diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2015-07-25 20:11:12 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2015-07-25 20:11:12 -0700 |
commit | 26ae19a3883c9d595e9100fd10b856a7cf1a949a (patch) | |
tree | 0a67cd5675f782d5ce3416a8031ecf971b60ac02 /drivers/usb/host/xhci-pci.c | |
parent | 82b35f376c71fbd60f5ea0ce27b3c835fa50ed6d (diff) | |
parent | 1209544d8a2a6084f58625ca66f5cd77580df53f (diff) |
Merge tag 'usb-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here's a few USB and PHY fixes for 4.2-rc4.
Nothing major, the shortlog has the full details.
All of these have been in linux-next successfully"
* tag 'usb-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
USB: OHCI: fix bad #define in ohci-tmio.c
cdc-acm: Destroy acm_minors IDR on module exit
usb-storage: Add ignore-device quirk for gm12u320 based usb mini projectors
usb-storage: ignore ZTE MF 823 card reader in mode 0x1225
USB: OHCI: Fix race between ED unlink and URB submission
usb: core: lpm: set lpm_capable for root hub device
xhci: do not report PLC when link is in internal resume state
xhci: prevent bus_suspend if SS port resuming in phase 1
xhci: report U3 when link is in resume state
xhci: Calculate old endpoints correctly on device reset
usb: xhci: Bugfix for NULL pointer deference in xhci_endpoint_init() function
xhci: Workaround to get D3 working in Intel xHCI
xhci: call BIOS workaround to enable runtime suspend on Intel Braswell
usb: dwc3: Reset the transfer resource index on SET_INTERFACE
usb: gadget: udc: core: Fix argument of dma_map_single for IOMMU
usb: gadget: mv_udc_core: fix phy_regs I/O memory leak
usb: ulpi: ulpi_init should be executed in subsys_initcall
phy: berlin-usb: fix divider for BG2
phy: berlin-usb: fix divider for BG2CD
phy/pxa: add HAS_IOMEM dependency
...
Diffstat (limited to 'drivers/usb/host/xhci-pci.c')
-rw-r--r-- | drivers/usb/host/xhci-pci.c | 57 |
1 files changed, 54 insertions, 3 deletions
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 4a4cb1d91ac8..5590eac2b22d 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -23,10 +23,15 @@ #include <linux/pci.h> #include <linux/slab.h> #include <linux/module.h> +#include <linux/acpi.h> #include "xhci.h" #include "xhci-trace.h" +#define PORT2_SSIC_CONFIG_REG2 0x883c +#define PROG_DONE (1 << 30) +#define SSIC_PORT_UNUSED (1 << 31) + /* Device for a quirk */ #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 @@ -176,20 +181,63 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) } /* + * In some Intel xHCI controllers, in order to get D3 working, + * through a vendor specific SSIC CONFIG register at offset 0x883c, + * SSIC PORT need to be marked as "unused" before putting xHCI + * into D3. After D3 exit, the SSIC port need to be marked as "used". + * Without this change, xHCI might not enter D3 state. * Make sure PME works on some Intel xHCI controllers by writing 1 to clear * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4 */ -static void xhci_pme_quirk(struct xhci_hcd *xhci) +static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend) { + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); u32 val; void __iomem *reg; + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) { + + reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2; + + /* Notify SSIC that SSIC profile programming is not done */ + val = readl(reg) & ~PROG_DONE; + writel(val, reg); + + /* Mark SSIC port as unused(suspend) or used(resume) */ + val = readl(reg); + if (suspend) + val |= SSIC_PORT_UNUSED; + else + val &= ~SSIC_PORT_UNUSED; + writel(val, reg); + + /* Notify SSIC that SSIC profile programming is done */ + val = readl(reg) | PROG_DONE; + writel(val, reg); + readl(reg); + } + reg = (void __iomem *) xhci->cap_regs + 0x80a4; val = readl(reg); writel(val | BIT(28), reg); readl(reg); } +#ifdef CONFIG_ACPI +static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) +{ + static const u8 intel_dsm_uuid[] = { + 0xb7, 0x0c, 0x34, 0xac, 0x01, 0xe9, 0xbf, 0x45, + 0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23, + }; + acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), intel_dsm_uuid, 3, 1, NULL); +} +#else + static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { } +#endif /* CONFIG_ACPI */ + /* called during probe() after chip reset completes */ static int xhci_pci_setup(struct usb_hcd *hcd) { @@ -263,6 +311,9 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) HCC_MAX_PSA(xhci->hcc_params) >= 4) xhci->shared_hcd->can_do_streams = 1; + if (xhci->quirks & XHCI_PME_STUCK_QUIRK) + xhci_pme_acpi_rtd3_enable(dev); + /* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */ pm_runtime_put_noidle(&dev->dev); @@ -307,7 +358,7 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) pdev->no_d3cold = true; if (xhci->quirks & XHCI_PME_STUCK_QUIRK) - xhci_pme_quirk(xhci); + xhci_pme_quirk(hcd, true); return xhci_suspend(xhci, do_wakeup); } @@ -340,7 +391,7 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) usb_enable_intel_xhci_ports(pdev); if (xhci->quirks & XHCI_PME_STUCK_QUIRK) - xhci_pme_quirk(xhci); + xhci_pme_quirk(hcd, false); retval = xhci_resume(xhci, hibernated); return retval; |