| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Boundary condition fixes for bugs unearthed by the perf fuzzer"
* tag 'perf-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix unchecked MSR access error caused by VLBR_EVENT
perf/x86/intel: Fix a crash caused by zero PEBS status
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"The freshest pile of shiny x86 fixes for 5.12:
- Add the arch-specific mapping between physical and logical CPUs to
fix devicetree-node lookups
- Restore the IRQ2 ignore logic
- Fix get_nr_restart_syscall() to return the correct restart syscall
number. Split in a 4-patches set to avoid kABI breakage when
backporting to dead kernels"
* tag 'x86_urgent_for_v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic/of: Fix CPU devicetree-node lookups
x86/ioapic: Ignore IRQ2 again
x86: Introduce restart_block->arch_data to remove TS_COMPAT_RESTART
x86: Introduce TS_COMPAT_RESTART to fix get_nr_restart_syscall()
x86: Move TS_COMPAT back to asm/thread_info.h
kernel, fs: Introduce and use set_restart_fn() and arch_set_restart_data()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a possible stack corruption and subsequent DLPAR failure in the
rpadlpar_io PCI hotplug driver
- Two build fixes for uncommon configurations
Thanks to Christophe Leroy and Tyrel Datwyler.
* tag 'powerpc-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
PCI: rpadlpar: Fix potential drc_name corruption in store functions
powerpc: Force inlining of cpu_has_feature() to avoid build failure
powerpc/vdso32: Add missing _restgpr_31_x to fix build failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"A handful of fixes for 5.12:
- fix the SBI remote fence numbers for hypervisor fences, which had
been transcribed in the wrong order in Linux. These fences are only
used with the KVM patches applied.
- fix a whole host of build warnings, these should have no functional
change.
- fix init_resources() to prevent an off-by-one error from causing an
out-of-bounds array reference. This was manifesting during boot on
vexriscv.
- ensure the KASAN mappings are visible before proceeding to use
them"
* tag 'riscv-for-linus-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Correct SPARSEMEM configuration
RISC-V: kasan: Declare kasan_shallow_populate() static
riscv: Ensure page table writes are flushed when initializing KASAN vmalloc
RISC-V: Fix out-of-bounds accesses in init_resources()
riscv: Fix compilation error with Canaan SoC
ftrace: Fix spelling mistake "disabed" -> "disabled"
riscv: fix bugon.cocci warnings
riscv: process: Fix no prototype for arch_dup_task_struct
riscv: ftrace: Use ftrace_get_regs helper
riscv: process: Fix no prototype for show_regs
riscv: syscall_table: Reduce W=1 compilation warnings noise
riscv: time: Fix no prototype for time_init
riscv: ptrace: Fix no prototype warnings
riscv: sbi: Fix comment of __sbi_set_timer_v01
riscv: irq: Fix no prototype warning
riscv: traps: Fix no prototype warnings
RISC-V: correct enum sbi_ext_rfence_fid
|
|
Architectures that describe the CPU topology in devicetree and do not have
an identity mapping between physical and logical CPU ids must override the
default implementation of arch_match_cpu_phys_id().
Failing to do so breaks CPU devicetree-node lookups using of_get_cpu_node()
and of_cpu_device_node_get() which several drivers rely on. It also causes
the CPU struct devices exported through sysfs to point to the wrong
devicetree nodes.
On x86, CPUs are described in devicetree using their APIC ids and those
do not generally coincide with the logical ids, even if CPU0 typically
uses APIC id 0.
Add the missing implementation of arch_match_cpu_phys_id() so that CPU-node
lookups work also with SMP.
Apart from fixing the broken sysfs devicetree-node links this likely does
not affect current users of mainline kernels on x86.
Fixes: 4e07db9c8db8 ("x86/devicetree: Use CPU description from Device Tree")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210312092033.26317-1-johan@kernel.org
|
|
Pull kvm fixes from Paolo Bonzini:
"Fixes for kvm on x86:
- new selftests
- fixes for migration with HyperV re-enlightenment enabled
- fix RCU/SRCU usage
- fixes for local_irq_restore misuse false positive"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
documentation/kvm: additional explanations on KVM_SET_BOOT_CPU_ID
x86/kvm: Fix broken irq restoration in kvm_wait
KVM: X86: Fix missing local pCPU when executing wbinvd on all dirty pCPUs
KVM: x86: Protect userspace MSR filter with SRCU, and set atomically-ish
selftests: kvm: add set_boot_cpu_id test
selftests: kvm: add _vm_ioctl
selftests: kvm: add get_msr_index_features
selftests: kvm: Add basic Hyper-V clocksources tests
KVM: x86: hyper-v: Don't touch TSC page values when guest opted for re-enlightenment
KVM: x86: hyper-v: Track Hyper-V TSC page status
KVM: x86: hyper-v: Prevent using not-yet-updated TSC page by secondary CPUs
KVM: x86: hyper-v: Limit guest to writing zero to HV_X64_MSR_TSC_EMULATION_STATUS
KVM: x86/mmu: Store the address space ID in the TDP iterator
KVM: x86/mmu: Factor out tdp_iter_return_to_root
KVM: x86/mmu: Fix RCU usage when atomically zapping SPTEs
KVM: x86/mmu: Fix RCU usage in handle_removed_tdp_mmu_page
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- disable preemption when accessing local per-cpu variables in the new
counter set driver
- fix by a factor of four increased steal time due to missing
cputime_to_nsecs() conversion
- fix PCI device structure leak
* tag 's390-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: fix leak of PCI device structure
s390/vtime: fix increased steal time accounting
s390/cpumf: disable preemption when accessing per-cpu variable
|
|
Vitaly ran into an issue with hotplugging CPU0 on an Amazon instance where
the matrix allocator claimed to be out of vectors. He analyzed it down to
the point that IRQ2, the PIC cascade interrupt, which is supposed to be not
ever routed to the IO/APIC ended up having an interrupt vector assigned
which got moved during unplug of CPU0.
The underlying issue is that IRQ2 for various reasons (see commit
af174783b925 ("x86: I/O APIC: Never configure IRQ2" for details) is treated
as a reserved system vector by the vector core code and is not accounted as
a regular vector. The Amazon BIOS has an routing entry of pin2 to IRQ2
which causes the IO/APIC setup to claim that interrupt which is granted by
the vector domain because there is no sanity check. As a consequence the
allocation counter of CPU0 underflows which causes a subsequent unplug to
fail with:
[ ... ] CPU 0 has 4294967295 vectors, 589 available. Cannot disable CPU
There is another sanity check missing in the matrix allocator, but the
underlying root cause is that the IO/APIC code lost the IRQ2 ignore logic
during the conversion to irqdomains.
For almost 6 years nobody complained about this wreckage, which might
indicate that this requirement could be lifted, but for any system which
actually has a PIC IRQ2 is unusable by design so any routing entry has no
effect and the interrupt cannot be connected to a device anyway.
Due to that and due to history biased paranoia reasons restore the IRQ2
ignore logic and treat it as non existent despite a routing entry claiming
otherwise.
Fixes: d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces")
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210318192819.636943062@linutronix.de
|
|
After commit 997acaf6b4b59c (lockdep: report broken irq restoration), the guest
splatting below during boot:
raw_local_irq_restore() called with IRQs enabled
WARNING: CPU: 1 PID: 169 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x26/0x30
Modules linked in: hid_generic usbhid hid
CPU: 1 PID: 169 Comm: systemd-udevd Not tainted 5.11.0+ #25
RIP: 0010:warn_bogus_irq_restore+0x26/0x30
Call Trace:
kvm_wait+0x76/0x90
__pv_queued_spin_lock_slowpath+0x285/0x2e0
do_raw_spin_lock+0xc9/0xd0
_raw_spin_lock+0x59/0x70
lockref_get_not_dead+0xf/0x50
__legitimize_path+0x31/0x60
legitimize_root+0x37/0x50
try_to_unlazy_next+0x7f/0x1d0
lookup_fast+0xb0/0x170
path_openat+0x165/0x9b0
do_filp_open+0x99/0x110
do_sys_openat2+0x1f1/0x2e0
do_sys_open+0x5c/0x80
__x64_sys_open+0x21/0x30
do_syscall_64+0x32/0x50
entry_SYSCALL_64_after_hwframe+0x44/0xae
The new consistency checking, expects local_irq_save() and
local_irq_restore() to be paired and sanely nested, and therefore expects
local_irq_restore() to be called with irqs disabled.
The irqflags handling in kvm_wait() which ends up doing:
local_irq_save(flags);
safe_halt();
local_irq_restore(flags);
instead triggers it. This patch fixes it by using
local_irq_disable()/enable() directly.
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1615791328-2735-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In order to deal with noncoherent DMA, we should execute wbinvd on
all dirty pCPUs when guest wbinvd exits to maintain data consistency.
smp_call_function_many() does not execute the provided function on the
local core, therefore replace it by on_each_cpu_mask().
Reported-by: Nadav Amit <namit@vmware.com>
Cc: Nadav Amit <namit@vmware.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1615517151-7465-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fix a plethora of issues with MSR filtering by installing the resulting
filter as an atomic bundle instead of updating the live filter one range
at a time. The KVM_X86_SET_MSR_FILTER ioctl() isn't truly atomic, as
the hardware MSR bitmaps won't be updated until the next VM-Enter, but
the relevant software struct is atomically updated, which is what KVM
really needs.
Similar to the approach used for modifying memslots, make arch.msr_filter
a SRCU-protected pointer, do all the work configuring the new filter
outside of kvm->lock, and then acquire kvm->lock only when the new filter
has been vetted and created. That way vCPU readers either see the old
filter or the new filter in their entirety, not some half-baked state.
Yuan Yao pointed out a use-after-free in ksm_msr_allowed() due to a
TOCTOU bug, but that's just the tip of the iceberg...
- Nothing is __rcu annotated, making it nigh impossible to audit the
code for correctness.
- kvm_add_msr_filter() has an unpaired smp_wmb(). Violation of kernel
coding style aside, the lack of a smb_rmb() anywhere casts all code
into doubt.
- kvm_clear_msr_filter() has a double free TOCTOU bug, as it grabs
count before taking the lock.
- kvm_clear_msr_filter() also has memory leak due to the same TOCTOU bug.
The entire approach of updating the live filter is also flawed. While
installing a new filter is inherently racy if vCPUs are running, fixing
the above issues also makes it trivial to ensure certain behavior is
deterministic, e.g. KVM can provide deterministic behavior for MSRs with
identical settings in the old and new filters. An atomic update of the
filter also prevents KVM from getting into a half-baked state, e.g. if
installing a filter fails, the existing approach would leave the filter
in a half-baked state, having already committed whatever bits of the
filter were already processed.
[*] https://lkml.kernel.org/r/20210312083157.25403-1-yaoyuan0329os@gmail.com
Fixes: 1a155254ff93 ("KVM: x86: Introduce MSR filtering")
Cc: stable@vger.kernel.org
Cc: Alexander Graf <graf@amazon.com>
Reported-by: Yuan Yao <yaoyuan0329os@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210316184436.2544875-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
re-enlightenment
When guest opts for re-enlightenment notifications upon migration, it is
in its right to assume that TSC page values never change (as they're only
supposed to change upon migration and the host has to keep things as they
are before it receives confirmation from the guest). This is mostly true
until the guest is migrated somewhere. KVM userspace (e.g. QEMU) will
trigger masterclock update by writing to HV_X64_MSR_REFERENCE_TSC, by
calling KVM_SET_CLOCK,... and as TSC value and kvmclock reading drift
apart (even slightly), the update causes TSC page values to change.
The issue at hand is that when Hyper-V is migrated, it uses stale (cached)
TSC page values to compute the difference between its own clocksource
(provided by KVM) and its guests' TSC pages to program synthetic timers
and in some cases, when TSC page is updated, this puts all stimer
expirations in the past. This, in its turn, causes an interrupt storm
and L2 guests not making much forward progress.
Note, KVM doesn't fully implement re-enlightenment notification. Basically,
the support for reenlightenment MSRs is just a stub and userspace is only
expected to expose the feature when TSC scaling on the expected destination
hosts is available. With TSC scaling, no real re-enlightenment is needed
as TSC frequency doesn't change. With TSC scaling becoming ubiquitous, it
likely makes little sense to fully implement re-enlightenment in KVM.
Prevent TSC page from being updated after migration. In case it's not the
guest who's initiating the change and when TSC page is already enabled,
just keep it as it is: TSC value is supposed to be preserved across
migration and TSC frequency can't change with re-enlightenment enabled.
The guest is doomed anyway if any of this is not true.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210316143736.964151-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Create an infrastructure for tracking Hyper-V TSC page status, i.e. if it
was updated from guest/host side or if we've failed to set it up (because
e.g. guest wrote some garbage to HV_X64_MSR_REFERENCE_TSC) and there's no
need to retry.
Also, in a hypothetical situation when we are in 'always catchup' mode for
TSC we can now avoid contending 'hv->hv_lock' on every guest enter by
setting the state to HV_TSC_PAGE_BROKEN after compute_tsc_page_parameters()
returns false.
Check for HV_TSC_PAGE_SET state instead of '!hv->tsc_ref.tsc_sequence' in
get_time_ref_counter() to properly handle the situation when we failed to
write the updated TSC page values to the guest.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210316143736.964151-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was
implemented. We can safely remove it, because the kernel has grown
to have many more reliable mechanisms to determine if device is
supported or not.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer:
"Fix for fdt alignment when image is compressed"
* tag 'mips-fixes_5.12_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: vmlinux.lds.S: Fix appended dtb not properly aligned
|
|
When KVM_REQ_MASTERCLOCK_UPDATE request is issued (e.g. after migration)
we need to make sure no vCPU sees stale values in PV clock structures and
thus all vCPUs are kicked with KVM_REQ_CLOCK_UPDATE. Hyper-V TSC page
clocksource is global and kvm_guest_time_update() only updates in on vCPU0
but this is not entirely correct: nothing blocks some other vCPU from
entering the guest before we finish the update on CPU0 and it can read
stale values from the page.
Invalidate TSC page in kvm_gen_update_masterclock() to switch all vCPUs
to using MSR based clocksource (HV_X64_MSR_TIME_REF_COUNT).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210316143736.964151-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
HV_X64_MSR_TSC_EMULATION_STATUS
HV_X64_MSR_TSC_EMULATION_STATUS indicates whether TSC accesses are emulated
after migration (to accommodate for a different host TSC frequency when TSC
scaling is not supported; we don't implement this in KVM). Guest can use
the same MSR to stop TSC access emulation by writing zero. Writing anything
else is forbidden.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210316143736.964151-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There are two issues for RV32,
1) if use FLATMEM, it is useless to enable SPARSEMEM_STATIC.
2) if use SPARSMEM, both SPARSEMEM_VMEMMAP and SPARSEMEM_STATIC is enabled.
Fixes: d95f1a542c3d ("RISC-V: Implement sparsemem")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Without this I get a missing prototype warning.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: e178d670f251 ("riscv/kasan: add KASAN_VMALLOC support")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Make sure that writes to kernel page table during KASAN vmalloc
initialization are made visible by adding a sfence.vma.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Fixes: e178d670f251 ("riscv/kasan: add KASAN_VMALLOC support")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
init_resources() allocates an array of resources, based on the current
total number of memory regions and reserved memory regions. However,
allocating this array using memblock_alloc() might increase the number
of reserved memory regions. If that happens, populating the array later
based on the new number of regions will cause out-of-bounds writes
beyond the end of the allocated array.
Fix this by allocating one more entry, which may or may not be used.
Fixes: 797f0375dd2ef5cd ("RISC-V: Do not allocate memblock while iterating reserved memblocks")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
When CONFIG_SOC_CANAAN is selected, the K210 sysctl driver is always
compiled. Since this driver early init function calls the function
k210_clk_early_init() implemented by the K210 clk driver, this driver
must also always be selected for compilation ot avoid build failures.
Avoid such build failures by always selecting CONFIG_COMMON_CLK and
CONFIG_COMMON_CLK_K210 when CONFIG_SOC_CANAAN is enabled.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Fixes: c6ca7616f7d5 ("clk: Add RISC-V Canaan Kendryte K210 clock driver")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
There is a spelling mistake in a comment, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Use BUG_ON instead of a if condition followed by BUG.
Generated by: scripts/coccinelle/misc/bugon.cocci
Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported")
CC: Guo Ren <guoren@linux.alibaba.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Commit 6654111c893f ("MIPS: vmlinux.lds.S: align raw appended dtb to 8
bytes") changed the alignment from STRUCT_ALIGNMENT bytes to 8 bytes.
The commit's message makes it sound like it was actually done on
purpose, but this is not the case. The commit was written when raw
appended dtb were not aligned at all. The STRUCT_ALIGN() was added a few
days before, in commit 7a05293af39f ("MIPS: boot/compressed: Copy DTB to
aligned address"). The true purpose of the commit was not to align
specifically to 8 bytes, but to make sure that the generated vmlinux'
size was properly padded to the alignment required for DTBs.
While the switch to 8-byte alignment worked for vmlinux-appended dtb
blobs, it broke vmlinuz-appended dtb blobs, as the decompress routine
moves the blob to a STRUCT_ALIGNMENT aligned address.
Fix this by changing the raw appended dtb blob alignment from 8 bytes
back to STRUCT_ALIGNMENT bytes in vmlinux.lds.S.
Fixes: 6654111c893f ("MIPS: vmlinux.lds.S: align raw appended dtb to 8 bytes")
Cc: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Save the current_thread_info()->status of X86 in the new
restart_block->arch_data field so TS_COMPAT_RESTART can be removed again.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210201174716.GA17898@redhat.com
|
|
The comment in get_nr_restart_syscall() says:
* The problem is that we can get here when ptrace pokes
* syscall-like values into regs even if we're not in a syscall
* at all.
Yes, but if not in a syscall then the
status & (TS_COMPAT|TS_I386_REGS_POKED)
check below can't really help:
- TS_COMPAT can't be set
- TS_I386_REGS_POKED is only set if regs->orig_ax was changed by
32bit debugger; and even in this case get_nr_restart_syscall()
is only correct if the tracee is 32bit too.
Suppose that a 64bit debugger plays with a 32bit tracee and
* Tracee calls sleep(2) // TS_COMPAT is set
* User interrupts the tracee by CTRL-C after 1 sec and does
"(gdb) call func()"
* gdb saves the regs by PTRACE_GETREGS
* does PTRACE_SETREGS to set %rip='func' and %orig_rax=-1
* PTRACE_CONT // TS_COMPAT is cleared
* func() hits int3.
* Debugger catches SIGTRAP.
* Restore original regs by PTRACE_SETREGS.
* PTRACE_CONT
get_nr_restart_syscall() wrongly returns __NR_restart_syscall==219, the
tracee calls ia32_sys_call_table[219] == sys_madvise.
Add the sticky TS_COMPAT_RESTART flag which survives after return to user
mode. It's going to be removed in the next step again by storing the
information in the restart block. As a further cleanup it might be possible
to remove also TS_I386_REGS_POKED with that.
Test-case:
$ cvs -d :pserver:anoncvs:anoncvs@sourceware.org:/cvs/systemtap co ptrace-tests
$ gcc -o erestartsys-trap-debuggee ptrace-tests/tests/erestartsys-trap-debuggee.c --m32
$ gcc -o erestartsys-trap-debugger ptrace-tests/tests/erestartsys-trap-debugger.c -lutil
$ ./erestartsys-trap-debugger
Unexpected: retval 1, errno 22
erestartsys-trap-debugger: ptrace-tests/tests/erestartsys-trap-debugger.c:421
Fixes: 609c19a385c8 ("x86/ptrace: Stop setting TS_COMPAT in ptrace code")
Reported-by: Jan Kratochvil <jan.kratochvil@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210201174709.GA17895@redhat.com
|
|
Move TS_COMPAT back to asm/thread_info.h, close to TS_I386_REGS_POKED.
It was moved to asm/processor.h by b9d989c7218a ("x86/asm: Move the
thread_info::status field to thread_struct"), then later 37a8f7c38339
("x86/asm: Move 'status' from thread_struct to thread_info") moved the
'status' field back but TS_COMPAT was forgotten.
Preparatory patch to fix the COMPAT case for get_nr_restart_syscall()
Fixes: 609c19a385c8 ("x86/ptrace: Stop setting TS_COMPAT in ptrace code")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210201174649.GA17880@redhat.com
|
|
On a Haswell machine, the perf_fuzzer managed to trigger this message:
[117248.075892] unchecked MSR access error: WRMSR to 0x3f1 (tried to
write 0x0400000000000000) at rIP: 0xffffffff8106e4f4
(native_write_msr+0x4/0x20)
[117248.089957] Call Trace:
[117248.092685] intel_pmu_pebs_enable_all+0x31/0x40
[117248.097737] intel_pmu_enable_all+0xa/0x10
[117248.102210] __perf_event_task_sched_in+0x2df/0x2f0
[117248.107511] finish_task_switch.isra.0+0x15f/0x280
[117248.112765] schedule_tail+0xc/0x40
[117248.116562] ret_from_fork+0x8/0x30
A fake event called VLBR_EVENT may use the bit 58 of the PEBS_ENABLE, if
the precise_ip is set. The bit 58 is reserved by the HW. Accessing the
bit causes the unchecked MSR access error.
The fake event doesn't support PEBS. The case should be rejected.
Fixes: 097e4311cda9 ("perf/x86: Add constraint to create guest LBR event without hw counter")
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1615555298-140216-2-git-send-email-kan.liang@linux.intel.com
|
|
A repeatable crash can be triggered by the perf_fuzzer on some Haswell
system.
https://lore.kernel.org/lkml/7170d3b-c17f-1ded-52aa-cc6d9ae999f4@maine.edu/
For some old CPUs (HSW and earlier), the PEBS status in a PEBS record
may be mistakenly set to 0. To minimize the impact of the defect, the
commit was introduced to try to avoid dropping the PEBS record for some
cases. It adds a check in the intel_pmu_drain_pebs_nhm(), and updates
the local pebs_status accordingly. However, it doesn't correct the PEBS
status in the PEBS record, which may trigger the crash, especially for
the large PEBS.
It's possible that all the PEBS records in a large PEBS have the PEBS
status 0. If so, the first get_next_pebs_record_by_bit() in the
__intel_pmu_pebs_event() returns NULL. The at = NULL. Since it's a large
PEBS, the 'count' parameter must > 1. The second
get_next_pebs_record_by_bit() will crash.
Besides the local pebs_status, correct the PEBS status in the PEBS
record as well.
Fixes: 01330d7288e0 ("perf/x86: Allow zero PEBS status with only single active event")
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1615555298-140216-1-git-send-email-kan.liang@linux.intel.com
|
|
Store the address space ID in the TDP iterator so that it can be
retrieved without having to bounce through the root shadow page. This
streamlines the code and fixes a Sparse warning about not properly using
rcu_dereference() when grabbing the ID from the root on the fly.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210315233803.2706477-5-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In tdp_mmu_iter_cond_resched there is a call to tdp_iter_start which
causes the iterator to continue its walk over the paging structure from
the root. This is needed after a yield as paging structure could have
been freed in the interim.
The tdp_iter_start call is not very clear and something of a hack. It
requires exposing tdp_iter fields not used elsewhere in tdp_mmu.c and
the effect is not obvious from the function name. Factor a more aptly
named function out of tdp_iter_start and call it from
tdp_mmu_iter_cond_resched and tdp_iter_start.
No functional change intended.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210315233803.2706477-4-bgardon@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fix a missing rcu_dereference in tdp_mmu_zap_spte_atomic.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210315233803.2706477-3-bgardon@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The pt passed into handle_removed_tdp_mmu_page does not need RCU
protection, as it is not at any risk of being freed by another thread at
that point. However, the implicit cast from tdp_sptep_t to u64 * dropped
the __rcu annotation without a proper rcu_derefrence. Fix this by
passing the pt as a tdp_ptep_t and then rcu_dereferencing it in
the function.
Suggested-by: Sean Christopherson <seanjc@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210315233803.2706477-2-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In commit 05bc1be6db4b2 ("s390/pci: create zPCI bus") we removed the
pci_dev_put() call matching the earlier pci_get_slot() done as part of
__zpci_event_availability(). This was based on the wrong understanding
that the device_put() done as part of pci_destroy_device() would counter
the pci_get_slot() when it only counters the initial reference. This
same understanding and existing bad example also lead to not doing
a pci_dev_put() in zpci_remove_device().
Since releasing the PCI devices, unlike releasing the PCI slot, does not
print any debug message for testing I added one in pci_release_dev().
This revealed that we are indeed leaking the PCI device on PCI
hotunplug. Further testing also revealed another missing pci_dev_put() in
disable_slot().
Fix this by adding the missing pci_dev_put() in disable_slot() and fix
zpci_remove_device() with the correct pci_dev_put() calls. Also instead
of calling pci_get_slot() in __zpci_event_availability() to determine if
a PCI device is registered and then doing the same again in
zpci_remove_device() do this once in zpci_remove_device() which makes
sure that the pdev in __zpci_event_availability() is only used for the
result of pci_scan_single_device() which does not need a reference count
decremnt as its ownership goes to the PCI bus.
Also move the check if zdev->zbus->bus is set into zpci_remove_device()
since it may be that we're removing a device with devfn != 0 which never
had a PCI bus. So we can still set the pdev->error_state to indicate
that the device is not usable anymore, add a flag to set the error state.
Fixes: 05bc1be6db4b2 ("s390/pci: create zPCI bus")
Cc: <stable@vger.kernel.org> # 5.8+: e1bff843cde6 s390/pci: remove superfluous zdev->zbus check
Cc: <stable@vger.kernel.org> # 5.8+: ba764dd703fe s390/pci: refactor zpci_create_device()
Cc: <stable@vger.kernel.org> # 5.8+
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Commit 152e9b8676c6e ("s390/vtime: steal time exponential moving average")
inadvertently changed the input value for account_steal_time() from
"cputime_to_nsecs(steal)" to just "steal", resulting in broken increased
steal time accounting.
Fix this by changing it back to "cputime_to_nsecs(steal)".
Fixes: 152e9b8676c6e ("s390/vtime: steal time exponential moving average")
Cc: <stable@vger.kernel.org> # 5.1
Reported-by: Sabine Forkel <sabine.forkel@de.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The following BUG message was triggered repeatedly when complete counter
sets are extracted from the CPUMF:
BUG: using smp_processor_id() in preemptible [00000000]
code: psvc-readsets/7759
caller is cf_diag_needspace+0x2c/0x100
CPU: 7 PID: 7759 Comm: psvc-readsets Not tainted 5.12.0
Hardware name: IBM 3906 M03 703 (LPAR)
Call Trace:
[<00000000c7043f78>] show_stack+0x90/0xf8
[<00000000c705776a>] dump_stack+0xba/0x108
[<00000000c705d91c>] check_preemption_disabled+0xec/0xf0
[<00000000c63eb1c4>] cf_diag_needspace+0x2c/0x100
[<00000000c63ecbcc>] cf_diag_ioctl_start+0x10c/0x240
[<00000000c63ece9a>] cf_diag_ioctl+0x19a/0x238
[<00000000c675f3f4>] __s390x_sys_ioctl+0xc4/0x100
[<00000000c63ca762>] do_syscall+0x82/0xd0
[<00000000c705bdd8>] __do_syscall+0xc0/0xd8
[<00000000c706d532>] system_call+0x72/0x98
2 locks held by psvc-readsets/7759:
#0: 00000000c75a57c0 (cpu_hotplug_lock){++++}-{0:0},
at: cf_diag_ioctl+0x44/0x238
#1: 00000000c75a3078 (cf_diag_ctrset_mutex){+.+.}-{3:3},
at: cf_diag_ioctl+0x54/0x238
This issue is a missing get_cpu_ptr/put_cpu_ptr pair in function
cf_diag_needspace. Add it.
Fixes: cf6acb8bdb1d ("s390/cpumf: Add support for complete counter set extraction")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of irqchip updates:
- Make the GENERIC_IRQ_MULTI_HANDLER configuration correct
- Add a missing DT compatible string for the Ingenic driver
- Remove the pointless debugfs_file pointer from struct irqdomain"
* tag 'irq-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ingenic: Add support for the JZ4760
dt-bindings/irq: Add compatible string for the JZ4760B
irqchip: Do not blindly select CONFIG_GENERIC_IRQ_MULTI_HANDLER
ARM: ep93xx: Select GENERIC_IRQ_MULTI_HANDLER directly
irqdomain: Remove debugfs_file from struct irq_domain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Thomas Gleixner:
"A single objtool fix to handle the PUSHF/POPF validation correctly for
the paravirt changes which modified arch_local_irq_restore not to use
popf"
* tag 'objtool-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool,x86: Fix uaccess PUSHF/POPF validation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Make sure PMU internal buffers are flushed for per-CPU events too and
properly handle PID/TID for large PEBS.
- Handle the case properly when there's no PMU and therefore return an
empty list of perf MSRs for VMX to switch instead of reading random
garbage from the stack.
* tag 'perf_urgent_for_v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/perf: Use RET0 as default for guest_get_msrs to handle "no PMU" case
perf/x86/intel: Set PERF_ATTACH_SCHED_CB for large PEBS and LBR
perf/core: Flush PMU internal buffers for per-CPU events
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- A couple of SEV-ES fixes and robustifications: verify usermode stack
pointer in NMI is not coming from the syscall gap, correctly track
IRQ states in the #VC handler and access user insn bytes atomically
in same handler as latter cannot sleep.
- Balance 32-bit fast syscall exit path to do the proper work on exit
and thus not confuse audit and ptrace frameworks.
- Two fixes for the ORC unwinder going "off the rails" into KASAN
redzones and when ORC data is missing.
* tag 'x86_urgent_for_v5.12_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev-es: Use __copy_from_user_inatomic()
x86/sev-es: Correctly track IRQ states in runtime #VC handler
x86/sev-es: Check regs->sp is trusted before adjusting #VC IST stack
x86/sev-es: Introduce ip_within_syscall_gap() helper
x86/entry: Fix entry/exit mismatch on failed fast 32-bit syscalls
x86/unwind/orc: Silence warnings caused by missing ORC data
x86/unwind/orc: Disable KASAN checking in the ORC unwinder, part 2
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.12:
- Fix wrong instruction encoding for lis in ppc_function_entry(),
which could potentially lead to missed kprobes.
- Fix SET_FULL_REGS on 32-bit and 64e, which prevented ptrace of
non-volatile GPRs immediately after exec.
- Clean up a missed SRR specifier in the recent interrupt rework.
- Don't treat unrecoverable_exception() as an interrupt handler, it's
called from other handlers so shouldn't do the interrupt entry/exit
accounting itself.
- Fix build errors caused by missing declarations for
[en/dis]able_kernel_vsx().
Thanks to Christophe Leroy, Daniel Axtens, Geert Uytterhoeven, Jiri
Olsa, Naveen N. Rao, and Nicholas Piggin"
* tag 'powerpc-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/traps: unrecoverable_exception() is not an interrupt handler
powerpc: Fix missing declaration of [en/dis]able_kernel_vsx()
powerpc/64s/exception: Clean up a missed SRR specifier
powerpc: Fix inverted SET_FULL_REGS bitop
powerpc/64s: Use symbolic macros for function entry encoding
powerpc/64s: Fix instruction encoding for lis in ppc_function_entry()
|
|
Pull KVM fixes from Paolo Bonzini:
"More fixes for ARM and x86"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: LAPIC: Advancing the timer expiration on guest initiated write
KVM: x86/mmu: Skip !MMU-present SPTEs when removing SP in exclusive mode
KVM: kvmclock: Fix vCPUs > 64 can't be online/hotpluged
kvm: x86: annotate RCU pointers
KVM: arm64: Fix exclusive limit for IPA size
KVM: arm64: Reject VM creation when the default IPA size is unsupported
KVM: arm64: Ensure I-cache isolation between vcpus of a same VM
KVM: arm64: Don't use cbz/adr with external symbols
KVM: arm64: Fix range alignment when walking page tables
KVM: arm64: Workaround firmware wrongly advertising GICv2-on-v3 compatibility
KVM: arm64: Rename __vgic_v3_get_ich_vtr_el2() to __vgic_v3_get_gic_config()
KVM: arm64: Don't access PMSELR_EL0/PMUSERENR_EL0 when no PMU is available
KVM: arm64: Turn kvm_arm_support_pmu_v3() into a static key
KVM: arm64: Fix nVHE hyp panic host context restore
KVM: arm64: Avoid corrupting vCPU context register in guest exit
KVM: arm64: nvhe: Save the SPE context early
kvm: x86: use NULL instead of using plain integer as pointer
KVM: SVM: Connect 'npt' module param to KVM's internal 'npt_enabled'
KVM: x86: Ensure deadline timer has truly expired before posting its IRQ
|
|
Merge misc fixes from Andrew Morton:
"28 patches.
Subsystems affected by this series: mm (memblock, pagealloc, hugetlb,
highmem, kfence, oom-kill, madvise, kasan, userfaultfd, memcg, and
zram), core-kernel, kconfig, fork, binfmt, MAINTAINERS, kbuild, and
ia64"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (28 commits)
zram: fix broken page writeback
zram: fix return value on writeback_store
mm/memcg: set memcg when splitting page
mm/memcg: rename mem_cgroup_split_huge_fixup to split_page_memcg and add nr_pages argument
ia64: fix ptrace(PTRACE_SYSCALL_INFO_EXIT) sign
ia64: fix ia64_syscall_get_set_arguments() for break-based syscalls
mm/userfaultfd: fix memory corruption due to writeprotect
kasan: fix KASAN_STACK dependency for HW_TAGS
kasan, mm: fix crash with HW_TAGS and DEBUG_PAGEALLOC
mm/madvise: replace ptrace attach requirement for process_madvise
include/linux/sched/mm.h: use rcu_dereference in in_vfork()
kfence: fix reports if constant function prefixes exist
kfence, slab: fix cache_alloc_debugcheck_after() for bulk allocations
kfence: fix printk format for ptrdiff_t
linux/compiler-clang.h: define HAVE_BUILTIN_BSWAP*
MAINTAINERS: exclude uapi directories in API/ABI section
binfmt_misc: fix possible deadlock in bm_register_write
mm/highmem.c: fix zero_user_segments() with start > end
hugetlb: do early cow when page pinned on src mm
mm: use is_cow_mapping() across tree where proper
...
|
|
The code relies on constant folding of cpu_has_feature() based
on possible and always true values as defined per
CPU_FTRS_ALWAYS and CPU_FTRS_POSSIBLE.
Build failure is encountered with for instance
book3e_all_defconfig on kisskb in the AMDGPU driver which uses
cpu_has_feature(CPU_FTR_VSX_COMP) to decide whether calling
kernel_enable_vsx() or not.
The failure is due to cpu_has_feature() not being inlined with
that configuration with gcc 4.9.
In the same way as commit acdad8fb4a15 ("powerpc: Force inlining of
mmu_has_feature to fix build failure"), for inlining of
cpu_has_feature().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b231dfa040ce4cc37f702f5c3a595fdeabfe0462.1615378209.git.christophe.leroy@csgroup.eu
|
|
With some defconfig including CONFIG_CC_OPTIMIZE_FOR_SIZE,
(for instance mvme5100_defconfig and ps3_defconfig), gcc 5
generates a call to _restgpr_31_x.
Until recently it went unnoticed, but
commit 42ed6d56ade2 ("powerpc/vdso: Block R_PPC_REL24 relocations")
made it rise to the surface.
Provide that function (copied from lib/crtsavres.S) in
gettimeofday.S
Fixes: ab037dd87a2f ("powerpc/vdso: Switch VDSO to generic C implementation.")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a7aa198a88bcd33c6e35e99f70f86c7b7f2f9440.1615270757.git.christophe.leroy@csgroup.eu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- avoid 'make image_name' invoking syncconfig
- fix a couple of bugs in scripts/dummy-tools
- fix LLD_VENDOR and locale issues in scripts/ld-version.sh
- rebuild GCC plugins when the compiler is upgraded
- allow LTO to be enabled with KASAN_HW_TAGS
- allow LTO to be enabled without LLVM=1
* tag 'kbuild-fixes-v5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: fix ld-version.sh to not be affected by locale
kbuild: remove meaningless parameter to $(call if_changed_rule,dtc)
kbuild: remove LLVM=1 test from HAS_LTO_CLANG
kbuild: remove unneeded -O option to dtc
kbuild: dummy-tools: adjust to scripts/cc-version.sh
kbuild: Allow LTO to be selected with KASAN_HW_TAGS
kbuild: dummy-tools: support MPROFILE_KERNEL checks for ppc
kbuild: rebuild GCC plugins when the compiler is upgraded
kbuild: Fix ld-version.sh script if LLD was built with LLD_VENDOR
kbuild: dummy-tools: fix inverted tests for gcc
kbuild: add image_name to no-sync-config-targets
|
|
In https://bugs.gentoo.org/769614 Dmitry noticed that
`ptrace(PTRACE_GET_SYSCALL_INFO)` does not return error sign properly.
The bug is in mismatch between get/set errors:
static inline long syscall_get_error(struct task_struct *task,
struct pt_regs *regs)
{
return regs->r10 == -1 ? regs->r8:0;
}
static inline long syscall_get_return_value(struct task_struct *task,
struct pt_regs *regs)
{
return regs->r8;
}
static inline void syscall_set_return_value(struct task_struct *task,
struct pt_regs *regs,
int error, long val)
{
if (error) {
/* error < 0, but ia64 uses > 0 return value */
regs->r8 = -error;
regs->r10 = -1;
} else {
regs->r8 = val;
regs->r10 = 0;
}
}
Tested on v5.10 on rx3600 machine (ia64 9040 CPU).
Link: https://lkml.kernel.org/r/20210221002554.333076-2-slyfox@gentoo.org
Link: https://bugs.gentoo.org/769614
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Reported-by: Dmitry V. Levin <ldv@altlinux.org>
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In https://bugs.gentoo.org/769614 Dmitry noticed that
`ptrace(PTRACE_GET_SYSCALL_INFO)` does not work for syscalls called via
glibc's syscall() wrapper.
ia64 has two ways to call syscalls from userspace: via `break` and via
`eps` instructions.
The difference is in stack layout:
1. `eps` creates simple stack frame: no locals, in{0..7} == out{0..8}
2. `break` uses userspace stack frame: may be locals (glibc provides
one), in{0..7} == out{0..8}.
Both work fine in syscall handling cde itself.
But `ptrace(PTRACE_GET_SYSCALL_INFO)` uses unwind mechanism to
re-extract syscall arguments but it does not account for locals.
The change always skips locals registers. It should not change `eps`
path as kernel's handler already enforces locals=0 and fixes `break`.
Tested on v5.10 on rx3600 machine (ia64 9040 CPU).
Link: https://lkml.kernel.org/r/20210221002554.333076-1-slyfox@gentoo.org
Link: https://bugs.gentoo.org/769614
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Reported-by: Dmitry V. Levin <ldv@altlinux.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"We've got a smattering of changes all over the place which we've
acrued since -rc1. To my knowledge, there aren't any pending issues at
the moment, but there's still plenty of time for something else to
crop up...
Summary:
- Fix booting a 52-bit-VA-aware kernel on Qualcomm Amberwing
- Fix pfn_valid() not to reject all ZONE_DEVICE memory
- Fix memory tagging setup for hotplugged memory regions
- Fix KASAN tagging in page_alloc() when DEBUG_VIRTUAL is enabled
- Fix accidental truncation of CPU PMU event counters
- Fix error code initialisation when failing probe of DMC620 PMU
- Fix return value initialisation for sve-ptrace selftest
- Drop broken support for CMDLINE_EXTEND"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
perf/arm_dmc620_pmu: Fix error return code in dmc620_pmu_device_probe()
arm64: mm: remove unused __cpu_uses_extended_idmap[_level()]
arm64: mm: use a 48-bit ID map when possible on 52-bit VA builds
arm64: perf: Fix 64-bit event counter read truncation
arm64/mm: Fix __enable_mmu() for new TGRAN range values
kselftest: arm64: Fix exit code of sve-ptrace
arm64: mte: Map hotplugged memory as Normal Tagged
arm64: kasan: fix page_alloc tagging with DEBUG_VIRTUAL
arm64/mm: Reorganize pfn_valid()
arm64/mm: Fix pfn_valid() for ZONE_DEVICE based memory
arm64/mm: Drop THP conditionality from FORCE_MAX_ZONEORDER
arm64/mm: Drop redundant ARCH_WANT_HUGE_PMD_SHARE
arm64: Drop support for CMDLINE_EXTEND
arm64: cpufeatures: Fix handling of CONFIG_CMDLINE for idreg overrides
|
