; + }; +... diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml index d96170eecbd2..5e460128b0d1 100644 --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml @@ -19,6 +19,7 @@ properties: compatible: enum: - qcom,pm8916-pon + - qcom,pm8941-pon - qcom,pms405-pon - qcom,pm8998-pon - qcom,pmk8350-pon @@ -56,7 +57,6 @@ required: unevaluatedProperties: false allOf: - - $ref: reboot-mode.yaml# - if: properties: compatible: @@ -66,12 +66,30 @@ allOf: - qcom,pms405-pon - qcom,pm8998-pon then: + allOf: + - $ref: reboot-mode.yaml# + + properties: + reg: + maxItems: 1 + reg-names: + items: + - const: pon + + # Special case for pm8941, which doesn't store reset mode + - if: + properties: + compatible: + contains: + const: qcom,pm8941-pon + then: properties: reg: maxItems: 1 reg-names: items: - const: pon + - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/power/reset/restart-handler.yaml b/Documentation/devicetree/bindings/power/reset/restart-handler.yaml index 1f9a2aac53c0..f2ffdd29d52a 100644 --- a/Documentation/devicetree/bindings/power/reset/restart-handler.yaml +++ b/Documentation/devicetree/bindings/power/reset/restart-handler.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/power/reset/restart-handler.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Restart and shutdown handler generic binding +title: Restart and shutdown handler Common Properties maintainers: - Sebastian Reichel <sre@kernel.org> diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml index 11f1f98c1cdc..45792e216981 100644 --- a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml +++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Zynq MPSoC Power Management maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> description: | The zynqmp-power node describes the power management configurations. diff --git a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml index 82f382a7ffb3..4fe9c3705265 100644 --- a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml @@ -68,11 +68,29 @@ properties: Interrupt sends an active low, 256 μs pulse to host to report the charger device status and faults. + ti,no-thermistor: + type: boolean + description: Indicates that no thermistor is connected to the TS pin + required: - compatible - reg - monitored-battery +allOf: + - if: + properties: + compatible: + contains: + enum: + - ti,bq25600 + - ti,bq25601 + - ti,bq25600d + - ti,bq25601d + then: + properties: + ti,no-thermistor: false + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml new file mode 100644 index 000000000000..277c47e048b6 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/qcom,pmi8998-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PMI8998/PM660 Switch-Mode Battery Charger "2" + +maintainers: + - Caleb Connolly <caleb.connolly@linaro.org> + +properties: + compatible: + enum: + - qcom,pmi8998-charger + - qcom,pm660-charger + + reg: + maxItems: 1 + + interrupts: + maxItems: 4 + + interrupt-names: + items: + - const: usb-plugin + - const: bat-ov + - const: wdog-bark + - const: usbin-icl-change + + io-channels: + items: + - description: USB in current in uA + - description: USB in voltage in uV + + io-channel-names: + items: + - const: usbin_i + - const: usbin_v + + monitored-battery: + description: phandle to the simple-battery node + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - reg + - interrupts + - interrupt-names + - io-channels + - io-channel-names + - monitored-battery + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + pmic { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <4>; + + charger@1000 { + compatible = "qcom,pmi8998-charger"; + reg = <0x1000>; + + interrupts = <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>, + <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "usb-plugin", "bat-ov", "wdog-bark", "usbin-icl-change"; + + io-channels = <&pmi8998_rradc 3>, + <&pmi8998_rradc 4>; + io-channel-names = "usbin_i", + "usbin_v"; + + monitored-battery = <&battery>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml index 756c16d1727d..b5d8888d03d2 100644 --- a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml @@ -26,7 +26,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml new file mode 100644 index 000000000000..5b3edd79a523 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/richtek,rt5033-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT5033 PMIC Battery Charger + +maintainers: + - Jakob Hauser <jahau@rocketmail.com> + +description: + The battery charger of the multifunction device RT5033 has to be instantiated + under sub-node named "charger" using the following format. + +properties: + compatible: + const: richtek,rt5033-charger + + monitored-battery: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + Phandle to the monitored battery according to battery.yaml. The battery + node needs to contain five parameters. + + precharge-current-microamp: + Current of pre-charge mode. The pre-charge current levels are 350 mA + to 650 mA programmed by I2C per 100 mA. + + constant-charge-current-max-microamp: + Current of fast-charge mode. The fast-charge current levels are 700 mA + to 2000 mA programmed by I2C per 100 mA. + + charge-term-current-microamp: + This property is end of charge current. Its level ranges from 150 mA + to 600 mA. Between 150 mA and 300 mA in 50 mA steps, between 300 mA and + 600 mA in 100 mA steps. + + precharge-upper-limit-microvolt: + Voltage of pre-charge mode. If the battery voltage is below the pre-charge + threshold voltage, the charger is in pre-charge mode with pre-charge + current. Its levels are 2.3 V to 3.8 V programmed by I2C per 0.1 V. + + constant-charge-voltage-max-microvolt: + Battery regulation voltage of constant voltage mode. This voltage levels + from 3.65 V to 4.4 V by I2C per 0.025 V. + + richtek,usb-connector: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to a USB connector according to usb-connector.yaml. The connector + should be a child of the extcon device. + +required: + - monitored-battery + +additionalProperties: false + +examples: + - | + charger { + compatible = "richtek,rt5033-charger"; + monitored-battery = <&battery>; + richtek,usb-connector = <&usb_con>; + }; diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml index 3ce648dd91bd..34b7959d6772 100644 --- a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml +++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml @@ -22,6 +22,7 @@ properties: compatible: oneOf: - enum: + - x-powers,axp192-usb-power-supply - x-powers,axp202-usb-power-supply - x-powers,axp221-usb-power-supply - x-powers,axp223-usb-power-supply diff --git a/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml b/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml index ab45df80345d..d84268b59784 100644 --- a/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml @@ -11,7 +11,7 @@ maintainers: - Claudiu Beznea <claudiu.beznea@microchip.com> allOf: - - $ref: "pwm.yaml#" + - $ref: pwm.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml index 0088bc8e7c54..153e146df7d4 100644 --- a/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml +++ b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml @@ -22,7 +22,9 @@ properties: - mediatek,mt8173-disp-pwm - mediatek,mt8183-disp-pwm - items: - - const: mediatek,mt8167-disp-pwm + - enum: + - mediatek,mt6795-disp-pwm + - mediatek,mt8167-disp-pwm - const: mediatek,mt8173-disp-pwm - items: - enum: diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml index a34cbc13f691..6ffbed204c25 100644 --- a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml @@ -25,7 +25,7 @@ properties: const: 3 fsl,pwm-number: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: u32 value representing the number of PWM devices required: diff --git a/Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml b/Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml new file mode 100644 index 000000000000..9e36d5467b56 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/adi,max77541-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Buck Converter for MAX77540/MAX77541 + +maintainers: + - Okan Sahin <okan.sahin@analog.com> + +description: | + This is a part of device tree bindings for ADI MAX77540/MAX77541 + + The buck converter is represented as a sub-node of the PMIC node on the device tree. + + The device has two buck regulators. + See also Documentation/devicetree/bindings/mfd/adi,max77541.yaml for + additional information and example. + +patternProperties: + "^buck[12]$": + type: object + $ref: regulator.yaml# + additionalProperties: false + description: | + Buck regulator. + + properties: + regulator-name: true + regulator-always-on: true + regulator-boot-on: true + regulator-min-microvolt: + minimum: 300000 + regulator-max-microvolt: + maximum: 5200000 + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt index 7034cdca54e0..b6384306db5c 100644 --- a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt @@ -8,15 +8,14 @@ Documentation/devicetree/bindings/regulator/regulator.txt. The valid names for regulators are:: BUCK: - buck_vdram1, buck_vcore, buck_vcore_sshub, buck_vpa, buck_vproc11, - buck_vproc12, buck_vgpu, buck_vs2, buck_vmodem, buck_vs1 + buck_vdram1, buck_vcore, buck_vpa, buck_vproc11, buck_vproc12, buck_vgpu, + buck_vs2, buck_vmodem, buck_vs1 LDO: ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio, ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others, - ldo_vsram_others_sshub, ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, - ldo_vmch, ldo_vbif28, ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, - ldo_vrf18, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, - ldo_vsim2 + ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vmch, ldo_vbif28, + ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vrf18, + ldo_vcn33, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, ldo_vsim2 Example: @@ -305,15 +304,8 @@ Example: regulator-enable-ramp-delay = <120>; }; - mt6358_vcn33_bt_reg: ldo_vcn33_bt { - regulator-name = "vcn33_bt"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3500000>; - regulator-enable-ramp-delay = <270>; - }; - - mt6358_vcn33_wifi_reg: ldo_vcn33_wifi { - regulator-name = "vcn33_wifi"; + mt6358_vcn33_reg: ldo_vcn33 { + regulator-name = "vcn33"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3500000>; regulator-enable-ramp-delay = <270>; @@ -354,17 +346,5 @@ Example: regulator-max-microvolt = <3100000>; regulator-enable-ramp-delay = <540>; }; - - mt6358_vcore_sshub_reg: buck_vcore_sshub { - regulator-name = "vcore_sshub"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1293750>; - }; - - mt6358_vsram_others_sshub_reg: ldo_vsram_others_sshub { - regulator-name = "vsram_others_sshub"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1293750>; - }; }; }; diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.yaml b/Documentation/devicetree/bindings/regulator/pfuze100.yaml index 67a30b23b92c..e384e4953f0a 100644 --- a/Documentation/devicetree/bindings/regulator/pfuze100.yaml +++ b/Documentation/devicetree/bindings/regulator/pfuze100.yaml @@ -36,6 +36,9 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 1 + fsl,pfuze-support-disable-sw: $ref: /schemas/types.yaml#/definitions/flag description: | diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml b/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml index 7e58471097f8..80ecf938b749 100644 --- a/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml @@ -64,6 +64,7 @@ properties: defined, <100> is assumed, meaning that pwm-dutycycle-range contains values expressed in percent. + $ref: /schemas/types.yaml#/definitions/uint32 default: 100 pwm-dutycycle-range: diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml index b1cff3adb21b..89c564dfa5db 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml @@ -14,6 +14,9 @@ description: | regulator will be enabled in situations where the device is required to provide power to the connected peripheral. +allOf: + - $ref: regulator.yaml# + properties: compatible: enum: @@ -25,8 +28,11 @@ properties: required: - compatible + - reg + - regulator-min-microamp + - regulator-max-microamp -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -36,6 +42,8 @@ examples: pm8150b_vbus: usb-vbus-regulator@1100 { compatible = "qcom,pm8150b-vbus-reg"; reg = <0x1100>; + regulator-min-microamp = <500000>; + regulator-max-microamp = <3000000>; }; }; ... diff --git a/Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml b/Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml new file mode 100644 index 000000000000..97cff71d2967 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/renesas,raa215300.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RAA215300 Power Management Integrated Circuit (PMIC) + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +description: | + The RAA215300 is a high-performance, low-cost 9-channel PMIC designed for + 32-bit and 64-bit MCU and MPU applications. It supports DDR3, DDR3L, DDR4, + and LPDDR4 memory power requirements. The internally compensated regulators, + built-in Real-Time Clock (RTC), 32kHz crystal oscillator, and coin cell + battery charger provide a highly integrated, small footprint power solution + ideal for System-On-Module (SOM) applications. A spread spectrum feature + provides an ease-of-use solution for noise-sensitive audio or RF applications. + + This device exposes two devices via I2C. One for the integrated RTC IP, and + one for everything else. + + Link to datasheet: + https://www.renesas.com/in/en/products/power-power-management/multi-channel-power-management-ics-pmics/ssdsoc-power-management-ics-pmic-and-pmus/raa215300-high-performance-9-channel-pmic-supporting-ddr-memory-built-charger-and-rtc + +properties: + compatible: + enum: + - renesas,raa215300 + + reg: + maxItems: 2 + + reg-names: + items: + - const: main + - const: rtc + + interrupts: + maxItems: 1 + + clocks: + description: | + The clocks are optional. The RTC is disabled, if no clocks are + provided(either xin or clkin). + maxItems: 1 + + clock-names: + description: | + Use xin, if connected to an external crystal. + Use clkin, if connected to an external clock signal. + enum: + - xin + - clkin + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +examples: + - | + /* 32.768kHz crystal */ + x2: x2-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + raa215300: pmic@12 { + compatible = "renesas,raa215300"; + reg = <0x12>, <0x6f>; + reg-names = "main", "rtc"; + + clocks = <&x2>; + clock-names = "xin"; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62870.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62870.yaml new file mode 100644 index 000000000000..386989544dac --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/ti,tps62870.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/ti,tps62870.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TPS62870/TPS62871/TPS62872/TPS62873 voltage regulator + +maintainers: + - Mårten Lindahl <marten.lindahl@axis.com> + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - ti,tps62870 + - ti,tps62871 + - ti,tps62872 + - ti,tps62873 + + reg: + maxItems: 1 + + regulator-initial-mode: + enum: [ 1, 2 ] + description: 1 - Forced PWM mode, 2 - Low power mode + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@41 { + compatible = "ti,tps62873"; + reg = <0x41>; + regulator-name = "+0.75V"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1675000>; + regulator-initial-mode = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml index 959a56f1b6c7..370af61d8f28 100644 --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml @@ -25,7 +25,14 @@ properties: maxItems: 3 resets: - maxItems: 1 + minItems: 1 + maxItems: 2 + + reset-names: + items: + - const: mcu_rst + - const: hold_boot + minItems: 1 st,syscfg-holdboot: description: remote processor reset hold boot @@ -37,6 +44,7 @@ properties: - description: The field mask of the hold boot st,syscfg-tz: + deprecated: true description: Reference to the system configuration which holds the RCC trust zone mode $ref: /schemas/types.yaml#/definitions/phandle-array @@ -135,22 +143,48 @@ required: - compatible - reg - resets - - st,syscfg-holdboot - - st,syscfg-tz + +allOf: + - if: + properties: + reset-names: + not: + contains: + const: hold_boot + then: + required: + - st,syscfg-holdboot + else: + properties: + st,syscfg-holdboot: false additionalProperties: false examples: - | #include <dt-bindings/reset/stm32mp1-resets.h> - m4_rproc: m4@10000000 { + m4@10000000 { compatible = "st,stm32mp1-m4"; reg = <0x10000000 0x40000>, <0x30000000 0x40000>, <0x38000000 0x10000>; resets = <&rcc MCU_R>; + reset-names = "mcu_rst"; + /* Hold boot managed using system config*/ st,syscfg-holdboot = <&rcc 0x10C 0x1>; - st,syscfg-tz = <&rcc 0x000 0x1>; + st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>; + st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>; + }; + - | + #include <dt-bindings/reset/stm32mp1-resets.h> + m4@10000000 { + compatible = "st,stm32mp1-m4"; + reg = <0x10000000 0x40000>, + <0x30000000 0x40000>, + <0x38000000 0x10000>; + /* Hold boot managed using SCMI reset controller */ + resets = <&scmi MCU_R>, <&scmi MCU_HOLD_BOOT_R>; + reset-names = "mcu_rst", "hold_boot"; st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>; st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>; }; diff --git a/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml index c6d86964b72a..35f0bb38f7b2 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/remoteproc/ti,pru-consumer.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Common TI PRU Consumer Binding +title: TI PRU Consumer Common Properties maintainers: - Suman Anna <s-anna@ti.com> diff --git a/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml b/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml index 05b6648b3458..851ec24d6142 100644 --- a/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml +++ b/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/reserved-memory/framebuffer.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: /reserved-memory framebuffer node bindings +title: /reserved-memory framebuffer node maintainers: - devicetree-spec@vger.kernel.org diff --git a/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml b/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml index ee8a2dcf5dfa..0c0135964b91 100644 --- a/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml +++ b/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Canaan Kendryte K210 Reset Controller maintainers: - - Damien Le Moal <damien.lemoal@wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: | Canaan Kendryte K210 reset controller driver which supports the SoC diff --git a/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml b/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml new file mode 100644 index 000000000000..34c5c1c08ec1 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/nuvoton,ma35d1-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton MA35D1 Reset Controller + +maintainers: + - Chi-Fang Li <cfli0@nuvoton.com> + - Jacky Huang <ychuang3@nuvoton.com> + +description: + The system reset controller can be used to reset various peripheral + controllers in MA35D1 SoC. + +properties: + compatible: + items: + - const: nuvoton,ma35d1-reset + + reg: + maxItems: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + # system reset controller node: + - | + + system-management@40460000 { + compatible = "nuvoton,ma35d1-reset"; + reg = <0x40460000 0x200>; + #reset-cells = <1>; + }; +... + diff --git a/Documentation/devicetree/bindings/reset/oxnas,reset.txt b/Documentation/devicetree/bindings/reset/oxnas,reset.txt deleted file mode 100644 index d27ccb5d04fc..000000000000 --- a/Documentation/devicetree/bindings/reset/oxnas,reset.txt +++ /dev/null @@ -1,32 +0,0 @@ -Oxford Semiconductor OXNAS SoC Family RESET Controller -================================================ - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: For OX810SE, should be "oxsemi,ox810se-reset" - For OX820, should be "oxsemi,ox820-reset" -- #reset-cells: 1, see below - -Parent node should have the following properties : -- compatible: For OX810SE, should be : - "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd" - For OX820, should be : - "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd" - -Reset indices are in dt-bindings include files : -- For OX810SE: include/dt-bindings/reset/oxsemi,ox810se.h -- For OX820: include/dt-bindings/reset/oxsemi,ox820.h - -example: - -sys: sys-ctrl@000000 { - compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"; - reg = <0x000000 0x100000>; - - reset: reset-controller { - compatible = "oxsemi,ox810se-reset"; - #reset-cells = <1>; - }; -}; diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt deleted file mode 100644 index ed836868dbf1..000000000000 --- a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt +++ /dev/null @@ -1,55 +0,0 @@ --------------------------------------------------------------------------- - = Zynq UltraScale+ MPSoC and Versal reset driver binding = --------------------------------------------------------------------------- -The Zynq UltraScale+ MPSoC and Versal has several different resets. - -See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information -about zynqmp resets. - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required Properties: -- compatible: "xlnx,zynqmp-reset" for Zynq UltraScale+ MPSoC platform - "xlnx,versal-reset" for Versal platform -- #reset-cells: Specifies the number of cells needed to encode reset - line, should be 1 - -------- -Example -------- - -firmware { - zynqmp_firmware: zynqmp-firmware { - compatible = "xlnx,zynqmp-firmware"; - method = "smc"; - - zynqmp_reset: reset-controller { - compatible = "xlnx,zynqmp-reset"; - #reset-cells = <1>; - }; - }; -}; - -Specifying reset lines connected to IP modules -============================================== - -Device nodes that need access to reset lines should -specify them as a reset phandle in their corresponding node as -specified in reset.txt. - -For list of all valid reset indices for Zynq UltraScale+ MPSoC see -<dt-bindings/reset/xlnx-zynqmp-resets.h> -For list of all valid reset indices for Versal see -<dt-bindings/reset/xlnx-versal-resets.h> - -Example: - -serdes: zynqmp_phy@fd400000 { - ... - - resets = <&zynqmp_reset ZYNQMP_RESET_SATA>; - reset-names = "sata_rst"; - - ... -}; diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml new file mode 100644 index 000000000000..0d50f6a54af3 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/xlnx,zynqmp-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Zynq UltraScale+ MPSoC and Versal reset + +maintainers: + - Piyush Mehta <piyush.mehta@amd.com> + +description: | + The Zynq UltraScale+ MPSoC and Versal has several different resets. + + The PS reset subsystem is responsible for handling the external reset + input to the device and that all internal reset requirements are met + for the system (as a whole) and for the functional units. + + Please also refer to reset.txt in this directory for common reset + controller binding usage. Device nodes that need access to reset + lines should specify them as a reset phandle in their corresponding + node as specified in reset.txt. + + For list of all valid reset indices for Zynq UltraScale+ MPSoC + <dt-bindings/reset/xlnx-zynqmp-resets.h> + + For list of all valid reset indices for Versal + <dt-bindings/reset/xlnx-versal-resets.h> + +properties: + compatible: + enum: + - xlnx,zynqmp-reset + - xlnx,versal-reset + + "#reset-cells": + const: 1 + +required: + - compatible + - "#reset-cells" + +additionalProperties: false + +examples: + - | + zynqmp_reset: reset-controller { + compatible = "xlnx,zynqmp-reset"; + #reset-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/riscv/canaan.yaml b/Documentation/devicetree/bindings/riscv/canaan.yaml index f8f3f286bd55..41fd11f70a49 100644 --- a/Documentation/devicetree/bindings/riscv/canaan.yaml +++ b/Documentation/devicetree/bindings/riscv/canaan.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Canaan SoC-based boards maintainers: - - Damien Le Moal <damien.lemoal@wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: Canaan Kendryte K210 SoC-based boards diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index 3d2934b15e80..67bd239ead0b 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -23,6 +23,9 @@ description: | two cores, each of which has two hyperthreads, could be described as having four harts. +allOf: + - $ref: /schemas/cpu.yaml# + properties: compatible: oneOf: @@ -61,7 +64,7 @@ properties: hart. These values originate from the RISC-V Privileged Specification document, available from https://riscv.org/specifications/ - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: - riscv,sv32 - riscv,sv39 @@ -89,15 +92,18 @@ properties: Due to revisions of the ISA specification, some deviations have arisen over time. Notably, riscv,isa was defined prior to the creation of the - Zicsr and Zifencei extensions and thus "i" implies - "zicsr_zifencei". + Zicntr, Zicsr, Zifencei and Zihpm extensions and thus "i" + implies "zicntr_zicsr_zifencei_zihpm". While the isa strings in ISA specification are case insensitive, letters in the riscv,isa string must be all - lowercase to simplify parsing. - $ref: "/schemas/types.yaml#/definitions/string" + lowercase. + $ref: /schemas/types.yaml#/definitions/string pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[a-z])+)?(?:_[hsxz](?:[a-z])+)*$ + # RISC-V has multiple properties for cache op block sizes as the sizes + # differ between individual CBO extensions + cache-op-block-size: false # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here timebase-frequency: false @@ -120,7 +126,7 @@ properties: - interrupt-controller cpu-idle-states: - $ref: '/schemas/types.yaml#/definitions/phandle-array' + $ref: /schemas/types.yaml#/definitions/phandle-array items: maxItems: 1 description: | @@ -137,7 +143,7 @@ required: - riscv,isa - interrupt-controller -additionalProperties: true +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/riscv/thead.yaml b/Documentation/devicetree/bindings/riscv/thead.yaml new file mode 100644 index 000000000000..e62f6821372e --- /dev/null +++ b/Documentation/devicetree/bindings/riscv/thead.yaml @@ -0,0 +1,29 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/riscv/thead.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: T-HEAD SoC-based boards + +maintainers: + - Jisheng Zhang <jszhang@kernel.org> + +description: + T-HEAD SoC-based boards + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Sipeed Lichee Pi 4A board for the Sipeed Lichee Module 4A + items: + - enum: + - sipeed,lichee-pi-4a + - const: sipeed,lichee-module-4a + - const: thead,th1520 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1208.txt b/Documentation/devicetree/bindings/rtc/isil,isl1208.txt deleted file mode 100644 index 51f003006f04..000000000000 --- a/Documentation/devicetree/bindings/rtc/isil,isl1208.txt +++ /dev/null @@ -1,38 +0,0 @@ -Intersil ISL1209/19 I2C RTC/Alarm chip with event in - -ISL12X9 have additional pins EVIN and #EVDET for tamper detection, while the -ISL1208 and ISL1218 do not. They are all use the same driver with the bindings -described here, with chip specific properties as noted. - -Required properties supported by the device: - - "compatible": Should be one of the following: - - "isil,isl1208" - - "isil,isl1209" - - "isil,isl1218" - - "isil,isl1219" - - "reg": I2C bus address of the device - -Optional properties: - - "interrupt-names": list which may contains "irq" and "evdet" - evdet applies to isl1209 and isl1219 only - - "interrupts": list of interrupts for "irq" and "evdet" - evdet applies to isl1209 and isl1219 only - - "isil,ev-evienb": Enable or disable internal pull on EVIN pin - Applies to isl1209 and isl1219 only - Possible values are 0 and 1 - Value 0 enables internal pull-up on evin pin, 1 disables it. - Default will leave the non-volatile configuration of the pullup - as is. - -Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12 and #EVDET pin -connected to SoC gpio2 pin 24 and internal pull-up enabled in EVIN pin. - - isl1219: rtc@68 { - compatible = "isil,isl1219"; - reg = <0x68>; - interrupt-names = "irq", "evdet"; - interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>, - <&gpio2 24 IRQ_TYPE_EDGE_FALLING>; - isil,ev-evienb = <1>; - }; - diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml b/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml new file mode 100644 index 000000000000..11f7378d4997 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/isil,isl1208.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intersil ISL1209/19 I2C RTC/Alarm chip with event in + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + - Trent Piepho <tpiepho@gmail.com> + +description: + ISL12X9 have additional pins EVIN and EVDET for tamper detection, while the + ISL1208 and ISL1218 do not. + +properties: + compatible: + enum: + - isil,isl1208 + - isil,isl1209 + - isil,isl1218 + - isil,isl1219 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + description: | + Use xin, if connected to an external crystal. + Use clkin, if connected to an external clock signal. + enum: + - xin + - clkin + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + items: + - const: irq + - const: evdet + + isil,ev-evienb: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: | + Enable or disable internal pull on EVIN pin + Default will leave the non-volatile configuration of the pullup + as is. + <0> : Enables internal pull-up on evin pin + <1> : Disables internal pull-up on evin pin + +required: + - compatible + - reg + +allOf: + - $ref: rtc.yaml# + - if: + properties: + compatible: + contains: + enum: + - isil,isl1209 + - isil,isl1219 + then: + properties: + interrupts: + maxItems: 2 + interrupt-names: + items: + - const: irq + - const: evdet + else: + properties: + interrupts: + maxItems: 1 + interrupt-names: + items: + - const: irq + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rtc_twi: rtc@6f { + compatible = "isil,isl1208"; + reg = <0x6f>; + }; + }; diff --git a/Documentation/devicetree/bindings/rtc/loongson,rtc.yaml b/Documentation/devicetree/bindings/rtc/loongson,rtc.yaml new file mode 100644 index 000000000000..f89c1f660aee --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/loongson,rtc.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/loongson,rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson Real-Time Clock + +description: + The Loongson family chips use an on-chip counter 0 (Time Of Year + counter) as the RTC. + +maintainers: + - Binbin Zhou <zhoubinbin@loongson.cn> + +allOf: + - $ref: rtc.yaml# + +properties: + compatible: + oneOf: + - enum: + - loongson,ls1b-rtc + - loongson,ls1c-rtc + - loongson,ls7a-rtc + - loongson,ls2k1000-rtc + - items: + - enum: + - loongson,ls2k2000-rtc + - loongson,ls2k0500-rtc + - const: loongson,ls7a-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + rtc@1fe27800 { + compatible = "loongson,ls2k1000-rtc"; + reg = <0x1fe27800 0x100>; + + interrupt-parent = <&liointc1>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + }; + +... diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml index c6fff5486fe6..efb66df82782 100644 --- a/Documentation/devicetree/bindings/rtc/rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/rtc.yaml @@ -15,7 +15,7 @@ description: | properties: $nodename: - pattern: "^rtc(@.*|-[0-9a-f])*$" + pattern: "^rtc(@.*|-([0-9]|[1-9][0-9]+))?$" aux-voltage-chargeable: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml index a3603e638c37..9af77f21bb7f 100644 --- a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml @@ -47,8 +47,6 @@ properties: - isil,isl1218 # Intersil ISL12022 Real-time Clock - isil,isl12022 - # Loongson-2K Socs/LS7A bridge Real-time Clock - - loongson,ls2x-rtc # Real Time Clock Module with I2C-Bus - microcrystal,rv3029 # Real Time Clock diff --git a/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml index 7ed0230f6c67..d1f5eb996dba 100644 --- a/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml @@ -11,7 +11,7 @@ description: The RTC controller has separate IRQ lines for seconds and alarm. maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> allOf: - $ref: rtc.yaml# diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml index eb3488d8f9ee..6a7be42da523 100644 --- a/Documentation/devicetree/bindings/serial/8250_omap.yaml +++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml @@ -70,6 +70,7 @@ properties: dsr-gpios: true rng-gpios: true dcd-gpios: true + rs485-rts-active-high: true rts-gpio: true power-domains: true clock-frequency: true diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml index a8b323d7bf94..e35ad1109efc 100644 --- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml +++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Cadence UART Controller maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/serial/nuvoton,ma35d1-serial.yaml b/Documentation/devicetree/bindings/serial/nuvoton,ma35d1-serial.yaml new file mode 100644 index 000000000000..a76af0f6009b --- /dev/null +++ b/Documentation/devicetree/bindings/serial/nuvoton,ma35d1-serial.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/nuvoton,ma35d1-serial.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton MA35D1 Universal Asynchronous Receiver/Transmitter (UART) + +maintainers: + - Min-Jen Chen <mjchen@nuvoton.com> + - Jacky Huang <ychuang3@nuvoton.com> + +allOf: + - $ref: serial.yaml + +properties: + compatible: + const: nuvoton,ma35d1-uart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/nuvoton,ma35d1-clk.h> + + serial@40700000 { + compatible = "nuvoton,ma35d1-uart"; + reg = <0x40700000 0x100>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk UART0_GATE>; + }; +... diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm23550-cdc.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm23550-cdc.yaml new file mode 100644 index 000000000000..1a952f569803 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm23550-cdc.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm23550-cdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM23550 Cluster Dormant Control + +description: + The Cluster Dormant Control block keeps the CPU in idle state. A command + needs to be sent to this block to bring the CPU into running state. + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + const: brcm,bcm23550-cdc + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + cdc@3fe0e000 { + compatible = "brcm,bcm23550-cdc"; + reg = <0x3fe0e000 0x78>; + }; +... diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml index 3fefd634bc69..a06ac2177444 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml @@ -33,6 +33,7 @@ properties: - mediatek,mt2701-pwrap - mediatek,mt6765-pwrap - mediatek,mt6779-pwrap + - mediatek,mt6795-pwrap - mediatek,mt6797-pwrap - mediatek,mt6873-pwrap - mediatek,mt7622-pwrap diff --git a/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml b/Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-gcr.yaml index 94e72f25b331..23e7e4ea01ff 100644 --- a/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml +++ b/Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-gcr.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- -$id: http://devicetree.org/schemas/arm/npcm/nuvoton,gcr.yaml# +$id: http://devicetree.org/schemas/soc/nuvoton/nuvoton,npcm-gcr.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Global Control Registers block in Nuvoton SoCs diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml index 798f15588ee2..9dc8e48c8af4 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml @@ -26,6 +26,7 @@ properties: items: - enum: - qcom,qdu1000-aoss-qmp + - qcom,sa8775p-aoss-qmp - qcom,sc7180-aoss-qmp - qcom,sc7280-aoss-qmp - qcom,sc8180x-aoss-qmp diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml index 14dd29471c80..f2c5ec7e6437 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml @@ -55,9 +55,10 @@ additionalProperties: false examples: - | eud@88e0000 { - compatible = "qcom,sc7280-eud","qcom,eud"; + compatible = "qcom,sc7280-eud", "qcom,eud"; reg = <0x88e0000 0x2000>, <0x88e2000 0x1000>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -67,6 +68,7 @@ examples: remote-endpoint = <&usb2_role_switch>; }; }; + port@1 { reg = <1>; eud_con: endpoint { diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml new file mode 100644 index 000000000000..031800985b5e --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,rpm-master-stats.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. (QTI) RPM Master Stats + +maintainers: + - Konrad Dybcio <konrad.dybcio@linaro.org> + +description: | + The Qualcomm RPM (Resource Power Manager) architecture includes a concept + of "RPM Masters". They can be thought of as "the local gang leaders", usually + spanning a single subsystem (e.g. APSS, ADSP, CDSP). All of the RPM decisions + (particularly around entering hardware-driven low power modes: XO shutdown + and total system-wide power collapse) are first made at Master-level, and + only then aggregated for the entire system. + + The Master Stats provide a few useful bits that can be used to assess whether + our device has entered the desired low-power mode, how long it took to do so, + the duration of that residence, how long it took to come back online, + how many times a given sleep state was entered and which cores are actively + voting for staying awake. + + This scheme has been used on various SoCs in the 2013-2023 era, with some + newer or higher-end designs providing this information through an SMEM query. + +properties: + compatible: + const: qcom,rpm-master-stats + + qcom,rpm-msg-ram: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: Phandle to an RPM MSG RAM slice containing the master stats + minItems: 1 + maxItems: 5 + + qcom,master-names: + $ref: /schemas/types.yaml#/definitions/string-array + description: + The name of the RPM Master which owns the MSG RAM slice where this + instance of Master Stats resides + minItems: 1 + maxItems: 5 + +required: + - compatible + - qcom,rpm-msg-ram + - qcom,master-names + +additionalProperties: false + +examples: + - | + stats { + compatible = "qcom,rpm-master-stats"; + qcom,rpm-msg-ram = <&apss_master_stats>, + <&mpss_master_stats>, + <&adsp_master_stats>, + <&cdsp_master_stats>, + <&tz_master_stats>; + qcom,master-names = "APSS", + "MPSS", + "ADSP", + "CDSP", + "TZ"; + }; +... diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml index a4046ba60846..af632d0e0355 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml @@ -124,6 +124,7 @@ required: - qcom,tcs-offset - reg - reg-names + - power-domains additionalProperties: false @@ -179,6 +180,7 @@ examples: <SLEEP_TCS 1>, <WAKE_TCS 1>, <CONTROL_TCS 0>; + power-domains = <&CLUSTER_PD>; }; - | diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml index ea86569a40d3..65c02a7fef80 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml @@ -81,6 +81,7 @@ if: contains: enum: - qcom,rpm-apq8084 + - qcom,rpm-msm8226 - qcom,rpm-msm8916 - qcom,rpm-msm8936 - qcom,rpm-msm8974 diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index 65a2d5a4f28d..e4fa6a07b4fa 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -24,6 +24,7 @@ properties: - rockchip,rk3588-bigcore1-grf - rockchip,rk3588-ioc - rockchip,rk3588-php-grf + - rockchip,rk3588-pipe-phy-grf - rockchip,rk3588-sys-grf - rockchip,rk3588-pcie3-phy-grf - rockchip,rk3588-pcie3-pipe-grf @@ -52,6 +53,7 @@ properties: - rockchip,rk3399-pmugrf - rockchip,rk3568-grf - rockchip,rk3568-pmugrf + - rockchip,rk3588-usb2phy-grf - rockchip,rv1108-grf - rockchip,rv1108-pmugrf - rockchip,rv1126-grf @@ -119,7 +121,7 @@ allOf: usbphy: type: object - $ref: "/schemas/phy/rockchip-usb-phy.yaml#" + $ref: /schemas/phy/rockchip-usb-phy.yaml# unevaluatedProperties: false @@ -134,14 +136,14 @@ allOf: gpio: type: object - $ref: "/schemas/gpio/rockchip,rk3328-grf-gpio.yaml#" + $ref: /schemas/gpio/rockchip,rk3328-grf-gpio.yaml# unevaluatedProperties: false power-controller: type: object - $ref: "/schemas/power/rockchip,power-controller.yaml#" + $ref: /schemas/power/rockchip,power-controller.yaml# unevaluatedProperties: false @@ -156,7 +158,7 @@ allOf: mipi-dphy-rx0: type: object - $ref: "/schemas/phy/rockchip-mipi-dphy-rx0.yaml#" + $ref: /schemas/phy/rockchip-mipi-dphy-rx0.yaml# unevaluatedProperties: false @@ -184,7 +186,7 @@ allOf: reboot-mode: type: object - $ref: "/schemas/power/reset/syscon-reboot-mode.yaml#" + $ref: /schemas/power/reset/syscon-reboot-mode.yaml# unevaluatedProperties: false @@ -199,6 +201,7 @@ allOf: - rockchip,rk3308-usb2phy-grf - rockchip,rk3328-usb2phy-grf - rockchip,rk3399-grf + - rockchip,rk3588-usb2phy-grf - rockchip,rv1108-grf then: @@ -238,7 +241,7 @@ allOf: io-domains: type: object - $ref: "/schemas/power/rockchip-io-domain.yaml#" + $ref: /schemas/power/rockchip-io-domain.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml index 5d8d9497f18e..e1d716df5dfa 100644 --- a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml @@ -17,6 +17,7 @@ select: enum: - samsung,exynos3250-pmu - samsung,exynos4210-pmu + - samsung,exynos4212-pmu - samsung,exynos4412-pmu - samsung,exynos5250-pmu - samsung,exynos5260-pmu @@ -36,6 +37,7 @@ properties: - enum: - samsung,exynos3250-pmu - samsung,exynos4210-pmu + - samsung,exynos4212-pmu - samsung,exynos4412-pmu - samsung,exynos5250-pmu - samsung,exynos5260-pmu @@ -50,6 +52,7 @@ properties: - enum: - samsung,exynos3250-pmu - samsung,exynos4210-pmu + - samsung,exynos4212-pmu - samsung,exynos4412-pmu - samsung,exynos5250-pmu - samsung,exynos5420-pmu @@ -125,6 +128,7 @@ allOf: enum: - samsung,exynos3250-pmu - samsung,exynos4210-pmu + - samsung,exynos4212-pmu - samsung,exynos4412-pmu - samsung,exynos5250-pmu - samsung,exynos5410-pmu @@ -143,6 +147,7 @@ allOf: enum: - samsung,exynos3250-pmu - samsung,exynos4210-pmu + - samsung,exynos4212-pmu - samsung,exynos4412-pmu - samsung,exynos5250-pmu - samsung,exynos5420-pmu diff --git a/Documentation/devicetree/bindings/sound/adi,max98388.yaml b/Documentation/devicetree/bindings/sound/adi,max98388.yaml new file mode 100644 index 000000000000..93ccd5905736 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,max98388.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,max98388.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX98388 Speaker Amplifier + +maintainers: + - Ryan Lee <ryans.lee@analog.com> + +description: + The MAX98388 is a mono Class-D speaker amplifier with I/V feedback. + The device provides a PCM interface for audio data and a standard + I2C interface for control data communication. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - adi,max98388 + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + + adi,vmon-slot-no: + description: slot number of the voltage feedback monitor + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 0 + + adi,imon-slot-no: + description: slot number of the current feedback monitor + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 1 + + adi,interleave-mode: + description: + For cases where a single combined channel for the I/V feedback data + is not sufficient, the device can also be configured to share + a single data output channel on alternating frames. + In this configuration, the current and voltage data will be frame + interleaved on a single output channel. + type: boolean + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + - '#sound-dai-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + max98388: amplifier@39 { + compatible = "adi,max98388"; + reg = <0x39>; + #sound-dai-cells = <0>; + adi,vmon-slot-no = <0>; + adi,imon-slot-no = <1>; + adi,interleave-mode; + reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/adi,ssm2518.yaml b/Documentation/devicetree/bindings/sound/adi,ssm2518.yaml new file mode 100644 index 000000000000..f3f32540779c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,ssm2518.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,ssm2518.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices SSM2518 audio amplifier + +maintainers: + - Lars-Peter Clausen <lars@metafoo.de> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: adi,ssm2518 + + reg: + maxItems: 1 + description: | + I2C address of the device. This will either be 0x34 (ADDR pin low) + or 0x35 (ADDR pin high) + + gpios: + maxItems: 1 + description: | + GPIO connected to the nSD pin. If the property is not present + it is assumed that the nSD pin is hardwired to always on. + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@34 { + compatible = "adi,ssm2518"; + reg = <0x34>; + gpios = <&gpio 5 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml b/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml new file mode 100644 index 000000000000..144450df5869 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,ssm3515.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices SSM3515 Audio Amplifier + +maintainers: + - Martin Povišer <povik+lin@cutebit.org> + +description: | + SSM3515 is a mono Class-D audio amplifier with digital input. + + https://www.analog.com/media/en/technical-documentation/data-sheets/SSM3515.pdf + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - adi,ssm3515 + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@14 { + compatible = "adi,ssm3515"; + reg = <0x14>; + #sound-dai-cells = <0>; + sound-name-prefix = "Left Tweeter"; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/audio-graph.yaml b/Documentation/devicetree/bindings/sound/audio-graph.yaml index c87eb91de159..ed31e04ff6a6 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph.yaml +++ b/Documentation/devicetree/bindings/sound/audio-graph.yaml @@ -24,7 +24,11 @@ properties: connection's sink, the second being the connection's source. $ref: /schemas/types.yaml#/definitions/non-unique-string-array widgets: - description: User specified audio sound widgets. + description: | + User specified audio sound widgets. + Each entry is a pair of strings, the first being the type of + widget ("Microphone", "Line", "Headphone", "Speaker"), the + second being the machine specific name for the widget. $ref: /schemas/types.yaml#/definitions/non-unique-string-array convert-rate: $ref: /schemas/sound/dai-params.yaml#/$defs/dai-sample-rate diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml index 2ab74f995685..4c9acb8d4c4c 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml @@ -62,7 +62,7 @@ patternProperties: GPIO pin direction. Valid only when 'gpio-ctrl' is 1 0 = Output 1 = Input - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1 default: 1 @@ -71,7 +71,7 @@ patternProperties: GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0 0 = Low 1 = High - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1 default: 0 @@ -80,7 +80,7 @@ patternProperties: GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0 0 = CMOS 1 = Open Drain - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1 default: 0 @@ -90,7 +90,7 @@ patternProperties: and 'gpio-dir' is 0 0 = Non-inverted, Active High 1 = Inverted, Active Low - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1 default: 0 @@ -114,7 +114,7 @@ patternProperties: 0 = High impedance input 1 = Pin acts as a GPIO, direction controlled by 'gpio-dir' 2-7 = Reserved - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 7 default: 0 diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml index 670b67ec0b61..f7bafbd4f1c2 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml @@ -44,6 +44,10 @@ properties: VAHP-supply: description: phandle to voltage regulator of headphone + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + required: - compatible - reg @@ -69,6 +73,13 @@ examples: VA-supply = <®_audio>; VAHP-supply = <®_audio>; reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>; + + /* assume audio-graph */ + port { + cpu_endpoint: endpoint { + remote-endpoint = <&cpu_endpoint>; + }; + }; }; }; ... diff --git a/Documentation/devicetree/bindings/sound/da7219.txt b/Documentation/devicetree/bindings/sound/da7219.txt deleted file mode 100644 index add1caf26ac2..000000000000 --- a/Documentation/devicetree/bindings/sound/da7219.txt +++ /dev/null @@ -1,112 +0,0 @@ -Dialog Semiconductor DA7219 Audio Codec bindings - -DA7219 is an audio codec with advanced accessory detect features. - -====== - -Required properties: -- compatible : Should be "dlg,da7219" -- reg: Specifies the I2C slave address - -- interrupts : IRQ line info for DA7219. - (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for - further information relating to interrupt properties) - -- VDD-supply: VDD power supply for the device -- VDDMIC-supply: VDDMIC power supply for the device -- VDDIO-supply: VDDIO power supply for the device - (See Documentation/devicetree/bindings/regulator/regulator.txt for further - information relating to regulators) - -Optional properties: -- interrupt-names : Name associated with interrupt line. Should be "wakeup" if - interrupt is to be used to wake system, otherwise "irq" should be used. -- wakeup-source: Flag to indicate this device can wake system (suspend/resume). - -- #clock-cells : Should be set to '<1>', two clock sources provided; -- clock-output-names : Names given for DAI clock outputs (WCLK & BCLK); - -- clocks : phandle and clock specifier for codec MCLK. -- clock-names : Clock name string for 'clocks' attribute, should be "mclk". - -- dlg,micbias-lvl : Voltage (mV) for Mic Bias - [<1600>, <1800>, <2000>, <2200>, <2400>, <2600>] -- dlg,mic-amp-in-sel : Mic input source type - ["diff", "se_p", "se_n"] - -Deprecated properties: -- dlg,ldo-lvl : Required internal LDO voltage (mV) level for digital engine - (LDO unavailable in production HW so property no longer required). - -====== - -Child node - 'da7219_aad': - -Optional properties: -- dlg,micbias-pulse-lvl : Mic bias higher voltage pulse level (mV). - [<2800>, <2900>] -- dlg,micbias-pulse-time : Mic bias higher voltage pulse duration (ms) -- dlg,btn-cfg : Periodic button press measurements for 4-pole jack (ms) - [<2>, <5>, <10>, <50>, <100>, <200>, <500>] -- dlg,mic-det-thr : Impedance threshold for mic detection measurement (Ohms) - [<200>, <500>, <750>, <1000>] -- dlg,jack-ins-deb : Debounce time for jack insertion (ms) - [<5>, <10>, <20>, <50>, <100>, <200>, <500>, <1000>] -- dlg,jack-det-rate: Jack type detection latency (3/4 pole) - ["32ms_64ms", "64ms_128ms", "128ms_256ms", "256ms_512ms"] -- dlg,jack-rem-deb : Debounce time for jack removal (ms) - [<1>, <5>, <10>, <20>] -- dlg,a-d-btn-thr : Impedance threshold between buttons A and D - [0x0 - 0xFF] -- dlg,d-b-btn-thr : Impedance threshold between buttons D and B - [0x0 - 0xFF] -- dlg,b-c-btn-thr : Impedance threshold between buttons B and C - [0x0 - 0xFF] -- dlg,c-mic-btn-thr : Impedance threshold between button C and Mic - [0x0 - 0xFF] -- dlg,btn-avg : Number of 8-bit readings for averaged button measurement - [<1>, <2>, <4>, <8>] -- dlg,adc-1bit-rpt : Repeat count for 1-bit button measurement - [<1>, <2>, <4>, <8>] - -====== - -Example: - - codec: da7219@1a { - compatible = "dlg,da7219"; - reg = <0x1a>; - - interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - - VDD-supply = <®_audio>; - VDDMIC-supply = <®_audio>; - VDDIO-supply = <®_audio>; - - #clock-cells = <1>; - clock-output-names = "dai-wclk", "dai-bclk"; - - clocks = <&clks 201>; - clock-names = "mclk"; - - dlg,ldo-lvl = <1200>; - dlg,micbias-lvl = <2600>; - dlg,mic-amp-in-sel = "diff"; - - da7219_aad { - dlg,btn-cfg = <50>; - dlg,mic-det-thr = <500>; - dlg,jack-ins-deb = <20>; - dlg,jack-det-rate = "32ms_64ms"; - dlg,jack-rem-deb = <1>; - - dlg,a-d-btn-thr = <0xa>; - dlg,d-b-btn-thr = <0x16>; - dlg,b-c-btn-thr = <0x21>; - dlg,c-mic-btn-thr = <0x3E>; - - dlg,btn-avg = <4>; - dlg,adc-1bit-rpt = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/dialog,da7219.yaml b/Documentation/devicetree/bindings/sound/dialog,da7219.yaml new file mode 100644 index 000000000000..bb5af48ab1e1 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/dialog,da7219.yaml @@ -0,0 +1,237 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/dialog,da7219.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog Semiconductor DA7219 Audio Codec + +maintainers: + - David Rau <David.Rau.opensource@dm.renesas.com> + +description: + The DA7219 is an ultra low-power audio codec with + in-built advanced accessory detection (AAD) for mobile + computing and accessory applications, which supports + sample rates up to 96 kHz at 24-bit resolution. + +properties: + compatible: + const: dlg,da7219 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + VDD-supply: + description: + VDD power supply for the device. + + VDDMIC-supply: + description: + VDDMIC power supply for the device. + + VDDIO-supply: + description: + VDDIO power supply for the device. + + interrupt-names: + description: + Should be "wakeup" if interrupt is to be used to wake system, + otherwise "irq" should be used. + enum: + - wakeup + - irq + + wakeup-source: + type: boolean + description: + Flag to indicate this device can wake system (suspend/resume). + + "#clock-cells": + const: 1 + + clock-output-names: + minItems: 2 + maxItems: 2 + description: + Name given for DAI WCLK and BCLK outputs. + + clocks: + maxItems: 1 + description: + phandle and clock specifier for codec MCLK. + + clock-names: + const: mclk + + dlg,micbias-lvl: + enum: [1600, 1800, 2000, 2200, 2400, 2600] + description: + Voltage (mV) for Mic Bias. + $ref: /schemas/types.yaml#/definitions/uint32 + + dlg,mic-amp-in-sel: + enum: ["diff", "se_p", "se_n"] + description: + Mic input source type. + + diff - Differential. + + se_p - MIC_P. + Positive differential analog microphone input. + + se_n - MIC_N. + Negative differential analog microphone input. + $ref: /schemas/types.yaml#/definitions/string + + da7219_aad: + type: object + description: + Configuration of advanced accessory detection. + properties: + dlg,micbias-pulse-lvl: + enum: [2800, 2900] + description: + Mic bias higher voltage pulse level (mV). + $ref: /schemas/types.yaml#/definitions/uint32 + + dlg,micbias-pulse-time: + description: + Mic bias higher voltage pulse duration (ms). + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + + dlg,btn-cfg: + enum: [2, 5, 10, 50, 100, 200, 500] + description: + Periodic button press measurements for 4-pole jack (ms). + $ref: /schemas/types.yaml#/definitions/uint32 + + dlg,mic-det-thr: + enum: [200, 500, 750, 1000] + description: + Impedance threshold for mic detection measurement (Ohms). + $ref: /schemas/types.yaml#/definitions/uint32 + + dlg,jack-ins-deb: + enum: [5, 10, 20, 50, 100, 200, 500, 1000] + description: + Debounce time for jack insertion (ms). + $ref: /schemas/types.yaml#/definitions/uint32 + + dlg,jack-ins-det-pty: + enum: ["low", "high"] + description: + Polarity for jack insertion detection. + $ref: /schemas/types.yaml#/definitions/string + + dlg,jack-det-rate: + enum: ["32_64", "64_128", "128_256", "256_512"] + description: + Jack type (3/4 pole) detection latency (ms). + $ref: /schemas/types.yaml#/definitions/string + + dlg,jack-rem-deb: + enum: [1, 5, 10, 20] + description: + Debounce time for jack removal (ms). + $ref: /schemas/types.yaml#/definitions/uint32 + + dlg,a-d-btn-thr: + description: + Impedance threshold between buttons A and D. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + + dlg,d-b-btn-thr: + description: + Impedance threshold between buttons D and B. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + + dlg,b-c-btn-thr: + description: + Impedance threshold between buttons B and C. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + + dlg,c-mic-btn-thr: + description: + Impedance threshold between button C and Mic. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + + dlg,btn-avg: + enum: [1, 2, 4, 8] + description: + Number of 8-bit readings for averaged button measurement. + $ref: /schemas/types.yaml#/definitions/uint32 + + dlg,adc-1bit-rpt: + enum: [1, 2, 4, 8] + description: + Repeat count for 1-bit button measurement. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - interrupts + - VDD-supply + - VDDMIC-supply + - VDDIO-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec: da7219@1a { + compatible = "dlg,da7219"; + reg = <0x1a>; + + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + + VDD-supply = <&vdd_reg>; + VDDMIC-supply = <&vddmic_reg>; + VDDIO-supply = <&vddio_reg>; + + #clock-cells = <1>; + clock-output-names = "da7219-dai-wclk", "da7219-dai-bclk"; + + clocks = <&clks 201>; + clock-names = "mclk"; + + dlg,micbias-lvl = <2600>; + dlg,mic-amp-in-sel = "diff"; + + da7219_aad { + dlg,btn-cfg = <50>; + dlg,mic-det-thr = <500>; + dlg,jack-ins-deb = <20>; + dlg,jack-ins-det-pty = "low"; + dlg,jack-det-rate = "32_64"; + dlg,jack-rem-deb = <1>; + + dlg,a-d-btn-thr = <0xa>; + dlg,d-b-btn-thr = <0x16>; + dlg,b-c-btn-thr = <0x21>; + dlg,c-mic-btn-thr = <0x3E>; + + dlg,btn-avg = <4>; + dlg,adc-1bit-rpt = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt index 8b4f4015cfe4..4e8dbc5abfd1 100644 --- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt +++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt @@ -46,6 +46,8 @@ The compatible list for this generic sound card currently: "fsl,imx-audio-wm8958" + "fsl,imx-audio-nau8822" + Required properties: - compatible : Contains one of entries in the compatible list. diff --git a/Documentation/devicetree/bindings/sound/google,chv3-codec.yaml b/Documentation/devicetree/bindings/sound/google,chv3-codec.yaml new file mode 100644 index 000000000000..5329dc140b1c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/google,chv3-codec.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/google,chv3-codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Google Chameleon v3 audio codec + +maintainers: + - Paweł Anikiel <pan@semihalf.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: google,chv3-codec + + "#sound-dai-cells": + const: 0 + +required: + - compatible + +additionalProperties: false + +examples: + - | + audio-codec { + compatible = "google,chv3-codec"; + }; diff --git a/Documentation/devicetree/bindings/sound/google,chv3-i2s.yaml b/Documentation/devicetree/bindings/sound/google,chv3-i2s.yaml new file mode 100644 index 000000000000..3ce910f44d39 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/google,chv3-i2s.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/google,chv3-i2s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Google Chameleon v3 I2S device + +maintainers: + - Paweł Anikiel <pan@semihalf.com> + +description: | + I2S device for the Google Chameleon v3. The device handles both RX + and TX using a producer/consumer ring buffer design. + +properties: + compatible: + const: google,chv3-i2s + + reg: + items: + - description: core registers + - description: irq registers + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2s@c0060300 { + compatible = "google,chv3-i2s"; + reg = <0xc0060300 0x100>, + <0xc0060f00 0x10>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml index 67ccddd44489..666a95ac22c8 100644 --- a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml +++ b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml @@ -74,7 +74,8 @@ patternProperties: properties: sound-dai: - maxItems: 1 + minItems: 1 + maxItems: 4 required: - link-name diff --git a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml index c59a7cd9eaa9..d15c000f14e1 100644 --- a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml +++ b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml @@ -23,6 +23,7 @@ properties: - ingenic,jz4760-i2s - ingenic,jz4770-i2s - ingenic,jz4780-i2s + - ingenic,x1000-i2s - items: - const: ingenic,jz4725b-i2s - const: ingenic,jz4740-i2s diff --git a/Documentation/devicetree/bindings/sound/loongson,ls-audio-card.yaml b/Documentation/devicetree/bindings/sound/loongson,ls-audio-card.yaml new file mode 100644 index 000000000000..61e8babed402 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/loongson,ls-audio-card.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/loongson,ls-audio-card.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson 7axxx/2kxxx ASoC audio sound card driver + +maintainers: + - Yingkun Meng <mengyingkun@loongson.cn> + +description: + The binding describes the sound card present in loongson + 7axxx/2kxxx platform. The sound card is an ASoC component + which uses Loongson I2S controller to transfer the audio data. + +properties: + compatible: + const: loongson,ls-audio-card + + model: + $ref: /schemas/types.yaml#/definitions/string + description: User specified audio sound card name + + mclk-fs: + $ref: simple-card.yaml#/definitions/mclk-fs + + cpu: + description: Holds subnode which indicates cpu dai. + type: object + additionalProperties: false + properties: + sound-dai: + maxItems: 1 + required: + - sound-dai + + codec: + description: Holds subnode which indicates codec dai. + type: object + additionalProperties: false + properties: + sound-dai: + maxItems: 1 + required: + - sound-dai + +required: + - compatible + - model + - mclk-fs + - cpu + - codec + +additionalProperties: false + +examples: + - | + sound { + compatible = "loongson,ls-audio-card"; + model = "loongson-audio"; + mclk-fs = <512>; + + cpu { + sound-dai = <&i2s>; + }; + codec { + sound-dai = <&es8323>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml index 82ccb32f08f2..e6cb711ece77 100644 --- a/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml @@ -29,6 +29,10 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of the mediatek topckgen controller + mediatek,infracfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the mediatek infracfg controller + power-domains: maxItems: 1 @@ -52,6 +56,11 @@ properties: - description: mux for i2si1_mck - description: mux for i2si2_mck - description: audio 26m clock + - description: audio pll1 divide 4 + - description: audio pll2 divide 4 + - description: clock divider for iec + - description: mux for a2sys clock + - description: mux for aud_iec clock-names: items: @@ -63,16 +72,21 @@ properties: - const: apll12_div2 - const: apll12_div3 - const: apll12_div9 - - const: a1sys_hp_sel - - const: aud_intbus_sel - - const: audio_h_sel - - const: audio_local_bus_sel - - const: dptx_m_sel - - const: i2so1_m_sel - - const: i2so2_m_sel - - const: i2si1_m_sel - - const: i2si2_m_sel + - const: top_a1sys_hp + - const: top_aud_intbus + - const: top_audio_h + - const: top_audio_local_bus + - const: top_dptx + - const: top_i2so1 + - const: top_i2so2 + - const: top_i2si1 + - const: top_i2si2 - const: adsp_audio_26m + - const: apll1_d4 + - const: apll2_d4 + - const: apll12_div4 + - const: top_a2sys + - const: top_aud_iec mediatek,etdm-in1-cowork-source: $ref: /schemas/types.yaml#/definitions/uint32 @@ -144,6 +158,7 @@ required: - resets - reset-names - mediatek,topckgen + - mediatek,infracfg - power-domains - clocks - clock-names @@ -162,6 +177,7 @@ examples: resets = <&watchdog 14>; reset-names = "audiosys"; mediatek,topckgen = <&topckgen>; + mediatek,infracfg = <&infracfg_ao>; power-domains = <&spm 13>; //MT8188_POWER_DOMAIN_AUDIO mediatek,etdm-in2-cowork-source = <2>; mediatek,etdm-out2-cowork-source = <0>; @@ -184,7 +200,12 @@ examples: <&topckgen 78>, //CLK_TOP_I2SO2 <&topckgen 79>, //CLK_TOP_I2SI1 <&topckgen 80>, //CLK_TOP_I2SI2 - <&adsp_audio26m 0>; //CLK_AUDIODSP_AUDIO26M + <&adsp_audio26m 0>, //CLK_AUDIODSP_AUDIO26M + <&topckgen 132>, //CLK_TOP_APLL1_D4 + <&topckgen 133>, //CLK_TOP_APLL2_D4 + <&topckgen 183>, //CLK_TOP_APLL12_CK_DIV4 + <&topckgen 84>, //CLK_TOP_A2SYS + <&topckgen 82>; //CLK_TOP_AUD_IEC>; clock-names = "clk26m", "apll1", "apll2", @@ -193,16 +214,21 @@ examples: "apll12_div2", "apll12_div3", "apll12_div9", - "a1sys_hp_sel", - "aud_intbus_sel", - "audio_h_sel", - "audio_local_bus_sel", - "dptx_m_sel", - "i2so1_m_sel", - "i2so2_m_sel", - "i2si1_m_sel", - "i2si2_m_sel", - "adsp_audio_26m"; + "top_a1sys_hp", + "top_aud_intbus", + "top_audio_h", + "top_audio_local_bus", + "top_dptx", + "top_i2so1", + "top_i2so2", + "top_i2si1", + "top_i2si2", + "adsp_audio_26m", + "apll1_d4", + "apll2_d4", + "apll12_div4", + "top_a2sys", + "top_aud_iec"; }; ... diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml index 6640272b3f4f..05e532b5d50a 100644 --- a/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml @@ -11,7 +11,9 @@ maintainers: properties: compatible: - const: mediatek,mt8188-mt6359-evb + enum: + - mediatek,mt8188-mt6359-evb + - mediatek,mt8188-nau8825 model: $ref: /schemas/types.yaml#/definitions/string @@ -42,7 +44,6 @@ patternProperties: we are going to update parameters in this node. items: enum: - - ADDA_BE - DPTX_BE - ETDM1_IN_BE - ETDM2_IN_BE @@ -62,11 +63,28 @@ patternProperties: required: - sound-dai + dai-format: + description: audio format. + items: + enum: + - i2s + - right_j + - left_j + - dsp_a + - dsp_b + + mediatek,clk-provider: + $ref: /schemas/types.yaml#/definitions/string + description: Indicates dai-link clock master. + items: + enum: + - cpu + - codec + additionalProperties: false required: - link-name - - codec additionalProperties: false @@ -87,7 +105,8 @@ examples: "AIN1", "Headset Mic"; dai-link-0 { link-name = "ETDM3_OUT_BE"; - + dai-format = "i2s"; + mediatek,clk-provider = "cpu"; codec { sound-dai = <&hdmi0>; }; diff --git a/Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml b/Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml index 9b40268537cb..9aa65c975c4e 100644 --- a/Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml +++ b/Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml @@ -56,13 +56,9 @@ properties: items: items: - description: value for DS line + enum: [0, 1] - description: value for sampling edge - anyOf: - - enum: - - [0, 0] - - [0, 1] - - [1, 0] - - [1, 1] + enum: [0, 1] minItems: 1 maxItems: 4 uniqueItems: true diff --git a/Documentation/devicetree/bindings/sound/nau8315.txt b/Documentation/devicetree/bindings/sound/nau8315.txt deleted file mode 100644 index 1cd94517d45e..000000000000 --- a/Documentation/devicetree/bindings/sound/nau8315.txt +++ /dev/null @@ -1,24 +0,0 @@ -Nuvoton NAU8315 Mono Class-D Amplifier - -Required properties: -- compatible : "nuvoton,nau8315" - "nuvoton,nau8318" - -Optional properties: -- enable-gpios : GPIO specifier for the chip's device enable input(EN) pin. - If this option is not specified then driver does not manage - the pin state (e.g. chip is always on). - -Example: - -#include <dt-bindings/gpio/gpio.h> - -nau8315 { - compatible = "nuvoton,nau8315"; - enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; -}; - -nau8318 { - compatible = "nuvoton,nau8318"; - enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; -}; diff --git a/Documentation/devicetree/bindings/sound/nau8540.txt b/Documentation/devicetree/bindings/sound/nau8540.txt deleted file mode 100644 index 307a76528320..000000000000 --- a/Documentation/devicetree/bindings/sound/nau8540.txt +++ /dev/null @@ -1,16 +0,0 @@ -NAU85L40 audio CODEC - -This device supports I2C only. - -Required properties: - - - compatible : "nuvoton,nau8540" - - - reg : the I2C address of the device. - -Example: - -codec: nau8540@1c { - compatible = "nuvoton,nau8540"; - reg = <0x1c>; -}; diff --git a/Documentation/devicetree/bindings/sound/nau8810.txt b/Documentation/devicetree/bindings/sound/nau8810.txt deleted file mode 100644 index 7deaa452b200..000000000000 --- a/Documentation/devicetree/bindings/sound/nau8810.txt +++ /dev/null @@ -1,17 +0,0 @@ -NAU8810/NAU8812/NAU8814 audio CODEC - -This device supports I2C only. - -Required properties: - - - compatible : One of "nuvoton,nau8810" or "nuvoton,nau8812" or - "nuvoton,nau8814" - - - reg : the I2C address of the device. - -Example: - -codec: nau8810@1a { - compatible = "nuvoton,nau8810"; - reg = <0x1a>; -}; diff --git a/Documentation/devicetree/bindings/sound/nau8824.txt b/Documentation/devicetree/bindings/sound/nau8824.txt deleted file mode 100644 index e0058b97e49a..000000000000 --- a/Documentation/devicetree/bindings/sound/nau8824.txt +++ /dev/null @@ -1,88 +0,0 @@ -Nuvoton NAU8824 audio codec - -This device supports I2C only. - -Required properties: - - compatible : Must be "nuvoton,nau8824" - - - reg : the I2C address of the device. This is either 0x1a (CSB=0) or 0x1b (CSB=1). - -Optional properties: - - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low. - - - nuvoton,vref-impedance: VREF Impedance selection - 0 - Open - 1 - 25 kOhm - 2 - 125 kOhm - 3 - 2.5 kOhm - - - nuvoton,micbias-voltage: Micbias voltage level. - 0 - VDDA - 1 - VDDA - 2 - VDDA * 1.1 - 3 - VDDA * 1.2 - 4 - VDDA * 1.3 - 5 - VDDA * 1.4 - 6 - VDDA * 1.53 - 7 - VDDA * 1.53 - - - nuvoton,sar-threshold-num: Number of buttons supported - - nuvoton,sar-threshold: Impedance threshold for each button. Array that contains up to 8 buttons configuration. SAR value is calculated as - SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R) - where MICBIAS is configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by 'nuvoton,sar-voltage', R - button impedance. - Refer datasheet section 10.2 for more information about threshold calculation. - - - nuvoton,sar-hysteresis: Button impedance measurement hysteresis. - - - nuvoton,sar-voltage: Reference voltage for button impedance measurement. - 0 - VDDA - 1 - VDDA - 2 - VDDA * 1.1 - 3 - VDDA * 1.2 - 4 - VDDA * 1.3 - 5 - VDDA * 1.4 - 6 - VDDA * 1.53 - 7 - VDDA * 1.53 - - - nuvoton,sar-compare-time: SAR compare time - 0 - 500 ns - 1 - 1 us - 2 - 2 us - 3 - 4 us - - - nuvoton,sar-sampling-time: SAR sampling time - 0 - 2 us - 1 - 4 us - 2 - 8 us - 3 - 16 us - - - nuvoton,short-key-debounce: Button short key press debounce time. - 0 - 30 ms - 1 - 50 ms - 2 - 100 ms - - - nuvoton,jack-eject-debounce: Jack ejection debounce time. - 0 - 0 ms - 1 - 1 ms - 2 - 10 ms - - -Example: - - headset: nau8824@1a { - compatible = "nuvoton,nau8824"; - reg = <0x1a>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(E, 6) IRQ_TYPE_LEVEL_LOW>; - nuvoton,vref-impedance = <2>; - nuvoton,micbias-voltage = <6>; - // Setup 4 buttons impedance according to Android specification - nuvoton,sar-threshold-num = <4>; - nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>; - nuvoton,sar-hysteresis = <0>; - nuvoton,sar-voltage = <6>; - nuvoton,sar-compare-time = <1>; - nuvoton,sar-sampling-time = <1>; - nuvoton,short-key-debounce = <0>; - nuvoton,jack-eject-debounce = <1>; - }; diff --git a/Documentation/devicetree/bindings/sound/nau8825.txt b/Documentation/devicetree/bindings/sound/nau8825.txt deleted file mode 100644 index a9c34526f4cb..000000000000 --- a/Documentation/devicetree/bindings/sound/nau8825.txt +++ /dev/null @@ -1,111 +0,0 @@ -Nuvoton NAU8825 audio codec - -This device supports I2C only. - -Required properties: - - compatible : Must be "nuvoton,nau8825" - - - reg : the I2C address of the device. This is either 0x1a (CSB=0) or 0x1b (CSB=1). - -Optional properties: - - nuvoton,jkdet-enable: Enable jack detection via JKDET pin. - - nuvoton,jkdet-pull-enable: Enable JKDET pin pull. If set - pin pull enabled, - otherwise pin in high impedance state. - - nuvoton,jkdet-pull-up: Pull-up JKDET pin. If set then JKDET pin is pull up, otherwise pull down. - - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low. - - - nuvoton,vref-impedance: VREF Impedance selection - 0 - Open - 1 - 25 kOhm - 2 - 125 kOhm - 3 - 2.5 kOhm - - - nuvoton,micbias-voltage: Micbias voltage level. - 0 - VDDA - 1 - VDDA - 2 - VDDA * 1.1 - 3 - VDDA * 1.2 - 4 - VDDA * 1.3 - 5 - VDDA * 1.4 - 6 - VDDA * 1.53 - 7 - VDDA * 1.53 - - - nuvoton,sar-threshold-num: Number of buttons supported - - nuvoton,sar-threshold: Impedance threshold for each button. Array that contains up to 8 buttons configuration. SAR value is calculated as - SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R) - where MICBIAS is configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by 'nuvoton,sar-voltage', R - button impedance. - Refer datasheet section 10.2 for more information about threshold calculation. - - - nuvoton,sar-hysteresis: Button impedance measurement hysteresis. - - - nuvoton,sar-voltage: Reference voltage for button impedance measurement. - 0 - VDDA - 1 - VDDA - 2 - VDDA * 1.1 - 3 - VDDA * 1.2 - 4 - VDDA * 1.3 - 5 - VDDA * 1.4 - 6 - VDDA * 1.53 - 7 - VDDA * 1.53 - - - nuvoton,sar-compare-time: SAR compare time - 0 - 500 ns - 1 - 1 us - 2 - 2 us - 3 - 4 us - - - nuvoton,sar-sampling-time: SAR sampling time - 0 - 2 us - 1 - 4 us - 2 - 8 us - 3 - 16 us - - - nuvoton,short-key-debounce: Button short key press debounce time. - 0 - 30 ms - 1 - 50 ms - 2 - 100 ms - 3 - 30 ms - - - nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms - - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms - - - nuvoton,crosstalk-enable: make crosstalk function enable if set. - - - nuvoton,adcout-drive-strong: make the drive strength of ADCOUT IO PIN strong if set. - Otherwise, the drive keeps normal strength. - - - nuvoton,adc-delay-ms: Delay (in ms) to make input path stable and avoid pop noise. The - default value is 125 and range between 125 to 500 ms. - - - clocks: list of phandle and clock specifier pairs according to common clock bindings for the - clocks described in clock-names - - clock-names: should include "mclk" for the MCLK master clock - -Example: - - headset: nau8825@1a { - compatible = "nuvoton,nau8825"; - reg = <0x1a>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(E, 6) IRQ_TYPE_LEVEL_LOW>; - nuvoton,jkdet-enable; - nuvoton,jkdet-pull-enable; - nuvoton,jkdet-pull-up; - nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>; - nuvoton,vref-impedance = <2>; - nuvoton,micbias-voltage = <6>; - // Setup 4 buttons impedance according to Android specification - nuvoton,sar-threshold-num = <4>; - nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>; - nuvoton,sar-hysteresis = <1>; - nuvoton,sar-voltage = <0>; - nuvoton,sar-compare-time = <0>; - nuvoton,sar-sampling-time = <0>; - nuvoton,short-key-debounce = <2>; - nuvoton,jack-insert-debounce = <7>; - nuvoton,jack-eject-debounce = <7>; - nuvoton,crosstalk-enable; - - clock-names = "mclk"; - clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_2>; - }; diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8315.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8315.yaml new file mode 100644 index 000000000000..24006e9dc501 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8315.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nuvoton,nau8315.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NAU8315/NAU8318 Mono Class-D Amplifier + +maintainers: + - David Lin <CTLIN0@nuvoton.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - nuvoton,nau8315 + - nuvoton,nau8318 + + '#sound-dai-cells': + const: 0 + + enable-gpios: + maxItems: 1 + description: + GPIO specifier for the chip's device enable input(EN) pin. + If this option is not specified then driver does not manage + the pin state (e.g. chip is always on). + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + codec { + compatible = "nuvoton,nau8315"; + #sound-dai-cells = <0>; + enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml new file mode 100644 index 000000000000..7ccfbb8d8b04 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nuvoton,nau8540.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton Technology Corporation NAU85L40 Audio CODEC + +maintainers: + - John Hsu <KCHSU0@nuvoton.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: nuvoton,nau8540 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1c { + compatible = "nuvoton,nau8540"; + reg = <0x1c>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml new file mode 100644 index 000000000000..d9696f6c75ed --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nuvoton,nau8810.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NAU8810/NAU8812/NAU8814 audio CODEC + +maintainers: + - David Lin <CTLIN0@nuvoton.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - nuvoton,nau8810 + - nuvoton,nau8812 + - nuvoton,nau8814 + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@1a { + #sound-dai-cells = <0>; + compatible = "nuvoton,nau8810"; + reg = <0x1a>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml new file mode 100644 index 000000000000..3dbf438c3841 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml @@ -0,0 +1,182 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nuvoton,nau8824.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NAU8824 audio CODEC + +maintainers: + - John Hsu <KCHSU0@nuvoton.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - nuvoton,nau8824 + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + + interrupts: + maxItems: 1 + + nuvoton,jkdet-polarity: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + JKDET pin polarity. + enum: + - 0 # active high + - 1 # active low + default: 1 + + nuvoton,vref-impedance: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + VREF Impedance selection. + enum: + - 0 # Open + - 1 # 25 kOhm + - 2 # 125 kOhm + - 3 # 2.5 kOhm + default: 2 + + nuvoton,micbias-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Micbias voltage level. + enum: + - 0 # VDDA + - 1 # VDDA + - 2 # VDDA * 1.1 + - 3 # VDDA * 1.2 + - 4 # VDDA * 1.3 + - 5 # VDDA * 1.4 + - 6 # VDDA * 1.53 + - 7 # VDDA * 1.53 + default: 6 + + nuvoton,sar-threshold-num: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of buttons supported. + minimum: 1 + maximum: 8 + default: 4 + + nuvoton,sar-threshold: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Impedance threshold for each button. Array that contains up to 8 buttons + configuration. SAR value is calculated as + SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R) where MICBIAS is + configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by + 'nuvoton,sar-voltage', R - button impedance. + Refer datasheet section 10.2 for more information about threshold + calculation. + minItems: 1 + maxItems: 8 + items: + minimum: 0 + maximum: 255 + + nuvoton,sar-hysteresis: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Button impedance measurement hysteresis. + default: 0 + + nuvoton,sar-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Reference voltage for button impedance measurement. + enum: + - 0 # VDDA + - 1 # VDDA + - 2 # VDDA * 1.1 + - 3 # VDDA * 1.2 + - 4 # VDDA * 1.3 + - 5 # VDDA * 1.4 + - 6 # VDDA * 1.53 + - 7 # VDDA * 1.53 + default: 6 + + nuvoton,sar-compare-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + SAR compare time. + enum: + - 0 # 500ns + - 1 # 1us + - 2 # 2us + - 3 # 4us + default: 1 + + nuvoton,sar-sampling-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + SAR sampling time. + enum: + - 0 # 2us + - 1 # 4us + - 2 # 8us + - 3 # 16us + default: 1 + + nuvoton,short-key-debounce: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Button short key press debounce time. + enum: + - 0 # 30 ms + - 1 # 50 ms + - 2 # 100 ms + default: 0 + + nuvoton,jack-eject-debounce: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Jack ejection debounce time. + enum: + - 0 # 0 ms + - 1 # 1 ms + - 2 # 10 ms + default: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1a { + #sound-dai-cells = <0>; + compatible = "nuvoton,nau8824"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; + nuvoton,vref-impedance = <2>; + nuvoton,micbias-voltage = <6>; + nuvoton,sar-threshold-num = <4>; + // Setup 4 buttons impedance according to Android specification + nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>; + nuvoton,sar-hysteresis = <0>; + nuvoton,sar-voltage = <6>; + nuvoton,sar-compare-time = <1>; + nuvoton,sar-sampling-time = <1>; + nuvoton,short-key-debounce = <0>; + nuvoton,jack-eject-debounce = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8825.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8825.yaml new file mode 100644 index 000000000000..a54f194a0b49 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8825.yaml @@ -0,0 +1,239 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nuvoton,nau8825.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NAU8825 audio CODEC + +maintainers: + - John Hsu <KCHSU0@nuvoton.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - nuvoton,nau8825 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + nuvoton,jkdet-enable: + description: + Enable jack detection via JKDET pin. + type: boolean + + nuvoton,jkdet-pull-enable: + description: + Enable JKDET pin pull. + If set - pin pull enabled, otherwise pin in high impedance state. + type: boolean + + nuvoton,jkdet-pull-up: + description: + Pull-up JKDET pin. + If set then JKDET pin is pull up, otherwise pull down. + type: boolean + + nuvoton,jkdet-polarity: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + JKDET pin polarity. + enum: + - 0 # active high + - 1 # active low + default: 1 + + nuvoton,vref-impedance: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + VREF Impedance selection. + enum: + - 0 # Open + - 1 # 25 kOhm + - 2 # 125 kOhm + - 3 # 2.5 kOhm + default: 2 + + nuvoton,micbias-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Micbias voltage level. + enum: + - 0 # VDDA + - 1 # VDDA + - 2 # VDDA * 1.1 + - 3 # VDDA * 1.2 + - 4 # VDDA * 1.3 + - 5 # VDDA * 1.4 + - 6 # VDDA * 1.53 + - 7 # VDDA * 1.53 + default: 6 + + nuvoton,sar-threshold-num: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of buttons supported. + minimum: 1 + maximum: 4 + default: 4 + + nuvoton,sar-threshold: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Impedance threshold for each button. Array that contains up to 8 buttons + configuration. SAR value is calculated as + SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R) where MICBIAS is + configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by + 'nuvoton,sar-voltage', R - button impedance. + Refer datasheet section 10.2 for more information about threshold + calculation. + minItems: 1 + maxItems: 4 + items: + minimum: 0 + maximum: 255 + + nuvoton,sar-hysteresis: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Button impedance measurement hysteresis. + default: 0 + + nuvoton,sar-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Reference voltage for button impedance measurement. + enum: + - 0 # VDDA + - 1 # VDDA + - 2 # VDDA * 1.1 + - 3 # VDDA * 1.2 + - 4 # VDDA * 1.3 + - 5 # VDDA * 1.4 + - 6 # VDDA * 1.53 + - 7 # VDDA * 1.53 + default: 6 + + nuvoton,sar-compare-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + SAR compare time. + enum: + - 0 # 500 ns + - 1 # 1 us + - 2 # 2 us + - 3 # 4 us + default: 1 + + nuvoton,sar-sampling-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + SAR sampling time. + enum: + - 0 # 2 us + - 1 # 4 us + - 2 # 8 us + - 3 # 16 us + default: 1 + + nuvoton,short-key-debounce: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Button short key press debounce time. + enum: + - 0 # 30 ms + - 1 # 50 ms + - 2 # 100 ms + - 3 # 30 ms + default: 3 + + nuvoton,jack-insert-debounce: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + number from 0 to 7 that sets debounce time to 2^(n+2) ms. + maximum: 7 + default: 7 + + nuvoton,jack-eject-debounce: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + number from 0 to 7 that sets debounce time to 2^(n+2) ms + maximum: 7 + default: 0 + + nuvoton,crosstalk-enable: + description: + make crosstalk function enable if set. + type: boolean + + nuvoton,adcout-drive-strong: + description: + make the drive strength of ADCOUT IO PIN strong if set. + Otherwise, the drive keeps normal strength. + type: boolean + + nuvoton,adc-delay-ms: + description: + Delay (in ms) to make input path stable and avoid pop noise. + The default value is 125 and range between 125 to 500 ms. + minimum: 125 + maximum: 500 + default: 125 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: mclk + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1a { + #sound-dai-cells = <0>; + compatible = "nuvoton,nau8825"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; + nuvoton,jkdet-enable; + nuvoton,jkdet-pull-enable; + nuvoton,jkdet-pull-up; + nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>; + nuvoton,vref-impedance = <2>; + nuvoton,micbias-voltage = <6>; + // Setup 4 buttons impedance according to Android specification + nuvoton,sar-threshold-num = <4>; + nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>; + nuvoton,sar-hysteresis = <1>; + nuvoton,sar-voltage = <0>; + nuvoton,sar-compare-time = <0>; + nuvoton,sar-sampling-time = <0>; + nuvoton,short-key-debounce = <2>; + nuvoton,jack-insert-debounce = <7>; + nuvoton,jack-eject-debounce = <7>; + nuvoton,crosstalk-enable; + + clock-names = "mclk"; + clocks = <&tegra_pmc 1>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml index 7c1e9895ce85..2588589ad62d 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/nvidia,tegra-audio-common.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Common properties for NVIDIA Tegra audio complexes diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml index cdbb4096fa44..9e5b30d9c6e6 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/qcom,q6apm-dai.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/qcom,q6apm-dai.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Audio Process Manager Digital Audio Interfaces diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml index 1168410f6fbd..3552c44137ed 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-clocks.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-clocks.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm DSP LPASS Clock Controller diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml index 044e77718a1b..08c618e7e428 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-ports.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-ports.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm DSP LPASS(Low Power Audio SubSystem) Audio Ports diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml new file mode 100644 index 000000000000..e6723c9e312a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,wsa8840.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm WSA8840/WSA8845/WSA8845H smart speaker amplifier + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + WSA884X is a family of Qualcomm Aqstic smart speaker amplifiers using + SoundWire digital audio interface. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: sdw20217020400 + + reg: + maxItems: 1 + + powerdown-gpios: + description: Powerdown/Shutdown line to use (pin SD_N) + maxItems: 1 + + '#sound-dai-cells': + const: 0 + + vdd-1p8-supply: true + vdd-io-supply: true + +required: + - compatible + - reg + - powerdown-gpios + - '#sound-dai-cells' + - vdd-1p8-supply + - vdd-io-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + soundwire-controller { + #address-cells = <2>; + #size-cells = <0>; + + speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_2_sd_n_active>; + powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3g_1p2>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/realtek,rt1016.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1016.yaml new file mode 100644 index 000000000000..5287e9c9197e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/realtek,rt1016.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/realtek,rt1016.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Reaktek RT1016 Stereo Class D Audio Amplifier + +maintainers: + - oder_chiou@realtek.com + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: realtek,rt1016 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1a { + compatible = "realtek,rt1016"; + reg = <0x1a>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/rt1016.txt b/Documentation/devicetree/bindings/sound/rt1016.txt deleted file mode 100644 index 2310f8ff259b..000000000000 --- a/Documentation/devicetree/bindings/sound/rt1016.txt +++ /dev/null @@ -1,17 +0,0 @@ -RT1016 Stereo Class D Audio Amplifier - -This device supports I2C only. - -Required properties: - -- compatible : "realtek,rt1016". - -- reg : The I2C address of the device. - - -Example: - -rt1016: codec@1a { - compatible = "realtek,rt1016"; - reg = <0x1a>; -}; diff --git a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml index 56e623d4e168..a970fd264b21 100644 --- a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml @@ -36,7 +36,8 @@ properties: const: i2sclk resets: - maxItems: 1 + items: + - description: Optional controller resets dmas: items: diff --git a/Documentation/devicetree/bindings/sound/ssm2518.txt b/Documentation/devicetree/bindings/sound/ssm2518.txt deleted file mode 100644 index 59381a778c79..000000000000 --- a/Documentation/devicetree/bindings/sound/ssm2518.txt +++ /dev/null @@ -1,20 +0,0 @@ -SSM2518 audio amplifier - -This device supports I2C only. - -Required properties: - - compatible : Must be "adi,ssm2518" - - reg : the I2C address of the device. This will either be 0x34 (ADDR pin low) - or 0x35 (ADDR pin high) - -Optional properties: - - gpios : GPIO connected to the nSD pin. If the property is not present it is - assumed that the nSD pin is hardwired to always on. - -Example: - - ssm2518: ssm2518@34 { - compatible = "adi,ssm2518"; - reg = <0x34>; - gpios = <&gpio 5 0>; - }; diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml index a040d4d31412..b9111d375b93 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml @@ -61,6 +61,10 @@ properties: description: Configure the I2S device as MCLK clock provider. const: 0 + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + required: - compatible - "#sound-dai-cells" @@ -89,6 +93,13 @@ examples: dma-names = "rx", "tx"; pinctrl-names = "default"; pinctrl-0 = <&i2s2_pins_a>; + + /* assume audio-graph */ + port { + codec_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + }; + }; }; ... diff --git a/Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml b/Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml new file mode 100644 index 000000000000..abb373fbfa26 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/starfive,jh7110-tdm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 TDM Controller + +description: | + The TDM Controller is a Time Division Multiplexed audio interface + integrated in StarFive JH7110 SoC, allowing up to 8 channels of + audio over a serial interface. The TDM controller can operate both + in master and slave mode. + +maintainers: + - Walker Chen <walker.chen@starfivetech.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - starfive,jh7110-tdm + + reg: + maxItems: 1 + + clocks: + items: + - description: TDM AHB Clock + - description: TDM APB Clock + - description: TDM Internal Clock + - description: TDM Clock + - description: Inner MCLK + - description: TDM External Clock + + clock-names: + items: + - const: tdm_ahb + - const: tdm_apb + - const: tdm_internal + - const: tdm + - const: mclk_inner + - const: tdm_ext + + resets: + items: + - description: tdm ahb reset line + - description: tdm apb reset line + - description: tdm core reset line + + dmas: + items: + - description: RX DMA Channel + - description: TX DMA Channel + + dma-names: + items: + - const: rx + - const: tx + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - dmas + - dma-names + - "#sound-dai-cells" + +additionalProperties: false + +examples: + - | + tdm@10090000 { + compatible = "starfive,jh7110-tdm"; + reg = <0x10090000 0x1000>; + clocks = <&syscrg 184>, + <&syscrg 185>, + <&syscrg 186>, + <&syscrg 187>, + <&syscrg 17>, + <&tdm_ext>; + clock-names = "tdm_ahb", "tdm_apb", + "tdm_internal", "tdm", + "mclk_inner", "tdm_ext"; + resets = <&syscrg 105>, + <&syscrg 107>, + <&syscrg 106>; + dmas = <&dma 20>, <&dma 21>; + dma-names = "rx","tx"; + #sound-dai-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml index a5bb561bfcfb..f01c0dde0cf7 100644 --- a/Documentation/devicetree/bindings/sound/tas2562.yaml +++ b/Documentation/devicetree/bindings/sound/tas2562.yaml @@ -2,8 +2,8 @@ # Copyright (C) 2019 Texas Instruments Incorporated %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/tas2562.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/tas2562.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments TAS2562 Smart PA @@ -55,7 +55,9 @@ properties: description: TDM TX current sense time slot. '#sound-dai-cells': - const: 1 + # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward + # compatibility but is deprecated. + enum: [0, 1] required: - compatible @@ -72,7 +74,7 @@ examples: codec: codec@4c { compatible = "ti,tas2562"; reg = <0x4c>; - #sound-dai-cells = <1>; + #sound-dai-cells = <0>; interrupt-parent = <&gpio1>; interrupts = <14>; shutdown-gpios = <&gpio1 15 0>; diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml index 26088adb9dc2..be2536e8c440 100644 --- a/Documentation/devicetree/bindings/sound/tas2770.yaml +++ b/Documentation/devicetree/bindings/sound/tas2770.yaml @@ -2,8 +2,8 @@ # Copyright (C) 2019-20 Texas Instruments Incorporated %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/tas2770.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/tas2770.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments TAS2770 Smart PA @@ -57,7 +57,9 @@ properties: - 1 # Falling edge '#sound-dai-cells': - const: 1 + # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward + # compatibility but is deprecated. + enum: [0, 1] required: - compatible @@ -74,7 +76,7 @@ examples: codec: codec@41 { compatible = "ti,tas2770"; reg = <0x41>; - #sound-dai-cells = <1>; + #sound-dai-cells = <0>; interrupt-parent = <&gpio1>; interrupts = <14>; reset-gpio = <&gpio1 15 0>; diff --git a/Documentation/devicetree/bindings/sound/tas27xx.yaml b/Documentation/devicetree/bindings/sound/tas27xx.yaml index 8cba01316855..f2d878f6f495 100644 --- a/Documentation/devicetree/bindings/sound/tas27xx.yaml +++ b/Documentation/devicetree/bindings/sound/tas27xx.yaml @@ -2,8 +2,8 @@ # Copyright (C) 2020-2022 Texas Instruments Incorporated %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/tas27xx.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/tas27xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments TAS2764/TAS2780 Smart PA @@ -50,7 +50,9 @@ properties: description: TDM TX voltage sense time slot. '#sound-dai-cells': - const: 1 + # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward + # compatibility but is deprecated. + enum: [0, 1] required: - compatible @@ -67,7 +69,7 @@ examples: codec: codec@38 { compatible = "ti,tas2764"; reg = <0x38>; - #sound-dai-cells = <1>; + #sound-dai-cells = <0>; interrupt-parent = <&gpio1>; interrupts = <14>; reset-gpios = <&gpio1 15 0>; diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml new file mode 100644 index 000000000000..8d60e4e236d6 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 - 2023 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,tas2781.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TAS2781 SmartAMP + +maintainers: + - Shenghao Ding <shenghao-ding@ti.com> + +description: + The TAS2781 is a mono, digital input Class-D audio amplifier + optimized for efficiently driving high peak power into small + loudspeakers. An integrated on-chip DSP supports Texas Instruments + Smart Amp speaker protection algorithm. The integrated speaker + voltage and current sense provides for real time + monitoring of loudspeaker behavior. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - ti,tas2781 + + reg: + description: + I2C address, in multiple tas2781s case, all the i2c address + aggreate as one Audio Device to support multiple audio slots. + maxItems: 8 + minItems: 1 + items: + minimum: 0x38 + maximum: 0x3f + + reset-gpios: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + /* example with quad tas2781s, such as tablet or pad device */ + #address-cells = <1>; + #size-cells = <0>; + quad_tas2781: tas2781@38 { + compatible = "ti,tas2781"; + reg = <0x38>, /* Audio slot 0 */ + <0x3a>, /* Audio slot 1 */ + <0x39>, /* Audio slot 2 */ + <0x3b>; /* Audio slot 3 */ + + #sound-dai-cells = <0>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio1>; + interrupts = <15>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml new file mode 100644 index 000000000000..a7cc9aa34468 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,tlv320aic32x4.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TLV320AIC32x4 Stereo Audio codec + +maintainers: + - Alexander Stein <alexander.stein@ew.tq-group.com> + +description: | + The TLV320AIC32x4 audio codec can be accessed using I2C or SPI + +properties: + compatible: + enum: + - ti,tas2505 + - ti,tlv320aic32x4 + - ti,tlv320aic32x6 + + reg: + maxItems: 1 + + clocks: + items: + - description: Master clock + + clock-names: + items: + - const: mclk + + av-supply: + description: Analog core power supply + + dv-supply: + description: Digital core power supply + + iov-supply: + description: Digital IO power supply + + ldoin-supply: + description: LDO power supply + + reset-gpios: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + + aic32x4-gpio-func: + description: | + GPIO function configuration for pins MFP1-MFP5. + Types are defined in include/sound/tlv320aic32x4.h + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 5 + maxItems: 5 + +required: + - compatible + - reg + - clocks + - clock-names + - iov-supply + +allOf: + - $ref: dai-common.yaml# + - if: + not: + required: + - ldoin-supply + then: + required: + - av-supply + - dv-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + iov-supply = <®_3v3>; + ldoin-supply = <®_3v3>; + clocks = <&clks 201>; + clock-names = "mclk"; + aic32x4-gpio-func= < + 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */ + 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */ + 0x04 /* MFP3 AIC32X4_MFP3_GPIO_ENABLED */ + 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */ + 0x08 /* MFP5 AIC32X4_MFP5_GPIO_INPUT */ + >; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml index e8ca9f3369f8..206f6d61e362 100644 --- a/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml @@ -61,6 +61,7 @@ properties: GPIO specification for the active low RESET input. gpio-reset: + $ref: /schemas/types.yaml#/definitions/uint32-matrix maxItems: 1 description: Deprecated, please use reset-gpios instead. diff --git a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt deleted file mode 100644 index f59125bc79d1..000000000000 --- a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt +++ /dev/null @@ -1,42 +0,0 @@ -Texas Instruments - tlv320aic32x4 Codec module - -The tlv320aic32x4 serial control bus communicates through I2C protocols - -Required properties: - - compatible - "string" - One of: - "ti,tlv320aic32x4" TLV320AIC3204 - "ti,tlv320aic32x6" TLV320AIC3206, TLV320AIC3256 - "ti,tas2505" TAS2505, TAS2521 - - reg: I2C slave address - - supply-*: Required supply regulators are: - "iov" - digital IO power supply - "ldoin" - LDO power supply - "dv" - Digital core power supply - "av" - Analog core power supply - If you supply ldoin, dv and av are optional. Otherwise they are required - See regulator/regulator.txt for more information about the detailed binding - format. - -Optional properties: - - reset-gpios: Reset-GPIO phandle with args as described in gpio/gpio.txt - - clocks/clock-names: Clock named 'mclk' for the master clock of the codec. - See clock/clock-bindings.txt for information about the detailed format. - - aic32x4-gpio-func - <array of 5 int> - - Types are defined in include/sound/tlv320aic32x4.h - - -Example: - -codec: tlv320aic32x4@18 { - compatible = "ti,tlv320aic32x4"; - reg = <0x18>; - clocks = <&clks 201>; - clock-names = "mclk"; - aic32x4-gpio-func= < - 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */ - 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */ - 0x04 /* MFP3 AIC32X4_MFP3_GPIO_ENABLED */ - 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */ - 0x08 /* MFP5 AIC32X4_MFP5_GPIO_INPUT */ - >; -}; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml index 7105ed5fd6c7..4cfa66f62681 100644 --- a/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml +++ b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/sound/wlf,wm8903.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/sound/wlf,wm8903.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: WM8903 audio codec diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml index 2155478bfc4d..a6f34bdd1d3c 100644 --- a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml +++ b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml @@ -14,9 +14,6 @@ maintainers: - Maxime Ripard <mripard@kernel.org> properties: - "#address-cells": true - "#size-cells": true - compatible: const: allwinner,sun4i-a10-spi @@ -46,12 +43,9 @@ properties: - const: rx - const: tx - num-cs: true - patternProperties: "^.*@[0-9a-f]+": type: object - additionalProperties: true properties: reg: items: @@ -71,7 +65,7 @@ required: - clocks - clock-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml index de36c6a34a0f..28b8ace63044 100644 --- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml +++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml @@ -14,11 +14,9 @@ maintainers: - Maxime Ripard <mripard@kernel.org> properties: - "#address-cells": true - "#size-cells": true - compatible: oneOf: + - const: allwinner,sun50i-r329-spi - const: allwinner,sun6i-a31-spi - const: allwinner,sun8i-h3-spi - items: @@ -28,6 +26,15 @@ properties: - allwinner,sun50i-h616-spi - allwinner,suniv-f1c100s-spi - const: allwinner,sun8i-h3-spi + - items: + - enum: + - allwinner,sun20i-d1-spi + - allwinner,sun50i-r329-spi-dbi + - const: allwinner,sun50i-r329-spi + - items: + - const: allwinner,sun20i-d1-spi-dbi + - const: allwinner,sun50i-r329-spi-dbi + - const: allwinner,sun50i-r329-spi reg: maxItems: 1 @@ -58,12 +65,9 @@ properties: - const: rx - const: tx - num-cs: true - patternProperties: "^.*@[0-9a-f]+": type: object - additionalProperties: true properties: reg: items: @@ -83,7 +87,7 @@ required: - clocks - clock-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml index 6c57dd6c3a36..58367587bfbc 100644 --- a/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml +++ b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml @@ -20,6 +20,10 @@ properties: - items: - const: microchip,sam9x60-spi - const: atmel,at91rm9200-spi + - items: + - const: microchip,sam9x7-spi + - const: microchip,sam9x60-spi + - const: atmel,at91rm9200-spi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml index b310069762dd..4f15f9a0cc34 100644 --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml @@ -46,12 +46,28 @@ allOf: maxItems: 2 items: enum: [ qspi, qspi-ocp ] + - if: + properties: + compatible: + contains: + const: amd,pensando-elba-qspi + then: + properties: + cdns,fifo-depth: + enum: [ 128, 256, 1024 ] + default: 1024 + else: + properties: + cdns,fifo-depth: + enum: [ 128, 256 ] + default: 128 properties: compatible: oneOf: - items: - enum: + - amd,pensando-elba-qspi - ti,k2g-qspi - ti,am654-ospi - intel,lgm-qspi @@ -76,8 +92,6 @@ properties: description: Size of the data FIFO in words. $ref: /schemas/types.yaml#/definitions/uint32 - enum: [ 128, 256 ] - default: 128 cdns,fifo-width: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml index ee8f7ea907b0..1696ac46a660 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml @@ -29,6 +29,9 @@ properties: reg: maxItems: 1 + iommus: + maxItems: 1 + interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml b/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml new file mode 100644 index 000000000000..e59183e53690 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/renesas,rzv2m-csi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2M Clocked Serial Interface (CSI) + +maintainers: + - Fabrizio Castro <fabrizio.castro.jz@renesas.com> + - Geert Uytterhoeven <geert+renesas@glider.be> + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + const: renesas,rzv2m-csi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: The clock used to generate the output clock (CSICLK) + - description: Internal clock to access the registers (PCLK) + + clock-names: + items: + - const: csiclk + - const: pclk + + resets: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - power-domains + - '#address-cells' + - '#size-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/r9a09g011-cpg.h> + csi4: spi@a4020200 { + compatible = "renesas,rzv2m-csi"; + reg = <0xa4020200 0x80>; + interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A09G011_CSI4_CLK>, + <&cpg CPG_MOD R9A09G011_CPERI_GRPH_PCLK>; + clock-names = "csiclk", "pclk"; + resets = <&cpg R9A09G011_CSI_GPH_PRESETN>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/samsung,spi.yaml b/Documentation/devicetree/bindings/spi/samsung,spi.yaml index e0a465d70b0a..79da99ca0e53 100644 --- a/Documentation/devicetree/bindings/spi/samsung,spi.yaml +++ b/Documentation/devicetree/bindings/spi/samsung,spi.yaml @@ -35,8 +35,6 @@ properties: minItems: 2 maxItems: 3 - cs-gpios: true - dmas: minItems: 2 maxItems: 2 diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml index 12ca108864c6..a47cb144b09f 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@ -74,6 +74,8 @@ properties: const: intel,keembay-ssi - description: Intel Thunder Bay SPI Controller const: intel,thunderbay-ssi + - description: Intel Mount Evans Integrated Management Complex SPI Controller + const: intel,mountevans-imc-ssi - description: AMD Pensando Elba SoC SPI Controller const: amd,pensando-elba-spi - description: Baikal-T1 SPI Controller diff --git a/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml b/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml index 597fc4e6b01c..c96131ebbea1 100644 --- a/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml +++ b/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml @@ -17,9 +17,6 @@ allOf: - $ref: spi-controller.yaml# properties: - "#address-cells": true - "#size-cells": true - compatible: const: socionext,uniphier-scssi diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml index b0f83b5c2cdd..b7552739b554 100644 --- a/Documentation/devicetree/bindings/spi/spi-cadence.yaml +++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Cadence SPI controller maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> allOf: - $ref: spi-controller.yaml# diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 90945f59b7e8..524f6fe8c27b 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -17,7 +17,7 @@ description: | properties: $nodename: - pattern: "^spi(@.*|-[0-9a-f])*$" + pattern: "^spi(@.*|-([0-9]|[1-9][0-9]+))?$" "#address-cells": enum: [0, 1] diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml index 6bd83836eded..4beb3af0416d 100644 --- a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml +++ b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx SPI controller maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> allOf: - $ref: spi-controller.yaml# diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml index 20f77246d365..e5199b109dad 100644 --- a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Zynq UltraScale+ MPSoC GQSPI controller maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> allOf: - $ref: spi-controller.yaml# @@ -32,6 +32,12 @@ properties: clocks: maxItems: 2 + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml index 83e8fb4a548d..7ea8fb42ce2c 100644 --- a/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml @@ -14,7 +14,7 @@ allOf: - $ref: spi-controller.yaml# maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> # Everything else is described in the common file properties: diff --git a/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml b/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml index abcbbe13723f..ac99883a3f29 100644 --- a/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml +++ b/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml @@ -14,13 +14,18 @@ description: |+ for multiple SoCs to control a single SPMI master. allOf: - - $ref: "spmi.yaml" + - $ref: spmi.yaml properties: compatible: - enum: - - mediatek,mt6873-spmi - - mediatek,mt8195-spmi + oneOf: + - enum: + - mediatek,mt6873-spmi + - mediatek,mt8195-spmi + - items: + - enum: + - mediatek,mt8186-spmi + - const: mediatek,mt8195-spmi reg: maxItems: 2 diff --git a/Documentation/devicetree/bindings/sram/qcom,imem.yaml b/Documentation/devicetree/bindings/sram/qcom,imem.yaml index 0548e8e0d30b..8025a852bc9c 100644 --- a/Documentation/devicetree/bindings/sram/qcom,imem.yaml +++ b/Documentation/devicetree/bindings/sram/qcom,imem.yaml @@ -18,8 +18,10 @@ properties: items: - enum: - qcom,apq8064-imem + - qcom,msm8226-imem - qcom,msm8974-imem - qcom,qcs404-imem + - qcom,qdu1000-imem - qcom,sc7180-imem - qcom,sc7280-imem - qcom,sdm630-imem diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml index 993430be355b..0922d1f71ba8 100644 --- a/Documentation/devicetree/bindings/sram/sram.yaml +++ b/Documentation/devicetree/bindings/sram/sram.yaml @@ -94,6 +94,7 @@ patternProperties: - samsung,exynos4210-sysram - samsung,exynos4210-sysram-ns - socionext,milbeaut-smp-sram + - stericsson,u8500-esram reg: description: diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt index b0bee7e42038..ab8b8fccc7af 100644 --- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt @@ -8,6 +8,7 @@ Required properties: * marvell,armada380-thermal * marvell,armadaxp-thermal * marvell,armada-ap806-thermal + * marvell,armada-ap807-thermal * marvell,armada-cp110-thermal Note: these bindings are deprecated for AP806/CP110 and should instead diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt deleted file mode 100644 index a3e9ec5dc7ac..000000000000 --- a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt +++ /dev/null @@ -1,41 +0,0 @@ -Binding for Thermal Sensor driver for BCM2835 SoCs. - -Required parameters: -------------------- - -compatible: should be one of: "brcm,bcm2835-thermal", - "brcm,bcm2836-thermal" or "brcm,bcm2837-thermal" -reg: Address range of the thermal registers. -clocks: Phandle of the clock used by the thermal sensor. -#thermal-sensor-cells: should be 0 (see Documentation/devicetree/bindings/thermal/thermal-sensor.yaml) - -Example: - -thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; - - thermal-sensors = <&thermal>; - - trips { - cpu-crit { - temperature = <80000>; - hysteresis = <0>; - type = "critical"; - }; - }; - - coefficients = <(-538) 407000>; - - cooling-maps { - }; - }; -}; - -thermal: thermal@7e212000 { - compatible = "brcm,bcm2835-thermal"; - reg = <0x7e212000 0x8>; - clocks = <&clocks BCM2835_CLOCK_TSENS>; - #thermal-sensor-cells = <0>; -}; diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml new file mode 100644 index 000000000000..2b6026d9fbcf --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/brcm,bcm2835-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM2835 thermal sensor + +maintainers: + - Stefan Wahren <stefan.wahren@i2se.com> + +allOf: + - $ref: thermal-sensor.yaml# + +properties: + compatible: + enum: + - brcm,bcm2835-thermal + - brcm,bcm2836-thermal + - brcm,bcm2837-thermal + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#thermal-sensor-cells": + const: 0 + +unevaluatedProperties: false + +required: + - compatible + - reg + - clocks + - '#thermal-sensor-cells' + +examples: + - | + #include <dt-bindings/clock/bcm2835.h> + + thermal@7e212000 { + compatible = "brcm,bcm2835-thermal"; + reg = <0x7e212000 0x8>; + clocks = <&clocks BCM2835_CLOCK_TSENS>; + #thermal-sensor-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index d1ec963a6834..27e9e16e6455 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -29,6 +29,8 @@ properties: items: - enum: - qcom,mdm9607-tsens + - qcom,msm8226-tsens + - qcom,msm8909-tsens - qcom,msm8916-tsens - qcom,msm8939-tsens - qcom,msm8974-tsens @@ -48,6 +50,7 @@ properties: - qcom,msm8953-tsens - qcom,msm8996-tsens - qcom,msm8998-tsens + - qcom,qcm2290-tsens - qcom,sc7180-tsens - qcom,sc7280-tsens - qcom,sc8180x-tsens @@ -56,6 +59,7 @@ properties: - qcom,sdm845-tsens - qcom,sm6115-tsens - qcom,sm6350-tsens + - qcom,sm6375-tsens - qcom,sm8150-tsens - qcom,sm8250-tsens - qcom,sm8350-tsens @@ -67,6 +71,12 @@ properties: enum: - qcom,ipq8074-tsens + - description: v2 of TSENS with combined interrupt + items: + - enum: + - qcom,ipq9574-tsens + - const: qcom,ipq8074-tsens + reg: items: - description: TM registers @@ -223,12 +233,7 @@ allOf: contains: enum: - qcom,ipq8064-tsens - - qcom,mdm9607-tsens - - qcom,msm8916-tsens - qcom,msm8960-tsens - - qcom,msm8974-tsens - - qcom,msm8976-tsens - - qcom,qcs404-tsens - qcom,tsens-v0_1 - qcom,tsens-v1 then: @@ -244,22 +249,7 @@ allOf: properties: compatible: contains: - enum: - - qcom,msm8953-tsens - - qcom,msm8996-tsens - - qcom,msm8998-tsens - - qcom,sc7180-tsens - - qcom,sc7280-tsens - - qcom,sc8180x-tsens - - qcom,sc8280xp-tsens - - qcom,sdm630-tsens - - qcom,sdm845-tsens - - qcom,sm6350-tsens - - qcom,sm8150-tsens - - qcom,sm8250-tsens - - qcom,sm8350-tsens - - qcom,sm8450-tsens - - qcom,tsens-v2 + const: qcom,tsens-v2 then: properties: interrupts: diff --git a/Documentation/devicetree/bindings/timer/brcm,kona-timer.txt b/Documentation/devicetree/bindings/timer/brcm,kona-timer.txt deleted file mode 100644 index 39adf54b4388..000000000000 --- a/Documentation/devicetree/bindings/timer/brcm,kona-timer.txt +++ /dev/null @@ -1,25 +0,0 @@ -Broadcom Kona Family timer ------------------------------------------------------ -This timer is used in the following Broadcom SoCs: - BCM11130, BCM11140, BCM11351, BCM28145, BCM28155 - -Required properties: -- compatible : "brcm,kona-timer" -- DEPRECATED: compatible : "bcm,kona-timer" -- reg : Register range for the timer -- interrupts : interrupt for the timer -- clocks: phandle + clock specifier pair of the external clock -- clock-frequency: frequency that the clock operates - -Only one of clocks or clock-frequency should be specified. - -Refer to clocks/clock-bindings.txt for generic clock consumer properties. - -Example: - timer@35006000 { - compatible = "brcm,kona-timer"; - reg = <0x35006000 0x1000>; - interrupts = <0x0 7 0x4>; - clocks = <&hub_timer_clk>; - }; - diff --git a/Documentation/devicetree/bindings/timer/brcm,kona-timer.yaml b/Documentation/devicetree/bindings/timer/brcm,kona-timer.yaml new file mode 100644 index 000000000000..d6af8383d6fc --- /dev/null +++ b/Documentation/devicetree/bindings/timer/brcm,kona-timer.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/brcm,kona-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Kona family timer + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + const: brcm,kona-timer + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: true + +oneOf: + - required: + - clocks + - required: + - clock-frequency + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm281xx.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + timer@35006000 { + compatible = "brcm,kona-timer"; + reg = <0x35006000 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&aon_ccu BCM281XX_AON_CCU_HUB_TIMER>; + }; +... diff --git a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml index bc5e6f226295..dbba780c9b02 100644 --- a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml +++ b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Cadence TTC - Triple Timer Counter maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml index 716c6afcca1f..dbe1267af06a 100644 --- a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml +++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml @@ -31,9 +31,13 @@ properties: - enum: - fsl,imx6sl-gpt - fsl,imx6sx-gpt + - fsl,imx8mp-gpt - fsl,imxrt1050-gpt - fsl,imxrt1170-gpt - const: fsl,imx6dl-gpt + - items: + - const: fsl,imx6ul-gpt + - const: fsl,imx6sx-gpt reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/timer/loongson,ls1x-pwmtimer.yaml b/Documentation/devicetree/bindings/timer/loongson,ls1x-pwmtimer.yaml new file mode 100644 index 000000000000..ad61ae55850b --- /dev/null +++ b/Documentation/devicetree/bindings/timer/loongson,ls1x-pwmtimer.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/loongson,ls1x-pwmtimer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson-1 PWM timer + +maintainers: + - Keguang Zhang <keguang.zhang@gmail.com> + +description: + Loongson-1 PWM timer can be used for system clock source + and clock event timers. + +properties: + compatible: + const: loongson,ls1b-pwmtimer + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/loongson,ls1x-clk.h> + #include <dt-bindings/interrupt-controller/irq.h> + clocksource: timer@1fe5c030 { + compatible = "loongson,ls1b-pwmtimer"; + reg = <0x1fe5c030 0x10>; + + clocks = <&clkc LS1X_CLKID_APB>; + interrupt-parent = <&intc0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/timer/ralink,rt2880-timer.yaml b/Documentation/devicetree/bindings/timer/ralink,rt2880-timer.yaml new file mode 100644 index 000000000000..daa7832babe3 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/ralink,rt2880-timer.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/ralink,rt2880-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Timer present in Ralink family SoCs + +maintainers: + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +properties: + compatible: + const: ralink,rt2880-timer + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + timer@100 { + compatible = "ralink,rt2880-timer"; + reg = <0x100 0x20>; + + clocks = <&sysc 3>; + + interrupt-parent = <&intc>; + interrupts = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml index 94bef9424df1..a0185e15a42f 100644 --- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml @@ -29,14 +29,15 @@ properties: oneOf: - items: - enum: - - sifive,fu540-c000-clint - - starfive,jh7100-clint - - starfive,jh7110-clint - - canaan,k210-clint - - const: sifive,clint0 + - canaan,k210-clint # Canaan Kendryte K210 + - sifive,fu540-c000-clint # SiFive FU540 + - starfive,jh7100-clint # StarFive JH7100 + - starfive,jh7110-clint # StarFive JH7110 + - const: sifive,clint0 # SiFive CLINT v0 IP block - items: - enum: - allwinner,sun20i-d1-clint + - thead,th1520-clint - const: thead,c900-clint - items: - const: sifive,clint0 @@ -45,14 +46,9 @@ properties: description: For the QEMU virt machine only description: - Should be "<vendor>,<chip>-clint" and "sifive,clint<version>". - Supported compatible strings are - - "sifive,fu540-c000-clint" for the SiFive CLINT v0 as integrated - onto the SiFive FU540 chip, "canaan,k210-clint" for the SiFive - CLINT v0 as integrated onto the Canaan Kendryte K210 chip, and - "sifive,clint0" for the SiFive CLINT v0 IP block with no chip - integration tweaks. - Please refer to sifive-blocks-ip-versioning.txt for details + Should be "<vendor>,<chip>-clint", followed by "sifive,clint<version>" + when compatible with a SiFive CLINT. Please refer to + sifive-blocks-ip-versioning.txt for details regarding the latter. reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 246863a9bc7e..ba2bfb547909 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -139,6 +139,8 @@ properties: - infineon,ir38164 # Infineon IR38263 Voltage Regulator - infineon,ir38263 + # Infineon IRPS5401 Voltage Regulator (PMIC) + - infineon,irps5401 # Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz) - infineon,slb9635tt # Infineon SLB9645 I2C TPM (new protocol, max 400khz) diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml index c5a06c048389..943dafb69529 100644 --- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml +++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml @@ -26,6 +26,7 @@ properties: - qcom,msm8994-ufshc - qcom,msm8996-ufshc - qcom,msm8998-ufshc + - qcom,sa8775p-ufshc - qcom,sc8280xp-ufshc - qcom,sdm845-ufshc - qcom,sm6350-ufshc @@ -70,6 +71,10 @@ properties: power-domains: maxItems: 1 + qcom,ice: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the Inline Crypto Engine node + reg: minItems: 1 maxItems: 2 @@ -105,6 +110,7 @@ allOf: contains: enum: - qcom,msm8998-ufshc + - qcom,sa8775p-ufshc - qcom,sc8280xp-ufshc - qcom,sm8250-ufshc - qcom,sm8350-ufshc @@ -187,6 +193,26 @@ allOf: # TODO: define clock bindings for qcom,msm8994-ufshc + - if: + properties: + qcom,ice: + maxItems: 1 + then: + properties: + reg: + maxItems: 1 + clocks: + minItems: 8 + maxItems: 8 + else: + properties: + reg: + minItems: 2 + maxItems: 2 + clocks: + minItems: 9 + maxItems: 11 + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml index a9988798898d..88cc1e3a0c88 100644 --- a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml +++ b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml @@ -54,7 +54,7 @@ properties: const: ufs-phy samsung,sysreg: - $ref: '/schemas/types.yaml#/definitions/phandle-array' + $ref: /schemas/types.yaml#/definitions/phandle-array description: Should be phandle/offset pair. The phandle to the syscon node which indicates the FSYSx sysreg interface and the offset of the control register for UFS io coherency setting. diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml index cae46c4982ad..69a93a0722f0 100644 --- a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml +++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml @@ -64,7 +64,7 @@ properties: description: size of memory intended as internal memory for endpoints buffers expressed in KB - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint16 cdns,phyrst-a-enable: description: Enable resetting of PHY if Rx fail is detected diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml index b26d26c2b023..782402800d4a 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml @@ -45,7 +45,9 @@ properties: - fsl,vf610-usb - const: fsl,imx27-usb - items: - - const: fsl,imx8dxl-usb + - enum: + - fsl,imx8dxl-usb + - fsl,imx8ulp-usb - const: fsl,imx7ulp-usb - const: fsl,imx6ul-usb - items: diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index d3506090f8b1..0a5c98ea711d 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -53,6 +53,7 @@ properties: - amlogic,meson8b-usb - amlogic,meson-gxbb-usb - amlogic,meson-g12a-usb + - amlogic,meson-a1-usb - intel,socfpga-agilex-hsotg - const: snps,dwc2 - const: amcc,dwc-otg diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml index 098b73134a1b..bb373eb025a5 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml +++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx SuperSpeed DWC3 USB SoC controller maintainers: - - Manish Narani <manish.narani@xilinx.com> + - Piyush Mehta <piyush.mehta@amd.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8qm-cdns3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8qm-cdns3.yaml new file mode 100644 index 000000000000..ceb76394af60 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/fsl,imx8qm-cdns3.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 NXP +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/fsl,imx8qm-cdns3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP iMX8QM Soc USB Controller + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: fsl,imx8qm-usb3 + + reg: + items: + - description: Register set for iMX USB3 Platform Control + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + ranges: true + + clocks: + items: + - description: Standby clock. Used during ultra low power states. + - description: USB bus clock for usb3 controller. + - description: AXI clock for AXI interface. + - description: ipg clock for register access. + - description: Core clock for usb3 controller. + + clock-names: + items: + - const: lpm + - const: bus + - const: aclk + - const: ipg + - const: core + + power-domains: + maxItems: 1 + +# Required child node: + +patternProperties: + "^usb@[0-9a-f]+$": + $ref: cdns,usb3.yaml# + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + - clocks + - clock-names + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-lpcg.h> + #include <dt-bindings/firmware/imx/rsrc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb@5b110000 { + compatible = "fsl,imx8qm-usb3"; + reg = <0x5b110000 0x10000>; + ranges; + clocks = <&usb3_lpcg IMX_LPCG_CLK_1>, + <&usb3_lpcg IMX_LPCG_CLK_0>, + <&usb3_lpcg IMX_LPCG_CLK_7>, + <&usb3_lpcg IMX_LPCG_CLK_4>, + <&usb3_lpcg IMX_LPCG_CLK_5>; + clock-names = "lpm", "bus", "aclk", "ipg", "core"; + assigned-clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>; + assigned-clock-rates = <250000000>; + power-domains = <&pd IMX_SC_R_USB_2>; + #address-cells = <1>; + #size-cells = <1>; + + usb@5b120000 { + compatible = "cdns,usb3"; + reg = <0x5b120000 0x10000>, /* memory area for OTG/DRD registers */ + <0x5b130000 0x10000>, /* memory area for HOST registers */ + <0x5b140000 0x10000>; /* memory area for DEVICE registers */ + reg-names = "otg", "xhci", "dev"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host", "peripheral", "otg", "wakeup"; + phys = <&usb3_phy>; + phy-names = "cdns3,usb3-phy"; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 9445764bd8de..b956bb5fada7 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -61,6 +61,7 @@ properties: - ibm,476gtr-ehci - nxp,lpc1850-ehci - qca,ar7100-ehci + - rockchip,rk3588-ehci - snps,hsdk-v1.0-ehci - socionext,uniphier-ehci - const: generic-ehci diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml index d06d1e7d8876..be268e23ca79 100644 --- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml @@ -44,6 +44,7 @@ properties: - hpe,gxp-ohci - ibm,476gtr-ohci - ingenic,jz4740-ohci + - rockchip,rk3588-ohci - snps,hsdk-v1.0-ohci - const: generic-ohci - enum: @@ -69,7 +70,7 @@ properties: clocks: minItems: 1 - maxItems: 3 + maxItems: 4 description: | In case the Renesas R-Car Gen3 SoCs: - if a host only channel: first clock should be host. @@ -147,6 +148,20 @@ allOf: then: properties: transceiver: false + - if: + properties: + compatible: + contains: + const: rockchip,rk3588-ohci + then: + properties: + clocks: + minItems: 4 + else: + properties: + clocks: + minItems: 1 + maxItems: 3 unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml new file mode 100644 index 000000000000..ff3a1707ef57 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/microchip,usb5744.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip USB5744 4-port Hub Controller + +description: + Microchip's USB5744 SmartHubTM IC is a 4 port, SuperSpeed (SS)/Hi-Speed (HS), + low power, low pin count configurable and fully compliant with the USB 3.1 + Gen 1 specification. The USB5744 also supports Full Speed (FS) and Low Speed + (LS) USB signaling, offering complete coverage of all defined USB operating + speeds. The new SuperSpeed hubs operate in parallel with the USB 2.0 + controller, so 5 Gbps SuperSpeed data transfers are not affected by slower + USB 2.0 traffic. + +maintainers: + - Piyush Mehta <piyush.mehta@amd.com> + - Michal Simek <michal.simek@amd.com> + +properties: + compatible: + enum: + - usb424,2744 + - usb424,5744 + - microchip,usb5744 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: + GPIO controlling the GRST# pin. + + vdd-supply: + description: + VDD power supply to the hub + + peer-hub: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the peer hub on the controller. + + i2c-bus: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle of an usb hub connected via i2c bus. + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: microchip,usb5744 + then: + properties: + reset-gpios: false + vdd-supply: false + peer-hub: false + i2c-bus: false + else: + $ref: /schemas/usb/usb-device.yaml + required: + - peer-hub + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c: i2c { + #address-cells = <1>; + #size-cells = <0>; + hub: usb-hub@2d { + compatible = "microchip,usb5744"; + reg = <0x2d>; + }; + }; + + usb { + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb424,2744"; + reg = <1>; + peer-hub = <&hub_3_0>; + i2c-bus = <&hub>; + reset-gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + + /* 3.0 hub on port 2 */ + hub_3_0: hub@2 { + compatible = "usb424,5744"; + reg = <2>; + peer-hub = <&hub_2_0>; + i2c-bus = <&hub>; + reset-gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml index e2270ce0c56b..c6e661e8915c 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml @@ -91,6 +91,7 @@ properties: phys: minItems: 1 + maxItems: 2 description: Must contain an entry for each entry in phy-names. See ../phy/phy-bindings.txt for details. @@ -99,13 +100,7 @@ properties: minItems: 1 items: - const: usb2-0 - - const: usb2-1 - - const: usb2-2 - - const: usb2-3 - const: usb3-0 - - const: usb3-1 - - const: usb3-2 - - const: usb3-3 avddio-usb-supply: description: PCIe/USB3 analog logic power supply. Must supply 1.05 V. diff --git a/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml b/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml new file mode 100644 index 000000000000..c0201da002f6 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/onnn,nb7vpq904m.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ON Semiconductor Type-C DisplayPort ALT Mode Linear Redriver + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +properties: + compatible: + enum: + - onnn,nb7vpq904m + + reg: + maxItems: 1 + + vcc-supply: + description: power supply (1.8V) + + enable-gpios: true + + retimer-switch: + description: Flag the port as possible handle of SuperSpeed signals retiming + type: boolean + + orientation-switch: + description: Flag the port as possible handler of orientation switching + type: boolean + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Super Speed (SS) Output endpoint to the Type-C connector + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + description: Super Speed (SS) Input endpoint from the Super-Speed PHY + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + An array of physical data lane indexes. Position determines how + lanes are connected to the redriver, It is assumed the same order + is kept on the other side of the redriver. + Lane number represents the following + - 0 is RX2 lane + - 1 is TX2 lane + - 2 is TX1 lane + - 3 is RX1 lane + The position determines the physical port of the redriver, in the + order A, B, C & D. + oneOf: + - items: + - const: 0 + - const: 1 + - const: 2 + - const: 3 + description: | + This is the lanes default layout + - Port A to RX2 lane + - Port B to TX2 lane + - Port C to TX1 lane + - Port D to RX1 lane + - items: + - const: 3 + - const: 2 + - const: 1 + - const: 0 + description: | + This is the USBRX2/USBTX2 and USBRX1/USBTX1 swapped lanes layout + - Port A to RX1 lane + - Port B to TX1 lane + - Port C to TX2 lane + - Port D to RX2 lane + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Sideband Use (SBU) AUX lines endpoint to the Type-C connector for the purpose of + handling altmode muxing and orientation switching. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + typec-mux@32 { + compatible = "onnn,nb7vpq904m"; + reg = <0x32>; + + vcc-supply = <&vreg_l15b_1p8>; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_con_ss: endpoint { + remote-endpoint = <&typec_con_ss>; + }; + }; + port@1 { + reg = <1>; + phy_con_ss: endpoint { + remote-endpoint = <&usb_phy_ss>; + data-lanes = <3 2 1 0>; + }; + }; + port@2 { + reg = <2>; + usb_con_sbu: endpoint { + remote-endpoint = <&typec_dp_aux>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index d84281926f10..5c1322972f4e 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -17,6 +17,7 @@ properties: - qcom,ipq6018-dwc3 - qcom,ipq8064-dwc3 - qcom,ipq8074-dwc3 + - qcom,ipq9574-dwc3 - qcom,msm8953-dwc3 - qcom,msm8994-dwc3 - qcom,msm8996-dwc3 @@ -133,7 +134,6 @@ required: - "#address-cells" - "#size-cells" - ranges - - power-domains - clocks - clock-names - interrupts @@ -177,6 +177,7 @@ allOf: compatible: contains: enum: + - qcom,ipq9574-dwc3 - qcom,msm8953-dwc3 - qcom,msm8996-dwc3 - qcom,msm8998-dwc3 diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml new file mode 100644 index 000000000000..55df3129a0bc --- /dev/null +++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml @@ -0,0 +1,190 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/qcom,pmic-typec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PMIC based USB Type-C block + +maintainers: + - Bryan O'Donoghue <bryan.odonoghue@linaro.org> + +description: + Qualcomm PMIC Type-C block + +properties: + compatible: + enum: + - qcom,pm8150b-typec + + connector: + type: object + $ref: /schemas/connector/usb-connector.yaml# + unevaluatedProperties: false + + reg: + description: Type-C port and pdphy SPMI register base offsets + maxItems: 2 + + interrupts: + items: + - description: Type-C CC attach notification, VBUS error, tCCDebounce done + - description: Type-C VCONN powered + - description: Type-C CC state change + - description: Type-C VCONN over-current + - description: Type-C VBUS state change + - description: Type-C Attach/detach notification + - description: Type-C Legacy cable detect + - description: Type-C Try.Src Try.Snk state change + - description: Power Domain Signal TX - HardReset or CableReset signal TX + - description: Power Domain Signal RX - HardReset or CableReset signal RX + - description: Power Domain TX complete + - description: Power Domain RX complete + - description: Power Domain TX fail + - description: Power Domain TX message discard + - description: Power Domain RX message discard + - description: Power Domain Fast Role Swap event + + interrupt-names: + items: + - const: or-rid-detect-change + - const: vpd-detect + - const: cc-state-change + - const: vconn-oc + - const: vbus-change + - const: attach-detach + - const: legacy-cable-detect + - const: try-snk-src-detect + - const: sig-tx + - const: sig-rx + - const: msg-tx + - const: msg-rx + - const: msg-tx-failed + - const: msg-tx-discarded + - const: msg-rx-discarded + - const: fr-swap + + vdd-vbus-supply: + description: VBUS power supply. + + vdd-pdphy-supply: + description: VDD regulator supply to the PDPHY. + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + Contains a port which produces data-role switching messages. + +required: + - compatible + - reg + - interrupts + - interrupt-names + - vdd-vbus-supply + - vdd-pdphy-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/usb/pd.h> + + pmic { + #address-cells = <1>; + #size-cells = <0>; + + pm8150b_typec: typec@1500 { + compatible = "qcom,pm8150b-typec"; + reg = <0x1500>, + <0x1700>; + + interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x00 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x01 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x02 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x03 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x04 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x05 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x06 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x07 IRQ_TYPE_EDGE_RISING>; + + interrupt-names = "or-rid-detect-change", + "vpd-detect", + "cc-state-change", + "vconn-oc", + "vbus-change", + "attach-detach", + "legacy-cable-detect", + "try-snk-src-detect", + "sig-tx", + "sig-rx", + "msg-tx", + "msg-rx", + "msg-tx-failed", + "msg-tx-discarded", + "msg-rx-discarded", + "fr-swap"; + + vdd-vbus-supply = <&pm8150b_vbus>; + vdd-pdphy-supply = <&vreg_l2a_3p1>; + + connector { + compatible = "usb-c-connector"; + + power-role = "source"; + data-role = "dual"; + self-powered; + + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_DUAL_ROLE | + PDO_FIXED_USB_COMM | PDO_FIXED_DATA_SWAP)>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pmic_typec_mux_out: endpoint { + remote-endpoint = <&usb_phy_typec_mux_in>; + }; + }; + + port@1 { + reg = <1>; + pmic_typec_role_switch_out: endpoint { + remote-endpoint = <&usb_role_switch_in>; + }; + }; + }; + }; + }; + }; + + usb { + dr_mode = "otg"; + usb-role-switch; + port { + usb_role_switch_in: endpoint { + remote-endpoint = <&pmic_typec_role_switch_out>; + }; + }; + }; + + usb-phy { + orientation-switch; + port { + usb_phy_typec_mux_in: endpoint { + remote-endpoint = <&pmic_typec_mux_out>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml index 50edc4da780e..a696f23730d3 100644 --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -44,15 +44,15 @@ properties: It's either a single common DWC3 interrupt (dwc_usb3) or individual interrupts for the host, gadget and DRD modes. minItems: 1 - maxItems: 3 + maxItems: 4 interrupt-names: minItems: 1 - maxItems: 3 + maxItems: 4 oneOf: - const: dwc_usb3 - items: - enum: [host, peripheral, otg] + enum: [host, peripheral, otg, wakeup] clocks: description: @@ -287,7 +287,7 @@ properties: description: High-Speed PHY interface selection between UTMI+ and ULPI when the DWC_USB3_HSPHY_INTERFACE has value 3. - $ref: /schemas/types.yaml#/definitions/uint8 + $ref: /schemas/types.yaml#/definitions/string enum: [utmi, ulpi] snps,quirk-frame-length-adjustment: diff --git a/Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml b/Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml new file mode 100644 index 000000000000..24aa9c10d6ab --- /dev/null +++ b/Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/starfive,jh7110-usb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 wrapper module for the Cadence USBSS-DRD controller + +maintainers: + - Minda Chen <minda.chen@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-usb + + ranges: true + + starfive,stg-syscon: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to System Register Controller stg_syscon node. + - description: dr mode register offset of STG_SYSCONSAIF__SYSCFG register for USB. + description: + The phandle to System Register Controller syscon node and the offset + of STG_SYSCONSAIF__SYSCFG register for USB. + + dr_mode: + enum: [host, otg, peripheral] + + "#address-cells": + enum: [1, 2] + + "#size-cells": + enum: [1, 2] + + clocks: + items: + - description: link power management clock + - description: standby clock + - description: APB clock + - description: AXI clock + - description: UTMI APB clock + + clock-names: + items: + - const: lpm + - const: stb + - const: apb + - const: axi + - const: utmi_apb + + resets: + items: + - description: Power up reset + - description: APB clock reset + - description: AXI clock reset + - description: UTMI APB clock reset + + reset-names: + items: + - const: pwrup + - const: apb + - const: axi + - const: utmi_apb + +patternProperties: + "^usb@[0-9a-f]+$": + $ref: cdns,usb3.yaml# + description: Required child node + +required: + - compatible + - ranges + - starfive,stg-syscon + - '#address-cells' + - '#size-cells' + - dr_mode + - clocks + - resets + +additionalProperties: false + +examples: + - | + usb@10100000 { + compatible = "starfive,jh7110-usb"; + ranges = <0x0 0x10100000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + starfive,stg-syscon = <&stg_syscon 0x4>; + clocks = <&syscrg 4>, + <&stgcrg 5>, + <&stgcrg 1>, + <&stgcrg 3>, + <&stgcrg 2>; + clock-names = "lpm", "stb", "apb", "axi", "utmi_apb"; + resets = <&stgcrg 10>, + <&stgcrg 8>, + <&stgcrg 7>, + <&stgcrg 9>; + reset-names = "pwrup", "apb", "axi", "utmi_apb"; + dr_mode = "host"; + + usb@0 { + compatible = "cdns,usb3"; + reg = <0x0 0x10000>, + <0x10000 0x10000>, + <0x20000 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <100>, <108>, <110>; + interrupt-names = "host", "peripheral", "otg"; + maximum-speed = "super-speed"; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/usb251xb.yaml b/Documentation/devicetree/bindings/usb/usb251xb.yaml index 4d1530816817..ac5b99710332 100644 --- a/Documentation/devicetree/bindings/usb/usb251xb.yaml +++ b/Documentation/devicetree/bindings/usb/usb251xb.yaml @@ -231,7 +231,7 @@ properties: power-on sequence to a port until the port has adequate power. swap-dx-lanes: - $ref: /schemas/types.yaml#/definitions/uint8-array + $ref: /schemas/types.yaml#/definitions/uint32-array description: | Specifies the ports which will swap the differential-pair (D+/D-), default is not-swapped. diff --git a/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml b/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml index 04c123c7252a..868dffe314bc 100644 --- a/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml +++ b/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx udc controller maintainers: - - Manish Narani <manish.narani@xilinx.com> + - Piyush Mehta <piyush.mehta@amd.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 82d39ab0231b..af60bf1a6664 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -388,6 +388,8 @@ patternProperties: description: EDIMAX Technology Co., Ltd "^edt,.*": description: Emerging Display Technologies + "^ees,.*": + description: Emtop Embedded Solutions "^eeti,.*": description: eGalax_eMPIA Technology Inc "^einfochips,.*": @@ -617,6 +619,8 @@ patternProperties: description: Integrated Micro-Electronics Inc. "^incircuit,.*": description: In-Circuit GmbH + "^indiedroid,.*": + description: Indiedroid "^inet-tek,.*": description: Shenzhen iNet Mobile Internet Technology Co., Ltd "^infineon,.*": @@ -781,6 +785,8 @@ patternProperties: description: Nanjing Loongmasses Ltd. "^lsi,.*": description: LSI Corp. (LSI Logic) + "^lunzn,.*": + description: Shenzhen Lunzn Technology Co., Ltd. "^lwn,.*": description: Liebherr-Werk Nenzing GmbH "^lxa,.*": @@ -1189,6 +1195,8 @@ patternProperties: description: SHIFT GmbH "^shimafuji,.*": description: Shimafuji Electric, Inc. + "^shineworld,.*": + description: ShineWorld Innovations "^shiratech,.*": description: Shiratech Solutions "^si-en,.*": @@ -1267,6 +1275,8 @@ patternProperties: description: SpinalHDL "^sprd,.*": description: Spreadtrum Communications Inc. + "^square,.*": + description: Square "^ssi,.*": description: SSI Computer Corp "^sst,.*": @@ -1339,6 +1349,8 @@ patternProperties: description: Technologic Systems "^techstar,.*": description: Shenzhen Techstar Electronics Co., Ltd. + "^teejet,.*": + description: TeeJet "^teltonika,.*": description: Teltonika Networks "^tempo,.*": diff --git a/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml b/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml index 8444c56dd602..dc1ff39d05a0 100644 --- a/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml @@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx AXI/PLB softcore and window Watchdog Timer maintainers: - - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> - - Srinivas Neeli <srinivas.neeli@xilinx.com> + - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com> + - Srinivas Neeli <srinivas.neeli@amd.com> description: The Timebase watchdog timer(WDT) is a free-running 32 bit counter. diff --git a/Documentation/devicetree/usage-model.rst b/Documentation/devicetree/usage-model.rst index b6a287955ee5..0717426856b2 100644 --- a/Documentation/devicetree/usage-model.rst +++ b/Documentation/devicetree/usage-model.rst @@ -415,6 +415,6 @@ When using the DT, this creates problems for of_platform_populate() because it must decide whether to register each node as either a platform_device or an amba_device. This unfortunately complicates the device creation model a little bit, but the solution turns out not to -be too invasive. If a node is compatible with "arm,amba-primecell", then +be too invasive. If a node is compatible with "arm,primecell", then of_platform_populate() will register it as an amba_device instead of a platform_device. |